ProForm Home Gym PFEX01010 User Manual

Model No. PFEX01010  
Serial No.  
USER'S MANUAL  
Serial  
Number  
Decal  
QUESTIONS?  
If you have questions, or if there  
are missing or damaged parts,  
we will guarantee complete sat-  
isfaction through direct assis-  
tance from our factory.  
TO AVOID UNNECESSARY  
DELAYS, PLEASE CALL DIRECT  
TO OUR TOLL-FREE CUSTOMER  
HOT LINE. The trained techni-  
cians on our customer hot line  
will provide immediate assis-  
tance, free of charge to you.  
Patent Pending  
CUSTOMER HOT LINE:  
1-800-999-3756  
Mon.–Fri., 6 a.m.–6 p.m. MST  
CAUTION  
Read all precautions and instruc-  
tions in this manual before using  
this equipment. Keep this manual  
for future reference.  
Visit our website at  
new products, prizes,  
fitness tips, and much more!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE YOU BEGIN  
Congratulations for selecting the new PROFORM® VR  
900 EKG recumbent cycle. Cycling is one of the most  
effective exercises for increasing cardiovascular fit-  
ness, building endurance, and toning the entire body.  
The PROFORM® VR 900 EKG offers an impressive  
array of features to let you enjoy this healthful exer-  
cise in the convenience and privacy of your home.  
Department toll-free at 1-800-999-3756, Monday  
through Friday, 6 a.m. until 6 p.m. Mountain Time  
(excluding holidays). To help us assist you, please  
note the product model number and serial number  
before calling. The model number is PFEX01010. The  
serial number can be found on a decal attached to the  
recumbent cycle (see the front cover of this manual).  
For your benefit, read this manual carefully before  
you use the PROFORM® VR 900 EKG. If you have  
additional questions, please call our Customer Service  
Before reading further, please familiarize yourself with  
the parts that are labeled in the drawing below.  
Console  
Water Bottle Holder*  
Resistance Knob  
Book Holder  
Handlebar  
Pulse Sensor  
FRONT  
Backrest  
Seat  
Pedal Strap  
Pedal  
Seat Knob  
REAR  
RIGHT SIDE  
*No water bottle  
is included  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
Assembly requires two persons. Place all parts of the recumbent cycle in a cleared area and remove the pack-  
ing materials. Do not dispose of the packing materials until assembly is completed.  
Assembly requires the included tools and your own adjustable wrench  
driver  
and Phillips screw-  
.
Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below  
each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers  
to the quantity needed for assembly. Note: Some small parts may have been pre-attached for shipping. If a  
part is not in the parts bag, check to see if it has been pre-attached.  
M4 x 16mm  
Screw (21)–7  
M10 Split  
Washer (17)–10  
M6 Washer (54)–3  
M8 Washer (55)–7  
M6 x 22mm Button  
M6 Nylon  
Locknut (15)–4  
M10 Nylon  
Locknut (45)–2  
Screw (29)–4  
M8 x 38mm Button  
Bolt (24)–4  
M10 x 25mm Button  
Screw (71)–10  
M10 x 75mm Carriage Bolt (72)–2  
M6 x 38mm Button  
Bolt (14)–7  
M8 x 100mm Button Bolt (63)–3  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. While another person holds the Upright (6) in the  
position shown, connect the Extension Wire (18) to  
the Reed Switch Wire (20). Refer to the inset drawing.  
Make sure that the plastic sheath is in the location  
shown. Insert the tip of the Resistance Cable (22) into  
the indicated opening in the Cable Connector (69).  
Then, pull up on the Resistance Cable and insert it  
into the top of the Cable Connector. Center the sheath  
on the Cable Connector.  
1
6
Side  
Front  
22  
17  
71  
Side  
17  
71  
Carefully slide the Upright (6) onto the Frame (1). Be  
careful to avoid pinching the wires and cables.  
Loosely thread four M10 x 25mm Button Screws (71)  
with M10 Split Washers (17) through the Upright and  
into the Frame. Secure the tops of the Side Shields  
(4, 5) with two M4 x 16mm Screws (21). Firmly tight-  
en the four Button Screws in the following order:  
front, rear, and then sides.  
69  
22  
69  
18  
Rear  
5
20  
Sheath  
21  
21  
1
Sheath  
4
2. Attach the Front Stabilizer (2) to the front of the  
Frame (1) with two M10 x 75mm Carriage Bolts (72)  
and two M10 Nylon Locknuts (45).  
2
2
72  
1
45  
3. While another person holds the Handlebar (16) near  
the Upright (6), route the Pulse Wires (33) up  
through the two indicated holes in the Upright.  
3
18  
Hole  
16  
Attach the Handlebar (16) to the Upright (6) with two  
M10 x 25mm Button Screws (71) and two M10 Split  
Washers (17). Do not tighten the Button Screws  
yet. Make sure that no wires are pinched  
Hole  
33  
6
between the Handlebar and the Upright.  
17  
71  
17  
4. The Console (9) requires two “AA” batteries (not  
included). Alkaline batteries are recommended. To  
install batteries, turn the console over, open the bat-  
tery door, and insert two batteries into the battery  
clip as shown. Make sure that the negative ends  
of the batteries (marked “—”) are touching the  
springs in the battery clip. Close the battery door.  
4
9
Batteries  
Battery  
Clip  
Battery  
Door  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Hold the Console (9) near the Upright (6) as shown.  
Identify the green console ground wire and attach it  
to the Upright with an M4 x 16mm Screw (21).  
5
9
Console  
Wires  
Next, connect the Reed Switch Wire (18) and the  
two Pulse Wires (33) to the corresponding wires on  
the Console (9).  
Console  
Ground  
Wire  
18  
6
33  
21  
6. Attach the Console (9) to the Handlebar Post (6)  
with four M4 x 16mm Screws (21). Make sure that  
no wires are pinched between the Console and  
the Handlebar Post.  
6
9
75  
Press the Resistance Knob (75) onto the Resistance  
Control (22).  
22  
Refer to step 3. Tighten the two M10 x 25mm Button  
Screws (71) used in step 3.  
6
21  
7. Slide the Carriage Bar (7) onto the indicated tube on  
the Frame (1). Attach the Carriage Bar to the Frame  
with four M10 x 25mm Button Screws (71) and four  
M10 Split Washers (17).  
7
1
71  
11  
17  
74  
Slide the Seat Carriage (11) onto the Carriage Bar  
(7) as shown. Thread the Seat Knob (74) clockwise  
into the Seat Carriage until it is tight.  
71  
7
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Hold the Rear Stabilizer (3) under the Carriage Bar  
(7) in the position shown. Attach the Rear Stabilizer  
to the Carriage Bar with three M8 x 100mm Button  
Bolts (63) and three M8 Washers (55).  
8
63  
63  
55  
55  
7
3
9. Insert the lower end of the Backrest Frame (8) into  
the Seat Frame (27). Attach the Seat Frame and the  
Backrest Frame to the Seat Carriage (11) with four  
M8 x 38mm Button Bolts (24).  
9
24  
24  
27  
8
11  
10. Slide a Seat Handle (61) onto one side of the  
Backrest Frame (8). Attach the Seat Handle with  
two M6 x 38mm Button Bolts (14) and two M6 Nylon  
Locknuts (15).  
10  
8
Attach the other Seat Handle (not shown) to the  
other side of the Backrest Frame (8).  
15  
14  
61  
11. Attach the Seat (12) to the Seat Frame (27) with  
four M6 x 22mm Button Screws (29) and four M8  
Washers (55).  
11  
12  
27  
55  
29  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
12. Attach the Backrest (13) to the Backrest Frame (8)  
with three M6 x 38mm Button Bolts (14) and three  
M6 Washers (54).  
12  
13  
8
54  
14  
13. Identify the Left Pedal (40), which is marked with an  
“L.” Using an adjustable wrench, firmly tighten the  
Left Pedal counterclockwise into the left Crank Arm  
(19). Tighten the Right Pedal (not shown) clockwise  
into the right Crank Arm. Important: Tighten both  
Pedals as firmly as possible. After using the  
recumbent cycle for one week, retighten the  
Pedals. For best performance, the Pedals must  
be kept tightened.  
13  
41  
40  
Tab  
Adjust the Left Pedal Strap (41) to the desired posi-  
tion and press the end of the Pedal Strap onto the  
tab on the Left Pedal (40). Adjust the Right Pedal  
Strap (not shown) in the same way.  
19  
14. Make sure that all parts are properly tightened before you use the recumbent cycle. Note: After assembly  
is completed, some extra parts may be left over. Place a mat beneath the recumbent cycle to protect the floor.  
HOW TO OPERATE THE RECUMBENT CYCLE  
HOW TO ADJUST THE RESISTANCE  
HOW TO ADJUST THE PEDAL STRAPS  
To increase the  
resistance of the  
pedals, turn the  
To adjust the pedal  
straps, first pull the  
straps off the tabs  
on the pedals.  
Strap  
Resistance  
Knob  
resistance knob  
clockwise; to  
decrease the  
resistance, turn  
Press the straps  
back onto the tabs  
using different  
Tab  
the knob counter-  
holes in the straps.  
clockwise.  
Important: Stop  
turning the knob when turning becomes difficult, or  
damage may result.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO ADJUST THE POSITION OF THE SEAT  
DESCRIPTION OF THE CONSOLE  
For effective exer-  
cise, the seat  
Seat  
Mode On/Reset  
Button Button  
should be in the  
proper position. As  
you pedal, there  
should be a slight  
bend in your knees  
when the pedals  
are in the farthest  
position. To adjust  
the seat, first turn  
Seat  
Knob  
the seat knob counterclockwise to loosen it (if the seat  
knob is not loosened enough, it may scratch the  
frame). Next, slide the seat to the desired position, and  
then retighten the seat knob. IMPORTANT: After you  
adjust the seat, make sure that your knees will not  
touch the handlebar or the console when you  
pedal.  
The innovative console features six modes that pro-  
vide instant exercise feedback during your workouts:  
Speed—Displays your pedaling speed, in  
miles per hour.  
HOW TO INSTALL BATTERIES  
The console requires two “AA” batteries (not includ-  
ed). Alkaline batteries are recommended. Locate the  
battery door on the back of the console. Open the  
battery door and insert two batteries into the battery  
clip as shown in the drawing below. Make sure that  
the negative ends of the batteries (marked “—”)  
are touching the springs in the battery clip. Close  
the battery door.  
Time—Displays the elapsed time. Note: If you  
stop pedaling for ten seconds or longer, the  
time mode will pause until you resume.  
Distance—Displays the total distance you  
have pedaled, in miles.  
Fat Calories—Displays the approximate num-  
ber of fat calories you have burned. (See  
BURNING FAT on page 12.)  
Console  
Batteries  
Calories—Displays the approximate number  
of calories you have burned.  
Scan—Displays the speed, time, distance, fat  
calories, and calories modes, for 5 seconds  
each, in a repeating cycle.  
Battery  
Clip  
Battery  
Door  
Pulse—This mode shows your heart rate  
when the pulse sensor is used.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO OPERATE THE CONSOLE  
HOW TO USE THE PULSE SENSOR  
Note: The console requires two “AA” batteries. See  
assembly step 4 on page 5 for battery installation  
instructions.  
Note: Before you use the pulse sensor, you must  
peel the protective vinyl covering off the metal  
contacts on the top and bottom of the pulse sensor.  
1. To turn on the power, press the on/reset button or  
simply begin pedaling. When the power is turned  
on, the entire display will appear for two seconds.  
The console will then be ready for operation.  
To use the pulse  
sensor, place  
your hands on  
the metal con-  
tacts. Your  
2. Select one of the six modes:  
Scan mode—  
palms must be  
resting on the  
upper contacts  
Metal  
Contacts  
Mode Arrows  
When the power  
and your fingers  
is turned on, the  
must be touch-  
scan mode will  
ing the lower  
automatically be  
contacts. Avoid moving your hands.  
selected. One  
mode arrow will  
show that the  
scan mode is  
selected, and a  
flashing mode arrow will show which mode is cur-  
rently displayed. Note: If a different mode is select-  
ed, you can select the scan mode again by repeat-  
edly pressing the mode button.  
After a moment, the heart-shaped indicator in the dis-  
play will begin to flash, three dashes (– – –) will  
appear and then your heart rate will be shown. For  
the most accurate heart rate reading, continue to hold  
the contacts for about 15 seconds.  
Note: If your heart rate is not shown, press the  
on/reset button to reset the pulse sensor. In addi-  
tion, make sure that your hands are positioned as  
described above. Be careful not to move your hands  
excessively or squeeze the metal contacts too tightly.  
Speed, time, dis-  
Mode Arrow  
tance, fat calo-  
ries, or calories  
mode—To select  
one of these  
modes for contin-  
uous display,  
press the mode  
button repeated-  
ly. The mode arrows will show which mode is  
selected. Make sure that the scan mode is not  
selected.  
WARNING:  
The pulse sensor is  
not a medical device. Various factors,  
including the user's movement, may affect  
the accuracy of heart rate readings. The  
pulse sensor is intended only as an exercise  
aid in determining heart rate trends in general.  
3. To reset the display, press the on/reset button.  
4. To turn off the power, simply wait for about four  
minutes. Note: The monitor has an “auto-off”  
feature. If the pedals are not moved and the  
monitor buttons are not pressed for four min-  
utes, the power will turn off automatically in  
order to conserve the batteries.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE AND TROUBLE-SHOOTING  
Inspect and properly tighten all parts of the recumbent  
cycle regularly. To clean the recumbent cycle, use a  
soft, damp cloth. To prevent damage to the console,  
keep liquids away from the console and keep the con-  
sole out of direct sunlight.  
remove the M4 x 16mm Screw (21). Slide the Reed  
Switch slightly closer to or away from the Magnet.  
Retighten the Screw. Turn the Crank for a moment.  
Repeat until the console displays correct feedback.  
When the Reed Switch is correctly adjusted, reattach  
the left side shield and the pedal.  
TIGHTENING THE PEDALS  
HOW TO ADJUST THE BELT  
For best performance, the pedals must be kept prop-  
erly tightened. Regularly tighten both pedals.  
The recumbent cycle features a precision belt that  
must be kept properly adjusted. If the belt causes  
excessive noise or slips as you pedal, the belt should  
be checked. To do this, the side shields must first be  
removed. Refer to the instructions at the left and  
remove the left side shield. Remove the right side  
shield in the same way.  
BATTERY REPLACEMENT  
If the console does not function properly, the batteries  
should be replaced. Refer to HOW TO INSTALL BAT-  
TERIES on page 9.  
HOW TO ADJUST THE REED SWITCH  
Press down on  
the center of  
68  
If the console does not display correct feedback, the  
reed switch should be adjusted. In order to adjust the  
reed switch, the Left Side Shield (4) must be removed.  
the Belt (68)  
between the  
front and rear  
pulleys. There  
should be  
70  
21  
62  
from 1/4” to  
1” of vertical  
movement in  
the center of  
the Belt.  
56  
67  
If the Belt is properly adjusted, reattach the side  
shields and pedals. If the Belt needs to be adjusted,  
loosen the M8 Nylon Locknut (56) on each side of the  
Flywheel (70). To tighten the Belt, turn the two  
Adjustment Nuts (67) clockwise; to loosen the Belt,  
turn the Nuts counterclockwise. Make sure that the  
Flywheel is straight and tighten the M8 Nylon Locknuts  
(56). Reattach the side shields and pedals.  
40  
19  
4
62  
62  
21  
Using an adjustable wrench, turn the Left Pedal (40)  
clockwise and remove it from the Crank (19). Next,  
remove the two M4 x 16mm Screws (21) and the five  
M4 x 38mm Screws (62) from the Left Side Shield (4).  
Make sure that the left arm of the Crank is in the posi-  
tion shown above and carefully slide the Left Side  
Shield forward off the arm of the Crank.  
PULSE SENSOR TROUBLE-SHOOTING  
• Avoid moving your hands while using the pulse sen-  
sor. Excessive movement may interfere with heart  
rate readings.  
• Do not hold the metal contacts too tightly; doing so  
may interfere with heart rate readings.  
Next, locate  
the Reed  
Switch (18).  
• For the most accurate heart rate reading, hold the  
metal contacts for about 15 seconds.  
21  
31  
Turn the Crank  
(19) until the  
Magnet (31) is  
aligned with  
the Reed  
• For optimal performance of the pulse sensor, keep  
the metal contacts clean. The contacts can be  
cleaned with a soft cloth—never use alcohol,  
abrasives, or chemicals.  
18  
19  
Switch. Loosen  
but do not  
Front View  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONDITIONING GUIDELINES  
The following guidelines will help you to plan your  
exercise program. Remember that proper nutrition  
and adequate rest are essential for successful results.  
Burning Fat  
To burn fat effectively, you must exercise at a relative-  
ly low intensity level for a sustained period of time.  
During the first few minutes of exercise, your body  
uses easily accessible carbohydrate calories for ener-  
gy. Only after the first few minutes of exercise does  
your body begin to use stored fat calories for energy.  
If your goal is to burn fat, adjust the intensity of your  
exercise until your heart rate is near the lowest num-  
ber in your training zone as you exercise. For maxi-  
mum fat burning, adjust the intensity of your exercise  
until your heart rate is near the middle number in your  
training zone as you exercise.  
WARNING:  
Before beginning  
this or any exercise program, consult your  
physician. This is especially important for  
persons over the age of 35 or persons with  
pre-existing health problems.  
The pulse sensor is not a medical device.  
Various factors may affect the accuracy of  
heart rate readings. The pulse sensor is  
intended only as an exercise aid in determin-  
ing heart rate trends in general.  
Aerobic Exercise  
If your goal is to strengthen your cardiovascular sys-  
tem, your exercise must be “aerobic.” Aerobic exer-  
cise is activity that requires large amounts of oxygen  
for prolonged periods of time. This increases the  
demand on the heart to pump blood to the muscles,  
and on the lungs to oxygenate the blood. For aerobic  
exercise, adjust the intensity of your exercise until  
your heart rate is near the highest number in your  
training zone.  
EXERCISE INTENSITY  
Whether your goal is to burn fat or to strengthen your  
cardiovascular system, the key to achieving the  
desired results is to exercise with the proper intensity.  
The proper intensity level can be found by using your  
heart rate as a guide. The chart below shows recom-  
mended heart rates for fat burning, maximum fat  
burning, and cardiovascular (aerobic) exercise.  
WORKOUT GUIDELINES  
Each workout should include the following three parts:  
A warm-up, consisting of 5 to 10 minutes of stretching  
(see page 13) and light exercise. A proper warm-up  
increases your body temperature, heart rate, and cir-  
culation in preparation for exercise.  
Training zone exercise, consisting of 20 to 30 min-  
utes of exercising with your heart rate in your training  
zone. (During the first few weeks of your exercise pro-  
gram, do not keep your heart rate in your training  
zone for longer than 20 minutes.)  
To find the proper heart rate for you, first find your age  
on the bottom line of the chart (ages are rounded off  
to the nearest ten years). Next, find the three numbers  
above your age. The three numbers are your “training  
zone.” The lowest number is the recommended heart  
rate for fat burning; the middle number is the recom-  
mended heart rate for maximum fat burning; the high-  
est number is the recommended heart rate for aerobic  
exercise.  
A cool-down, with 5 to 10 minutes of stretching (see  
page 13). This will increase the flexibility of your mus-  
cles and will help to prevent post-exercise problems.  
EXERCISE FREQUENCY  
To maintain or improve your condition, plan three work-  
outs each week, with at least one day of rest between  
workouts. After a few months of regular exercise, you  
may complete up to five workouts each week, if  
desired. Remember, the key to success is make exer-  
cise a regular and enjoyable part of your everyday  
life.  
To measure your heart rate, first exercise for at least  
four minutes. Then, stop pedaling and measure your  
heart rate using the pulse sensor (see HOW TO USE  
THE PULSE SENSOR on page 10).  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SUGGESTED STRETCHES  
The correct form for several basic stretches is shown at the right.  
Move slowly as you stretch—never bounce.  
1
1. Toe Touch Stretch  
Stand with your knees bent slightly and slowly bend forward from  
your hips. Allow your back and shoulders to relax as you reach down  
toward your toes as far as possible. Hold for 15 counts, then relax.  
Repeat 3 times. Stretches: Hamstrings, back of knees and back.  
2. Hamstring Stretch  
2
Sit with one leg extended. Bring the sole of the opposite foot toward  
you and rest it against the inner thigh of your extended leg. Reach  
toward your toes as far as possible. Hold for 15 counts, then relax.  
Repeat 3 times for each leg. Stretches: Hamstrings, lower back and  
groin.  
3. Calf/Achilles Stretch  
3
With one leg in front of the other, reach forward and place your hands  
against a wall. Keep your back leg straight and your back foot flat on  
the floor. Bend your front leg, lean forward and move your hips  
toward the wall. Hold for 15 counts, then relax. Repeat 3 times for  
each leg. To cause further stretching of the achilles tendons, bend  
your back leg as well. Stretches: Calves, achilles tendons and ankles.  
4
4. Quadriceps Stretch  
With one hand against a wall for balance, reach back and grasp one  
foot with your other hand. Bring your heel as close to your buttocks  
as possible. Hold for 15 counts, then relax. Repeat 3 times for each  
leg. Stretches: Quadriceps and hip muscles.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO ORDER REPLACEMENT PARTS  
To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through  
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give  
the following information:  
• The MODEL NUMBER of the product (PFEX01010)  
• The NAME of the product (PROFORM® VR 900 EKG recumbent cycle)  
• The SERIAL NUMBER of the product (see the front cover of this manual)  
• The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 14 of this manual).  
PROFORM is a registered trademark of ICON Health & Fitness, Inc.  
LIMITED WARRANTY  
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and  
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-  
chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-  
ited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.  
All repairs for which warranty claims are made must be pre-authorized by ICON. This warranty does not  
extend to any product or damage to a product caused by or attributable to freight damage, abuse, mis-  
use, improper or abnormal usage or repairs not provided by an ICON authorized service center, products  
used for commercial or rental purposes, or products used as store display models. No other warranty  
beyond that specifically set forth above is authorized by ICON.  
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-  
nection with the use or performance of the product or damages with respect to any economic loss, loss  
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other  
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-  
dental or consequential damages. Accordingly, the above limitation may not apply to you.  
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of  
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth  
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above  
limitation may not apply to you.  
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.  
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813  
Part No. 178535 R0901A  
Printed in China © 2001 ICON Health & Fitness, Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips Cassette Player SAC2500 User Manual
Philips Home Theater System MX5800SA 21 User Manual
Philips Home Theater System W10162446A User Manual
Philips Power Screwdriver Nero 66 User Manual
Philips Stereo System DCM292 37 User Manual
Philips TV VCR Combo 14PV101 User Manual
POSIFLEX Business Machines Computer Monitor LM 8115 User Manual
Precor Fitness Equipment CW34864 101 User Manual
ProForm Treadmill 831297460 User Manual
PYLE Audio DJ Equipment PYD1000 User Manual