Model No. PFANBE1425.0
Serial No.
Write the serial number in the
space above for reference.
USER’S MANUAL
Serial Number Decal (under seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction.
If you have questions, or if there
are missing or damaged parts,
please call the telephone num-
ber on the warranty card accom-
panying this manual or contact
the establishment where you
purchased this product.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read the following important precautions
before using the weight bench.
1. Read all instructions in this manual and all
warnings on the weight bench before using
6. Keep hands and feet away from moving parts.
the weight bench. Use the weight bench only 7. Keep children under 12 and pets away from
as described in this manual. the weight bench at all times.
2. It is the responsibility of the owner to ensure 8. Always wear athletic shoes for foot protec-
that all users of the weight bench are ade-
quately informed of all precautions.
tion while exercising.
9. The weight bench is designed to support a
maximum of 410 pounds, including a maxi-
mum user weight of 300 pounds. Do not use
more than 110 pounds of weight with the
weight bench.
3. The weight bench is intended for home use
only. Do not use the weight bench in any
commercial, rental, or institutional setting.
4. Keep the weight bench indoors, away from
moisture and dust. Place the weight bench
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around the weight
bench to mount, dismount, and use the
weight bench.
10. Always make sure that the locking pin is fully
inserted into the pivot bracket and the frame
before exercising.
11. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cool-
ing down.
5. Inspect and properly tighten all parts regular-
ly. Replace any worn parts immediately.
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the versatile PROFORM® XP
80 weight bench. The weight bench is designed to
help develop the major muscle groups of the upper
body. Whether your goal is to tone your body, build
dramatic muscle size and strength, or improve your
cardiovascular system, the weight bench will help you
to achieve the specific results you want.
warranty card accompanying this manual. To help us
assist you, please note the product model number and
serial number before calling. The model number is
PFANBE1425.0. The serial number can be found on a
decal attached to the weight bench (see the front
cover of this manual).
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
For your benefit, read this manual carefully before
using the weight bench. If you have questions after
reading this manual, call the telephone number on the
ASSEMBLED DIMENSIONS:
Height: 54 in. / 137 cm
Width: 18 in. / 46 cm
Depth: 40 in. / 102 cm
Backrest
Seat
Locking Pin
Foam Pad
Front Leg
Pivot Bracket
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST on page 11 of this manual. Note: Some parts may have been
preassembled for shipping purposes. If you cannot find a part in the parts bags, check to see if it has
been preassembled.
M6 x 60mm Bolt (17)
M6 Washer (22)
M10 Large Washer (27)
M10 x 63mm Carriage Bolt (18)
M10 x 20mm Bolt (25)
M10 x 63mm Bolt (16)
M6 x 16mm Bolt (24)
M10 Washer (20)
M4 x 16mm Screw (28)
M10 x 70mm Bolt (26)
M10 x 85mm Bolt (23)
M10 Nylon Locknut (19)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
Make Things Easier for Yourself
This manual is designed to ensure that the
weight bench can be assembled successfully
by anyone. Most people find that by setting
aside plenty of time, assembly will go smoothly.
The included grease, and the following tools
(not included) may be required for assembly:
• Two adjustable wrenches
• One rubber mallet
Before beginning assembly, carefully read the
following information and instructions:
• One standard screwdriver
• One Phillips screwdriver
• Assembly requires two people.
• For help identifying small parts, use the PART
• Clear tape or masking tape, and soapy water.
IDENTIFICATION CHART on page 5.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
1.
Before assembling the weight bench, make
1
sure that you understand the information in
the box above.
Name
Decal
2
Attach the Front Stabilizer (29) to the Front Leg (2)
with two M10 x 63mm Carriage Bolts (18) and two
M10 Nylon Locknuts (19). Make sure the indents
in the Stabilizer and the name decal on the
Front Leg are in the positions shown. Do not
tighten the Locknuts yet.
19
19
29
Indents
18
2. Attach the Frame (1) to the Front Leg (2) with two
M10 x 63mm Bolts (16), two M10 Large Washers
(27), and two M10 Nylon Locknuts (19). Do not
tighten the Locknuts yet.
2
27
1
16
19
27
2
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Attach the Rear Stabilizer (4) to the Rear Leg (3)
with two M10 x 63mm Carriage Bolts (18) and two
M10 Nylon Locknuts (19). Make sure the indents
in the Stabilizer, and the Rear Leg are oriented
as shown. Do not tighten the Locknuts yet.
3
Warning
Decal
Indents
18
19
1
Attach the Rear Leg (3) to the Frame (1) with two
M10 x 20mm Bolts (25) and two M10 Washers
(20).
4
3
19
20
Tighten the M10 Nylon Locknuts (19) used in
steps 1–3.
25
4. Insert a Pad Tube (10) into the Front Leg (2). Wet
the ends of the Pad Tube with soapy water. Slide
two Foam Pads (9) onto the ends of the Pad
Tube.
4
9
Repeat this step with the other Pad Tube (10).
10
2
10
9
5. Attach the Pivot Bracket (6) to the Backrest
Frame (5) with two M10 x 70mm Bolts (26) and
two M10 Nylon Locknuts (19). Do not tighten the
Locknuts yet.
5
5
Insert the Pivot Bracket (6) into the slot in the
Frame (1).
19
6
26
Slot
6. Lubricate the M10 x 85mm Bolt (23) with grease.
Attach the Backrest Frame (5) to the Frame (1)
with the Bolt and an M10 Nylon Locknut (19). Do
not overtighten the Locknut; the Backrest
Frame must be able to pivot easily.
1
6
Attach the tether on the Locking Pin (21) to the
bottom of the Frame (1) with the M4 x 16mm
Screw (28).
5
Insert the Locking Pin (21) into the Frame (1) and
through an adjustment hole in the Pivot Bracket
(6).
19
1
Attach an M10 x 20mm Bolt (25) and an M10
Nylon Locknut (19) to the last hole in the Pivot
Bracket (6).
21
19
6
28
23
25
Tighten the M10 Nylon Locknuts (19) used in
step 5.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Attach the Backrest (7) to the Backrest Frame (5)
with four M6 x 16mm Bolts (24). Make sure the
Backrest is oriented as shown.
7
7
24
5
24
8. Attach the Seat (8) to the Frame (1) with four M6
x 60mm Bolts (17) and four M6 Washers (22).
Make sure the wide end of the Seat is on the
side shown.
8
8
Wide
End
1
22
22
9. Make sure all parts are properly tightened
17
before you use the weight bench.
ADJUSTMENTS
This section explains how to adjust the weight bench. See the EXERCISE GUIDELINES on page 9 for important
information about how to get the most benefit from your exercise program. Also, refer to the accompanying exer-
cise guide to see the correct form for each exercise.
Make sure all parts are properly tightened each time the weight bench is used. Replace any worn parts immediate-
ly. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents.
ADJUSTING THE BACKREST
7
The Backrest (7) can be used in a declined, a level,
or any of four inclined positions. To adjust the
Backrest, remove the Locking Pin (21) from the
Frame (1). Move the Backrest to the desired position
and reinsert the Locking Pin into the Frame and an
adjustment hole in the Pivot Bracket (6).
1
21
6
WARNING:
Always make sure the
Locking Pin (21) is fully inserted through the
Frame (1) and the Pivot Bracket (6).
Adjustment
Holes
8
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS
PERSONALIZING YOUR EXERCISE PROGRAM
Muscle Building
To increase the size and strength of your muscles,
Determining the exact length of time for each workout,
as well as the number of repetitions or sets completed,
push them close to their maximum capacity. Your mus- is an individual matter. It is important to avoid overdo-
cles will adapt and grow as you progressively increase ing it during the first few months of your exercise pro-
the intensity of your exercise. You can adjust the inten- gram. You should progress at your own pace and be
sity level of an individual exercise in two ways:
• by changing the amount of weight used
• by changing the number of repetitions or sets per-
formed. (A “repetition” is one complete cycle of an
exercise, such as one sit-up. A “set” is a series of
repetitions.)
sensitive to your body’s signals. If you experience pain
or dizziness at any time while exercising, stop immedi-
ately and begin cooling down. Find out what is wrong
before continuing. Remember that adequate rest and a
proper diet are important factors in any exercise pro-
gram.
The proper amount of weight for each exercise
depends upon the individual user. You must gauge
WARMING UP
your limits and select the amount of weight that is right Begin each workout with 5 to 10 minutes of stretching
for you. Begin with 3 sets of 8 repetitions for each
exercise you perform. Rest for 3 minutes after each
set. When you can complete 3 sets of 12 repetitions
without difficulty, increase the amount of weight.
and light exercise to warm up. Warming up prepares
your body for more strenuous exercise by increasing
circulation, raising your body temperature and deliver-
ing more oxygen to your muscles.
Toning
WORKING OUT
You can tone your muscles by pushing them to a mod-
erate percentage of their capacity. Select a moderate
amount of weight and increase the number of repeti-
tions in each set. Complete as many sets of 15 to 20
repetitions as possible without discomfort. Rest for 1
minute after each set. Work your muscles by complet-
ing more sets rather than by using high amounts of
weight.
Each workout should include 6 to 10 different exercis-
es. Select exercises for every major muscle group,
emphasizing areas that you want to develop most. To
give balance and variety to your workouts, vary the
exercises from session to session.
Schedule your workouts for the time of day when your
energy level is the highest. Each workout should be
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.
Weight Loss
To lose weight, use a low amount of weight and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.
EXERCISE FORM
Maintaining proper form is an essential part of an
effective exercise program. This requires moving
Cross Training
Cross training is an efficient way to get a complete and through the full range of motion for each exercise, and
well-balanced fitness program. An example of a bal-
anced program is:
• Plan strength training workouts on Monday,
Wednesday, and Friday.
• Plan 20 to 30 minutes of aerobic exercise, such as
running on a treadmill or riding on an exercise cycle
or an elliptical exerciser, on Tuesday and Thursday.
• Rest from both strength training and aerobic exercise
for at least one full day each week to give your body
time to regenerate.
moving only the appropriate parts of the body.
Exercising in an uncontrolled manner will leave you
feeling exhausted. On the exercise guide accompany-
ing this manual you will find photographs showing the
correct form for several exercises, and a list of the
muscles affected. Refer to the muscle chart on the
next page to find the names of the muscles.
The repetitions in each set should be performed
smoothly and without pausing. The exertion stage of
each repetition should last about half as long as the
The combination of strength training and aerobic exer- return stage. Proper breathing is important. Exhale
cise will reshape and strengthen your body, plus devel- during the exertion stage of each repetition and inhale
op your heart and lungs.
during the return stroke. Never hold your breath.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Rest for a short period of time after each set. The
ideal resting periods are:
• Rest for three minutes after each set for a muscle
building workout.
slowly as you stretch and do not bounce. Ease into
each stretch gradually and go only as far as you can
without strain. Stretching at the end of each workout
is an effective way to increase flexibility.
• Rest for one minute after each set for a toning work-
out.
STAYING MOTIVATED
• Rest for 30 seconds after each set for a weight loss
workout.
Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.
For motivation, keep a record of each workout. List the
date, the exercises performed, the resistance used,
and the numbers of sets and repetitions completed.
Record your weight and key body measurements at
the end of every month. Remember, the key to achiev-
ing the greatest results is to make exercise a regular
and enjoyable part of your everyday life.
COOLING DOWN
End each workout with 5 to 10 minutes of stretching.
Include stretches for both your arms and legs. Move
MUSCLE CHART
O
A. Sternomastoid (neck)
A
B. Pectoralis Major (chest)
C. Biceps (front of arm)
D. Obliques (waist)
P
L
Q
B
E. Brachioradials (forearm)
F. Hip Flexors (upper thigh)
G. Abductor (outer thigh)
H. Quadriceps (front of thigh)
I. Sartorius (front of thigh)
J. Tibialis Anterior (front of calf)
K. Soleus (front of calf)
R
S
C
D
E
T
F
M
N
U
L. Anterior Deltoid (shoulder)
M. Rectus Abdominus (stomach)
N. Adductor (inner thigh)
G
H
I
V
O. Trapezius (upper back)
P. Rhomboideus (upper back)
Q. Posterior Deltoid (shoulder)
R. Triceps (back of arm)
S. Latissimus Dorsi (mid back)
T. Spinae Erectors (lower back)
U. Gluteus Medius (hip)
W
X
J
K
V. Gluteus Maximus (buttocks)
W. Hamstring (back of leg)
X. Gastrocnemius (back of calf)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST/EXPLODED DRAWING—Model No. PFANBE1425.0
R1205A
15
8
22
17
5
24
7
22
17
19
11
9
11
9
17
13
26
6
19
14
24
12
1
19
19
25
27
27
16
23
13
19
21
2
18
19
12
10
28
19
11
19
3
4
9
11
20
19
20
25
29
12
12
18
Key No. Qty.
Description
Key No. Qty.
Description
M6 x 60mm Bolt
M10 x 63mm Carriage Bolt
M10 Nylon Locknut
M10 Washer
1
2
1
1
1
1
1
1
1
1
4
2
4
4
4
1
1
2
Frame
Front Leg
Rear Leg
Rear Stabilizer
Backrest Frame
Pivot Bracket
Backrest
Seat
Foam Pad
Pad Tube
17
18
19
20
21
22
23
24
25
26
27
28
29
#
4
4
10
2
1
4
1
4
3
2
2
1
1
1
1
1
3
4
5
6
Locking Pin
M6 Washer
7
8
9
M10 x 85mm Bolt
M6 x 16mm Bolt
M10 x 20mm Bolt
M10 x 70mm Bolt
M10 Large Washer
M4 x 16mm Screw
Front Stabilizer
User’s Manual
10
11
12
13
14
15
16
19mm Round Inner Cap
50mm Round Outer Cap
50mm Square Inner Cap
45mm Square Inner Cap
25mm x 50mm Inner Cap
M10 x 63mm Bolt
#
#
Exercise Guide
Grease Pack
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover of
this manual for information about ordering replacement parts.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, please call the telephone number on the warranty card accompanying this manual.
To help us assist you, be prepared to provide the following information:
• the MODEL NUMBER of the product (PFANBE1425.0)
• the NAME of the product (PROFORM XP 80 weight bench)
• the SERIAL NUMBER of the product (see the front cover of this manual)
• the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and EXPLODED DRAWING on page
11 of this manual)
Part No. 235552 R1205A
Printed in China © 2005 ICON IP, Inc,
Download from Www.Somanuals.com. All Manuals Search And Download.
|