Prince Castle Electric Steamer 625 A625 A User Manual

Steamer  
Operation  
Manual  
625-A  
Product Identification  
Temperature & Celsius/Fahrenheit &  
DOWN Arrow Button  
On/Off Rocker Switch  
(left-side of unit)  
UP Arrow Button  
Steamer  
Logo Button  
Prince Castle  
Logo Button  
Spatula  
External Meter Plug Inlet  
(for calibration)  
Product  
Buttons  
Start Button  
LED Display  
Control Panel  
(1 thru 4)  
TABLE OF CONTENTS  
LIMITED WARRANTY  
This product (with the exception of the water tube, part no. 625-197S) is  
warranted to be free from defects in material and/or work- manship for a period  
of two (2) years from date of original installation, not to exceed 30 months  
from date of shipment from our factory. P.C. Boards and Heater Assemblies  
are warranted for three (3) years from date of installation, not to exceed 42  
months from date of shipment. Any component which proves to be faulty in  
material and/or workmanship will be replaced or repaired (at the option of Prince  
Castle, Inc.) without cost to the customer for parts or labor. This warranty covers  
on location service (i.e. trip charges and/or mileage). Travel mileage is limited  
to 100 miles (200 kilometers) round trip (one trip warranty) from an authorized  
service agency or its sub-service agency.  
Product Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Temperature Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
View Firmware Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Manual Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Programming Product Name & Water Cycle . . . . . . . . . . . . . . . . . . . . . . . .4  
Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Cleaning - Daily . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Cleaning - Monthly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Exploded View and Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
This warranty is subject to the following exceptions/conditions:  
• Use of any non-genuine Prince Castle parts voids this warranty.  
• All labor shall be performed during regular work hours. Overtime premi-  
um will be charged to the buyer.  
• Damage caused by carelessness, neglect, and/or abuse (e.g., dropping,  
tampering or altering parts, equipment damaged in shipment, by fire,  
flood or an act of God) is not covered under this warranty.  
SANITATION  
355 East Kehoe Blvd. • Carol Stream, IL 60188  
Phone: 630-462-8800 • Toll Free: 1-800-PCASTLE  
revA  
Printed in USA 0910 © 2003  
Steamer 625-502  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Steamer  
625-A  
Temperature Adjustment  
A. Press and hold the TEMPERATURE button. The display will  
show the current temperature setting for Celsius (C) or  
Fahrenheit (F).  
B. While holding the TEMPERATURE button, press the C/F button  
to change the setting between Fahrenheit and Celsius.  
C. Release the TEMPERATURE button to store the new value.  
A. Press and hold the Steamer LOGO button first, then  
press and hold TEMPERATURE button for approximately  
6 seconds.  
1
2
The display will show SET TEMP.  
B. Press the Steamer LOGO button again to display the  
current set temperature.  
255  
set temp  
129 C  
255 F  
Platen temperature can be set between 129°-152°C (265°- 305°F).  
Pre-set at factory to 140°C (285°F) .  
The CAL TEMP mode is used to calibrate the platen temperature  
with an external meter connected to the meter plug inlet on the  
bottom right side of the unit. Add ± 5°C (± 10°F) .  
3
4
A. Press the UP or DOWN Arrow buttons to scroll to the  
desired temperature.  
Repeat Step 2A  
B. Press the Steamer LOGO button to store the desired  
temperature and exit the SET TEMP mode.  
A. Press the UP and DOWN Arrow buttons to scroll to CAL TEMP.  
B. Press the Steamer LOGO button again to display the current  
calibration temperature.  
C. Press the PRODUCT 2 button to zero any previous calibration  
offset value. The display will now show the platen temperature  
without any calibration offset.  
NOTE: Pressing the PRODUCT 3 button at any time exits the  
Program mode without storing the change.  
TEMP 275  
TEMP 275  
CAL 245  
CAL TEMP  
A. Press the UP or DOWN Arrow buttons until the temperature  
readout matches the calibration reading.  
B. Press the Steamer LOGO button to store the desired tem-  
perature and exit CAL TEMP mode.  
Factory Presets  
5
Loading factory presets restores the unit to factory settings and voids  
all user programmed information.  
A. During power up, press and hold both PRODUCT 1 and PRODUCT 4  
buttons within 3 seconds. The display will flash PRESETS LOADED.  
B. Release both buttons.  
NOTE: Pressing the Product 3 button at any time exits the  
Program mode without storing the change.  
Default Factory Presets:  
ON OFF Cycles  
All  
1
3
2
presets loaded  
CAL 265  
CAL 265  
View Firmware Version  
Manual Reset  
Press and hold the Seamer LOGO button first, then press and  
hold the START button.  
A hi-limit thermostat will turn off electrical power to the platen and  
control circuits if the unit overheats.  
The display will show the current firmware version.  
Turn the unit off and allow to cool (approximately 10-15 minutes).  
A manual reset is located on the back of the unit. Once the unit has  
cooled sufficiently, press the manual reset and restart the unit.  
NOTE: If the unit continues to shut-off due to overheating, contact your  
authorized Prince Castle Service Agency.  
Manual Reset  
. VERS XX.XX  
revA  
3
Printed in USA 0910 © 2003  
Steamer 625-502  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Steamer  
625-A  
Programming Product Name & Water Cycle  
A. Press and hold the LOGO button and a PRODUCT button for  
approximately 6 seconds. The display will show the current  
assigned product for the button pressed.  
The Program button menus can be changed to any of the  
following menu items.  
1
PROD1 thru PROD12 can be selected to program additional  
product names.  
NOTE: A decimal point will appear and flash on the right side of  
the display to indicate Programming mode.  
“– – – –” can be used when no product name selection is desired.  
Filet  
Large  
PROD1  
PROD6  
PROD11  
PROD2  
PROD7  
PROD12  
PROD3  
PROD8  
– – – –  
PROD4  
PROD9  
PROD5  
PROD10  
FILET  
Press and hold the Prince Castle LOGO button first, then press  
and hold the Steamer Logo button for 6 seconds.  
B. Press the UP or DOWN Arrow button to scroll through the  
product selections.  
C. Press the Steamer LOGO button to store the new product  
name.  
2
3
The display will show the product name with the left-most  
character display or decimal point flashing.  
To enter custom product names, proceed to step 3.  
NOTE: Must be in Programming mode.  
NOTE: Pressing the Product 3 button at any time exits the  
Program mode without storing the change.  
PROD 1  
PROD 1  
PROD 1  
A. Press the UP or DOWN Arrow buttons to change the  
left-most character.  
B. Press the Product 1 or Product 4 button to move the cursor  
to the next character.  
The display now shows the product’s water valve ON time in  
seconds.  
5
4
C. Repeat steps A and B for each character.  
D. Press the Steamer LOGO button to store the new  
product name.  
NOTE: Pressing the Product 3 button at any time exits the  
Program mode without storing the change.  
ON  
1.1  
CHKN 1  
CROD 1  
A. Press the UP or DOWN Arrow buttons to change the valve  
ON time.  
B. Press the Steamer LOGO button to store the new valve  
The display now shows the product’s water valve OFF time  
in seconds.  
7
6
ON time.  
NOTE: Pressing the Product 3 button at any time exits the  
Program mode without storing the change.  
OFF  
2.5  
ON 1.1  
ON 1.1  
4
Printed in USA 0910 © 2003  
Steamer 625-502revA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Steamer  
625-A  
A. Press the UP or DOWN Arrow buttons to change the valve  
OFF time.  
B. Press the Steamer LOGO button to store the new valve  
The display now shows the product’s number of on-off water  
valve cycles.  
8
9
OFF time.  
NOTE: Pressing the Product 3 button at any time exits the  
Program mode without storing the change.  
CYCLES 2  
OFF 3.0  
OFF 3.0  
A. Press the UP or DOWN Arrow buttons to change the  
number of water cycles.  
B. Press the Steamer LOGO button to store the new water  
cycle number and exit the Programming mode.  
10  
11  
The display now shows the current product set temperature.  
NOTE: Pressing the Product 3 button at any time exits the  
Program mode without storing the change.  
255  
CYCLES 3  
CYCLES 3  
The display now shows the time delay between when the  
product is finished and when the alarm sounds.  
The delay can be set for 0.0 to 10.0 seconds.  
A. Press the UP or DOWN Arrow buttons to scroll to the  
desired time delay.  
B. Press the Rapid Steamer LOGO button to store the desired  
time and to exit the Programming mode. .  
Platen temperature can be set between 129°-176°C (265°- 350°F).  
13  
12  
A. Press the UP or DOWN Arrow buttons to scroll to the  
desired temperature.  
B. Press the Rapids Steamer LOGO button to store the desired  
temperature.  
NOTE: Pressing the PRODUCT 3 button at any time exits the  
Program mode without storing the change.  
NOTE: Pressing the PRODUCT 3 button at any time exits the  
Program mode without storing the change.  
TEMP 275  
TEMP 275  
AL DLY 2.5  
5
Error Messages  
ERROR MESSAGES  
No Heat Error.  
ACTION  
Call service technician.  
5
Printed in USA 0910 © 2003  
Steamer 625-502revA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Steamer  
625-A  
Cleaning - Daily PM Tasks  
The following equipment is required:  
WARNING  
Turn the unit off and unplug the power cord from the electrical recep-  
tacle. Proceed with caution, unit is still hot!  
Detergent or Cleaner  
Delimer/Lime Scale Remover  
(as required)  
CAUTION  
This unit is not watertight. Do not clean with a water jet/jet spray. Do  
not immerse the unit in water.  
Sanitizer  
Do not use abrasive materials such as scrapers, steel wool, etc. to  
clean the spatula or steam chamber.  
Clean sanitized towel  
Protective (insulated) gloves  
While wearing protective gloves:  
While wearing protective gloves, remove the top cover by  
pulling up and off the unit.  
2
1
A. Remove spatula.  
B. Remove the top  
plate by carefully  
sliding it forward  
and out of the unit.  
Top Cover  
Top Plate  
Spatula  
C. Remove the venturi  
plate.  
Venturi Plate  
A. Wash top cover, top plate, and venturi plate in a solution of  
Wipe the steam chamber surface with a clean sanitized cloth.  
3
4
detergent and water.  
B. Rinse with clean water, and then sanitize in a solution of  
OPTIONAL: If the surface shows  
signs of excessive calcium and  
lime buildup, dissolve two tea-  
spoons of delimer in a  
sanitizer.  
C. Let air dry.  
small coffee cup with 100mI of  
water. Pour half on each side.  
Using a clean sanitized towel,  
wipe the internal surfaces of the  
steam chamber. Allow to sit for  
5 minutes. Using a clean sani-  
tized towel,thoroughly rinse and  
wipe, the internal surfaces of  
the steam chamber.  
Wash all external surfaces of the steamer with a solution of  
detergent and water. Using the solution ina spray bottle,  
spray directly onto a clean sanitized towel and wipe the unit  
clean.  
Reassemble the unit.  
5
6
Turn the unit on. When unit is preheated, run a minimum of  
four cycles to prime the unit and remove any residual cleaner.  
It is recommended that the steamers go through a deliming  
procedure at least once a month. Some hard water areas may  
require increased deliming based upon actual buildup.  
CAUTION  
Do not spray directly on the unit or use abrasive cleaners!  
6
Printed in USA 0910 © 2003  
Steamer 625-502revA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Steamer  
625-A  
Cleaning - Monthly PM Tasks  
The following equipment is required:  
WARNING  
Turn the unit off and unplug the power cord from the electrical recep-  
tacle. Proceed with caution, unit is still hot!  
Detergent or Cleaning Solution  
Delimer/Lime Scale Remover  
(as required)  
CAUTION  
This unit is not watertight. Do not clean with a water jet/jet spray. Do  
not immerse the unit in water.  
Sanitizer  
Do not use abrasive materials such as scrapers, steel wool, etc. to  
clean the spatula or steam chamber.  
Clean sanitized towel  
Protective (insulated) gloves  
While wearing protective gloves, remove the top cover by  
pulling up and off the unit.  
While wearing protective gloves:  
2
1
A. Remove spatula.  
B. Remove the top  
plate by carefully  
sliding it forward  
and out of the unit.  
Top Cover  
Top Plate  
Spatula  
C. Remove the  
venturi plate.  
Venturi Plate  
A. Wash top cover, top plate, spatula, and venturi plate in a  
Pour a solution of Delimer into the steam chamber.  
Let solution soak for at least 15 minutes.  
3
4
solution of detergent and water.  
B. Rinse with clean water, and then sanitize in a solution of  
sanitizer.  
C. Let air dry.  
IMPORTANT. It is not recommended  
to leave open container of delimer around  
A. Clean stem injection ports with a paper clip or small wire.  
B. Rinse with clean water.  
5
C. Wash all external surfaces of the steamer with a solution of  
detergent and water in a spray bottle.  
Spray directly onto a clean sanitized towel and wipe  
the unit clean.  
D. Reassemble the unit.  
CAUTION  
Do not spray directly on the unit or use abrasive cleaners!  
7
Printed in USA 0910 © 2003  
Steamer 625-502revA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Steamer  
625-A  
Exploded View and Parts List  
Ref. Part No.  
Description  
Qty.  
1
2
3
625-129S  
78-233S  
625-193S  
625-205S  
625-145S  
625-130S  
197-232S  
66-045S  
625-071S  
88-497S  
Spatula Assembly  
Switch, Rocker, 20A  
Membrane Switch Assembly  
Display PC Board  
Cover, Top  
Gasket, Silicone  
Legs (Pkg. of - 4)  
Strain Relief  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
5
6
7
8
9
4
Tube, Water  
Mini-Jack, K-Type  
Top Plate  
10 625-064S  
11 625-085S  
12 625-083S  
13 625-077S  
14 65-059S  
15 625-154S  
16 625-065S  
17 625-082S  
18 72-365S  
19  
17  
Manual Reset  
10  
Water Valve Assembly  
Fitting, Water Valve  
Relay, 40A  
Main PC Board  
Venturi Plate  
Probe, 1000 ohm RTD  
Line Cord Assembly  
Plug included in 18  
1
5
16  
6
7
86-255S  
66-061S  
Legs, 1" High (Pkg. of 4)  
Strain Relief  
Line Cord Assembly  
1
1
1
18 72-379S  
3
625 Accessories (not shown)  
625-253S  
Regulator Assembly Kit  
1
19  
7
15  
11  
18  
12  
8
2
13  
6
9
14  
8
Printed in USA 0910 © 2003  
Steamer 625-502revA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Steamer  
625-A  
Notes  
10  
Printed in USA 0910 © 2003  
Steamer 625-502revA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Steamer  
625-A  
Notes  
11  
Printed in USA 0910 © 2003  
Steamer 625-502revA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Steamer  
625-A  
Notes  
12  
Printed in USA 0910 © 2003  
Steamer 625-502revA  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Music Mixer AMR 64 User Manual
Pelco Home Security System C494M E User Manual
Philips Flat Panel Television 17pf9945 User Manual
Philips Network Cables SWA3301S 17 User Manual
Philips Stereo System FW 996 User Manual
Philips TV Converter Box SWS2102W User Manual
Pioneer DVD Recorder PRV LX10 User Manual
Planet Technology Network Card DMA 200 User Manual
Planet Technology Switch GSD 1020 User Manual
PSB Speakers Speaker Platinum Series User Manual