CELEBRITY X
Download from Www.Somanuals.com. All Manuals Search And Download.
C O N T E N T S
I.
INTRODUCTION.........................................................................................................................4
II. SAFETY ..........................................................................................................................................5
III. YOUR SCOOTER ......................................................................................................................19
IV. BATTERIES AND CHARGING............................................................................................24
V. OPERATION ...............................................................................................................................29
VI. COMFORT ADJUSTMENTS ................................................................................................31
VII. DISASSEMBLY AND ASSEMBLY.....................................................................................35
VIII. BASIC TROUBLESHOOTING ............................................................................................37
IX. CARE AND MAINTENANCE................................................................................................39
APPRNDIX I - SPECIFICATIONS................................................................................................43
Celebrity X
3
Download from Www.Somanuals.com. All Manuals Search And Download.
I . I N T R O D U C T I O N
SAFETY
WELCOME to Pride Mobility Products Corporation (Pride). The product you have purchased combines
state-of the-art components with safety, comfort, and styling in mind. We are confident the design features
will provide you with the conveniences you expect during your daily activities. Understanding how to
safely operate and care for this product should bring you years of trouble free operation and service.
Read and follow all instructions, warnings, and notes in this manual and all other accompanying literature
before attempting to operate this product for the first time. In addition, your safety depends upon you, as
well as your provider, caretaker, or healthcare professional in using good judgement.
If there is any information in this manual which you do not understand, or if you require additional assis-
tance for setup or operation, please contact your authorized Pride Provider. Failure to follow the instruc-
tions, warnings, and notes in this manual and those located on your Pride product can result in
personal injury or product damage and will void Pride’s product warranty.
PURCHASER’S AGREEMENT
By accepting delivery of this product, you promise that you will not change, alter, or modify this product
or remove or render inoperable or unsafe any guards, shields, or other safety features of this product; fail,
refuse, or neglect to install any retrofit kits from time to time provided by Pride to enhance or preserve the
safe use of this product.
SHIPPING AND DELIVERY
Before using your scooter, make sure your delivery is complete as some components may be individually
packaged. If you do not receive a complete delivery, please contact your authorized Pride Provider imme-
diately. Where damage has occurred during transport, either to the packaging or content, please contact
the delivery company responsible.
INFORMATION EXCHANGE
We want to hear your questions, comments, and suggestions about this manual. We would also like to hear
about the safety and reliability of your new scooter, and about the service you received from your autho-
rized Pride Provider. Please notify us of any change of address, so we can keep you apprised of important
information about safety, new products, and new options that can increase your ability to use and enjoy
your scooter. Please feel free to contact us at the address below:
USA:
Canada:
Pride Mobility Products Corporation
Attn.: Customer Care Department
182 Susquehanna Avenue
Exeter, PA 18643-2694
1-800-424-8205
Pride Mobility Products Company
380 Vansickle Road Unit 350
St. Catharines, Ontario L2R 6P7
1-888-570-1113
NOTE: If you ever lose or misplace your product registration card or your copy of this manual, contact
us and we will be glad to send you a new one immediately.
Celebrity X
4
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
PRODUCT SAFETY SYMBOLS
The symbols below are used on the scooter to identify warnings, mandatory actions, and prohibited
actions. It is very important for you to read and understand them completely.
Pinch/Crush points created during assembly.
Corrosive chemicals contained in battery.
EMI-RFI — This product has been tested and passed at an immunity level of 20 V/m.
Explosive conditions exist!
Read and follow the information in the owner’s manual.
Keep tools and other metal objects away from battery terminals. Contact with
tools can cause electrical shock.
Celebrity X
5
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
Maximum seating weight.
Unlocked and in freewheel mode.
Place unit on level ground and stand to one side when changing from drive mode
to freewheel mode or freewheel mode to drive mode.
Locked and in drive mode.
Front-to-rear plug orientation.
Wear safety goggles.
Use only AGM or Gel-Cell batteries to reduce the risk of leakage or explosive
conditions.
Celebrity X
6
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
Do not raise or lower the power seat while the scooter is in motion.
Do not remove anti-tip wheels.
Do not use a cell phone, walkie/talkie, laptop, or other radio transmitter while
operating.
Avoid exposure to rain, snow, ice, salt, or standing water whenever possible.
Maintain and store in a clean and dry condition.
Removal of grounding prong can create electrical hazard. If necessary, properly
install an approved 3-pronged adapter to an electrical outlet having 2-pronged
plug access.
Do not connect an extension cord to the AC/DC converter or the battery charger.
Celebrity X
7
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
Do not allow unsupervised children to play near the scooter while the batteries
are charging.
Do not use batteries with different amp-hour (Ah) capacities. Do not mix old and
new batteries. Always replace both batteries at the same time.
Keep your hands away from the tires when driving. Be aware that loose fitting
clothing can become caught in drive tires.
Battery charger for indoor use only.
Disposal and recycling — Contact your authorized Pride Provider for information
on proper disposal and recycling of your Pride product and its packaging.
Contains Lead.
Celebrity X
8
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
GENERAL
MANDATORY! Do not operate your new scooter for the first time without completely
reading and understanding this owner’s manual.
Your scooter is a state-of-the-art life-enhancement device designed to increase mobility. Pride provides an
extensive variety of products to best fit the individual needs of the scooter user. Please be aware that the
final selection and purchasing decision regarding the type of scooter to be used is the responsibility of the
scooter user who is capable of making such a decision and his/her healthcare professional (i.e., medical
doctor, physical therapist, etc.).
The contents of this manual are based on the expectation that a mobility device expert has properly fitted
the scooter to the user and has assisted the prescribing healthcare professional and/or the authorized Pride
Provider in the instruction process for the use of the product.
There are certain situations, including some medical conditions, where the scooter user will need to prac-
tice operating the scooter in the presence of a trained attendant. A trained attendant can be defined as a
family member or care professional specially trained in assisting a scooter user in various daily living
activities.
As you begin using your scooter during daily activities, you will probably encounter situations in which
you will need some practice. Simply take your time and you will soon be in full and confident control as
you maneuver through doorways, on and off elevators, up and down ramps, and over moderate terrain.
Below are some precautions, tips, and other safety considerations that will help you become accustomed
to operating the scooter safely.
MODIFICATIONS
Pride has designed and engineered your scooter to provide maximum mobility and utility. However, under
no circumstances should you modify, add, remove, or disable any feature, part, or function of your scooter.
WARNING! Do not modify your scooter in any way not authorized by Pride. Do not use
accessories if they have not been tested or approved for Pride products.
REMOVABLE PARTS
WARNING! Do not attempt to lift or move your scooter by any of its removable parts,
including the armrests, seat, or shroud.
PRE-RIDE SAFETY CHECK
Get to know the feel of your scooter and its capabilities. Pride recommends that you perform a safety check
before each use to make sure your scooter operates smoothly and safely.
Celebrity X
9
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
Perform the following inspections prior to using your scooter:
ꢀ Check for proper tire inflation. Maintain but do not exceed the psi/bar/kPa air pressure rating indicated
on each tire if equipped with pneumatic tires.
ꢀ Check all electrical connections. Make sure they are tight and not corroded.
ꢀ Check all harness connections. Make sure they are secured properly.
ꢀ Check the brakes.
ꢀ Check battery charge.
If you discover a problem, contact your authorized Pride Provider for assistance.
TIRE INFLATION
If your scooter is equipped with pneumatic tires, you should check or have the air pressure checked at least
once a week. Proper inflation pressures will prolong the life of your tires and help ensure the smooth
operation of your scooter.
WARNING! It is critically important that the psi/bar/kPa air pressure rating indicated on
each tire be maintained in pneumatic tires at all times. Do not underinflate or overinflate
your tires. Low pressure may result in loss of control, and overinflated tires may burst.
Failure to maintain the psi/bar/kPa air pressure rating indicated on pneumatic tires at all
times may result in tire and/or wheel failure.
WARNING! Inflate your scooter tires from a regulated air source with an available
pressure gauge. Inflating your tires from an unregulated air source could overinflate
them, resulting in a burst tire.
NOTE: If the tires on your scooter list the psi rating only, use the following conversion formulas to find
the bar or kPa rating: bar = psi x 0.06895, kPa = psi x 6.89476
WEIGHT LIMITATIONS
Your scooter is rated for a maximum weight capacity. Refer to the specifications table for information.
Keep in mind that the maximum weight capacity includes the combined weight of the user and any acces-
sories mounted to the scooter.
MANDATORY! Stay within the specified weight capacity for your scooter. Exceeding the
weight capacity voids your warranty. Pride will not be held responsible for injuries and/
or property damage resulting from failure to observe weight limitations.
WARNING! Do not carry passengers on your scooter. Carrying passengers on your
scooter may affect the center of gravity, resulting in a tip or a fall.
INCLINE INFORMATION
More and more buildings have ramps with specified degrees of inclination, designed for easy and safe
access. Some ramps may have turning switchbacks (180-degree turns) that require you to have good cor-
nering skills on your scooter.
ꢀ Proceed with extreme caution as you approach the downgrade of a ramp or other incline.
ꢀ Take wide swings with your scooter around any tight corners. If you do that, the scooter’s rear wheels
will follow a wide arc, not cut the corner short, and not bump into or get hung up on any railing corners.
ꢀ When driving down a ramp, keep the scooter’s speed adjustment set to the slowest speed setting to
ensure a safely controlled descent.
ꢀ Avoid sudden stops and starts.
Celebrity X
10
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
When climbing an incline, try to keep your scooter moving. If you must stop, start up again slowly and
then accelerate cautiously. When driving down an incline, do so by setting the speed adjustment dial to the
slowest setting and driving in the forward direction only. If your scooter starts to move down the incline
faster than you anticipated or desired, allow it to come to a complete stop by releasing the throttle control
lever. Then push the throttle control lever forward slightly to ensure a safely controlled descent.
WARNING! When on any sort of an incline or decline, never place the scooter in
freewheel mode especially while seated on it or standing next to it.
WARNING! When climbing an incline, do not zigzag or drive at an angle up the
face of the incline. Drive your scooter straight up the incline. This greatly
reduces the possibility of a tip or a fall. Always exercise extreme caution when
negotiating an incline.
WARNING! Do not drive your scooter across the side of an incline or diagonally
up or down an incline; do not stop, if possible, while driving up or down an incline.
WARNING! You should not travel up or down a potentially hazardous incline (i.e.,
areas covered with snow, ice, cut grass, or wet leaves).
WARNING! Even though your scooter is capable of climbing slopes greater than
those illustrated in figure 1, do not, under any circumstances, exceed the incline
guidelines or any other specifications presented in this manual. Doing so could
cause instability in your scooter.
Handicap public access ramps are not subject to government regulation in all countries, and therefore do
not necessarily share the same standard percent of slope. Other inclines may be natural or, if man-made,
not designed specifically for scooters.
Tests were conducted with the scooter’s seat in the highest position and adjusted rearward on the seat base
to its farthest rearward position. Use the specification information as a guideline. Your scooter’s ability to
travel up inclines is affected by your weight, your scooter’s speed, your angle of approach to the incline,
and your scooter setup.
WARNING! Any attempt to climb or descend a slope steeper than what is listed in the
product specifications may put your scooter in an unstable position and cause it to tip.
WARNING! Never carry an oxygen tank weighing more than 13 lbs. (6 kg). Never fill the
front or rear basket with contents exceeding 13 lbs. (6 kg).
Celebrity X
11
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
When you approach an incline, it is best to lean forward. See figures 1 and 2. This shifts the center of
gravity of you and your scooter toward the front of the scooter for improved stability.
NOTE: When negotiating ramps, if the throttle control lever is released while moving forward, the
powered scooter may "rollback" approximately 1 foot (30.5 cm) before the brake engages. If the throt-
tle control lever is released while moving in reverse, the powered scooter may "rollback" approximately
3 feet (1 meter) before the brake engages.
Figure 1. Normal Driving Position
Figure 2. Increased Stability Driving Position
CORNERING INFORMATION
Excessively high cornering speeds can create the possibility of tipping. Factors which affect the possibility
of tipping include, but are not limited to, cornering speed, steering angle (how sharply you are turning),
uneven road surfaces, inclined road surfaces, riding from an area of low traction to an area of high traction
(such as passing from a grassy area to a paved area – especially at high speed while turning), and abrupt
directional changes. High cornering speeds are not recommended. If you feel that you may tip over in a
corner, reduce your speed and steering angle (i.e., lessen the sharpness of the turn) to prevent your scooter
from tipping.
WARNING! When cornering sharply, reduce your speed and maintain a stable center of
gravity. When using your scooter at higher speeds, do not corner sharply. This greatly
reduces the possibility of a tip or fall.
BRAKING INFORMATION
Your scooter is equipped with these powerful brake systems:
ꢀ Regenerative: Uses electricity to rapidly slow the vehicle when the throttle control lever returns to the
center/stop position.
ꢀ Disc Park Brake: Activates mechanically after regenerative braking slows the vehicle to near stop or
when power is removed from the system for any reason.
Celebrity X
12
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
OUTDOOR DRIVING SURFACES
Your scooter is designed to provide optimum stability under normal driving conditions—dry, level sur-
faces composed of concrete or asphalt. However, Pride recognizes that there will be times when you will
encounter other surface types. For this reason, your scooter is designed to perform admirably on packed
soil, grass, and gravel. Feel free to use your scooter safely on lawns and in park areas.
ꢀ Avoid driving on uneven terrain and/or soft surfaces.
ꢀ Avoid tall grass that can become tangled in the running gear.
ꢀ Avoid loosely packed gravel and sand.
ꢀ Do not use your scooter in fresh or salt water.
ꢀ Do not use your scooter at the edge of a stream, lake, or ocean.
ꢀ If you feel unsure about a driving surface, avoid that surface.
PUBLIC STREETS AND ROADWAYS
WARNING! You should not operate your scooter on public streets and roadways. Be
aware that it may be difficult for traffic to see you when you are seated on your scooter.
Obey all local pedestrian traffic rules. Wait until your path is clear of traffic, and then
proceed with extreme caution.
STATIONARY OBSTACLES (STEPS, CURBS, ETC.)
WARNING! Do not drive near raised surfaces, unprotected ledges, and/or drop-offs
(curbs, porches, stairs, etc.).
WARNING! Do not attempt to have your scooter climb or descend an obstacle that is
inordinately high.
WARNING! Do not attempt to have your scooter proceed backward down any step, curb,
or other obstacle. This may cause the scooter to tip.
WARNING! Be sure your scooter is traveling perpendicular to any curb you may be
required to ascend or descend. See figures 3 and 4.
WARNING! Even though your scooter may be capable of handling greater obstacles,
Pride recommends that you do not attempt to negotiate a curb that has a height greater
than 2 in. (5 cm). Doing so could cause instability in your scooter.
Figure 3. Correct Curb Approach
Figure 4. Incorrect Curb Approach
Celebrity X
13
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
INCLEMENT WEATHER PRECAUTIONS
Exposure of your scooter to inclement weather conditions should be avoided whenever possible. If sud-
denly caught up in rain, snow, severe cold or heat while operating your scooter, proceed to shelter at the
earliest opportunity. Thoroughly dry your scooter before storing, charging, or operating your scooter.
PROHIBITED! Operating in rain, snow, salt, mist/spray conditions, and on icy/slippery
surfaces can cause damage to the scooter and electrical system. Maintain and store
your scooter in a dry and clean condition.
WARNING! Prolonged exposure to hot or cold conditions may affect the temperature of
upholstered and non-upholstered items on the scooter, possibly resulting in skin
irritation. Exercise caution when using your scooter in extremely hot or cold conditions
or when exposing your scooter to direct sunlight for prolonged periods of time.
FREEWHEEL MODE
Your scooter is equipped with a manual freewheel lever that, when engaged, allows the scooter to be
pushed. For more information about how to place your scooter into and out of freewheel mode, see III.
“Your Scooter.”
WARNING! When your scooter is in freewheel mode, the braking system is disengaged.
ꢀ
ꢀ
ꢀ
Disengage the drive motors only on a level surface.
Ensure the key is removed from the key switch.
Stand to the side of the scooter to engage or disengage freewheel mode. Never sit
on a scooter to do this.
After you have finished pushing your scooter, always return it to the drive mode to
lock the brakes.
ꢀ
An added feature built into the scooter is “push-too-fast” protection which safeguards the scooter against
gaining excessive speed while in freewheel mode.
“Push-too-fast” operates differently depending on which of two conditions exists:
ꢀ If the key is switched “off” while in freewheel mode, the scooter’s controller activates regenerative
braking when the scooter is pushed faster than a maximum threshold which has been preprogrammed.
In this case, the controller is acting as a speed governor.
ꢀ If the key is switched “on” while in freewheel mode, you will encounter considerable resistance at any
speed. This prevents the scooter from gaining unwanted momentum should the manual freewheel lever
inadvertently be released while driving the scooter.
STAIRS AND ESCALATORS
Scooters are not designed to travel up or down stairs or escalators. Always use an elevator.
WARNING! Do not use your scooter to negotiate steps or escalators.
DOORS
ꢀ Determine if the door opens toward or away from you.
ꢀ Use your hand to turn the knob or push the handle or push-bar.
ꢀ Drive your scooter gently and slowly forward to push the door open. Or drive your scooter gently and
slowly rearwards to pull the door open.
Celebrity X
14
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
ELEVATORS
Modern elevators have a door edge safety mechanism that, when pushed, reopens the door(s).
ꢀ If you are in the doorway of an elevator when the door(s) begin to close, push on the rubber door edge
or allow the rubber door edge to contact the scooter and the door will reopen.
ꢀ Use care that pocketbooks, packages, or scooter accessories do not become caught in elevator doors.
NOTE: If your scooter’s turning radius is greater than 60 in. (1500 mm), it may be difficult to maneuver
in elevators and building entrances. Use caution when attempting to turn or maneuver your scooter in
small spaces and avoid areas that might pose a problem.
LIFT SYSTEMS/ELEVATION PRODUCTS
If you will be transporting your scooter during travel, you may find it necessary to use a vehicle-mounted
lift system or elevation product to aid in transportation. Pride recommends that you closely review the
warnings, instructions, specifications, and safety information set forth by the manufacturer of the lift/
elevation product before using that product.
WARNING! Not all lift systems/elevation products are rated for use with an occupied
mobility device. Pride recommends that you do not remain seated in your scooter when
it is being used in connection with any type of lift system/elevation product unless:
ꢀ
ꢀ
That product is rated for occupied use by the manufacturer.
You are able to occupy your mobility device in strict conformity with the warnings,
instructions, specifications, and safety guidelines set forth by the manufacturer.
WARNING! Always turn off the power to the unit when you are being transferred via an
elevation product. Failure to do so may result in accidental throttle control lever contact,
resulting in unintended movement and personal injury or product damage.
BATTERIES
In addition to following the warnings below, be sure to comply with all other battery handling information.
MANDATORY! Battery posts, terminals, and related accessories contain lead
and lead compounds. Wear goggles and gloves when handling batteries and
wash hands after handling.
WARNING! Scooter batteries are heavy. See specifications table. If you are
unable to lift that much weight, be sure to get help. Use proper lifting techniques
and avoid lifting beyond your capacity.
WARNING! Always protect the batteries from freezing and never charge a frozen
battery. Charging a frozen battery may result in damage to the battery.
WARNING! Connect the battery harnesses in the proper manner. RED (+) cables
must be connected to positive (+) battery terminals/posts. BLACK (-) cables must
be connected to negative (-) battery terminals/posts. Protective caps should be
installed over all battery terminals. REPLACE cables immediately if damaged.
BATTERY DISPOSAL AND RECYCLING
If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag and contact your
local waste disposal agency or authorized Pride Provider for instructions on disposal and battery recycling,
which is our recommended course of action.
PREVENTING UNINTENDED MOVEMENT
WARNING! If you anticipate being seated in a stationary position for an extended period
of time, turn off the power. This will prevent unexpected motion from inadvertent throttle
control lever contact.
Celebrity X
15
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
MOTOR VEHICLE TRANSPORT
Pride recommends that you do not remain seated in your scooter while traveling in a motor vehicle. The
scooter should be stowed in the trunk of a car or in the back of a truck or van with batteries removed and
properly secured. In addition, all removable scooter parts, including the armrests, seat, and shroud should
be removed and/or properly secured during motor vehicle transport.
WARNING! Although your scooter may be equipped with a positioning belt, this belt is not
designed to provide proper restraint during motor vehicle transport. Anyone traveling in
a motor vehicle should be properly secured in the motor vehicle seat with safety belts
fastened securely.
WARNING! Do not sit on your scooter while it is in a moving vehicle.
WARNING! Always be sure your scooter and its batteries are properly secured when it is
being transported. Batteries should be secured in an upright position and protective caps
should be installed on the battery terminals. Batteries should not be transported with any
flammable or combustible items.
GETTING ONTO AND OFF OF YOUR SCOOTER
Getting onto and off of your scooter requires a good sense of balance. Please observe the following safety
tips when getting onto and off of your scooter:
ꢀ Remove the key from the key switch.
ꢀ Ensure that your scooter is not in freewheel mode. See III. “Your Scooter.”
ꢀ Make certain that the seat is fixed into place.
ꢀ Pivot the armrests up to make getting onto and off of the scooter easier.
WARNING! Position yourself as far back as possible in the scooter seat to prevent the
scooter from tipping.
WARNING! Avoid putting all of your weight on the scooter armrests and do not use the
armrests for weight bearing purposes, such as transfers. Such use may cause the
scooter to tip, resulting in a fall from the scooter.
WARNING! Avoid putting all of your weight on the floorboard. Such use may cause the
scooter to tip.
REACHING AND BENDING
Avoid reaching or bending while driving your scooter. Bending forward creates the risk of accidental
throttle control lever contact. Bending to the side while seated creates the risk of tipping. It is important to
maintain a stable center of gravity and keep the scooter from tipping. Pride recommends that the scooter
user determine his/her personal limitations and practice bending and reaching in the presence of a qualified
attendant.
WARNING! Do not bend, lean, or reach for objects if you have to pick them up from the
scooter deck or from either side of the scooter. Movements such as these may change
your center of gravity and the weight distribution of the scooter and cause your scooter
to tip.
PROHIBITED! Keep your hands away from the tires when driving. Be aware that loose
fitting clothing can become caught in drive tires.
Celebrity X
16
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
POSITIONING BELTS
Your authorized Pride Provider, therapist(s), and other healthcare professionals are responsible for deter-
mining your requirement for a positioning belt in order to operate your scooter safely.
WARNING! If you require a positioning belt to safely operate your scooter, make sure it
is fastened securely in order to reduce the possibility of a fall from the scooter.
PRESCRIPTION DRUGS/PHYSICAL LIMITATIONS
The scooter user must exercise care and common sense when operating his/her scooter. This includes
awareness of safety issues when taking prescribed or over-the-counter drugs or when the user has specific
physical limitations.
WARNING! Consult your physician if you are taking prescribed or over-the-counter
medication or if you have certain physical limitations. Some medications and limitations
may impair your ability to operate your scooter in a safe manner.
ALCOHOL/SMOKING
The scooter user must exercise care and common sense when operating his/her scooter. This includes
awareness of safety issues while under the influence of alcohol or while smoking.
WARNING! Do not operate your scooter while you are under the influence of alcohol, as
this may impair your ability to drive safely.
WARNING! Pride strongly recommends that you do not smoke cigarettes while seated in
your scooter, although the scooter has passed the necessary testing requirements for
cigarette smoking. You must adhere to the following safety guidelines if you decide to
smoke cigarettes while seated in your scooter.
ꢀ Do not leave lit cigarettes unattended.
ꢀ Keep ashtrays a safe distance from the seat cushions.
ꢀ Always make sure cigarettes are completely extinguished before disposal.
Celebrity X
17
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
ELECTROMAGNETIC AND RADIO FREQUENCY INTERFERENCE (EMI/RFI)
WARNING! Laboratory tests have shown that electromagnetic and radio frequency
waves can have an adverse affect on the performance of electrically-powered mobility
vehicles.
Electromagnetic and Radio Frequency Interference can come from sources such as cellular phones, mobile
two-way radios (such as walkie-talkies), radio stations, TV stations, amateur radio (HAM) transmitters,
wireless computer links, microwave signals, paging transmitters, and medium-range mobile transceivers
used by emergency vehicles. In some cases, these waves can cause unintended movement or damage to
the control system. Every electrically-powered mobility vehicle has an immunity (or resistance) to EMI.
The higher the immunity level, the greater the protection against EMI. This product has been tested and
has passed at an immunity level of 20 V/M.
WARNING! Be aware that cell phones, two-way radios, laptops, and other types of radio
transmitters may cause unintended movement of your electrically-powered mobility
vehicle due to EMI. Exercise caution when using any of these items while operating your
mobility vehicle and avoid coming into close proximity of radio and TV stations.
WARNING! The addition of accessories or components to the electrically-powered
mobility vehicle can increase the susceptibility of the vehicle to EMI. Do not modify your
scooter in any way not authorized by Pride.
WARNING! The electrically-powered mobility vehicle itself can disturb the performance
of other electrical devices located nearby, such as alarm systems.
unintended motion or brake release occurs, turn the scooter off as soon as it is safe to do so. Call Pride
at 1-800-424-8205 to report the incident.
Celebrity X
18
Download from Www.Somanuals.com. All Manuals Search And Download.
I I I . Y O U R S C O O T E R
TILLER CONSOLE
The tiller console houses all of the controls needed to drive your scooter, including the speed adjustment dial,
throttle control lever, battery condition meter, lights switch, status LED, and horn buttons. See figure 5.
PROHIBITED! Do not expose the tiller console to moisture. In the event that the tiller
console does become exposed to moisture, do not attempt to operate your scooter until
the tiller console has dried thoroughly.
STATUS LED
KEY SWITCH
BATTERY CONDITION METER
SPEED ADJUSTMENT DIAL
THROTTLE
CONTROL
LEVER
THROTTLE
CONTROL
LEVER
HORN BUTTON
LIGHTS SWITCH
HORN BUTTON
Figure 5. Tiller Console
Horn Buttons
These buttons activate a warning horn. Your scooter must be powered up for the horn to be operational.
Do not hesitate to use the warning horn when doing so may prevent accident or injury.
Key Switch
ꢀ Insert the key into the key switch and turn it clockwise to power up (turn on) your scooter.
ꢀ Turn the key counterclockwise to power down (turn off) your scooter.
WARNING! If the key is moved to the “off” position while your scooter is in motion, the
electronic brakes will engage and your scooter will come to an abrupt stop!
Battery Condition Meter
When the key is fully inserted and turned clockwise to power up your scooter, this meter indicates the
approximate battery voltage strength. For further information on battery charging, see IV. “Batteries and
Charging.”
Celebrity X
19
Download from Www.Somanuals.com. All Manuals Search And Download.
I I I . Y O U R S C O O T E R
Lights Switch
This switch controls your scooter’s lights.
ꢀ Toggle the switch forward to turn on your scooter’s front top light and running lights.
ꢀ Toggle the switch to the middle to turn off the scooter’s lights.
ꢀ Toggle the switch rearward to turn on all the scooters lights (upper, lower front, and running lights).
WARNING! Scooter users are required to use their lights when visibility is restricted—day
or night.
Throttle Control Lever
This lever allows you to control the forward speed and the reverse speed of your scooter up to the maxi-
mum speed you preset with the speed adjustment dial.
To Move Forward use either of the following:
ꢀ Use your left thumb to push the left side of the throttle control lever.
ꢀ Use your right hand fingers to pull back on the right side of the throttle control lever.
To Move Rearward use either of the following:
ꢀ Use your right thumb to push the right side of the throttle control lever.
ꢀ Use your left hand fingers to pull back on the left side of the throttle control lever.
Release the throttle control lever and allow your scooter to come to a complete stop before engaging the
other side of the lever. When the throttle control lever is completely released, it automatically returns to
the center “stop” position and engages your scooter’s brakes.
Speed Adjustment Dial
This dial allows you to preselect and limit your scooter’s top speed.
ꢀ The image of the tortoise represents the slowest speed setting.
ꢀ The image of the hare represents the fastest speed setting.
Off-board Charger Port
The off-board charger power cord plugs into this port when
charging the batteries. See figure 6.
Tiller Console Fuses
These fuses help protect your scooter’s front lighting, turn sig-
nals, and key switch console systems from receiving an over-
load of electrical current. The fuses used in your scooter are
the same type used in automobiles. See figure 7. See IX.
“Care and Maintenance” for fuse replacement.
Figure 6. Off-board Charger Port
Celebrity X
20
Download from Www.Somanuals.com. All Manuals Search And Download.
I I I . Y O U R S C O O T E R
REAR SECTION
The batteries, main circuit breaker (reset button), man-
ual freewheel lever, anti-tip wheels, and motor/
transaxle assembly are located on the rear section of
your scooter. See figure 8.
SPARE
Anti-Tip Wheels
RUNNING LIGHTS
LOWER HEAD LIGHT
LEFT TURN SIGNAL
RIGHT TURN SIGNAL
The anti-tip wheels are an integral and important safety
feature of your scooter. They are bolted to the frame at
the rear of the scooter.
PROHIBITED! Do not remove the anti-
tip wheels or modify your scooter in
any way that is not authorized by
Pride.
Figure 7. Tiller Console Fuses
Batteries
The batteries store the electrical energy that powers your scooter. See IV. “Batteries and Charging ” for
information on how to charge your scooter batteries.
Motor/Transaxle Assembly
The motor/transaxle assembly is an electromechanical unit that converts electrical energy from your
scooter’s batteries into the controlled mechanical energy that drives the scooter’s wheels.
BATTERY
BATTERY
MANUAL FREEWHEEL LEVER
MOTOR/TRANSAXLE ASSEMBLY
ANTI-TIP WHEELS
Figure 8. Rear Section
Celebrity X
21
Download from Www.Somanuals.com. All Manuals Search And Download.
I I I . Y O U R S C O O T E R
Safety Flag Bracket
An accessory bracket for installing an optional
safety flag is mounted near each anti-tip wheel. To
install the flag, the supplied “L”-shaped hex key is
needed. See figure 8A.
HEX KEY
CAP
SETSCREW
To install the safelty flag:
1. Remove the cap from the top of the bracket.
2. Loosen the setscrew with the supplied “L”-
shaped hex key.
3. Insert the flag pole into the opening.
4. Tighten the setscrew to complete installation.
Main Circuit Breaker (Reset Button)
When the voltage in the batteries becomes low or
your scooter is heavily strained because of exces-
sive loads, the main circuit breaker may trip to pro-
tect the motor and electronics from damage. When
the breaker trips, the entire electrical system shuts
down. See figure 9.
Figure 8A. Safety Flag Bracket
MAIN CIRCUIT BREAKER (RESET BUTTON)
ꢀ The reset button pops out when the breaker
trips.
ꢀ Allow a minute or so for the electronics to
“rest.”
ꢀ Push in the reset button to reset the breaker.
ꢀ If the breaker trips frequently, you may need to
charge the batteries more often or have your
authorized Pride Provider perform a load test
on the batteries.
Manual Freewheel Lever
Whenever you need or want to push your scooter
for short distances, you can put it in freewheel
mode.
1. Remove the key from the key switch.
2. Push forward on the manual freewheel lever to
disable the drive system and the brake system.
You may now push your scooter.
Figure 9. Main Circuit Breaker (Reset Button)
3. Pull back on the manual freewheel lever to
reengage the drive and the brake systems and
take your scooter out of freewheel mode.
WARNING! When your scooter is in freewheel mode, the braking system is disengaged.
ꢀ
ꢀ
ꢀ
Disengage the drive motors only on a level surface.
Ensure the key is removed from the key switch.
Stand to the side of the scooter to engage or disengage freewheel mode. Never sit on
a scooter to do this.
ꢀ
After you have finished pushing your scooter, always return it to the drive mode to
lock the brakes.
Celebrity X
22
Download from Www.Somanuals.com. All Manuals Search And Download.
I I I . Y O U R S C O O T E R
NOTE: If the scooter is placed in freewheel mode (manual freewheel lever forward) while the key is in
the “on” position, the scooter will not run until the manual freewheel lever is pushed rearward and the
key is turned to the “off” position, then back to the “on” position.
SECUREMENT POINTS
Steel loops welded to the anti-tip wheel brackets and/or front frame components of your scooter provide
securement points. See figures 10 and 10A. These should only be used with an unoccupied scooter and
secured by an approved securement system in accordance with the manufacturer’s instructions. Pride
makes no representation of suitability for use with specific securement systems nor can we anticipate the
various situations that might arise in use of public transportation systems. For detailed instructions on the
use of securement systems, refer to the applicable municipal transit authority and/or manufacturer of the
system used.
WARNING! DO NOT leave the scooter in freewheel mode when securing it for transport.
WARNING! DO NOT use your scooter as a seat in a moving vehicle.
SECUREMENT POINTS
SECUREMENT POINTS
Figure 10. Rear Securement Points
Figure 10A. Front Securement Points
Celebrity X
23
Download from Www.Somanuals.com. All Manuals Search And Download.
I V . B A T T E R I E S A N D C H A R G I N G
BATTERIES AND CHARGING
Your scooter requires two long-lasting, 12-volt, deep-cycle batteries
that are sealed and maintenance free. They are recharged by an off-
board charging system.
ꢀ Charge your scooter’s batteries fully prior to using it for the first
time.
ꢀ Keep the batteries fully charged to keep your scooter running
smoothly.
READING YOUR BATTERY VOLTAGE
The battery condition meter on the tiller console indicates the approximate
strength of your batteries using a color code. From right to left, green indi-
Figure 11. Battery Condition Meter
cates fully charged batteries, yellow indicates a draining charge, and red
indicates that an immediate recharge is necessary. See figure 11. To
ensure the highest accuracy, the battery condition meter should be
checked while operating your scooter at full speed on a dry, level surface.
CHARGING YOUR BATTERIES
PROHIBITED! Never use an extension cord to plug in your battery charger. Plug the
charger directly into a properly wired standard electrical outlet.
PROHIBITED! Removal of the grounding prong can create an electrical hazard. If
necessary, properly install an approved 3-pronged adapter to an electrical outlet having
2-pronged plug access.
PROHIBITED! Do not allow unsupervised children to play near the scooter while the
batteries are charging. Pride recommends that you do not charge the batteries while the
scooter is occupied.
MANDATORY! Read the battery charging instructions in this manual and in the manual
supplied with the battery charger before charging the batteries.
WARNING! Explosive gases may be generated while charging the batteries. Keep the
scooter and the battery charger away from sources of ignition such as flames or sparks
and provide adequate ventilation when charging the batteries.
WARNING! Ensure that both ends of the charger power cord are clean and dry before
plugging the charger power cord into the off-board charger port or the electrical outlet.
WARNING! Inspect the battery charger, wiring, and connectors for damage before each
use. Contact your authorized Pride Provider if damage is found.
WARNING! Do not attempt to open the battery charger case. If the battery charger does
not appear to be working correctly, contact your authorized Pride Provider.
WARNING! If the off-board battery charger is equipped with cooling slots, then do not
attempt to insert objects through these slots.
WARNING! If your off-board battery charger has not been tested and approved for outdoor
use, then do not expose it to adverse or extreme weather conditions. If the battery
charger is exposed to adverse or extreme weather conditions, then it must be allowed to
adjust to the difference in environmental conditions before use indoors. Refer to the
manual supplied with the battery charger for more information.
Celebrity X
24
Download from Www.Somanuals.com. All Manuals Search And Download.
I V . B A T T E R I E S A N D C H A R G I N G
Follow these easy steps to charge your batteries
safely:
PLUGS INTO THE OFF-BOARD CHARGER PORT
1. Position your scooter close to a standard electri-
cal outlet.
2. Remove the key from the key switch.
3. Make certain that the manual freewheel lever is
in the drive (down) position.
PLUGS INTO ELECTRICAL OUTLET
4. Plug the 3-pin charger power cord into the off-
board charger port. See figures 6 and 12.
5. Extend the charger power cord and plug it into
the electrical outlet. We recommend that you
charge the batteries for 8 to 14 hours.
6. When the batteries are fully charged, unplug the
charger power cord from the electrical outlet
and then from the off-board charger port.
Figure 12. Off-board Charger
NOTE: The LED lights on the charger indicate different charger conditions at various times: charger
power on, charging in progress, and charging complete. Refer to the manual supplied with the charger
for a complete explanation of these indicators.
NOTE: There is a charger inhibit function on your scooter. The scooter will not run and the battery
condition meter will not operate while the batteries are charging.
FREQUENTLY ASKED QUESTIONS
How does the charger work?
When your scooter’s battery voltage is low, the charger works harder, sending more electrical current to
the batteries to bring up their charge. As the batteries approach a full charge, the charger sends less and
less electrical current. When the batteries are fully charged, the current sent from the charger is at nearly
zero amperage. Therefore, when the charger is plugged in, it maintains the charge on your scooter’s bat-
teries, but does not overcharge them. Refer to the manual supplied with the battery charger for charging
instructions.
Can I use a different charger?
Chargers are selected precisely for particular applications and are especially matched to the type, size, and
chemical formulation of specific batteries. For the safest and most efficient charging of your scooter’s
batteries, we recommend use of the charger supplied as original equipment with your Pride product only.
Any charging method resulting in batteries being charged individually is especially prohibited.
What if my scooter’s batteries won’t charge?
ꢀ Ensure the red (+) and black (-) battery cables are connected properly to the battery terminals.
ꢀ Ensure both battery harnesses that extend from the batteries are plugged into their mating harness
leading to the charger.
ꢀ Ensure both ends of the charger power cord are inserted fully.
Celebrity X
25
Download from Www.Somanuals.com. All Manuals Search And Download.
I V . B A T T E R I E S A N D C H A R G I N G
How often must I charge the batteries?
Two major factors must be considered when deciding how often to charge your scooter’s batteries:
ꢀ All day scooter use on a daily basis.
ꢀ Infrequent or sporadic scooter use.
With these considerations in mind, you can determine how often and for how long you should charge your
scooter’s batteries. We designed the off-board charger so that it will not overcharge your scooter’s batter-
ies. However, you may encounter some problems if you do not charge your batteries often enough and if
you do not charge them on a regular basis. Following the guidelines below will provide safe and reliable
battery operation and charging.
ꢀ If you use your scooter daily, charge its batteries as soon as you finish using it for the day. Your scooter
will be ready each morning. We recommend that you charge your scooter’s batteries for 8 to 14 hours
after daily use.
ꢀ If you use your scooter once a week or less, charge its batteries at least once a week for 12 to 14 hours
at a time.
ꢀ Keep your scooter’s batteries fully charged.
ꢀ Avoid deeply discharging your scooter’s batteries.
How can I ensure maximum battery life?
Fully charged deep-cycle batteries provide reliable performance and extended battery life. Keep your
scooter’s batteries fully charged whenever possible. Protect your scooter and batteries from extreme heat
or cold. Batteries that are regularly and deeply discharged, infrequently charged, stored in extreme tem-
peratures, or stored without a full charge may be permanently damaged, causing unreliable performance
and limited service life.
How can I get maximum range or distance per charge?
Rarely will you have ideal driving conditions—smooth, flat, hard driving surfaces with no wind or curves.
Often, you will face hills, pavement cracks, uneven and loosely packed surfaces, curves, and wind, all of
which affect the distance or running time per battery charge. Below are a few suggestions for obtaining
the maximum range per battery charge.
ꢀ Always fully charge your scooter’s batteries prior to daily use.
ꢀ Maintain but do not exceed the psi/bar/kPa air pressure rating indicated on pneumatic tires.
ꢀ Plan your route ahead to avoid as many hills, cracked, broken or soft surfaces as possible.
ꢀ Limit your baggage weight to essential items.
ꢀ Try to maintain an even speed while your scooter is in motion.
ꢀ Avoid stop-and-go driving.
What type and size of battery should I use?
We recommend deep-cycle batteries that are sealed and maintenance free. Both AGM and Gel-Cell are
deep-cycle batteries that are similar in performance. Do not use wet-cell batteries, which have removable
caps.
WARNING! Corrosive chemicals are contained in batteries. Use only AGM or Gel-
Cell batteries to reduce the risk of leakage or explosive conditions.
NOTE: Sealed batteries are not serviceable. Do not remove the caps.
Celebrity X
26
Download from Www.Somanuals.com. All Manuals Search And Download.
I V . B A T T E R I E S A N D C H A R G I N G
How do I change a battery in my scooter?
MANDATORY! Battery posts, terminals, and related accessories contain lead
and lead compounds. Wear goggles and gloves when handling batteries and
wash hands after handling.
WARNING! Always use two batteries of the exact same type, chemistry, and
amp-hour (Ah) capacity. Refer to the specifications table in this manual and in
the manual supplied with the battery charger for recommended type and
capacities.
WARNING! Contact your authorized Pride Provider if you have any questions
regarding the batteries in your scooter.
WARNING! Do not replace the batteries while the scooter is occupied.
WARNING! Do not mix old and new batteries. Always replace both batteries at
the same time.
WARNING! The batteries on your scooter should only be serviced or replaced by
an authorized Pride Provider or a qualified technician.
1. Remove the seat and rear shroud. See VII. “Disassembly and Assembly.”
2. Disconnect the battery tie-down strap.
3. Disconnect the battery harnesses by pulling them straight up. See figure 13.
4. Disconnect the battery cables from the battery terminals.
5. Remove the old batteries.
6. Place a new battery in each battery well. Face the battery terminals toward the front of the scooter.
7. Connect the red battery cable to the positive (+) battery terminal. See figure 13A.
8. Connect the black battery cable to the negative (-) battery terminal.
9. Ensure the battery terminals are covered with the tiller boots.
NOTE: See figure 13B for correct hard-
ware placement for battery terminal con-
nections.
BATTERY TERMINALS
UNDER BOOTS
10. Reconnect the battery harnesses.
11. Reconnect the battery tie-down strap,
making sure the strap is positioned over
the frame release lever to ensure proper
securement. See figure 13C.
12. Reinstall the rear shroud and seat.
BATTERY
HARNESSES
NOTE: If you encounter a damaged or
cracked battery, immediately enclose it in
a plastic bag and contact your local waste
disposal agency or authorized Pride Pro-
vider for instructions on disposal and bat-
tery recycling, which is our recommended
course of action.
Figure 13. Battery Harnesses and Battery Cables
Celebrity X
27
Download from Www.Somanuals.com. All Manuals Search And Download.
I V . B A T T E R I E S A N D C H A R G I N G
Why do my new batteries seem weak?
Deep-cycle batteries employ a different
chemical technology than that used in car
40 amp
-
CIRCUIT BREAKER
BATTERY
+
batteries,
nickel-cadmium
batteries
(nicads), and other common battery types.
Deep-cycle batteries are specifically
designed to provide power, drain down
their charge and then accept a relatively
quick recharge.
-
BATTERY
+
Figure 13A. Battery Cable
Orientation
Figure 13B. Cable To Terminal
Connection
We work closely with our battery manu-
facturer to provide batteries that best suit
your scooter’s specific electrical demands.
Fresh batteries are shipped fully charged to
our customers. During shipping, the batter-
ies may encounter temperature extremes
that can influence their initial performance.
Heat diminishes the charge on the battery;
cold slows the available power and extends
the time needed to recharge the battery.
BATTERY TIE-DOWN STRAP
It may take a few days for the temperature
of your scooter’s batteries to stabilize and
adjust to their new room or ambient tem-
perature. More importantly, it takes a few
charging cycles (partial draining followed
by full recharging) to establish the critical
chemical balance that is essential to a deep-
cycle battery’s peak performance and long
life.
Figure 13C. Battery Tie-Down Strap
Follow these steps to properly break in your scooter’s new batteries for maximum efficiency and
service life:
1. Fully recharge any new battery prior to its initial use. This charging cycle brings the battery up to about
88% of its peak performance level.
2. Operate your new scooter in familiar and safe areas. Drive slowly at first and do not travel too far from
your home or familiar surroundings until you have become accustomed to your scooter’s controls and
have properly broken in your scooter’s batteries.
3. Fully recharge the batteries. They should be at over 90% of their peak performance level.
4. Operate your scooter again.
5. Fully recharge the batteries again.
6. After four or five charging cycles, the batteries are able to receive a charge of 100% of their peak
performance level and are able to last for an extended period of time.
What about public transportation?
If you intend to use public transportation with your scooter, you must contact the transportation provider
in advance to determine their specific requirements.
Celebrity X
28
Download from Www.Somanuals.com. All Manuals Search And Download.
V . O P E R A T I O N
BEFORE GETTING ONTO YOUR SCOOTER
ꢀ Have you fully charged the batteries? See IV. “Batteries and Charging.”
ꢀ Is the manual freewheel lever in the drive (rearward) position? Never leave the manual freewheel lever
pushed forward unless you are manually pushing your scooter.
ꢀ Is the tiller lock knob in the unlocked position? See VII. “Disassembly and Assembly.”
GETTING ONTO YOUR SCOOTER
1. Make certain that the key is removed from the key switch.
WARNING! Never attempt to get onto or off of your scooter without first removing the key
from the key switch. This will prevent the scooter from moving if accidental throttle
control lever contact is made.
2. Stand at the side of your scooter.
3. Disengage the seat rotation lever and rotate the seat until it is facing you.
4. Make certain that the seat is fixed securely in position.
5. Position yourself comfortably and securely in the seat.
6. Disengage the seat rotation lever and rotate the seat until you are facing forward.
7. Make certain that the seat is fixed securely in position.
8. Make certain that your feet are safely on the floorboard.
PRE-RIDE ADJUSTMENTS AND CHECKS
ꢀ Is the seat at the proper height? See VI. “Comfort Adjustments.”
ꢀ Is the seat fixed securely in place?
ꢀ Is the tiller at a comfortable setting and locked securely in place? See VI. “Comfort Adjustments.”
ꢀ Is the key fully inserted into the key switch and turned clockwise to the “on” position?
ꢀ Does the scooter’s horn work properly?
ꢀ Is your proposed path clear of people, pets, and obstacles?
ꢀ Have you planned your route to avoid adverse terrain and as many inclines as possible?
OPERATING YOUR SCOOTER
WARNING! The following can adversely affect steering and stability while operating your
scooter, resulting in loss of control or tipping:
ꢀ Holding onto or attaching a leash to walk your pet
ꢀ Carrying passengers (including pets)
ꢀ Hanging any article from the tiller
ꢀ Towing or being pushed by another motorized vehicle
Keep both hands on the tiller and your feet on the floorboard at all times while operating your scooter. This
driving position gives you the most control over your vehicle.
ꢀ Set the speed adjustment dial to your desired speed.
ꢀ Push or pull the appropriate side of the throttle control lever.
ꢀ The electromechanical disc park brake automatically disengages and the scooter accelerates smoothly
to the speed you preselected with the speed adjustment dial.
ꢀ Pull on the left handgrip to steer your scooter to the left.
ꢀ Pull on the right handgrip to steer your scooter to the right.
ꢀ Move the tiller to the center position to drive straight ahead.
ꢀ To stop, slowly release the throttle control lever. The electronic brakes will automatically engage,
bringing your scooter to a stop.
Celebrity X
29
Download from Www.Somanuals.com. All Manuals Search And Download.
V . O P E R A T I O N
NOTE: Your scooter’s reverse speed is slower than that of the forward speed you preset with the speed
adjustment dial.
GETTING OFF YOUR SCOOTER
1. Bring your scooter to a complete stop.
2. Remove the key from the key switch.
3. Disengage the seat rotation lever and rotate the seat until you are facing toward the side of your scooter.
4. Make certain that the seat is fixed securely in position.
5. Carefully and safely get out of the seat and stand to the side of your scooter.
6. You can leave the seat facing to the side to facilitate boarding your scooter next time.
POWER DOWN TIMER FEATURE
Your scooter is equipped with an energy saving automatic power down timer feature designed to preserve
your scooter’s battery life. If you mistakenly leave the key in the key switch and in the “on” position but
do not use your scooter for approximately 20 minutes, the scooter’s controller shuts down automatically.
Although the controller is shut down, power will still be supplied to the scooter’s lighting system.
If the power down timer feature takes effect, perform the following steps to resume normal operation:
1. Remove the key from the key switch.
2. Reinsert the key and power up your scooter.
Celebrity X
30
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . C O M F O R T A D J U S T M E N T S
TILLER ANGLE ADJUSTMENT
WARNING! Remove the key from the
key switch before adjusting the tiller
or the seat. Never attempt to adjust
the tiller or the seat while the scooter
is in motion.
TILLER ADJUSTMENT KNOB
Your scooter is equipped with an adjustable pivoting tiller.
1. While supporting the tiller, turn the tiller adjust-
ment knob counterclockwise to loosen the tiller.
See figure 14.
2. Move the tiller to a comfortable position.
3. Turn the tiller adjustment knob clockwise to secure
the tiller in position.
Figure 14. Tiller Adjustment
NOTE: In order to fully lower the tiller, you must first
remove the seat. Remove the seat by pulling it straight
up and off of the scooter.
SEAT ROTATION ADJUSTMENT
The seat rotation lever will secure the seat into several
positions.
1. Push forward on the seat rotation lever to disen-
gage the seat. See figure 15.
2. Rotate the seat to the desired position.
3. Release the lever to secure the seat into place.
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the seat forward or rearward to
adjust the distance between the seat and the tiller. See
figure 15.
1. Move the seat sliding lever outward.
2. While holding the lever out, slide the seat forward
or rearward.
SEAT SLIDING LEVER
SEAT ROTATION LEVER
Figure 15. Seat Adjustment Levers
ARMREST ADJUSTMENT KNOBS
3. Release the seat sliding lever once the seat is in the
desired position.
DETENT PINS
ARMREST WIDTH ADJUSTMENT
The armrest width can be adjusted inward or outward.
1. Loosen the armrest adjustment knobs. See figure 16.
2. Remove the detent pins.
3. Slide the armrests in or out to the desired width.
4. Align the adjustment holes on the seat frame and
armrest, then reinsert the detent pin.
5. Tighten the armrest adjustment knobs as required.
NOTE: Pivot the armrests upward to aid in getting
onto and off of your scooter.
Figure 16. Armrest Width Adjustment
Celebrity X
31
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . C O M F O R T A D J U S T M E N T S
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to different heights. See
figure 17.
1. Remove the seat and rear shroud from your
scooter. See VII. “Disassembly and Assembly.”
2. Loosen the seat height adjustment nut and
remove it from the bolt. Remove the bolt.
3. Loosen the clamp-action bolt.
4. Raise or lower the upper seat post to the desired
seat height.
5. While holding the upper seat post at that height,
match up the locating holes in the upper seat post
with those of the lower seat post.
6. Insert the seat height adjustment bolt through the
locating holes of both the upper and lower seat
posts.
UPPER SEAT POST
NUT
LOCATING
HOLES
SEAT HEIGHT
ADJUSTMENT
BOLT
NUT
CLAMP-ACTION BOLT
LOWER SEAT POST
7. Install the nut onto the bolt and tighten.
8. Tighten the clamp-action bolt.
9. Reinstall the rear shroud and the seat.
Figure 17. Seat Height Adjustment
MIRROR POSITION
To install the mirror (see figure 18):
1. Determine a side to install the mirror and remove
the rubber plug from the top of the tiller handle.
2. Insert the threaded end of the mirror holder into
the opening and rotate it clockwise until snug.
3. If necessary, rotate the nut clockwise to secure
the mirror in place.
MIRROR HOLDER
PLUG
NUT
To adjust the mirror:
1. Position yourself in a seated driving position
facing forward.
2. Adjust the mirror left, right, up, or down until
you have a good line of sight behind you.
Figure 18. Mirror Installation
Celebrity X
32
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . C O M F O R T A D J U S T M E N T S
POSITIONING BELT (OPTIONAL)
Your scooter seat may be equipped with an auto-type posi-
tioning belt that can be adjusted for operator comfort. See
figure 19. The positioning belt is designed to help support
the operator so that he/she does not slide down or forward
in the seat. The positioning belt is not designed for use as
a restraining device.
To install the positioning belt (if required):
1. Remove the seat from your scooter.
2. Place the seat upside down so that you can see the bot-
tom of the seat base.
3. Remove the two bolts on the outermost part of the rear
seat mounting strap.
4. Insert the bolt through the appropriate end of the posi-
tioning belt and then through the seat mounting strap
for each side of the scooter seat.
Figure 19. Positioning Belt
5. Tighten the bolts.
To adjust the positioning belt for operator comfort:
1. Insert the metal tab on the right side of the belt into the
plastic housing on the opposite strap until you hear a
“click.”
2. Pull the strap on the right side of the belt until it is
secure, but not so tight as to cause discomfort.
To release the positioning belt:
1. Press the push button mechanism on the plastic housing.
MANDATORY! Make sure the positioning
belt is properly secured to the scooter and
is adjusted for operator comfort.
MANDATORY! Inspect the positioning belt
for loose or damaged parts before each
use of the scooter. If you discover a
problem, contact your authorized Pride
Provider for maintenance and repair.
Celebrity X
33
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . C O M F O R T A D J U S T M E N T S
POWER SEAT ADJUSTMENT
Your scooter may be equipped with a power seat. The power seat actuator is designed to raise or lower the
seat with minimal effort on the part of the operator. The power seat switch is located on the tiller console.
WARNING! The power seat is intended for operation only while your scooter is stationary
and on a level surface. Its purpose is to aid you in reaching objects. Drive your scooter
only with the power seat in the lowest position. Driving the scooter with the power seat
elevated could cause instability in the scooter, resulting in a tip or a fall.
Strict adherence to the following safety rules is vital to your safety:
ꢀ Operate the power seat only while completely stationary on level ground.
ꢀ Do not press the throttle control lever and the power seat switch at the same time.
ꢀ Do not operate your scooter with the power seat elevated. Operate the scooter only
with the power seat fully retracted (in the lowest position).
ꢀ Never place your scooter in freewheel mode with the power seat elevated.
ꢀ Use extreme caution when reaching for objects with your power seat elevated. Do not
overextend or attempt to pick up objects that might affect your balance.
ꢀ Do not attempt to raise or lower the seat while in motion.
Before operating the power seat, ensure your scooter is level and stationary and the speed adjustment dial
is set to the slowest setting.
To operate the power seat:
1. Press and hold the upper part of the power seat switch (see figure 4) to raise the seat. Release the switch
when you have attained your desired height or upon reaching the highest position.
2. Press and hold the lower part of the power seat switch to lower the seat. Release the switch when you
have attained your desired height or upon reaching the lowest position.
NOTE: The scooter must be stopped in order for the power seat to be operated. If the power seat switch
is pressed while the scooter is in motion, the scooter will slow and come to a stop. The scooter may also
produce a fault code. If a fault code occurs, you will need to turn the scooter’s power off, then back on
again before proceeding.
Celebrity X
34
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I . D I S A S S E M B L Y A N D A S S E M B L Y
DISASSEMBLY
You can disassemble the scooter into seven pieces:
REAR SECTION
the seat, the front section, the rear section, the rear
shroud, the basket, and the batteries. See figure 20.
No tools are required to disassemble or assemble
your scooter, but keep in mind that the disassem-
SEAT
bled sections of the scooter take up more floor
space than the assembled unit. Always disassem-
ble or assemble your scooter on a level, dry surface
with sufficient room for you to work and move
around your scooter—about 6 feet (2 meters) in all
directions. Remember that some scooter compo-
nents are heavy and you may need assistance when
lifting them.
BATTERIES
REAR
FRONT SECTION
SHROUD
BASKET
WARNING! Do not lift beyond your
physical
capability.
Ask
for
Figure 20. The Scooter Disassembled
assistance when necessary while
disassembling or assembling your
scooter.
1. Place the scooter in drive mode by engaging the freewheel lever.
2. Lock the tiller in the straight ahead position by pushing the tiller lock knob in and turning it clockwise
90°. See figure 21. The front wheel must face forward in order to lock the tiller.
3. Remove the seat by lifting it straight up and off of the scooter. If you encounter resistance when
removing the seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up
on the seat.
4. Gently pull the rear shroud up and off of the rear section of the scooter.
5. Unplug the front-to-rear and rear lighting harnesses by squeezing the sides and pulling straight up.
6. Unplug both battery harnesses. Pull each harness straight up. See figure 22.
7. Unfasten the battery tie-down straps and remove the batteries from the battery wells.
LOCKED POSITION
UNLOCKED POSITION
Figure 21. Tiller Lock Knob (Locked)
Figure 21A. Tiller Lock Knob (Unlocked)
Celebrity X
35
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I . D I S A S S E M B L Y A N D A S S E M B L Y
8. Squeeze the tiller adjustment lever and lower
REAR LIGHTING HARNESS
the tiller to its lowest point. Adjust the tiller
console if necessary.
WARNING! Failure to unplug both
battery harnesses, the front-to-
rear harness, and rear lighting
harness prior to separating the
front and rear sections could
result in permanent damage to the
scooter.
Frame Separation
1. Lift up on the frame release lever. See figure 23.
BATTERY
2. Lift the front section up until the frame hooks
of the front section separate from the rear sec-
tion. See figure 23.
HARNESSES
FRONT-TO -REAR HARNESS
Figure 22. Harness Connections
NOTE: Stabilize the rear section with your free
hand by holding onto the upper frame tube. See
figure 24.
FRAME RELEASE LEVER
FRAME LOCK
3. Slowly separate the two sections. See figure 24.
ASSEMBLY
1. Position the front and rear sections of your
scooter as shown in figure 24.
2. Use the frame release lever to lift the front sec-
tion as you align the frame hooks of the front
section with the lower frame tube of the rear
section. See figure 23.
FRAME HOOK
3. Once the frame hooks are over the lower frame
tube, lower the front section completely. This
will engage the frame lock.
Figure 23. Frame Release
4. Raise the tiller.
5. Reinstall both batteries and secure with the
battery tie-down strap, making sure the strap is
positioned over the frame release lever to
ensure proper securement.
UPPER FRAME TUBE
6. Connect the front-to-rear harness, rear lighting
harness, and both battery harnesses. See figure 22.
7. Reinstall the rear shroud.
8. Reinstall the seat and rotate it into place.
9. Unlock the front wheel by turning the tiller lock
knob 90° counterclockwise. See figure 21A.
FRAME HOOK
LOWER FRAME TUBE
WARNING! After assembly, make
absolutely certain the tiller lock
knob is in the unlocked position
before riding your scooter.
Figure 24. Frame Separation
Celebrity X
36
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I I . B A S I C T R O U B L E S H O O T I N G
Any electromechanical device occasionally requires some troubleshooting. However, most of the prob-
lems that may arise can usually be solved with a bit of thought and common sense. Many of these problems
occur because the batteries are not fully charged or because the batteries are worn down and can no longer
hold a charge.
DIAGNOSTIC FAULT CODES
The diagnostic fault codes for your scooter are designed to help you perform basic troubleshooting quickly
and easily. The scooter will either display a diagnostic flash code or emit a beep code in the event one of
the conditions listed below develops.
NOTE: Your scooter will not run unless the fault code condition is resolved and the scooter has been
turned off, then turned back on.
FAULT CODE
CONDITION
SOLUTION
ꢀ
(1)
Battery charge is low.
Charge batteries as soon as possible.
Charge batteries.
ꢀ ꢀ (2)
Battery charge is too low.
ꢀ ꢀ ꢀ (3)
The scooter's battery voltage is too
high to operate the scooter, or the
Unplug charger and/or turn key off,
then back on again. If traveling
charger is still connected to the off- down a slope, reduce scooter speed
board charger port.
to the minimum setting.
ꢀ ꢀ ꢀ ꢀ (4)
Current limit time out.
Turn the scooter off for a few min-
utes, then turn your scooter back on.
ꢀ ꢀ ꢀ ꢀ ꢀ (5)
The manual freewheel lever is in the Remove the key from the key
(forward) freewheel position.
switch, then push the manual free-
wheel lever to the drive (rearward)
position and restart your scooter.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ (6)
Throttle control lever not at center
position at start up.
Return the throttle control lever to
center position, turn scooter off then
back on.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ (7)
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ (8)
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ (9)
Speed pot error.
Call your authorized Pride Provider
for assistance.
Motor volts error.
Other internal errors.
Call your authorized Pride Provider
for assistance.
Call your authorized Pride Provider
for assistance.
What if all the systems on my scooter seem to be “dead”?
ꢀ Make certain that the key is in the “on” position.
ꢀ Check that the batteries are fully charged.
ꢀ Push in the main circuit breaker reset button. See III. “Your Scooter.”
ꢀ Make certain that both battery harnesses and the front-to-rear harness are firmly connected. See VII.
“Disassembly and Assembly.”
ꢀ Be sure the power down timer feature has not been activated. See V. “Operation.”
Celebrity X
37
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I I . B A S I C T R O U B L E S H O O T I N G
What if my scooter does not move when I engage the throttle control lever?
ꢀ When the manual freewheel lever is pushed forward, the brakes are disengaged and all power to the
motor/transaxle assembly is cut.
ꢀ Push rearward on the manual freewheel lever, turn the scooter off and then turn the scooter on to return
to normal scooter operation.
What if the main circuit breaker repeatedly trips?
ꢀ Charge the scooter’s batteries more frequently. See IV. “Batteries and Charging.”
ꢀ If the problem continues, have both of your scooter’s batteries load tested by your authorized Pride
Provider.
ꢀ If the main circuit breaker trips repeatedly, contact your authorized Pride Provider for service.
ꢀ You may also perform the load test yourself. Battery load testers are available at most automotive parts
stores.
ꢀ Follow the directions supplied with the load tester.
ꢀ See IV. “Batteries and Charging” or “Appendix I - Specifications” for information about your
scooter’s battery type.
What if the battery condition meter dips way down and the motor surges or hesitates when I engage
the throttle control lever?
ꢀ Fully charge your scooter’s batteries. See IV. “Batteries and Charging.”
ꢀ Have your authorized Pride Provider load test each battery.
ꢀ Or, see the previous troubleshooting question for load testing the batteries yourself.
If you experience any problems with your scooter that you are not able to solve, immediately contact your
authorized Pride Provider for information, maintenance, and service.
Celebrity X
38
Download from Www.Somanuals.com. All Manuals Search And Download.
I X . C A R E A N D M A I N T E N A N C E
Your scooter requires a minimal amount of care and maintenance. If you do not feel confident in your
ability to perform the maintenance listed below, you may schedule inspection and maintenance at your
authorized Pride Provider. The following areas require periodic inspection and/or care and maintenance.
TIRE PRESSURE
ꢀ If equipped with pneumatic tires, always maintain the psi/bar/kPa air pressure indicated on each tire.
WARNING! It is important that the psi/bar/kPa air pressure indicated on each tire be
maintained in pneumatic tires at all times. Do not underinflate or overinflate your tires.
Low pressure may result in loss of control, and overinflated tires may burst. Failure to
maintain the psi/bar/kPa air pressure indicated on pneumatic tires at all times may result
in tire and/or wheel failure.
ꢀ Regularly inspect your scooter’s tires for signs of wear.
EXTERIOR SURFACES
Bumpers, tires, and trim can benefit from an occasional application of rubber or vinyl conditioner.
WARNING! Do not use a rubber or vinyl conditioner on the scooter’s vinyl seat or tire
tread, as this may cause them to become dangerously slippery.
CLEANING AND DISINFECTION
ꢀ Use a damp cloth and mild, non-abrasive cleanser to clean the plastic and metal parts of your scooter.
Avoid using products that may scratch the surface of your scooter.
ꢀ If necessary, clean your product with an approved disinfectant. Make sure the disinfectant is safe for
use on your product before application.
WARNING! Follow all safety instructions for the proper use of the disinfectant and/or
cleaning agent before applying it to your product. Failure to comply may result in skin
irritation or premature deterioration of upholstery and/or scooter finishes.
BATTERY TERMINAL CONNECTIONS
ꢀ Make certain that the terminal connections remain tight and uncorroded.
ꢀ The batteries must sit flat in the battery wells.
ABS PLASTIC SHROUDS
ꢀ The front tiller shroud, front shroud, and the rear shroud are formed from durable ABS plastic and are
coated with an advanced formula urethane paint.
ꢀ A light application of car wax will help the shrouds retain their high gloss.
MOTOR BRUSHES
The motor brushes are housed inside of the motor transaxle/assembly. They should be inspected periodi-
cally for wear by your authorized Pride Provider.
AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY
You do not need to lubricate these items, as they are all prelubricated and sealed.
Celebrity X
39
Download from Www.Somanuals.com. All Manuals Search And Download.
I X . C A R E A N D M A I N T E N A N C E
WHEEL REPLACEMENT
If your scooter is equipped with pneumatic tires and
you have a flat tire, you can have the tube replaced.
If your scooter is equipped with a solid tire insert,
either the solid insert or the entire wheel must be
replaced depending on the model. Contact your
authorized Pride Provider for information regarding
replacement wheels for your scooter.
AXLE KEY
DRIVE WHEEL
NUT
AXLE SLOT
WARNING! Wheels on your scooter
should only be serviced/replaced by
an authorized Pride Provider or
qualified technician.
DRIVE WHEEL WASHER
WARNING! Be sure that the key is
removed from the key switch and the
scooter is not in freewheel mode
before performing this procedure.
WHEEL CAP
Figure 25. Solid Tire Wheel Removal
Follow these easy steps for a quick and safe repair
for solid tires:
1. Remove the key from the key switch.
2. Elevate the side of the scooter of which you are
removing the tire. Place wooden blocks under the
frame to elevate the scooter.
3. Remove the drive wheel nut and washer from the
axle. See figure 25.
4. Pull the wheel off the axle.
5. Slide the new wheel back onto the axle. Make sure
that the axle key is in the axle slot. See figure 25.
WARNING! Failure to ensure that the
axle key is properly installed into
the axle slot when mounting the
wheel can result in electronic brake
failure,
personal
injury,
and/or
product damage.
6. Reinstall the drive wheel nut and washer onto the
axle and tighten.
WARNING! Make sure both the nut
and washer are reinstalled and
tightened properly.
7. Remove the block from beneath the scooter.
Celebrity X
40
Download from Www.Somanuals.com. All Manuals Search And Download.
I X . C A R E A N D M A I N T E N A N C E
WIRING HARNESSES
ꢀ Regularly check all wiring connections.
ꢀ Regularly check all wiring insulation, including the charger power cord, for wear or damage.
ꢀ Have your authorized Pride Provider repair or replace any damaged connector, connection, or insula-
tion that you find before using your scooter again.
PROHIBITED! Even though the scooter has passed the necessary testing requirements
for ingress of liquids, you should keep electrical connections away from sources of
dampness, including direct exposure to water or bodily fluids and incontinence. Check
electrical components frequently for signs of corrosion and replace as necessary.
NYLON LOCK NUT REPLACEMENT
Any nylon insert lock nut removed during the periodic maintenance, assembly, or disassembly of the
scooter must be replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause
damage to the nylon insert, resulting in a less secure fit. Replacement nylon insert lock nuts are available
at local hardware stores or through your authorized Pride Provider.
CONSOLE, CHARGER, AND ELECTRONIC CONTROLLER MODULE
ꢀ Keep these areas away from moisture.
ꢀ Before operating your scooter, allow any of these areas to dry thoroughly if they have been exposed to
moisture.
FUSES
To replace a fuse:
1. Remove the fuse by pulling it straight out of its slot.
2. Examine the fuse to be sure it is blown. See figures 26 and 26A.
3. Insert a new fuse of the proper rating.
WARNING! The replacement fuse must exactly match the rating of the fuse being
replaced. Failure to use properly rated fuses may cause damage to the electrical system.
Figure 26. Working Fuse
Figure 26A. Blown Fuse (Replace)
Celebrity X
41
Download from Www.Somanuals.com. All Manuals Search And Download.
I X . C A R E A N D M A I N T E N A N C E
STORING YOUR SCOOTER
If you plan on not using your scooter for an extended period of time, it is best to:
1. Fully charge its batteries prior to storage.
2. Disconnect the batteries from the scooter.
3. Store your scooter in a warm, dry environment.
4. Avoid storing your scooter where it will be exposed to temperature extremes.
WARNING! Always protect batteries from freezing temperatures and never charge a
frozen battery. Charging a frozen battery can result in damage to the battery.
Batteries that are regularly and deeply discharged, infrequently charged, stored in extreme temperatures,
or stored without a full charge may be permanently damaged, causing unreliable performance and limited
service life. It is recommended that you charge the scooter batteries periodically throughout periods of
prolonged storage to ensure proper performance.
You may wish to place several boards under the frame of your scooter to raise it off of the ground during
periods of prolonged storage. This takes the weight off the tires and reduces the possibility of flat spots
developing on the areas of the tires contacting the ground.
DISPOSAL OF YOUR SCOOTER
Your scooter must be disposed of according to applicable local and national statutory regulations. Contact
your local waste disposal agency or authorized Pride Provider for information on proper disposal of pack-
aging, metal frame components, plastic components, electronics, batteries, neoprene, silicone, and poly-
urethane materials.
Celebrity X
42
Download from Www.Somanuals.com. All Manuals Search And Download.
A P P E N D I X I - S P E C I F I C A T I O N S
Model Numbers
3-wheel: SC4001, 4-wheel: SC4401
Maximum Allowable Incline
6° (10.5%)
Maximum Obstacle Climbing Ability
2 in. (5 cm)
3
3-wheel: 46 in. (116.84 cm), 4-wheel: 46.75 in (118.75 cm)
Overall Length
3
24 in. (61 cm)
Overall Width
6
3-wheel: 144.5 lbs. (65.54 kg), 4-wheel: 154.5 lbs. (70.1 kg)
Total Weight Without Batteries
Heaviest Piece When Disassembled
Front section:
3-wheel: 56 lbs. (25.40 kg), 4-wheel: 65.5 lbs. (29.71 kg)
3
3-wheel: 41.5 in. (105.41 cm) 4-wheel: 54 in. (137.16 cm)
Up to 6 mph (9.66 km/h)
Turning Radius
1
Speed (Maximum)
1,
2
With 40 Ah batteries
3-wheel: 16.6 miles (27 km)
4-wheel: 14 miles (22.5 km)
Range Per Charge
Ground Clearance
Weight Capacity
2.25 in. (5.7 cm)
350 lbs. (159 kg)
Standard Seating Type
Medium back deluxe foldable molded plastic
Weight: 51 lbs. (23 kg)
Material: Vinyl
Dimensions:18 in. (45.72 cm) width
18 in. (45.72 cm) depth
Drive System
Tires
Rear-wheel drive, sealed transaxle, 24 volt DC motor
Solid
Front: 3.5 in. x 10 in. (8.89 cm x 25.40 cm)
Rear:4 in. x 10 in. (10.16 cm x 25.40 cm )
4,5
Two 12-volt, deep-cycle
Size: U-1 (40 Ah optional)
Weight: 24.50 lbs. (11 kg) each U-1; or 32.5 lbs. (14.75 kg) each 40 Ah
Battery Requirements
Battery Charger
Off-board
1
2
Varies with user weight, terrain type, battery amp-hour (Ah), battery charge, battery condition, and tire condi-
tion. This specification can be subject to a variance of (+ or -) 10%.
Tested in accordance with ASNI/RESNA, WC Vol 2, Section 4 & ISO 7176-4 standards. Results derived from
theoretical calculation based on battery specifications and drive system performance. Test conducted at maximum
weight capacity.
Due to manufacturing tolerances and continual product improvement, this specification can be subject to a
variance of (+ or - ) 3 %.
AGM or Gel-Cell type required. See IV. “Batteries and Charging.”
Battery weight may vary based on battery manufacturer.
Includes standard seat.
3
4
5
6
NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176
series EN12184 standards. All specifications subject to change without notice.
Celebrity X
43
Download from Www.Somanuals.com. All Manuals Search And Download.
A P P E N D I X I - S P E C I F I C A T I O N S
3-Wheel: 46 in. (116.84 cm)
4-Wheel: 46.75 in. (118.75 cm)
18 in.
(45.72 cm)
18 in.
(45.72 cm)
3-Wheel Turning Radius
41.5 in. (105.41 cm)
4- Wheel Turning Radius
54 in. (137.16 cm)
24 in. (61 cm)
16.5 - 18.5 in.
(41.91 - 47 cm)
2.25 in. (5.7 cm)
Figure 27. Scooter Dimensions
Celebrity X
44
Download from Www.Somanuals.com. All Manuals Search And Download.
N O T E S
Celebrity X
45
Download from Www.Somanuals.com. All Manuals Search And Download.
N O T E S
Celebrity X
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
*I NFMANU2995*
Download from Www.Somanuals.com. All Manuals Search And Download.
|