Owner’s Manual
ATTENTION:
Read all information
in this manual before
operating your PMV
The Ultimate In Style & Performance®
Exeter, PA
St. Catharines, ON
1-800-800-8586
Download from Www.Somanuals.com. All Manuals Search And Download.
C O N T E N T S
I.
INTRODUCTION......................................................................................................................... 4
II. SAFETY ......................................................................................................................................... 5
III. SPECIFICATIONS ................................................................................................................... 14
IV. YOUR PMV.................................................................................................................................. 16
V. BATTERIES AND CHARGING ............................................................................................ 20
VI. OPERATION............................................................................................................................... 24
VII. COMFORT ADJUSTMENTS................................................................................................ 26
VIII. BASIC TROUBLESHOOTING ............................................................................................. 29
IX. CARE AND MAINTENANCE ................................................................................................ 31
X. WARRANTY................................................................................................................................ 35
Mini Crosser
3
Download from Www.Somanuals.com. All Manuals Search And Download.
I . I N T R O D U C T I O N
SAFETY
WELCOME to Pride Mobility Products Corporation (Pride). The product you have purchased combines state-of
the-art components withsafety, comfort, and styling in mind. We are confident the design features will provide you
with the conveniences you expect during your daily activities. Understanding how to safely operate and care for
this product should bring you years of trouble free operations and service.
Read and follow all instructions, warnings, and notes in this manual and all other accompanying literature before
attempting to operate this product for the first time. In addition, your safety depends upon you, as well as your
provider, caretaker, or healthcare professional in using good judgement.
If there is any information in this manual which you do not understand, or if you require additional assistance for
setup or operation, please contact your authorized Pride Provider. Failure to follow the instructions, warnings,
and notes in this manual and those located on your Pride product can result in personal injury or product
damage and will void Pride’s product warranty.
PURCHASER’S AGREEMENT
By accepting delivery of this product, you promise that you will not change, alter, or modify this product or remove
or render inoperable or unsafe any guards, shields, or other safety features of this product; fail, refuse, or neglect to
install any retrofit kits from time to time provided by Pride to enhance or preserve the safe use of this product.
INFORMATION EXCHANGE
We want to hear your questions, comments, and suggestions about this manual. We would also like to hear about
the safety and reliability of your new Personal MobilityVehicle (PMV), and about the service you received from
your authorized Pride Provider. Please notify us of any change of address, so we can keep you apprised of
important information about safety, new products, and new options that can increase your ability to use and enjoy
your PMV. Please feel free to contact us at the address below:
Pride Mobility Products Corporation
Attn: Customer Care Department
182 SusquehannaAve.
Exeter, PA18643-2694
NOTE: If you ever lose or misplace your product registration card or your copy of this manual, contact
us and we will be glad to send you a new one immediately.
PRIDE OWNERS CLUB
As an owner of a Pride product, you are encouraged to enroll in the Pride Owners Club. Complete and return your
From our home page, select “Owners Club” to enter a page dedicated to current and potential Pride product
owners.You will gain access to interviews, stories, recreation ideas, daily living tips, product and funding informa-
tion, and interactive message boards. These message boards invite you to communicate with other Pride custom-
ers as well as Pride representatives who are available to assist you with any questions or concerns.
Mini Crosser
4
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
GENERAL
MANDATORY! Do not operate your new PMV for the first time without completely reading
and understanding this owner’s manual.
Your PMVis a state-of-the-art life-enhancement device designed to increase mobility. Pride provides an extensive
variety of products to best fit the individual needs of the PMVuser. Please be aware that the final selection and
purchasing decision regarding the type of PMV to be used is the responsibility of the PMV user who is capable of
making such a decision.
The contents of this manual are based on the expectation that a mobility device expert has properly fitted the PMV
to the user and has assisted the Pride Provider in the instruction process for the use of the product.
There are certain situations, including some medical conditions, where the PMV user will need to practice operat-
ing the PMVin the presence of a trained attendant.Atrained attendant can be defined as a family member or care
professional specially trained in assisting a PMV user in various daily living activities.
As you begin using your PMV during daily activities, you will probably encounter situations in which you will need
some practice. Simply take your time and you will soon be in full and confident control as you maneuver through
doorways, on and off elevators, up and down ramps, and over moderate terrain.
Below are some precautions, tips, and other safety considerations that will help the user become accustomed to
operating the PMV safely.
MODIFICATIONS
Pride has designed and engineered your PMVto provide maximum mobility and utility. However, under no cir-
cumstances should you modify, add, remove, or disable any feature, part, or function of your PMV.
WARNING! Do not modify your PMV in any way not authorized by Pride. Unauthorized
modifications may result in personal injury and/or damage to your PMV.
REMOVABLE PARTS
WARNING! Do not attempt to lift or move your PMV by any of its removable parts. Personal
injury and damage to the PMV may result.
Mini Crosser
5
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
PRE-RIDE SAFETY CHECK
Get to know the feel of your PMV and its capabilities. Pride recommends that you perform a safety check before
each use to make sure your PMV operates smoothly and safely.
Perform the following inspections prior to using your PMV:
! Check for proper tire inflation (if equipped with pneumatic tires).
! Check all electrical connections. Make sure they are tight and not corroded.
! Check all harness connections. Make sure they are secured properly.
! Check the brakes.
! Check battery charge.
If you discover a problem, contact your authorized Pride Provider for assistance.
TIRE INFLATION
If your PMV is equipped with pneumatic tires, you should check or have the air pressure checked at least once a
week. Proper inflation pressures will prolong the life of your tires and help ensure the smooth operation of your
PMV.
WARNING! It is critically important that 50 psi tire pressure be maintained in pneumatic
tires at all times. Do not underinflate or overinflate your tires. Low pressure may result in
loss of control, and overinflated tires may burst. Failure to maintain 50 psi tire pressure in
pneumatic tires at all times may result in tire and/or wheel failure, causing serious personal
injury and/or damage to your PMV.
WARNING! Inflate your PMV tires from a regulated air source with an available pressure
gauge. Inflating your tires from an unregulated air source could overinflate them, resulting
in a burst tire and/or personal injury.
WEIGHT LIMITATIONS
Your PMVis rated for a maximum weight capacity. Refer to the specifications table for information.
WARNING! Exceeding the weight capacity voids your warranty and may result in personal
injury and damage to your PMV. Pride will not be held responsible for injuries and/or property
damage resulting from failure to observe weight limitations.
WARNING! Do not carry passengers on your PMV. Carrying passengers may result in personal
injury and/or property damage.
INCLINE INFORMATION
More and more buildings have ramps with specified degrees of inclination, designed for easy and safe access.
Some ramps may have turning switchbacks (180-degree turns) that require you to have good cornering skills on
your PMV.
! Proceed with extreme caution as you approach the downgrade of a ramp or other incline.
! Take wide swings with your PMVaround any tight corners. If you do that, the PMV’s rear wheels will follow
a wide arc, not cut the corner short, and not bump into or get hung up on any railing corners.
! When driving down a ramp, keep the PMV’s speed adjustment set to the slowest speed setting to ensure a
safely controlled descent.
! Avoid sudden stops and starts.
Mini Crosser
6
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
When climbing an incline, try to keep your PMVmoving. If you must stop, start up again slowly, and then acceler-
ate cautiously.When driving down an incline, do so by setting the speed adjustment dial to the slowest setting and
driving in the forward direction only. If your PMV starts to move down the incline faster than you anticipated or
desired, allow it to come to a complete stop by releasing the throttle control lever. Then push the throttle control
lever forward slightly to ensure a safely controlled descent.
WARNING! When climbing an incline, do not zigzag or drive at an angle up the face of the
incline. Drive your PMV straight up the incline. This greatly reduces the possibility of a tip
or a fall. Always exercise extreme caution when negotiating an incline.
WARNING! Do not drive your PMV across the side of an incline or diagonally up or down an
incline; do not stop, if possible, while driving up or down an incline.
WARNING! You should not travel up or down a potentially hazardous incline (i.e., areas
covered with snow, ice, cut grass, or wet leaves).
WARNING! When on any sort of an incline or decline, never place the PMV in freewheel
mode while seated on it or standing next to it.
WARNING! Even though your PMV is capable of climbing slopes greater than illustrated in
figure 1, do not, under any circumstances, exceed the incline guidelines or any other
specifications presented in this manual. Doing so could cause instability in your PMV,
resulting in personal injury and/or damage to your PMV.
Handicap public access ramps are not subject to government regulation in all countries, and therefore do not
necessarily share the same standard percent of slope. Other inclines may be natural or, if man-made, not designed
specifically for PMVs. Figure 1 illustrates your PMV’s stability and its ability to climb grades under various weight
loads and under controlled testing conditions.
These tests were conducted with the PMV’s seat in the highest position and adjusted rearward on the seat base to
its farthest rearward position. Use this information as a guideline.Your PMV’s ability to travel up inclines is affected
by your weight, the PMV’s speed, the angle of approach to the incline, and your PMVsetup.
50 kg
10
º
330(L7B.6S.
)
%
Figure 1. Maximum Recommended Incline Angle
WARNING! Any attempt to climb or descend a slope steeper than what is shown in figure
1 may put your PMV in an unstable position and cause it to tip, resulting in personal injury.
Mini Crosser
7
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
When you approach an incline, it is best to lean forward. See figures 2 and 2A. This shifts the center of gravity of
you and your PMV toward the front of the PMVfor improved stability.
NOTE: When negotiating ramps, if the throttle control lever is released while moving forward, the
powered PMV may "rollback" approximately 1 foot before the brake engages. If the throttle control
lever is released while moving in reverse, the powered PMV may "rollback" approximately 3 feet before
the brake engages.
Figure 2. Normal Driving Position
Figure 2A. Increased Stability Driving Position
CORNERING INFORMATION
Excessively high cornering speeds can create the possibility of tipping. Factors which affect the possibility of
tipping include, but are not limited to, cornering speed, steering angle (how sharply you are turning), uneven road
surfaces, inclined road surfaces, riding from an area of low traction to an area of high traction (such as passing from
a grassy area to a paved area – especially at high speed while turning), and abrupt directional changes. High
cornering speeds are not recommended. If you feel that you may tip over in a corner, reduce your speed and
steering angle (i.e., lessen the sharpness of the turn) to prevent your PMV from tipping.
WARNING! When cornering sharply, reduce your speed. When using your PMV at higher
speeds, do not corner sharply. This greatly reduces the possibility of a tip or fall. To avoid
personal injury or property damage, always exercise common sense when cornering.
BRAKING INFORMATION
Your PMVis equipped with these powerful brake systems:
! Regenerative: Uses electricity to rapidly slow the vehicle when the throttle control lever returns to the center/
stop position.
! Disc Park Brake:Activates mechanically after regenerative braking slows the vehicle to near stop, or when
power is removed from the system for any reason.
! Handbrake: Gives you additional stopping power when squeezed.
Mini Crosser
8
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
OUTDOOR DRIVING SURFACES
Your PMVis designed to provide optimum stability under normal driving conditions—dry, level surfaces com-
posed of concrete, blacktop, or asphalt. However, Pride recognizes that there will be times when you will encoun-
ter other surface types. For this reason, your PMV is designed to perform admirably on packed soil, grass, and
gravel. Feel free to use your PMV safely on lawns and in park areas.
! Reduce your PMV’s speed when driving on uneven terrain and/or soft surfaces.
! Avoid tall grass that can become tangled in the running gear.
! Avoid loosely packed gravel and sand.
! If you feel unsure about a driving surface, avoid that surface.
STREETS AND ROADWAYS
WARNING! Use extreme caution when operating your PMV on public streets and roadways.
Be aware that it may be difficult for traffic to see you when you are seated on your PMV.
Obey all local pedestrian traffic rules. Wait until your path is clear of traffic, and then
proceed with extreme caution.
STATIONARY OBSTACLES (STEPS, CURBS, ETC.)
WARNING! Do not drive near raised surfaces, unprotected ledges, and/or drop-offs (curbs,
porches, stairs, etc.).
WARNING! Do not attempt to have your PMV climb or descend an obstacle that is
inordinately high. Serious personal injury and/or damage may result.
WARNING! Do not attempt to have your PMV proceed rearward down any step, curb, or
other obstacle. This may cause the PMV to tip and cause personal injury.
WARNING! Be sure your PMV is traveling perpendicular to any curb you may be required to
ascend or descend. See figures 3 and 3A.
WARNING! Do not attempt to negotiate a curb that has a height greater than 4.72 in.
Figure 3. Correct Curb Approach
Figure 3A. Incorrect Curb Approach
Mini Crosser
9
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
INCLEMENT WEATHER PRECAUTIONS
Exposure of your PMV to inclement weather conditions should be avoided whenever possible. If suddenly caught
up in rain, snow, severe cold or heat while operating your PMV proceed to shelter at the earliest opportunity.
Thoroughly dry your PMVbefore storing, charging, or operating your PMV.
WARNING! Operating in rain, snow, salt, mist/spray conditions, and on icy/slippery surfaces
can cause personal injury and/or damage to the PMV and electrical system. Maintain and
store your PMV in a dry and clean condition.
FREEWHEEL MODE
YourPMVis equipped with a manual freewheel lever that, when pushed down, allows the PMVto be pushed. For
more information about how to place your PMV into and out of freewheel mode, see IV. “Your PMV.”
WARNING! When your PMV is in freewheel mode, the braking system is disengaged.
! Disengage the drive motors only on a level surface.
! Ensure the key is removed from the key switch.
! Stand behind the PMV to engage or disengage freewheel mode. Never sit on a
PMV to do this.
! After you have finished pushing your PMV, always return it to the drive mode to lock
the brakes.
Failure to heed the above could result in personal injury and/or damage to your PMV.
An added feature is built into the PMV which safeguards against gaining excessive speed while in freewheel
mode. If the freewheel lever is disengaged from drive mode while the key is in the on position, you will encoun-
ter resistance as the PMV’s controller activates regenerative braking preventing the vehicle from rolling freely.
Whenever freewheel mode is desired, the power must be off.
NOTE: If the PMV is placed in freewheel mode (manual freewheel lever pushed down) while the key is
in the “on” position, the PMV will not run until the manual freewheel lever is pulled up and the key is
turned to the “off” position, then back to the “on” position.
STAIRS AND ESCALATORS
PMVs are not designed to travel up or down stairs or escalators.Always use an elevator.
WARNING! Do not use your PMV to negotiate steps or escalators. You may cause injury to
yourself and to others and/or damage your PMV.
DOORS
! Determine if the door opens toward or away from you.
! Use your hand to turn the knob or push the handle or push-bar.
! Drive your PMV gently and slowly forward to push the door open. Or drive your PMV gently and slowly
rearwards to pull the door open.
LIFT/ELEVATION PRODUCTS
If you will be traveling with your PMV, you may find it necessary to use a lift/elevation product to aid in transpor-
tation. Pride recommends that you closely review the instructions, specifications, and safety information set forth
by the manufacturer of the lift/elevation product before using that product.
Mini Crosser
10
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
ELEVATORS
Modern elevators have a door edge safety mechanism that, when pushed, reopens the door(s).
! If you are in the doorway of an elevator when the door(s) begin to close, push on the rubber door edge or
allow the rubber door edge to contact the PMV and the door will reopen.
! Use care that pocketbooks, packages, or PMV accessories do not become caught in elevator doors.
NOTE: If your PMV’s turning radius is greater than 60 in., it may be difficult to maneuver in elevators
and building entrances. Use caution when attempting to turn or maneuver your PMV in small spaces,
and avoid areas that might pose a problem.
BATTERIES
In addition to following the warnings below, be sure to comply with all other battery handling information.
WARNING! PMV batteries are heavy (refer to specifications table). Lifting weight beyond
your capacity could result in personal injury. If necessary, get someone physically able to
lift the PMV batteries for you.
WARNING! Battery posts, terminals, and related accessories contain lead and lead
compounds. Wash hands after handling.
WARNING! Always protect the batteries from freezing and never charge a frozen battery.
Charging a frozen battery may result in personal injury and/or damage to the battery.
WARNING! RED (+) cables must be connected to positive (+) battery terminals/posts. BLACK
(-) cables must be connected to negative (-) battery terminals/posts. Failure to connect
your battery harnesses in the proper manner may result in personal injury and/or damage
to your PMV. REPLACE cables immediately if damaged.
BATTERY DISPOSAL AND RECYCLING
If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag and call your authorized
Pride Provider for instructions on disposal.Your authorized Pride Provider will also have the necessary information
on battery recycling, which is our recommended course of action.
MOTOR VEHICLE TRANSPORT
Currently, there are no standards approved for tie-down systems in a moving vehicle of any type to transport a
person while seated in a PMV.
Although your PMV may be equipped with a positioning belt, this belt is not designed to provide proper restraint
during motor vehicle transport.Anyone traveling in a motor vehicle should be properly secured in the motor vehicle
seat with safety belts fastened securely.
WARNING! Do not sit on your PMV while it is in a moving vehicle. Personal injury and/or
property damage may result.
WARNING! Ensure your PMV and its batteries are properly secured when being transported.
Failure to do so may result in personal injury and/or damage to your PMV.
Mini Crosser
11
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
PREVENTING UNINTENDED MOVEMENT
WARNING! If you anticipate being seated in a stationary position for an extended period
of time, turn off the power. This will prevent unexpected motion from inadvertent throttle
control lever contact. Failure to do so may result in personal injury.
GETTING ONTO AND OFF OFYOUR PMV
Getting onto and off of your PMV requires a good sense of balance. Please observe the following safety tips when
getting onto and off of your PMV:
! Remove the key from the key switch.
! Ensure that your PMV is not in freewheel mode. See IV. “Your PMV.”
! Make certain that the seat is locked into place.
! Flip up the armrests up to make getting onto and off of the PMV easier.
WARNING! Position yourself as far back as possible in the PMV seat to prevent the PMV
from tipping and causing injury.
WARNING! Avoid using your armrests for weight bearing purposes. Such use may cause
the PMV to tip and cause personal injury.
WARNING! Avoid putting all of your weight on the floorboard. Such use may cause the
PMV to tip and cause personal injury.
REACHING AND BENDING
Avoid reaching or bending while driving your PMV. Bending forward creates the risk of accidental throttle control
lever contact. Bending to the side while seated creates the risk of tipping. It is important to maintain a stable center
of gravity and keep the PMV from tipping. Pride recommends that the PMV user determine his/her personal
limitations and practice bending and reaching in the presence of a qualified attendant.
WARNING! Do not bend, lean, or reach for objects if you have to pick them up from the
PMV deck or from either side of the PMV. Movements such as these may change your
center of gravity and the weight distribution of the PMV and cause your PMV to tip, possibly
resulting in personal injury.
WARNING! Prevent personal injury! Keep your hands away from the tires when driving. Be
aware that loose fitting clothing can become caught in drive tires.
POSITIONING BELTS
Your authorized Pride Provider, therapist(s), and other healthcare professionals are responsible for determining
your requirement for a positioning belt in order to operate your PMVsafely.
WARNING! If you require a positioning belt to safely operate your PMV, make sure it is
fastened securely. Serious personal injury may result if you fall from the PMV.
Mini Crosser
12
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
PRESCRIPTION DRUGS/PHYSICAL LIMITATIONS
The PMVuser must exercise care and common sense when operating his/her PMV. This includes awareness of
safety issues whentaking prescribed or over-the-counter drugs or when the user has specific physical limitations.
WARNING! Consult your physician if you are taking prescribed or over-the-counter
medication or if you have certain physical limitations. Some medications and limitations
may impair your ability to operate your PMV in a safe manner.
ALCOHOL
The PMV user must exercise care and common sense when operating his/her PMV. This includes awareness of
safety issues while under the influence of alcohol.
WARNING! Do not operate your PMV while you are under the influence of alcohol, as this
may impair your ability to drive safely.
ELECTROMAGNETIC AND RADIO FREQUENCY INTERFERENCE (EMI/RFI)
WARNING! Laboratory tests have shown that electromagnetic and radio frequency waves
can have an adverse affect on the performance of electrically-powered mobility vehicles.
Electromagnetic and Radio Frequency Interference can come from sources such as cellular phones, mobile two-
way radios (such as walkie-talkies), radio stations, TV stations, amateur radio (HAM) transmitters, wireless
computer links, microwave signals, paging transmitters and medium-range mobile transceivers used by emergency
vehicles. In some cases, these waves can cause unintended movement or damage to the control system. Every
electrically-powered mobility vehicle has an immunity (or resistance) to EMI. The higher the immunity level, the
greater the protection against EMI. This product has been tested and has passed at an immunity level of 20 V/M.
WARNING! Be aware that cell phones, two-way radios, laptops, and other types of radio
transmitters may cause unintended movement of your electrically-powered mobility vehicle
due to EMI. Exercise caution when using any of these items while operating your mobility
vehicle and avoid coming into close proximity of radio and TV stations.
WARNING! The addition of accessories or components to the electrically-powered mobility
vehicle can increase the susceptibility of the vehicle to EMI. Do not modify your PMV in
any way not authorised by Pride.
WARNING! The electrically-powered mobility vehicle itself can disturb the performance
of other electrical devices located nearby, such as alarm systems.
unintended motion or brake release occurs, turn the PMV off as soon as it is safe to do so. Call Pride at
800-424-8205 to report the incident.
Mini Crosser
13
Download from Www.Somanuals.com. All Manuals Search And Download.
I I I . S P E C I F I C A T I O N S
15.7" - 20"
5"
3-wheel: 52.4"
4-wheel: 54"
18.89"
17.32"
3-wheel: 41"
4-wheel: 55.50"
Turning Radius
25.6"
Figure 4. PMV Dimensions
3.93"
13"
Figure 4A.Tire Dimensions (Front And Rear)
Mini Crosser
14
Download from Www.Somanuals.com. All Manuals Search And Download.
I I I . S P E C I F I C A T I O N S
3-wheel: PMV130T3
4-wheel: PMV130T4
Model Number
See figure 1.
4.7 in.
Blue
3-wheel: 52.4 in.
Maximum Climbing Ability
MaximumObstacle Climbing Ability
Color
Overall Length2
4-wheel: 54 in.
25.6 in.
3-wheel: 422 lbs.
Overall Width2
Total Weight
4-wheel: 445 lbs.
3-wheel: 312 lbs.
Total Weight Without Batteries
4-wheel: 335 lbs.
55 lbs. each
Main frame
3-wheel: 41 in.
Battery Weight (70 AH)
Heaviest Piece When Disassembled
Turning Radius2
4-wheel: 55.5 in.
Up to 8 mph
Speed (Maximum)
Range Per Charge1
(With 70 AH batteries)
Ground Clearance2
Weight Capacity
3-wheel: Up to 30 miles maximum
4-wheel: Up to 37 miles maximum
5.1 in.
330 lbs.
Type: High-Back
Standard Seating
Material: black vinyl
Weight: 40 lbs.
Rear-wheel drive, sealed mini transaxle, 24 volt DC motor
Electronic, regenerative, electromechanical, handbrake
Type: pneumatic: front and rear: 3.93 in. x 13 in.
Type: Two 12 volt, deep-cycle (AGM or Gel-Cell type recommended)
Size: Group 24 (70 AH)
Drive System
Dual Braking System
Tires
Battery Requirements
Off-board charger
Battery Charger
(1) Varies with user weight, terrain type, battery charge, battery condition, and tire condition.
(2) Due to manufacturing tolerances and continual product improvement, this specification can be subject to variance of (+ or – ) 3 %.
NOTE: All specifications subject to change without notice.
Mini Crosser
15
Download from Www.Somanuals.com. All Manuals Search And Download.
I V . Y O U R P M V
TILLER CONSOLE
The tiller console houses all of the controls needed to drive your PMV. See figure 5.
WARNING! Do not expose the tiller console to moisture. In the event that the tiller console
does become exposed to moisture, do not attempt to operate your PMV until the tiller
console has dried thoroughly.
BATTERY CONDITION METER/STATUS LED
LIGHTS BUTTON
HAZARD LIGHTS BUTTON
HANDBRAKE
HANDBRAKE LOCK
TURN SIGNAL
BUTTONS
TURN SIGNAL
BUTTONS
PUSHTO GO IN REVERSE
PULLTO GO FORWARD
HORN BUTTON
HORN BUTTON
SPEED ADJUSTMENT DIAL
Figure 5.Tiller Console
Figure 5A.Throttle Control Lever
Battery Condition Meter
WhenthekeyisfullyinsertedandturnedclockwisetopowerupyourPMV, thismeterindicatestheapproximatebattery
voltagestrength. Forfurtherinformationonbatterycharging, seeV. “BatteriesandCharging.”
Status LED
The battery condition meter doubles as a status LED which alerts you to electrical problems that may occur with
the PMV. If your PMVdevelops an electrical problem, the status LED will flash a code. SeeVIII. “BasicTrouble-
shooting” for flash codes.
Turn Signal Buttons
! Press the appropriate turn signal button once to activate it.
! Press the same indicator button to turn it off.
Hazard Lights Button
This switch activates the 4-way flashers on your PMV.
! Push the hazard lights button to turn on the flashers.
! Push the hazard lights button again to turn off the flashers.
Handbrake
! Release the throttle control lever and squeeze the handbrake for additional stopping power.
! To lock the handbrake into place, squeeze it fully and push the handbrake lock to the right.
! To disengage the handbrake lock, squeeze the handbrake.
Mini Crosser
16
Download from Www.Somanuals.com. All Manuals Search And Download.
I V . Y O U R P M V
Throttle Control Lever
This lever allows you to control the forward speed and the reverse speed of your PMV up to the maximum speed
you preset with the speed adjustment dial. See figure 5A.
! Place your right hand on the right handgrip and your left hand on the left handgrip.
! Use your right thumb to push the throttle control lever to disengage your PMV’s brakes and move rearward.
! Use your right forefingers to pull back on the throttle control lever to move forward.
! When the throttle control lever is completely released, it automatically returns to the center “stop” position and
engages your PMV’s brakes.
NOTE: Allow your PMV to come to a complete stop before going from forward to reverse or reverse to forward.
Horn Buttons
These buttons activate a warning horn. The PMV must be powered up for the horn to be operational. Do not
hesitate to use the warning horn when doing so may prevent accident or injury.
Lights Button
This button controls your PMV’s lights.
! Push the light button to turn on your PMV’s running lights.
! Push the button again to turn off the lights.
WARNING! PMV users are required to use their lights when visibility is restricted—
day or night. Failure to use the lighting system in periods of poor visibility may result
in personal injury.
Speed Adjustment Dial
This dial allows you to preselect and limit your PMV’s top speed.
! The image of the tortoise represents the slowest speed setting.
! The image of the hare represents the fastest speed setting.
Key Switch
NOTE: If the key is moved to the
“off” position while your PMV is
in motion, the PMV will come to
a normal stop.
! Insertthekeyintothekeyswitchandturnitclock-
wise to power up (turn on) your PMV — (1) indi-
catestheonposition. See figure 6.
! Turnthekeycounterclockwisetopowerdown(turn
CHARGER PORT
off) your PMV — (0) indicates the off position.
Charger Port
The (3-pin) off-board charger cord plugs into
this port.
KEY SWITCH
Figure 6. LowerTiller Components
Mini Crosser
17
Download from Www.Somanuals.com. All Manuals Search And Download.
I V . Y O U R P M V
REAR SECTION
Anti-TipWheels
The anti-tip wheels are an integral and important
safety feature of your PMV. Do not, under any cir-
cumstances, remove the anti-tip wheels from your
PMV. See figure 7.
PROHIBITED! Do not remove the
anti-tip wheels or modify your PMV
in any way that is not authorized
by Pride.
ANTI-TIP WHEELS
Figure 7. Anti-TipWheels
MANUAL FREEWHEEL LEVER
WARNING! The anti-tip wheels are
bolted to the PMV frame and may
cause trouble when ascending or
descending a curb.
Manual Freewheel Lever
Whenever you need or want to push your PMV for
short distances, you can put it in freewheel mode. See
figure 8.
! Remove the key from the key switch.
! Push down on the manual freewheel lever to dis-
able the drive system and the brake system.
! You may now push your PMV.
! Pull up on the manual freewheel lever to reengage
the drive and the brake systems and take your
PMV out of freewheel mode.
Figure 8. Manual Freewheel Lever
WARNING! When your PMV is in freewheel mode, the braking system is disengaged.
Adhere to the following safety information to avoid personal injury and/or damage to your
PMV.
PMV is in drive mode; do not sit on the PMV when the drive motors are
disengaged.
Disengage the drive motors only on a level surface.
Place unit on level ground and stand behind or to one side when changing
from drive mode to freewheel mode or freewheel mode to drive mode. Never
sit on a PMV to do this.
NOTE: If the PMV is placed in freewheel mode (manual freewheel lever down) while the key is in the “on”
position, the PMV will not run until the manual freewheel lever is pulled up and the key is turned to the
“off” position, then back to the “on” position.
Mini Crosser
18
Download from Www.Somanuals.com. All Manuals Search And Download.
I V . Y O U R P M V
Batteries (Not Shown)
The batteries store electrical energy that powers your PMV. See V. “Batteries and Charging ” for information on
how to charge your PMV batteries.
Motor/Transaxle Assembly (Not Shown)
The motor/transaxle assembly is an electromechanical unit that converts electrical energy from your PMV’s bat-
teries into the controlled mechanical energy that drives the PMV’s wheels.
Fuses
Thesefuses, located at the rear of the PMV under the
rear shroud, help protect your PMV’s electrical sys-
FUSE 1
tems from receiving an overload of electrical current.
The fuses used in your PMV are the same type used in
automobiles. See figure 9. SeeVIII. “Basic Trouble-
shooting”forfusereplacement.
FUSE 2
FUSE 3
FUSE 4
FUSE 5
Fuse
Amperage
40-amp
10-amp
10-amp
40-amp
40-amp
System
Charging
Controller
Power Seat
Spare
1
2
3
4
5
Spare
Figure 9. Fuses
SECUREMENT POINTS
Steel loops welded to the rear of the PMV and front
frame components of your PMV provide securement
points. These points are marked with a sticker. See
figure 10. These should only be used with an unoccu-
pied PMV and secured by an approved securement
system in accordance with the manufacturer’s instruc-
tions. Pride makes no representation of suitability for
use with specific securement systems nor can we an-
ticipate the various situations that might arise in use of
public transportation systems. For detailed instruc-
tions on the use of securements, refer to the appli-
cable municipal transit authority and/or manufacturer
of the system used.
Figure 10. Marks Designated
Securement Points
WARNING! DO NOT leave the PMV in freewheel mode when securing it for transport.
WARNING! DO NOT use your PMV as a seat in a moving vehicle.
Mini Crosser
19
Download from Www.Somanuals.com. All Manuals Search And Download.
V. B AT T E R I E S A N D C H A R G I N G
Your PMVrequires two long-lasting, 12-volt, deep-cycle batteries that are sealed and maintenance free. They are
recharged by an off-board charging system.
! Charge your PMV’s batteries prior to using it for the first time.
! Keep the batteries fully charged to keep your PMVrunning smoothly.
READING YOUR BATTERY VOLTAGE
The battery condition meter on the tiller console indicates
theapproximatestrengthofyourbatteriesusingacolorcode.
Seefigure11. Fromrighttoleft, greenindicatesfullycharged
batteries, yellow a draining charge, and red indicates that an
immediate recharge is necessary.
-
+
NOTE: To ensure the highest accuracy, the battery
condition meter should be checked while operating
your PMV at full speed on a dry, level surface.
Figure 11. Battery Condition Meter
CHARGING YOUR BATTERIES
PROHIBITED! Never use an extension cord to plug in your battery charger. Plug the charger
directly into a properly wired standard electrical outlet.
PROHIBITED! Removal of the grounding prong can create an electrical hazard. If
necessary, properly install an approved 3-pronged adapter to an electrical outlet having 2-
pronged plug access. Failure to heed could result in personal injury and/or property damage.
WARNING! Ensure that both ends of the charger power cord are clean and dry before
plugging the charger power cord into the off-board battery charger port or the electrical
outlet.
Follow these easy steps to charge your batteries safely:
1. Position your PMV close to a standard electrical outlet.
2. Remove the key from the key switch.
3. Make certain that the manual freewheel lever is in the drive position.
4. Plug the charger power cord into the charger port on your PMV.
5. Plug the off-board charger into a standard electrical outlet and turn the charger on.
NOTE: We recommend that you charge the batteries for 8 to 14 hours.
6. When the batteries are fully charged, unplug the charger power cord from the electrical outlet and then from the
charger port.
NOTE: There is a charger inhibit function on your PMV. The PMV will not run and the battery condi-
tion meter will not operate while the batteries are charging.
Mini Crosser
20
Download from Www.Somanuals.com. All Manuals Search And Download.
V. B AT T E R I E S A N D C H A R G I N G
FREQUENTLY ASKED QUESTIONS
How does the charger work?
When your PMV’s battery voltage is low, the charger works harder, sending more electrical current to the batteries
to bring up their charge.As the batteries approach a full charge, the charger sends less and less electrical current.
When the batteries are fully charged, the current sent from the charger is at nearly zero amperage. Therefore, when
the charger is plugged in, it maintains the charge on your PMV’s batteries, but does not overcharge them. We do
not recommend that you charge your PMV’s batteries for more than 24 consecutive hours.
What if my PMV’s batteries won’t charge?
! Ensure the red (+) and black or blue (-) battery cables are connected properly to the battery terminals.
! Ensure both ends of the charger power cord are inserted fully.
Can I use a different charger?
For the safest, most efficient, and balanced charging of your PMV’s batteries, we prefer and highly recommend
simultaneous charging of both batteries with the off-board battery charger supplied with your PMV.
How often must I charge the batteries?
Two major factors must be considered when deciding how often to charge your PMV’s batteries:
! All day PMV use on a daily basis.
! Infrequent or sporadic PMV use.
With these considerations in mind, you can determine how often and for how long you should charge your PMV’s
batteries. We designed the charger so that it will not overcharge your PMV’s batteries. However, you may en-
counter some problems if you do not charge your batteries often enough and if you do not charge them on a regular
basis. Following the guidelines below will provide safe and reliable battery operation and charging.
! If you use your PMV daily, charge its batteries as soon as you finish using it for the day. Your PMVwill be
ready each morning. We recommend that you charge your PMV’s batteries for 8 to 14 hours after daily use.
! If you use your PMV once a week or less, charge its batteries at least once a week for 12 to 14 hours at a time.
! Keep your PMV’s batteries fully charged.
! Avoid deeply discharging your PMV’s batteries.
How can I ensure maximum battery life?
Fully charged deep-cycle batteries provide reliable performance and extended battery life. Keep your PMV’s batter-
ies fully charged whenever possible. Batteries that are regularly and deeply discharged, infrequently charged, or
stored without a full charge may be permanently damaged, causing unreliable performance and limited service life.
How can I get maximum range or distance per charge?
Rarely will you have ideal driving conditions—smooth, flat, hard driving surfaces with no wind or curves. Often, you will
face hills, pavement cracks, uneven and loosely packed surfaces, curves, and wind, all of which affect the distance or
running time per battery charge. Below are a few suggestions for obtaining the maximum range per battery charge.
! Always fully charge your PMV’s batteries prior to daily use.
! Maintain 50 psi in each tire.
! Plan your route ahead to avoid as many hills, cracked, broken, or soft surfaces as possible.
Mini Crosser
21
Download from Www.Somanuals.com. All Manuals Search And Download.
V. B AT T E R I E S A N D C H A R G I N G
! Limit your baggage weight to essential items.
! Try to maintain an even speed while your PMVis
inmotion.
TERMINAL BOOTS
! Avoid stop-and-go driving.
What type and size of battery should I use?
We recommend deep-cycle batteries that are sealed
and maintenance free. Both AGM and Gel-Cell are
deep-cycle batteries that are similar in performance.
Do not use wet-cell batteries, which have removable
caps. Refer to the specifications table for information.
NOTE: Sealed batteries are not serviceable. Do
not remove the caps.
BATTERY STRAPS
Figure 12. Battery Straps
To change a battery in your PMV:
BATTERY TERMINAL
BATTERY CABLE
WARNING! Corrosive chemicals are
contained in batteries. Use only
AGM or Gel-Cell batteries to reduce
the risk of leakage or explosive
conditions.
WARNING! Battery posts, terminals,
and related accessories contain
lead and lead compounds. Wash
hands after handling.
1. Remove the key from the key switch.
2. Remove the seat and rear shroud. See VII. “Com-
fortAdjustments.”
3. Disconnectthebatterytie-downstrap. Seefigure12.
4. Pull back the terminal boot and disconnect the
battery cables from the battery terminals. See fig-
ure 13.
Figure 13. Battery Cable Removal From The Terminal
5. Remove the old battery.
6. Place a new battery in the battery well.
7. Reconnect the red positive (+) battery cable to
the positive (+) battery terminal. See figure 14.
8. Reconnect the black or blue negative (-) battery
cable to the negative (-) battery terminal.
NOTE: Ensure both battery terminals are cov-
ered with the terminal boots. See figure 12.
10. Reconnect the battery tie-down strap.
11. Reinstall the rear shroud and seat.
Figure 14. Battery Cable Orientation
Mini Crosser
22
Download from Www.Somanuals.com. All Manuals Search And Download.
V. B AT T E R I E S A N D C H A R G I N G
NOTE: If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag and call
your authorized Pride Provider for instructions on disposal. Your authorized Pride Provider will also
have the necessary information on battery recycling, which is our recommended course of action.
Why do my new batteries seem weak?
Deep-cycle batteries employ a different chemical technology than that used in car batteries, nickel-cadmium bat-
teries (nicads), and other common battery types. Deep-cycle batteries are specifically designed to provide power,
drain down their charge, and then accept a relatively quick recharge.
We work closely with our battery manufacturer to provide batteries that best suit your PMV’s specific electrical
demands. Batteries are shipped fully charged to our customers. During shipping, the batteries may encounter
temperature extremes that can influence their initial performance. Heat diminishes the charge on the battery; cold
slows the available power and extends the time needed to recharge the battery.
It may take a few days for the temperature of your PMV’s batteries to stabilize and adjust to their new room or
ambient temperature.
More importantly, it takes a few charging cycles (partial draining followed by full recharging) to establish the critical
chemical balance that is essential to a deep-cycle battery’s peak performance and long life.
Follow these steps to properly break in your PMV’s new batteries for maximum efficiency and service life.
1. Fully recharge any new battery prior to its initial use. This charging cycle brings the battery up to about 88% of
its peak performance level.
2. Operate your new PMV in familiar and safe areas. Drive slowly at first, and do not travel too far from your
home or familiar surroundings until you have become accustomed to your PMV’s controls and have properly
broken in your PMV’s batteries.
3. Fully recharge the batteries. They should be at over 90% of their peak performance level.
4. Operate your PMV again.
5. Fully recharge the batteries again.
6. After four or five charging cycles, the batteries are able to receive a charge of 100% of their peak performance
level and are able to last for an extended period of time.
What about public transportation?
If you intend to use public transportation with your PMV, you must contact the transportation provider in advance
to determine their specific requirements.
Mini Crosser
23
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . O P E R A T I O N
BEFORE GETTING ONYOUR PMV
! Have you fully charged the batteries? SeeV. “Batteries and Charging.”
! Is the manual freewheel lever in the drive (up) position? Never leave the manual freewheel lever in the down
position unless you are manually pushing your PMV.
GETTING ONTOYOUR PMV
1. Make certain that the key is removed from the key switch.
WARNING! Never attempt to get onto or off of your PMV without first removing the key
from the key switch. This will prevent the PMV from moving if accidental throttle control
lever contact is made.
2. Stand at the side of your PMV.
3. Disengage the seat rotation lever and rotate the seat until it is facing you.
4. Make certain that the seat is locked securely in position.
5. Position yourself comfortably and securely in the seat.
6. Disengage the seat rotation lever and rotate the seat until you are facing forward.
7. Make certain that the seat is locked securely in position.
8. Make certain that your feet are safely on the floorboard.
PRE-RIDE ADJUSTMENTS AND CHECKS
! Are you positioned comfortably in the seat? See “Getting OntoYour PMV” above.
! Is the seat at the proper height? SeeVII. “ComfortAdjustments.”
! Is the seat locked securely in place?
! Is the tiller at a comfortable setting and locked securely in place? SeeVII. “ComfortAdjustments.”
! Is the key fully inserted into the key switch and turned clockwise to the “on” position?
! Does the PMV’s horn work properly?
! Is your proposed path clear of people, pets, and obstacles?
! Have you planned your route to avoid adverse terrain and as many inclines as possible?
OPERATING YOUR PMV
WARNING! The following can adversely affect steering and stability while operating your
PMV:
! Holding onto or attaching a leash to walk your pet
! Carrying passengers (including pets)
! Hanging any article from the tiller
! Towing or being pushed by another motorised vehicle
Such practices could cause loss of control and/or tipping resulting in personal injury and/
or damage to your PMV.
Keep both hands on the tiller and your feet on the floorboard at all times while operating your PMV. This driving
position gives you the most control over your vehicle.
! Set the speed adjustment dial to your desired speed.
! Engage the throttle control lever to move forward or in reverse.
! The electromechanical disc park brake automatically disengages and the PMV accelerates smoothly to the
speed you preselected with the speed adjustment dial.
Mini Crosser
24
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . O P E R A T I O N
! Pull on the left handgrip to steer your PMV to the left.
! Pull on the right handgrip to steer your PMV to the right.
! Move the tiller to the center position to drive straight ahead.
! To stop, slowly release the throttle control lever.After you release the throttle control lever, gently squeeze the
handbrake to come to a complete stop. The electronic brakes will automatically engage when your PMV
comes to a stop.
NOTE: Your PMV’s reverse speed is slower than that of the forward speed you preset with the speed
adjustment dial.
GETTING OFF OFYOUR PMV
1. Bring your PMV to a complete stop.
2. Remove the key from the key switch.
3. Disengage the seat rotation lever and rotate the seat until you are facing toward the side of your PMV.
4. Make certain that the seat is locked securely in position.
5. Carefully and safely get out of the seat and stand to the side of your PMV.
6. You can leave the seat facing to the side to facilitate boarding your PMVnext time.
POWER DOWN TIMER FEATURE
Your PMV is equipped with an energy saving automatic power down timer feature designed to preserve your
PMV’s battery life. If you mistakenly leave the key in the key switch and in the “on” position but do not use your
PMVfor approximately 10 minutes, the PMV’s controller shuts down automatically.Although the controller is shut
down, power will still be supplied to the PMV’s lighting system.
If the power down timer feature takes effect, perform the following steps to resume normal operation.
1. Turn the key to the “off” (0) position.
2. Turn the key back to the “on” (1) position.
Mini Crosser
25
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I . C O M F O R T A D J U S T M E N T S
WARNING! Remove the key from the
key switch before adjusting the seat
or the tiller. Never attempt to adjust
the seat or the tiller while the PMV
is in motion.
SEATBACK ADJUSTMENT
LEVER
SEAT ROTATION
The seat rotation lever will lock the seat into sev-
eral positions.
1. Pull back on the seat rotation lever to unlock the
seat. See figure 15.
2. Rotate the seat to the desired position.
3. Release the lever to lock the seat into position.
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the seat forward or rearward
to adjust the distance between the seat and the
tiller. See figure 15.
1. Move the seat sliding lever outward and upward.
2. While holding the lever out, slide the seat forward
or rearward.
SEAT ROTATION LEVER
SEAT SLIDING LEVER
Figure 15. Seat Adjustments
3. Release the seat sliding lever once the seat is in the
desired position.
SEATBACK ADJUSTMENT
ADJUSTMENT DIAL
WARNING! Do not operate your PMV
with the seatback in a reclined
position.
WARNING! Always keep your back
pressed firmly against the seatback
while adjusting the angle.
To adjust the reclining seat, perform these steps. See
figure 15.
1. With your back pressed up against the seatback,
lift up on the seatback adjustment lever and lean
forward or rearward to adjust the seatback angle.
2. Release the seatback adjustment lever once the seat
is in a comfortable riding position.
Figure 15A. Armrest Angle Adjustment
ARMREST ANGLE ADJUSTMENT
The armrest angle can be adjusted upward or downward
byturningtheadjustmentdial.Seefigure15A.
NOTE: The armrests also pivot upward to make get-
ting on and off of your PMV easier.
Mini Crosser
26
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I . C O M F O R T A D J U S T M E N T S
SEAT HEIGHT ADJUSTMENT
You can change the seat height by adjusting the upper seat post up or down.
1. Turn the PMV off and place the manual freewheel lever in drive mode.
2. Lift the seat up and off of the seat post.
3. Remove the shroud release screw. See figure 16.
4. Pull the shroud towards the tiller then lift up to remove it. See figure 17.
5. Loosen the seat height adjustment bolts. See figure 18.
6. Slide the upper seat post up or down in the lower seat post.
WARNING! Do not extend the upper seat post from the lower seat post farther then the
HORIZONTAL groove that is marked on the upper seat post.
7. Tighten the seat height adjustment bolts.
8. Reinstalltheshroudandtightentheshroudreleasescrew.
9. Reinstall the seat.
SHROUD RELEASE SCREW
Figure 17. Rear Shroud Removal
Figure 16. Shroud Release Screw
LOWER SEAT POST
UPPER SEAT POST
SEAT HEIGHT
ADJUSTMENT
BOLTS
Figure 18. Seat Height Adjustment
Mini Crosser
27
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I . C O M F O R T A D J U S T M E N T S
TILLER HEIGHT ADJUSTMENT
The height if the tiller can be adjusted about 4-inches up
or down to allow for a more comfortable driving position.
1. Remove the rubber plug from the front of the tiller.
See figure 19.
RUBBER
PLUG
2. Insert a 4 mm hex key into the opening and loosen
the hex head screw.
3. Adjust the tiller up or down by pulling or pushing the
hand grips.
HEX HEAD
SCREW
4. Tighten the hex head screw and reinstall the rubber
plug.
TILLER ANGLE ADJUSTMENT
Your PMV is equipped with a pivoting tiller that allows
adjustment to several positions from its lowest position to
the farthest forward stop.
1. Pull down on the tiller adjustment lever. See figure 20.
2. Move the tiller to a comfortable position.
3. Release the tiller adjustment lever to secure the tiller
in position.
Figure 19.Tiller Height Adjustment
TILLER ADJUSTMENT
LEVER
#
Figure 20.Tiller Angle Adjustment
Mini Crosser
28
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I I . B A S I C T R O U B L E S H O O T I N G
Any electromechanical device occasionally requires some troubleshooting. However, most of the problems that
may arise can usually be solved with a bit of thought and common sense. Many of these problems occur because
the batteries are not fully charged or because the batteries are worn down and can no longer hold a charge.
DIAGNOSTIC FLASH CODES
The diagnostic flash codes for your PMV are designed to help you perform basic troubleshooting quickly and
easily.Adiagnostic flash code will flash from the status LED in the event one of the conditions listed below
develops.
NOTE: Your PMV will not run unless the flash code condition is resolved and the PMV has been
turned off, then turned back on.
FLASH CODE
CONDITION
SOLUTION
(1)
Battery voltage is too low to operate the Charge batteries or unplug the charger power lead from
!
PMV or the charger is operating.
Motor disconnected.
Motor wiring fault.
The PMV is operating with the charger Unplug the charger power lead from the charger port.
attached.
the electrical outlet.
Check all connections to the motor.
Call your authorized Pride Provider for assistance.
(2)
(3)
(6)
!!
!!!
!!!!!!
(7)
(8)
Throttle potentiometer fault.
Internal controller fault.
Call your authorized Pride Provider for assistance.
Call your authorized Pride Provider for assistance.
!!!!!!!
!!!!!!!!
(9)
Brake fault—your PMV was left in Turn the PMV key to the “off” position, then push the
!!!!!!!!!
freewheel mode.
manual freewheel lever to the (down) drive position,
and restart your PMV.
(10)
High battery voltage. The batteries have Leave the PMV turned on to drain the batteries to a
been overcharged and the PMV won’t sufficient level. If the batteries continue to overcharge,
!!!!!!!!!!
run.
call your authorized Pride Provider for assistance.
What if all the systems on my PMV seem to be “dead”?
! Make certain that the key is in the “on” position.
! Ensure the freewheel lever is in the drive position.
! Check that the batteries are fully charged.
! Make certain that all battery terminal connections are secured.
! Be sure the power down timer feature hasn’t been activated. See VI. “Operation.”
! Check all fuses.
Fuse Replacement
In the event a fuse should cease to work:
! Remove the fuse by pulling it out of its slot.
! Examine the fuse to be sure it is blown. See
figures 21 and 21A.
! Insert a new fuse of the proper rating.
Figure 21A. Blown Fuse (Replace)
Figure 21.Working Fuse
WARNING! The replacement fuse must exactly match the rating of the new fuse. Failure
to use properly rated fuses may cause damage to the electrical system and may result in
personal injury.
Mini Crosser
29
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I I . B A S I C T R O U B L E S H O O T I N G
What if my PMV does not move when I engage the throttle control lever?
! When the manual freewheel lever is pushed down, the brakes are disengaged and all power to the motor/
transaxle assembly is cut.
! Pull up on the manual freewheel lever, turn the PMVoff, and then turn the PMVon to return to normal PMV
operation.
What if the battery condition meter dips way down and the motor surges or hesitates when I engage my
PMV’s throttle control lever?
! Fully charge your PMV’s batteries. See V. “Batteries and Charging.”
! Have your authorized Pride Provider load test each battery.
If you experience any problems with your PMV that you are not able to solve, immediately contact your authorized
Pride Provider for information, maintenance, and service.
Mini Crosser
30
Download from Www.Somanuals.com. All Manuals Search And Download.
I X . C A R E A N D M A I N T E N A N C E
Your PMV requires a minimal amount of care and maintenance. If you do not feel confident in your ability to
perform the maintenance listed below, you may schedule inspection and maintenance at your authorized Pride
Provider. The following areas require periodic inspection and/or care and maintenance.
TIRE PRESSURE
! If equipped with pneumatic tires, always maintain a proper 50 psi tire pressure.
WARNING! It is important that 50 psi tire pressure be maintained in pneumatic tires at all
times. Do not underinflate or overinflate your tires. Low pressure may result in loss of
control, and overinflated tires may burst. Failure to maintain 50 psi tire pressure in
pneumatic tires at all times may result in tire and/or wheel failure, causing serious personal
injury and/or damage to your PMV.
! Regularly inspect your PMV’s tires for signs of wear.
EXTERIOR SURFACES
Bumpers, tires, trim, and the tiller boot can benefit from an occasional application of a rubber or vinyl conditioner.
WARNING! Do not use a rubber or vinyl conditioner on the PMV’s vinyl seat or tire tread. They
will become dangerously slippery and result in personal injury and/or damage to your PMV.
BATTERY TERMINAL CONNECTIONS
! Make certain that the terminal connections remain tight and uncorroded.
! The batteries must sit flat in the battery wells.
! The battery terminals should face the rear of the PMV.
WIRING HARNESSES
! Regularly check all wiring connections.
! Regularly check all wiring insulation, including the charger power cord, for wear or damage.
! Have your authorized Pride Provider repair or replace any damaged connector, connection, or insulation that
you find before using your PMV again.
ABS PLASTIC SHROUDS
! The front tiller shroud, front shroud, and the rear shroud are formed from durableABS plastic and are coated
with an advanced formula urethane paint.
! A light application of car wax will help the shrouds retain their high gloss.
AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY
These items are all prelubricated, sealed, and require no subsequent lubrication.
MOTOR BRUSHES
The motor brushes are housed inside of the motor transaxle/assembly. They should be inspected periodically for
wear by your authorized Pride Provider.
HANDBRAKE
The handbrake lever may require periodic adjustment to maintain proper operation. Contact your authorized Pride
Provider for more information.
Mini Crosser
31
Download from Www.Somanuals.com. All Manuals Search And Download.
I X . C A R E A N D M A I N T E N A N C E
CONSOLE, CHARGER, AND REAR ELECTRONICS
! Keep these areas free of moisture.
! Allow these areas to dry thoroughly if they have been exposed to moisture before operating your PMV again.
LIGHT BULB REPLACEMENT
The PMV’s light bulbs are easily replaceable. Do not use regular automotive-type 12-volt light bulbs; your PMV
is equipped with a 24-volt electrical system. Replacement light bulbs can be purchased from your authorized Pride
Provider.
NOTE: Use only 24-volt light bulbs.
! Remove the light cover.
! Gently remove the bulb by pulling it straight out.
! Insert a new bulb of the same wattage.
! Replace the light cover.
NYLON NUT REPLACEMENT
Any nylon insert lock nut removed during the periodic maintenance, assembly or disassembly of the PMV must be
replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon insert,
resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores or through
your authorized Pride Provider.
STORINGYOUR PMV
If you plan on not using your PMV for an extended period of time, it is best to:
! Fully charge its batteries prior to storage.
! Disconnect the batteries from the PMV.
! Store your PMV in a warm, dry environment.
! Avoid storing your PMVwhere it will be exposed to temperature extremes.
WARNING! Always protect batteries from freezing temperatures and never charge a frozen
battery. This damages the battery and can cause personal injury.
For prolonged storage, you may wish to place several boards under the frame of your PMV to raise it off of the
ground. This takes the weight off the tires and reduces the possibility of flat spots developing on the areas of the
tires contacting the ground.
Mini Crosser
32
Download from Www.Somanuals.com. All Manuals Search And Download.
I X . C A R E A N D M A I N T E N A N C E
TIRE/WHEEL REPLACEMENT
If you have pneumatic tires and have a flat, you can replace the tube. Replacement tires, tubes, and wheel assem-
blies are readily available through your authorized Pride Provider.
WARNING! To avoid possible injury, be sure the PMV’s power is off and the PMV is not in
freewheel mode before removing a wheel.
WARNING! Completely deflate the tire before attempting repair.
Front Wheel Removal/Replacement (3-wheel PMV)
1. Put blocks under the PMV to elevate it. This will keep the PMV from tipping when removing a wheel.
2. Remove the brake cable. See figure 22.
3. Remove the lower bolt that fastens the brake housing to the left side of the front fork. See figure 23.
4. The wheel can now be removed.
5. Remove the 5 screws that fasten the brake to the rim. See figure 24.
6. Ifchangingaflat, totallydeflatethetirebeforeremovingthefive(5)screwsthatholdtherimtogether. Seefigure25.
7. Remove and replace the old tube of the pneumatic tire.
8. Reassemble the brake to the rim and secure it with the five (5) screws.
9. Reassemble the rim and secure it together with the five (5) screws.
10. Reinstall the wheel back onto the PMV and tighten the lower bolt. See figure 23.
NOTE: When reinstalling the front wheel, ensure the top screw fits inside the slot on top of the brake
housing. See figure 26.
11. Reattach the brake cable. See figure 22.
12. Inflate to 50 psi.
Figure 23. Front Wheel Securement
Figure 22. Brake Cable
Figure 24. Brake Removal
Figure 26. FrontWheel Installation
Figure 25. Rim Securement
Mini Crosser
33
Download from Www.Somanuals.com. All Manuals Search And Download.
I X . C A R E A N D M A I N T E N A N C E
Front (4-wheel) and Rear (3-4 wheel) Wheel Removal/Replacement
1. Put blocks under the PMV to elevate it. This will keep the PMV from tipping when removing a wheel.
2. Remove the five (5) screws that fasten the wheel to the PMV. See figure 27.
3. Remove the wheel from the PMV.
4. If changing a flat, completely deflate the tire before removing the five (5) screws that hold the rim halves together.
See figure 28.
5. Remove and replace the old tube of the pneumatic tire.
6. Reassemble the rim and secure it with the five (5) screws.
7. Reinstall the wheel back onto the PMV and secure it with the five (5) screws.
8. Inflate to 50 psi.
NOTE: When remounting the wheel, mount the spring washers (not shown) between the wheel rim and
the screws.
Figure 27. Wheel Removal
Figure 28. Rim Securement
Mini Crosser
34
Download from Www.Somanuals.com. All Manuals Search And Download.
X . W A R R A N T Y
THREE-YEAR LIMITED WARRANTY
For three (3) years from the date of purchase, Pride will repair or replace at our option to the original purchaser,
free of charge, any of the following parts found upon examination by an authorized representative of Pride to be
defective in material and/or workmanship:
Structural frame components, including:
! Main Frame
! Fork
! Seat Post
! Tiller Frame
THREE-YEAR PRORATA WARRANTY
Three-year prorata drivetrain warranty, including:
! Transaxle
! Motor Brake (electronic function ONLY) ! Brake
These components will be prorated on the following schedule:
! First year: 100% replacement of parts cost
! Second year: 67% replacement of parts cost
! Third year: 50% replacement of parts cost
NOTE: If there is an increase in the operational noise level in the transaxle, the warranty does not
apply. An increase in operational noise level usually occurs due to abusive and excessive strain on the
PMV.
ONE-YEAR LIMITED WARRANTY
For one (1) year from the date of purchase, Pride will repair or replace at our option to the original purchaser, free
of charge, any of the following parts found upon examination by an authorized representative of Pride to be
defective in material and/or workmanship:
! Bearings
! Bushings
! Rubber Components
! Plastic components except body
Also, electronic assemblies including:
! Electronic Controllers
! Harnesses
! Chargers
! Any other electrical subassembly
SIX-MONTH WARRANTY
The battery is covered by a separate six-month warranty, provided by the battery manufacturer. The batteries are
not warranted by Pride.
RECONDITIONED UNITS WARRANTY
All reconditioned units are covered by a six-month warranty from Pride effective from the date of purchase.
WARRANTY EXCLUSIONS
This warranty does not extend to those items which may require replacement due to normal wear and tear.
! ABS Plastic shrouds
! Motor brushes
! Upholstery and seating
! Brake Pads
! Tires and tubes
! Fuses/Bulbs
Mini Crosser
35
Download from Www.Somanuals.com. All Manuals Search And Download.
X . W A R R A N T Y
! Circumstances beyond the control of Pride
! Labor, service calls, shipping, and other charges incurred for repair of the product, unless specifically autho-
rized, INADVANCE, by Pride Mobility Products Corporation
! Repairs and/or modifications made to any part without specific consent from Pride
Exclusions also include components with damage caused by:
! Contamination
! Abuse, misuse, accident, or negligence
! Battery fluid spillage or leakage
! Commercial use, or use other than normal
! Improper operation, maintenance, or storage
NOTE: Gradual deterioration in performance because the battery has been left in a discharged state, left
in cold conditions for an extended period of time, or worn out through heavy use is not covered.
SERVICE CHECKS AND WARRANTY SERVICE
Warranty service must be performed by an authorized Pride Provider. Do not return faulty parts to Pride without
priorwritten authorization.All transportation costs and shipping damage incurred while submitting parts for repair or
replacement are the responsibility of the purchaser. Please contact your authorized Pride Provider for information
on the current cost associated with a service visit.
There is no other express warranty.
IMPLIED WARRANTIES
Implied warranties, including those of merchantability and fitness for a particular purpose, are limited to one (1)
year from the date of original purchase and to the extent permitted by law.Any and all implied warranties are
excluded. This is the exclusive remedy. Liabilities for consequential damages under any and all warranties are
excluded.
Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion of
limitation of incidental or consequential damages. So, the above limitation or exclusion may not apply to you.
Mini Crosser
36
Download from Www.Somanuals.com. All Manuals Search And Download.
182 SusquehannaAve.
Exeter, PA 18643
1-800-800-8586
*I NFMANU3202*
Download from Www.Somanuals.com. All Manuals Search And Download.
|