Owner’s Manual
ATTENTION:
Please read the content
of your owner’s manual
before operating your
scooter.
Legend 3-Wheel Scooter
Legend 4-Wheel Scooter
The Ultimate In Style & Performance®
Exeter, PA
St. Catharines, ON
1-800-800-8586
Download from Www.Somanuals.com. All Manuals Search And Download.
C O N T E N T S
Iꢀ
INTRODUCTIONꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ 4
IIꢀ SAFETY ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ 6
IIIꢀ EMI/RFI ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ 15
IVꢀ SPECIFICATIONS ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ 17
Vꢀ YOUR LEGEND ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ 19
VIꢀ BATTERIES AND CHARGING ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ 23
VIIꢀ OPERATIONꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ 27
VIIIꢀCOMFORT ADJUSTMENTSꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ 29
IXꢀ DISASSEMBLY AND ASSEMBLY ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ 32
Xꢀ OPTIONAL ACCESSORIESꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ 35
XIꢀ BASIC TROUBLESHOOTING ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ 36
XIIꢀ CARE AND MAINTENANCE ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ 38
XIIIꢀ WARRANTY ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ 40
Legend
3
Download from Www.Somanuals.com. All Manuals Search And Download.
I . I N T R O D U C T I O N
Welcome to Pride Mobility Products Corporation (Pride)ꢀ Congratulations on the purchase of your new Pride
Scooterꢀ Your scooter design combines the most advanced state-of-the-art components with modern, attractive
stylingꢀ We are certain that the design features and trouble-free operation will add convenience to your daily living
and ensure complete satisfactionꢀ
At Pride, your safety is important to usꢀ Please read and follow all of the instructions in this manual before you
attempt to operate your scooter for the first timeꢀ These instructions were produced for your benefitꢀ Your under-
standing of these instructions is essential for the safe operation of your new Pride Scooterꢀ
Pride is not liable for damage to property or personal injury arising out of the unsafe use of a Pride Scooterꢀ Pride
is also not liable for any property damage or personal injury arising out of the failure of any person and/or user to
follow the instructions and recommendations set forth in this manual or any other instructions or recommendations
contained in other scooter related literature issued by Pride or contained on the Pride Scooter itselfꢀ
This owner’s manual is compiled from the latest specifications and product information available at the time of
publicationꢀ We reserve the right to make changes as they become necessaryꢀ Any changes to our products may
cause slight variations between the illustrations and explanations in this manual and the product you have purchasedꢀ
If you experience any problems with yourscooter that your are not able to solve, or if you do not feelcapable of safely
following any of the instructions and/or recommendations containedinthismanual, pleasecontactyourauthorized
Pride Provider for assistanceꢀ
Once you understand how to operate and take care of yourscooter,weare certain that it will give you years of trouble-
freeserviceandenjoymentꢀ
Information Exchange
Wewanttohearyourquestions, comments, andsuggestionsregardingthismanualꢀWewouldalsoliketohearaboutthe
safety and reliability of your new Pride Scooter,andthe service you received from your authorized Pride Providerꢀ
Please notify us of any change of address so we can keep you apprised of important information regarding safety, new
products, and new options that can increase your ability to use and enjoy your Pride ScooterꢀPleasefeelfreetowriteus
at the address below:
Pride Mobility Products Corporation
Attn: Customer Care Department
182 SusquehannaAvenue
Exeter, PA18643-2694
customercare@pridemobilityꢀcom
1-800-424-8205
4
Legend
Download from Www.Somanuals.com. All Manuals Search And Download.
I . I N T R O D U C T I O N
Pride Owners Club
As a Pride product owner, you are invited to register your product’s warranty and enroll in the Pride Owners Clubꢀ
You may do so by filling out and returning your enclosed registration card or by visiting Pride’s web site at
wwwꢀpridemobilityꢀcomꢀ As a registered member, each time you visit our site you will have access to the most
interactive and honest educational venue available today for people with mobility needs, their families, and friendsꢀ
From our home page, click on the button that reads “Owners Club” to enter a page dedicated to current and
potential Pride product ownersꢀ You will gain access to interviews, stories, recreation ideas, daily living tips,
product and funding information, and interactive message boardsꢀ Message boards invite you to speak with other
Pride customers as well as Pride representatives who are available to assist you with any questions or concerns
you may haveꢀ
My Authorized Pride Provider Is:
Name:_______________________________________________________________________________
Address:_____________________________________________________________________________
Phone Number:________________________________________________________________________
Quick Reference Information:
Scooter Model:________________________________________________________________________
Serial Number:__________________________________________________________________________
Purchase Date:________________________________________________________________________
NOTE:If you ever lose or misplace your product registration card or this owner’s manual, contact us and
we will be glad to send you a new one immediatelyꢀ
Legend
5
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
GENERAL
WARNING! Do not operate your new scooter for the first time without completely reading
and understanding this owner’s manualꢀ
Your Scooter is a state-of-the-art life-enhancement device designed to increase mobilityꢀ Pride provides an exten-
sive variety of products to best fit the individual needs of the scooter userꢀ Please be aware that the final selection
and purchasing decision regarding the type of scooter to be used is the responsibility of the scooter user who is
capable of making such a decision and his/her healthcare professional (iꢀeꢀ, medical doctor, physical therapist, etcꢀ)ꢀ
The contents of this manual are based on the expectation that a mobility device expert has properly fitted the
scooter to the user and has assisted the prescribing healthcare professional and/or the authorized Pride Provider in
the instruction process for the use of the productꢀ
There are certain situations, including some medical conditions, where the scooter user will need to practice
operating the scooter in the presence of a trained attendantꢀAtrained attendant can be defined as a family member
or care professional specially trained in assisting a scooter user in various daily living activitiesꢀ
As you begin using your scooter during daily activities, you will probably encounter situations in which you will
need some practiceꢀ Simply take your time and you will soon be in full and confident control as you maneuver
through doorways, on and off lifts, up and down ramps, and over moderate terrainꢀ
Below are some precautions, tips, and other safety considerations that will help the user become accustomed to
operating the scooter safelyꢀ
MODIFICATIONS
Pride has designed and engineered your scooter to provide maximum mobility and utilityꢀAwide range of acces-
sories is available from your authorized Pride Provider to further customize your scooter to better suit your needs
and/or preferencesꢀ However, under no circumstances should you modify, add, remove, or disable any feature,
part, or function of your scooterꢀ
WARNING! Do not modify your scooter in any way not authorized by Prideꢀ Unauthorized
modifications may result in personal injury and/or damage to your scooterꢀ
REMOVABLE PARTS
WARNING! Do not attempt to lift or move your scooter by any of its removable partsꢀ
Personal injury and damage to the scooter may resultꢀ
ELECTROMAGNETIC FIELDS
Your scooter’s road performance features may be influenced by electromagnetic fields caused by cellular tele-
phones or other radiating devices, such as hand-held radios, radio and television stations, wireless computer links,
microwave sources, and paging transmittersꢀ Learn more about this topic in IIIꢀ “ EMI-RFIꢀ”
6
Legend
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
PRE-RIDE SAFETY CHECK
Get to know the feel of your scooter and its capabilitiesꢀ Pride recommends that you perform a safety check before
each use to make sure your scooter operates smoothly and safelyꢀ For details on how to perform these necessary
inspections, see XIIꢀ “Care and Maintenanceꢀ”
Perform the following inspections prior to using your scooter:
n Check for proper tire inflation (if equipped with pneumatic tires)ꢀ
n Check all electrical connectionsꢀ Make sure they are tight and not corrodedꢀ
n Check all harness connectionsꢀ Make sure they are secured properlyꢀ
n Check the brakesꢀ
n Check battery chargeꢀ
If you discover a problem, contact your authorized Pride Provider for assistanceꢀ
TIRE INFLATION
If your scooter is equipped with pneumatic tires, you should check or have the air pressure checked at least once
a weekꢀ Proper inflation pressures will prolong the life of your tires and help ensure the smooth operation of your
scooterꢀ
WARNING! It is critically important that 30-35 psi tire pressure be maintained in pneumatic
tires at all timesꢀ Do not underinflate or overinflate your tiresꢀ Low pressure may result in
loss of control, and overinflated tires may burstꢀ Failure to maintain 30-35 psi tire pressure
in pneumatic tires at all times may result in tire and/or wheel failure, causing serious
personal injury and/or damage to your scooterꢀ
WARNING! Inflate your scooter tires from a regulated air source with an available pressure
gaugeꢀ Inflating your tires from an unregulated air source could overinflate them, resulting
in a burst tire and/or personal injuryꢀ
WEIGHT LIMITATIONS
Your scooter is rated for a maximum weight capacityꢀ Refer to the specifications table for informationꢀ
WARNING! Exceeding the weight capacity voids your warranty and may result in personal
injury and damage to your scooterꢀ Pride will not be held responsible for injuries and/or
property damage resulting from failure to observe weight limitationsꢀ
WARNING! Do not carry passengers on your scooterꢀ Carrying passengers may result in
personal injury and/or property damageꢀ
INCLINE INFORMATION
More and more buildings have ramps with specified degrees of inclination, designed for easy and safe accessꢀ
Some ramps may have turning switchbacks (180-degree turns) that require you to have good cornering skills on
your scooterꢀ
n Proceed with extreme caution as you approach the downgrade of a ramp or other inclineꢀ
n Take wide swings with your scooter around any tight cornersꢀ If you do that, the scooter’s rear wheels will
follow a wide arc, not cut the corner short, and not bump into or get hung up on any railing cornersꢀ
n When driving down a ramp, keep the scooter’s speed adjustment set to the slowest speed setting to ensure a
safely controlled descentꢀ
n Avoid sudden stops and startsꢀ
Legend
7
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
When climbing an incline, try to keep your scooter movingꢀ If you must stop, start up again slowly, and then
accelerate cautiouslyꢀ When driving down an incline, do so by setting the speed adjustment dial to the slowest
setting and driving in the forward direction onlyꢀ If your scooter starts to move down the incline faster than you
anticipated or desired, allow it to come to a complete stop by releasing the throttle control leverꢀ Then push the
throttle control lever forward slightly to ensure a safely controlled descentꢀ
WARNING! When climbing an incline, do not zigzag or drive at an angle up the face of the
inclineꢀ Drive your scooter straight up the inclineꢀ This greatly reduces the possibility of a
tip or a fallꢀ Always exercise extreme caution when negotiating an inclineꢀ
WARNING! Do not drive your scooter across the side of a hill or diagonally up or down a
hill; do not stop, if possible, while driving up or down an inclineꢀ
WARNING! You should not travel up or down a potentially hazardous incline (iꢀeꢀ, areas
covered with snow, ice, cut grass, or wet leaves)ꢀ
WARNING! When on any sort of an incline or decline, never place the scooter in freewheel
mode while seated on it or standing next to itꢀ
WARNING! Even though your scooter is capable of climbing slopes greater than those
illustrated in figures 1 and 1A, do not, under any circumstances, exceed the incline
guidelines or any other specifications presented in this manualꢀ Doing so could cause
instability in your scooter, resulting in personal injury and/or damage to your scooterꢀ
Handicap public access ramps are not subject to government regulation in all countries, and therefore do not
necessarily share the same standard percent of slopeꢀ Other inclines may be natural or, if man-made, not designed
specifically for scootersꢀ Figures 1 and 1Aillustrate your scooter’s stability and its ability to climb grades under
various weight loads and under controlled testing conditionsꢀ
These tests were conducted with the scooter’s seat in the highest position and adjusted rearward on the seat base
to its farthest rearward positionꢀ Use this information as a guidelineꢀYour scooter’s ability to travel up inclines is
affected by your weight, your scooter’s speed, your angle of approach to the incline, and your scooter setupꢀ
150 lbs. 200 lbs. 250 lbs. 300-350 lbs.
150 lbs. 200 lbs. 250 lbs. 300-350 lbs.
6˚
5˚
8˚
7˚
7˚
6˚
9˚
8˚
Figure 1. (3-wheel) Maximum Recommended
Incline Angles
Figure 1A. (4-wheel) Maximum Recommended
Incline Angles
WARNING! Any attempt to climb or descend a slope steeper than what is shown in figures
1 and 1A may put your scooter in an unstable position and cause it to tip, resulting in
personal injuryꢀ
WARNING! Never carry an oxygen tank weighing more than 15 lbsꢀ Never fill the rear
basket with contents exceeding 15 lbsꢀ
8
Legend
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
When you approach an incline, it is best to lean forwardꢀ See figures 2 and 2Aꢀ This shifts the center of gravity of
you and your scooter toward the front of the scooter for improved stabilityꢀ
Figure 2A. Increased Stability Driving Position
Figure 2. Normal Driving Position
CORNERING INFORMATION
Excessively high cornering speeds can create the possibility of tippingꢀ Factors which affect the possibility of
tipping include, but are not limited to, cornering speed, steering angle (how sharply you are turning), uneven road
surfaces, inclined road surfaces, riding from an area of low traction to an area of high traction (such as passing from
a grassy area to a paved area – especially at high speed while turning), and abrupt directional changesꢀ High
cornering speeds are not recommendedꢀ If you feel that you may tip over in a corner, reduce your speed and
steering angle (iꢀeꢀ, lessen the sharpness of the turn) to prevent your scooter from tippingꢀ
WARNING! When cornering sharply, reduce your speedꢀ When using your scooter at higher
speeds, do not corner sharplyꢀ This greatly reduces the possibility of a tip or fallꢀ To avoid
personal injury or property damage, always exercise common sense when corneringꢀ
BRAKING INFORMATION
Your scooter is equipped with two powerful brake systems:
1ꢀ Regenerative: Uses electricity to rapidly slow the vehicle when the throttle control lever returns to the center/
stop positionꢀ
2ꢀ Disc Park Brake:Activates mechanically after regenerative braking slows the vehicle to near stop, or when
power is removed from the system for any reasonꢀ
Legend
9
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
OUTDOOR DRIVING SURFACES
Your scooter is designed to provide optimum stability under normal driving conditions—dry, level surfaces com-
posed of concrete, blacktop, or asphaltꢀ However, Pride recognizes that there will be times when you will encoun-
ter other surface typesꢀ For this reason, your scooter is designed to perform admirably on packed soil, grass, and
gravelꢀ Feel free to use your scooter safely on lawns and in park areasꢀ
n Reduce your scooter’s speed when driving on uneven terrain and/or soft surfacesꢀ
n Avoid tall grass that can become tangled in the running gearꢀ
n Avoid loosely packed gravel and sandꢀ
n If you feel unsure about a driving surface, avoid that surfaceꢀ
STREETS AND ROADWAYS
WARNING! You should not operate your scooter on public streets and roadwaysꢀ Be aware
that it may be difficult for traffic to see you when you are seated on your scooterꢀ Obey all
local pedestrian traffic rulesꢀ Wait until your path is clear of traffic, and then proceed with
extreme cautionꢀ
NOTE: Safety accessories like fluorescent flags are available to order from your authorized Pride Providerꢀ
STATIONARY OBSTACLES (STEPS, CURBS, ETC.)
WARNING! Do not drive near raised surfaces, unprotected ledges, and/or drop-offs (curbs,
porches, stairs, etcꢀ)ꢀ
WARNING! Do not attempt to have your scooter climb or descend an obstacle that is
inordinately highꢀ Serious personal injury and/or damage may resultꢀ
WARNING! Do not attempt to have your scooter proceed backward down any step, curb, or
other obstacleꢀ This may cause the scooter to tip and cause personal injuryꢀ
WARNING! Be sure your scooter is traveling perpendicular to any curb you may be required
to ascend or descendꢀ See figures 3 and 3Aꢀ
WARNING! Do not attempt to negotiate a curb that has a height greater than 2 inꢀ
Figure 3. Correct Curb Approach
Figure 3A. Incorrect Curb Approach
10
Legend
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
INCLEMENT WEATHER PRECAUTIONS
WARNING! Pride recommends that you do not operate your scooter in icy or slippery
conditions or on salted surfaces (iꢀeꢀ, walks or roads)ꢀ Such use may result in an accident,
personal injury, or adversely affect the performance and safety of your scooterꢀ
WARNING! Do not operate or store your scooter where it may be exposed to inclement
weather conditions such as rain, snow, mist, and below freezing temperatures (such as
storage on an outside car/van lift)ꢀ Attempting to operate the scooter in such conditions
can damage the electronics and potentially result in loss of controlꢀ
FREEWHEEL MODE
Your scooter is equipped with a manual freewheel leverthat, when pulled up, allowsthe scooter to be pushedꢀ For
more information about how to place your scooter into and out of freewheel mode, see Vꢀ “Your Legendꢀ”
WARNING! When your scooter is in freewheel mode, the braking system is disengagedꢀ
n Disengage the drive motors only on a level surfaceꢀ
n Ensure the key is removed from the key switchꢀ
n Stand behind the scooter to engage or disengage freewheel modeꢀ Never sit on a
scooter to do thisꢀ
n After you have finished pushing your scooter, always return it to the drive mode to lock
the brakesꢀ
Failure to heed the above could result in personal injury and/or damage to your scooterꢀ
An added feature built into the Legend is “push-too-fast” protection which safeguards the scooter against gaining
excessive speed while in freewheel modeꢀ
“Push-too-fast” operates differently depending on which of two conditions exists:
n If the key is switched “off” while in freewheel mode, the scooter’s controller activates regenerative braking
when the scooter is pushed faster than a maximum threshold which has been preprogrammedꢀ In this case, the
controller is acting as a speed governorꢀ
n If the key is switched “on” while in freewheel mode, you will encounter considerable resistance at any speedꢀ
This prevents the scooter from gaining unwanted momentum should the manual freewheel lever inadvertently
be released while driving the scooterꢀ
Legend
11
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
STAIRS AND ESCALATORS
Scooters are not designed to travel up or down stairs or escalatorsꢀ Always use an elevatorꢀ
WARNING! Do not use your scooter to negotiate steps or escalatorsꢀ You may cause injury
to yourself and to others and/or damage your scooterꢀ
DOORS
n Determine if the door opens toward or away from youꢀ
n Use your hand to turn the knob or push the handle or push-barꢀ
n Drive your scooter gently and slowly forward to push the door openꢀ Or drive your scooter gently and slowly
rearwards to pull the door openꢀ
ELEVATORS
Modern elevators have a door edge safety mechanism that, when pushed, reopens the door(s)ꢀ
n If you are in the doorway of a elevator when the door(s) begin to close, push on the rubber door edge or allow
the rubber door edge to contact the scooter and the door will reopenꢀ
n Use care that pocketbooks, packages, or scooter accessories do not become caught in elevator doorsꢀ
LIFT/ELEVATION PRODUCTS
If you will be traveling with your scooter, you may find it necessary to use a lift/elevation product to aid in transpor-
tationꢀ Pride recommends that you closely review the instructions, specifications, and safety information set forth
by the manufacturer of the lift/elevation product before using that productꢀ
WARNING! Never sit on your scooter when it is being used in connection with any type of
lift/elevation productꢀ Your scooter was not designed with such use in mind, and any
damage or injury incurred from such use is not the responsibility of Prideꢀ
BATTERIES
In addition to following the warnings below, be sure to comply with all other battery handling informationꢀ
WARNING! Scooter batteries are heavy (refer to specifications table)ꢀ Lifting weight
beyond your capacity could result in personal injuryꢀ If necessary, get someone physically
able to lift the scooter’s batteries for youꢀ
WARNING! Battery posts, terminals, and related accessories contain lead and lead
compoundsꢀ Wash hands after handlingꢀ
WARNING! Always protect the batteries from freezing and never charge a frozen batteryꢀ
Charging a frozen battery may result in personal injury and/or damage to the batteryꢀ
WARNING! RED (+) cables must be connected to positive (+) battery terminals/postsꢀ BLACK
(-) cables must be connected to negative (-) battery terminals/postsꢀ Failure to connect
your battery harnesses in the proper manner may result in personal injury and/or damage
to your scooterꢀ REPLACE cables immediately if damagedꢀ
BATTERY DISPOSAL AND RECYCLING
If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag and call your authorized
Pride Provider for instructions on disposalꢀ Your authorized Pride Provider will also have the necessary informa-
tion on battery recycling, which is our recommended course of actionꢀ
12
Legend
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
MOTOR VEHICLE TRANSPORT
Currently, there are no standards approved for tie-down systems in a moving vehicle of any type to transport a
person while seated in a scooterꢀ
Although your scooter may be equipped with a positioning belt, this belt is not designed to provide proper restraint
during motor vehicle transportꢀAnyone traveling in a motor vehicle should be properly secured in the motor vehicle
seat with safety belts fastened securelyꢀ
WARNING! Do not sit on your scooter while it is in a moving vehicleꢀ Personal injury and/or
property damage may resultꢀ
WARNING! Always be sure your scooter and its batteries are properly secured when it is
being transportedꢀ Failure to do so may result in personal injury and/or damage to your
scooterꢀ
PREVENTING UNINTENDED MOVEMENT
WARNING! If you anticipate being seated in a stationary position for an extended period
of time, turn off the powerꢀ This will prevent unexpected motion from inadvertent throttle
control lever contactꢀ Failure to do so may result in personal injuryꢀ
GETTING ONTO AND OFF OF YOUR SCOOTER
Getting onto and off of your scooter requires a good sense of balanceꢀ Please observe the following safety tips
when getting onto and off of your scooter:
n Ensure that your scooter is not in freewheel modeꢀ SeeVꢀ “Your Legendꢀ”
n Make certain that the seat is locked into place and the key is removed from the key switchꢀ
n The seat armrests of the seat can be flipped up to make getting onto and off of the scooter easierꢀ
WARNING! Position yourself as far back as possible in the scooter seat to prevent the
scooter from tipping and causing injuryꢀ
WARNING! Avoid using your armrests for weight bearing purposesꢀ Such use may cause
the scooter to tip and cause personal injuryꢀ
WARNING! Avoid putting all of your weight on the floorboardꢀ Such use may cause the
scooter to tip and cause personal injuryꢀ
REACHING AND BENDING
Avoid reaching or bending while driving your scooterꢀ When reaching, bending, or leaning while seated on your
scooter, it is important to maintain a stable center of gravity and keep the scooter from tippingꢀ Pride recommends
that the scooter user determine his/her personal limitations and practice bending and reaching in the presence of a
qualified healthcare professionalꢀ
WARNING! Do not bend, lean, or reach for objects if you have to pick them up from the
floor by reaching down between your kneesꢀ Movements such as these may change your
center of gravity and the weight distribution of the scooter and cause your scooter to tip,
possibly resulting in personal injuryꢀ Keep your hands away from the tires when drivingꢀ
Legend
13
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
POSITIONING BELTS
Your authorized Pride Provider, therapist(s), and other healthcare professionals are responsible for determining
your requirement for a positioning belt in order to operate your scooter safelyꢀ
WARNING! If you require a positioning belt to safely operate your scooter, make sure it is
fastened securelyꢀ Serious personal injury may result if you fall from the scooterꢀ
PRESCRIPTION DRUGS/PHYSICAL LIMITATIONS
The scooter user must exercise care and common sense when operating his/her scooterꢀThis includes awareness of
safety issues when taking prescribed or over-the-counter drugs or when the user has specific physical limitationsꢀ
WARNING! Consult your physician if you are taking prescribed or over-the-counter
medication or if you have certain physical limitationsꢀ Some medications and limitations
may impair your ability to operate your scooter in a safe mannerꢀ
ALCOHOL
The scooter user must exercise care and common sense when operating his/her scooterꢀ This includes awareness
of safety issues while under the influence of alcoholꢀ
WARNING! Do not operate your scooter while you are under the influence of alcohol, as
this may impair your ability to drive safelyꢀ
14
Legend
Download from Www.Somanuals.com. All Manuals Search And Download.
I I I . E M I / R F I
EMI/RFI WARNINGS
Laboratory tests performed by the Food and DrugAdministration (FDA) have shown that radio waves can cause
unintended motion of electric mobility vehiclesꢀ Radio waves are a form of electromagnetic energy (EM)ꢀ When
electromagnetic energy adversely affects the operation of an electrical device, that adverse effect is called Electro-
magnetic Interference (EMI) or Radio Frequency Interference (RFI)ꢀ
EMI/RFI FREQUENTLY ASKED QUESTIONS (FAQS)
The following FAQs summarize what you should know about EMI/RFIꢀ Use this information to minimize the risk
that EMI/RFI will adversely affect your mobility vehicleꢀ
Where do radio waves come from?
Radio waves are emitted from the antennas of cellular phones, mobile two-way radios (such as walkie-talkies and
CBs), radio stations, TV stations, amateur radio (HAM) transmitters, wireless computer links, microwave sources,
and paging transmittersꢀ Radio waves are a form of electromagnetic energy (EM)ꢀ EM is more intense closer to
transmitting antennas, which are sources of emissionꢀ The greater the transmission strength, the greater the concern
to electric mobility vehicle usersꢀ
If EMI/RFI affects my mobility vehicle, what kind of motion should I expect?
This is difficult to predictꢀ The answer would depend on a number of factors:
n The strength of the radio wavesꢀ
n The construction of your particular mobility vehicleꢀ
n The location of your mobility vehicle (whether it is on level ground or on an incline)ꢀ
n Whether or not your mobility vehicle is in motionꢀ
The motion of any electric mobility vehicle affected by EMI/RFI can be erraticꢀ The mobility vehicle may come to
a sudden stop or move in an uncontrolled mannerꢀAlso, it is possible for EMI/RFI to release the brakes of an
electric mobility vehicleꢀ Some intense EMI/RFI can even damage the control system components of an electric
mobilityvehicleꢀ
Is there any way to know for certain whether or not radio waves are the cause of any unintended
mobility vehicle motion?
Unfortunately, EMI/RFI may be difficult to recognize, because the signals from radio sources are invisible and may
be intermittentꢀ However, the FDArecommends that you report all incidents of unintended motion or unintended
brake release of your mobility vehicle to its manufacturer and, if possible, determine whether or not there was a
radio wave source nearby at the time of the incidentꢀ
One precaution you can take against unintended motion of your mobility vehicle is to make certain that you or
someone else is not the cause of the unintended motionꢀ
n Turn off your mobility vehicle by removing the key from the key switch when you are getting onto or off of your
mobilityvehicleꢀ
n Never leave the key in the key switch of an unattended mobility vehicleꢀ
n By following these steps, you greatly reduce the risk of you or anyone else inadvertently bumping the throttle
control levers and causing the mobility vehicle to move unintentionallyꢀ
Has anyone been injured by the erratic, unintended motion of an electric mobility vehicle?
The FDA has reports of injuries that resulted from uncontrolled motion of electric mobility vehicles, but it is not
clear just how many of those injuries were actually caused by EMI/RFIꢀ
Legend
15
Download from Www.Somanuals.com. All Manuals Search And Download.
I I I . E M I / R F I
Are all electric mobility vehicles susceptible to EMI/RFI?
Each make and model of electric mobility vehicle differs in its ability to resist EMI/RFIꢀ Every mobility vehicle has
a particular level of resistance to EMI/RFIꢀ This resistance is measured in volts per meter (V/m)ꢀAhigher resis-
tance level offers greater protection against EMI/RFIꢀ In other words, an electric mobility vehicle with a high
resistance level is less likely to be affected by a strong radio source than is an electric mobility vehicle with a low
resistance levelꢀ
What is the FDA doing about the problem?
The FDA has written to electric mobility vehicle manufacturers and requested that those manufacturers test their
new mobility vehicle models to be certain that they provide a reasonable degree of resistance against EMI/RFIꢀ
The FDA has stated that all newly manufactured electric mobility vehicle models should have a resistance level of
at least 20 V/mꢀ This level of resistance provides a reasonable degree of protection against the common sources of
EMI/RFIꢀ
The FDA has also requested or recommended that:
n Electric mobility vehicle manufacturers clearly label new products with their resistance level or state that the
resistance level is not knownꢀ
n The labeling or informational material supplied with new electric mobility vehicles must explain what the resis-
tance level means and warn users about the possibility of EMI/RFI and how to avoid itꢀ
n Electric mobility vehicle manufacturers undertake an educational program to inform electric mobility vehicle
users and their caregivers about the problems associated with EMI/RFI and about the actions they can take to
minimize the risk of EMI/RFIꢀ
n While there is no exact way to tell if your mobility vehicle is totally safe, an immunity level of 20 V/m is generally
achievable and usefulꢀ This scooterhas been tested and passed at an immunity level of 20V/mꢀ
What can I do to find out if my mobility vehicle is likely to be affected by EMI/RFI?
If you have had your mobility vehicle for some time and have not experienced any unintended motion, it is not likely
that you will have a problem in the futureꢀ However, it is always possible that EMI/RFI problems could arise if you
are close to a source of radio wavesꢀ Therefore, it is very important for you to be alert to this possibilityꢀ The
mobility vehicle meets or exceeds a resistance level of at least 20 V/mꢀ
What can I do to reduce the risk of my mobility vehicle being affected by EMI/RFI?
Here are some precautions you can take:
n Do not turn on or use hand-held personal communications devices, such as citizens band (CB) radios and
cellular phones, while your mobility vehicle is turned onꢀ
n Be aware of nearby radio wave transmitters, such as radio or TV stations and hand-held or mobile two-way
radiosꢀ Try not to operate your mobility vehicle too close to those transmittersꢀ For example, if you are on an
electric mobility vehicle with a resistance level of at least 20 V/m, you should remain at least three feet from a
hand-held two-way radio and at least ten feet from a mobile two-way radioꢀ
n Be aware that adding accessories and/or components, or modifying your mobility vehicle in any way, may
change its EMI/RFI resistance level and may make it more susceptible to interference from radio wave sourcesꢀ
What should I do if my mobility vehicle moves unexpectedly?
If unintended motion or unintended brake release occurs, turn off your mobility vehicle (by removing the key) as
soon as it is safe to do soꢀ
If my mobility vehicle moves unintentionally, where should I report the incident?
Call the Pride Customer Care at 1-800-424-8205 to report the incidentꢀ
16
Legend
Download from Www.Somanuals.com. All Manuals Search And Download.
I V . S P E C I F I C A T I O N S
20"
17" - 21"
3.5"
3-wheel 45.5" Length
4-wheel 47"
18"
20"
24"
3-wheel 41"
4-wheel 58"
Turning Radius
Figure 4. Legend Dimensions
24"
3.5"
4"
10"
10"
Figure 4A. Legend Front Tire Dimensions
Figure 4B. Legend Rear Tire Dimensions
Legend
17
Download from Www.Somanuals.com. All Manuals Search And Download.
I V . S P E C I F I C A T I O N S
Model Numbers
Available Colors
Overall Length
Overall Width
3-wheel:SC3000 , 4-wheel:SC3400
Painted: Champagne (Standard)**
3-wheel: 45ꢀ5 inꢀ, 4-wheel: 47 inꢀ
24 inꢀ
Total Weight Without Batteries
Heaviest Piece When Disassembled
Turning Radius
3-wheel: 157 lbsꢀ, 4-wheel: 166 lbsꢀ
Rear frame: 61 lbsꢀ
3-wheel: 41 inꢀ, 4-wheel: 58 inꢀ
Variable up to 5ꢀ75 mph
Speed (max)
Range Per Charge*
Ground Clearance
(With 32AH batteries) Up to 25 miles
3ꢀ5 inꢀ
Weight Capacity
350 lbsꢀ
Standard Seating
Type: CRS Deluxe Reclining High Back with headrest
and slidersꢀ Dimensions: 18 inꢀ (usable) width x 18 inꢀ
depth (usable) x 20 inꢀ height; with headrest 24 inꢀ – 28 inꢀ
(usable) Material: Gray vinyl or Gray fabric
45 lbsꢀ
Standard Seat Weight
Drive System
Rear-wheel drive, sealed transaxle with a 24-volt DC
motor
Dual Braking System
Wheels
Electronic, regenerative, and electromechanical
Aluminum alloy mags
Tires
Type: pneumatic; front: 3ꢀ5 inꢀ x 10 inꢀ, rear: 4 inꢀ x 10 inꢀ
Two 12-volt deep cycle (AGM, or Gel Cell) Size: U-1,
32AH
Battery Requirements
Battery Weight
Battery Charger
Warranty
24ꢀ5 lbsꢀ each
On-board 3-amp charger
3-year limited
** Other colors available through special orderꢀ
* Varies with user weight, terrain type, battery charge, battery condition, and tire conditionꢀ
18
Legend
Download from Www.Somanuals.com. All Manuals Search And Download.
V . Y O U R L E G E N D
TILLER CONSOLE
The tiller console houses all of the controls needed to drive your scooterꢀ See figure 5ꢀ
WARNING! Do not expose the tiller console to moistureꢀ In the event that the tiller console
does become exposed to moisture, do not attempt to operate your scooter until the tiller
console has dried thoroughlyꢀ
BATTERY CONDITION METER
SPEED ADJUSTMENT DIAL
HAZARD LIGHT SWITCH
HORN BUTTON
STATUS LED
KEY SWITCH
RUNNING LIGHTS SWITCH
HORN BUTTON
TURN SIGNAL BUTTON (LEFT)
TURN SIGNAL BUTTON (RIGHT)
THROTTLE CONTROL LEVER
(FORWARD)
HEADLIGHT SWITCH
THROTTLE CONTROL LEVER
(REVERSE)
Figure 5. Tiller Console
Key Switch
n Insert the key into the key switch and turn it clockwise topower up (turn on) your scooterꢀ
n Turn the key counterclockwisetopower down (turn off) your scooterꢀ
WARNING! If the key is turned to the off position while your scooter is in motion, the
electronic brakes engage and your scooter will come to an abrupt stop!
Throttle Control Levers
These levers allow you to control the forward speed and the reverse speed of your scooter up to the maximum
speed you preset with the speed adjustment dialꢀ
n Place your right hand on the right handgrip and your left hand on the left handgripꢀ
n Use your right thumb to push the right side of the lever to disengage your scooter’s brakes and move forwardꢀ
n Release the lever and allow your scooter to come to a complete stop before pushing the other side of the lever
to move in reverseꢀ
n When the throttle is completely released, it automatically returns to the center “stop” position and engages your
scooter’s brakesꢀ
Speed Adjustment Dial
This dial allows you to preselect and limit your scooter’s top speedꢀ
n The image of the tortoise represents the slowest speed settingꢀ
n The image of the hare represents the fastest speed settingꢀ
Status LED
The Status LED alerts you to electrical problems that may occur with the Legendꢀ The LED remains constantly lit
while your scooter is onꢀ If the Legend develops an electrical problem, the status LED will flash a codeꢀ See XIꢀ
“BasicTroubleshooting” for diagnostic flash codesꢀ
Legend
19
Download from Www.Somanuals.com. All Manuals Search And Download.
V . Y O U R L E G E N D
Running Lights Switch
This switch controls your scooter’s front (upper) and rear running lightsꢀ
n Toggle the switch forward to turn on your scooter’s running lightsꢀ
n Toggle the switch back to turn off your scooter’s running lightsꢀ
Headlight Switch
This switch controls your scooter’s front (lower) lightꢀ
n Toggle the switch forward to turn on your scooter’s front lower lightꢀ
n Toggle the switch back to turn off the lightꢀ
Horn Button
Your scooter must be turned on for the horn to be operationalꢀ
n This button activates a warning hornꢀ
n Do not hesitate to use the warning horn when doing so may prevent accident or injuryꢀ
Hazard Lights Switch
This switch activates the 4-way flashers on your scooterꢀ
n Toggle the switch forward to turn on the flashersꢀ
n Toggle the switch back to turn off the flashersꢀ
Turn Signal Buttons
n Press the appropriate turn signal button once to activate itꢀ
n Your scooter’s turn signals are timed to shut off automaticallyꢀ
3-Amp Tiller Console Fuses
These fuses help protect your scooter’s front lighting, turn signals, and key switch console systems from receiving
an overload of electrical currentꢀ The fuses used in your scooter are the same type used in automobilesꢀ See XIIꢀ
“Care and Maintenance” for fuse replacementꢀ
3-AMP KEY SWITCH FUSE
3-AMP LOWER LIGHT FUSE
3-AMP RIGHT TURN SIGNAL FUSE
3-AMP LEFT TURN SIGNAL FUSE
SPARE
Figure 5A. Tiller Console Fuses
20
Legend
Download from Www.Somanuals.com. All Manuals Search And Download.
V . Y O U R L E G E N D
REAR SECTION
The onboard battery charger (not shown), the charger power cord receptacle, the batteries (not shown), the main
circuit breaker reset button, the ammeter, the manual freewheel lever, the anti-tip wheels, and the motor/transaxle
assembly are located on the rear section of your Legendꢀ See figure 6ꢀ
5-AMP CHARGER FUSE
5-AMP SPARE FUSE
3-AMP REAR LIGHTS FUSE
3-AMP REAR TURN SIGNALS FUSE
CHARGER POWER CORD RECEPTACLE
MANUAL FREEWHEEL LEVER
AMMETER
MAIN CIRCUIT BREAKER
(RESET BUTTON)
MOTOR/TRANSAXLE
ASSEMBLY
ANTI-TIP WHEEL
ANTI-TIP WHEEL
Figure 6. Rear Section
Charger Power Cord Receptacle
The charger power cord plugs into your Legend’s battery charger by means of the charger power cord receptacleꢀ
Ammeter
During charging, the ammeter indicates the charging rate, or how hard the charger is working to charge the Legend’s
batteriesꢀ See VIꢀ “Batteries and Chargingꢀ”
Main Circuit Breaker (Reset Button)
When the voltage in your Legend’s batteries becomes low or the scooter is heavily strained because of excessive
loads or steep inclines, the main circuit breaker may trip to protect the motor and electronics from damageꢀ See
figure6ꢀ
n The main circuit breaker reset button pops out when the breaker tripsꢀ
n When the breaker trips, the entire electrical system of your scooter shuts downꢀ
n Allow a minute or two for your Legend’s electronics to “restꢀ”
n Push in the reset button to reset the main circuit breakerꢀ
n If the main circuit breaker trips frequently, you may need to charge your batteries more oftenꢀYou may also
need to have your authorized Pride Provider perform a load test on your Legend’s batteriesꢀ
n If the main circuit breaker trips repeatedly, see your authorized Pride Provider for serviceꢀ
Legend
21
Download from Www.Somanuals.com. All Manuals Search And Download.
V . Y O U R L E G E N D
Manual Freewheel Lever
Whenever you need or want to push your scooter for short distances, you can put it in freewheel modeꢀ
n The manual freewheel lever is located on the end of the motor/transaxle assembly at the right rear of the
Legendꢀ See figure 6ꢀ
n Remove the key from the key switchꢀ
n Pull up on the manual freewheel lever to disable the drive system and the brake systemꢀ
n You may now push your Legendꢀ
n Push down on themanualfreewheellevertoreengagethe drive and the brake systems and take your scooter out
of freewheel modeꢀ
WARNING! When your scooter is in freewheel mode, the braking system is disengagedꢀ
n Disengage the drive motors only on a level surfaceꢀ
n Ensure the key is removed from the key switchꢀ
n Stand behind the scooter to engage or disengage freewheel modeꢀ Never sit on a
scooter to do thisꢀ
n After you have finished pushing your scooter, always return it to the drive mode to lock
the brakesꢀ
Failure to heed the above could result in personal injury and/or damage to your scooterꢀ
NOTE: If the scooter is placed in freewheel mode (manual freewheel lever pulled up) while the key is in the
on position, the scooter will not run until the manual freewheel lever is pushed down and the key is turned
to the “off” position, then back to the “on” positionꢀ
Batteries (Not Shown)
The batteries store electrical energy that powers your Legendꢀ See VIꢀ “Batteries and Chargingꢀ”
Anti-Tip Wheels
The anti-tip wheels are an integral and important safety feature of your Legendꢀ Do not, under any circumstances,
remove the anti-tip wheels from your Legendꢀ
WARNING! Do not remove the anti-tip wheels or modify your scooter in any way that is not
authorized by Prideꢀ
Motor/Transaxle Assembly
The motor/transaxle assembly is an electromechanical unit that converts electrical energy from your Legend’s
batteries into the controlled mechanical energy that drives the Legend’s wheelsꢀ
Rear Fuses
These fuses help protect your scooter’s rear lighting, turn signals, and charging systems from receiving an overload
of electrical currentꢀ These fuses are the same type used in automobilesꢀ See XIIꢀ “Care and Maintenance” for fuse
replacementꢀ
22
Legend
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . B A T T E R I E S A N D C H A R G I N G
Your Legend requires two sealed, maintenance free, 12-volt, deep cycle batteriesꢀ
n Charge the batteries prior to using your scooter for the first timeꢀ
n Keeping the batteries fully charged will keep your scooter running smoothlyꢀ
n Use only the onboard battery charger supplied with your scooterꢀ
READING YOUR BATTERY VOLTAGE
The battery condition meter on the tiller console indicates the approximate strength of your batteries using a color
codeꢀ Green indicates fully charged batteries, yellow indicates a draining charge, and red indicates that an imme-
diate recharge is necessaryꢀ See figure 7ꢀ To check the charge, you must first unplug the charger power cord and
power up your scooterꢀ To ensure the highest accuracy, the battery condition meter should be checked while
operating your scooter at full speed on a dry, level surfaceꢀ
You can also check the charge using the ammeter located on the rear of the scooterꢀ The charger power cord must
be plugged into a standard wall outlet in order to obtain a readingꢀ When the amperage reading is at or near zero
amps, the battery charging is completeꢀ See figure 8ꢀ
Figure 7. Battery Condition Meter
Figure 8. Ammeter Indicates
Battery Is Fully Charged
CHARGING YOUR BATTERIES
WARNING! Never use an extension cord to plug in your battery chargerꢀ Plug the charger
directly into a properly wired standard wall outletꢀ
WARNING! Removal of the grounding prong can create an electrical hazardꢀ If necessary
properly install an approved 3-prong adaptor to an electrical outlet having 2-pronged plug
accessꢀ Failure to heed could result in personal injury and or property damageꢀ
Follow these easy steps to charge your batteries safely:
1ꢀ Position your scooter close to a standard wall outletꢀ
2ꢀ Remove the key from the key switchꢀ
3ꢀ Make certain that the manual freewheel lever is in the drive (down) positionꢀ
4ꢀ Plug the charger power cord into the charger power cord receptacleꢀ
5ꢀ Extend the charger power cord and plug it into the wall outletꢀ It is recommended that you charge your
batteries for 8 to 14 hoursꢀ
6ꢀ When the batteries are fully charged, unplug the charger power cord from the wall outlet and then from the
charger power cord receptacleꢀ
NOTE: There is a charger inhibit function on your scooterꢀ The scooter will not run and the battery
condition meter will not operate while the batteries are chargingꢀ
Legend
23
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . B A T T E R I E S A N D C H A R G I N G
FREQUENTLY ASKED QUESTIONS (FAQS)
How does the charger work?
When your scooter’s battery voltage is low, the charger works harder and sends more electrical current to the
batteries to bring up their chargeꢀAs the voltage of the batteries approaches a full charge, the charger sends less
and less electrical current to the batteriesꢀ When the batteries are fully charged, the current sent to them from the
charger is at nearly zero amperageꢀ Therefore, when the charger is plugged in, it maintains the charge on your
scooter’s batteries, but does not overcharge themꢀWe do not recommend that you charge your scooter’s batteries
for more than 24 consecutive hoursꢀ
What if the scooter’s batteries won’t charge?
n Be sure the battery cables are connected properlyꢀ
n Ensure both ends of the charger cord are inserted fullyꢀ
Can I use a different charger?
For the safest, most efficient and balanced charging of your scooter’s batteries, we prefer and highly recommend
the simultaneous charging of both batteries by use of the onboard battery chargerꢀ
How often must I charge the batteries?
Two major factors must be considered when deciding how often to charge your scooter’s batteries:
n All day scooter use on a daily basisꢀ
n Infrequent or sporadic scooter useꢀ
With these considerations in mind, you can determine just how often and for how long you should charge your
scooter’s batteriesꢀ We designed the onboard charger so that it will not overcharge your scooter’s batteries (do
not charge them for more than 24 consecutive hours)ꢀ However, you may encounter some problems if you do not
charge your batteries often enough and if you do not charge them on a regular basisꢀ Following the five guidelines
below will provide safe and reliable battery operation and chargingꢀ
n If you use your scooter daily, charge its batteries as soon as you finish using it for the dayꢀYour scooter will be
ready each morning to give you a “full day” of serviceꢀWe recommend that you charge your scooter’s batteries
for 8 to 14 hours after daily useꢀ
n If you use your scooter once a week or less, charge its batteries at least once a week for 12 to 14 hours at a timeꢀ
n Keep your scooter’s batteries fully chargedꢀ
n Avoid deeply discharging your scooter’s batteriesꢀ
n Do not charge your scooter’s batteries for more than 24 consecutive hoursꢀ
Why do my new batteries seem weak?
Deep-cycle batteries employ a different chemical technology than that used in car batteries, nickel-cadmium batteries
(nicads), or in other common battery typesꢀ Deep-cycle batteries are specifically designed to provide power, drain
down their charge, and then accept a relatively quick rechargeꢀ
What about public transportation?
If you intend to use public transportation while using your scooter, you must contact in advance the transportation
provider to determine their specific requirementsꢀ
24
Legend
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . B A T T E R I E S A N D C H A R G I N G
How can I get maximum range or distance per charge?
Rarely will you have ideal driving conditions — smooth, flat, hard driving surfaces with no wind or curvesꢀ Often,
you will face hills, sidewalk cracks, uneven and loosely packed surfaces, curves, and windꢀAll of these driving
conditions affect the distance or running time per battery chargeꢀ The following are a few suggestions for obtaining
the maximum range per battery chargeꢀ
n Always fully charge the batteries prior to your daily useꢀ
n Maintain 30-35 psi in all of your scooter tiresꢀ
n Plan your route to avoid as many hills, cracked, broken, or soft surfaces as possibleꢀ
n Limit your baggage weight to essential itemsꢀ
n Try to maintain an even speed while your scooter is in motionꢀ
n Avoid stop-and-go drivingꢀ
What type and size of battery should I use?
Werecommenddeep-cyclebatteriesthataresealedandmaintenancefreeꢀBothAGMandGel-Cellaredeep-cycle
batteries that are similar in performanceꢀ Do not use wet-cell batteries, which have removable capsꢀ
WARNING! Corrosive chemicals contained in batteriesꢀ Use only AGM or Gel-Cell batteries
to reduce the risk of leakage or explosive conditionsꢀ
NOTE: Sealed batteries are not serviceableꢀ Do not remove the capsꢀ
Use these specifications to reorder deep-cycle batteries:
Type:
Size:
Deep-cycle (AGM orGel-Cell)
U-1, 32 AH
Voltage:
Amperage:
12 voltseach
32AH (amp hours)
To change a battery in your scooter:
WARNING! Battery posts, terminals, and related accessories contain lead and lead
compoundsꢀ Wash hands after handlingꢀ
1ꢀ Remove the seat and the rear shroudꢀ See IXꢀ “Disassembly andAssemblyꢀ”
2ꢀ Disconnect the battery strapꢀ
3ꢀ Disconnect the 2 pin, black and white battery harness from its mating plugꢀ See figure 15 in IXꢀ “Assembly
and Disassemblyꢀ”
4ꢀ Disconnect the battery cables from the battery terminalsꢀ
5ꢀ Remove the old batteryꢀ
6ꢀ Place a new battery in the battery wellꢀ
7ꢀ Connect the red battery cable to the positive (+) battery terminalꢀ
8ꢀ Connect the black battery cable to the negative (-) battery terminalꢀ
9ꢀ Reconnect the 2 pin, black and white battery harness to its mating plugsꢀ
10ꢀ Reconnect the battery strapꢀ
11ꢀ Reinstall the rear shroud and seatꢀ
Legend
25
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . B A T T E R I E S A N D C H A R G I N G
BATTERY DISPOSAL AND RECYCLING
If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag and call your authorized
Pride Provider for instructions on disposalꢀ Your authorized Pride Provider will also have the necessary informa-
tion on battery recycling, which is our recommended course of actionꢀ
Weworkcloselywithourbatterymanufacturertoprovidebatteriesthatbestsuityourscooter’sspecificelectrical
demandsꢀ Fresh batteries arrive daily at Pride and are shipped fully charged to our customersꢀ During shipping, the
batteries may encounter temperature extremes that may influence their initial performanceꢀ Heat diminishes the
charge on the battery; cold slows the available power and extends the time needed to recharge the batteryꢀ
It may take a few days for the temperature of your scooter’s batteries to stabilize and adjust to their new room or
ambient temperatureꢀ
More importantly, it takes a few charging cycles (a partial drain followed by a full recharge) to establish the critical
chemical balance that is essential to a deep-cycle battery’s peak performance and long lifeꢀ
Please follow these steps to properly break in your scooter’s new batteries for maximum efficiency and service lifeꢀ
1ꢀ Fully recharge any new battery prior to its initial useꢀ This charging cycle brings the battery up to about 88% of
its peak performance levelꢀ
2ꢀ Operate your new scooter in familiar and safe areasꢀ Drive slowly at first, and do not travel too far from your
home or familiar surroundings until you have become accustomed to your scooter’s controls and have properly
broken in your scooter’s batteriesꢀ
3ꢀ Fully recharge the batteriesꢀ They should be at over 90% of their peak performance levelꢀ
4ꢀ Operate your scooter againꢀ
5ꢀ Fully recharge the batteries againꢀ
6ꢀ After four or five charging cycles, the batteries are able to receive a charge of 100% of their peak performance
level and are able to last for an extended period of timeꢀ
How can I ensure maximum battery life?
Fully charged deep-cycle batteries provide reliable performance and extended battery lifeꢀ Keep your scooter’s
batteries fully charged whenever possibleꢀ Batteries that are regularly and deeply discharged, infrequently charged,
or stored without a full charge may be permanently damaged, causing unreliable performance and limited service lifeꢀ
How should I store my scooter and its batteries?
See XIIꢀ “Care and Maintenanceꢀ”
26
Legend
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I . O P E R A T I O N
BEFORE GETTING ONTO YOUR SCOOTER
n Have you fully charged the batteries? See VIꢀ “Batteries and Chargingꢀ”
n Is the manual freewheel lever in the drive (down) position? Never leave the manual freewheel lever pulled up
unless you are manually pushing your scooterꢀ
GETTING ONTO YOUR SCOOTER
1ꢀ Make certain that the key is removed from the key switchꢀ
WARNING! Never attempt to board or exit your scooter without first removing the key
from the key switchꢀ This will prevent the scooter from moving if accidental throttle
control lever contact is madeꢀ
2ꢀ Stand at the side of your scooterꢀ
3ꢀ Disengage the seat lock lever and rotate the seat until it is facing youꢀ
4ꢀ Make certain that the seat is locked securely in positionꢀ
5ꢀ Position yourself comfortably and securely in the seatꢀ
6ꢀ Disengage the seat lock lever and rotate the seat until you are facing forwardꢀ
7ꢀ Make certain that the seat is locked securely in positionꢀ
8ꢀ Make certain that your feet are safely on the floorboardꢀ
PRE-RIDE ADJUSTMENTS AND CHECKS
n Is the seat at the proper height? See VIIIꢀ “ ComfortAdjustmentsꢀ”
n Is the seat locked securely in place?
n Is the tiller at a comfortable setting and locked securely in place? See VIIIꢀ “ComfortAdjustmentsꢀ”
n Is the key fully inserted into the key switch and turned clockwise to the “on” position?
n Does the scooter’s horn work properly?
n Is your proposed path clear of people, pets, and obstacles?
n Have you planned your route to avoid adverse terrain and as many inclines as possible?
OPERATING YOUR SCOOTER
Keep both hands on the tiller and your feet on the floorboard at all times while operating your scooterꢀ This driving
position gives you the most control over your vehicleꢀ
n Set the speed adjustment dial to your desired speedꢀ
n Press your thumb against the appropriate throttle control leverꢀ
n The electromechanical disc park brake automatically disengages and the scooter accelerates smoothly to the
speed you preselected with the speed adjustment dialꢀ
n Pull on the left handgrip to steer your scooter to the leftꢀ
n Pull on the right handgrip to steer your scooter to the rightꢀ
n Move the tiller to the center position to drive straight aheadꢀ
n To stop, slowly release the throttle control leverꢀ The electronic brakes will automatically engage when your
scooter comes to a stopꢀ
NOTE: Your scooter’s reverse speed is slower then that of the forward speed you preset with the speed
adjustment dialꢀ
Legend
27
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I . O P E R A T I O N
GETTING OFF OF YOUR SCOOTER
1ꢀ Bring your scooter to a complete stopꢀ
2ꢀ Remove the key from the key switchꢀ
3ꢀ Disengage the seat lock lever and rotate the seat until you are facing toward the side of your scooterꢀ
4ꢀ Make certain that the seat is locked securely in positionꢀ
5ꢀ Carefully and safely get out of the seat and stand to the side of your scooterꢀ
6ꢀ You can leave the seat facing to the side to facilitate boarding your scooter next timeꢀ
POWER DOWN TIMER FEATURE
Your scooter is equipped with an energy saving auto power down timer feature designed to preserve your scooter’s
battery lifeꢀ If you mistakenly leave the key in the key switch and in the “on” position but do not use your scooter
for approximately 20 minutes, the scooters controller shuts down automaticallyꢀ Although the controller is shut
down, power will still be supplied to the scooters lighting systemꢀ
If the power down timer feature takes effect, perform the following steps to resume normal operationꢀ
1ꢀ Remove the key from the key switchꢀ
2ꢀ Reinsert the key and power up your scooterꢀ
28
Legend
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I I . C O M F O R T A D J U S T M E N T S
WARNING! Remove the key from the key switch before adjusting the tiller or the seatꢀ
Never attempt to adjust the tiller or the seat while the scooter is in motionꢀ
TILLER ANGLE ADJUSTMENT
Your scooter is equipped with a pivoting tiller that
allowsadjustmenttoseveralpositionsfromthescooter
deck to the furthest forward stopꢀ
1ꢀ Lift the tiller adjustment leverꢀ See figure 9ꢀ
2ꢀ Move the tiller to a comfortable positionꢀ
3ꢀ Release the tiller adjustment lever to secure the
tiller in positionꢀ
TILLER ADJUSTMENT
LEVER
SEAT ROTATION ADJUSTMENT
The seat lock lever locks the seat in one of eight posi-
tionsꢀSee figure 10ꢀ
1ꢀ Push forward on the seat lock lever to unlock the
seatꢀ
Figure 9. Tiller Adjustment
2ꢀ Rotate the seat to the desired positionꢀ
3ꢀ Release the seat lock lever to lock the seat securely
in placeꢀ If the seat is not locked into position, gently
rock the seat back and forth until you hear the lever
“clickꢀ”
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the Legend’s seat forward or
rearward to adjust the distance between the seat
and the tillerꢀ See figure 10ꢀ
1ꢀ Move the seat sliding lever outwardꢀ
2ꢀ While holding the lever out, slide the seat forward
or rearwardꢀ
3ꢀ Release the seat sliding lever once the seat is in the
desired positionꢀ
SEAT LOCK
LEVER
SEAT SLIDING LEVER
Figure 10. Seat Adjustments
Legend
29
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I I . C O M F O R T A D J U S T M E N T S
SEATBACK ADJUSTMENT
WARNING! Do not operate your scooter with the seatback in a reclined positionꢀ
WARNING! Always keep your back pressed firmly against the seat back while adjusting itꢀ
To adjust your Legend's reclining seat, perform these stepsꢀ See figure 10Aꢀ
1ꢀ While pulling up on the seatback adjustment lever, lean forward or backward to adjust the seatbackꢀ
2ꢀ Release the seatback adjustment lever once the seat is in a comfortable riding positionꢀ
ARMREST ANGLE ADJUSTMENT
The armrests of your scooter can be adjusted upward or downwardꢀ See figure 10Bꢀ
n By turning the adjustment dial, the armrest will either raise or lowerꢀ
NOTE: The armrests also pivot upward to make getting on and off of your scooter easierꢀ
ADJUSTMENT
DIAL
Figure 10A. Seatback Adjustment Lever
Figure 10B. Armrest Angle Adjustment
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to different heightsꢀ See figure 11ꢀ
1ꢀ Remove the seat and shroud from your Scooterꢀ See IXꢀ
“Disassembly andAssemblyꢀ”
2ꢀ Loosen the seat height adjustment bolt-nut and remove it
from the boltꢀ Remove the bolt and washersꢀ
3ꢀ Loosen the seat post boltꢀ
4ꢀ Raise or lower the upper seat post to the desired seat heightꢀ
5ꢀ While holding the upper seat post at that height, match up
the locating holes in the upper seat post with those of the
lower seat postꢀ
6ꢀ With one washer on the seat height adjustment bolt insert it
through the locating holes of both the upper and lower seat
postsꢀ Reinstall the other washer and bolt-nut and tightenꢀ
UPPER SEAT
SEAT HEIGHT
ADJUSTMENT
BOLT—NUT
POST
LOCATING
HOLES
SEAT HEIGHT
ADJUSTMENT
BOLT
SEAT POST
BOLT—NUT
SEAT POST
BOLT
NOTE: Ensure both washers have been reinstalled before
fully tightening the bolt-nutꢀ
LOWER SEAT POST
Figure 11. Seat Height Adjustment
7ꢀ Tighten the seat post bolt
8ꢀ Reinstall the rear shroud and the seatꢀ
30
Legend
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I I . C O M F O R T A D J U S T M E N T S
POWER SEAT (OPTIONAL)
Your Legend may be equipped with a power seatꢀThe power seat actuator is designed to raise or lower the seat
automatically with minimal effort on the part of the operatorꢀ
WARNING! The power seat is intended for operation only while your scooter is stationary
and on a level surfaceꢀ Its purpose is to aid you in reaching objectsꢀ
Strict adherence to the following safety rules is vital to your safety:
n Do not attempt to raise or lower the seat while in motion!
n Operate the power seat only on level groundꢀ
n Do not operate your scooter with the power seat elevatedꢀ
n It is recommended that the scooter be driven only with the seat in the lowest
positionꢀ
Raising and lowering the power seat when traveling or when on an incline could cause the
scooter to tip over, resulting in serious injury an/or scooter damageꢀ Keep the power seat
in its lowest position when traveling or when on an inclineꢀ
To operate your power seat:
If the toggle switch is mounted on the right side of the scooter:
1ꢀ Push the toggle switch lever forward to raise the seatꢀ
2ꢀ Pull the toggle switch lever backward to lower the seatꢀ
3ꢀ Release the toggle switch lever when you have attained your desired heightꢀ
If the toggle switch is mounted on the left side of the scooter:
1ꢀ Push the toggle switch lever forward to lower the seatꢀ
2ꢀ Pull the toggle switch lever backward to raise the seatꢀ
3ꢀ Release the toggle switch lever when you have attained your desired heightꢀ
Ensure your seat is in the lowest position before you attempt to drive your scooter againꢀ
Legend
31
Download from Www.Somanuals.com. All Manuals Search And Download.
I X . DISASSEMBLY AND ASSEMBLY
DISASSEMBLY
You can disassemble the scooter into seven pieces: the seat, the front section, the rear section, the rear shroud, the
basket, and the batteriesꢀ See figure 12ꢀ Place the scooter in an area where you have sufficient clearance to move
the parts aroundꢀYou need about four or five feet in all directionsꢀYou may need assistance to lift some of the
scooter componentsꢀ See IVꢀ “Specifications” for individual component weightsꢀ
WARNING! Lifting weight beyond your physical capability may result in personal injuryꢀ
Ask for assistance when necessary while disassembling or assembling your scooterꢀ
FRONT SECTION
REAR SHROUD
SEAT
BATTERIES
REAR SECTION
BASKET
Figure 12. The Legend Disassembled
No tools are required to disassemble or assemble your scooterꢀAlways disassemble or assemble your scooter on
a level, dry surface with sufficient room for you to work and move around your scooterꢀ Keep in mind that the
disassembled sections of the scooter take up more floor space than the assembled scooterꢀ
1ꢀ Place the manual freewheel lever in the drive (down) positionꢀ
2ꢀ Coil the charger power cord and store it for future useꢀ
3ꢀ Push forward on the seat lock lever to unlock the seat; lift the seat up and off the scooterꢀ See figure13ꢀ
4ꢀ Gently pull the shroud away from the frame at the bottom and lift it off of the scooterꢀ See figure 14ꢀ
5ꢀ Disconnect the battery strapꢀ
PULL SHROUD AWAY
FROM FRAME HERE
BEFORE LIFTING
SHROUD UP
Figure 13. Removing The Seat
Figure 14. Rear Shroud Removal
32
Legend
Download from Www.Somanuals.com. All Manuals Search And Download.
I X . D I S A S S E M B LY A N D A S S E M B LY
6ꢀ Unplug both black and white 2-pin battery harnessesꢀ See figure 15ꢀ
7ꢀ Unplug the front-to-rear harnessꢀ See figure 16ꢀ
CAUTION! Failure to unplug both battery harnesses and the front-to-rear harness prior to
separating the front and rear sections could result in permanent damage to the scooterꢀ
Figure 16. Front-To-Rear Harness
Figure 15. Battery Harnesses
Toggle Latch Release
1ꢀ Push in the toggle latch release button while pulling back the toggle latchꢀ See figure 17ꢀ
2ꢀ Position the toggle latch buckle over the top of the toggle latchꢀ See figure 18ꢀ
3ꢀ Lower the tiller to the scooter floorboardꢀ
TOGGLE
LATCH
BUCKLE
TOGGLE
LATCH
TOGGLE
LATCH
RELEASE
BUTTON
Figure 17. Toggle Latch (Latched)
Figure 18. Toggle Latch (Unlatched)
Frame Separation
1ꢀ Push back on the seat post to pivot the scooter’s rear section backwards until the rear section is standing
vertically on its rear bumperꢀ See figure 19ꢀ
2ꢀ Lift the front section up until the lower pegs are no longer in the slotsꢀ See figure 20ꢀ
3ꢀ Carefully move the front section away from the rear sectionꢀ
Figure 19. Frame Positioning
Figure 20. Separating The Frame Sections
Legend
33
Download from Www.Somanuals.com. All Manuals Search And Download.
I X . D I S A S S E M B LY A N D A S S E M B LY
ASSEMBLY
1ꢀ Position the front and rear sections of your scooter as
showninfigure21ꢀ
2ꢀ Align the lower slots of the front section with the cor-
responding pegs on the front of the rear sectionꢀ
CAUTION! Position the front-to-rear
harness cable so it won’t become
pinched between the frame halves
when
pivoting
the
rear
section forwardꢀ See figure 22ꢀ
3ꢀ Holding the seat post, slowly pivot the rear section
forward until the curved locking brackets are fully con-
nected onto the top rear pegsꢀ See figure 22ꢀ
4ꢀ Raise the tillerꢀ
Figure 21. Frame Sections
FRONT-TO-REAR HARNESS CABLE
5ꢀ Secure the toggle latchꢀ See figure 17ꢀ
n Lower the toggle latch buckleꢀ
n Push back on the toggle latch so it locks into placeꢀ
6ꢀ Connect the front-to-rear harness and both battery
harnessesꢀ
7ꢀ Replace the shroudꢀ
8ꢀ Replace the seat, and lock it into placeꢀ
Figure 22. Frame Lockup
34
Legend
Download from Www.Somanuals.com. All Manuals Search And Download.
X . O P T I O N A L A C C E S S O R I E S
OPTIONAL ACCESSORIES
For information concerning these optional accessories, contact your authorized Pride Providerꢀ
•Single Cane/Crutch Holder
• Double Cane/Crutch Holder
• Walker Holder
• Forearm Crutch
Holder
• Oxygen Tank Holder
• Rear Basket
• Quad Cane Holder
• Safety Flag
• Double Crutch Holder
Legend
35
Download from Www.Somanuals.com. All Manuals Search And Download.
X I . B A S I C T R O U B L E S H O O T I N G
Any electromechanical device occasionally requires some troubleshootingꢀ However, most of the problems that
may arise can usually be solved with a bit of thought and common senseꢀ Many of these problems occur because
the batteries are not fully charged or because the batteries are worn down and can no longer hold a chargeꢀ
DIAGNOSTIC FLASH CODES
The diagnostic flash codes for your scooter are designed to help you perform basic troubleshooting quickly and easilyꢀ
A diagnostic flash code will flash from the status LED in the event one of the conditions listed below developsꢀ
NOTE: Your scooter will not run unless the flash code condition is resolved and the scooter has been
turned off, then turned back onꢀ
CONDITION
SOLUTION
FLASH CODE
(1) „ꢀ
Batteries are too low to operate the Charge batteries or unplug the charger power cord
scooter or the charger is operating.
Motor disconnected.
Motor wiring fault.
from the electrical outlet.
Check all connections to the motor.
Call your authorized Pride Provider for assistance.
(2) „„ꢀ
(3) „„„ꢀ
(6) „„„„„„ꢀ
Scooter is operating with the charger Unplug the charger power cord from the charger power
attached.
cord receptacle.
(7) „„„„„„„ꢀ
(8) „„„„„„„„ꢀ
Throttle potentiometer fault.
Internal controller fault.
Call your authorized Pride Provider for assistance.
Call your authorized Pride Provider for assistance.
(9) „„„„„„„„„ꢀ
Brake fault—your scooter was left in Turn the scooter key to the off position, then push the
freewheel mode.
manual freewheel lever to the (down) drive position,
and restart your scooter.
(10) „„„„„„„„„„ꢀ High battery voltage. The batteries have Leave the scooter turned on to drain the batteries to a
been overcharged and the scooter won’t sufficient level. If the batteries continue to overcharge
run.
call your authorized Pride Provider for assistance.
What if all the systems on my scooter seem to be “dead”?
n Make certain that the key is in the “on” positionꢀ
n Check that the batteries are fully chargedꢀ See VIꢀ “Batteries and Chargingꢀ”
n Push in the main circuit breaker reset buttonꢀ SeeVꢀ “Your Legendꢀ”
n Make certain that both battery harnesses are firmly connected to the rear electronics module and to the battery
terminalsꢀ See IXꢀ “Disassembly andAssemblyꢀ”
n Make sure that the front-to-rear harness is firmly connected to the rear electronics moduleꢀ See IXꢀ “Disas-
sembly andAssemblyꢀ”
n Check the 3-amp fuse located on the lower portion of the tiller consoleꢀ See XIIꢀ “Care and Maintenance” for
fuse replacementꢀ
n Be sure the Power DownTimer feature feature hasn’t been activatedꢀ
What if my scooter does not move when I press the throttle control levers?
n Whenthemanualfreewheelleverispulledup,thebrakesaredisengagedandallpowertothemotor/transaxleassemblyiscutꢀ
n Push down on the manual freewheel lever, turn the scooter off, and then turn the scooter on to return to normal
scooter operationꢀ
36
Legend
Download from Www.Somanuals.com. All Manuals Search And Download.
X I . B A S I C T R O U B L E S H O O T I N G
What if the main circuit breaker repeatedly trips? See Vꢀ “Your Legendꢀ”
n Charge the scooter’s batteries more frequentlyꢀ See VIꢀ “Batteries and Chargingꢀ”
n If the problem continues, have both of your scooter’s batteries load tested by your authorized Pride Providerꢀ
n You may also perform the load test yourselfꢀ Battery load testers are available at most automotive parts storesꢀ
n Follow the directions supplied with the load testerꢀ
n See VIꢀ “Batteries and Charging” or IVꢀ “Specifications” for information about your scooter’s battery typeꢀ
What if the battery condition meter dips way down and the motor surges or hesitates when I press my
scooter’s throttle control lever? (See Vꢀ “Your Legendꢀ”)
n Fully charge your scooter’s batteriesꢀ See VIꢀ “Batteries and Chargingꢀ”
n Have your authorized Pride Provider load test each batteryꢀ
n Or, see the previous troubleshooting question for load testing the batteries yourselfꢀ
If you experience any problems with your scooter that you are not able to solve, immediately contact your authorized
Pride Provider for information, maintenance, and serviceꢀ
Legend
37
Download from Www.Somanuals.com. All Manuals Search And Download.
X I I . C A R E A N D M A I N T E N A N C E
Your scooter requires a minimal amount of care and maintenanceꢀ If you do not feel confident in your ability to
perform the maintenance listed below, you may schedule inspection and maintenance at your authorized Pride
ProviderꢀThe following areas require periodic inspection and/or care and maintenanceꢀ
TIRE PRESSURE
n If equipped with pneumatic tires, always maintain a proper 30-35 psi tire pressureꢀ
WARNING! It is important that 30-35 psi tire pressure be maintained in pneumatic tires at
all timesꢀ Do not underinflate or overinflate your tiresꢀ Low pressure may result in loss of
control, and overinflated tires may burstꢀ Failure to maintain 30-35 psi tire pressure in
pneumatic tires at all times may result in tire and/or wheel failure, causing serious personal
injury and/or damage to your scooterꢀ
n Regularly inspect your scooter’s tires for signs of wearꢀ
EXTERIOR SURFACES
Bumpers, tires, trim, and the tiller boot can benefit from an occasional application of rubber or vinyl conditionerꢀ
WARNING! Do not use a rubber or vinyl conditioner on the scooter’s vinyl seat, floorboard,
or tire treadꢀ They will become dangerously slippery and result in personal injury and/or
damage to your scooterꢀ
BATTERY TERMINAL CONNECTIONS
n Make certain that the terminal connections remain tight and uncorrodedꢀ
n The batteries must sit flat in the battery wellsꢀ
n The battery terminals should face the rear of the scooterꢀ
WIRING HARNESSES
n Regularly check all wiring connectionsꢀ
n Regularly check all wiring insulation, including the charger power cord, for wear or damageꢀ
n Have your authorized Pride Provider repair or replace any damaged connector, connection, or insulation that
you find before using your scooter againꢀ
ABS PLASTIC SHROUDS
n The front tiller shroud, front shroud, and the rear shroud are formed from durableABS plastic and are coated
with an advanced formula urethane paintꢀ
n A light application of car wax will help the shrouds retain their high glossꢀ
AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY
These items are all prelubricated, sealed, and require no subsequent lubricationꢀ
MOTOR BRUSHES
The motor brushes are housed inside of the motor transaxle/assemblyꢀ They should be inspected periodically for
wear by your authorized Pride Providerꢀ
38
Legend
Download from Www.Somanuals.com. All Manuals Search And Download.
X I I . C A R E A N D M A I N T E N A N C E
CONSOLE, CHARGER, AND REAR ELECTRONICS
n Allow these areas to dry thoroughly if they have been exposed to moisture before operating your scooter
againꢀ
FUSE REPLACEMENT
In the event a fuse should cease to work:
n Remove the fuse by pulling it out of its slotꢀ
n Examine the fuse to be sure it is blownꢀ See figures 23 and 23Aꢀ
n Insert a new fuse of the proper ratingꢀ
WARNING! The replacement fuse must exactly match the rating of the new fuseꢀ Failure
to use properly rated fuses may cause damage to the electrical system and may result in
personal injuryꢀ
Figure 23. Working Fuse
Figure 23A. Blown Fuse (Replace)
REAR LIGHTS
Light bulbs for the rear running lights and turn signals are easily replaceableꢀ
NOTE: Replacement light bulbs can be purchased from your authorized Pride Providerꢀ Use only 24-volt
light bulbsꢀ
n Remove the light coverꢀ
n Gently remove the bulb by pulling it straight outꢀ
n Insert a new 24V, 5-watt bulbꢀ
n Replace the light coverꢀ
STORING YOUR SCOOTER
If you plan on not using your scooter for an extended period of time, it is best to:
n Fully charge its batteries prior to storageꢀ
n Disconnect the batteries from the scooterꢀ
n Store your scooter in a warm, dry environmentꢀ
n Avoid storing your scooter where it will be exposed to temperature extremesꢀ
WARNING! Always protect batteries from freezing temperatures and never charge a frozen
batteryꢀ This damages the battery and can cause personal injuryꢀ
For prolonged storage, you may wish to place several boards under the frame of your scooter to raise it off of the
groundꢀ This takes the weight off the tires and reduces the possibility of flat spots developing on the areas of the
tires contacting the groundꢀ
Legend
39
Download from Www.Somanuals.com. All Manuals Search And Download.
X I I I . W A R R A N T Y
THREE-YEAR LIMITED WARRANTY
Three years on all structural frame components; including platform, fork, seat post, and frameꢀ
Three-year prorata drive train warranty; including transaxle, motor, and brakeꢀ
n First year: 100% replacement of parts cost
n Second year: 67% replacement of parts cost
n Third year: 50% replacement of parts cost
THREE-YEAR WARRANTY EXCEPTIONS
Transaxle: In cases where there is an increase in the operational noise level, the warranty does not applyꢀ (The
increase in operational noise level usually occurs due to abusive and excessive strain on the scooterꢀ)
Motor brake: Three-year warranty for the electrical function of the motor brakeꢀ Brake pads are a wear item and
are not warrantedꢀ
ONE-YEAR LIMITED WARRANTY
For one (1) year from the date of purchase, Pride will repair or replace at our option to the original purchaser, free
of charge, any part or electronic component found upon examination by an authorized representative of Pride to be
defective in material and/or workmanshipꢀ
The battery is warranted by the battery manufacturer (six-month limited warranty)ꢀ The battery is not warranted by
Prideꢀ
Warranty service can be performed by Pride or by an authorized Pride Providerꢀ Do not return faulty parts to Pride
without prior consentꢀAll transportation costs and shipping damage incurred while submitting parts for repair or
replacement are the responsibility of the original purchaserꢀ
WARRANTY EXCLUSIONS
n ABS plastic shrouds and footrest covers (wear items and not warranted)
n Batteries (the battery manufacturer provides a 6 month limited warranty)
n Tires and tire tubes (wear items and not warranted)
n Upholstery and seating (wear items and not warranted)
n Repairs and/or modifications made to any part of the scooter without specific and prior consent from Pride
n Circumstances beyond the control of Pride
n Damage caused by: battery fluid spillage or leakage, abuse, misuse, accident, or negligence, improper opera-
tion, maintenance, or storage, commercial use or use other than normal
n Labor, service calls, shipping, and other charges incurred for repair of the product
There is no other express warrantyꢀ
Implied warranties, including those of merchantability and fitness for a particular purpose, are limited to one (1)
year from the date of original purchase and to the extent permitted by lawꢀAny and all implied warranties are
excludedꢀThisistheexclusiveremedyꢀLiabilitiesforconsequentialdamagesunderanyandallwarrantiesareexcludedꢀ
Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion of limitation
of incidental or consequential damagesꢀ So, the above limitation or exclusion may not apply to youꢀ
40
Legend
Download from Www.Somanuals.com. All Manuals Search And Download.
N O T E S
42
Legend
Download from Www.Somanuals.com. All Manuals Search And Download.
182 SusquehannaAve.
Exeter, PA 18643
1-800-800-8586
Download from Www.Somanuals.com. All Manuals Search And Download.
|
