INSTALLATION MANUAL
PSD-BW/PSD-BWL
Nesting Cart Series
AUSTRALIA,NEW ZEALAND,
OCEANIA (Distributor)
P.O. Box 295
NORTH AMERICA
3130 East Miraloma Avenue
Anaheim, CA 92806 USA
USA and Canada –
EUROPE
Swallow House,
Shilton Industrial Estate,
Shilton, Coventry, England CV79JY
Phone: +44 (0) 2476 614700
Fax: +44 (0) 2476 614710
Mordialloc Victoria 3195
Australia
Phone: 03 9586 6330
Phone: 800-368-9700
Fax: 800-832-4888
Other Locations – Phone: 001.714.632.7100; Fax: 001.714.632.1044
©Premier Mounts 2007
9532-003-011-01
Download from Www.Somanuals.com. All Manuals Search And Download.
PSD-BW/L
Warning Statements
WARNING: PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE
USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE
FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED
ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY
DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS OR CAUSES OF ACTION OF
WHATEVER KIND RESULTING FROM, ARISING OUT OF OR IN ANY MANNER
RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS.
WARNING: THE FLOOR STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST 250 LBS.
IF NOT, THE FLOOR STRUCTURE MUST BE REINFORCED. PROPER INSTALLATION
PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED IN THE
INSTALLATION INSTRUCTIONS, MUST BE ADHERED TO. FAILURE TO DO SO
COULD RESULT IN SERIOUS PERSONAL INJURY, OR EVEN DEATH.
WARNING: SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE
ASSEMBLY OF THIS PRODUCT. USE PROPER SAFETY GEAR AND TOOLS FOR THE
ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY.
WARNING: PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE ASSEMBLY
INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD. THE
ASSEMBLY INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND
PROPERTY DAMAGE. KEEP THESE ASSEMBLY INSTRUCTIONS IN AN EASILY
ACCESSIBLE LOCATION FOR FUTURE REFERENCE.
Indicates that the power plug is to be
disconnected from the power outlet.
Contact Premier Mounts with any
questions.
Safety precautions must be taken at all
times.
Warning and Caution statements.
Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do
so could result in damage to the plasma display and/or damage to the mounting surface.
Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of direct heat
energy. Failure to do so may result in damage to the display and could increase the risk of fire.
At least two qualified people should perform the assembly procedure. Injury and/or damage can
result from dropping or mishandling the display.
DANGER: DO NOT ATTACH EQUIPMENT WEIGHING MORE THAN 75LBS. ABOVE THE 60”
MARKED LINE ON THE SUPPORT POLES. DOING SO MAY CAUSE THE NESTING
CART TO TIP OVER, RESULTING IN SEVERE PROPERTY DAMAGE AND/OR
PERSONAL INJURY.
Page - 3 -
Installation Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
PSD-BW/L
Parts List
Congratulations on purchasing the PSD-BW/PSD-BWL Nesting Cart. The PSD-BW/PSD-BWL Nesting Cart is
shipped with all proper installation hardware and components. Please verify that none of these parts are missing
and/or damaged before assembly. If there are parts missing and/or damaged, please stop the assembly and
contact Premier Mounts (800) 368-7000.
NOTE: Some mounting configurations will allow for a “landscape” orientation. In these situations, when
moving the PSD-BW/L Nesting Cart through a doorway, the orientation of the display must be
returned to the “portrait” orientation. If not, maneuvering through the doorway could prove costly by
damaging the display.
BW Base (Qty 1)
PSD-SPA (Qty 1)
3” Castors (Qty 4)
(2 locking,
2 non-locking)
M8 x 10mm Set Screws
(Qty 6)
Support Tubes
(Qty 2)
NOTE: Length will
vary depending on
model purchased.
M10 Flat Washers
(Qty 4)
M10 x 12mm Hex
Head Screws
(Qty 4)
21mm Caster Wrench
(Qty 1)
Installation Tools
Socket head wrench
Soft Material/ Blanket
M5 Allen Wrench (Supplied)
5/32” Allen Wrench (Supplied)
Installation Instructions
Page - 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PSD-BW/L
BW Base Castor Installation (Figure 1)
Unpack the PSD-BW/L Nesting Cart and review any WARNING statements that apply to the installation.
Select the desired location for the PSD-BW/L Nesting Cart.
Locking Castor
Non-Locking Castor
Figure 1
1. Place the BW/L on a flat surface.
NOTE:
Make sure the locking castors (Qty 2) are attached to the rear legs of the Nesting Cart.
2. Insert each castor into the threaded mounting point located on the underside of the BW/L base (Figure 1). Turn each castor
clockwise to tighten. Make sure all four castors are tightened all the way until flush with the base. Tighten using the 21mm caster
wrench (supplied).
Support Tube Installation (Figure 2)
1. Place the BW/L on a flat surface.
2. Take the support tubes and slide them over the mounting clamps that are located on the Nesting Cart.
NOTE:
To perform the following step, the access holes that are located at the end of the support tubes must line up with the
set screw holes on the mounting clamps. The upper access holes will be used for cable management once the display
has been mounted to the support tubes.
3. Insert the set screws into each hole and tighten using the supplied M5 Allen Wrench (Figure 2).
M5 Allen Wrench
Support Tubes
Access Holes
Mounting Clamps
PSD-BW/L Base
M10 x 35mm Set
Screw
Figure 2
Page - 5 -
Installation Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
PSD-BW/L
PSD-SPA Installation (Figure 3)
NOTE:
Use of the PSD-SPA will depend on the mount that is used. All PSM/CTM Series mounts require using the PSD-SPA.
The Revolution Series, USA and UFA Mounts, however, do not require the use of the PSD-SPA.
1. Slide the PSD-SPA over and down the support tubes.
2. Once the desired height has been determined, tighten the four (4) M8 x 10mm set screws, using the 5/32” Allen wrench (supplied)
to secure the PSD-SPA (Figure 3).
PSD-SPA
5/32” Allen Wrench
Support Tubes
Support Tubes
Figure 3
PSD-BW/L Nesting Cart Storage (Figure 4)
The PSD-BW/L is designed to maximize storage space. When storing multiple carts, slide the Nesting Carts together as close as
possible.
NOTE: Please adhere to any WARNING statements that will apply to the different mounting configurations the PSD-BW/L
Nesting Cart will be used with.
Figure 4
Installation Instructions
Page - 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PSD-BW/L
Optional Mounting Configurations
CTM-Series
Revolution Series
USA/UFA Series
Page 7
Installation Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
PSD-BW/L
Technical Specifications
All measurements are in inches (mm).
PSD-BWL
PSD-BW
Notes
Installation Instructions
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
Rotary Tilt Mount
Model: RTM-L
AUSTRALIA, NEW ZEALAND,
OCEANIA (Distributor)
P.O. Box 295
NORTH AMERICA
3130 East Miraloma Avenue
Anaheim, CA 92806 USA
USA and Canada -
EUROPE
Swallow House,
Mordialloc Victoria 3195
Australia
Phone: 03 9586 6330
Shilton Industrial Estate,
Shilton, Coventry, England CV79JY
Phone: +44 (0) 2476 614700
Fax: +44 (0) 2476 614710
Phone: 800-368-9700
Fax: 800-832-4888
Other Locations - Phone: (001)-714-632-7100; Fax: (001)-714-632-1044
©Premier Mounts 2007
9531-009-011-00
Download from Www.Somanuals.com. All Manuals Search And Download.
RTM-L
TABLE OF CONTENTS
Warranty
2
Contact Premier Mounts
Warning Statements
Parts List
2
3
4
Installation Tools
Thread Depth Indicator
Mount Installation
4
7
8
Universal Mounting Bracket Installation
Display Orientation
9
11
11
12
12
12
13
Securing the Display
Tilt Positioning
Optional Configurations
Technical Specifications
Addendum
PREMIER MOUNTS
LIMITED LIFETIME WARRANTY
What and Who is Covered by this Limited Warranty and for How Long
Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this
product. The limited warranty is valid only for the original purchaser of the product.
What Premier Mounts Will Do
At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective. If Premier
Mounts chooses to replace a defective product or part, a replacement product or part will be shipped to you at no charge, but you must
pay any labor costs.
What is Not Covered; Limitations
PREMIER MOUNTS DISCLAIMS ANY LIABILITY FOR DAMAGE TO MOUNTS, ADAPTERS, DISPLAYS, PROJECTORS,
OTHER PROPERTY, OR PERSONAL INJURY RESULTING, IN WHOLE OR IN PART, FROM IMPROPER INSTALLATION,
MODIFICATION, USE OR MISUSE OF ITS PRODUCTS.
PREMIER MOUNTS DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. PREMIER MOUNTS IS NOT RESPONSIBLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, INABILITY TO USE ITS PRODUCTS
OR LABOR COSTS FOR REMOVING AND REPLACING DEFECTIVE PRODUCTS OR PARTS. SOME STATES DO NOTALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
What Customers Must Do for Limited Warranty Service
If you discover a problem that you think may be covered by the warranty you MUST REPORT it in writing to the address below within
thirty (30) days. Proof of purchase (an original sales receipt) from the original consumer purchaser must accompany all warranty claims.
Warranty claims must also include a description of the problem, the purchaser’s name, address, and telephone number. General inquiries
can be addressed to Premier Mounts Customer Service at 1-800-368-9700. Warranty claims will not be accepted over the phone or by
fax.
Premier Mounts
Attn: Warranty Claim
3130 E. Miraloma Avenue
Anaheim, CA 92806
How State Law Applies
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE.
Page 2
Installation Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
RTM-L
Warning Statements
WARNING:
PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY
PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS
DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS, AND
IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS OR CAUSES OF
ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR IN ANY MANNER
RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS.
WARNING:
THE MOUNTING SURFACE MUST BE CAPABLE OF SUPPORTING 160 LBS. IF NOT, THE MOUNTING
SURFACE MUST BE REINFORCED. PROPER INSTALLATION PROCEDURES BY A QUALIFIED
SERVICE TECHNICIAN, AS OUTLINED IN THE INSTALLATION INSTRUCTIONS, MUST BE
ADHERED TO. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY, OR EVEN
DEATH.
WARNING:
SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE INSTALLATION OF THIS
PRODUCT. USE PROPER SAFETY GEAR AND TOOLS FOR THE INSTALLATION PROCEDURE TO
PREVENT PERSONAL INJURY.
WARNING:
PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS SHOULD
BE READ AND COMPLETELY UNDERSTOOD. THE INSTALLATION INSTRUCTIONS MUST BE READ
TO PREVENT PERSONAL INJURY AND PROPERTY DAMAGE. KEEP THESE INSTALLATION
INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE.
Indicates that the power plug is to be disconnected from the power outlet.
Safety precautions must be taken at all times.
Warning and Caution statements.
A secure structure must support the weight, or load, of the display.
Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result
in damage to the display and/or damage to the mounting surface.
Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of direct heat energy. Failure
to do so may result in damage to the display and could increase the risk of fire.
At least two qualified people should perform the installation procedure. Injury and/or damage can result from
dropping or mishandling the display.
Contact Premier Mounts with any technical/ installation questions.
Installation Instructions
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
RTM-L
Parts List
NOTE: This mount is shipped with all installation hardware and components. Make sure that none of
these parts are missing and/ or damaged before beginning installation. If there are parts missing
and/or damaged, please stop and contact Premier Mounts (800) 368-9700.
Griplate™ (Qty 8)
Universal
Mounting Brackets
(Qty 2)
Hand Crank (Qty 1)
M6 Knurl Knob
(Qty 1)
Rotary Tilt
Mount (Qty 1)
Installation Tools
Phillips Head Screw Driver
Tape Measure
Soft Material/ Blanket
Thread Depth Indicator (Supplied) Level (Supplied)
Level (Supplied)
Pencil
5/32" Allen Wrench (Supplied)
Page 4
Installation Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
RTM-L
Parts List (Cont.)
(Qty 8)
(Qty 8)
M4 x 16
M4 x 25
M6 x 20
(Qty 8)
(Qty 8)
M6 x 30
M6 x 45
(Qty 8)
M5 x 12
M5 x 16
(Qty 8)
(Qty 8)
M8 x 20
M8 x 25
(Qty 8)
(Qty 8)
M5 x 20
M5 x 25
M5 x 50
(Qty 8)
(Qty 8)
(Qty 8)
M8 x 30
(Qty 8)
(Qty 8)
M6 x 16
(Qty 8)
M8 x 35
M8 x 45
(Qty 8)
M8 x 70
(Qty 4)
Installation Instructions
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
RTM-L
Parts List (Cont.)
Nylon spacers and flat washers' actual size
NOTE:
The nylon spacers may be stacked to achieve proper spacing.
9/16" Nylon spacers
(Qty 8)
1/4" Nylon spacers
(large)
(Qty 8)
1/2" Nylon spacers
(large)
Nylon sleeves
(Qty 8)
(Qty 12)
5/16" Flat washers
(metal)
(Qty 8)
1" Nylon spacers
(Qty 8)
1/4" Nylon spacers
(Small)
(Qty 8)
Page 6
Installation Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
RTM-L
Thread Depth Indicator
1. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the flat panel
to make sure the inserts measure the same full depth and mark it (Figure 1).
2. Locate the correct diameter screw for the thread insert. Compare your marking to the screws (supplied).
3. The screw length must not bypass the marking. Select another screw size (Figure 2 and 3), until you find
one that comes closest to your mark without going past.
4. If your selected screw is longer than the marking on the thread depth indicator, DO NOT USE this screw.
Inverted Flat Panel
Thread
Display
Depth
Marking the Depth
Indicator
Threaded Insert
Figure 1
Thread Depth
Indicator
Thread Depth
Indicator
Screw
Screw
Marking
Marking
Figure 2
Figure 3
Installation Instructions
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
RTM-L
Mount Installation
NOTE: The installation instructions that are contained in this manual refer only to the RTM-L. The
installation instructions for the various bases that are used with the RTM-L will be included with
those products.
NOTE: Prior to installing the RTM-L, the mounting configuration must already be assembled (base,
support poles, etc.).
Mounting
Block
Set Screws
Cradle
Support
Poles
2. To secure the mounting block to the support
poles, tighten the four set screws (located on
each side of the mounting block), using the
5/32" Allen wrench (supplied).
1. Slide the mounting block
over and down the support
poles.
Page 8
Installation Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
RTM-L
Universal Mounting Bracket Assembly
1. Place the universal bracket bar and the universal brackets on a flat surface.
2. Slide the universal brackets onto the universal bracket bar (as shown below) with the set screws facing
up. At this time, do not tighten the set screws that are located on the universal bracket.
3. Place the display on a soft, flat surface, face-down. Next, place the universal bracket assembly on the
back of the display, with the universal brackets resting directly over the display mounting points.
4. Once the desired position has been determined, place the Griplate™ washers over each mounting point
and secure them using the appropriate hardware (see Page 5).
NOTE: For the two upper mounting points, the Griplate™ dimples must be facing up. For the two
lower mounting points, the Griplate™ dimples must be facing down.
5. At this time, center the universal bracket bar and tighten the set screws that are located on the universal
brackets.
M4 M5 M6 M8
Griplate™
Universal Mounting Brackets
Set Screw
Griplate™
Set Screw
Griplate™
U n i v e r s a l
Bracket Bar
WARNING: IT WILL TAKE TWO PEOPLE TO COMPLETE THE NEXT INSTALLATION STEP.
Installation Instructions
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
RTM-L
3. Lower the universal bracket bar and display into the
cradle (as to the left).
Nylon
Sleeve
NOTE: The circular portion of the universal bracket bar
must rest inside the nylon sleeve. If seated
improperly, the operation of the RTM-L will be
hindered and the nylon sleeve will become
damaged.
Knurl Knob Mounting Points (a knurl knob may be
placed in either mounting hole)
4. Insert an M6 knurl knob into the knurl knob mounting
point and tighten.
Locking Screws
5. Tighten the two (2) Phillips head screws (located
on the side of the mounting block) once the final
position is attained.
Page 10
Installation Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
RTM-L
Display Orientation
The RTM-L will allow the user to adjust the display a full 360°.
WARNING: BEFORE ROTATING THE RTM-L, MAKE SURE THAT THE M6 KNURL KNOB IS
SECURELY FASTENED TO THE RTM-L. ALSO, PLEASE MAKE SURE YOU ALLOW
ENOUGH CABLE AND WIRE CLEARANCE FOR FULL ROTATION.
1. To adjust the RTM-L, rotate the
display either clockwise or
2. Tighten the two
counter-clockwise.
Phillips head locking
screws (see Step 5,
Page 10).
Tilt Positioning
Rotate the crank handle to tilt
the RTM-L:
Down - Clockwise
Up - Counter-Clockwise
The RTM-L has the ability to tilt 10°
down.
The RTM-L has the ability to tilt
35° up.
1. Once the position has been locked down, use an Allen wrench to take off the crank handle.
2. Once the crank handle has been removed, re-attach the crank handle, but in the opposite direction from
what it was. This is the storage position for the handle.
Installation Instructions
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
RTM-L
Optional Configurations
PSD-EB
PSD-BW
PSD-TS
Technical Specifications
All measurements are in inches (mm).
Page 12
Installation Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
RTM-L Addendum
RTM-L ADDENDUM:
The RTM-L is shipped with the hand crank in the storage position. The hand crank must be removed
in order for the RTM-L to be adjusted. After the adjustments have been made, return the hand crank
to the storage position. If the hand crank is not returned to the storage position, it may cause damage
to the unit or other equipment. Please return the hand crank to the storage position after operation.
Hand Crank
(Qty 1)
5/32”Allen Wrench
(Qty 1)
Storage Position
Loosen the M8 set screw using the 5/32”
Allen wrench. Remove the hand crank.
Operating Position
Once the hand crank has been removed, turn the hand crank
around so that the hand crank knob is pointing away from the
unit. Place the hand crank back onto the unit and tighten the
set screw with the 5/32” Allen wrench.
Hand Crank
Set Screw
Hand Crank
Knob
5/32” Allen Wrench
Storage Position
Slide the hand crank back onto the RTM-L
and tighten the set screw using the 5/32”
Allen wrench.
Page – 13 –
Installation Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
I N S T A L L A T I O N M A N U A L
PSD-SHB Black Shelf
Step 1
Open the box and remove all components.
Step 2
Slide the shelf over the poles, select the desired
height and lock the height by tightening the four
(4) Allen head screws using the hex key.
1
2
Phone: 1300 666 099
www.idt.com.au
Download from Www.Somanuals.com. All Manuals Search And Download.
|