PT-120CM
12.1 Universal Ceiling Mount Monitor
M
MENU
E
EXIT
POWER
AV
OWNER S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
,
Please read this User s Manual in detail and use the set properly.
CAUTION
3
5
INSTALLATION
NAME AND FUNCTION OF EACH PART
Unit
6
6
Remote Control
7
PICTURE CONTROL
CONNECTIONS
8
9
HOW TO OPERATION THE MONITOR
Releasing The Monitor
How To Watch Monitor
SPECIFICATIONS
10
10
10
11
2
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
,
Please read and observe all warnings and instructions in this owner s manual
and those marked on the unit. Retain this booklet for future reference.
There are two kinds of alarm symbols as follows:
The lightening flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of
,
dangerous voltage within the product s enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to
WARNING
people.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the product.
CAUTION
WARNING
Do not mount the product where
Installation of all TV monitors
must be out of the driver s
field of sight.
it will obstruct the deployment of
the airbag or in an area where it
would affect the vehicular control.
Also be careful to avoid mounting
the product where it can become
hazardous during sudden stops or
in the event of an accident.
M
E
N
U
Do not try and service these
products yourself, Seek only
a qualified service center or
factory service center.
Use extra caution with any liquids
in your car. If you or your child
Spills any liquid on these products,
pull your vehicle to the roadside
and turn the key off to disconnect
or wipe the products with a towel. Do not
operate the equipment until all liquids have
either evaporated or you have had the monitor
inspected at a service center by a qualified
technician, Severe harm or danger can
Occur.
Be careful not to drop or
apply under pressure to the
front panel of your video
monitor. If the screen cracks
due to misuse, your warranty
will be void!
Use only a damp cloth to clean
the screen and use only purified
water on the cloth. Wring out all
excess water prior to wiping the
screen. Do not use any cleaners
or chemicals to clean the screen.
In most cases a dry cloth will do!
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
SPECIFICATIONS
CAUTION
Watching the monitor for an
extended period of time
with the engine turned off
may deplete the vehicle s
battery.
Quality installations are best
Power Requirements
Power Consumption
Screen Size
DC 12V
performed by qualified and
certifled installers.
9W
12. 1 TFT-LCD
4:3
Screen Format
Resolution Pixel
A/V Inputs
2400x600
This product is designed for
operation with a 12 Volt DC,
negative ground vehicle. It
is not suitable for operation
under other conditions or
voltages.
2 A/V RCA Inputs
15. 1(L)X13. 9(W)X3. 5(H)inches
Don t touch the unit if there is
a flash of lightning. It may
receive an electric shock.
Dimensions(With shroud)
Dimensions(Without shroud)
IR Power Requirements
14. 8(L)X13. 6(W)X2. 5(H)inches
DC 12V
IR Power Consumption
IR Transmitter Frequency
3W
Do not cover heater ducts or vents.
This may cause a fire or an electric
shock.
Right 2. 8MHz Left 2. 3MHz
LCD Panel Type
Active Matrix TFT
NTSC/PAL Auto Select
Compatible video standard
Note : This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
Check Point
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
1. The operating temperature of this product is limited to 14 F~140 F
(-10 C~60 C).
Your vehicle can reach temperatures up to 100 C in the summertime.
2. When your vehicle is extremely hot or cold you must allow time for your air
conditioner or heater to cool or heat the vehicle and for operating temperatures
to return to normal operating ranges. Your monitor will return to its normal
functions when these operating ranges are achieved.
3. Optimum picture quality is achieved when you are directly in front of the monitor
(+/-45 degrees).
4. If the buttons get stuck, please try to press the up of buttons, it will get back.
It won't impact using normal.
5. If you cann't find the files name in list when playing, please reset units or turn
off/on over again.
6. If the unit cann't be change mode when playing some special files which the
unit didn't support, please reset units or turn off/on over again.
11
4
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
HOW TO OPERATE THE MONITOR
Releasing the Monitor
1. Open the package and check that these items are presents.
Push the open button (located on the front edge of the screen housing)
and lower the monitor to the desired angle. You can also adjust the
swivel angle.
INSTALLATION PLATE
UNIT
SCREW A
SCREW B
Make this arrow in DOWN
direction only.
2. Connect the external compoments to the RCA cable or AV output.
(Refer to the connection diagram on page 9)
PULL BUTTON
3.Match the position of installation bracket and
installation plate with screw A.
How to watch the monitor
1. Connect the monitor to the external devices.
2. Press the POWER button on either the remote control or the unit once to turn
the power on.
Press the same POWER button to turn the power off.
4. Tighten the unit with the supplied
screw B.
POWER
POWER
REMOTE CONTROLLER
UNIT
3. Turn on the external devices and view.
10
5
Download from Www.Somanuals.com. All Manuals Search And Download.
NAME AND FUNCTION OF EACH PART
CONNECTIONS
Unit
Red AUDIO(R)
White AUDIO(L)
Yellow VIDEO
Dome light
Red AUDIO(R)
DVD/VCD/CD/CD-R/CD-RW/MP3
White AUDIO(L)
Yellow VIDEO
DVD/VCD/CD/CD-R/CD-RW/MP3
Reset
P
L
A
Y
/
P
A
U
S
E
P
R
E
V
NEXT
STOP
DVD
REMOTE
AV
EJECT
POWER
A/V INPUT
Reset
P
L
A
Y
/
P
A
U
S
E
P
R
E
V
NEXT
STOP
DVD
REMOTE
AV
EJECT
POWER
A/V INPUT
M
MENU
E
EXIT
POWER
AV
YELLOW
AV Input
(AV 2)
+ 12 V DC Battery
AV Input
(AV 1)
BLACK
RED
Chassis Ground
ACC
Door Trigger
WHITE
Infrared Transmitter
Monitor
(Front)
R
AUDIO
L
VIDEO
RESET
AV2 INPUTS
-
r i T g g e r D o + o r
Monitor
(Rear)
9
6
Download from Www.Somanuals.com. All Manuals Search And Download.
NAME AND FUNCTION OF EACH PART
PICTURE CONTROL
OSD MENU EXIT Button MENU Button
POWER Button
Contrast/Brightness/Color
To adjust CONTRAST, BRIGHTNESS, COLOR press the MENU button until you
arrive at the screen for that item. Use the arrow buttons to adjust the value. Press
the MENU button to make another adjustment or leave the MENU system.
M
E
EXIT
MENU
AV
POWER
1. Bring up the on-screen function menu by pressing the MENU button on the unit
or the remote control.
2. Press the MENU button on the unit or the remote control of monitor until you see
the item you wish to adjust.
3. Use the arrow buttons to adjust the value.
4. Press the MENU button to make another adjustment or leave the MENU system.
Dome Light Button
Dome Light Button
AV Select Button
+/- Buttons
CONTRAST
50
Interface Switch Function
Power Power ON/OFF
BRIGHTNESS
AV
Signal Select
50
Menu Press this button for OSD menu.
And select menu option
COLOR
+
-
Increase current option value.
Decrease current option value.
50
POWER KEY
AV1/AV2 KEY
MENU KEY
+ KEY
- KEY
LCD MONITOR
REMOTE CONTROL UNIT
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|