PD-710/ PD-710T
In-Dash 7 ” Monitor
Touch Screen
DVD/CD/MP3/MP4
AM/FM Radio
Built-in TV tuner
Owner’s Manual
Take the time to read through this owner’s manual.
Familiarity with installation and operation procedures will help you obtain the best
Performance from your new DVD-receiver.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
WIRING CONNECTIONS........................................................................................... 6
REMOTE CONTROL................................................................................................ 10
◆ RADIO PLAYER................................................................................................... 13
◆ DVD PLAYER ...................................................................................................... 14
◆File DISC/USB/SD/MMC interface ........................................................................ 15
◆TV Mode................................................................................................................ 15
◆AV-IN Mode........................................................................................................... 16
◆SETTING CONTROL ............................................................................................ 16
DISPLAY CONTROL................................................................................................ 17
RADIO CONTROL.................................................................................................... 17
GENERAL CONTROL.............................................................................................. 17
SYSTEM INFORMATION......................................................................................... 19
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Package contains the following accessories for installation and operation of the unit.
(1) Washer, Spring
1 each
Washer, M5 Nut
(2) Mounting Strap
(3) Bolt
1
1
(4) Screw4*6
4
2
(5) Mounting Collar
(6) Release Key
(7) Screw 5*20
2
1
Power cable
Speaker cable
Remote Control
Warranty card
User Manual
1x AV-IN Cable
Trim ring 1
Note:
Product image may vary from the actual delivery.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION / UN-INSTALLATION
Note
Before starting installation of the unit, make sure the wiring is connected properly.
Use only the parts provided with the unit to ensure proper installation.
The use of unauthorized parts may cause malfunction.
Install the unit where it does not get in the driver’s way and will not injure the passenger in case
there is a sudden stop, like an emergency stop.
INSTALLATION （Figure 1）
Insert Half Sleeve into dash-board hole and bend mount tabs outwards to fix it
If necessary, place the mount strap at the rear of the unit and fix it with provided washer as
figure 2.
Push the unit into the Half Sleeve until you hear a click sound
Place Trim Ring over the unit and installation is completed as figure 3. (Some vehicle may
not need Trim Ring)
UN-INSTALLATION
Insert the supplied extraction keys into the unit and pull the unit out with keeping the extraction
keys. (as Figure. 4)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
WIRING CONNECTIONS
NOTE: Never connect cable to the system while it is connected to the battery power. Whenever
the unit is disconnected from the battery, the preset memory will be erased and the unit will go
back to its factory defaults.
Note: To watch video the parking wire should be connected to break signal. 2 cables are
connected to a Hands-Free device (not included).
Parking wire
Note: The parking wire is connected with brake signal; for safety, the programs can be seen on
the monitor after braking the car.
Connecting the reversing line to taillight on the
car
After connecting, when you start up the reverse gear, the unit will receive the picture from car
rear view camera.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
-
-
Only use groundless loudspeakers.
Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your loudspeakers at
higher volumes.
-
-
Use 4~8 Ω (Ohm impedance) loudspeakers only; using higher or lesser impedance may damage the unit.
Do not use 3-cable loudspeakers and do not connect the loudspeakers minus to the car body (GND). The
unit is using a BTL circuit and each loudspeaker must be connected with insulated cables according the
diagram.
-
Loudspeaker cables and/or optional external power amplifiers must always be about 30cm away from the
antenna and/or antenna extension parts.
Connect the speakers according the following diagram, incorrect connections will damage the unit or
your loudspeakers
Correct connection
Left front - Right front | Left rear - Right rear
Incorrect connections
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3 VOL+ button
Press to increase volume level.
4. POWER/MUTE Button
Press it to turn on the unit, press it again to turn the unit off.
Short press it to MUTE the volume output, press it again to resume volume when the power is
on.
5. MODE Button
Press it to select the mode: Radio, DISC (if there is a disc in unit), USB (if there is a USB
device in the unit), CARD (if there is a SD/MMC card in the unit), TV (for PD-710T) and AV IN.
6 Band buttons
In Radio mode, press it simply to change radio band in sequence of FM1→ FM2 → FM3 →
AM1 → AM2.
7. USB slot
USB slot, for Multimedia playback files only. Insert a USB into this slot and the unit will
automatically start reading and playback the card. * Supported Music File Format: MP3, WMA
Files
8. AV-in Jack
Put the AV plug into the AV-IN jack which was marked on front panel.
9 Release Button
Press to detach and release the front panel. When the unit released it will switch off
automatically after a few second. Detach/Attach the Panel: Press REL button and pull out the
left side to detach the panel. To attach it, insert the right side first and then press the left side
until hear a click sound.
10. Disc Loading slot
Insert the disc with the printed side facing upward into the slot.
11. Info Display
Information Display LCD when operation the unit.
12. EJECT Button
Press it to eject a disc. If the disc is not removed for about 10 seconds after eject, the disc is
reinserted automatically.
13 RESET Button
Press it with a thin, sharp object. The device will then be reset to factory default settings.
14. Anti-Theft LED
15. SD/MMC Slot: Insert a Memory card.
SD/MMC card slot, for Multimedia playback files only. Insert a SD/MMC CARD into this slot and
the unit will automatically start reading and playback the card. * Supported Music File Format:
MP3, WMA Files]
9
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
1: MODE
2: POWER
3: BAND/RANDOM
4: ENTER
5: UP/DOWN/LEFT/RIGHT
6: EJECT
7: STEREO/MONO
8: P.SCN/RPT
9: BACKWARD/SEEK-
FAST BACKWARD
10: LOUD
11:OSD
12:PBC/STOP
13:Digit numbers
14:Play/Pause
15: MUTE
16:MENU
17:SUBTITLE
18:SETUP
19:ANGLE
20: INT
21: VOLUME PLUS
22: A-B/ZOOM
23: SEL
24: FORWARD/SEEK+
FAST FORWARD
25: VOLUME MINUS
26: AUDIO/GOTO
27: DUAL (Option without function)
28:OPEN/TILT (Option without function)
1. MODE button
Press it to select the mode: Radio, DISC (if there is a disc in unit), USB (if there is a USB
device in the unit), CARD (if there is a SD/MMC card in the unit), TV (For PD-710T) and AV IN.
2. POWER
Power on or off
3. BAND/ RDM button
In Radio mode, press it to change radio band in sequence of FM1→ FM2 → FM3 → AM1 →
AM2. In DVD mode, press it to play randomly.
4. ENTER button
Press it to confirm selection or setting.
5: Cursor / / / buttons
Use the / / / buttons to select the menu item. the title, track or to show next frame.
6. EJECT button
Press it to eject the disc.
7. STEREO/MONO button
Press STEREO button to select STEREO or MONO.
8. P.SCN/ RPT button
In SD CARD/ USB mode, press to repeat REP 1 => REP DIR => REP ALL
In DVD mode, press to start repeat REP OFF=>REP Chapter=>REP Title=>REP Off.
In Radio mode: PS (Preset Scan): Press to scan all preset stations in the memory of the current
band and stay on each memory stations for about 5 seconds.
AS (Auto Save): Long press to save the stations with good reception automatically.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
9. / seek- buttons
In DVD mode, Press button to skip to the previous track. Press and hold button for two
seconds to activate fast reverse (REW) search in a track.
In RADIO mode, press button to start searching automatic, press and hold for two seconds to
start manual searching. button Frequency down.
10. LOUD button
Press to set LOUD on or OFF.
11. OSD button
In DVD mode press it to enter the OSD menu, press and hold for 2 seconds to set video setup.
(HUE / SATURATION / COLOR RESET / BRIGHT / CONTRAST / SHARP / BACK)
12. STOP/PBC button
Press it to Stop playback from the current position, press it again to final stop to the very
beginning. Press PLAY/PAUSE button to play.
Press and hold for two seconds to set PBC on/ off in VCD mode.
13. Digit 0-9 buttons
In radio mode, select 1-6 the desired band; In DVD mode, select track.
14. PLAY/PAUSE button
In DVD mode, press it to pause playback, press again to resume.
15. Mute button
: Short press this button to mute the volume output, press it again to resume volume.
16. MENU button
Press it to show main menu, in DVD mode, long press it to enter TITLE MENU (Enable only if
the DVD disc with title menu).
17. SUBTITLE button
Press it to select the subtitle language (Available only if the disc with subtitle function).
18. SETUP button
In DVD mode press it to enter the setup menu.
19. ANGLE Button
In DVD mode, press it repeatedly to change the viewing angle (Available only with a recorded
DVD file or DVD disc that has this function).
20. INT Button
Press it to activate the intro function. You can play the beginning of every track for 10 seconds
in sequence.
21. VOL+ button
Press to increase volume level.
22. A-B/ZOOM button
During playback, press it at the starting point of section you want to repeat(A), press this button
again at the ending point of the section you want to repeat (B), section A-B repeating starts.
Press it again to cancel the A-B repeat function.
Press it and hold for two seconds in DVD mode to zoom the image in or out in the sequence of
ZOOM 2-> ZOOM 3-> ZOOM 4-> ZOOM 1/2-> ZOOM 1/3-> ZOOM 1/4.
23.SEL button
Press it to enter the SOUND SETTING menu, and press Cursor UP/DN buttons to choose an
item and press cursor left/right buttons to set the item. Press SEL button again to exit the menu.
24. / seek + buttons
In DVD mode, Press button to skip to the next track. Press it and hold button for two
seconds to activate fast forward (FF) search in a track.
In RADIO mode, press button to start searching automatic, press and hold for two seconds to
start manual searching. button Frequency up.
25. VOL- button
Press to decrease volume level.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
26. AUDIO/GOTO button
In DVD mode press it to select the audio language.
In VCD mode, press it to select the sound track in the sequence of MONO L =>MONO R
=>STEREO.
Go to: in DVD mode，press and hold for 2 seconds to show TIME SEARCH menu, select
number and confirm to go to certain position directly. When press button to enter
TITLE/CHAPTER selection mode, select number and confirm to go to certain TITLE or
CHAPTER position directly.
27. DUAL button (Option without function)
28. OPEN/TILT button (Option without function)
REMOVE BATTERY
Note:
The distance may vary according to the brightness of ambient light.
If the remote is not used for an
extended period of time, remove the
battery to prevent possible damage
from battery leakage and corrosion.
Do not place any objects between
the remote control unit and the
sensor on the unit.
Do not drop the remote control onto the floor; it will damage it beyond repair.
Do not use the remote control unit, while simultaneously operating the remote control unit
of any other equipment; they may interfere resulting in improper operation.
The battery normally last for about one year although depending how often the remote
control is used. If the remote control unit isn’t working even when it is operated near the
unit, replace the battery with a new battery of the same make and use only a lithium cell
battery type: CR2025 (3V).
Dispose empty batteries in accordance with your local governmental regulations.
Do not short-circuit, disassemble, heat or dispose of fire or flames the battery.
Keep the battery out of reach of children, should the battery be swallowed, immediately
consult a doctor.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
MAIN MENU
The best way to discover the program is to explore each screen in detail, and to find out how to
move from one to another. Read this chapter for a guided tour.
Unit starts by displaying the Main menu.
This is the root of the screen hierarchy, and you can simply access all features by tapping on
the touch screen buttons.
Tap the corresponding icons to enter a desired mode.
◆ RADIO PLAYER
To start Radio, tap RADIO button on main menu screen.
Mute the sound
Touch this button can choose FM1,FM2, FM3, AM1,AM2.
Touch this button can scan the stations from 1-6, Long Touch it to save the stations with
good reception automatically and scan each station for about 5 seconds
Touch this button to search stations
Touch this button to open manual select station backward
Touch this button to open manual select station forward
Touch this button to search stations
Touch this button to select stereo or mono sound reception
Touch this button to select reception of local station or DX for distance station.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
◆ DVD PLAYER
To start DVD Player, tap on DVD button from main menu screen.
TOUCH SCREEN MENU
You will not see any buttons while DVD is played. Buttons will appear when you tap on TFT
screen. Tap the screen again to hide the buttons.
Insert DVD disc
insert VCD disc
NOTE
1.
DVD Player will automatically start playing when you insert any DVD disc, MEMORY
card or USB device.
2.
3.
Warning displays if the vehicle is moving for driver's safety.
DVD Player will not only play video, but also picture and music files as well.
File Management
DVD mode plays files in a) Disc b) USB c) MEMORY card (main MEMORY card slot in inner
panel).
PLAY/PAUSE button: In DVD mode, press it to pause, press again to start.
STOP button: press it to stop playback.
Press this button to fast reverse (REW) search in a track, FR×2×4×8×20-play will be
display.
Press this button to fast forward (FF) search in a track. FF×2×4×8×20-play will be display.
In DVD mode, touch it can choose Repeat chapter =>repeat title =>repeat off.
In VCD mode, touch it can choose REP 1 => REP DIR => REP ALL
Touch it to select the subtitle language (Available only if the disc with subtitle function)
in DVD mode touch it to select the audio language (Available only if the disc with subtitle
function)；In VCD mode touch it can choose MONO L---MONO R---STEREO.
In VCD mode touch it can choose PBC ON or OFF
14
Download from Www.Somanuals.com. All Manuals Search And Download.
In DVD mode touch it to enter TITLE MENU (Enable only if the DVD disc with title menu).
Touch it to select previous or next track.
/
◆File DISC/USB/SD/MMC interface
When a file disc, USB or a memory card is played, the screen will show following interface:
Mute the sound.
Stop button. Press it to Stop playback from
the current position, press it again to final stop
to the very beginning
Play/pause button. Press it to pause the
track, press again to resume.
Press it button to restart a track,
FR×2×4×8×20-play will be display.
Press it button to skip to the next track.
FF×2×4×8×20-play will be display.
Press it to skip to the previous track.
Press it to skip to the next track.
Press it to activate the intro function. You
can play the beginning of every track for 10
seconds in sequence.
Press it to repeat REP 1 => REP DIR =>
REP ALL
Press it to play track randomly.
Press it to enter previous page.
Press it to enter next page.
Press it to open folder and select desired
folder by touch.
◆TV Mode
To start TV Mode, tap on TV button from main menu screen.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
◆AV-IN Mode
To start AV-IN Mode, tap on AV-IN button from
main menu screen.
Connect the external audio/video signal source to this
unit. Select AV-IN mode in the main menu or by
pressing repeat Mode button on the front panel.
Note: If there is no external video input, the TFT
displays “NO SIGNAL”.
Press the
icon to be back to main menu.
◆SETTING CONTROL
Your device has default system settings. You can customize the settings to suit your
personal needs. Once you change settings, your new settings will remain until you change it
again. To start SETTING, tap it on button from main menu screen.
SOUND CONTROL
Tap SOUND button to show SOUND1 menu.
EQUALIZER Select EQ mode
BASS
TREBLE
Bass up/down
Treble up/down
BALANCE Left/Right Balance Control
FADER
Front/Back Fader Control
Tap
button to show SOUND 2 menu.
BEEP
Keypad sound setting on or
off
LOUDNESS
Set LOUD ON/OFF
SUBWOOFER Set SUBWOOFER ON or
OFF
16
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY CONTROL
Tap DISPLAY button to show DISPLAY menu.
SCREEN Screen setting 16:9, 4:3,FULL
Backlight Backlight setting LOW, MID, HIGH
RADIO CONTROL
Tap RADIO button to show RADIO menu.
Set AREA:EUROPE-U.S.A-SOUTH
AMERICA-RUSSIA
AREA
STEREO Set STEREO ON or OFF
LOCAL
Set LOCAL ON or OFF
GENERAL CONTROL
Tap GENERAL Button to show GENERAL menu.
CLOCK
Set CLOCK display time
DISPLAY
ON or OFF
CLOCK HOUR
Set 24 Hour format or
12Hour format
CLOCK
SETTING
Set CLOCK ADJUST time
DVD SET UP MENU
During the DVD playback, press the SETUP button to enter into the system settings main
menu; press the up or down arrow buttons to move to the highlighted menu item and select one
of the Setup Pages:
17
Download from Www.Somanuals.com. All Manuals Search And Download.
[1]. Subtitle Lang setting:
With this option you can select the preferred language for the subtitles. When the selected
language is recorded on the disc then this language will automatically be shown. If not, the first
language recorded on the disc is displayed.
[2].Audio Lang setting:
With this option you can select the preferred language for the audio output. When the selected
language is recorded on the disc (not all discs have multiple languages recorded) then this
language will automatically be played. If not, the first language recorded on the disc is played.
[3]. DVD Menu Lang setting:
With this option you can select the preferred language for the disc menu. When the selected
language is recorded on the disc then this language will automatically be selected. If not, the
first language recorded on the disc is displayed.
[4] Password:
The password for this unit is initially set to factory default 0000. If you want to change your
password, you need to enter the old password first and confirm it, and enter a new password
and confirm. WARNING: if you forget your password, there is no possibility to reset the
password again. Do not forget your password and write it down or store the password in a safe
place.
[5] Rating / PARENTAL SETUP.
For DVD discs which support the USA rating system, setting up rating control can prevent
children from watching content that might not be suitable for their age. You are asked to enter
the password when you change the rating setting. The default password is 0000.
Code
1.NONE
2.G
Description
Kid safe
General Audiences – ALL ages admitted
PARENTAL GUIDANCE SUGGESTED-Some material may not be suitable fo
r children
3.PG
PARENTS STRONGLY CAUTIONED-Some material may be inappropriate fo
r children under 13
4.PG-13
5.PG-R
6.R
7.NC-17
8. Adult
Restricted, under 17 requires accompanying parent or adult guardian.
RESTRICTED-Under 17 requires accompanying parent or adult guardian
NO ONE 17 AND UNDER ADMITTED
Above 17 Admitted
[6] TV SHAPE:
Set TFT screen mode to the correct ratio:
Three screen ratio modes are available, Normal/PS (4:3 Pan Scan), Normal/LB (4:3 Letterbox)
and Wide (16:9). Different disc formats will display different images depending this setting and
the screen size used.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
[7] NTSC/ PAL:
Select this menu item to set up your preferred video output format. PAL is commonly used in
Europe, NTSC is commonly used in the USA and Japan. Auto is commonly used.
[8] DEFAULT:
Factory reset. Set all values to Factory default
values including memory and preset stations.
SYSTEM INFORMATION
Press SYSTEM button to show the information of
the system. You can view detail system information
including serial number of the software.
CALIBRATION
The calibration of the screen is useful when some
malfunction occur with the touch screen and it
needs adjustment.
CALIBRATION procedure of the touch screen is
described as below: When the target moves to
another position, tap and hold at the center of the
new target. Repeat each time to complete the
calibration process. When the calibration has been
completed, the device switches back to the previous
operating mode and retain the previous setting. If
you press Reset button, the setting will return to
factory setting.
Other functions
Subwoofer
Connect the subwoofer to the unit using sub output (see electrical diagram). Tap MENU on
screen enter into main menu setting choose setting menu. choose SOUND and set subwoofer
ON to enable subwoofer.
Parking
When the car is stopped and the parking brake is working, the screen can display the video
image, otherwise the screen can't display the video image
Back View Camera
This unit is equipped with back view camera output. The camera is used to observe the
situation behind the vehicle when you are backing the car.
Please connect your back view camera with the back car video input. And connect the reverse
wire for back a car with the rear gear light. Rear view camera picture will be enabled when you
are backing the car.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SECTION (For PD-710T only)
Connect a TV antenna to the TV antenna jack of the unit. Select TV mode; press on the center
of the touch screen, and following interface will be display:
1. In TV mode, press the Play/Pause buttons on remote once to enter TV menu setting, or
press touch-screen to choose TV MENU icon to enter TV MENU.
2. Press the / on remote or tap the screen to select one of the setup pages: Auto program
=> Manual program.
3. Press the ENTER button on remote or tap “Auto program or Manual program” on screen to
enter the one of the pages.
4. Press the / on remote buttons or tap relevant option to select the setting.
5. Press ENTER on the remote again to confirm, tap BACK button to return to the setup page.
6. Press the
icon to be back to main menu.
Note: This function is available when TV tuner is connected.
TV MENU
Auto program (Auto seek mode)
System
Select this menu item is to set TV system: NTSC=>PAL=>SECAM, press ENTER button on
remote or tap the screen to select.
Audio
Select this menu item is to set the TV sound system:
When system setting PAL,TV sound system can set B/G=>I=>D/K=>/M/N, press ENTER on
remote or tap the screen button to select.
When system setting SECAM, TV sound system can set B/G=>I=>D/K, press ENTER on
remote or tap the screen button to select.
When system setting NTSC, press button to automatic skip search term.
Search
Select this menu item is to start searching and storing stations automatically.
Manual program (manual seek mode)
Storage
Select this menu item is to set the storage number.
System
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Select this menu item is to set TV system: SECAM => NTSC =>PAL ，press NTER button on
the remote or tap the screen to select.
Audio
Select this menu item is to set the TV sound system:
When system setting PAL, press ENTER on remote or tap the screen button to select TV
sound system: D/K=>M/N=> B/G=> I.
When system setting SECAM, TV sound system B/G=>I=>D/K.
When system setting NTSC, press button to automatic skip TV channel term.
Channel
Select this menu item is to set your desired searching channel, press / button on
remote to select one ,or press
Fine
/
icon to select channel.
Select this menu item is to fine TV tuning and sound until it achieves the best quality,
press / button on remote to adjust.
Memory
Select memory on or off is to set whether memory the searched station or not, press
ENTER on remote or tap the screen button to select.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES ON DISC
Only use groundless loudspeakers.
Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your
loud speakers at higher volumes.
Use 4~8 Ω (Ohm impedance) loudspeakers only; using higher or lesser impedance may
damage the unit.
Do not use 3-cable loudspeakers and do not connect the loudspeakers minus to the car
body.
(GND). using a BTL circuit and each loudspeaker must be connected with insulated cables
according the diagram.
Loudspeaker cables and/or optional external power amplifiers must always be about 30cm.
away from the antenna and/or antenna extension parts.
If want to display for 7” TFT, parking wire must be connected to ground.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Symptom
Cause
Remedy
Replace with fuse of the same amperage.
If the fuse blows again, consult your store
of purchase
Power does not turn
on.
(No sound is
produced.)
Fuse is blown
In correct wiring
Consult your local retailer.
1. Turn off the unit.
2. Remove all wires attached to the
power antenna lead. Check each wire
for a possible short to ground using an
ohm meter.
Power antennal
lead is shorted to
ground excessive
current is required
or remote on the
amplifiers or power
antenna.
No sound output
when operating the
unit with amplifiers
or power antenna
attached.
3. Turn on the unit.
4. Reconnect each amplifier remote wire
to the power antenna lead one by one.
If the amplifiers turn off before all wires
are attached, use an external replay to
provide remote-on voltage (excessive
current required).
Turn off the power, Then press the [no
open] button and remove the DCP. Press
the reset button for about 2 seconds with
a thin rod.
Nothing happens
when buttons are
pressed.
Display is not
Accurate
The microprocessor
has malfunctioned
due to noise, etc.
Panel or main unit
Connectors
are dirty
Wipe the dirt off with a soft cloth
moistened with cleaning alcohol.
Compact disc is
dirty
Compact disc is
heavily scratched
or warped
Clean the compact disc without scratches
Sound is bad directly
after power is turned
on.
Replace with a compact disc without
scratches.
Water droplets may
Sound is bad directly form on the internal
after power is turned lens when the car is
Let it dry for about 1 hour with the power
on.
on.
parked in a humid
place
23
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
SYMPTOM
CAUSE
SOLUTION
IF THE POWER SUPPLY IS PROPERLY
CONNECTED TO THE CAR
ACCESSORY SWITCH THE IGNITION KEY
TO “ACC”.
THE CAR IGNITION IS
NOT ON.
NO POWER
THE FUSE IS BLOWN.
REPLACE THE FUSE.
DISC CANNOT BE
LOADED.
PRESENCE OF DISC
INSIDE THE PLAYER
REMOVE THE DISC IN THE PLAYER
THEN PUT A NEW UPWARD.
INSERT THE COMPACT DISC WITH THE
LABEL FACING
INSERTING THE DISC IN
UPSIDE DOWN.
UPWARD.
COMPACT DISC IS
EXTREMELY DIRTY OR
DEFECTIVE.
CLEAN THE DISC OR TRY TO PLAY A
NEW ONE.
DISC CANNOT BE
READ.
COOL OFF UNTIL THE AMBIENT
TEMPERATURE RETURNS TO
NORMAL.
TEMPERATURE INSIDE
THE CAR IS TOO HIGH.
VOLUME IS IN MINIMUM.
ADJUST VOLUME TO A DESIRED LEVEL.
CHECK WIRING CONNECTION.
NO SOUND
WIRING IS NOT
PROPERLY CONNECTED.
THE BUILT-IN
MICROCOMPUTER IS NOT
OPERATING PROPERLY
DUE TO NOISE.
FRONT PANEL IS NOT
PROPERLY FIX INTO ITS
PLACE.
PRESS THE POWER BUTTON FOR
ABOUT 10 SECONDS
TO RESET THE UNIT.
THE OPERATION
KEYS DO NOT WORK.
THE INSTALLATION
ANGLE IS MORE THAN 30
DEGREES.
ADJUST THE INSTALLATION ANGLE TO
LESS THAN 30
DEGREES.
SOUND SKIPS.
THE DISC IS EXTREMELY
DIRTY OR DEFECTIVE.
CLEAN THE COMPACT DISC/TRY TO
PLAY A NEW ONE.
THE RADIO DOES
NOT WORK, THE
RADIO STATION
AUTOMATIC
SELECTION DOES
NOT WORK.
THE ANTENNA CABLE IS
NOT CONNECTED THE
SIGNALS ARE TOO WEAK. MANUALLY.
INSERT THE ANTENNA CABLE FIRMLY
SELECT A STATION
24
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SPECIFICATIONS
General
Power supply:
11~16V DC
max. 15 A
52W x 4 channels (max)
Current consumption:
Maximum power output:
DVD/SVCD/VCD/HDCD/MP3/MP4/VIDEO/CDDA/Picture
CDCD-R/-RW/DVD±R/±RW playback
Compatible formats:
Dimensions (W x D x H) /
weight:
165*178*50 mm/2 kg
Working temperature
range:
-10℃ - +60℃
ESP function:
10 sec. for Audio CD, 120 sec. for MP3
TFT display
Screen size:
Resolution:
Aspect ratio:
Brightness:
7 inch
480*243 dot
4:3/16:9
400 cd/m2
FM Stereo Radio
Frequency range(EUROPE AREA):
Frequency range(SOUTH AMERICA AREA)
Frequency range(RUSSIA AREA)
87.5 – 108MHz(Step 50KHz)
87.5 – 108MHz(Step 100KHz)
87.5 – 108MHz(Step 50KHz)
65-74MHz(Step 10KHz)
87.5 – 107.9MHz(Step 200KHz)
18
Frequency range(U.S.A AREA)
Preset memory stations:
AM/MW Radio
Frequency range(EUROPE AREA):
Frequency range(SOUTH AMERICA AREA)
Frequency range(RUSSIA AREA)
Frequency range(U.S.A AREA)
Preset memory stations:
522kHz - 1620 KHz(Step 9KHz)
520kHz - 1710 KHz(Step 10KHz)
522kHz - 1620 KHz(Step 9KHz)
530kHz - 1710 KHz(Step 10KHz)
12
Audio specification
Frequency response:
TV Color System
20 Hz-20 KHz
Color system NTSC/ PAL
Specifications are subject to change without notice. Mass and dimension are approximate.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
|