DELTA - TABLESAWS
Delta X5 10” Unisaw
Delta X5 10” Unisaw
• 50” Biesemeyer commercial
• 50” Unifence saw guide
• LEFT-TILT blade
fence
• 3 HP, 1 phase, 230V motor
• Two cast iron wings
• LEFT-TILT blade
• 3 HP, 1 phase, 230V motor
• Two cast iron wings
• Includes: 50 tooth carbide-
blade, right extension table,
steel support legs, miter gauge
& 4” dust connector
• Includes: 50 tooth carbide
blade, right extension table,
steel support legs, miter
gauge & 4” dust connector
• Weight: 642 lbs.
• Weight: 642 lbs.
#36-L31X-U50 ................................................................$1,799.00*
#36-L31X-BC50 ..............................................................$1,849.00*
RIGHT-TILT version of above saw:
RIGHT-TILT version of above saw:
#36-R31X-U50 ................................................................$1,799.00*
#36-R31X-BC50..............................................................$1,849.00*
* Buy this Delta X5 tool and get your choice of a mobile base, a Delta CL144 cordless drill, a
Porter-Cable BN125A brad nailer, a Porter-Cable 690LR router, or $50 after mail-in rebate.
* Buy this Delta X5 tool and get your choice of a mobile base, a Delta CL144 cordless drill, a
Porter-Cable BN125A brad nailer, a Porter-Cable 690LR router, or $50 after mail-in rebate.
Delta X5 10” Unisaw
Delta 10” Unisaw
• 50” Biesemeyer commercial
fence
• 50” Biesemeyer commercial
fence
• LEFT-TILT blade
• RIGHT-TILT blade
• 5 HP, 3 phase, 230/460V
motor
• One cast iron wing
• Includes steel support legs &
miter gauge
• 5 HP, 1 phase, 230V motor
• Two cast iron wings
• Includes: 50 tooth carbide
blade, right extension table,
steel support legs, miter
gauge & 4” dust connector
• Weight: 642 lbs.
• Weight: 544 lbs.
* Shown with optional rt. ext.
table and mobile base
#36-R53L-BC50 ................................................................$2,149.00
LEFT-TILT version of above saw:
#36-L51X-BC50 ..............................................................$2,099.00*
* Buy this Delta X5 tool and get your choice of a mobile base, a Delta CL144 cordless drill, a
Porter-Cable BN125A brad nailer, a Porter-Cable 690LR router, or $50 after mail-in rebate.
#36-L53L-BC50 ................................................................$2,149.00
Right-Tilt Unisaw Accessories
Delta X5 10” Contractor-Style Table Saw
#34-254 . . . . . . . . .Dado insert - right tilt Unisaws only . . . . . . . . . . . . . . . .$23.95
#34-154 . . . . . . . . .Standard table insert - right tilt Unisaws only . . . . .$28.95
#34-453 . . . . . . . . .Molding insert - right tilt Unisaws only . . . . . . . . . . . . .$23.95
#50-355 . . . . . . . . .Dust collector connector - 4” outlet . . . . . . . . . . . . . . .$42.95
#78-852W . . . . . . .Right extension table . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$139.95
#50-289 . . . . . . . . .Delta mobile base for Unisaw with 50” fence . . . . .$179.95
• 30” Biesemeyer commercial
T-Square fence
• RIGHT-TILT blade
• 1-1/2 HP, 1 phase,
115/230V motor
• One cast iron wing
• Includes: 50 tooth carbide
blade, right extension table,
miter gauge, & support legs
• Weight: 295 lbs.
Delta 10” Cabinet Saw
• 50” Delta industrial T-Square
fence
• RIGHT-TILT blade
• 3 HP, 1 phase, 230V motor
• Two cast iron wings
• Includes: 10” carbide blade,
miter gauge & 4” dust port
• Weight 525 lbs.
#36-507X.........................................................................$1,045.00*
* Buy this Delta X5 tool and get your choice of a mobile base, a Delta CL144 cordless drill, a
Porter-Cable BN125A brad nailer, a Porter-Cable 690LR router, or $50 after mail-in rebate.
Optional Accessories
#36-730.............................................................................$1,195.00
#34-254 . . . . . . . . .Dado insert - right tilt Unisaws only . . . . . . . . . . . . . . . .$23.95
#34-154 . . . . . . . . .Standard table insert - right tilt Unisaws only . . . . .$28.95
#34-264 . . . . . . . . .Dado insert for 7” & 8” dado blades . . . . . . . . . . . . . .$22.95
#50-277 . . . . . . . . .Delta mobile base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 89.95
#50-285 . . . . . . . . .Base extension for 30” fence with legs . . . . . . . . . . . . .$59.95
#50-354 . . . . . . . . .Dust collector connector - 4” outlet . . . . . . . . . . . . . . .$31.95
Redmond also has one of the largest selections of
Factory Reconditioned Delta machines in the country.
See pages 11-13 for just some of the
Factory Reconditioned units currently available.
Check us out on the web!
2
Download from Www.Somanuals.com. All Manuals Search And Download.
DELTA - RADIAL ARM SAWS
Delta X5 12” Radial Arm Saw
Delta 18” Radial Arm Saw
• Max. crosscut: 29”
• Max. rip capacity: 41”
• Max. depth of cut: 4-7/8”
• Includes steel blade
• Weight: 745 lbs.
• 2 HP, 1 phase, 230V motor
• Max. crosscut: 14-3/8”
• Max. rip capacity: 24-1/4”
• Max. depth of cut: 3-3/4”
• Unique turret arm action permits
saw blade to rotate 360° above
work table
• Includes steel blade
• Weight: 300 lbs.
#33-420 . . . . . . . . .5 HP, 1 phase, 230V motor . . . . . . . . . . . . . . . . . . . . .$5,899.00
#33-895X ............................................$1,879.00*
#33-421 . . . . . . . . .7-1/2 HP, 3 phase, 230/460V motor . . . . . . . . . . . .$5,655.00
* Buy this Delta X5 tool and get your choice of a mobile base, a Delta CL144 cordless drill, a
Porter-Cable BN125A brad nailer, a Porter-Cable 690LR router, or $50 after mail-in rebate.
Delta 16” Radial Arm Saw
Delta 12” Radial Arm Saw
• Max. crosscut: 29”
• Max. rip capacity: 41”
• Max. depth of cut: 4-1/2”
• Includes steel blade
• Weight: 740 lbs.
• 2 HP, 3 phase, 230/460V motor
• Max. crosscut: 14-3/8”
• Max. rip capacity: 24-1/4”
• Max. depth of cut: 3-3/4”
• Unique turret arm action per-
mits saw blade to rotate 360°
above work table
• Includes steel blade
• Weight: 300 lbs.
#33-410 . . . . . . . . .3 HP, 1 phase, 230V motor . . . . . . . . . . . . . . . . . . . . .$5,189.00
#33-892.................................................$2,285.00
#33-411 . . . . . . . . .5 HP, 3 phase, 230/460V motor . . . . . . . . . . . . . . . .$5,095.00
Delta 10” Radial Arm Saw
• 1-1/2 HP, 1 phase, 115/230V
motor
• Max. crosscut: 16”
• Max. rip capacity: 26-1/2”
• Max. depth of cut: 2-3/4”
• Includes steel blade
• Weight: 166 lbs.
Delta 14” Radial Arm Saw
• Max. crosscut: 29”
• Max. rip capacity: 41”
• Max. depth of cut: 4”
• Includes steel blade
• Weight: 725 lbs.
#33-400 . . . . . . . . .3 HP, 1 phase, 230V motor . . . . . . . . . . . . . . . . . . . . .$5,099.00
#RS830 .................................................................................$749.00
#33-401 . . . . . . . . .5 HP, 3 phase, 230/460V motor . . . . . . . . . . . . . . . .$4,799.00
Optional Accessories
Optional Accessories
#78-980 . . . .Biesemeyer radial arm table set, 8’L x 6’R x 12” wide . . . .$599.95
#78-981 . . . .Biesemeyer radial arm table set, 8’L x 6’R x 16” wide . . . .$609.95
#33-619 . . . .4’ long roller extension table w/ (4) 18” wide rollers . . . . .$299.95
#50-283 . . . .Delta Mobile Base for RS830 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.95
#33-967 . . . .Moulding/shaping guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$259.95
#34-813 . . . .Heavy-duty moulding cutterhead & knife set . . . . . . . . . . .$159.95
#33-723 . . . .Cutterhead return attachment . . . . . . . . . . . . . . . . . . . . . . . . . .$129.95
#733594 . . . .Retractable leaf guard for 12” radial arm saw . . . . . . . . . . . . .$92.95
#50-291 . . . .Dust hood for 12” radial arm saw . . . . . . . . . . . . . . . . . . . . . . . .$87.95
#78-980 . . . .Biesemeyer radial saw table set, 8’L x 6’R x 12” wide . . . . .$599.95
#78-981 . . . .Biesemeyer radial saw table set, 8’L x 6’R x 16” wide . . . . .$609.95
#33-619 . . . .4’ long roller extension table w/ (4) 18” wide rollers . . . . .$299.95
#733471 . . . .Retractable leaf guard for 18” radial arm saw . . . . . . . . . . .$187.95
#733456 . . . .Retractable leaf guard for 16” radial arm saw . . . . . . . . . . .$187.95
#733449 . . . .Retractable leaf guard for 14” radial arm saw . . . . . . . . . . .$187.95
#50-291 . . . .Dust hood for 18”, 16”, & 14” radial arm saws . . . . . . . . . . . . .$87.95
#733814 . . . .Blade flange for dado - for 18” radial arm saw only . . . . . . .$59.95
Check us out on the web!
4
Download from Www.Somanuals.com. All Manuals Search And Download.
DELTA - MITER SAWS
Delta 12” Dual Bevel Compound Miter Saw
• Front bevel lock for making quick and accu-
rate compound cuts
Delta 12”TwinLaser Compound Miter Saw
• Bright laser cut lines clearly indicate both
sides of the blade kerf
• 15 AMP, 120V motor
• 15 AMP, 120V motor
• Crosscuts: 2-1/2” x 8” @ 90°
2-1/2” x 5-3/4” @ 45° miter
2-1/2” x 6-1/2” @ 45° bevel (L)
• 1” arbor
• Crosscuts: 2-1/2” x 9” @ 90°
2-1/2” x 6-1/2” @ 45° miter
1-1/2” x 9-1/4” @ 45° bevel (L)
• 1” arbor
• Electric brake
• Electric brake
• Includes: 60 tooth carbide blade, dust bag
• Weight: 63 lbs.
• Includes: 40 tooth carbide blade,
dust bag
• Weight: 63 lbs.
#36-412 ......................$419.95
#36-255L ....................$369.95
Delta 12” Compound Miter Saw
• Large rear cutout for cutting up to 7-1/2”
crown molding or 6-1/2” baseboard
• 15 AMP, 120V motor
• Crosscuts: 2-1/2” x 8” @ 90°
2-1/2” x 5-3/4” @ 45° miter
2-1/2” x 6-1/2” @ 45° bevel (L)
• 1” arbor
Delta Shopmaster 10” Miter Saw
• 13 AMP, 120V motor
• Crosscuts: 2-1/4” x 5-3/4” @ 90°
2-1/4” x 4-1/8” @ 45°
• Electric Brake
• 5/8” arbor
• Includes: 40T carbide blade
• Weight: 28 lbs.
• Electric brake
• Includes: 40 tooth carbide blade, dust bag
• Weight: 46 lbs.
#MS210.........................$99.95
#36-312 ......................$319.95
Universal Miter Saw Table Systems
Delta Universal Miter Saw Stand
This system will make most motorized miter saws
more accurate, more productive, and more economical
to use. Features include saw dust slot to eliminate
build-up of dust and chips. Accessory inside
and outside miter stops are available.
Purchase table for right side, left side,
or both. Measuring tapes not
• Versatile mounting rails accommodate any manu-
facturers miter saw, compound miter saw or dual
compound slide saw
• Aluminum fence and table extension
with stock stop simplify repetitive cut-off
work
(saw not included)
• Adjustable roller work supports will han-
dle extra-long stock
included.
• Rugged 13” diameter wheels maneuver easily
around the job site even up and down steps
(saw not included)
#50-155 ......................$245.95
#78-804 . . . . . . . . .4’ miter table for 10” saws . . . . . . . . . . . . . . . . . . . . . . .$129.95
#78-806 . . . . . . . . .6’ miter table for 10” saws . . . . . . . . . . . . . . . . . . . . . . .$159.95
#78-808 . . . . . . . . .8’ miter table for 10” saws . . . . . . . . . . . . . . . . . . . . . . .$209.95
#79-803 . . . . . . . . .3’ miter table for 12” saws or 10” silde saws . . . . .$114.95
#79-804 . . . . . . . . .4’ miter table for 12” saws or 10” slide saws . . . . .$149.95
#79-806 . . . . . . . . .6’ miter table for 12” saws or 10” slide saws . . . . .$179.95
#79-808 . . . . . . . . .8’ miter table for 12” saws or 10” slide saws . . . . .$229.95
Adhesive-Backed Measuring Tapes
Precision steel, ready to mount on
cut-off fences, table saws, or work
benches. Tapes can be easily cut to
shorter lengths. In 6’ or 12’ lengths,
1/2” or 3/4” wide, reading left-to-
right or right-to-left.
T-Square Cut-Off Saw Stop
To eliminate the need for cumbersome
C-clamps and hand-held tapes. Precise
to 1/64”. Dual pointer for use on
either side of machine. Works with
fences from 1-1/2” to 2” wide. Does
not include adhesive-backed measur-
ing tape.
#79-056 . . . . . . . . . . . . . . . . .12’R 1/2” Metric/English . . . . . . . . . . . . . . . . . .$13.95
#79-057 . . . . . . . . . . . . . . . . .12’L 1/2” Metric/English . . . . . . . . . . . . . . . . . . .$13.95
#79-061 . . . . . . . . . . . . . . . . .12’R 1/2” English . . . . . . . . . . . . . . . . . . . . . . . . . .$13.95
#79-062 . . . . . . . . . . . . . . . . .12’L 1/2” English . . . . . . . . . . . . . . . . . . . . . . . . . .$13.95
#79-065 . . . . . . . . . . . . . . . . .12’R 3/4” English . . . . . . . . . . . . . . . . . . . . . . . . . .$18.95
#79-066 . . . . . . . . . . . . . . . . .12’L 3/4” English . . . . . . . . . . . . . . . . . . . . . . . . . .$18.95
#79-068 . . . . . . . . . . . . . . . . .6’R 3/4” English . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.95
#79-070 . . . . . . . . . . . . . . . . .6’L 1/2” English . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.95
#78-989 . . . . . . . . .Dual pointer cut-off saw stop . . . . . . . . . . . . . . . . . . . . . .$97.95
#78-992 . . . . . . . . .Dual pointer flip stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.95
Monday - Friday
8:00am to 5:00pm Eastern Time
5
Order Toll Free! 1-800-428-9898
Download from Www.Somanuals.com. All Manuals Search And Download.
DELTA - BANDSAWS
Delta X5 14”Woodcutting Band Saw
• 1-1/2 HP, 1 phase, 115/230V motor
• Blade speed: 3,000 SFPM
• 6-1/4” height capacity
• 3/4” max blade width
• 93-1/2” blade length
• One 4” dust chute outlet
• Includes Quick release tension lever
• Weight: 275 lbs.
Delta 18”Woodcutting Band Saw
• 2 HP, 1 phase, 230V motor
• Blade speed: 3,200 SFPM
• 12” height capacity
• 1-1/4” max blade width
• 136” blade length
• Two 4” dust chute outlets
• Includes rip fence
• Weight: 397 lbs.
#28-682 ..................................$1,249.00
#28-475X................................................$899.00*
* Buy this Delta X5 tool and get your choice of a mobile base, a Delta CL144 cordless drill, a
Porter-Cable BN125A brad nailer, a Porter-Cable 690LR router, or $50 after mail-in rebate.
Delta 14”Woodcutting Band Saw
• 1 HP, 1 phase, 120V motor
• Two blade speeds: 2,500 / 3,300 SFPM
• 6-1/4” height capacity
• 3/4” max blade width
• 93-1/2” blade length
• One 4” dust chute outlet
• Includes Quick release tension lever
• Weight: 201 lbs.
Delta 14”Woodcutting Band Saw
• 3/4 HP, 1 phase, 115V motor
• Blade speed: 3,300 SFPM
• 6” height capacity
• 3/4” max blade width
• 93-1/2” blade length
• One 4” dust chute outlet
• Includes Quick release tension lever
• Weight: 201 lbs.
#28-276....................................................$419.00
#28-206 .....................................$614.95
Optional Accessories:
Optional Accessories:
#50-941 . . . . . . . . .Delta mobile base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$63.63
#34-895 . . . . . . . . .Miter gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.95
#28-984 . . . . . . . . .Height attachment, increases to 12-1/4”
. . . . . . . . . . . . . . . . .under the guide. Must use 105” blades . . . . . . . . . .$109.95
#50-941 . . . . . . . . .Delta mobile base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$63.95
#25-858 . . . . . . . . .Lamp attachment (bulb not included) . . . . . . . . . . . . .$43.95
#28-856 . . . . . . . . .Rip fence with 12” rip capacity . . . . . . . . . . . . . . . . . . .$109.95
#28-858 . . . . . . . . .Rip fence with 24” rip capacity . . . . . . . . . . . . . . . . . . .$135.95
Delta 14” Metal/Wood Cutting
Band Saw
• 1-1/2 HP, 1 phase, 115V motor
• Eight cutting speeds from 40 to 3,000 SFPM
• 6-1/4” capacity under guide
• 16” x 16” tilting table
• Blade length: 93-1/2”
• 1/8” to 3/4” blade widths
• Weight: 224 lbs.
Circle Cutting Attachment
Attaches to most band saws with 3/8” x 3/4”
miter grooves to provide professional circle cut-
ting capability. Cut perfect circles from 3” to 50”
in diameter. Features all-metal construction, stur-
dy support leg, and extension wings for extra
support of large diameter circles.
#28-197 . . . . . . . . .Circle Cutting Attachment . . . . . . . . . . . . . . . . . . . . . . . . .$92.95
#28-348.............................................................................$1,889.00
Magnetic Work Light
Optional Accessories:
Illuminate your work! The powerful magnetic base
adheres to any steel surface providing extra light in
hard-to-reach work areas. Features include a flexible
14” arm and an extra-long 8’ cord. Uses up to a 50-
watt track light bulb (not included).
#34-895 . . . . . . . . .Miter gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.95
#28-984 . . . . . . . . .Height attachment, increases to 12-1/4”
. . . . . . . . . . . . . . . . .under the guide. Must use 105” blades . . . . . . . . . .$109.95
#50-274 . . . . . . . . .Delta mobile base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$95.95
#25-858 . . . . . . . . .Lamp attachment (bulb not included) . . . . . . . . . . . . .$43.95
#28-856 . . . . . . . . .Rip fence with 12” rip capacity . . . . . . . . . . . . . . . . . . .$109.95
#28-858 . . . . . . . . .Rip fence with 24” rip capacity . . . . . . . . . . . . . . . . . . .$135.95
#25-869 . . . . . . . . .Magnetic Work Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.95
Check us out on the web!
Download from Www.Somanuals.com. All Manuals Search And Download.
6
DELTA - SHAPERS & WOOD LATHES
Delta X5 Heavy Duty Shaper
• 3 HP, 1 phase, 230V motor
• 2 spindle speeds, 7,000 & 10,000 RPM
• Reversing
• 3/4” spindle
• Extra large, 27” x 40” table
• Miter slot
Delta Heavy Duty Shaper
• 2 spindle speeds, 7,000 & 10,000 RPM
• Reversing
• 1-1/4” fixed spindle
• Extra large, 27” x 40” table
• Miter slot
• Weight: 456 lbs.
• Weight: 436 lbs.
#43-495X..............................$1,749.00*
#43-455 . . . . . . . . .5 HP, 1 phase, 230V motor . . . . . . . . . . . . . . . . . . . . . . . .$1,899.00
#43-460 . . . . . . . . .5 HP, 3 phase, 230/460V motor . . . . . . . . . . . . . . . . . . .$2,109.00
* Buy this Delta X5 tool and get your choice of a mobile base, a Delta CL144 cordless drill, a
Porter-Cable BN125A brad nailer, a Porter-Cable 690LR router, or $50 after mail-in rebate.
Optional Shaper Accessories
Delta Heavy Duty Shaper
• 5-Speeds; 3000, 4000, 6000, 8000 &
10,000 rpm
#50-273 . . . . . . . . .Delta mobile base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$95.95
#43-188 . . . . . . . . .Delta Sliding Shaper Jig . . . . . . . . . . . . . . . . . . . . . . . . . . .$124.95
#34-895 . . . . . . . . .Miter Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68.95
#43-808 . . . . . . . . .1” Spindle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$169.95
#43-800 . . . . . . . . .Router chuck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$169.95
• Reversing
• Spindle diameters, 3/4” & 1-1/4”
• Max. height above table
• With 3/4” spindle - 7”
• With 1-1/4” spindle - 9”
• Capacity under nut
• With 3/4” spindle - 3-7/8”
• With 1-1/4” spindle - 4-7/8”
• Sliding table with 37-1/2” of travel
• Automatic spindle brake
Delta Shopmaster 10” 6-Speed
Mini Wood Lathe
• 1/2 HP, 1 phase, 115V motor
• 6-Speeds: 500, 800, 1,250, 1,800,
2,650, & 3,700 RPM
• 14-1/2” between centers
• 37” between centers with optional
bed extension
#43-792 . . . . . . . . .7.5 HP, 3 phase, 230/460V motor . . . . . . . . . . . . . . . . .$5,260.00
#43-791 . . . . . . . . .Same as above without sliding table . . . . . . . . . . . . .$4,572.00
• 1”x8 spindle thread
• Includes: spur center, 3” face plate,
6” tool rest, & knockout bar
• Weight: 85 lbs.
Delta 16”VS Wood Lathe
#LA200 .................................................................................$299.95
• 1-1/2 HP, 1 phase, 120V motor
• 3 speed settings: 0-1,100, 0-2,200,
& 0-3,200 RPM
Optional Accessories
#46-855 . . . .Bed extension (increases to 37” between centers) . . . . . .$56.95
• 42” between centers
• 1-1/4”x8 spindle threads
• Includes: drive center, live center, 4”
face plate, 12” tool rest, & knockout
bar
Delta X5 16”VS Wood Lathe
• 2 HP, 1 phase, 120V motor
• 3 speed settings: 0-1,100, 0-2,200, & 0-
3,200 RPM
• Weight: 354 lbs.
• 42” between centers
• 1-1/4”x8 spindle threads
• Includes: drive center, live center, 4” face
plate, 12” tool rest, & knockout bar
• Weight: 354 lbs.
#46-745.............................................................................$1,999.00
Delta Lathe Duplicator
• Includes basic unit with alu-
minum bed and carriage, hard-
ware for mounting to Delta 12”
Lathes, high-speed steel cutter
and instruction manual.
• 36” Max duplicating length
• 36” Max duplicating diameter
• Rack and pinion drive system
#46-765X ..............................................$1,999.00
* Buy this Delta X5 tool and get your choice of a mobile base, a Delta CL144 cordless drill, a
Porter-Cable BN125A brad nailer, a Porter-Cable 690LR router, or $50 after mail-in rebate.
Optional Lathe Accessories
#25-857 . . . .Lamp attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$56.95
#46-896 . . . .Lathe guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$284.95
#46-408 . . . . . . . . .Delta lathe duplicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$645.95
Monday - Friday
8:00am to 5:00pm Eastern Time
7
Order Toll Free! 1-800-428-9898
Download from Www.Somanuals.com. All Manuals Search And Download.
DELTA - JOINTERS & PLANERS
Delta X5 6” Jointer
Delta X5 8” Jointer
• 1-1/2 HP, 1 phase, 120/240V
motor
• 1 HP, 1 phase, 120/240V motor
• 3 knife cutterhead
• 3 knife cutterhead
• Table length 76-1/2”
• Cutterhead Speed: 5,500 RPM
• Weight: 394 lbs.
• Table length 46”
• Cutterhead Speed: 4,800 RPM
• Weight: 225 lbs.
#37-365X ...............$1,669.00*
#37-275X ..................$579.00*
* Buy this Delta X5 tool and get your choice of a mobile base, a Delta CL144 cordless drill, a
Porter-Cable BN125A brad nailer, a Porter-Cable 690LR router, or $50 after mail-in rebate.
* Buy this Delta X5 tool and get your choice of a mobile base, a Delta CL144 cordless drill, a
Porter-Cable BN125A brad nailer, a Porter-Cable 690LR router, or $50 after mail-in rebate.
Optional Accessories:
Optional Accessories:
#37-355 . . . . . . . . .Set of 3 HSS 8” replacement knives . . . . . . . . . . . . . . . .$89.95
#37-658 . . . . . . . . .Set of 3 HSS 6” replacement knives . . . . . . . . . . . . . . . .$59.95
#50-276 . . . . . . . . .Delta mobile base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$95.95
#50-333 . . . . . . . . .Delta mobile base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$95.95
Delta X5 15” Planer
Delta 8”Professional Jointer
• 1-1/2 HP, 1 phase, 120/240V motor
• 3 knife cutterhead
• Table length 72-3/4”
• Cutterhead Speed: 5,600 RPM
• Weight: 414 lbs.
• 3 knife cutterhead
• 3 HP, 1 phase, 230V motor
• 2 Feed speeds: 16 & 30 FPM
• Cutterhead speed: 5,000 RPM
• 6-1/2” max planing thickness
• 12” min planing length
• Includes steel stand with exten-
sion rollers
• Weight: 340 lbs.
#22-780X..............................$1,239.00*
#37-380 ...........................................................................$1,099.00*
* Buy this Delta X5 tool and get your choice of a mobile base, a Delta CL144 cordless drill, a
Porter-Cable BN125A brad nailer, a Porter-Cable 690LR router, or $50 after mail-in rebate.
Optional Accessories:
Optional Accessories:
#37-307 . . . . . . . . .Set of 3 HSS 8” replacement knives . . . . . . . . . . . . . . . .$75.95
#22-677 . . . . . . . . .Set of 3 HSS 15” replacement knives . . . . . . . . . . . . .$129.95
#22-678 . . . . . . . . .Dust hood, 4-7/8” outside diameter . . . . . . . . . . . . . . .$33.95
#50-324 . . . . . . . . .Delta mobile base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$95.95
#50-296 . . . . . . . . .Delta mobile base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$95.95
Delta 13”Two-Speed Portable Planer
• 2 knife cutterhead
• 15 AMP, 120V motor
• 2-speed material feed rate system:
• Dimensioning speed (30 FPM)
to quickly reach desired thick-
ness
Delta Shopmaster 12-1/2” Portable Planer
• 2 knife cutterhead
• 15 AMP, 120V motor
• One feed speed: 26 FPM
• Cutterhead speed: 8,000 RPM
• 6” max planing thickness
• Cutterhead lock helps reduce snipe
• Includes stand
• Finishing speed (20 FPM) for
an ultra smooth surface on final
pass
• Cutterhead speed: 10,000 RPM
• 6-1/2” max planing thickness
• Cutterhead lock helps reduce snipe
• Weight: 97 lbs.
• Weight: 65 lbs.
#TP400LS ..................................$345.00
#22-580 .....................................$449.00
Optional Accessories for TP400LS:
Optional Accessories for 22-580:
#22-549 . . . . . . . . .Set of 2 HSS 13” replacement knives . . . . . . . . . . . . . .$44.95
#50-446 . . . . . . . . .Reversible dust hood with 4” port . . . . . . . . . . . . . . . . .$25.95
#50-326 . . . . . . . . .Planer stand to convert to floor model unit . . . . . . . .$59.95
#22-563 . . . . . . . . .Replacement drive belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.95
#22-562 . . . . . . . . .Set of 2 HSS 12-1/2” replacement knives . . . . . . . . . .$37.95
#50-445 . . . . . . . . .Dust hood with 4” outlet . . . . . . . . . . . . . . . . . . . . . . . . . .$17.95
#22-563 . . . . . . . . .Replacement drive belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.95
#50-322 . . . . . . . . .Universal planer stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.95
Check us out on the web!
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DELTA - DRILLING MACHINES
Delta 13-Spindle Single Row Line Drill
• 3/4 HP, 1 phase, 115V motor
• 32mm spindle centers
Delta Hollow Chisel Mortiser
• 1/4” to 1/2” chisel capacity
• 5/8” chisel shank capacity
• 5” maximum chisel stroke
• 13-1/2” x 16-1/4” table size
• 3/8” chuck capacity
• (1) 13-spindle drill head
• 7-right hand & 6-left hand, 10mm fixed collets
• Top-down drilling for easy visibility
• Manually operated
• Spindle speed: 1725 RPM
• 1/2 HP, 1 phase, 120V motor
• Includes riser block and four mortising
chisels & bits
• Panel indexing pins
• 30” back fence with (2) stops
• Telescoping handle extends
from 16” to 23” for increased
* Shown with optional
stand and tooling
• Weight: 55 lbs.
leverage
• Tooling not included
• Weight: 108 lbs.
#14-651 ...........................................$269.00
Mortising Chisel and Bit Sets
#32-325.................................................$1,095.00
Delta Professional Quality Chisel & Bit Sets
For use with mortising attachments or dedicated mortis-
ers. Includes one chisel and one bit. Chisels have 5/8”
shank. Drill bits are 7” long.
Optional Accessories
#32-331 . . . . . . . . .Steel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$179.95
5
#17-908 . . . . . . . . . . . . . . .1/4” x 1/4” bit set . . . . . . . . . .$44.95
#17-909 . . . . . . . . . . . . . . .5/16” x 5/16” bit set . . . . . . . .$44.95
#17-910 . . . . . . . . . . . . . . .3/8” x 3/8” bit set . . . . . . . . . .$48.95
#17-911 . . . . . . . . . . . . . . .1/2” x 1/2” bit set . . . . . . . . . .$54.95
Delta X 16-1/2”VS Floor Model
Drill Press
• 3/4 HP, 1 phase, 120/240V motor
• Two variable speed ranges:
150 to 1,100 RPM
Delta 16-1/2” 16-Speed Floor
Model Drill Press
500 to 3,200 RPM
• 1/2” chuck size
• 6” spindle travel
• 14 x 14” table
• 3/4 HP, 1 phase, 115/230V motor
• Speed range: 215 to 2,720 RPM
• 5/8” chuck size
• Weight: 230 lbs.
• 4-7/8” spindle travel
• 14” x 14” table
• Weight: 195 lbs
#17-990X................................................$829.00*
* Buy this Delta X5 tool and get your choice of a mobile base, a Delta CL144 cordless drill, a
Porter-Cable BN125A brad nailer, a Porter-Cable 690LR router, or $50 after mail-in rebate.
Delta 20” 9-Speed Floor Model
Drill Press
#17-965....................................................$429.00
Optional Accessories
#17-935 . . . . . . . . .Mortising Attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.95
#17-924 . . . . . . . . .Deluxe mortising attachment w/ 4 bit set . . . . . . . . .$79.95
• 1 HP, 1 phase, 115/230V motor
• Speed range: 150 to 2,200 RPM
• 5/8” chuck size
• 4-3/4” spindle travel
• 18-3/8” x 16-1/8” production table
• Weight: 345 lbs.
Delta 16-1/2”VS Floor Model Drill Press
• 3/4 HP, 1 phase, 120/240V motor
• Variable speed range: 200 to 2,500 RPM
• 1/2” chuck size
• 6” spindle travel
• 14 x 14” table
• Includes Work lamp and tool tray
• Weight: 230 lbs.
#70-200 ..................................................$699.00*
Redmond also has one of the largest selections of
Factory Reconditioned Delta machines in the country.
See pages 11-13 for just some of the
Factory Reconditioned units currently available.
#17-968....................................................$519.00
Monday - Friday
8:00am to 5:00pm Eastern Time
9
Order Toll Free! 1-800-428-9898
Download from Www.Somanuals.com. All Manuals Search And Download.
DELTA - DUST MANAGEMENT
Delta 3 HP Dust Collector
Delta 2 HP Dust Collector
• 2 HP, 1 phase, 230V motor
• 1,500 CFM
• Three 4” connections
• 5 micron bag filtration
• Weight: 175 lbs.
• 2,100 CFM
• One 8” or four 4” connections
•5 micron bag filtration
• Weight: 200 lbs.
3 HP, 1 phase, 220V motor
#50-853 .....................................$729.00
3 HP, 3 phase, 220V motor
#50-852 .....................................$729.00
#50-851 .....................................$525.00
Optional Accessories:
Optional Accessories:
#50-532 . . . . . . . . .5 micro top bag for 50-852 & 50-853 . . . . . . . . . . . . . . . .$82.95
#50-836 . . . . . . . . .1 micron upper filter bag for 50-852 & 50-853 . . . . . . .$64.95
#50-837 . . . . . . . . .1 micron lower filter bag for 50-852 & 50-853 . . . . . . . .$64.95
#50-838 . . . . . . . . .30 micron lower filter bag for 50-852 & 50-853 . . . . . .$26.95
#50-839 . . . . . . . . .30 micron upper filter bag for 50-852 & 50-853 . . . . . .$35.95
#50-366 . . . . . . . . .6mm plastic chip bag for 50-852 & 50-853 . . . . . . . . . . .$19.95
#50-363 . . . . . . . . .5 micron top bag for 50-851 . . . . . . . . . . . . . . . . . . . . . . . .$49.95
#50-365 . . . . . . . . .6mm plastic chip bag for 50-851 . . . . . . . . . . . . . . . . . . . .$16.95
#50-832 . . . . . . . . .1 micron upper filter bag . . . . . . . . . . . . . . . . . . . . . . . . . . .$65.95
#50-833 . . . . . . . . .1 micron lower filter bag . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.95
#50-835 . . . . . . . . .30 micron top bag for 50-851 . . . . . . . . . . . . . . . . . . . . . . .$49.95
Delta Shopmaster 1 HP Dust Collector
• 1 HP, 1 phase, 115/230V motor
• 650 CFM
Delta 1-1/2 HP Dust Collector
• 1-1/2 HP, 1 phase, 115/230V motor
• 1,200 CFM
• Two 4” connections
•5 micron bag filtration
• Weight: 100 lbs.
• One 4” connector
• Includes: 4” diameter 5’ hose
• 5 micron bag filtration
• Weight: 90 lbs.
#AP400......................................$159.00
#50-850 .....................................$295.00
Optional Accessories:
Optional Accessories:
#50-367 . . . . . . . . .5 micron upper or lower bag for AP400 . . . . . . . . . . . . .$76.95
#50-841 . . . . . . . . .30 micron replacement bag for 50-840 . . . . . . . . . . . . . .$37.95
#50-843 . . . . . . . . .5 micron top bag for 50-480 . . . . . . . . . . . . . . . . . . . . . . . .$26.95
#50-830 . . . . . . . . .1ea. upper bag, 1ea. lower bag, 1 micron . . . . . . . . . . . .$99.95
#50-362 . . . . . . . . .5 micron filter bag for 50-850 . . . . . . . . . . . . . . . . . . . . . . .$32.95
#50-364 . . . . . . . . .6mm plastic chip bag for 50-850 . . . . . . . . . . . . . . . . . . . .$14.95
Delta Shopmaster Air Cleaner
with Work Light
Delta 3-Speed Air Cleaner
• 1/5 HP, 1 phase, 115V motor
• 3 speeds
• CFM: 540, 730, & 1,200
• Filter cycle: 20’x20’x8’ room: 10,
14, & 22 times an hour
• Includes remote control
• Weight: 50 lbs.
• 3 AMP, 1 phase, 120V motor
• 400 CFM
• Filter system includes coarse pre-fil-
ter, 5 micron inner filter.
• Uses 2ea 18” x 1” dia bulbs (Not
Included)
• Weight: 40 lbs.
#50-875 ................................................................................$275.00
#AP100.................................................................................$189.00
Optional Accessories:
#50-857 . . . . . . . . .Charcoal filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$47.95
#50-858 . . . . . . . . .Pleated outer filter (2 pack) . . . . . . . . . . . . . . . . . . . . . . . . .$25.95
#50-859 . . . . . . . . .3 pocket inner filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.95
#50-865 . . . . . . . . .Electrostatic outer filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.95
Larger dust collection systems also available.
Contact a Redmond sales representative for
more information.
Check us out on the web!
10
Download from Www.Somanuals.com. All Manuals Search And Download.
DELTA - FACTORY RECONDITIONED
Delta X5 10” Unisaw
Delta X5 10” Unisaw
• 50” Biesemeyer commercial
fence
• LEFT-TILT blade
• 3 HP, 1 phase, 230V motor
• Two cast iron wings
• Includes: 50 tooth carbide-
blade, right extension table,
steel support legs, miter gauge
& 4” dust connector
• 50” Unifence saw guide
• LEFT-TILT blade
• 3 HP, 1 phase, 230V motor
• Two cast iron wings
• Includes: 50 tooth carbide
blade, right extension table,
steel support legs, miter
gauge & 4” dust connector
• Weight: 642 lbs.
• Weight: 642 lbs.
#36-L31X-U50 (Factory Reconditioned) .....................$1,449.00*
#36-L31X-BC50R (Factory Reconditioned) ..................$1,499.00
RIGHT-TILT version of above saw:
RIGHT-TILT version of above saw:
#36-R31X-U50 (Factory Reconditioned).....................$1,449.00*
#36-R31X-BC50R (Factory Reconditioned) ..................$1,499.00
Delta X5 12” Radial Arm Saw
Delta 10” Radial Arm Saw
• 1-1/2 HP, 1 phase, 115/230V motor
• Max. crosscut: 16”
• Max. rip capacity: 26-1/2”
• Max. depth of cut: 2-3/4”
• Includes steel blade
• 2 HP, 1 phase, 230V motor
• Max. crosscut: 14-3/8”
• Max. rip capacity: 24-1/4”
• Max. depth of cut: 3-3/4”
• Unique turret arm action permits
saw blade to rotate 360° above
work table
• Weight: 166 lbs.
• Includes steel blade
• Weight: 300 lbs.
#RS830R (Factory Reconditioned)........$599.00
#33-895X (Factory Reconditioned) .$1,529.00*
Delta X5 Heavy Duty Shaper
• 3 HP, 1 phase, 230V motor
• 2 spindle speeds, 7,000 & 10,000 RPM
• Reversing
Delta 12” Radial Arm Saw
• 2 HP, 3 phase, 230/460V motor
• Max. crosscut: 14-3/8”
• 3/4” spindle
• Extra large, 27” x 40” table
• Miter slot
• Weight: 436 lbs.
• Max. rip capacity: 24-1/4”
• Max. depth of cut: 3-3/4”
• Unique turret arm action permits saw
blade to rotate 360° above work table
• Includes steel blade
• Weight: 350 lbs.
#43-495XR (Factory Reconditioned).............................$1,399.00
#33-892R (Factory Reconditioned).$1,8599.00
Delta Heavy Duty Shaper
• 2 spindle speeds, 7,000 & 10,000 RPM
• Reversing
• 1-1/4” fixed spindle
• Extra large, 27” x 40” table
• Miter slot
Don’t see the machine
you’re looking for?
• Weight: 456 lbs.
We can special order
any machine or accessory from
the manufacturers
we represent.
#43-455R . . . . . . . .5 HP, 1 phase, 230V motor (Fac. Recon.) . . . . . . .$1,539.00
#43-460R . . . . . . . .5 HP, 3 phase, 230/460V motor (Fac. Recon.) . .$1,699.00
Monday - Friday
8:00am to 5:00pm Eastern Time
11
Order Toll Free! 1-800-428-9898
Download from Www.Somanuals.com. All Manuals Search And Download.
DELTA - FACTORY RECONDITIONED
Delta 13-Spindle Single Row Line Drill
• 3/4 HP, 1 phase, 115V motor
• 32mm spindle centers
Delta 16-1/2” 16-Speed Floor
Model Drill Press
• 3/4 HP, 1 phase, 115/230V motor
• Speed range: 215 to 2,720 RPM
• 5/8” chuck size
• 4-7/8” spindle travel
• 14” x 14” table
• (1) 13-spindle drill head
• 7-right hand & 6-left hand, 10mm fixed collets
• Top-down drilling for easy visibility
• Manually operated
• Panel indexing pins
• Weight: 206 lbs
• 30” back fence with (2) stops
• Telescoping handle extends
from 16” to 23” for increased
* Shown with optional
stand and tooling
leverage
• Tooling not included
• Weight: 108 lbs.
#17-965R (Factory Reconditioned) ......$319.00
#32-325R (Factory Reconditioned) ......$889.00
Delta 16-1/2”VS Floor Model
Drill Press
Delta 16-1/2”VS Floor Model
Drill Press
• 3/4 HP, 1 phase, 120/240V motor
• Two variable speed ranges:
150 to 1,100 RPM
• 3/4 HP, 1 phase, 120/240V motor
• Variable speed range: 200 to 2,500 RPM
• 1/2” chuck size
500 to 3,200 RPM
• 1/2” chuck size
• 6” spindle travel
• 14 x 14” table
• 6” spindle travel
• 14 x 14” table
• Includes Work lamp and tool tray
• Weight: 230 lbs.
• Weight: 230 lbs.
#17-925R (Factory Reconditioned).....$659.00*
#17-968R (Factory Reconditioned) ......$399.00
Delta Shopmaster 1” x 42” Belt
& 8” Disc Sander
Delta Hollow Chisel Mortiser
• 1/4” to 1/2” chisel capacity
• 5/8” chisel shank capacity
• 5” maximum chisel stroke
• 13-1/2” x 16-1/4” table size
• 3/8” chuck capacity
• 1/3 HP, 1 phase, 115V motor
• Belt speed: 3,000 FPM
• Disc speed: 1,725 RPM
• Tilting tables for belt and disc
• 1-1/2” dust chute outlet
• Includes miter gauge
• Spindle speed: 1725 RPM
• 1/2 HP, 1 phase, 120V motor
• Weight: 55 lbs.
• Weight: 68 lbs.
#SA180R (Factory Reconditioned) .....................................$88.00
#14-651R (Factory Reconditioned) ......$219.00
Delta X5 18-36” Single Drum Sander
• 1-1/2 HP, 1 phase, 120V main motor
• Variable speed conveyor motor (1 to 12
FPM)
• One 18” drum
• Maximum sanding width: 36” (in two pass-
es)
Delta 6” x 108” Oscillating Horizontal Edge
Sander
• 3 HP, 1 phase, 220V motor
• One 12” x 35-3/8” table
• Platen tilting: 0 to 90°
• End sanding table allows for
curved sanding
• Belt speed: 3,150 FPM
• 3/4” belt oscillation
• 4” dust chute outlet
• Includes sanding drum kit with 1-
1/2”, 2” and 3” x 4” long sanding
drums & miter gauge
• One 4” dust hood outlet
• Power take-off spindle accommodates acces-
sory pneumatic drums for contour sanding
• Includes 5 - 80 grit sanding wraps, 4 - 120
grit sanding wraps and steel stand
• Weight: 190 lbs.
• Weight: 500 lbs.
#31-396R (Factory Reconditioned) ...............................$1,489.00
#31-255XR (Factory Reconditioned) ..$699.00*
Check us out on the web!
12
Download from Www.Somanuals.com. All Manuals Search And Download.
DELTA - FACTORY RECONDITIONED
Delta X5 14”Woodcutting Band Saw
Delta 14”Woodcutting Band Saw
• 1HP, 1 phase, 115/230V motor
• Blade speed: 3,000 SFPM
• 6-1/4” height capacity
• 3/4” max blade width
• 93-1/2” blade length
• Includes FREE Rip Fence!
• Weight: 275 lbs.
• 1-1/2 HP, 1 phase, 115/230V motor
• Blade speed: 3,000 SFPM
• 6-1/4” height capacity
• 3/4” max blade width
• 93-1/2” blade length
• One 4” dust chute outlet
• Includes Quick release tension lever
• Weight: 275 lbs.
* Shown with optional
mobile base
#28-299R (Factory Reconditioned) ......$489.00
#28-475XR (Factory Reconditioned)....$749.00
Delta X5 6” Jointer
Delta 14”Woodcutting Band Saw
• 3/4 HP, 1 phase, 115V motor
• Blade speed: 3,300 SFPM
• 6-1/4” height capacity
• 3/4” max blade width
• 1 HP, 1 phase, 120/240V motor
• 3 knife cutterhead
• Table length 46”
• Cutterhead Speed: 4,800 RPM
• Weight: 225 lbs.
• 93-1/2” blade length
• One 4” dust chute outlet
• Includes Quick release tension lever
• Weight: 201 lbs.
#28-276R (Factory Reconditioned) ......$339.00
#37-275XR (Factory Reconditioned)................................$429.00
Delta X5 15” Planer
• 3 knife cutterhead
• 3 HP, 1 phase, 230V motor
• 2 Feed speeds: 16 & 30 FPM
• Cutterhead speed: 5,000 RPM
• 6-1/2” max planing thickness
• 12” min planing length
• Includes steel stand with exten-
sion rollers
Delta 8”Professional Jointer
• 1-1/2 HP, 1 phase, 120/240V motor
• 3 knife cutterhead
• Table length 72-3/4”
• Cutterhead Speed: 5,600 RPM
• Weight: 414 lbs.
• Weight: 340 lbs.
#22-780XR (Factory Reconditioned)................................$999.00
#37-380 (Factory Reconditioned)...................................$895.00*
Delta 13”Two-Speed Portable Planer
• 2 knife cutterhead
Delta X5 8” Jointer
• 1-1/2 HP, 1 phase, 120/240V
motor
• 3 knife cutterhead
• Table length 76-1/2”
• Cutterhead Speed: 5,500 RPM
• Weight: 394 lbs.
• 15 AMP, 120V motor
• 2-speed material feed rate system:
• Dimensioning speed (30 FPM)
to quickly reach desired thickness
• Finishing speed (20 FPM) for
an ultra smooth surface on final
pass
• Cutterhead speed: 10,000 RPM
• 6-1/2” max planing thickness
• Cutterhead lock helps reduce snipe
• Weight: 97 lbs.
#22-580 (Factory Reconditioned).....................................$349.00
#37-365XR (Factory Reconditioned).............................$1,369.00
Monday - Friday
8:00am to 5:00pm Eastern Time
13
Order Toll Free! 1-800-428-9898
Download from Www.Somanuals.com. All Manuals Search And Download.
|