Kala 300
Kala 300 Vox
Kala 300 Duo
Kala 300 Trio
Kala 300 Vox Duo
Kala 300 Vox Trio
Kala 300 Quattro Kala 300 Vox Quattro
Charge handset(s)
for 24 hours before use.
This equipment is not designed for making
emergency telephone calls when the power fails.
!
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING
2
1
&
3
PHILIPS
PHILIPS
2,4
V
ꢀ
2,4
V
ꢀ
PHILIPS
2,4
V
ꢀ
5
4
24
PHILIPS
duo
See last page
Quattro
Download from Www.Somanuals.com. All Manuals Search And Download.
Conformity, Environment & Safety
✦ Safety information :
This equipment is not designed for making emergency calls when the power fails. An
alternative should be made available for access to emergency calls.
✦ Conformity :
Hereby, PHILIPS, declares that the product range Kala 300 is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC (DoC available
in the geographical area which is indicated on the label of the box.
✦ Power requirements :
The product requires an electrical supply of 220-240 volts, single phase alternating current,
excluding IT installations defined in standard EN 60-950.
✦ WARNING !
The electrical network is classified as dangerous according to criteria in the standard
EN 60-950. The only way to power down this product is by unplugging the power supply
from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is
always easily accessible.
✦ Telephone connection :
The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages,
as defined in the standard EN 60-950). Following a power cut, date and time settings, as well
as the call in progress are lost.
✦ Safety precautions :
Do not allow the handset to come into contact with liquids. Do not open the handset or the
base station. This could expose you to high voltages. Do not allow the charging contacts or
the battery to come into contact with conductive materials.
✦ Environmental care :
Please remember to observe the local regulations regarding the disposal of your packaging
materials, exhausted batteries and old phone and where possible promote their recycling.
G You can install your product immediately and start using the
phone after charging it for 24 hours.
G You need to perform an operator setting if you are not
connected to the main operator network in your country. (see page 14)
G In case you need to change the battery pack, always use a
NiMH AAA 600 x 2 rechargeable battery pack .
Quattro
The information included in this manual is also valid if you have bought a Duo, Trio or a Quattro
pack in the Kala 300 range.
Philips has marked the battery and packaging with standard symbols designed to
promote the recycling and appropriate disposal of your eventual waste.
Batteries should not be disposed of with general household waste.
A financial contribution has been paid to the associated national recovery & recycling
system.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Kala 300 & Kala 300 Vox Handsets
Keypad
Talk key
p 5
Phonebook keys
Call log key
p 6
p 6
Redial list & correction key
Validation and intercom key
p 5
p 7
p 5
DEF
MNO
DEF
ABC
JKL
TUV
ABC
Loudspeaker key (Kala 300)
GHI
GHI
MNO
JKL
TUV
PQRS
WXYZ
PQRS
WXYZ
Loudspeaker/Answerphone key (Vox) p5/p9
Programming key
Volume key
p 12
p 5
Kala 300
Kala 300 Vox
Screen Icons
Answerphone settings / Answerphone On (Kala 300 Vox only)
Handset ringer settings
p 12
p 13
p 13
p 14
p 9
Handset registering / unregistering
Technical settings
Message indicator on answerphone (Kala 300 Vox only)
Battery charge status :
charge in progress -
fully charged -
low p 4
p 6
Call log / Operator Mail box*
Loudspeaker
p 5
Friend phonebook
p 6
Call in progress
-
Internal call
p 7
Family phonebook
p 6
Base / Handset link
p 15
Download from Www.Somanuals.com. All Manuals Search And Download.
* subject to a subscription with your operator.
2
Kala 300 & Kala 300 Vox Base Stations
Kala 300
Answerphone
indicator status
Kala 300 Vox
Keys :
Paging key (Kala 300 only)
p 8
p 8
p 9
p 9
p 10
Paging key / Select ringer Melody (Kala 300 Vox only)
Delete message (Kala 300 Vox only)
Play / Stop messages (Kala 300 Vox only) - Answerphone ON/OFF
Adjust loudspeaker volume (Kala 300 Vox only)
Indicator status (Kala 300 Vox only) :
Answerphone On -
answerphone off
p 9
new messages -
answerphone full
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Installing your telephone
✦ Inserting / Replacing battery / Telephone connection
Warning :To insert the battery and/or to connect your telephone, please refer
to the drawings printed on the inside cover and on the lip inside the box.
With the help of the installation drawings :
G Open the battery door by sliding it down,
G Connect the battery pack to the connector inside the handset,
G Place the battery with sticker face up and wires along the left side of the
battery pack,
G Replace the battery door.
✦ Charging / Recharging the telephone (See battery status icon on page 2.)
On first use or when inserting a new battery, charge the battery with the handset for at
least 24 hours. This ensures optimal battery life reached after 3 cycles of charge/uncharge.
The battery needs to be charged if you hear a beep when using the telephone.
✦ Configuring the phone for use
Don’t change your configuration code if you live in one of the countries in the top part
of the table below. Your product is already factory configured with the right settings.
Warning : This product is ONLY designed to be
used in countries LISTED below.
Country
Code
Northern Ireland
UK
44
44
WXYZ
WXYZ
Warning : If you live in the country in the table below, you must enter the relevent
configuration code using the key sequence shown followed by your country code.
Rep. of Ireland
153
WXYZ
WXYZ
For Example to configurate for Republic of Ireland :
dial 153
WXYZ
WXYZ
Advice : If you have bought your product in any of the above countries but want to use it
in another one, you can enter the configuration code, according to the above tables, in
order to activate the right country settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Using the telephone
Making a call
✦ Answering a call / Hanging up
flashes
answer the call.
on an
To end the conversation, press the key again or replace the handset on the
base station.
incoming call
or if the
✦ Calling directly
answerphone
Kala 300 Vox
is on line .
dial the phone number.
✦ Predialling the number before calling
To correct
entries use
Dial the phone number
✦ Calling from a phonebook
.
DEF
or
or
to scroll through the list
✦ Adjusting the volume (earpiece or loudspeaker)
Using handsfree on the handset
3 volume
levels are
available for
both the
earpiece and
the
on Kala 300 handset
on Kala 300 Vox handset
✦ Activating / Deactivating the loudspeaker
/
Warning : Handsfree activation could suddenly increase the volume in the
earpiece to a very high level. Make sure the handset is not too close to
your ear.
loudspeaker.
Using the Redial list and Correction key
✦ Accessing / exiting the redial list
The redial list
contains the
last 5 numbers
called : from
the latest to
the oldest.
DEF
or
/
to scroll through the redial list
to exit
✦ Calling a number from the redial list
DEF
or
to scroll through the redial list
✦ Deleting a number from the redial list
DEF
MNO
or
to delete the current entry
to scroll through the redial list
Download from Www.Somanuals.com. All Manuals Search And Download.
5
✦ Storing one of the redial list numbers into one of your phonebooks
DEF
or
or
beep
enter
to scroll through the redial list
the name
✦ Number correction
corrects :
G a digit when predialling,
G a digit or a character when entering names in the phonebooks.
A long press on
aborts any procedure in progress.
Creating and changing phonebook entries
The telephone has two phonebooks :
You can also
create an
A 20-entry family phonebook (see VIP feature p.13)
entry from the
redial list and
the call log*.
A 20-entry friends phonebook. (see VIP feature p. 13 )
✦ Creating an entry
Each entry contains a name (10 characters) and a number (16 digits).
Press
or
1. Enter the phone number and press
or
.
to
Note : To insert a pause, long press on
.
access or exit
the
2. Enter the name and press
to validate.
phonebooks.
✦ Changing an entry (name)
DEF
or
or
to scroll through the list
to modify the name
✦ Changing an entry (number)
DEF
or
or
to scroll through the list
to modify the old number
✦ Deleting an entry
DEF
MNO
or
or
to scroll through the list
to delete the entry
Using the call log
This feature is available if you have registered to the caller identification service
with your operator.
The call log stores the last 10 external calls received :
- answered calls (
)
* Subject to a subscription with your operator.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
- unanswered calls
- network message service information*
- messages from your answerphone (Kala 300 Vox only) ( ).
* Subject to a subscription with your operator.
✦ Accessing / exiting the call log
flashes if
there is a new
message on the
operator mail
box (subject to
a subscription
with your
DEF
or
/
to scroll through the log
to exit
✦ Consulting the call log
The screen can either display :
operator.)
G the caller’s number*
G the caller’s name (if known in the phonebook)*
G stars if it is an unidentified call**
G dashes if non recognised number
Time and date
depends on
the network.
You can display, the phone number, the time and date of the call by
pressing
.
Press
to return to consulting mode.
is
* Subject to a subscription with your operator for the Caller Line Identification and/or Name
Display services
** Unlisted numbers, withheld caller identification
displayed if a
message has
been left on
the operator
mail box.
✦ Calling a number from the call log
DEF
or
to scroll through the log
✦ Deleting an entry from the call log
DEF
MNO
or
beep
to scroll through the log
to exit
✦ Storing one of the log numbers into your phonebooks
DEF
or
or
beep
enter
to scroll through the log
the name
Using the intercom (extra-handset, Duo, Trio, Quattro)
This function can only be used with a multi-handset configuration. It allows you to
make free internal calls and transfer external calls from one handset to another.
Intercom & call
transfer is only
possible with
handsets*
✦ Internal call
short press to call all the handsets in idle mode.
registered to
the same base
station.
long press, enter the handset number (1 to 4) to call the selected
handset in idle mode.
* If the handset does not belong to the Philips Kala 300 range, this function may
Download from Www.Somanuals.com. All Manuals Search And Download.
not be available.
7
Press
or
to answer or hang up the internal call.
* If the handset does not belong to the Philips Kala 300 range, this function may
not be available.
During
✦ Fast call transfer
During a call in progress you can transfer the call without waiting for the
transfer, the
person on hold
will hear music.
other handset to pick up :
All the handsets ring.
.
4 handsets can
be registered
to the same
base station.
✦ Call transfer to a specific handset
During a call in progress you transfer the call to a specific handset :
Long press on
enter the handset number (1 to 4)
Paging (valid also for Duo, Trio, Quattro packs)
All the
subscribed
handsets ring.
for Kala 300 Vox base station -
for Kala 300 base station.
This feature allows you to locate the handset(s).
Press
or
on the base station. Press any key on the handset to
or again.
stop ringing once relocated or press
Adjusting the Kala 300 Vox Base ringer
Melodies : 3 melodies are available on the base station.
Long press on
to enter melody programming mode.
The first melody will be played, press
to hear the next melody. To
validate your choice, let the music play until you hear the validation beep.
Melody Volume : 4 volume levels including silent are available on the
base station.
The last
selected level
will be
registered for
the next call.
When the melody is playing, press
to change the volume. To validate
your choice, let the music play until you hear the validation beep.
When the melody is playing, a long press on
on the base station.
deactivates the ringer
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Using your answerphone
Setting up the answerphone
The answerphone is by default activated with a pre-recorded message and the
answer & record mode.
Recording capacity : 9 min. (standard quality) - 6 min (high quality) : including
personal outgoing message if recorded.
✦ Activating the answerphone
icon is
From the base station : Long press on
on.
Base station
indicator is on.
PQRS
From the handset :
beep
To exit
To exit
✦ Deactivating the answerphone
icon is
From the base station : Long press on
off.
Base station
indicator is off.
WXYZ
From the handset :
beep
Base station
indicator
blinks.
✦ Playing new messages / playing a memo
From the base station :
. You can adjust the volume using
icon
From the handset :
. You can adjust the volume using
blinks.
✦ Playing your old messages
From the base station :
.
ABC
DEF
From the handset :
or
icon is
on.
previous or next message To exit
✦ Deleting the current message
From the base station : Play the message and press
MNO
From the handset :
listen to the
message
To exit
✦ Deleting all messages
From the base station : Play the message and long press on
MNO
From the handset :
.
Long press
To exit
✦ Playing the current outgoing message
JKL
From the handset :
the outgoing message
is played
.
To exit
Download from Www.Somanuals.com. All Manuals Search And Download.
9
✦ Recording your personal outgoing message
*You will hear
the personal
outgoing
*
JKL
TUV
GHI
speak after the beep
To exit
message.
However, if you do so, you will permanently erase the pre-recorded
outgoing message.
✦ Recording a memo
If you want to leave a local message for your family :
This local
message
(memo) is
treated like all
other
TUV
GHI
ABC
speak after the beep
To exit
answerphone
messages.
✦ Selecting the answerphone mode
You can select either answering mode only (which plays an outgoing message but
does not take messages) or answering & recording mode (which takes messages.)
TUV
DEF
WXYZ
or
to switch between modes To exit
answering &
recording mode
answering only mode
Advice : Prior to using the answering-only mode, make sure that you have
adapted the outgoing message.
Screening the calls while a message is being left
This allows you to listen to any caller leaving a message and to decide whether or
not to take the call. By default the call screening is activated on the base station. Press
to
✦ Activating call screening
permanently
deactivate call
screening.
From the handset :
From the base station :
or
Press
to
✦ Deactivating call screening
deactivate “call
by call” call
screening.
From the handset :
From the base station :
or
several times.
The last
selected level
will be
✦ Increasing the volume of the call screening
During call screening, the volume can be adjusted either from the base
station or the handset. 4 volume levels are available, including silent.
registered for
the next call.
Press
until you have reached the desired volume.
When the
answerphone
✦ Call interception
is on-line,
blinks.
The recording of the current message is stopped and the call is taken.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Remote use
This allows you to remotely dial in and access your answerphone via any
telephone with a
key and tone dialling.
RC
✦ Remotly-activating the answerphone
(Registration
Code) code is
written under
the base.
PQRS
Dial your phone number
enter the RC Code*
after 9 rings and a beep
to activate
* or enter
your personal
Remote
Access Code
(see p 13).
✦ Remotly-deactivating the answerphone
WXYZ
Dial your phone number
enter the RC Code*
during the outgoing message
to deactivate
✦ Remotly-accessing the answerphone
1. Dial your phone number**
** You will
hear the
recorded
outgoing
message.
2. During the outgoing message press
access code
and enter your remote
✦ Functions available during remote access
Keys
Functions
Replay the message
Play the previous message
Play the message
ABC
DEF
JKL
MNO
TUV
Play the next message
Play the outgoing message
Delete the current message
Stop playing message
To record the outgoing message + press
JKL
ABC
TUV
GHI
To record a local memo + press
TUV
GHI
Note : If you want to deactivate the remote use see note page 13 in “Changing
Remote Access Code”.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Customising the telephone
Programming the phone
To enter the programming mode press
.
Use
and
Icons representing the menus will then be displayed on the screen :
DEF
to
Answerphone settings (only for Kala 300 Vox)
navigate within
the menus.
Volume and melody settings (VIP melodies*)
Handset registering
Icons : flashing
to select the
menu and
steady on once
entered in the
menu.
Other settings
Once the menu is selected with
in the selected menu.
and
DEF
keys, press
to enter
Note : Each menu has one or several options. The options will appear on the
screen one after the other by pressing . To exit the programming mode
at any time press
or
(long press) .
Answerphone settings (Kala 300 Vox only)
✦ Changing the day (1st option out of 5 : 1/5)
Each day is represented by a number : Monday as
1...Sunday as 7.
*The VIP
settings allow
to store the
names in
particular
phonebook
groups. A
Scroll to the required day number with
and press to validate.
or
DEF
✦ Changing the time (option 2/5)
melody can be
associated to a
phonebook.
When ringing,
the VIP melody
helps you
identify the
caller’s group.
(see p. 13).
Enter the time (without any space or dash) and press
to validate.
✦ Number of rings before answer (option 3/5)
You can select from the list (2,3,4,5 and toll saver** )
the number of rings after which the answerphone will
take the call.
Scroll to the required number of rings with
and validate with
or
DEF
.
** :In toll saver mode, if there are new messages the answerphone will answer
after 3 rings, and only after 5 rings if there are no new messages. So, you can hang
up after 4 rings without paying for a call. Toll saver is useful for remote access only.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
✦ Changing Remote Access Code (option 4/5)
To remotely access your answerphone you need to
enter a secret code (4 digits). By default, this code is
identical to the RC code written under the base.
If you want to change the default code :
Enter a personal code and press
to validate.
Note : You can delete with
your Remote Access
Code. If this code has been deleted, the remote-activation of
the answerphone is not possible.
✦ Choosing the recording quality (option 5/5)
You can choose the recording quality of your
answerphone.
: High
:
quality.
Standard
quality.
Scroll to the required quality and validate with
.
Handset ringer Settings
✦ Ringer Volume (option 1 out of 4 :1/4)
Scroll through the different volume settings using
(
)
Base station
volume and
melody can
also be
changed (Kala
300 Vox only),
see page 8.
or
DEF
keys. Press
to validate your choice.
✦ Handset Melody (option 2/4)
Scroll through the 7 different melodies using
or
DEF
keys. Press
to validate.
is blinking
when selecting
the friends
phonebook
melody.
✦ Friends phonebook (VIP) Melody* (option 3/4)
Scroll through the 7 different melodies using or
DEF
keys. Press
✦ Family phonebook (VIP) Melody* (option 4/4)
Scroll through the 7 different melodies using or
to validate.
is blinking
when selecting
the family
phonebook
melody.
DEF
keys. Press
to validate.
* Subject to a subscription with your operator for the Caller Line Identification.
Handsets registering / unregistering (
)
4 handsets can be registered to the base station.A handset
can only be associated with 1 base station.
To register another handset, first enter registration
mode by unplugging and plugging back in the
power adapter to the electricity supply.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Once the
menu is selected, enter the RC* code written under the
to confirm.
base and press
Warning : If you wish to associate non Philips handsets to the Kala 300 range
base stations, make sure that this handset is GAP compliant otherwise it will not
operate properly.
✦ To unregister the handset
*RC code
(Registration
Code) is
written under
the base.
enter the RC code*
WXYZ
GHI
✦ To unregister all the handsets (except the handset you are using)
enter the RC code*
JKL
WXYZ
Warning : Once unregistered, the handset is no longer operational.
Other technical settings (country dependent)
If your network operator is not the main national network operator, you may have to change the
line settings. Some of the following settings are available subject to a subscription with your
operator and also technical availability.
The options on this menu are country dependent and some may not exist in
certain countries.
DEF
To enter the following settings :
or
To scroll through the menus
Press
to exit the programming option.
✦ Changing Caller Identification type
The Caller Identification service (Name and Number) is available subject to a
subscription to your operator (according to availability). (Country dependent)
DEF
or
to choose the right setting among the list
✦ Changing the dial mode
This allows you to select either DTMF tone dialling (faster dialling, access to
operator services) or pulse dialling (also called “Loop disconnect” and used in
countries without DTMF capability).The default value is TONE. (Country
dependent, you may not be able to change to “Pulse”).
DEF
or
to choose TONE or PULSE
✦ Changing recall type
The use of some services accessed with
(call waiting, call forward...) will
depend on the flash setting (short/long) according to your installation type (ISDN,
Public, PABX). (Country dependent)
: Short .
: Long.
DEF
or
to choose between Short or Long
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Troubleshooting
✦ Telephone troubleshooting.....
G Please read this user guide carefully before calling your Philips
Customer Care Center.
G IF NEEDED, check that the appropriate country code is set in the
phone :
(see page 4).
WXYZ
WXYZ
PROBLEMS
CAUSES
SOLUTIONS
- No dialling tone when
- The base station is not properly
connected to electricity or to the
telephone sockets.
- Check the connections.(inside
cover).
- Move closer to the base
- Charge battery pack. (inside
pressing
.
- Too far from the base station
- Battery pack is low (low battery icon cover).
is displayed).
- The handset is not registered.
- The handset is out of range.
- Register the handset to the base
station. (p 13)
-
icon is blinking.
- Move closer to the base station.
- When the handset is placed - The handset is not placed correctly
on the charging unit, no beep on the base station charging unit.
- Take the handset off the base
station and put it back again.
- Clean them with a clean and dry
cloth.
is heard.
- Charging contacts are dirty.
Please contact your PHILIPS
dealer in order to purchase new
rechargeable battery pack.
- Battery icon remains empty Handset battery pack is defective.
although the handset has
charged for 24 hours.
- No symbol on the display.
Battery pack is uncharged.
Make sure your product is plugged
in. (inside cover).
Charge battery pack. (inside cover).
Delete some entries to free
memory space.
- A phonebook entry has not The phonebook you wish to use is full.
been memorised.
- Bad audio quality (crackles,
muted, echo, etc.).
- Interference from nearby electrical
appliance.
- Try to plug the base station in
elsewhere.
- Base station installed in a room with - Install the base station in a
thick walls.
different room.
- You are using the handset too far
from the base station.
- Move closer to the base station.
- The Caller Line Identification Service not activated or wrong
does not work. operator or wrong setting.
Check your subscription with
network or change caller
identification type (see page 14).
Download from Www.Somanuals.com. All Manuals Search And Download.
15
✦ Answerphone troubleshooting.....
PROBLEMS
CAUSES
SOLUTIONS
- Answerphone icon is
blinking on the display.
The answerphone memory is full
Consult and delete messages to
free sufficient memory. (p 9)
- The answerphone has not
recorded your outgoing
message.
The answerphone memory is full.
Consult and delete messages to
free sufficient memory. (p 9)
- The answerphone has
stopped.
The answerphone memory is full.
Consult and delete messages to
free sufficient memory. (p 9)
Download from Www.Somanuals.com. All Manuals Search And Download.
16
duo
INSTALLING
Quattro
1
2
3
4
5
&
PHILIPS
24
2,4
V
ꢀ
PHILIPS
PHILIPS
PHILIPS
2,4
V
ꢀ
2,4
V
ꢀ
duo
6
7
8
9
10
PHILIPS
24
2,4
V
ꢀ
PHILIPS
PHILIPS
PHILIPS
2,4
V
ꢀ
2,4
V
ꢀ
11
12
13
14
15
PHILIPS
24
2,4
V
ꢀ
PHILIPS
PHILIPS
PHILIPS
2,4
V
ꢀ
2,4
V
ꢀ
Quattro
16
17
18
19
20
PHILIPS
24
2,4
V
ꢀ
PHILIPS
PHILIPS
PHILIPS
2,4
V
ꢀ
2,4
V
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2002
Philips Consumer
Electronics
DECT & Home Telephony
All rights reserved
Printed in France
GB
3111 285 20322
IRL
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|