Inter-Tel Eclipse
LinkPlus Interface Guide
SpectraLink 6000 System
SpectraLink 8000 System
July 2008 Edition
1725-36136-001
Version E
Download from Www.Somanuals.com. All Manuals Search And Download.
About this Guide
Polycom is the market leader in multi-cellular wireless telephone
systems for the workplace. We manufacture a range of products to
suit any size installation. All Polycom products use our LinkPlus
digital integration technology to integrate with various digital switch
platforms. Using LinkPlus technology, Wireless Telephones
(handsets) emulate digital telephone sets to deliver advanced
capabilities such as multiple line appearances and LCD display
features. This document explains the programming or administration
required to use the host digital switch with the following Polycom
products:
SpectraLink 6000 System - SpectraLink 6300 MCU
The SpectraLink 6300 MCU supports up to 3,200 handsets and up to
1,000 Base Stations. Up to 25 shelves can be interconnected for
maximum system capacity.
SpectraLink 6000 System – SpectraLink 6100 MCU
Designed for smaller installations supporting up to 64 handsets and
up to 16 Base Stations. Up to four MCU controllers can be
interconnected for maximum system capacity.
SpectraLink 8000 Telephony Gateway
The SpectraLink 8000 Telephony Gateway is a wireless telephony
product that provides high quality packetized voice communications
using the Internet Protocol (IP).
Different models of SpectraLink Wireless Telephones vary in
functional capabilities. This document covers the basic operational
features of all handsets. However, certain handset or PBX features
may not be supported by your emulation.
PN: 1725-36136-001_E.doc
3
Download from Www.Somanuals.com. All Manuals Search And Download.
LinkPlus Interface Guide: Inter-Tel Eclipse
Related Documents
SpectraLink 6300 MCU : Operator’s Console (1725-36125-001)
SpectraLink 6100 MCU: Installation and Operation (1725-36097-001)
SpectraLink 6020 Wireless Telephone and Accessories User Guide
(1725-36092-001)
Available at
SpectraLink 8000 Telephony Gateway: Administration Guide for SRP
(1725-36028-001)
SpectraLink 8020/8030 Wireless Telephone and Accessories User Guide
(1725-36023-001)
SpectraLink e340/h340/i640 Wireless Telephone: Configuration and
Administration (SRP) (72-1065-09)
Available at
Telephone Switch Interface Matrix (1725-36128-001)
Available at
Customer Support
Polycom wants you to have a successful installation. If you have
questions please contact the Customer Support Hotline at
(800) 775-5330. The hotline is open Monday through Friday,
6 a.m. to 6 p.m. Mountain time.
For Technical Support: [email protected]
For Knowledge Base:
PN: 1725-36136-001_E.doc
4
Download from Www.Somanuals.com. All Manuals Search And Download.
About this Guide
Icons and Conventions
This manual uses the following icons and conventions.
Caution! Follow these instructions carefully to avoid danger.
Note these instructions carefully.
Label
This typeface indicates a key, label, or button on SpectraLink
hardware.
PN: 1725-36136-001_E.doc
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Plan the Interface
The system administrator programs the telephone system for use with
the Wireless Telephone System using the normal administration
terminal or procedures. Programming can be done after the handsets
are registered.
Recommended programming includes assigning extension numbers
to the handsets and programming features on the telephone system so
they are easily accessible from the handsets.
For analog interfaces, macro codes are in the document relating to
configuring the system. See SpectraLink 6300 MCU: Operator’s Console,
SpectraLink 6100 MCU: Installation and Operation, or SpectraLink 8000
Telephony Gateway: Administration Guide for SRP.
The following information will help the system administrator set up
the SpectraLink handsets to operate in a way that feels familiar and
comfortable to users.
Plan Programming
Digital Interface programming for the Wireless Telephone System will
be faster if it is planned in advance by verifying the parameters and
features on the current telephone system and wired phones. The
system administrator must assign extension numbers to the handsets
and plan the functions (trunk access, toll restrictions, system features,
ringing options etc.) to be programmed for the handsets.
One of these scenarios concerning how the handsets are programmed
should apply to this site:
•
All handsets are programmed alike: All handsets will be
programmed exactly the same. Depending on the capabilities of
the switch, the system administrator can often program one
handset and use it as a model for all other handsets.
•
Groups of handsets are programmed alike: handsets are grouped
into classes that are programmed alike. Depending on the
capabilities of the switch, the system administrator can program
PN: 1725-36136-001_E.doc
7
Download from Www.Somanuals.com. All Manuals Search And Download.
LinkPlus Interface Guide: Inter-Tel Eclipse
“model” handsets then use the model as a template to program
the other handsets.
•
All handsets are different: All handsets are programmed differently,
so each handset will be programmed individually.
Before installation, the parameters of the wired phones should be
verified to plan the parameters required for the handsets.
Extension assignment
What extension numbers will be assigned to the handsets?
Outgoing line access
Which line will be selected when the user goes off-hook?
System forwarding
If this system supports forwarding, what is the forwarding path and
forwarding conditions for this telephone? Does it belong to a hunt
group?
Toll restrictions
To which toll restriction class of service should each line be assigned?
Mailboxes
What are the parameters of this line’s voice mailbox?
Programmable keys
Determine which features, if any, should be programmed on the
handsets. These assignments may emulate assignments on the user's
desk set.
If possible, identify a Display Phone that is programmed exactly or
close to the way the handsets should be programmed. The Display
Phone can be used to copy the programming to the new handsets.
PN: 1725-36136-001_E.doc
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Plan the Interface
Assign Extension Numbers
The wire contractor should inform the system administrator which
port numbers have been designated for the handsets.
The system administrator may use the Extension Assignments
Worksheet at the end of this document to track the port numbers,
extensions, users, and features assigned to handsets.
The Wireless Telephone Display
The SpectraLink Wireless Telephone will display the telephone
number as it is dialed.
Certain characters may be used by the system that are not
implemented in the handset. Flashing characters are not implemented
on the handset, nor is rolling or scrolling of text.
Handset indicators
Line indicators are associated with line access keys. Status indicators
or icons are associated with voicemail, low battery function, other
functions, and service interruption. A left or right arrow is displayed
when the screen can be toggled either left or right to display more
characters.
The following table describes the line icon characteristics and the
related Eclipse Display Phone LED indication.
Line
Indicator
Associate Display Phone
LED Equivalent
Description
Off
On hook or not in use
Off
On Steady
Slow Blink
Fast Blink
Wink
I/C or Line in use
Slow Blink or Steady Light
Medium Blink
Fast Blink
I/C or Line is re-calling from Hold or Transfer
I/C or Line is ringing or camped on
I/C or Line is on Hold
Flutter
PN: 1725-36136-001_E.doc
9
Download from Www.Somanuals.com. All Manuals Search And Download.
LinkPlus Interface Guide: Inter-Tel Eclipse
Feature Programming Requirements
When planning the interface, the following information must be taken
into account:
Line sequences
The handset uses two types of key sequences to access PBX features
and multiple lines. Line sequences are those where the user presses
the LINE key and then a number key. The key-map design designates
“line” keys that should be programmed for line appearance so that
they correspond to line sequences on the handset.
The LINE icon on the handset will reflect activity on the corresponding
deskset key. For this reason, it is recommended that line appearance
keys be used only for line access. If only one line is assigned to a
particular handset, leave the other designated line keys identified on
the key maps unassigned. The corresponding handset LINE + key
sequences will then have no function.
Function sequences
Function sequences are those where the handset user presses the FCN
key and then a number key. Designated “function” deskset keys
programmed to system features such as Transfer and Conference may
have their corresponding menu items display on the handset function
menu. See the key-map diagram for the function keys that are
available for feature programming.
Function Menu Programming
SpectraLink 6300 MCU
The function menu text defaults for the handsets associated with the
SpectraLink 6300 MCU can be changed via the SpectraLink Operator’s
Console.
PN: 1725-36136-001_E.doc
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Plan the Interface
SpectraLink 6100 MCU
For the SpectraLink 6100 MCU, the handset function menu text can
only be changed via remote configuration through the services of
Polycom’s Customer Support.
SpectraLink 8000 Telephony Gateways
Function menu text options can be changed in the Administration
Console of the SpectraLink 8000 Telephony Gateways.
Hold
The Hold feature should be programmed to the Hold key as shown
on the key-map diagrams so that when the Hold key or softkey is
pressed on the handset, the call is placed on hold.
Mute
The handset Mute function is hard-coded to FCN +1 on the PTB4xx
handset. This function sequence is recommended, but the system
administrator can assign the Mute function to any available function
key sequence or leave the function unassigned. The SpectraLink 6000
and SpectraLink 8020/8030 Wireless Telephones use a Mute softkey.
Voicemail
The message-waiting icon on the handset is activated with the
message indication of the deskset. The voice mail feature on the
deskset must be assigned to the feature key as shown in the key-map
diagrams. Do not assign any other feature to this key, since the
associated LED is directly mapped to the message-waiting icon on the
handset. This LED assignment must be used in order to support the
message-waiting icon. Using this key for any other feature or for line
access could cause unacceptable system performance.
Speakerphone
If a handset such as the PTB 4xx has no speaker, speakerphone
function and functions that require the use of the volume keys will
not be made available on the handset.
PN: 1725-36136-001_E.doc
11
Download from Www.Somanuals.com. All Manuals Search And Download.
LinkPlus Interface Guide: Inter-Tel Eclipse
Ring types
Handset ring types (soft, normal, vibrate, etc.) are programmed by the
handset user and are not accessible or changeable by the system
switch. Whenever possible the audible ringer on the handset will
follow the cadence provided by the system switch. Call progress tones
provided by the host system will be passed through to the handset.
PN: 1725-36136-001_E.doc
12
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Interface Implementation
This section describes the recommended programming to use the
Wireless Telephone System with an Inter-Tel Eclipse PBX with an
Associate Display Phone. The procedures assume:
•
The Eclipse system is installed and operational in an approved
configuration. See the Telephone Switch Interface Matrix document
for tested configurations.
•
•
A trained Inter-Tel technician or system administrator will be on
site with the SpectraLink installer to program the system.
The SpectraLink 6000 System or SpectraLink 8000 Telephony
Gateway is installed and the handsets are available for
programming.
The Inter-Tel Eclipse digital interface to the SpectraLink 6000
System is licensed for use in the U.S. and Canada only
Set the Switch Interface Type
SpectraLink 6100 MCU
The Link 150 Master Control Unit requires the switch interface type to
be configured using the front panel buttons. The configuration
procedures are detailed in the SpectraLink 6100 MCU: Installation and
Operation document.
SpectraLink 6300 MCU
When configuring the SpectraLink 6300 MCU, the PBX interfaces are
available as sub-menu selections when defining the Interface Module
type using the SpectraLink 6300 MCU Operator’s Console. Refer to
SpectraLink 6300 MCU: Operator’s Console for details on configuring
the Interface Modules.
PN: 1725-36136-001_E.doc
13
Download from Www.Somanuals.com. All Manuals Search And Download.
LinkPlus Interface Guide: Inter-Tel Eclipse
SpectraLink 8000 Telephony Gateways
Connect to the SpectraLink 8000 Telephony Gateway using the serial
or modem interface. From the Main Menu, choose Gateway
Configuration. Scroll to Telephone Switch Type and press enter to
change this field, from the Submenu of PBX types, select Inter-Tel
Axxess or Axxent. Refer to SpectraLink 8000 Telephony Gateway:
Administration Guide for SRP for details on configuring the Telephone
Switch Type.
Key-mapping the Handset to Emulate Associate
Display Phone Functionality
Line + 1
Line + 7
Call 1
Line + 8 Line + 2
Call 2
Line + 9
Line + 3
Call 3
FCN + 3 Line + 4
Call 4
FCN + 4 Line + 5
IC
Outgoing
FCN + 7
FCN + 1
MUTE
FCN + 2
FWD
FCN + 8
TRANS
REDL
Redial
MUTE
FWD
Transfer
HOLD
FCN + 5
CNF
CNF
SPCL
SPCL
FCN + 9
SYSPD
Sys SPDL
Spkr
Page Zone
Page
Sta SPDL
Line + #
Vol up
Line + 6
DND
FCN + 6
MSG
Line + *
Vol down
BGM
MSG
Associate Display Phone Key Mapping
PN: 1725-36136-001_E.doc
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Interface Implementation
The FCN + [number] and LINE + [number] labels represent the key
sequence on the handset mapped to the corresponding key on the
desk set.
The handset displays a LINE icon that corresponds to each line key.
The voicemail icon displays for voice mail/FCN + 6. See the Handset
Icons section above for details.
The handset function menu default settings are shown for each
corresponding sequence on the diagram above and in the table below;
these may be changed as described above in Function Menu
Programming. Some of these functions (Mute, Redial, Forward, etc.)
are activated by softkeys or FCN menu options on the SpectraLink
6000 and SpectraLink 8020/8030 Wireless Telephones.
FCN + 1
FCN + 3
FCN + 5
FCN + 7
FCN + #
FCN + 2
FCN + 4
FCN + 6
FCN + 8
FCN + *
MUTE
FWD
CNF
MSG
REDL
SPCL
TRANS
(Cancels out of the handset
display)
Program Eclipse PBX and handsets
Program the Inter-Tel Eclipse PBX for use with the Wireless
Telephone System using the Eclipse Database Programming software
that is loaded on your programming PC.
Copy settings from a wired set
If possible, copy the settings from an existing Display Phone with
similar features and keys to create a “template” handset. Once this is
done, you can program additional options on one handset, then copy
the programming to other handsets or groups of handsets.
Station features for handset
Program the features and keys on the handset in the Individual
Station Programming area on your programming PC. Program the
following as required for the parameters required on the handsets:
Account Codes, Mailboxes, Miscellaneous Flags, Miscellaneous Port
Information, Miscellaneous Station Information, Programmable Keys,
PN: 1725-36136-001_E.doc
15
Download from Www.Somanuals.com. All Manuals Search And Download.
LinkPlus Interface Guide: Inter-Tel Eclipse
Special Purpose Station, System Forwarding, Toll Restrictions, and
Voice Mail information.
•
•
Keyset map: Select the standard keyset map.
Ring Intercom: This feature must be enabled. The default is no;
change to yes.
•
Shared Speakerphone: Disable this feature on the PTB 4xx handset,
as it is not supported on this handset.
Copy Programming
After the model handset or handsets have been programmed, use the
copy function to copy the programming to all “like” handsets. The
installer can now test the handsets.
Note: The handset will not emulate ring tones.
PN: 1725-36136-001_E.doc
16
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Extension Assignments Worksheet
Shelf: _______ Interface Module: _______
Interface
Module
Circuit #
Handset
Serial #
Handset #
Ext. #
Name
Comment
Handset 1
Handset 2
Handset 3
Handset 4
Handset 5
Handset 6
Handset 7
Handset 8
Handset 9
Handset 10
Handset 11
Handset 12
Handset 13
Handset 14
Handset 15
Handset 16
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PN: 1725-36136-001_E.doc
17
Download from Www.Somanuals.com. All Manuals Search And Download.
|