14" Color Television/DVD Player
TDX-142
20060510
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
15. If an outside antenna or cable system is connected to the product, be sure the antenna
or cable system is grounded so as to provide some protection against voltage surges
and built-up static charges. Section 810 of the National Electrical Code, ANSI/NF PA No.
70-1984(Section 54 of Canadian Electrical Code, Part 1) provides information with
respect to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna-discharge unit, size of grounding conductors, location of
antenna-discharge unit, connection to grounding electrode. See following example.
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-21)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250 PART H)
NEC-NATIONAL ELECTRICAL CODE
16. Mains plug is used as the disconnect device. It shall remain readily operable and should
not be obstructed during intended use.
Important safety instructions
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Important Safeguards.......................................1
Overview of the function keys..........................4
Setup Menus..........................................................15
General Setup Page...........................................15
TV Display.......................................................15
Angle Mark......................................................15
OSD Lang........................................................15
Screen saver....................................................16
Last Memory...................................................16
Speaker Setup Page.........................................16
Downmix........................................................16
Dual Mono.....................................................16
Dynamic.........................................................17
Preference Page...............................................17
PBC...............................................................17
Audio.............................................................17
Subtitle..........................................................17
Disc Menu.....................................................18
Default..........................................................18
Playing Audio CDs..................................................18
Playing Picture CDs...............................................19
Playing CD files (JPEG )........................................19
The Remote Control.........................................5
TV Function Buttons....................................5
DVD Function Buttons.................................6
Using TV Menus
TV Menus.........................................................7
TV Menu Navigation...................................7
The PICTURE Menu...................................7
The SOUND Menu......................................7
The TUNING Menu.....................................8
The FUNCTION Menu................................8
Playing Discs
DVD Basics.....................................................11
Regional Coding.......................................11
Using Different Menus..............................11
Types of Discs Your DVD Will Play...........11
Search Options................................................12
Picture Scan..............................................12
Chapter Advance.......................................12
Playback Options..............................................12
Repeat........................................................12
Zoom...........................................................12
DVD Information................................................13
Display Info........................................................14
DVD Menu System............................................14
DVD Menu Navigation.......................................15
Other Information
Troubleshooting......................................................20
Recommendations and information
concerning discs.....................................................23
Additional Information.............................................24
External connection................................................25
Specifications.........................................................26
Package Accessories.............................................26
Polaroid Service and Support Information.............27
Table of Contents
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the function keys
Power Switch
Play/Pause
REV. Button
Open/Close Button
Menu Button
Volume Up
Button
Channel Up
Button
Remote Sensor
Power Indicator Stop Button
FWD. Button
Input Button
Volume Down
Button
Channel Down
Button
Video Input Jack
Audio Input Jack(L)
Audio Input Jack(R)
Headphone
Download from Www.Somanuals.com. All Manuals Search And Download.
The Remote Control
TV Function Buttons
INPUT Press it to switch between AV/DVD input and RF
(antenna) input.
TV Press the button to select the remote control in the TV mode.
MUTE Press the button to minimize the volume level. Press
again to restore the original volume level.
DISPLAY Press the button to display the channel information
PICTURE Press the button to display the picture preset.
SLEEP Press the button to set the sleep timer.
RECALL Press the button to return the previous channel. If the
unit is in menu mode, press the Go Back button to return previous
menu screen.
POWER Press the button to turn on and turn off the TV.
VOL. (left and right) buttons Press the button to increase or
decrease the TV volume.
CH (up and down) buttons Press the button to scan up or
down the current channel list. Press once to select the channel
up or down, press and hold to select your desired channel. If
your TV is in standby mode, press these buttons to turn on TV.
In AV mode, press these two buttons to switch to TV mode.
MENU Displays the TV's Main menu.(See page 7 for details.)
0-9 (Number buttons) Press number buttons to select
channel and to set time setting directly. Press 0-9 to select a
channel for example, to select channel 10, press 1 and 0 (interval
time should be less than 1.5 seconds), the channel will change
after 1.5 seconds. If you input "0" firstly, when input the second
number, the channel will change to this channel number without
waiting, for example, to select channel 8, press 0 and 8, the
channel will change immediately.
AUDIO Four preset audio settings for you to select (MEMORY
/STANDARD/NEWS/MUSIC)
MTS/SAP This button is not activated for this model.
Other buttons: The buttons on the remote control other than
listed above are not available for TV function.
Arrow buttons for
TV Menu system
5
The Remote Control
Download from Www.Somanuals.com. All Manuals Search And Download.
The Remote Control
DVD Function Buttons
DVD Press the DVD button to select DVD mode.
POWER Press the button to switch on and switch off the power.
VOL. (left and right) buttons Press the buttons to increase
or decrease the TV volume.
MUTE Press the button to minimize the volume level. Press again
to restore the original volume level.
OPEN/CLOSE
tray.
PLAY/PAUSE
Press the button to open or close the DVD disc
Press the button to start or pause the disc
playback. Press the button again to resume playback.
STOP Press the button to stop the disc playback.
INFO Press the button to display the title, chapter and elapsed time
information during disc playback. Press again to hide the display
information.
ZOOM Press the button to zoom in or zoom out the picture during
DVD disc playback.
TITLE Press the TITLE button to display TITLE menu during DVD disc
playback.
REPEAT Press the button to repeat a chapter or title on DVD or a
track on Audio CDs.
SKIP Press the button to skip to the specified chapter/track or
time. See page 16 for details.
Advances to the next chapter or track.
Reverses to the preceding chapter or track.
MENU Same to TV function
SUBTITLE Press the button to select a subtitle language.(only if
the loaded disc is encoded with multiple Subtitle languages)
AUDIO Press the button to select audio soundtrack language. (only
if the loaded disc is encoded with multiple languages)
ANGLE Press the button to select the camera angle of multiple
screen shot.(only if the loaded disc is encoded with multiple camera
angle)
PBC Press the button to turn the navigation OFF and the disc
playback starts directly without entering the menu. Press again to turn
the navigation ON.
GUIDE Press the button to display the DVD setup menu when the
DVD player is in stop mode.
REV Press the button to search backward through the disc during
disc playback. Press repeatedly to increase the searching speed.
FWD Press the button to search forward through the disc during
disc playback. Press and hold the button to increase the searching
speed.
Arrow buttons(up, down, left, right) Press the buttons to
move through the on-screen menu system.
OK button Press the button to select and highlight the desired item
on the screen display.
Other buttons: The buttons on the remote control other than listed
above are not available for DVD function.
Arrow buttons for
DVD Menu system
The Remote Control
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TV Menus
TV Menus
TV Menus let you control picture quality and features available for TV viewing. There is a different menu
system for DVD features, described on page 16.
Note: Remember to use the TV arrow buttons when accessing the TV's menu system.
TV Menu Navigation
1. To bring up the TV's menu system, press the MENU button.
2. Press MENU button repeatedly to select PICTURE, SOUND, TUNING or FUNCTION submenu.
3. Press the p/q buttons on the remote (or CH p/q on the front of the TV) to select the option.
4. Use the arrow buttons t/u on the remote (or the VOLp/qbuttons on the front of the TV) to
change the setting of the option.
5. Press the MENU button on the remote to exit the menu system.
The PICTURE Menu
The PICTURE menu allows you make adjustments to your
PICTURE
picture settings.
BRIGHTNESS
CONTRAST
Adjusts the brightness of the picture.
Adjusts the contrast between the light and
dark areas of the picture.
BRIGHTNESS
CONTRAST
COLOR
SHARPNESS
TINT
COLOR
Adjusts the color intensity or saturation.
Adjusts the sharpness of the picture.
Adjusts the balance between the red and
green levels.
SHARPNESS
TINT
COLOR TEMP NORMAL
COLOR TEMP
Provides three color adjustments: NORMAL,
COLD(for more blue in the picture), and
WARM (for more red in the picture).
The SOUND Menu
SOUND
The SOUND menu offers different audio options.
VOLUME
TREBLE
BASS
Decreases/increases sound volume.
Decreases/increases high-pitched sound.
Decreases/increases low-pitched sound.
Adjusts left/right speaker balance.
VOLUME
TREBLE
BASS
BALANCE
SURROUND
STEREO
BALANCE
SURROUND Turns the surround sound on or off.
STEREO Adjust different kinds of the stereo sound effect.
Using TV Menus
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TV Menus
The TUNING Menu
The TUNING menu is used to adjust the signal source, channel
setup and reception of the TV.
TUNING
CHANNEL
Use the VOLv/w buttons on the remote
control (or the VOLr/s buttons on the
front of the TV) to scroll through the channels
available. You can enter the channel number
directly using the number buttons.
CHANNEL
DELETE CH
SOURCE
8
NO
AIR
LABEL
AAAAA
AUTO SEARCH
DELETE CH
SOURCE
Select YES to remove the channel.
Select NO to enter to the channel.
Selects AIR or CABLE. Select AIR to receive a
broadcast signal. Select CABLE to receive a
CATV signal.
LABEL
To add a channel description:
1. Open the OSD and select the TUNING menu.
2. Enter the channel you want to add a description for in the CHANNEL option.
3. Select the LABEL option.
4. Press the VOL wbutton, then enter the first character of your label.You can press the
number button repeatedly in a interval of less than one second to select the character you
want.For example,if you want to input 'L',you can press '5' four times rapidly.When you stop
pressing,the cursor will move to the next character after one second.
5. Enter the rest of characters. After you enter the fifth character, you description is saved. You
must enter the five characters, or the label will not be saved.
6. If you want to erase a description, repeat this task and press VOL v button to delete the
characters.
AUTO SEARCH
Starts channel search and stores the channels automatically. Use the VOLv/w
buttons on the remote control to begin the auto search. If you wish to stop the
search before completed, press MENU.
Using TV Menus
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TV Menus
The FUNCTION Menu
The FUNCTION menu is used to setup specific features of the
TV including language and closed captioning.
LANGUAGE Select the language (ENGLISH,FRANCAIS,
ESPANOL) you want the TV menus to be
displayed in.
FUNCTION
LANGUAGE
SCREEN
CHILD LOCK
CCD
ENGLISH
SAVER
OFF
V-CHIP
SCREEN
Turns the screen function on (BLUE BACK-
GROUND and SCREEN SAVER) or off.
CHILD LOCK
Select OFF to turn CHILD LOCK off.
Select ON to activate it. The CHILD LOCK
feature takes effect after the TV is turned
off and back on again. The initial password
is MUTE+999. The initial password is used
to clear the current password and set a new
password, so this password must keep
secret, or else the password will lose
efficacy.
FUNCTION
LANGUAGE
SCREEN
CHILD LOCK
CCD
ENGLISH
SAVER
OFF
V-CHIP
CCD
Offers eight closed captioned modes,
including four text modes.
V-CHIP
V-CHIP
Press VOLr button in front of the TV (or
VOL s button on the remote control to see
the figure left.
CONFIRM PASSWORD ----
RETURN
CONFIRM PASSWORD Press four digital buttons on the
remote control. V-CHIP menu can
not be displayed without inputting
the right password. The initial word
is 0358.
V-CHIP
V-CHIP
MPAA:
[ON]
[N/R]
TVPG SETTING
RETURN
V-CHIP
Adjusts V-CHIP function on or off.
Using TV Menus
Download from Www.Somanuals.com. All Manuals Search And Download.
Using TV Menus
MPAA
Select the MPAA ratings. (When select a
movie rating, the system will automatically
block all other movies with higher ratings.
N/R
TVPG SETTING Press VOLv/w button on the remote
control to go to TVPG SETTING.
RETURN
Return to the previous menu
Hierarchy of Age-Based Ratings
All Children
Content Themes
TV-Y
D
Sexually explicit dialogue
Fantasy violence
Adult language
TV-Y7
TV-G
Directed to Children 7 years and older
General Audience
FV
L
TV-PG
Parental Guidance Suggested
Sexual situations
S
TV-14
Parents Strongly Cautioned
Mature Audience Only
Violence
V
TV-MA
Using TV Menus
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
Playing Discs
Regional Coding
The DVD player and the discs are coded by region. These regional codes must match in
order for the disc to play.
This unit's code is Region 1. Discs with other regional codes can't be played in this unit.
Using Different Menus
Each disc is programmed with different features. There are two separate menu systems
that you can use to access DVD features: the disc's menu and the DVD player's menu
(separate from the TV's menu system). Remember that a feature only works if the disc was
programmed with that feature. For example, if you choose subtitles, the subtitles only appear
if the disc was created with subtitles. The DVD menu system is explained on page 16.
The Disc menu- The disc menu is part of each disc and is separate from the DVD
player's menu system. The contents of each disc's menu vary according to how the disc
was created and what features are included. Sometimes a disc's menu appears
automatically when you insert the disc, or you can access it by pressing the MENU button.
Types of Discs Your DVD Will Play
DVD discs - Contain video.
Audio discs - Contain musical or sound content only (such as CD, CD-R, CD-RW).
Before you load a disc, make sure that it is compatible with the player. Note that the following
discs CANNOT be used with this player:
Laser disc
CD-I, CD-ROM, DVD-ROM
MiniDisc
CD-G discs play audio only, not graphics
To Load and Play a Disc
1. Press the DVD button on the remote to make sure the unit is in the DVD mode.
2. Press the (OPEN/CLOSE) button on the remote to open the disc tray. Place a disc gently
into the tray with the disc's label facing up (double-sided discs have content on both sides,
so you can place either side up).
3. Press the (OPEN/CLOSE) button again to close the disc tray.
The player reads the disc's table of contents, and then one of following happens depending
on how the disc was programmed:
No disc menu appears, a screen saver is displayed. (Press the DVD button to put the
player in DVD mode.)
The disc menu appears. (Highlight the PLAY option and press OK.)
The disc menu appears on the screen when you press
OK.)
The disc starts playing automatically.
. (Highlight PLAY and press
If no picture or screen saver is displayed, press the DVD button to put the player in the DVD
mode.
Playing Discs
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
Search Options
You can use the following search features with some discs:
Picture Scan
When you're playing a disc, each time you press
(Forward) or
(Reverse), your DVD
player scans the disc faster until you reach the fastest scan speed. To resume normal
playback, press
.
Chapter Advance
While a DVD is playing, press
to advance to the next title or chapter. Press the
button
to go to the previous title or chapter.
Playback Options
With some discs, you can access playback features directly from the remote control.
Repeat
For DVD discs, press the REPEAT button on the remote to repeat a chapter. Press once
more to repeat a title.
Press three times to repeat the entire disc disc, and press four times to cancel repeat:
For audio CDs, press REPEAT to repeat a TRACK. Press REPEAT twice to repeat the entire
(ALL) disc, and three times to cancel repeat.
Zoom
1. While you're playing a disc, press ZOOM (the player zooms in on the image). Each time
you press ZOOM, the picture is magnified up to 4X.
2. To see other parts of the picture when you've zoomed in on the image, try pressing the
p/q/t/u buttons to go in corresponding directions.
Playing Discs
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
DVD Information
Title/Chapter
To directly access a title or a chapter:
1. Press SKIP button on the remote control repeatedly. Select Title or Chapter using the t/
u,
2. Enter a title or chapter number using the numeric buttons.
Note: Many discs only have one title.
Audio
Some discs have several audio tracks used for different languages.
To change the track and language during playback:
1. Press AUDIO button on the remote control repeatedly.
2. Choose a language your desired.
This option is only available if the disc offers a number of dialogue languages.
When you change the dialogue language your choice of language is only applicable to
the disc being played. When you eject the disc or switch off the player, the dialogue
language will revert to the one you selected in the Preferences menu (see page 17)
Subtitles
Subtitles are disabled by default. To enable the subtitle function while the disc is playing;
1. Press SUBTITLE button on the remote control repeatedly.
2. Choose a language your desired.
When you change the language of the subtitles your choice of language only applies for
the disc currently being played. When you eject the disc and switch off the player, the
subtitles will be displayed again in the subtitle language you selected in the Preferences
menu (see page 17)
Playing Discs
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
Angle
Some discs offer different camera angles for specific scenes. To change the camera angle
during playback:
1. Press ANGLE button on the remote control.
2. Press ANGLE button repeatedly to select the angle or enter an angle number using the
numeric buttons.
If the disc was recorded using a single camera angle, this function is not available. There are
very few discs offering more than one angle.
TT Time/CH Time
To directly access a location on the disc which does not correspond to the start of a title or
a chapter:
1. Press SKIP button on the remote control twice.
2. Enter a time with the numeric buttons (format h:mm:ss).
Repeat
To select a playback mode while the disc is playing:
Press REPEAT button on the remote control repeatedly to select a repeat playback mode.
Display Info
Press the INFO button repeatedly during playback to show:
DVD: Title elapsed time, Title remaining time, Chapter elapsed time, Chapter remaining time,
Display Off.
VCD, SVCD and audio CD: Single elapsed time, Single remaining time, Total elapsed time,
Total remaining time, Display Off.
Note: A title or chapter can also be accessed by entering the
number in the on-screen display.
DVD Menu System
The DVD player menu system lets you set up features for your DVD player. There is a
different menu system that controls TV features (see page 7). The DVD setup menu is
accessed with the GUIDE button.
Note: Remember to use the DVD arrow buttons when accessing the
DVD player's menu system.
Playing Discs
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
DVD Menu Navigation
1. Make sure the remote is in the DVD mode by pressing DVD button.
2. Press GUIDE. The General Setup Page menu is displayed.
3. Use the t and u buttons to display the different setup menus.
4. Use the p and q buttons to highlight a menu or option item. Use u button to access the
submenu and the p and q buttons to highlight your selection. (Use t button to go back
the menu).
5. Press the OK button to confirm your selection.
6. Press GUIDE to exit the DVD menu system.
Setup Menus
These menus are used to set up TV screen format for DVD viewing and other DVD functions.
General Setup Page
TV Display
TV Display is used only when the TV/DVD is connected
to another TV. Choose one of the following options:
Normal/PS (Pan Scan): Select this option when the
TV/DVD is connected to a standard 4:3 aspect ratio
TV. A 16:9 wide screen picture is shown with some
of picture partly cut off.
Normal /LB (Letter Box): Select this option when the
TV/DVD is connected to a standard 4:3 aspect ratio
TV. A full 16:9 wide screen picture is shown with black
bars on the top and bottom.
Wide: Select this option when the TV/DVD is connected
to a wide screen TV.
Angle Mark
The ANGLE MARK option is used when DVD discs contain scenes which have been shot
simultaneously from a number of different camera angles.
Note: Currently, very few discs have this feature.
Use the ANGLE button on the remote control to access the Angle Mark.
ON: Select if the DVD disc contains camera angles. An angle symbol appears on the screen.
OFF: Select if the DVD disc does not contain angles.
OSD Lang
The OSD Lang controls the language used to display text in the DVD system menus. The
default setting is English. Language options available are English, French, Italian, Portuguese,
Spanish and Russian.
Playing Discs
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
Screen Saver
The Screen Saver is a graphic that randomly moves around the screen to guard against
screen burn-in.
ON: Screen saver turned on.
OFF: Screen saver turned off.
Last Memory
The Last Memory feature enables you to resume play at the same point at which you stopped
playback, even if the disc is removed and re-inserted.
ON: Resumes play from where the disc was last stopped.
OFF: Plays from the beginning.
The Speaker Setup Page
Downmix
Downmix allows you to downmix audio to a receiver and
generate a multi-channel or stereo sound.
LT/RT: Select this option when connecting the TV/DVD
to an audio system with Dobly Pro-Logic.
Stereo: Select this option when connecting the TV/DVD
to and audio system that does not have Dolby Pro-Logic.
Dual Mono
Dual Mono give you a fuller, better balance of audio based on the disc that you are playing.
Stereo: Select this option to output audio from the left and right channels to the left and
right speakers.
L-Mono: Select this option to output audio from the left channel to the two front speakers.
R-Mono: Select this option to output audio on the right channel to the two front speakers.
Mix -Mono: Select this option to hear a mixture of the left and right channels on each of
the two speakers.
ꢀ
Playing Discs
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
Dynamic
This feature allows you to reduce the range between loud
and low sounds to your personal preference. It increase
the lowest sounds and quiets the loudest sounds. Default
setting is OFF.
Use the arrow buttons to access and change the dynamic
setting and press OK to confirm.
Preference Page
PBC (Playback Control)
The Playback Control function turns the Navigate feature
ON or OFF. In the OFF mode, the disc begins playback
without entering the disc's menu. In the ON mode, you
must select play in the disc's menu.
OFF: The disc begins playback without entering the disc's
menu.
ON: You must select Play in the disc's menu.
Audio
Some discs are recorded with different languages. You can select a default language so discs
will play in the language of your choice, if the disc was recorded with multiple tracks. Language
choice are: English, French, German, Spanish, Chinese, Japanese, Korean.
Note: Discs are created differently and not all discs are recorded with multiple languages.
The DVD player cannot override some langauge preferences. If a disc's software was created
to play the movie (title) in a preferred language, the preference you set might be ignored.
Also, if the language isn't available on the movie you're playing, the disc's default language is
chosen.
Subtitle
This option allows you to select a language used to display subtitles (if subtitles are turned on
and are available on the disc). Language choices are: English, French, German, Spanish,
Chinese, Japanese, Korean, Russian.
Note: Not all discs offer subtitles with multiple languages.
Playing Discs
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
Disc Menu
This option allows you to select a default language for the disc's menu. Language choices are:
English, French, German, Spanish, Chinese, Japanese, Korean.
Default
The DEFAULT option restores the setup options to the factory settings, with the exception of
password. This option is available only in the stop mode or when the disc tray is open.
Playing Audio CDS
Your DVD player has many of the same features as an audio CD player. This section explains
how to play audio CDs in your TV/DVD player.
Scan Disc
You can scan through the disc when you're playing it by doing the following:
1. Press the
(Fast Forward) or
(Reverse) button on the remote.
2. Press the button again to scan at a faster speed.
3. Press the
PLAY/PAUSE button at any time to resume normal playback.
Track Advance or Reverse
1. Press the
or
button on the remote when you're playing a disc.
2. Each time you press the button, the CD advances (or reverses) one track.
Pause
1. Press the
2. Press it again to resume normal playback.
PLAY/PAUSE button when a disc is playing to pause the disc.
Playing Discs
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
Playing Picture CDs
Insert a picture CD into the disc tray. The pictures on the CD are played in a slide show.
1. To stop on a certain picture, press
PLAY/PAUSE.
2. Press the arrow keys to rotate the picture.
Playing CD Files (JPEG)
When a CD with JPEG files is inserted, a File Manager window is displayed.
The DVD player automatically begins playback of the files on the disc. Use the arrow buttons
to navigate through the folders and select files for playback.
When displaying JPEG files, press
the slide show.
(Fast Forward) repeatedly to change the speed of
.
ꢀ
Playing Discs
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Troubleshooting
Most problems you encounter with your TV/DVD can be corrected by consulting the following
troubleshooting list.
TV Problems
TV won't turn on
Press the POWER button.
Make sure the TV is plugged in.
Check the wall receptacle (or extension cord) to make sure it is "live" by plugging in some-
thing else.
Something might be wrong with your remote control. Press the POWER button on the
front of the TV. If the TV turns on, check the remote control solutions on page 21.
Button don't work
If you're using the remote control, press the TV button first to make sure the remote is in
TV mode.
Unplug the TV for two minutes and then plug it back in. Turn the TV on and try again.
TV turns off unexpectedly
Sleep timer might have been activated.
Electronic protection circuit may have been activated because of a power surge. Wait 30
seconds and then turn on again. If this happens frequently, the voltage in your house may
be abnormally high or low. Unplug the TV and wait five minutes, then plug it in again.
Blank screen
Try another channel.
No sound, picture okay
Maybe the sound is muted. Try pressing the volume up button to restore sound.
Can't select certain channel
Channel may be blocked or not approved through the V-CHIP (Parental Control).
Noisy stereo reception
Maybe a weak station. Access the SOUND menu (see page 7), highlight MODE and then
choose MONO.
No picture, no sound but TV is on
Maybe the signal type (SOURCE) is set wrong. Go to page 8 for detailed instructions.
The channel might be blank- change channels.
If in DVD mode, press TV, then the INPUT button twice for the CABLE or AIR channels.
Sound okay, picture poor
Check antenna connections. Make sure all of the cables are firmly connected to the jacks.
Try adjusting sharpness function to improve weak signals.
Black box appears on the screen
Closed caption might be on.
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
The Remote Control Doesn't Work
Something might be between the remote and the remote sensor on the component. Make
sure there is a clear path.
Maybe batteries in remote are weak, dead, or installed incorrectly. Put new batteries in the
remote.
You might need to reset the remote: remote batteries and press the number 1 button for
at least 60 seconds. Release the 1 button, and replace the batteries.
Make sure remote is in the correct mode (TV or DVD).
Problems with V-Chip/Parental Controls
The rating limits don't work
You must activate the settings.
I don't remember my password and I want to unlock the TV
If you forget your password you can reset it. Enter 0358 as the password and then
change it to a new one.
DVD Problems
Can't advance through a movie
You can't advance through the opening credits and warning information that appear at the
beginning of movies because the disc is programmed to prohibit that action.
The invalid icon appears on screen
The feature or action cannot be completed at this time for one of the following reasons:
The disc's software restricts it.
The disc's software doesn't support that feature (e.g., angles).
The feature is not available at the moment.
You've requested a title or chapter number that is out of range.
The picture is distorted
The disc might be damaged. Try another disc.
If you're using forward or reverse buttons, it is normal for some distortion to appear while
scanning.
A screen save appears on the TV/DVD screen
Your player is equipped with a screen saver that appears on the TV after your player has
been idle for several minutes. To make it disappear, go to the General Setup Page menu
and turn the Screen Saver feature to off.
Subtitle and /or audio language is not the one selected from the initial
setting
If the subtitle and/or audio language does not exist on the disc, the initial settings will not
be seen/heard. The disc's priority language is selected instead. Set the subtitle and/or
audio language manually through the DVD player's menu.
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
The menu is displayed in a foreign language
The OSD Lang option is set to that language. Go to the General Setup Page
menu and select the OSD Lang. Select the language you prefer.
No forward or reverse scan
Some discs have sections that prohibit rapid scanning, or title and chapter skip.
If you're trying to skip through the warning information and credits at the
beginning of a movie, you won't be able to. This part of the movie is often
programmed to prohibit skipping through it.
Disc won't eject
When you put a disc into the player, the player might take up to 15 seconds to
read the disc. You won't be able to eject the disc during this time. Wait 15
seconds and try again.
Switching back to TV mode when in DVD mode
Press the TV button on the remote and then the INPUT button until the Cable/
Aire channels are displayed.
Other Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Recommendations and Information Concerning Discs
CD-R and CD-RW Discs
This player can play most CD-R and CD-RW discs. However, depending on the recorder of the
discs of your personal computer, the type of disc and recording method used, some discs
might not play, or the performance might not meet the expected standard of quality. When
playing a CD-R disc, it is completely normal for the unit to take up to 20 seconds to recognize
the disc before it plays. If the disc is not recognized after a period of 20 seconds, remove the
disc, and then insert it again. If after several trials, the disc cannot be recognized, make sure
you have followed the recommendations below or try another type of disc.
Whatever the actual recording capacity of a disc, do not fill it to maximum capacity.
Use CD-R discs rather than CD-RW (re-recordable CDs), as replay of CD-RWs may
sometimes not work properly.
Use a reliable and good quality recording software.
Before recording on a disc, close all applications on your personal computer in order to
optimize the quality and reliability of recordings on the disc.
Other Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Additional Information
Maintenance of Cabinet
For safety reasons, when cleaning hte cabinet be sure to disconnect the AC power cord
from the AC outlet.
Do not use benzene, thinner, or other solvents for cleaning.
Wipe the cabinet with a soft cloth.
Formation of Condensation
Due to sharp changes in temperature and humidity, condensation may form if warm air
comes in contact with any cold part's inside the player.
When condensation forms inside the player, the player may not operate correctly. If this
occurs, leave the player at room temperature until the inside of the player becomes dry
and operational.
If condensation forms on a disc, wipe the disc with a soft, dry cloth by moving the cloth
from the center hole toward the outer edge.
Handling Discs
Don't touch the disc's date surfaces. Hold by the edges or by one edge and the hole in the
center.
Don't affix labels or adhesive tape to label surfaces. Don't scratch or damage the label.
Do not use damage (cracked or warped) discs.
Cleaning Discs
Dirty discs can cause reduced video and audio performance. Always keep discs clean by
wiping them gently with a soft cloth from the inner edge toward the outer perimeter.
If a disc becomes dirty, wet a soft cloth in water, wring it out well. Wipe the dirt away gently,
and remove any water drops with a dry cloth.
Do not use record-cleaning sprays or anti-static agents on discs. Also, never clean the discs
with benzene, thinner, or other volatile solvents which may cause damage to the disc
surface.
Handling Cautions
Before connecting other components to this player, be sure to turn all components off.
Don't move the player while a disc is being played. The disc may get scratched or broken, and
the player's internal parts may be damaged.
Don't put any container filled with liquid or any small metal objects on the player.
Be careful not to put your hand into the disc tray.
Don't place anything other than a disc in the disc tray.
Exterior influences such as lightning and static electricity can affect normal operation of
this player. If this occurs, turn the player off and on again with the POWER button, or
disconnect and then reconnect the AC power cord to the AC power outlet. The player will
operate normally.
Be sure to remove the disc and turn off the player after use.
ꢀ
ꢀ
Other Information
Download from Www.Somanuals.com. All Manuals Search And Download.
External connection
The unit can be simultaneously connected to VCR, LD player, VCD player, video camera and
other audio-video equipments for the better quality picture.
For the monaural devices, connect audio lead to Audio (L) jack
1. Under AV1 connection, connect the external equipment to the back panel of the unit as
shown in the figure below:
Video Output (VCR)
VIDEOIN
Audio Output (L Mono) (VCR)
L
AUDIO IN
Audio Output (R) (VCR)
R
2. The side A/Vjacks correspond to AV2 video mode.
TV/DVD combo
External device
1
V DE
2
L
D
3
R
4
External connection
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
TDX - 142
Model
Color system
Power Supply
Power consumption
Picture tube
NTSC
~120V 60Hz
85W
14"
2X1W
Audio output
Tuner type
181 channels, Quarts PLL Frequency synthesized
Infrared, direct access 43 keys, two batteries of AAA
1.5VX2
Remote type
VHF 2-13
UHF 14-69
CATV 1-125
Channel coverage
Antenna input
impedance
75ohm (VHF/UHF/CATV)
17.2" X16.6" X 14.6" (TV)
7.4" X2.0" X0.9" (Remote Control)
28.6lbs (TV)
Dimensions
(LXWXH)
Weight
0.24lbs (Remote Control)
“
Polaroid", “Polaroid and Pixel”, and “Polaroid Simplicity” are
trademarks of Polaroid Corporation, Waltham, MA, USA.
in the US call 1-866-289-5168.
26
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|