26” HD Widescreen LCD TV/DVD Combo
TDX-02610B
Questions? Need some help?
This manual should help you understand your new product.
If you have questions, call our toll-free number found on the
insert with this icon:
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC
Federal Communications
Commission Statement
This equipment has been tested and found to comply with the limits of a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
1. Reorient/Relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit which is different from what the receiver is
connected to.
4. Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user authority to operate the
equipment.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings and Precautions
Warnings and Precautions
To prevent any injuries, the following safety precautions should be observed in the installation, use,
servicing and maintenance of this equipment.
Before operating this equipment, please read this manual completely, and keep it nearby for future
reference.
This symbol is intended to alert the user to avoid the risk of electric shock.
This equipment must not be disassembled by anyone except qualified service personnel.
WARNING
This symbol is intended to alert the user to the presence of important operating and
maintenance instructions in the literature accompanying the appliance.
CAUTION
To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.
▪
▪
▪
▪
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Use of controls, adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
Important Safety Instructions
This symbol indicates caution points.
This symbol indicates actions that should not be done.
This symbol indicates actions that must be performed.
▪
▪
Do not place the equipment on any uneven or unstable carts, stands, tables, shelves etc.
The equipment may fall, causing serious injury to children or adults and serious damage to
the equipment itself.
Use only a cart or stand recommended by the manufacturer. This equipment and
recommended cart or stand should be handled with care. Quick stops, excessive force, and
uneven surfaces may cause the equipment and cart/stand to overturn.
▪
Do not disable the 3-wire grounding type plug. The grounding pin on the 3-prong plug is an
important feature. Removing the grounding pin will increase the risk of damaging the
equipment.
▪
▪
▪
If you can not fit the plug into the electrical outlet, contact an electrician to install a grounding
outlet.
Always operate this equipment from the type of power source indicated on the rear of the
serial/model plate.
Never overload wall outlets and extensions.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings and Precautions
▪
▪
Use and handle the power cord with care. Do not place any heavy objects on the AC
power cord.
Do not pull the AC power cord. Do not handle the AC power cord with a wet hand.
▪
▪
Do not touch the power cord and antenna cable during lightning.
Remove the plug from the wall outlet, if the equipment will not be used for a long period
of time.
▪
▪
Do not place, use or handle this equipment near water.
Never expose the equipment to liquid, rain, or moisture.
Seek for service if any of the above is spilled into the equipment.
▪
▪
Do not expose the equipment to extreme temperature or to direct sunlight, as the
equipment may heat up and suffer damage.
Do not install the equipment near any heat sources such as radiators, heat registers,
stoves, or any other apparatus that might produce heat.
▪
▪
Do not attempt to service the equipment yourself.
Opening and removing the covers may expose you to dangerous voltage or other
hazards and may void your warranty. Refer service to qualified personnel.
▪
▪
Do not place or drop any other objects on top.
Do not insert anything into the ventilation holes of your equipment.
Inserting any metal or flammable objects may result to fire or electric shock.
▪
▪
Protect the power cord from being walked on or pinchrd particularly at plugs ,convenience
receptacles, and the point where they exit from the apparatus.
Do not place the equipment on uneven or unstable carts, stands, tables, shelves etc. The
equipment may fall, causing serious injury to children or adults and serious damage to
the equipment itself.
Always place the equipment on the floor or on a surface that is sturdy, level, stable and
strong enough to support the weight of the equipment.
▪
Do not block any ventilating openings. Leave an open space around the equipment.
Never place the equipment :
on a bed, sofa, rug, or any other similar surfaces; too close to drapes/curtains/walls, in a
bookcase, built-in cabinet, or any other similar places that may cause poor ventilation.
▪
▪
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
▪
▪
Always remove the power cord from the outlet before cleaning the equipment.
Never use liquid or aerosol cleaners on the equipment.
Clean only with a soft dry cloth.
▪
Only use attachments/accessories specified by the manufacturer.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings and Precautions
Outdoor Antenna Safety Instructions
If an outdoor antenna is connected, follow the precautions below:
▪
▪
An outdoor antenna should not be located in any area where it could come in contact with
overhead power lines, or any other electric light or power circuits.
When installing an outdoor antenna system, extreme caution should be taken to prevent
contact with power lines. Direct contact with power lines may be fatal and should be avoided
at all costs.
Section 810 of National Electrical Code (NEC) provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for
the grounding electrode.
Antenna lead-in wire
Ground clamps
Antenna discharge unit
(NEC section 810-20)
Electric service
equipment
Grounding conductors
(NEC section 810-20)
Ground clamps
Power service grounding
(NEC Art250 part H)
NEC : National Electrical code
EXAMPLE OF OUTDOOR ANTENNA GROUNDING
4
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Federal Communications Commission Statement.......................... 1
Warnings and Precautions
Important Safety Instructions....................................................................................... 2
Antenna Safety Instructions......................................................................................... 4
Chapter 1 Introducing the LCD TV
Key Features ............................................................................................................... 6
Package Contents ....................................................................................................... 7
Setting Your LCD TV.................................................................................................... 8
Your LCD TV...............................................................................................................11
Your Remote Control ................................................................................................. 14
Chapter 2 Installing the LCD TV
Connecting a TV Cable or an Antenna ...................................................................... 18
Connecting a VCR..................................................................................................... 23
Connecting a Video Camera or Game Console ........................................................ 24
Connecting a DVD Player.......................................................................................... 26
Connecting a Digital TV Cable Box or Digital Satellite Receiver ............................... 27
Connecting an AV Equipment with HDMI Connector................................................. 28
Connecting an AV Equipment with DVI Connector.................................................... 29
Connecting a PC........................................................................................................ 30
Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System........................ 31
Chapter 3 USING THE FEATURES
Using The Built-in DVD....................................................................................32
Using The USB Storage and SD Card Reader...................................................34
Wide Screen Viewing ......................................................................................37
Using the Program Guide ................................................................................38
Operating the Menu........................................................................................39
Customizing the VIDEO Settings ......................................................................41
Customizing the AUDIO Settings ..................................................................... 43
Customizing the TV Settings ........................................................................... 45
Customizing the SETUP Settings......................................................................47
Using the Program Block Settings.....................................................................50
Specifications ........................................................................................................ 55
Programming your Remote Control......................................................... 56
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introducing the LCD TV
Chapter 1
Introducing the LCD TV
Key Features
Various Audio/Video terminals for external equipment connection
▪
▪
▪
▪
▪
▪
2 sets of composite A/V input terminals
1 set of S-VIDEO terminals
2 sets of component Video input terminals
1 VGA/ Audio input terminals
2 HDMI/Audio input terminals
1 set of Audio(L/R) output terminals
1 Headphone terminal
▪
Built-In Slot-type DVD Player
Supports DVD/SVCD/VCD/CD compatibility.
▪
Built-in SD Card Reader
Allows access to digital content stored on a SD card.
▪
Built-In USB Connector
The built-in TV tuner to receive HD ATSC
▪
This function allows the reception of HD broadcasting without the addition of a set top
box.
High Definition Multimedia Interface (HDMI)
▪
High Definition Multimedia Interface (HDMI) is a small, user-friendly interconnect that
can carry up to 5 Gbps of combined video and audio in a single cable. This system
eliminates the cost, complexity and confusion of multiple cables used to connect
current A/V systems.
HDTV Component Video Inputs
▪
Offers the best video quality for DVD (1080i, 720p) and digital set-top-box (1080i,
720p) connections.
3D Digital Noise Reduction
This function can digitally reduce image noise to provide better picture quality.
▪
Film-Mode Detection (3:2 Reverse Pull Down)
▪
This function can automatically detect content derived from film and adjust the
interlacer’s frame matching to provide a more natural-looking, clearer image of the
moving picture.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introducing the LCD TV
Package Contents
Make sure all of the following contents are included.
ꢀ
LCD TV
ꢀ
Bottom Stand /
Screw Driver and Screws (4)
ꢀ
Component Cable
ꢀ
Remote Control/
AAA Batteries x 2
ꢀ
VIDEO Cable
SET UP
CAB/
TV
DVD
AUX
SA
T
SLEEP
DVD MENU
VOL
CH
PAGE
MUTE
GUIDE
ASPECT
LAST
LIVE TV
PIP
MENU
OK
INFO
1
CC
EXIT
DVR
2
3
ABC
DEF
4
5
6
GHI
JKL
MNO
7
8
9
PQRS
TUV
WXYZ
INPUT
.
0
ENTER
ꢀ
Power Cord
ꢀ
AUDIO Cable
ꢀ
Warranty Card
ꢀ
User’s Manual
ꢀ
Quick Start Guide
ꢀ
Stand Assembly Guide
These items are all you need to set up and operate the LCD TV in its basic configuration.
Make sure all of the above contents are included in the package. If you are missing
any items, please contact the Polaroid customer service department.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introducing the LCD TV
Setting Up Your LCD TV
How to install the TV Stand
Read all instructions before continuing with the stand installation.
Attach the Stand the TV with the bottom foam packaging material still
attached.
a. Lift foam packaging material from the top of the LCD out of the box.
b. Lift LCD out of the box, with the bottom foam packaging material still attached, and place
onto a stable surface.
a
b
Protective bag
Stand
Shipping box
Table
c. Remove protective bag from LCD unit, but DO NOT remove the bottom foam packaging
material from the TV.
d. Locate the place on the back of the TV to attach the stand. Secure the stand to the LCD
with all six screws.
Unit
c
Table
Stand
Packaging material
d
Unit
Table
Screws
Stand
Packaging material
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introducing the LCD TV
How to remove the TV Stand
If you prefer to mount your new Polaroid TV on a wall instead of attaching it to the stand, please
reference the instructions included in the wall mounting kit (sold separately).
Verify your TV’s model and be sure to use the wall mounting kit specified
for your TV model only. Contact your technician for assistance when
installing the wall mounting kit.
ꢃ
ꢁ
To prevent damaging the surface of the LCD TV, place the TV on a soft cloth.
Soft cloth
Remove the screws of the table stand and detach the table stand from the TV.
Soft cloth
Table stand
ꢂ
Align the holes on the wall mounting hook units with the corresponding holes on the rear
of the TV and fasten four screws.
4 screws (supplied
with the wall mount
kit)
Wall mounting hook
unit (supplied with the
wall mount kit)
Soft cloth
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introducing the LCD TV
How to setup the TV
ꢃ
ꢁ
ꢂ
Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’s ANT. terminal
(refer to page18-22).
Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
Insert the 2 batteries supplied in remote control.
Step1 Slide the back cover up to open the
battery compartment of the remote
control.
Step2 Insert two AAA size batteries.
Make sure to match the (+) and
( - ) ends of the batteries with
the (+) and ( - ) ends indicated
in the battery compartment.
Slide the cover back into place.
Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner
etc.) on the remote, as it may suffer damage.
ꢄ
Connect other an external AV device (refer to page23-31).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introducing the LCD TV
Your LCD TV
Front/Right Side View and Controls
LED
The LED light indicates when the LCD TV is
activated.
IR
Infrared
Receiver
VOLUME+-
Adjusts the volume up and down. Selects the main-
menu item and change values for items when in the
OSD mode.
CHANNEL▲▼
Scans up and down through channels. Selects sub-
menu item when in the OSD mode.
MENU
Press once to display the OSD (on screen display),
press again to turn the OSD off.
INPUT
Chooses from different input signal sources.
Turns the LCD TV on and into standby mode.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introducing the LCD TV
Right Side View and Controls
VIDEO1 IN
Connects to the composite Video and
Audio output jacks on external video
equipment.
VIDEO
L
R
VIDEO1 IN
HEADPHONE
Connects to the external headphone
for private listening.
USB
Allows access to digital content stored on
a USB storage : MP4/JPEG
BUILT-IN SD CARD READER
Allows access to digital content stored on a
SD card : JPEG/MPEG1/MPEG2/MPEG4
/
PLAY/PAUSE
/
STOP/EJECT
SLOT-TYPE DVD PLAYER
Any of the following disc types can
be played on the DVD player: DVD/VCD/CD/CD-
R/CD-RW/JPEG/KODAK PICTURE CD/WMA/
DVD+R/RW/DVD-R/RW/MPEG-4
.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introducing the LCD TV
Rear View and Jacks
VIDEO2 IN
Connects to the composite VIDEO and AUDIO(L/R) output jacks on external video equipment.
HDMI1 IN/HDMI2 IN
Connects the all digital AV equipment with HDMI connector.HDMI supports enhanced,
high-definition video and two-channel digital audio. The AUDIO(L/R) of HDMI IN is for
DVI connection.
S-VIDEO IN
Connects to the S-VIDEO and AUDIO(L/R) output jacks on external
video equipment.
VGA IN
Connects the PC, or other AV equipment with VGA and
AUDIO(L/R) output jacks.
YPbPr1 IN/YPbPr2 IN
Connects to the DVD player, Digital Set-Top-Box, or other AV
equipment with component(YPbPr) video and audio output jacks.
AUDIO OUT-STEREO
Connects to the AUDIO(L/R) input jacks on AV equipment.
AUDIO OUT-DIGITAL-OPTICAL/COAXIAL
Connects to the DIGITAL AUDIO jack on the digital/standard 5.1
audio system.
HDTV/TV AIR/CABLE
Connects RF input from VHF/UHF antenna or cable
to receive high/standard definition television.
AC IN
Connects to the AC power cord.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introducing the LCD TV
Your Remote Control
This package includes a Polaroid remote that enables control of up to four devices.
To select a device, simply select one of the following device mode controls: TV, CBL/SAT, DVD/VCR,
or AUDIO.
Turns the LCD TV on and off
1
2
SET UP
TV
2
3
1
4
CAB/
SAT
SET UP
Remote control universal code setup.
For more information on setting up your
remote control, please see the
DVD
AUX
SLEEP
DVD MENU
“Programming Your Remote Control”
section (refer to page 56)
5
3
TV
Controls the LCD TV/Built-in DVD/USB /
SD card reader.
6
VOL
CH
PAGE
7
CAB/SAT Controls Cable Converter or Satellite
Receiver
8
9
10
LAST
MUTE
GUIDE
ASPECT
DVD
AUX
Controls DVD player or Video player
LIVE TV
PIP
MENU
Controls Audio Amplifier
11
OK
4
SLEEP
Cycles through the LCD TV sleep time:
OFF/10/20/30/40/50/60/90/120 mins
5
ꢀꢁ ►ꢂ Other device function keys
ꢃ ꢄ ꢅ ꢆ
EXIT
INFO
1
CC
DVR
2
3
ABC
DEF
6
7
VOL+-
Increases and decreases volume
Change channel up and down
5
6
4
JKL
MNO
GHI
7
9
8
PQRS
WXYZ
TUV
CH▲▼
ASPECT
INPUT
.
0
ENTER
8
9
Cycles through Wide mode settings:
NORMAL/FULL/WIDE/ZOOM
MUTE
Pressing once mutes audio. Pressing
again restores audio
10
11
LAST
Returns to previously selected channel
GUIDE
In TV mode, pressing GUIDE displays
the Program Guide on the screen
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introducing the LCD TV
12
13
14
PIP
Other device function key
SET UP
TV
MENU
Displays the OSD menu on the
screen.
CAB/
SAT
DVD
AUX
SLEEP
DVD MENU
◄ ►▲▼,OK Cycles through OSD options and selects
individual menu items. OK confirms option
settings
OK
In TV mode, pressing OK to display a
channel list
VOL
CH
PAGE
INFO
Displays information on the LCD TV
screen such as input source, channel,
program title.
15
LAST
MUTE
GUIDE
ASPECT
12
13
LIVE TV
PIP
16 CC
Cycles through the Closed Caption:
ꢅAnalog Closed Caption:OFF/CC1/
CC2/CC3/CC4/Text1/Text2/Text3/
Test4
MENU
ꢅDigital Closed Caption:
Allow to set the digital closed caption
OK
14
EXIT
Exits the OSD menu
17
18
15
16
17
EXIT
INFO
1
CC
DVR
0-9/ENTER Pressing a number selects a channel.
Following selection, pressing ENTER
activates the channel, or channel
2
3
ABC
DEF
5
6
4
JKL
MNO
activates automatically in 3 seconds
GHI
18
19
7
9
8
PQRS
WXYZ
TUV
INPUT
Pressing INPUT to display a source
list, use ▲▼ to select the video
equipment connected to the video
inputs of your LCD TV:
19
INPUT
.
0
ENTER
Input Source
TV(CABLE/AIR)
VIDEO1 (SIDE)
VIDEO2 (REAR)
VIDEO3 (S-VIDEO)
VIDEO4 (YPbPr1)
VIDEO5 (YPbPr2)
DVD
USB
CARD READER
VIDEO6 (HDMI1)
VIDEO7 (HDMI2)
COMPUTER(VGA)
▪
In TV mode, use with 0-9 and ENTER
buttons to select a digital channels.
Effective range:
The remote can control the LCD TV from up to 5m away, if pointed directly at the receiver.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introducing the LCD TV
Controlling The Built-in DVD
Press the TV button once to activate the built-in DVD control keys, the following functions are preset to
operate the built-in DVD:
DVD MENU Press to display the menu of a DVD
1
2
3
disc.
SET UP
TV
While playing, press to jump to the
previous/next chapter or track.
CAB/
SAT
DVD
AUX
1
4
SLEEP
2
3
DVD MENU
Pressing this button during playback
advances/reviews playback; speed
increases with each pressing:
2x/4x/8x/16x/32x
5
6
Normal playback.
4
5
VOL
CH
PAGE
7
While playing, press this button to stop
playing.
8
9
LAST
MUTE
GUIDE
ASPECT
While playing, press this button once to
pause playing, press once again to
resume playing.
6
LIVE TV
PIP
MENU
10
11
7
8
VOL+-
Increases and decreases volume.
ASPECT
Cycles through Wide mode settings:
NORMAL/FULL/WIDE/ZOOM
OK
MUTE
Pressing once mutes audio. Pressing
again restores audio.
9
12
EXIT
INFO
1
CC
13
DVR
GUIDE
Displays the Built-in DVD Setup Menu
on the screen.
10
11
2
3
ABC
DEF
5
6
4
JKL
MNO
GHI
◄ ►▲▼,OK Cycles through Built-in DVD OSD
options and selects individual menu
7
9
8
PQRS
WXYZ
TUV
items. OK confirms option settings
INPUT
.
0
ENTER
12 INFO
13 EXIT
Displays current information on screen
during playback.
Press this button to eject the disc.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introducing the LCD TV
Controlling The USB Storage and SD Card Reader
Press the TV button once to activate the built-in USB and SD Card Reader control keys, the following
functions are preset to operate the USB Storage and SD Card: For more information on setting up your
USB storagnd adn card reader, please see the “Using the USB Storage and SD Card Reader” section.
DVD MENU Press to display FILE MENU.
1
2
SET UP
TV
Press to go to the next or previous
image.
CAB/
SAT
DVD
AUX
1
3
SLEEP
3
4
5
Normal playback.
2
DVD MENU
Press to display the thumbnail album.
4
5
While Slide show, press this button
once to pause playing, press once
again to resume playing.
VOL
CH
PAGE
6
6
7
VOL+-
Increases and decreases volume.
7
8
ASPECT
Cycles through Wide mode settings:
NORMAL/FULL/WIDE/ZOOM
LAST
MUTE
GUIDE
ASPECT
LIVE TV
PIP
MENU
8
9
MUTE
Pressing once mutes audio. Pressing
again restores audio.
◄ ►▲▼,OK In FILE MENU and thumbnail album,
Press to move the highlight bar to a file,
then press OK to confirm the selected
file.
9
OK
EXIT
INFO
1
CC
►▼
While image displaying, press to rotate
an image 90 degrees in a clockwise or
counterclockwise.
DVR
2
3
ABC
DEF
5
6
4
JKL
MNO
GHI
7
9
8
PQRS
WXYZ
TUV
INPUT
.
0
ENTER
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Chapter 2
Installing the LCD TV
Refer to the owner’s manual of any external equipment to be connected.
When connecting any external equipment, do not connect any AC power cords to wall outlets
until all other connections are completed.
Connecting a TV Cable or an Antenna
Antenna Connection
The antenna requirements for good color TV reception are more important than those for a black &
white TV reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connection that is provided with the various antenna
systems.
■
A 75-ohm system is generally a round cable (not included) with F-
type connector that can easily be attached to a terminal without
tools.
F-type connector
75-ohm coaxial cable (round)
■
A 300-ohm system is a flat twin-lead cable (not included) that can
be attached to a 75-ohm terminal through a 300-75-ohm adapter
(not included).
300-ohm twin-lead cable (flat)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Use one of the following two diagrams when connecting an outdoor antenna.
A: Shows how to use a VHF/UHF combination outdoor antenna.
B: Shows how to use a separate VHF and/or UHF outdoor antenna.
A. Combination VHF/UHF antenna
VHF/UHF
Antenna
300/75-ohm adapter
(not included)
VHF/UHF
Antenna
300-ohm twin-
lead cable
75-ohm
coaxial cable
B. Separate VHF and/or UHF antennas
UHF
Antenna
Combiner
(not included)
300-ohm twin-
lead cable
IN
OUT
75-ohm
coaxial cable
VHF
Antenna
300-ohm twin-
lead cable
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Cable TV (CATV) Connection
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the
National Electrical Code (NEC) that provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding system of the building
accurately, or as close to the point of cable entry as possible. Use of this TV for other than
private viewing of programs broadcasted on UHF, VHF or transmitted by cable companies for
the use of the general public may require authorization from the broadcast/cable company, and/
or program owner.
■
■
A 75-ohm coaxial cable connector is built into the set for easy hookup.
When connecting the 75-ohm coaxial cable to the set, connect the 75-
ohm cable into the ANT. terminal.
Some cable TV companies offer premium pay channels. Since the
signals of these premium pay channels are scrambled, a cable TV
converter/descrambler is generally provided to the subscriber by the
cable TV company.
This converter/descrambler is necessary for normal viewing of scrambled channels.
(Set your TV to channel 3 or 4, typically one of these channels is used. If this is unknown,
consult your cable TV company.)
For more specific instructions on installing cable TV, consult your cable TV company.
One possible method of connecting the converter/descrambler provided by your cable TV
company is shown in the diagram below.
RF switch
(not included)
2 set signal
splitter
(not included)
A
IN
B
Cable TV Line
OUT
Cable TV converter/
descrambler
VHF/UHF IN
(not included)
■ The RF switch (not included) is required to provide two inputs (A and B). Setting
the RF switch to position A allows viewing of all unscrambled channels by using
the TV channel keys.
■
Setting the RF switch to position B allows viewing of all scrambled channels via
the converter/descrambler by using the converter channel keys.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
ꢃ
ꢁ
Use a supplied antenna cable to connect the TV signal to the LCD TV’s TV CABLE terminal.
HDTV/TV
AIR/CABLE
VHF/UHF IN
Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
HDTV/TV
AIR/CABLE
VHF/UHF IN
This TV is equipped with a safety fuse. In the event of an electrical storm or power outage
the safety fuse is designed to protect your TV. If your TV has no power, check the fuse by
prying the cover off, following the illustration below.
If the fuse is blown, visit your local hardware store and ask for a 4A 250V - 5x20mm Time
Lag Fuse (Slow Blow) to replace the fuse.
Firm Plastic Prying Tool
(Using a metal tool may cause shock)
4A 250V
5x20mm
Back of TV
Fuse
BE SURE TO UNPLUG AC POWER CORD BEFORE REMOVING THE FUSE.
ꢂ
Press the button on the remote to turn on the LCD TV.
Always disconnect the LCD TV from the main voltage when the LCD TV will not
be used for a long period of time. The POWER button on the front panel is only
used for switching the LCD TV into standby, it does not disconnect the device
from the main voltage. To completely disconnect the main voltage, please
remove the power plug from the socket.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
ꢄ
Press the INPUT button on the remote to display the Input List. Use the ▲▼ buttons to
select TV and press the OK button.
Main
ꢇ
TV(CABLE/AIR)
VIDEO1 (SIDE)
VIDEO2 (REAR)
VIDEO3 (S-VIDEO)
VIDEO4 (YPbPr1)
VIDEO5 (YPbPr2)
DVD
USB
CARD READER
VIDEO6 (HDMI1)
VIDEO7 (HDMI2)
COMPUTER(VGA)
ꢇ
Press the MENU button on the remote control to display the Main menu, and use the ◄►
buttons to select the TV.
Channel Scan
Tuner Mode
Channel Skip
Time Zone
Cable
Eastern Time
TV
Select
Exit
ꢈ
ꢆ
Press the ▼ button to select Channel Scan, and press the OK button.
The Channel Scan automatically creates a list of receivable channels. Press the MENU
button at any time to interrupt the memorization process.(the list cannot be created if
interrupted)
The Channel Scanning will create a list of receivable channels for the current
input (antenna or cable). You will be required to run Channel Scanning for each
RF input to create a list of available channels from both inputs.
Press the OK button to display the received channel list, then press ▲▼ to select a
channel. Or, use the ▪ (INPUT button) with 0-9 buttons to select digital channel( for
example 9.1)
Channel List
5-2 RF5-2
9-1 KQED-HD
9-2 KOED-SD
8
CCT
12
13
15
The digital main channel might include many subchannels (for example 9-1, 9-
2..) that are showing program at the same time.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Connecting a VCR
Rear of TV
AUDIO Cable
S-VIDEO Cable
AV Cable
A
B
ꢃ
ꢁ
METHOD A:
Use a composite cable to connect the VCR’s composite video/audio jacks to the LCD TV’s
VIDEO2 IN jacks.
METHOD B:
Use an audio cable to connect the VCR’s audio output jacks to the LCD TV’s audio
inputs. Use a S-Video cable to connect the VCR’s s-video output jack to the LCD TV’s
S-VIDEO IN input jack.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
ꢂ
ꢄ
Press the
button on the remote to turn on the LCD TV.
To watch a videotape, press the INPUT button on the remote to select
VIDEO2( METHOD A), or VIDEO3 (METHOD B).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Connecting a Video Camera or Game console
Rear of TV
Right Side
VIDEO
L
R
VIDEO1 IN
AUDIO Cable
or
S-VIDEO Cable
GAME CONSOLE
B
A
AV Cable
ꢃ
ꢁ
METHOD A:
Use a composite cable to connect the video camera’s or game console’s composite
video/audio jacks to the LCD TV’s VIDEO2 IN jacks or VIDEO1 IN jacks.
METHOD B:
Use an audio cable to connect the video camera’s or game console’s audio output
jacks to the LCD TV’s audio inputs. Use an S-Video cable to connect the video
camera’s or game console’s s-video output jack to the LCD TV’s S-VIDEO IN input
jack.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
ꢂ
ꢄ
Press the button on the remote to turn on the LCD TV.
To watch a video vis camera or game console, press the INPUT button on the remote
to select VIDEO2/VIDEO1( METHOD A), or VIDEO3 (METHOD B).
Not all cameras have the ability to connect to a TV. Please check your video camera
user guide for compatibility.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Connecting a DVD Player
Rear of TV
or
Pb Pr
COMPONENT/AUDIO Cable
AUDIO Cable
S-VIDEO Cable
AV Cable
Pb Pr
A
B
C
DVD PLAYER
ꢃ
METHOD A:
Use a composite cable to connect the DVD player’s composite video/audio jacks to the
LCD TV’s VIDEO2 IN jacks.
METHOD B:
Use an audio cable to connect the DVD player’s audio output jacks to the LCD TV’s
audio inputs. Use an S-Video cable to connect the DVD player’s s-video output jack
to the LCD TV’s S-VIDEO IN input jack.
METHOD C:
Use a component cable to connect the DVD player’s component output jacks to the LCD
TV’s YPbPr1 IN or YPbPr2 IN input jacks.
Use an audio cable to connect the DVD player’s component audio jacks to the LCD TV’s
audio input jacks.
The component video jacks on your DVD player are sometimes labeled
YPbPr, or YCbCr. For an explanation of component video, see your DVD
player’s user guide.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
ꢁ
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
ꢂ
ꢄ
Press the button on the remote to turn on the LCD TV.
To watch a DVD, press the INPUT button on the remote to select
VIDEO2( METHOD A), or VIDEO3 ( METHOD B), or VIDEO4/VIDEO5 (METHOD C).
For best picture quality, if your equipment has component video output, use
a component cable instead of a composite video or S-video cable.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Connecting a Digital TV Cable Box or Digital Satellite Receiver
Rear of TV
Pb Pr
COMPONENT/AUDIO Cable
Pb Pr
ꢃ
Use a component cable to connect the satellite receiver’s/TV Cable Box’s component
(YPbPr1) output jacks to the LCD TV’s component input jacks.
Use an audio cable to connect the satellite receiver’s/TV Cable Box’s component audio
jacks to the LCD TV’s audio input jacks.
ꢁ
ꢂ
ꢄ
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
To watch programs via satellite receiver or TV Cable Box, press the INPUT button on
the remote to select VIDEO4/VIDEO5.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Connecting an AV Equipment with HDMI Connector
Rear of TV
HDMI Cable
AV EQUIPMENT
ꢃ
ꢁ
Use a HDMI cable to connect the AV equipment’s HDMI output jack to the LCD TV’s HDMI IN
jacks.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
ꢂ
ꢄ
Press the button on the remote to turn on the LCD TV.
Press the INPUT button on the remote to select VIDEO6 or VIDEO7.
The HDMI connector provides both video and audio signals, it’s not
necessary to connect the audio cable.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Connecting an AV Equipment with DVI Connector
Rear of TV
AUDIO Cable
AUDIO
L
R
DVI IN
HDMI-to-DVI Cable
AV EQUIPMENT
ꢃ
ꢁ
Use a HDMI-to-DVI cable to connect the AV equipment’s DVI output jack to the LCD TV’s
HDMI IN jacks.
Use an audio cable to connect the AV equipment’s audio output jacks to LCD TV’s HDMI
AUDIO jacks.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
ꢂ
ꢄ
Press the button on the remote to turn on the LCD TV.
Press the INPUT button on the remote to select VIDEO6 or VIDEO7.
If the LCD TV is connected to AV equipment’s DVI connector, you will need
an HDMI-to-DVI cable or an HDMI adapter(not suplied) and an audio cable.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Connecting a PC
Rear of TV
AUDIO Cable
VGA Cable
PC
ꢃ
ꢁ
Use a D-SUB cable to connect the PC’s D-SUB output jack to the LCD TV’s VGA input
jack. Use an audio cable to connect the PC’s audio output jacks to LCD TV’s.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
ꢂ
ꢄ
Press the button on the remote to turn on the LCD TV.
Press the Input button on the remote to select COMPUTER.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System
For better sound quality, you may want to use a Home Theater/Stereo System.
NOTE: If you have a Home Theater/Stereo System that you would like to use with your new TV, we
recommend that you do NOT use your TV’s audio output for this connection. For the best sound
quality, our product testing has shown that you should connect your Home Theater/Stereo System
directly to your A/V device. I.E. You should connect your Home Theater/Stereo System to your DVD
player, Cable/Satellite box or other AV equipment. Although not recommended, if you prefer to use
the TV audio output to make this connection to your Home Stereo System, please follow the
instructions below.
AUDIO Cable
A
Audio Receiver
Audio Amplifier
ꢃ
ꢁ
Connecting to Audio Receiver:
Use an audio cable to connect the audio receiver’s audio LINE IN jacks to LCD TV’s
AUDIO OUT jacks.
Connecting to Digital 5.1 Sound System:
METHOD A:
Use a coaxial cable to connect the audio amplifier’s COAXIAL IN jacks to LCD TV’s
COAXIAL OUT jacks.
ꢂ
ꢄ
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Chapter 3
USING THE FEATURES
Using The Built-in DVD
ꢃ
ꢁ
Turn your LCD TV on.
Insert a disc (DVD, VCD, SVCD, or audio CD).
NOTE: The printed side of the disk should face the front of the TV.
ꢅ TO INSERT A DISC
ꢅ TO REMOVE A DISC
Any of the following disc types can be
played on the DVD player: DVD-Video/DVD
R/RW/SVCD/VCD/CD/CD-R/CD-RW.
When removing the disc, do not
attempt to pull it from its slot. Please
push the EJECT button as
illustrated below.
Push
Insert
ꢂ
Press the Input button on the remote, use ▲▼ to select DVD and press
the OK button.
Input Source
TV(CABLE/AIR)
VIDEO1 (SIDE)
VIDEO2 (REAR)
VIDEO3 (S-VIDEO)
VIDEO4 (YPbPr1)
VIDEO5 (YPbPr2)
ꢇ
DVD
USB
CARD READER
VIDEO6 (HDMI1)
VIDEO7 (HDMI2)
COMPUTER(VGA)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
ꢄ
Press GUIDE button on the remote control to display the Built-in DVD Setup Menu:
ꢅ USING THE BUILT-IN DVD SETUP MENU
1. Use the ▲▼◄► on the remote control to to move the light bar to the option you want,
press the OK button.
2. During playback, the following operations are available:
ꢅ
ꢅ
ꢅ
ꢅ
ꢅ
ꢅ
ꢅ
ꢅ
EJECT
PLAY
Stops playback.
Starts playback.
Get slow motion effect during playback
Jumps to the previous/next chapter or track.
Gets different playback forward/backward speeds.
While playing, pause playback temporarily
Press to select the Audio effect and Language.
Changes DVD subtitle language. When this icon is
highlighted you must press the OK button to change the
language selections.
F.FWD/NEXT
REW./PREV.
PAUSE
AUDIO
SUBTITL
ꢅ
CAMERA ANGL
Press to select the desired camera angle disc.
ꢇ
The Built-in DVD player can playback JPEG format pictures and audio files on a
personally recorded CD-R/RW disc. After loading all files, the File Menu will show the
contents of the disc:
001/015
01 P107001
02 P107002
03 P107003
04 P107004
05 WOFSON
06 HDCP
07 EDIT
00:00
00:00
ꢅ Press ▲▼ to select an image and press the
button to play the file.
ꢅ Press ▲▼ to select the folder and then press ► to enter the folder. Press the ENTER
button to active and press ▲▼ to select a file. Press ◄ to back the File Menu.
ꢅ While an image is displayed, press the DVD MENU button to display the File Menu.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Using The USB Storage and SD Card Reader
ꢃ
ꢁ
Turn your LCD TV on.
Insert a USB device/SD card that contains JPG/JPEG/MPG/WMA/DAT files.
ꢅ TO INSERT A USB STORAGE
Allows the insertion of a USB storage.
You can view digital images or music in
a USB storage on your TV.
ꢅ TO INSERT A SD CARD Reader
Allows the insertion of a SD card. You
can view digital images or music.
Insert
Insert
BesuretoinserttheUSBstorageorSDcardinthecorrectdirection.IftheUSBstorageor
SD card is forced in the wrong way, it may cause damage.
ꢂ
Press the Input button on the remote, use ▲▼ to select a input source and
press the OK button.
ꢅ TO INSERT A USB STORAGE
ꢅ TO INSERT A SD CARD Reader
Input Source
TV(CABLE/AIR)
VIDEO1 (SIDE)
VIDEO2 (REAR)
VIDEO3 (S-VIDEO)
VIDEO4 (YPbPr1)
VIDEO5 (YPbPr2)
DVD
Input Source
TV(CABLE/AIR)
VIDEO1 (SIDE)
VIDEO2 (REAR)
VIDEO3 (S-VIDEO)
VIDEO4 (YPbPr1)
VIDEO5 (YPbPr2)
DVD
USB
ꢇ
USB
ꢇ
CARD READER
VIDEO6 (HDMI1)
VIDEO7 (HDMI2)
COMPUTER(VGA)
CARD READER
VIDEO6 (HDMI1)
VIDEO7 (HDMI2)
COMPUTER(VGA)
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
ꢄ
After loading all files, the File Menu will show the contents of the USB device:
001/015
01 P107001
02 P107002
03 P107003
04 P107004
05 WOFSON
06 HDCP
07 EDIT
00:00
00:00
DonotswitchtheInputSourcebetweenUSBandCARDREADERwhilethedataisbeing
read. It may cause data loading failure.
ꢅ Press ▲▼ to select an image and press the
button to play the file.
ꢅ Press ▲▼ to select the folder and then press ► to enter the folder. Press the ENTER
button to active and press ▲▼ to select a file. Press ◄ to back the File Menu.
ꢅ While an image is displayed, press the DVD MENU button to display the File Menu.
ꢇ
ꢅ RUNNGING A SLIDE SHOW
1. Press ▲▼ on the remote control to move the light bar to the file you want to play,
and press the OK button to play the file.
2. While an image is displayed full size, you can pause the slide show by pressing
.
3. Press
on the remote control to go to the next or previous image.
ꢅ USING THE THUMBNAIL ALBUM
1. Press button on the remote control to display the thumbnail album.
Slide Show ◄Prev Next►
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
2. Press ▲▼◄ on the remote control to move the light bar to the image you
want to play, and press the OK button to play the file.
Slide Show ◄Prev Next►
3. ꢅSlide Show: Press ▲▼◄ to highlisht Slide Show and press the OK
button, to display all the images recorded on the SD card/USB storage.
ꢅPrev/Next: Press ▲▼◄ to highlisht Prev/Next and press the OK button,
to go to the previous or next page of the thumbnail album.
ꢅ ROTATING PICTURES
1. Press ◄► on the remote control to to rotate the picture clockwise or
counterclockwise in 90-degree increments.
2. Press
.
on the remote control to go to the next or previous image.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Wide Screen Viewing
Wide Screen function allows viewing of 4:3/16:9 images in wide screen mode, cycling through
the following wide screen settings. Press the ASPECT button repeatedly to select the screen
format you want.
ꢃ
NORMAL
Displays at 4:3 aspect ratio
NORMALisnotavailablewhenyouarewatching720por1080isource.
ꢁ
FULL
Stretches the image vertically and
horizontally to keeps the image size
consistent in the center of the screen and
stretches the sides
ꢂ
ꢄ
WIDE
Stretches the image vertically and
horizontally to fill the screen at 1:1.85
aspect ratio
ZOOM
Stretches the image vertically and
horizontally to fill the screen at 1:2.35
aspect ratio
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Using the Program Guide
The Program Guide feature brings all sorts of information to your screen, such as program title,
program duration, time remaining, rating information, closed caption, availability, etc.
ꢃ
ꢁ
With the LCD TV connected to a television programming source, press the INPUT button
on the remote control and use the ▲▼ buttons to select TV and press the OK button.
Press the GUIDE button on the remote control, the Program Guide will appear on the
screen:
Monday 15 January 2007 2:36:26 PM
3-1
7-2 KQED-SD
7-2
Today
Today
Today
7:00 PM
7:30 PM
9:30 PM
EYEWITHNESS NEWS 4PM
ABC WORLD NEWS
cc
cc
cc
cc
ABC’S MONDAY NIGHT FOOTBALL
SPORTSZONE
Tomorrow 12:30 AM
ꢂ
ꢄ
Press the ◄► button to select the channel.
Press the ▲▼ button to select the program from a list, the Program Guide provides
introduction about the current program being shown on each channel.
The Program information in the guide is provided by the broadcasters. It may sometimes
include only the channel number, without a program title or description.
Monday 15 January 2007 2:36:26 PM
3-1
7-2 KQED-SD
7-2
Today
Today
Today
7:00 PM
7:30 PM
9:30 PM
EYEWITHNESS NEWS 4PM
ABC WORLD NEWS
cc
cc
cc
cc
ABC’S MONDAY NIGHT FOOTBALL
SPORTSZONE
Tomorrow 12:30 AM
5:00 PM - 5:30 PM Mon, 20 Jan.
EYEWITHNESS NEWS
TV-PG
ꢇ
Press the GUIDE button again on the remote control to exit the Program Guide
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Operating the Menu
ꢃ
ꢁ
Press the button to turn the LCD TV on.
Press the MENU button on the remote control, the on-screen menu will appear on the
screen. Use the ◄► buttons to select your main menu option.
VIDEO MENU:
Allows you to make adjustments to your picture settings.
▪
If the signal source is TV, the VIDEO MENU
appears as:
▪
If the signal source is Video/S-Video/YPbPr/VGA/
HDMI, the VIDEO MENU appears as:
Picture Mode
Contrast
User
Picture Mode
Contrast
User
50
54
54
0
50
54
Brightness
Saturation
Brightness
Color Temperature
Noise Reduction
VGA
Hue
Medium
Sharpness
Color Temperature
Noise Reduction
5
Medium
Video
Select
Exit
Video
Select
Exit
AUDIO MENU:
Allows you to customize the audio options and effects.
▪
If the signal source is VIDEO/S-VIDEO/YPbPr/
HDMI/VGA, the AUDIO MENU appears as:
▪
If the signal source is TV, the AUDIO MENU
appears as:
Bass
50
50
0
Bass
50
50
0
Treble
Treble
Balance
Balance
Sound Effect
Speaker
Surround
On
Sound Effect
MTS
Surround
Stereo
SPDIF Type
Audio Language
Speaker
Dolby Digital
English
On
Audio
Select
Exit
Audio
Select
Exit
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
TV MENU:
Allows you to edit and label channels.
Channel Scan
Tuner Mode
Channel Skip
Time Zone
Cable
Eastern Time
TV
Select
Exit
SETUP MENU:
Allows you to set up a variety of features: Language, Closed Caption, factory reset, Parental Control, sleep
timer.
▪
If the signal source is TV, the SETUP MENU
appears as:
▪
If the signal source is HDMI/VGA/Video/S-Video/
YPbPr, the SETUP MENU appears as:
OSD Language
Time Setup
Closed Caption
Parental
English
Middle
OSD Language
Time Setup
Parental
English
Middle
Gamma
Gamma
Reset Default
Reset Default
Setup
Select
Exit
Setup
Select
Exit
ꢂ
ꢄ
Use the ▲▼ buttons to highlight the option of the sub-menu, and press the OK
button. While in adjustment mode, and use the ◄► buttons to change the value of
the item.
Press the EXIT button to exit the menu.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Customizing the VIDEO Settings
ꢃ
ꢁ
Press the button to turn the LCD TV on.
Press the MENU button on the remote control to display the Main menu, and use the ◄►
buttons to select the VIDEO.
ꢂ
Use the ▲▼buttons to highlight an individual VIDEO option, use the ◄► buttons to
change the setting, and press the MENU to exit the menu
▪
If the signal source is TV, the VIDEO MENU
appears as:
▪
If the signal source is VGA/Video/S-Video/YPbPr/
HDMI, the VIDEO MENU appears as:
Picture Mode
Contrast
User
Picture Mode
User
50
54
54
0
Contrast
50
54
Brightness
Saturation
Brightness
Color Temperature
Noise Reduction
VGA
Hue
Medium
Sharpness
Color Temperature
Noise Reduction
5
Medium
Video
Select
Exit
Video
Select
Exit
ꢄ
The VIDEO menu includes the following options:
Picture Mode
Contrast
Cycles among display types: Vivid/Hi-Bright/Cinema/Sport/User
Controls the difference between the brightest and darkest regions of
the picture
Brightness
Saturation
Hue
Controls the overall brightness of the picture
Controls the color intensity
Controls the difference between the green and red regions of the
picture
Sharpness
Increase this setting to see crisp edges in the picture; decrease it for
soft edges
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Color temperature
Adjusts color components independently to achieve a warm or cool
effect: Cool/Middle/Warm/User
▪ Warm: Increases red tint
▪ Nature : Increases natural tint
▪ Cool :
Increases blue tint
▪ User : Allows the user to adjust red, green and blue color
component levels independently.
Color Temperature
R Gain
User
120
120
120
G Gain
B Gain
Color Temperature
Select
Exit
Noise Reduction
VGA
Select to reduce the noise level of connected equipment: Off/Low/
Medium/Strong.
Press the OK button to enter the VGA Setting:
Auto Adjust
H.Position
V. Position
Clock
72
31
127
31
Phase
VGA
Select
Exit
▪
Auto Adjust
Press the OK button to automatically adjust
the display settings to optimize performance
based on the VGA mode
▪
▪
▪
▪
H. Position
V. Position
Clock
Adjusts the position of the picture left and right
in the window
Adjusts the position of the picture up and down
in the window
Controls the width of the picture based on the
VGA mode
Phase
Controls the signal phase, which can improve
focus clarity and image stability based on the
VGA mode
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Customizing the AUDIO Settings
ꢃ
ꢁ
Press the button to turn the LCD TV on.
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the AUDIO.
ꢂ
Use the ▲▼buttons to highlight an individual AUDIO option, use the ◄► buttons to
change the setting, and press the MENU to exit the menu
▪
If the signal source is VIDEO/S-VIDEO/YPbPr/
HDMI/VGA, the AUDIO MENU appears as:
▪
If the signal source is TV, the AUDIO MENU
appears as:
Bass
50
50
0
Bass
50
Treble
Treble
50
0
Balance
Sound Effect
Speaker
Balance
Surround
On
Sound Effect
MTS
Surround
Stereo
SPDIF Type
Audio Language
Speaker
Dolby Digital
English
On
Audio
Select
Exit
Audio
Select
Exit
ꢄ
The AUDIO menu includes the following options:
Bass
Controls the relative intensity of lower-pitched sounds
Controls the relative intensity of higher pitched sounds
Treble
Balance
Adjusts the relative volume of the speakers in a multiple speaker
system
Sound Effect
MTS
Allows selection of an audio-enhancement technique from among the
following options: Surround/Live/Dance/Techno/Classic/Soft/Rock/
POP/Off
Allows you to listen to high-fidelity stereo sound while watching TV
▪ Stereo:
Use separate audio tracks for left and right speakers, if available
▪ SAP:
You can enjoy a second audio program from the speakers while
watching a scene in the original program
▪ Mono:
Allows mono output (useful when stereo is noisy or inconsistent)
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
SPDIF Type
Allows to selection of the digital sound format: PCM/OFF/Dolby
Digital
▪
▪
▪
PCM:
The external audio system is connected to the AUDIO OUT (L/R)
of the LCD TV
Dolby Digital:
The external audio system is connected to the AUDIO OUT
DIGITAL (OPTICAL or COAXIAL) ot the LCD TV
OFF:
Select OFF to turn off the external audio system
Audio Language
Speaker
Allows to select the audio language:English/Spanish/French.
Allows to select to turn on or off the TV speakers.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Customizing the TV Settings
ꢃ
ꢁ
Press the button to turn the LCD TV on.
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the TV.
ꢂ
Use the ▲▼buttons to highlight an individual TV option, use the ◄► buttons
changes the setting, and press the MENU exits the menu.
Channel Scan
Tuner Mode
Channel Skip
Time Zone
Cable
Eastern Time
TV
Select
Exit
ꢄ
The TV menu includes the following options:
Channel Scan
Tuner Mode
Press the OK button, the Channel Scanning automatically
creates a list of receivable channels.
Allows selection between CATV cable and antenna signal sources:
▪ AIR
Choose this setting if you are receiving TV channels with an antenna
(over the air)
▪ Cable
Choose this setting if you are receiving TV channels with a CATV
(cable TV)
Channel Skip
Allows addition/removal of channels on the channel list.
ꢃPress the OK button to display the Channel Skip menu:
2
3
4
5
6
7
8
9
ABC
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
DISC
10
Channel Skip
Select
Exit
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
ꢁPress the ▼ button to select the desired channel, andpress the
OK button repeatedly to select show (ꢀ) or hide(ꢈ)
Time Zone
Allows selection of regional TV systems of USA: Eastern Time/
Indiana/Central time/Mountain Time/Arizona/Pacific Time/Alaska/
Hawaii
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Customizing the SETUP Settings
ꢃ
ꢁ
Press the button to turn the LCD TV on.
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the SETUP.
ꢂ
Use the ▲▼buttons to highlight an individual SETUP option, use the ◄► buttons to
change the setting, and press the MENU to exit the menu.
▪
If the signal source is TV, the SETUP MENU
appears as:
▪
If the signal source is HDMI/VGA/Video/S-Video/
YPbPr, the SETUP MENU appears as:
OSD Language
Time Setup
Closed Caption
Parental
English
Middle
OSD Language
Time Setup
Parental
English
Middle
Gamma
Gamma
Reset Default
Reset Default
Setup
Select
Exit
Setup
Select
Exit
ꢄ
The SETUP menu includes the following options:
OSD Language
Closed Caption
Selects to display all on-screen menus in your language of choice:
English/French/Spanish
Allows to select from analog or digital closed caption modes and
press the OK button. The Closed Captain list appears:
Analog Cloaed Caption
Digital Cloaed Caption
Digital Caption Style
Off
Off
Closed Caption
Select
Exit
ꢃAnalog Closed Caption:
Press the ◄► buttons to select the basic analog closed caption
options: OFF/CC1/CC2/CC3/CC4
▪
CC1 /CC2 /CC3 /CC4:
Display a printed version of the dialog and sound effects of the
program being viewed
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
▪
▪
T1/T2:
Display station information presented using either half or the
whole screen
T3/T4:
Extended Data Services. For example: Network name, program
name, program length, etc.
ꢁDigital Closed Caption:
Press the◄►buttons to select the digital closed caption option.
Note: The setting here will be applied to each DTV channel
ꢂCaption Style:
Press OK button to customize the settings for digital closed
caption option:
Caption Style
Font Size
Custom
Large
Font Color
White
Font Opacity
Solid
Background Color
Background Opacity
Window Color
Window Opacity
Black
Solid
Black
Translucent
Closed Caption Style
Select
Exit
Parental
The Parental Control can be set up to the TV to block Channel,
Video Source and to change password.
ꢃUse the ▼ button to select the Parental, and press the OK to
display the Parental menu
ꢁUse the Program Block function, must enter a four-digit
password. The factory password is 0000
ꢂThe Parental list appears:
ꢅProgram Block
Allows to setup the TV and MPAA Rating
Lock options (refer to “Using the Program
Block Setting”).
U.S.TV Ratings
U.S. Movie Ratings
Canadian English Ratings
Canadian French Ratings
Block MPAA Unrated
Block TV Unrated
NO
NO
Parental Block
Select
Exit
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
ꢅChannel Block
Allows to block digital channels.
2
3
4
5
6
7
8
9
ABC
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
DISC
10
Channel Block
Set OK Select
Exit
ꢅInput Block
Selects to block a Input source signal
1
2
3
4
5
6
7
8
6
7
8
TV(CABLE/AIR)
VIDEO1 (AV)
VIDEO2 (S-VIDEO)
VIDEO3 (YPbPr1)
VIDEO4 (YPbPr2)
DVD
USB
CARD READER
VIDEO5 (HDMI1)
VIDEO6 (HDMI2)
COMPUTER(VGA)
Input Block
Set OK Select
Exit
ꢅChange Password Selects to change your password
Gamma
Allows adjustment of the display’s gamma correction, which
finetunes both brightness and red/green/blue ratios: On/Off/Middle/
Bright/Dark
Reset Default
Press the OK button to restore factory settings
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Using the Program Block Settings
ꢃ
ꢁ
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the SETUP.
Use the ▼ buttons to highlight Parental, and press the OK button.
OSD Language
Closed Caption
Parental
English
Middle
Gamma
Reset Default
Setup
Select
Exit
ꢂ
ꢄ
Use the Parental function, must enter a four-digit password. The factory password is
0000.
Program Block
Channel Block
Password
****
Input Block
Change Password
Parental
Select
Exit
Parental
Select
Exit
Use the ▼ button to select the Program Block, and press the OK to display the
Program Block menu.
U.S.TV Ratings
U.S. Movie Ratings
Canadian English Ratings
Canadian French Ratings
Block MPAA Unrated
Block TV Unrated
NO
NO
Program Block
Select
Exit
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
ꢇ
The Parental block menu includes the following options:
U.S. TV Ratings
Selects to activate the TV Rating programs.
Selects to activate the MPAA Rating programs
U.S. Movie Ratings
Canadian English Ratings Selects to activate the English Rating programs of Canada.
Canadian French Ratings Selects to activate the French Rating programs of Canada
Block MPAA Unrated
Block TV None Rating
▪ YES:
Block all movies that are broadcast without a MPAA rating.
▪ NO:
Allows all movies that are broadcast without a MPAA rating
▪ YES:
Block all movies that are broadcast without a TV rating.
▪ NO:
Allows all movies that are broadcast without a TV rating.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
U.S. TV Ratings
The U.S.TV Rating has 2 rating methods: Content-Based Rating and Age-Based Rating.
The U.S.TV Rating includes the following options:
A
D
L
S
V
FV
TV-Y
Note:
TV-Y7
TV-G
When a channel is blocked the user can
unblock the channel by entering the password.
Press the OK button and enter the password
to watch that channel. Once the channel is
changed and you return to it, they must re-
enter the password.
TV-PG
TV-14
TV-MA
Allowed Rating
Blocked Rating
U.S. TV Ratings
Set OK Select
Exit
AGE-BASED
RATING
TV-Y
DESCRIPTION
All children
TV-Y7
Directed to children age 7 and older
General Audience
TV-G
TV-PG
TV-14
Parental Guidance suggested
Parents strongly cautioned
Mature Audience only
TV-MA
CONTENT-BASED
RATING
DESCRIPTION
FV
D
Fantasy violence
Suggestive dialogue
Strong language
Sexual situations
Violence
L
S
V
ALL
All contents are blocked
CONTENT-BASED
L
FV
D
S
V
TV-Y
TV-Y7
TV-G
ꢇ
TV-PG
TV-14
TV-MA
ꢇ
ꢇ
ꢇ
ꢇ
ꢇ
ꢇ
ꢇ
ꢇ
ꢇ
ꢇ
ꢇ
ꢇ: To block programs by both content and age.
Use the ◄►▲▼ buttons to select the rating you want and press the OK button repeatedly to
select BLOCK or UNBLOCK
.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
Canadian English Ratings
The Canadian Englsh Ratings includes the following options:
G
C8+
G
PG
14+
18+
Allowed Rating
Blocked Rating
Canadian English Ratings
Set OK Select
Exit
RATING
DESCRIPTION
All children
G
C8+
G
Children 8 years and older
General programming
Parental guidance
PG
14+
18+
Viewers 14 and older
Adult programming
Use the ◄►▲▼ buttons to select the rating you want and press the OK button repeatedly to
select BLOCK or UNBLOCK
.
Canadian French Ratings
The Canadian French Ratings includes the following options:
G
8 ans+
13 ans+
16 ans+
18 ans+
Allowed Rating
Blocked Rating
Canadian French Ratings
Set OK Select
Exit
RATING
DESCRIPTION
G
General programming
8 ans+
13 ans+
16 ans+
18 ans+
Not recommended for ages under 8
Not recommended for ages under 13
Not recommended for ages under 16
Programming restricted to adults.
Use the ◄►▲▼ buttons to select the rating you want and press the OK button repeatedly to
select BLOCK or UNBLOCK
.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the LCD TV
U.S. Movie Ratings
The U.S. Movie Ratings is used for original movies rated by the Motion Picture Association of
America(MPAA) as broadcasted on cable TV and not edited for television.
The U.S. Movie Ratings includes the following options:
G
PG
PG-13
R
NC-17
X
Allowed Rating
Blocked Rating
Canadian English Ratings
Select
Exit
RATING
DESCRIPTION
G
General Audiences. Movie is appropriate for all ages
PG
Parental Guidance Suggested. May contain material not suited for younger
viewers
PG-13
R
Contains content that may not be appropriate for viewers under the age of
13
Restricted. Contains adult content, no one under 17 admitted without
parent
NC-17
X
No one 17 and under admitted
No one 17 and under admitted
Use the ◄►▲▼ buttons to select the rating you want and press the OK button repeatedly to
select BLOCK or UNBLOCK
.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
SPECIFICATIONS
MODEL
TDX-02610B
LCD Panel
Panel Size
26” TFT LCD
Brightness
500 cm2
Contrast Ratio
800:1
Max. Resolution
1366x768
Input Connector VIDEO/AUDIO(L/R)
S-VIDEO/AUDIO(L/R)
YPbPr/AUDIO(L/R)
VGA/AUDIO(L/R)
HDMI/AUDIO(L/R)
AUDIO OUT(L/R)
COAXIAL
2
1
2
1
2
1
1
HEADPHONE
1
Built-in DVD
1
USB Connector
SD Card Reader
Power Source
1
1
AC110~220V, 50/60HZ, 2.2A
180 W, standby < 1 W
27.30 w x 21.78 h x 3.86 d inches
34.94 LB
Power Consumption
Dimension
WEIGHT
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Your Remote Control
PROGRAMMING YOUR REMOTE CONTROL
Your remote lets you control four devices with one easy-to-use, compact unit. After installing
batteries, you can program the remote to control your Universal TV, VCR or DVD, Cable or Satellite
Receivers, Amplifier or Tuner, and Auxiliary devices. To do so, follow the instructions in
“Programming a Device”. For best results, please read and follow all the remaining instructions.
Keep this guide for future reference.
A Quick Look at Programming a Device
To control VCR or DVD, Cable or Satellite Receivers, Amplifier or Tuner, and Auxiliary devices,
follow these steps. Before proceeding, find the codes for the devices you want to program in
“Manufacturer’s Codes” on the right side of this page and write them down or highlight them.
To program a DVD Player, TV/DVD Combo, TV/VCR/DVD Combo, portable DVD
player, or mobile DVD player, use the DVD key.
ꢃ
Turn on the device (for example, DVD player) and, if needed, load media (for
example, a DVD).
ꢁ
ꢂ
ꢄ
Press a device key (VCR/DVD, CBL/ SAT, or AUX).
Press and hold SET UP until the red LED blinks twice; then release.
Enter the first 4-digit code for your device. The LED blinks once as each digit is
entered. If the code is correct, the LED blinks twice.
If the LED does not blink twice, repeat steps 2 to 4 and try entering the
code again.
ꢇ
ꢈ
Aim the remote at the device and press . The device should turn off. If it does not,
repeat steps 3–5, trying each code for your brand until you find one that works. If
you cannot find a code that works, see “Searching for Your Code”.
Repeat steps 1–5 for the other devices you want to control. For future reference,
write down each working device code below:
AUX Code:
CBL Code:
CD Code:
DVD Code:
SAT Code:
TNR Code:
VCR Code:
ꢆ
Press set to save and exit.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Your Remote Control
Searching for your Code
If your device does not respond to the remote after trying all codes listed for your brand, or if
your brand is not listed, try searching for your code:
ꢃ
ꢁ
ꢂ
Press a device key once.
Press and hold SET UP until the red LED blinks twice; then release.
Enter 9-9-1, then the device group number (0= Cable, 1= TV, 2= VCR, 3= Audio).
The LED blinks twice.
ꢄ
Aim the remote at the device and press . The remote sends IR codes from its
library to the selected device, starting with the most popular code first. If the device
responds, go to step 7.
ꢇ
If the device does not respond, press CH▲. The remote will try the next code.
Continue until the device responds. Press CH▼ to try the previous code.
ꢈ
ꢆ
To search for other device codes, repeat steps 1 to 5.
Press SET UP to save and exit.
Checking the Codes
If you have set up the remote using the procedure in “Searching for Your Code”, you may need to find
out which four-digit code is operating your equipment.
For example, to fi nd out which code is assigned to your TV:
ꢃ
ꢁ
ꢂ
ꢄ
Press TV once.
Press and hold SET UP until the red LED blinks twice; then release.
Enter 9-9-0. The LED blinks twice.
To view the code for the first digit, press 1. Count the LED blinks (for example, three
blinks = 3), and write down the number in the appropriate code listing in step 8
under “Programming a Device”.
If a code digit is 0, the LED does not blink.
ꢇ
Repeat step 4 for the four remaining digits, using 2 for the second digit, 3 for the
third digit, and 4 for the fourth digit.
Changing Volume Lock
The remote comes preset to allow independent volume control of each selected device (Global Volume
Unlock). However, you may change the Volume Lock setting to Global Volume Lock so that one
device’s volume will control volume in all other modes. After that, you can perform Individual Volume
Unlock on a selected device to set its volume control for independent operation or Global Volume
Unlock to remove all volume locking.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Your Remote Control
Changing Volume Lock
The remote comes preset to allow independent volume control of each selected device (Global
Volume Unlock). However, you may change the Volume Lock setting to Global Volume Lock so that
one device’s volume will control volume in all other modes. After that, you can perform Individual
Volume Unlock on a selected device to set its volume control for independent operation or Global
Volume Unlock to remove all volume locking.
Locking Volume Control to One Mode (Global Volume Lock)
ꢃ
ꢁ
Press and hold SET UP until the red LED blinks twice; then release.
Enter 9-9-3 and then press the mode key for the device you want to control volume (for
example,TV). The LED blinks twice. Now when you press VOL+, VOL-, or Mute, the selected
device (for example, TV) will control the volume regardless of the current mode.
Unlocking All Volume Control (Restoring Global Unlock)
ꢃ
ꢁ
Press and hold SET UP until the red LED blinks twice; then release.
Enter 9-9-3 and then press VOL+. The LED blinks four times.
Volume is now independently controlled for all programmed devices.
Unlocking a Single Device’s Volume Control
ꢃ
ꢁ
ꢂ
Press a device key (TV, VCR/DVD, CBL/ SAT, or AUX).
Press and hold SET UP until the red LED blinks twice; then release.
Enter 9-9-3 and then press VOL-. The LED blinks four times. Volume is now
independently controlled for the selected devices.
Troubleshooting
PROBLEM
SOLUTION
LED does not blink when you press a key.
ꢅ Replace battery with new AAA size battery.
LED blinks when you press a key, but
device does not respond.
ꢅ Make sure the remote is aimed at your device and is not more
than 15 feet away
LED blinks one long blink.
ꢅ An entry error has occurred (for example, wrong key). Try entry
sequence again.
Remote does not control devices or
commands are not working properly.
ꢅ Try all listed codes for the device. Make sure the device operates with
an infrared remote control.
CH▲, CH▼, and LAST do not work for your ꢅ Due to RCA design from 1983 to 1987, only the original remote
RCA TV.
control will operate these functions.
No volume on a device.
Channels do not change properly.
ꢅ See “Changing Volume Lock”.
ꢅIf the original remote control required you to press Enter to
change channels, press Enter on this remote after entering the
channel number.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Your Remote Control
Manufacturer’s setup codessetup codes
Audio Amplifiers
Manufacturer
Code
Manufacturer
Code
Modulaire
NEC
0395
0264
Adcom
Aiwa
0577, 1100
0406
Naim
0269
Arcam
0269
Nakamichi
Optimus
Panasonic
Pass Labs
Philips
Pionee
Polk Audio
RCA
0321
Bose
Carver
0674
0892, 0269
0160
0300
0160
1561
0647
0078
0269
0013, 0300, 0823, 0395
0308, 0521
0269
0892, 0269
0013, 0300, 0823
0892, 0269
0013, 0300, 0823
0395
Cinema Sound
Curtis Mathes
Denon
Durabrand
Elan
GE
RadioShack
Realistic
Revox
Grundig
Harman/Kardon
JVC
0013, 0395, 0220
0269
0892
331
Sansui
Shure
0321
0264
Left Coast
Lenoxx
0892
1561
Sony
0815, 0220, 0689
0078
0308, 0521
0331
0013, 0078
0354, 0133
Linn
0269
0165
0269
0892, 0269, 0321
0251
Soundesign
Technics
Victor
Wards
Yamaha
Luxman
Magnavox
Marantz
McIntosh
Micromega
0269
Cable Converters
Manufacturer
Code
Manufacturer
Code
Nova Vision
Novaplex
Pace
Panasonic
Paragon
Penneys
Philips
0008
0008
A-Mark
ABC
Accuphase
Acorn
Action
Active
Americast
Archer
0008, 0144
0237, 0003, 0008
0003
0237
0237
0237
0899
0237
0877, 1877, 0237, 0008
0000, 0008, 0144, 0107
0000, 0008, 0525
0000
1305, 0317
0877, 1877, 0144, 0533
Pioneer
Pulsar
0000
BCC
0276
Quasar
Regal
Runco
Samsung
Scientifi c Atlanta
0000
0276, 0279
0000
0003, 0144
0877, 1877,0477,
0237, 0003, 0000, 0008
1006
Bell South
British Telecom
Century
Digeo
Director
Fosgate
GE
0899
0003
0008
1187
0476
0276
0144
Son
Sprucer
Starcom
Supercable
Time Warner cable
Torx
0144
0003
0276
1877
0003
0000
General Instrument
Gibraltar
GoldStar
Hamlin
Hitachi
Insight
0476, 0810, 0276, 0003
0003
0144
0009
0003, 0008, 0009
0476, 0810
Toshiba
US Electronics
United Cable
Videoway
Zenith
0276, 0003, 0008
0276, 0003
0000
Jerrold
0476, 0810, 0276, 0003
0000
0003
Memorex
Mitsubishi
Motorola
0000, 0008, 0525, 0899
0476, 1376, 0810, 0276, 1187
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Your Remote Control
Audio Amp/Tuners
Manufacturer
Code
0531
1077
1563, 1615
1243, 1405,1388, 1641,
0189, 0121, 0405, 0158
1255, 1512, 0244, 0346
1390
Manufacturer
Kenwood
Code
1313, 1570,1569, 0186,
ADC
AMC
AMW
Aiwa
0042, 0239, 0027, 0077
1497, 1366, 0424
1293
0181
1798
1437
1076
0189
1497
0195
0195
0039, 0346
1189, 1269, 0531,1266,
0189, 1514, 0195,
0391,1120
Koss
LG
LXI
Akai
Alco
Lasonic
Lenoxx
Lexicon
Linn
Liquid Video
Lloyd’s
Lloyds
MCS
Amphion Media Works 1563, 1615
Anam
Apex
Apex Digital
Arcam
Audiotronic
Audiovox
B & K
1609, 1074
1257
1774, 1257, 1430
1189, 1120
1189
1390, 1627
0820, 0840, 0701, 0702
0702
Magnavox
BK
Bose
Brix
Cairn
1229, 0639, 1253
1602
0189
Marantz
1189, 1269, 0891, 0189,
1289, 1120, 0039
289
1189, 0189
1393
McIntosh
Micromega
Mitsubishi
Modulaire
Myryad
Cambridge Soundworks 1370
Capetronic
Carver
0531, 0195
1189, 0189, 0121, 1289,
0042, 0360, 0008
0195
1189
Casio
0195
NAD
0320
Clarinette
Classic
Coby
0195
1352
1389
Nakamichi
New Castle
Nikko
1313, 0097, 1555, 0347
0502
0322
Compaq
Criterion
Curtis Mathes
Daewoo
Dell
1136
1420
0014, 0080, 0039
1250
1383
Nikkodo
Norcent
Nova
0322
1389
1389
Onkyo
0842, 0135, 1320, 1298,
1531
Delphi
Denon
1414
Optimus
1023, 0531, 0014,1074,
0670, 0121, 0186, 0080,
0195, 0738, 0801, 0042,
0181, 0502, 0219, 0158,
0074, 0163, 0177
1497, 1366
1142, 1360, 1306, 0121,
0004
Emerson
Fisher
0531, 0195, 0424
1801, 0801, 0042, 0360,
0219, 0008
0463, 0424
1517, 1567
1352, 1532
0189
0110, 1304, 1306, 0891,
0189, 1289
1181
1273, 1801
1426
0491
0842, 0135, 1320, 1298
0110, 1306
1058, 1374, 1495, 1811,
0074
1428, 1390, 1412
1390
Oritron
Outlaw Audio
Panasonic
Garrard
Gateway
Go Video
Grundig
Harman/Kardon
0391
1308, 1518, 1548,1288,
1316, 1763, 1764, 1633,
0309, 0367, 0039
0195
Penney
Penneys
Philips
0195, 0039
Hewlett Packard
Hitachi
Initial
Inkel
Integra
JBL
1189, 1269, 0891,1266,
0189, 0391, 1120
1023, 1384, 0531, 0014,
0150, 0630, 0080, 0801,
0244, 0346
1508
0189, 1289, 1414
1254, 0054
Pioneer
Polaroid
Polk Audio
Proscan
Quasar
RCA
JVC
KLH
Kawasaki
0039
1023, 1609, 1254, 0531,
1511, 1390, 1074, 0080,
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Your Remote Control
Audio Amp/Tuners
Manufacturer
Code
1609, 0181
1609, 0121, 0186, 0195,
0042, 0181, 0158, 0163,
0177
1437
0189
1869, 1383
1383
1519
Manufacturer
Sony
Code
RadioShack
Realistic
1058, 1441, 1258, 1759,
1758, 1622, 1858, 1658,
1558, 1406, 0405, 0474,
1349, 1442, 0158
0670
Regent
Revox
Rio
Rio Audio
Saba
Soundesign
Stereophonics
Sunfire
1023
1313
Teac
1267, 1390,1074, 1528,
0463, 0163
Samsung
Sansui
Sanyo
1295, 1500
1189, 0189, 0346
1801, 1469, 1251, 0801,
0360, 0219
0322, 0163
0195, 0424
0186, 1286
1556
Technics
1308, 1518,1633, 0309,
0039
1189
0842, 0135, 0080
1390
0074
Thorens
Toshiba
Venturer
Victor
Waitec
Wards
Scott
Sears
Sharp
Sharper Image
Sherwood
1352
0014, 0189,0080, 0042,
0054, 0158
1406, 1414
1077, 1653, 0491, 0502,
1423
XM
Shinsonic
Siemens
Sirius
1426
0424
1811, 1602, 1627
1869, 1532, 1383
Yamaha
1023, 0176,1176, 1375,
1331, 1276, 0186
0195
Yorx
Sonic Blue
Zenith
1293, 0857, 0346
Miscellaneous Audio
Manufacturer
Altec Lansing
Cambridge Soundworks 1530
Creative
D-Link
Imerge
Integra
Jerrold
Code
Manufacturer
Code
1485
Marantz
Motorola
Netgear
Omnifi
Onkyo
SSI
1491
1464
1785
1605
1789
1522
1809, 1810
0872
1522
1491
1789
0520
Yamaha
Satellite Receivers
Manufacturer
Code
Manufacturer
Code
AlphaStar
Bell ExpressVu
Chaparral
DirecTV
0772
0775
0216
GE
GOI
0566, 0392
0775, 1775
General Instrument
Goodmans
HTS
Hitachi
Houston tracker
Hughes
0869
0566, 0639, 1639, 1640,
0247, 0749, 1749, 1142,
1442, 0724, 0819, 1856,
1108,1609, 0392, 1392,
1076, 0099
1246
0775, 1775
1250, 0749, 0819
0775
0749, 1749, 1142, 1442
Dish Network
Dish Network System
Dishpro
Echostar
Expressvu
0775
Hughes Network Systems
Innova
JVC
Jerrold
LG
0749,1749, 1142, 1442
0099
0775, 1775
0869
1226
0775, 1775, 1005, 1505
0775, 1775, 1005, 1505
0775, 1775, 1005, 1505
0775, 1775
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Your Remote Control
Manufacturer
Code
0724, 0722
0869
0724
0749
0869, 0856
1270
Manufacturer
RCA
Code
0566, 1142, 1442, 0775,
0143, 0855, 0392, 1392
0566, 0775, 0869
0856, 0099
Magnavox
McIntosh
Memorex
Mitsubishi
Motorola
NEC
RadioShack
SKY
Samsung
1142, 1442, 1276, 1108,
1609
Netsat
0099
Sanyo
1219
Next Level
Optimus
Panasonic
Paysat
0869
0724
0701, 0247
0724
0749, 1749, 1142, 1442,
0775, 0724, 0722, 0819,
1076, 0099
1142, 1442
0869
Sony
0639, 1639, 1640
0869
0772, 0869
0566, 0392
1142, 1442
0749, 1749, 0790, 1285,
0819
1640, 1392
0724, 0722
0869
Star Choice
Star Trak
Thomson
Tivo
Philips
Toshiba
Pioneer
Primestar
Proscan
UltimateTV
Uniden
Voom
0566, 0392
Zenith
0856, 1856
TVs
Manufacturer
Code
Manufacturer
Code
A-Mark
AOC
Accuscan
Action
0047, 0054
0180, 0030
0047
0030
0463, 0180, 0047,0054,
0017, 0051, 0093
0761, 0783, 0815,0817,
Bell & Howell
Bell and Howell
BenQ
Bradford
Brockwood
Broksonic
CXC
0054, 0154, 0093
0054, 0154, 0093
1756, 1032
0180
0030, 0178
0236, 0463, 0180
0180
Admiral
Advent
0842
Candle
0030
Adventuri
Agna
Aiko
0000
0150
0092
Capehart
Capetronic
Carnivale
Carver
0017, 0030, 0178, 0092
0030
0030
Akai
0060, 0702,0672, 0030,
0054
0145, 0812
0700, 0843
Celebrity
Celera
0000
0765
Albatron
Alfi de
Alleron
Ambassador
America Action
American High
Amstrad
0672
0030
0150
0180
0000, 0060
0171
Changhong
Cineral
Citek
0156,0765, 0783, 0767
0451, 0092
0047
0054, 0000, 0451, 0463,
0180,0060, 0030, 0092,
0171
Citizen
Amtron
0000, 0180
Clarion
0180
Anam
Apex
Apex Digital
0180
0156, 0748, 0765
0156, 0748, 0765,0879,
0767
Classic
Colortyme
0030, 0092
0047, 0054, 0017, 0060,
0030, 0178
0047, 1447
0178
Commercial Solutions
Conic
Contec
Craig
Crosley
Audinac
Audiovox
Aumark
Aventura
Baysonic
Beaumark
Belcor
0180
0451, 0180, 0092, 0623
0060
0171
0180
0017, 0030, 0178
0030
0180
0180, 0171
0054, 0000, 0180, 0030,
0171
0093, 0180, 0672
0672
Crown
Crown Mustang
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Your Remote Control
Manufacturer
Code
Manufacturer
Curtis Mathes
Code
0047, 0054, 0154, 0000,
0051, 0451, 0093, 0180,
0060, 0702, 0030, 0178,
0145, 0166, 1147, 1347
0451, 1661, 0672, 0178,
0092, 0623, 1755,1756,
0661
American High
Amstrad
Amtron
Anam
Apex
0000, 0060
0171
0000, 0180
0180
0156, 0748, 0765
0156, 0748, 0765, 0879,
0767
Daewoo
Apex Digital
Dayton
Daytron
Dell
0092
0030, 0178, 0092
1454
Audinac
Audiovox
Aumark
0180
0451, 0180, 0092, 0623
0060
Denon
Dumont
Durabrand
0511, 0145
Aventura
Baysonic
Beaumark
Belcor
0171
0180
0017, 0030, 0178
0030
0017, 0180, 0178
0463, 0180, 0178, 0171,
1034, 1463
Dwin
ESA
Eaton
Electroband
Electrograph
Electrohome
0093
0171, 0812
0060
0000
Bell & Howell
Bell and Howell
BenQ
Bradford
Brockwood
Broksonic
CXC
0054, 0154, 0093
0054, 0154, 0093
1756, 1032
0180
0030, 0178
0236, 0463, 0180
0180
1755
0154, 0000, 0150,0030,
0178
Emerald
Emerson
0178
Candle
0030
0047, 0154, 0451, 0236,
0463, 0180, 0150, 0178,
0171, 0623
0030
0054, 0154, 0000
0093
0000, 0180, 0171
0180
0047, 0000, 0051,0451,
0060, 0030, 0178, 1147,
1347, 1447
1755, 1756
0047
0017, 0000, 0030
0017, 0030Go
0047, 0054
Capehart
Capetronic
Carnivale
Carver
Celebrity
Celera
Changhong
Cineral
Citek
0017, 0030, 0178, 0092
0030
0030
0054
0000
Envision
Fisher
Fortress
Funai
Futuretech
GE
0765
0156, 0765, 0783, 0767
0451, 0092
0047
0054, 0000, 0451, 0463,
0180,0060, 0030, 0092,
0171
Citizen
Gateway
Gemini
Gibraltar
Gibralter
A-Mark
AOC
Clarion
Classic
Colortyme
0180
0030, 0092
0047, 0054, 0017, 0060,
0030, 0178
0180, 0030
Commercial Solutions
0047, 1447
Accuscan
Action
Admiral
0047
0030
Conic
Contec
Craig
0178
0180
0463, 0180, 0047, 0054,
0017, 0051, 0093
0761, 0783, 0815, 0817,
0842
0000
0150
0180, 0171
0054, 0000, 0180, 0030,
0171
0093, 0180, 0672
0672
0047, 0054, 0154, 0000,
0051, 0451, 0093, 0180,
0060,0702, 0030, 0178,
0145, 0166, 1147, 1347
0451, 1661, 0672, 0178,
0092, 0623, 1755, 1756,
0661
Crosley
Advent
Crown
Crown Mustang
Curtis Mathes
Adventuri
Agna
Aiko
0092
Akai
0060, 0702, 0672, 0030,
0145, 0812
0700, 0843
0672
0030
Albatron
Alfi de
Alleron
Daewoo
Ambassador
America Action
0150
0180
Dayton
Daytron
0092
0030, 0178, 0092
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Your Remote Control
Manufacturer
Code
0700, 0843
Manufacturer
Code
1454
Dell
Monivision
Motorola
Multitech
NAD
Denon
Dumont
Durabrand
0511, 0145
0054, 0051, 0093, 0150
0180
0156, 0178, 0166, 1156,
0866
0017, 0180, 0178
0463, 0180, 0178, 0171,
1034, 1463
Dwin
ESA
0093
0171, 0812
NEC
NTC
0047, 0030, 0178, 1704
0092
Eaton
0060
0000
1755
NetTV
Nikko
1755
Electroband
Electrograph
Electrohome
0047, 0017, 0154, 0156,
0030, 0178, 0092, 1347
0030, 0178, 0092
0030
0154, 0000, 0150, 0030,
0178
Nikkodo
Nishi
Emerald
Emerson
0178
Norcent
Nyon
Onwa
0748
0000
0180
0047, 0154, 0451,0236,
0463, 0180, 0150, 0178,
0171, 0623
0030
0054, 0154, 0000
0093
0000, 0180, 0171
0180
0047, 0000, 0051, 0451,
0060, 0030, 0178,
1147,1347, 1447
1755, 1756
Optimus
0154, 0250, 0093,0180,
0150, 0030, 0178, 0166,
0650, 0679
Envision
Fisher
Fortress
Funai
Futuretech
GE
Optonica
Orion
0093
0017, 0236, 0463, 0180,
0178, 1463
0156, 0060
PCE
Pace
Panasonic
0092
0047, 0054, 0154, 0000,
0156, 0051, 0250, 0093,
0236, 0150, 0060, 0053,
0030, 0178, 0145,1347,
0650
Gateway
Gemini
Gibraltar
Gibralter
Video
0047
0017, 0000, 0030
0017, 0030Go
0060
Panda
0706
GoldStar
Goodmans
Gradiente
Logik
MGA
MGN Technology
MTC
0047, 0054, 0030, 0178
0360
0053
0236, 0180
0150, 0030, 0178
0178
0180, 0060, 0030, 0092
0054,0000, 0156, 0093,
0030, 0092
0047, 1454, 0054,0154,
0000, 0051, 0250, 0180,
0060, 0030, 0092, 0171,
0706, 1254, 1755
0017
1454, 0054, 0030
0051, 0250, 0650
1755, 1756
1755
0700
0047, 0178, 0145
0154, 0463,0180, 0150,
0060, 0030, 0178
0150
0047, 0017, 0051
0154, 0093, 0150, 1250,
0030, 0178, 0836
Paxonic
Penney
0060, 0030
0047, 0156, 0051, 0060,
0030, 0178, 1347
0047, 0000, 0156, 0051,
0250, 0060, 0030, 0178
1523
0054, 0463, 0030, 0145
1454, 0054, 0017, 0000,
0030, 0171, 1254, 0690
0051, 0060, 0030, 0178
0166, 0866, 0679
0765, 0865, 1523
0451, 0092
0236, 0180
0761, 0783, 0815, 0817
0700
0051, 0250
0047, 0030, 1347, 1447
0178
Penneys
Petters
Philco
Philips
Magnasonic
Magnavox
Pilot
Pioneer
Polaroid
Portland
Precision
Prima
Princeton
Prism
Proscan
Proton
Pulsar
Majestic
Marantz
Matsushita
Maxcent
Maxent
Megapower
Megatron
Memorex
0017, 0092
0178, 0092
0150, 0178
0051, 0250, 0650
Pulser
Quartz
Quasar
Micro Genius
Midland
Mitsubishi
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Your Remote Control
Manufacturer
RCA
Code
0090, 1547, 0047, 0054,
0000, 0051, 0093, 0178,
1047, 1147, 1247, 1347,
1447, 0679
Manufacturer
Code
TMK
TNCi
TVS
Tandy
Tatung
Teac
0236, 0180, 0178
0017
0463
0093
Rabbit
RadioShack
0047
0000, 0051, 1756
0154, 0706
0047, 0054, 0017, 0051,
0250,1347, 0650
0030
0051, 0250, 0060
0054, 0463, 0180, 0150,
0060, 0178, 0092
0017
0047, 0154, 0180, 0150,
0030, 0178
0047, 0154, 0180, 0150,
0030, 0178
0017, 0060, 0030
0154, 0171
0180
0054
0748, 0865
0047, 0030, 1755, 1756
0047, 0054, 0017, 0154,
0060, 0702, 0030, 0178,
1060, 0812
Technics
Realistic
Technovox
Techwood
Teknika
Runco
SR2000
SSS
SV2000
SVA
Telecolor
Telefunken
Thomas
Thomson
Tocom
0702
Sampo
Samsung
0047, 0178
0047, 1447
0156
0154, 0156, 0150,1265,
0060, 0145, 0166, 1145,
1156, 1256, 1356, 1656,
1704, 0650
0051
0178
0051, 0250
0092
0047
1755, 1756
0030
Toshiba
Sanky
Sansui
Sanyo
0060, 0030
0463, 0060, 0030
0088, 0047, 0054, 0154,
0000, 0463, 0171, 1755
0060
Totevision
Toyomenka
Truetone
Ultra
Universal
V
Vector Research
Victor
Vidikron
Vidtech
Viewsonic
Viking
Saville
Scotch
Scott
0178
0236, 0180, 0030, 0178
0047, 0054, 0017, 0154,
0000, 0156, 0051, 0093,
0060, 0053, 0030, 0178,
0171, 0166
0054, 0093, 0180
0093
0178
0145
0054
0047,0093,0030
0030, 0178
0060, 0092
Sears
1100, 0053
0054
0178
1755
0060
Sharp
Sheng Chia
Shivaki
Siemens
Signature
Signature 2000
Simpson
Singer
Visio
Vizio
Wards
1755, 1756
1756
0047,0054,0017, 0154,
0000, 0156, 0051, 0093,
0236,0180, 0060, 0030,
0178, 0166, 1147, 1347,
1156, 0866
0156
Solar Drape
Sony
0000
1100, 0017, 0154, 0000,
0150, 0053
0180, 178
0156, 0178
0171
0236, 0180
0843
0000
Soundesign
Spectravision
Squareview
Starlite
Studio Experience
Supreme
Waycon
Welton
Westinghouse
White Westinghouse
World
XR1000
Yamaha
Yorx
0178
0451
0451, 0236, 0463, 0623
0451, 0236, 0463, 0180
0154, 0180, 0171
0030
Sylvania
0047, 0054, 0154,0000,
0051, 0030, 0178, 0092,
0171
0030
Zenith
0047, 0017, 0000, 0093,
0463, 0030, 0178, 0145,
0092, 0171, 1145, 0812
Symphonic
0000, 0180, 0178, 0171
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Your Remote Control
VCRs
Manufacturer
Code
0184, 0121
Manufacturer
Code
0000, 0037, 0240
A-Mark
ABS
Admiral
Emerald
Emerex
Emerson
1972
0032
0209, 0060, 0048, 0039,
0047, 0104
0000, 0037, 0240
0072
0124, 0000, 0037
0175, 0041
0209, 0072
1972
1479, 1278, 0000, 0037,
0184, 0240, 0121, 0043,
0209
0000, 0039, 0047, 0104
0035, 0033
0000
0000, 0037, 0072
1035, 1060, 0807, 0000,
0035, 0060, 0048, 0240
0000
Adventura
Adyson
Aiwa
Akai
Alba
Alienware
Allegro
American High
Amstrad
Asha
Fisher
Fuji
Fujitsu
Funai
GE
0039
0035, 0081
0000
Garrard
Gateway
Gemini
1972
0060
0240
Astra
Audiovox
Avis
Beaumark
Bell & Howell
0035, 0240
0037
0000, 0072
0240
0000, 0035, 0048, 0039,
0104
Genexxa
Go Video
GoldStar
0000, 0037
0614, 0240
1237, 0000, 0035, 0037,
0039
0081, 0042
0081
Granada
Grundig
Bell and Howell
0000, 0035, 0048, 0039,
0104
HI-Q
HP
0000, 0035, 0047
1972
Broksonic
CCE
Calix
1479, 0184, 0121, 0209
0072
0037
Harley Davidson
Harman/Kardon
Harvard
0000
0081
0072
Candle
Canon
Carrera
Carver
Citizen
0037
0035
0240
Harwood
Hewlett Packard
Hitachi
0072
1972
0089, 0000, 0035, 0037,
0045, 0042, 0041
1972
0739, 0042
0739
0035, 0081
1278, 0000, 0035, 0037,
0240, 0209
0037
0035, 0060, 0045
0000, 0072
0037, 0047, 0240, 0072
0000, 0072
0000, 0035, 0081
0072
1035, 0000, 0035, 0060,
0162, 0240, 0041
1972
0240
1278, 0037, 0045
0037
Howard Computers
Hughes Network Systems
Humax
Hush
Hytek
TT Nokia
JVC
Janeil
Jensen
KEC
KLH
KTV
Classic
Colortyme
Colt
1972
0000, 0047, 0072I
0240, 0041
0067, 0041
0240
0067, 0041
0037
Craig
Criterion
Crosley
Crown
Curtis Mathes
0072
0000
CyberPower
Cybernex
Daewoo
Daytron
Dell
Kenwood
Kodak
LG
0067, 0041
0035, 0037
0037, 0240
0000, 0037, 0042, 0067
1972
0000
0000, 0240, 0072
0081
1972
0081, 0042
0041
0739
003, 0000
LXI
Denon
Linksys
Lloyd’s
Lloyds
Derwant
DirecTV
Dual
Loewe
Dynatech
Electrohome
0000, 0240
0000, 0060, 0037, 0240,
0043, 0209
0037
Logik
M Electronic
MEI
0000, 0240, 0072
0240
0035
Electrophonic
MGA
0060, 0240, 0043
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Your Remote Control
Manufacturer
Code
Manufacturer
Code
0240
0000, 0240, 0072
0000, 0240, 0072
0000
1278, 0000, 0037, 0240,
0072
0081, 0042
0081
0000, 0035, 0047
1972
0000
0081
0072
Metz
0037
1972
0240
1972
MGN Technology
MTC
MTC
MTX
Magnasonic
Microsoft
Midland
Mind
Minolta
Mitsubishi
0042
0807, 0000, 0060, 0048,
0047, 0042, 0067, 0043,
0041
0035, 0048
0072
0000, 0039, 0072
0240, 0104
0035, 0037, 0039, 0033,
0042
0067, 0104, 0041
0072
0037
0037
0240
1972
0240
1972
0035, 0162, 0104
0222
0000, 0035, 0037,1062,
0048, 0047, 0162, 0240,
1479, 0000, 0184, 0240,
0104, 0121, 0209
0035
0225, 1035, 0000, 0614,
0616, 0035, 1062, 0162
1237, 1035, 0035, 0037,
0042, 0240
Granada
Grundig
HI-Q
HP
Harley Davidson
Harman/Kardon
Harvard
Harwood
Hewlett Packard
Hitachi
Motorola
Movie Walker
Multitech
NAD
NAP
0072
1972
NEC
Newtech
Nikko
Nikkodo
Nishi
Niveus Media
Noblex
Northgate
Olympus
Onkyo
0089, 0000, 0035, 0037,
0045, 0042, 0041
1972
0739, 0042
0739
1972
0000, 0047, 0072
0037
Howard Computers
Hughes Network Systems
Humax
Hush
Hytek
IKEC
KLH
KTV
Kenwood
Kodak
LG
LXI
Linksys
Lloyd’s
Lloyds
Loewe
Logik
M Electronic
MEI
MGA
MGN Technology
MTC
0072
0000
Optimus
0067, 0041
0035, 0037
0037, 0240
0000, 0037, 0042, 0067
1972
0000
0000, 0240, 0072
0081
0000, 0240, 0072
0240
0035
0060, 0240, 0043
0240
0000, 0240, 0072
0000, 0240, 0072
0000
1278, 0000, 0037, 0240,
0072
1781, 0000, 0618, 0035,
0037, 0048, 0039, 081,
0240
0035, 008,0240
0037
0037, 0209
0035, 0081, 0162
1972
Orion
Panama
Panasonic
Penney
Penneys
0000, 0035, 0037, 0047,
0081, 0162, 0042, 0067,
0240
Pentax
Philco
Philips
0042
0000, 0035, 0081, 0209
0000, 0616, 0618, 0739,
0035, 0048, 0081, 0162,
0045, 0209
MTC
MTX
Magnasonic
Pilot
0037
Pioneer
Polk Audio
Profi tronic
Proscan
Protec
Protech
Pulsar
Pulser
0081, 0162, 0042, 0067
0081
0240
1060, 0060
0000, 0072
0072
0039, 0240
0240
0035, 0047
1035, 0035, 0162
1035, 1060, 0807, 0000,
0880, 0035, 0060, 0048,
0045, 0042, 0240
Magnavox
Magnin
Marant1 Marta
Matsui
Matsushita
Media Center PC
Memorex
Quartz
Quasar
RCA
1237, 0000, 0035, 0037,
0048, 0039, 0047, 0162,
0240, 0104, 0209, 0072
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Your Remote Control
Manufacturer
Code
0000, 0240
Manufacturer
RadioShack
Code
0000, 0035, 0037, 0048,
0047, 0162, 0240, 0104
0037
Symphonic
Systemax
TMK
TNIX
Tagar Systems
Tandy
1972
0000, 0240
0037
Radix
Randex
Realistic
0037
0000, 0035, 0037, 0048,
0047, 0162, 0240, 0104,
0121
0614, 0616
1972
0039
0042
0000, 0072
0000
0240, 0041
0067, 0041
0240
0067, 0041
0000,1014, 0739, 0060,
0045, 0240
0240
1972
0000, 0104
0000, 0048, 0081, 0067,
0041
0000, 0067, 0041
0000, 0035, 0060, 0037,
0039, 0162
0000, 0035, 0037
0240
Tatung
ReplayTV
Ricavision
Runco
STS
SV2000
SVA
TT Nokia
JVC
Janeil
Jensen
Samsung
Teac
Technics
Teknika
Telecorder
Telefunken
Thomas
Thomson
Tivo
0041
0000
0060, 0041
0618, 0636, 0739, 1503
0240
0845, 1145, 0000,1503,
1008, 1972, 0045, 0240,
0043, 0209, 0041
0037, 0240
1972
Tocom
Toshiba
Samtron
Sanky
Sansui
0048, 0039
1479, 0000,0067, 0240,
0209, 0041, 0072
0159, 0000, 0047, 0240,
0104
Totevision
Touch
Trix
Sanyo
0037
0045
Ultra
Scott
Sears
0184, 0045, 0121, 0043
1237, 0000, 0035, 0060,
0037, 0048, 0039, 0047,
0033, 0162, 0045, 0042,
0067, 0104, 0043, 0209,
0041, 0072
0807, 0000,0048, 0047,
0032
0000,0039, 0240, 0072
0240
Unitech
Vector
Vector Research
Vextra
Victor
Video Concepts
Videomagic
Videosonic
Viewsonic
Villain
0240
0045
0184
0072
0067, 0041
0045
0037
0000, 0240, 0072
1972
0000
Sharp
Shintom
Shogun
Siemens
0037, 0104
Voodoo
1972
Signature
Signature 2000
0035
0000, 0035,
Wards
0000, 0035, 0060, 0037,
0048, 0039, 0047, 0081,
0033, 0045, 0042, 0240,
0043, 0041, 0072
000, 0209, 0072
0209
0000, 0035, 0072
0000, 0035, 0240, 0072
0041
0060, 0037, 0048
0037, 0240, 0072
0614, 0616
1232, 0000, 0636,1972,
0035, 0047, 0032, 0033,
0067
Singer
Sonic Blue
Sony
White Westinghouse
World
XR-1000
XR1000
Yamaha
ZT Group
Zenith
Soundmaster
Stack 9
Sylvania
0000
1972
1972
1781, 0000, 0035, 0081,
0043
1479, 0000, 0037, 0039,
0033, 0209, 0041
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Your Remote Control
DVD Players
Manufacturer
Code
Manufacturer
Code
0503, 0539
1016
0641
Firstline
Fisher
Funai
GE
GPX
0651
0670
0675, 1268, 1334
0522, 0717, 0815
0699
3D LAB
Advent
Aiwa
Akai
Alba
0899, 0770, 0705
0672, 0717
Gateway
General Electric
Go Video
1158, 1073
0717
Alco
Allegro
Apex
0790
0869
0573,1075, 1044,0744,
0717, 0869, 0741,0783,
1158, 1099, 1304,1730,
0833, 0715
1071
0801, 0869, 0741
0790
0490, 0651
0717
0539, 0705
0582, 0702
0573, 0664, 1247
0672
0533, 0672, 1056,1061,
0830, 0794, 0796,0797,
1100, 1020, 0717, 0755
0672, 1056, 1061, 0830,
0794, 0796, 0797, 1100,
1004, 1020, 0717, 0755
1168
0790, 0717, 1071, 1121,
1122
1071
0717
0571
0695, 0699
0651
Apex Digital
Go Vision
GoldStar
Goodmans
Gradiente
Greenhill
Grundig
Harman/Kardon
Hitachi
Hiteker
IRT
Aspire Digital
Audiovox
Axion
Blaupunkt
Blue Parade
Blue Sky
Brandt
0783
Initial
Integra
JBL
JMB
JVC
Jensen
KLH
KLH Digital
Kawasaki
Kenwood
Kloss
0717
0571, 0627
0702
Broksonic
California Audio Labs
Celestial
Centrex
CineVision
Cinea
Citizen
Clairtone
Coby
Craig
Creative
Curtis Mathes
CyberHome
0695, 0868
0490
1020
0672, 1004
0869, 0876, 0833
0831
1003, 1277
0571
0778, 1107
0831
0503, 0539
1087
0816, 1023,1117,1024,
1129, 0874
0705
0695
0623, 1164, 0558, 0867
1016
1020, 0790, 0717, 1149
0717
0790
0490, 0534
0533
1061, 0651
0801, 0591, 0869, 0741
0798, 0627
1533
Koss
LG
Lasonic
Lecson
Lenoxx
Lite-On
LiteOn
Cytron
DVD2000
Daewoo
1127
0521
1058, 1158
1058, 1158, 1416, 1440
0511, 0741
0783
0869, 1172,0784,0770,
1169, 0705, 0833
0770
Loewe
Logix
Dansai
Decca
0770
Magnasonic
Magnavox
0675, 0651
0503, 0539,0675, 0646,
0821
Denon
Denver
DiViDo
0490, 0634
0778
0705
Marantz
McIntosh
Medion
Memorex
Microsoft
Minato
Mintek
Mitsubishi
NAD
0503, 0539, 0675
1533
0651
0695, 1270, 0831
0522
0752
0717, 0839
0521, 1521
0591, 0741
Digitrex
Disney
Dual
Durabrand
Electrohome
Emerson
Enterprise
Entivo
0672
0675, 1270
0675
1127
1003
0675, 0821, 1268,0591
0591
0503, 0539
0770
Enzer
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Your Remote Control
Manufacturer
Code
0695
Manufacturer
Code
0785, 0869
NEC
Naiko
Sansui
Sanyo
0770
0695, 0675, 0670, 1334,
Nesa
0717
0873
NexxTech
Norcent
Onkyo
Optimus
Orion
Oritron
Palsonic
Panasonic
1402
1003, 1107
0792, 0503, 0627
0571
0695
0651
0672
Schneider
Schwaiger
Sensory Science
Sharp
Sharper Image
Sherwood
Shinsonic
0783
0752
1158
0675, 1256, 0752, 0630
1117
0770, 1043
0533, 0839
0503, 0490, 1762,0703,
Slim Art
0784
1362, 1462, 1490, 0571
Sonic Blue
0573, 0869 ,0783, 1099,
Philips
0503, 0539, 0675,1267,
0715
0646, 0854, 1354, 1260
Sony
0533, 1033, 1431, 0864,
Phonotrend
PianoDisc
Pioneer
Polaroid
Polk Audio
Portland
Prima
0699
1024
0571, 0525, 0631
1061, 1020
0539
0770
1016
1533
1122
0821
Sova
Superscan
Sylvania
Symphonic
Tatung
0675, 0821, 1268, 0630
0675, 0821, 1268, 1334
0770
Teac
0809, 0571, 0790, 0717
ProVision
Proceed
Proscan
Prosonic
Qwestar
RCA
0778
0672
0522
0699
Technics
Technika
Tevion
Theta Digital
Thomson
Toshiba
0490, 0703
0770
0651
0571
0511, 0522
0503, 0695, 1045, 1154,
0651
0522, 0571,0822, 1132,
1022, 0790, 0717
0573, 0539
RadioShack
Radionette
Realistic
Reoc
Revoy
Rio
Rotel
Rowa
SVA
Saba
0571
0741
0571
0752
0699
0869
0623
1004, 0823
0717
US Logic
USLogic
Unimax
Universum
Urban Concepts
Venturer
Wesder
Xbox
0839
0839
0770
0591
0503, 0539
0790
0699
0522
Yamaha
Zenith
Zeus
0490, 0539, 0545
0503, 0591, 0869, 0741
0784
0651
0752
Sampo
Samsung
0490, 0573,0820, 1075,
0899, 1044, 0744
iLo
1348
CARE
• Keep the remote dry. If it gets wet, wipe it dry immediately.
• Use and store the unit only in normal temperature environments.
• Handle the remote gently and carefully. Don’t drop it.
• Wipe the remote with a damp cloth to keep it looking like new.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Questions? Need some help?
Call our toll-free number found on the insert with this icon:
20070710
Download from Www.Somanuals.com. All Manuals Search And Download.
|