Polaroid Digital Camera IS326 RED User Manual

IS326

USER MANUAL

Windows and the Windows logo are registered trademarks of Microsoft Corporation.

All other trademarks are the property of their respective companies.

Download from Www.Somanuals.com. All Manuals Search And Download.

Thank you for purchasing this digital camera. Everything you need to take quality digital photos

and videos is included with your digital camera.

Polaroid makes capturing those special moments as easy as possible.

Please read this manual carefully first in order to get the most out of your digital camera.

Note: Your camera needs an SD Memory card (up to 32GB) for normal use.

SD Memory cards are not included and need to be purchased separately.

1. Digital Camera

2. USB Cable

3. Polaroid Instant Memories

Software Installation CD

4. AC Charger

5. Wrist Strap

6. Built-in Lithium Battery (not shown)

Note: SD Memory Card not included.

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Power Button

2. Shutter Button

3. LCD Screen

12. Delete / Right Button

13. Insta-Share / Down Button

14. Flash Light

4. LED

15. USB Slot

5. Zoom Out Button

6. Zoom In Button

7. RESET

16. Tripod Mount

17. Optical Lens

18. Memory Card Slot

19. Wrist Strap Connector

20. Self-Timer LED Indicator

21. Microphone

8. MODE Button

9. SET Button

10. Scene / Left Button

11. Flash / Up / Slide Show button

22. Speaker

Download from Www.Somanuals.com. All Manuals Search And Download.

 SD Memory card (up to 32GB)

needed for normal use.

 To Charge the Battery:

1. Power off the camera.

2. Connect the camera with the USB cable

to the AC charger or to the computer (as

shown above).

3. Allow the battery to charge for at least 3

hours before using the first time.

4. The charge light will turn off when the

battery is fully charged.

Download from Www.Somanuals.com. All Manuals Search And Download.

When powering the camera ON for the first time the camera will take you through the initial

camera setup.

1) Charging the Battery

To charge your battery, first connect the USB Cable to your camera.

Then follow one of the steps below:

A) Charge the battery using the USB connection cable (included) and your computer:

- Connect one end of the USB cable into the USB port on your camera.

- Connect the other end of the USB cable to the USB port on your computer.

B) Charge the battery using the USB connection cable (included) and the AC Adapter

(included).

- Connect one end of the USB cable into the USB port on your camera.

- Connect the other end to the AC Adapter and then plug the AC Adapter into a power

socket.

NOTE: While charging the battery, the LED light turns on. The battery is fully charged

when the LED light turns off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Battery Power:



Some features, will not work if the battery power level is low.

When the battery power is low the battery icon turns red and the camera will

automatically turn off a few seconds later.



The energy status of the power is displayed on LCD as shown below:

Full battery power

Medium battery power

Low battery power

2) SD Card

Make sure an SD card has been properly inserted into your camera. (SD card not included.)

To properly insert the SD Card:

 Push the SD card into the slot in the direction shown on the camera (see SD icon by the

SD card slot).

 Push the SD card until you hear a slight clicking sound. This indicates the SD card has

been inserted correctly.

NOTE:



After the camera is powered on, an SD icon will appear on the LCD display. If you do not

see the SD icon on the display, please check if the card was inserted properly.

Make sure the SD card is not locked (check the lock switch on the side of the SD card).

If the SD card is locked this will prevent the camera from saving captured photos to the

SD card.



3) Power On

Press the

POWER button to turn on the camera.

Download from Www.Somanuals.com. All Manuals Search And Download.

After powering on your camera for the first time, you will be prompted to select a language for the

camera. The Language selection menu appears. Select the language of your choice by pressing

the UP and DOWN direction control buttons. Then press the SET button to confirm the selection.

Once a language has been selected, you will be asked if you would like to continue with the initial

camera setup. A message will appear: “Continue with Camera Setup?”

Select “Yes” to continue or “No” to exit the setup.

Note: If you select “No” and decide to leave the camera setup, the camera will be set to its default

settings. These settings can be adjusted at any time manually through the menus in the camera.

The next step in the initial camera setup is to set the date and time on the camera.

Set the Date and Time as desired by pressing the RIGHT and LEFT direction control buttons to

choose the specific setting and the UP and DOWN buttons to change each setting.

Once you have completed setting the time and date, press the SET button to confirm the

selection and finish the camera setup.

Next you will be asked to set the default Insta-Share destination for photos and videos taken with

your camera.

The Insta-Share technology allows you to quickly and easily upload your camera’s photos and

videos to social networks with the accompanying software application.

1) First you will be asked to choose the default Insta-Share social network for Photos. Highlight

the desired default social network and press the SET button to confirm the selection.

2) Next you will be asked to choose the default Insta-Share social network for Videos. Highlight

the desired default social network and press the SET button to confirm the selection.

Congratulations! Your camera is now ready to use.

Download from Www.Somanuals.com. All Manuals Search And Download.

Your camera has different modes for the various camera functions.

You can switch modes by pressing the MODE button on your camera after the camera has been

powered ON.

Use this mode to capture pictures with your camera.

This is the default mode when the camera is powered ON.

To take a picture, aim your camera as desired and press the Shutter button.

The picture will be automatically saved to your camera’s memory card.

To access the various menus for the Photo Capture mode, press the SET button while in

the Photo Capture mode.

Use this mode to capture videos with your digital camera.

After turning on your camera, press the MODE button once to open the Video Capture

mode. To take a video, aim your camera as desired and press the Shutter button to start

the record. A red record indicator will appear on the LCD screen while record is in progress.

To stop the record, press the Shutter button again. The video will be automatically saved to

your camera’s memory card.

To access the various menus for the Video Capture mode, press the SET button while in the

Video Capture mode.

Use this mode to view and manage the photos and videos on your camera.

After turning on your camera, press the MODE button twice to open the Playback mode for

photos and videos. You can scroll through the photos and videos that you’ve previously

taken to view, edit or delete them as desired.

To access the various menus for the Playback mode for photos and videos, press the SET

button while in the Playback mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Image Sensor

CMOS Sensor

4608x3456 (16M), 4000x3000 (12M), 3648x2736 (10M),

264x2448 (8M), 3648x2048 (7MHD), 2592x1944 (5M),

2048x1536 (3M), 1920x1080 (2MHD), 640x480 (VGA)

Image Resolution

Video Resolution

File Format

External Memory

LCD Display

Lens

1280x720 (720P), 640x480 (VGA), 320x240 (QVGA)

JPEG (Photo) /AVI (Video)

SD MMC SDHC (up to 32G)– SD Card not included

2.4 Inch TFT LCD

f=6.2~12.4 , F3.0~4.5

Zoom

3X Optical Zoom ; 4X Digital Zoom

-3.0EV ~ +3.0EV

Exposure

White Balance

ISO

Auto, Daylight, Cloudy, Fluorescent, Incandescent

Auto, 100, 200, 400

Auto, Scenery, Portrait, Night Scenery, Night Portrait, High

Sensitivity, Beach

Scene

Flash

Auto, Forced On, Red Eye, Off

Self-Timer

Anti-Shake

Face Detect

Print Photos

Macro

2, 5 or 10 second delay

Yes

Auto Power Off

1, 3 or 5 minutes

English, French, Spanish, Portuguese, German, Italian, Russian

Polish, Greek

Language

Microphone

Speaker

Yes

Interface

USB 2.0 (HS)

Windows XP (SP 3), Vista (SP1) and 7 ;

Mac OSX v10.5.x and above

System Requirements

Battery

Built-in Lithium Battery

Working Temperature

0~40C

Download from Www.Somanuals.com. All Manuals Search And Download.

To be able to download photos and videos to your PC using the Polaroid Instant Memories

Software, you will need the following minimum configuration:

 Microsoft® Windows XP with Service Pack 3, Windows Vista with Service Pack 1 or Windows 7

 Pentium® 4 processor (or above)ꢀ

 1 GB of RAM, with 250 MB of free hard disk spaceꢀ

 16-bit Color monitor, 1024 X 768 recommended screen resolutionꢀ

 CD-ROM Drive

 QuickTime® 6 or higherꢀ

 Microsoft® Internet Explorer 7 or higher

 Windows Media Player 10 or higherꢀ

 DirectX 9 or higher

 Internet connection required to access social networks and software features

To be able to download photos and videos to your Macintosh using the Polaroid Instant Memories

Software, you will need the following minimum configuration:

 Intel processor running Mac OS X v10.5.x or later

 1 GB RAM, 250 MB free hard disk space

 Display: 1024 x 768 or higher-resolution monitor

 QuickTime® 6 or higher

 CD-ROM Drive

 Internet connection required to access social networks and software features

Download from Www.Somanuals.com. All Manuals Search And Download.

 Make sure the built-in lithium battery has been fully charged before the first use.

 Make sure an SD card has been inserted into your camera.

(SD card up to 32GB - SD Card not included)

Please see Initial Camera Setup for more information.

Press the

Power button to turn your camera ON.

 After powering on, the camera emits a sound and the LED light turns on briefly.

 The LCD screen turns on with your camera in Photo Capture mode to start.

While the camera is on, you can press the

camera OFF.

Power button again at any point to turn your

Note: Your digital camera also has an Auto Power Off feature that automatically turns off your

camera after a specific period of time that your camera is left idle. The Auto Power Off settings

can be set from the Auto Power Off settings menu (in either Photo Capture Mode or Video

Capture Mode).

Download from Www.Somanuals.com. All Manuals Search And Download.

Your camera has three main modes:

1) Photo Capture Mode - Use this mode to capture photos with your camera.

2) Video Capture Mode - Use this mode to capture videos with your camera.

3) Playback Mode (for photos and videos) - Use this mode to view the photos and videos

you have already taken with your camera.

 When the camera is first powered ON, the Photo Capture Mode will be active.

 The icons that appear on the LCD screen are the best default settings so that you can begin to

capture and enjoy clear quality photos and videos.

To change the active camera mode, make sure the camera is powered ON and press the MODE

button.

When in Photo Capture Mode, this icon will display on the top-left corner of the LCD display

When in Video Capture Mode, this icon will display on the top-left corner of the LCD display

When in Playback Mode, this icon will display on the top-left corner of the LCD display

Download from Www.Somanuals.com. All Manuals Search And Download.

Each camera mode has a set of menus specific to that mode.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll between the various menus for

the current mode.

3) Press the UP or DOWN direction control button to highlight the desired menu selection.

4) Press the SET button to confirm and save the highlighted menu option.

5) If the selection can be remembered by the camera, a

selection icon will appear to the

right of the selected menu option. Changes made to these options will remain as is until you

decide to change them again at a later time.

6) Some menu options are single-use functions that are not remembered by the camera and

do not display this icon when selected.

7) At any time you can press the MODE button to exit the menus and return to the previous

screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Photo Capture mode allows you to capture pictures with your digital camera.

When the camera is first powered ON, the camera will be in Photo Capture Mode by default.

1) While in Photo Capture mode, use the LCD display on the back of the camera to direct the

camera at the scene you would like to capture.

Press the T/Zoom In and W/Zoom Out buttons to zoom in/out if desired.

Note: The actual shape of these buttons may vary per camera model.

Optical and Digital Zoom:



As you press the Zoom buttons, a bar indicator moves up and down the

rectangular box on the right side of the LCD screen according to the zoom

used. The bottom section of the box shows the Optical Zoom and the top

section displays the Digital Zoom.

Bar indicating the zoom.



To use the Optical Zoom: Press the T/Zoom In and W/Zoom Out buttons. The Optical

Zoom stops when the bar reaches the top of the Optical Zoom section of the box.

To use the Digital Zoom: Press the T/Zoom In button. Once you reach the maximum of

the Optical Zoom, re-press the T/Zoom In button to continue zooming using the Digital

Zoom.

3) Lightly press the Shutter button to focus on the subject. When the brackets in the center of

the LCD appear green the subject is in focus. Fully press the Shutter button on the top of

the camera to take the picture.

4) The picture is automatically saved to the camera’s SD memory card.

Download from Www.Somanuals.com. All Manuals Search And Download.

Your digital camera has a four-directional pad that functions as Quick Function buttons:

Button

Left

Function

Scene Selection – Opens the Scene menu

Flash Options – Toggles the Flash options appearing on the LCD

(See ‘Flash Options’ below for further information.)

Delete – Opens the ‘Delete This Photo’ option and allows you to view and

Right

delete the last photo taken

Down

INSTA Share – Opens the INSTA Share for Photos menu

Other

Shutter

Captures the photo

 Opens the menu options for Photo Capture Mode

 Saves your selected menu option

SET

Note: To navigate through the Menus, use the UP/DOWN/LEFT/RIGHT

direction control buttons.

 Toggles between the Photo Capture Mode, Video Capture Mode and

Playback Mode

 Exits the menu screen

Zooms In

MODE

Zooms Out

The display of the icons on the LCD screen can be hidden or visible as desired.

1) Hold the MODE button for 2 seconds to hide the display of the icons on the screen.

2) Press the MODE button again to redisplay the icons on the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

There are several Flash options available on your camera. The options appear on the Photo

Capture Mode LCD screen in sequence.

To change the Flash mode, press the UP Quick Function button until you arrive at your desired

settings.

Important: When using Flash, stand between 8 to 10 feet away from the scene you would like to

capture.

Note: The MACRO mode must be turned OFF when you want to use the Flash.

To change the Macro setting:

 Press SET to open the menus and scroll to the ‘Macro’ menu.

 Select ‘Off’. (See the section titled ‘Macro Menu’ for more details).

When Macro is OFF, the mountain icon appears on the LCD display.

Flash Type

Description

 No flash will appear.

 Use this when you do not want to activate Flash.

NOTE: A ‘Turn On Flash’ message appears when the camera

detects a need for flash. When this message appears, it is

recommended to press the Flash/Up button and select one of the

flash options: Auto Flash, Forced On or Red-Eye Reduction.

 When you want the camera to determine if Flash is needed, select

Auto Flash.

Forced Off (Default)

Auto Flash

 The flash will automatically turn on according to the lighting

conditions.

 When the LED light stops blinking, the Flash is ready for use.

Note: In some cameras, an initial flash appears to test your

lighting conditions. If flash is needed, a second flash will appear

upon taking the photo.

 The flash is enabled for each photo.

 Note: If you use this option in a well lit environment, your photo

may be appear too bright/light (overexposed).

 Eliminates the red-eye effect in a photo caused by flash.

Forced On

Red Eye Reduction

Download from Www.Somanuals.com. All Manuals Search And Download.

The following are the menus that appear in your camera’s Photo Capture Mode:

Download from Www.Somanuals.com. All Manuals Search And Download.

The Scene Menu allows you to choose scene settings that let your camera to adapt properly to

your current environment.

Note: When selecting the HIGH SENSITIVITY Option, by default the camera switches off the

FLASH automatically (if it’s ON) to optimize the picture quality. If however, you would like to

override it and manually turn ON the flash – you can do so.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Scene menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

The Image Resolution menu allows you to choose the desired size of the images taken by your

camera. Keep in mind that images with a higher resolution will also take up more of your

camera’s memory.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Image Resolution

menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

Download from Www.Somanuals.com. All Manuals Search And Download.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

The Image Quality menu allows you to select the desired quality level of the images taken by your

camera. Keep in mind that images with a higher image quality level will also take up more

memory on your camera.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Image Quality

menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

The Self-Timer menu allows you to set a delay between the time that the camera’s Shutter button

is pressed and the actual capture of the picture.

This is an optimal feature if you don’t just want to take the picture but would also like to be in the

picture yourself. Just set the desired Self-Timer delay, press the Shutter button on your camera

and position yourself in front of the camera as desired.

1) Press the SET button to open the menus for the current mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

2) Press the LEFT or RIGHT direction control button to scroll and select the Self-Timer menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

The Anti-Shake feature reduces image distortion that can be caused by movement of the camera

while capturing the image.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Anti-Shake menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Face Detect feature when set to ‘On’ allows the camera to use a subject’s face as the basis

for balancing the other colors and focus in the camera’s display. This feature is meant to ensure

that the color and focus of your pictures will be consistently sharp and high-quality.

Note: To properly use the Face Detect option, please ensure the following:

 Macro mode Off - Face Detect will not work if the camera is in Macro mode. Select the Macro

‘Off’ option in the Macro menu. The mountain

icon will appear on the LCD.

 Anti-Shake On - Ensure that the Anti-Shake option is set to ‘On’. The Anti-Shake option is

‘On’ by default when you start using your camera and assists you in properly focusing the

image.

 Distance from the camera – The subject’s face must be no further than 8 to 9 feet (3.5

meters) from the camera and the face must cover at least 20% (1 / 5th) of the picture as

viewed on the LCD screen.

 Facing the camera - The face of the subject(s) you are photographing must be facing the

camera and must hold the pose for at least 4 to 5 seconds until the green square(s) appears

around the subject’s face.

Face Detect will not work with a side shot of the subject’s head.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Face Detect menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

Your camera contains a Macro Menu that allows you to enable or disable the Macro mode on

your camera. While using the Macro mode, you can focus on an object that is close to the camera,

allowing you to capture images at close range (15 ~ 30 cm).

Macro ON:

 To turn the Macro mode ON, select ‘On’ from the Macro Menu options.

 The flower icon

appears on the LCD and indicates that the Macro mode is ON.

Macro OFF:

 To turn the Macro mode OFF, select ‘Off from the Macro Menu options.

 The mountain icon appears on the LCD display.

 When Macro mode is off, images can be captured from 1.5m - ∞ (infinity).

Note: The Macro mode must be turned OFF when you want to use the following features of your

camera: Flash and Face Detect.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Macro menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

The White Balance feature allows your camera to adjust the coloring of the captured images

depending on the type of light source in the current environment.

Properly adjusting the White Balance setting to match your current environment will allow the

Download from Www.Somanuals.com. All Manuals Search And Download.

camera to properly balance the colors in the images that are taken with your camera.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the White Balance

menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

You can choose to add a color effect to the images taken with your camera.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Color Effect menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

When enabled, the Multi SnapShots feature allows you to take six rapid snapshots in a row with a

single click of the Shutter button.

This feature can be effective when trying to capture a particular moment in a sporting event or

other scenes with quick movements.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Multi SnapShots

menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

You can set the level of sharpness in the images taken with your camera. The sharpness level

dictates if the edges of objects in the image are more or less distinct.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Image Sharpness

menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

The Light Exposure setting helps you control the amount of light that enters your camera’s lens.

This setting should be adjusted when the environment is lighter or darker than normal.

When the environment has more light than is needed, reduce the exposure setting (by using the

negative - count) to reduce the amount of light allowed into the lens by your camera.

If the environment has less light (darker) than is needed, increase the exposure setting (by using

the positive + count) to increase the amount of light allowed into the lens by your camera.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Light Exposure

menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Press the SET button to select the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

The ISO menu allows you to set the level of sensitivity that your camera has to light in the

surrounding environment. When the ISO level is increased, the image sensor in your camera will

be more sensitive to light and allow you to capture images in lower-light situations. The higher

sensitivity to light however, may reduce the quality of the images that are taken.

Download from Www.Somanuals.com. All Manuals Search And Download.

When the ISO is reduced, the image sensor in your camera will be less sensitive to light and will

optimize the image quality in environments with bright lighting.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the ISO menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

The Metering setting will affect how your camera focuses when capturing an image. Depending

on your selection, the camera will be more sensitive to focusing on particular areas in the display

and adjust the image color and lighting accordingly.

Center – Averages the light metered from the entire frame, but giving greater weight to the

subject in the center

Multi – Used in standard conditions the camera divides and adjusts the settings of the image into

several zones for light metering such as complex light conditions, position of subject, brightness,

background, direct light and scenes

Spot – Meters the area within the spot point frame at the center of the LCD to set the exposure

on the subject in the center of the monitor.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Metering menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select the desired option.

selected option icon will appear on the selected item.

Download from Www.Somanuals.com. All Manuals Search And Download.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

You can select your camera’s language setting by selecting the desired language from the

Language menu.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Language menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

When you capture an image with your camera, the image will include a time stamp with the date

and time that the image was taken.

The Date/Time menu allows you to set your camera’s date and time as desired. You can also

disable the timestamp for future images that will be taken with your camera.

On – The timestamp will appear on photos taken

Off – The date stamp will not appear on photos taken

Download from Www.Somanuals.com. All Manuals Search And Download.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Date/Time menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select the desired option.

selected option icon now appears to the right of the option name.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control buttons to scroll and select the Date/Time menu.

3) Press the UP or DOWN direction control buttons to scroll through the menu options.

4) Highlight the “Date Setup” menu option.

5) Press the SET button to select the desired option.

6) The “Date Setup” submenu will open.

7) Scroll through the window with the RIGHT and LEFT navigation buttons. For each field in

the menu, use the UP and DOWN navigation buttons to set the time and date.

8) Press the MODE button to exit the menu and return to your previous screen.

You have the option of activating the camera’s Silent mode to disable all of the sound effects

(except for beeps heard during the Self-Timer countdown) that the camera emits when

performing camera functions.

Note: The camera features that emit sounds include - Power On, Power Off, Shutter ‘Click’ and

Self-Timer.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Silent Mode Options include:

 Silent Mode Off (default): All camera features will emit sound when activated.

 Silent Mode On: All camera features will not emit sound EXCEPT for the Self-Timer and

associated Shutter ‘Click’ at the end of the Self-Timer countdown.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Silent menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

You can use the Auto Power Off feature in order to conserve you camera’s battery life. The

designated time represents when your camera will automatically power off.

When the camera sits idle for the designated period of time, the camera will shut off completely

and will need to be powered on again with the power button before the next use.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Auto Power Off

menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

The options in the Frequency menu represent the frequency of the electrical current in

fluorescent lighting sources in your locale. If your camera is set to a frequency that does not

match your country’s electric current, you may see waves on the images taken by your camera.

50Hz – UK, Europe and Australia

60Hz – US, Canada and South America

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Frequency menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

You can use the Format Memory Card menu to delete all of the content that is currently on your

camera’s memory card.

Keep in mind that formatting the memory card will permanently delete all of the content on

your camera’s memory card.

This option will delete all of the content at one time. If you would like to delete individual images,

use the delete menu in the camera’s Playback mode.

Note: Restoring factory defaults or formatting the camera may result in the loss of data.

Please ensure you have backed up your images before you attempt this.

defaults or formatting the player may result in the loss of data. Please ensure you have backed up

all important files before you attempt this

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Format Memory

Download from Www.Somanuals.com. All Manuals Search And Download.

Card menu.

3) Press the UP or DOWN direction control button to highlight the menu options.

4) To exit without formatting the card, select ‘Cancel’ and press the SET button.

5) To proceed with the format, select “Yes” and press the SET button.

You will be asked to confirm the formatting of the memory card.

 Select “No” to exit without formatting.

 Select “Yes” and press the SET button to begin the format.

The memory card will be completely formatted.

Use this menu to view the Firmware version on your camera or to reset your camera settings to

the Factory Default Settings.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Firmware menu.

3) The “Default Setting” is selected.

4) Press the SET button to reset the camera to the factory default settings.

5) You will be asked to confirm the resetting to the factory default settings.

 Select “No” to exit the menu and return to the previous mode without resetting to the

default settings.

 Select “Yes” and press the SET button to proceed with the reset.

You will then automatically exit the menu and return to the previous mode with the digital

camera settings set to the Factory Default Settings.

Note: After RESETTING to the default settings, it is recommended to select your system

Language, Date/Time and Insta-Share for Photos and Videos. If you do not, the next time your

camera is powered on, you will be prompted to define those settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Playback Mode allows you to review and edit photos and videos that you’ve already taken

with your camera.

 When you first turn on the camera, the camera will be in Photo Capture mode by default.

 Press the MODE button twice to open the Playback Mode.

 The latest captured image appears on the LCD screen. If there are no images stored, a

message (No File) appears.

1) Select your Photo:

 Once in Playback Mode, press the LEFT or RIGHT direction button to scroll through the

images on your camera’s memory card until you find the image you would like to view.

 Each captured image (video and photo) is displayed on the LCD screen.

 Photos appear with a ‘JPG’ icon on the top left of the LCD screen.

2) Zooming In/Out of your selected Photo:

 Press the UP / Zoom In button to Zoom In and magnify the selected photo.

Use the UP / DOWN / LEFT / RIGHT direction buttons to navigate around the photo.

 Press the DOWN / Zoom Out button to Zoom Out of the selected photo.

Use the UP / DOWN / LEFT / RIGHT direction buttons to navigate around the photo.

Easily navigate and select the image you wish to view by using the Thumbnail View.

The images on your camera will be displayed in a 3 X 3 matrix where you can use the direction

buttons to scroll and select images from the thumbnails.

1) Press the W / Zoom Out button.

All the images on your camera will appear in the Thumbnail View.

2) Use the UP / DOWN / LEFT / RIGHT direction buttons to scroll and select the image you

wish to view.

3) Press the SET button to enlarge the selected image full size.

4) Once the selected photo is full size you can zoom in/out and edit the photo.

Download from Www.Somanuals.com. All Manuals Search And Download.

Your digital camera has a four-directional pad that functions as Quick Function buttons.

Quick Function Button

Left

Function

Displays the PREVIOUS image

Views all the Photos as a Slide Show with 3, 5 or 10 second

intervals. To exit the Slide Show, press any button.

Displays the NEXT image

Right

Down

Insta-Share – Opens the Insta-Share for Photos menu

Other

SET

 Opens the menu options for Photo Playback Mode

 Saves your selected menu option

Note: To navigate through the Menus, use the

UP/DOWN/LEFT/RIGHT direction control buttons.

 Toggles between the Photo Capture Mode, Video Capture

Mode and Playback Mode

MODE

 Exits the menu screen

Opens Thumbnail View

 To Navigate in the Thumbnail View: press the UP / DOWN /

LEFT / RIGHT direction buttons

W/Zoom Out

T/Zoom In

 To select a JPG in the Thumbnail View: press the SET button

 Zooms Out of selected photo

Zooms In to selected photo

Download from Www.Somanuals.com. All Manuals Search And Download.

The following are the menus that appear in your camera’s Photo Playback Mode:

While in the Playback Mode, you can delete captured photos and videos from your camera

through the Delete menu.

1) Select the photo you would like to delete.

2) Press the SET button to open the menus for the Photo Playback mode.

3) Press the LEFT or RIGHT direction control button to scroll and select the Delete menu.

4) Press the UP or DOWN direction control buttons to scroll through the menu options.

5) To delete the selected photo:

Select “Delete This Photo?” and press SET button.

You will be asked to confirm the deletion of the photo.

 If you would like to proceed with deleting the current image: select ‘Yes’ and press the

SET button to confirm. The photo will be deleted and you will exit the menu and return to

the Playback mode.

 If you do not want to delete the current image: select ‘No’ and press the SET button. The

photo will not be deleted and you will exit the menu and return to the Playback mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

6) To delete all the images (videos and photos) you have saved on your SD Memory card:

Select ‘Delete All Images?’ and press the SET button.

 If you would like to proceed with deleting all the videos and photos, select ‘Yes’ and press

the SET button to confirm.

All of your images will be permanently deleted.

A blank ‘No Files Exist’ screen will appear.

Press the MODE button to exit the ‘No Files Exist’ screen and return to Photo Capture

mode.

 If you do not want to delete all of your videos and photos, select ‘No’ and press the OK

button. All images will remain on your SD card and you will exit the menu and return to

the Playback mode.

Remember: All images will be deleted except images that are Protected/Locked.

To delete a locked image, first unlock the image, then select delete.

The INSTA Share technology allows you to quickly and easily upload your camera’s photos and

videos to the social networks of your choice with the accompanying Polaroid Instant Memories

application.

Note: The INSTA Share feature is deactivated by default. An INSTA Share destination will only be

assigned to a photo or video if you manually set it from this menu or from the INSTA Share menu

in Capture mode (accessible using the INSTA Share Quick-Function button in Capture mode).

1) View the image to which you would like to add an INSTA Share.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the INSTA Share for

Photos menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item

6) Press the MODE button to exit the menu and return to your previous mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

7) An icon will appear on the image with the selected INSTA Share destination site.

8) Changing the INSTA Share destination site will also make the selected site the new default

INSTA Share option. A new default can be selected at any time through this menu.

Remember: You can also easily access the INSTA Share menu by pressing the INSTA Share

(Down) button.

Use this menu to rotate the pictures that you’ve taken with your camera.

1) Select the photo you would like to rotate.

2) Press the SET button to open the menus for the current mode.

3) Press the LEFT or RIGHT direction control button to scroll and select the Rotate menu.

4) Press the UP or DOWN direction control button to scroll through the menu options.

5) Press the SET button to select and save the desired option.

6) The selected picture will now appear rotated in the Playback mode.

You can crop any picture on your camera with the Crop feature.

1) View the photo you would like to crop.

2) Press the SET button to open the menus for the current mode.

3) Press the LEFT or RIGHT direction control button to scroll and select the Crop menu.

4) Press the UP or DOWN to highlight the Crop option.

5) Press the SET button to open the Crop option.

6) The Crop window will open on the selected picture.

7) Use the directional buttons to move the Crop box to define the desired crop area.

8) Use the W/T Zoom buttons on the camera to enlarge or shrink the Crop box.

9) When you are ready to crop, press the Shutter button.

10) When you see the cropped picture appear, press the Shutter button again to save or press

the SET button to cancel and return to the previous menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

11) If you selected to save, the cropped picture will now be saved as a new picture to your

memory card.

Pictures and Videos taken with your camera can be protected or “locked” to prevent any deletion

or alteration being made to the files.

1) View the image you would like to protect/lock.

2) Press the SET button to open the menus for the current mode.

3) Press the LEFT or RIGHT direction control button to scroll and select the Protect/Lock

menu.

4) Press the UP or DOWN direction control button to scroll through the menu options.

5) Press the SET button to select the desired option.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

Note: Any image that is locked will display a lock symbol on the LCD screen when viewing that

image in the playback mode. Photos that are not locked will not display the lock symbol.

Remember that you cannot delete or edit photos while they are locked.

You can use the Print Photos menu to print the photos that are on your camera directly to a

Pictbridge compatible printer.

1) Scroll through your pictures and find the one you would like to print.

2) Press the SET button to open the menus for the current mode.

3) Press the LEFT or RIGHT direction control button to scroll and select the Print This Photo

menu.

4) Press the UP or DOWN direction control button to scroll through the menu options.

5) Press the SET button when highlighting the “Print This Photo” option to print the selected

photo.

6) You will be asked to connect the camera to the Pictbridge printer.

Download from Www.Somanuals.com. All Manuals Search And Download.

7) Connect the USB cable provided in the package from the camera to the Pictbridge port of

the printer.

8) Once connected, follow the instructions on the printer to proceed with the printing process.

9) Select the “Cancel” option to exit the menu and return to the previous mode.

You can view a Slide Show of all the pictures taken with your camera by pressing the UP Quick

Function button while in Playback mode. The Slide Show menu allows you to set the interval

length of time that each picture will display during the slide show.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Slide Show menu.

3) Setting up the Interval:

Press the UP or DOWN direction control button to scroll through the menu options.

Select the 3, 5, or 10 second interval option, then press SET to confirm.

4) Beginning the Slide Show:

Press the UP button.

Press any button to exit the Slide Show.

5) Press the LEFT or RIGHT button to select the next menu item, if you wish to view other

menus without viewing the Slide Show.

6) Press the MODE button to exit the menu and return to your previous mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Video Capture Mode allows you to capture videos with your digital camera.

When the camera is first powered ON, the camera will be in Photo Capture Mode.

Press the MODE button once to access the Video Capture Mode.

1) While in Video Capture Mode use the LCD display to direct the camera at the scene you

would like to capture.

Press the T/Zoom In and W/Zoom Out buttons to zoom in/out if desired.

Note: The actual shape of these buttons may vary per camera model.

Optical and Digital Zoom:



As you press the Zoom buttons, a bar indicator moves up and down the

rectangular box on the right side of the LCD screen according to the zoom

used. The bottom section of the box shows the Optical Zoom and the top

section displays the Digital Zoom.

Bar indicating the zoom.



To use the Optical Zoom: Press the T/Zoom In and W/Zoom Out buttons. The Optical

Zoom stops when the bar reaches the top of the Optical Zoom section of the box.

To use the Digital Zoom: Press the T/Zoom In button. Once you reach the maximum of

the Optical Zoom, re-press the T/Zoom In button to continue zooming using the Digital

Zoom.

3) Press the Shutter button to START the video capture.

A blinking red icon and the elapsed time appear at the top of the LCD indicating that the

record is in progress.

4) To STOP the video record, press the Shutter button again.

5) The video is automatically saved to the camera’s SD memory card.

Download from Www.Somanuals.com. All Manuals Search And Download.

Your digital camera has a four-directional pad that functions as Quick Function buttons.

Quick Function Button

Left

Function

Scene Selection - Opens the Scene menu

Light Exposure – Opens the Light Exposure menu

Delete - Opens the ‘Delete This Video’ option and allows you

Right

to view and delete the last video taken as well as previously

captured videos

Down

INSTA Share – Opens the INSTA Share for Videos menu

Other

STARTS/STOPS the video capture

Shutter

 Opens the menu options for Video Capture Mode

 Saves your selected menu option

Note: To navigate through the Menus, use the

UP/DOWN/LEFT/RIGHT direction control buttons.

 Toggles between the Video Capture Mode, Photo Capture

Mode, and Playback Mode

SET

MODE

 Exits the menu screen

Zooms In

Zooms Out

The display of the icons on the LCD screen can be hidden or visible as desired.

1) Hold the MODE button for 2 seconds to hide the display of the icons on the screen.

2) Press the MODE button again to redisplay the icons on the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

The following are the menus that appear in your camera’s Video Capture Mode:

Download from Www.Somanuals.com. All Manuals Search And Download.

The Scene Menu allows you to choose scene settings that let your camera to adapt properly to

your current environment.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Scene menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

The Image Size menu allows you to choose the desired size of the images taken by your camera.

Keep in mind that images with a larger size will also take up more of your camera’s memory.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Image Size menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Image Quality menu allows you to select the desired quality level of the images taken by your

camera. Keep in mind that images with a higher image quality level will also take up more

memory on your camera.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Image Quality

menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

Your camera contains a Macro Menu that allows you to enable or disable the Macro mode on

your camera. While using the Macro mode, you can focus on an object that is close to the camera,

allowing you to capture images at close range (15 ~ 30 cm).

Macro ON:

 To turn the Macro mode ON, select ‘On’ from the Macro Menu options.

 The flower icon

appears on the LCD and indicates that the Macro mode is ON.

Macro OFF:

 To turn the Macro mode OFF, select ‘Off from the Macro Menu options.

 The mountain icon appears on the LCD display.

 When Macro mode is off, images can be captured from 1.5m - ∞ (infinity).

Note: The Macro mode must be turned OFF when you want to use the following features of your

Download from Www.Somanuals.com. All Manuals Search And Download.

camera: Flash and Face Detect.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Macro menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

The White Balance feature allows your camera to adjust the coloring of the captured images

depending on the type of light source in the current environment.

Properly adjusting the White Balance setting to match your current environment will allow the

camera to properly balance the colors in the images that are taken with your camera.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the White Balance

menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen.

9) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

You can choose to add a color effect to the images taken with your camera.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Color Effect menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera’s default factory settings.

You can set the level of sharpness in the images taken with your camera. The sharpness level

dictates if the edges of objects in the image are more or less distinct.

1) Press the SET button to open the menus for the current mode.

2) Press the LEFT or RIGHT direction control button to scroll and select the Image Sharpness

menu.

3) Press the UP or DOWN direction control button to scroll through the menu options.

4) Press the SET button to select and save the desired option.

selected option icon will appear on the selected item.

6) Press the LEFT or RIGHT button to select the next menu item.

7) Press the MODE button to exit the menu and return to your previous mode.

8) An icon reflecting your selection will display on the LCD screen