™
MDA200
Audio Switcher
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Congratulations on purchasing your new Plantronics product. This guide contains instructions
for setting up and using your MDA200 audio switcher.
Please refer to the separate safety instructions for important product safety information prior
to installation or use of the product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
What’s in the Box
Telephone Interface Cable
MDA200 Audio Switcher
4
Download from Www.Somanuals.com. All Manuals Search And Download.
MDA200 Basics
FRONT/TOP
BACK
1
2
4
5
6
7
3
BOTTOM
9
1 Computer talk button
8
2 Desk phone talk button
3 USB headset/USB wireless adapter port
(headset and adapter not included)
4 USB cable (connect to computer)
5 Handset lifter/EHS cable jack
6 Telephone interface cable jack
7 Power jack
10
8 Configuration slide switch
9 Listening volume dial
10 Speaking volume dial
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
1
2
3
4
5
1 Electronic Hookswitch Cable Electronically and automatically takes your desk phone handset
off hook. Enables remote call answer/end with your headset.
2 On Line Indicator (OLI) A light that flashes once a call is activated. It allows others to know
when you are on a call.
3 HL10™ Lifter Automatically lifts handset and returns it to the cradle. Enables remote call
answer/end with your headset.
4 AC Power Supply Required when using the HL10 lifter.
5 USB Extension Cable Extends the length of the USB cable between the MDA200 and
computer.
See plantronics.com/accessories for more information on all accessories.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Your Headset
1 Connect your Plantronics supported USB corded headset or wireless USB headset adapter to
the MDA200 USB headset port.*
NOTE Your headset will continue to function as if it were connected directly to the computer.
*For a list of supported headsets and wireless USB headset adapters see plantronics.com/support.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Desk Phone: Connect and Call
There are three setup options for connecting the MDA200 to your desk phone. Select one of
the following and continue.
• Desk phone (standard)
• Desk phone + HL10™ lifter and power supply (sold separately)
• Desk phone + EHS cable (sold separately)
NOTE If you will be using Desk phone (standard) or Desk phone +HL10 lifter and power
supply continue below. If you will be using the Desk Phone + EHS cable, refer to EHS Getting
Started guide that came with your EHS cable or at plantronics.com/accessories for installation
instructions.
Desk Phone (standard)
1 Connect one end of the telephone interface cable to the back of the switcher.
2 Disconnect the handset coil cord from the base of the desk phone and re-connect it to the
telephone interface cable junction box.
3 Connect the remaining end of the telephone interface cable into the open handset port on the
desk phone.
NOTE Your desk phone handset will continue to work; it’s just hooked up differently.
USE
NOTE If your phone has a built-in headset port, you should only use the headset port if you will not
be using the HL10 lifter. In this configuration, you must press both the headset button on your phone
and the call control button on the headset to answer or end calls.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Check Configuration and Make a Test Call
1 If your desk phone has a volume control set it to mid-range.
2 On the bottom of the switcher, ensure the configuration slide switch is set to “A”, the listening
volume dial is set to 3 and the speaking volume dial is set to 2.
3 Remove the handset from desk phone cradle.
4 While wearing your headset, press the desk phone talk button on the MDA200.
5 If you do not hear a dial tone, adjust the configuration switch (A-G) until you do.
6 Dial a test call from the desk phone. If needed, fine tune the volume with the headset volume
controls. You can also adjust the desk phone speaking and listening volumes on the bottom of
the MDA200.
7 End call by pressing the headset call control button and returning the handset to the desk
phone cradle.
For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause hearing
loss. Always listen at moderate levels. For more information on headsets and hearing visit:
plantronics.com/healthandsafety.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE If you will be installing the HL10 lifter and power supply, continue below. If not continue
with Computer: Connect and Call.
Desk Phone Plus HL10 lifter and Power Supply (sold separately)
1 Plug one end of the power supply into the power jack on the back of the MDA200 and the other
end into a working power outlet.
USE
2 Firmly press the handset lifter power cord into the handset lifter jack.
3 While wearing your headset, slide the handset lifter arm under the handset until the lifter base
touches the side of the phone.
4 Slide the lifter up to where it nearly touches the handset earpiece.
5 Press the call control button on your headset to activate the lifter.
6 If you hear a dial tone the lifter is set correctly and needs no adjustment.
7 Remove the protective strips from the 3 mounting tapes on the underside of the lifter.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Gently place the lifter on the desk phone in the pre-determined position.
9 Press firmly to adhere.
If You Do Not Hear a Dial Tone
1 If you do not hear a dial tone, raise the lifter height switch to the next highest position.
2 Repeat steps 3 through 6 above as necessary until you hear a dial tone.
3 When you hear a dial tone, secure the lifter as described in steps 7 though 9.
Additional Parts (If Required)
Use extender arm when the handset lifter needs additional stability lifting and returning
handset to cradle.
Extender Arm
1 Slide extender arm onto lifter.
2 Stabilizers can be shifted left and right. Position stabilizers on outsides of handset to gently
grip the phone.
2
1
2
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Ringer Microphone
Use ringer microphone only when the telephone speaker is not located directly under the
handset.
1 Remove cover from ringer microphone jack on back of lifter.
2 Connect ringer microphone plug.
3 Place ringer microphone over phone speaker. Remove adhesive tape and attach.
3
1
2
For Nortel Phones Only
Desk Phone Plus EHS Cable
1 Connect the end of the EHS cable to the MDA200 and the other end to the desk phone as
described in the EHS Adapter Getting Started guide.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer: Connect and Call
Connect Your Computer and Place a Call
1 Connect the USB cable from the MDA200 to the computer. The computer talk button LED
will be solid green.
2 While wearing headset, dial test call from computer softphone.
3 End call by pressing the computer talk button on the MDA200.
NOTE To use call control feature with a soft phone on the PC you will need to install Plantronics
Control Panel Software. See plantronics.com/software.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
MDA200 LED Indicators
MDA200 LED Buttons
LED
LED State
Indication
Solid green
Connected to PC audio (default condition)
Flashing green
Flashing yellow
Flashing green
Solid green
Incoming PC call
Active PC audio on hold
Incoming desk phone call
Desk phone audio connected
Active phone audio on hold
Flashing yellow
Both icons
flashing green
for 2 seconds
MDA200 is booting up – once complete both LEDs
will be off if no headset is connected. If a headset is
connected the PC icon will remain lit solid green.
Solid red
Firmware update in process – follow firmware
update instructions to clear once complete.
Solid red
Over current condition – using HL10 without power
supply. Unplug MDA200, add power adapter, re-plug
MDA200 to PC.
Flashing red
Headset fault - replace headset and power cycle the
MDA200.
When you press one of the two buttons, you are opening a phone line/audio channel.
Depending on the circumstances, you won’t necessarily hear a dial tone until you’ve dialed from
your phone. The buttons allow you to switch to a different phone line/channel.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily Use
Answer an Incoming Call
The easiest way to answer an incoming call from the desk phone or computer is to press the
flashing LED (desk phone or computer) talk button when you hear an incoming call.
Alternatively, you can answer an incoming call by pressing the headset in-line control button if
the headset is so equipped.
NOTE Remote answer/end capability for the desk phone requires the use of an EHS cable or HL10
lifter. Visit plantronics.com/accessories for more information.
NOTE Remote answer/end capability for the PC is a software feature and dependent on a
compatible softphone. If you do not install the software or don’t have a compatible softphone, you
will need to press the headset call button first. Visit plantronics.com/software for more information.
Place an Outgoing Call
Outgoing desk phone calls
1 Wearing your headset, press the desk phone talk button on the MDA200.
2 Remove the handset from the cradle. You will hear a dial tone.
NOTE This step will be automatic if you install a lifter or EHS cable accessory. For a complete list of
accessories, visit plantronics.com/accessories.
3 Dial the number using your desk phone.
4 To end the call, press the desk phone talk button and hang up the handset.
Outgoing Softphone Calls
The easiest way to make a softphone call is to dial the number on your softphone application
while wearing your headset. You will be automatically connected to your call. End the call by
pressing the computer talk button.
Softphone Compatibility Remote call answer/end from the headset is available for compatible
softphones with no additional steps except when using Skype™. For a list of compatible
softphones visit plantronics.com/software.
For Skype support, please follow these steps:
1 Skype will display the following message during the install of Plantronics Unified Runtime
Engine “PlantronicsURE.exe wants to use Skype”. Choose “Allow Access” to connect.
2 You can also check Skype connection status by going to Skype and checking the Tools >
Options > Advanced > Advanced Settings > ”Manage Other Programs Access” setting.
Switch Calls
To switch from a desk phone call to a computer call (or visa versa) simply press the other call
button to answer incoming call or place an outgoing call. Active audio left on hold is indicated
by a flashing red icon.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Desk Phone
I can’t hear a dial tone in the
headset.
Adjust the configuration switch on the switcher until a dial tone
is heard.
Fine tune the listening volume with the headset volume button.
If the volume is still too low, adjust the listening volume dial on
the switcher.
Make sure the lifter is lifting the handset high enough to operate
the hookswitch; set to a higher setting if necessary.
If you are using a wireless headset, ensure your headset is
subscribed to the USB adapter. See subscription instructions that
came with your wireless headset.
Make sure your headset is charged.
Press the call button on your headset.
I hear static.
If you are using a wireless headset, ensure there is at least 12
inches between the switcher and your computer, and 6 inches
between the switcher and your desk phone. If adjusting the
distance doesn’t help, your headset is going out of range, move
closer to the switcher.
The sound is distorted.
Lower the speaking volume dial and/or listening volume dial on the
switcher. For most telephones the correct setting is position 3.
If your desk phone has a volume control, lower until the distortion
disappears.
If the distortion is still present, adjust the headset volume control
to lower the headset speaker volume. If the distortion persists,
lower the listening volume dial on the switcher.
If you are using a wireless headset, ensure there is at least 12
inches between the switcher and your computer, and 6 inches
between the switcher and your desk phone.
I hear echo in the headset.
Lower the listening volume and speaking volume dials on the
switcher. For most telephones, the correct setting is position 3.
If the audio level is too low in this position, adjust the headset
volume control to increase the headset speaker volume.
If your speaking volume is too low for your listener in this
position, adjust the position of the headset to make sure the
microphone is as close as possible to your mouth.
Adjust the Configuration Switch. The most commonly used
position is “A”, which is the default position.
People I talk to can hear a buzz in
the background.
If you are using a wireless headset, move the switcher further
away from your phone.
If the power supply (HL10 lifter only) is plugged into a power strip,
plug it into the wall directly.
The handset lifter is installed
but does not lift the handset.
Be sure the handset lifter power cord is firmly pushed into the
handset lifter jack on the switcher.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Softphone
When I dial from my softphone
application, nothing happens.
Ensure that the headset is the default sound device. The
Plantronics control panel will launch the sound devices control
panel by going to Plantronics Control Panel > Preferences >
General – Launch Audio Devices Control Panel.
Ensure that you are using a compatible softphone application.
For a list of compatible softphones, visit plantronics.com/
software.
If you are using a wireless headset, ensure your headset is
subscribed to the USB adapter. See subscription instructions that
came with your wireless headset.
Ensure your headset is charged.
Ensure that the Plantronics software is installed. To download,
visit plantronics.com/software.
If the Plantronics software is not installed and you do not have
a compatible softphone, you must first press the headset call
button and then use the softphone interface to place/answer/
end calls.
Restart your computer.
Speaking and/or listening volume is Adjust headset listening volume.
too low or too high.
Adjust listening/speaking volumes in the computer’s sound
control panel/system preferences.
Adjust listening/speaking volumes in the softphone application.
The sound is distorted or I hear an
echo in the headset.
Reduce speaking and/or listening volume on the computer using
your softphone application.
Point microphone towards your chin.
If the distortion is still present, lower the volume on the headset.
No audio connection to PC.
Unplug USB cable from switcher and then reconnect the cable.
Quit and then re-start your PC audio or softphone application.
I can no longer hear any audio
through my PC Speakers.
For Windows XP® systems
• Refer to the “Audio” tab of the “Sounds and Audio Devices”
option in your PC Control Panel.
• Under “Sound Playback”, change the default setting from
Savi Office to your PC speakers. Click “OK” to confirm your
change.
For Windows Vista® and Windows 7® systems
• Refer to the “Sound” option in your PC Control Panel.
• Under the “Playback” tab, change the default setting from
“Speakers Savi Office” to your PC speakers. Click “OK” to
confirm your change.
For Mac OS X
• Choose Apple menu > System Preferences and click
Sound.
• Click Output, and then select “Internal Speakers” or your
speaker choice.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
NEED MORE HELP?
plantronics.com/support
Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States
Plantronics BV
South Point Building C
Scorpius 140
2132 LR Hoofddorp
Netherlands
EEE Yönetmeliğine Uygundur
© 2011 Plantronics, Inc. All rights reserved. Plantronics, the logo design, MDA200, and HL10 are trademarks or registered trademarks of
Plantronics, Inc. Windows, Windows 7, Windows Vista, and Windows XP are registered trademarks of Microsoft Corporation in the US and
other countries. Nortel is a trademark of Nortel Networks. Skype is a registered trademark of Skype Limited. Apple and Mac OS are trademarks
of Apple Computer, Inc. registered in the US and other countries. All other trademarks are property of their respective owners.
Patents: U.S. 7,633,963
86289-06 (10.11)
Download from Www.Somanuals.com. All Manuals Search And Download.
|