IX2850
LED LCD Monitor
USER'S GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Content
Safety Precautions...........................................................................................................................................................3
Technical Information................................................................................................................................................. 21
Wall-Mount Installation Instructions..................................................................................................................... 22
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Instructions
Thank you for purchasing the IX2850 LED LCD monitor. Please read this guide thoroughly before
installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This
has been tested and found compliant with the limits for a Class B digital
LED LCD Monitor
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper
protection against harmful interference to a residential installation. This
LED LCD Monitor
generates, uses, and can radiate radio frequency energy. Harmful interference to radio
communication may be the result if it‘s not properly installed and used. However, there is no
guarantee that interference will not occur in a particular installation. If this
LED LCD Monitor
does cause serious interference to radio or television reception, resetting may correct it.
Moreover, users are encouraged to reduce interference by doing one or more of the following:
ꢀReorient or relocate the receiving antenna.
ꢀMove the
and the receiver further away from each other.
LED LCD Monitor
ꢀConnect the
into an outlet on a circuit different from that to which the
LED LCD Monitor
receiver is connected.
ꢀConsult your local dealer or a qualified technician.
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized
changes or modifications to this
device.
would void the user‘s authority to operate this
LED LCD Monitor
Note: If necessary, shielded interface cables and AC power cord must be used to meet the
emission level limits.
According to WEEE regulation, this LED LCD Monitor can't be handled as normal trash in Europe when it is
out of usage. Please refer to the recycle information on Planar’s website to handle it.
For more information on how to recycle your product, please visit http://www.planar.com/about/green/
1
Download from Www.Somanuals.com. All Manuals Search And Download.
COMMUNIQUE D’AVERTISSEMENT DE LA FCC CONCERNANT LES INTERFERENCE DE
FREQUENCE RADIO: (SEULEMENT POUR MODELES CERTIFIE PAR LA FCC)
Ce moniteur a été testé et à été trouvé conforme aux limites pour un appareil numérique de
Classe B, suivant la partie 15 des règlements de la FCC. Ces limites ont été développées pour
offrir une protection satisfaisante contre les interférences nuisibles dans une installation
résidentielle. Ce moniteur génère, utilise et peut radier de l’énergie de fréquence radio. Ceci
peut causer des interférences nuisibles à des communication radio si l’appareil n’est pas
convenablement installé et utilisé. Il n’y à néanmoins aucune garantie que des interférences
n’apparaîtront pas dans une installation particulière. Si ce moniteur cause de sérieuses
interférences à la réception de signaux radios ou télévisées, une possibilité est de réinitialiser le
moniteur. Les usagers sont aussi encouragés à corriger les interférences en appliquant une ou
plusieurs des démarches suivantes:
ꢀ Réorientez ou déplacez l’antenne de réception.
ꢀ Placez le moniteur et le récepteur plus loin l’un de l’autre.
ꢀ Connectez le moniteur à une prise différente de celle à laquelle le récepteur est connecté.
ꢀ Consultez votre revendeur local ou un technicien qualifié.
Avertissement de la FCC:
Pour assurez une conformité continue au règlements de la FCC, l’utilisateur doit utiliser un
cordon d’alimentation mis à terre et le câble d’interface vidéo protégé avec noyaux en ferrite,
fourni avec l’appareil. Chaque modification ou changement non-autorisé appliqué à ce moniteur
peut faire perdre à l’utilisateur sont droit d’opération de cet appareil.
Note: Si nécessaire, des câbles d’interface protégés et un cordon d’alimentation alternante
doivent être utilisé pour être conforme aux limites d’émission.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpacking Instructions
ꢀ
Remove the LED LCD Monitor out of the package and take off the plastic bag and Polystyrene
Foam.
ꢀ
ꢀ
Remove base from plastic bag and attach to base.
Adjust the display between -5° and 20°.
Safety Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s manual to
maximize the life of your unit.
Do:
ꢀTurn off the product before cleaning.
ꢀSurface may be cleaned using a soft clean cloth moistened with mild window glass
commercial cleaners or 50/50 mixture of water and isopropyl alcohol.
ꢀUse a soft cloth moistened with mild detergent to clean the display housing.
ꢀDisconnect the power plug from AC outlet if the product is not going to be used for an
extended period of time.
Don’t:
ꢀDo not touch the LED display screen surface with sharp or hard objects.
ꢀDo not use abrasive cleaners, waxes or solvents for your cleaning.
ꢀDo not operate the product under the following conditions:
o
o
o
o
Extremely hot, cold or humid environment.
Areas susceptible to excessive dust and dirt.
Near any appliance generating a strong magnetic field.
In direct sunlight.
ꢀIf smoke, abnormal noise or odor emits from your LED LCD Monitor, remove the power cord
immediately and call your service center.
ꢀNever remove the rear cover of your LED LCD Monitor. The display unit inside contains
high-voltage parts and may cause electric shock.
ꢀ
LED LCD Monitor
Never try to repair your yourself. Always call your service center or a
qualified technician to fix it.
ꢀ
Due to safety concerns, if the VESA mounting kit is purchased separately, please
make sure the mounting kit is UL-listed, and replaceable only by service personnel.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Consignes de sécurité
Respectez tous les avertissements, les précautions et conseils d’entretien recommandés dans ce
manuel de l’utilisateur pour maximiser la durée de vie de votre appareil.
A faire :
ꢀÉteindre le produit avant de le nettoyer.
ꢀLa surface de l'écran tactile peut être nettoyée avec un chiffon doux et propre imprégné d’un
nettoyant doux du commerce pour vitres ou d'un mélange à 50/50 d'alcool isopropylique et
d'eau.
ꢀUtilisez un chiffon doux imprégné d'un détergeant doux pour nettoyer le carter de l'affichage.
ꢀDébranchez la fiche d’alimentation de la prise de courant secteur si le produit ne doit pas être
utilisé pendant une période prolongée.
A ne pas faire :
ꢀNe touchez pas la surface de l’écran LED avec des objets coupants ou durs.
ꢀN'utilisez pas des produits de nettoyage abrasifs, de la cire ou des solvants pour le nettoyage.
ꢀN’utilisez pas le produit dans les conditions suivantes :
o
o
o
o
Environnement extrêmement chaud, froid ou humide.
Endroits poussiéreux ou sales.
Près d’appareils générant un fort champ magnétique.
Sous la lumière directe du soleil.
Si de la fumée, un bruit anormal ou une odeur s'échappait de votre moniteur LCD LED,
débranchez immédiatement le cordon d'alimentation et appelez votre centre de réparation.
Ne retirez jamais le couvercle arrière de votre moniteur LCD LED. L’unité d’affichage contient
des éléments où circule un voltage élevé et présentant un risque d'électrocution.
ꢀ
ꢀ
ꢀN’essayez jamais de réparer vous-même votre moniteur LCD LED. Faites toujours appel à votre
centre de service ou à un technicien qualifié pour toute réparation.
ꢀPour des raisons de sécurité, si vous achetez séparément le kit de fixation VESA,
assurez-vous que celui-ci est certifié UL, et qu’il peut être remplacé uniquement par
un technicien qualifié.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
First Setup
Install the stand base
LED LCD Monitor
1. Lay the
flat on a table with the LED screen face down. To prevent the monitor
from being scratched, put a piece of soft cloth on the table on which the screen will be set.
2. Unpack the base, one hand hold the monitor, the other hand attach the base to the stand.
LED LCD Monitor
3. Stand the
up.
Disconnecting the stand base
LED LCD Monitor
LED LED
screen face down. To prevent the
1. Lay the
flat on a table with the
from being scratched, put a piece of soft cloth on the table on which the screen
LCD Monitor
will be set.
2. Hold the monitor down with one hand. With the other hand, use two fingers to press the
hooks down as directed below.
3. Remove the base from the stand.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Front View of the Product
①②③④ ⑤⑥
OSD Turn On/ Off
①
②
③
④
⑤
⑥
Scroll Down/ Adjust Decrease/ Audio/ Preset *
Scroll UP/ Adjust Increase/ PIP (PBP)/Swap *
Input select/ Confirm Selection/ Auto *
Power On/ Off
LED Indicator
* Hot keys Instructions please see“Using the OSD Menu”on page 10.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear View of the Product
①
②
③ ④ ⑤ ⑥ ⑦ ⑧
⑨ ⑩ ⑪
Power Input
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
DVI Input (DVI 24 pin)
HDMI-2 input (HDMI 19 pin)
HDMI-1 input (HDMI 19 pin)
DisplayPort-2 Input (DisplayPort 20 pin)
DisplayPort-1 Input (DisplayPort 20 pin)
VGA Input (D-Sub 15 pin)
Up-stream USB port (to PC)
USB port x 2 (support USB 3.0 plug play device)
Audio Input
Headphone Jack
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Installation
Connect either VGA, DVI, HDMI or DisplayPort Video Source from the monitor to the
computer. Make sure both monitor and computer are powered OFF. Please note. The
monitor ships with DisplayPort and HDMI cables only. DVI-dual link, or VGA cable may be
sourced separately from a cable supplier.
1.
2. Connect the audio cable from audio output of computer to the audio input of the monitor.
3. Connect the earphone to the earphone output terminal of the monitor. (Earphone sold
separately).
4. To enable the USB 3.0 Hub, connect the USB 3.0 cable from the computer to the monitor.
5. Connect power cord to a properly grounded AC outlet, and then to the monitor.
6. Power-ON computer and then POWER-ON the monitor.
7. Set the timing mode on your computer. Recommended resolution and refresh rate is
3840 x 2160 @ 60Hz for DisplayPort and 3840 x 2160 @ 30 Hz for HDMI.
Figure:
Earphone
(not supplied)
PC
Audio cable
(not supplied)
USB 3.0 cable
Power cable
DVI cable
DisplayPort cable
HDMI cable
VGA cable
(not supplied)
(not supplied)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation and Calibration/Reset Instructions
Before using the LED LCD Monitor:
ꢀ Connect external equipment properly.
ꢀ Insert the power plug, and the power LED indicator will light orange.
Power On/Off
To turn the LED LCD Monitor on/off:
Press
button on the front. The power LED indicator light will be blue when the LED LCD
Monitor is on.
Using the OSD Menu
Use OSD menus to adjust settings by using the menu button on the front of the LED LCD
Monitor.
Displays main menu
1
Exits from OSD menu
Selects between DisplayPort1, DisplayPort2, HDMI1, HDMI2, DVI, or VGA mode
2
Press 3 seconds activates Auto Image Adjust (VGA only)
Select the desired item when in OSD menu
▼
When not in OSD menu, holding for 1 second directly enters Audio menu
When holding for 3 seconds directly enters Color Preset Modes
Select the desired item when in OSD menu
▲
When not in OSD menu, holding for 1 second directly enters PIP/PBP menu
When holding for 3 seconds directly swaps PIP/2PBP images only
Recalls both Contrast and Brightness (when not in OSD menu)
▼ + ▲
OSD Lock Out Function
When LED LCD Monitor is in normal mode, the “OSD Lock Out” function can be enabled.
Option 1: OSD lock – all 4 buttons are locked except the “POWER” button.
Press and hold the 1 button and the ▲ button for 3 seconds to lock the OSD buttons.
The LED LCD Monitor will show an “OSD Locked” message for 3 seconds and the message will
disappear automatically.
Repeat this step to unlock.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked.
Press and hold the 1 button and the ▼ button for 3 seconds to lock all 5 buttons.
The LED LCD Monitor will show a “Power Button Locked” message for 3 seconds and the
message will disappear automatically.
Repeat this step to unlock.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Operation—OSD Menu
You can use the OSD menu to adjust various settings for your LED LCD Monitor.
Press the 1 button to display the OSD Menu, and use ▲ or ▼ to select the desired OSD menu.
Press 2 to confirm or reach the next sub-menu. To exit press 1.
Short Cuts Function from the button(s)
Input: When Input Select is pressed, change Input signal to DisplayPort1, DisplayPort 2, HDMI1,
HDMI2, DVI, or VGA.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture: To manually adjust the Picture Format, Contrast, Brightness, Sharpness, Over Drive and
ECO Mode of screen image.
• Picture Format: To select the video mode from 16:9, 4:3 or 1:1.
• Contrast: To adjust the foreground white level of screen image.
▲: increase contrast, ▼: decrease contrast.
• Brightness: To adjust the luminance of the video.
▲: increase brightness, ▼: decrease brightness.
• Sharpness: To adjust the clarity of a non-UHD Resolution (3840x1620) signal with ▲ or ▼
button.
• Over Drive: Allows the user to change the Over Drive strength to improve the quality of
motion pictures.
Press ▲ or ▼ key to adjust the Over Drive strength in three levels.
• ECO Mode: Allows the user to change the energy-saving settings. Contrast and Brightness
adjustment will be disabled when ECO is active.
Press ▲ or ▼ key to adjust the ECO Mode in three levels.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
PiP/PbP: PiP/PbP button allows you to watch two screens from different sources at the same
time. (PiP is picture in picture; PbP is picture by picture)
• PiP/PbP Mode: Toggle to enable/disable PiP/PbP function.
• Main Input: Identifies main source (greyed out)
• Sub Win1 Input: To select input source for sub-screen.
• Sub Win2 Input: To select input source for sub-screen.
• Sub Win3 Input: To select input source for sub-screen.
• PiP Size: To adjust sub-screen window size.
Small (720 x 480)
Middle (1280 x 720)
Large (1920 x 1080)
• PiP Position: To adjust sub-screen window position.
Top-Right Top-Left
Bottom-Right
Bottom-Left
• Swap: Switch between main screen and sub-screen (only for PiP and 2PbP)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
In PbP Mode
2PbP.
Splits the screen left and right equally. In order to achieve full screen on each side,
recommended resolution is 1920 x 2160; however, this is a custom resolution. Check your video
card to see if custom resolution is supported. If not supported, black bars on top and bottom will
result.
3PbP.
Splits the screen. Left-hand side shows only one input.
Right-hand side shows two inputs.
4PbP.
Splits the screen into four equal quadrants.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Adjust: To adjust the audio functions.
• Volume: To adjust the volume of speaker output.
• Mute: To turn the Mute ON/OFF.
• Audio Source: Default is main source, but can be manually switched in PiP and PbP mode.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Color: To select the color for improving brightness and color saturation between Warm, Normal,
Cool, User Define, Preset Mode, and Blue Light Reducer.
• Warm: Adds green to screen image for a darker color.
• Normal: Adds red to screen image for warmer white and richer red.
• Cool: Adds blue to screen image for cooler white.
• User Define: Individual adjustments for red (R), green (G), blue (B).
• Preset Mode: Provides an optimum display environment depending on the content displayed.
It contains 5 user-selectable presets. (Picture Mode adjustment will be disabled when Preset is
active.)
-Standard is for general windows environment and monitor default setting.
-Game optimized for PC game environment.
-Cinema optimized for movie and video environment.
-Scenery optimized for displaying outdoor scenery images.
-Text optimized for text editing and viewing in a word processing environment.
• Blue Light Reducer: Decrease the blue light emitted from the display to reduce the risk of blue
light exposure to your eyes. (Picture Mode adjustment will be disabled when Blue Light
Reducer is active.)
Press ▲ or ▼ key to adjust the Blue Light Reducer strength in three levels.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Language: Allows user to choose from available languages.
OSD Settings: To manually adjust the Horizontal and Vertical OSD position, Transparency and
OSD Time Out.
• Horizontal: To horizontally adjust the OSD position.
• Vertical: To vertically adjust the OSD position.
• Transparency: To change the transparency of OSD window.
• OSD Time Out: To automatically turn off On Screen Display (OSD) after a preset period of time.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu: To set up Auto, H./ V. Position, Phase, Clock, DisplayPort, Reset and Information.
• Auto: To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size)
of the screen.
• H. Position: To adjust the horizontal position of the screen.
• V. Position: To adjust the vertical position of the screen.
• Phase: To adjust delay time of phase in order to reduce the noise of picture.
• Clock: To adjust clock frequency in order to get optimized horizontal size.
• DisplayPort: To adjust the DisplayPort version.
• Reset: To recall factory settings for Video & Audio controls.
• Information: To display the information, regarding the current input signal coming from the
graphic card in your computer.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Supporting Timing Modes
STANDARD
VGA
RESOLUTION
STANDARD
VESA
RESOLUTION
720 x 400 @ 70Hz
1280 x 1024 @ 75Hz
VGA
MAC
VESA
VESA
VESA
VESA
VESA
640 x 480 @ 60Hz
640 x 480 @ 67Hz
640 x 480 @ 72Hz
640 x 480 @ 75Hz
800 x 600 @ 56Hz
800 x 600 @ 60Hz
800 x 600 @ 72Hz
VESA
VESA
VESA
VESA
VESA
VESA
VESA
1440 x 900 @ 60Hz
1440 x 900 @ 75Hz
1600 x 900 @ 60RB
1680 x 1050 @ 60Hz
1920 x 1080 @ 60Hz
1920 x 1200 @ 60Hz
2048 x 1152 @ 60Hz
VESA
VESA
MAC
VESA
VESA
VESA
MAC
VESA
800 x 600 @ 75Hz
832 x 624 @ 75Hz
1024 x 768 @ 60Hz
1024 x 768 @ 70Hz
1024 x 768 @ 75Hz
1152 x 870 @ 75Hz
1280 x 720 @ 60Hz
1920 x 1440 @ 60Hz
2560 x 1440 @ 60Hz
2560 x 1600 @ 60RB
2880 x 1620 @ 60RB
3840 x 2160 @ 24Hz
3840 x 2160 @ 25Hz
only DVI (dual link)/ HDMI/ DP
VESA
only DVI (dual link)/ HDMI/ DP
CVT
only DVI (dual link)/ HDMI/ DP
CVT
only DVI (dual link)/ HDMI/ DP
CVT
only DVI (dual link)/ HDMI/ DP
CVT
only DVI (dual link)/ HDMI/ DP
CVT
only DVI (dual link)/ HDMI/ DP
3840 x 2160 @ 30Hz
3840 x 2160 @ 60Hz
CVT (only DP)
CVT
1280 x 800 @ 60Hz
1280 x 1024 @ 60Hz
VESA
Note:
DVI, HDMI and DisplayPort supports 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2160p.
For 2PbP and 3PbP, set your computer to a non-VESA standard timing of 1920 x 2160.
Warning: Do not set the graphic card in your computer to exceed these maximum refresh rates.
Doing so may result in permanent damage to your LED LCD Monitor.
Avertissement : Ne réglez pas la carte graphique de votre ordinateur en dépassant ces taux de
rafraîchissement maximaux. Si vous le faites, cela va irrémédiablement détériorer votre moniteur.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Information
Panel
28” TFT (with LED backlight)
Power Management
On: 45 Watts (typical), 75 Watts (maximum)
Standby Mode: < 1.2 Watt (USB 3.0)
Off: < 0.5 Watt
Displayable Resolution
UHD 3840 x 2160 max. Vertical Frequency 60Hz max.
Compatibility
PC
VGA Support up to 2048 x 1152
HDMI/ DVI-D Support up to 3840 X 2160 @ 30Hz
DP support up to 3840 x 2160 @ 60Hz (non-interlaced)
Pixel Dimension
Display Color
Tilt
0.16 x 0.16 mm
1.07 billion
-5°~20°
Active Display Area
Temperature
648.9 mm x 369.3 mm
Operating: 0°C ~ +40°C
Storage: -20°C ~ + 60°C
Compliance
Power
FCC-B, CE, UL/cUL
Input Voltage AC100-240 V
Audio Output
3W x 2
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Wall-Mount Installation Instructions
Preparing to Install the Optional Wall Mount Arm (not included)
This LED LCD Monitor can be attached to a wall mounting arm
purchased separately.
Turn the power OFF then disconnect the cables from the LED
LCD Monitor before performing the procedure below.
1. Lay the LED LCD Monitor face down on a soft surface.
2. Remove the 4 screws holding the stand to the hinge.
3. Remove the stand.
100mm x 100mm Screw
Mounting Options
Attaching The Optional Wall Mount Arm (not supplied)
Follow these steps to finish installing the wall mounting arm:
1. Place the wall mounting arm onto the back of the LED LCD
Monitor. Line up the holes of the arm with the holes in the
back of the monitor.
2. Insert the 4 screws into the holes and tighten.
3. Reconnect the cables. Refer to the User’s Guide that came
with the optional wall mounting arm for instructions on
attaching it to the wall.
4mm, 0.7 pitch
threaded holes x 4
NOTE
•
100mmx100mm VESA high hole (n=4), M4, pitch =0.7
mm screw mounting kit not included.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
No power
ꢀ
Make sure A/C power cord is securely connected to the power adapter and the power supply
LED LCD Monitor
is firmly connected to the
.
ꢀ
Plug another electrical device into the power outlet to verify that the outlet is supplying
proper voltage.
ꢀMake sure all signal cables are installed.
Power on but no screen image
ꢀ
LED LCD Monitor
Make sure the video cable supplied with the is tightly secured to the video
output port on back of the computer. If not, tightly secure it.
ꢀAdjust brightness.
Wrong or abnormal colors
ꢀ
If any colors (red, green, blue) are missing, check the video cable to make sure it is securely
connected. Loose or broken pins in the cable connector could cause an improper connection.
LED LCD Monitor
ꢀConnect the
to another computer.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Planar Support
Cables and Accessories
To find cables and accessories for your Planar monitor, touch screen or other Planar products
Technical Support
warranty information and access to Planar's Technical Library for online trouble shooting.
To speak with Planar Customer Support please have your model and serial number available
and dial:
Planar Support
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.
Hours: 24 hours a day, 7 days a week.
Toll or long distance charges may apply.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
|