QUICK LINKS
Contents
Index
Regulatory Compliance
Product Information
Warranty
Invitium Battery System
GETTING STARTED
Model BAT-24CM
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
OPERATIONS MANUAL
Planar Systems, Inc.
USING THE BATTERY
Charge Battery
Set Up Power Management
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
APPENDIXES
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Planar Systems, Inc. © 2004. All rights reserved.
QUICK LINKS
Information in this document has been carefully checked for accuracy; however, no guarantee is
given to the correctness of the contents. This document is subject to change without notice. Planar
provides this information as reference only. Reference to other vendors’ product does not imply
any recommendation or endorsement.
Contents
America Sales
Planar Systems, Inc.
1195 NW Compton Drive
Beaverton, OR 97006-1992 USA
(503) 748-1100 phone
(503) 748-1493 fax
Index
Regulatory Compliance
Product Information
Warranty
This document contains proprietary information protected by copyright. No part of this manual
may be reproduced by any mechanical, electronic, or other means, in any form, without prior
written permission of the manufacturer.
Medical Sales
Planar Systems, Inc.
400 Fifth Avenue
Waltham, MA 02451-8738 USA
(781) 895-1155 phone
(781) 895-1133 fax
Planar is a registered trademark and Invitium a trademark of Planar Systems, Inc.
All other trademarks are the property of their respective owners.
GETTING STARTED
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
Europe & Asia-Pacific Sales
Planar Systems, Inc.
Olarinluoma 9, P. O. Box 46
FIN-02201 Espoo, Finland
+ 358 9 420 01 phone
USING THE BATTERY
+ 358 9 420 0200 fax
Charge Battery
Set Up Power Management
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
DOCUMENT HISTORY
APPENDIXES
March 2004
020-0332-00 Rev. A
Specifications
Invitium Battery System BAT-24CM
Download from Www.Somanuals.com. All Manuals Search And Download.
ii
QUICK LINKS
Contents
Contents
Index
Product Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Regulatory Compliance
Product Information
Warranty
About the Invitium Battery System . . . . . . . . . . . . . . . . . . . . . . .1
Locate the Battery Housing. . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Identify the Connector Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Install the Battery Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Charge the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Set Up the Power Management System. . . . . . . . . . . . . . . . . . . .7
Replace the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Battery Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Battery System Specification. . . . . . . . . . . . . . . . . . . . . . . . . . .16
Description of Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
GETTING STARTED
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
USING THE BATTERY
Charge Battery
Set Up Power Management
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
APPENDIXES
Specifications
Invitium Battery System BAT-24CM
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
QUICK LINKS
Product Information
Contents
Warning
Index
Safety guidelines
• Equipment is not suitable for use
in the presence of a flammable
anesthetic mixture with air,
oxygen, or nitrous oxide.
product quality and safety for the user. To maintain both quality and safety,
follow the guidelines and instructions in this manual.
Regulatory Compliance
Product Information
Warranty
• Use the battery system only as intended.
• The Invitium battery system
may be energized or operational
even when disconnected from
the AC power source.
• Do not place the battery system near a window. Exposing the system to rain,
water, moisture or constant direct sunlight can severely damage it.
GETTING STARTED
About the Battery System
• Refer all servicing to qualified personnel to maintain your warranty.
The battery system has no internal user-serviceable parts.
• If the Invitium battery system has
been exposed to liquid, has been
dropped, or if its base has been
damaged, it may pose a shock or
fire hazard. Immediately unplug it
and contact customer service for
assistance.
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
• Do not cover or obstruct any venting holes on the battery system.
• Store the battery system within –20 to +65 degrees Celsius. Storing the system
outside that temperature range could result in permanent damage.
•
If any cord or cable is frayed or damaged, replace it immediately with another of
the same type and rating as supplied by Planar. The safety and regulatory listing and
certifications are based on cables supplied by Planar.
USING THE BATTERY
• Use care in handling the battery if
any leakage is observed. Avoid
skin contact and wash any areas
that come in contact with this
material immediately.
Charge Battery
• Use and maintain the safety ground plug set (power cord) included with the unit.
Set Up Power Management
• After battery system installation, secure all electrical cords to prevent
accidental damage.
MAINTAINING THE BATTERY
Replace Battery
• To clean the exterior chassis of the battery system, follow the UL 2601 standard for
• Plug the battery system only into
a grounded power outlet.
use in a hospital environment. See cleaning guidelines for more information.
Troubleshooting
APPENDIXES
• Be careful when moving the battery system to a different location.
Use original packaging whenever possible.
Specifications
Invitium Battery System BAT-24CM
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning guidelines
QUICK LINKS
Contents
The Invitium battery system continues to operate normally while being cleaned in
a fashion normal for a hospital environment. Use a damp, mildly soapy cloth to clean
the exterior chassis. Drip protection is provided in accordance with the IPX1 rating,
defined in the IEC/EN60529 standard.
Index
Regulatory Compliance
Product Information
Warranty
Service support
Other than battery installation and replacement, the Invitium battery system requires no
routine maintenance. Should your battery system require repair, return the unit to Planar
Systems for servicing to maintain product warranty. See the warranty for more information.
GETTING STARTED
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install BatteryFuses
USING THE BATTERY
Charge Battery
Set Up Power Management
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
APPENDIXES
Specifications
Invitium Battery System BAT-24CM
v
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK LINKS
Locate the Battery Housing
Contents
In operation
The Invitium battery system ships already installed on the Invitium cart. The power
cord, USB cable, and output power cable are connected, and the output power fuse
is installed. You need to install the two battery fuses before operation.
Check that all cords and cables are
securely connected before you turn
on the Invitium workstation.
Index
Regulatory Compliance
Product Information
Warranty
Do not block the vent holes on
the battery housing.
GETTING STARTED
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
USING THE BATTERY
Charge Battery
Set Up Power Management
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
APPENDIXES
Specifications
Invitium Battery System BAT-24CM
2
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK LINKS
Identify the Connector Ports
All external connections to the battery system are located on the rear of the battery
enclosure. The design of the enclosure minimizes liquid ingress.
Contents
Legend
Index
1 Standard IEC 120–250V AC
input power
2 A, 250 V replaceable
Regulatory Compliance
Product Information
Warranty
2 USB serial port
Communication channel
between the power supply and
its host computer
GETTING STARTED
3 12V DC 6 A output power
Mini-DIN 4-pin device; requires
an external power cable
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
4 Output power fuse
6 A replaceable
1
3
5
2
4
5 Battery fuse
6 A replaceable
USING THE BATTERY
Charge Battery
Set Up Power Management
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
APPENDIXES
Specifications
Invitium Battery System BAT-24CM
3
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK LINKS
Install the Battery Fuses
You need the two battery fuses and a screwdriver for this installation.
Contents
About the battery fuses
The Invitium battery system requires
two 6 A fuses. These are available
from any hardware store.
Index
To install a battery fuse
Regulatory Compliance
Product Information
Warranty
1 Push the fuse in until you feel the connection.
Securing the fuse connection
Use the screwdriver to turn the fuse
holder approximately a quarter to
the right, or until you feel it lock.
GETTING STARTED
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
USING THE BATTERY
2 Use a screwdriver to secure the connection.
Charge Battery
Set Up Power Management
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
APPENDIXES
Specifications
Invitium Battery System BAT-24CM
4
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK LINKS
Charge the Battery
Contents
This section provides basic information on battery operations. See specifications on
battery charging, charging controller board, and power consumption efficiency for
more information.
Index
Regulatory Compliance
Product Information
Warranty
Battery charging
Plug the battery system into an AC power source for charging.
Charge time
GETTING STARTED
About the Battery System
The charging controller board is capable of independently charging the batteries
while powering the attached system. This ensures that the charge rate of the
batteries is the same whether a load is connected or not. Charge time varies
depending on the age and usage of the battery. Typically, as a battery ages, it
tends to accept less charge; that is, the charge time decreases. Consequently,
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
USING THE BATTERY
Charge Time
Capacity of Charge
Charge Battery
3 hours
4 hours
6 hours
80%
90%
Set Up Power Management
MAINTAINING THE BATTERY
100%
Replace Battery
Troubleshooting
capacity of the battery is maintained. The charger enters the trickle charging cycle
after the current supplied to the batteries drops below .5 amps. Charge the batteries
for 10 hours for every eight charges to 100%.
APPENDIXES
Specifications
Invitium Battery System BAT-24CM
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery discharging
QUICK LINKS
Contents
You discharge the battery by (1) disconnecting the battery system from the
AC power source and (2) powering the load.
Index
When the battery has been discharged for a long period of time, it reaches a point
at which it needs to cut off power to its load. The battery system communicates to
the host computer and requests a safe shutdown or hibernation.
Regulatory Compliance
Product Information
Warranty
Thermal protection
The universal power supply is thermally protected and self-resetting. The battery
enclosure contains a cooling fan that is activated whenever the system is plugged
into an AC power source.
GETTING STARTED
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
Depth of discharge protection
After the power to the load is cutoff, the internal circuitry goes into sleep mode to
prevent further battery discharging. The sleep mode is intended to prevent the
batteries from deep discharge.
USING THE BATTERY
Charge Battery
Set Up Power Management
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
APPENDIXES
Specifications
Invitium Battery System BAT-24CM
6
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK LINKS
Set Up the Power Management System
All communications occur through the USB serial interface. These are displayed
through the Windows Power Options Properties dialog box on the host computer.
Contents
Easier power management
Index
Unlike earlier Invitium battery
systems, this system has no charge
indicator panel.
To set up power management
Regulatory Compliance
Product Information
Warranty
1 Open the Control Panel and click the Power Options tool.
The charge level indicator is
software-driven, complying with
the Microsoft Windows HID Power
Device Specification.
GETTING STARTED
You manage power consumption
using the Power Options tool in
the Windows Control Panel.
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
USING THE BATTERY
Charge Battery
Set Up Power Management
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
APPENDIXES
Specifications
Invitium Battery System BAT-24CM
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Click the Alarms tab on the Power Options Properties dialog box.
QUICK LINKS
Contents
Low battery alarm
Index
User-selectable alarm that is audible
or silent. The alarm is triggered when
the battery charge level reaches its
low battery limit.
Regulatory Compliance
Product Information
Warranty
Critical battery alarm
User-selectable alarm that is audible
or silent. The alarm is triggered when
the battery charge level reaches its
depth of discharge limit.
GETTING STARTED
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
Hibernation/shut down action
If a hibernation or shut down action
is enabled, the low or critical battery
alarm limit should not be greater
than 5% to ensure proper operation.
USING THE BATTERY
Alarm disabled
Charge Battery
Deselect the check box to disable
the low battery or critical battery
alarm.
3
To set either the low battery alarm or critical battery alarm, or both alarms:
• Click the check box to activate alarm mode.
Set Up Power Management
MAINTAINING THE BATTERY
• Move the slider to the point at which you want the alarm to trigger.
Replace Battery
• Click the Alarm Action button to do one or more of the following: select
Troubleshooting
APPENDIXES
Specifications
Invitium Battery System BAT-24CM
Download from Www.Somanuals.com. All Manuals Search And Download.
8
4 Select the notification you want, one of the two types or both. Click OK.
QUICK LINKS
Contents
Alarm action
Index
An alarm action to hibernate or shut
down can be selected in the Power
Options Properties menu.
Regulatory Compliance
Product Information
Warranty
Alarm notification
You must select a notification for
the alarm you choose. Selecting an
alarm action or running a program
is optional.
GETTING STARTED
About the Battery System
To set an alarm action:
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
1
Click the check box to activate
the option.
2
Select an action from the
pull-down list.
USING THE BATTERY
To run a program:
Charge Battery
1
Click the check box to activate
the option.
Set Up Power Management
2
Click the Configure program
button to enter your code.
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
APPENDIXES
Specifications
Invitium Battery System BAT-24CM
9
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Open the Power Meter tab to check the power status of each battery.
• Click the check box to see the details on a battery.
• Click a battery icon for more information.
QUICK LINKS
Contents
Index
Regulatory Compliance
Product Information
Warranty
GETTING STARTED
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
USING THE BATTERY
Charge Battery
Set Up Power Management
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
APPENDIXES
Specifications
Invitium Battery System BAT-24CM
10
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK LINKS
Replace the Battery
To remove the battery system from the cart
Contents
Replacement tips
The Invitium battery system weighs
25 pounds. Handle it carefully.
Index
1 Loosen the two screws on the front of the cart.
Regulatory Compliance
Product Information
Warranty
2 Loosen the screw on the back, and tuck the cables to the side.
The unit is heavily weighted
toward the front of the cart. As
you remove it from the cart, you
feel its heaviness.
Once the unit is completely out of
the housing, move it to a flat and
stable work surface to replace the
batteries.
GETTING STARTED
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
Do not mix old and new batteries.
Replace both batteries during the
same maintenance session.
The battery system is a self-aligning
unit. When you return it to the cart,
push it all the way in. The alignment
occurs automatically.
3 Unplug the power cord, USB cable, and output power cable.
USING THE BATTERY
4 Remove the two battery fuses.
Charge Battery
5 Pull out the battery enclosure carefully and move it to a flat and stable work
Set Up Power Management
surface. The unit is heavily weighted toward the front.
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
APPENDIXES
Specifications
Invitium Battery System BAT-24CM
11
Download from Www.Somanuals.com. All Manuals Search And Download.
To replace the battery
QUICK LINKS
Contents
1 Loosen the two screws and remove the retaining bracket.
Replacement tips
Use only Yuasa NP 12-12 or
B&B EP 12-12 batteries.
Index
Regulatory Compliance
Product Information
Warranty
GETTING STARTED
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
2 Detach the four battery terminal cable connectors and move them to the side.
USING THE BATTERY
Charge Battery
Set Up Power Management
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
4 Reconnect the four terminal cable connectors. Push in the connector until you
APPENDIXES
feel the connection click.
5 Reattach the retaining bracket with the two screws.
Specifications
Invitium Battery System BAT-24CM
12
Download from Www.Somanuals.com. All Manuals Search And Download.
To reinstall the battery system into the cart
QUICK LINKS
Contents
1 Push the battery system all the way into the housing area.
2 Plug in the power cord, USB cable, and power output cable.
Index
Regulatory Compliance
Product Information
Warranty
GETTING STARTED
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
3 Reinsert the two battery fuses.
4 Reinsert the three screws, one in the back and two in the front.
USING THE BATTERY
Charge Battery
Set Up Power Management
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
APPENDIXES
Specifications
Invitium Battery System BAT-24CM
13
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK LINKS
Troubleshooting
Contents
Index
Problem
Possible Cause
Possible Solution
Regulatory Compliance
Product Information
Warranty
The battery system not functioning,
no output power, does not charge
when connected to AC power.
AC power is not connected.
Make sure power cord is connected properly
Input fuse needs to be replaced.
Replace fuse in input connector. Replace
with UL recognized fuse 2 A, 250 VAC,
fast acting, size 5 mm x 20 mm.
GETTING STARTED
Over-temperature protection is activated.
Output power cord not connected properly.
Contact Planar.
About the Battery System
No power supplied to Invitium system.
Make sure that output power cord is
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
connected correctly. When the power LED
on the right side of the Invitium workstation
is green, it indicates normal operating mode.
Power switch is off.
Turn on the power switch, located on
the right side of the Invitium workstation.
USING THE BATTERY
Output fuse needs to be replaced.
Replace the output power fuse located next
to output power connector. Replace with
UL recognized fuse 6 A, 125 VDC, fast acting,
size.25 in. x 1.25 in.
Charge Battery
Set Up Power Management
MAINTAINING THE BATTERY
Batteries not connected correctly.
Battery not completely charged.
Check battery connections.
Replace Battery
System run time is too short.
Connect AC power and let battery charge
completely. Charge status is conveyed
through the Power Meter tab on the
Power Options Properties dialog box.
Troubleshooting
APPENDIXES
Battery capacity is low.
Replace battery.
Specifications
Invitium Battery System BAT-24CM
14
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK LINKS
Battery Disposal
Contents
Industrial batteries contain lead and sulfuric acid, which are both considered
“hazardous substances.” If batteries are improperly disposed of, for example, thrown
in the trash or illegally dumped, these substances can eventually leak out and
contaminate the surrounding soil and groundwater supply.
Index
Regulatory Compliance
Product Information
Warranty
It is a federal law to properly dispose of lead-acid batteries once they can no longer be
used. Once a battery is purchased, full liability and responsibility lies on the owner to
dispose of the battery.
GETTING STARTED
The law says that responsibility is still on the owner if the battery is disposed of
improperly by dumping in a landfill, or shipping to a scrap dealer who does not
handle it properly and in which environmental damage occurs.
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
It is illegal to dispose of batteries in any way other than ”thermal recovery” or
recycling of the hazardous substances in batteries according to the Environmental
Protection Agency (EPA).
The Department of Transportation (DOT) has strict guidelines for the shipping of
hazardous materials, which result in large fines if they are not followed.
USING THE BATTERY
Charge Battery
Check with your local ordinances for proper disposal procedures.
Set Up Power Management
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
APPENDIXES
Specifications
Invitium Battery System BAT-24CM
15
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK LINKS
Battery System Specification
Contents
Index
Technical summary
Regulatory Compliance
Product Information
Warranty
The battery system is a self-contained regulated power supply, battery, and charger unit,
packaged in a sheet metal enclosure.
Features
•
•
•
Universal AC input
Regulated 12V DC output
Fast charging
•
•
•
Intelligent communications (USB host)
Cooling fan
GETTING STARTED
About the Battery System
Externally accessible fuses
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
Electrical specifications
Input
Input voltage
85 to 265 VAC
Input frequency
Inrush current limiting
Input protection
Power factor
47 to 63 Hz
USING THE BATTERY
<50A peak
Charge Battery
2A, 250V replaceable fuse
0.95 (150 W, 230 VAC)
12 VDC 5%
Set Up Power Management
Output
Output voltage
Output current
MAINTAINING THE BATTERY
6.0 A maximum
Replace Battery
36 watts nominal; 72 watts maximum
Automatic upon fault removal
6A replaceable fuse
4 hours at nominal output power
>88%
Troubleshooting
Overload recovery
Overload protection
Operating time
Output efficiency
APPENDIXES
Specifications
–MORE–
Invitium Battery System BAT-24CM
Download from Www.Somanuals.com. All Manuals Search And Download.
16
QUICK LINKS
Battery requirements
Contents
Battery type
Sealed lead acid; quantity – 2
Yuasa NP12-12 or B and B EP12-12
12 Ah each
Index
Regulatory Compliance
Product Information
Warranty
Capacity
Output voltage range
Cycle life
12 V nominal 9.5 to 14.4 V
approx. 250 full charge cycles
GETTING STARTED
Connectors/cables
About the Battery System
Input power connector
USB port connector
Standard IEC power connector
Standard USB cable (A male to B male)
Mini-DIN 4-pin device
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
Output power connector
Charging
Charge time (new battery)
3 hours to 80%
4 hours to 90%
6 hours to 100%
USING THE BATTERY
Charge Battery
Set Up Power Management
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
APPENDIXES
Specifications
–MORE–
Invitium Battery System BAT-24CM
17
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK LINKS
Four modes of the battery system
Contents
Charging mode
Running mode
Stand-by mode
Off mode
The battery system is plugged into an AC power source.During charging
Index
mode, the attached load to the battery system is operational.The
batteries charge.The cooling fan runs only when the unit is plugged
into an AC power source.
Regulatory Compliance
Product Information
Warranty
The batteries have some level of charge and the battery system is not
plugged into an AC power source. During running mode, the attached
load to the battery system is operational.The batteries discharge.The
cooling fan is off.The load to the battery system is active.
GETTING STARTED
About the Battery System
The batteries have some level of charge, the battery system is not
plugged into an AC power source, and the load is either disconnected
or off.The cooling fan is off.The load is powered when the system is
either turned on or reconnected.
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
The batteries have no charge and the battery system is not plugged
into an AC power source. During off mode, the attached load to the
battery system is not operational, whether connected or turned on.
The controller board is in sleep mode.The cooling fan is off. Plug the
battery system into an AC power source to leave off mode.
USING THE BATTERY
Charge Battery
Set Up Power Management
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
APPENDIXES
Specifications
–MORE–
Invitium Battery System BAT-24CM
Download from Www.Somanuals.com. All Manuals Search And Download.
18
QUICK LINKS
Power consumption efficiency
Contents
The charging controller board has four levels of power consumption: charging, running,
stand-by, and off.
Index
Regulatory Compliance
Product Information
Warranty
Charging mode
The batteries are charged using a constant current/constant voltage
algorithm. A constant current of 3.0 amps max is applied to each battery
until the voltage on the battery reaches 14.4 V.The current exponentially
decreases to maintain 14.4 V on the battery.The cooling fan is on during
this cycle.The +12VDC regulator circuitry is powered by the power
supply, and the communication system reports the charge status of
the batteries to the host.
GETTING STARTED
About the Battery System
Running mode
Stand-by mode
Off mode
The board consumes power at a rate proportional to the power
consumed by the load during its running mode.The board proves to
be 88% efficient when connected to a 4.5 amp load.
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
The board consumes about 8.5 mA of current when in stand-by mode.
A fully charged and new battery lasts about 3 months in the battery
system before it needs to be replaced.
USING THE BATTERY
Charge Battery
The board consumes about 350 µA of current when in the stand-by
mode. A fully charged and new battery lasts about 3 months in the
battery system before it needs to be replaced.The battery continues
to drain at a rate of 350 µA. Batteries that are not connected to the
controller board have a shelf life of 1 month 97%, 3 months 91%,
6 months 85%, at 68° F.
Set Up Power Management
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
APPENDIXES
Specifications
Invitium Battery System BAT-24CM
Download from Www.Somanuals.com. All Manuals Search And Download.
19
QUICK LINKS
Index
A
Contents
compliance 24
P
components, identifying 3
controller board, charging 17, 18
customer support 22
Index
alarm
ports, connector 3
power
critical battery 8
disabled 8
low battery 8
setting 8, 9
Regulatory Compliance
Product Information
Warranty
checking status 10
connector 3
consumption 19
management 7
D
discharge protection 6
discharging battery 6
B
Power Meter tab 10
Power Options tool 7
product information iv
protection
battery
charging 5
GETTING STARTED
G
guidelines
cleaning v
safety iv
connector ports 3
discharge protection 6
discharging 6
About the Battery System
depth of discharge 6
thermal 6
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
R
disposal 15
fuses 3, 4
regulatory information 24
reinstalling battery 13
removing battery 11
replacing battery 11, 12
housing 2
I
input power 3
maintaining system 11
models 1
output power 3
power consumption 19
reinstalling 13
removing 11
identifying components 3
IEC connector 3
information
USING THE BATTERY
S
product iv
regulatory 24
safety guidelines iv
service v
setting alarm 8
Charge Battery
installing fuses 4
Set Up Power Management
specification, battery 16
symbol explanations 27
M
replacing 11, 12
specifications 16
thermal protection 6
USB serial port 3
maintaining battery system 11
MAINTAINING THE BATTERY
T
N
Replace Battery
thermal protection 6
troubleshooting 14
notification, alarm 9
C
Troubleshooting
O
cables/connectors 2, 17
U
output power 3
fuse 3
charge time 5
USB serial port 3
APPENDIXES
charging battery 5
W
port 3
charging controller board 17, 18
overview of battery system 1
warranty 21
Windows HID power device 7
workstation, cleaning v
cleaning guidelines v
Specifications
Invitium Battery System BAT-24CM
20
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK LINKS
Overview of Standard Warranty
Contents
Summary
Index
• Standard 1-year “repair and return” warranty on all Invitium Medical Workstations
• Typical repair turnaround time of 10 business days
• Repair facilities and technical support in the United States and in Europe
Regulatory Compliance
Product Information
Warranty
Standard Warranty Return Procedure
As a Planar Standard Warranty customer, you must follow the procedure below if you
have a non-functioning Invitium Medical Workstation. Planar customer service staff will
attempt to correct any minor issues that may be causing the problem. Once Planar has
determined that you have a non-functioning product, Planar will arrange for return and
repair of the non-functioning product.
GETTING STARTED
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
1
(866) PLANAR1 (866.752.6271). In Europe, call +358 9 420 01 or send your info by fax
to +358 9 420 0200. You must have the model number, serial number, and proof-of-
purchase available.
USING THE BATTERY
2
Planar customer service staff will attempt to correct any minor issues that may be
causing the problem. If we are unable to correct the problem to your satisfaction,
we will issue a Return Material Authorization (RMA).
Charge Battery
Set Up Power Management
3
4
You must return the product, as specified, to Planar Systems. Do not return the
battery cell or cart to planar Systems unless directed by Planar customer service.
MAINTAINING THE BATTERY
Planar will validate the defect, repair the unit, and return the unit to you. The typical
turnaround time is 10 business days.
Replace Battery
the customer to properly package the hardware, include all appropriate materials, and return
it to the location specified by Planar customer service.
Troubleshooting
APPENDIXES
Specifications
–MORE–
Invitium Battery System BAT-24CM
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Summary Limitations and Exclusions of Invitium Medical Workstations
QUICK LINKS
1
2
3
4
5
Invitium warranty is valid only for the first consumer purchaser (non-transferable).
Contents
Customer support
Invitium warranty does not cover the battery cell(s), mouse, or keyboard.
In North America, call 1 (866) PLANAR1
between 8 A.M. and 5 P.M. Pacific time,
Monday through Friday, or send
a description of your technical
issues and e-mail address to
Index
The customer must provide original proofs of purchase for the Invitium hardware.
Warranty is void on any product with a defaced, modified, or removed serial number.
Regulatory Compliance
Product Information
Warranty
Warranty is void on any product with damage, deterioration, or malfunction resulting
from the following:
a) Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
In Europe, call +358 9 420 01 between
8 A.M. and 4 P.M. Finnish time (Eastern
European time), Monday through
Friday, or send a description of your
technical issues and e-mail address to
GETTING STARTED
b) Repair or attempted repair by anyone not authorized by Planar.
c) Any damage of the product due to shipment.
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
d) Removal or installation of the product.
e) Causes external to the product, such as electric power fluctuations or failure.
f) Use of supplies or parts not meeting Planar specifications.
g) Normal wear and tear, including backlights dimming over time.
h) Any other cause which does not relate to a product defect.
Warranty excludes removal, installation, and setup service charges.
USING THE BATTERY
Charge Battery
6
Set Up Power Management
Limitation of Implied Warranties
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE
DESCRIPTION CONTAINED HEREIN INCLUDING THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
APPENDIXES
Specifications
–MORE–
Invitium Battery System BAT-24CM
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Exclusion of Damages
QUICK LINKS
THE LIABILITY OF PLANAR IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF
THE PRODUCT. PLANAR SHALL NOT BE LIABLE FOR THE FOLLOWING:
Contents
Index
1
DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT,
DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS
OF TIME, LOSS OF PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL,
INTERFERENCE WITH BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS,
EVEN IF ADVISED OF THEIR POSSIBILITY OF SUCH DAMAGES.
Regulatory Compliance
Product Information
Warranty
2
3
ANY OTHER DAMAGES, WHETHER INCIDENTAL, INDIRECT, CONSEQUENTIAL, OR
OTHERWISE.
GETTING STARTED
ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.
About the Battery System
Effect of Local Law
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
This warranty gives you specific legal rights, and you may have other rights, which vary from
locality to locality. Some localities do not allow limitations on implied warranties and/or do
not allow the exclusion of incidental or consequential damages, so the above limitations and
exclusions may not apply to you.
USING THE BATTERY
Charge Battery
Set Up Power Management
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
APPENDIXES
Specifications
Invitium Battery System BAT-24CM
23
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK LINKS
Regulatory Information
Contents
Caution
U.S. Federal Communications Compliance Statement
To comply with the limits for an
FCC Class B computing device,
always use the cords supplied with
the unit. The FCC warns that changes
or modification of the unit not
expressly approved by the party
responsible for compliance could
void the user’s authority to operate
the equipment.
Index
The Planar Invitium Battery (model BAT-24CM) have has been tested and found to comply
within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against interference in a residential installation.
Regulatory Compliance
Product Information
Warranty
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation.
GETTING STARTED
If this equipment does cause harmful interference to radio or television reception (which can
be determined by turning the equipment on and off), the user is encouraged to try to correct
the interference by using one or more of the following measures:
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
USING THE BATTERY
• Consult the dealer or an experienced radio/TV technical for help.
Charge Battery
Canadian DOC Notice
Set Up Power Management
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the Radio Interference Regulation of the Canadian Department of
Communications.
MAINTAINING THE BATTERY
“Le present appareil numerique n’emet pas de bruits radioelecinques depassant les limires
applicables aux appareils numeriques de la class B prescrites dans le Reglement sure le
Replace Battery
Troubleshooting
APPENDIXES
Specifications
–MORE–
Invitium Battery System BAT-24CM
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Compliance
QUICK LINKS
This system has been tested and found to comply with IEC/CSA 601-1, UL 60601-1 and
CAN/CSA C22.2 No. 601.1 medical standards by CSA.
Contents
Index
Because many medical offices are located in residential areas, the Invitium battery system, in
addition to meeting medical requirements, has also been tested and found to comply with the
limits for Federal Communications Commission (FCC) Class B computing devices in a typically
configured system. It is the responsibility of the system integrator or configurer to test and
ensure that the entire system complies with applicable electromagnetic compatibility (EMC)
laws. Planar Systems, Inc. has made great efforts to support the medical device industry, in
particular medical device manufacturers and medical device system integrators. We offer
state-of-the-art systems that are compliant with worldwide accepted medical device safety
standards, and for the European market, EC-marked displays based on compliance with
counsel directive 93/42/EEC — commonly referred to as the Medical Device Directive (MDD).
The following summarizes our qualification of these displays as it relates to compliance with
the MDD.
Regulatory Compliance
Product Information
Warranty
GETTING STARTED
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
The European MDD requires that the intended use of the device be defined. The intended use
of the Invitium workstation is “to display alphanumeric, graphic, and image data as inputted
from any type of medical device.” This system does not provide a measurement function in
any way, and it is the device and systems manufacturers responsibility to verify its function
in the integrated device or system. The workstation was classified as required by the MDD
according to Annex IX of the directive and the medical device (MEDDEV) guidance available
at the time of classification.
USING THE BATTERY
Charge Battery
Set Up Power Management
Because the workstation uses electrical energy and has no direct patient connections and —
by itself — no medical utility, the workstation is classified according to Rule 12 as an MDD
Class I device-component or accessory.
MAINTAINING THE BATTERY
The MDD states that manufacturers of Class I medical devices or accessories shall satisfy the
requirements in regard to design and manufacturing controls; in other words, the applicable
according to Annex XII for the directive, with no notified body annotation.
Replace Battery
Troubleshooting
APPENDIXES
Battery Disposal
Specifications
–MORE–
Invitium Battery System BAT-24CM
25
Download from Www.Somanuals.com. All Manuals Search And Download.
The applicable safety standards for an MDD Class I device are IEC/EN60601-1: 1990 along with
Amendments 1 and 2. To help the medical device designer evaluate the suitability of these
workstations, Planar has also conducted EMC testing to IEC 60601-1-2 as it can be applied.
The display with its power supply alone does not represent a functional medical device.
Hence, Planar configured a minimal operating system to exercise the display. The resulting
data is made available to interested parties.
QUICK LINKS
Contents
Index
Regulatory Compliance
Product Information
Warranty
The data is informative data, not certification data. Certification data must be obtained by the
device or system integrator according to Article 12 of the MDD titled “Particular procedure for
systems and procedure packs.” Paragraph 2 clearly outlines the device or system integrator’s
responsibility in this matter.
In summary, Planar Systems, Inc. is CE-marking these workstations under the Medical Device
Directive, which establishes compliance to the basic medical safety standards. However, EMC
compliance can only be accomplished in the configured medical device or system and is the
responsibility of the device or system manufacturer. Planar has the necessary documentation
such as IEC 60601-1 notified body and other third-party test reports and certifications, a risk/
hazard analysis, and essential requirements checklist, and Planar’s International
Electrotechnical Commission (IEC) declaration of conformity.
GETTING STARTED
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
Planar Systems, Inc., located in Beaverton, Oregon, USA, is the manufacturer of these
workstations in the meaning of the directive. As required by the MDD in Article 14,
Planar Systems, Inc. not residing in the European Economic Area (EEA) has a European
Representative, Planar Systems, Inc. – Espoo, Finland.
USING THE BATTERY
Charge Battery
In the opinion of Planar Systems, Inc. registration required to put its device into commerce
is the responsibility of the medical device/system manufacturer, and Planar supports this
requirement by providing a European Commission (EC) declaration of conformity. If Planar
supplies a workstation to an end user, rather than a device manufacturer, it is the end user’s
responsibility to ensure continued compliance with the MDD of the system in which the
workstation is integrated. For vigilance reporting as required under Article 10 of the MDD,
Set Up Power Management
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
APPENDIXES
Specifications
–MORE–
Invitium Battery System BAT-24CM
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Symbol explanations
QUICK LINKS
Following are explanations of the symbols found on the Invitium battery, model BAT-24CM).
Contents
E226863
Product has been tested and certified with respect to electric shock,
Index
fire, mechanical and other specified hazards only in accordance with
US 2601-1 and CAN/CSA C22.2 No. 601.1 and IEC 60601-1 for medical
Regulatory Compliance
Product Information
Warranty
equipment. If this mark appears with the indicators“C”and“US”, the
UL 60601-1
CAN/CSA C22.2 NO.601.1
CLASS 8750
product is certified for Canadian and U.S. markets, meeting the
applicable Canadian and U.S. standards.
Proof of conformity to applicable European Economic Community
Council directives and two harmonized standards published in the
official journal of the European Communities.
GETTING STARTED
About the Battery System
Locate Battery Housing
Identify Connector Ports
Install Battery Fuses
Product has been tested to comply with FCC Class B standards.
Consult accompanying documents.
USING THE BATTERY
Indoor use only.
Charge Battery
Set Up Power Management
IPX1
Drip-Proof rating per IEC/EN60529
DC (direct current) voltage
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
AC (alternating current) voltage
Fuse
APPENDIXES
~
Specifications
Invitium Battery System BAT-24CM
Download from Www.Somanuals.com. All Manuals Search And Download.
27
|