AUDIO/VIDEO
MULTI-CHANNEL RECEIVER
VSX-D710S
VSX-D810S
VSX-D850S
Operating Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
READ INSTRUCTIONS — All the safety
and operating instructions should be
read before the product is operated.
RETAININSTRUCTIONS—Thesafetyand
operatinginstructionsshouldberetained
for future reference.
HEED WARNINGS — All warnings on the
productandintheoperatinginstructions
should be adhered to.
FOLLOW INSTRUCTIONS — All operating
anduseinstructionsshouldbefollowed.
CLEANING — Unplug this product from the
walloutletbeforecleaning. Theproduct
should be cleaned only with a polishing
cloth or a soft dry cloth. Never clean
withfurniturewax,benzine,insecticides
or other volatile liquids since they may
corrode the cabinet.
ATTACHMENTS—Donotuseattachments
not recommended by the product
manufacturer as they may cause
hazards.
WATER AND MOISTURE — Do not use
this product near water — for example,
nearabathtub,washbowl,kitchensink,
or laundry tub; in a wet basement; or
near a swimming pool; and the like.
ACCESSORIES—Donotplacethisproduct
on an unstable cart, stand, tripod,
bracket, or table. The product may fall,
causing serious injury to a child or adult,
andseriousdamagetotheproduct.Use
only with a cart, stand, tripod, bracket,
or table recommended by the
manufacturer, or sold with the product.
Any mounting of the product should
follow the manufacturer’s instructions,
and should use a mounting accessory
recommended by the manufacturer.
CART — A product and cart combination
shouldbemovedwithcare.Quickstops,
excessive force, and uneven surfaces
may cause the product and cart
combination to overturn.
GROUNDING OR POLARIZATION
÷
If this product is equipped with
OBJECT AND LIQUID ENTRY — Never
pushobjectsofanykindintothisproduct
through openings as they may touch
dangerous voltage points or short-out
parts that could result in a fire or electric
shock. Never spill liquid of any kind on
the product.
SERVICING — Do not attempt to service
this product yourself as opening or
removing covers may expose you to
dangerous voltage or other hazards.
Refer all servicing to qualified service
personnel.
a
polarized alternating current line plug (a
plug having one blade wider than the
other), it will fit into the outlet only one
way. This is a safety feature. If you are
unable to insert the plug fully into the
outlet, try reversing the plug. If the plug
should still fail to fit, contact your
electrician to replace your obsolete
outlet.Donotdefeatthesafetypurpose
of the polarized plug.
÷
If this product is equipped with a three-
wire grounding type plug, a plug having
a third (grounding) pin, it will only fit into
a grounding type power outlet. This is a
safetyfeature.Ifyouareunabletoinsert
the plug into the outlet, contact your
electrician to replace your obsolete
outlet.Donotdefeatthesafetypurpose
of the grounding type plug.
DAMAGEREQUIRINGSERVICE—Unplug
this product from the wall outlet and
refer servicing to qualified service
personnel under the following
conditions:
÷
÷
÷
÷
When the power-supply cord or plug is
damaged.
If liquid has been spilled, or objects
have fallen into the product.
If the product has been exposed to rain
or water.
Iftheproductdoesnotoperatenormally
by following the operating instructions.
Adjust only those controls that are
covered by the operating instructions
as an improper adjustment of other
controls may result in damage and will
POWER-CORD PROTECTION — Power-
supply cords should be routed so that
they are not likely to be walked on or
pinchedbyitemsplaceduponoragainst
them,payingparticularattentiontocords
at plugs, convenience receptacles, and
the point where they exit from the
product.
OUTDOOR ANTENNA GROUNDING — If
an outside antenna or cable system is
connected to the product, be sure the
antennaorcablesystemisgroundedso
as to provide some protection against
voltage surges and built-up static
charges. Article 810 of the National
ElectricalCode,ANSI/NFPA70,provides
information with regard to proper
grounding of the mast and supporting
structure, grounding of the lead-in wire
to an antenna discharge unit, size of
grounding conductors, location of
antenna-discharge unit, connection to
groundingelectrodes,andrequirements
for the grounding electrode. See Figure
A.
often require extensive work by
a
qualified technician to restore the
product to its normal operation.
If the product has been dropped or
damaged in any way.
When the product exhibits a distinct
changeinperformance—thisindicates
a need for service.
÷
÷
REPLACEMENT PARTS
—
When
replacement parts are required, be sure
the service technician has used
replacement parts specified by the
manufacturer or have the same
characteristics as the original part.
Unauthorized substitutions may result
in fire, electric shock, or other hazards.
SAFETYCHECK—Uponcompletionofany
service or repairs to this product, ask
theservicetechniciantoperformsafety
checks to determine that the product is
in proper operating condition.
LIGHTNING—Foraddedprotectionforthis
productduringalightningstorm,orwhen
it is left unattended and unused for long
periods of time, unplug it from the wall
outlet and disconnect the antenna or
cable system. This will prevent damage
to the product due to lightning and
power-line surges.
WALL OR CEILING MOUNTING — The
product should not be mounted to a
wall or ceiling.
POWER LINES
—
An outside antenna
HEAT — The product should be situated
away from heat sources such as
radiators,heatregisters,stoves,orother
products (including amplifiers) that
produce heat.
system should not be located in the
vicinityofoverheadpowerlinesorother
electric light or power circuits, or where
itcanfallintosuchpowerlinesorcircuits.
When installing an outside antenna
system, extreme care should be taken
to keep from touching such power lines
or circuits as contact with them might
be fatal.
VENTILATION — Slots and openings in the
cabinet are provided for ventilation and
to ensure reliable operation of the
product and to protect it from
overheating, and these openings must
notbeblockedorcovered.Theopenings
should never be blocked by placing the
product on a bed, sofa, rug, or other
similar surface. This product should not
be placed in a built-in installation such
as a bookcase or rack unless proper
ventilation is provided or the
manufacturer’s instructions have been
adhered to.
POWER SOURCES — This product should
beoperatedonlyfromthetypeofpower
sourceindicatedonthemarkinglabel. If
you are not sure of the type of power
supply to your home, consult your
product dealer or local power company.
OVERLOADING — Do not overload wall
outlets, extension cords, or integral
convenience receptacles as this can
result in a risk of fire or electric shock.
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
LOCATION
–
The appliance should be
installed in a stable location.
NONUSE PERIODS – The power cord of
theapplianceshouldbeunpluggedfrom
the outlet when left unused for a long
period of time.
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Fig. A
NEC — NATIONAL ELECTRICAL CODE
3
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Introductory Information
01
Checking the Supplied
Accessories
Please check that you've received the following supplied
accessories:
• AM loop antenna
• FM wire antenna
• Dry Cell Batteries x2
(VSX-D710S/D810S : type AA IEC R6P)
(VSX-D850S : type AA IEC LR6)
• Remote Control Unit
Loading the Batteries
• Operating Instructions
Using this Manual
Dry Cell Batteries × 2
This manual is for the VSX-D710S/D810S/D850S audio/
video multi-channel receivers.
It is divided into two main sections:
Set up
This section covers installing your receiver and
connecting up all the other components in your home
theater system to it. It also describes how to set up a
multi-channel speaker system to take full advantage of
the great surround sound features of your receiver.
CAUTION:
Incorrect use of batteries may result in such hazards as
leakage and bursting. Observe the following precautions:
• Never use new and old batteries together.
• Insert the plus and minus sides of the batteries
properly according to the marks in the battery case.
• Batteries of the same shape may have different
voltages. Do not use different batteries together.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public institution’s rules that apply in your country or
area.
Operation
This section shows you how to use every feature of the
receiver and its remote control unit. It also covers using
the supplied remote control to operate your other home
theater components. To find out more about a specific
button, control or indicator, see Displays & Controls
starting on page 22. This will point you to the relevant
chapter in the manual.
In the Additional Information section (p.50-51) you'll
find a troubleshooting section and specifications.
Operating Range of Remote
Control Unit
Installing the Receiver
Please note:
The remote control may not work properly if:
• There are obstacles between the remote control and
the receiver's remote sensor.
• Do not place objects directly on top of this unit. This
would prevent proper heat dispersal.
• When installing in a rack, shelf, etc., be sure to leave
more than 8 inches (20 cm.) of space above the
receiver.
• Direct sunlight or fluorescent light is shining onto the
remote sensor.
• The receiver is located near a device that is emitting
infrared rays.
• The receiver is operated simultaneously with another
infrared remote control unit.
When Making Cable
Connections
Be careful not to arrange cables in a manner that bends
the cables over the top of this unit. If the cables are laid
on top of the unit, the magnetic field produced by the
transformers in this unit may cause a humming noise to
come from the speakers.
30
30
23ft (7m)
4
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
02
Congratulations on buying this fine Pioneer product.
Please read through these operating instructions so you will know how to operate your model
properly. After you have finished reading the instructions, put them away in a safe place for
future reference.
Sorround operation 30
01 Introductory Information
4
ADVANCED THEATER mode
( Dolby/DTS mode) 30
Checking the Supplied Accessories
Using this Manual
Installing the Receiver
4
4
DVD 5.1 ch/7.1ch (5.1 ch for VSX-D710S) input
playback 31
4
When Making Cable Connections 4
Loading the Batteries 4
MIDNIGHT Listening Mode 31
Playing other Source 31
Operating Range of Remote Control Unit 4
07 Using the Tuner 32
Finding a Station 32
02 Contents
5
03 Connecting Your Equipment
6
Tuning Directly to a Station 32
Memorizing Stations 33
Audio/Video Cords
6
Digital audio Cords/Optical Cables
Connecting Digital Components
6
Recalling Memorized Stations 33
6
08 Making a Recording
34
Example Connection for a DVD/LD or LD Player
Connecting Audio Components
Connecting DVD 7.1 Channel (5.1 for VSX-D710S)
Components
7
Making an Audio or a Video Recording 34
Record MONITOR 34
8
Making a Digital Recording 34
9
Connecting Video Components 10
Connecting Antennas 11
09 Controlling the Rest of Your System 35
Recalling Preset Codes 35
Connecting Speakers (VSX-D710S) 12
Connecting Speakers (VSX-D810S/D850S) 13
Hints on Speaker Placement 14
Setting Up Using Preset Code Search (VSX-
D710S/D810S) 36
Setting Up Using Library Search (VSX-D850S)
36
Connecting Additional Amplifiers (VSX-D810S/
D850S only) 15
Setting Up Using Brand Name Search (VSX-850
only) 37
AC Outlet [switched 100 W (0.8 A) max] 15
Learning Mode: Programming Signals from other
Remote Controls 38
04 Preparations 16
Setting Up for Surround Sound 16
Setting the Volume Level of Each Channel 21
Erasing One of the Remote Control button
Settings 39
Clearing All the Remote Control Settings 39
Direct Function 39
05 Displays & Controls 22
Front Panel 22
Checking Preset Code 40
Display 23
Operating other Pioneer Components 40
Remote Control (VSX-D710S/D810S) 24
Remote Control (VSX-D850S) 26
LCD Display (VSX-D850S only) 26
CD/MD/CD-R/VCR/DVD/LD/DVR Player/
Cassette Deck Controls 41
Cable TV/Satellite TV/TV/DTV Controls 42
Preset Code List 43
06 Sound Modes 27
Learning about the Sound Modes 27
Switching ANALOG/DIGITAL Signal Input 29
10 Additional Information 50
Troubleshooting 50
Playing Sources with Dolby Digital or
DTS Sound 29
Specifications 51
Selecting a Sound Mode 30
5
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Equipment
03
Before making or changing the connections, switch off the power and disconnect the power cord from the AC wall
outlet.
Audio/Video Cords
Use audio/video cords (not supplied) to make analog
audio and video connections.
Connect red plugs to R (right), white plugs to L (left),
and the yellow plugs to VIDEO.
Be sure to insert completely.
Digital Audio Cords/Optical
Cables
Commercially available digital audio coaxial cords
(standard video cords can also be used) or optical cables
(not supplied) are used to connect digital components to
this receiver.
When you use optical digital input or output terminals,
pull off the caps and insert the plugs. Be sure to insert
completely.
R
L
VIDEO
Digital audio cord
Optical cable
(or standard video cord)
Connecting Digital Components
In order to use PCM/
2
Digital/DTS soundtracks, you need to make digital audio connections.
You can do this by either coaxial or optical connections (you do not need to do both). The quality of these two types
of connections is the same but since some digital components only have one type of digital terminal, it is a matter of
matching like with like (for example, the coaxial out from the component to coaxial in on the receiver). The VSX-
D710S has a coaxial input and two optical inputs for a total of three digital inputs. The VSX-D810S has a coaxial
input and three optical inputs for a total of four digital inputs and the VSX-D850S has a coaxial input and four
optical inputs for a total of five digital inputs. Connect your digital components as shown below. There is one digital
out jack which is marked DIGITAL OUT. If you connect this to the optical input on a digital recorder (currently these
include MD, DAT and CD-R) you can make direct digital recordings with this unit.
When connecting your equipment, always make sure the power is turned off and the power cord is disconnected
from the wall outlet.
The arrows indicate the direction of the audio signal.
VSX-D710S
DIGITAL
IN
DIGITAL
OUT
DIGITAL
OUT
DIGITAL IN
PCM/2/DTS
IN
AUX
CD recorder
CD player
CD
ANTENNA
CONTROL
OUT
VIDEO
IN
AM
(DVD)
COAX
(CD)
CD-R)
OPT
1
2
LOOP
OPT
OPT
TO
VIDEO
MNTOR
TV
VCR
DVR
/
OUT
IN
S
IN
IN
IN
OUT
TO
OT
FRONT
CENTER
R
L
S
TV
/
MONTOR
SAT
OT
TV
IN
IN
VCR
DVR
/
DIGITAL
OUT
DVD
S
SUB W.
/
LD
PREOUT
I
FRONT
A
R
E
C
TV
/
S
OUT
SAT
R
L
I
FM
UNBAL75Ω
CD - R
SURROUND
/ TAPE
P
L
/ MD
S
DVD/
LD
IN
A
Y
I
CENTER
SUB W.
DVD 5.1 CH INPUT
R
L
DIGITAL OUT
COAX
DVD player
6
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Equipment
DIGITAL
TV tuner
(or Satellite tuner)
OUT
VSX-D810S/D850S
DIGITAL OUT
COAX
FM
AM
DVD
CENTER SUB WOOFER
ANTENNA
UNBAL
PCM/2ꢀ
LOOP
7.1 CH
INPUT
75Ω
AUX
IN
/DTS
C
DVD player
COMPONENT
VIDEO
O
A
CD
IN
(DVD)
SURROUND
X
VIDEO
TO
R
R
L
O
TO MONITOR TV OUT
MONTOR
O
U
T
TV
T
S
¥
(CD)
OUT
O
P
VCR
DVR
/
L
T
Y
Y
PB
PR
DIGITAL
SURROUND BACK
ø
S
(CD-R)
OUT
IN
O
P
VIDEO
VCR
FRONT
CENTER
π
OUT
S DVR
IN
IN
L
T
R
B
TV
/
OUT
CD player
S
P
E
A
K
E
R
S
SAT
(TV)
IN
IN
IN
O
P
T
TO
DVD
/ LD
TV
/
[
MONTOR
TV OUT
S
SAT
(VCR)
FRONT
IN
A
O
P
T
SUB
R
OUT
WOOFER
E
C
IN
S
DVD/
LD
CD - R
/ TAPE
/ MD
PREOUT
IN
DIGITAL UT
DVD 7.1 CH
INPUT
P
L
CONTROL
OUT
DIGITAL
OUT
DIGITAL
IN
A
Y
IN
CD recorder
R
L
DIGITAL
OUT
VCR
VSX-D850S only
Example Connection for a DVD/LD or LD Player
Since some LDs have soundtracks recorded on the special 2RF format you need to make special hook ups to ensure
you can play all LDs on your system. If you don't have an LD (or an LD player with your DVD player) you don't need
to worry about this. For the VSX-D710S/D810S/D850S hook up your DVD/LD or LD player directly and make sure
you make both a 2RF output and either a coaxial or optical digital connection. Of course you must hook up your
DVD/LD or LD player with standard (coaxial or optical) digital connections but if you are able to hook up your player
with a 2 RF output (if your player has one) this will ensure you can use all LDs available. We also recommend
hooking up your digital components to analog audio jacks as well.
Before making or changing the connections, switch off the power and disconnect the power cord from the AC wall
outlet. The diagram is for the VSX-D850S but hook up an RF Demodualtor to the VSX-D710S in the same manner.
The arrows indicate the direction of the audio signal.
RF demodulator RFD-1
DIGITAL IN
2
(AC-3)(LD)
RF OUT
OPTICAL
COAXIAL
DIGITAL OUT
1
PCM/
(OPT.)
PCM/
PCM/
(OPT.)
PCM/
RF IN
(AC-3)(LD)
2
3
DIGITAL OUT
DIGITAL IN
VSX-D850S
DVD/LD player
or LD player
FM
AM
DVD
CENTER SUB WOOFER
ANTENNA
UNBAL
PCM/2ꢀ
LOOP
7.1 CH
INPUT
75Ω
AUX
/DTS
C
IN
COMPONENT
O
VIDEO
A
CD
IN
(DVD)
SURROUND
X
VIDEO
VIDEO
TO
R
R
L
ANALOG
STEREO
O
P
TO MONITOR TV OUT
MONTOR
O
U
T
TV
T
VIDEO
S
¥
(CD)
OUT
OUT
O
P
VCR
DVR
/
L
T
Y
Y
PB
PR
SURROUND BACK
ø
S
(CD-R)
L
OUT
IN
O
P
VIDEO
VCR
/
FRONT
CENTER
π
S DVR
IN
IN
L
T
R
B
TV
/
OUT
S
P
E
A
K
E
R
S
SAT
(TV)
IN
IN
IN
O
P
R
T
TO
DVD
/ LD
FRONT
TV
/
[
MONTOR
TV OUT
S
SAT
(VCR)
IN
A
O
P
T
SUB
R
OUT
WOOFER
E
C
IN
S
DVD/
LD
CD - R
/ TAPE
/ MD
PREOUT
IN
DIGITAL OUT
DVD 7.1 CH
INPUT
P
L
CONTROL
OUT
A
Y
IN
R
L
MEMO:
Be sure to make either a digital coaxial or digital optical connection as well, but you don't need to make both. Make
sure the RF demodulator digital in switch is set correctly (optical or coaxial depending on the connection). See the
component's instruction manual if you are unsure about its input and output jacks.
7
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Equipment
Connecting Audio Components
To begin set up, connect your audio components to the jacks as shown below. These are all analog connections and
your analog audio components (like a cassette deck) use these jacks. Remember that for components you want to
record with you need to hook up four plugs (a set of stereo ins and a set of stereo outs), but for components that only
play you only need to hook up one set of stereo plugs (two plugs). To use digital source features you must hook up
your digital components to the digital inputs (see the previous page for more on digital connections) but it is also a
good idea to hook up your digital components to these analog audio jacks. If you want to record to/from digital
components (like an MD) to/from analog components, you must hook up your digital equipment with these analog
connections.
When connecting your equipment, always make sure the power is turned off and the power cord is disconnected
from the wall outlet.
The arrows indicate the direction of the audio signal.
VSX-D710S
OUTPUT
DIGITAL
PCM/2/D
IN
L
AUX
CD player
CD
ANTENNA
R
VIDEO
CONTROL
OUT
IN
AM
(DVD)
COAX
LOOP
TO
VIDEO
MONTOR
TV
VCR
DVR
/
OUT
IN
S
IN
IN
IN
OUT
TO
OUT
S
TV
/
MONTOR
SAT
OUT
TV
IN
IN
VCR
DVR
/
DVD
S
SUB W.
REC PLAY
/
LD
PREOUT
IN
FRONT
CD recorder
or Cassette deck
L
R
E
C
TV
/
S
OUT
SAT
R
L
IN
FM
UNBAL75Ω
CD - R
SURROUND
/ TAPE
R
P
L
/ MD
S
DVD/
LD
IN
A
Y
IN
CENTER
SUB W.
DVD 5.1 CH INPUT
R
L
VSX-D810S/D850S
AM
Cassette deck placement
FM
Depending on where the cassette
deck is placed, noise may occur
during playback of your cassette
deck which is caused by leakage
flux from the transformer in the
receiver. If you experience noise,
move the cassette deck farther
away from the receiver.
OUTPUT
CENTE
ANTENNA
UNBAL
PCM/2ꢀ
LOOP
75Ω
AUX
IN
/DTS
C
O
L
A
CD
IN
CD player
(DVD)
X
VIDEO
TO
R
O
P
MONTOR
R
O
U
T
TV
T
S
¥
(CD)
OUT
O
P
VCR
DVR
/
R
T
SUR
ø
S
(CD-R)
OUT
IN
O
P
VIDEO
VCR
/
π
OUT
S DVR
IN
IN
T
TV
/
S
SAT
(TV)
IN
IN
IN
O
P
T
TO
DVD
/ LD
TV
/
[
MONTOR
TV OUT
S
SAT
(VCR)
A
S
FRONT
IN
O
P
T
REC PLAY
SUB
R
OUT
WOOFER
E
C
IN
S
DVD/
LD
CD - R
/ TAPE
/ MD
PREOUT
IN
DIGITAL OUT
CD recorder
DVD 7.1 CH
INPUT
L
P
L
CONTROL
OUT
A
Y
IN
or Cassette deck
R
R
L
8
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Equipment
Connecting DVD 7.1 Channel (5.1 ch for VSX-D710S) Components
DVD and LD discs are compatible with both 2 channel and 7.1 channel audio output formats. Connections can be
made from a DVD player/multi-channel decoder equipped with 7.1 analog outputs to the 6.1 analog inputs on this
unit (the surround back channel is mono on the VSX-D810S/D850S models so we refer to it as 6.1 ch). You need to
connect both the left and right surround back channels for the VSX-D810S/D850S models but the sound from this
channel will only be mono. Always make sure that the receiver is switched off and unplugged from the wall outlet
before making or changing any connections.
The arrows indicate the direction of the audio signal.
DVD/multi channel
decoder with 5.1 channel
VSX-D710S
DIGITAL
OUT
DIGITAL IN
PCM/2/DTS
analog output jacks
IN
AUX
CD
ANTENNA
CONTROL
OUT
VIDEO
IN
AM
(DVD)
COAX
(CD)
OPT
(CD-R)
OPT
1
2
LOOP
OPT
TO
VIDEO
MONTOR
TV
VCR
DVR
/
OUT
IN
FRONT
SURROUND
OUTPUT
OUTPUT
S
SUB
VIDEO
OUT
IN
IN
IN
OUT
TO
OUT
WOOFER
CENTER
FRONT
C
L
L
R
L
S
TV
/
MONTOR
SAT
OUT
TV
IN
IN
VCR
DVR
/
R
R
DVD
S
SUB W.
/
LD
PREOUT
IN
FRONT
A
R
E
C
TV
/
S
OUT
SAT
R
L
IN
FM
UNBAL75Ω
CD - R
SURROUND
/ TAPE
P
L
/ MD
S
DVD/
LD
IN
A
Y
IN
CENTER
SUB W.
DVD 5.1 CH INPUT
R
L
FM
AM
DVD
CENTER SUB WOOFER
ANTENNA
UNBAL
PCM/2ꢀ
LOOP
7.1 CH
INPUT
75Ω
AUX
IN
/DTS
C
COMPONENT
VIDEO
O
A
CD
IN
(DVD)
SURRUND
X
VIDEO
T
R
R
L
O
P
TO MONITOR TV O
MONTO
O
U
T
T
T
S
¥
(CD)
OUT
O
P
VCR
DVR
/
L
T
Y
PB
P
SURROUND BACK
ø
S
(CD-R)
FRONT
SURROUND
OUTPUT
SURROUND
OUT
IN
O
P
VIDEO
VCR
/
OUTPUT
BACK OUTPUT
FRONT
CENTE
SUB
VIDEO
OUT
OUT
S DVR
IN
IN
L
T
R
L
L
L
TV
/
WOOFER
π
CENTER
S
P
E
A
K
E
R
S
SAT
(TV)
IN
IN
IN
O
P
T
TO
DVD
/ LD
FRONT
TV
/
[
MONTOR
TV OUT
S
SAT
(VCR)
IN
A
R
R
R
O
SUB
R
P
T
OUT
WOOFER
E
C
IN
S
DVD/
LD
CD - R
/ TAPE
/ MD
PREOUT
IN
DIGITAL OUT
DVD 7.1 CH
INPUT
P
L
CONTROL
OUT
A
Y
IN
R
L
DVD/multi channel
decoder with 7.1 channel
analog output jacks
VSX-D810S/D850S
MEMO:
• The 7.1 channel (5.1 channel for VSX-D710S) input can only be used when DVD 7.1 ch (5.1 channel for VSX-
D710S) input is selected.
• For 6.1 channel output select the SB 1ch setting (see p. 20). In this case you can connect the single surround back
speaker to either the left or right surround back terminals.
9
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Equipment
Connecting Video Components
Connect your video components to the jacks as shown below. Regarding digital video components (like a DVD
player), you must use the analog video connections pictured on this page for the video signal but in order to use a
digital source (like a DVD) you must hook up their audio to a digital audio input (see p. 6-7). It is also a good idea to
hook up your digital components with analog audio connections as well (see p. 8).
When connecting your equipment always make sure the power is turned off and the power cord is disconnected from
the wall outlet.
The arrows indicate the direction of the audio signal.
Video deck
VSX-D710S
INPUT
OUTPUT
OUTPUT
VIDEO
VIDEO
VIDEO
L
DIGITAL
PCM/2/D
IN
AUX
CD
TV tuner
L
ANTENNA
CONTROL
OUT
VIDEO
L
(or Satellite tuner)
IN
AM
(DVD)
COAX
R
R
LOOP
R
TO
VIDEO
MONTOR
TV
VCR
/
OUT
IN
S
IN
IN
IN
OUT
TO
OUT
S
TV
/
MONTOR
SAT
OUT
TV
IN
IN
VCR
DVR
/
DVD
S
SUB W.
/
LD
PREOUT
IN
OUTPUT
FRONT
INPUT
VIDEO
R
E
C
TV
/
S
TV
OUT
SAT
VIDEO
R
L
IN
FM
UNBAL75Ω
CD - R
DVD player
(or LD player)
SU
/ TAPE
/ MD
P
L
S
DVD/
LD
(monitor)
L
IN
A
Y
IN
CENTER
SUB W.
DVD 5.1 CH INPUT
R
R
L
Video deck
INPUT
OUTPUT
FM
AM
CENTER
ANTENNA
UNBAL
PCM/2ꢀ
OUTPUT
OOP
75Ω
AUX
IN
/DTS
C
VIDEO
VIDEO
O
A
VIDEO
CD
IN
(DVD)
X
TV tuner
(or Satellite tuner)
VIDEO
TO
R
R
O
P
L
L
MONTOR
O
U
T
TV
L
T
S
¥
(CD)
OUT
O
P
VCR
DVR
/
R
R
R
T
SURR
ø
S
(CD-R)
OUT
IN
O
P
VIDEO
VCR
/
OUT
S DVR
N
IN
T
TV
/
π
S
P
E
A
K
E
R
S
SAT
(TV)
IN
IN
IN
O
P
T
TO
DVD
/ LD
FRONT
TV
/
[
MONTOR
TV OUT
S
SAT
(VCR)
IN
O
SUB
R
P
T
OUT
WOOFER
E
C
IN
S
DVD/
LD
CD - R
/ TAPE
/ MD
PREOUT
IN
DIGITAL OUT
OUTPUT
DVD 7.CH
UT
P
L
INPUT
VIDEO
CONTROL
OUT
A
Y
IN
VIDEO
TV
(monitor)
DVD player
(or LD player)
R
L
L
R
VSX-D850S/D810S
Front
Front video connections are accessed via the front panel
input selector as “VIDEO.”
MEMO:
This receiver also has S-Video and component video inputs
and outputs. These can give you a better picture than the
standard composite video connections. For S-Video
connections use an S-Video cord (not supplied); for
component video connections use a three-way RCA cord (not
supplied).
Note that a signal fed into a video input on this receiver is
only sent to your TV from the corresponding video output.
In other words, if you connect your VCR to this receiver
using a standard video cord, you need to connect the receiver
to your TV using a standard video cord. If your DVD player
is connected using an S-Video cord, make sure that you also
connect the receiver to your TV with an S-Video cord.
VIDEO INUT
V
L
R
Video camera (etc.)
10
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Equipment
Connecting Antennas
Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality,
connect external antennas (see Using external antennas, below). Always make sure that the receiver is switched off
and unplugged from the wall outlet before making or changing any connections.
DIGITAL
OUT
DIGITAL IN
PCM/2/DTS
FM
UNBAL
75Ω
AM
CENTER SUB WOOFE
ANTENNA
PCM/2ꢀ
LOOP
IN
IN
AUX
CD
AUX
IN
/DTS
C
O
V
V
A
ANTENNA
CD
IN
(DVD)
SUR
CONTROL
OUT
VIDEO
X
AM
VIDEO
TO
R
R
L
(DVD)
COAX
(CD)
OPT
(CD-R)
OPT
O
P
1
2
LOOP
MONTOR
OPT
O
U
T
TV
T
S
¥
TO
VIDEO
(CD)
OUT
MONTOR
TV
VCR
DVR
/
OUT
IN
Y
O
P
VCR
DVR
/
L
T
S
SURROUND BACK
IN
IN
IN
OUT
TO
ø
S
OUT
(CD-R)
OUT
IN
O
P
VIDEO
VCR
/
FRONT
CENTER
R
L
OUT
S DVR
IN
IN
T
R
TV
/
S
TV
/
π
S
P
E
A
K
E
R
S
MONTOR
SAT
SAT
OUT
(TV)
IN
TV
IN
IN
IN
IN
O
P
VCR
DVR
/
T
TO
DVD
/ LD
FRONT
DVD
TV
/
[
MONTOR
TV OUT
S
S
SUB W.
/
LD
SAT
(VCR)
PREOUT
IN
IN
FRONT
A
O
P
T
SUB
R
A
OUT
WOOFER
E
C
IN
S
DVD/
LD
R
E
C
TV
/
S
OUT
SAT
CD - R
/ TAPE
/ MD
PREOUT
R
L
IN
IN
DIGITAL OUT
FM
UNBAL75Ω
CD - R
P
L
DVD 7.1 CH
INPUT
SURROUND
/ TAPE
/ MD
CONTROL
OUT
P
L
A
Y
IN
S
DVD/
LD
IN
A
Y
IN
CENTER
R
L
SUB W.
DVD 5.1 CH INPUT
R
L
VSX-D810S/D850S
VSX-D710S
AM loop antenna
FM wire antenna
Assemble the antenna and connect to the receiver.
Attach to a wall, etc. (if desired) and face in the
direction that gives the best reception.
Connect the FM wire antenna and fully extend vertically
along a window frame or other suitable area, etc.
Antenna snap connectors
Twist the exposed wire strands together and insert into
the hole, then snap the connector shut.
3/8 in. (10mm)
Using External Antennas
To improve AM reception
To improve FM reception
Connect a 15-18 feet length of vinyl-coated wire to the AM
antenna terminal without disconnecting the supplied AM loop
antenna.
Connect an external FM antenna.
For the best possible reception, suspend horizontally outdoors.
Outdoor antenna
AM LOOP
ANTENNA
Indoor antenna
(Vinyl-coated wire)
FM
UNBAL
15-18 ft. (5–6m)
75Ω
75 Ω coaxial cable
FM
11
ANTENNA
VSX-D710S
VSX-D710S
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Equipment
Connecting Speakers (VSX-D710S)
A full complement of six speakers is shown here but, naturally, everyone’s home setup will vary. Simply connect the
speakers you have in the manner described below. The receiver will work with just two stereo speakers (called “front”
speakers in the diagram) but we recommend you use at least three speakers and five is best.
Make sure you connect the speaker on the right to the right terminal and the speaker on the left to the left terminal.
Also make sure the positive and negative (+/–) terminals on the receiver match those on the speakers.
MEMO:
• The receiver has two speaker systems, A & B. A is the main system supporting the full complement of surround
sound speakers. If you switch on both A & B speaker systems, only front speakers and the subwoofer will
be audible. No sound will come from the center or surround speakers but multi channel sources will be
down-mixed to the active speakers so no sound will be lost. Similarly, if you choose just the B system you‘ll only
hear the front speakers connected to the B system and multi channel sources will be down-mixed to these two
speakers.
• Use speakers with a nominal impedance of 8 Ω to 16 Ω.
Center Speaker
C
Front Speakers (A)
SURROUND Speakers
L
R
SL
SR
DIGITAL
OUT
DIGITAL IN
PCM/2/DTS
IN
IN
AUX
CD
COMPONENT
VIDE
(DVD/LD) IN
1
TO MONITR TV OUT
ANTENNA
CONTROL
OUT
VIDEO
AM
(DVD)
COAX
(CD
OPT
(CD-R)
OPT
1
2
LOOP
PT
TO
VIDEO
MONTOR
TV
VCR
DVR
/
OUT
IN
Y
PB
PR
Y
P
B
PR
(TV/SAT) IN
2
S
IN
IN
IN
OUT
TO
OUT
SPEAKERS
FRONT
CENTER
SURROUND
FRONT
R
L
R
L
R
L
S
TV
/
MONTOR
SAT
OUT
TV
IN
IN
VCR
DVR
/
DVD
S
SUB W.
/
LD
PREOUT
IN
FRONT
A
B
CENTER
PREOUT
R
E
C
TV
/
S
OUT
SAT
R
L
IN
FM
UNBAL75Ω
CD - R
SURROUND
/ TAPE
/ MD
P
L
S
DVD/
LD
IN
A
Y
IN
CENTER
SUB W
DVD 5.1 CH INPUT
R
L
VSX-D710S
Powered
subwoofer
Be sure to complete all other
connections before connecting this
unit to the AC power source.
INPUT
When using the speaker on your TV as the center
speaker (‘C’), connect the CENTER PREOUT jack on this
unit to the audio input jack on your TV. In this case, the
center speaker shown is unnecessary.
12
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Equipment
Connecting Speakers (VSX-D810S/D850S)
A full complement of seven speakers is shown here but, naturally, everyone’s home setup will vary. Simply connect
the speakers you have in the manner described below. The receiver will work with just two stereo speakers (called
“front” speakers in the diagram) but we recommend you use at least three speakers. To get the most out of the VSX-
D810S/D850S models hook up all seven speakers, including a surround back speaker, the latest advancement in
home theater. You can only hook up one speaker here as the surround back channel is mono on the VSX-D810S/
D850S models. This is actually 6.1 ch sound but we usually refer to it by its regular name, 7.1 ch sound. The two are
essentially the same thing both offering surround back sound. If you don’t hook up a surround back speaker you can
use that speaker terminal to hook up your subwoofer.
Make sure you connect the speaker on the right to the right terminal and the speaker on the left to the left terminal.
Also make sure the positive and negative (+/–) terminals on the receiver match those on the speakers.
MEMO:
• The receiver has two speaker systems, A & B. A is the main system supporting the full complement of surround
sound speakers. If you switch on both A & B speaker systems, only front speakers and the subwoofer will be
audible. No sound will come from the center or surround speakers but multi channel sources will be down-
mixed to the active speakers so no sound will be lost. Similarly, if you choose just the B system you‘ll only hear the
front speakers connected to the B system and multi channel sources will be down-mixed to these two speakers.
• Use speakers with a nominal impedance of 8 Ω to 16 Ω.
• If you select subwoofer (SB SUBWF) in the surround back speakers setting mode (see p.17) you can hook a
subwoofer up to the surround back speaker terminals. In this case the terminals will be used for this “passive
subwoofer” and no surround back sound will come from these terminals.
Center Speaker
C
Front Speakers (A)
SURROUND Speakers
SURROUND BACK Speaker
SB
L
R
SL
SR
FM
UNBAL
75Ω
AM
DVD
CENTER SB WOOFER
ANTENNA
PCM2ꢀ
LOOP
7.1 CH
INPUT
AUX
IN
DTS
C
COMPOENT
VIDEO
PREOUT
L
O
(DVD/LD) IN
1
SURROUND
BACK
A
L
CD
IN
(DVD)
SURROUND
VIDEO
TO
R
R
L
O
P
TO MONIOR TV OUT
MONTOR
O
U
T
TV
T
S
¥
(CD)
OUT
O
P
VCR
DVR
/
L
T
P
B
PR
Y
Y
PB
PR
R
CENTER
SURROUNBACK
ø
S
(TV/SAT) IN
2
SURRUND
FRONT
(CD-R)
OUT
IN
O
P
VIDEO
VCR
/
FROT
CENTER
FRONT
SURROUND
OUT
S DVR
IN
IN
L
L
L
T
R
BACK
R
R
TV
/
π
S
P
E
A
K
E
R
S
SAT
(TV)
IN
IN
IN
O
P
AC OUTLET
T
TO
DVD
/ LD
FRONT
TV
/
[
MONTOR
TV OUT
S
SAT
(VCR)
IN
A
B
O
P
T
SUB
R
OUT
WOOFER
E
C
IN
S
DVD/
LD
CD - R
/ TAPE
/ MD
REOUT
IN
DIGITAL OUT
DVD 7.1 CH
INPUT
P
L
CONTROL
OUT
A
Y
IN
R
L
Subwoofer (passive)
VSX-D810S/D850S
Powered subwoofer
Be sure to complete all
other connections before
connecting this unit to
the AC power source.
INPUT
When using the speaker on your TV as the center
speaker (‘C’), connect the CENTER PREOUT jack on this
unit to the audio input jack on your TV. In this case, the
center speaker shown is unnecessary.
13
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Equipment
Speaker terminals
The speaker terminals also
accept single banana plugs.
(Refer to speaker manual for
details.)
1 Twist exposed wire 2 Loosen speaker terminal
3 Tighten terminal.
strands together.
and insert exposed wire.
3/8 in. (10mm)
Caution:
Make sure that all the bare speaker wire is twisted together and inserted fully into the speaker terminal. If
any of the bare speaker wire touches the back panel it may cause the power to cut off as a safety measure.
Overhead view of speaker set up ~VSX-D710S~
Hints on Speaker Placement
Front
Left
Front
Right
Speakers are usually designed with a particular place-
ment in mind. Some are designed to be floor standing,
while others should be placed on stands to sound their
best. Some should be placed near a wall; others should
be placed away from walls. Follow the guidelines on
placement that the speaker manufacturer provided with
your particular speakers to get the most out of them.
Center
Subwoofer
Surround Right
Surround Left
• Place the front left and right speakers at equal
Listening Position
distances from the TV.
• When placing speakers near the TV, we recommend
using magnetically shielded speakers to prevent
possible interference, such as discoloration of the
picture when the TV is switched on. If you do not
have magnetically shielded speakers and notice
discoloration of the TV picture, move the speakers
farther away from the TV.
3-D view of speaker set up
• Install the center speaker above or below the TV so
that the sound of the center channel is localized at
the TV screen.
Overhead view of speaker set up ~VSX-D810S/D850S~
CAUTION!
Front
Right
Front
Left
If you choose to install the center speaker on top
of the TV, be sure to secure it with putty, or by
other suitable means, to reduce the risk of damage
or injury resulting from the speaker falling from
the TV in the event of external shocks such as
earthquakes.
Center
Subwoofer
Surround Right
Surround Left
• If possible, install the surround speakers slightly
above ear level.
Listening Position
• Try not to install the surround speakers farther away
from the listening position than the front and center
speakers. Doing so can weaken the surround sound
effect.
Surround Back
3-D view of speaker set up
To achieve the best possible surround sound, install your
speakers as shown on the right. Be sure all speakers are
installed securely to prevent accidents and improve
sound quality.
14
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Equipment
Connecting Additional Amplifiers (VSX-D810S/D850S only)
This receiver has more than sufficient power for any home use, however it is possible to add additional amplifiers to
every channel. Make the connections shown below to add amplifiers to power your speakers. Always make sure that
the receiver is switched off and unplugged from the wall outlet before making or changing any connections.
The arrows indicate the direction of the audio signal.
ANALOG IN
Front channel
amplifier
L
R
VSX-D810S/D850S
ANALOG IN
FM
UNBAL
75Ω
AM
PCM/2ꢀ
LOOP
Surround channel
amplifier
AUX
/DTS
C
IN
PREOUT
L
O
1
SURROUND
BACK
A
L
CD
(DVD)
X
IN
L
R
VID
O
P
T
OU
¥
T
(CD)
O
P
VCR
/
DVR
T
PR
R
R
CENTER
ø
SURROUND
FRONT
(CD-R)
ANALOG IN
IN
O
P
VIDEO
IN
OUT
FRONT
SURROUND
Surround Back
channel amplifier
L
L
TV /
R
T
(TV)
π
SAT
IN
O
P
AC OUTLET
IN
(V R)
T
TO
DVD
/ LD
FRONT
[
MONTOR
TV OUT
C
IN
B
O
SUB
R
E
P
T
OUT
WOOFER
IN
C
CD - R
/ TAPE
/ MD
PREOUT
DIGITAL OUT
DVD 7.1 CH
INPUT
P
L
ANALOG IN
A
IN
Y
Center channel
amplifier
R
L
INPUT
Powered
Subwoofer
MEMO:
To hear sound only from the pre-outs, disconnect any speakers that are connected
directly to the receiver. (Using the SPEAKERS button to switch off the speakers also
mutes the pre-outs; you must set it to either A, B, or A+B.)
AC Outlet [switched 100 W (0.8 A) max]
Power supplied through this outlet is turned on and off by the receiver's POWER
switch.
Total electrical power consumption of connected equipment should not exceed
100 W (0.8 A).
CAUTION
L
Do not connect a heater, TV, etc. Also, make sure no exposed speaker wire is
touching the rear panel, this may cause the receiver to turn off automatically.
AC OUTLET
B
MEMO:
• This unit should be disconnected by removing the power plug from the wall
socket when not in regular use, e.g., on vacation.
• Do not connect appliances with high power consumption such as heaters,
irons, or television sets to this AC OUTLET in order to avoid overheating and
fire risk. This can also cause the receiver to malfunction.
CAUTION:
DO NOT CONNECT A MONITOR OR TV SET TO THIS UNIT'S AC OUTLET.
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord
when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of
furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The
power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire
or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest
PIONEER authorized service center or your dealer for a replacement.
15
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
04
• LFE attenuator setting mode (page 18)
Use to specify the peak level for the LFE channel and
the crossover network for rerouted bass frequencies.
• Low cut filter ON/OFF setting mode (page 18)
Use to cut the distorted sound from the subwoofer.
• FRONT speakers distance setting mode (page 18)
Use to specify the distance from your listening
position to your front speaker.
Setting Up for Surround Sound
Be sure to switch the power of this unit on (The
STANDBY indicator goes out).
To ensure the best possible surround sound, be sure to
complete the following set up operations. This is
particularly important when using the 2 (Dolby)/DTS
surround mode. You only need to make these settings
once (unless you change the placement of your current
speaker system or add new speakers, etc.). Refer to the
following pages for detailed descriptions of the settings
available for each mode.
• CENTER speakers distance setting mode (page 18)
Use to specify the distance from your listening
position to your center speaker.
• SURROUND speakers distance setting mode (page
19)
Use to specify the distance from your listening
position to your surround speakers.
SOURCE
RECEIVER
• SURROUND BACK speakers distance setting
mode (VSX-D810S/D850S only) (page 19)
Use to specify the distance from your listening
position to your surround back speaker.
• Dynamic range control setting mode (page 19)
Use to compress the dynamic range of the sound track.
• Dual mono setting mode (page 19)
Use with 2 Digital software that has dual mono
encoding if you want to isolate one channel or listen
in this specialized mono mode.
1
DVD
RCV
TV
VCR
CD-R
TVC
MULTI CONTROL
TUN
CD
2
4
2
3
ATT
6
1
MIDNIGHT
5.1 / 7.1
5
4
EFFECT
8
0
9
DISC
7
10
ENTER
DTV INFO MPX/RETURN D.ACCESS
GUIDE
8
7
3
¶
BAND
CLASS
DTV ON/OFF DTV MENU
1
¡
4
¢
2
/DTS
DSP
TEST TONE SIGNAL SELECT
CH SELECT
LOUDNESS
CH LEVEL
FUNCTION
MUTING
FL DIMMER
TUNE
SETUP
• Component input 1 setting (page 20)
Use to specify the video component connected to this
input.
ST
ST
ENTER
TUNE
• Component input 2 setting (page 20)
Use to specify the video component connected to this
input.
CHANNEL
3
VOLUME
MASTER VOLUME
MENU
TVFUNC
• Multi Channel External Decoder Surround Back
1ch/2ch setting (VSX-D810S/D850S only) (page 20)
Use to specify whether you hooked up your External
Multi Channel Decoder surround back speaker
connection with one or two cords. If you’re not using
a External Multi Channel Decoder ignore this setting.
• Coaxial digital input setting (page 20)
Use to specify the input to be assigned to the coaxial
digital input.
• Optical digital input 1 setting (page 20)
Use to specify the input assigned to this optical digital
input.
• Optical digital input 2 setting (page 20)
Use to specify the input assigned to this optical digital
input.
1 Press RECEIVER to turn the power on.
The STANDBY indicator goes out.
2 Press RCV.
This button switches the remote to the receiver’s
surround setup mode.
3 Press @ or # to select the mode you want to
set.
For best results, start with “SPEAKERS setting mode”
and make your initial adjustments in the order
described below.
The current settings are displayed automatically.
• DTS-ES ON/OFF setting mode (page 17) (VSX-
D810S/D850S only)
Use to turn the DTS-ES (surround back) channels
ON or OFF (for DTS discs only).
• SPEAKERS (Front, Center, Surround) setting
mode (page 17)
• Optical digital input 3 setting (VSX-D810S/D850S
only) (page 20)
Use to specify the input assigned to this optical digital
input.
• Optical digital input 4 setting (VSX-D850S only)
(page 21)
Use to specify the input assigned to this optical digital
input.
Use to specify the size and type of speakers you have
connected.
• SPEAKERS (Surround Back) setting mode (page
4 Press % or fi to select the setting you want.
17) (VSX-D810S/D850S only)
The setting is entered automatically.
Use to specify the size and type of surround back
speaker you have connected or if you have con-
nected a subwoofer here.
5 Repeat steps 3 and 4 to set other surround
modes.
•
SUBWOOFER ON/PLUS/OFF setting mode (page 18)
Use to specify if the subwoofer is set to on, plus or off.
MEMO:
• Crossover frequency setting mode (page 18)
Use to determine which frequencies will be sent to
the subwoofer (or “Large” speakers if you don’t have
a subwoofer).
Press ENTER to exit the setting mode.
The setting mode is automatically exited if no operation
is performed within 20 seconds.
16
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
DTS-ES ON/OFF setting mode (VSX-
D810S/D850S only)
This setting allows you to hear surround back channels
on DTS disc regardless of whether the disc itself is a 5.1
Ch disc or a 6.1 Ch disc. Naturally you need to hook up
surround back speakers (see p. 13) and set them properly
(see below on this page) in order to hear surround back
channels. If you choose ON you will hear surround back
channels with DTS discs. If you choose OFF you will not.
Choose DTS-ES ON or OFF by using the %
or fi buttons.
MEMO:
•
If you choose none for the surround back speakers setting
later on this page you won’t be able to select ON here.
• You’ll only get surround back channel sound when
the receiver is in STANDARD mode (see p. 27-29),
DTS-ES is set to ON and the disc is a DTS 5.1/6.1
channel disc.
MEMO:
If the cone size (diameter) of the speaker is larger than 5
inches, please set to Large.
SPEAKERS (Surround Back) setting
mode (VSX-D810S/D850S only)
SPEAKERS (Front, Center, Surround)
setting mode
This setting establishes the size of the speaker connected
to the surround back terminal (VSX-D810S/D850S only).
You can choose a surround back speaker and its size or
you can choose to hook a subwoofer to this terminal.
This setting establishes the size and configuration of the
speaker system you have connected. So, for example,
here you set whether you have connected surround
speakers or not, and how big they are. Selecting “Large”
or “Small” will determine how much bass is sent by the
receiver to the speakers being set.
In the display, “F”, “C”, and “S” refer to front, center,
and surround speakers respectively. Speaker size is
denoted as “L” for large speakers, “S” for small
Switch the surround back speaker setting
mode according to the size of the speaker
you hooked up. Use the % or fi buttons.
The configurations shown below will appear in the
display on the front of the receiver. Choose one.
Cycle through the different possibilities until you find
the one that matches your set up.
speakers, and “ ” (asterisk) if no speaker is connected.
*
If you select SB SUBWF here you can hook a
subwoofer up to the surround back speaker terminals
(see p.13). In this case the terminals will be used for
this “passive subwoofer” and no surround back
sound will come from these terminals.
Choose a speaker setting mode according to
the speakers you hooked up. Use the % or fi
buttons.
The configurations shown below will appear in the
display on the front of the receiver. One of them
should match your speaker set up. Cycle through the
different possibilities until you find the one that
matches your set up.
Press # to advance to the next receiver setting, and
press @ to return to a previous receiver setting.
Press # to advance to the next receiver setting, and
press @ to return to a previous receiver setting.
MEMO:
• You can only set the surround back speaker to large if
the surround speakers are set to small.
• If you choose none for surround speakers (see
previous setup) you won’t be able to select any
surround back speakers either.
17
• If you choose A+B speaker systems no sound is heard
from the “passive subwoofer”.
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
SUBWOOFER ON/PLUS/OFF setting
mode
LFE attenuator setting mode
Dolby Digital and DTS audio sources include ultra-low
bass tones. Set the LFE attenuator as needed to prevent
the ultra-low bass tones from distorting the sound from
the speakers.
Sets whether the SUBWOOFER is used or not. Also, when
used you have the option to use the “PLUS” setting.
Press % or fi to select subwoofer ON, PLUS
or OFF.
Press % or fi to set the attenuation level (0
dB, 10 dB or ** dB(∞)).
0 dB
10 dB
MEMO:
• The initial setting is “ON”.
∞ (display "**")
• Setting the front speaker size to “Small” in the
SPEAKERS setting mode automatically locks the
subwoofer in the “ON” position.
MEMO:
• The initial setting is “0 dB”.
• Use the PLUS for extra bass. When you use PLUS
you will get the bass sounds from the subwoofer
even if the front speakers are set to “Large”.
• If you select “OFF” in this setting you won’t be able to
select subwoofer in the surround back speaker
setting above.
• When ∞ is selected (**appears in the display), LFE
is not available.
Low cut filter ON/OFF setting mode
Turn the low cut filter ON when distorted sound is
output through the subwoofer.
Crossover frequency setting mode
Press % or fi to select low cut filter ON or
OFF.
Crossover frequency is the point where the receiver
divides the high and low sounds (the frequencies)
between the speakers. Since most smaller speakers can’t
handle deep bass tones, this setting allows you to send
those sounds to the subwoofer (or speakers set to
“Large” if you don’t have a subwoofer) instead of the
speakers set to “Small” in your system. Choose the point
at which you want the frequency routed to the
subwoofer (or “Large” speakers).
MEMO:
• The initial setting is “OFF”.
• If the SUBWOOFER is set to “OFF” in the
SUBWOOFER ON/OFF setting mode, the low cut
filter cannot be set.
FRONT speakers distance setting mode
We recommend setting this to 200 Hz if smaller
bookshelf-type speakers are used for your “Small”
speakers.
Sets the distance from the FRONT speakers to the
listening position.
Press % or fi to set the distance of the
FRONT speakers from the main listening
position (within a 30 foot range).
Press % or fi to specify the crossover
frequency for your small speakers (100 Hz,
150 Hz or 200 Hz).
100Hz
150Hz
MEMO:
• The initial setting is 10 ft.
• One step equals about 1ft.
200Hz
100 Hz
CENTER speaker distance setting mode
Sends bass frequencies below 100 Hz to the subwoofer
(or “Large” speakers).
150 Hz
Sends bass frequencies below 150 Hz to the subwoofer
(or “Large” speakers).
200 Hz
Sets the distance from the CENTER speakers to the
listening position.
Press % or fi to set the distance of the
CENTER speaker from the main listening
position (within a 30 foot range).
Sends bass frequencies below 200 Hz to the subwoofer
(or “Large” speakers).
MEMO:
MEMO:
• The initial setting is 10 ft.
• The initial setting is “100 Hz”.
• When “C ” is selected in SPEAKERS setting mode,
the Center distance cannot be set.
• One step equals about 1 ft.
• If all speakers (front, center, and surround) are set to
“Large” in SPEAKERS setting mode, crossover
frequency cannot be set because there are no “Small”
*
18
speakers (***appears in the display).
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
SURROUND speakers distance
setting mode
Dynamic range control setting mode
Dynamic range is the difference between the loudest and
softest sounds in any given signal. The dynamic range
control helps you play back sounds so the quieter sounds
are audible yet the louder sounds don’t get distorted. It
does this by compressing the dynamic range. When
watching a movie at low volume, setting this function
enables low level sounds to be heard more easily but you
won’t be jolted by louder sounds.
Use to set the SURROUND speakers distance. Like the
CENTER speaker position, the SURROUND speakers
may be set in a location closer or farther to your main
listening position than the FRONT speakers. Set the
distance of the SURROUND speakers accurately to hear
sounds coming from both FRONT and SURROUND
speakers at the same time.
Press % or fi to set the dynamic range control
(OFF, MAX, or MID).
Press % or fi to set the distance of the
SURROUND speakers from the main
listening position (within a 30 foot range).
MEMO:
• The initial setting is “OFF”.
MEMO:
• When the volume level is increased, set to OFF.
• For listening enjoyment at low volumes, set to “MAX”
for maximum dynamic range compression.
• Dynamic range control is effective only when a Dolby
Digital signal is being played back.
• The initial setting is 10 ft.
• When “S ” is selected in SPEAKERS setting mode,
*
the SURROUND distance cannot be set.
• One step equals about 1 ft.
SURROUND BACK speaker distance
setting mode (VSX-D810S/D850S
only)
Dual mono setting
The dual mono setting can only be used when listening to
Dolby Digital discs that have dual mono software encoded
in them. As of now these are not that widely used. With
this setting you can choose which channel in the dual
mono setting you want to listen to. Thus, it is useful for
soundtracks that have one language on one channel and a
different language on the other. Remember you can only
use this setting if you have Dolby Digital software with this
feature and want to isolate one of the channels therein.
Use to set the SURROUND back speaker distance. Like
the SURROUND speakers, the SURROUND BACK
speakers may be set in a location closer or farther to
your main listening position than the FRONT speakers.
Set the distance of the SURROUND speakers accurately
to hear sounds coming from both FRONT and
SURROUND speakers at the same time.
There are two different ways to route the sound in the dual
mono setting, one is with Dolby Digital mode on, the other
with Dolby Digital mode off. If Dolby Digital mode is
switched on, the ch1 setting will play channel 1 through
your center speaker. The ch2 setting will play channel 2
through your center speaker. With Dolby Digital mode off,
the dual mono sound routing is as follows: In the ch1
setting your will hear channel 1 out of both front speakers.
In the ch2 setting you will hear channel 2 out of both
speakers. In the L. c1 R. c2 setting the speakers will play
the soundtrack independently of each other. The left front
speaker will play channel 1 and the right front speaker will
play channel 2.
Press % or fi to set the distance of the
SURROUND speakers from the main
listening position (within a 30 foot range).
MEMO:
• The initial setting is 10 ft.
• When “SB ” is selected in SPEAKERS setting mode,
*
the SURROUND BACK distance cannot be set.
• One step equals about 1 ft.
Press % or fi to cycle through the possible
DUAL MONO settings.
L. c 1 R. c 2
ch2
ch1
MEMO:
• The default setting of this feature is ch1.
19
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Component input 1 setting
Optical digital input 1 setting
Tells the receiver What (DVD player, etc.) is connected to Here you tell the receiver what component you have
this input.
hooked up to the optical input jack 1.
Press % or fi to select the component setting
(DVD, TV, VCR or OFF).
Press % or fi to select the optical digital
input 1 (DVD, TV, CD, CD-R, VCR, or OFF).
After you assign a component to this digital jack
whenever you select that component, for example a
CD player, the receiver will automatically change to
the digital input setting. You can see this in the
DIGITAL/ANALOG indicator on the front of the
receiver.
MEMO:
• The initial setting is “DVD”.
Component input 2 setting
MEMO:
Tells the receiver What (TV, player etc.) is connected to
this input.
• The initial setting is “CD”.
Press % or fi to select the component setting
Optical digital input 2 setting
(TV, VCR, OFF or DVD).
Here you tell the receiver what component you have
hooked up to the optical input jack 2.
MEMO:
• The initial setting is “TV”.
Press % or fi to select the optical digital
input 2 (DVD, TV, CD, CD-R, VCR, or OFF).
Multi Channel External Decoder
Surround Back 1ch/2ch setting (VSX-
D810S/VSX-D850S only)
After you assign a component to this digital jack
whenever you select that component, for example a
CD player, the receiver will automatically change to
the digital input setting. You can see this in the
DIGITAL/ANALOG indicator on the front of the
receiver.
You only need to make this setting if you are using a
multi channel external decoder with your DVD player. If
you aren’t just ignore this setting.
Press % or fi to select the channel setting.
Select 1ch if your DVD is outputting 6.1
sound (the surround back channel is mono)
or select 2ch if your DVD is outputting 7.1
sound (the surround back channel is stereo).
MEMO:
• The initial setting is “CD-R”.
Optical digital input 3 setting (VSX-
D810S/VSX-D850S only)
Coaxial digital input setting
Here you tell the receiver what component you have
hooked up to the optical input jack 3.
Here you tell the receiver what component you have
hooked up to the coaxial digital input jack.
Press % or fi to select the optical digital
input 2 (DVD, TV, CD, CD-R, VCR, or OFF).
Press % or fi to select the coaxial digital
input (DVD, TV, CD, CD-R, VCR, or OFF).
After you assign a component to this digital jack,
whenever you select that component, for example a
CD player, the receiver will automatically change to
the digital input setting. You can see this in the
DIGITAL/ANALOG indicator on the front of the
receiver.
After you assign the component to this digital jack
whenever you select that component, for example a
CD player, the receiver will automatically change to
the digital input setting. You can see this in the
DIGITAL/ANALOG indicator on the front of the
receiver.
MEMO:
• The initial setting is “TV”.
MEMO:
• The initial setting is “DVD”.
20
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
3 Press TEST TONE to output the test tone.
Optical digital input 4 setting (VSX-
D850S only)
The test tone is output in the following order.
VSX-D710S
Here you tell the receiver what component you have
hooked up to the optical input jack 4.
FL
CT
SL
FR
SR
SW
Press % or fi to select the optical digital
input 2 (DVD, TV, CD, CD-R, VCR, or OFF).
VSX-D810S/D850S
After you assign a component to this digital jack
whenever you select that component, for example a
CD player, the receiver will automatically change to
the digital input setting. You can see this in the
DIGITAL/ANALOG indicator on the front of the
receiver.
FL
CT
FR
SR
SW
SL
SB
• Test tone is only output in Dolby/DTS modes. The
test tone sequence corresponds to the speaker setting
mode.
MEMO:
• The initial setting is “VCR”.
• The digital out signal corresponds to the selected
input function (for example, DVD).
4 Adjust speaker levels so that you hear the
test tone at the same volume from each
speaker when seated in the main listening
position.
• If a speaker is deselected in the speaker setting mode
(see p. 17) then no test tone will be output for that
speaker.
• The channel level range is 10 dB.
• Levels can be set for each surround mode.
Setting the Volume Level of
Each Channel (adjusting the
speaker volume balance)
Use to set the relative volume of each channel.
5 Press TEST TONE to turn off the test tone.
MEMO:
• Since the SUBWOOFER transmits an ultra-low
frequency its sound may seem quieter than it actually
is.
SOURCE
RECEIVER
• The speaker volume can be adjusted without
outputting the test tone by pressing CH LEVEL or
CH SELECT button.
DVD
RCV
TV
VCR
CD-R
TVC
MULTI CONTROL
TUN
CD
2
3
ATT
6
1
MIDNIGHT
5.1 / 7.1
5
4
• Initial setting is 0 dB.
EFFECT
8
0
9
DISC
7
10
• You can set each sound mode individually and these
settings are completely independent of each other.
The sound modes you can set include DSP, stereo,
DVD 7.1 Ch and 2/DTS, as explained in steps
above. However, you can only use the test tone
feature when setting 2/DTS.
ENTER
DTV INFO MPX/RETURN D.ACCESS
GUIDE
8
7
3
¶
BAND
CLASS
DTV ON/OFF DTV MENU
1
¡
4
¢
2
/DTS
DSP
TEST TONE SIGNAL SELECT
1
3,5
2
CH SELECT
LOUDNESS
CH LEVEL
FUNCTION
MUTING
CH SELECT
FL DIMMER
TUNE
SETUP
ST
ST
4
ENTER
TUNE
CHANNEL
VOLUME
MASTER VOLUME
MENU
TVFUNC
TV
TV CONTROL
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
1 Press 2/DTS.
2 Press MASTER VOLUME + or – to adjust the
volume to an appropriate level.
21
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays & Controls
05
Front Panel
(VSX-D710S DVD5.1CH button)
7
1
2
3
4 5
6
8
9 0 -
~
=
N∫m-Û˘,?∫
1
@
= TONE button
*
&
^
%
$
#
(
!
1 STANDBY indicator
This button allows you to activate the BASS &
TREBLE controls. To adjust the BASS and/or TREBLE
use the MULTI JOG DIAL. Tone can only be used in 2
channel stereo sound mode. The tones controls have
no effect on the B speaker system.
Lights when the receiver is in standby mode (note
that the receiver consumes a small amount of power
(1W) in standby mode).
2
STANDBY/ON button
Switches the receiver between on and standby (note
that the receiver consumes a small amount of power
(1W) in standby mode).
~ MULTI JOG dial
You can use this dial for two purposes. Firstly, in
normal mode turn it to select a source component.
Secondly, use it to adjust the BASS and/or TREBLE
levels when the TONE button has been activated (as
explained above).
3 STATION (+/–) buttons (see pages 32-33)
Selects station memories when using the tuner.
4 TUNING (+/–) buttons (see pages 32-33)
Selects the frequency when using the tuner.
5 DIRECT button
! MASTER VOLUME
Use to set the overall listening volume.
@ VIDEO INPUT jacks
Connect a video camera, video game system, etc. to
the VIDEO INPUT jacks (refer to page 10).
# MIDNIGHT button (see page 31)
Use when listening to movie soundtracks at low volume.
This feature will enable you to hear quiet sounds and
not get jolted by loud or sudden sound effects.
$ SPEAKERS button
Use to switch DIRECT playback on or off. This mode
bypasses the tone controls, channel levels, 2/DTS
and DSP modes for the most accurate reproduction of
a program source.
6 MONITOR button
Press to switch tape monitoring on/off.
7 DIGITAL NR button (VSX-D810S/D850S)
Switches the DIGITAL NR on or off .
DVD5.1CH button (VSX-D710S) (see page 31)
On the VSX-D810S/D850S use this button to
switches the DIGITAL NR on or off. On the VSX-
D710S this button switches between DVD5.1CH
input and regular DVD input.
Use to switch the speaker system A = B = A+B =
off. In B and A+B speaker modes you hear only 2 channel
stereo sound.
% MPX button (see page 32)
lf the TUNED or STEREO indicators don't light when
tuning to an FM station because the signal is weak,
press the MPX button to switch the receiver into
mono reception mode. This should improve the
sound quality and allow you to enjoy the broadcast.
^ BAND button (see page 32-33)
Press to select the AM or FM band.
& MEMORY button (see page 33)
Press to memorize a station for recall using the
STATION (+/–) buttons.
8 DSP MODE button (see page 28, 30)
Use to switch between the various DSP modes
available (HALL1, HALL 2, JAZZ, DANCE,
THEATER1, THEATER 2, 6CH STEREO [VSX-
D810S/D850S only]) and DSP off. Use this
button to create different surround sound effects from
any stereo source.
9 Remote sensor
Receives the signals from the remote control.
0 SIGNAL SELECT button (see page 29)
Use to select an analog or digital or AUTO (VSX-
D810S/D850S only) signal.
- 2/DTS button (see pages 27, 29)
Use to switch between the various Dolby/DTS
surround modes.
* CLASS button (see pages 33)
Switches between the three banks (classes) of station
memories.
( PHONES jack
22
Use to connect headphones but this does not switch
the speakers off.
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays & Controls
Display
4
9
0
=
1
3
5
-
2
6 7 8
SB
DSP
DNR
ATT
DIRECT
DIGITAL
PRO LOGIC
MONITOR
SP AB TUNED
STEREO
MONO
SIGNAL SELECT
DIGITAL DTS
ANALOG DIGITAL
MIDNIGHT
LOUDNESS
dB
@
!
~
9 DIRECT indicator
1 SIGNAL SELECT indicators
Lights when source DIRECT is in use. This function
bypasses all tone, channel levels, DSP and Dolby
Surround effects.
MIDNIGHT indicator
Lights when MIDNIGHT listening mode is in use.
LOUDNESS indicator
Lights when the LOUDNESS is on. LOUDNESS is
used to boost the bass and treble when listening at
low levels.
Light to indicate the type of input signal assigned for
the current component (see “Front Panel“, 0
SIGNAL SELECT). When the AUTO setting is being
used on VSX-D810S & VSX-D850S receivers a set of
brackets will appear around the SIGNAL SELECT
indicators.
2DIGITAL : Lights when a DOLBY DIGITAL
signal is played.
DTS: Lights when a source with DTS audio signals is
played.
0 SPEAKER indicator
ANALOG : Lights when an analog signal is selected.
DIGITAL : Lights when a digital audio signal is selected.
[ ]: Lights when the AUTO setting is selected. (VSX-
D810S/D850S only)
Shows if the speaker system is on or not. SP 3A
(and/or) B means speakers are switched on. SP 3
means speakers are switched off.
- MONITOR indicator
Lights when MONITOR is selected to hear a
recording as it's being made (see page 34).
= TUNER indicators
2 DTS indicator
Lights when DTS mode is being used.
3 2DIGITAL indicator
When the 2(DOLBY)/DTS mode of the receiver is
on, this lights to indicate playback of a Dolby Digital
signal. However, 2PRO LOGIC lights during 2
channel playback of Dolby Digital.
MONO:
Lights when the mono mode is set using the
MPX MODE button.
TUNED:
Lights when a broadcast is being received.
STEREO:
Lights when a stereo FM broadcast is being received
in auto stereo mode.
4 2PRO LOGIC indicator
When the 2(DOLBY)/DTS mode of the receiver is
on, this lights to indicate playback of a Dolby Pro
Logic source.
5 DSP indicator
~ MASTER VOLUME LEVEL
Shows the overall volume level. Volume level is
maintained even when the power is off. ---dB
indicates the minimum level, and 0dB indicates the
maximum level.
Lights when any Advanced Theater or DSP mode is
selected.
6 Surround Back indicator (VSX-D810S/D850S only)
Lights when most Surround Back channel flag encoded
(6.1channel) software is playing. (With some Surround
Back channel software the surround back indicator
won’t light because there is no flag encoded in the
software.) If you play DTS 5.1/6.1 channel software
surround sound will be heard whether it is encoded
with a surround back channel flag or not.
7 OVERLOAD indicator
• Depending on the level settings you make for
individual channels, the MAX level can range
between –10dB and 0dB.
! DNR indicator (VSX-D810S/D850S only)
Lights when the digital noise reduction is on. Use to
reduce extraneous noise. It can be used with any
sound mode.
This lights when an analog signal is too strong (the
SIGNAL SELECT needs to be on ANALOG). It
indicates the sound is distorting and the input signal
should be reduced.
@ CHARACTER display
Shows the radio frequency or function (DVD/LD,
CD, etc.) receiver is using.
8 ATT indicator
Lights when ATT is used to attenuate (reduce) the
level of the input signal (can only be used in
ANALOG mode).
23
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays & Controls
MIDNIGHT (see page 31)
Remote Control
(VSX-D710S/D810S)
Use to put receiver in MIDNIGHT mode. To use first
press the RCV button then operate this button.
5.1 Ch (VSX-D710S) 7.1Ch (VSX-D810S/D850S)
(see page 31)
When the DVD/LD or DVD 5.1/7.1 Ch function is
selected each press switches the DVD/LD input
between DVD/LD and DVD 5.1/7.1 Ch. To use first
press the RCV button then operate this button.
ATT
#
@
SOURCE
RECEIVER
1
2
3
DVD
CV
TV
VCR
CD-R
TVC
MULTI CONTROL
TUN
CD
When the overload indicator lights use this button to
attenuate (lower) the level of an analog input signal
and prevent distortion. To use first press the RCV
button then operate this button.
EFFECT +/– buttons (see page 30)
Use to add or subtract the amount of effect in
different DSP sound modes (except 6 Ch Stereo) or
advanced listening modes.
2
3
ATT
6
1
MIDNIGHT
5.1 / 7.1
5
4
EFFECT
4
8
0
9
DISC
7
10
ENTER
!
DTV INFO MPX/RETURN D.ACCESS
GUIDE
8
7
3
DTV ON/OFF DTV MENU
¶
BAND
CLASS
5
1
¡
4
¢
2
/DTS
DSP
SIGNAL SELECT
TEST TONE
6
7
8
To use first press the RCV button then operate these
buttons.
CH SELECT
LOUDNESS
CH LEVEL
FUNCTION
MUTING
FL DIMMER
TUNE
SETUP
5 THE FOLLOWING BUTTONS ARE BOTH
CONTROLS FOR OTHER COMPONENTS (LIKE
A DVD PLAYER) AND DEDICATED TUNER
CONTROLS. THE TUNER CONTROLS ARE
EXPLAINED HERE. YOU CAN USE THEM
AFTER YOU HAVE PUSHED THE TUNER MULTI
CONTROL BUTTON.
ST
ST
ENTER
~
=
TUNE
CHANNEL
VOLUME
MASTER VOLUME
MENU
TVFUNC
TV
BAND button (see pages 32, 33)
Use to switch between the AM and FM band when in
TUNER mode.
CLASS button (see pages 33)
Use to switch between the three banks (classes) of
station memories.
-
0
9
TV CONTROL
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
MPX/RETURN button (see page 32)
Use to switch between auto stereo and mono
reception of FM broadcasts. If the signal is weak then
switching to MONO will improve the sound quality.
Also, this is the pause button for CDs, tapes, DVDs,
etc.
D. ACCESS button (see page 32)
Use to directly access a radio station by pressing the
number of the station you want.
DTV INFO button
Use to bring up information screens on a digital TV.
DTV MENU button
Use to bring up menus on a digital TV.
DTV ON/OFF button
Use to turn a digital TV on/off.
1 SOURCE button
Use to turn on/off other components connected to
the receiver.
2 MULTI CONTROL buttons
Use to put the receiver/remote control in the stated
mode.
For other equipment controls, see Controlling the
Rest of Your System on pages 35-49.
3 RCV button (see page 16)
Use this button when setting up the surround sound
for the receiver. Also press it if you want to use
special features attached to some of the number
buttons, for example MIDNIGHT, 5.1/7.1, or ATT.
4 NUMBER/MODE buttons
GUIDE button
Use to bring up the guides on a digital TV.
Use the number buttons to select the radio frequency
in tuner DIRECT ACCESS (see page 32) mode or the
tracks in CD, DVD mode etc.
Also, buttons marked with the following names have
special functions. If you try to use one of these
functions but the display flashes it means that
function cannot be used in the current mode (for
example DSP modes cannot be used when 5.1 Ch
setting is on).
24
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays & Controls
6 2/DTS button (see pages 27, 29)
Use to put receiver in DOLBY DIGITAL, DOLBY
SURROUND and DTS modes.
0 MENU button
Use to access different menus associated with your
DVD player.
DSP button (see pages 28, 30)
- MASTER VOLUME +/– buttons
Use to put receiver in one of the DSP modes.
TEST TONE button (see page 21)
Use to set the overall listening volume.
= CHANNEL +/– buttons
Use to sound the TEST TONE when setting up the
surround sound of the receiver (the 2/DTS mode
must be on).
Use to select the stations of memorized radio
frequencies. Also use to skip tracks backward or
forward on CDs, DVDs, etc.
SIGNAL SELECT (see page 29)
~ @ # % fi ( TUNE/ST +/–) & ENTER buttons (see
pages 16-21)
Use to select the proper signal (analog, digital) for the
source your are inputting. On the VSX-D810S &
VSX-D850S receivers there is an AUTO setting. In
this setting the receiver will automatically switch
between the analog and digital signals according to
what is being input. If both signals are input the
AUTO setting will choose the digital one. This setting
is convenient as the receiver will always choose the
best or appropriate signal.
Use these arrow buttons when setting up your
surround sound system (see pages 16-21). These
buttons are also used to control DVD menus/options
and for deck 1 of a double cassette deck player. The
TUNE/ST +/– buttons can be used to find radio
frequencies and preset stations, respectively.
! DISC (ENTER) button
Use to select a disc an in multi-CD player. To use
first press the RCV button then operate this button.
7 CH SELECT button (see page 21)
Use to select a speaker when setting up the surround
sound of the receiver. To use first press the RCV
button then operate this button.
@ RECEIVER (POWER) button
This switches between STANDBY mode and power
ON for this receiver.
# LED DISPLAY (see pages 35-40)
CH LEVEL +/– (see page 21)
Use to set up the levels of the surround sound of the
receiver. To use first press the RCV button then
operate this button.
This display flashes when a command is sent from
the remote control to the receiver. It also flashes at
other times, for example when teaching the receiver
preset codes, with specific meanings.
FUNCTION button
Use to select the playback or recording source. This
button lets you cycle through the different functions
of the receiver in the following order: CD, TUNER,
AUX, CDR/TAPE, VCR/DVR, DVD/LD, DVD 7.1 Ch,
VIDEO, and TV/SAT (VSX-D810S/D850S).
CD, TUNER, AUX, CDR/TAPE, VCR/DVR, DVD/LD,
VIDEO, and TV/SAT (VSX-D710S).
8 LOUDNESS button
Use to switch on the loudness. This feature is useful
for getting good bass and treble sounds listening at
low volumes.
FL DIMMER button
Use this button to make the fluorescent display (FL)
dimmer or brighter. There are three brightness
settings as well as an off setting.
SETUP button (see page 35-40)
Use this button when setting up the remote control to
control other components.
MUTING button
Use to mute the sound or restore the sound if it has
been muted.
9 THE FOLLOWING BUTTONS ARE DEDICATED
TV CONTROL. THEY ARE ONLY USED FOR
CONTROLLING YOUR TV.
TV FUNC button
Use select the TV function.
TV button
Use to turn on/off the power of the TV.
TV VOLUME +/– buttons
Use to adjust the volume on your TV.
25
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays & Controls
Remote Control
(VSX-D850S)
LCD Display
(VSX-D850S only)
2
3
4
5
6
7
SOURCE
RECEIVER
SETUP
SEARCH
LEARN
ERASE
SEARCH
BY BAND
SETUP
SEARCH
SEARCH
LEARN
ERASE
BY BRAND
1
DVD
RCV
TV
VCR
CD-R
TVC
MULTI CONTROL
TUN
CD
2
3
ATT
6
1
MIDNIGHT
5.1 / 7.1
5
4
EFFECT
8
8
0
9
7
10
DISC
ENTER
1 LCD display
DTV INFO MPX/RETURN D.ACCESS
GUIDE
8
2 SETUP
7
3
DTV ON/OFF DTV MENU
¶
BAND
CLASS
Indicates that the remote is in Setup mode.
3 SEARCH
1
¡
4
¢
2
/DTS
DSP
SIGNAL SELECT
TEST TONE
Indicates that the remote is in preset code Search
mode.
4 SEARCH BY BRAND
CH SELECT
LOUDNESS
CH LEVEL
FUNCTION
MUTING
FL DIMMER
TUNE
SETUP
Indicates that the remote is in preset code Search by
brand mode.
ST
ST
ENTER
5 LEARN
TUNE
Indicates that the remote is in Learning mode and
ready to learn signals from other remote controllers.
6 ERASE
Indicates that the remote is in Erase mode.
7 Transmit icon
CHANNEL
VOLUME
MASTER VOLUME
MENU
TVFUNC
TV
Blinks to indicate the remote is transmitting control
signals.
TV CONTROL
8 CHARACTER display
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
Shows preset codes and other information.
26
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Modes
06
Learning about the Sound Modes
The sound modes are explained here.
There are two cinema modes: 2STANDARD, and ADVANCED THEATER. These are designed to be used with multi
channel surround sound audio/visual sources (like DVDs and LDs). Intrinsic to home theater, these modes can deliver
realistic and powerful surround sound that recreates the movie theater experience. You may need to experiment with
them to see which settings suit your home system and personal tastes.
The DSP and STEREO modes are designed to be used with music sources but some DSP modes are also suited for
film soundtracks. Again, try different settings with various soundtracks to see which you like.
2 (STANDARD) mode
This mode is for pure decoding of Dolby Digital, DTS and Dolby Surround sources. No special effects are added. It is
good for enjoying movies that have been recorded in Dolby Digital, DTS or Dolby Surround.
You can identify Dolby Digital software by the 1or
marks. Most Dolby Surround software is
marked 3, but unmarked software may also incorporate Dolby Surround.
ADVANCED THEATER modes
MUSICAL
Simulates the acoustic environment of a large concert hall and is suitable for music or musical sources marked 1
R
(
) or
.
DRAMA
Simulates the relaxed environment of a classic medium size movie theater, and is suitable for watching dramas on
R
sources marked 1(
) or
.
ACTION
Simulates the acoustic environment of a large modern movie theater. You can enjoy the power and dynamics of
R
motion picture audio which is best used with action movies on sources marked 1,
or
.
EXPANDED (VSX-D710S)
This mode is especially designed to give sound depth to stereo sources. The overall effect builds a dynamic and broad
sound space, allowing two-channel (stereo) signals to faithfully imitate a five speaker sound. Use with Dolby Pro
Logic for a stereo surround effect. You can also use with Dolby Digital sources for a wider stereo field than
STANDARD mode.
5/6-D THEATER (VSX-D810S/D850S)
This mode is especially designed to give sound depth to stereo sources. The overall effect builds a dynamic and
broad sound space, allowing two-channel (stereo) signals to faithfully imitate a six speaker sound. The mode should
DOLBY SURROUND
be used in conjunction with Dolby Pro Logic for sources bearing the
mark.
27
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Modes
DSP modes
The DSP (Digital Signal Processing) modes allow you to transform your living room into a variety of different sonic
environments when playing standard (two-channel) stereo sources, Dolby Pro Logic sources, and Dolby Digital
sources. DSP modes do not work when the speakers are off.
HALL 1
Simulates the acoustic environment of a large, wooden concert hall. Complex delay of reflected sounds coupled with
reverberation effects create the dynamic and beautiful sound characteristics of an orchestra performing in a concert
hall, making it suitable for classical music
HALL 2
Simulates the acoustic environment of a concert hall with stone walls. The rich reverberations and natural fullness of
the sound create the auditory impression of being in a concert hall, also making it suitable for classical music.
JAZZ
Simulates the acoustic environment of a jazz club. Less delay on the reflected sounds emphasizes the sensation of
hearing a live band.
DANCE
Simulates the acoustic environment and strong bass sound of a dance club. A short delay on the reflected sounds
emulates the raw power of the dance music.
THEATER 1
Adjusts the delay of the reflected sound to simulate the acoustic environment of a medium sized movie theater.
THEATER 2
Simulates the acoustic environment of a theater while maintaining proper localization of each channel.
5/6Ch STEREO (VSX-D810S/D850S)
This mode reproduces stereo sound but uses all the speakers in the system to induce a rich, all-around sound.
MEMO:
• When using 96 kHz PCM playback, STANDARD, ADVANCED THEATER, and DSP sound modes are not
available.
28
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Modes
Switching ANALOG/DIGITAL
Signal Input
Playing Sources with Dolby
Digital or DTS Sound
When you select a function (for example CD) that is
only hooked up by a digital connection, then the
ANALOG/DIGITAL signal input switch will
automatically choose digital for VSX-D810S/D850S. If
you have that function hooked up by both digital and
analog connections this switch lets you choose which to
listen to.
SOURCE
RECEIVER
2
3
DVD
RCV
TV
VCR
CD-R
TVC
MULTI CONTROL
TUN
CD
2
3
ATT
6
1
MIDNIGHT
5.1 / 7.1
5
4
EFFECT
8
0
9
DISC
7
10
ENTER
DTV INFO MPX/RETURN D.ACCESS
GUIDE
8
7
3
¶
SOURCE
RECEIVER
BAND
CLASS
DTV ON/OFF DTV MENU
1
¡
4
¢
2
/DTS
DSP
TEST TONE SIGNAL SELECT
DVD
RCV
TV
VCR
CD-R
TVC
MULTI CONTROL
TUN
CH SELECT
LOUDNESS
CH LEVEL
FUNCTION
MUTING
4
7
CD
5
FL DIMMER
TUNE
SETUP
2
3
ATT
6
1
MIDNIGHT
5.1 / 7.1
5
4
EFFECT
ST
ST
8
0
9
DISC
7
10
ENTER
ENTER
TUNE
DTV INFO MPX/RETURN D.ACCESS
GUIDE
8
7
3
¶
BAND
CLASS
DTV ON/OFF DTV MENU
CHANNEL
VOLUME
MASTER VOLUME
1
¡
4
¢
MENU
TVFUNC
TV
2
/DTS
DSP
TEST TONE SIGNAL SELECT
CH SELECT
LOUDNESS
CH LEVEL
FUNCTION
MUTING
1
FL DIMMER
SETUP
TV CONTROL
1 Press SIGNAL SELECT to select the input
signal corresponding to the source
component.
1 Turn on the power of the playback
component.
2 Turn on the power of the receiver.
Each press switches between ANALOG and DIGITAL
signal selection (VSX-D710S).
Be sure that the standby indicator turns off on the
front panel.
On the VSX-D810S & VSX-D850S receivers there is
an AUTO setting. In this setting the receiver will
automatically switch between the analog and digital
signals according to what is being input. If both
signals are input the AUTO setting will choose the
digital one. This setting is convenient as the receiver
will always choose the best or appropriate signal.
3 Press MULTI CONTROL buttons or the
FUNCTION button to select the source you
want to playback.
If the DIRECT FUNCTION is OFF you have to use
the FUNCTION button to select the source (see
p.39).
2 While SIGNAL SELECT is set to DIGITAL,
2DIGITAL lights when a Dolby Digital
signal is input, DTS lights when a DTS signal
is input.
4 Press SIGNAL SELECT to select DIGITAL.
(Refer to “Switching ANALOG/DIGITAL signal input”
on this page.)
5 Press 2/DTS to switch the Dolby/DTS mode
on.
MEMO:
• SIGNAL SELECT is fixed in the “ANALOG” position
for components not assigned to one of the digital
input jacks.
• This receiver can only play back Dolby Digital, PCM
(32kHz, 44kHz, and 48kHz [VSX-D810S & VSX-
D850S can play 96kHz]), and DTS, digital signal
formats. With digital signal formats other than these,
set SIGNAL SELECT to “ANALOG”.
6 Start playback of the component you
selected in step 1.
7 Press MASTER VOLUME (+/–) to adjust the
volume level.
MEMO:
• You can only hear the sound on DTS encoded discs if
the CD or LD player with DTS is digitally connected
to this receiver. If you play a DTS encoded disc
through analog connections you will only hear digital
noise, not the soundtrack. To prevent noise, you need
to make digital connections (Refer to page 6-7) and
set SIGNAL SELECT to “DIGITAL”.
• Some DVD players don’t output DTS signals. For
more details, refer to the instruction manual supplied
with your DVD player.
29
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Modes
MIDNIGHT
5.1 / 7.1
ATT
5
6
4
Selecting a Sound Mode
EFFECT
8
0
9
DISC
7
10
ENTER
To ensure the best possible surround sound, be sure to
complete the set up procedures described in “Setting Up
for Surround Sound” (starting on page 16) before using
the sound modes. This is particularly important when
using the 2(Dolby) surround mode.
DTV INFO MPX/RETURN D.ACCESS
GUIDE
8
7
3
¶
BAND
CLASS
DTV ON/OFF DTV MENU
1
¡
4
¢
2
/DTS
DSP
SIGNAL SELECT
TEST TONE
1
CH SELECT
LOUDNESS
CH LEVEL
FUNCTION
MUTING
FL DIMMER
SETUP
Surround operation
1 Switch the Dolby/DTS mode on and off by
pressing 2/DTS on the remote control or
2/DTS on the front panel.
SOURCE
RECEIVER
DVD
RCV
TV
VCR
CD-R
TVC
MULTI CONTROL
TUN
Each press changes the display as follows.
CD
1
2
3
ATT
6
1
MIDNIGHT
(VSX-D710S)
EFFECT +/–
5.1 / 7.1
5
4
STANDARD
MUSICAL
DRAMA
ACTION
EFFECT
8
0
9
DISC
7
10
ENTER
DTV INFO MPX/RETURN D.ACCESS
GUIDE
OFF EXPANDED
8
7
3
¶
BAND
CLASS
DTV ON/OFF DTV MENU
1
¡
4
¢
(VSX-D810S/D850S)
* STANDARD
2
/DTS
DSP
TEST TONE SIGNAL SELECT
CH SELECT
LOUDNESS
CH LEVEL
FUNCTION
MUTING
2
MUSICAL
5/6-D THEATER
DRAMA
ACTION
FL DIMMER
SETUP
OFF
1 Press RCV.
*When using DTS 5.1/6.1 ch discs in STANDARD
mode the display will change to “DTS-ES”. Naturally
the playback will still be 6.1 output.(VSX-D810S/
D850S)
This sets the remote to select the sound mode.
(You can skip this step when using the controls on
the receiver.)
2 Press DSP MODE to select the sound mode.
Each press changes the DSP mode as follows:
Refer to page 27 for more details about each
surround effect.
HALL 1
HALL 2
DANCE
JAZZ
MEMO:
6CH STEREO
(VSX-D810S
/D850S only)
THEATER 2
THEATER 1
• The effects of Dolby/DTS mode can be adjusted in
the range of 10 to 90 by pressing EFFECT +/– (the
default setting is 70). Also, the effect level can be set
in each ADVANCED THEATER mode by pressing the
EFFECT +/– button. The STANDARD mode cannot
be changed.
MEMO:
• The amount of effect of each DSP mode can be
adjusted in the range of 10 to 90 (the default setting
value is 70) by pressing EFFECT +/–.
• The DSP effects can’t be heard in 6 channel stereo
(VSX-D810S/D850S only).
• For VSX-D810S/VSX-D850S receivers, when the
surround back channel is set to off 6 channel stereo
becomes 5 channel stereo.
• For the VSX-D810S/VSX-D850S, when the surround
back channel is set to off in the speakers settings, 6-D
Theater becomes 5-D Theater.
ADVANCED THEATER mode ( Dolby/
DTS mode)
Switch on the Dolby/DTS mode by pressing the 2/DTS
button. When Dolby/DTS mode is ON, Dolby Pro Logic,
Dolby Digital and DTS, and signal processing is per-
formed automatically corresponding to the input signal.
Use this button to cycle through the various modes.
When the STANDARD mode is selected, DSP modes are
off.
30
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Modes
1 Press RCV.
DVD 5.1 ch./7.1 ch (5.1 ch for VSX-
D710S) input playback
This sets the remote to select the sound mode.
(You can skip this step when using the controls on
the receiver.)
If you want you can connect a component with 7.1
channel (5.1 channel for VSX-D710S) analog output to
enjoy surround sound playback. In this case the
surround sound will be externally decoded and then fed
into the receiver.
2 Press MIDNIGHT.
Each press switches MIDNIGHT listening mode on or
off.
MEMO:
SOURCE
RECEIVER
DVD/LD
MULTICONTROL
• The effect automatically adjusts according to the
DVD
CV
TV
VCR
CD-R
TVC
volume level.
MULTI CONTROL
TUN
CD
RCV
2
3
ATT
6
1
MIDNIGHT
5.1 / 7.1
5
4
5.1/7.1
EFFECT
8
0
9
7
10
DISC
ENTER
DTV INFO MPX/RETURN D.ACCESS
GUIDE
8
7
3
¶
BAND
CLASS
DTV ON/OFF DTV MENU
1
¡
4
¢
Playing other Sources
To switch on DVD 7.1 ch (5.1 ch for VSX-
D710S) mode press the DVD/LD MULTI
CONTROL button on the remote, then RCV,
then 5.1/7.1 button.
VSX-D710S only: On the main unit press the
DVD 5.1CH button to switch on 5.1 ch mode.
SOURCE
RECEIVER
2
3
DVD
RCV
TV
VCR
CD-R
TVC
MULTI CONTROL
TUN
CD
2
3
ATT
6
1
MIDNIGHT
5.1 / 7.1
5
4
EFFECT
8
0
9
DISC
7
10
ENTER
DTV INFO MPX/RETURN D.ACCESS
GUIDE
Press the 5.1/7.1 button on the remote to go
back to the DVD/LD mode. If you’re using
the main unit, choose any other function
with the MULTI JOG.
8
7
3
¶
BAND
CLASS
DTV ON/OFF DTV MENU
4
1
¡
¢
2
/DTS
DSP
TEST TONE SIGNAL SELECT
4
CH SELECT
CH LEVEL
FUNCTION
1 Turn on the power of the playback
component.
MEMO:
• When 5.1 ch/7.1 ch input is selected, Dolby mode,
DSP mode, SIGNAL SELECT, ATT, DIRECT, TONE,
MIDNIGHT mode, LOUDNESS and speakers B
cannot be operated.
• When 5.1 ch/7.1 ch input is selected, only the
volume level and channel levels can be set.
2 Turn on the power of the receiver.
Be sure that the standby indicator turns off on the
front panel.
3 Press MULTI CONTROL buttons or the
FUNCTION button to select the source you
want to playback.
MIDNIGHT Listening Mode
If the DIRECT FUNCTION is OFF you have to use
the FUNCTION button to select the source (see
p.39).
When listening at low volume, surround effects tend to
become less than satisfactory. Turn the MIDNIGHT
listening mode on to enjoy the effects of quality
surround sound even at low volumes. This mode allows
you to hear effective surround sound of movies at low
volume levels.
4 If necessary, press SIGNAL SELECT to select
the input signal corresponding to the source
component (see p.29).
5 Start playback of the component you
selected in step 1.
SOURCE
RECEIVER
DVD
CV
TV
VCR
CD-R
TVC
MULTI CONTROL
TUN
1
2
CD
2
3
ATT
6
1
MIDNIGHT
5.1 / 7.1
5
4
EFFECT
8
0
9
DISC
7
10
ENTER
DTV INFO MPX/RETURN D.ACCESS
GUIDE
8
7
3
¶
BAND
CLASS
DTV ON/OFF DTV MENU
1
¡
4
¢
31
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tuner
07
MPX mode
Finding a Station
If the TUNED or STEREO indicators don't light when
tuning to an FM station because the signal is weak, press
the MPX button to switch the receiver into mono
reception mode. This should improve the sound quality
and allow you to enjoy the broadcast.
The following steps show you how to tune in to FM and
AM radio broadcasts using the automatic (search) and
manual (step) tuning functions. If you already know the
exact frequency of the station you want to listen to, see
Tuning Directly to a Station on this page. Once you are
tuned to a station you can memorize the frequency for
recall later—see Memorizing Stations on page 33 for
more on how to do this.
Tuning Directly to a Station
Sometimes, you'll already know the frequency of the
station you want to listen to. In this case, you can simply
enter the frequency directly using the number buttons
on the remote control (this function is not available
using the front panel controls of the receiver).
SOURCE
RECEIVER
DVD
RCV
TV
VCR
CD-R
TVC
MULTI CONTROL
TUN
CD
1
2
3
ATT
6
1
MIDNIGHT
5.1 / 7.1
5
4
EFFECT
8
0
9
7
10
DISC
SOURCE
RECEIVER
ENTER
DTV INFO MPX/RETURN D.ACCESS
GUIDE
MPX
7
3
8
¶
DVD
RCV
TV
VCR
CD-R
TVC
BAND
CLASS
DTV ON/OFF DTV MENU
MULTI CONTROL
TUN
1
¡
4
¢
CD
2
/DTS
DSP
TEST TONE SIGNAL SELECT
1
4
2
2
3
ATT
6
1
MIDNIGHT
CH SELECT
LOUDNESS
CH LEVEL
FUNCTION
MUTING
5.1 / 7.1
5
4
FL DIMMER
TUNE
SETUP
EFFECT
8
0
9
DISC
7
10
ENTER
ST
ST
DTV INFO MPX/RETURN D.ACCESS
GUIDE
ENTER
8
7
3
¶
3
BAND
CLASS
DTV ON/OFF DTV MENU
3
TUNE
1
¡
4
¢
2
2
/DTS
DSP
TEST TONE SIGNAL SELECT
CHANNEL
VOLUME
MASTER VOLUME
CH SELECT
LOUDNESS
CH LEVEL
FUNCTION
MUTING
FL DIMMER
TUNE
SETUP
1 Press the MULTI CONTROL TUN button on
the remote control.
ST
ST
ENTER
On the receiver, use the MULTI JOG to select the
TUNE
tuner mode.
CHANNEL
2 Use the BAND button to change the band
(FM or AM), if necessary.
1 Press the MULTI CONTROL TUN button on
Each press switches the band between FM and AM
On the receiver, pressing the BAND button switches
between bands.
the remote control.
On the receiver, use the MULTI JOG to select the
tuner mode.
3 Tune to a station.
2 Press the BAND button to select either FM
Automatic tuning
or AM.
To search for stations in the currently selected band,
press and hold either the TUNE + or TUNE – button
for about a second. The receiver will start searching
for the next station, stopping when it has found one.
Repeat this step to search for other stations.
Each press switches the band between FM and AM.
On the receiver, pressing the BAND button switches
between bands.
3 Press D.ACCESS (DIRECT ACCESS).
Manual tuning
4 Use the number buttons to enter the
frequency of the radio station.
To change the frequency one step at a time, press the
TUNE + or TUNE – (%fi) buttons.
High speed tuning
Press and hold the TUNE + or TUNE – button for
high speed tuning, releasing the button once the
desired frequency is reached.
Example: To tune to 106.00 (FM), press 1 – 0 – 6 –
0 – 0
TUNED
STEREO
A
SP
MEMO:
• If you make a mistake while inputting the frequency,
press the D.ACCESS button twice to cancel the
frequency and start again.
32
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tuner
Memorizing Stations
Recalling Memorized Stations
If you often listen to a particular radio station, it's
convenient to have the receiver store the frequency for
easy recall whenever you want to listen to that station.
This saves the effort of manually tuning in each time.
The VSX-D710S/D810S/D850S can memorize up to 30
stations, stored in three banks, or classes, (A,B and C) of
10 stations each. When memorizing FM frequencies, the
receiver also stores the MPX setting (auto stereo or
mono, see p.32). The process for memorizing stations is
only possible from the controls on the front panel of the
receiver.
Having memorized up to 30 stations (see the previous
explanation for how to do this), preset stations can be
easily recalled.
SOURCE
RECEIVER
DVD
RCV
TV
VCR
CD-R
TVC
MULTI CONTROL
TUN
CD
1
3
2
3
ATT
6
1
MIDNIGHT
5.1 / 7.1
5
4
EFFECT
8
0
9
DISC
7
10
ENTER
DTV INFO MPX/RETURN D.ACCESS
GUIDE
8
7
3
¶
BAND
CLASS
DTV ON/OFF DTV MENU
4
4
3
1
¡
¢
2
2
/DTS
DSP
TEST TONE SIGNAL SELECT
CH SELECT
LOUDNESS
CH LEVEL
FUNCTION
MUTING
VSX-D710S
FL DIMMER
TUNE
SETUP
3
ST
ST
ENTER
TUNE
CHANNEL
VOLUME
MASTER VOLUME
MENU
2
3
2
1
1 Tune to a station you want to memorize.
VSX-D710S
See Finding a Station and Tuning Directly to a
Station, on pages 32 and this page, for more on how
to do this.
2 Press MEMORY.
The display shows a blinking memory class.
TUNED
STEREO
A
SP
1 Press the MULTI CONTROL TUN button on the
remote control.
3 Press CLASS to select one of the three
On the receiver, use the MULTI JOG to select the
tuner mode.
classes.
Repeatedly pressing this button cycles through the
three available classes, A, B and C.
2 Press CLASS to select the class in which the
station is stored.
4 Press STATION +/– to select the desired
Repeatedly pressing this button cycles through the
three available classes, A, B and C.
station memory number.
Pressing these buttons repeatedly cycles through the
10 available station memories in each class.
After choosing the location you want, the preset class
and number blink for about 5 seconds and the
receiver stores the station.
3 Use the ST +/– buttons to select the station
memory in which the station is stored.
Alternatively, recall the station memory using the
number buttons on the remote control.
Repeat steps 1 to 4 to memorize up to 30 stations.
MEMO:
• If the receiver is left disconnected from the AC power
outlet for a lengthy period, the station memories will
be lost and will have to be reprogrammed.
33
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a Recording
08
4 Start recording, then start playback of the
source component.
Making an Audio or a Video
Recording
MEMO:
The following steps show you how to make an audio or
a video recording from the built in tuner, or from an
audio or video source connected to the receiver (such as
a CD player or TV). Recordings can be made to a CD-
Recorder, cassette deck, MD, VCR, or DVR deck
connected to the CD-R/TAPE/MD, VCR or DVR in/out
connectors.
The receiver's volume, tone control (bass & treble)
loudness, and surround effects have no effect on the
recorded signal.
Record MONITOR
SOURCE
RECEIVER
You can listen to (monitor) the recording as it's being
made using the MONITOR button on the front panel (a
cassette deck would have to have a record monitor
function).
DVD
RCV
TV
VCR
CD-R
TVC
MULTI CONTROL
TUN
CD
2
3
ATT
6
1
MIDNIGHT
5.1 / 7.1
5
4
EFFECT
Press the MONITOR button to switch between the
recorded signal and the original source signal.
8
0
9
7
10
DISC
ENTER
DTV INFO MPX/RETURN D.ACCESS
GUIDE
8
7
CLASS
3
¶
BAND
DTV ON/OFF DTV MENU
1
¡
4
¢
2
/DTS
DSP
TEST TONE SIGNAL SELECT
CH SELECT
LOUDNESS
CH LEVEL
FUNCTION
MUTING
Making a Digital Recording
FL DIMMER
SETUP
1
The VSX-D710S has one optical digital output jack. The
VSX-D810S/D850S has one coaxial digital output jack
and one optical digital output jack. The quality of these
two types of connections is the same so you only need to
match the type of connection on this receiver with the
type of connection on your component. If you want to
make a digital recording from this receiver hook up the
optical output on this receiver to the optical input on the
digital component you want to record into. The source
component (like MD, CD, DVD, etc.) must be digital
also, of course, and hooked up to this receiver in a
digital manner. Make sure the analog/digital switch is set
to digital (see p. 29) The recording procedure is the
same as described above.
1
MONITOR
VSX-D710S
1 Turn the MULTI JOG dial to select a source to
record (you can also use the MULTI
CONTROL buttons if the DIRECT FUNCTION
is on).
Refer to the table below for the type of digital connec-
tions available in each receiver model.
MODEL
COAX IN OPT IN OPT OUT
All functions except MONITOR are accessible from
the remote control.
VSX-D710S
VSX-D810S
VSX-D850S
1
1
1
2
3
4
1
1
1
2 Prepare the program source.
Tune to the radio station, load the CD, etc. For a
video recording load the video, DVD etc.
3 Insert a blank tape, MD, video etc. into the
recording device connected to either CD-R/
MD/TAPE or VCR/DVR and set the recording
levels.
Refer to the instructions that came with the recorder
if you are unsure how to do this. Most video record-
ers set the audio recording level automatically—
check your video's instruction manual if you are
unsure whether yours has manual controls.
34
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Rest of Your System
09
3 Use the number buttons to enter the 4 digit
Recalling Preset Codes
The following steps show you how to recall preset codes
for each MULTI CONTROL button. Once the preset
code is assigned, pressing the button will automatically
set the remote to operate the respective component.
setup code. (see pages 43-49 for Preset Code
List)
The LED will blink for half a second after each digit
is input and will show a long, two second blink to
confirm a valid code has been input. (VSX-D850S
only: The code appears in the LCD display as you
input it. The display shows OK if it’s a valid code.)
If the LED blinks three times it means an invalid code
has been input or an error has occurred. Check the
preset code list and try again. If you are not able to
input a preset code you can refer to page 38 to teach
the remote control individual commands.
MEMO:
• Refer to “Preset Code List” on pages 43 to 49 for the
components and manufacturers available.
• Refer to “Controlling the Rest of Your System” on
pages 35 to 49 for detailed explanations on how to
operate your other components.
The remote control returns to the previous operation
mode. It will also return to the previous mode after
thirty seconds of inactivity.
SOURCE
RECEIVER
LED
2
3
DVD
RCV
TV
VCR
CD-R
TVC
MULTI CONTROL
TUN
4 Repeat steps 1 through 3 to assign preset
codes for as many components as necessary.
CD
2
3
ATT
6
1
MIDNIGHT
5.1 / 7.1
5
4
EFFECT
8
0
9
DISC
7
10
MEMO:
ENTER
DTV INFO MPX/RETURN D.ACCESS
GUIDE
8
7
CLASS
3
¶
• You can only input a code for the component type
written on each MULTI CONTROL button.
• If you recall a preset code for the tuner (TUN MULTI
CONTROL), you will not be able to control the built-
in tuner of this receiver using the remote. To reset the
remote to the built-in tuner, input the preset code
7008.
BAND
DTV ON/OFF DTV MENU
1
¡
4
¢
2
/DTS
DSP
TEST TONE SIGNAL SELECT
CH SELECT
LOUDNESS
CH LEVEL
FUNCTION
MUTING
FL DIMMER
TUNE
SETUP
1
ST
ST
ENTER
TUNE
• To erase the preset code for the current MULTI
CONTROL button, enter 0000 as the code in step 3.
CHANNEL
VOLUME
MASTER VOLUME
MENU
TVFUNC
TV
TV CONTROL
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
1 Press SETUP and hold for three seconds to
select the Preset mode.
The LED lights steadily for two seconds. (VSX-
D850S only: The LCD display shows SETUP.)
To cancel the preset mode at any time
Press SETUP.
The remote control will also return to the previous
mode after thirty seconds of inactivity.
2 Press the MULTI CONTROL button for the
component you want to control.
Each button can be set to control one of the
following components
DVD
TV
DVD/LD player or DVD Recorder
TV, Satellite tuner or Cable TV tuner
VCR or Digital Video Recorder
CD player
VCR
CD
CD-R
CD Recorder, Tape deck
or MD player
TVC
TUN
TV or Cable TV tuner
FM/ AM tuner
35
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Rest of Your System
5 Switch the component back on or restart
playback.
Setting Up Using Preset Code
Search (VSX-D710S/D810S)
6 Use the % fi buttons to scan through the last 10
An alternative method of setting up the remote with
preset codes is to use the search feature. The remote
transmits batches of 10 codes; when you see the
component responding you just scan through those last
10 codes until you find the correct one.
codes transmitted to identify the correct code.
The LED will blink during transmission of the code.
Stop when you see the component stop or switch off.
You can also verify you have the correct code by
pressing PLAY, STOP., VOL +/–, etc.
7 Press and hold ENTER for three seconds to
save the preset code.
SOURCE
RECEIVER
LED
DVD
RCV
TV
VCR
CD-R
TVC
MULTI CONTROL
TUN
The remote control automatically returns to normal
usuage.
CD
3
2
3
ATT
6
1
MIDNIGHT
5.1 / 7.1
5
4
EFFECT
8
0
9
7
10
DISC
ENTER
DTV INFO MPX/RETURN D.ACCESS
GUIDE
8
7
CLASS
3
¶
BAND
DTV ON/OFF DTV MENU
Setting Up Using Full Library
Search (VSX-D850S)
An alternative method of setting up the remote with
preset codes is to use the Library Search feature. The
remote transmits batches of 10 codes; when you see the
component responding you just scan through those last
10 codes until you find the correct one.
1
¡
4
¢
2
/DTS
DSP
TEST TONE SIGNAL SELECT
CH SELECT
LOUDNESS
CH LEVEL
FUNCTION
MUTING
FL DIMMER
TUNE
SETUP
2,4
4
6,7
ST
ST
ENTER
TUNE
CHANNEL
VOLUME
MASTER VOLUME
MENU
TVFUNC
TV
TV CONTROL
SOURCE
RECEIVER
LED
SETUP
SEARCH
SEARCH
LEARN
ERASE
BY BRAND
LCD display
1 Switch on the component you want to
control.
DVD
RCV
TV
VCR
CD-R
TVC
MULTI CONTROL
TUN
CD
4
2
3
ATT
6
1
MIDNIGHT
If the component is some kind of player (CD player,
VCR, etc.), then start it playing.
5.1 / 7.1
5
4
EFFECT
8
0
9
DISC
7
10
ENTER
2 Press and hold SETUP for three seconds.
DTV INFO MPX/RETURN D.ACCESS
GUIDE
8
7
CLASS
3
¶
BAND
DTV ON/OFF DTV MENU
The LED lights steadily for two seconds.
The remote control will also return to the previous
mode after thirty seconds of inactivity.
1
¡
4
¢
2
/DTS
DSP
TEST TONE SIGNAL SELECT
CH SELECT
LOUDNESS
CH LEVEL
FUNCTION
MUTING
FL DIMMER
TUNE
SETUP
2,5
5
3,7,8
3 Press the MULTI CONTROL button for the
component you want to control.
ST
ST
ENTER
TUNE
Each button can be set to control one of the following
components
CHANNEL
VOLUME
MASTER VOLUME
MENU
TVFUNC
TV
DVD
TV
DVD/LD player or DVD Recorder
TV, Satellite tuner or Cable TV tuner
VCR or Digital Video Recorder
CD player
TV CONTROL
VCR
CD
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
CD-R
CD Recorder, Tape deck
or MD player
TVC
TUN
TV or Cable TV tuner
FM/ AM tuner
1 Switch on the component you want to
control.
4 Press and hold SETUP for two seconds.
A batch of 10 codes is transmitted and the LED
blinks during transmission. If you see the component
respond, by stopping (for playback components
only) or switching off, go on to the step 5, otherwise
repeat this step.
If the component is some kind of player (CD player,
VCR, etc.), then start it playing.
2 Press and hold SETUP for three seconds.
The remote’s LCD display shows SETUP.
The remote control will also return to the previous
mode after thirty seconds of inactivity.
If you want to cancel the search mode, press and
hold MUTING for two seconds.
36
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Rest of Your System
3 Use the @ # buttons to select the Full
2 Press and hold SETUP for three seconds.
Library Search mode.
The remote’s LCD display shows SETUP.
The remote control will also return to the previous
mode after thirty seconds of inactivity.
The remote’s LCD display shows SEARCH.
4 Press the MULTI CONTROL button for the
component you want to control.
3 Use the @ # buttons to select the Brand
Search mode, then press ENTER.
Each button can be set to control one of the following
components
The remote’s LCD display shows BRAND SEARCH.
DVD
TV
DVD/LD player or DVD Recorder
TV, Satellite tuner or Cable TV tuner
VCR or Digital Video Recorder
CD player
CD Recorder, Tape deck
or MD player
4 Press the MULTI CONTROL button for the
component you want to control.
VCR
CD
Each button can be set to control one of the following
components
CD-R
DVD
TV
DVD/LD player or DVD Recorder
TV, Satellite tuner or Cable TV tuner
VCR or Digital Video Recorder
CD player
TVC
TUN
TV or Cable TV tuner
FM/ AM tuner
VCR
CD
5 Press and hold SETUP for two seconds.
CD-R
CD Recorder, Tape deck
or MD player
A batch of 10 codes is transmitted and the LED
blinks during transmission.
TVC
TUN
TV or Cable TV tuner
FM/ AM tuner
If you see the component respond, by stopping (for
playback components only) or switching off, go on to
the step 6, otherwise repeat this step. After the ten
codes have been sent the search icon blinks.
If you want to cancel the search mode, press and
hold MUTING for two seconds.
5 Use the % fi buttons to select the brand of
the component.
The brand names appear in the remote’s LCD display.
If the brand of your component doesn’t appear then
you can’t use this feature.
6 Switch the component back on or restart
playback.
6 Press and hold SETUP for two seconds.
A batch of 10 codes is transmitted and the transmission
icon is on while the codes are sent out. After all ten
codes have been sent the search icon blinks.
If you see the component respond, by stopping (for
playback components only) or switching off, go on to
the step 6, otherwise repeat this step.
7 Use the % fi buttons to scan through the last
10 codes transmitted to identify the correct
code.
The transmission icon is on while the codes are sent
out. Stop when you see the component stop or
switch off. The LCD display shows the I.D.
You can also verify you have the correct code by
pressing PLAY, STOP., VOL +/–, etc.
If you want to cancel the search mode, press and hold
MUTING for two seconds.
7 Switch the component back on or restart
playback.
8 Press and hold ENTER for three seconds to
save the preset code.
8 Use the % fi buttons to scan through the last 10
codes transmitted to identify the correct code.
The transmission icon is on while the codes are sent
out. Stop when you see the component stop or
switch off. The display shows the I.D.
You can also verify you have the correct code by
pressing PLAY, STOP., VOL +/–, etc.
Setting Up Using Brand Name
Search (VSX-D850S only)
An alternative method of setting up the remote with
preset codes is to use the Brand Search feature. The
remote transmits batches of 10 codes; when you see the
component responding you just scan through those last
10 codes until you find the correct one.
9 Press and hold ENTER for three seconds to
save the preset code.
1 Switch on the component you want to control.
If the component is some kind of player (CD player,
VCR, etc.), then start it playing.
37
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Rest of Your System
5 Point the two remote controls towards each
other. Press the button to be learned on this
receiver’s remote control (for example the 3
[play] button).
Learning Mode: Programming
Signals from other Remote
Controls
If preset codes are not available for your component(s),
or the available preset codes do not operate correctly,
you can use this function to program in signals from the
remote control(s) of your other component(s). This
operation can also be used after recalling a preset code
to program additional operations not covered in the
preset codes.
1 - 2 inches
Point the remote controls directly at each other, about
1-2 inches apart, and press the button on the remote
control for the operation you want to program. The
LED flashes rapidly. For VSX-D850S, the LEARN icon
blinking.
6 Press the corresponding button on the other
remote control to be taught to this receiver’s
remote control (in the above example the 3
[play] button).
SOURCE
RECEIVER
VSX-D710S/
D810S only
LED
4
3
DVD
RCV
TV
VCR
CD-R
TVC
MULTI CONTROL
TUN
CD
2
3
ATT
6
1
MIDNIGHT
5.1 / 7.1
5
4
Point the remote controls toward each other.
Press the button on the other remote control
corresponding to the operation you wish to program.
The LED on this receiver’s remote will go out and
then resume a steady light if the operation is learned.
(For VSX-D850S model the LEARN icon will light
steadily and the LCD display will show “OK” if the
operation has been learned.) If the operation hasn’t
been learned for some reason the LED will blink for
three seconds and then light steadily. (For VSX-
D850S model the LCD will display “error” if the
operation hasn’t been learned.)
EFFECT
8
0
9
7
10
DISC
ENTER
DTV INFO MPX/RETURN D.ACCESS
GUIDE
8
7
CLASS
3
¶
BAND
DTV ON/OFF DTV MENU
1
¡
4
¢
2
/DTS
DSP
TEST TONE SIGNAL SELECT
CH SELECT
LOUDNESS
CH LEVEL
FUNCTION
MUTING
FL DIMMER
TUNE
SETUP
1,7
ST
ST
ENTER
2
TUNE
VSX-D850S only
CHANNEL
VOLUME
MASTER VOLUME
MENU
TVFUNC
TV
If this happens press the teaching key repeatedly,
varying the distances between the remotes, until you
see the LED on this unit’s remote light steadily,
without blinking first.
TV CONTROL
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
To program additional operations for the current
component
1 Press SETUP and hold for three seconds.
The LED on the remote control will light for two
seconds.
To cancel the Learning mode at any time
Press SETUP.
Repeat steps 5 and 6.
To program operations for another component
Repeat steps 2 through 6 (VSX-D850S).
Repeat steps 3 through 6 (VSX-D710S/D810S).
The remote control will also return to the previous
mode after thirty seconds of inactivity.
7 Press and hold SETUP for one second to exit
the LEARNING setup mode.
2 VSX-D850S only: Use the @ # buttons to
select the Learning mode.
After thirty seconds of inactivity the remote control
will automatically leave the LEARNING mode and
revert to its previous mode.
The Learning mode is indicated by the Learning icon
(LEARN) in the remote’s LCD display.
3 Press the MULTI CONTROL button for the
component you want to control
MEMO:
• Some commands from other remote controls cannot
be learned, but in most cases the remotes just need to
be moved closer together or farther apart.
• Certain buttons represent modes that cannot be
learned from other remote controls. These include:
RCV, CH SELECT, CH LEVEL, FUNCTION
LOUDNESS, FL DIMMER, and MUTING.
4 VSX-D710S/D810S: Press and hold the
RECEIVER button for two seconds to start
the Learning mode.
The LED lights steadily.
To cancel LEARNING setup mode
Press SETUP for one second.
If no commands are entered within thirty seconds the
remote will revert to its previous mode.
• TV CONTROL buttons ( TV , VOL +/-, and TV
FUNC ) can only be learned in TV & TVC mode.
38
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Rest of Your System
2 Use the number buttons to enter 0123.
Erasing One of the Remote
Control Button Settings
This erases one of the buttons you have programmed
and restores the factory installed preset to that button.
The LED light for half a second for each digit input.
On the VSX-D710S and VSX-D810S the LED lights
for two seconds to indicate that the setings have been
restored to the factory presets. (If the LED blinks
three times, then you made a mistake with the
code—try re-entering it.) On the VSX-D850S the
LCD displays 0123 and then “OK” for two seconds if
the four digit code has been accepted. If any error has
occurred display will blink three times.
VSX-D710S/D810S:
1 Press SETUP and hold for three seconds.
The LED on the remote control will light for two
seconds.
2 Press the MULTI CONTROL button relating
to the function of the button to be cleared.
Direct Function
The remote control will return to the previous mode
after thirty seconds of inactivity.
The direct function is a useful feature which allows you
keep the receiver in one function (for example, CD)
while putting the remote control in a different function.
This could let you, for example, use the remote control
to set up and listen to a CD on the receiver and then use
the remote control to rewind a tape in your VCR while
you continue to listen to your CD player.
3 Press the RECEIVER button twice within
three seconds to start erase mode.
The LED blinks.
4 Press the button to be cleared for three
seconds.
The LED lights steadily for three seconds and then
goes off.
When the DIRECT function is ON any MULTI
CONTROL button you press will change the function of
both the receiver and the remote control. When you
turn the DIRECT function OFF, you can operate the
remote control without affecting the receiver. Thus you
could switch the remote control the VCR and operate
that component while the receiver plays a different
component.
5 Repeat steps 4 to erase other codes.
6 Press and hold the SETUP button for one
second to exit the erase mode.
VSX-D850S:
1 Press SETUP and hold for three seconds.
To set a MULTI CONTROL button to DIRECT ON or
DIRECT OFF:
The LED on the remote control will light for two
seconds and the display shows SETUP.
1 Press SETUP and hold for three seconds.
2 Use the @ # buttons to select the Erase mode.
On the VSX-D710S and VSX-D810S the LED on the
remote control will light for two seconds. On the
VSX-D850S the LCD display SETUP icon will light.
If you want to cancel the Direct Function mode, press
SETUP.
The LCD display shows ERASE.
3 Press the MULTI CONTROL button relating
to the function of the button to be cleared.
4 Press the button you want to clear.
5 Repeat steps 3-4 to erase other codes.
The remote control will also return to the previous
mode after thirty seconds of inactivity.
2 Press the MULTI CONTROL button that you
want to set up.
3 Use the number buttons to enter 9990
(DIRECT ON) or 9995 (DIRECT OFF).
Clearing All the Remote
Control Settings
Clears all presets, all learned functions and restores the
factory presets.
The LED will light for half a second on each digit
input. Then, on the VSX-D710S and VSX-D810S the
LED will light for two seconds to indicate that it’s
been correctly set. (If the LED blinks three times,
then you made a mistake with the code—try re-
entering it.) On the VSX-D850S, the LCD will display
“OK” to show the four digit code has been accepted.
If it hasn’t been accepted the display will blink three
times.
1 Press SETUP and hold for three seconds.
For the VSX-D710S and VSX-D810S the LED on the
remote control lights for two seconds. For the VSX-
D850S the SETUP icon lights.
If you want to cancel the Clearing mode, press
SETUP.
MEMO:
The remote control will also return to the previous
mode after thirty seconds of inactivity.
39
• TV CONT doesn’t have this feature and thus can’t use
the DIRECT FUNCTION.
Download from Www.Somanuals.com. All Manuals Search And Download.
En
Controlling the Rest of Your System
Checking Preset Codes
To check which preset code is associated with a MULTI
CONTROL button:
Operating other Pioneer
Components
By connecting a control cord (optional), you can control
other Pioneer equipment using this remote control unit.
Point the remote control unit towards the remote sensor
of this unit, even when operating other equipment.
VSX-D710S/D810S:
1 Press SETUP and hold for three seconds.
The LED on the remote control lights for two
seconds.
2 Press the MULTI CONTROL button you
want to check the preset code for.
CONTROL
OUT
IN
CONTROL
OUT
3 Press and hold ENTER for two seconds.
Each preset code consists of four digits, for example
1329. Each digit will be represented by a series of
blinks on the remote’s LED—3 blinks to represent
the digit “3”, etc. (“0” is represented by 10 blinks.)
VSX-D850S
Other Pioneer products
with Î mark
VSX-D850S:
1 Press and hold for three seconds the MULTI
CONTROL button you want to check the
preset code for.
Connect to CONTROL IN
terminal of other Pioneer
The preset code appears in the remote’s LCD display.
products with Î mark.
Remote control unit
The remote control signals are received by the remote
sensor of this unit, and sent to the other devices via the
CONTROL OUT terminal.
MEMO:
• You can also control Pioneer components by pointing
the receiver's remote control directly at the
component. This type of operation does not require
control cords.
40
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Rest of Your System
CD/MD/CD-R/VCR/DVD/LD/DVR Player/Cassette Deck Controls
This remote control can control these components after entering the proper codes or teaching the receiver the
commands (see p.35-37).
Use MULTI CONTROL buttons to put the remote control in the stated mode.
Button(s)
Function
Components
CD/MD/CD-R/VCR/DVD/LD/
DVR Player/Cassette deck
SOURCE
Press to switch the components between STANDBY and ON.
Press to return to the start of the current track. Repeated presses skips to the
start of previous tracks.
CD/MD/CD-R/DVD/LD Player
4
¢
Go back channels (channel −).
VCR/DVR
Play the reverse side of the tape on a reversible deck.
Cassette deck
Press to advance to the start of the next track. Repeated presses skips to the
start of following tracks.
CD/MD/CD-R/LD Player
Go forward channels (channel +).
VCR
Play the forward side of the tape on a reversible deck.
Cassette deck
CD/MD/CD-R/VCR/DVD/LD/
DVR Player/Cassette deck
8
Pause playback or recording.
Hold down for fast forward playback.
Hold down for fast reverse playback.
Start playback.
CD/MD/CD-R/VCR/DVD/LD/
DVR Player/Cassette deck
¡
1
3
CD/MD/CD-R/VCR/DVD/LD/
DVR Player/Cassette deck
CD/MD/CD-R/VCR/DVD/LD/
DVR Player/Cassette deck
Stop playback (on some models, pressing this when the disc is already
stopped will cause the disc tray to open).
CD/MD/CD-R/VCR/DVD/LD/
DVR Player/Cassette deck
7
Directly access tracks on a program source.
CD/MD/CD-R/VCR/LD Player
DVD/DVR Player
Number
Buttons
Use the number buttons to navigate the on-screen display.
Select tracks higher than 10. Press this button and the remaining number to
get the track (+10 Button + 3= track 13).
+10 Button
CD/MD/CD-R/VCR/LD Player
Choose the disc.
Multiple CD player
MD Player
DISC Button
Ejects thte disc
Press to switches between the VCR tuner and the TV tuner.
Changes sides of the LD.
VCR/Cassette deck
LD Player
¶RECORD
Button
Start recording. To prevent accidental recording, this button must be pressed
twice to take effect (the second press must be within 10 seconds of the first).
VCR/DVR Player
MENU
%
Displays menus concerning the current DVD or DVR you are using.
DVD/DVR Player
Cassette deck
Cassette deck
Cassette deck
Cassette deck
Cassette deck
Pause the tape.
fi
Stop the tape.
ENTER
@
Start playback.
Fast rewind the tape.
Fast forward the tape
#
@ # %fi &
ENTER
Navigate DVD menus/options.
DVD/DVR Player
41
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Rest of Your System
Cable TV/Satellite TV/TV/DTV Controls
This remote control can control these components after entering the proper codes or teaching the receiver the
commands (see p.35-37).
Use MULTI CONTROL buttons to put the remote control in the stated mode.
Button(s)
Function
Components
Press to switch the DTV on or off.
DTV
TV
Press to switch the TV or CATV between STANDBY and ON.
Cable TV/Satellite TV/TV
Press to switch the TV input. (Not possible with all models. If it doesn't work
with the preset code, use the learning feature.)
TV FUNC.
TV
CHANNEL
+/−
Select channels.
Cable TV/Satellite TV/TV/DTV
TV VOL +/−
SOURCE
4
Adjust the TV volume.
Cable TV/Satellite TV/TV/DTV
Press to switch the DTV on or off.
DTV
Move to lower numbered channels
Cable TV/Satellite TV/TV
Choose the RED commands on a DTV menu.
Use to move to higher numbered channels
Use to choose the YELLOW commands on a DTV menu.
Use as the GUIDE button for navigating
Use to choose the GREEN commands on a DTV menu.
Use to choose the BLUE commands on a DTV menu.
Use to get INFO on the DTV program.
Use to switch DTV audio tracks
DTV
Cable TV/Satellite TV/TV
¢
DTV
DTV
DTV
DTV
DTV
DTV
8
¡
1
3
7
Number
Buttons
Use to select a specific TV channel.
Cable TV/Satellite TV/TV/DTV
DTV
+10 Button
Use to add a decimal point when selecting a specific TV channel.
Use to enter a channel.
DTV
DISC Button
MENU
Select different menus from the DTV functions.
Select the menu screen.
DTV
Cable TV/Satellite TV/TV
Select or adjust and navigate items on the menu screen.
ENTER : Use to bring up the DTV menus.
DTV
@ # %fi &
ENTER
Press to select or adjust and navigate items on the menu screen.
Cable TV/Satellite TV/TV/DTV
For TV and cable TV use this button to immediately enter a new channel
(CHANNEL ENTER function). For satellite TV use this button to exit the
menu screen.
EFFECT +/−
Cable TV/Satellite TV/TV/DTV
MEMO:
• The first four buttons for the VSX-D710S/D810S/D850S are dedicated to control the TV assigned to the TVC
button. Thus if you only have one TV to hook up to this system assign it to the TVC MULTI CONTROL button. If
you have two TVs, assign the main TV to the TVC button. If you hook up your system this way, the first four TV
controls will always be accessible.
42
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Rest of Your System
Preset Code List
You can only set these codes for the buttons that assigned to the respective components. So, for example, the
TV codes can only be set to the TV or TVC button.
ANITECH
AOC
1006, 1029, 1036
1011, 1013
1078, 1079
1036
CS ELECTRONICS 1078
TV
TVC
TV
CTC
1086
ARCAM
CURTIS MATHES
1009, 1013, 1019
1022, 1023, 1025
1026, 1027, 1041
1047, 1050, 1057
1110, 1113, 1129
1131
Manufacturer
PHILIPS
Code
ASBERG
ASUKA
ATLANTIC
AUDIOSONIC
AUDIOVOX
1008, 1017, 1020
1025, 1104, 1115
1001, 1007, 1016
1023, 1054, 1055
1075, 1076, 1082
1087, 1121, 1124
1015, 1016, 1027
1031, 1050, 1051
1085
1005, 1026, 1034
1038, 1042, 1046
1075, 1097
1016, 1019, 1041
1056, 1124
1006, 1011, 1013
1017, 1026, 1027
1039, 1062, 1079
1089, 1092, 1102
1005, 1017, 1033
1046, 1065, 1084
1091
1011, 1016, 1041
1045, 1049, 1062
1114
1002, 1011, 1013
1017, 1019, 1026
1046, 1062, 1079
1092
1066, 1068, 1071
1075, 1115
1080
1073
SONY
PANASONIC
1017, 1046
1040, 1064, 1110
1118
CYBERTRON
CXC
1080
AUTOVOX
BANG & OLUFSEN 1116
BASIC LINE
BAYSONIC
BAUR
1036, 1073
1064
TOSHIBA
DAINICHI
DANSAI
DAYTRON
DECCA
DE GRAAF
DENON
DIXI
DUAL TEC
DUMONT
DWIN
ECE
ELBE
ELECTROBAND
ELIN
1077, 1080
1017
1006, 1011
1017, 1032
1074
1047
1006, 1017
1079
1006, 1080
1064
1007, 1017, 1114
1115
1102
1011
TELEFUNKEN
BEKO
SHARP
BELCOR
BELL & HOWELL
BEON
1009, 1050
1017
SAMSUNG
1010, 1011, 1031
1125, 1127
1017
BINATONE
BLUE SKY
BLUE STAR
BONDSTEC
BOOTS
BPL
BSR
1079
1080
1090
1088
FERGUSON
MITSUBISHI
GOLDSTAR
1086
1001
1079
1017
1090
ELITE
ELTA
EMERSON
1080, 1098
1006
1095
BRADFORD
BRANDT
1064
1011, 1018, 1019
1050, 1061, 1062
1063, 1064, 1075
1083, 1090, 1112
1118, 1119
1013
1008, 1017
1006, 1120
1073
1078
1074
1017, 1031, 1032
1044
1050, 1074, 1079
1096, 1102
1111
1046, 1069, 1070
1072
BRITANNIA
BROCKWOOD
BROKSONIC
BTC
1078
1011
1083, 1112
1080
ENVISION
ERRES
ETRON
EXPERT
FIDELITY
FINLANDIA
FINLUX
BLAUPUNKT
BUSH
1006, 1016, 1017
1080, 1090, 1095
1103, 1104
1013, 1026
1013
RADIOLA
JVC
1008, 1017
1016, 1024, 1030
1053, 1065, 1067
1103, 1122
1006, 1011, 1017
1019, 1028, 1040
1050, 1104, 1110
1118, 1119
1017, 1063, 1083
1095, 1098, 1099
1112
1017, 1052, 1066
1068, 1071, 1075
1115
CANDLE
CARNIVALE
CARREFOUR
CARVER
CASCADE
CATHAY
DAEWOO
1016
1025, 1058
1006
FISHER
1017
FLINT
ORION
CENTURY
CENTURION
CELEBRITY
CCE
1075
FORMENTI
FORTRESS
FRONTECH
1017, 1075, 1098
1041
1055, 1086, 1089
1109
1017
1001
SIEMENS
ADMIRAL
1017
CGE
1034, 1036, 1038
1086, 1097
1006
FUJITSU
FUNAI
1032, 1063, 1073
1059, 1063, 1064
1089, 1095, 1096
1064
1041, 1055, 1075
1112
CIMLINE
CINERAL
CITIZEN
1040, 1110
1013, 1019, 1026
1027, 1040
1017
1036, 1086, 1102
1007, 1015, 1114
1026
1098, 1102
1006, 1016, 1064
1078
FUTURETECH
GE
ADYSON
AIKO
AKAI
AKURA
ACURA
ALARON
ALBA
1014, 1079
1012, 1022, 1023
1041, 1062, 1090
1110, 1129, 1131
1017, 1020, 1032
1072, 1079
1006, 1075
1055, 1080
1010, 1011, 1013
1016, 1017, 1032
1079, 1103, 1104
1102
1080
1055
1017, 1032, 1048
1074, 1079, 1100
1024, 1026, 1058
1090
1040
1013, 1074
1080, 1089
CLARIVOX
CLATRONIC
CME
CONCERTO
CONDOR
CONTEC
GEC
1006
1063, 1078
GELOSO
1006, 1016, 1017
1080, 1103
GENEXXA
GIBRALTER
GOODMANS
ALLORGAN
ANAM
1095
1004, 1006, 1029
1054, 1064, 1087
1108
CONTINENTAL EDISON 1069, 1070
1072
CRAIG
CROSLEY
GORENJE
GPM
GRAETZ
GRANADA
1054
ANAM NATIONAL 1054, 1087, 1108
AMBASSADOR 1061
AMERICA ACTION 1064
AMPLIVISION
AMPRO
AMSTRAD
1025, 1034, 1036
1038, 1075
1006, 1017, 1019
1036, 1064, 1102
1106
CROWN
1079
1126
GRADIENTE
GRANDIN
43
1006, 1017, 1103
1105
CRYSTAL
1109
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Rest of Your System
PHONOLA
PILOT
PORTLAND
PRISM
PROFEX
PROLINE
PROSOCAN
PROTECH
1008, 1017
1011, 1013, 1019
1011, 1019, 1040
1023
1006, 1037
1099
1022
1006, 1017, 1043
1079, 1086, 1089
1106, 1109
1062, 1113
1010, 1011
1008
GRUNDIG
1031, 1066, 1068
1072, 1115
1063, 1064
1062
MANESTH
MARANTZ
MARK
1079, 1089, 1098
1013, 1017, 1025
1017
GRUNPY
HALLMARK
HANSEATIC
MATSUI
1006, 1015, 1016
1017, 1032, 1074,
1079, 1095, 1103
1087
1017, 1098
HARLEY DAVIDSON 1063
HARVARD
1029, 1064
MATSUSHITA
MCMICHAEL
MEDIATOR
MEGATRON
MEMOREX
HARMAN/KARDON 1025
1020
HCM
HINARI
1006, 1090, 1105
1006, 1016, 1017
1080
1008, 1017
1047, 1062
1006, 1009, 1026
1049, 1050, 1062
1087, 1112
1075
PROTON
PULSAR
PYE
QUASAR
QUELLE
HISAWA
HITACHI
1090, 1111
1014, 1016, 1018
1020, 1021, 1026
1044, 1046, 1047
1055, 1069, 1070
1079, 1081, 1097
1078, 1104
1017, 1089, 1090
1079, 1089, 1103
1080
1023, 1056, 1087
1007, 1017, 1031
1034, 1038, 1071
1075, 1097, 1114
1115
METZ
MGA
1011, 1013, 1049
1062
1010, 1019, 1022
1023
1031, 1115
1105
1012
1078, 1092, 1093
1094
1036
1041
1011, 1013, 1026
1027, 1078, 1114
1006, 1036, 1043
1064, 1078
1051, 1057, 1062
1011, 1013, 1016
1026, 1058
1017, 1066, 1075
1115
MIDLAND
HUANYU
HYPSON
ICE
ICES
IMPERIAL
QUESTA
R-LINE
RANK ARENA
RBM
RCA
1016
MINERVA
MINOKA
MINUTZ
MIVAR
1017
1016
1031
1034, 1036, 1038
1086, 1102, 1106
1017
1011, 1018, 1022
1023, 1039, 1041
1128, 1129, 1130
1131, 1132
1011, 1013, 1019
1026, 1050, 1056
1062, 1064
1055, 1073, 1088
1089
MOTION
MOTOROLA
MTC
INDIANA
INFINITY
INGELEN
INNO HIT
INNOVA
INTEQ
INTERBUY
INTERFUNK
1025
1055
REALISTIC
REX
1032
MULTITECH
1017
1010
NAD
NEC
1029
1017, 1055, 1086
1114
REVOX
ROADSTAR
1017
1006, 1080, 1089
1106
1010, 1013, 1117
1035, 1046, 1055
1069, 1070, 1072
1075, 1091
1084
1006, 1089, 1109
1055
NECKERMANN
INTERVISION
1017, 1029, 1043
1079, 1089
1080
NEI
1017, 1109
1017
1078
1014, 1015, 1017
1032, 1078, 1080
1089
RUNCO
SABA
ISUKAI
ITS
NETSAT
NICAMAGIC
NIKKAI
1103
ITT
1055
JBL
1025
SACCS
JCB
1001
SAISHO
SALORA
SAMBERS
SAMPO
SAMSUX
SANDRA
SANSEI
SANSUI
SANYO
KAISUI
1006, 1078, 1079
1080, 1090,
1078
NIKKO
NOBLIKO
NORDMENDE
1013, 1040, 1062
1036, 1043
1046, 1069, 1070
1075, 1091
1040
1055, 1077
1064
1050, 1057, 1087
1041, 1056
1014, 1032, 1079
1080, 1089, 1105
1080
1014, 1032, 1052
1007, 1114
1007, 1016, 1017
1066, 1075, 1079
1098, 1115
1102, 1106
1079, 1089
1036, 1043, 1075
1013, 1019
1019
KAMP
KAPSCH
KAWASHO
KEC
1055, 1073
1078
NTC
OCEANIC
ONWA
OPTIMUS
OPTONICA
OSAKI
1078
1064
1110
KENDO
KNEISSEL
KENWOOD
KINGSLEY
KONIG
1017
1112
1088
1016, 1032, 1048
1050, 1052, 1074
1075, 1100
1008, 1017, 1020
1017, 1080, 1086
1096, 1103
1011
1011, 1013
1078
1114
SBR
SCHNEIDER
KORPEL
KOYODA
KTV
1017
OSO
1006
OSUME
OTTO
1013, 1019, 1064
1017, 1032, 1089
1095
SCIMITSU
SCOTCH
SCOTT
LEYCO
OTTO VERSAND
1062
1011, 1062, 1063
1064, 1083
1022, 1025, 1026
1050, 1051, 1059
1062, 1063
1016, 1036, 1079
1089
LG
1026
LIESENK&TTER
LLOYTRON
LOEWE
LOGIK
1017
PALLADIUM
PANAMA
SEARS
1014
1035, 1114
1009
PATHE MARCONI 1069, 1070, 1072
PATHE CINEMA
1075, 1078, 1084
1098
1006
1003, 1011, 1012
1013, 1019, 1022
1023, 1026, 1027
1051, 1062, 1131
1098
1078
1014
1011, 1013, 1025
1034, 1036, 1038
1047, 1075, 1086
1112
SEG
LUMA
LUXMAN
LXI
1073
1026
PAUSA
PENNEY
SEI
1043, 1075, 1095
1007
1022, 1025, 1050
1051, 1062
1006, 1017, 1029
1044, 1046, 1055
1079, 1091, 1104
1013, 1016, 1025
1063
1043, 1086
1036, 1043, 1075
1009
SEI-SINUDYNE
SELECO
SEMIVOX
SEMP
1055, 1073, 1088
1064
M ELECTRONIC
1051
PERDIO
PHAPSODY
PHASE
SENTRA
SHOGUN
SHORAI
SSS
1015
MAGNAVOX
1011
1095
MAGNADYNE
MAGNAFON
MAJESTIC
PHILCO
1011, 1064
1043, 1075
44
SIAREM
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Rest of Your System
SINDYNE
SIGNATURE
SILVER
1043, 1075, 1095
1009
WARDS
WEGA
1009, 1011, 1012
CD PLAYER
CD
CD-R
1013, 1025, 1026
1056, 1062, 1063
1016
1016
Manufacturer
AIWA
Code
5016, 5021
SKY
1017
1017
1014, 1055
1074
1006, 1017
1055, 1074, 1077
1017
1062, 1063, 1064
1017, 1106
1059
1006, 1079, 1080
1064
1055, 1073, 1088
1095, 1099
1078
1001
1080
1013, 1025
1059
1017
1032, 1041, 1055
1079, 1080
1016, 1020, 1079
1079, 1086
1098
1023, 1087, 1121
1063
SKY-WORTH
SOLAVOX
SONITRON
SONOKO
SONOLOR
SONTEC
WHITE WESTINGHOUSE 1017, 1078
AKAI
5014, 5020, 5032
5041
1098, 1112, 1118
1119
1011, 1013
1017, 1079, 1101
1109
1073
1009, 1010, 1040
1112
1018, 1046, 1055
1057, 1060, 1091
1107, 1123, 1124
ANAM
ARCAM
5021
YAMAHA
YOKO
AUDIOLAB
AUDIOMECA
AUDIO TON
BESTAR
5021
5021
5021
SOUNDESIGN
SOUNDWAVE
SQUAREVIEW
STANDARD
STARLITE
STERN
ZANUSSI
ZENITH
5022
BURMESTER
5045
CALIFORNIA AUDIO LABS 5004
PIONEER
CARVER
5021, 5025, 5046
5018, 5022
5004
CONDOR
CURTIS MATHES
CYRUS
SUNKAI
5021
CD-R
CD
SUPERTECH
SUPREME
SUSUMU
SYLVANIA
SYMPHONIC
SYSLINE
MD PLAYER
DENON
5002, 5006, 5040
5060
Manufacturer
SONY
Code
5401
DKK
DUAL
DYNAMIC BASS
EMERSON
EROICA
FANTASIA
FISHER
GARRARD
GENEXXA
GOLDSTAR
GRUNDIG
HARMAN/KARDON 5021, 5023
HITACHI
INKEL
JVC
KENWOOD
5001
5031
KENWOOD
SHARP
5402,5407
5403
5025
5038
TANDY
ONKYO
5404
5053, 5054
5051
5024, 5025
5044, 5045
5005, 5038
5043, 5051
5021
ORION
5406
TASHIKO
TEC
TECHNEMA
TECHNICS
TECHNOL ACE
TECHWOOD
TEKNIKA
DENON
5405
PIONEER
5408
DVD
LD PLAYER
1023, 1026
1009, 1011, 1019
1025, 1026, 1027
1040, 1049, 1063
1064
Manufacturer
AKAI
BBK
CYRUS
DENON
DISCO VISION
FUNAI
Code
5222
5224
5207
5202
5201
5217
5201
5213
5219
5215
5203, 5205
5202
5202
5210
5005
5015, 5026, 5046
5011
5003, 5008, 5029
5056, 5057, 5062
5021
TELEAVIA
TELEMEISTER
TELETECH
TELETON
TENSAI
TEXET
THOMSON
1072
1098
KRELL
LINN
LUXMAN
LXI
MAGNAVOX
MARANTZ
1006
HITACHI
HONG DENG
IDALL
5021
1016, 1073, 1079
1080, 1095, 1098
1078, 1080
1046, 1069, 1070
1072, 1091
1015, 1017, 1032
1034, 1038, 1065
1067, 1114
1026, 1061, 1062
1090
5036
5038
KEBAO
5021, 5038
5004, 5009, 5017
5021, 5026
5021
MARANTZ
MITSUBISHI
NAD
THORN
MATSUI
MCS
PANASONIC
PHILIPS
RADIOLA
ROWA
SALORA
SEGA
SHARP
SHINCO
SMC
SONY
5004
5203, 5207, 5209
MEMOREX
MERIDIAN
MICROMEGA
MISSION
MITSUBISHI
MTC
5022
TMK
5207
5021
TOMASHI
TOTEVISION
TRIUMPH
TUTUNG
UHER
5212
5021
1019
1085
1017, 1032, 1079
1073, 1096, 1098
1067
1043
1017, 1044, 1089
1102
5203
5021
5201
5014, 5020
5045
5221
5211
NAD
5001
5021
ULTRA
ULTRAVOX
UNIVERSUM
5220
NAIM
5204, 5206, 5216
5218
NIKKO
5024, 5041, 5051
5021
5012, 5013, 5042
5059
5001, 5005, 5008
5019, 5025, 5038
5045, 5046, 5048
5061
NSM
SUPER
5215
ONKYO
VECTOR RESEARCH 1013
VESTEL
VICTOR
TELEFUNKEN
TOSHIBA
PIONEER
5202
1017
5223
OPTIMUS
1016, 1024, 1053
1087
5201,5202, 5208
5214
VIDEOSAT
VIDEOTECHNIC
VIDIKRON
VIDTECH
VISION
VOXSON
WALTHAM
WATSON
WATT RADIO
1086
ORION
1079
PANASONIC
PARASOUND
PHILIPS
PMG
5004, 5037
5045
5021, 5055
5022
1025
1011, 1016, 1062
1098
1055
1079
1017, 1098
1043
POPPY
PROTON
QED
QUAD
QUASAR
RCA
5022
5021
5021
5021
5004,
45
5010, 5025, 5038
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Rest of Your System
REALISTIC
REVOX
5025, 5026, 5045
5021
5021, 5045
5021
5021, 5033, 5038
5025, 5039
5018
5038
5038
5008, 5026, 5058
5015, 5026, 5031
5001, 5027, 5050
5019
5045
5024, 5026, 5044
5045
5004, 5034, 5037
5021
5049
5021
5007, 5028
5047
5011
SAMSUNG
SANSUI
SANYO
6038
MISC AUDIO
TUN
6002
ROTEL
6028
Manufacturer
JERROLD
STARCOM
Code
8201, 8203
8201
SAE
SANSUI
SANYO
SCHNEIDER
SCOTT
SEARS
SHARP
SHERWOOD
SONY
SOUDESIGN
TASCAM
TEAC
SHARP
6019
SONIC
6036
SONY
6012, 6026, 6033
6038
SCIENTIFIC ATLANTA 8202
TEAC
TECHNICS
THORENS
VICTOR
WARDS
YAMAHA
PIONEER
6023
6002
6027, 6030
6001
6006, 6007, 6019
6001, 6008, 6009
6021,
TUN
RECEIVERS
Manufacturer
ADC
AIWA
Code
7042
7012, 7023, 7031
7055, 7064
7011, 7027
7010, 7046
7018, 7048
7059
AKAI
ANAM
DVD
DVD PLAYER
ARCAM
TECHNICS
THORENS
TOSHIBA
UNIVERSUM
YAMAHA
YORX
AUDIOLAB
CAPETRONIC
CARVER
Manufacturer
TOSHIBA
SONY
PANASONIC
KENWOOD
JVC
SAMSUNG
AKAI
HARMAN/KARDON 5314
MAGNAVOX
MITSUBISHI
ONKYO
PROSCAN
RCA
SHARP
THETA DIGITAL
TECHNICS
THOMSON
YAMAHA
PHILIPS
ZENITH
PIONEER
Code
7042
5302
7055, 7059
7008
5306
CURTIS
DAEWOO
DENON
DUAL
EROICA
FANTASIA
FERGUSON
FINE ARTS
FISHER
GARRARD
GOLDSTAR
GOODMANS
GP AUDIO
GRUNDIG
5301, 5322
5307
7032
7001, 7056, 7058
7040
VICTOR
5311, 5318
5313
5316
WARDS
5010, 5021
5005, 5030, 5035
5038, 5048, 5052
5063
7005
PIONEER
7037
7042
5302
5303
7059
7028
CD-R
CD
TAPE DECK
5302, 5317, 5319
5304
7032, 7034, 7035
7010
Manufacturer
ADC
AIWA
Code
6013
6002, 6022, 6017
6018
6015, 6016
6035
6005
5304
7027
7033
7018, 7059
5320
5312
5301
HARMAN/KARDON 7009, 7051
INKEL
JBL
JVC
KENWOOD
AKAI
ANAM
5310
7038, 7040
7009
5301, 5309
5302, 5308
5302, 5315
5305, 5312, 5321
5322
ARCAM
CARVER
DENON
7007, 7036, 7042
7003, 7017, 7025
7026, 7044, 7053
7063, 7066
7037, 7039
7021
7030, 7042, 7055
7059
7004, 7018, 7055
7059
6002, 6028
6005, 6039
6037
DUAL
DYNAMIC BASS
EROICA
6028
LOTTE
LUXMAN
MAGNAVOX
TUN
6041
AMPLIFIER
FISHER
6028
GARRARD
GOLDSTAR
GRUNDIG
6036
Manufacturer
AUDIOLAB
DENON
GRUNDIG
MARANTZ
MICROMEGA
PHILIPS
PIONEER
REVOX
TANDBERG
THORENS
YAMAHA
Code
8005
6036
MARANTZ
6002
8002
HARMON/KARDON 6002, 6014
8005
MCINTOSH
MCS
7020
INKEL
6003
8005
7004
JVC
6027, 6030, 6031
6003, 6004, 6019
6024, 6025
6013
8005
MCSILVER
MICROMEGE
NIKKO
7037
KENWOOD
8005
7018, 7059
7032, 7037, 7046
7017, 7034, 7042
7049, 7052
7013, 7029
7050
7004, 7024, 7041
7018, 7030, 7045
7048, 7051, 7055
7059
8004
KYOCERA
LOTTE
8005
OPTIMUS
6034
8003
LUXMAN
MAGNAVOX
MARANTZ
MEMOREX
MITSUBISHI
NAKAMICHI
NIKKO
OLYMPUS
ONKYO
OPTIMUS
PANASONIC
PHILIPS
6029
8005
ONKYO
6002
8001, 8006
PALLADIUM
PANASONIC
PHILIPS
6002
6008, 6009
6016
6020
6035
PHONOTREND
QUASAR
RCA
RENAISSANCE
REVOX
ROADSTAR
SABA
SAISHO
7038
7004
6029
6010, 6011, 6032
6001, 6021
6023
7006, 7042
7043
7018
6002
7027
RCA
RENAISSANCE
REVOX
6028
7042
6040
7027
6002
SAMSUNG
SANSUI
SANYO
7010
7027, 7055
7028
46
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Rest of Your System
SCHNEIDER
SHARP
SHERWOOD
SOUNDESIGN
SONY
7042
AMERICA ACTION 2059
AMERICAN HIGH 2015
FISHER
2025, 2026, 2030
2037
7017
7038
7049
7015, 7054, 7057
7060
7034
7010, 7035
7004, 7062, 7065
7019, 7024, 7041
7061, 7062, 7065
7018, 7059
7027, 7042, 7050
7007
7002, 7006, 7008
7016, 7017
7002, 7008, 7014
7022, 7042, 7047
7050, 7052
AMSTRAD
2001, 2059, 2067
FRONTECH
FUJI
FUNAI
GARRARD
GE
2011
2068
2015
ANAM
2017, 2042, 2054
2057, 2059, 2082
2084
2001
2001
TAE KWANG
TEAC
TECHNICS
TELEFUNKEN
2015, 2027, 2032
2057
ANAM NATIONAL 2042, 2054, 2087
ANITECH
ASA
ASHA
ASUKA
AUDIOVOX
BAIRD
2034
2017, 2035
2057
2017
2017
2001, 2021, 2037
2039
GEC
2035
2011, 2028
2034
2017, 2018, 2053
2079
2001, 2017, 2034
2059, 2075
2077, 2081
2005, 2021, 2037
2057
2025, 2035, 2037
2001, 2008
2001, 2017, 2034
2017
GENERAL
GOLDHAND
GOLDSTAR
THORENS
UHER
VICTOR
WARDS
YAMAHA
PIONEER
GOODMANS
BASIC LINE
BEAUMARK
BELL & HOWELL
BRANDT
2011, 2034, 2059
2057
GO VIDEO
GRAETZ
2037
2047, 2064, 2065
GRANADA
GRADIENTE
GRANDIN
HANSEATIC
HARMAN/KARDON 2018, 2035
HARLEY DAVIDSON 2001
HARWOOD
HCM
HEADQUARTER
HINARI
BRANDT ELECTRONIC 2021
VCR
VCR
BROKSONIC
2002, 2040, 2046
2052, 2078
2034, 2052, 2059
2072
Manufacturer
PHILIPS
Code
2015, 2035, 2074
2075
BUSH
2034
CALIX
2017
PANASONIC
2015, 2042, 2053
2054, 2055, 2087
2021, 2064, 2074
2001, 2009, 2012
2013, 2014, 2015
2008, 2021, 2033
2049, 2050, 2074
2080
2003, 2005, 2007
2010, 2034, 2035
2048, 2050, 2054
2069, 2071, 2075
2021, 2029, 2038
2060, 2063
2001, 2004, 2021
2022, 2043, 2056
2057
2021, 2023, 2024
2035, 2074
2023, 2027, 2033
2035, 2045
2027, 2073
2002, 2004, 2016
2036, 2046, 2052
2070, 2072, 2078
2025, 2026, 2037
2057
2021, 2039, 2064
2065
2003, 2005, 2010
2014, 2041, 2042
2048, 2054, 2055
2075
2034
CANON
CAPEHART
CARVER
CATRON
CCE
2015
2025
2011
THOMSON
SONY
2004, 2034, 2057
2072
2035
2011
HI-Q
2026
2034, 2059
2001
JVC
HUGHES NETWORK SYSTEMS 2022
CGE
HYPSON
IMPERIAL
INGERSOL
INTERFUNK
ITT
2034
CIMLINE
CINERAL
CITIZEN
CLATRONIC
COLT
2034
2059
2001
GRUNDIG
2004
2017, 2059
2011
2035
2005, 2021, 2025
2037, 2038, 2057
2074
2034
COMBITECH
CONDOR
CRAIG
2072
AKAI
2011
ITV
2017, 2059
2021
2034
2017, 2059
2038, 2052
2018, 2021, 2033
2034
2017, 2026, 2034
2057, 2058
2011, 2034, 2059
2015, 2021, 2032
2042
HITACHI
JENSEN
KAISUI
KEC
CROWN
CURTIS MATHES
TOSHIBA
KENDO
KENWOOD
KLH
KODAK
KORPEL
LAYCO
LENCO
LG
CYBERNEX
CYRUS
DAEWOO
2057
2035
MITSUBISHI
2015, 2017
2034
2011, 2024, 2025
2059, 2083
2034
SHARP
ORION
2034
DANSAI
DAYTRON
DECCA
DE GRAAF
DENON
DUAL
2059
2011
2079
2001, 2035
2022, 2043
2022
SANYO
LLOYD’S
LOEWE
2001, 2051
2004, 2005, 2017
2035
FERGUSON
BLAUPUNKT
2021
LOGIK
LUXOR
2004, 2034, 2057
2023, 2025, 2027
2037, 2038
2017
2001
2059
2001, 2015, 2019
2035
2057
DUMONT
DYNATECH
ELBE
ELCATECH
ELECTROHOME
ELECTROPHONIC 2017
2001, 2035, 2037
2001
2018
LXI
2034
2017
M ELECTRONIC
MAGNASONIC
MAGNAVOX
NOKIA
2025, 2037, 2038
2057
2027, 2052
2001
2059
2001, 2017, 2062
2070, 2072
2034
EMEREX
EMERSON
2012
ADMIRAL
ADVENTURA
AIKO
2001, 2002, 2017
2023, 2040, 2046
2051, 2052, 2059
2078, 2083
2057, 2059
2001
MAGNIN
MANESTH
MARANTZ
2024, 2034
2003, 2005, 2015
2035
AIWA
ESC
AKIBA
ALBA
MARTA
MATSUI
2017
FIDELITY
FINLANDIA
FINLUX
2011, 2034, 2052
2059, 2063, 2072
2011
2004, 2016, 2036
2052, 2070, 2072
2015, 2042, 2055
2015
2035, 2037
2001, 2022, 2035
2037
2017, 2023, 2024
2034, 2052
AMBASSADOR
MATSUSHITA
MEI
MELECTRONIC
FIRSTLINE
47
2018
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Rest of Your System
MEMOREX
2001, 2015, 2017
2019, 2025, 2026
2027, 2037, 2052
2057, 2062, 2085
2087, 2088
REALISTIC
2001, 2015, 2017,
2025, 2026, 2027,
2037
2021, 2074
2075
2014
2017, 2034, 2057
2059
2019
2021, 2049, 2050
2061, 2064, 2065
2074
2004, 2016, 2036
2052
2023, 2025, 2038
2019, 2027
2001, 2021, 2033
2052, 2058, 2078
2024, 2057, 2076
2077
TOWADA
UHER
UNITECH
UNIVERSUM
2066
2057
2057
REX
RFT
RICOH
ROADSTAR
2001, 2006, 2010
2017, 2035, 2038
2048, 2057, 2067
2024
MEMPHIS
METZ
2034
2003, 2005, 2017
2042, 2048, 2055
2069
VECTOR
VECTOR RESEARCH 2018, 2020
RUNCO
SABA
VICTOR
2008, 2021, 2033
VIDEO CONCEPTS 2020, 2024
MGA
2023, 2057
VIDEOSONIC
WARDS
2057
MGN TECHNOLOGY 2057
2001, 2015, 2022
2026, 2027, 2032
2034, 2035, 2057
MINCRVA
MINERVA
MINOLTA
MOTOROLA
MTC
MULTITECH
MURPHY
NAD
2048
2005, 2010, 2048
2022
2015, 2027
2001, 2057
2001, 2034
2001
SAISHO
SALORA
SANKY
SANSUI
WHITE WESTINGHOUSE 2052, 2059
XR-1000
XR-1001
XR-1002
YAMAHA
YAMISHI
YOKAN
YOKO
2001
2015
2034
SAMSUNG
2018
2031
2054
2034
NATIONAL
NEC
SAVILLE
SBR
2072
2035
2034
2018, 2020, 2021
2033, 2037
2035
2011, 2057
2001, 2014, 2019
2052, 2078
2031, 2033, 2035
2044, 2056
SCHAUB LORENZ 2001, 2005, 2021
2037
SCHNEIDER
SCOTT
ZENITH
NECKERMANN
NESCO
NIKKO
NIKON
NOBLEX
NOKIA
2034
2001, 2034, 2035
2023, 2024, 2040
2046
2001, 2015, 2017
2022, 2025, 2026
2037
2057, 2066
2004, 2035
2021
2024
2011
2034, 2037
2057
2004
PIONEER
2017
2014
2057
SEARS
2021, 2025, 2037
2038, 2057
2021, 2061, 2064
2065, 2074
2001, 2021
2063, 2070
2015, 2054
2017, 2027, 2031
2037, 2042, 2077
2086, 2087, 2088
2001, 2017, 2034
2035
TVC
SATELLITE TUNER
TV
NORDMENDE
Manufacturer
ABSAT
AST
Code
4006
4027
4029, 4034, 4037
4052
4019
4003, 4016, 4025
4038, 4039, 4042
4013, 4019, 4030
4044
4009, 4034
4015
4005
SEG
SEI
OCEANIC
OKANO
OLYMPUS
OPTIMUS
SELECO
SEMP
SENTRA
SHINTOM
SHOGUN
SHORAI
SIEMENS
ALBA
ALDES
AMSTRAD
OSAKI
OTTO VERSAND
PALLADIUM
ANKARO
2003, 2005, 2010
2017, 2030, 2035
2037, 2048
2017
2005, 2017, 2021
2034
ANTTRON
ARMSTRONG
ASTRA
SILVA
SINGER
PATHE MARCONI 2021
2024, 2034
2004, 2035
2011
PATHE CINEMA
PENTAX
2016
2022
2015, 2017, 2018
2020, 2022, 2057
2001
ASTRO
4008, 4039, 4045
4031
SINUDYNE
SOLAVOX
SONOLOR
SONTEC
STS
SUNKAI
SUNSTAR
SUNTRONIC
SYLVANIA
AVALON
AXIS
PENNY
4030, 4046
4053
2025
BT
2017
PERDIO
PHILCO
BEKO
4010
2022
2015, 2018, 2052
2078
BEST
4030
2070
BLAUPUNKT
BOCA
4008
2001
PHONOLA
PILOT
PORTLAND
PROFEX
PROFITRONIC
PROLINE
PROSCAN
PROTEC
PULSAR
PYE
2035
4015, 4043
4022
2001
2017
BRAIN WAVE
BRITISH SKY BROADCASTING 4058
2001, 2015, 2023
2035
2011
2066
BUSH
CNT
CAMBRIDGE
4002
4045
4024
SYMHONIC
TASHIKO
TATUNG
TEAC
TEC
TECHNICS
TEKNIKA
2001
2001
2057
2001
2001, 2021, 2035
2001, 2021
2011
2015, 2042, 2054
2001, 2015, 2007
2017, 2028
2021
2021, 2047, 2058
2064, 2074
2034
2001, 2066
2001
2032
CANAL SATELLITE 4059
2034
CANAL+
4059
2019
CHANNEL MASTER 4029
2035
COMLINK
CONNEXIONS
CROWN
4019
4031
QUARTER
QUARTZ
QUASAR
QUELLE
RADIO SHACK
RADIOLA
RADIX
2025
2025
2015, 2042, 2087
2035
2001, 2085
2035
2017
2017
4015
TELEAVIA
TELEFUNKEN
CYRUS
4011
D-BOX
4054
DDC
4029
TENOSAL
TENSAI
THOMAS
THORN
TMK
TOTEVISION
DNT
4011, 4031
4031, 4036, 4061
4034
ECHOSTAR
EMANON
FTE HUMAX
FERGUSON
2016, 2021, 2037
2051, 2057
2017, 2057
RANDEX
RCA
4060
2015, 2022, 2027
2032, 2038, 2057
4002, 4009, 4010
4023
48
FIDELITY
4016
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Rest of Your System
FINLUX
4005, 4024, 4032
4037
SAGEM
4056
MEMOREX
MNET
3001
3009, 3028
3041
3009
3039
3001, 3013
3001
3001
SALORA
4005
FRACARRO
FREECOM
FUBE
G-SAT
GALAXIS
4061
SATCOM
SATEC
SATMASTER
SATPARTNER
4026, 4051
4009
4026
4022, 4034, 4040
4045
4009, 4041
4031, 4046
4030, 4034
4008
4019, 4044, 4051
4017, 4018
4062
4043
4056
4023, 4037
4001, 4039
4026
4034
4015, 4052
4051
4037, 4059
4026, 4053
4027
4040
4022
NOW
4034
OAK
PACIFIC
PANASONIC
PARAGON
PULSAR
PVP STEREO VISUAL
MATRIX
PIONEER
4030, 4031, 4034
4009
4019, 4057, 4060
GENERAL INSTRUMENT 4012
SCHWAIGER
SEEMANN
SEG
SIEMENS
SKYMASTER
SONY
GOLD BOX
GOODING
GOODMANS
GRUNDIG
HINARI
HIRSCHMANN
4059
4048
3002
4010
3010, 3014, 3018
3036
4008, 4010, 4048
4009
QUASAR
3001
4008, 4032, 4039
4040, 4049
4037
STRONG
SUNSTAR
TPS
RADIO SHACK
REMBRANDT
RUNCO
3007
3004
HITACHI
HOUSTON
HUTH
3001
4053
TANTEC
SAMSUNG
SATBOX
SIGNAL
SIGNATURE
STS
SALORA
SCIENTIFIC
SCIENTIFIC ATLANTA 3003, 3008
3021
SEAWOO
STARCOM
STARGATE
STARQUEST
TAIHAN
3014, 3040
3024
4013, 4015, 4019
4026
TECHNISAT
TECHNILAND
TELEFUNKEN
TELEKA
3007
ITT
4005
3004
INVIDEO
INTERVISION
JVC
4061
3015
4050
TELESAT
THOMSON
TONNA
TRIAD
TRIASAT
UNITOR
UNIVERSUM
VENTANA
VORTEC
VTECH
WINERSAT
WISI
3026
4048
3003, 3032, 3049
JOHANSSON
KATHREIN
4022
4004, 4006, 4008
4011, 4035, 4041
4008
3045
KREISELMEYER
KYOSTAR
LA SAT
3002, 3007
3007
4034
4043, 4045
4034
4050
4030
4005, 4049
4037, 4045, 4050
4011
4004, 4023
4024, 4048
4059
4015
4048
4008, 4049
4011
3007
LENCO
4034
3043
LENNOX
4027
TELESERVICE
TELE+1
3022
LUPUS
4022
3028
LUXOR
4008, 4027, 4031
4037
TUDI
3023
MANHATTAN
MARANTZ
MASPRO
MATSUI
TUSA
3007
XSAT
4006, 4065
TOCOM
3005
XCOM MULTIMEDIA 4065
TONGKOOK
TOSHIBA
3042, 3048
3001
ZEHNDER
4033, 4045, 4047
MEDIASAT
MEDIAMARKT
MINERVA
MORGAN’S
NAVEX
NEUHAUS
NEUSAT
NEWHAUS
NIKKO
NOKIA
UNITED CABLE
VIDEOWAY
VISICABLE+
WESTMINSTER
WOLSEY GENE
ZENITH
3002
TVC
CABLE TV
3017
TV
3033
4015, 4043
4022
Manufacturer
ABC
Code
3012
3002, 3003, 3004
3006, 3008
3037
3037
4039
3001, 3034
4057
ANDOVER
BELL & HOWELL
BIRGMINGHAM CABLE
COMMUNICATION 3020
BRITISH TELECOM 3002, 3012
CABLETIME
4013
3006
4028
4005, 4032, 4037
4049, 4054, 4063
4029
NORDMENDE
ORBITECH
OXFORD
3016, 3019, 3025
4039
4024
3029
3009
3011
3038
3043
3003
3027
3007
3028
CONTEC
CLYDE
CRYPTOVISION
DAEHAN
DAERYUNG
DECSAT
EVERQUESST
FILMNET
FRANCE TELECOM 3030
PACE
4002, 4009, 4014
4023, 4037, 4055
4058
PALLADIUM
PALSAT
PANDA
PHILIPS
4048
4039
4037
4007, 4011, 4020
4037, 4048, 4059
4019, 4050
4021, 4059
4061
PHONOTREND
PIONEER
PLANET
PROMAX
PROSAT
QUADRAL
RADIOLA
RADIX
GEC
GEMINI
3011
3007
GENERAL INSTRUMENT 3004, 3020
3031, 3046
4037
4019
GOLDSTAR
GRUNDIG
HITACHI
JASCO
3014, 3047
3035
3004
3007
3002, 3004, 3005
3006, 3007, 3020
3031, 3046
3044
4029, 4044
4011
4031, 4064
4011, 4013, 4019
4027, 4038
4023, 4045
4037
RFT
JERROLD
SAT
SABA
49
SABRE
LG ALPS
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
10
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with
this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other
components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks
listed below, ask your nearest PIONEER authorized service center or your dealer to carry out repair work.
Sound is produced from other components, but not
from LD or DVD player.
• Set SIGNAL SELECT to “DIGITAL” or “ANALOG”
according to the type of connections made (refer to
page 29).
The power does not turn ON.
• Connect the power plug to the wall outlet.
• Disconnect the power plug from the outlet, and insert
again.
• Make sure there are no loose strands of speaker wire
touching the rear panel. This could cause the receiver
to shut off automatically.
• Set the digital input settings correctly (refer to pages
20-21).
• Make digital connections (refer to page 6-7) and set
SIGNAL SELECT to “DIGITAL” (refer to page 29).
• Refer to the instruction manual supplied with the
DVD player.
The unit does not respond when the buttons are
pressed.
No sound is output when a function is selected.
• Make sure the component is connected correctly
(refer to pages 6 to 15).
• Press MUTING on the remote control.
• Adjust MASTER VOLUME.
• Press the MONITOR button.
• Press SPEAKERS to select the speakers you
connected.
No audio is output when software with DTS is
played back.
• Make sure your DVD is digitally connected to this
receiver (refer to page 6-7) and set the SIGNAL
SELECT to “DIGITAL”.
When a search is performed by a DTS compatible
CD player during playback, noise is output.
• This is not a malfunction, but be sure to turn the
volume down to prevent the output of loud noise
from your speakers.
No image is output when a function is selected.
• Make sure the component is connected correctly
(refer to pages 6 to 15).
• Press the correct function button.
Cannot be remote controlled.
Considerable noise in radio broadcasts.
• Tune in the correct frequency.
• Connect the antenna (refer to page 11).
• Route 2 RF and digital cables away from the
antenna terminals and wires.
• Fully extend the FM wire antenna, position for best
reception, and secure to a wall.
• Connect an outdoor FM antenna (refer to page 11).
• Adjust the direction and position for best reception.
• Connect an additional internal or external AM
antenna (refer to page 11).
• Replace the batteries (refer to page 4).
• Operate within 23 feet ( 7 m), 30° of the remote
sensor on the front panel (refer to page 4).
• Remove the obstacle or operate from another
position.
• Avoid exposing the remote sensor on the front panel
to direct light.
The display is dark or off.
• Press FL DIMMER on the remote control repeatedly
to return to the default.
• Turn off the equipment causing the noise or move it
away from the receiver.
• Place the antenna farther away from the equipment
causing the noise.
If the unit does not operate normally due to external
effects such as static electricity.
Disconnect the power plug from the outlet and insert
again to return to normal operating conditions.
Broadcast stations cannot be selected automatically.
• Connect an outdoor antenna (refer to page 11).
No sound from surround or center speakers.
• Refer to “SPEAKERS setting mode” on page 17 to
check the speaker settings.
• Refer to “Setting the volume level of each channel” on
page 21 to check the speaker levels.
• Connect the speakers (refer to page 12,13).
• Make sure that both A and B sets of speakers are not
switched on at the same time (A+B setting).
50
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Specifications
FM Tuner Section
Frequency Range ......................87.5 MHz to 108 MHz
Usable Sensitivity
........................ Mono:13.2 dBf, IHF (1.3 µV/ 75 Ω)
50 dB Quieting Sensitivity ....................Mono: 20.2 dB
Stereo: 38.6 dBf
Signal-to-Noise Ratio ............. Mono: 73 dB (at 85 dBf)
Stereo: 70 dB (at 85 dBf)
Amplifier Section
Continuous average power output of 100 watts
(VSX-D850S is 110 watts)* per channel, min.,
at 8 ohms, from 20 Hz to 20,000 Hz with no
more than 0.2 %** total harmonic distortion
(front).
Distortion .................................. Stereo: 0.5 % (1 kHz)
Alternate Channel Selectivity ............. 60 dB (400 kHz)
Stereo Separation ................................... 40 dB (1 kHz)
Frequency Response ............. 30 Hz to 15 kHz ( 1) dB
Antenna Input (DIN) ........................ 75 Ω unbalanced
Continuous Power Output (VSX-D710S/D810S)
Front............... 100 W per channel (1kHz, 1.0 %, 8 Ω)
Center................................ 100 W (1kHz, 1.0 %, 8 Ω)
Surround ........ 100 W per channel (1kHz, 1.0 %, 8 Ω)
Surround Back ............. 100 W (1kHz, 1.0 %, 8 Ω)***
AM Tuner Section
Continuous Power Output (VSX-D850S)
Frequency Range ...................... 530 kHz to 1,700 kHz
Sensitivity (IHF, Loop antenna) .................... 350 µV/m
Selectivity ........................................................... 25 dB
Signal-to-Noise Ratio .......................................... 50 dB
Antenna ..................................................Loop antenna
Front............... 110 W per channel (1kHz, 1.0 %, 8 Ω)
Center................................ 110 W (1kHz, 1.0 %, 8 Ω)
Surround ........ 110 W per channel (1kHz, 1.0 %, 8 Ω)
Surround Back ................... 110 W (1kHz, 1.0 %, 8 Ω)
Input (Sensitivity/Impedance)
CD, AUX, VCR/DVR, CD-R/TAPE/MD, DVD/LD,
TV/SAT, VIDEO
Miscellaneous
Power Requirements .......................... AC 120 V, 60 Hz
Power Consumption
........................................................ 200 mV/47 kΩ
Frequency Response
VSX-D710S .................................................... 250 W
350 VA
CD, AUX, VCR/DVR, CD-R/TAPE/MD, DVD/LD,
VSX-D810S .................................................... 290 W
420 VA
VSX-D850S .................................................... 290 W
420 VA
TV/SAT, VIDEO
......................................... 5 Hz to 100,000 Hz dB
+0
–3
Output (Level/Impedance)
VCR/DVR REC, CD-R/TAPE/MD REC
....................................................... 200 mV/2.2 kΩ
Tone Control
BASS ............................................... 6 dB (100 Hz)
TREBLE........................................... 6 dB (10 kHz)
LOUDNESS........................ +9 dB (100 Hz/10 kHz)
In Standby ............................................................ 1 W
AC Outlet ......................... 100 W MAX. (SWITCHED)
Dimensions ............. 420 (W) x 158 (H) x 401 (D) mm
(16-9/16 (W) x 6-4/16 (H) x 15-13/16 (D) in.)
Weight (without package)
VSX-D710S .................................. 8.8 kg (19 lb 7 oz)
VSX-D810S ................................ 10.5 kg (23 lb 3 oz)
VSX-D850S ................................ 10.5 kg (23 lb 3 oz)
Signal-to-Noise Ratio (IHF, short circuited, A network)
CD, AUX, VCR/DVR, CD-R/TAPE/MD, DVD/LD,
TV/SAT, VIDEO
.......................................................................96 dB
Signal-to Noise Ratio [EIA, at 1 W (1 kHz)]
CD, AUX, VCR/DVR, CD-R/TAPE/MD, DVD/LD,
TV/SAT, VIDEO
Furnished Parts
FM wire Antenna ....................................................... 1
AM loop Antenna....................................................... 1
Dry Cell Batteries
VSX-D710S/D810S : AA Size / IEC R6P .................. 2
VSX-D850S : AA Size / IEC LR6.............................. 2
Remote Control Unit.................................................. 1
Operating Instructions ............................................... 1
....................................................................... 79 dB
Video Section
Input (Sensitivity/Impedance)
VCR/DVR, DVD/LD, TV/SAT, VIDEO
............................................................ 1 Vp-p/75 Ω
Output (Level/Impedance)
VCR/DVR ............................................. 1 Vp-p/75 Ω
Frequency Response
NOTE:
• Specifications and the design are subject to possible
modifications without notice, due to improvements.
* Measured pursuant to the Federal Trade
Commission’s Trade Regulation rule on Power Output
Claims for Amplifiers.
** Measured by Audio Spectrum Analyzer.
*** VSX-D810S only.
VCR/DVR, DVD/LD, TV/SAT, VIDEO → MONITOR
+0
................................................ 5 Hz to 7 MHz dB
–3
Signal-to-Noise Ratio .......................................... 55 dB
Cross Talk ........................................................... 55 dB
51
En
Download from Www.Somanuals.com. All Manuals Search And Download.
We Want You Listening For A Lifetime
EIA
EST 1924
I
We
Want You
LISTENING
Used wisely, your new sound equipment will provide a lifetime of
fun and enjoyment. Since hearing damage from loud noise is often
undetectable until it is too late, this manufacturer and the Electronic
Industries Association’s Consumer Electronics Group recommend you
avoid prolonged exposure to excessive noise. This list of sound levels is
included for your protection.
For A Lifetime
Selecting fine audio equipment such as the unit you’ve just purchased
isonlythestartofyourmusicalenjoyment. Nowit’stimetoconsiderhow
you can maximize the fun and excitement your equipment offers. This
manufacturer and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your equipment by
playing it at a safe level. One that lets the sound come through loud and
clear without annoying blaring or distortion-and, most importantly,
without affecting your sensitive hearing.
Decibel
Level
Example
30
40
50
60
70
80
Quiet library, soft whispers
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock
at two feet.
Sound can be deceiving. Over time your hearing “comfort level”
adaptstohighervolumesofsound.Sowhatsounds “normal”canactually
be loud and harmful to your hearing. Guard against this by setting your
equipment at a safe level BEFORE your hearing adapts.
THE FOLLOWING NOISES CAN BE DANGEROUS
UNDER CONSTANT EXPOSURE
To establish a safe level:
•
•
Start your volume control at a low setting.
Slowly increase the sound until you can hear it comfortably and
clearly, and without distortion.
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet plane
100
120
140
180
Once you have established a comfortable sound level:
•
Set the dial and leave it there.
Rocket launching pad
Taking a minute to do this now will help to prevent hearing damage
or loss in the future. After all, we want you listening for a lifetime.
Information courtesy of the Deafness Research Foundation.
EIA
EST 1924
I
We
Want You
LISTENING
For A Lifetime
Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer Authorized Independent
Service Company, or if you wish to purchase replacement parts, operating instructions, service manuals, or
accessories, please call the number shown below.
8 0 0 – 4 2 1 – 1 4 0 4
Please do not ship your product to Pioneer without first calling the Customer Service Department at the above
listed number for assistance.
Pioneer Electronics Service, Inc.
Customer Service Department
P.O. BOX 1760, Long Beach,
CA 90801-1760, U.S.A.
For warranty information please see the Limited Warranty sheet included with your product.
Should this product require service in Canada, please contact a Pioneer Canadian Authorized Dealer to locate the
nearest Pioneer Authorized Service Company in Canada.
Alternatively, please contact the Customer Service Department at the following address:
Pioneer Electronics of Canada, Inc.
Customer Service Department
300 Allstate Parkway, Markham, Ontario L3R OP2
(905)479-4411
1(877)283-5901
For warranty information please see the Limited Warranty sheet included with your product.
Si ce produit doit être réparé au Canada, veuillez vous adresser à un distributeur autorisé Pioneer du Canada pour
obtenir le nom du Centre de Service Autorisé Pioneer le plus près de chez-vous. Vous pouvez aussi contacter le
Service à la clientèle de Pioneer:
Pioneer Électroniques du Canada, Inc.
Service à la clientèle
300, Allstate Parkway, Markham, Ontario L3R OP2
(905)479-4411
1(877)283-5901
Pour obtenir des renseignements sur la garantie, veuillez vous reporter au feuillet sur la garantie restreinte qui
accompagne le produit.
S018A2L
Published by Pioneer Corporation.
Copyright © 2000 Pioneer Corporation.
All rights reserved.
PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS [USA] INC.
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A.
PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: [03] 9586-6300
San Lorenzo 1009 3er Piso Desp. 302 Col. Del Valle Mexico D.F. C.P. 03100
TEL: 5-688-52-90
<XRB3004-A>
<TNGZW/00K00001>
Printed in
Download from Www.Somanuals.com. All Manuals Search And Download.
|