PLASMA DISPLAY SYSTEM
SYSTEME D'ÉCRAN PLASMA
SISTEMA DE PANTALLA DE PLASMA
PDP-5030HD
PDP-4330HD
Operating Instructions
Mode d'emploi
Manual de instrucciones
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING: THE APPARATUS IS NOT WATERPROOFS, TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE AND DO NOT PUT ANY WATER SOURCE NEAR THIS
APPARATUS, SUCH AS VASE, FLOWER POT, COSMETICS CONTAINER AND MEDICINE BOTTLE ETC.
NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the
equipment.
[For Canadian model]
This Class B digital apparatus complies with Canadian ICES-003.
CAUTION:
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded
cables and connectors for connections.
FEDERAL COMMUNICATIONS COMMISSION
DECLARATION OF CONFORMITY
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Product Name: Plasma Display System
(Plasma Display)
(Media Receiver)
Model Number: PDP-5030HD
(PDP-503PU)
PDP-4330HD
(PDP-433PU)
(PDP-R03U)
(PDP-R03U)
Product Category: Class B Personal Computers & Peripherals
Responsible Party Name: PIONEER ELECTRONICS (USA), INC., Customer Support Div.
Address: P.O. BOX 1760, LONG BEACH, CA., 90801-1760 U.S.A.
Phone: (800) 421-1625
IMPORTANT NOTICE: The serial number for this equipment is located on the rear panel. Please write this
serial number on your enclosed warranty card and keep it in a secure area. This is for your security.
Download from Www.Somanuals.com. All Manuals Search And Download.
Dear customer
Thank you for your purchase of the PIONEER product. To ensure safety and many years of trouble-free operation
of your product, please read the IMPORTANT SAFETY INSTRUCTIONS carefully before using this product.
Contents
Dear customer ………………………………………1
Contents ………………………………………………1
Important User Guidance Information ……………2
Features ………………………………………………3
Supplied accessories ………………………………4
Plasma Display ……………………………………4
Media Receiver ……………………………………4
Preparation ……………………………………………5
Installing the Plasma Display ……………………5
Setting the system ………………………………6
How to route cables ………………………………7
Using the remote control unit ……………………8
Cautions regarding remote control unit ……8
Inserting the batteries ………………………8
Cautions regarding batteries ………………8
Part names ……………………………………………9
Plasma Display ……………………………………9
Media Receiver ………………………………… 10
Remote control unit …………………………… 11
Watching TV ……………………………………… 12
Basic connection ……………………………… 12
Turning on the power ………………………… 14
Turning off the power ………………………… 14
Initial auto installation ………………………… 15
Simple button operations for changing
Using external equipment ……………………… 34
Watching a DVD image ……………………… 35
Connecting a DVD player ………………… 35
Displaying a DVD image ………………… 35
Watching a VCR image ……………………… 36
Connecting a VCR ………………………… 36
Displaying a VCR image ………………… 36
Watching broadcasts via a Digital tuner …… 37
Connecting a Digital tuner ……………… 37
Displaying broadcasts via a Digital tuner 37
Enjoying a game console or viewing camcorder
images ……………………………………… 38
Connecting a game console or
camcorder …………………………… 38
Displaying an image of the game console
or camcorder images ………………… 38
Viewing an image from a computer ………… 39
Connecting a computer ………………… 39
Displaying an image from a computer … 39
Control cord connection ……………………… 40
Useful adjustment settings ……………………… 41
Image position (AV mode only) ……………… 41
Auto Sync. adjustment (PC mode only) …… 42
Fine Sync. adjustment (PC mode only) ……… 42
Input signal source …………………………… 43
AV SELECTION ………………………………… 44
Wide Mode ……………………………………… 45
Audio out ……………………………………… 46
Sleep timer ……………………………………… 46
Closed caption ………………………………… 47
Parental control (setting V-CHIP level) ……… 48
Secret number setting for parental control
channels …………………………………… 16
Simple button operations for changing
volume/sound ……………………………… 17
Using FRONT SURR(SURROUND) on the
remote control unit ………………………… 18
Setting MTS/SAP stereo mode ……………… 19
Basic adjustment settings ……………………… 20
AV mode menu items ………………………… 20
PC mode menu items ………………………… 21
Moving the picture on the screen …………… 22
Auto installation ………………………………… 23
Channel setup ………………………………… 24
Language setting ……………………………… 26
Picture adjustments …………………………… 27
Color temperature ………………………… 28
Black ……………………………………… 28
3D-Y/C ……………………………………… 29
Black & White ……………………………… 29
PureCinema………………………………… 30
Sound adjustment ……………………………… 31
Power control …………………………………… 32
Power control for AV source ……………… 32
Power control for PC source……………… 33
(AV mode only) …………………………… 52
How to temporarily release
the V-CHIP BLOCK ……………………… 54
Reactivating the temporarily released
V-CHIP BLOCK …………………………… 54
Useful features …………………………………… 55
Multiscreen functions ………………………… 55
Learning remote control function …………… 56
Using the TV remote control unit to
control other device ……………………… 58
Appendix ………………………………………… 64
Troubleshooting ………………………………… 64
Computer compatibility chart ………………… 65
Specifications ………………………………… 66
E-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important User Guidance Information
In order to obtain maximum enjoyment from this Pioneer PureVision PDP-5030HD/PDP-4330HD Plasma Display System, please first read
this information carefully.
With the Pioneer PureVision PDP-5030HD/PDP-4330HD, you can be assured of a high quality Plasma Display System with long-life and
high reliability. To achieve images of exceptional quality, this Pioneer Plasma Display System incorporates state-of-the-art design and
construction, as well as very precise and highly advanced technology. On a total of nearly 3 million light cells, more than 99.999 percent
of the cells remain active.
Over the course of its lifetime, the luminosity of the Pioneer PDP-5030HD/PDP-4330HD Plasma Display System will diminish very slowly,
such as with all phosphor-based screens (for example, a traditional tube-type television). To enjoy beautiful and bright images on your
Pioneer Plasma Display System for many years to come, please carefully read and follow the usage guidelines below.
Usage guidelines
All phosphor-based screens (including conventional tube-type televisions) can be affected by displaying static images for a prolonged
period. Plasma Display Systems are no exception to this rule. After-image and permanent effects on the screen can be avoided by taking
some basic precautions. By following the recommendations listed below, you can ensure longer and satisfactory results from your plasma:
• Whenever possible, avoid frequently displaying the same image or virtually still moving pictures (e.g. closed-captioned images or
video game images which have static portions).
• Avoid viewing the On Screen Display for extended periods, from a Digital tuner, DVD player, VCR and all other components.
• Do not leave the same picture freeze-framed or paused continuously over a long period of time, when using the still picture mode
from a TV, VCR, DVD player or any other component.
• Images which have both very bright areas and very dark areas side by side should not be displayed for a prolonged period of time.
• When playing a game, the “GAME” mode setting within “AV SELECTION” is strongly recommended. However, please limit its use to
less than 2 hours at a time.
• After playing a game, or displaying a PC image or any still image, it is best to view a normal moving picture in the “WIDE” or “FULL”
screen setting for over 3 times longer than the previous still/moving image.
• After using the Plasma Display System, always switch the display to “STAND BY” mode.
Installation guidelines
The Pioneer PureVision PDP-5030HD/PDP-4330HD Plasma Display System incorporates a very thin design. To ensure safety, please take
the proper measures to mount or install the Plasma Display, in order to prevent the unit from tipping over in the event of vibration or
accidental movement.
This product should be installed by using only parts and accessories designed by PIONEER. Use of accessories other than the PIONEER
stand or installation bracket may result in instability, and could cause injury. For custom installation, please consult the dealer where the
unit was purchased. To ensure correct installation, experienced and qualified experts must install the unit. PIONEER will not be held
responsible for accident or damage caused by the use of parts and accessories manufactured by other companies.
To avoid malfunction and overheating when installing, make sure that the vents on the main unit are not blocked. To ensure proper heat
emission:
• Distance the unit slightly from other equipment, walls, etc. more than 10 cm(3 15/16 inch)
• Do not fit the unit inside narrow spaces where ventilation is poor.
• Do not cover with a cloth, etc.
• Clean the vents on the sides and rear of the unit to remove dust build-up by using a vacuum cleaner set to its lowest
suction setting.
Using the unit without proper ventilation may cause the internal temperature to rise, and could result in possible malfunction. When the
surrounding or internal temperature exceeds a certain degree, the display will automatically power off in order to cool the internal electronics
and prevent a hazardous occurrence.
Malfunction can be caused by many factors: inappropriate installation site, improper assembly/installation/mounting, improper operation
of or modifications made to this product. However, PIONEER cannot be held responsible for accidents or malfunction caused by the
above.
A
Typical effects and characteristics of a phosphor-based matrix display such as permanent residual images upon the phosphors of the
panel and the existence of a minute number of inactive light cells in the screen are not covered by local warranties.
About the Plasma Panel’s protection function
The brightness of this display will deteriorate slightly when an image with little movement such as a photograph or computer image is
continuously displayed. This is caused by the Plasma Panel's protection function which detects images with slight movement and
automatically adjusts brightness to protect the display, and is not a malfunction.
This function begins operating when the display detects no or little screen movement for a period of about three minutes.
L
Panel sticking and after-image lag
• Displaying the same images such as still images for a long time may cause after-image lagging. This may occur in the following two
cases.
1. After-image lagging due to remaining electrical load
When image patterns with very high peak luminance are displayed for more than 1 minute, after-image lagging may occur due to the
remaining electric load. The after-images remaining on the screen will disappear when moving images are displayed. The time for the
after-images to disappear depends on the luminance of the still images and the time they had been displayed.
2. After-image (lag image) due to burning
Avoid displaying the same image on the Plasma Display continuously over a long period of time. If the same image is displayed
continuously for several hours, or for shorter periods of time over several days, a permanent after-image may remain on the screen due
to burning of the fluorescent materials. Such images may become less noticeable if moving images are later displayed, but they will not
disappear completely.
• The Energy save function can be set to help prevent damage from screen burning (See page 32-33).
E-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
• New WIDE XGA Plasma Panel
(H:1280 m V:768 pixels, PDP-5030HD)
(H:1024 m V:768 pixels, PDP-4330HD)
• Wide Viewing Angle
• SRS and FOCUS Sound System*1
• Dual TV Tuner
• Picture and Picture, Still Image Function
• 3-Language On Screen Display
• 4 Video Input and PC (XGA) Input
• Component Video Input and RGB Video Input
• Parental Control System (V-CHIP)
• Power-Saving Design
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied accessories
Plasma Display
Power cord
Cleaning cloth
Three speed clamps
Three bead bands
Warranty card
A
• Always use the power cord supplied with the Plasma Display and the one supplied with the Media Receiver for each
respective unit.
Media Receiver
Two AA size batteries
(Alkaline battery)
Power cord
Remote control unit
System cable
Operating instruction
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Installing the Plasma Display
Locating
• Avoid the direct sunlight. Keep enough ventilation.
• The length of the system cable used to connect the
Plasma Display and the Media Receiver is about 3
m (118 inch).
Over 50 cm
(19 11/16 inch)
• Because the Plasma Display is heavy, be sure to
move it by more than two persons.
L
Over
• If you place anything on top of the Media Receiver it will
not receive enough ventilation and not operate properly.
10 cm
(3 15/16
inch )
A
• Keep enough space around the upper and back parts
when installing in order to ensure ventilation around the
backside.
Using the optional PIONEER stand
• For details on installation refer to the instruction
manual provided with the stand.
L
• This product may be used only with model PDK-TS01
stand, use with other stands may result in instability
causing possible injury.
Using the optional PIONEER speakers
• For details on installation refer to the instruction
manual provided with the speaker.
L
Operating Environment
Operating environment temperature and humidity: e0°C to
e40°C (e32F to e104F); less than 20 % to 80% RH (cooling
vents not blocked)
Avoid installing in the following locations:
• Under direct exposure to sunlight,
• Under strong artificial light,
• In high humidity,
• Poorly ventilated.
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Setting the system
1. Connecting the system cable and the power cord to the Plasma Display
Plasma Display (rear view)
For details on optional
PIONEER speaker
installation refer to the
speaker instruction
manual provided.
(bottom view)
(WHITE)
(GRAY)
Power cord
System cable
L
• THESE SPEAKER TERMINALS CAN BE UNDER HAZARDOUS VOLTAGE WHENYOU CONNECT OR DISCONNECT
THE SPEAKER CABLES. TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT TOUCH UNINSULATED PARTS
BEFORE DISCONNECTING THE POWER CORD.
2. Connecting the system cable and the power cord to the Media Receiver
System cable
(GRAY)
(WHITE)
Media Receiver (rear view)
COMPONENT VIDEO
Y
P
B
PR
SYSTEM
CABLE
INPUT 3
(WHITE)
RS-232C
A
B
(GY)
INPUT 1
INPUT 2
RGB INPUT
IN
OUT
CONTROL
OUT ANT/CABLE 75Ω
AC ILET
MONITOR OUTPUT S-VIDEO
VIDEO
R-AUDIO-L
S-VIDEO
VIDEO
R-AUDIO-L
Power cord
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
How to route cables
Speed clamps and bead bands are included with this System for bunching cables. Once properly bunched,
follow the steps below to route the cables.
As viewed from the rear of the display.
To the left
System cable
Speed clamps
Bead bands
Speaker cable
To the right
Speaker cable
Speed clamps
Bead bands
System cable
Bunch cables using provided speed clamps
Attaching speed clamps to the main unit
Connect the speed clamps using the 4 holes marked with • below, depending on your routing system.
Attaching and removing speed clamps
Insert 1 into an appropriate hole on the rear of the Plasma Display and snap 2 into the back of 1 to fix the
clamp.
Speed clamps are designed to be difficult to undo once in place. Please attach carefully.
Use pliers to twist the clamp 90°, pulling outward. The clamp may deteriorate over time and become damaged
if removed.
2
1
Gather cables into a bunch, secure with provided bead bands
A
• Cables can be routed to the right or left.
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Using the remote control unit
Use the remote control unit by pointing it towards the remote sensor window.
Objects between the remote control unit and sensor window may prevent proper
operation.
Cautions regarding remote control unit
• Do not expose the remote control unit to shock. In addition, do not expose the
remote control unit to liquids, and do not place in an area with high humidity.
• Do not install or place the remote control unit under direct sunlight. The heat
may cause deformation of the unit.
• The remote control unit may not work properly if the remote sensor window of
the Plasma Display is under direct sunlight or strong lighting. In such case,
change the angle of the lighting or Plasma Display set, or operate the remote
control unit closer to the remote sensor window.
Inserting the batteries
If the remote control unit fails to operate Plasma Display System functions,
replace the batteries in the remote control unit.
1 Open the battery cover.
2 Insert batteries (two AA size 3 Close the battery cover.
batteries supplied with product).
_
+
+
_
• Place batteries with their terminals
corresponding to the (e) and (f)
indicators in the battery compartment.
Cautions regarding batteries
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not use manganese batteries. When you replace the batteries, use alkaline ones.
• Place the batteries with their terminals corresponding to the (e) and (f) indicators.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
chemical leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you
find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you do not plan to use the remote control unit for an extended period of time, remove the batteries from it.
L
• WHEN DISPOSING OF USED BATTERIES, BE SURE TO COMPLY WITH GOVERNMENT REGULATIONS AND
ENVIRONMENTAL PROTECTION GUIDELINES THAT APPLY IN YOUR COUNTRY OR AREA.
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Part names
Plasma Display
STANDBY/ON INPUT
CHANNEL
VOLUME
STANDBY/ON
Power indicator
INPUT button
VOLUME s/r buttons
MAIN POWER button
STANDBY/ON button
CHANNEL s/r buttons
Remote control sensor
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Part names
Media Receiver
Front view
INPUT 4 terminal (VIDEO)
PC INPUT terminal (ANALOG RGB)
CLEAR*
Push CLEAR lightly with the tip
of a pointed object like a
ballpoint pen.
MEDIA RECEIVER PDP-R03U
STANDBY/ON
POWER
PC INPUT terminal (AUDIO)
INPUT 4 terminals (AUDIO)
INPUT 4 terminal (S-VIDEO)
POWER button
* If you’re having problems operating the Media Receiver and want to return to normal screen, even when it
stays on (the indicator lights green), press CLEAR on the Media Receiver. Pressing CLEAR resets the System
as shown below.
• AV SELECTION resets to STANDARD
• TV channel returns to initial channel setting(Air:2ch, Cable:1 or 2ch)
• Multiscreen resets to normal
• Audio setting initializes
• SRS resets to Off.
• Image position initializes
A
• Pressing CLEAR will not work if the System is in standby mode but the indicator lights red.
• Pressing CLEAR will not delete channel preset or secret number. See Page 53 for initializing factory preset settings when
you know your secret number. See Page 67 for initializing factory preset values when you have forgotten your secret
number.
Rear view
Antenna input
terminal (A)
INPUT 1 COMPONENT VIDEO
terminals (Y, PB, PR)
INPUT 3 COMPONENT
VIDEO terminals (Y, PB, PR)
INPUT 3 terminals
(AUDIO)
INPUT 1 terminal
(S-VIDEO)
SYSTEM CABLE
terminal (WHITE)
Antenna input
INPUT 1 terminals
(AUDIO)
terminal (B)
INPUT 3 terminal
(VIDEO)
RS-232C terminal
INPUT 1 terminal
(VIDEO)
(used in the factory setup)
INPUT 3 terminal
(S-VIDEO)
COMPONENT VIDEO
Y
PB
PR
SYSTEM
CABLE
INPUT 3
(WHITE)
RS-232C
A
B
(GRAY)
INPUT 1
INPUT 2
RGB INPUT
OUT
IN
CONTROL
OUT ANT/CABLE 75Ω
AC INLET
MONITOR OUTPUT S-VIDEO
VIDEO
R-AUDIO-L
S-VIDEO
VIDEO
R-AUDIO-L
MONITOR OUTPUT
terminal (S-VIDEO)
INPUT 2 terminals
(AUDIO)
AC INLET terminal
INPUT 3
RGB INPUT
terminal
MONITOR OUTPUT
terminal (VIDEO)
INPUT 2 terminal
(VIDEO)
SYSTEM CABLE terminal
(GRAY)
CONTROL terminals
(IN/OUT)
MONITOR OUTPUT
terminals (AUDIO)
INPUT 2 terminal
(S-VIDEO)
Antenna output
terminal
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Part names
Set the mode switch to TV.
Remote control unit
1
2
3
TV a: Switch the Plasma Display power on or off.
FRONT SURR: Set SRS and FOCUS Sound System.
1 2412 13
Mode switch
AV SELECTION: Select an audio or video setting.
(AV mode: STANDARD, DYNAMIC,
MOVIE, GAME, USER.
14
15
TV CBL VCR DVD
2
/SAT
/DTV
/LD
TV
PC mode: STANDARD, USER.)
ANT
INPUT
4
5
6
7
8
9
SCREEN MODE: Select the screen size.
DISPLAY: Display the channel information.
SLEEP: Set the SLEEP timer.
CH RETURN: Return to the previous channel.
CH k/l: Select the channel.
FRONT
SURR
AV
MTS
CC
16
3
SELECTION
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
17
INPUT
4
5
DISPLAY
EDIT/ LEARN
MENU: Display the menu screen.
10 MENU RETURN: Return to the previous menu screen.
11 a/b/c/d: Select a desired item on the setting screen.
12 ANT: Select the antenna. (A, B) (See page 12 for details)
1
2
5
8
3
6
9
4
6
18
19
13 INPUT: Select an input source of the Plasma Display.
(TV, INPUT 1, INPUT 2, INPUT 3, INPUT 4, PC)
7
14
: When pressed all buttons on the remote control unit
will light. The lighting will turn off if no operations
are performed within about 5 seconds. This button
is used for performing operations in dark places.
CH
ENTER
0
7
8
CH
CH
VOL
RETURN
15 MTS: Select the MTS/SAP.
16 CC: Display captions during closed-caption source.
17 Dual picture mode select buttons
SPLIT: Set the dual picture mode. Press again to return
to normal screen.
20
21
MUTING
9
10
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
FREEZE: Set the still image. Press again to return to
normal screen.
SELECT: Select the active screen.
SUB INPUT: Select an input source of sub screen.
SUB CH k/l: Select the channel of sub screen.
SOURCE
DTV/SAT
GUIDE
SET/
ENTER
11
22
23
DTV/SAT
INFO
18 0 – 9: Set the channel.
19 CH ENTER: Execute a channel number.
20 VOL k/l: Set the volume.
VCR REC
FAVORITE CH
A
B
C
D
INPUT
VOL
VOL
21 e MUTING: Mute the sound.
22 SET/ENTER: Execute a command.
RECEIVER
23 FAVORITE CH
A, B, C, D: Select any of four preset channels. (See
page 25 for ditails to set the FAVORITE CH.)
While watching you can toggle the set channels by
pressing A, B, C and D.
PLASMA DISPLAY
24 LED for transmission confirmation
A
• When using the remote control unit, point it at the Plasma
Display.
• See pages 56 to 63 for operating buttons not listed on
this page.
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
WatchingTV
Simple operations for watching a TV program
Basic connection
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections
that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector,
plug it into the antenna terminal at the rear of the Media Receiver.
A
The coaxial cable is already
connected at the time of
purchase.
• The Antenna and CABLE Converter cannot be connected at the same time.
Connecting VHF/UHF antenna
B
A
VHF antenna
UHF antenna
OUT
U/V mixer
Media Receiver (rear)
Connecting the CABLE Converter
CABLE TV
A
B
CABLE Converter
OUT
Media Receiver (rear)
A
• Be sure connect the Antenna or the CABLE Converter as explained above. Signal reception may fail if not properly
connected.
• Be sure that the CABLE Converter output signal is assigned to the ANT-B input on the Media Receiver.
• How to change channels when the CABLE Converter output signal is connected to the ANT-B input on the Media Receiver.
•Press ANT on the remote control unit to switch to ANT-B.
•You can view an image right after selecting the output channel on the CABLE Converter.
Switching between Tuner A and Tuner B
To watch broadcasts via the two tuners, you can select it by pressing ANT on the remote control unit.
• While watching a broadcast press ANT to view the image received from the other tuner.
• Pressing ANT while viewing in Dual Screen mode (TV image and video image) with TV selected will display the TV image
of the other tuner.
• Pressing ANT while viewing Dual Screen with video selected will not change the image displayed.
• Pressing ANT while viewing Dual Screen with two TV images displayed will not have any effect.
• Pressing ANT while viewing Dual Screen with two video images displayed will switch the selected screen to a TV image.
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Connecting the power cord
Connect the power cord after all component connections have been completed.
Plasma Display (bottom view)
AC INLET
Power cord
Media Receiver (rear view)
COMPONENT VIDEO
Y
P
B
PR
SYSTEM
CABLE
INPUT
3
RS-232C
(GRAY)
(WHITE)
A
B
INPUT
INPUT
1
2
RGB INPUT
IN
CONTROL
OUT
OUT ANT/CABLE 75Ω
AC INLET
MONITOR OUTPUT S-VIDEO
VIDEO
R-AUDIO-L
S-VIDEO
VIDEO
R-AUDIO-L
AC INLET
Power cord
L
• Use only the power cord provided.
• Do not use a power supply voltage other than that indicated (AC 120 V, 60 Hz) as this may cause fire or electric shock.
• For the Plasma Display System, a three-core power cord with a ground terminal is used for efficiency protection. Always
be sure to connect the power cord to a three-pronged outlet and make sure that the cord is properly grounded. If you use
a power source converter plug, use an outlet with a ground terminal and screw down the ground line.
A
• Always turn off the main power of Plasma Display and Media Receiver when connecting the power cords.
• Disconnect the power cord from the power outlet when the Plasma Display System is not going to be used for a long
period of time.
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Plasma Display
Turning on the power
1 Press MAIN POWER on the Plasma Display.
• The power indicator on the Plasma Display flashes red.
STANDBY/ON INPUT
CHANNEL
VOLUME
STANDBY/ON
2 Press POWER on the Media Receiver.
• The System turns the power on.
STANDBY/ON
• The power indicators on the Plasma Display and Media
Receiver lights up green.
• If the power indicators still light up red, press TV a on
the remote control unit or STANDBY/ON on the Plasma
Display to turn the System on.
Power indicator
MAIN POWER
First time turning on Media Receiver
Media Receiver
MEDIA RECEIVER PDP-R03U
1 Press POWER on the Media Receiver.
PUSH
STANDBY/ON
POWER
PLASMA DISPLAY SYSTEM
• The power indicator on the Media Receiver lights up
red.
2 Press MAIN POWER on the Plasma Display.
POWER
Power indicator
• The System turns the power on.
• The power indicators on the Plasma Display and Media
Receiver lights up green.
• If the power indicators still light up red, press TV a on
the remote control unit or STANDBY/ON on the Plasma
Display to turn the System on.
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
AV
A
ANT
INPUT
• In this manual, “System” mean the Plasma Display Panel and
Media Receiver.
FRONT
SURR
MTS
CC
SELECTION
Turning off the power
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
1 Press TV a on the remote control unit or STANDBY/
INPUT
ON on the Plasma Display.
DISPLAY
EDIT/ LEARN
• The System enters standby mode and the image on
the screen disappears.
1
2
5
8
0
3
6
9
• Both power indicators change from green to red.
2 Press POWER on the Media Receiver.
4
• The power indicator on the Media Receiver turns off
and the one on the Plasma Display flashes red.
7
3 Press MAIN POWER on the Plasma Display.
CH
ENTER
• The power indicator on the Plasma Display turns off
after approximately 5 seconds.
A
• If you are not going to use this System for a long time, be sure to
remove the Power cord from the power outlet.
Plasma Display status indicators
Off
Power off
Flashing red
Red
Media Receiver does not turn on or its power cord is disconnected.
The Plasma Display System is in standby mode.
Green
The Plasma Display System turns the power on.
Media Receiver status indicators
Power off
Off
Only the Media Receiver is in standby mode or the Plasma Display System is in standby mode.
The Plasma Display System turns the power on.
Red
Green
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Initial auto installation
When you turn on the Plasma Display System for the first time, it will automatically memorize the broadcasting
channels where you live. Perform the following steps before you press TV a.
1. Insert the batteries into the remote control unit. (See page 8.)
2. Connect the antenna cable to the Media Receiver. (See page 12.)
3. Plug in the power cord to the wall outlet. (See page 13.)
Language menu
1. Setting a language
1 Press a/b to select the desired language listed
Language
on the screen.
English
2 Press SET/ENTER to enter the setting.
Français
Español
Antenna menu
2. Setting the antenna mode
1 Press a/b to select “Air” or “Cable” on the screen.
Air/Cable
2 Press SET/ENTER to enter the setting.
Air
Cable
Searching TV channels
3. Automatic channel searching
Channel auto search makes the Plasma Display System
look for all channels viewable in the set area.
CH Search
Air
2
A
• If no channel is found, “No program found. Is antenna
connected properly?” displays. And the auto channel
search finishes.
• If you want to try auto installation again, see page 23.
• Channel search function is available for ANT-A only.
• ANT-B cannot perform channel search.
• You may need to manually add the CABLE Converter
output channel setting (fixed), when connecting the CABLE
Converter output signal to the B terminal (ANT/CABLE
75q) on the Media Receiver (Rear).(See page 25.)
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Plasma Display
Simple button operations for changing
channels
STANDBY/ON INPUT
CHANNEL
VOLUME
Using CHk/l on the remote control unit
• Press CHk to increase channel number.
• Press CHl to decrease channel number.
STANDBY/ON
CHANNEL
/
A
• CHANNEL s/r on the Plasma Display operates the
same as CHl/k.
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
ANT
INPUT
FRONT
SURR
AV
MTS
CC
SELECTION
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
INPUT
DISPLAY
EDIT/ LEARN
Using CH RETURN on the remote control
unit
Press CH RETURN to switch the currently tuned
channel to the previously tuned channel.
Press CH RETURN again to switch back to the
currently tuned channel.
1
2
5
8
3
6
9
4
7
CH
ENTER
0
CH
CH
VOL
RETURN
MUTING
Channel display
Using 0 – 9 on the remote control unit
Select the channels directly by pressing buttons 0 to
9.
38
ANT-A
STEREO
a
• To select channel 8, a 1-digit channel, press 8.
• To select channel 38, a 2-digit channel, press 3,
followed by 8.
• To select channel 138, a 3-digit channel, press 1,
then 3, followed by 8.
• You can tune in channels more quickly if you press
CH ENTER after pressing 0 to 9.
E-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Plasma Display
Simple button operations for changing
volume/sound
STANDBY/ON INPUT
CHANNEL
VOLUME
Using VOL k/l on the remote control unit
• To increase the volume, press VOL k.
• To decrease the volume, press VOL l.
STANDBY/ON
VOLUME
/
A
• VOLUME s/r on the Plasma Display operates the same
as VOL l/k.
Audio status
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
Audio out
ANT
INPUT
Output device
FRONT
SURR
Fixed
Variable
AV
MTS
CC
SELECTION
Variable sound
Speaker
Mute
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
Constant as
specified
MONITOR OUT
INPUT
Variable sound
DISPLAY
EDIT/ LEARN
* When “Audio Out” is set to “Variable”, the indicator on the
screen changes as shown below.
1
2
5
8
3
6
9
4
7
20
CH
ENTER
0
CH
CH
VOL
RETURN
A
• See page 46 for details on the audio out function.
MUTING
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
Volume adjustment
Using e MUTING on the remote control unit
e mutes the current sound output.
1 Press e MUTING.
• “M” displays on the screen for 8 minutes, muting the
sound.
20
• When mute mode finishes, the volume level is set to 0,
preventing the system from suddenly outputting a loud
sound.
2 Press e MUTING again to cancel the mute.
• Pressing VOL k/l and MTS (TV mode only) can also
cancel the mute.
Mute
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Using FRONT SURR (SURROUND) on
the remote control unit
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
ANT
INPUT
h produces SRS and FOCUS effect from the
speakers. Each time you press FRONT SURR
(SURROUND), the mode changes among SRS,
FOCUS, FOCUS e SRS and Off.
FRONT
SURR
AV
MTS
CC
SELECTION
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
INPUT
SRS sound options
DISPLAY
EDIT/ LEARN
• SRS (Sound Retrieval System): Creates a more
natural sound, retrieving the spatial information
from any stereo recording and restoring the
original three-dimensional sound field.
• FOCUS: Repositions a sound image from two
speakers to a more optimal listening position or
height without moving them.
• FOCUS e SRS: Produces both SRS and FOCUS
effects.
• Off: Outputs the normal sound.
1
2
5
8
0
3
6
9
4
7
CH
ENTER
: Off
: SRS
: FOCUS
: FOCUS
SRS E-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Setting MTS/SAP stereo mode
The Plasma Display System has a feature that allows reception of sound other than the main audio for the
program. This feature is called Multi-channel Television Sound(MTS). The Plasma Display System with MTS can
receive mono sound, stereo sound and Secondary Audio Programs (SAP). The SAP feature allows a TV station
to broadcast other information, witch could be audio in another language or something completely different like
weather information.
You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.
• Stereo broadcasts
View programs like live sporting events, shows and concerts in dynamic stereo sound.
• SAP broadcasts
Receive TV broadcasts in either MAIN or SAP sound.
MAIN sound: The normal program soundtrack (either in mono or stereo).
SAP sound: Listen to second language, supplementary commentary and other information. (SAP is mono sound.)
If stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching to fixed mono-sound mode.
A
• Once “MONO” mode is selected, the Plasma Display System sound remains mono even if the System receives a stereo
broadcast. You must switch the mode back to “STEREO” if you want to hear stereo sound again.
• Selecting MTS while in the input mode does not change the type of sound. In this case, sound is determined by the video
source.
Each time you press MTS, MTS toggles as shown
below.
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
ANT
INPUT
FRONT
SURR
AV
MTS
CC
SELECTION
SPLIT
FREEZE
SELECT
SCREEN
MODE
SUB
SUB CH
INPUT
STEREO mode
MAINkSAP mode
STEREOkSAP mode
MONO mode
38
38
38
ANT-A
ST(SAP)
38
ANT-A
MONO
ANT-A
ANT-A
MAIN
STEREO
38
ANT-A
STEREO
38
ANT-A
SAP
38
ANT-A
SAP(ST)
38
ANT-A
MONO
38
ANT-A
MONO
38
ANT-A
MONO
38
ANT-A
MONO
38
ANT-A
MONO
E-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
AV mode menu items
List of AV menu items to help you with operations.
Page 32
MENU
Description
Power Control
Energy Save
No Signal off
No Operation off
RETURN
[Standard]
[Disable]
[Disable]
Save power by decreasing picture
brightness.
Energy Save
System automatically shuts down if
no signal inputs for 15 minutes.
No Signal off
System automatically shuts down if
you do not operate the System for 3
hours.
No Operation off
Page 27–30
Picture
Description
MENU
Adjusts the picture between light and
shade.
USER
Contrast [+30]
Contrast
0
+40
+30
+30
+30
+7
Bright
Color
Adjusts picture brightness.
Adjusts color intensity.
Bright
[0]
[0]
[0]
[0]
–30
–30
–30
–7
Color
Adjusts skin color to a more natural
tone.
Tint
Tint
Adjusts picture sharpness.
Sharp
Sharp
Adjusts color temperature, black,
3D-Y/C and black & white and
PureCinema.
Advanced
Reset
Advanced
Reset
First MENU
All image adjustment settings return
to the factory preset values.
RETURN
MENU
Power Control
Page 31
Picture
Audio
Setup
Option
Audio
Description
MENU
Treble
Bass
Adjusts the treble weaker or stronger.
USER
Treble
[0] –15
[0] –15
[0] Left
+15
Adjusts the bass weaker or stronger.
Bass
+15
Adjusts audio output between left
and right speakers.
Balance
Reset
Balance
Reset
Right
All audio adjustment settings return
to the factory preset values.
RETURN
Page 23–25, 48–54
Setup
Description
MENU
Auto Installation
CH Setup
Automatically memorizes the
broadcasting channels where you
live.
Auto Installation
Parental CTRL
RETURN
Sets the channel preset.
CH Setup
Parental CTRL
Sets a secret number to restrict
operations.
Page 26, 41, 43, 46
Option
Description
MENU
Input Select
Position
Select the kind of input signal of each
input source.
Input Select
Audio Out
Demo
[Fixed]
[Off]
Adjusts the horizontal/vertical
position of the image displayed.
Position
Select the type of monitor output. You
can adjust volume for the main
speaker or monitor output.
Language
RETURN
[English]
Audio Out
Demonstration setting for storefront
displays.
Demo
Select the on screen display
language.
Language
E-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
PC mode menu items
List of PC menu items to help you with operations.
Page 33
Power Control
Description
MENU
Energy Save
Power Management
RETURN
[Standard]
Save power by decreasing picture
brightness.
Energy Save
[Off]
System automatically shuts down if
you set the time. Select Mode1 or
Mode2.
Power
Management
Page 27
Picture
MENU
Description
Adjusts the picture between light and
shade.
USER
Contrast [+30]
Contrast
0
+40
+30
+30
+30
+30
Adjusts picture brightness.
Adjusts red color intensity.
Adjusts green color intensity.
Adjusts blue color intensity.
Bright
Red
Bright
Red
[0]
[0]
[0]
[0]
–30
–30
–30
–30
Green
Blue
Green
Blue
Reset
RETURN
All image adjustment settings return
to the factory preset values.
Reset
First MENU
MENU
Power Control
Picture
Audio
Page 31
Audio
Description
MENU
Option
Adjusts the treble weaker or
stronger.
USER
Treble
Treble
Bass
[0] –15
[0] –15
[0] Left
+15
Adjusts the bass weaker or stronger.
Bass
+15
Adjusts audio output between left
and right speakers.
Balance
Reset
Right
Balance
All audio adjustment settings return
to the factory preset values.
RETURN
Reset
Page 42, 46
Option
Description
MENU
Auto Sync.
Fine Sync.
Audio Out
RETURN
Provides a clear input image.
Auto Sync.
[Fixed]
Adjusts image H-Pos, V-Pos, clock
and phase.
Fine Sync.
Audio Out
After selecting type of monitor output,
adjusts the volume of the main
speaker or monitor output.
E-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Moving the picture on the screen
You can move the picture around on the screen.
Press a/b/c/d to move an image on the screen to
the desired position.
CH
CH
VOL
RETURN
A
MUTING
• While pressing a/b/c/d, an on-screen image,
“Adjusting Position” displays to the desired position.
• This setting cannot be stored. Once the System shuts
down or enters standby mode, the setting is erased. To
move the picture around the screen again, you must
perform the above procedure again.
• An on-screen image from a PC source cannot be moved
around.
• Initialize the image position by pressing SET/ENTER.
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
SOURCE
DTV/SAT
GUIDE
SET/
ENTER
DTV/SAT
INFO
VCR REC
FAVORITE CH
A
B
C
D
INPUT
VOL
VOL
RECEIVER
PLASMA DISPLAY
E-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Auto installation
You can run auto installation again, even after setting up the preset channels.
Secret number
Language setting
Select from among 3 languages: English, French and
Spanish.
setting menu
1
4
7
2
5
8
0
3
6
9
MENU
Setup
1 Press MENU.
Secret No.
– – – –
2 Press a/b to select “Setup”, and then press SET/
ENTER.
CH
ENTER
Setup menu
• Secret number setting menu displays only when
“Secret No.” is set. (See page 52.)
• Setup menu displays when the “Secret No.” is not set.
Skip step 3.
MENU
Setup
CH
CH
VOL
RETURN
Auto Installation
CH Setup
MUTING
3 Enter your 4-digit secret number with 0 – 9 to cancel
the “Secret No.” when you set it.
Parental CTRL
RETURN
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
4 Press a/b to select “Auto Installation”, and then
press SET/ENTER.
SOURCE
DTV/SAT
GUIDE
• Language menu displays.
SET/
ENTER
DTV/SAT
INFO
5 Press a/b to select the desired language listed
on the screen, and then press SET/ENTER.
VCR REC
FAVORITE CH
• Antenna menu displays.
A
• Return to the previous menu by pressing MENU RETURN.
Language menu
Language
English
Français
Español
Antenna menu
Antenna setting
After setting the language, perform settings for the
Antenna connected.
Press a/b to select the desired item, and then press
SET/ENTER.
Air/Cable
Air
Cable
• After setting the Antenna, channel search starts.
A
• Return to the previous menu by pressing MENU RETURN.
Searching TV channels
Channel search
After performing language and Antenna settings, the
Plasma Display System's channel auto search
automatically looks for all viewable channels in the set
area.
CH Search
Air
2
E-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Channel setup
If initial auto installation does not memorize all the channels in your region, follow the instructions below to
manually memorize the channels.
Setting the Air/Cable
1 Press MENU.
MENU
Setup
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
ANT
INPUT
CH Setup
Air/Cable
Air
2 Press a/b to select “Setup”, and then press SET/
FRONT
SURR
[Air]
AV
MTS
CC
ENTER.
SELECTION
• Secret number setting menu displays only when
“Secret No.” is set. (See page 52.)
• Setup menu displays when the “Secret No.” is not set.
Skip step 3.
SPLIT
FREEZE
SLEEP
SELECT
Cable
SCREEN
MODE
SUB
SUB CH
INPUT
DISPLAY
EDIT/ LEARN
3 Enter your 4-digit secret number with 0 – 9 to cancel
the “Secret No.” when you set it.
1
2
5
8
3
6
9
4 Press a/b to select “CH Setup”, and then press
4
SET/ENTER.
5 Press a/b to select “Air/Cable”, and then press
SET/ENTER.
7
CH
ENTER
6 Press a/b to select the desired item, and then
0
press SET/ENTER.
CH
CH
VOL
7 Press MENU to exit the menu.
RETURN
MUTING
A
• Return to the previous menu by pressing MENU RETURN.
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
SOURCE
DTV/SAT
GUIDE
Automatic channel searching
MENU
Setup
Channel auto search makes the Plasma Display
System look for all channels viewable in the set area.
SET/
ENTER
DTV/SAT
INFO
CH Setup
Air/Cable
CH Search
CH Memory
Favorites
RETURN
1 Press MENU.
[Air]
VCR REC
FAVORITE CH
2 Press a/b to select “Setup”, and then press SET/
A
B
C
D
ENTER.
INPUT
VOL
VOL
RECEIVER
• Secret number setting menu displays only when
“Secret No.” is set. (See page 52.)
• Setup menu displays when the “Secret No.” is not set.
Skip step 3.
PLASMA DISPLAY
3 Enter your 4-digit secret number with 0 – 9 to cancel
the “Secret No.” when you set it.
4 Press a/b to select “CH Setup”, and then press
SET/ENTER.
5 Press a/b to select “CH Search”, and then press
SET/ENTER.
• Channel search automatically starts.
6 Press MENU to exit the menu.
A
• Return to the previous menu by pressing MENU RETURN.
• Channel search function is available for ANT-A only.
• ANT-B cannot perform channel search.
• You may need to manually add the Cable Converter
output channel setting (fixed), when the Cable
Converter using.(See page 25.)
E-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Saving broadcast TV channels to memory
1 Press MENU.
MENU
Setup
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
CH Setup
Air/Cable
CH Search
CH Memory
Favorites
RETURN
2 Press a/b to select “Setup”, and then press SET/
ANT
INPUT
[Air]
FRONT
SURR
ENTER.
AV
MTS
CC
• Secret number setting menu displays only when
“Secret No.” is set. (See page 52.)
• Setup menu displays when the “Secret No.” is not set.
Skip step 3.
SELECTION
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
INPUT
3 Enter your 4-digit secret number with 0 – 9 to cancel
the “Secret No.” when you set it.
4 Press a/b to select “CH Setup”, and press SET/
ENTER.
DISPLAY
EDIT/ LEARN
MENU
Setup
1
2
5
8
3
6
9
CH Setup
CH Memory
Air
4
5 Press a/b to select “CH Memory”, and press SET/
[
2]
ENTER.
Skip
[Off]
7
RETURN
6 Press a/b to select “Air[2]”.
CH
ENTER
7 Press c/d to select the channel you want to skip
0
MENU
Setup
or not.
CH
8 Press a/b to select “Skip”, and press SET/ENTER.
CH
VOL
RETURN
CH Setup
CH Memory
Skip
9 Press a/b to select “On” or “Off” , and press SET/
MUTING
ENTER.Repeat the same steps for other channels.
• On: Skips channels. (Channel selection disabled using
CHk/l and SUB CHk/l.)
[Off]
Off
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
On
• Off: Does not skip channels. ( Channel selection enabled
using CHk/l and SUB CHk/l.)
A
• Return to the previous menu by pressing MENU RETURN.
• Channel memory function is available for ANT-A only.
• ANT-B cannot perform channel search.
• You may need to manually add the CABLE Converter
output channel setting (fixed), when the CABLE Converter
using. (See page 25.)
SOURCE
DTV/SAT
GUIDE
SET/
ENTER
DTV/SAT
INFO
VCR REC
FAVORITE CH
A
B
C
D
INPUT
VOL
VOL
RECEIVER
Setting the favorite channels
MENU
Setup
This function allows you to program 4 favorite channels,
in 4 different categories. (A total of 16 channels.) By
setting the favorite channels in advance, you can select
your favorite channels easily.
CH Setup
Air/Cable
CH Search
CH Memory
Favorites
RETURN
PLASMA DISPLAY
[Air]
1 Press MENU.
2 Press a/b to select “Setup”, and then press SET/
ENTER.
• Secret number setting menu displays only when
“Secret No.” is set. (See page 52.)
• Setup menu displays when the “Secret No.” is not set.
Skip step 3.
MENU
Setup
CH Setup
3 Enter your 4-digit secret number with 0 – 9 to cancel
Favorites
the “Secret No.” when you set it.
A
B
C
D
4 Press a/b to select “CH Setup”, and press SET/
ENTER.
5 Press a/b to select “Favorites”, and press SET/
ENTER.
6 Press a/b to select the desired memory area(A to
D), and press SET/ENTER.
7 Press c/d to select the position in the area, and
then press a/b to select the desired channel and
press SET/ENTER to fix the channels. Repeat the
same steps to set for other area.
MENU
Setup
CH Setup
Favorites
A
B
C
D
002
8 Press MENU to exit the menu.
A
• Return to the previous menu by pressing MENU RETURN.
E-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Language setting
You can also select a language from the option menu. Select from among 3 languages: English, French and
Spanish.
1 Press MENU.
CH
MENU
CH
VOL
RETURN
MUTING
Option
Language
English
2 Press a/b to select “Option”, and then press SET/
[English]
ENTER.
• Option menu displays.
Français
Español
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
3 Press a/b to select “Language”, and then press
SET/ENTER.
SOURCE
DTV/SAT
GUIDE
• Language menu displays.
SET/
ENTER
4 Press a/b to select the desired language listed
DTV/SAT
INFO
on the screen, and then press SET/ENTER.
VCR REC
FAVORITE CH
5 Press MENU to exit the menu.
A
B
C
D
A
INPUT
VOL
VOL
• Return to the previous menu by pressing MENU RETURN.
RECEIVER
PLASMA DISPLAY
E-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Picture adjustments
Adjust the picture to your preference with the following picture settings.
1 Press MENU.
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
2 Press a/b to select “Picture”, and then press SET/
ANT
INPUT
ENTER.
FRONT
SURR
• Picture menu displays.
AV
MTS
CC
SELECTION
3 Press a/b to select a specific adjustment item.
SPLIT
SELECT
4 Press c/d to adjust the item to your desired
position.
MENU
RETURN
TV/SAT/DVD
DTV/DVD TOP
MENU
5 Press MENU to exit the menu.
A
MENU
SOURCE
DTV/SAT
GUIDE
• When all adjustments are set to factory preset values,
1 Press a/b to select “Reset”, and then press SET/
ENTER.
2 Press a/b to select “Yes”, and then press SET/
ENTER.
SET/
ENTER
DTV/SAT
INFO
VCR REC
FAVORITE CH
• Return to the previous menu by pressing MENU RETURN.
• If you select“STANDARD” with AV SELECTION on the
remote control unit, these items will display in gray
and not be selectable. See page 44.
A
B
C
D
INPUT
VOL
VOL
RECEIVER
Adjustments items for AV source
Adjustments items for PC source
Currently selected AV
SELECTION mode
Currently selected AV
SELECTION mode
MENU
MENU
Picture
Picture
USER
USER
Contrast [+30] 0
+40
+30
+30
+30
+7
Contrast [+30] 0
+60
+30
+30
+30
+30
Bright
[0] –30
[0] –30
[0] –30
[0] –7
Bright
Red
[0] –30
[0] –30
[0] –30
[0] –30
Color
Tint
Green
Blue
Sharp
Advanced
Reset
Reset
RETURN
RETURN
Selected item
Selected item
cbutton
dbutton
cbutton
dbutton
Contrast
Bright
Red
Contrast
Bright
For less contrast
For less brightness
For weaker red
For more contrast
For more brightness
For stronger red
For less contrast
For more contrast
For more brightness
For less brightness
For less color
intensity
For more color
intensity
Color
Skin tones become
purplish
Skin tones become
greenish
Green
Blue
Tint
For weaker green
For weaker blue
For stronger green
For stronger blue
Sharp
For less sharpness
For more sharpness
A
• Select “Advanced” and then press SET/ENTER to set
“Color Temp”, “Black”, “3D-Y/C”, “Black & White” or
“PureCinema” settings. See pages 28, 29 and 30.
E-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Color temperature
MENU
TV CBL VCR DVD
Adjust the color temperature to give a better white
balance.
/SAT
/DTV
/LD
TV
Picture
ANT
INPUT
USER
Advanced
Color Temp
High
FRONT
SURR
1 Press MENU.
AV
MTS
CC
SELECTION
[Mid]
2 Press a/b to select “Picture”, and then press SET/
SPLIT
FREEZE
SLEEP
SELECT
ENTER.
SCREEN
MODE
SUB
SUB CH
Mid-High
Mid
INPUT
3 Press a/b to select “Advanced”, and then press
DISPLAY
EDIT/ LEARN
Mid-Low
Low
SET/ENTER.
4 Press a/b to select “Color Temp”, and then press
1
2
5
8
3
6
9
SET/ENTER.
4
5 Press a/b to select the desired level, and then
press SET/ENTER.
7
6 Press MENU to exit the menu.
CH
ENTER
0
A
• Return to the previous menu by pressing MENU RETURN.
• If you select“STANDARD”with AV SELECTION on the
remote control unit, this item will display in gray and
not be selectable. See page 44.
CH
CH
VOL
RETURN
MUTING
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
Description
Selected item
SOURCE
DTV/SAT
GUIDE
White with Bluish tone
High
Mid-High
Mid
Mid-Low
Low
SET/
ENTER
DTV/SAT
INFO
VCR REC
FAVORITE CH
White with Reddish tone
A
B
C
D
INPUT
VOL
VOL
RECEIVER
Black
MENU
Select a level for automatically adjusting blackish tone
to suit viewing conditions.
Picture
USER
Advanced
Black
PLASMA DISPLAY
1 Press MENU.
[Low]
2 Press a/b to select “Picture”, and then press SET/
Off
ENTER.
High
Low
3 Press a/b to select “Advanced”, and then press
SET/ENTER.
4 Press a/b to select “Black”, and then press SET/
ENTER.
5 Press a/b to select the desired level, and then
press SET/ENTER.
6 Press MENU to exit the menu.
A
• Return to the previous menu by pressing MENU RETURN.
• If you select“STANDARD”with AV SELECTION on the
remote control unit, this item will display in gray and
not be selectable. See page 44.
Description
Selected item
No adjustment
Off
For high detail in black portions
For low detail in black portions
High
Low
E-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
3D-Y/C
MENU
TV CBL VCR DVD
Provides high quality images with minimal dot crawl
and cross color noise.
/SAT
/DTV
/LD
TV
Picture
ANT
INPUT
USER
Advanced
3D-Y/C
Standard
Fast
FRONT
SURR
1 Press MENU.
AV
MTS
CC
[Standard]
SELECTION
2 Press a/b to select “Picture”, and then press SET/
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
ENTER.
INPUT
Slow
3 Press a/b to select “Advanced”, and then press
DISPLAY
EDIT/ LEARN
SET/ENTER.
4 Press a/b to select “3D-Y/C”, and then press SET/
1
2
5
8
3
6
9
ENTER.
4
5 Press a/b to select the desired item, and then
press SET/ENTER.
7
6 Press MENU to exit the menu.
CH
0
ENTER
A
CH
• Return to the previous menu by pressing MENU RETURN.
• If you select“STANDARD”with AV SELECTION on the
remote control unit, this item will display in gray and
not be selectable. See page 44.
CH
VOL
RETURN
MUTING
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
Description
Selected item
SOURCE
DTV/SAT
GUIDE
Normal adjustment
Standard
Fast
Slow
For moving image
For still image
SET/
ENTER
DTV/SAT
INFO
VCR REC
FAVORITE CH
A
B
C
D
Black & White
For viewing a video in monochrome.
MENU
INPUT
VOL
VOL
RECEIVER
Picture
USER
Advanced
Black & White
Off
1 Press MENU.
2 Press a/b to select “Picture”, and then press SET/
[Off]
PLASMA DISPLAY
ENTER.
On
3 Press a/b to select “Advanced”, and then press
SET/ENTER.
4 Press a/b to select “Black & White”, and then
press SET/ENTER.
5 Press a/b to select “On”, and then press SET/
ENTER.
6 Press MENU to exit the menu.
A
• Return to the previous menu by pressing MENU RETURN.
• If you select“STANDARD”with AV SELECTION on the
remote control unit, this item will display in gray and
not be selectable. See page 44.
Description
Selected item
Normal color
For viewing in monochrome
Off
On
E-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
PureCinema
MENU
TV CBL VCR DVD
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still film frame for high-definition picture
quality.
/SAT
/DTV
/LD
TV
Picture
ANT
INPUT
USER
Advanced
PureCinema
Off
FRONT
SURR
AV
MTS
CC
[On]
SELECTION
SPLIT
FREEZE
SLEEP
SELECT
1 Press MENU.
SCREEN
MODE
SUB
SUB CH
On
INPUT
2 Press a/b to select “Picture”, and then press SET/
ENTER.
DISPLAY
EDIT/ LEARN
3 Press a/b to select “Advanced”, and then press
1
2
5
8
3
6
9
SET/ENTER.
4 Press a/b to select “PureCinema”, and then press
4
SET/ENTER.
7
5 Press a/b to select “On”, and then press SET/
CH
ENTER
ENTER.
0
6 Press MENU to exit the menu.
CH
CH
VOL
RETURN
A
• Return to the previous menu by pressing MENU RETURN.
• If you select “STANDARD” with AV SELECTION on the
remote control unit, or input sources with 1080I, 720P
or 480P component signals, this item will display in
gray and not be selectable. See page 44.
MUTING
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
SOURCE
DTV/SAT
GUIDE
Description
Selected item
SET/
ENTER
DTV/SAT
INFO
Normal viewing mode
Detects, analyzes, converts film source
Off
On
VCR REC
FAVORITE CH
A
B
C
D
INPUT
VOL
VOL
RECEIVER
PLASMA DISPLAY
E-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Sound adjustment
You can adjust the sound quality to your preference with the following settings.
1 Press MENU.
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
2 Press a/b to select “Audio”, and then press SET/
ANT
INPUT
ENTER.
FRONT
SURR
• Audio menu displays.
AV
MTS
CC
SELECTION
3 Press a/b to select a specific adjustment item.
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
4 Press c/d to adjust the item to your desired
INPUT
position.
DISPLAY
EDIT/ LEARN
5 Press MENU to exit the menu.
1
2
5
8
3
6
9
A
• When all adjustments are set to factory preset values,
1 Press a/b to select “Reset”, and then press SET/
ENTER.
4
7
2 Press a/b to select “Yes”, and then press SET/
ENTER.
• Return to the previous menu by pressing MENU RETURN.
• If you select“STANDARD”with AV SELECTION on the
remote control unit, these items will display in gray
and not be selectable. See page 44.
CH
ENTER
0
CH
CH
VOL
RETURN
MUTING
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
Selected item
Treble
cbutton
For weaker treble
For weaker bass
dbutton
For stronger treble
For stronger bass
SOURCE
DTV/SAT
GUIDE
SET/
ENTER
DTV/SAT
INFO
Bass
VCR REC
FAVORITE CH
Decrease audio from Decrease audio from
the right speaker the left speaker
A
B
C
D
Balance
INPUT
VOL
VOL
RECEIVER
PLASMA DISPLAY
Adjustment items for AV source
MENU
Audio
USER
Treble
[0] –15
[0] –15
[0] Left
+15
Bass
+15
Balance
Reset
Right
RETURN
E-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Power Control
Power Control setting allows you to reduce the display brightness to save energy.
Power Control for AV source
Energy Save
When set to “Save”, the power consumption is saved
by decreasing picture brightness.
MENU
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
Power Control
Energy Save
Standard
Save
[Standard]
ANT
INPUT
FRONT
SURR
AV
MTS
CC
SELECTION
1 Press MENU.
SPLIT
FREEZE
SLEEP
SELECT
2 Press a/b to select “Power Control”, and then
SCREEN
MODE
SUB
SUB CH
INPUT
press SET/ENTER.
3 Press a/b to select “Energy Save”, and then press
SET/ENTER.
DISPLAY
EDIT/ LEARN
1
2
5
8
3
6
9
4 Press a/b to select “Save”, and then press SET/
ENTER.
4
5 Press MENU to exit the menu.
A
• “Standard” is factory preset value.
• Return to the previous menu by pressing MENU RETURN.
7
CH
ENTER
0
CH
No Signal off
When set to “Enable”, the power will automatically shut
down if no signal inputs for 15 minutes.
MENU
CH
VOL
RETURN
Power Control
No Signal off
Disable
[Disable]
MUTING
1 Press MENU.
Enable
2 Press a/b to select “Power Control”, and then
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
press SET/ENTER.
SOURCE
DTV/SAT
GUIDE
3 Press a/b to select “No Signal off”, and then press
SET/ENTER.
SET/
ENTER
DTV/SAT
INFO
4 Press a/b to select “Enable”, and then press SET/
ENTER.
VCR REC
FAVORITE CH
5 Press MENU to exit the menu.
A
B
C
D
• Five minutes before the power shuts down, a hazard
INPUT
VOL
VOL
warning displays every minute.
RECEIVER
A
• “Disable” is factory preset value.
• Return to the previous menu by pressing MENU RETURN.
• When a TV program finishes, and the Media Receiver
should receives a signal input, but this may not occur.
PLASMA DISPLAY
No Operation off
MENU
When set to “Enable”, the power will automatically shut
down if no operation for 3 hours.
Power Control
No Operation off
Disable
[Disable]
1 Press MENU.
Enable
2 Press a/b to select “Power Control”, and then
press SET/ENTER.
3 Press a/b to select “No Operation off”, and then
press SET/ENTER.
4 Press a/b to select “Enable”, and then press SET/
ENTER.
5 Press MENU to exit the menu.
• Five minutes before the power shuts down, hazard
warning displays every minute.
A
• “Disable” is factory preset value.
• Return to the previous menu by pressing MENU RETURN.
E-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment settings
Power Control for PC source
Power control allows you to reduce display brightness
and save energy.
MENU
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
Power Control
Energy Save
Standard
Save
[Standard]
ANT
INPUT
FRONT
SURR
Energy Save
AV
MTS
CC
SELECTION
1 Press MENU.
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
2 Press a/b to select “Power Control”, and then
INPUT
press SET/ENTER.
DISPLAY
EDIT/ LEARN
3 Press a/b to select “Energy Save”, and then press
SET/ENTER.
1
2
5
8
3
6
9
4 Press a/b to select “Save”, and then press SET/
4
ENTER.
5 Press MENU to exit the menu.
7
A
CH
ENTER
0
• “Standard” is factory preset value.
• Return to the previous menu by pressing MENU RETURN.
CH
CH
VOL
RETURN
MUTING
Power Management
When set, the power will automatically shut down.
MENU
Power Control
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
Power Management
[Off]
1 Press MENU.
Off
SOURCE
DTV/SAT
GUIDE
2 Press a/b to select “Power Control”, and then
Mode1
Mode2
press SET/ENTER.
SET/
ENTER
DTV/SAT
INFO
3 Press a/b to select “Power Management”, and
then press SET/ENTER.
VCR REC
FAVORITE CH
4 Press a/b to select “Mode1” or “Mode2”, and then
A
B
C
D
press SET/ENTER.
INPUT
VOL
VOL
RECEIVER
5 Press MENU to exit the menu.
A
• Return to the previous menu by pressing MENU RETURN.
PLASMA DISPLAY
Description
Selected item
Off
• No power management
• Factory preset value.
• If no signal inputs for 8 minutes, the power
shuts down.
• Even if you start using the computer and
the signal inputs again, the System stays
off.
• The System turns on again by pressing
STANDBY/ON on the Plasma Display or
TV a on the remote control unit.
Mode1
Mode2
• If no signal inputs for 8 seconds, the power
shuts down.
• When you start using the computer and
the signal inputs again, the System turns
on.
E-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
You can connect many types of external equipment to your Plasma Display System, like a DVD player, VCR,
Digital tuner, computer, game console and camcorder. To view external source images, select the input source
from INPUT on the remote control unit or on the Plasma Display.
Digital tuner
DVD player
S-VIDEO
Y/PB/PR
AV
S-VIDEO
Y/PB/PR
RGB
AV
Media Receiver
(rear view)
COMPONENT VIDEO
Y
P
B
PR
SYSTEM
CABLE
INPUT
3
(WHITE)
RS-232C
A
B
(GRAY)
INPUT
INPUT
1
2
RGB INPUT
IN
CONTROL
OUT
OUT ANT/CABLE 75Ω
AC INLET
MONITOR OUTPUT S-VIDEO
VIDEO
R-AUDIO-L
S-VIDEO
VIDEO
R-AUDIO-L
S-VIDEO
AV
AV
S-VIDEO
AV Receiver
(Built-in Tuner Amp)
VCR
MEDIA RECEIVER PDP-R03U
Media Receiver
(front view)
STANDBY/ON
POWER
PC-AUDIO
AV
Game console/
Camcorder
Computer
S-VIDEO
ANALOG RGB
L
• To protect all equipment, always turn off the Media Receiver before connecting to a DVD player, VCR, Digital tuner,
computer, game console, camcorder or other external equipment.
A
• Please refer to the relevant operation manual (DVD player, computer, etc.) carefully before making connections.
E-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
Watching a DVD image
Connecting a DVD player
You can use the INPUT 1 terminal when connecting to a DVD player and other audiovisual equipment.
Component video cable
(commercially available)
Media Receiver (rear view)
When using component
video cable, select
“COMPONENT” for
“Input Select” in the
menu.
COMPONENT VIDEO
Y
PB
PR
SYSTEM
CABLE
INPUT 3
(WHITE)
RS-232C
A
B
(GRAY)
INPUT 1
INPUT 2
RGB INPUT
IN
CONTROL
OUT
OUT ANT/CABLE 75Ω
AC INLET
MONITOR OUTPUT S-VIDEO
VIDEO
R-AUDIO-L
S-O
VIDO
RAUDIO
AV cable
(commercially available)
S-video cable
(commercially available)
DVD player
Displaying a DVD image
MENU
Option
When connecting to the INPUT 1 terminal, select
“INPUT1” and set the correct input signal type on “Input
Select” in the menu. (See page 43.)
Input Select
INPUT1
[AUTO]
COMPONENT
AV-Y/C
The setting is stored and can be selected on the
“INPUT SOURCE” menu.
AUTO
To watch a DVD image, select “INPUT1” from “INPUT
SOURCE” menu using INPUT on the remote control
unit or on the Plasma Display. (See page 43.)
A
INPUT SOURCE
TV
TV CBL VCR DVD
• Each time INPUT is pressed, the input source toggles.
• If the DVD image does not come in clearly, you may need
to change the input signal type setting on the “Input Select”
menu.
/SAT
/DTV
/LD
TV
ANT
INPUT
INPUT1
INPUT2
INPUT3
INPUT4
PC
FRONT
SURR
AV
MTS
CC
SELECTION
• Refer to your DVD player operation manual for the signal
type.
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
INPUT
DISPLAY
EDIT/ LEARN
1
2
5
8
0
3
6
9
4
7
CH
ENTER
E-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
Watching a VCR image
Connecting a VCR
You can use the INPUT 2 terminal when connecting a VCR and other audiovisual equipment.
Media Receiver (rear view)
COMPONENT VIDEO
Y
PB
PR
SYSTEM
CABLE
INPUT 3
(WHITE)
RS-232C
A
B
(GRAY)
INPUT 1
INPUT 2
RGB INPUT
IN
OUT
CONTROL
OUT ANT/CABLE 75Ω
AC INLET
MONITOR OUTPUT S-VIDEO
VIDEO
R-AUDIO-L
S-EO
VIDEO
-AUDIO-L
AV cable
(commercially available)
S-VIDEO cable
(commercially available)
VCR
Displaying a VCR image
INPUT SOURCE
TV
TV CBL VCR DVD
When connecting to the INPUT 2 terminals, select
/SAT
/DTV
/LD
TV
“INPUT2”.
ANT
INPUT
MTS
INPUT1
INPUT2
INPUT3
INPUT4
PC
FRONT
SURR
AV
CC
You only need to select the input source on the “INPUT
SOURCE” menu.
SELECTION
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
INPUT
To watch a VCR image, select “INPUT2” from the
“INPUT SOURCE” menu using INPUT on the remote
control unit or on the Plasma Display. (See page 43.)
DISPLAY
EDIT/ LEARN
A
1
2
5
8
0
3
6
9
• Each time INPUT is pressed, the input source toggles.
• Refer to your VCR operation manual for the signal type.
4
7
CH
ENTER
E-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
Watching broadcasts via a Digital tuner
Connecting a Digital tuner
You can use the INPUT 3 terminal when connecting a Digital tuner and other audiovisual equipment.
Component video cable
(commercially available)
Media Receiver (rear view)
When using component
video cable, select
“COMPONENT” for
“Input Select” in the
menu.
COMPONENT VIDEO
Y
PB
PR
SYSTEM
CABLE
INPUT 3
(WHITE)
RS-232C
A
B
(GRAY)
INPUT 1
INPUT 2
RGB INPUT
IN
CONTROL
OUT
OUT ANT/CABLE 75Ω
AC INLET
MONITOR OUTPUT S-O
VIDO
RAUDIO
S-VIDEO
VIDEO
R-AUDIO-L
AV cable
(commercially available)
S-video cable
(commercially available)
RGB cable (commercially available)
When using RGB cable, select
"RGB" for "Input Select" in the menu.
Digital tuner
Displaying broadcasts via a Digital tuner
When connecting to the INPUT 3 terminal, select
“INPUT3” and set the correct input signal type on “Input
Select” in the menu. (See page 43.)
MENU
Option
Input Select
INPUT3
COMPONENT
AV-Y/C
RGB
[AUTO]
The setting is stored and can be selected on the
“INPUT SOURCE” menu.
AUTO
To watch a Digital tuner image, select “INPUT3” from
the “INPUT SOURCE” menu using INPUT on the
remote control unit or on the Plasma Display. (See page
43.)
INPUT SOURCE
TV
A
TV CBL VCR DVD
• Each time INPUT is pressed, the input source toggles.
• If the Digital tuner image does not come in clearly, you
may need to change the input signal type setting on the
“Input Select” menu.
/SAT
/DTV
/LD
TV
ANT
INPUT
INPUT1
INPUT2
INPUT3
INPUT4
PC
FRONT
SURR
AV
MTS
CC
SELECTION
• Refer to your Digital tuner operation manual for the signal
type.
• RGB INPUT cannot connect to a PC. (Input resolution is
compatible with 1080I and 540P.)
• Use the PC INPUT terminals on the front of the Media
Receiver when connecting a computer.(See page 39.)
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
INPUT
DISPLAY
EDIT/ LEARN
1
2
5
8
0
3
6
9
4
7
CH
ENTER
E-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
Enjoying a game console or viewing camcorder images
Connecting a game console or camcorder
A game console, camcorder and some other audiovisual equipment are conveniently connected using the
INPUT 4 terminals.
A
• The S-video terminal has priority over the video terminals.
Media Receiver (front view)
MEDIA RECEIVER PDP-R03U
STANDBY/ON
POWER
AV cable
(commercially available)
S-video cable
(commercially available)
Game console/Camcorder
Displaying an image of the game console or
camcorder
INPUT SOURCE
TV
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
When connecting to the INPUT 4 terminals, select
“INPUT4”.
ANT
INPUT
INPUT1
INPUT2
INPUT3
INPUT4
PC
FRONT
SURR
AV
MTS
CC
SELECTION
You only need to select the input source on the “INPUT
SOURCE” menu.
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
INPUT
To connect a game console or view a camcorder, select
“INPUT4” from the “INPUT SOURCE” menu using
INPUT on the remote control unit or on the Plasma
Display. (See page 43.)
DISPLAY
EDIT/ LEARN
1
2
5
8
0
3
6
9
A
4
• Each time INPUT is pressed, the input source toggles.
7
CH
ENTER
E-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
Viewing an image from a computer
Connecting a computer
Use the PC terminals to connect a computer.
A
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 65 for a list of computer signals compatible with the Plasma Display System.
Media Receiver (front view)
MEDIA RECEIVER PDP-R03U
STANDBY/ON
POWER
RGB cable
(commercially available)
Computer
ø 3.5 mm stereo minijack cable
(commercially available)
Signal names for 15-pin mini D-sub connecter
Pin No.
1
Signal name
Pin No.
6
Signal name
GND (Ground)
GND (Ground)
GND (Ground)
ם 5V Pin No.
q
Signal name
Not connected
5
4
3
2
1
R
G
B
10
9
8
7
6
2
7
w
SDA
HD
VD
15
14
13
12
11
3
8
e
4
Not connected
CSYNC
9
r
5
0
GND (Ground)
t
SCL
A
• Macintosh adaptor may be required for use for some Macintosh computers.
Displaying an image from a computer
When connecting to a computer, the correct input
signal type is automatically detected. If the computer
image does not come in clearly, you may need to set
the Auto Sync. adjustment on the “Auto Sync.” in the
menu. (See page 42.)
You only need to select the input source on the “INPUT
SOURCE” menu.
To view an image from a computer, select “PC” from
the “INPUT SOURCE” menu using INPUT on the
remote control unit or on the Plasma Display. (See page
43.)
INPUT SOURCE
TV
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
ANT
INPUT
INPUT1
INPUT2
INPUT3
INPUT4
PC
FRONT
SURR
AV
MTS
CC
SELECTION
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
INPUT
DISPLAY
EDIT/ LEARN
1
2
5
8
0
3
6
9
A
4
• Each time INPUT is pressed, the input source toggles.
• PC INPUT terminals cannot be used for audiovisual
equipment. Use the INPUT 3 (RGB) terminal on the rear
of the Media Receiver when connecting audiovisual
equipment with an RGB signal.(See page 37.)
7
CH
ENTER
E-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
Control cord connection
When connecting control cords to the Media Receiver form other remote controlled PIONEER components
bearing the t logo, remote control operations are performed through the sensor on the System side.
After connecting to a CONTROL IN jack on another component, its sensor will no longer receive signals. To
operate a component remotely, point the remote control unit of the connected component at the remote control
sensor on the System.
A
• Make sure the power is turned off when making connections.
• Please complete all component connections before making control cord connections.
CONTROL
IN
OUT
Media Receiver (rear view)
SYSTEM
CABLE
RS-232C
CONTROL
IN
(GRAY)
OUT
OUT
CONTROL
IN
CONTROL
IN
OUT
The control cables (not supplied) are mono sound
cables with mini plugs (no resistance).
E-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Image position (AV mode only)
For adjusting a picture’s horizontal and vertical
position.
CH
CH
VOL
RETURN
MUTING
1 Press MENU.
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
2 Press a/b to select “Option”, and then press SET/
ENTER.
SOURCE
DTV/SAT
GUIDE
3 Press a/b to select “Position”, and then press SET/
SET/
ENTER
ENTER.
DTV/SAT
INFO
4 Press a/b to select “H-Pos.” or “V-Pos.”.
VCR REC
FAVORITE CH
5 Press c/d to adjust the item to your desired
A
B
C
D
position.
INPUT
VOL
VOL
RECEIVER
6 Press MENU to exit the menu.
A
• For resetting all adjustment items set to the factory preset
values,
PLASMA DISPLAY
1 Press a/b to select “Reset”, and then press SET/
ENTER.
2 Press a/b to select “Yes”, and then press SET/
ENTER.
• Return to the previous menu by pressing MENU RETURN.
• Adjustments are stored separately according to input
source.
• You can easily move the image position as shown on page
22, but when the power is switched off the image will return
to the previously memorised position.
MENU
Option
Position
H-Pos.
V-Pos.
Reset
[0] –15
[0] –30
+15
+30
Selected item
H-Pos.
Description
RETURN
Centers the image by moving it to the left
or right.
Centers the image by moving it up or
down.
V-Pos.
E-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Auto Sync. adjustment (PC mode only)
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
For automatically adjusting the computer image.
SOURCE
DTV/SAT
GUIDE
1 Press MENU.
SET/
ENTER
2 Press a/b to select “Option”, and then press SET/
DTV/SAT
INFO
ENTER.
VCR REC
FAVORITE CH
3 Press a/b to select “Auto Sync.”, and then press
SET/ENTER.
A
B
C
D
INPUT
VOL
VOL
• Auto Sync. starts and “Adjusting the image.” displays.
RECEIVER
A
• Return to the previous menu by pressing MENU RETURN.
• When Auto Sync. is successful, “Auto Sync completed
successfully” displays. If not, Auto Sync. failed.
• Auto Sync. may fail even if “Auto Sync completed
successfully” displays.
PLASMA DISPLAY
• Auto Sync. may fail with a PC image composed of similar
patterns or monochrome. If not successful, change the
PC image and try again.
• Be sure to connect the computer to the Media Receiver
and switch it on before starting Auto Sync.
MENU
Option
Auto Sync.
Fine Sync.
Audio Out
RETURN
Fine Sync. adjustment (PC mode only)
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimize the image.
[Fixed]
1 Press MENU.
Auto Sync.
2 Press a/b to select “Option”, and then press SET/
ENTER.
Adjusting the image
32%
3 Press a/b to select “Fine Sync.”, and then press
SET/ENTER.
4 Press a/b to select the specific adjustment item.
5 Press c/d to adjust the item to your desired
position.
MENU
Option
6 Press MENU to exit the menu.
Fine Sync.
A
H-Pos.
V-Pos.
Clock
[0] –90
+90
+60
+90
+20
• When all adjustments are set to factory preset values,
1 Press a/b to select “Reset”, and then press SET/
ENTER.
[0] –60
[0] –90
[0] –20
2 Press a/b to select “Yes”, and then press SET/
ENTER.
• Return to the previous menu by pressing MENU RETURN.
Phase
Reset
RETURN
Description
Selected item
H-Pos.
Centers the image by moving it to the left
or right.
Centers the image by moving it up or
down.
V-Pos.
Adjusts the clock frequency.
Adjusts the clock phase.
Clock
Phase
E-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
INPUT 1 signal menu
Input signal source
Input signal setting
For setting the signal type of external equipment.
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
MENU
Option
ANT
INPUT
FRONT
SURR
Input Select
INPUT1
AV
MTS
CC
[AUTO]
1 Press MENU.
SELECTION
COMPONENT
AV-Y/C
SPLIT
FREEZE
SLEEP
SELECT
2 Press a/b to select “Option”, and then press SET/
SCREEN
MODE
SUB
SUB CH
ENTER.
INPUT
AUTO
3 Press a/b to select “Input Select”, and then press
SET/ENTER.
DISPLAY
EDIT/ LEARN
4 Press a/b to select an input source you want to
set, and then press SET/ENTER.
5 Press a/b to select a signal type, and then press
SET/ENTER.
1
2
5
8
3
6
9
4
INPUT 3 signal menu
MENU
Option
7
• If the selected signal type is incorrect, an image does
not display or no color image displays.
CH
ENTER
Input Select
0
INPUT3
COMPONENT
AV-Y/C
RGB
[AUTO]
6 Press MENU to exit the menu.
CH
CH
VOL
RETURN
A
• Return to the previous menu by pressing MENU RETURN.
• The System automatically sets input signals from
“INPUT2”, “INPUT4” and “PC”.
MUTING
AUTO
• If no image displays, try to change the signal type.
• Check the operation manual of the external equipment
for the signal type.
• Setting INPUT 1 and INPUT 3 signal selection to “AUTO”
when other equipment is connected will result in the
following connectivity priority.
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
SOURCE
DTV/SAT
GUIDE
SET/
ENTER
DTV/SAT
INFO
INPUT 1
1. COMPONENT VIDEO
2. S-VIDEO
INPUT 3
1. COMPONENT VIDEO
2. S-VIDEO
VCR REC
FAVORITE CH
A
B
C
D
INPUT
VOL
VOL
RECEIVER
3. VIDEO
3. VIDEO
4. RGB INPUT
PLASMA DISPLAY
Input selection
Can use for selecting the input source.
INPUT SOURCE
TV
1 Press INPUT on the remote control unit or on the
Plasma Display.
INPUT1
INPUT2
INPUT3
INPUT4
PC
• INPUT SOURCE menu displays.
2 Hold down INPUT on the remote control unit or on
the Plasma Display to select the input source.
• An image from the selected source automatically
displays.
• You can also select the input source by pressing a/
b.
A
• Items grayed out are not selectable.
E-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
AV SELECTION
TV CBL VCR DVD
AV SELECTION gives you five viewing options to
choose from to best match the Plasma Display System
environment, which can vary due to factors like room
brightness, type of program watched or the type of
image input from external equipment.
/SAT
/DTV
/LD
TV
ANT
INPUT
FRONT
SURR
AV
MTS
CC
SELECTION
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
1 Press AV SELECTION.
INPUT
• Present AV SELECTION mode displays.
DISPLAY
EDIT/ LEARN
2 Press AV SELECTION again before the mode
displayed on the screen disappears.
1
2
5
8
0
3
6
9
• The mode changes as shown left.
4
7
Selected item
STANDARD
Description
CH
ENTER
For a highly defined image in a normally
bright room
For a clear-cut image emphasizing high
contrast for sports viewing.
DYNAMIC
For a movie
MOVIE
GAME
Mode selection for INPUT 1 to 4 terminals
Lowers image brightness for easier viewing
Allows the user to customize settings as
desired. You can set the mode for each
input source.
USER
AV SELECTION: STANDARD
AV SELECTION: DYNAMIC
AV SELECTION: MOVIE
AV SELECTION: GAME
AV SELECTION: USER
Mode selection for the PC terminal
AV SELECTION: STANDARD
AV SELECTION: USER
E-44
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Wide Mode
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
1 Press SCREEN MODE.
SOURCE
DTV/SAT
GUIDE
ANT
INPUT
• The Wide Mode menu displays.
FRONT
SURR
AV
MTS
CC
SET/
ENTER
• The menu lists the Wide Mode options selectable for
the type of video signal currently received.
SELECTION
DTV/SAT
INFO
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
VCR REC
FAVORITE CH
2 Press SCREEN MODE or a/b while the Wide
INPUT
A
B
C
D
Mode menu is still on the screen.
DISPLAY
EDIT/ LEARN
• You can sequentially select a Wide Mode that has its
own aspect ratio.
AV mode
AV mode
Wide Mode
4:3
Selected item
4:3
Description
4:3
For 4:3 “standard” pictures. A side
bar appears on each side.
Full
Zoom
Cinema
Wide
Full
For 16:9 squeeze pictures.
Zoom
For 16:9 letterbox pictures. Bars may
appear on the top and bottom with
some programs.
Wide
Full
Cinema
Wide
For 14:9 letterbox pictures. Bars may
appear on the top and bottom on
some programs.
Cinema
Zoom
In this mode the picture is
progressively stretched toward each
side of the screen.
PC mode except for XGA signal
PC mode except for XGA signal
Wide Mode
Selected item
4:3
Description
4:3
4:3
Fills the screen without altering the
input signal aspect ratio.
Full
Dot by Dot
Full
Full 16:9 screen display.
Dot by Dot
Matches input signal with same
number of screen pixels.
Dot by Dot
Full
PC mode for XGA signal
PC mode for XGA signal
(Ex. 1024g768 input at PDP-5030HD)
Wide Mode
Full1
4:3
Selected item
Full1
Description
4:3
Full 16:9 screen display.
Optimized for 1024g768 display.
Full2
Matches input signal with same
number of screen pixels.
Optimized for 1024g768 display.
Full1
Full2
4:3
Full2
For wide signal display.
Use when displaying 1280g768
signal resolution.
A
• The PC mode above is for the PDP-5030HD. For the PDP-
4330HD the number of panel pixels is different, so signal
processing and actual viewing conditions will vary slightly.
E-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Audio out
MENU
Option
TV CBL VCR DVD
Allows you to select what controls the audio output.
/SAT
/DTV
/LD
TV
Audio Out
Fixed
[Fixed]
ANT
INPUT
1 Press MENU.
FRONT
SURR
AV
MTS
CC
2 Press a/b to select “Option”, and then press SET/
Variable
SELECTION
ENTER.
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
3 Press a/b to select “Audio Out”, and then press
INPUT
SET/ENTER.
DISPLAY
EDIT/ LEARN
4 Press a/b to select “Fixed” or “Variable”, and then
press SET/ENTER.
1
2
5
8
3
6
9
5 Press MENU to exit the menu.
4
A
7
• Return to the previous menu by pressing MENU RETURN.
CH
ENTER
0
Description
Selected item
Fixed
CH
CH
VOL
• Sound via optional speakers is adjusted
with VOL k/l on the remote control unit
or VOLUME s/r on the Plasma Display.
• Sound via the MONITOR OUTPUT terminal
is not adjustable and constantly outputs.
RETURN
MUTING
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
• Sound via the MONITOR OUTPUT terminal
is adjusted with VOL k/l on the remote
control unit or VOLUME s/r on the
Plasma Display.
SOURCE
DTV/SAT
GUIDE
Variable
• Sound via optional speakers is muted.
SET/
ENTER
DTV/SAT
INFO
VCR REC
FAVORITE CH
A
B
C
D
INPUT
VOL
VOL
RECEIVER
Sleep timer
Allows you to set a time when the TV automatically
switches to standby.
Sleep Timer: 30
PLASMA DISPLAY
1 Press SLEEP.
• Remaining time displays when sleep timer has been
set.
2 Each time you press SLEEP, the remaining time
Sleep Timer: Remain 30
switches as shown below.
• When set the time automatically starts counting down.
• If you want adjust the Sleep timer, you can press
“SLEEP” twice then change the time setting.
• Five minutes before time expires, the remaining time
displays each minute.
30
0
60
90
(minutes)
(cancel)
120
A
• Select “0” by pressing SLEEP to cancel the sleep timer.
E-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Closed caption
• Your Plasma Display System is equipped with an internal closed caption decoder. Closed caption is a system
which allows you to view conversations, narration, and sound effects in TV programs and home videos as
subtitles on your Plasma Display screen.
• Not all programs and videos offer closed caption. Please look for the “N” symbol to ensure that captions will
be shown.
• “CC1” or “CC2” displays subtitles of TV dramas and news programs while allowing a full view of the picture.
• “T1” or “T2” superimposes on the picture other information (e.g. TV guide, weather) that is independent of the
TV in progress.
Each time you press CC, the closed caption toggles
as shown below.
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
ANT
INPUT
A
FRONT
SURR
• When using Dual Screen (See page 55.) and Still Image
(See page 55.) functions, the right screen cannot display
Closed Caption data.
AV
MTS
CC
SELECTION
SPLIT
FREEZE
SELECT
SCREEN
MODE
SUB
SUB CH
INPUT
CC/TEXT: Off
CC/TEXT: CC1
CC/TEXT: CC2
CC/TEXT: T1
CC/TEXT: T2
E-47
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Parental control (setting V-CHIP level)
V-CHIP is an electronic filtering device built into your System. This tool gives parents a great degree of control
over broadcasts accessed by their children. It allows parents to select programs judged suitable for child
viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature
in your Plasma Display.
V-CHIP and Status will not be selectable from the menu if you do not first configure your secret number.(See
page 52 for Secret number setting for parental control.)
• The U.S. has two rating systems for viewing content: TV Parental Guidelines and movie ratings.
• The TV Parental Guidelines work in conjunction with the V-CHIP to help parents screen out inappropriate
television shows from their children.
• Movie ratings are used for original movies rated by the Motion Picture Association of America (MPAA) as
watched on cable TV and not edited for television. The V-CHIP can also be set to block MPAA-rated movies
Voluntary movie rating system (MPAA)
Rating
Description
G
General audiences. All ages admitted.
PG
Parental guidance suggested. Some material may not be suitable for children.
PG-13
Parents strongly cautioned. Some material may be inappropriate for children under 13.
Age
Restricted. Under 17 requires accompanying parent or adult guardian (age varies in some
jurisdictions).
R
NC-17
X
No one 17 and under admitted.
A rating that has now been superseded by NC-17.
a
MENU
Setup
Parental CTRL
V-Chip
MPAA
G
• If you select “PG-13”, this will automatically block the higher ratings “R”, “NC-17” and “X”.
A
• Voluntary movie rating system only uses an age-based rating.
[ — — — ]
PG
[ — — — ]
[ — — — ]
[ — — — ]
[ — — — ]
[ — — — ]
PG-13
R
NC-17
X
RETURN
TV Parental Guidelines
Content
FV
V
S
L
D
Rating
(Fantasy (Violence)
violence)
(Sexual
(Adult
(Sexually
situation) language) suggestive
dialog)
TV-Y (All children)
TV-Y7 (Directed to older children)
TV-G (General audience)
X
Suggested
age
TV-PG (Parental guidance suggested)
TV-14 (Parents strongly cautioned)
TV-MA (Mature audience only)
X
X
X
X
X
X
X
X
X
X
X
X: Content rating can be set.
E-48
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Voluntary movie rating system (MPAA)
1 Press MENU.
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
MENU
Setup
ANT
INPUT
2 Press a/b to select “Setup”, and then press SET/
FRONT
SURR
Secret No.
– – – –
ENTER.
AV
MTS
CC
SELECTION
• Secret number setting menu displays only when
“Secret No.” is set. (See page 52.)
• V-CHIP and Status will not be selectable from the menu
if you do not first configure your secret number.
(See page 52.)
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
INPUT
DISPLAY
EDIT/ LEARN
3 Enter your 4-digit secret number with 0 – 9 to cancel
the “Secret No.” when you set it.
1
2
5
8
3
6
9
4 Press a/b to select “Parental CTRL”, and then
press SET/ENTER.
MENU
Setup
Parental CTRL
V-Chip
MPAA
G
4
5 Press a/b to select “V-Chip”, and then press SET/
7
ENTER.
CH
ENTER
6 Press a/b to select “MPAA”, and then press SET/
ENTER.
0
[ — — — ]
[ — — — ]
[ — — — ]
[ — — — ]
[ — — — ]
[ — — — ]
CH
PG
7 Press a/b to select the desired item, and then
CH
VOL
RETURN
PG-13
R
press SET/ENTER to select “BLOCK”.
• The setting automatically enters “BLOCK” for any
ratings below your selection.
MUTING
NC-17
X
• If Status is not set to “On” the configuration settings
will not work. (See page 53.)
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
RETURN
8 Press MENU to exit the menu.
SOURCE
DTV/SAT
GUIDE
A
SET/
ENTER
• Return to the previous menu by pressing MENU RETURN.
DTV/SAT
INFO
TV Parental Guidelines (TV Guidelines)
1 Press MENU.
MENU
Setup
VCR REC
FAVORITE CH
A
B
C
D
Parental CTRL
V-Chip
2 Press a/b to select “Setup”, and then press SET/
INPUT
VOL
VOL
RECEIVER
ENTER.
TV Guidelines
TV-Y
• Secret number setting menu displays only when
“Secret No.” is set. (See page 52.)
• V-CHIP and Status will not be selectable from the menu
if you do not first configure your secret number.
(See page 52.)
[ — — — ]
[ — — — ]
[ — — — ]
[BLOCK]
[BLOCK]
[BLOCK]
TV-Y7
PLASMA DISPLAY
TV-G
TV-PG
3 Enter your 4-digit secret number with 0 – 9 to cancel
TV-14
TV-MA
the “Secret No.” when you set it.
Block Content
RETURN
4 Press a/b to select “Parental CTRL”, and then
press SET/ENTER.
5 Press a/b to select “V-Chip”, and then press SET/
ENTER.
6 Press a/b to select “TV Guidelines”, and then
press SET/ENTER.
MENU
Setup
Parental CTRL
7 Press a/b to select the desired item, and then
V-Chip
press SET/ENTER to select “BLOCK”.
• The setting automatically enters “BLOCK” for any
ratings below your selection.
TV Guidelines
[TV-PG]
Block Content
• When “Block Content” is selected, its menu displays
as shown left.
• If Status is not set to “On” the configuration settings
will not work. (See page 53.)
D
[ — — — ]
[ — — — ]
[ — — — ]
[BLOCK]
[ — — — ]
L
S
V
8 Press MENU to exit the menu.
A
• Return to the previous menu by pressing MENU RETURN.
FV
RETURN
E-49
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Canadian Rating Systems
• The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications
Commission (CRTC) policy on violence in television programming.
• While violence is the most important content element to be rated, the structure developed takes into
consideration other program content like language, nudity, sexuality and mature themes.
• When setting the V-CHIP on the Canadian system you can chose either the Canadian English ratings or the
Canadian French ratings.
Canadian English ratings
Rating
Description
Exempt: Includes news, sports, documentaries and other information programming; talk
shows, music videos, and variety programming.
E
Children: Intended for younger children under the age of 8 years. Pays careful attention to
themes that could threaten their sense of security and well-being.
C
Children over 8 years old: Contains no portrayal of violence as the preferred, acceptable,
or only way to resolve conflict; nor encourage children to imitate dangerous acts which
they may see on the screen.
C8e
General: Considered acceptable for all age groups. Appropriate viewing for the entire
family, contains very little violence, physical, verbal or emotional.
Age
G
Parental Guidance: Intended for a general audience, but may not be suitable for younger
children (under the age of 8) because it could contain controversial themes or issues.
PG
Over 14 Years: Could contain themes where violence is one of the dominant elements of
the storyline, but it must be integral to the development of plot or character. Language
usage could be profane and nudity present within the context of the theme.
14e
Adults: Intended for viewers 18 years and older and might contain depictions of violence,
which while related to the development of plot, character or themes, are intended for adult
viewing. Could contain graphic language and portrayals of sex and nudity.
18e
Canadian French ratings
Rating
Description
Exempt programming.
E
General: All ages and children, contains minimal direct violence, but may be integrated
into the plot in a humorous or unrealistic manner.
G
General but inadvisable for young children: May be viewed by a wide public audience, but
could contain scenes disturbing to children under eight who cannot distinguish between
imaginary and real situations. Recommended for viewing with parent.
8anse
Age
Over 13 years: Could contain scenes of frequent violent scenes and therefore
recommended for viewing with parent.
13anse
16anse
18anse
Over 16 years: Could contain frequent violent scenes and intense violence.
Over 18 years: Only for adult viewing. Could contain frequent violent scenes and extreme
violence.
E-50
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Canadian English ratings
MENU
TV CBL VCR DVD
/SAT
/DTV
/LD
Setup
TV
1 Press MENU.
Parental CTRL
V-Chip
ANT
INPUT
2 Press a/b to select “Setup”, and then press SET/
FRONT
SURR
AV
MTS
CC
ENTER.
Canadian English Ratings
SELECTION
• Secret number setting menu displays only when
“Secret No.” is set. (See page 52.)
• V-CHIP and Status will not be selectable from the menu
if you do not first configure your secret number.
(See page 52.)
E
[ — — — ]
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
C
[ — — — ]
[ — — — ]
[ — — — ]
[ — — — ]
[ — — — ]
[ — — — ]
INPUT
C8 +
G
DISPLAY
EDIT/ LEARN
PG
3 Enter your 4-digit secret number with 0 – 9 to cancel
14 +
18 +
RETURN
1
2
5
8
3
6
9
the “Secret No.” when you set it.
4 Press a/b to select “Parental CTRL”, and then
press SET/ENTER.
4
7
5 Press a/b to select “V-Chip”, and then press SET/
ENTER.
CH
0
ENTER
6 Press a/b to select “Canadian English Ratings”,
and then press SET/ENTER.
CH
CH
VOL
RETURN
7 Press a/b to select the desired item, and then
press SET/ENTER to select “BLOCK”.
• The setting automatically enters “BLOCK” for any
ratings below your selection.
MUTING
• If Status is not set to “On” the configuration settings
will not work. (See page 53.)
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
SOURCE
DTV/SAT
GUIDE
8 Press MENU to exit the menu.
SET/
ENTER
A
DTV/SAT
INFO
• Return to the previous menu by pressing MENU RETURN.
VCR REC
FAVORITE CH
Canadian French ratings
A
B
C
D
MENU
INPUT
VOL
VOL
Setup
Parental CTRL
V-Chip
1 Press MENU.
RECEIVER
2 Press a/b to select “Setup”, and then press SET/
ENTER.
Canadian French Ratings
• Secret number setting menu displays only when
“Secret No.” is set. (See page 52.)
• V-Chip and Status will not be selectable from the menu
if you do not first configure your secret number.
(See page 52.)
E
[ — — — ]
PLASMA DISPLAY
G
[ — — — ]
[ — — — ]
[ — — — ]
[ — — — ]
[ — — — ]
8ans+
13ans+
16ans+
18ans+
RETURN
3 Enter your 4-digit secret number with 0 – 9 to cancel
the “Secret No.” when you set it.
4 Press a/b to select “Parental CTRL”, and then
press SET/ENTER.
5 Press a/b to select “V-Chip”, and then press SET/
ENTER.
6 Press a/b to select “Canadian French Ratings”,
and then press SET/ENTER.
7 Press a/b to select the desired item, and then
press SET/ENTER to select “BLOCK”.
• The setting automatically enters “BLOCK” for any
ratings below your selection.
• If Status is not set to “On” the configuration settings
will not work. (See page 53.)
8 Press MENU to exit the menu.
A
• Return to the previous menu by pressing MENU RETURN.
E-51
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Secret number setting for parental
MENU
Setup
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
control (AV mode only)
Parental CTRL
Secret No.
Secret No.
Clear Secret No.
RETURN
ANT
INPUT
Allows you to use a secret number to protect certain
settings from being accidentally changed.
FRONT
SURR
AV
MTS
CC
SELECTION
Setting a secret number
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
1 Press MENU.
INPUT
2 Press a/b to select “Setup”, and then press SET/
DISPLAY
EDIT/ LEARN
MENU
ENTER.
Setup
3 Press a/b to select “Parental CTRL”, and then
press SET/ENTER.
1
2
5
8
3
6
9
Parental CTRL
Secret No.
4 Press a/b to select “Secret No.”, and then press
4
Secret No.
SET/ENTER.
Input Secret No.
New Secret No.
Reconfirm
– – – –
– – – –
– – – –
7
5 Repeat step 4 again.
CH
ENTER
6 Enter the 4-digit number as a secret number using
0
0 – 9.
MENU
CH
7 And enter the same 4-digit number on the
“Reconfirm” screen as in step 6 to confirm.
• “New Secret No. is registered.” displays.
8 Press MENU to exit the menu.
CH
VOL
RETURN
Setup
Parental CTRL
Secret No.
MUTING
Secret No.
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
Input Secret No.
New Secret No.
Reconfirm
– – – –
A
* * * *
• Return to the previous menu by pressing MENU RETURN.
SOURCE
DTV/SAT
GUIDE
– – –
*
SET/
ENTER
DTV/SAT
INFO
Secret number
setting menu
Changing the secret number
Allows you to change your current secret number.
VCR REC
FAVORITE CH
MENU
1 Press MENU.
A
B
C
D
Setup
2 Press a/b to select “Setup”, and then press SET/
INPUT
VOL
VOL
Secret No.
– – – –
RECEIVER
ENTER.
• Secret number setting menu displays.
3 Enter your 4-digit secret number with 0 – 9 to cancel
the “Secret No.” when you set it.
4 Press a/b to select “Parental CTRL”, and then
press SET/ENTER.
MENU
Setup
PLASMA DISPLAY
Parental CTRL
Secret No.
Secret No.
Input Secret No.
New Secret No.
Reconfirm
– – –
*
5 Press a/b to select “Secret No.”, and then press
* * * *
– – –
SET/ENTER.
*
6 Repeat step 5 again.
7 Enter the Old 4-digit number you have set using
MENU
0 – 9.
Setup
Parental CTRL
Secret No.
8 Enter the New 4-digit number you have set using
0 – 9.
9 And enter the same 4-digit number on the
“Reconfirm” screen as in step 8 to confirm.
• “New Secret No. is registered.” displays.
10 Press MENU to exit the menu.
Secret No.
Input Secret No.
New Secret No.
Reconfirm
* * * *
– – –
*
– – – –
MENU
A
Setup
• Return to the previous menu by pressing MENU RETURN.
Parental CTRL
Secret No.
Secret No.
Input Secret No.
New Secret No.
Reconfirm
* * * *
* * * *
– – –
*
E-52
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
Clearing the secret number
Secret number
setting menu
TV CBL VCR DVD
/SAT
/DTV
/LD
Allows you to clear your secret number.
1 Press MENU.
TV
ANT
INPUT
MENU
FRONT
SURR
Setup
2 Press a/b to select “Setup”, and then press SET/
AV
MTS
CC
Secret No.
– – – –
SELECTION
ENTER.
SPLIT
FREEZE
SLEEP
SELECT
• Secret number setting menu displays.
SCREEN
MODE
SUB
SUB CH
3 Enter your 4-digit secret number with 0 – 9 to cancel
INPUT
the “Secret No.” when you set it.
DISPLAY
EDIT/ LEARN
MENU
• Setup menu displays.
Setup
4 Press a/b to select “Parental CTRL”, and then
1
2
5
8
3
6
9
Parental CTRL
Secret No.
press SET/ENTER.
4
5 Press a/b to select “Secret No.”, and then press
SET/ENTER.
Secret No.
Secret No. Clear
RETURN
7
6 Press a/b to select “Secret No. Clear”, and the
CH
ENTER
press SET/ENTER.
0
7 Press a/b to select “Yes”, and the press SET/
MENU
Setup
CH
ENTER.
CH
VOL
RETURN
• Your secret number is cleared.
Parental CTRL
Secret No.
Secret No. Clear
No
8 Press MENU to exit the menu.
A
• See page 52 for re-registering with a new secret number.
after being cleared.
MUTING
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
Yes
• Return to the previous menu by pressing MENU RETURN.
• As a precautionary measure, make a note of your
secret number and keep it in a familiar place. If you
lose or forget your secret number, initialize the Plasma
Display System to return all settings except for theTV
channel settings to factory preset values. (See page
67.)
SOURCE
DTV/SAT
GUIDE
SET/
ENTER
DTV/SAT
INFO
VCR REC
FAVORITE CH
A
B
C
D
INPUT
VOL
VOL
Setting parental control status
MENU
Setup
RECEIVER
Used to enable or disable the parental control function.
1 Press MENU.
Parental CTRL
Status
[On]
2 Press a/b to select “Setup”, and then press SET/
PLASMA DISPLAY
Off
ENTER.
On
• Secret number setting menu displays only when
“Secret No.” is set. (See page 52.)
• V-CHIP and Status will not be selectable from the menu
if you do not first configure your secret number.
(See page 52.)
3 Enter your 4-digit secret number with 0 – 9 to cancel
the “Secret No.” when you set it.
4 Press a/b to select “Parental CTRL”, and then
press SET/ENTER.
5 Press a/b to select “Status”, and then press SET/
ENTER.
6 Press a/b to select “On” or “Off” , and then press
SET/ENTER.
• Select “On” to enable and “Off” to disable Parental
CTRL.
7 Press MENU to exit the menu.
A
• If the secret number is cleared the Status setting
automatically sets to “Off”. V-CHIP and Status will not
be selectable from the menu.
• Return to the previous menu by pressing MENU RETURN.
E-53
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful adjustment settings
How to temporarily release the V-CHIP
BLOCK
• The V-CHIP BLOCK is working and censors a
broadcast, “V-CHIP HAS BEEN ACTIVATED.”
displays.
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
ANT
INPUT
FRONT
SURR
AV
MTS
CC
SELECTION
SPLIT
FREEZE
SLEEP
SELECT
1 Press SET/ENTER while the V-CHIP is working and
SCREEN
MODE
SUB
SUB CH
INPUT
then the secret number. setting menu displays.
DISPLAY
EDIT/ LEARN
2 Enter your 4-digit secret number with 0 – 9 and
then press SET/ENTER. At this time V-CHIP BLOCK
temporarily releases.
1
2
5
8
3
6
9
4
Reactivating the temporarily released V-CHIP
BLOCK
• You can reactivate the temporarily released V-CHIP
BLOCK as shown below.
7
CH
ENTER
0
Method 1:
CH
Select Status setting (“On” or “Off”) from the
Parental CTRL menu to reactivate BLOCK.
CH
VOL
RETURN
MUTING
Method 2:
Select V-CHIP setting (“MPAA”, “TV Guidelines”,
“Canadian English Ratings” or “Canadian French
Ratings” ) from the Parental CTRL to reactivate
BLOCK.
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
SOURCE
DTV/SAT
GUIDE
Method 3:
SET/
ENTER
Switch off the Media Receiver power.
DTV/SAT
INFO
A
• Performing any of the three above will activate the V-CHIP
VCR REC
FAVORITE CH
BLOCK.
A
B
C
D
INPUT
VOL
VOL
RECEIVER
PLASMA DISPLAY
E-54
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful features
Multiscreen functions
Allows you to display two pictures on the screen at one time.
Dual screen
You can display two same-sized pictures except when
inputting from a PC INPUT terminal.
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
ANT
INPUT
1 Press SPLIT.
FRONT
SURR
AV
MTS
CC
• Dual screen displays and a selected input source
image displays.
SELECTION
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
2 Press SELECT to set either screen to be active.
INPUT
• “z” displays on the active screen, which has sound
DISPLAY
EDIT/ LEARN
output.
3 Press SUB CHe/f to select another channel on
the inactive screen.
4 Press SUB INPUT to select another input source
on the inactive screen.
• A selected image displays.
5 Press SPLIT to exit dual screen.
A
• This function does not work under the following input
conditions:
1PC INPUT mode,
2Two pictures from the same source (e.g. INPUT 1 and
INPUT 1),
3Images from a high frequency signal source.
• When this function is not available, “No dual screen display
available” will display.
Picture and still image
You can display two same-sized pictures when
inputting from a AV source.
1 Press FREEZE.
TV CBL VCR DVD
• A moving image displays on the left screen and a still
image displays on the right screen. The still image is
one frame captured from a moving image at the
moment you press FREEZE.
/SAT
/DTV
/LD
TV
ANT
INPUT
FRONT
SURR
AV
MTS
CC
SELECTION
2 Update the still image by pressing SET/ENTER.
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
• Each time you press SET/ENTER, the image on the
INPUT
right screen updates.
DISPLAY
EDIT/ LEARN
3 Press FREEZE to exit still image.
A
• This function does not work under the following input
conditions:
SOURCE
DTV/SAT
GUIDE
1PC INPUT mode,
SET/
2Images from a high frequency signal source.
• When this function is not available, “No still image display
available.” will display.
ENTER
DTV/SAT
INFO
VCR REC
FAVORITE CH
A
B
C
D
INPUT
VOL
VOL
RECEIVER
PLASMA DISPLAY
FREEZE
E-55
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful features
Learning remote control function
You can operate the connected AV products (AV Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD) using the
learning function for your remote control unit. This remote control unit has a function that can memorize each
remote control code.
Presetting manufacture codes
TV CBL VCR DVD
/SAT
/DTV
/LD
TV
1 Slide the Mode switch to match the device to which
ANT
INPUT
you want to preset the remote control signal.
FRONT
SURR
AV
MTS
CC
2 Press EDIT/LEARN and 1 at the same time.
SELECTION
• LED flashes continuously.
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
3 Press 0 – 9 to enter the manufacture code. (See
INPUT
page 57.)
DISPLAY
EDIT/ LEARN
• Preset mode is finished once the LED no longer lights
up.
1
2
5
8
3
6
9
A
4
• To stop the EDIT mode in the middle, press EDIT/LEARN
once more.
• If Mode switch is switched while in EDIT mode, EDIT mode
will be canceled.
• If there is no operation for over 1 minute running, exit this
mode.
7
CH
ENTER
0
• When you enter a code that is not listed, LED flashes
quickly.
• If the table on page 57 does not include your desired
manufacturer or the remote control does not work, you
can make the memory learn its signal by the learn mode.
• The initial mode is “00” (PIONEER).
CH
CH
VOL
RETURN
MUTING
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
SOURCE
DTV/SAT
GUIDE
Learning the remote control
SET/
1 Be sure to slide the Mode switch to match the
device whose remote control signal you want to be
learned.
ENTER
DTV/SAT
INFO
VCR REC
FAVORITE CH
A
B
C
D
2 Press EDIT/LEARN and 2 at the same time.
INPUT
VOL
VOL
• LED flashes continuously.
RECEIVER
3 Press a button for you want to learn.
• Refer to the assigning buttons to functions on each
page.(See page 58 to 63.)
PLASMA DISPLAY
• The LED changes from lit up to flashing state.
• When the learn mode is finished, LED lights up once
and returns to the learn mode (LED flashes
continuously).
2 to 5 cm (0.8 to 2.0 inch)
4 To exit learn mode, press EDIT/LEARN.
A
• To stop the EDIT mode in the middle, press EDIT/LEARN
once more.
• If Mode switch is switched while in EDIT mode, EDIT mode
will be canceled.
• If there is no operation for over 1 minute running, exit this
mode.
• If TV a is pressed over 2 seconds running (LED flashes
continuously, step 2 above), the learning codes of the
current Mode switch position clear, changing back to
preset manufacturer codes. In this case, the LED turns
off after 2 seconds exiting learning mode.
Remote control
(Supplied accessory)
Remote control of
AV product
E-56
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful features
Manufacture codes
CABLE/SAT/
DTV
CABLE/SAT/
DTV
VCR
PIONEER
FISHER
DVD/LD
VCR
SHARP
DVD/LD
PHILIPS (LD)
RCA (LD)
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
PIONEER1 (CABLE)
PIONEER2 (CABLE)
JERROLD1 (CABLE)
JERROLD2 (CABLE)
JERROLD3 (CABLE)
JERROLD4 (CABLE)
JERROLD5 (CABLE)
JERROLD6 (CABLE)
PIONEER (DVD)
Panasonic (DVD)
SAMSUNG (DVD)
SONY (DVD)
24
25
26
27
28
29
30
31
32
33
34
35
36
SHARP2
SHARP3
SONY (BETA)
SONY (VHS)
SONY (8 mm)
TOSHIBA
JVC
FISHER
SONY (MDP)
SONY (LD)
FISHER
GOLDSTAR
HITACHI
HITACHI2
HITACHI3
TOSHIBA (DVD)
JVC (DVD)
PIONEER (DTV)
SHARP (DTV)
JERROLD7 (CABLE) MAGNAVOX2
JVC2
JERROLD8 (CABLE)
MITSUBISHI
JVC3
JERROLD9 (CABLE) MITSUBISHI2
JERROLD10 (CABLE) MITSUBISHI3
JVC4
JVC5
S. A. 1 (CABLE)
S. A. 2 (CABLE)
S. A. 3 (CABLE)
S. A. 4 (CABLE)
ZENITH1 (CABLE)
ZENITH2 (CABLE)
ZENITH3 (CABLE)
MITSUBISHI4
MITSUBISHI5
MITSUBISHI6
Panasonic
Panasonic2
Panasonic3
RCA
ZENITH
RCA2
PIONEER (SAT)
RCA1 (SAT)
RCA2 (SAT)
SONY (SAT)
RCA3
PIONEER (LD)
KENWOOD (LD)
PANASONIC1 (LD)
PANASONIC2 (LD)
SANYO
SANYO2
SANYO3
E-57
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful features
Using the TV remote control unit to
control other device
TV CBL VCR DVD
Mode switch
/SAT
/DTV
/LD
TV
ANT
INPUT
FRONT
SURR
AV
MTS
CC
SELECTION
Receiver control buttons
SPLIT
FREEZE
SLEEP
SELECT
When a Pioneer receiver is connected to the display,
the receiver can operate using buttons 1 to 3.
When another non-Pioneer receiver is connected to
the display, the signals for 1 to 3 must first be learned
before operating. (See page 56.)
SCREEN
MODE
SUB
SUB CH
INPUT
DISPLAY
EDIT/ LEARN
1
2
5
8
3
6
9
1
2
3
RECEIVER a (STANDBY/ON)
Turns receiver power on and off.
4
RECEIVER INPUT
Selects the input source connected to the receiver.
7
RECEIVER VOL k/l
Adjusts receiver volume level. Press VOL k to increase
the volume and VOL l to decrease it.
CH
ENTER
0
CH
CH
VOL
RETURN
MUTING
A
• (RECEIVER) eMUTING
Allows remote unit to learn receiver’s mute signal. Use
this button when the mode switch is set to something
other than TV.
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
SOURCE
DTV/SAT
GUIDE
• The color-highlighted buttons on the remote control can
learn the control signal from another device’s remote
control.
SET/
ENTER
DTV/SAT
INFO
VCR REC
FAVORITE CH
A
B
C
D
INPUT
VOL
VOL
1
2
RECEIVER
3
PLASMA DISPLAY
E-58
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful features
Cable control buttons
TV CBL VCR DVD
Mode switch
/SAT
/DTV
/LD
TV
When the Mode switch is set to CBL/SAT/DTV the
cable converter connected to the display can operate
using 1 to 5.
ANT
INPUT
FRONT
SURR
AV
MTS
CC
Cable converters made by other manufacturers and
not preset can also operate using the remote control
unit if 1 to 5 have learned the functions. (See page
56.)
SELECTION
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
INPUT
DISPLAY
EDIT/ LEARN
1
0 – 9
Press a button (or buttons) that corresponds to the
channel that you want to watch.
1
2
5
8
3
6
9
2
3
4
CH k/l
4
1
Press CH k or CHl to tune in a higher or lower channel.
SOURCE a
Turns the cable converter power on and off.
7
CH
ENTER
0
4
5
CH ENTER *
Fix the selected channel with the direct channel
selection buttons.
CH
CH
VOL
RETURN
5
CH RETURN *
Press to switch between the current channel and the
channel you were watching immediately before.
2
3
MUTING
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
* Some manufacturers do not preset CH ENTER and CH
RETURN. Use these buttons to learn if necessary.
SOURCE
DTV/SAT
GUIDE
SET/
ENTER
DTV/SAT
INFO
A
VCR REC
FAVORITE CH
• CABLE, SAT and DTV cannot be selected at the same
A
B
C
D
time.
• The color-highlighted buttons on the remote control can
learn the control signal from another device’s remote
control.
INPUT
VOL
VOL
RECEIVER
PLASMA DISPLAY
E-59
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful features
SAT control buttons
TV CBL VCR DVD
Mode switch
/SAT
/DTV
/LD
TV
When the SAT is preset by the learning remote control
function, the remote control unit buttons will function
as shown below.
ANT
INPUT
FRONT
SURR
AV
MTS
CC
• When the Mode switch is set to CBL/SAT/DTV,
satellite broadcast tuners made by other
manufacturers and not preset can also operate
with the remote control unit if 1 to 7 have learned
the functions. (See page 56.)
SELECTION
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
INPUT
DISPLAY
EDIT/ LEARN
1
0 – 9
1
2
5
8
3
6
9
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
4
1
2
3
SOURCE a
Turns the Satellite broadcast tuner power on and off.
7
SET/ENTER, a/b/c/d
CH
ENTER
SET/ENTER: Press to activate the selected function.
a/b/c/d: Press the button to select items on the SAT
GUIDE screen or SAT MENU screen.
0
4
5
CH
CH
VOL
RETURN
4
CH ENTER
Fix the selected channel with the direct channel
selection buttons.
MUTING
• Use this button to learn if necessary.
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
5
6
7
SAT MENU
When this button is pressed, the satellite broadcasting
menu screen will display.
SOURCE
DTV/SAT
GUIDE
2
3
6
7
SAT GUIDE
SET/
ENTER
DTV/SAT
INFO
When this button is pressed, the satellite broadcasting
guide screen will display.
VCR REC
FAVORITE CH
SAT INFO
A
B
C
D
When this button is pressed, information on satellite
broadcasting will display.
INPUT
VOL
VOL
RECEIVER
• Use this button to learn if necessary.
A
• CABLE, SAT and DTV cannot be selected at the same
time.
PLASMA DISPLAY
• The color-highlighted buttons shown in the figure at left
can learn the control signal from another device’s remote
control.
E-60
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful features
DTV control buttons
TV CBL VCR DVD
Mode switch
/SAT
/DTV
/LD
TV
For viewing DTV broadcasts, a digital tuner
(commercially available) is necessary.
ANT
INPUT
FRONT
SURR
AV
MTS
CC
When the Mode switch is set to CBL/SAT/DTV, the
remote control unit buttons will function as shown
below.
SELECTION
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
INPUT
• Operate the tuner using 1 to 10.
1
0 – 9
DISPLAY
EDIT/ LEARN
Press a button (or buttons) that corresponds to the
channel that you want to watch.
1
2
5
8
3
6
9
2
3
4
5
• (DOT)
Used for channel selection.
4
1
CH k/l
7
Press CH k or CHl to tune in a higher or lower channel.
CH
ENTER
SOURCE a
Turns the digital tuner on and off.
0
2
3
CH
SET/ENTER, a/b/c/d
CH
VOL
RETURN
7
SET/ENTER: Press to activate the selected function.
a/b/c/d: Press the button to select items on the DTV
MENU screen.
MUTING
6
FAVORITE CH/Colored (blue/green/red/yellow)
FAVORITE CH: Used for making FAVORITE CH settings
with the digital tuner.
Blue/green/red/yellow: Used to make selections from
the digital tuner menu.
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
8
9
SOURCE
DTV/SAT
GUIDE
4
5
SET/
ENTER
DTV/SAT
INFO
7
8
9
CH RETURN
Press to switch between the current channel and the
channel you were watching immediately before.
10
VCR REC
FAVORITE CH
6
A
B
C
D
DTV MENU
INPUT
VOL
VOL
When this button is pressed, the DTV menu screen will
display.
RECEIVER
DTV GUIDE
When this button is pressed, the DTV guide screen will
display.
PLASMA DISPLAY
10 DTV INFO
When this button is pressed, information on DTV will
display.
A
• CABLE, SAT and DTV cannot be selected at the same
time.
• The color-highlighted buttons on the remote control can
learn the control signal from another device’s remote
control.
E-61
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful features
VCR control buttons
TV CBL VCR DVD
Mode switch
/SAT
/DTV
/LD
TV
When the VCR is preset by the learning remote control
function, the remote control unit button will function as
follows when the Mode switch of the remote control
unit is set to VCR.
• When the input selector button having the same
number as the input terminal connecting the VCR is
pressed, the VCR can operate using 1 to 8.
• VCR made by other manufacturers and not preset
can also operate using the remote control unit if 1 to
8 have learned the functions. (See page 56.)
ANT
INPUT
FRONT
SURR
AV
MTS
CC
SELECTION
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
INPUT
DISPLAY
EDIT/ LEARN
1
2
5
8
3
6
9
1
2
3
4
5
CH k/l
4
Press to select the channel of the TV tuner on the VCR.
SOURCE a
Turns the power of the VCR on and off.
7
CH
ENTER
F
0
Set pauses and still pictures.
CH
S
CH
VOL
RETURN
Rewinds the tape and allows picture search.
1
2
MUTING
H
Stop the tape transport.
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
6, 8 VCR REC
Press both buttons at the same time to start recording.
SOURCE
DTV/SAT
GUIDE
7
V
Rapidly advances the tape and allows picture search.
SET/
ENTER
DTV/SAT
INFO
8
I
3
4
6, 8
7
Selects playback.
VCR REC
FAVORITE CH
A
A
B
C
D
• The color-highlighted buttons on the remote control can
learn the control signal from another device’s remote
control.
INPUT
VOL
VOL
RECEIVER
5
8
PLASMA DISPLAY
E-62
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful features
DVD/LD control buttons
TV CBL VCR DVD
Mode switch
/SAT
/DTV
/LD
TV
When the DVD/LD is preset by the learning remote
control function, the remote control unit button will
function as follows when the Mode switch of the
remote control unit is set to DVD/LD.
• When the input selector button having the same
number as the input terminal connecting a DVD
player or LD player is pressed, these players can
operate using 1 to 11. (7 to 9 are for DVD players
only.)
ANT
INPUT
FRONT
SURR
AV
MTS
CC
SELECTION
SPLIT
FREEZE
SLEEP
SELECT
SCREEN
MODE
SUB
SUB CH
INPUT
DISPLAY
EDIT/ LEARN
• DVD/LD players made by other manufacturers and
not preset can also operate using the remote control
unit if 1 to 11 have learned the functions. (See page
56.)
1
2
5
8
3
6
9
4
7
1
U
Pressing quickly once takes you to the start of the next
chapter. Each time you press it, you move ahead to the
start of the next chapter.
CH
ENTER
0
CH
CH
VOL
1
2
2
T
RETURN
Pressing quickly once takes you to the start of the
chapter currently playing. Each time you press it, you
move back to the start of the previous chapter.
MUTING
7
8
3
4
5
6
SOURCE a
Turns the power of the DVD/LD player on and off.
MENU
RETURN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
SOURCE
DTV/SAT
GUIDE
F
3
Set pauses and still pictures.
SET/
ENTER
9
DTV/SAT
INFO
S
Continue pressing to go backward.
4
5
VCR REC
FAVORITE CH
H
10
A
B
C
D
Playback stops when pressing once.
With some DVD/LD players, pressing the button twice
may open the disc tray.
INPUT
VOL
VOL
RECEIVER
6
11
7
8
DVD MENU (DVD only)
When this button is pressed, the DVD menu will display.
PLASMA DISPLAY
DVD TOP MENU (DVD only)
When this button is pressed, the DVD top menu will
display.
9
SET/ENTER, a/b/c/d (DVD only)
SET/ENTER: Press to activate the selected function.
a/b/c/d: Press the button to select items on the DVD
MENU screen.
10 V
Continue pressing for fast forward.
11 I
Selects playback.
A
• DVD and LD cannot be selected at the same time.
• The color-highlighted buttons on the remote control can
learn the control signal from another device’s remote
control.
E-63
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
Problem
Possible Solution
• No power.
• Make sure the Plasma Display and the Media Receiver are connected correctly.
(See page 6.)
• Check if you pressed TV a on the remote control unit. (See page 14.)
If the indicator on the Plasma Display lights up red, press TV a.
• Is the power cord disconnected? (See page 13.)
• Has the main power been turned on? (See page 14.)
• Unit cannot be operated.
• External influences such as lightning, static electricity, may cause improper
operation. In this case, operate the unit after first turning on the power of the
Plasma Display and the Media Receiver, or unplugging the power cord and
replugging it in after 1 or 2 minutes.
• Remote control unit does not • Is the Mode switch set correctly? Slide it to the TV setting position.
operate.
• Are batteries inserted with polarity (e, f) aligned? (See page 8.)
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminated near the remote control sensor?
• Picture is cut off/with sidebar
screen.
• Is the image position correct? (See pages 22 and 41.)
• Are screen mode adjustments such as picture size made correctly? (See page
45.)
• Adjust the picture tone. (See pages 27 to 30.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the input signal setting. (See page 43.)
• Strange color, light color, dark or
color misalignment.
• Is the sleep timer set? (See page 46.)
• Power is suddenly turned off.
• Check the power control setting. (See pages 32 and 33.)
• The unit’s internal temperature has increased.
Remove any objects blocking vent or clean. (See page 5.)
• Is connection to other components correct? (See pages 34 to 39.)
• Has setup been done correctly after connection? (See page 43.)
• Is the correct input selected? (See page 43.)
• No picture.
• Is a non-compatible signal being input? (See page 65.)
• Is picture adjustment correct? (See pages 27 to 30.)
Warning Problem with Plasma Display System
Possible Solution
E01
• System cable connection
• System cables are not properly connected. Check that
all system cables are connected properly. (See page
6.)
E04
• Abnormal internal temperature
• The internal temperature of the Plasma Display is
abnormally high. Check the location the System is
installed. (See page 5.)
• Abnormal internal signaling or circuit
operation of the Plasma Display
• Turn off the power once and turn it on again. (See page
14.)
E06
Please check to see if a warning is displayed on the screen. If the problem still cannot be solved please consult the dealer
where this unit was purchased.
E-64
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Computer compatibility chart
Resolution
640
ן 400 720
ן 400 Frequency
Remarks
85 Hz
70 Hz
85 Hz
60 Hz
65 Hz
72 Hz
75 Hz
85 Hz
56 Hz
60 Hz
72 Hz
75 Hz
85 Hz
74.5 Hz
60 Hz
70 Hz
75 Hz
85 Hz
60 Hz
640
ן 480 Macintosh 13ꢀ (67 Hz)
800
ן 600 Macintosh 16ꢀ
832
ן 624 1024
ן 768 Macintosh 19ꢀ
1280
ן 768 Apple and Macintosh are registered trademarks
of Apple Computer, Inc.
Microsoft is a registered trademark of Microsoft
Corporation.
DDC is a registered trademark of Video Electronics
Standards Association.
Power Management is a registered trademark of
Sun Microsystems, Inc.
VGA and XGA are registered trademarks of
International Business Machines Co., Inc.
E-65
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Specifications
50o Plasma Display, Model: PDP-503PU
1280g768 pixels
43o Plasma Display, Model: PDP-433PU
1024 g 768 pixels
Item
Number of Pixels
Audio Amplifier
12 We12 W (1 kHz, 10 %, 8 q)
12 We12 W (1 kHz, 10 %, 8 q)
Surround System
SRS/FOCUS/SRSeFOCUS
SRS/FOCUS/SRSeFOCUS
Power Requirement
120 V AC, 60 Hz, 370 W (0.6 W Standby)
120 V AC, 60 Hz, 318 W (0.6 W Standby)
1218 (W) g 714 (H) g 98 (D) mm
1070 (W) g 630 (H) g 98 (D) mm
Dimensions
Weight
(42 1/8 (W) g 24 13/16 (H) g 3 7/8 (D) inch)
(47 31/32 (W) g 28 1/8 (H) g 3 7/8 (D) inch)
31.5 kg (69.4 lbs.)
38.9 kg (85.8 lbs.)
Power cord, Cleaning cloth, Three speed
clamps, Three bead bands, Warranty card
Power cord, Cleaning cloth, Three speed
clamps, Three bead bands, Warranty card
Accessories
Item
Media Receiver, Model: PDP-R03U
Reception System
American TV standard NTSC system
TV
Function
Circuit type
Video signal detection PLL full synchronous detection,
PLL digital synthesizer system
VHF 2–13ch, UHF 14–69ch
1–125ch
Tuner
VHF/UHF
CATV
Audio multiplex
BTSC system
Terminals
Rear
INPUT 1
INPUT 2
INPUT 3
Antenna
INPUT 4
PC
S-VIDEO in, AV in, COMPONENT in
S-VIDEO in, AV in
S-VIDEO in, AV in, COMPONENT in, RGB in
75 q UNBAL, F Type for VHF/UHF/CATV in
S-VIDEO, AV in
Front
15 Pin mini D-Sub, Audio in
Monitor Out Terminal
OSD Language
S-VIDEO out, AV out, Audio (Variable, Fixed)
English/French/Spanish
Rear
Other Features
Picture & Picture, Still image, Dual Tuner System
120 V AC, 60 Hz, 40 W (0.2 W Standby)
Power Requirement
420 (W) g 70 (H) g 330 (D) mm (16 9/16 (W) g 2 25/32 (H) g 13 (D) inch)
Dimensions
Weight
4.4 kg (9.7 lbs.)
Power cord, Remote control unit, Two AA size batteries, System cable,
Operating instruction
Accessories
• Design and specifications are subject to change without notice.
E-66
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO SET THE FACTORY PRESETTINGS
Press and hold down CLEAR on the Media Receiver while it is in standby mode. Then press STANDBY/ON
on the Plasma Display or TV a on the remote control unit to turn the Plasma Display System on.
All setting items (except TV channel) return to the factory presetting.
A
• Running the factory presetting operation also clears the secret number.
You can run the Auto Installation again by using the following steps.
1 Turn on the power of the Plasma Display and the Media Receiver.
2 Press MENU. (Make sure the menu screen displays.)
3 Press a/b to select “Setup”.
4 Press SET/ENTER.
A
• If the secret number setting screen displays, you need to enter your secret number.
• If you forget your secret number, refer to HOW TO SET THE FACTORY PRESETTINGS above.
5 Press a/b to select “Auto Installation”.
6 Press SET/ENTER.
“Auto Installation completed” displays. After that, the screen changes to the TV mode.
The secret number is
.
A
• As a precautionary measure, make a note of your secret number above, scissor it from this manual, and keep it in a
familiar place.
1
*
*
SRS and the
symbol are trademarks of SRS Labs, Inc.
SRS technology is incorporated under license from SRS Labs, Inc.
1
FOCUS and the symbol are trademarks of SRS Labs, Inc.
FOCUS technology is incorporated under license from SRS Labs, Inc.
A
• Products above are a trademark or registered trademark of corporation.
E-67
Download from Www.Somanuals.com. All Manuals Search And Download.
PIONEER CORPORATION
PIONEER ELECTRONICS [USA] INC.
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A.
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: [03] 9586-6300
San Lorenzo 1009 3er Piso Desp. 302 Col. Del Valle Mexico D.F. C.P. 03100 TEL: 5-688-52-90
Printed in Japan/Imprimé au Japon/Impreso en Japón
TINS-7552CEZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
|