DVD Recorder
DVR-231-S
DVR-231-AV
DVR-233-S
RegisterYour Product on
www.pioneerelectronics.ca (Canada)
Operating Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
READ INSTRUCTIONS — All the safety and
operating instructions should be read before the
product is operated.
RETAIN INSTRUCTIONS — The safety and
operating instructions should be retained for
future reference.
HEED WARNINGS — All warnings on the product
and in the operating instructions should be
adhered to.
FOLLOW INSTRUCTIONS — All operating and use
instructions should be followed.
CLEANING — The product should be cleaned only
with a polishing cloth or a soft dry cloth. Never
clean with furniture wax, benzine, insecticides
or other volatile liquids since they may corrode
the cabinet.
ATTACHMENTS — Do not use attachments not
recommended by the product manufacturer as
they may cause hazards.
WATER AND MOISTURE — Do not use this
product near water — for example, near a
bathtub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming
pool; and the like.
ACCESSORIES — Do not place this product on an
unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to a
child or adult, and serious damage to the
product. Use only with a cart, stand, tripod,
bracket, or table recommended by the
manufacturer, or sold with the product. Any
mounting of the product should follow the
manufacturer’s instructions, and should use a
mounting accessory recommended by the
manufacturer.
GROUNDING OR POLARIZATION
OBJECT AND LIQUID ENTRY — Never push
objects of any kind into this product through
openings as they may touch dangerous voltage
points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any
kind on the product.
SERVICING — Do not attempt to service this
product yourself as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
•
If this product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other), it will fit into the
outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
•
If this product is equipped with a three-wire
grounding type plug, a plug having a third
(grounding) pin, it will only fit into a grounding
type power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the
grounding type plug.
DAMAGE REQUIRING SERVICE — Unplug this
product from the wall outlet and refer servicing
to qualified service personnel under the
following conditions:
•
When the power-supply cord or plug is
damaged.
•
If liquid has been spilled, or objects have fallen
into the product.
POWER-CORD PROTECTION — Power-supply
cords should be routed so that they are not likely
to be walked on or pinched by items placed
upon or against them, paying particular
attention to cords at plugs, convenience
receptacles, and the point where they exit from
the product.
OUTDOOR ANTENNA GROUNDING — If an
outside antenna or cable system is connected to
the product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and built-up
static charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of
the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of
antenna-discharge unit, connection to
•
•
If the product has been exposed to rain or water.
If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to its normal operation.
If the product has been dropped or damaged in
any way.
•
•
When the product exhibits a distinct change in
performance — this indicates a need for service.
REPLACEMENT PARTS — When replacement parts
are required, be sure the service technician has
used replacement parts specified by the
manufacturer or have the same characteristics
as the original part. Unauthorized substitutions
may result in fire, electric shock, or other
hazards.
SAFETY CHECK — Upon completion of any service
or repairs to this product, ask the service
technician to perform safety checks to
determine that the product is in proper
operating condition.
WALL OR CEILING MOUNTING — The product
should not be mounted to a wall or ceiling.
HEAT — The product should be situated away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers)
that produce heat.
CART — A product and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the product
and cart combination to overturn.
grounding electrodes, and requirements for the
grounding electrode. See Figure A.
LIGHTNING — For added protection for this
product during a lightning storm, or when it is
left unattended and unused for long periods of
time, unplug it from the wall outlet and
disconnect the antenna or cable system. This
will prevent damage to the product due to
lightning and power-line surges.
POWER LINES — An outside antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power
circuits, or where it can fall into such power
lines or circuits. When installing an outside
antenna system, extreme care should be taken
to keep from touching such power lines or
circuits as contact with them might be fatal.
OVERLOADING — Do not overload wall outlets,
extension cords, or integral convenience
receptacles as this can result in a risk of fire or
electric shock.
VENTILATION — Slots and openings in the cabinet
are provided for ventilation and to ensure
reliable operation of the product and to protect
it from overheating, and these openings must
not be blocked or covered. The openings should
never be blocked by placing the product on a
bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided or the
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
manufacturer’s instructions have been adhered
to.
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
POWER SOURCES — This product should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your home,
consult your product dealer or local power
company.
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
LOCATION – The appliance should be installed in a
stable location.
GROUND CLAMPS
NONUSE PERIODS – The power cord of the
appliance should be unplugged from the outlet
when left un-used for a long period of time.
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Fig. A
NEC — NATIONAL ELECTRICAL CODE
D1-4-2-2_En
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER-CORD CAUTION
DANGER
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement. S002_En
VISIBLE AND INVISIBLE LASER RADIATION WHEN
OPEN. AVOID DIRECT EXPOSURE TO BEAM.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which
requires repair will be charged for even during the
CAUTION
– PREVENT ELECTRIC SHOCK DO
NOT USE THIS (POLARIZED) PLUG
WITH AN EXTENSION CORD.
RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE
FULLY INSERTED TO PREVENT
BLADE EXPOSURE.
warranty period.
K041_En
This product includes FontAvenue® fonts licenced by
NEC corporation. FontAvenue is a registered
trademark of NEC Corporation.
ATTENTION – POUR PREVENIR LES CHOCS
ELECTRIQUES NE PAS UTILISER
CETTE FICHE POLARISEE AVEC UN
PROLONGATEUR UNE PRISE DE
COURANT OU UNE AUTRE SORTIE
DE COURANT, SAUF SI LES LAMES
PEUVENT ETRE INSEREES A FOND
SANS EN LAISSER AUCUNE PARTIE
WARNING: Handling the cord on this product or
cords associated with accessories sold with the
product will expose you to lead, a chemical known to
the State of California and other governmental
entities to cause cancer and birth defects or other
reproductive harm.
A DECOUVVERT.
D2-4-4-1_EF
Wash hands after handling
D36-P4_En
NOTE TO CATV SYSTEM INSTALLER
THIS REMINDER IS PROVIDED TO CALL THE CATV
SYSTEM INSTALLER’S ATTENTION TO ARTICLE 820-
40 OF THE NEC THAT PROVIDES GUIDELINES FOR
PROPER GROUNDING AND, IN PARTICULAR,
SPECIFIES THAT THE CABLE GROUND SHALL BE
CONNECTED TO THE GROUNDING SYSTEM OF THE
BUILDING, AS CLOSE TO THE POINT OF CABLE
This product contains mercury. Disposal of this
material may be regulated due to environmental
considerations. For disposal or recycling information,
please contact your local authorities or the Electronics
K057_En
ENTRY AS PRACTICAL.
D1-4-2-8_En
Recording equipment and copyright: You may use
this product only to reproduce or copy materials for
which you own the copyright or have obtained
permission to copy from the copyright owner or for
which you otherwise have a legal right to reproduce
or copy. Unless you own the copyright or have
obtained permission from the copyright owner or
otherwise have a legal right to reproduce or copy,
you may be violating the law, including copyright
law, and may be subject to payment of damages and
other remedies.
K018US_En
Download from Www.Somanuals.com. All Manuals Search And Download.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will
provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often
undetectable until it is too late, this manufacturer
and the Electronic Industries Association’s
Consumer Electronics Group recommend you avoid
prolonged exposure to excessive noise. This list of
sound levels is included for your protection.
Selecting fine audio equipment such as the unit
you’ve just purchased is only the start of your
musical enjoyment. Now it’s time to consider how
you can maximize the fun and excitement your
equipment offers. This manufacturer and the
Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that
lets the sound come through loud and clear without
annoying blaring or distortion-and, most importantly,
without affecting your sensitive hearing.
Decibel
Level Example
30 Quiet library, soft whispers
40 Living room, refrigerator, bedroom away from traffic
50 Light traffic, normal conversation, quiet office
60 Air conditioner at 20 feet, sewing machine
70 Vacuum cleaner, hair dryer, noisy restaurant
80 Average city traffic, garbage disposals, alarm clock
at two feet.
Sound can be deceiving. Over time your hearing
“comfort level” adapts to higher volumes of sound.
So what sounds “normal” can actually be loud and
harmful to your hearing. Guard against this by
setting your equipment at a safe level BEFORE your
hearing adapts.
THE FOLLOWING NOISES CAN BE DANGEROUS
UNDER CONSTANT EXPOSURE
90 Subway, motorcycle, truck traffic, lawn mower
100 Garbage truck, chain saw, pneumatic drill
120 Rock band concert in front of speakers,
thunderclap
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it
comfortably and clearly, and without distortion.
140 Gunshot blast, jet plane
180 Rocket launching pad
Once you have established a comfortable sound
level:
• Set the dial and leave it there.
Information courtesy of the Deafness Research Foundation.
Taking a minute to do this now will help to prevent
hearing damage or loss in the future. After all, we
want you listening for a lifetime.
S001_En
CAUTION
The following caution label appears on your unit.
Location: inside of the unit
This product is a class 1 laser product, but this
product contains a laser diode higher than Class 1.
To ensure continued safety, do not remove any covers
or attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION
CAUTION
WHEN OPEN, AVOID EXPOSURE TO THE BEAM.
RADIATIONS LASER VISIBLES ET INVISIBLES DE CLASSE 3B
ATTENTION
QUAND OUVERT. ÉVITEZ TOUT EXPOSITION AU FAISCEAU.
KLASSE 3B SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING.
ADVARSEL
UNDGÅ UDSÆTTELSE FOR STRÅLING.
KLASS 3B SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA
VARNING
DEL ÄR ÖPPNAD. UNDVIK ATT UTSÄTTA DIG FÖR STRÅLEN.
BEI GEÖFFNETER ABDECKUNG IST SICHTBARE UND UNSICHTBARE
VORSICHT
LASERSTRAHLUNG DER KLASSE 3B IM GERÄTEINNEREN
VORHANDEN. AUGEN NICHT DEM LASERSTRAHLAUSSETZEN!
CUANDO SE ABRE HAY RADIACIÓN LÁSER DE CLASE 3B VISIBLE
PRECAUCIAÓN
E INVISIBLE. EVITE LA EXPOSICIÓN A LOS RAYOS LÁSER.
AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA
VARO!
NÄKYMÄTTÖMÄLLE LUOKAN 3B LASERSÄTEILYLLE.
ÄLÄ KATSO SÄTEESEEN.
DRW2247 - A
D3-4-2-1-8_A_En
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
01 Before you start
06 Recording
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Putting the batteries in the remote control . . . . . . . . . 8
Using the remote control . . . . . . . . . . . . . . . . . . . . . . 8
Disc / content format playback compatibility . . . . . . . 8
About DVD recording . . . . . . . . . . . . . . . . . . . . . . . . 33
Recording time and picture quality. . . . . . . . . . . . . . 33
Restrictions on video recording . . . . . . . . . . . . . . . . 34
Setting the picture quality/recording time . . . . . . . . 34
Basic recording from the TV . . . . . . . . . . . . . . . . . . . 35
Setting a timer recording . . . . . . . . . . . . . . . . . . . . . 35
Timer recording FAQ . . . . . . . . . . . . . . . . . . . . . . . . 38
Recording from an external component . . . . . . . . . . 39
Playing your recordings on other DVD players . . . . . 39
Initializing a DVD-RW disc . . . . . . . . . . . . . . . . . . . . 40
02 Connecting up
Rear panel connections . . . . . . . . . . . . . . . . . . . . . . 10
Front panel connections. . . . . . . . . . . . . . . . . . . . . . 10
Easy connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using other types of video output . . . . . . . . . . . . . . . 12
Connecting to a cable box or satellite receiver (1). . . 13
Connecting to a cable box or satellite receiver (2). . . 14
Connecting to an AV amplifier or receiver. . . . . . . . . 15
Connecting other AV sources . . . . . . . . . . . . . . . . . . 16
Plugging in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
07 Editing
Editing Titles (Title Edit) . . . . . . . . . . . . . . . . . . . . . . 41
Editing chapters (Chapter Edit). . . . . . . . . . . . . . . . . 43
08 The Initial Setup menu
Using the Initial Setup menu . . . . . . . . . . . . . . . . . . 45
Basic settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Disc settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Video settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Audio settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Recording settings . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Playback settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
03 Controls and displays
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
04 Getting started
Switching on and setting up. . . . . . . . . . . . . . . . . . . 20
Making your first recording. . . . . . . . . . . . . . . . . . . . 22
Using the built-in TV tuner . . . . . . . . . . . . . . . . . . . . 22
Basic playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Displaying disc information on-screen . . . . . . . . . . . 25
09 Additional information
Screen sizes and disc formats . . . . . . . . . . . . . . . . . 56
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Frequently asked questions . . . . . . . . . . . . . . . . . . . 59
Language code list . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Country/Area code list . . . . . . . . . . . . . . . . . . . . . . . 60
On-screen displays and recorder displays . . . . . . . . 61
Handling discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Storing discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Damaged discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Cleaning the pickup lens . . . . . . . . . . . . . . . . . . . . . 62
Condensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Hints on installation . . . . . . . . . . . . . . . . . . . . . . . . . 62
Moving the recorder . . . . . . . . . . . . . . . . . . . . . . . . . 63
Resetting the recorder . . . . . . . . . . . . . . . . . . . . . . . 63
Additional information for cable/satellite/
05 Playback
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Using the Disc Navigator to browse the contents
of a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Navigating discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Scanning discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Playing in slow motion . . . . . . . . . . . . . . . . . . . . . . . 29
Frame advance/frame reverse . . . . . . . . . . . . . . . . . 29
The Play Mode menu . . . . . . . . . . . . . . . . . . . . . . . . 30
Displaying and switching subtitles . . . . . . . . . . . . . . 31
Switching DVD soundtracks. . . . . . . . . . . . . . . . . . . 31
Switching audio channels . . . . . . . . . . . . . . . . . . . . 32
Switching camera angles . . . . . . . . . . . . . . . . . . . . . 32
STB (set-top box) users. . . . . . . . . . . . . . . . . . . . . . . 63
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
6
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
01
CBhaepfteor 1re you start
•
Play Video mode recordings on a regular DVD
Video mode
Features
player
Discs recorded using the Video mode can be played back
on regular DVD players, including computer DVD drives
compatible with DVD-Video playback
•
Progressive scan-compatible
Compared to standard interlaced video, progressive scan
effectively doubles the amount of video information fed to
your TV or monitor. (Check your TV/monitor for
compatibility with this feature.)
*2
.
*2 ‘DVD-Video format’ recording: The use of the DVD-
Video format for recording on DVD-R and DVD-RW discs
is referred to as recording in ‘Video mode’ on Pioneer’s
DVD recorders. Supporting playback of DVD-R / DVD-
RW discs is optional for manufacturers of DVD
playback equipment, and there is DVD playback
equipment that does not play DVD-R or DVD-RW discs
recorded in the DVD-Video format.
•
Cinema surround sound in your home
Connect this recorder to a Dolby Digital and/or DTS-
compatible AV amp/receiver to enjoy full surround sound
effects from Dolby Digital and DTS DVD discs.
•
Program up to 32 timer recordings
Note: ‘Finalization’ is required.
You can program the recorder to record up to 32
programs, up to a month in advance, using the
®
*1
VCR Plus+ system for easy programming if you want.
As well as single programs, you can specify daily or
weekly recordings, too.
What’s in the box
*1
VCR Plus+ and PlusCode are registered trademarks
Please confirm that the following accessories are in the
box when you open it.
of Gemstar Development Corporation.
The VCR Plus+ system is manufactured under license
from Gemstar Development Corporation.
• Remote control
• AA/R6P dry cell batteries x2
• Audio/video cable (red/white/yellow)
• RF antenna cable
•
One Touch Recording
Use One Touch Recording to start recording immediately
in 30 minute blocks. Each time you press the ì REC
button, the recording time is extended by another 30
minutes.
• Power cable
• Blank DVD-RW disc
• Quick start guide
•
Optimized recording
Optimized recording adjusts the recording quality
automatically if a timer recording will not fit onto a disc
with the settings that you made. Note that the quality of
recordings may be reduced if a longer recording time is
used.
• These operating instructions
• Warranty card
•
High quality 16-bit Linear PCM audio
When recording using the high quality setting (XP), the
audio is recorded in uncompressed 16-bit Linear PCM
format. This delivers great sounding audio to accompany
the high picture quality.
•
Find what you want to watch quickly and easily
Unlike video tape that needs to be wound to the correct
place, you can jump right to the part of a DVD disc that
you want to watch. Search for a point on a disc by title,
chapter or time.
7
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
01
Putting the batteries in the remote
control
Using the remote control
Keep in mind the following when using the remote
control:
1
Open the battery compartment cover on the
back of the remote control.
• Make sure that there are no obstacles between the
remote and the remote sensor on the unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the unit’s
remote sensor.
• Remote controllers for different devices can interfere
with each other. Avoid using remotes for other
equipment located close to this unit.
2
Insert two AA/R6P batteries into the battery
• Replace the batteries when you notice a fall off in the
operating range of the remote.
compartment following the indications (ꢀ,ꢁ) inside
the compartment.
• When the batteries run down or you change the
batteries, the remote control mode is automatically
reset. See Remote Control on page 48 to reset it.
• Use within the operating range and angle, as shown.
30
30
23ft
3
Close the cover.
Disc / content format playback
compatibility
General disc compatibility
Note
This recorder is compatible with a wide range of disc
types (media) and formats. Playable discs will generally
feature one of the following logos on the disc and/or disc
packaging. Note however that some disc types, such as
recordable CD and DVD, may be in an unplayable
format—see below for further compatibility information.
Incorrect use of batteries can result in hazards such as
leakage and bursting. Please observe the following:
• Don’t mix new and old batteries together.
• Don’t use different kinds of battery together—
although they may look similar, different batteries
may have different voltages.
DVD-Video
DVD-R
DVD-RW
• Make sure that the plus and minus ends of each
battery match the indications in the battery
compartment.
• Remove batteries from equipment that isn’t going to
be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction’s rules that apply in your country or
area.
Audio CD
Video CD
CD-R
CD-RW
•
is a trademark of DVD Format/Logo Licensing
Corporation.
• Playability of ‘DualDisc’
– The DVD-Audio content on DVD side of a DualDisc
cannot be played with this product.
8
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
01
– The DVD-Video content on DVD side of a DualDisc
may or may not be played with this product.
Frequently asked questions
• What’s the difference between DVD-R and DVD-RW?
– Since audio content on ‘non-DVD’ side of a
DualDisc is not compliant with the Compact Disc
Digital Audio specification, it may or may not be
played with this product.
The most important difference between DVD-R and
DVD-RW is that DVD-R is a record-once medium,
while DVD-RW is a re-recordable/erasable medium.
You can re-record/erase a DVD-RW disc
approximately 1,000 times.
– If you need further information about playability of
DualDisc, please see ‘Service & Support’ on the
For more information, see About DVD recording on
page 33.
• What’s VR mode?
DVD-R/RW compatibility
This recorder will play and record DVD-R/RW discs.
VR (Video Recording) mode is a special mode
designed for home DVD recording. It allows flexible
editing of recorded material compared to ‘Video
mode’. On the other hand, Video mode discs are
more compatible with other DVD players.
Compatible media:
• DVD-RW Ver. 1.1, Ver. 1.1 / 2x and Ver. 1.2 / 4x
• DVD-R Ver. 2.0, Ver. 2.0 / 4x / 8x and Ver. 2.1 / 16x
Recording formats:
• Can I play my recordable discs in a regular DVD player?
• DVD-R: DVD-Video format (Video mode)
Generally, DVD-R discs and DVD-RW discs recorded
in Video mode are playable in a regular DVD player,
but they must be ‘finalized’ first. This process fixes
the contents of the disc to make them readable to
other DVD players as DVD-Video discs.
*
• DVD-RW: Video Recording (VR) format and DVD-
Video format (Video mode)
Older models of DVD recorders and DVD writers may
reject DVD-RW Ver. 1.2 / 4x discs. If you want to share
DVD-RW discs between this recorder and an older
recorder/writer, we recommend using Ver. 1.1 discs.
DVD-RW discs recorded in VR mode are playable in
some players.
The following table shows older Pioneer DVD recorders’
limited compatibility with DVD-RW Ver. 1.2 / 4x discs.
This label indicates playback compatibility with
DVD-RW discs recorded in VR mode (Video
Recording format). However, for discs recorded with
a record-only-once encrypted program, playback can
only be achieved using a CPRM compatible device.
Model
Playable
Yes1,2,3
Yes1
Recordable
DVR-7000
No
Note that Pioneer cannot guarantee that discs
recorded using this recorder will play on other players.
DVR-810H/DVR-57H
DVR-210/DVR-310/DVR-510H
No
* ‘DVD-Video format’ recording: The use of the DVD-
Video format for recording on DVD-R and DVD-RW discs
is referred to as recording in ‘Video mode’ on Pioneer’s
DVD recorders. Supporting playback of DVD-R / DVD-
RW discs is optional for manufacturers of DVD
playback equipment, and there is DVD playback
equipment that does not play DVD-R or DVD-RW discs
recorded in the DVD-Video format.
1 Discs should be finalized in this recorder before playing. Unfinalized
VR mode and Video mode discs may not play.
2 Cannot read the CPRM information will show in the display when
you load a disc. However, this will not affect playback.
3 Copy-once protected disc titles will not play.
CD-R/RW compatibility
This recorder cannot record CD-R or CD-RW discs.
Note: ‘Finalization’ is required.
• Compatible formats: CD-Audio, Video CD
• Multi-session playback: No
This recorder supports the recording of ‘copy-once’
broadcast programs using the CPRM copy protection
system (see CPRM on page 34) on CPRM-compliant
DVD-RW discs in VR mode. CPRM recordings can only
be played on players that are specifically compatible
with CPRM.
• Unfinalized disc playback: CD-Audio only
9
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting up
02
CChoaptnern2 ecting up
Rear panel connections
1
2
3
4
VHF UHF
COMPONENT VIDEO OUT
DIGITAL
OUT
IN
Y
P
B
PR
OUT
AC IN
R
L
R
L
OUTPUT INPUT 1
AUDIO
VIDEO
S-VIDEO
AUDIO
VIDEO
S-VIDEO
5
6
7
8
9
10 11
1
AC IN
Connect to a power outlet using the supplied power cable
Front panel connections
only.
2
COMPONENT VIDEO OUT
VIDEO
OPEN/
CLOSE
STANDBY/ON
VIDEO
L(MONO) AUDIO
R
REC
A high-quality video output for connecting to a TV or
INPUT
2
monitor with a component video input.
On the left side of the front panel there is a second audio/
video input, consisting of a standard (composite) video
jack, and stereo analog audio jacks.
3
COAXIAL DIGITAL OUT
A digital audio output for connecting to an AV amp/
receiver, Dolby Digital/DTS decoder or other equipment
with a coaxial digital input.
4
VHF/UHF IN
Antenna input for connection to your TV antenna.
5
Analog audio output
Stereo analog audio output for connection to your TV or
AV receiver.
6
Composite video output
Standard video output for connection to your TV or AV
receiver.
7
S-video output
S-video video output for connection to your TV or AV
receiver.
8
Analog audio input
Stereo analog audio input available for recording.
9
Composite video input
Standard video input available for recording.
10 S-video input
S-video input available for recording.
11 VHF/UHF OUT
Antenna output that passes through the antenna input
signal to make it available for your VCR, TV, etc.
10
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting up
02
Easy connections
The setup described here is a basic configuration that allows you to record TV programs on both this recorder and your
VCR. When watching recordings from this recorder, set your TV to input 1; switch to input 2 to watch a video playing
in the VCR.
Important
• This recorder is equipped with copy protection technology. Do not connect this recorder to your TV via a VCR (or
your VCR via this recorder) using AV cables, as the picture from this recorder will not appear properly on your TV.
• Before making or changing any rear panel connections, make sure that all components are switched off and
unplugged from the wall outlet.
A/V
A/V
IN 1
IN 2
TV
VHF/UHF
IN
5
3
4
A/V
OUT
VHF/UHF
OUT
VCR
VHF/UHF
IN
2
VHF UHF
MPONEDEO O
DIGITAL
OUT
IN
OUT
AC IN
R
L
R
1
L
OUTPUT INPUT
AUDIO
VIDEO
S-VIDEO
AUDIO
VIDEO
S-VIDEO
1
Antenna/cable TV
wall outlet
1
Connect your TV antenna/cable TV outlet to the
4
Connect the AUDIO and VIDEO OUTPUT jacks to
VHF/UHF IN jack on this recorder.
a set of audio/video inputs on your TV.
Use the supplied three-pin audio/video cable. It is color-
coded to help you match them up (red/white for the right/
left audio connections and yellow for video). Make sure
you match up the left and right outputs with their
corresponding inputs for correct stereo sound.
2
Use an RF antenna cable (one is supplied) to
connect the VHF/UHF OUT jack on this recorder to
the antenna input on your VCR.
• If you are not connecting a VCR in the chain, connect
this recorder directly to your TV and skip the next
step.
5
Connect your VCR to your TV (A/V IN 2 above)
using a set of audio and video cables.
3
Use an RF antenna cable to connect the antenna
output on your VCR to the antenna input on your TV.
Note
• See the following page if you want to use S-video or
component video cables for the video connection.
11
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting up
02
Using other types of video output
This recorder has standard (composite), S-video and component video outputs. The main difference between them is
the quality of the picture. S-video delivers a better picture than composite video, while component video gives better
picture quality still. The variety of outputs also gives you the flexibility of connecting your particular equipment using
the best connection type available.
COMPONENT
INPUT
S-VIDEO
INPUT
2
1
TV
VHF UHF
MPONDEO O
DIAL
IN
Y
P
B
PR
OUT
AC IN
R
L
R
L
OUTPUT INPUT
1
AUDIO
VIDEO
S-VIDEO
AUDIO
VIDEO
S-VIDEO
1 Connecting using an S-video output
S-video carries the picture as separate color and
luminance (brightness) signals.
2 Connecting using the component video output
Component video carries the picture as two separate
color signals, plus a luminance (brightness) signal.
See also Video Out on page 49 for how to set up the
component video output for use with a progressive scan-
compatible TV.
•
Use an S-video cable (not supplied) to connect
the S-VIDEO OUTPUT to an S-video input on your TV,
monitor (or other equipment).
•
Use a component video cable (not supplied) to
connect the COMPONENT VIDEO OUT jacks to a
component video input on your TV, monitor (or
other equipment).
12
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting up
02
Connecting to a cable box or satellite receiver (1)
If you are using a cable box or satellite receiver with only a few scrambled channels, follow the setup on this page. If
many or all the channels are scrambled, we recommend using the setup on the following page.
Using the setup on this page you can:
• Record unscrambled channels by selecting them on this recorder.
• Record scrambled channels by selecting them on the cable box/satellite tuner.
• Watch one channel while recording another.
Important
• Do not connect this recorder ‘through’ your VCR, satellite receiver or cable box. Always connect each component
directly to your TV or AV amp/receiver.
A/V
IN 1
TV
VHF/UHF
IN
1
2
VHF/UHF
OUT
VHF/UHF
IN
Cable box/
Satellite receiver
A/V
OUT
1
3
VHF UHF
PONEO
DIGITAL
OUT
IN
OUT
AC IN
R
L
R
L
OUTPUT INPUT
1
AUDIO
VIDEO
S-VIDEO
AUDIO
VIDEO
S-VIDEO
1
Antenna/cable TV
wall outlet
1
Connect RF antenna cables as shown.
Note
This enables you to watch and record TV channels.
The diagram shows standard video connections, but
you can alternatively use the S-video or component
video connections if they’re available.
2
Connect the AUDIO and VIDEO OUTPUT jacks on
this recorder to a set of audio/video inputs on your
TV using a set of A/V cables (as supplied).
This enables you to watch the output from this recorder.
3
Connect the audio/video output of your cable
box/satellite tuner to the INPUT 1 jacks on this
recorder using a set of A/V cables.
This enables you to record scrambled TV channels.
13
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting up
02
Connecting to a cable box or satellite receiver (2)
If many or all the channels you receive by cable or satellite are scrambled, we recommend using this setup.
Using the setup on this page you can:
• Record any channel by selecting it on the cable box/satellite tuner.
Important
• Do not connect this recorder ‘through’ your VCR, satellite receiver or cable box. Always connect each component
directly to your TV or AV amp/receiver.
VHF/UHF
IN
A/V
TV
IN 1
1
2
VHF UHF
PONEDEO O
DIGITAL
OUT
IN
OUT
AC IN
R
L
R
L
OUTPUT INPUT
1
AUDIO
VIDEO
S-VIDEO
AUDIO
VIDE
S-VIDEO
3
1
A/V
OUT
VHF/UHF
OUT
Cable box/
Satellite receiver
VHF/UHF
IN
1
Antenna/cable TV
wall outlet
1
Connect the RF antenna cables as shown.
Note
This enables you to watch and record TV channels.
• The setup on this page does not allow you to watch
one channel and record another.
2
Connect the AUDIO and VIDEO OUTPUT jacks on
this recorder to a set of audio/video inputs on your
TV using a set of A/V cables (as supplied).
This enables you to watch discs.
• The diagram shows standard video connections, but
you can alternatively use the S-video or component
video connections if they’re available.
3
Connect the audio/video output of your cable
box/satellite tuner to the INPUT 1 jacks on this
recorder using a set of A/V cables.
This enables you to record scrambled TV channels.
14
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting up
02
Connecting to an AV amplifier or receiver
To enjoy multichannel surround sound you need to connect this recorder to an AV amp/receiver using the digital
coaxial output. In addition to the digital connection, we recommend also connecting using the stereo analog
connection.
You’ll probably also want to connect a video output to your AV amp/receiver. Use the standard (composite) video
output (as shown here), or the S-video or component video connections.
See also Audio Out on page 51 for how to set up the digital audio output. (Noise may be output from your speakers if
the recorder is not set up to work with your AV amp/receiver.)
Important
• Do not connect this recorder to your TV ‘through’ your VCR or other component using A/V cables. Always connect
it directly to your TV.
VHF/UHF
IN
VIDEO
IN
TV
4
VIDEO
OUT
DIGITAL IN
COAXIAL
1
AV amp/
receiver
A/V
IN 1
3
2
VHF UHF
PONEEO O
DL
IN
OUT
AC IN
R
L
R
L
OUTPUT INPUT
1
AUDIO
VIDEO
S-VIDEO
AUDIO
VIDEO
S-VIDEO
1
Antenna/cable TV
wall outlet
1
Connect RF antenna cables as shown.
4
Connect the AV amp/receiver’s video output to a
This enables you to watch and record TV channels.
video input on your TV.
2
Connect the AUDIO and VIDEO OUTPUT jacks on
this recorder to a set of audio/video inputs on your
AV amp/receiver.
Note
• The diagram shows standard video connections, but
you can alternatively use the S-video or component
video connections if they’re available.
3
Use a coaxial digital audio cable (not supplied) to
connect the COAXIAL DIGITAL OUT jack on this
recorder to a coaxial digital input on your AV amp/
receiver.
This enables you to listen to multichannel surround
sound.
• If your AV amp/receiver doesn’t have a coaxial digital
input, but has an optical type, converter boxes that
convert from coaxial to optical are available at
specialist audio dealers.
15
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting up
02
Connecting other AV sources
Connecting a VCR or analog camcorder
OPEN/
CLOSE
STANDBY/ON
VIDEO
L(MONO) AUDIO
R
REC
INPUT
2
AUDIO/VIDEO
INPUT
AUDIO/VIDEO
OUTPUT
1
2
Analog camcorder
AUDIO/VIDEO
OUTPUT
AUDIO/VIDEO
INPUT
VCR
1
Connect a set of audio and video outputs of your
VCR or camcorder to a set of inputs on this recorder.
This enables you to record tapes from your VCR or
camcorder.
• You can use standard video or S-video cables for the
video connection.
• The front panel connections make convenient
connections for a camcorder input (standard video
connection only).
2
Connect a set of audio and video inputs of your
VCR or camcorder to the outputs on the rear panel of
this recorder.
This enables you to record from this recorder to your VCR
or camcorder.
• You can use standard video or S-video cables for the
video connection.
Plugging in
After checking all the connections, plug in the recorder.
AC IN
1
Use the supplied power cable to connect this
recorder to a power outlet.
16
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
03
CChaoptnert3rols and displays
Front panel
OPEN/
CLOSE
STANDBY/ON
VIDEO
L(MONO) AUDIO
R
REC
INPUT
2
1
2
3
4
5 6 7
8
9
10
1
ꢂ STANDBY/ON
6
ꢃ
Press to switch the recorder on/into standby.
Press to stop playback or recording.
2
Front panel inputs (page 10)
7
ꢄ
Audio/video inputs, convenient for connecting a video
Press to start or restart playback (press while playing to
camera.
pause playback).
3
Front panel display
8
+/– (page 22, 24)
See below for details.
Use to change TV channels, skip chapters/tracks, etc.
4
5
IR remote sensor (page 8)
9
OPEN/CLOSE ꢅ
Press to open/close the disc tray.
ì REC
Press to start recording.
10 Disc tray
Display
4
OVER (page 51)
1
2
3
4
5
6
7
Lights when the analog audio input level is too high.
5
V
Lights when an unfinalized Video mode disc is loaded.
6
(page 35)
Lights when a timer recording has been set. (Indicator
blinks if the timer has been set but there isn’t a
recordable disc loaded.)
12 11 10
PL
9
8
1
2
7
(page 51)
Lights when a PlayList is playing (only applicable to
some VR mode discs recorded on other recorders).
Indicates which channels are recorded when Dual Mono
is selected.
(page 49)
8
SAP (page 23)
Lights when the component video output is set to
progressive scan.
Lights when the currently selected TV channel has a
Second Audio Program channel.
ꢄ
9
Character display
Lights during playback; blinks when paused.
Shows disc time information, channel number,
messages, and so on.
3
ì
Lights during recording; blinks when recording is
paused.
10 R / RW
Indicates the type of recordable DVD loaded: DVD-R or
DVD-RW.
17
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
03
11 2 3 (page 48)
Shows the remote control mode (if nothing is displayed,
the remote control mode is 1).
4
VCR Plus+
Press, then use the number buttons to enter a
PlusCode programming number for a timer recording.
®
12 PM
5
Number buttons, CLEAR
Lights to indicate PM (after midday) for the clock display.
Use the number buttons for track/chapter/title selection;
channel selection, and so on.
Use CLEAR to clear an entry and start again.
Remote control
6
DISC NAVIGATOR, TOP MENU
Press to display the Disc Navigator, or the ‘top menu’
when a DVD-Video disc is loaded.
7
MENU (page 24)
STANDBY/ON
DISPLAY
ANGLE
Press to display the menu of a DVD-Video disc.
ꢂ
2
4
1
3
AUDIO
SUBTITLE
8
ꢀ/ꢁ/ꢂ/ꢃ (cursor buttons), CH +/–, ENTER
Used to navigate all on-screen displays. Press ENTER to
select the currently highlighted option. The ꢃ (cursor
right) button is also used to change the recording input.
VCR
Plus+
1
4
7
2
3
6
9
CLEAR
5
8
5
Use the CH +/– buttons to change the channel of the
built-in TV tuner.
0
DISC NAVIGATOR
MENU
9
HOME MENU
6
8
9
7
CH+
ENTER
CH–
Press to display the Home Menu, from which you can
navigate all the functions of the recorder.
TOP
MENU
INPUT
HOME
MENU
10 RETURN
RETURN
Press to go back one level in the on-screen menu or
display.
10
ꢌ/ꢋ
ꢆ
ꢎ/ꢍ
ꢇ
ꢄ
11 Playback and recording controls (page 23)
11
12
ꢉ
ꢈ
ꢃ
ꢊ
ꢆ / ꢇ (page 28)
Press to start reverse or forward scanning. Press
again to change the speed.
ìREC REC MODE TIMER REC CM SKIP
ꢄ
Press to start playback.
ꢈ
DVD RECORDER
Press to pause playback or recording.
ꢃ
1
ꢂ STANDBY/ON
Press to stop playback or recording.
Press to switch the recorder on/into standby.
ꢉ / ꢊ
Press to skip to the previous or next title/chapter/
track; or to display the previous or next menu page.
2
DISPLAY
Displays/changes the on-screen information displays.
3
DVD playback functions
AUDIO (page 23, 31, 32)
Changes the audio language or channel. (When the
recorder is stopped, press to change the tuner
audio.)
ꢋꢌ / ꢍꢎ (page 29)
While paused, press to show the previous or next
video frame; press and hold to start slow-motion
playback.
12 ì REC (page 22)
Press to start recording. Press repeatedly to set the
recording time in blocks of 30 mins.
SUBTITLE
(page 31)
Displays/changes the subtitles included in
multilingual DVD-Video discs.
REC MODE
Press repeatedly to change the recording mode
(picture quality).
ANGLE
(page 32)
Switches camera angles on discs with multi-angle
scenes.
18
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
03
TIMER REC
Press to set a timer recording from the standard
Timer Recording screen.
CM SKIP
Press repeatedly to skip progressively forward
through the audio or video playing.
19
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
04
Chapter 4
Getting started
3
Use the ꢂ/ꢃ (cursor left/right) buttons to select
English, French or Spanish as the on-screen display
(OSD) language, then press ENTER.
Switching on and setting up
When you switch the recorder on for the first time, you
can make several basic settings using the Setup
Navigator. This takes you through setting the clock and
the internal TV tuner settings.
OSD Language
OSD Language
English
If you’re using the recorder for the first time, we strongly
recommend you use the Setup Navigator before starting
to use the recorder.
4
Press ENTER again to start setting up using the
Setup Navigator.
STANDBY/ON
ꢂ
Setup Navigator
Complete this setup before you start using your recorder.
Start
Cancel
Please use the Initial Setup if you want to make more
detailed settings.
• If you don’t want to use the Setup Navigator, press ꢁ
(cursor down) to select Cancel, then press ENTER to
exit the Setup Navigator.
ENTER
5
Use the ꢀ/ꢁ (cursor up/down) buttons to select
‘Antenna’ or ‘Cable’ depending on how you receive
your terrestrial TV channels, then press ENTER.
You can also select Do not set if you don’t need the
recorder to retune all the channels (if you’re using the
Setup Navigator for a second time, for example).
Tuner
Antenna
Cable
Do not set
DVD RECORDER
After selecting Antenna or Cable the recorder starts
automatic tuning. This takes a couple of minutes to
complete.
1
Switch on your TV and set the video input to this
recorder.
2
Press the ꢂ STANDBY/ON button on the remote
control or the front panel to switch on.
When you switch on for the first time, your TV should
display the Setup Navigator screen. (If the Setup
Navigator doesn’t appear, you can also access it from the
Initial Setup menu; see page 45).
Tuning
Please wait a moment.
20/68
Cancel
20
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
04
6
Use the ꢀ/ꢁ (cursor up/down) buttons to select
Press ꢁ (cursor down) then use the ꢂ/ꢃ (cursor
left/right) buttons to set D.S.T. to On or Off, then
press ENTER.
Select On if you are currently using daylight saving
time.
‘Auto’ or ‘Manual’ clock setting, then press ENTER.
Clock
Auto
Date
Manual
Time
Set the current date and time.
Clock Set CH
Manual
Auto
Date
01
12
/
:
01 / 2005 SAT
00 AM
Manual
Time
Time Zone
USA
•
Auto clock setting
Alaska
Some TV channels broadcast time signals together
with the program. This recorder can use these
signals to set the clock automatically.
D.S.T.
Off
Use the ꢂ/ꢃ (cursor left/right) buttons to set
‘Clock Set CH‘ to the channel preset number that
broadcasts a time signal, then move the cursor
down to ‘Start’ and press ENTER.
• Use the ꢀ/ꢁ (cursor up/down) buttons to change
the value in the highlighted field.
• Use the ꢂ/ꢃ (cursor left/right) buttons to move
from one field to another.
• Press ENTER to finish setting the time.
Auto
Auto
Date
- -
- -
/
:
- -
/
- - - -
7
That’s it! Press ENTER to finish setting up.
Manual
Time
- - AM
0 0 2
Clock Set CH
Setup Navigator
Start
Setup is complete!
Enjoy using your DVD recorder!
Finish Setup
The recorder takes a short while to set the time. After
you see that the time has been set, select Next to
proceed.
Auto
Other settings you can make
Auto
Date
01
12
/
:
01
/
2005 SAT
After setting up using the Setup Navigator, you should be
ready to start enjoying your DVD recorder. It’s possible,
however, that you may want to make a couple of
additional settings, depending on how the recorder is set
up for TV broadcasts.
Manual
Time
00 AM
Clock Set CH
0 0 2
Start
Next
• Manual channel setting – This setting lets you skip
channels where there is no station, as well as
manually tune to stations. See Manual CH Setup on
page 47.
If the time could not be set automatically, press
RETURN to go back to the previous screen and select
Manual.
• VCR Plus+ channel setting – This setting lets you
assign guide channels to ensure that the VCR Plus+
programming system works correctly. See Guide CH
Setup on page 47.
•
Manual clock setting
If no stations in your area are broadcasting time
signals, you can set the clock manually.
Use the ꢂ/ꢃ (cursor left/right) buttons to set
your time zone.
Manual
Auto
Date
01
12
/
:
01
00 AM
USA
Alaska
Off
/
2005 SAT
Manual
Time
Time Zone
D.S.T.
21
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
04
• Antenna channels are numbered 2 through 69. Cable
channels are numbered 1 through 125.
Making your first recording
This quick guide shows you how to make a basic
recording of a TV program to a recordable DVD.
5
Press ì REC to start recording.
• By default, the recording will be in SP (standard play)
mode, which will give you around two hours of
recording from a blank DVD disc. The different
recording mode and their recommended uses are
covered in mode detail in Chapter 6.
Recording is covered in much more detail in chapter 6
(Recording).
• You can pause recording by pressing ꢈ.
STANDBY/ON
Press ì REC or ꢈ again to restart recording.
ꢂ
6
When you want to stop recording, press ꢃ.
Playing back your recording
The TV program you just recorded should be on the DVD
disc as a single title with one or more chapters.
•
Press ꢄ to start playback.
If you want to stop playback before the end of the
CH+
recording, press ꢃ.
CH–
Using the built-in TV tuner
ꢄ
Changing TV channels
ꢈ
ꢃ
There are three different ways to select TV channels. Note
that you can’t change the TV channel during playback,
recording or during recording standby.
ìREC
1
4
7
2
5
8
3
6
9
DVD RECORDER
0
1
If they aren’t already on, switch on your TV and
this recorder.
Press ꢂ STANDBY/ON to switch on.
CH+
ENTER
CH–
• Make sure that the video input on your TV is set to this
recorder.
2
Press ꢅ OPEN/CLOSE (front panel only) to open
the disc tray.
• CH +/– buttons on the remote
3
Load a blank DVD-R or DVD-RW disc with the
label side face-up, using the disc tray guide to align
the disc.
• When you load a new, blank DVD-RW disc, the
recorder will take a moment to initialize it for
recording.
• Number buttons on the remote – For example, to
select channel 4, press 4 then ENTER; for channel 34,
press 3, 4, ENTER; for channel 102, press 1, 0, 2,
ENTER. (If you don’t press ENTER, the channel
changes after a few seconds.)
• +/– buttons on the front panel
4
Use the CH +/– buttons to select the TV channel
you want to record from.
• You can also use the +/– buttons on the front panel if
the recorder is stopped.
22
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
04
Note
• Antenna channels are numbered 2 through 69. Cable
channels are numbered 1 through 125.
STANDBY/ON
ꢂ
Changing audio channels
Some TV programs are broadcast with both a main and a
Second Audio Program (SAP). You can change the TV
audio using the AUDIO button.
AUDIO
CH+
ENTER
CH–
•
Press AUDIO to change the TV audio.
The current audio channel is displayed on-screen.
ꢄ
ꢃ
Mono
SAP
Stereo
• If SAP is selected, but there is no SAP channel being
broadcast, you will still hear the main audio channel.
1
Press ꢂ STANDBY/ON to switch on.
• If the sound is poor quality when set to Stereo, you
can often improve it by changing to Mono.
Also turn on your TV and make sure that it is set to the
correct video input.
2
Press ꢅ OPEN/CLOSE (front panel only) to open
the disc tray.
Basic playback
3
Load a disc.
This section shows you how to use your recorder for
playback of discs (DVD, CD, etc.). More playback
features, such as repeat play, are covered in the next
chapter.
Load a disc with the label side facing up, using the disc
tray guide to align the disc (if you’re loading a double-
sided DVD-Video disc, load it with the side you want to
play face down).
• If you want to play a DTS audio CD, please first read
the note on page 24.
Important
• Throughout this manual, the term ‘DVD’ means
playback-only DVD-Video discs and DVD-R/RW. If a
function is specific to a particular kind of DVD disc, it
is specified.
• Please see Disc / content format playback
compatibility on page 8 if you want to play a Dual Disc
(DVD/CD hybrid disc).
4
Press ꢄ to start playback.
• Some DVD-Video discs don’t allow certain playback
controls to operate at certain points in the disc. This
is not a malfunction.
• If you’re playing a DVD-Video or Video CD, a disc
menu may appear when you start playback. Use the
ꢀ/ꢁ/ꢂ/ꢃ (cursor) buttons and ENTER to navigate
DVD disc menus, and the number buttons and
ENTER for Video CD menus.
• VR mode discs recorded on another DVD recorder
may contain a PlayList of titles. These can be found
after the Original titles on the disc. See also Using the
Disc Navigator to browse the contents of a disc on
page 27.
• See the following sections for more details on playing
specific kinds of discs.
5
6
To stop playback, press ꢃ.
When you’ve finished using the recorder, eject
the disc and switch the recorder back into standby.
• To open/close the disc tray, press ꢅ OPEN/CLOSE.
Remove the disc before putting the recorder into
standby.
23
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
04
• Press ꢂ STANDBY/ON to switch the recorder into
standby.
Playing audio CDs
The table below shows the basic playback controls for
audio CDs.
Playing DVD discs
The table below shows the basic playback controls for
DVD-Video, and recordable DVD discs.
Press to start playback.
Press to pause playback; press again to
restart playback.
Press to start or restart playback.
If RESUME is displayed on-screen, play-
back starts from the place last stopped.
Press to stop playback.
Press to pause playback; press again to
restart playback.
ꢌ/ꢋ ꢎ/ꢍ
Press to start scanning. Press again to
ꢆ
ꢇ
increase the scanning speed. (There are
two scan speeds; the current scan speed
is shown on-screen.)
Press to stop playback.
You can resume playback from the same
point by pressing ꢄ. (Press ꢃ again to
cancel the resume function.)
Press to skip to previous/next track. (You
can also use the front panel +/– buttons to
do this during playback.)
ꢌ/ꢋ ꢎ/ꢍ
• During playback, press to start scan-
ꢆ
ꢇ
ning. Press repeatedly to increase the
scanning speed.
During playback, enter a track number
then press ENTER to skip directly to that
track.
Press CLEAR to clear a number entry and
start again.
1
4
7
2
3
6
9
• Press and hold while paused to start
slow-motion playback. Press repeatedly to
change the playback speed.
5
8
0
• While paused, press to advance a single
ENTER
frame in either direction.
Press to skip to previous/next chapter/title.
(You can also use the front panel +/– but-
tons to do this during playback.)
Note
• If you want to play a DTS audio CD, make sure the
recorder is connected to a DTS-compatible amp/
receiver with a digital connection. Noise will be
output through the analog outputs. Also make sure
that STEREO is selected using the AUDIO button
(see Switching audio channels on page 32).
(Commercial skip). Each press skips for-
ward progressively up to a maximum of
ten minutes.
CM SKIP
• Except VR mode: during playback, enter a
chapter number then press ENTER to skip
directly to that chapter within the currently
playing title.
On some discs, you can also use the num-
ber buttons to select numbered items in
the disc menu.
• VR mode only: during playback, enter a
title number then press ENTER.
• All: Press CLEAR to clear a number
entry and start again.
1
4
7
2
3
6
9
5
8
Playing Video CDs
The table below shows the basic playback controls for
Video CDs.
0
ENTER
Some discs feature Playback Control (PBC for short)
menus. These discs show PBC in the display when you
load them and display a menu on-screen from where you
can select what to watch.
Press to start or restart playback.
Press to display the ‘top’ menu or menu of
a DVD-Video disc (these are often the
same).
If RESUME is displayed on-screen, play-
back starts from the place last stopped.
TOP MENU
MENU
Press to pause playback; press again to
restart playback.
Use the cursor buttons to navigate DVD-
Video disc menus; press ENTER to select
items.
ENTER
Press to stop playback.
You can resume playback from the same
point by pressing ꢄ. (Press ꢃ again to
cancel the resume function.)
RETURN
Press to return to the previous level of a
DVD-Video disc menu.
24
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
04
2
To hide the information display, press DISPLAY
ꢌ/ꢋ ꢎ/ꢍ
• During playback, press to start scan-
ning. Press repeatedly to increase the
scanning speed.
• Press and hold while paused to start
slow-motion playback. Press repeatedly to
change the playback speed (forward direc-
tion only).
repeatedly until it disappears.
The example displays below are a guide only; actual
displays vary according to the disc loaded, etc.
ꢆ
ꢇ
Stop display 1
1
2
3
4
5
• While paused, press to advance a single
frame (forward direction only).
Stop
008ch
DVD-RW VR
Original
11/22/2004 MON 10:10PM
Stereo
Press to skip to previous/next track. (You
can also use the front panel +/– buttons to
do this during playback.)
When a PBC menu is displayed, press to
display the previous/next page.
1
Original or PlayList
VR mode DVD-RW discs edited on other DVD recorders
may contain Original and PlayList content. (See also the
note on page 26 about PlayLists.)
(Commercial skip) Each press skips for-
ward progressively up to a maximum of
ten minutes.
CM SKIP
2
Disc type and mode
Shows the disc type (DVD-VIDEO, DVD-R, DVD-RW, CD,
No Disk etc.), and the disc mode for recordable DVD, if
applicable (VR or Video). Note that finalized DVD-R/RW
Video mode discs are shown as DVD-VIDEO.
During playback, enter a track number
then press ENTER to skip directly to that
track.
1
4
7
2
3
6
9
5
8
0
Press CLEAR to clear a number entry and
start again.
While a PBC menu screen is displayed,
use to select numbered menu items.
Shows PBC, if Video CD playback control is on.
ENTER
3
Current date and time
4
Station call letters or TV channel
Shows the station call letters or TV channel preset for the
built-in TV tuner.
RETURN
Press to display the disc menu of a Video
CD playing in PBC mode.
5
Audio mode
Shows the broadcast audio mode for the current channel
Note
preset (Mono, Stereo, etc.).
• When playing in PBC mode, some playback features,
such as search and repeat play are not available.
Stop display 2
1
2
3
Stop
DVD-RW VR
Original
008ch
Stereo
Copy Once
Displaying disc information on-
screen
Resume
Remain
00h35m (SP)
, Play List 15
You can display various on-screen information about the
disc loaded.
Titles
Lock Disc
: Original 99
: On
4
5
1
Resume
DISPLAY
Shows Resume if playback can be resumed from the last
place stopped.
2
Recording mode and Recording time available
Shows the current recording mode (XP, SP, LP, etc.), and
1
Press DISPLAY repeatedly to display/change the
the total recording time available on the disc.
on-screen information.
Finalized Video mode DVD-R/RW discs are shown as
DVD-R Finalized or DVD-RW Finalized.
• The on-screen display automatically disappears after
20 minutes.
3
Copy control information
Shows recording restrictions.
25
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
04
4
5
Lock Disc On or Off
Recording display
Number of titles/tracks on disc
1
Play display 1
Rec
DVD-RW VR
One-Touch Rec 00h19m
003ch
Stereo
Copy Once
05 - 001
Remain
00:03:30
00h20m (SP)
Play
DVD-R Video
Original
01 - 002
00:03:30
2
3
4
1
Timer recording start and stop time or remaining
1
2
3
time of one-touch recording
Shows the start and stop times if the current recording is
a timer recording. Shows the remaining recording time if
the current recording is the one-touch recording.
1
Disc type and mode
Shows the disc type (DVD-R, DVD-RW, CD, No Disk
etc.), and the disc mode for recordable DVD, if applicable
(VR or Video). Shows PBC if a Video CD is in playback
control (PBC) mode.
2
3
4
Current title and chapter number
Elapsed recording time
2
Current title and chapter number
Recording mode and Recording time available
(For CD/Video CD, shows current track)
Shows the current recording mode (XP, SP, LP, etc.), and
3
Elapsed title time
the available recording time on the disc.
(For CD, shows elapsed track time; for Video CD, shows
elapsed disc time.)
Note
• The Video mode disc displays become the same as a
DVD-Video disc once the disc is finalized.
Play display 2
1
2
• The total recording time figure shown in parenthesis
is calculated based on a 12cm/4.7GB disc at the
displayed record setting.
Play
DVD-VIDEO
01 - 002
00:03:30
! #
• Recording and playback times for TV recordings are
approximately 0.1% shorter than the actual time. This
is because of the slightly different frame rates of TV
broadcasts versus DVD.
Title Name
Title Total
Chapters
:
11/21 soccer game
01h30m00s
007
:
:
• This recorder can play PlayLists on discs recorded
using other recorders. However, these PlayLists
cannot be edited.
5
4
3
1
Angle indicator
• Copy Once or Can’t Record messages may appear
in the stop or recording displays. These indicate that
the broadcast TV program contains copy control
information.
Lights during multi-angle scenes.
2
Copy protected material (!) / PureCinema
indicator (#)
Shows ‘!’ if the playback material is copy-once protected.
Shows ‘#’ if the current video is 24 fps, progressive scan.
3
4
5
Current title name
Total running time of title
Total number of chapters in title
26
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
05
CPhlaapteyr b5 ack
Introduction
Using the Disc Navigator to browse
the contents of a disc
VR mode Video mode
Most of the features described in this chapter make use
of on-screen displays. Navigate these using the ꢀ/ꢁ/ꢂ/
ꢃ (cursor buttons) and ENTER. To go back one level
from any screen, use the RETURN button. Remember
also that the button guide at the bottom of every screen
shows which buttons do what.
Use the Disc Navigator to browse the contents of a
recordable disc and start playback.
Many of the functions covered in this chapter apply to
DVD discs, Video CDs and CDs, although the exact
operation of some varies slightly with the kind of disc
loaded. The following icons are provided to help you
quickly identify which instructions you need for which
kind of disc.
DISC NAVIGATOR
ENTER
HOME
MENU
DVD
Any kind of DVD, DVD-R or DVD-RW
DVD-Video
Commercially produced DVD or finalized
Video mode DVD-R/RW
1
Press HOME MENU and select ‘Disc Navigator’
from the on-screen display.
Alternatively, you can press DISC NAVIGATOR to go
Video mode
Video mode DVD-R/RW (unfinalized)
VR mode
CD
straight to the Disc Navigator screen.
VR mode DVD-RW
Audio CD
HOME MENU
Disc Navigator
Editing
Video CD
Video CD
Timer Recording
Initial Setup
Play Mode
• Some DVD-Video discs don’t allow certain playback
controls to operate at certain points in the disc. This
is not a malfunction.
ENTER
HOME MENU
Confirm
Exit
• When playing Video CDs, some functions are not
available in PBC mode.
2
Use the ꢂ/ꢃ (cursor left/right) buttons to select
a title to play.
• Playability of ‘DualDisc’
• You can also use the front panel + / – buttons.
– The DVD-Audio content on DVD side of a DualDisc
cannot be played with this product.
Disc Navigator
DVD-VR
Titles ORG 03, PL 02
Title 01
Remain 00h20m (XP)
Original
– The DVD-Video content on DVD side of a DualDisc
may or may not be played with this product.
The lively big tree
– Since audio content on ‘non-DVD’ side of a
DualDisc is not compliant with the Compact Disc
Digital Audio specification, it may or may not be
played with this product.
Recording Time 00h30m00s
01
02
03 PL01
06/29 TUE
11:00PM
06/30 WED
11:00PM
07/01 THU
11:00PM
07/02 FRI
11:00PM
– If you need further information about playability of
DualDisc, please see ‘Service & Support’ on the
• Some VR mode DVDs recorded on other recorders
may have a PlayList of virtual content. PlayList titles
appear in the Disc Navigator after the ‘Original’ titles.
3
Press ENTER to start playback.
27
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
05
CD
Video CD
Note
• The Disc Navigator is only accessible when there is a
disc loaded.
1
During playback, use the number buttons to
input a track number.
For example, for track 6, press 6; for track 24, press 2,
then 4.
• Another way to find a particular place on a disc is to
use the time search mode. See Search Mode on
page 30.
• To clear and start again, press CLEAR.
2
Optionally: Press ENTER.
Otherwise, just wait a few seconds and playback will
jump to the new track.
Navigating discs
ALL
During playback you can easily jump to another title,
chapter or track on a disc using the number buttons on
the remote.
Scanning discs
You can fast scan discs at various speeds, forwards or
backward.
1
4
7
2
5
8
3
6
9
CLEAR
0
ꢆ
ꢄ
ꢇ
ENTER
1
During playback, press ꢆ or ꢇ to start
reverse or forward scanning.
• The scanning speed is shown on-screen.
DVD-Video Video mode
2
Press the same button repeatedly to increase the
scanning speed.
1
During playback use the number buttons to
enter a chapter number within the current title.
For example, for chapter 6, press 6; for chapter 24,
press 2, then 4.
DVD
• Forward:
Scan1 ꢄ Scan2 ꢄ Scan3 ꢄ Scan4
• To clear and start again, press CLEAR.
• Reverse:
2
Optionally: Press ENTER.
Reverse ꢄ Scan1 ꢄ Scan2 ꢄ Scan3 ꢄ Scan4
Otherwise, just wait a few seconds and playback will
jump to the new chapter.
CD
Video CD
VR mode
• Forward/Reverse:
Scan1 ꢄ Scan2
1
During playback, use the number buttons to
3
To resume normal playback, press ꢄ.
input a title number.
For example, for title 6, press 6; for title 24, press 2,
then 4.
Note
• To clear and start again, press CLEAR.
• Depending on the disc, reverse playback may not be
smooth.
2
Optionally: Press ENTER.
Otherwise, just wait a few seconds and playback will
jump to the new title.
• Sound can be heard while scanning audio CDs
(analog output only).
• No subtitles are displayed while scanning DVD-Video
discs.
28
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
05
• When scanning DVDs with Dolby Digital or Linear
PCM sound on forward Scan1, Linear PCM is output
from the coaxial digital output. No sound is output
when using other scan speeds.
Frame advance/frame reverse
DVD
Video CD
• Depending on the disc, normal playback may
automatically resume when a new chapter is reached
on a DVD disc.
You can step forwards or backwards a frame at a time
through a DVD. With Video CDs, you can only use frame
advance.
Playing in slow motion
DVD
Video CD
You can play video at various slow motion speeds. DVDs
can be played in slow motion in either direction, while
Video CDs can only be played forwards in slow motion.
ꢌ/ꢋ
ꢎ/ꢍ
ꢄ
ꢈ
1
2
During playback, press ꢈ PAUSE.
Press ꢋ or ꢎ to go backwards or forwards one
ꢌ/ꢋ
ꢎ/ꢍ
frame.
ꢄ
3
To resume normal playback, press ꢄ.
ꢈ
Note
• Depending on the disc, normal playback may
automatically resume when a new chapter is reached
on a DVD disc.
1
2
During playback, press ꢈ PAUSE.
Press and hold ꢋ or ꢎ until slow motion
reverse or forward playback starts.
3
Press the same button repeatedly to change the
slow motion speed.
Slow 1/16
Slow 1/2
To resume normal playback, press ꢄ.
Slow 1/8
4
Note
• Reverse slow-motion playback may not be as smooth
as forward and may be better with some discs than
others.
• Depending on the disc, normal playback may
automatically resume when a new chapter is reached
on a DVD disc.
• No sound is output during slow-motion playback.
29
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
05
Search Mode
The Play Mode menu
ALL
ALL
The Search Mode feature lets you start playback from a
specified point in a disc by time or by title/chapter/track
number.
The Play Mode menu gives you access to search and
repeat play functions.
1
2
3
Select ‘Search Mode’ from the Play Mode menu.
Select one of the search options.
Important
• You can’t use the Play Mode features with Video CDs
playing in PBC mode, or while a DVD disc menu is
being displayed. For other restrictions, see the
following sections.
Use the number buttons to enter a title/chapter/
track number or the search time (in hours, minutes &
seconds).
Search Mode
Search Mode
Repeat
Time Search
Title Search
1
4
7
2
5
8
3
6
9
Chapter Search
CLEAR
0
Time Search (DVD): For example, for 25 minutes into the
current title, press 2, 5, 0, 0. For 1 hour and 15 minutes
and 20 seconds into the title, press 1, 1, 5, 2, 0.
ENTER
HOME
MENU
Time Search (Video CD): For example, for 45 minutes into
the disc, press 4, 5, 0, 0.
• You can also use the ꢀ/ꢁ (cursor up/down) buttons
and ENTER to input a time.
ꢄ
Input Time
00 : 25 : 00
1
Press HOME MENU and select ‘Play Mode’.
HOME MENU
Disc Navigator
Editing
Title/Chapter/Track Search: For example, for track 6,
press 6.
Timer Recording
Initial Setup
Play Mode
ENTER
HOME MENU
Confirm
Exit
Input Track
01/12
2
Use the ꢀ/ꢁ (cursor up/down) buttons and
ENTER to navigate.
• To exit the Play Mode menu, press HOME MENU.
4
Press ENTER.
Tip
• You can often select what you want to watch on a
DVD disc from the disc menu. Press MENU or TOP
MENU to display the disc menu.
30
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
05
Note
Displaying and switching subtitles
DVD-Video
• When using time search, playback may occasionally
start slightly before or after the time you input.
Some DVD discs have subtitles in one or more
languages, which you can switch during playback.
Repeat play
Check the disc packaging for details of the subtitle
options.
ALL
There are various repeat play options, depending on the
kind of disc loaded.
SUBTITLE
1
Select ‘Repeat’ from the Play Mode menu.
Play Mode
Search Mode
Repeat
CLEAR
1
Press SUBTITLE repeatedly to select a subtitle
option.
2
Use the ꢀ/ꢁ (cursor up/down) buttons to select
The current subtitle language is shown on-screen.
a repeat play mode.
Repeat
Repeat
Off
Subtitle: 1/2 English
The toucan lives in tropical forests
2
To switch off subtitles, press SUBTITLE
VR mode
repeatedly until ‘Off’ is displayed.
• For VR mode DVD discs, select Disc, Title or Chapter
(or Off).
Note
• Some discs only allow you to change subtitle
language from the disc menu. Press TOP MENU to
access.
DVD-Video Video mode
• For DVD-Video and Video mode DVD discs, select
Title or Chapter (or Off).
• To set subtitle preferences, see Language on page 54.
CD
Video CD
Switching DVD soundtracks
• For CDs and Video CDs, select Disc or Track (or Off).
DVD-Video
3
To resume normal playback, select ‘Off’ from the
Repeat Play menu.
When playing a DVD disc recorded with two or more
soundtracks (often in different languages), you can
switch the soundtrack during playback.
Check the disc packaging for details of the soundtrack
options.
AUDIO
31
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
05
•
Press AUDIO repeatedly to select an audio
CD
Video CD
soundtrack.
• Stereo – Stereo (default)
• 1/L – Left channel only
• 2/R – Right channel only
Audio
1/2 English
Dolby Digital 3/2CH
Note
• When playing a Dual Mono recording on a VR mode
disc, if you are listening to the Dolby Digital
soundtrack via the digital output, you cannot switch
the audio channel. Set Dolby Digital to Dolby
Digital -> PCM (see Audio Out on page 51) or listen
via the analog outputs if you need to switch the audio
channel.
Note
• The sound may drop out momentarily when
switching soundtracks.
• Some discs only allow you to change audio language
from the disc menu. Press TOP MENU to access.
Switching camera angles
DVD-Video
• To set audio language preferences, see Language on
page 54.
• Some discs feature both Dolby Digital and DTS
soundtracks. There is no analog audio output when
DTS is selected. To listen to the DTS soundtrack,
connect this recorder to a DTS decoder or AV amp/
receiver with built-in DTS decoder via the digital
output. See Connecting to an AV amplifier or receiver
on page 15 for connection details.
Some DVD-Video discs feature scenes shot from two or
more angles—check the disc box for details: it should be
marked with a
icon if it contains multi-angle scenes.
When a multi-angle scene is playing, the same icon
appears on screen to let you know that other angles are
available.
ANGLE
Switching audio channels
VR mode
CD
Video CD
For VR mode content that has both a main and a SAP
(Secondary Audio Program) audio channel, you can
switch between main (L), SAP (R), or both (L+R).
•
To switch the camera angle, press ANGLE.
• The angle number is displayed on-screen.
• If the disc was paused, playback starts again with the
new angle.
When playing Video CDs and audio CDs you can switch
between stereo, just the left channel or just the right
channel.
Note
• You can also change the angle from some DVD-Video
AUDIO
disc menus. Press TOP MENU to access.
1
To display/switch the audio channel, press
AUDIO repeatedly.
The audio channel(s) currently playing are indicated on-
screen.
VR mode
• L+R – Both channels (default)
• L – Left/main channel only
• R – Right/SAP channel only
32
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
06
CRhaepcteor 6rding
About DVD recording
Recording time and picture quality
This recorder can record on both DVD-R and DVD-RW
media. The main difference between the two is that DVD-
R discs can only be recorded once, while DVD-RW can be
recorded, erased and re-recorded many times.
There are six preset recording quality modes:
• XP – Highest quality setting, gives about one hour of
recording time.
• SP (Standard Play) – Default quality, used for most
applications, gives about two hours of recording
time.
A further difference between the two disc types is that
only DVD-RW can be initialized for VR mode recording,
which offers much more comprehensive editing
functions compared to Video mode recording.
• LP (Long Play) – Lower video quality than SP, but
doubles the recording time to about four hours.
The big advantage, however, of Video mode is its
compatibility with standard DVD players, most of which
will not play VR mode DVD-RW discs (see also the notes
below).
• EP (Extended Play) – Lower video quality than LP, but
this gives about six hours of recording time.
• SLP (Super Long Play) – Lower video quality than EP,
but this gives about eight hours of recording time.
While DVD-R discs can only be recorded using the Video
mode, you can initialize a DVD-RW disc for Video or VR
mode recordings. Once initialized (any previous content
is erased in this operation), all recordings on that disc
will be in the chosen recording mode.
• SEP (Super Extended Play) – Lowest video quality, but
gives about ten hours of recording time.
Please note that there is a trade-off between recording
time and quality. The longer the possible recording time,
the lower the recorded picture quality. You may wish to
try recording different kinds of program in different
modes to determine the combination of picture quality
and recording time that suits your needs.
Important
• You cannot play, edit or record on unfinalized DVD-R/
RW discs recorded in Video mode on other DVD
recorders. (Likewise, unfinalized Video mode discs
recorded on this recorder are not playable on other
players/recorders.)
We recommend that the XP mode be used for recording
fast moving or action programs.
In all except the XP mode, sound is recorded in two
channel Dolby Digital format. When set to XP, sound is
recorded in high quality, uncompressed Linear PCM
format.
• This recorder cannot record onto CD-R or CD-RW
discs.
• Pioneer takes no responsibility for recording failure
due to power cuts, defective discs, or damage to the
recorder.
If the broadcast audio has a SAP channel and you are
recording in Video mode, or in VR mode on the XP
setting, use the AUDIO button to select the Mono,
Stereo or SAP audio channel to record before recording
starts.
• Fingerprints, dirt and small scratches on a disc can
affect playback and/or recording performance.
Please take proper care of your discs.
Note
Note
• Note that all recording times (both here and those
shown by the recorder) are only approximate. This is
because of the way that the video is recorded; you
may get slightly more or slightly less, depending on
what you’re recording.
• Some DVD players, such as some Pioneer models,
are compatible with VR mode DVD-RW discs. Check
the operating instructions for your player for VR
mode compatibility information.
• The maximum number of titles that can be recorded
on a DVD-R/RW disc is 99.
• The maximum number of chapters recordable on a
DVD-R/RW disc is 999.
33
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
06
Restrictions on video recording
Setting the picture quality/recording
time
• You cannot record copy-protected video using this
recorder. Copy-protected video includes DVD-Video
discs and some satellite broadcasts. If copy-
protected material is encountered during a
VR mode Video mode
Before starting a recording, you will usually want to set
the picture quality/recording time. There are six standard
settings available, which allow you to choose a balance
between picture quality and recording time.
recording, recording will pause automatically and an
error message will be displayed on-screen.
• Video that is ‘copy-once only’ can only be recorded on
a DVD-RW disc in VR mode (see below).
• When recording a TV broadcast or through an
external input, you can display copy control
information on screen. (see Displaying disc
information on-screen on page 25).
REC MODE
CPRM
CPRM is a copy protection system with scramble system
regarding the recording of ‘copy once’ broadcast
programs. CPRM stands for Content Protection for
Recordable Media.
•
Press REC MODE repeatedly to select a recording
setting.
• XP – Fine picture quality
• SP – Standard play
• LP – Long play
This recorder is CPRM compatible, which means that
you can record copy-once broadcast programs, but you
cannot then make a copy of those recordings. CPRM
recordings can only be made on CPRM-compatible DVD-
RW (ver. 1.1 or higher) discs formatted in VR mode.
• EP – Extended play
• SLP – Super Long Play
• SEP – Super Extended Play
DVD CPRM recordings can only be played on players that
are specifically compatible with CPRM.
The setting is indicated in the front panel display, and
shown on-screen together with the recording time for a
blank recordable disc. If a recordable disc is loaded, the
approximate remaining recording time for that disc is
also shown. (Note that if the On Screen display setting
(see Display on page 48) is Off then this information is
not displayed.)
Recording equipment and copyright
You may use this product only to reproduce or copy
materials for which you own the copyright or have
obtained permission to copy from the copyright owner or
for which you otherwise have a legal right to reproduce or
copy. Unless you own the copyright or have obtained
permission from the copyright owner or otherwise have a
legal right to reproduce or copy, you may be violating the
law, including copyright law, and may be subject to
payment of damages and other remedies.
• This product incorporates copyright protection
technology that is protected by method claims of
certain U. S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
34
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
06
3
Use the REC MODE button to set the picture
quality/recording time.
• See Setting the picture quality/recording time above
Basic recording from the TV
VR mode Video mode
for detailed instructions.
Follow the instructions below to record a TV program.
Recording starts immediately and continues until the
disc is full or you stop the recording.
4
If the broadcast audio has a SAP channel (Second
Audio Program), press AUDIO to select the audio
channel to record.
Press repeatedly to switch between Mono, Stereo and
SAP audio channels.
• When recording in VR mode, both mono and SAP
audio channels are recorded, allowing you to switch
the audio channel on playback. The only exception to
this is when the picture quality is set to XP, in which
case you do need to select the audio channel before
recording.
AUDIO
1
4
7
2
5
8
3
6
9
5
Press ì REC to start recording.
If you want to set a recording end time, press the ì REC
button repeatedly. The recording time increases in 30
minute increments, up to a maximum of ten hours. The
time the recording will end is shown on-screen and in the
front panel display. When the recording ends, the
recorder automatically switches into standby.
0
CH+
ENTER
CH–
• To cancel the set recording time, press ì REC.
• If you want to pause recording at any time, press
ꢈ. Press again to restart the recording. (If recording
in VR mode, a new chapter is started after recording
restarts)
ꢈ
ꢃ
ìREC REC MODE
6
To stop the recording, press ꢃ.
• If you set the recording time in the previous step, you
can still stop the recording anytime by pressing ꢃ.
• Recording will stop automatically when there is no
more space on the DVD.
DVD RECORDER
1
2
Load a recordable disc.
• If you load a new blank DVD-RW disc, the recorder
takes a short while to initialize the disc.
Setting a timer recording
VR mode Video mode
Use the CH +/– buttons to select the TV channel
Using the timer recording features you can program up
to 32 timer recordings up to a month in advance. Timer
recording programs can be set to record just once, every
day, or every week.
to record.
The front panel display shows the channel number:
0 0 7
You can set the recorder so that it will adjust the
recording quality to try and fit the recording on to the disc
if it would not otherwise fit at the recording quality you set
(see Optimized Rec on page 52 for more on this).
• While the recorder is stopped, you can also use the
number buttons on the remote to select the channel.
(For channel 6, press 6 then ENTER; for channel 24,
press 2, 4 then ENTER)
Important
• A timer recording can’t be set if:
– There are already 32 timer programs waiting to be
recorded.
• If the recorder is stopped, you can also use the +/–
buttons on the front panel to select the channel
number.
35
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
06
• Timer recording will not start if:
– The recorder is already recording.
– A disc is being initialized, finalized or unfinalized.
• You can also access the Timer Recording screen
from the Home Menu (press HOME MENU, select
Timer Recording, then Timer Rec (View)).
• Except when finalizing Video mode discs, timer
recording will start when the operation preventing
timer recording has finished.
Timer Rec (View)
Date
Start
7:00 AM
Stop
08:00 AM
New Input
CH
002
Rec Mode
SP
12/12 SUN
Timer program
already set
• If a disc is playing when a timer recording is due to
start, playback will automatically stop to allow the
recording to start.
Select here to
input a new
timer program
• The timer indicator lights in the front panel display
when the timer is active. If the indicator is blinking it
means that there is no disc loaded, or the disc loaded
is not recordable.
Remain
01h00m(XP)
1/1
Free space on the
loaded disc
Number of programs
already set
• Approximately two minutes before a timer recording
is set to start, the recorder will go into timer recording
standby (assuming that a recordable disc is loaded).
In timer recording standby you cannot use some
functions.
• If there are more than eight timer programs already
set, press ꢊto switch page (go back using the ꢉ
button).
• You can also clear a timer program before it’s started
by highlighting it and pressing CLEAR.
2
Select ‘New Input’ to set a new timer program,
CLEAR
then press ENTER.
Timer Rec (View)
Date
Start
07
Stop
00 AM 08 00 AM
CH
002
RecMode
SP
12/12 SUN
:
:
Program Set
ENTER
HOME
MENU
ꢉ
ꢊ
3
Enter the timer recording settings.
Use the ꢂ/ꢃ buttons to select a field; use the ꢀ/ꢁ
buttons to change the value.
TIMER REC
• Date – Choose a date up to one month in advance, or
select a daily or weekly program.
1
Press TIMER REC then select ‘Timer Rec (View)’ to
display the Timer Recording screen.
• Start – Set the recording start time.
Timer Recording
• Stop – Set the recording end time (maximum length
of a timer recording is 10 hours).
VCR Plus+
Timer Rec (View)
• CH – Choose a channel (2–69 or 1–125 for antenna or
cable channels respectively, excluding skip
channels), or one of the external inputs from which to
record.
• RecMode – Select XP, SP, LP, EP, SLP or SEP (See
Recording time and picture quality on page 33).
4
After entering all the timer recording
information, highlight ‘Program Set’ and press
ENTER.
The timer recording list screen is displayed again. The
timer program you just input appears in the list.
36
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
06
5
To exit the timer recording screen, press HOME
3
If you want to change the recording quality, use
MENU.
the ꢂ/ꢃ buttons to highlight Rec Mode, then use
the ꢀ/ꢁ buttons to change.
• If you change the Auto Channel Setting (from cable
to antenna or the other way around), existing timer
programs will be erased.
Timer Rec (View)
Date
Start
07
Stop
00 AM 08 00 AM
CH
002
RecMode
SP
12/12 SUN
:
:
®
Timer recording using the VCR Plus+
Program Set
programming system
This system makes programming timer recordings very
simple. Most TV guides publish PlusCode numbers with
their program details. If you want to make a timer
recording of a program, you just input the corresponding
code. The date, start, stop and channel settings are made
automatically. All you have to do is tell the recorder the
recording mode, and whether it’s a once-only recording
or a regular recording.
• See also Recording time and picture quality on
page 33 and Setting the picture quality/recording time
on page 34.
4
After making the settings, press ENTER.
• If you haven’t set up the guide channels (or at least
the guide channel for the PlusCode number that you
entered), the recorder will prompt you to enter the
channel number that the TV program is showing on.
VCR
1
4
7
2
5
8
3
6
9
Plus+
CLEAR
0
Tip
• You can check the timer program settings by
pressing TIMER REC to display the timer recording
screen.
ENTER
HOME
MENU
Extending a timer recording in progress
You can extend a timer recording beyond the
programmed end time in two different ways. This can be
useful if a broadcast program overruns, for example.
1
Press ‘VCR Plus+’ to display the VCR Plus+
program screen.
You can also access this screen from the Home Menu
(press HOME MENU, select Timer Recording, then VCR
Plus+).
ENTER
2
Use the number buttons to enter a PlusCode
HOME
MENU
number, then press ENTER.
To clear the last digit entered, press CLEAR.
VCR Plus+
ꢃ
PlusCode#
3 9 9 2 4
(0) - (9) to input
ìREC
TIMER REC
Moving the end time by 30-minute blocks
During timer recording, press and hold ì REC for
1
three seconds.
The timer indicator disappears from the front panel
display.
37
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
06
2
Press ì REC repeatedly to extend recording in 30
minute increments.
ꢃ
Programming a new end time
ìREC
1
During timer recording, press TIMER REC to
display the Timer Recording screen.
You can also access the Timer Recording screen from
the Home Menu (press HOME MENU, select Timer
Recording, then Timer Rec (View)).
1
During timer recording, press and hold ì REC for
Timer Rec (View)
three seconds.
Only the program is canceled (the timer indicator
disappears); recording continues so that you can
manually stop recording whenever you like.
Date
Start
7:00 AM
Stop
08:00 AM
New Input
CH
002
Rec Mode
SP
12/12 SUN
2
When you want to stop recording completely,
press ꢃ.
Remain
01h00m(XP)
1/1
Preventing use of the recorder before a
timer recording (child lock)
2
Use the ꢀ button to highlight the current timer
You can make all the front panel and remote control
buttons inoperative using the child lock feature. This is
useful when you set a timer recording and want to make
sure that the timer settings are not changed before
recording has finished.
recording, then press ENTER.
A screen showing details of the timer recording appears.
From this screen, only the recording stop time can be
changed.
Timer Rec (View)
1
If the recorder is on, switch it into standby.
Date
Start
07
Stop
00 AM 08 00 AM
CH
002
RecMode
SP
12/12 SUN
:
:
2
Press and hold ꢃ on the front panel for three
Program Set
seconds to lock the controls.
The front panel display briefly shows LOCK. If any buttons
are pressed on the remote or front panel, LOCK is briefly
displayed again.
• To unlock the recorder, press and hold ꢃ on the front
panel for three seconds until the display shows
UNLOCK.
3
Set a new Stop time for the timer recording.
Use the ꢂ/ꢃ buttons to select the hour or minute field,
• To cancel a timer recording when the recorder is
locked, first unlock the recorder (see above), then
press and hold ì REC for three seconds.
then use the ꢀ/ꢁ buttons to change the time.
4
Press ENTER to set the new time and exit the
screen.
Recording will continue until the new stop time is
reached.
Timer recording FAQ
Canceling and stopping a timer recording in
progress
After a timer recording has started, you can cancel the
program (but continue recording), or stop recording
completely if you need to.
Frequently Asked Questions
• Even though the timer is set, the recorder doesn’t start
recording!
Check that the disc loaded is recordable, not locked
(see Lock Disc on page 49), and that there are fewer
than 99 titles already on the DVD.
• The recorder won’t let me enter a timer program! Why
not?
You can’t enter a timer program if the clock isn’t set.
38
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
06
• What happens when two or more timer programs
overlap?
Note
• If your source is copy-protected using CopyGuard,
you will not be able to record it. See Restrictions on
video recording on page 34 for more details.
Basically, the program with the earlier recording start
time has priority. However, the recorder will start
recording the program with the later start time after
the earlier program is finished. If two programs have
the same times (but different channels, for example),
the program set most recently takes priority.
Playing your recordings on other DVD
players
VR mode Video mode
Recording from an external
component
Most regular DVD players can play finalized discs
recorded in Video mode. A number of players (including
many Pioneer models) can also play DVD-RW discs
recorded in VR mode, finalized or not. Check the manual
that came with the player to check what kinds of discs it
will play.
VR mode Video mode
You can record from an external component, such as a
camcorder or VCR, connected to one of the recorder’s
external inputs.
When you finalize a Video mode disc, a title menu is
created from which you can select titles when you play
the disc. These menus are navigated in the usual way,
pressing MENU or TOP MENU to display the menu, then
using the ꢀ/ꢁ/ꢂ/ꢃ (cursor buttons) followed by
ENTER to select titles and start playback.
INPUT
Finalizing a disc
VR mode Video mode
ìREC REC MODE
Finalizing ‘fixes’ the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
1
Make sure that the component you want to
record from is connected properly to the DVD
recorder.
Important
• Once you’ve finalized a disc recorded in Video mode,
you can’t edit or record anything else on that disc.
However, the finalization on a DVD-RW disc maybe
‘undone’; see Undo Finalize on page 49 for how to do
this.
See Chapter 2 (Connecting up) for connection options.
2
Press INPUT repeatedly to select one of the
external inputs to record from.
There are two analog inputs. The current input is shown
on-screen and in the front panel display:
• A VR mode disc can still be recorded and edited on
this recorder even after finalizing.
• L1 – Input 1
• L2 – Input 2 (front panel)
1
Load the disc you want to finalize.
Check that the Audio In setting for Dual Mono
Recording is as you want it (see Audio In on page 51).
Make sure that the recorder is stopped before
proceeding.
• If the aspect ratio is distorted (squashed or
stretched), adjust on the source component or your
TV before recording.
2
3
Press HOME MENU and select ‘Initial Setup’.
Press ꢁ to select ‘Disc’.
3
4
Set up the recorder.
Initial Setup
• Use REC MODE to set the recording quality. See
Setting the picture quality/recording time on page 34
for detailed information.
Basic
Lock Disc
Initialize
Finalize
Disc
Video
Audio
Recording
Playback
Press ì REC when you’re ready to start
recording.
39
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
06
4
5
6
Select ‘Finalize’.
Important
Disc
• Initializing a disc will erase everything recorded on it.
Make sure there is nothing on the disc that you want
to keep!
Basic
Lock Disc
Initialize
Finalize
Finalize
Disc
Undo Finalize
Video
• You may not be able to re-initialize a disc in a different
format if it was originally initialized on an older DVD
recorder.
Audio
Recording
Playback
1
2
Press HOME MENU and select ‘Initial Setup’.
Select Finalize ‘Start’.
Press ꢁ to select ‘Disc’.
Finalize
Initial Setup
Finalize
Start
Start
Basic
Lock Disc
Initialize
Finalize
Undo Finalize
Disc
Video
Audio
Recording
Playback
Video mode only: All the titles on the disc are
displayed.
3
Select ‘Initialize’
Disc
Title Menu
01
01/02
Basic
Lock Disc
Initialize
Finalize
VR Mode
02
03
Disc
Video Mode
Video
06/29 TUE
11:00PM
06/30 WED
11:00PM
07/01 THU
11:00PM
Audio
Recording
Playback
04
05
06
07/03 SAT
11:00PM
07/04 SUN
11:00PM
07/02 FRI
11:00PM
4
Select ‘Video Mode’ or ‘VR Mode’ from the
initialize options.
7
The recorder will now start finalizing the disc.
Initialize
during finalization:
VR Mode
Start
Start
Video Mode
Finalizing disc
1 min left
Please wait a moment.
• How long finalization takes depends on the type of
disc, how much is recorded on the disc and the
number of titles on the disc. A disc recorded in VR
mode can take up to one hour to finalize. A disc
recorded in Video mode can take up to 20 minutes.
5
Select ‘Start’.
It takes about 30 seconds to initialize the disc.
Initializing disc
1 min left
Please wait a moment.
Initializing a DVD-RW disc
DVD-RW
Note
When you first load a blank disc, the recorder will
initialize it automatically for recording. You can also
manually initialize DVD-RW discs.
• By default, the recorder initializes blank DVD-RW
discs for VR mode recording. See DVD-RW Auto Init.
on page 52 if you want to change the default to Video
mode.
You can initialize a disc for either Video mode recording
or VR mode recording.
• If a disc was previously finalized on an older DVD
recorder, you may not be able to re-initialize and/or
initialize it for Video mode recording.
40
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
07
CEhdapitetri7ng
Using this recorder you can edit video content on
unfinalized Video mode and VR mode DVD discs. More
detailed editing is possible on VR mode discs, which can
be edited at the chapter level. Video mode discs can only
be edited at the title level.
Editing Titles (Title Edit)
Erase
Once a Video mode disc has been finalized, further
editing is not possible.
VR mode Video mode
Use this command to erase individual titles from a disc.
1
Press HOME MENU and select ‘Editing’ from the
When erasing Original content from a VR mode DVD-
RW, the available recording time will increase as titles
are erased. Erasing a title from a Video mode DVD-RW
disc increases the available recording time only if it is the
last title on the disc.
on-screen display.
HOME MENU
Disc Navigator
Editing
Since DVD-R is not erasable/rewritable, erased titles do
not free up space on the disc, even though they are not
visible anymore.
Timer Recording
Initial Setup
Play Mode
ENTER
HOME MENU
Confirm
Exit
1
Select ‘Erase’ from the Title Edit menu options.
2
Use the ꢀ/ꢁ buttons to select ‘Title Edit’ or
2
Use the ꢂ/ꢃbuttons to select the title you want
‘Chapter Edit’ from the Editing menu.
to erase, then press ENTER.
Editing
Recording time
available in the displayed
recording mode
Disc recording
mode
Title Edit
Erase
Chapter Edit
Title Name
Navi Mark
Edit mode
Erase
Lock
Erase All
DVD-VR
Titles 04
Title 01
The lively big tree
Remain 00h20m (XP)
Original
Recording Time 00h30m00s
The following title editing functions are available:
• Erase – Erase a title (page 41)
01
02
03 04
06/29 TUE
11:00PM
06/30 WED
11:00PM
07/01 THU
11:00PM
07/02 FRI
11:00PM
• Title Name – Name or rename a title (page 42)
• Navi Mark (VR mode only) – Change the thumbnail
image of a title (page 42)
Currently
selected title
Locked title
indicator
• Lock (VR mode only) – Lock or unlock a title to
prevent accidental changes being made (page 43)
Information for
selected title
• Erase All – Erase all titles (page 43)
3
Highlight ‘Yes’ to confirm, or ‘No’ to cancel, then
The following chapter editing functions are available for
VR mode discs only:
press ENTER.
When the last title is erased, you will automatically be
taken back to the Home Menu.
• Erase – Erase a chapter (page 43)
• Divide – Divide a chapter into two new chapters
(page 44)
4
Press RETURN to go back to the Title Edit menu
options, or select another title to erase.
• Combine – Combine two chapters into one (page 44)
41
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
07
Title Name
Navigation Mark (Navi Mark)
VR mode Video mode
VR mode
You can give titles names up to 64 characters long for VR
mode recordings and 32 characters for Video mode
recordings.
Use this function to select a frame from a title to use as
that title’s thumbnail image in the Disc Navigator.
1
Select ‘Navi Mark’ from the Title Edit menu
1
Select ‘Title Name’ from the Title Edit menu
options.
options.
2
Use the ꢂ/ꢃ buttons to select the title then
2
Use the ꢂ/ꢃbuttons to select the title you want
press ENTER.
to name, then press ENTER to go to the name input
screen.
3
Use the playback controls (ꢄ, ꢈ, ꢇ, ꢎ, etc.) to
find the frame you want to use for the thumbnail
picture.
3
Input a name for the selected title.
Input area
Currently selected title number
Information for
Cursor to select character
Title Name
Sum total of the chapter
in the selected title
selected chapter
T h e l i v e l y b i g t r e e
CAPS
A B C D E F G H I
J
K L M .
,
)
I
?
:
!
;
Recording time
of the selected title
Edit mode
N
O
P
A
O
2
Q
A
O
3
R S T U V WX Y Z
(
I
small
ç
A A
A
O
4
A
O
5
[
§
·
Æ
O
6
E
U
8
E
U
9
÷
<<
E
U
<
x
E
U
=
I
I
#
%
D
0
N
1
+
ø
7
]
Y
>
{
ß $
_
&
Navi Mark
~
}
–
/
@
¥
ˆ
|
¡
_
a
c
£
\
µ
¨
© –
¬
–
®
˚
`
Title 01
Chapters 007
Recording Time 00h20m
< < 14
/
o
1
1
3
2
3
¿
¸
¶
–
/2
/4
´
The lively big tree
Chapter Time 00h05m02s
Chapter 001
OK
Clear
Space
ꢄ
H
M
S
00 : 03 : 30
Cursor to
select input
position
Area to select
character
Change
Back
• A name generated automatically by the recorder will
already be in the name input section of the screen.
Playback
indicator
Playback time
Chapter point
• Use the ꢀ/ꢁ/ꢂ/ꢃ (cursor buttons) and ENTER to
select characters.
Playback point
Currently selected chapter number
• Select CAPS or small to change to upper or lower-
case.
4
When the frame you want to use is displayed,
• Use the CLEAR button to delete characters directly
(press and hold for two seconds to delete the whole
name).
select ‘Change’ then press ENTER.
5
To return to the title selection screen, press
RETURN, or select ‘Back’ then press ENTER.
• For discs formatted on a different DVD recorder, you
will see only a limited character set.
6
Press RETURN to go back to the Title Edit menu
options, or select another title to change.
4
Highlight ‘OK’ then press ENTER to enter the
name and return to the title selection screen.
• To return to the title selection screen without saving
changes to the title name, press RETURN.
5
Press RETURN to go back to the Title Edit menu
options, or select another title to name.
42
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
07
Lock
Editing chapters (Chapter Edit)
VR mode
VR mode
You can lock a title so that it can’t be edited or erased
accidently. If you do need to edit it, you can always unlock
it later.
When editing VR mode DVDs you can edit individual
chapters within a title, with commands for erasing,
combining and dividing.
1
Select ‘Lock’ from the Title Edit menu options.
2
Use the ꢂ/ꢃbuttons to select the title you want
Erase
to lock (or unlock), then press ENTER.
VR mode
Lock
Use this command to erase individual chapters from a
title.
DVD-VR
Titles 04
Title 01
The lively big tree
Remain 00h20m (XP)
Original
1
Select ‘Erase’ from the Chapter Edit menu
Recording Time 00h30m00s
options.
01
02
03 04
2
Use the ꢂ/ꢃ buttons to select the title
06/29 TUE
11:00PM
06/30 WED
11:00PM
07/01 THU
11:00PM
07/02 FRI
11:00PM
containing the chapters you want to erase, then
press ENTER.
An unlocked title will become locked; a locked title will be
unlocked. Locked titles are displayed with a padlock icon.
Erase
DVD-VR
Titles 04
Title 01
The lively big tree
Remain 00h20m (XP)
Original
3
Press RETURN to go back to the Title Edit menu
options, or select another title to lock/unlock.
Recording Time 00h30m00s
01
02
03 04
Erase All
06/29 TUE
11:00PM
06/30 WED
11:00PM
07/01 THU
11:00PM
07/02 FRI
11:00PM
VR mode Video mode
This command erases all unlocked titles from the disc
(see also Lock on page 43).
3
Use the ꢀ/ꢁ/ꢂ/ꢃ (cursor buttons) to select the
chapter you want to erase, then press ENTER.
When editing a DVD-RW, the available recording time
will increase when titles are erased. Since DVD-R is not
erasable/rewritable, the erased titles do not free up space
on the disc, even though they are not visible anymore.
Erace
Title 01
Chapters 011
Chapter 001
Recording Time 00h20m
The lively big tree
Chapter Time 00h05m02s
1
Select ‘Erase All’ from the Title Edit menu
options.
001
005
002
003
007
004
008
Title Edit
006
Title Edit
Erase
Chapter Edit
Title Name
Navi Mark
Lock
4
Highlight ‘Yes’ to confirm, or ‘No’ to cancel, then
Erase All
press ENTER.
5
To return to the title selection screen, press
Yes
No
Erase all titles?
RETURN.
2
Select ‘Yes’ to confirm, or ‘No’ to cancel, then
6
Press RETURN to go back to the Chapter Edit
press ENTER.
menu options, or select another title to edit.
When all titles are erased, you will automatically be taken
back to the Home Menu.
43
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
07
Divide
Combine
VR mode
VR mode
Use this command to divide a chapter into two new ones.
Use this function to combine two adjacent chapters into
one.
1
Select ‘Divide’ from the Chapter Edit menu
options.
1
Select ‘Combine’ from the Chapter Edit menu
options.
2
Use the ꢂ/ꢃ buttons to select the title
containing the chapter you want to divide, then
press ENTER.
2
Use the ꢂ/ꢃ buttons to select the title
containing the chapters you want to combine, then
press ENTER.
3
Use the ꢀ/ꢁ/ꢂ/ꢃ (cursor buttons) to select the
chapter, then press ENTER.
Selected chapter number
Sum total of the chapter
Currently selected title number
Recording time
of the selected title
in the selected title
Sum total of the chapter
in the selected title
Edit mode
Recording time
of the selected title
Edit mode
Combine
Title
number
Divide
Title 01
Chapters 011
Chapter 001
Recording Time 00h20m
Title 01
Chapters 011
Chapter 001
Recording Time 00h20m
The lively big tree
Chapter Time 00h05m02s
The lively big tree
Chapter Time 00h05m02s
001
005
002
003
007
004
008
001
005
002
003
007
004
006
006
008
Information for
selected chapter
Selected boundary line
Information for
selected chapter
Currently selected
chapter
Movie before and behind
a selected boundary line
Currently selected
chapter number
3
Highlight the bar divider between the two
chapters you want to combine, then press ENTER.
4
Use the playback controls (ꢄ, ꢈ, ꢆ, ꢇ, etc.) to
find the place you want to divide the chapter.
Combine
Title 01
Chapters 011
Chapter 001
Recording Time 00h20m
Divide
Title 01
Chapters 007
The lively big tree
Chapter Time 00h05m02s
Recording Time 00h20m
The lively big tree
Chapter Time 00h05m02s
Chapter 001
001
005
002
003
007
004
008
ꢄ
H
M
S
00 : 03 : 30
006
Divide
Back
4
To return to the title selection screen, press
RETURN.
5
Select ‘Divide’ and press ENTER to divide the
chapter.
5
Press RETURN to go back to the Chapter Edit
menu options, or select another title to edit.
6
To return to the chapter selection screen, press
RETURN, or select ‘Back’ then press ENTER.
Note
7
Press RETURN to go back to the Chapter Edit
• It may not always be possible to combine two
chapters, even though they are adjacent. If a chapter
has been divided into three, then the middle chapter
erased, it is not possible to combine the two
remaining chapters into one.
menu options, or select another title to edit.
Note
• When divided, both of the new chapters must be
longer than three seconds.
44
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
08
Chapter 8
The Initial Setup menu
1
Select ‘Auto’.
Using the Initial Setup menu
Clock
The Initial Setup menu is where you can set various
recorder options for sound, picture, language and so on.
Auto
Date
Manual
Time
Clock Set CH
•
Press HOME MENU and select ‘Initial Setup’.
HOME MENU
Disc Navigator
Editing
2
Set ‘Clock Set CH‘ to the channel preset number
Timer Recording
Initial Setup
Play Mode
that broadcasts a clock signal.
Auto
ENTER
HOME MENU
Confirm
Exit
Auto
Date
- -
- -
/
:
- -
/
- - - -
Manual
Time
- - AM
0 0 2
• Some settings can only be changed when the
recorder is stopped. during playback these settings
are grayed out in the Initial Setup menu.
Clock Set CH
Start
• Except for the Setup Navigator, menu screens are
exited automatically after 20 minutes of inactivity.
3
Move the cursor down to ‘Start’ and press
ENTER.
Basic settings
Auto
Auto
Date
- -
- -
/
:
- -
/
- - - -
Manual
Time
- - AM
0 0 2
Clock
Clock Set CH
The date (month, day, year) and time must be set before
you can use any of the timer recording features.
Start
The clock can be set automatically if there is a broadcast
station transmitting clock signals, or manually. Select
Auto to set the clock automatically or Manual to display
the clock setting screen.
The time and date is displayed when the recorder has
successfully set the clock.
Auto
Initial Setup
Auto
Date
01
12
/
:
01
/
2005 SAT
Basic
Disc
Clock
Manual
Time
00 AM
Tuner
Video
Clock Set CH
0 0 2
Start
Next
OSD Language
Audio
Display
Recording
Remote Control
Setup Navigator
Playback
• If the time could not be set, press RETURN to go back
to the previous screen and select Manual.
•
Auto clock setting
Some TV channels broadcast time signals together
with the program. This recorder can use these
signals to set the clock automatically.
•
Manual clock setting
If no stations in your area are broadcasting time
signals, you can set the clock manually:
45
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
08
1
Select ‘Manual’.
Tuner
Clock
Basic
Auto
Date
Basic
Clock
Auto CH Setup
Manual CH Setup
Guide CH Setup
Manual
Time
Disc
Tuner
Time Zone
D.S.T.
Video
OSD Language
Display
Audio
Recording
Playback
Remote Control
Setup Navigator
2
Use the ꢂ/ꢃ buttons to set your time zone,
Auto CH Setup
then press ENTER.
• Default setting: Antenna
Manual
Tuner
Auto
Date
01
12
/
:
01
00 AM
USA
Alaska
Off
/
2005 SAT
Manual
Time
Auto CH Setup
Manual CH Setup
Guide CH Setup
Antenna
Cable
Time Zone
D.S.T.
3
Press ꢁ then use the ꢂ/ꢃ buttons to set
Auto Channel Setting automatically tunes the built-in TV
tuner to terrestrial broadcast TV channels or cable
channels.
daylight saving time (D.S.T.) On or Off, then press
ENTER.
Manual
1
Select ‘Antenna’ or ‘Cable’, depending on how
Auto
Date
01
12
/
:
01
00 AM
USA
Alaska
On
/
2005 SAT
you receive your TV channels.
Manual
Time
Time Zone
Auto CH Setup
D.S.T.
Auto CH Setup
Manual CH Setup
Guide CH Setup
Antenna
Cable
4
Set the current date and time.
Manual
Auto
Date
01
12
/
:
01 / 2005 SAT
00 AM
2
Wait for the automatic tuning to finish.
Manual
Time
Time Zone
USA
Alaska
Tuning
Please wait a moment.
D.S.T.
On
20/68
Cancel
After automatic tuning has finished, a channel mapping
summary screen is displayed.
Use the ꢀ/ꢁ buttons to change the value in the
highlighted field.
Use the ꢂ/ꢃ buttons to move from one field to
another.
Auto CH Setup
CH
Skip
CH
009
Skip
Off
CH
017
Skip
Off
002
On
010
011
012
013
014
015
016
Off
Off
Off
Off
Off
Off
Off
018
019
020
021
022
023
024
Off
Off
Off
Off
Off
Off
Off
5
Press ENTER to finish setting the time.
003
004
005
006
007
008
On
On
On
On
On
Off
1/3
3
Press ENTER to return to the main menu screen.
46
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
08
Guide CH Setup
• Default setting: n/a
Note
• If you want to cancel before tuning has finished,
press ENTER.
Guide channels are used by the VCR Plus+ system so
that the channel number specified in the VCR Plus+
programming numbers can be guaranteed to
correspond to the correct station.
• You can manually tune and skip blank channels
using the Manual CH Setting, below.
1
Select ‘Guide CH Setup’, then ‘Guide CH’.
Manual CH Setup
• Default setting: n/a
Tuner
Auto CH Setup
Manual CH Setup
Guide CH Setup
Guide - CH
Tuner
Auto CH Setup
Manual CH Setup
Guide CH Setup
Channel
Skip
AFT
2
Assign channel numbers to the guide channels as
necessary.
From the manual channel setup screen you can
manually fine tune channels and set channels to skip.
Look in your TV guide to see which channel numbers
should be assigned to which guide channels.
The skip function lets you skip channels where there is no
station so that as you change channels using the
CHANNEL +/– buttons or the number buttons, you only
change to channels that have a station.
Guide CH Setup
Auto CH Setup
Manual CH Setup
Guide CH Setup
Guide - CH
1/20
1
2
3
4
5
0 0 6
6
7
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
1
Select ‘Manual CH Setup’ to display the manual
8
9
channel setup screen.
10
Manual CH Setup
Auto CH Setup
Manual CH Setup
Guide CH Setup
Channel
Skip
002
Off
On
• Use the ꢀ/ꢁ buttons to change the guide channel
for setting.
AFT
• Use the ꢂ/ꢃ buttons to change the channel
number.
• Use the PREV / NEXT button to display the previous/
next 10 guide channels.
• Use the ꢀ/ꢁ buttons to change the guide channel
3
To return to the previous screen, press ENTER or
RETURN.
for setting.
• If you want to skip the displayed channel (because
there is no station assigned to that channel), change
the Skip setting to On.
OSD Language
• Default setting: English
• If you want to manually tune the displayed channel,
change the AFT (Auto Fine Tuning) setting to Off,
then move down to Level to manually tune to a
station.
Basic
Basic
Clock
Disc
Tuner
Video
OSD Language
Display
Manual CH Setup
Audio
Recording
Playback
Remote Control
Setup Navigator
Auto CH Setup
Manual CH Setup
Guide CH Setup
Channel
Skip
002
Off
Off
+32
AFT
Level
This sets the language of the on-screen menus and
displays.
2
To return to the Initial Setup menu, press ENTER.
47
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
08
•
Select ‘OSD Language’ then use the ꢂ/ꢃ
There are three different recorder IDs. When set to
Recorder2 or Recorder3, the remote control mode is
shown in the front panel display.
buttons to select a language option.
OSD Language
Remote Control
OSD Language
English
Remote Control
Recorder1
Display
After selecting a new recorder ID, you have to confirm the
change by selecting Yes or No (use the ꢂ/ꢃ buttons),
then pressing ENTER.
• Default setting: On
Basic
Remote Control
Basic
Clock
OSD Screen
Front Panel
Disc
Tuner
Remote Control
Recorder2
Video
OSD Language
Display
Audio
Recording
Playback
Remote Control
Setup Navigator
After changing this setting, the remote
control mode must be changed.
OK to Continue ?
Yes
No
You can have the recorder show or hide on-screen
operation displays (for Play, Stop, etc.), and choose
whether to switch the front panel display on or off when
the recorder is in standby.
Note that as soon as you change the recorder ID, the
remote becomes inoperative until you change the remote
to the same ID.
To set the remote, press and hold RETURN and a number
button (1, 2 or 3) for five seconds.
Display
OSD Screen
Front Panel
On
On
Setup Navigator
• Default setting: n/a
Basic
Basic
Clock
OSD Language
Tuner
Disc
Tuner
Video
OSD Language
Display
Clock
Remote Control
Audio
Recording
Playback
• Default setting: Recorder1
Remote Control
Setup Navigator
You only need to set this if you are using more than one
Pioneer DVD recorder in the same room.
The Setup Navigator appears automatically when you
switch on the recorder for the first time (or after resetting
the recorder). It is also available from the Initial Settings
menu should you need it at any other time.
Basic
Basic
Clock
Disc
Tuner
Video
OSD Language
Display
Audio
Recording
Playback
See also Switching on and setting up on page 20.
Remote Control
Setup Navigator
So that each remote control operates only its own
recorder, make this setting different for each recorder
and remote in the room.
48
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
Disc settings
08
You can also undo the finalization of VR mode discs
which have been finalized on other DVD recorders. If
when you load a disc the message This disc cannot be
recorded. Undo the finalization is displayed, use this
command to be able to record on the disc using this
recorder.
Lock Disc
VR mode
Select Finalize, then Undo Finalize Start from the
finalize options screen.
• Default setting: Off
Disc
Basic
Lock Disc
Initialize
Finalize
Disc
Video settings
Video
Audio
Recording
Playback
Video Out
• Default setting: Interlace
You only need to make this setting if you connected this
recorder to your TV using the component video jacks.
Set to On to prevent accidental recording, editing or
erasing of the disc loaded. If you need to unlock the disc
to make edits, select Off.
Video
Basic
Video Out
Lock Disc
Disc
Input Adjust
Playback Adjust
Lock Disc
Off
Video
Audio
Recording
Playback
If your TV is compatible with progressive-scan
component video, set this Progressive for the highest
quality picture. If your TV is not compatible with
progressive-scan video, leave it set to Interlace.
Important
• A locked disc can still be initialized (which will
completely erase the disc).
Video Out
Component Video
Interlace
Initialize
See Initializing a DVD-RW disc on page 40 for detailed
instructions on this option.
Finalize
• See also Progressive scan video in the glossary on
page 64.
Finalizing ‘fixes’ the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
See Playing your recordings on other DVD players on
page 39 for detailed instructions.
Undo Finalize
You can undo the finalization on DVD-RW discs recorded
on this recorder in Video mode. You need to do this if you
want to record more material or edit material already on
the disc.
49
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
08
Playback Adjust
Important
Video
If you switch to Progressive when using a TV that is not
compatible with progressive-scan video, you will not be
able to see anything displayed on your TV. If this happens,
press and hold the + button on the front panel, then press
ꢂ STANDBY/ON. This will set the recorder’s video
output back to Interlace.
Basic
Video Out
Pure Cinema
Block NR
Disc
Input Adjust
Playback Adjust
Video
Mosquito NR
Black Level
Chroma Level
Audio
Recording
Playback
Compatibility of this unit with progressive-scan TVs
Consumers should note that not all high-definition television sets
are fully compatible with this product and may cause artifacts to
be displayed in the picture. In case of 525 progressive scan
picture problems, it is recommended that the user switch the
connection to the ‘standard definition’ output (Interlace). If there
are questions regarding our TV set compatibility with this model,
please contact our customer service center.
Use the various Playback Adjust settings to adjust the
picture quality of the video output.
From the Playback Adjust screen, use the ꢀ/ꢁ buttons
to select a setting, then use the ꢂ/ꢃ buttons to adjust
it.
This recorder is compatible with the following Pioneer displays
and monitors
Playback Adjust
Pure Cinema
Block NR
Off
Off
Off
Min
Min
On
Plasma display
Max
Max
Max
Max
• PDP-505HD, PDP-502MX, PDP-5030HD, PDP-4330HD, Pro-
1000HD, Pro-800HD, PDP-5031, PDP-4300, Pro-1000HDI, Pro-
800HDI, PDP-5040HD, PDP-4340HD, Pro-1110HD, Pro-910HD,
Pro-810HD, Pro-1010HD, Pro-920HD, Pro-1120HD, PDP-4345HD,
PDP-5045HD, PDP-4350HD, PDP-5050HD, PDP-4304, PDP-5004,
PDP-4300
Mosquito NR
Black Level
Chroma Level
• Pure Cinema – This setting optimizes the picture for
film material when the video output is set to
progressive scan. Usually it is best set to On, but try
switching it Off if the picture appears unnatural.
Projection monitor receiver
• Pro-700HD, Pro-710HD, Pro-610HD, Pro-510HD, Pro-720HD,
Pro-620HD, Pro-520HD, SD-641HD5, SD-582HD5, SD-532HD5,
SD-533HD5, SD-643HD5, Pro-730HD, Pro-630HD, Pro-530HD,
Pro-730HDI, Pro-530HDI, Pro-730HD, Pro-630HD, Pro-530HD
• Block NR – Adjusts the amount of noise reduction
applied to the block noise (artifacts visible in areas of
flat color, caused by MPEG compression).
Input Adjust
• Mosquito NR – Adjusts the amount of noise
reduction applied to the mosquito noise (artifacts
visible around the edge of an image, caused by
MPEG compression).
Video
Basic
Video Out
Disc
Input Adjust
Playback Adjust
• Black Level – Adjusts the intensity of black.
• Chroma Level – Adjusts how rich colors appear.
Press ENTER to exit the screen.
Video
Audio
Recording
Playback
Use this setting to adjust the brightness/color separation
of the video input.
Audio settings
From the Input Adjust screen, use the ꢂ/ꢃ buttons to
adjust the 3-D Y/C setting from Off to Max.
Audio Adjust setting
Input Adjust
Audio
3-D Y/C
Off
Max
Basic
Audio Adjust
Audio In
Disc
Video
Audio Out
Audio
Recording
Playback
Press ENTER to confirm and exit the screen.
Use the Audio Adjust setting to adjust the dynamic range
of the audio output when playing DVDs with Dolby Digital
sound.
50
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
08
From the Audio Adjust screen, use the ꢂ/ꢃ buttons to
adjust the Audio DRC setting On or Off. (Off leaves the
dynamic range untouched; On ‘squashes’ the dynamic
range, making it good for lower-level listening.)
Audio Out
Audio
Basic
Audio Adjust
Audio In
Dolby Digital
96kHz PCM
DTS
Disc
Audio Adjust
Video
Audio Out
Audio
Recording
Playback
MPEG
Audio DRC
Off
Use the various Audio Out settings to make sure that the
digital audio output is compatible with your AV receiver
(or other connected component). You may need to check
the operating instructions that came with your AV
receiver to see which digital formats it’s compatible with.
Press ENTER to confirm and exit the screen.
From the Audio Out screen, use the ꢀ/ꢁ buttons to
select a setting, then use the ꢂ/ꢃ buttons to adjust it.
Audio In
Audio
Audio Out
Basic
Audio Adjust
Audio In
External Audio
Dual Mono
Disc
Dolby Digital
96kHz PCM
DTS
Dolby Digital
96kHz -> 48kHz
On
Video
Audio Out
Input Level
Audio
Recording
Playback
MPEG
MPEG -> PCM
Use the Audio In settings to specify which channel(s) of
a dual mono source to record and adjust the analog
audio input level.
• Dolby Digital – If your AV receiver, etc. is Dolby
Digital compatible, set to Dolby Digital, otherwise
set to Dolby Digital -> PCM.
From the Audio In screen, use the ꢀ/ꢁ buttons to select
a setting, then use the ꢂ/ꢃ buttons to adjust it.
• 96 kHz PCM – If your AV receiver, etc. is compatible
with high sampling rate audio (88.2 / 96 kHz), set to
96kHz, otherwise set to 96kHz -> 48kHz.
Audio In
External Audio
Dual Mono Rec
Input Level
Stereo
L
• DTS – If your AV receiver, etc. has a built-in DTS
decoder, set to On, otherwise set to Off. (See also
Important below.)
0dB
• MPEG – If your AV receiver, etc. is MPEG audio
compatible, set to MPEG, otherwise set to MPEG ->
PCM.
• External Audio – Select Stereo if the external audio
input is regular stereo, or Dual Mono if each channel
carries a separate soundtrack.
Important
• If you set DTS to On with a non-DTS compatible
amplifier, noise will be output when you play a DTS
disc.
• Dual Mono Rec – When recording a dual mono
source from an external input in Video mode or VR
mode set to XP, you can choose to record the L (left),
or the R (right) audio channel.
• When set to On, there is no analog audio output
when playing a DTS DVD-Video disc.
• Input Level – Use to attenuate the analog audio
input level. (External input only)
• When playing a DTS audio CD (even when DTS is
Off), noise is output from the analog outputs. Do not
play this through your amplifier and speakers.
Note
• When playing a DTS audio CD, make sure that
Stereo is selected using the AUDIO button. See
Switching DVD soundtracks on page 31.
• Except in XP recording mode, if you’re recording in
VR mode, both channels will be recorded and you
can switch them as you like on playback.
51
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
Recording settings
08
On the default setting, a new chapter is started
approximately every 15 minutes when recording in Video
mode.
Auto Chapter
Optimized Rec
• Default setting: Off
Auto Chapter
On
Recording
Basic
Optimized Rec
Auto Chapter
Disc
Video
DVD-RW Auto Init
Audio
Recording
Playback
DVD-RW Auto Init.
• Default setting: VR Mode
On the default setting, if a timer program (Standard or
VCR Plus+ programming system) is set but there isn’t
enough space on the disc at the recording quality set, the
recording will start, but it will be cut off when the disc is
full.
Recording
Basic
Optimized Rec
Auto Chapter
Disc
Video
DVD-RW Auto Init
Audio
Recording
Playback
Set Optimized Rec to On to have the recorder
automatically adjust the recording quality to fit the
available disc space.
When you load a new, blank DVD-RW disc the recorder
automatically initializes it for recording. You can set it to
initialize the disc for VR mode or Video mode recording.
Optimized Rec
Optimized Rec
Off
DVD-RW Auto Init
DVD-RW Auto Init
VR Mode
Note
• The quality of recordings may be reduced if a longer
recording time is used.
• If, even on recording level SEP, there is insufficient
space available on the disc, the recording is made on
SEP but recording will stop once the disc is full.
Playback settings
• Optimized Recording only compensates for the first
(earliest starting) timer program if more than one has
been set.
Parental Lock
Some DVD-Video discs feature a Parental Lock level. If
the recorder is set to a lower level than the disc, it will
require you to enter a password before the disc will play.
This gives you some control about what your children
watch on your DVD recorder.
Auto Chapter
• Default setting: On
Some discs also support the Country/Area code feature.
The recorder does not play certain scenes on these discs
depending on the Country/Area code you set.
Recording
Basic
Optimized Rec
Auto Chapter
Disc
Before you can set the Parental Lock level or the Country/
Area code you must set a password. As the password
owner you can change the Parental Lock level or Country/
Area code whenever you like. You can also change the
password.
Video
DVD-RW Auto Init
Audio
Recording
Playback
52
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
08
2
Use the number buttons to enter your existing
Note
password.
• Not all discs that you may consider inappropriate for
your children use the Parental Lock feature. These
discs will always play without requiring the password
first.
Change Password
Change Password
Change Level
Current Password
New Password
1
-
2
-
3
-
4
-
Country / Area
• If you forget the password, you can reset the recorder
to its factory settings (see Resetting the recorder on
page 63), then set a new password.
Set Password
• Default password: none
3
4
Press ENTER.
Enter a new password.
The password you set will enable you to change the
Parental Lock level and Country/Area code setting. It is
also the password that you will need to enter if you want
to play a disc with a parental lock level higher than the
recorder.
Change Password
Change Password
Change Level
Current Password
1
5
2
6
3
7
4
8
New Password
Country / Area
1
Select ‘Set Password’.
Parental Look
Set Password
Change Level
Country / Area
Set Password
5
Press ENTER.
Change Level
• Default level: Off
1
Select ‘Level’.
2
Use the number buttons to input a four-digit
Parental Look
password.
Change Password
Change Level
Password
Level
Set Password
Country / Area
Set Password
Change Level
Country / Area
Set Password
1
2
3
4
2
Use number buttons to enter your password,
then press ENTER.
3
Press ENTER to set the password.
Change Level
Change Password
Change Level
Password
Level
1
2
3
4
Change Password
Off
To change your password, confirm your existing
password then enter a new one.
Country / Area
1
Select ‘Change Password’.
Parental Look
3
Use the ꢂ/ꢃ buttons to select a new parental
Change Password
Change Level
Current Password
New Password
lock level.
Country / Area
Change Level
Change Password
Change Level
Password
Level
1
2
3
4
Off
Country / Area
53
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
08
4
Press ENTER to set the new Parental Lock level.
Note
• Changing the Country/Area code does not take effect
until the next disc is loaded (or the current disc is
reloaded).
Country/Area
• Default Country/Area code: us (2119)
1
Select ‘Country / Area’.
Language
Parental Look
Change Password
Change Level
Password
Code
Playback
Basic
Parental Look
Language
Visual
Audio
Country / Area
Number
Disc
Subtitle
Video
DVD Menu
Subtitle Display
Audio
Recording
Playback
Action
2
Use number buttons to enter your password,
then press ENTER.
Use the various Language settings to set the default
audio, subtitle and menu languages for DVD discs, as
well as subtitle display behavior.
Country / Area
Change Password
Password
1
2
3
1
4
9
Change Level
Code
us
From the Language screen, use the ꢀ/ꢁ buttons to
select a setting, then use the ꢂ/ꢃ buttons to adjust it.
If you want to choose a language other than English,
French or Spanish for audio, subtitles and menus, select
Other then select another language (see Selecting
‘Other’ languages below).
Number
Country / Area
2
1
3
Select a Country/Area code.
• You may also want to refer to the Country/Area code
Language
list on page 60.
Audio
English
English
English
On
There are two ways you can set the Country/Area code:.
Subtitle
DVD Menu
Subtitle Display
• Select by code letter: Use the ꢂ/ꢃ buttons to
change the code.
Country / Area
Change Password
Change Level
Password
Code
1
2
2
1
3
1
4
9
• Audio – This setting is your preferred audio language
for DVD discs. If the language you specify here is
recorded on a disc, the recorder automatically plays
the disc in that language.
us
Country / Area
Number
• Subtitle – This setting is your preferred subtitle
language for DVD discs. If the language you specify
here is recorded on a disc, the recorder automatically
plays the disc with those subtitles.
• Select by code number: Press ꢁ then use the
number buttons to enter the four-digit Country/Area
code (you can find the Country/Area code list on
page 60.)
• DVD Menu – Some multilingual discs have disc
menus in several languages. This setting specifies in
which language the disc menus should appear.
Leave on the default setting (w/Subtitle Language)
for menus to appear in the same language as your
Subtitle language.
Country / Area
Change Password
Change Level
Password
Code
1
2
2
1
3
1
4
9
us
Country / Area
Number
• Subtitle Display – When set to On, the recorder
displays subtitles according to the Subtitle setting.
Set to Off to switch subtitles off altogether (although
you may find that some discs override this setting).
4
Press ENTER to set the new Country/Area code.
54
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
08
• TV Screen Size – If you have a widescreen TV, select
the 16:9 setting—widescreen DVD software is then
shown using the full screen area. When playing
software recorded in conventional (4:3) format, the
settings on your TV will determine how the material is
presented—see the manual that came with your TV
for details on what options are available.
Tip
• You can switch between the audio and subtitle
languages recorded on a DVD disc any time during
playback using the AUDIO and SUBTITLE buttons.
(This does not affect these settings.)
If you have a conventional TV, choose either 4:3
(Letter Box) or 4:3 (Pan & Scan). In Letter Box mode,
widescreen software is shown with black bars at the
top and bottom of the screen. Pan & Scan chops the
sides off widescreen material to make it fit the 4:3
screen (so even though the picture looks larger on
the screen, you’re actually seeing less of the movie).
See Screen sizes and disc formats on page 56 for
more information.
Selecting ‘Other’ languages
1
Select ‘Other’ from the language list.
This option appears in the settings for DVD Menu
Language, Audio Language, and Subtitle Language.
2
Select the language you want.
Language
Audio
English
English
Other
On
Subtitle
• Still Picture – The recorder uses one of two
processes when displaying a still frame from a DVD
disc. The default Auto setting automatically chooses
the best setting each time.
DVD Menu
Subtitle Display
Language
Number
English
0
5
1
4
The Frame setting produces a sharper image, but
more prone to shake than field stills.
• Select by language name: Use the ꢂ/ꢃ buttons to
change the language.
Action settings
• Select by code number: Press ꢁ then use the
number buttons to enter the four-digit language
code.
Playback
Basic
Parental Look
Language
Visual
PBC Mode
See Language code list on page 60 for a list of available
Disc
Title Continue
languages and corresponding codes.
Video
Audio
Recording
Playback
Action
3
Press ENTER to confirm and exit the screen.
Visual settings
Use the Action settings to specify Video CD playback and
DVD title playback behavior.
Playback
Basic
Parental Look
Language
Visual
TV Screen Size
Still Picture
From the Action screen, use the ꢀ/ꢁ buttons to select a
setting, then use the ꢂ/ꢃ buttons to adjust it.
Disc
Video
Audio
Recording
Playback
Action
Action
PBC Mode
On
On
Title Continue
Use the Visual settings to specify the kind of TV you have
and how still frames should appear when you pause
playback of a disc.
From the Visual screen, use the ꢀ/ꢁ buttons to select a
setting, then use the ꢂ/ꢃ buttons to adjust it.
• PBC Mode – Set to On to have the recorder
automatically start playing Video CDs in playback
control (PBC) mode, if possible. Set to Off if you
prefer to use ‘manual’ playback.
Visual
TV Screen Size
Still Picture
4:3 (Letter Box)
Auto
• Title Continue – (VR mode only) Set to On to have
the recorder start playing the following title
immediately after the previous one ends. When set to
Off, when a title finishes the disc menu is displayed.
55
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
09
Chapter 9
Additional information
Screen sizes and disc formats
When viewing on a standard TV or monitor
Screen format of disc Setting
16:9 4:3 (Letter Box)
Appearance
The program is shown in
widescreen with black bars at
the top and bottom of the
screen.
4:3 (Pan & Scan)
The sides of the program are
cropped so that the picture
fills the whole screen.
4:3
16:9
The program appears
squashed. Set to either 4:3
(Letter Box) or 4:3 (Pan &
Scan).
4:3 (Letter Box)
4:3 (Pan & Scan)
The program is presented
correctly on either setting.
When viewing on a widescreen TV or monitor
Screen format of disc Setting
Appearance
16:9
16:9
The program is presented in
widescreen.
4:3
16:9
Your TV will determine how the
picture is presented—check
the manual that came with the
TV for details.
56
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Troubleshooting
09
Incorrect operation is often mistaken for trouble and malfunction. If you think there is something wrong with this
component, please check the points below. Sometimes the trouble may lie in another component. Investigate the
other components and electrical appliances being used. If the trouble cannot be rectified even after checking the
points below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
General
Problem
Remedy
The disc is automatically ejected
after closing the disc tray
• Check that the disc is not a DVD-RAM, DVD+R/RW, dual disc (DVD/CD hybrid
disc) or other incompatible format disc (page 8).
• Check that the disc is loaded properly (aligned in disc tray and label-side up).
• Take out the disc and clean it (page 62).
• Check that the disc has a region code compatible with the recorder (page 64).
No picture
• Check that everything is connected properly (page 10).
• Check that the connected TV and/or the AV amp/receiver is set to the correct
input.
• Make sure that the disc is NTSC format.
• The recorder may be set to progressive-scan with an incompatible TV. Reset to
interlace by pressing and holding the + button (front panel) then pressing ꢂ
STANDBY/ON (front panel).
Can’t play a disc
• Check that the disc is not a DVD-RAM, DVD+R/RW, dual disc (DVD/CD hybrid
disc) or other incompatible format disc (page 8).
• Take out the disc and clean it (page 62).
• Check that the disc is loaded properly (aligned in disc tray and label-side up).
• There may be condensation in the recorder. Leave the recorder for an hour or so
for the condensation to evaporate.
All settings are reset
• If the recorder is unplugged (or there is a power failure) while the recorder is on,
all the settings will be lost.
• Make sure that you switch the recorder into standby before unplugging the
power cord.
Screen goes blank and controls are • Press ꢃ then restart playback.
inoperative
Remote control does not work
• Set the remote control to the same ID number as the recorder (page 48). (When
the batteries run down, the remote mode is automatically reset to 1.)
• Use the remote within its operating range (page 8).
• Replace the batteries (page 8).
No sound or sound is distorted
• Make sure that the amp/receiver or TV is set to the correct input and the volume
turned up.
• There is no sound when the picture is paused, or during scanning (even forwards
at regular play speed) or slow motion play. Press ꢄ to resume regular playback.
• DTS discs can only be played if this recorder is connected to a DTS decoder or
DTS compatible amp/receiver. If you have connected a suitable decoder, also
make sure that the Initial Setup > Audio > Audio Out > DTS setting is On.
• Some 96kHz discs do not output audio through the digital jack. In this case,
switch the input of your amp/receiver to analog.
• Check the audio cable connections (page 10).
• If the sound is distorted, try cleaning the cable plugs.
The picture from the external input • If the video signal from the external component is copy-protected, you cannot
is distorted
connect via this recorder. Connect the component directly to your TV.
57
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
09
Problem
Remedy
Screen is stretched vertically or hori-
zontally
• Make sure that the TV Screen Size setting (page 55) is correct for the kind of TV
you have (see also page 56).
• If you have a widescreen TV, check its aspect ratio settings.
• This recorder’s input switches into wide mode automatically according to the
input signal. When the unit connected is not compatible with ID-1, set the
connected component to output 4:3 aspect ratio (standard) video.
Can’t play a disc recorded using this • If the disc was recorded in Video mode, make sure that it’s finalized (page 39).
recorder on another player
•Some players will not play recordable DVD discs, even when recorded in Video
mode and finalized.
• If the disc was recorded in VR mode, the other player must be specifically RW
compatible in order to play it (page 8).
• discs recorded with copy-once material cannot be played on non-CPRM
compatible players (page 34).
During playback the picture is dark • When a copy-protected disc is played via a VCR, the picture will not display
or distorted correctly. Connect the recorder directly to your TV.
Can’t record or does not record suc- • Check that there is some remaining blank space on the DVD.
cessfully
• Check that the disc isn’t already finalized.
• A DVD disc may contain up to 99 (Original) titles and 999 chapters. Check that
these limits have not been reached.
• Check that the source you are trying to record is not copy protected.
• For a VR formatted disc, check that the disc isn’t locked (page 48).
• The power may have failed during recording.
Timer program doesn’t record suc- • When setting the recording channel, make sure you set the recorder’s built-in TV
cessfully
tuner, not the TV’s built-in tuner.
• When recording to a Video mode disc, programs that are copy-once protected
cannot be recorded. Use a VR mode formatted disc for copy-once material
(page 34).
• Two timer programs may have overlapped, in which case only the earlier one will
record completely.
• The power may have failed during recording.
After briefly unplugging or after a • Reset the clock and other recorder settings to use the recorder again.
power failure the front panel dis-
play shows ‘--:--’
Front panel display shows ‘LOCK’
when a button is pressed
• The Child Lock is on; turn off in order to use the recorder (page 38).
The picture freezes and the front
panel and remote control buttons
stop working
• Press the front panel ꢂ STANDBY/ON button to switch the power off, then
switch back on and restart playback. If the power fails to switch off, press and hold
ꢂ STANDBY/ON for 10 seconds until the power switches off.
• If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the outlet
and insert again to return to normal operating conditions.
58
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
09
• I changed the batteries in the remote control and now
it doesn’t work!
Frequently asked questions
Most likely the remote control ID does not match the
recorder. After changing the batteries, the remote ID
is reset to 1; if the recorder is set to something else,
the remote will not work with it.
In this section you can find answers to frequently asked
questions on how to use your DVD recorder and what it
can do.
• What kind of discs can I use for recording?
See Remote Control on page 48 for how to set the ID
of the recorder and the remote.
You can use DVD-R and DVD-RW discs for recording.
DVD-RAM, CD-R and CD-RW discs are not
recordable using this recorder.
See General disc compatibility on page 8 for more
details.
• Can I watch recordings made using this recorder on
other DVD players?
Yes. Use a DVD-R disc for you recordings (these are
always recorded in Video mode). After recording,
finalize the disc to make it playable on other DVD
players (note that you cannot make further
recordings on the disc after finalizing it).
If you want to use a DVD-RW disc, make sure that it’s
initialized for recording in Video mode. As with a
DVD-R, finalize the disc after recording to make it
playable in other players.
See also Playing your recordings on other DVD players
on page 39.
• Can I edit recordings, or erase parts of recordings from
a disc?
Yes. Recording to a VR mode DVD-RW disc gives you
the most flexibility when editing. By default, when you
load a new DVD-RW disc into the recorder it is
initialized for recording in VR mode.
See also Editing on page 41.
• Can I play a VR mode DVD-RW disc in another DVD
player?
Look for the ‘RW Compatible’ mark on the other DVD
player to see if it will play VR mode DVD-RW discs. If
the player does not recognize the disc when you load
it, try finalizing it in the recorder, then try again.
See also Playing your recordings on other DVD players
on page 39.
• Can I record a copy-once protected program from a
subscription satellite or cable channel?
Yes, but you’ll need to use a CPRM-compatible DVD-
RW disc initialized for VR mode recording. (Look on
the disc package to see if it is CPRM compatible.)
See also CPRM on page 34.
59
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
09
Language code list
Language (Language code letter), Language code
Japanese (ja), 1001
English (en), 0514
French (fr), 0618
German (de), 0405
Italian (it), 0920
Spanish (es), 0519
Chinese (zh), 2608
Dutch (nl), 1412
Portuguese (pt), 1620
Swedish (sv), 1922
Russian (ru), 1821
Korean (ko), 1115
Greek (el), 0512
Bhutani (dz), 0426
Esperanto (eo), 0515
Estonian (et), 0520
Basque (eu), 0521
Persian (fa), 0601
Finnish (fi), 0609
Fiji (fj), 0610
Faroese (fo), 0615
Frisian (fy), 0625
Kirghiz (ky), 1125
Latin (la), 1201
Lingala (ln), 1214
Sinhalese (si), 1909
Slovak (sk), 1911
Slovenian (sl), 1912
Samoan (sm), 1913
Shona (sn), 1914
Somali (so), 1915
Albanian (sq), 1917
Serbian (sr), 1918
Siswati (ss), 1919
Sesotho (st), 1920
Sundanese (su), 1921
Swahili (sw), 1923
Tamil (ta), 2001
Laothian (lo), 1215
Lithuanian (lt), 1220
Latvian (lv), 1222
Malagasy (mg), 1307
Maori (mi), 1309
Macedonian (mk), 1311
Malayalam (ml), 1312
Mongolian (mn), 1314
Moldavian (mo), 1315
Marathi (mr), 1318
Malay (ms), 1319
Maltese (mt), 1320
Burmese (my), 1325
Nauru (na), 1401
Irish (ga), 0701
Scots-Gaelic (gd), 0704
Galician (gl), 0712
Guarani (gn), 0714
Gujarati (gu), 0721
Hausa (ha), 0801
Hindi (hi), 0809
Croatian (hr), 0818
Hungarian (hu), 0821
Armenian (hy), 0825
Interlingua (ia), 0901
Interlingue (ie), 0905
Inupiak (ik), 0911
Indonesian (in), 0914
Icelandic (is), 0919
Hebrew (iw), 0923
Yiddish (ji), 1009
Javanese (jw), 1023
Georgian (ka), 1101
Kazakh (kk), 1111
Greenlandic (kl), 1112
Cambodian (km), 1113
Kannada (kn), 1114
Kashmiri (ks), 1119
Kurdish (ku), 1121
Telugu (te), 2005
Tajik (tg), 2007
Thai (th), 2008
Afar (aa), 0101
Abkhazian (ab), 0102
Afrikaans (af), 0106
Amharic (am), 0113
Arabic (ar), 0118
Assamese (as), 0119
Aymara (ay), 0125
Azerbaijani (az), 0126
Bashkir (ba), 0201
Byelorussian (be), 0205
Bulgarian (bg), 0207
Bihari (bh), 0208
Bislama (bi), 0209
Bengali (bn), 0214
Tibetan (bo), 0215
Breton (br), 0218
Catalan (ca), 0301
Corsican (co), 0315
Czech (cs), 0319
Tigrinya (ti), 2009
Turkmen (tk), 2011
Tagalog (tl), 2012
Setswana (tn), 2014
Tonga (to), 2015
Turkish (tr), 2018
Tsonga (ts), 2019
Tatar (tt), 2020
Twi (tw), 2023
Ukrainian (uk), 2111
Urdu (ur), 2118
Uzbek (uz), 2126
Vietnamese (vi), 2209
Volapük (vo), 2215
Wolof (wo), 2315
Xhosa (xh), 2408
Yoruba (yo), 2515
Zulu (zu), 2621
Nepali (ne), 1405
Norwegian (no), 1415
Occitan (oc), 1503
Oromo (om), 1513
Oriya (or), 1518
Panjabi (pa), 1601
Polish (pl), 1612
Pashto, Pushto (ps), 1619
Quechua (qu), 1721
Rhaeto-Romance (rm), 1813
Kirundi (rn), 1814
Romanian (ro), 1815
Kinyarwanda (rw), 1823
Sanskrit (sa), 1901
Sindhi (sd), 1904
Sangho (sg), 1907
Serbo-Croatian (sh), 1908
Welsh (cy), 0325
Danish (da), 0401
Country/Area code list
Country/Area, Country/Area code, Country/Area code letter
Argentina, 0118, ar
Australia, 0121, au
Austria, 0120, at
Belgium, 0205, be
Brazil, 0218, br
Canada, 0301, ca
Chile, 0312, cl
Finland, 0609, fi
France, 0618, fr
Germany, 0405, de
Hong Kong, 0811, hk
India, 0914, in
Indonesia, 0904, id
Italy, 0920, it
Japan, 1016, jp
Malaysia, 1325, my
Mexico, 1324, mx
Netherlands, 1412, nl
New Zealand, 1426, nz
Norway, 1415, no
Pakistan, 1611, pk
Philippines, 1608, ph
Portugal, 1620, pt
Singapore, 1907, sg
Spain, 0519, es
Sweden, 1905, se
Switzerland, 0308, ch
Taiwan, 2023, tw
Thailand, 2008, th
United Kingdom, 0702, gb
USA, 2119, us
China, 0314, cn
Denmark, 0411, dk
Russian Federation, 1821, ru
Korea, Republic of, 1118, kr
60
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
09
On-screen displays and recorder displays
The table below shows a list of error messages that you may encounter when using the recorder and an explanation
of their meaning.
Message
Explanation/Action
• Initializing disc. Please wait a moment.
When you load a blank DVD-RW disc, the recorder automatically
initializes it.
• Incompatible region number.
The disc loaded has an incompatible region number for the
recorder and so will not play.
• Cannot record any more titles.
• No more space for file management data.
• Cannot add any more chapter marks.
The disc control data limit has been reached, or the maximum
number of chapters and/or titles has been reached. Erase titles/
chapters or combine chapters.
• This disc cannot be recorded. Undo the final-
ization.
The disc was finalized on a non-Pioneer DVD recorder. Undo the
finalization in order to recording/editing.
• Cannot play this disc.
• This disc cannot be recorded.
• Cannot read the CPRM information.
• Could not record the information to the disc.
• Cannot edit.
The disc may be dirty or damaged. Take out the disc, clean it and
retry. If the error persists, use a new disc. If the error appears even
with a new disc, please consult a Pioneer Service Center.
• Could not initialize disc.
• Could not complete finalization successfully.
• Could not undo finalization successfully.
• Could not successfully unlock the disc.
• Incompatible or unreadable disc.
The disc loaded is a DVD-RAM, DVD+R/RW or some other
incompatible disc type. This display may also appear if the disc is
dirty or damaged.
• Cannot record to a disc that is not CPRM com-
patible.
The video source is copy-once protected. Use a VR mode DVD-RW
disc with CPRM for recording.
• Cannot record this content using Video mode
recording.
• This content is copy protected.
• Incorrect CPRM information.
The video source is copy-protected and cannot be recorded.
The recorder could not read the CPRM information. The recorder
may be damaged—please consult a Pioneer Service Center.
• The audio will conform to the [Dual Mono
Recording] setting.
When recording from an external input in Video mode, or in VR
mode set to XP, audio is recorded in Linear PCM format. You can
only record the left or right channel; not both.
• Operation stopped due to power failure.
If during recording the power plug is disconnected from the power
outlet, this message will be displayed the next time the recorder is
switched on. In this case, the recording will not be recoverable.
• Repairing disc.
This message is displayed when, due to damage or recording
conditions, the recorder attempts to repair a disc.
• Could not repair the disc.
The recorder was unable to repair the disc.
• Overheating has stopped operation.
Press DISPLAY to clear this message.
The internal temperature of the recorder has exceeded the
operating limit. If this message reappears, please contact a
Pioneer authorized service center.
61
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Handling discs
09
This recorder is designed for use with conventional, fully
circular discs only. Use of shaped discs is not
recommended for this product. Pioneer disclaims all
liability arising in connection with the use of shaped
discs.
When holding discs of any type, take care not to leave
fingerprints, dirt or scratches on the disc surface. Hold
the disc by its edge or by the center hole and edge.
Damaged or dirty discs can affect playback and
recording performance. Take care also not to scratch the
label side of the disc. Although not as fragile as the
recorded side, scratches can still result in a disc
becoming unusable.
Should a disc become marked with fingerprints, dust,
etc., clean using a soft, dry cloth, wiping the disc lightly
from the center to the outside edge as shown in the
diagram below.
Cleaning the pickup lens
The DVD recorder’s lens should not become dirty in
normal use, but if for some reason it should malfunction
due to dust or dirt, consult your nearest Pioneer-
authorized service center. Although lens cleaners for CD
players are commercially available, we do not
recommend using them since some may damage the
lens.
If necessary, use a cloth soaked in alcohol, or a
commercially available CD/DVD cleaning kit to clean a
disc more thoroughly. Never use benzine, thinner or
other cleaning agents, including products designed for
cleaning vinyl records.
Condensation
Storing discs
Condensation may form inside the recorder if it is
brought into a warm room from outside, or if the
temperature of the room rises quickly. Although the
condensation won’t damage the recorder, it may
temporarily impair its performance. For this reason you
should leave it to adjust to the warmer temperature for
about an hour before switching on and using.
Although CDs and DVD discs are more durable than vinyl
records, you should still take care to handle and store
discs correctly. When you're not using a disc, return it to
its case and store upright. Avoid leaving discs in
excessively cold, humid, or hot environments (including
under direct sunlight).
Don't glue paper or put stickers onto the disc, or use a
pencil, ball-point pen or other sharp-tipped writing
instrument. These could all damage the disc.
Hints on installation
We want you to enjoy using this unit for years to come, so
please bear in mind the following points when choosing
a suitable location for it:
For more detailed care information see the instructions
that come with discs.
do...
ꢅ
Use in a well-ventilated room.
Do not load more than one disc into the recorder.
ꢅ
Place on a solid, flat, level surface, such as a table,
shelf or stereo rack.
Damaged discs
don’t...
ꢆ
Use in a place exposed to high temperatures or
Discs spin at high speed inside the recorder. If you can
see that a disc is cracked, chipped, warped, or otherwise
damaged, don't risk using it; you could end up damaging
the recorder.
humidity, including near radiators and other heat-
generating appliances.
ꢆ
Place on a window sill or other place where the
recorder will be exposed to direct sunlight.
Use in a dusty or damp environment or in a room
where it will be exposed to excessive cigarette smoke.
ꢆ
62
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
09
ꢆ
Place directly on top of an amplifier, or other
3
Program the IR controller supplied with your STB
component in your stereo system that becomes hot in
use.
to send start/stop recording codes for a Pioneer VCR.
See the manual that came with the STB for how to do
this.
ꢆ
Use near a television or monitor as you may
experience interference—especially if the television uses
an indoor antenna.
Only the REC and STOP codes have any effect when used
with this recorder:
ꢆ
Use in a kitchen or other room where the recorder
may be exposed to smoke or steam.
Use on a thick rug or carpet, or cover with cloth—this
may prevent proper cooling of the unit.
Place on an unstable surface, or one that is not large
• REC – Start recording
• STOP – Stop recording
ꢆ
4
Position the IR controller so that it will control
this recorder.
The IR sensor on the recorder is located just above the ꢏ
mark on the front panel.
ꢆ
enough to support all four of the unit’s feet.
Making a timer recording
Moving the recorder
1
Set the timer on the STB.
If you need to move the recorder, first remove the disc, if
there’s one loaded, and close the disc tray. Next, press ꢂ
STANDBY/ON to switch the power to standby, checking
that the OFF indication in the display goes off. Lastly,
disconnect the power cord. Never lift or move the unit
during playback or recording—discs rotate at a high
speed and may be damaged.
See the manual that came with your STB for how to do
this.
2
Switch on this recorder.
You must leave the recorder on until the recording
finishes.
• At the programmed times, the STB will start and stop
recording on this recorder.
Resetting the recorder
If you need to, you can reset the recorder to all its factory
settings.
Glossary
1
Make sure that the recorder is on.
Analog audio
2
Press and hold ꢃ STOP and press ꢂ STANDBY/
An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See
also digital audio.
ON.
The recorder turns off with all settings reset.
Additional information for cable/
satellite/STB (set-top box) users
Aspect ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the screen is
almost square); widescreen models are 16:9 (the screen
is almost twice as wide as it is high).
The following instructions show how to use the timer
features of your STB with this recorder.
Setting up
Chapter
Just as a book is split up into several chapters, a title on
a DVD disc is usually divided into chapters. See also Title.
1
Connect the STB’s audio/video outputs to a set of
audio/video inputs on this recorder.
2
Switch on both the STB and this recorder and
Digital audio
switch the recorder’s input function to the STB (L1 or
L2).
To check that everything is connected properly, switch on
your TV and select this recorder as the video input. You
should see whatever the STB is tuned to.
An indirect representation of sound by numbers. during
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-to-
digital converter, generating a stream of numbers. On
playback, a digital-to-analog converter generates an
analog signal based on these numbers. See also
Sampling frequency and Analog audio.
63
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
09
Dolby Digital
PBC (PlayBack Control) (Video CD only)
A system of navigating a Video CD through on-screen
menus recorded onto the disc. Especially good for discs
that you would normally not watch from beginning to end
all at once—karaoke discs, for example.
Dolby® Digital Recording enables consumers to record
high-quality video with stereo sound on recordable DVD
Progressive scan video
Also called non-interlaced video, this method of
displaying a picture updates all the lines in one pass,
resulting in a more stable, flicker-free image than
interlaced video (for a given scanning rate).
discs. The technology, when utilized instead of PCM
recording, also saves recordable disc space, allowing for
higher video resolution or extended recording time on
each DVD. DVDs created using Dolby Digital Recording
will play back on all DVD-Video players.
PureCinema
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-d symbol are trademarks of Dolby
Laboratories.
Video on a DVD disc may be either video material
(originally shot on video) or film material (originally shot
on film). Video material has a frame rate of 30 frames/
second, compared to 24 frames/second for film. This
recorder converts film material to 60 frames/second (in
progressive scan mode). PureCinema adjusts the picture
so that it matches more closely the picture quality of a
cinema screen.
DTS
DTS stands for Digital Theater System. DTS is a surround
system different from Dolby Digital that has become a
popular surround sound format for movies.
Regions (DVD only)
ALL
1
“DTS” and “DTS digital Out” are registered trademarks of
digital Theater Systems, Inc.
(example region code marks)
Regions associate discs and players with particular
areas of the world. This unit will only play discs that have
compatible region codes. You can find the region code of
your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Dynamic range
The difference between the quietest and loudest sounds
possible in an audio signal (without distorting or getting
lost in noise). Dolby Digital and DTS soundtracks are
capable of a wide dynamic range, delivering dramatic
cinema-like effects.
Sampling frequency
The rate at which sound is measured to be turned into
digital audio data. The higher the rate, the better the
sound quality, but the more digital information is
generated. Standard CD audio has a sampling frequency
of 44.1kHz, which means 44,100 samples
MPEG audio
(measurements) per second. See also Digital audio.
An audio format used on Video CDs and some DVD
discs. This unit can convert MPEG audio to PCM format
for wider compatibility with digital recorders and AV
amp/receivers. See also PCM.
Title
A collection of chapters on a DVD disc. See also Chapter.
MPEG video
Track
The video format used for Video CDs and DVDs. Video CD
uses the older MPEG-1 standard, while DVD uses the
newer and much better quality MPEG-2 standard.
Audio CDs and Video CDs use tracks to divide up the
content of a disc. The DVD equivalent is called a chapter.
See also Chapter.
PCM (Pulse Code Modulation)
The most common system of encoding digital audio,
found on CDs and DAT. Excellent quality, but requires a
lot of data compared to formats such as Dolby Digital
and MPEG audio. For compatibility with digital audio
recorders (CD, MD and DAT) and AV amp/receivers with
digital inputs, this unit can convert Dolby Digital and
MPEG audio to PCM. See also Digital audio.
64
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Specifications
09
Input/Output
VHF/UHF antenna input/output terminal . . . . VHF/UHF set
75 Ω (F-shape connector)
Video input . . . . . . . . . . . . . . . . . . . . . Input 1 (rear), 2 (front)
Input level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p (75 Ω)
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jack
Video output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Output 1
Output level. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p (75 Ω)
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jack
S-Video input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Input 1
Y (luminance) - Input level . . . . . . . . . . . . . . . . 1 Vp-p (75 Ω)
C (color) - Input level . . . . . . . . . . . . . . . . 286 mVp-p (75 Ω)
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 pin mini DIN
S-Video output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Output 1
Y (luminance) - Output level . . . . . . . . . . . . . . 1 Vp-p (75 Ω)
C (color) - Output level . . . . . . . . . . . . . . . 286 mVp-p (75 Ω)
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 pin mini DIN
Component video output
General
System . . . . . . . . . . . . . . . . . . . . . . . DVD-Video,DVD-R/RW,
Video-CD,CD,
CD-R/RW (CD-DA)
Power requirements. . . . . . . . . . . . . . . . . . . . . . 120 V, 60 Hz
Power Consumption. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 W
Power consumption in standby mode . . . . . . . . . . . .0.38 W
(Front panel display: off)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 lb. 4 oz. / 3.3 kg
Dimensions . . . . . 16 9/16 (W) x 2 11/16 (H) x 13 1/16 (D) in.
420 (W) x 69 (H) x 332 (D) mm
Operating temperature . . . . . . . . . . . . . . . . .+5°C to +35°C
Operating humidity . . . . . . . . . . . . . . . . . . . . . . . .5% to 85%
(no condensation)
Output level. . . . . . . . . . . . . . . . . . . . . . . . Y: 1.0 Vp-p (75 Ω)
PB, PR: 0.7 Vp-p (75 Ω)
TV format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NTSC
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jacks
Audio input. . . . . . . . . . . . . . . . . .Input 1 (rear), 2 (front) L/R
Input level
during audio input . . . . . . . . . . . . . . . . . . . . . . . . . . . 2V rms
(Input impedance: more than 22 kΩ)
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jacks
Audio output . . . . . . . . . . . . . . . . . . . . . . . . . . . Output 1 L/R
during audio output . . . . . . . . . . . . . . . . . . . . . . . . . . 2V rms
(Output impedance: less than 1.5 kΩ)
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jacks
Digital Audio output . . . . . . . . . . . . Coaxial digital output 1
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jack
Recording
Recording format . . . . . . . . . . . . . . . . DVD Video Recording
DVD-VIDEO
Recordable discs
DVD-RW (DVD Re-recordable disc)
DVD-R (DVD Recordable disc)
Video recording format
Sampling frequency . . . . . . . . . . . . . . . . . . . . . . . . . 13.5MHz
Compression format. . . . . . . . . . . . . . . . . . . . . . . . . . . MPEG
Audio recording format
Sampling frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . 48kHz
Compression format. . . . . . . . .Dolby Digital or Linear PCM
(uncompressed)
Supplied accessories
Recording time
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
dry cell batteries (AA/R6P) . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Audio / Video cable (red/white/yellow) . . . . . . . . . . . . . . . . 1
RF antenna cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Blank DVD-RW disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick start guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Operating Instructions
XP (XP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Approx. 1 hour
Standard Play (SP) . . . . . . . . . . . . . . . . . . . . Approx. 2 hours
Long Play (LP) . . . . . . . . . . . . . . . . . . . . . . . . Approx. 4 hours
Extended Play (EP) . . . . . . . . . . . . . . . . . . . . Approx. 6 hours
Super Long Play (SLP) . . . . . . . . . . . . . . . . . Approx. 8 hours
Super Extended Play (SEP) . . . . . . . . . . . . Approx. 10 hours
Tuner
Receivable channels
VHF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–13ch
UHF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14–69ch
CATV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C1–C125ch
Note: The specifications and design of this product are subject
to change without notice, due to improvement.
Timer
Programs. . . . . . . . . . . . . . . . . . . . . . . 1 month/32 programs
Clock . . . . . . . . . . . . . . Quartz lock (12-hour digital display)
65
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
Audio
P
Picture quality
digital output settings 51
input settings 51
setting preferences for audio language 54
setting which channel to record 35
switching on playback 31, 32
switching TV audio 23
recording time vs. 33
setting for playback 50
setting for recording 34
video connections and 12
Playback 23 – 32
on-screen displays 26
parental lock for DVD-Video 52
picture quality settings for 50
settings 52
C
CD Audio
Progressive scan video 26
compatibility 8
playback controls for 24, 27 – 32
R
Recording 33 – 40
D
automatic chapter marking 52
copy-protection and 34
copyright and 34
on-screen displays 26
optimized 52
Dolby Digital
adjusting the dynamic range 50
dual mono sources and 32
explained 64
output setting 51
settings 52
DTS
timer programs 35 – 38
TV programs 22, 35, 37
using an external input 39, 51
Video mode vs. VR mode 33
Remote control
CD audio encoded with 24, 51
explained 64
output setting 51
DVD
aspect ratios 55, 56
compatibility 9, 39, 58
DVD-R vs. DVD-RW 9, 33, 43
finalizing 9, 39, 49
initializing a DVD-RW 40, 52
playback controls for 24, 27 – 32
Video mode vs. VR mode 9, 33, 41
buttons explained 18
changing the batteries 8
operating range 8
setting the remote ID 48
S
Subtitles
setting preferences for 54
switching 31
E
Editing 41 – 44
Video mode vs. VR mode 41
T
TV channels
L
automatic tuning 20
changing 22
manual setting 47
numbering 23, 46
recording 22, 35, 37
SAP audio channels and 17, 23, 32, 33, 35
VCR Plus+ Guide channels 37, 47
Language
audio 31, 54
code list 60
DVD menu 54
setting for menus and displays (OSD) 20, 46, 47
settings for DVD playback 54
subtitle 31, 54
66
En
Download from Www.Somanuals.com. All Manuals Search And Download.
V
Video CD
compatibility 8
playback control (PBC) 24, 55
playback controls for 24, 27 – 32
67
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Published by Pioneer Corporation.
Copyright © 2004 Pioneer Corporation.
All rights reserved.
PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: (905) 479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 656-472-1111
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270
K002E
Printed in China
<VRB1365-A>
Download from Www.Somanuals.com. All Manuals Search And Download.
|