DVD PLAYER
LETTORE PER DVD
DV-535
DV-530
Operating Instructions
Istruzioni per l’uso
Download from Www.Somanuals.com. All Manuals Search And Download.
CONGRATULATIONS ON YOUR PURCHASE OF
THIS FINE PIONEER PRODUCT.
CONGRATULAZIONI PER L’ACQUISTO DI
QUESTO PRODOTTO PIONEER.
Pioneer is on the leading edge of DVD research for
consumer products and this unit incorporates the latest
technological developments.
Pioneer è all’avanguardia della tecnologia DVD per il
consumatore e quest’unità include i suoi ultimi sviluppi
tecnologici.
We are sure you will be fully satisfied with the DVD
player.
Siamo certi che sarete soddisfatti di questo lettore per
DVD.
Thank you for your support.
Vi ringraziamo per la vostra scelta.
Please read through these operating instructions so
you will know how to operate your model properly.
After you have finished reading the instructions, put
them away in a safe place for future reference.
Leggere completamente questo manuale per essere
certi di saper usare correttamente il lettore per DVD.
Terminata la lettura, conservare il manuale in un luogo
sicuro per poterlo riutilizzare in caso di bisogno.
•
This player is not suitable for commercial use.
•
Questo lettore non è adatto all’uso commerciale.
Questo prodotto contiene una tecnologia di
This product incorporates copyright protection
technology that is protected by method claims of
certain U. S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be Authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise
authorized by Macrovision corporation. Reverse
engineering or disassembly is prohibited.
protezione dei diritti di autore, che è a sua volta
protetta dal contenuto di certi brevetti americani e da
altri diritti sulla proprietà intellettuale, posseduti dalla
Macrovision Corporation e da altri possessori di diritti.
L'uso di questa tecnologia di protezione dei diritti
d'autore deve essere autorizzato dalla Macrovision
Corporation, ed è inteso solamente per uso
domestico, o per altri scopi limitati, ove non altrimenti
autorizzato dalla Macrovision Corporation. L'uso di
tecniche di inversione e lo smontaggio sono proibiti.
En/It
Download from Www.Somanuals.com. All Manuals Search And Download.
The disc format logos shown above are found on disc
labels or on disc jackets.
• To prevent malfunction, do not use an 8 cm adaptor
(for CDs).
• Discs other than the ones indicated above cannot be
played on this unit.
Features of This Player
Com patible w ith DVD, Video CD
and CD form ats
• DVDs that have incompatible region numbers, DVD-
Audio, DVD-ROM, and CD-ROM cannot be played on
this unit. The region number of the player can be
found on the rear panel.
DVD, Video CD and CD discs that display the logos
shown below can be played back on PIONEER DVD
players. For more information on discs compatible with
this player, refer to the table below.
1
Types of playable
discs and their m arks Playable sides
Diam eter/
*
Playing recordable CDs
Playback tim e
• Note that this unit cannot record onto recordable discs.
• This unit can play music-use CD-R and CD-RW discs.
However, depending on the condition of the CD recorder
and the disc, you may find that not all discs will play
successfully. (For example, if the disc is scratched or
dirty, or if the player’s pickup lens is dirty.)
DVD VIDEO
DVD VIDEO
Digital audio
Digital video
(MPEG 2)
12 cm /
1 layer 133 m in.
single-sided
2 layer 242 m in.
12 cm /
1 layer 266 m in.
double-sided 2 layer 484 m in.
DVD VIDEO
Digital audio
Digital video
(MPEG 2)
8 cm /
1 layer 41 m in.
single-sided
2 layer 75 m in.
8 cm /
1 layer 82 m in.
double-sided 2 layer 150 m in.
VIDEO CD
VIDEO CD
Digital audio
Digital video
(MPEG 1)
Max. 74
12 cm /
single-sided
m inutes
VIDEO CD single
Digital audio
Digital video
(MPEG 1)
Max. 20
8 cm
/single-sided
m inutes
CD
CD
Digital audio
12 cm
Max. 74
m inutes
/single-sided
1
1
*
CD single
Digital audio
8 cm
Max. 20
m inutes
/single-sided
*
2
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Com patible w ith a w ide range of
DVD digital audio output form ats
Wide range of DVD view ing options
Multi-Angle (page 29)
You can view scenes from different camera angles when
watching movies or other media with multiple angle
playback available.
1
DVDs are recorded in one of four types of digital audio
formats (as of October 1998). The digital audio output
jacks of this player output Dolby Digital*2, DTS*3,
MPEG, and linear PCM digital bitstreams.
ANGLE
: 3/4
ANGLE
: 2/4
This player has a function that converts Dolby Digital and
MPEG audio formats into the linear PCM format. This
allows playback of DVDs recorded in Dolby Digital and
MPEG without the need for a decoder.
Multiple Languages (page 31)
You can select the language on when watching movies
or other media that have multiple language and/or audio
soundtracks recorded on them.
Easy setup and adjustm ent using
on-screen m enus
Press SETUP on the remote control to open the Setup
screen and you’ll find setting up and adjusting the
system easy to do with on-screen menus conveniently
organized and arranged. Additionally, on-screen
Dolby Digital
5.1CH
Dolby Digital
5.1CH
: 2 Spanish
Audio
: 1 English
Audio
information ( )❖ appears to clarify the functions and
i
explain the options available. Below are just a few
examples.
Answer a few questions and
have all the necessary audio,
Multi-Language Subtitles (page 32)
Audio1 Audio2 Video Language General
You can select a subtitle language or turn subtitles off
when watching movies or other media with subtitles
available.
Setup Navigator
Setup Navigator
video, and on-screen
language adjustments set
automatically by the player
using the Setup Navigator
(page 16).
Start
Auto Start Off
Subtitle :1 English
Subtitle :2 Spanish
ENTER
SETUP
Exit
Move
Select
Select the type of TV screen
you are using and the
preferred screen format
you’d like to use when
watching DVDs in the Video
menu (page 27).
HELLO!
HOLA!
Audio1 Audio2 Video Language General
TV Screen 4:3(Letter Box)
Video Out —4:3(Pan&Scan)
16:9(Wide)
This mark indicates this may not be possible with certain
discs.
Select your display preference
SETUP
Move
Exit
Energy-saving design
This unit is designed to use less than 1 W of energy
when this player is in standby mode.
❖
The on-screen information ( ) only appears if you
i
chose [English] as the [OSD Language] (page 17,
30).
While using the Setup Navigator, no on-screen
information (
i
) is displayed.
2
3
*
*
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works, © 1992-1997
Dolby Laboratories. All rights reserved.
“DTS” is trademarks of Digital Theater Systems, Inc.
3
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Differences in Disc
Composition
How to Proceed in This
Manual
DVD is an incredible format that presents the highest
quality digital audio and video available today.
DVD
Because using the DVD player and DVDs may be
confusing at first, following the order below should help
you get through the important stages of getting set up
so you can start using your player as soon as possible.
DVDs are divided into units referred to as titles, and
titles are divided into chapters. A DVD which contains a
movie may have only one title with many or no chapter
divisions. Karaoke DVDs may have many titles, assigning
a title to each song on the disc. Menu screens do not
belong to any title.
Get fam iliar w ith the player.
Refer to the section “Before Using” on page 6 to
confirm that all the accessories were included with the
player. If you are new to DVD, it might be beneficial for
you to go through the “Nam es and Functions” section
starting on page 7 to get familiar with the parts and
buttons on the main unit and remote control as they will
be referred to throughout this manual.
DVD player functions generally apply to titles on a disc or
chapters within a selected title. The player functions
available may also vary from title to title, depending on
the disc. When discs have a unique title division, it
should be noted that search and program functions may
be affected.
Title 1
Chapter 2
Title 2
Chapter 1 Chapter 2
There is also a list of terms that can be found on page 53
if you are having trouble understanding some of the
terminology associated with DVD.
Chapter 1
Make the necessary connections.
No entertainment system seems to be set up exactly
the same way. The “Making Connections” section
starting on page 12 shows how video and audio
connections may be made to suit your home
entertainment system.
DVD
Video CD/ CD
Set up the necessary player
m enus.
Video CDs and CDs are divided into units referred to as
tracks (Video CD tracks may also be referred to as
scenes). One song generally corresponds to one track.
Some tracks are further divided into units referred to as
indexes. Video CDs with PBC (Playback Control) also
contain menus recorded on the disc which enable easy
access to the contents of the disc.
Before you can begin to enjoy the benefits of the DVD
format, it is first necessary to set up the player to output
the video and audio information that corresponds to your
system. The section “Setting Up the Player” starting
on page 16 explains how to use the Setup Navigator, a
function that automatically sets up the player
corresponding to the answers given in a multiple-choice
on-screen procedure. The Setup screen menus,
described in the section starting on page 23, are also
used in a number of other functions. Learning the
procedure for operating these menus will make using
this player much easier and more enjoyable.
When played back on a DVD player, both Video CDs and
CDs are considered to be a single title, regardless of the
number of tracks.
Track 1
Track 2
Track 3
Track 4
Play a disc.
When all the connections and setups have been made,
you are ready to play a DVD, Video CD, or CD with the
player. The section “Getting Started Using Your DVD
Player” starting on page 19 outlines the basic player
operations.
Video CD
Track 2
Track 1
Track 3
Track 4
Track 5
Enjoy the m any features available.
Once you are comfortable using the basic player
functions, you are ready to take advantage of the various
options DVD and this player have to offer. The section
“Advanced Functions” starting on page 35 describes
how to use the features available on many DVDs.
CD
4
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Setting the Language Options ......... 30
Before Using ........................................ 6
Setting the on-screen display
Checking Accessories ..................................... 6
Preparing the Remote Control ......................... 6
(OSD) language ........................................ 30
Setting Language and Subtitle Preferences in
the Setup Screen Menus ......................... 30
Changing the Audio Language
(Multi-Language Function) ....................... 31
Selecting a Subtitle Language
Nam es and Functions ......................... 7
Front Panel ...................................................... 7
Display Window ............................................... 8
Rear Panel ....................................................... 9
Remote Control ............................................. 10
(Multi-Language Subtitles) ....................... 32
Advanced Functions ......................... 35
Making Connections ......................... 12
Setting the Parental Lock Level ..................... 35
Changing the Background Color
of the Screen ........................................... 36
Still Frame/Slow Play/
Frame Advance Playback ......................... 37
Searching for a Title, Chapter, Track,
Connecting Your DVD Player ......................... 12
Audio Connections ........................................ 13
Video Connections ......................................... 14
AV CONNECTOR Connection ........................ 15
System Control Connections ......................... 15
or Location on a Disc ............................... 38
Repeat Play.................................................... 39
Random Play.................................................. 40
Playback in a Desired Order
(Program Play) .......................................... 41
Continuing Playback from a Specified Location
(Last Memory).......................................... 44
Memorizing Settings for Often Viewed DVDs
(Condition Memory) ................................. 45
Viewing Disc Information .............................. 46
Resetting the Player to System Settings ....... 47
Setting Up the Player ....................... 16
Using the Setup Navigator............................. 16
Getting Started Using Your DVD
Player .............................................. 19
Playing DVDs, Video CDs and CDs ................ 19
Chapter (Track) Skip Forward/Skip Back ........ 21
Forward and Reverse Scanning ..................... 21
Resuming Playback from Where
You Stopped ............................................. 22
Stopping Playback and Switching
Power Off ................................................ 22
Additional Inform ation ..................... 48
Disc Care ....................................................... 48
For Proper and Long Use of This Unit ........... 48
Language Code List ....................................... 50
Troubleshooting ............................................. 51
Terms ............................................................. 53
Specifications ................................................ 55
Adjusting Audio and Video
Settings .......................................... 23
Using the Setup Screen Menus .................... 23
Changing to the Setup Screen “Expert” Menu
Mode ........................................................ 24
Setting the Digital Audio Output To Be
Compatible with Your AV Component ...... 25
Adjusting the Dynamic Range of the Audio
Soundtrack ............................................... 26
Setting the TV Screen Size ............................ 27
Setting the Video Output Format for
AV CONNECTOR Connections ............... 28
Selecting the Type of Paused Image to
Display ..................................................... 28
Turning the On-screen Display On or Off ...... 28
Setting the Position of the
On-screen Display .................................... 28
Viewing from a Desired Camera Angle
(Multi-Angle)............................................. 29
5
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the Remote Control
Before Using
Inserting batteries into the rem ote
control
1
While pushing the tab on the battery
com partm ent cover
tow ard the center of
the rem ote, pull out
in the direction
Checking Accessories
Please confirm that the following were received with the
player.
indicated by the
arrow .
Audio cord
2
Insert batteries.
Make sure to match the
plus (+) and minus
(–) polarity guides on the
batteries with the marks
inside the battery
Video cord
compartment.
Pow er cord
(European m odel)
3
Close the cover.
(UK m odel)
Notes
Rem ote control unit
• Do not mix old and new batteries.
• When replacing batteries, use all new batteries.
• When not using the remote control for a long period of time
(over 1 month), remove the batteries to avoid possible
damage from battery corrosion. If battery leakage occurs,
wipe the battery liquid from the battery component, then
insert new batteries.
5
5
• When disposing of used batteries, please comply with
governmental regulations or environmental public
instruction’s rules that apply in your country or area.
AA (R6P) dry cell batteries
Operating instructions (this manual)
Rem ote control operation
When operating the remote control, point it at the
remote sensor (Î) located on the player’s front panel.
The remote control can be used up to 7 m from the
player and within a 30° angle on each side of the sensor.
Notes
• Exposing the remote sensor to direct sunlight or strong
light may cause faulty operation.
• If the CONTROL IN jack on the player’s rear panel is
connected to the CONTROL OUT jack of another
component, point the remote control at the other
component to operate the player. Operation will not be
possible when pointed at this player (page 15).
30
30
7m
6
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and
Functions
Front Panel
1
2
4
6
3
5
DVD PLAYER
S TANDBY/ ON
0
4 1 ¡ ¢
7
8
3
Î
9
8 7
0
1
STANDBY/ ON button
Press to switch the player on or to put in standby
6 3 (play) button
Press to start or resume playback.
(pages 19, 22).
7 ¡ ¢ (forw ard) button
2 Disc tray
Press to advance to chapters/tracks. Press and hold
When loading a disc, place discs in the disc tray with
to perform fast-forward scanning (page 21).
the label side facing up (pages 19, 22).
8 4 1 (reverse) button
3 0 (open/ close) button
Press to go back to previous chapters/tracks. Press
and hold to perform reverse playback scanning
(pages 21).
Press to open and close the disc tray (pages 19, 22).
4 7 (stop) button
9 Rem ote sensor
Press to stop playback. Pressing once enables
playback to resume from a point shortly before the
location where it stopped. Pressing twice causes the
disc to return to the beginning of the disc if playback
starts again (page 22).
Point the remote control toward the remote sensor
to operate the player (page 6).
0 Display w indow
Displays system information (page 8).
5 8 (pause) button
Press during playback to pause. Press again to
resume playback (page 37).
7
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Window
1
2
4
9
6
7 8
0 -
=
~
3
5
DOLBY
DIGITAL
LAST
MEMO
GUI
DVD
VCD
CONDITION
TOTAL
REMAIN
CHP
TRK
TITLE
@
!
1 VCD indicator
9 CONDITION indicator
VCD lights when a Video CD is loaded. CD lights
when an audio CD is loaded.
Indicates that Condition Memory settings are
memorized for the currently loaded DVD (page 45).
2 DVD indicator
0 TOTAL indicator
Lights when a DVD is loaded.
Indicates that the disc in the player is stopped and
DISPLAY has been pressed (page 47).
3
indicator
-
indicator
Indicates Multi-Angle playback is in progress (page
Indicates that the Repeat function is on and that the
current title, chapter, or track is being repeated (page
39).
29).
4 TITLE indicator
Indicates a title number is being displayed.
= DOLBY DIGITAL indicator
Indicates Dolby Digital audio playback.
5 TRK indicator
Indicates a track number is being displayed.
~ LAST MEMO indicator
Indicates the Last Memory location is recorded in
memory for the currently loaded DVD or Video CD
(page 44).
6 CHP indicator
Indicates a chapter number is being displayed.
! Counter display
7 GUI indicator
Displays the playback mode, type of disc, title and
chapter/track numbers, playback time, etc.
Indicates an on-screen menu operation is being
performed (pages 16, 23).
@ 83 indicator
8 REMAIN indicator
3 light when any disc is playing. When a disc is
paused, 8 lights.
Indicates that the remaining playback time of a title
or chapter/track is being displayed.
8
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
1
2
3
5
6
4
DV-535
AC IN
DIGITAL OUT
DIGITAL
OUT
TV SYSTEM
AUDIO OUT
VIDEO
OUT
OPT
AV CONNECTOR
CONTROL
IN
L
R
PAL
NTSC AUTO
S-VIDEO
OUT
9
8 7
1 AV CONNECTOR jack
Use a 21-pin SCART cable to connect to a TV or
6 AC IN pow er cord connection term inal
Use to connect the power cord to the wall outlet
monitor compatible with this type of connection.
Both audio and video signals are output from the AV
CONNECTOR jack (page 15).
(page 12).
7 S-VIDEO OUT jack
If your TV or monitor has an S-video input, clear
picture reproduction is possible by connecting the
player to your TV or monitor via the S-Video jack.
(page 14).
2 TV SYSTEM sw itch
Use to change the TV signal mode to either PAL or
NTSC according to the type of TV and disc to be
used. When the switch is in the AUTO position, the
player outputs the format on the disc as is (page 14).
8 VIDEO OUT jack
Connect to the video input on a TV or monitor or AV
amplifier or receiver with video input capability.
(pages 12, 14).
3 DIGITAL OUT jack (coaxial)
Use to output the digital audio signal recorded on
discs. You can output the digital signal via either
coaxial output jack to an AV amplifier or receiver
(page 13).
9 AUDIO OUT jacks
Use to output two-channel audio (analog) to the
audio stereo inputs on a TV or stereo amplifier. If you
are connecting to a receiver that has both digital and
analog input jacks for DVD player connection, it may
be beneficial to make both connections (pages 12,
13).
4 DIGITAL OUT jack (optical (OPT.))
(DV-535 only)
Use to output the digital audio signal recorded on
discs. You can output the digital signal via either
optical output jack to an AV amplifier or receiver
(page 13).
5 CONTROL IN jack
Use to connect this player to another component
bearing the Pioneer Î mark. This lets you control
this unit as though it were a component in a system.
Player operations are then performed by pointing the
remote control at the component that the player is
connect to (page 15).
9
En
Download from Www.Somanuals.com. All Manuals Search And Download.
(Buttons indicated with * are used for menu operation.)
Remote Control
1 LAST MEMORY button
You can resume DVD or Video CD playback from the
point you last watched even if the disc is removed
from the player. Press LAST MEMORY during
playback to set a Last Memory point. When you
want to resume playback of that disc, press LAST
MEMORY in the stop mode and playback starts
from the memorized point. Last Memory locations
can be stored for up to 5 DVDs and 1 Video CD (page
44).
#
1
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
$
%
^
2
REP EAT
ANGLE
SUB TITLE
AUDIO
S ETUP
3
4
5
6
7
REP EAT
A-B
M ENU TOP MENU
&
*
(
RETURN
DISPLAY
2
(standby/ on) button
Press to switch the player on or to put in standby
¶
5
¶
(pages 19, 22).
8
9
0
2
NEXT
P REV
¢
4
3 AUDIO button
5
)
_
+
¶
¶
Press repeatedly to select one of the audio
languages and/or audio formats programmed on a
DVD (page 31).
For Video CD and CD, each press changes the audio
output as follows.
P LAY
3
PAUS E
8
S TOP
7
-
=
¶
FW D
¡
1REV
eS TEP / S LOW
E
¡
™
CLEAR
+1 0
0
3
6
9
2
1
=
Stereo = 1/ L (Left) = 2/ R (Right)
5
4
7
~
8
4 SUBTITLE button
PROGRAM SEARCH MODE
RANDOM
Press repeatedly to select one of the subtitle
languages programmed on a DVD or to turn the
subtitles off (page 32).
Î
!
@
£
5 SETUP button*
Press when the player is in either play or stop mode
to open and close the Setup screen (pages 16, 23).
6 MENU button*
Use to display or close the DVD menu screen (page
20).
7 DISPLAY button
Press during playback to display statistical disc
information. Press repeatedly to display different
information (page 46).
8 Cursor buttons (2/ 3/ 5/ ∞)*
Use to move through the options on menu screens
and to change settings.
9 ENTER button*
Use to implement settings selected with the cursor
buttons or to set items highlighted in a menu.
0 PREV 4 (previous)
During playback, press PREV 4 to go back to a
previous chapter/track (pages 20, 21).
- STOP 7 button
Press to stop playback. Pressing once enables
playback to resume from a point shortly before the
location where it was stopped. Pressing twice
causes the disc to return to the beginning of the disc
when playback starts again (page 22).
10
En
Download from Www.Somanuals.com. All Manuals Search And Download.
= STEP/ SLOW e/ E buttons
_ PLAY 3 button
Press STEP/ SLOW E during playback to view
slow playback. In pause mode, press STEP/ SLOW
E to advance DVDs and Video CDs frame by frame
and STEP/ SLOW e to back up a few frames at a
time (page 37).
Press to start disc playback.
+ PAUSE 8 button
Press to pause playback of a disc. Press again to
resume playback (page 37).
~ Num ber buttons (1-9, 0, +10)*
¡ 1 REV/ FWD ¡ (fast reverse/ forw ard)
Use to perform direct title and chapter/track
searches, and to input numerical values.
buttons
During playback of DVD and Video CD, press
FWD ¡ to perform fast forward scanning. Press
REV 1 to perform fast reverse scanning of DVD
and Video CD. When a CD is loaded, audio scanning
is performed (page 21).
! RANDOM button
Press to play chapters/tracks in random order (page
40).
@ PROGRAM button
™ CLEAR button
You can program titles, chapters, or tracks to play
back in a desired order. Programs can be a
maximum of 24 steps. Additionally, DVD programs
for up to 24 discs can be stored in the player’s
memory for future use (pages 41-43).
Works in conjunction with a number of player
functions. Use to cancel repeat and random
playback, and to edit programs.
£ SEARCH MODE button
Press to perform a title, chapter/track or elapsed
time search (page 38).
# CONDITION MEMORY button
You can store in memory the settings for up to 15
DVDs. Press CONDITION MEMORY during DVD
playback to memorize the settings (page 45).
$ OPEN/ CLOSE button
Press to open or close the disc tray (pages 19, 22).
% ANGLE button
Some DVDs are recorded with various camera angle
playback options. Press ANGLE repeatedly to
display different camera angles (page 29).
^ REPEAT button
Press once to repeat playback of current chapter/
track. Press twice to repeat playback of current title
(page 39).
& REPEAT A-B button
Press at the beginning and end of the section you
want to repeat or to mark a location you want to
return to (page 39).
* TOP MENU button*
Press to call up the top menu programmed on the
DVD. Depending on the DVD, the top menu may be
identical to the DVD menu (page 20).
( RETURN button*
Use to go one menu back (current settings are
maintained). Use RETURN when you do not want to
change the option setting in a menu.
) NEXT ¢
During playback, press NEXT ¢ to advance to the
next chapter/track (pages 20, 21).
11
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Guide
Making
Connections
The illustration on this page shows the basic setup using
the audio and video cords included with this player. Use
this illustration as a guide to setting up your home
system.
An explanation of each type of audio and video
connection available can be found on pages 13 to 15 . To
determine the best audio and video connection setup for
your system, refer to the manuals supplied with the
components you are making connections to.
In addition to making physical connections to your TV or
monitor, it is also necessary to assign the TV screen size.
You can use the [Setup Navigator] in the Setup screen
General menu to set whether you are using a wide
screen or standard size TV or monitor (page 17).
Additionally, you can use the [TV Screen] setting in the
Setup screen Video menu (page 27).
Connecting Your DVD Player
Unlike any other audiovisual media format, DVD offers a
wide array of audio and video output options which
allows playback to be enjoyed in any number of system
configurations from a standard TV with stereo audio
input to a home theater system with a TV or monitor and
full surround sound capabilities.
Notes
•
When making connections to this unit or when changing
connections, check that the unit is off by pressing
STANDBY/ ON and unplug the power cord from the
power outlet.
•
The analog video output on this player uses copy protect
circuitry to prevent the video playback on DVDs from being
copied. If you connect the player to a TV via a VCR, or
record and play back the contents of a disc with a VCR, the
playback picture may not be normal.
DV-535
AC IN
DIGITAL OUT
DIGITAL
OUT
TV SYSTEM
AUDIO OUT
VIDEO
OUT
OPT
AV CONNECTOR
CONTROL
L
IN
R
PAL
NTSC AUTO
S-VIDEO
OUT
Audio cord
(Included)
Video cord
(Included)
Finally, connect to a
pow er outlet (220-240 V).
TV or m onitor
L
R
VIDEO IN S-VIDEO IN
AUDIO IN
Make audio connections from the AUDIO
OUT jacks on the player to the AUDIO IN
jacks on the TV or m onitor using the stereo
audio cord included w ith the player. Be sure
to m atch the color of the plugs w ith the
color of the jacks (red and w hite).
Make video connections from the VIDEO
OUT jack on the player to the VIDEO IN jack
on the TV or m onitor using the video cord
included w ith the player.
12
En
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL OUT (Coaxial)
The digital signal is transmitted electronically through a
coaxial cable.
Audio Connections
This player features two digital (optical and coaxial) and
also analog audio output formats.
•
Use to connect to an AV amplifier or receiver with
built-in Dolby Digital, DTS, or MPEG decoder.
•
Use a coaxial cable (not supplied) to connect the
DIGITAL OUT (coaxial digital output) on the player to
the coaxial digital input on an AV amplifier or receiver.
Digital Audio Connections:
You can enjoy the digital audio recorded on DVD discs
from both optical digital and coaxial digital output jacks.
DV-535
When m aking digital audio connections, do not
m ake connections from both the coaxial and optical
digital outputs to the sam e com ponent.
AC IN
DIGITAL OUT
DIGITAL
OUT
TV SYSTEM
AUDIO OUT
VIDEO
OUT
OPT
AV CONNECTOR
CONTROL
IN
R
L
PAL
NTSC AUTO
S-VIDEO
OUT
When a DVD recorded in Dolby Digital, DTS, or MPEG is
loaded, noise will be output if you have made
DIGITAL OUT
connections via the digital audio jacks to a receiver or
amplifier that cannot decode a Dolby Digital, DTS, or
MPEG digital bitstream. In this case, be sure to set up
the Setup Navigator audio settings to best reflect the
type of system you are using (page 18). Additionally, the
digital audio settings can be adjusted manually in the
Setup screen Audio 1 menu (page 25-26).
DIGITAL IN
DIGITAL OUT (Optical)(DV-535 only)
The digital signal is transmitted as light pulses through a
fiber-optic cable.
• Use to connect to an AV amplifier or receiver with
built-in Dolby Digital, DTS, or MPEG decoder.
AV am plifier or receiver w ith
built-in Dolby Digital, DTS, or
MPEG decoder
• Use a fiber-optic cable (not supplied) to connect the
DIGITAL OUT OPT (digital optical output) on the
player to the digital optical input on an AV amplifier or
receiver.
Analog Audio Connection:
AUDIO OUT
DV-535
•
•
•
Make analog audio connections to a stereo amplifier
or receiver.
AC IN
DIGITAL OUT
DIGITAL
OUT
TV SYSTEM
AUDIO OUT
VIDEO
OUT
OPT
AV CONNECTOR
CONTROL
IN
Analog audio connections can also be made to a TV or
monitor with stereo input jacks.
R
L
PAL
NTSC AUTO
S-VIDEO
OUT
Use the supplied audio cord to connect the AUDIO
OUT on the player to the audio input on the stereo
amplifier or receiver.
DIGITAL
OUT
OPT
•
When making analog audio connections, be sure to
match the color of the plugs with the color of the
jacks (red and white).
DIGITAL IN
DV-535
AC IN
DIGITAL OUT
DIGITAL
OUT
TV SYSTEM
AUDIO OUT
VIDEO
OUT
OPT
AV CONNECTOR
CONTROL
IN
R
L
PAL
NTSC AUTO
S-VIDEO
OUT
AV am plifier or receiver w ith
built-in Dolby Digital, DTS, or
MPEG decoder
R
L
AUDIO OUT
AUDIO IN
R
L
Stereo am plifier or receiver
13
En
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SYSTEM sw itch
Video output changes as follows according to the
playback disc‘s recorded format.
Video Connections
This player features S-video and composite output
possibilities.
NTSC = PAL, PAL = NTSC conversion is possible on
Video CDs. PAL = NTSC conversion is not possible on
DVDs. When the TV SYSTEM switch is set to the
AUTO position, the disc’s format will be output as is.
When a CD or disc is not loaded, the previous video
output format will be selected.
Check the manual supplied with your TV or monitor to
determine the best possible connection for your system.
In addition to making physical connections to your TV or
monitor, it is also necessary to assign the TV screen size.
You can use the [Setup Navigator] in the Setup screen
General to set whether you are using a wide screen or
standard size TV or monitor (page 17). Additionally, you
can use the [TV Screen] setting in the Setup screen
Video menu (page 27).
TV SYSTEM
PAL
S-VIDEO OUT
NTSC
AUTO
• Make S-video connections to a TV or monitor with
S-video input to produce a high quality video image.
• Use an S-video cable (not supplied) to connect the S-
VIDEO jack on the player to S-video input on the TV or
monitor.
Disc
Output form at
Position of TV SYSTEM switch
DV-535
Form at
Type
DVD
AC IN
DIGITAL OUT
NTSC
NTSC
PAL
MOD. PAL
PAL
AUTO
DIGITAL
OUT
TV SYSTEM
AUDIO OUT
VIDEO
OUT
OPT
AV CONNECTOR
CONTROL
IN
R
L
PAL
NTSC AUTO
S-VIDEO
OUT
NTSC
PAL
NTSC
PAL
NTSC
NTSC
NTSC
MOD. PAL
PAL
NTSC
NTSC
PAL
Video CD
PAL
S-VIDEO
OUT
PAL
NTSC or PAL
CD, No disc
About MOD. (Modulation) PAL
S-VIDEO IN
•
SHRINK
Most models of the newly developed countdown PAL
TV system detect 50 Hz (PAL)/60 Hz (NTSC) and
automatically switch vertical amplitude, resulting in a
display without vertical shrinkage.
•
If your PAL TV does not have a V-Hold control, you
may not be able to view NTSC disc because the
picture may roll. If the TV has a V-Hold control, adjust
it until the picture stops rolling. On some TVs, the
picture may shrink vertically, leaving black bands at
the top and bottom of the screen. This is not a
malfunction; it is caused by the NTSC = PAL
conversion.
TV or m onitor
VIDEO OUT
• Make composite video connections to a standard TV
or monitor with a video input jack.
• Use the supplied video cable to connect the VIDEO
OUT jack on the player to the video input on the TV or
monitor.
• Be sure to match the color of the plug with the color
of the jack (yellow).
DV-535
AC IN
DIGITAL OUT
DIGITAL
OUT
TV SYSTEM
AUDIO OUT
VIDEO
OUT
OPT
AV CONNECTOR
CONTROL
IN
R
L
PAL
NTSC AUTO
S-VIDEO
OUT
VIDEO
OUT
VIDEO IN
TV or m onitor
14
En
Download from Www.Somanuals.com. All Manuals Search And Download.
AV CONNECTOR Connection
System Control Connections
Using a commercially available cord with a mini plug
(3.5 mm dia. with no resistance) to connect this player’s
CONTROL IN jack to the CONTROL OUT jack of
another PIONEER component bearing the Î mark, you
can control the player as though it were a component in
a system (system control).
Using a commercially available 21-pin SCART cable,
connect the AV CONNECTOR jack on the player to a TV
or monitor to achieve audio and video with a single
connection.
•
In addition to making physical connections to your TV
or monitor, it is also necessary to set the video output
format to composite video, S-video, or RGB in the
Setup screen Video menu (page 28).
SCART cables are available in a variety of
configurations. Before making connections, be sure to
check that the cable you are planning to use is
appropriate for the TV or monitor you are making
connections to.
•
If you connect for system control, you cannot operate
the player directly. Point the remote control unit at the
component (AV amplifier, etc.) connected to the
CONTROL OUT jack to operate.
When controlling as a system, be sure to make a
connection to the amplifier using an audio or video
cord, even when using only digital components.
For details, refer to the operation manuals of the
connected components.
•
•
•
•
AV CONNECTOR pin signal descriptions can be found
in the ‘Specifications’ (page 55).
DV-535
DV-535
AC IN
DIGITAL OUT
DIGITAL
OUT
TV SYSTEM
AUDIO OUT
VIDEO
OUT
OPT
AV CONNECTOR
CONTROL
IN
R
L
PAL
NTSC AUTO
S-VIDEO
OUT
AC IN
DIGITAL OUT
DIGITAL
OUT
TV SYSTEM
AUDIO OUT
VIDEO
OUT
OPT
AV CONNECTOR
CONTROL
IN
R
L
PAL
NTSC AUTO
S-VIDEO
OUT
CONTROL
IN
AV CONNECTOR
TV or m onitor
CONTROL
OUT
Pioneer com ponent w ith Î m ark.
15
En
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Prem ere il pulsante
pannello anteriore ( sul telecom ando).
STANDBY/ ON del
Setting Up the
Player
Press SETUP.
When SETUP is pressed for the first time, the
following screen appears. Though the Setup
Navigator may be used more than once, this screen
only appears the first time SETUP is pressed.
Using the Setup Navigator
The Setup Navigator has been designed to simplify the
process of getting the DVD player ready to perform.
Designed as a series of on-screen multiple-choice
questions, the Setup Navigator automatically sets the
audio, video, and language settings according to how the
questions are answered. Once this procedure is
complete, it will be possible to begin using the DVD
player to enjoy DVDs.
Audio1 Audio2 Video Language General
Setup Navigator
Setup Navigator
Start
Auto Start Off
ENTER
SETUP
Exit
Move
Select
The procedure on this page describes the operations
necessary to function within the Setup Navigator
screens. A detailed description of the contents of each
question that appears on the screen can be found on
the following pages.
3
4
Use the cursor buttons (5/ ∞) to m ake a
selection.
•
If you are going to use the Setup Navigator, it is
not necessary to change the setting on the first
screen. Please proceed to the next step.
When setting up for the first tim e
Some DVDs start playing automatically when loaded in
the player. Because the Setup Navigator cannot be used
if a disc is playing, it is recommended to set up the
player using the Setup Navigator before loading a DVD
for the first time. If a DVD has been loaded, be sure to
press STOP 7 before proceeding.
•
If you do not w ant to set up the player using
the Setup Navigator, use the cursor button
(∞) to select [Auto Start Off] at this tim e.
The Setup Navigator function may still be used at
a later time in manual Setup screen menu
operation (page 23).
Press ENTER.
The selection is entered and the next Setup
Navigator screen appears.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
1
2
3
REP EAT
ANGLE
AUDIO
S ETUP
SUB TITLE
REP EAT
A-B
M ENU TOP MENU
RETURN
DISPLAY
5
¶
¶
Use steps 3 and 4 as a basis for entering selections on
the all of the Setup Navigator screens described on the
following pages.
2
4
NEXT
¢
P REV
4
5
¶
¶
P LAY
3
PAUS E
8
S TOP
7
¶
To change the answ er to a prior question
1REV FW D
¡
eS TEP / S LOW
E
Use the cursor button (2) to return to previous
screens. Please note, however, that you cannot go
forward using the cursor button (3), so it will be
necessary to answer all the questions that occur after
the screen that was returned to.
CLEAR
2
3
6
9
1
+1 0
5
4
7
0
8
PROGRAM SEARCH MODE
RANDOM
Î
To exit the Setup Navigator
Press SETUP while on any of the screens to exit the
Setup Navigator. Please note that if the Setup Navigator
is exited before all the questions are answered, no
settings are changed.
1
To return to the Setup screen
DVD PLAYER
Press RETURN. The Setup Navigator is exited and the
Setup screen General menu screen appears. Please
note that no settings are changed if RETURN is pressed
before the Setup Navigator is finished.
S
TANDBY/ ON
0
4 1 ¡ ¢
7
8
3
Î
16
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the OSD Language
Setting the TV screen size
(On-Screen Display Language)
The [TV Type] screen establishes the size, or more
appropriately the width to height ration of your television
or monitor. The width-to-height ratio of conventional TVs
is 4:3, while the width-to-height ratio of wide screen and
high-definition TVs is 16:9. This width-to-height ratio is
called the aspect ratio.
The [OSD Language] screen establishes the OSD
language, or on-screen display language, which refers to
the language that is used by the player in menus and
on-screen messages. Additionally, the language that is
established at this setting will also be used for the
default audio and subtitle language.
Audio1 Audio2 Video Language General
Setup Navigator
Audio1 Audio2 Video Language General
Setup Navigator English
français
TV Connection
TV Type
Widescreen (16:9)
Standard (4:3)
Language
Deutsch
Italiano
Español
OSD Language
ENTER
SETUP
Exit
Move
Select
ENTER
SETUP
Exit
Move
Select
Settings: Widescreen (16:9)*
Settings: English*
français
Standard (4:3)
Deutsch
* Factory setting
Italiano
Español
Note
There are two screen formats that can be used to display
wide-screen format DVDs: letter box and pan & scan. When
[Standard (4:3)] is selected in the Setup Navigator, the letter
box screen format is automatically selected. To switch the
preference to the pan & scan format, make changes in the
Setup screen Video menu [TV Screen] setting (page 27).
* Factory setting
Note
In addition to setting the [OSD Language], the audio and
subtitle language are also set at this time. If you wish to
change the audio or subtitle language to a different language,
make changes in the Setup screen Language menu [Audio
Language] and [Subtitle Language] as needed (page 30,
32).
17
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting digital audio connections
to an AV am plifier or decoder
Confirm ing the settings
The [Exit Setup Navigator] is the final screen in the
Setup Navigator.
The [Digital J ack] screen establishes whether digital
connections have been made to an AV amplifier,
receiver, or external decoder. As there are numerous
options available, please refer to the instructions
supplied with the component the player is connected to
determine what digital audio formats can be decoded. If
you have made no digital connections, select [Not
Connected].
Audio1 Audio2 Video Language General
Setup Navigator
Save Changes
Exit Setup Navigator
Delete Changes
Start Again
ENTER
SETUP
Exit
Move
Select
Settings: Save Changes*
Audio1 Audio2 Video Language General
Setup Navigator Dolby Digital
Dolby Digital/DTS
Select to have the player make all of the
necessary audio, video and language settings
according to your responses in the Setup
Navigator.
Amp Connection
Dolby Digital/MPEG
Dolby D/DTS/MPEG
Digital Jack
PCM
Not Connected
Delete Changes
ENTER
SETUP
Exit
Move
Select
Select to exit the Setup Navigator without
changing any of the system settings.
Start Again
Settings: Dolby Digital*
Dolby Digital/ DTS
Dolby Digital/ MPEG
Dolby D/ DTS/ MPEG
PCM
Select to return to the [OSD Language]
screen of the Setup Navigator and do the
settings again.
* Factory setting
Not Connected
* Factory setting
To exit the Setup screen
When you have completed setting up the player using
the Setup Navigator or if you exit the Setup Navigator,
the Setup screen General menu appears. Press SETUP
to close the Setup screen.
Setting com patibility w ith 96 kHz
output
The [96 kHz PCM Audio] screen establishes whether or
not the AV component the player is connected to is
capable of processing an audio signal with a sampling
rate of 96 kHz. This screen only appears if connections
have been made to an external AV component as
determined in previous screens.
To change other player settings in the Setup
screen m enus
The procedure for changing the settings in the Setup
screen menus is described on page 23.
Audio1 Audio2 Video Language General
Setup Navigator
Amp Connection
96 kHz PCM Audio
No
Yes
Don't Know
ENTER
SETUP
Exit
Move
Select
Settings: No*
Select if the connected AV component
cannot process an audio signal with a
sampling rate of 96 kHz.
Yes
Select if the connected AV component can
process an audio signal with a sampling rate
of 96 kHz.
Don’t Know
Select if you are uncertain whether the
connected AV component can process an
audio signal with a sampling rate of 96 kHz.
* Factory setting
18
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Using Your DVD
Player
1
2
3
Press
panel).
(
STANDBY/ ON on the front
Press OPEN/ CLOSE (0 on the front panel).
The disc tray comes out.
Load a disc.
Load a disc with the label side facing up, using the
disc tray guide to align the disc.
Playing DVDs, Video CDs and
CDs
– DVD/Video CD/CD
Before you can start to enjoy the digital audio and video
on DVDs, be sure that you have either performed the
Setup Navigator procedure described in the previous
section or made the necessary settings in the Setup
screen menus as outlined in the next section to set up
the player to correspond to your home system. Having
made these settings, you are now ready to start using
the player to enjoy DVDs, Video CDs, and CDs.
3
8
7
¢
¡
1
4
0
4
5
Press PLAY 3 (3 on the front panel).
•
•
The disc tray closes, and playback begins.
Depending on the disc, a m enu m ay be
displayed. If a m enu is displayed, proceed to
step 5.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
1
5
2
5
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
REP EAT
A-B
M ENU TOP MENU
Select the item you w ant to view .
RETURN
DISPLAY
5
¶
¶
•
When a DVD is loaded:
2
Select the item with the cursor buttons (2/3/5/
NEXT
¢
P REV
∞) or the num ber buttons then press ENTER.
When a Video CD is loaded:
4
5
¶
¶
•
P LAY
3
PAUS E
8
S TOP
7
¶
Use the num ber buttons to select the item.
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
4
+1 0
5
4
7
Notes
0
8
• Noise is output if you make digital audio connections to a
receiver or amplifier that does not have a built-in decoder.
Check that the digital audio output format selected in the
Audio 1 menu corresponds to the audio components you
have made connections to (page 25-26).
PROGRAM SEARCH MODE
RANDOM
Î
• The TV screen size is factory set to present the wide
screen format (16:9 aspect ratio). If you have a standard TV
screen (4:3 aspect ratio), this setting can be changed to
match your TV screen size in the Video menu (page 27).
1
3
2
4
DVD PLAYER
S
TANDBY/ ON
0
4 1 ¡ ¢
7
8
3
Î
When an operation is prohibited
There are times when you are using the player and attempt to
perform an operation, but for some reason it cannot be
performed. When this occurs, one of the two following icons
appears on the screen.
The operation is prohibited by the player.
The operation is prohibited by the programming on
the disc.
19
En
Download from Www.Somanuals.com. All Manuals Search And Download.
To open or return to the DVD or Video CD
m enu screen
Although this differs depending on the disc, pressing
MENU, TOP MENU, or RETURN during DVD playback
or RETURN during Video CD playback displays the menu
screen. Refer to the DVD or Video CD disc jacket and
accompanying documentation for more information.
When a m enu screen is displayed
Menu screens are displayed for DVDs that have menu
screens or Video CDs that include Playback Control
(PBC). DVDs often contain extra information that can be
accessed in the DVD menu and sometimes makes
navigating DVD menu screens as enjoyable as watching
the feature presentation.
To navigate a m enu screen
•
•
•
Although individual DVD titles may differ, when a
menu screen is displayed, use the cursor buttons (2/
3/5/∞) and ENTER on the remote control. The cursor
buttons are used to move around the options on the
screen and ENTER is used for selection.
OPEN/
CONDITION
CLOSE
LAST
MEMORY MEMORY
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
MENU
TOP MENU
REP EAT
A-B
M ENU TOP MENU
RETURN
DISPLAY
5
¶
Occasionally, the num ber buttons may also be used
to make selections. If this is possible, using num ber
buttons serves to directly select an option on a menu
screen. Only num ber buttons are used to make
selections on Video CD menu screens.
¶
RETURN
ENTER
E
N
R
E
Cursor
buttons
NEXT
¢
P REV
4
5
¶
¶
NEXT ¢
PREV 4
P LAY
3
PAUS E
8
S TOP
7
¶
STOP 7
When the Video CD has more than one menu, pages
can be advanced to or returned to with PREV 4 or
NEXT ¢.
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
+1 0
5
4
7
Num ber
buttons
0
8
To play Video CDs w ithout displaying m enu
screens
SEARCH MODE
RANDOM PROGRAM
Î
Video CDs with Playback Control (PBC) display a menu
screen when play is started. It is possible, however, to
play back Video CDs without displaying menu screens.
When a Video CD with PBC is loaded, press STOP 7,
and then the num ber button of the track you want to
play.
Exam ple: When a DVD that has menu screens is loaded
1 Highlight Clips
2 Chapter List
3 Commercial Header
4 Subtitles
5 Soundtrack
6 Start Main Feature
Exam ple: When a Video CD that has Playback Control is
loaded
STANDARD VOCAL BEST
1
2
3
4
5
6
7
8
Don't Tekno for an Answer
Bad Whack Naff Riff
dubmyheadbassman
Gooey Love Jingle
Praise the Day
Bertie B.& the Goans
Hood in the Boyz
Sleek Machine
Philip William
Formerly an Artist
Pfeuti
G3, Ba-san
Abstract Jazz Phunk
Rock the Love Jive
John Torn
Hot Monkey Stick
20
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Advancing to the next chapter
(track)
Chapter (Track) Skip Forward/
Skip Back
– DVD/Video CD/CD
Press NEXT ¢ (¡ ¢ on the front panel).
OPEN/
CLOSE
LAST
CONDITION
MEMORY MEMORY
•
•
Press to skip forward to the next chapter (track).
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
You can advance more than one chapter (track)
forward by pressing and holding NEXT ¢ and
releasing when the desired chapter (track) number
appears in the display.
REP EAT
A-B
M ENU TOP MENU
RETURN
DISPL
A
Y
5
¶
¶
NEXT
P REV
¢
4
5
¶
¶
PREV 4
NEXT ¢
S TOP
7
P LAY
3
PAUS E
8
Skipping back to the previous
chapter (track)
¶
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
+1 0
5
4
7
Press PREV 4 (4 1 on the front panel).
0
8
SEARCH MODE
RANDOM PROGRAM
Î
•
•
•
Press once to skip back to the start of the chapter
(track) currently playing.
Press twice to skip back to the start of the previous
chapter (track).
You can skip back to previous chapters (tracks) by
pressing and holding PREV 4 and releasing when
the desired chapter (track) number appears in the
display.
DVD PLAYER
S
TANDBY/ ON
0
4 1 ¡ ¢
7
8
3
Î
4 1
¡ ¢
Fast forw ard scanning
Forward and Reverse
Scanning
– DVD/Video CD/CD
Press and hold FWD ¡ (¡ ¢ on the front
panel) during playback.
OPEN/
CLOSE
LAST
CONDITION
MEMORY MEMORY
•
•
Release FWD ¡ when you reach the desired
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
location. Normal playback resumes.
REP EAT
A-B
M ENU TOP MENU
When the “Scan” indicator on the screen changes
from flashing to lit, fast forward scanning will continue
even if the button is released. When the desired
location has been reached, press PLAY 3.
RETURN
DISPL
A
Y
5
¶
¶
NEXT
¢
PLAY 3
P REV
4
5
¶
¶
S TOP
7
P LAY
3
PAUS E
8
¶
Fast reverse scanning
1REV FW D
¡
eS TEP / S LOW
E
1 REV/ FWD ¡
CLEAR
2
3
6
9
1
+1 0
Press and hold REV 1 (4 1 on the front
panel) during playback.
5
4
7
0
8
SEARCH MODE
RANDOM PROGRAM
Î
•
•
Release REV 1 when you reach the desired
location. Normal playback resumes.
When the “Scan” indicator on the screen changes
from flashing to lit, fast reverse scanning will continue
even if the button is released. When the desired
location has been reached, press PLAY 3.
3
DVD PLAYER
S
TANDBY/ ON
0
4 1 ¡ ¢
7
8
3
Î
4 1
¡ ¢
21
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Resuming Playback from
Stopping Playback and
Switching Power Off
– DVD/Video CD/CD
Where You Stopped
– DVD/Video CD
Use the resume feature to restart playback from the
point that the disc was stopped last time.
Press STOP 7 once.
The display shows “RESUME” and the stop position is
memorized.
OPEN/
CLOSE
CONDITION
MEMORY
LAST
MEMORY
2
4
1
• The resume position remains memorized as long as
the disc is in the player — even if you switch the
power off.
• Pressing STOP 7 twice causes the disc to return to
the beginning when PLAY 3 is pressed again. The
display shows the disc type (DVDs or Video CDs).
REP EAT
ANGLE
AUDIO
S ETUP
SUB TITLE
REP EAT
A-B
M ENU TOP MENU
RETURN
DISPLAY
5
¶
¶
NEXT
¢
P REV
4
5
¶
¶
Press PLAY 3.
Playback starts from the resume position.
P LAY
3
PAUS E
8
S TOP
7
¶
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
+1 0
5
4
7
Notes
0
8
• The actual restart position may be slightly before or after
the resume position.
RANDOM PROGRAM SEARCH MODE
Î
• If you want to remove the disc, but still want to resume
playback from the last stopped position, use the LAST
MEMORY feature instead (page 44).
4
3
2
DVD PLAYER
S
TANDBY/ ON
0
4 1 ¡ ¢
7
8
3
Î
1
1
2
3
Press STOP 7 (7 on the front panel).
Playback stops.
Press OPEN/ CLOSE (0 on the front panel).
The disc tray comes out.
Rem ove the disc.
3
8
7
¢
¡
1
4
4
Press
panel).
(
STANDBY/ ON on the front
The disc tray goes back in.
22
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Audio
and Video
1
2
Press STANDBY/ ON on the front panel
on the rem ote control)
(
Press SETUP.
The Setup screen appears.
Settings
Using the Setup Screen
Menus
The procedure on this page describes how to operate the
menus on the Setup screen. These menus are used to
set and adjust a number of system settings. The various
functions that can be adjusted are covered throughout
this manual. The procedure on this page provides a basic
outline for using the Setup screen menus.
(Exam ple)
Audio1 Audio2 Video Language General
Dolby Digital Out – Dolby Digital
DTS Out – Off
96kHz PCM Out – 96kHz 3 48kHz
MPEG Out – MPEG 3 PCM
Setup audio
Digital output format/tone adjust
Move
SETUP Exit
3
4
Use the cursor buttons (2/ 3) to select the
m enu you w ant.
As each menu is selected with the cursor, the
settings appear below the menu heading.
When setting up for the first tim e
It is recommended to set up player using the Setup
Navigator (page 16). If you selected [Auto Start Off]
when the Setup Navigator appeared, you may still set up
the player using the Setup Navigator in the General menu
screen.
Press the cursor buttons (∞) to enter the
m enu.
The top item within the menu becomes highlighted.
If you choose not to use the Setup Navigator, be sure to
make the necessary settings in the Setup screen
Audio 1, Audio 2, Video, and Language menus as
described on the following pages.
Some DVDs start playing automatically when loaded in
the player. If a DVD has been loaded, be sure to press
STOP 7 before proceeding.
(Exam ple)
Audio1 Audio2 Video Language General
Dolby Digital Out Dolby Digital
Dolby Digital 3 PCM
DTS Out -
96kHz PCM Out – 96kHz 3 48kHz
MPEG Out – MPEG 3 PCM
Change Dolby Digital output mode
SETUP
Move
Exit
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
1
2
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
5
6
Use the cursor buttons (5/ ∞) to select the
REP EAT
A-B
M ENU TOP MENU
setting you w ant to change.
RETURN
DISPLAY
The options available for each setting appear to the
right when the setting is selected. The current
setting appears with the setting indicator lit.
5
¶
¶
2
3, 4, 5, 6
NEXT
¢
P REV
4
5
¶
¶
Press the cursor buttons (3) to enter the
setting options.
P LAY
3
PAUS E
8
S TOP
7
¶
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
(Exam ple)
2
3
6
9
1
+1 0
5
4
7
Audio1 Audio2 Video Language General
0
8
Dolby Digital Out Dolby Digital
Dolby Digital 3 PCM
DTS Out -
96kHz PCM Out – 96kHz 3 48kHz
PROGRAM SEARCH MODE
RANDOM
Î
MPEG Out – MPEG 3 PCM
Output Dolby Digital
ENTER
SETUP
Exit
Move
Select
•
Not all menu options can be changed while a disc
is playing. In these cases, the options appear
grayed out on the screen and cannot be adjusted.
To change these settings, press STOP 7 first
before pressing SETUP.
1
DVD PLAYER
S
TANDBY/ ON
0
4 1 ¡ ¢
7
8
3
Î
•
•
Operating the menu after pressing STOP 7 may
cancel the resume function.
Some menu options are not immediately
effective if set while a disc is playing. To make
these settings effective, stop playback and then
start again, or change the settings while the disc
is stopped.
continued
23
En
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
Changing to the Setup Screen
“Expert” Menu Mode
The Setup screen menus are divided into two levels,
[Basic] and [Expert], to make this unit more convenient
to operate for different levels of users. The [Basic]
menu mode contains functions that may be considered
necessary for the basic operations of this player and
REP EAT
ANGLE
AUDIO
S ETUP
SUB TITLE
REP EAT
A-B
M ENU TOP MENU
9
RETURN
DISPLAY
5
¶
¶
7, 8
7
2
7, 8
NEXT
¢
P REV
4
5
¶
¶
P LAY
3
PAUS E
8
S TOP
7
¶
1REV FW D
¡
eS TEP / S LOW
E
i
helpful on-screen information identified by the
mark.
CLEAR
2
1
3
6
9
The [Expert] menu mode adds to the [Basic] menu
mode additional functions of the player that can be
adjusted to further personalize performance of the
player.
+1 0
5
4
7
0
8
PROGRAM SEARCH MODE
RANDOM
Î
In this manual, functions that are contained in the
[Expert] menu mode are identified by the
icon.
Expert
Make changes to the [Setup Menu Mode] setting in the
Setup screen General menu.
Audio1 Audio2 Video Language General
Setup Menu Mode Expert
Setup Navigator Basic
Parental Lock – Level 8
7
Use the cursor buttons (5/ ∞) to select a
new setting and press ENTER to set the
new setting in m em ory. Press RETURN or
the cursor button (2) to exit the options
w ithout m aking any changes.
Change menu mode
SETUP
Move
Exit
Settings: Expert
Basic*
8
9
Press RETURN or the cursor button (2) to
go back to the m ain m enu bar to select
another m enu.
* Factory setting
Note
On-screen information only appears if the [OSD Language]
is set to [English] and menu mode is set to [Basic].
Press SETUP to close the Setup screen.
The Setup screen closes.
Note
The next time you press SETUP, you’ll see the menu screen
that you exited from last time.
How to interpret the setting indicator colors in
the Setup screen m enus
When setting up the system, or when making
adjustments, it is convenient to know what settings are
applicable to the different disc formats. When the
settings appear for each menu option, the currently
selected setting appears with the setting indicator
highlighted in one of three colors: blue, green or yellow.
These colors correspond to what formats the menu
option effects as shown in the table below.
Color of indicator
Blue
Disc form at(s)
DVD only
Yellow
Green
DVD / Video CD
All com patible form ats
Note
If a setting applicable only to DVDs is changed while a Video
CD or CD is loaded, a blue DVD icon appears in the upper
right hand corner of the screen to indicate that the setting is
not applicable to the currently loaded disc. The setting will be
effective the next time a DVD is loaded.
24
En
Download from Www.Somanuals.com. All Manuals Search And Download.
DTS Out
Setting the Digital Audio
This player is capable of outputting DTS digital audio for
DVDs recorded in DTS. When this player is connected to
an AV component that has a built-in DTS decoder, select
[DTS]. If your system is not equipped to decode DTS,
select [Off]. Refer to the operating instructions supplied
with your audio components if you are unsure about
compatibility with DTS.
Output To Be Compatible with
Your AV Component
– DVD
This player is capable of digital audio output for Dolby
Digital, DTS, MPEG, and signals with a sampling rate of
96 kHz. Make settings in the Setup screen Audio 1
menu to reflect the capabilities of the components that
you have made digital connections to.
Audio1 Audio2 Video Language General
Dolby Digital Out –
DTS Out
96kHz PCM Out -
Dolby Digital
Off
DTS
Notes
• If you have already completed the Setup Navigator screen
operations, the settings on this page have already been set
by the player.
MPEG Out – MPEG 3 PCM
Change DTS output mode
• If you have made only stereo line connections (analog)
using the supplied audio cord, it is not necessary to make
any changes in this menu.
SETUP
Move
Exit
Settings: Off*
DTS
Dolby Digital Out
* Factory setting
This player is capable of outputting the Dolby Digital
surround sound audio signal. When the player is
connected to an AV component that has a built-in Dolby
Digital decoder, select [Dolby Digital]. This player can
also convert the Dolby Digital signal to a digital Linear
PCM signal, the same digital signal output from a CD.
Select [Dolby Digital 3 PCM] when you have made
connections to an amplifier or receiver with a Dolby Pro
Logic decoder or a Digital Analog Converter (DAC).
Note
If you have made digital audio connections to component(s)
not equipped to decode the DTS digital bitstream, be sure to
select [Off]. If a DTS signal is output without decoding, the
output is digital noise that could potentially cause damage to
your speakers.
96 kHz PCM Out
Audio1 Audio2 Video Language General
This player is capable of outputting digital signals with a
sampling frequency of 96 kHz. If you have made
connections to a component capable of processing this
signal rate, select [96 kHz] for the signal to be output as
is. As some components are incapable of processing
digital signal input with sampling rates of 96 kHz,
selecting [96 kHz 3 48 kHz] compresses the signal to a
standard signal with a sampling rate of 48 kHz.
Dolby Digital Out Dolby Digital
Dolby Digital 3 PCM
DTS Out -
96kHz PCM Out – 96kHz 3 48kHz
MPEG Out – MPEG 3 PCM
Change Dolby Digital output mode
SETUP
Move
Exit
Settings: Dolby Digital*
Dolby Digital 3 PCM
Audio1 Audio2 Video Language General
* Factory setting
Dolby Digital Out –
Dolby Digital
DTS Out – Off
96kHz 3 48kHz
96kHz PCM Out
MPEG Out - 96kHz
Change 96 kHz output mode
Move
SETUP
Exit
Settings: 96 kHz 3 48 kHz*
96 kHz
* Factory setting
Note
On DVDs that contain copy protection, the 96 kHz signal may
only be output from the analog audio jacks.
25
En
Download from Www.Somanuals.com. All Manuals Search And Download.
MPEG Out
Adjusting the Dynamic Range
This player is capable of outputting the MPEG digital
bitstream. When the player is connected to an AV
component that has a built-in MPEG decoder, select the
[MPEG] setting. Otherwise, select [MPEG 3 PCM] to
convert the digital signal to the PCM signal, the digital
signal output from a CD.
of the Audio Soundtrack
Audio DRC stands for Audio Dynamic Range
– DVD
Compression. When Audio DRC is on, soft sounds such
as dialog can be heard more clearly without making loud
sounds even louder. Select from three levels of
compression depending on how much effect you want.
When Audio DRC is set to [Off], there is no effect on
the audio source.
Audio1 Audio2 Video Language General
Dolby Digital Out –
Dolby Digital
DTS Out – Off
Make changes to the [Audio DRC] setting in the Setup
screen Audio 2 menu.
96kHz PCM Out – 96kHz 3 48kHz
MPEG Ou
t
MPEG
MPEG 3 PCM
Change MPEG audio output mode
SETUP
Audio1 Audio2 Video Language General
Move
Exit
Audio DRC High
Medium
Low
Off
Settings: MPEG
MPEG 3 PCM*
Dynamic playback at low volume
* Factory setting
SETUP
Move
Exit
Settings: High
Expert
Digital Out
– DVD/ Video CD/ CD
(maximum compression of audio source)
Medium
Depending on your preferences and the type of
connections made, you may opt not to have the digital
audio signal output at all. When this setting is set to
[Off] there is no signal output from the digital audio
output jacks.
Make changes to the [Digital Out] setting in the Setup
screen Audio 1 menu in the [Expert] menu mode (page 24).
(moderate compression of audio source)
Low
(very little compression of audio source)
Off*
* Factory setting
Note
Audio DRC is only effective with Dolby Digital audio sources.
Audio1 Audio2 Video Language General
Dolby Digital Out –
DTS Out –
Dolby Digital
Off
96kHz PCM Out – 96kHz>48kHz
MPEG Out – MPEG 3 PCM
Digital Out On
Off
SETUP
Move
Exit
Settings: On (Digital bitstream is output)*
Off (Digital bitstream is not output)
* Factory setting
26
En
Download from Www.Somanuals.com. All Manuals Search And Download.
When view ing a w ide screen TV or m onitor
DVD screen size form at Setting and Appearance
Setting the TV Screen Size
– DVD
The width-to-height ratio of conventional TVs is 4:3,
while the width-to-height ratio of wide screen and
high-definition TVs is 16:9. This width-to-height ratio is
called the aspect ratio.
Wide screen form at DVD
Please note that there are some
wide screen letter box formats
that place black bars at the top
and bottom of the screen. This is
not a malfunction.
When viewing software recorded in different aspect
ratios, the image’s height to width ratio can be switched
to match the TV or monitor being used.
“Wide” setting
Standard screen form at DVD
When viewing a standard screen
format DVD on a wide screen
TV, black bars may be
automatically placed at the side
of the screen to adjust to the
DVD format.
Make changes to the TV screen size in the [TV Screen]
setting in the Setup screen Video menu. Please note
that changes to the [TV Screen] setting cannot be made
when a disc is playing. Stop playback of the disc before
attempting to make any changes.
“Wide” setting
Audio1 Audio2 Video Language General
TV Screen 4:3(Letter Box)
Video Out —4:3(Pan&Scan)
16:9(Wide)
Standard screen form at DVD
(unnatural stretched effect)
If you are viewing a standard
screen format DVD on a wide
screen TV, the picture may
appear ‘stretched’ on the
screen. To remedy this
Select your display preference
SETUP
Move
Exit
condition, change your wide
screen TV to display a standard
(4:3) screen. Refer to the
instructions supplied with your
wide screen TV or monitor for
more information.
Settings: 4:3 (Letter Box)
4:3 (Pan & Scan)
16:9 (Wide)*
“Wide” setting
* Factory setting
Notes
• If [Standard (4:3)] is selected in the Setup Navigator
screen, [4:3 (Letter Box)] is selected on this screen. If you
prefer the pan&scan format, change the settings on this
screen.
• Whether the aspect can be switched or not depends on the
disc. Please refer to the information written on the disc
jacket, etc.
• Some discs may not include the screen format selected in
the [TV Screen] setting. When this occurs, the standard TV
screen format available on the disc is automatically
selected.
When view ing a standard size TV or m onitor
DVD screen size form at Setting and Appearance
Wide screen form at DVD
The Letter box presentation
places black bars at the top and
bottom portions of the screen to
provide the full wide screen
presentation of a movie on a
standard TV (4:3 aspect ratio).
“Letter Box” setting
Wide screen form at DVD
The Pan & Scan presentation
crops both sides of the wide
screen presentation to use the
full standard TV screen.
Differences in screen sizes and DVD form ats
The number of screen size formats currently available
can be somewhat confusing. If set incorrectly, the video
presentation may not appear as it should. The following
diagrams and descriptions are intended to help you set
your TV screen size in a way that will allow you to fully
enjoy the digital video of DVD.
The settings in the [TV Screen] setting are perhaps
most applicable when the DVD you are watching is
programmed in the wide screen format. If you have a
standard TV, select either [4:3 (Letter Box)] or [4:3 (Pan
& Scan)] based on your personal preference. If you have
a wide screen TV, select [16:9 (Wide)].
“Pan & Scan” setting
Standard screen form at DVD
If you have a standard TV, the
standard screen format will be
presented regardless of the
setting.
Any setting
Wide screen form at DVD
(unnatural squeezed effect)
If you are viewing a wide screen
format DVD on a standard TV
and the [TV Screen] setting is
set to [16:9 (Wide)], the picture
may appear ‘squeezed’ on the
screen. To remedy this
condition, select either [4:3
(Letter Box)] or [4:3 (Pan &
Scan)].
“Wide” setting
27
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the on-screen display
Setting the Video Output
Format for AV CONNECTOR
Connections
When connections are made to the AV CONNECTOR on
the player via a SCART cable, it is possible to select the
video format that is compatible with your TV or monitor.
Select [Video] to have a composite video signal output,
[S-Video] to have an S-video signal output, and [RGB] to
have an RGB signal output. For more information on
which format is most appropriate, refer to the
instructions supplied with your TV or monitor.
Make changes to the [Video Out] setting in the Setup
screen Video menu.
Expert
on or off
If you would rather not have the operation indicators
(Play, Stop, Resume, etc.) and other messages displayed
on the screen, it is possible to turn them off in the [On
Screen Display] setting in the Setup screen Video
menu in the [Expert] menu mode (page 24).
Audio1 Audio2 Video Language General
TV Screen – 16:9(Wide)
Video
Video Out –
Still Picture – Field
On Screen Display
On
OSD Position —
Off
Angle Indicator – On
SETUP
Move
Exit
Audio1 Audio2 Video Language General
TV Screen – 16:9(Wide)
Settings: On*
Video Out
Video
S-Video
RGB
Off
* Factory setting
Set AV CONNECTOR video format
SETUP
Move
Exit
Setting the position of the
on-screen display
Settings: Video*
S-Video
Expert
When watching conventional software on a wide screen
TV, the operation display is at the very top of the screen,
and may be difficult to see. Changing the position of the
display lets you see operation indicators clearly even on
a wide screen TV.
Make changes in the [OSD Position] in the Setup
screen Video menu in the [Expert] menu mode (page
24).
RGB
* Factory setting
Selecting the type of paused
image to display
This function lets you view a clear still-image when DVD
playback is paused.
Expert
Audio1 Audio2 Video Language General
Make changes in the [Still Picture] setting in the Setup
screen Video menu in the [Expert] menu mode (page
24).
TV Screen – 16:9(Wide)
Video
Video Out –
Still Picture – Field
On Screen Display – On
OSD Position
Wide
Normal
Angle Indicator-
Audio1 Audio2 Video Language General
SETUP
Move
Exit
TV Screen – 16:9(Wide)
Video Out –
Video
Still Picture Field
On Screen Display
–
Frame
Settings: Wide
Norm al*
OSD Position –
Auto
Angle Indicator – On
SETUP
Move
Exit
* Factory setting
Settings: Field
(Picture shake will be eliminated during a
paused picture.)
Fram e
(Select to obtain higher picture quality.)
Auto*
(Selects [Field] or [Fram e] automatically
according to the disc.)
* Factory setting
28
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the angle indicator on and
off
Viewing from a Desired
Camera Angle (Multi-Angle)
– DVD
Expert
When a picture recorded in different angles is played
back
is displayed on the screen. This setting lets you
see clearly whether the playback picture is recorded in
multiple angles or not.
Turn the angle indicator on or off in the [Angle
Indicator] setting in the Setup screen Video menu in
the [Expert] menu mode (page 24).
You can select a camera angle when viewing DVDs with
the multi-angle option.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
ANGLE
REP EAT
ANGLE
AUDIO
S ETUP
SUB TITLE
Audio1 Audio2 Video Language General
REP EAT
A-B
M ENU TOP MENU
TV Screen – 16:9(Wide)
Video
Video Out –
RETURN
DISPLA
Y
5
¶
¶
Still Picture – Field
On Screen Display – On
OSD Position – Normal
Angle Indicator
On
Off
SETUP
Move
Exit
Press ANGLE during playback.
Settings: On* (
is displayed)
The camera angle changes each time you press the
button.
Off (Not displayed)
* Factory setting
ANGLE
: 1/4
ANGLE
: 2/4
Note
Even when the [Angle Indicator] setting is set to [Off], the
indicator in the display panel of the player lights during
multi-angle playback. Therefore, it is possible to know when
the multi-angle function can be used without having to
display the icon on the screen.
\
|
»
«
ANGLE
: 3/4
ANGLE
: 4/4
Notes
• You can use the Multi-Angle function only with discs
featuring recordings of images shot from different camera
angles.
• During Multi-Angle playback, the
display lights.
indicator in the
• For some discs, selection can be made using the DVD
menu. In this case, press MENU to display the DVD menu
screen and then make your selection.
To check w hether or not a disc is recorded w ith
angles:
The jacket of discs that are recorded with angles will be marked
with
. When locations on discs that are recorded with angles
indicator can be displayed.
are played back, the
To cancel the angle mark, set [Angle Indicator] to [Off] in the
Setup screen Video menu described in the section below.
29
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the
Language
Options
Setting Language and Subtitle
Preferences in the Setup
Screen Menus
The Setup screen Language menu contains a number of
settings related to the audio and subtitle language
preferences.
DVDs have the capacity to contain a great deal of audio
information, which includes the ability to hold up to 8
different language tracks and subtitle information in as
many as 32 different languages. This section outlines
the variety of audio language and subtitle options
available with this player.
Please note that changes to the settings in the
Language menu in this section cannot be made when a
disc is playing. Stop playback of the disc before
attempting to make any changes.
Selecting an audio language
preference
Please note that if you have completed the Setup
Navigator, the audio and subtitle language options have
automatically been set in accordance with the OSD
language (the language that appears on the screen).
The audio language that you normally listen to can be
selected from the various audio languages on a DVD.
Even when the audio language is changed during
playback by pressing AUDIO, the language selected at
this setting will be selected as the default when the DVD
is changed.
Notes
•
DVDs differ in content and do not all contain multiple
language or subtitle information. Therefore making settings
in this section may have no effect on some DVDs.
If you have already completed the Setup Navigator screen
operations, the settings on this page have already been set
by the player.
Make changes to the [Audio Language] setting in the
Setup screen Language menu.
•
Audio1 Audio2 Video Language General
English
OSD Language -
Audio Language - French
German
Subtitle Language -
Italian
Spanish
Other
Auto Language -
Setting the on-screen display
(OSD) language
This setting is used to establish the language that
operation indicators and on-screen messages and
operations display. Change this setting in the Setup
screen Language menu [OSD Language] setting.
Setup audio language
SETUP
Move
Exit
Settings: English*
French
Germ an
Italian
Spanish
Other
Audio1 Audio2 Video Language General
OSD Language English
Audio Language -
français
Subtitle Language -
Deutsch
Auto Language -
Italiano
(For details on how to select other languages,
Español
Select the On Screen Language
see ‘When “Other” is selected’ on page
33.)
SETUP
Move
Exit
*Factory setting
Settings: English*
français
Deutsch
Italiano
Español
* Factory setting
Notes
•
The languages that can be selected may be different from
those shown above.
•
The [OSD Language] setting is factory set to [English]. If
you want English to be displayed, it is not necessary to
adjust this setting.
30
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Audio Type – Video CD/CD
Changing the Audio Language
(Multi-Language Function)– DVD
Dolby Digital, PCM, and other audio data can be
recorded on DVDs in a number of languages or audio
tracks, letting you choose the desired language or audio.
For enjoyment of karaoke or similar format Video CDs
and CDs, it is possible to select stereo audio, or either
right or left channel mono depending on the
requirements of the source.
Press AUDIO repeatedly during playback to
sw itch the audio type.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
Audio output changes from [1/ L] (Left channel) to
[2/ R] (Right channel) to [Stereo].
REP EAT
ANGLE
AUDIO
S ETUP
SUB TITLE
AUDIO
REP EAT
A-B
M ENU TOP MENU
RETURN
DISPLAY
5
¶
¶
Audio
: 1/L
2
NEXT
P REV
¢
4
5
¶
¶
P LAY
3
PAUS E
8
S TOP
7
¶
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
+1 0
5
4
7
0
8
PROGRAM SEARCH MODE
RANDOM
Î
Audio
: 2/R
Press AUDIO repeatedly to select the desired
language.
Audio
: Stereo
Pressing AUDIO once displays the currently selected
language. Subsequent presses rotates through the audio
languages available on the DVD.
Dolby Digital
5.1CH
Dolby Digital
5.1CH
: 2 Spanish
Audio
: 1 English
Audio
Note
With karaoke and other discs, set the appropriate audio type
for singing and accompaniment after referring to information
on the disc jacket or accompanying material.
Notes
• You cannot switch languages if there is only one language
recorded on the disc.
• Switching the audio language may not be possible with
some titles. In this case, the
mark is displayed.
• For some titles, selection can be made using the DVD
menu. In these cases, press MENU to display the DVD
menu screen and then make your selection.
31
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a subtitle language
preference
Selecting a Subtitle Language
(Multi-Language Subtitles)
– DVD
The subtitle language that you will normally display can
be selected from the subtitles programmed on a disc.
Even when the subtitle language is changed during
playback by pressing SUBTITLE, the language selected
at this setting will be selected when the disc is changed.
Make changes to the [Subtitle Language] setting in the
Setup screen Language menu.
You can select a desired subtitle language with DVDs
that have subtitle data in multiple languages recorded on
them.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
SUBTITLE
Audio1 Audio2 Video Language General
REP EAT
ANGLE
AUDIO
S ETUP
SUB TITLE
English
OSD Language -
French
Audio Language -
REP EAT
A-B
M ENU TOP MENU
Subtitle Language German
Italian
Spanish
Auto Language -
RETURN
DISPLA
Y
5
¶
¶
Other
Setup disc's subtitle language
2
SETUP
Exit
Move
NEXT
P REV
¢
4
5
¶
¶
P LAY 3
¶
PAUS E 8
S TOP
7
Settings: English*
French
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
Germ an
+1 0
0
5
4
7
Italian
Spanish
Other
8
PROGRAM SEARCH MODE
RANDOM
Î
(For details on how to select other languages,
see ‘When “Other” is selected’ on page 33.)
*Factory setting
Press SUBTITLE repeatedly during playback.
Pressing SUBTITLE once displays the currently selected
subtitle language. Subsequent presses rotates through
the subtitle languages available on the DVD.
Subtitle :1 English
Subtitle :2 Spanish
HELLO!
HOLA!
Notes
• The subtitle language cannot be switched if the subtitle
language is not recorded, or if only one language is
recorded.
• Switching the subtitle language may not be possible with
some discs. In this case, the
mark will be displayed.
• To clear subtitles during playback, press SUBTITLE and
then press CLEAR, or press SUBTITLE until [Off] appears.
• For some discs, subtitle language selection can be made
using the menu on the DVD. In this case, press MENU to
display the DVD menu screen and then make your
selection.
32
En
Download from Www.Somanuals.com. All Manuals Search And Download.
When “Other” is selected
If you select [Code], use the cursor buttons
(5/ ∞) to input the num bers of the input
code.
Use the cursor buttons (2/3) to change the
position of the cursor. You can also use the
num ber buttons to enter the code.
When you want to select one of the 136 languages as
the main audio language, follow the steps below when
the following screen appears.
A language code list can be found on page 50.
Audio1 Audio2 Video Language General
Code (0~2)
OSD Language -
English
Audio Language
French
Subtitle Language - German
Auto Language -
Italian
1
0
0
1
Spanish
Other
Setup audio language
SETUP
Exit
Move
ENTER Select
4
Press ENTER to set the new language.
To exit the screen without making any changes,
press RETURN.
REP EAT
ANGLE
AUDIO
S ETUP
SUB TITLE
REP EAT
A-B
M ENU TOP MENU
RETURN
DISPLAY
5
¶
¶
2
1, 2, 3
1, 4
NEXT
P REV
¢
Setting Auto Language to control
subtitle and audio language based
on program content
4
5
¶
¶
P LAY
3
PAUS E
8
S TOP
7
¶
1REV FW D
¡
eS TEP / S LOW
E
C
EAR
2
3
1
When the Auto Language function is used, foreign
movies are shown with the original audio soundtrack and
subtitles in the language selected in the [Subtitle
Language] menu option. Domestic films are shown with
the original audio soundtrack and no subtitles. (This
setting may not be effective with all DVD discs.)
Make changes to the [Auto Language] setting in the
Setup screen Language menu.
1
Use the cursor buttons to select [Other]
and press ENTER.
The language selection screen appears.
Audio1 Audio2 Video Language General
Audio Language
Audio1 Audio2 Video Language General
Code (0~2)
List of Languages
OSD Language – English
Audio Language – English
Subtitle Language – Spanish
ja: Japanese
1
0
0
1
Setup audio language
Move
+/ –
Auto Language
On
RETURN Return
SETUP
Off
ENTER
Select
Exit
Play dialog, etc. in original language
Subtitles ON with foreign audio.
SETUP
Move
Exit
2
3
Use the cursor buttons (2/ 3) to select
Settings: On*
Off
either [List of Languages] or [Code].
* Factory setting
If you select [List of Languages], use the
cursor buttons (5/ ∞) to select the
language.
Note
The Auto Language function operates only when this
function is set to [On], and the language set for the [Audio
Language] and [Subtitle Language] settings is the same.
For languages which are only shown as a code,
please refer to ‘Language Code List’ on page 50.
List of Languages
ja: Japanese
33
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a DVD m enu language
preference
Selecting subtitles, assist subtitles
or no subtitles
Expert
Expert
In addition to containing different audio languages, DVD
may also contain menu screens in different languages as
well. Setting a DVD language preference, sets the
selected language as a default when DVDs with menu
information in that language are encountered.
Selecting [w / Subtitle Language] automatically assigns
the language selected in the [Subtitle Language]
setting.
Use this function to turn the subtitles on or off.
Additionally, some DVDs provide assist subtitles that
provide additional explanations of scenes in addition to
the standard subtitles for viewers who are hard of
hearing. Select [Assist Subtitle] to display these
subtitles on DVDs where this function is offered.
Make changes to the [Subtitle Display] setting in the
Setup screen Language menu in the [Expert] menu
mode (page 24).
Make changes to the [DVD Language] setting in the
Setup screen Language menu in the [Expert] menu
mode (page 24).
Audio1 Audio2 Video Language General
OSD Language – English
Audio Language – English
Subtitle Language – Spanish
Auto Language – On
Audio1 Audio2 Video Language General
OSD Language – gi
w/ Subtitle Language
Audio Language –
DVD Language -
On
English
Subtitle Language -
Subtitle Display Off
Assist Subtitle
Subtitle Off - Selected title
French
Auto Language -
German
DVD Language Italian
Subtitle Display -
SETUP
Move
Exit
Spanish
Other
Subtitle Off -
SETUP
Move
Exit
Settings: On*
Off
Settings: w / Subtitle Language*
Assist Subtitle
English
French
* Factory setting
Germ an
Italian
Notes
• If there is no subtitle information recorded on the DVD, no
subtitles are displayed even if this function is set to [On].
• This setting serves as a default as whether or not to display
subtitles. Even if this option is set to [Off], subtitles can be
displayed by pressing SUBTITLE. Similarly, if this option is
set to [On], the subtitles can be turned off by pressing
SUBTITLE and then CLEAR.
Spanish
Other
(For details on how to select other languages,
see ‘When “Other” is selected’ on page 33.)
* Factory setting
Expert
Forcing subtitles to be displayed
Notes
Even when the subtitles are turned off, some DVDs will
nevertheless display them on the screen. This setting
allows you to select the language of the subtitles to be
displayed with this type of DVD.
• The menu settings may look different from the one shown
above.
• If this function is not effective, the languages that can be
selected may also be selected in the DVD menu. Press
MENU to open the DVD menu and make your selection
accordingly.
Select [With Audio] to display the subtitles in the same
language as the currently selected [Audio Language].
Select [Selected Subtitle] to display the subtitles in the
language set in the [Subtitle Language] setting.
Make changes to the [Subtitles Off] setting in the Setup
screen Language menu in the [Expert] menu mode
(page 24).
Audio1 Audio2 Video Language General
OSD Language – English
Audio Language – English
Subtitle Language – Spanish
Auto Language – On
DVD Language – English
With Audio
Subtitle Display -
Subtitle Off Selected Subtitle
SETUP
Move
Exit
Settings:With Audio
Selected Subtitle*
* Factory setting
34
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering the passw ord
When you select either [Level Change] or [Passw ord
Change], it is necessary to enter the password (4-digit
code number). Use the following steps at any time you
are asked to enter or confirm your password.
Advanced
Functions
1
Use the cursor buttons (5/ ∞) or the
num ber buttons to select a num ber
betw een 0 and 9.
This player is compatible with DVD, Video CD, and CD
disc formats. Users already familiar with Video CD or CD
will already be familiar with some of the functions the
player is capable of performing. With DVD, an even
greater number of possibilities and functions are
available.
You can also use the num ber buttons to enter the
numbers directly. When entering your password for
the first time, or changing it, you will be asked to
reenter your password. When using the num ber
buttons to confirm the password, the numbers
appear as asterisks, and the cursor advances
automatically to the next position.
Note
DVDs differ in content and do not all contain the same
information. Therefore some functions in this section may
not work or have no effect on some DVDs.
Audio1 Audio2 Video Language General
Parental Lock: Register Code Number
Enter 4—Digit Code
Move
Setting the Parental Lock
+/ –
RETURN Return
SETUP
Exit
Level
– DVD
This player lets you set the Parental Lock if the DVD has
a parental lock level recorded on it. With Parental Lock
capable discs, you can block access to material you feel
is inappropriate for your children. Refer to the DVD disc
jacket and the accompanying documentation to see if a
particular disc contains a parental lock level.
Make changes to the [Parental Lock] setting in the
Setup screen General menu. Please note that changes
to the Parental Lock level cannot be made when a disc is
playing. Stop playback of the disc before attempting to
make any changes.
2
Use the cursor buttons (2/ 3) to m ove the
cursor to a different position in the
passw ord.
When all four numbers of the passoword have been
entered, ENTER appears on the screen.
Audio1 Audio2 Video Language General
Parental Lock: Register Code Number
ENTER
1
0
1
9
Enter 4—Digit Code
Audio1 Audio2 Video Language General
Move
+/ –
Setup Menu Mode – Basic
Setup Navigator
RETURN
SETUP
Exit
Return
Parental Lock Level Change
Password Change
Setup viewing restrictions
3
Press ENTER to set the new passw ord.
The password is entered.
SETUP
Move
Exit
Settings: Level Change
(For information, refer to “Setting the
Parental Lock level” on the following page.)
Note
Be sure not to forget your password. If you should forget it,
reset the system, and enter a new password. To reset the
system, see ‘Resetting the Player to System Settings’
(page 47). Please note that this procedure resets the system,
and clears all saved settings, not just the password.
Passw ord Change
(For information, refer to “Changing the
password” on the following page.)
When a DVD w ith a set Parental Lock level is
loaded
Playback cannot be started until the code number has been
correctly input by using the cursor buttons (2/3/5/∞) or the
num ber buttons, and ENTER has been pressed.
35
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Parental Lock level
Changing the passw ord
Change the Parental Lock level to a higher or lower level
according to the settings printed on the DVD disc jacket
or accompanying documentation. If you use the
Condition Memory function to save the settings for a
particular disc, the Parental Lock level is saved as well.
Because it is saved in memory, Parental Lock levels can
be set for individual discs according to their content
rather than a set level for all DVDs.
Change your password whenever you feel it is
necessary. However, if you forget your existing
password, you cannot enter this screen to change it.
Audio1 Audio2 Video Language General
Setup Menu Mode
Setup Navigator
–
Basic
Parental Lock Level Change
Password Change
Setup viewing restrictions
Audio1 Audio2 Video Language General
ENTER
SETUP
Exit
Move
Select
Parental Lock: Level Change
1
Level
2
3
4
5
6
7
8
Set Parental Lock
1
Select [Passw ord Change] in the [Parental
Lock] setting and press ENTER.
RETURN
SETUP
Return
Exit
Move
ENTER
Select
The screen changes to the password input screen.
To enter the password, refer to ‘Entering the
password’ on the previous page.
If you have not yet set a password, you cannot
select this setting. Establish a password by
selecting [Level Change] first.
1
Select [Level Change] in the [Parental
Lock] setting and press ENTER.
The screen changes to the password input screen.
If you have not yet set a password, you will be
asked to do so at this time. To enter the password,
refer to ‘Entering the password’ on the previous
page.
2
3
Use the cursor buttons (2/ 3/ 5/ ∞) or the
num ber buttons to enter the new
passw ord.
2
3
Use the cursor buttons (2/ 3) to adjust the
Parental Lock level.
The lock icons appear “unlocked” up to the
selected level to indicate that access is available.
When the new passw ord has been
entered, press ENTER.
The new password is set and the screen returns to
the General menu screen. To go back to the
General menu screen without making any changes,
press RETURN.
Press ENTER to set the new level.
The new Parental Lock level is set and the screen
returns to the General menu screen. To go back to
the General menu screen without making any
changes, press RETURN.
Changing the Background
Expert
Color of the Screen
You can select a blue or black background to appear
when the player is in the stop mode.
Make changes to the [Background Color] setting in the
Setup screen General menu in the [Expert] menu mode
(page 24).
Audio1 Audio2 Video Language General
Setup Menu Mode
Setup Navigator
–
Expert
Parental Lock – Level 8
Background Color
Black
Blue
SETUP
Move
Exit
Settings: Black
Blue*
*Factory setting
36
En
Download from Www.Somanuals.com. All Manuals Search And Download.
View ing a still fram e
Still Frame/Slow Play/Frame
Advance Playback
– DVD/Video CD
Press PAUSE 8.
The video images on DVD and Video CD can be viewed
as a still frame, played back at slow speeds and even
advanced frame by frame.
When viewing a DVD, if the paused picture shakes,
select the [Field] setting in the Setup screen Video
menu [Still Picture] setting as described in the section
on page 28.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
REP EAT
To return to norm al playback
When viewing a still frame playback, pressing PAUSE 8
or PLAY 3 restores normal playback operation.
AUDIO
S ETUP
SUB TITLE ANGLE
REP EAT
A-B
M ENU TOP MENU
RETURN
DISPLAY
5
¶
¶
View ing slow playback
PLAY 3
NEXT
P REV
¢
4
5
¶
¶
P LAY
3
PAUS E
8
S TOP
7
Press and hold STEP/ SLOW E during
¶
PAUSE 8
1REV FW D
¡
eS TEP / S LOW
E
playback.
STEP/ SLOW
e/ E
CLEAR
2
3
6
9
1
• Slow playback is engaged.
+1 0
• During slow playback, the speed of playback can be
adjusted from 1/2 normal playback speed to 1/16
normal playback speed in four steps using
STEP/ SLOW e and E.
5
4
7
0
8
PROGRAM SEARCH MODE
RANDOM
Î
1/ 16 – 1/ 8 – 1/ 4 – 1/ 2
Press and hold STEP/ SLOW e during DVD
playback.
• Slow playback in the reverse direction is engaged.
• In the reverse direction, the playback speed cannot be
adjusted.
To return to norm al playback
When viewing still frames or slow playback, pressing
PLAY 3 restores normal playback operation.
Fram e by fram e advance playback:
View ing one fram e at a tim e
1
2
Press PAUSE 8.
Press STEP/ SLOW e or E.
STEP/ SLOW E: The picture advances one frame each
time the button is pressed.
STEP/ SLOW e: The picture backs up a DVD a few
frames each time the button is
pressed.
To return to norm al playback
When viewing frame by frame playback, pressing
PLAY 3 restores normal playback operation.
Notes
• There is no sound when viewing still frames or slow
playback, or when advancing one frame at a time.
• Still frame, slow play, or frame advance playback may not
be possible with certain titles. In this case, the
displayed.
mark is
37
En
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Press SEARCH MODE repeatedly to select
the type of search.
The type of search changes which each press as
follows.
Searching for a Title, Chapter,
Track, or Location on a Disc
– DVD/Video CD/CD
3 Title
3 Chapter/ Track
This player offers different ways of accessing the
information on a DVD, Video CD, or CD. Using SEARCH
MODE, you can search for titles or chapters on a DVD,
tracks on a Video CD or CD, and even select the point in
time to start playback.
Off 2
Tim e 2
Press the num ber button(s) of the desired
title, chapter or track or of the specific tim e
w here you w ould like to begin playback.
•
•
•
To select number 3, press 3.
To select number 10, press 1 and 0
To select number 87, press 8 and 7.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
REP EAT
ANGLE
AUDIO
S ETUP
SUB TITLE
REP EAT
A-B
M ENU TOP MENU
When perform ing a tim e search:
RETURN
DISPLA
Y
•
To select 21 minutes, 43 seconds, press
5
¶
¶
2, 1, 4, and 3.
2
•
To select 1 hour, 14 minutes, press 7, 4, 0,
and 0.
NEXT
P REV
¢
4
5
¶
¶
3
P LAY
3
PAUS E
8
S TOP
7
¶
3
Press PLAY 3.
Playback of the selected title, chapter or track
starts. When a time search is performed, playback
begins at the appointed time.
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
+1 0
5
4
7
2
+10
0
8
PROGRAM SEARCH MODE
RANDOM
Î
1
Notes
• For some discs, selection can be made using the top menu
on the DVD. In this case, press TOP MENU to display the
menu screen and then make your selection.
• With some DVDs, the search operation may not be
possible and may stop shortly after being performed. In
this case, the
mark is displayed.
• Time search is not possible with CDs.
• When performing DVD time search, playback may start
from a slightly different time than that specified.
• Time search is not possible during when the disc is
stopped.
• Search using time search is not possible during PBC
playback of Video CDs.
To perform a direct title or chapter/ track
search using the num ber buttons
Press the num ber buttons while the disc is stopped to
select a title number.
Press the num ber buttons while the disc is playing to
select a chapter or track.
•
•
•
To select number 3, press 3.
To select number 10, press +10 and 0.
To select number 37, press +10, +10, +10 and 7.
Note
Direct search cannot be performed for title, chapter, or track
numbers 20 or higher. To search for titles, chapters, or tracks
with numbers 20 or higher, use the title or chapter/track
search procedures using SEARCH MODE as described on
this page.
38
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat play of a specified section
Repeat Play
– DVD/Video CD/CD
You can repeat an entire title, chapter or track, or just a
part.
Press REPEAT A–B at the beginning and end of
the section you w ant to repeat.
• When REPEAT A–B is pressed a second time, the
disc returns to the location where REPEAT A–B was
pressed first and plays the selected section
repeatedly.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
REPEAT
REP EAT
A-B
M ENU TOP MENU
• You can only perform A–B repeat within the same
title, chapter, or track.
REPEAT
A-B
RETURN
DISPLAY
5
¶
¶
NEXT
P REV
¢
4
5
¶
¶
To cancel A–B repeat play
P LAY 3
PAUS E 8
S TOP
7
Press CLEAR. Playback continues, but the repeat
function is canceled.
¶
PLAY 3
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
CLEAR
+1 0
0
5
4
7
8
Return to a specified location on a
disc
PROGRAM SEARCH MODE
RANDOM
Î
1
2
Press REPEAT A–B at the desired location.
When you w ant to return to the specified
location, press PLAY 3.
Repeat play of a chapter/ track
To clear the specified location
Press CLEAR to cancel repeat play or to clear the
specified location that was set using REPEAT A–B.
Press REPEAT once during playback of the
chapter or track you w ant to repeat.
Notes
• With some DVD discs, there may be times when repeat
Repeat play of a title
playback is not possible. In these cases, the
appear on the screen.
mark will
• With Video CDs, repeat play is not possible when the menu
is displayed (PBC playback). To perform repeat play, start
playback without displaying a menu by pressing the track
number to be repeated when the disc is stopped, and then
press REPEAT.
Press REPEAT tw ice during playback of the
title you w ant to repeat.
•
With DVDs, the title continues playing until the end,
and then playback starts once more from the
beginning of that title.
• If you switch camera angle during repeat play, repeat play
is cancelled.
•
With CDs and Video CDs, a disc is considered a single
title, so the entire disc is repeated.
To repeat a program
Press REPEAT once during program playback to repeat
the program.
To cancel repeat play
Press CLEAR. Playback continues, but the repeat
function is canceled.
39
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Random playback of chapters
w ithin one title – DVD
Random Play– DVD/Video CD/CD
Play titles, chapters, or tracks on a disc in random order.
Press RANDOM once, then press ENTER or
PLAY 3.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
“Random Chapter” appears on the screen, and
chapters within the title will be played back in random
order.
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
REP EAT
A-B
M ENU TOP MENU
RETURN
DISPLAY
5
¶
¶
2
ENTER
NEXT
P REV
Random playback of titles – DVD
¢
4
5
¶
¶
NEXT ¢
PREV 4
P LAY 3
PAUS E 8
S TOP
7
¶
PLAY 3
1REV FW D
¡
eS TEP / S LOW
E
Press RANDOM tw ice, then press ENTER or
CLEAR
2
1
3
6
9
PLAY 3.
CLEAR
+1 0
0
5
4
7
“Random Title” appears on the screen, and titles will
8
be played back in random order.
PROGRAM SEARCH MODE
RANDOM
Î
RANDOM
Random playback of tracks
– Video CD/CD
Press RANDOM.
“Random ” appears on the screen, and random playback
begins.
To change titles, chapters, or tracks during
random play
•
Press NEXT ¢ and the next randomly selected track
starts playing.
•
Press PREV 4 and playback of the current track
starts again from the beginning.
To stop random play
Press CLEAR. This returns you to normal playback of
chapters/tracks in order from the chapter/track currently
playing.
Notes
• With Video CDs, random play is not possible during
playback when the menu is displayed (PBC playback). To
perform random play, start playback without displaying a
menu by pressing a track number button while in the stop
mode, and then press RANDOM.
• Random play of programmed chapters/tracks is not
possible.
• In the case of DVDs, random playback may not be possible
with some discs.
• Repeat playback of random playback is not possible. In
these cases, the
mark will appear on the screen.
40
En
Download from Www.Somanuals.com. All Manuals Search And Download.
4
In the program w indow , use the num ber
buttons to enter the num bers of the titles
or chapters in the order you w ant to
program them in.
Playback in a Desired Order
(Program Play)– DVD/Video CD/CD
The titles and chapters within a title on a DVD and
similarly the tracks on a Video CD or CD can be arranged
to play in the order you want.
•
To program DVD titles/chapters 9, 7, and 18 in
order, press 9, 7, +10 and 8.
Program m ing DVDs
Program Chapter
Current:
Program Chapter ProgramTitle
ProgramTitle
Title
2(/20)
A program with a maximum of 24 steps can be
memorized.
Current:
Title
Title
7
Chapter
1
1
(Chapter 1~ 18)
09 07 18
09 07 18
Program Memory – Off
Program Memory – Off
OPEN/
CONDITION CLOSE
MEMORY
Move ENTER Play
ENTER
PROGRAM
PROGRAM
Exit
Move
Play
Exit
LAST
MEMORY
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
REP EAT
A-B
M ENU TOP MENU
5
Press ENTER or PLAY 3.
RETURN
DISPLA
Y
5
¶
¶
•
•
Playback starts in the set order.
Press PROGRAM to return to the previous
display. The program will not begin until PLAY 3
is pressed.
2
2, 3
5
NEXT
¢
P REV
4
5
¶
¶
P LAY
3
PAUS E
8
S TOP
7
¶
STOP 7
5
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
CLEAR
To program a pause in a program
+1 0
5
4
7
4
Press PAUSE 8 instead of a num ber button.
“8” appears on the screen and the pause can be
programmed.
0
8
PROGRAM SEARCH MODE
RANDOM
Î
A pause cannot be programmed as the first or last
position in a program, and two or more pauses cannot
be programmed in succession.
1
To delete a num ber:
Use the cursor buttons (5/∞/2/3) to highlight the
incorrect number and then press CLEAR.
The number is deleted. If the number was before
another number, the later numbers are reordered
automatically.
1
Press PROGRAM.
The Program screen appears.
To insert a num ber:
Program Chapter
Program Chapter ProgramTitle
ProgramTitle
Title
2(/20)
Current:
Title
Title
Current:
7
Chapter
1
Use the cursor buttons (5/∞/2/3) to highlight the
number to be placed after the new number and then
press the num ber button(s) of the number to be
inserted.
1
(Chapter 1~ 18)
Program Memory – Off
Program Memory – Off
Move
ENTER Play
Move ENTER Play
PROGRAM Exit
PROGRAM
Exit
The new number is inserted before the previously
selected number.
To stop program play
Press STOP 7.
2
3
Use the cursor buttons (2/ 3) to select
either Chapter or Title program .
Once the program type is selected. Use the
cursor button (∞) to enter the program
w indow .
When [Program Chapter] is selected, you must
also select what title the chapters to be
programmed are in. Use the cursor button (5) to
highlight “Title” and then use the num ber buttons
to enter the title number to be used.
Notes
• When programming chapters, chapters not programmed
may appear on the screen. This is not a malfunction.
• Programming may not be possible with certain DVD discs.
On these types of discs, the
mark will appear on the
screen when programming is attempted.
• Only chapters within the same title can be programmed
during chapter programming.
41
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Program m ing Video CDs, CDs
Additional program m ing options
– DVD/Video CD/CD
A program with a maximum of 24 steps can be
memorized.
After you have made a program, it is then possible to
confirm, add, or clear the contents of the program.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
To confirm the contents of a program :
REP EAT
ANGLE
AUDIO
S ETUP
SUB TITLE
On a CD or Video CD track program, press PROGRAM
to confirm. The program screen displays the current
program.
REP EAT
A-B
M ENU TOP MENU
RETURN
DISPLAY
5
¶
¶
On a DVD, select the program type (title or chapter) with
the cursor buttons (2/3). The current DVD title or
chapter program can then be confirmed on the
appropriate program screen.
2
Cursor
buttons
3
NEXT
P REV
¢
4
5
¶
¶
P LAY
3
PAUS E
8
S TOP
7
¶
3
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
To add to a program :
1 Press PROGRAM.
CLEAR
+1 0
5
4
7
2
0
8
2 Press a num ber button to add a new title, chapter, or
PROGRAM SEARCH MODE
track at the end of the program.
RANDOM
Î
3 Press PROGRAM to exit the program screen.
1
To delete a program :
1 Press PROGRAM.
2 Select the program with the cursor buttons (2/3),
then press CLEAR.
3 Press PROGRAM to exit the program screen.
1
Press PROGRAM.
The program screen appears. When a Video CD or
CD is loaded, the cursor appears in the program
window.
Notes
• The complete program will be deleted even if the disc tray
is open or power off (standby)
• Pressing CLEAR when the disc is stopped will clear all
programs.
ProgramTrack
Current:Track
TotalTime
1(/10)
0.00
Move ENTER Play
Exit
PROGRAM
2
3
Use the num ber buttons to enter the
num bers of the tracks in the order you
w ant to program them in.
•
To program tracks 9, 7, and 18 in order, press 9,
7, +10 and 8.
•
To edit the program, refer to the procedures on
the previous page.
Press ENTER or PLAY 3.
•
•
Playback starts in the specified track order.
To stop the program play, press STOP 7.
Notes
• To program a pause, or to add or delete a number, refer to
the procedures for programming DVDs on page 41.
• You cannot program when playing a Video CD using menu
selections (during PBC).
42
En
Download from Www.Somanuals.com. All Manuals Search And Download.
To m ake a program of your favorite parts of a
To erase a program saved in m em ory – DVD
disc as it plays – DVD/Video CD/CD
With this player, it is possible to make a program as you
watch a DVD or Video CD or while listening to a CD.
The player erases programs in chronological order when
the maximum number of programs that can be held in
memory is exceeded. To prevent the player from erasing
older programs that you may still use regularly, or when
you don’t want to use a program anymore, it is possible
to manually erase programs stored in memory.
Press and hold PROGRAM for at least 2
seconds at any point during playback of a title,
chapter, or track you w ant to program , and it
w ill be m ade into or added to a program
w ithout displaying a Program screen. When a
title, chapter, or track is successfully added to
the program , it is show n m om entarily in the
display as w ell as its position in the program .
1
2
3
Load a DVD that has a program stored in
m em ory.
Press PROGRAM.
The program screen appears.
Use the cursor button (∞) to highlight
[Program Mem ory] and use the cursor
buttons (3/ ∞) to select [Off].
Chapter 07 3 Program 03
4
Press ENTER.
The program is cleared from memory.
To confirm the contents of a program :
Press PROGRAM.
Notes
• When using this function to program DVDs, the program
being created corresponds to the Program screen (chapter
or title) that appears when PROGRAM is pressed. Be sure
to check that the appropriate program type is selected.
• You cannot make a program containing chapters in
different titles.
To save a program in m em ory – DVD
This player can memorize the programs on up to 24
DVDs. By turning the [Program Mem ory] to [On], the
player will save your program and recall it the next time
you use the same DVD. When the program memory
exceeds 24, programs will be erased in chronological
order from the oldest program in memory.
1
Use the cursor button (∞) to highlight
[Program Mem ory] and use the cursor
button (3) to select [On].
Program Chapter ProgramTitle
Current:
Title
Title
1
7
Chapter
1
(Chapter 1 ~ 49)
09 07 18
Program Memory On
Off
PROGRAM
Move
Exit
2
Press ENTER.
The program is saved in memory.
Note
When a DVD with a program stored in memory is loaded,
program playback may start automatically.
43
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Mem orizing a Last Mem ory
location to return to later
Continuing Playback from a
Specified Location (Last
Memory)– DVD/Video CD
The Last Memory function is convenient when you want
to continue viewing a disc from the point where you
were watching before. Unlike the resume function, the
Last Memory function is effective even if the DVD is
removed from the player (Last Memory locations saved
for Video CDs are effective only if the disc remains
loaded in the player).
1
2
Press LAST MEMORY during play.
The “LAST MEMO” indicator lights on the player.
Press to turn the pow er to standby, or
stop playback w ith STOP 7.
Once memorized, the memorized point will be
recalled even if the power is turned off, or if the
disc is ejected. Points on up to 5 discs can be
memorized, and those points are recalled the next
time any of the discs are played back.
LAST
MEMORY
OPEN/
•
A Last Memory point can be memorized for only
one Video CD at a time as the function is only
effective until the Video CD is removed from the
player.
CONDITION CLOSE
MEMORY
LAST
MEMORY
REP EAT
ANGLE
AUDIO
S ETUP
SUB TITLE
REP EAT
A-B
M ENU TOP MENU
RETURN
DISPLAY
5
¶
¶
NEXT
P REV
¢
4
5
¶
¶
Resum ing playback from w here
LAST MEMORY w as pressed
P LAY
3
PAUS E
8
S TOP
7
¶
PLAY 3
STOP 7
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
CLEAR
+1 0
5
4
7
1
Load a disc that has a Last Mem ory point
m em orized.
0
8
PROGRAM SEARCH MODE
RANDOM
Some DVDs will start playback automatically when
loaded. In this case, press STOP 7 to stop
playback.
Î
2
Press LAST MEMORY w hile in the stop
m ode.
The disc begins playback at the memorized point.
•
Last Memory mode may not function for some
DVDs.
•
If you register more than five DVDs, details of the
latest disc are memorized, while details of the
least recent disc (the disc you registered first) is
erased.
•
•
Even with a disc you have memorized with Last
Memory, playback begins at the start of the disc
if you press PLAY 3.
This function is for playback of DVDs or Video
CDs only. You cannot use it with CDs.
To clear the Last Mem ory location
Call up the Last Memory location by pressing LAST
MEMORY. Then press CLEAR while “Last Mem ory” is
still being displayed on the screen.
The “LAST MEMO” indicator disappears from the
display.
44
En
Download from Www.Somanuals.com. All Manuals Search And Download.
When a disc that has m em orized settings is
loaded
“Condition Mem ory” will appear on the screen, and
Memorizing Settings for Often
Viewed DVDs (Condition
Memory)– DVD
You can store in memory settings for DVDs you often
watch. Settings remain in memory even if you remove
the disc from the player, or switch power to the player to
standby. If you load a disc that has its settings
memorized, “CONDITION” appears in the display.
When you start playing the disc, the memorized settings
are automatically recalled.
the previously memorized settings will be selected.
Erasing the recorded contents
Load a disc that has memorized settings, and press
CLEAR while “Condition Mem ory” is being displayed.
The disc’s recorded data will be erased.
Notes
• Settings are stored in memory for use any time.
CONDITION
MEMORY
• You can store settings for up to 15 DVDs in
memory. If you memorize settings for more than 15
DVDs, previously memorized settings are erased in
chronological order from the least recently
memorized. Subsequently, if you load a disc with
erased settings, the settings of the most recently
played disc are used.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
REP EAT
ANGLE
AUDIO
S ETUP
SUB TITLE
REP EAT
A-B
M ENU TOP MENU
RETURN
DISPLAY
5
¶
¶
• If you make changes to any of the settings
memorized in Condition Memory, press
CONDITION MEMORY during playback to
memorize new settings.
2
NEXT
P REV
¢
4
5
¶
¶
P LAY
3
PAUS E
8
S TOP
7
¶
• Switching of the multi-language mode etc., is
automatic on some discs.
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
CLEAR
+1 0
5
4
7
0
8
PROGRAM SEARCH MODE
RANDOM
Î
Press CONDITION MEMORY during playback.
Settings are memorized for the disc currently playing.
The follow ing six settings are m em orized:
TV Screen (page 27)
OSD Position (page 28)
Multi-Angle (page 29)
Multi-language (page 30)
Multi-Language subtitles (page 32)
Parental Lock Level (page 35)
45
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The display changes for each type of disc as follow s
each tim e the button is pressed.
Viewing Disc Information
– DVD/Video CD/CD
DVD
Use DISPLAY to get current information about the disc
currently loaded. You can get information about the titles
and chapters on a DVD or tracks on a Video CD or CD.
When viewing DVDs, you can also check the digital
bitstream transmission rate.
TITLE inform ation:
Play
Title
2–1
0.24
–0.05/ 0.29
Top Row : title and chapter
number, elapsed time of
current title
Bottom Row : remaining
time in title, total time of
title
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
REP EAT
ANGLE
AUDIO
S ETUP
SUB TITLE
«
REP EAT
A-B
M ENU TOP MENU
RETURN
CHAPTER inform ation:
DISPLA
Y
5
¶
¶
DISPLAY
Play
Chapter
1–1
1.19/ 2.18
1.19
Top Row : title and
chapter number, elapsed
time of current title
NEXT
P REV
¢
4
5
¶
¶
P LAY
3
PAUS E
8
S TOP
7
Bottom Row : time in
current chapter, total
time of chapter
¶
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
+1 0
5
4
7
«
0
8
PROGRAM SEARCH MODE
RANDOM
CHAPTER inform ation:
Î
Play
Chapter
1–1
–0.59/ 2.18
1.19
Top Row : title and
chapter number, elapsed
time of current title
Bottom Row : remaining
time in current chapter,
total time of chapter
«
Press DISPLAY during w hile a disc is playing.
Press DISPLAY repeatedly to change the
inform ation being displayed.
Data transm ission rate
inform ation:
Play
Tr. Rate
1–1
1.32
8.9
:
Top Row : title and
chapter number, elapsed
time of current title
The disc information is displayed superimposed over the
video image on the screen.
Bottom Row : bitstream
transmission rate level
Press and hold DISPLAY to display the tim e
rem aining on the disc.
«
When you release the button, the information
disappears.
Display off
Note
Depending on the format and type of disc being used, not all
screens may be displayed.
46
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Press DISPLAY during w hile a disc is stopped to
display DVD title and chapter inform ation or Video
CD and CD track inform ation. Press DISPLAY again to
turn the display off.
CD
Track Inform ation:
Play
Track
1
0.03
3.32
–3.29/
Top Row : current track
number, track time
Information about the titles and chapters or tracks on a
disc is displayed. When the information exceeds the
space on the screen, use the cursor buttons
(2/3) to move to other screens.
Bottom Row : remaining
time of current track, and
total time of track
DVD
«
DVD inform ation
Information: DVD
Disc inform ation:
When a DVD is loaded,
Title
01
Chapter Title
Chapter
1~ 1
1~ 1
1~ 1
1~ 4
Play
All
1/2
0.15
each title and the num ber
of chapters w ithin each
title is displayed.
1~ 1
1~ 1
1~ 1
1~ 1
1~ 1
06
07
08
09
–6.15/ 6.32
Top Row : current track
number, total number of
tracks on CD, track time
02
03
04
05
DISPLAY
Exit
1/1
Bottom Row : remaining time
of CD, total time of CD
CD and Video CD
«
CD and Video CD
inform ation
Display off
Information: Compact Disc
Total Time
Track
01
6.30
When a CD or Video CD is
loaded, the total tim e of
the disc and the tim e of
each track on the disc is
displayed.
Time
3.32
2.58
02
Video CD (w ith PBC disabled)
DISPLAY
Exit
1/1
Disc inform ation:
Play
All
5/10
–2.38/ 22.57
20.19
Top Row : current track
number, total number of
tracks, total elapsed time of
Video CD
Resetting the Player to System
Settings
To reset the player, press and hold 7 (stop) on the front
panel when pressing STANDBY/ ON to turn the unit
from standby to on .
Bottom Row : remaining time
of Video CD, total time of
Video CD
«
All program memory, saved settings from functions such
as Last Memory and Condition Memory are cleared, and
all Setup screen menus are returned to factory settings.
Track inform ation:
Play
Track
5
20.19
2.38/ 4.40
Top Row : current track
number, total elapsed time of
Video CD
Bottom Row : track time,
total time of track
«
Track inform ation:
Play
Track
5
20.19
–2.02/ 4.40
Top Row : current track
number, total elapsed time of
Video CD
Bottom Row : remaining time
of track, total time of track
«
Display off
Note
When playing Video CDs in PBC mode or unfinalized CD-Rs
not all the above information is displayed.
47
En
Download from Www.Somanuals.com. All Manuals Search And Download.
For Proper and Long Use of
This Unit
Additional
Information
DO NOT MOVE THE UNIT DURING PLAYBACK
During playback, the disc rotates at high speed. Do NOT
lift or move the unit during playback. Doing so may
damage the disc.
WHEN MOVING THE UNIT
Disc Care
When changing places of installation or packing the unit
for moving, be sure to remove the disc and return the
disc table to its original position in the player. Then,
press STANDBY/ ON and switch the power to
standby. Check that the “--OFF--” indication on the
display goes off, then disconnect the power cord.
Moving this unit with the disc loaded may result in
damage to this unit.
HOW TO HOLD DISCS
When loading or removing
discs, try not to touch their
playing surfaces.
CLEANING
INSTALLATION
• Select a stable place to the side of a TV set or stereo
system to be connected to the unit.
• When using the unit with a stereo system, install the
speakers a little bit away from the TV.
Fingerprints or other dirt on the disc may affect sound
and picture quality.
To clean your discs, use a soft clean cloth to wipe them.
If necessary, moisten a soft cloth with diluted neutral
detergent to remove heavy dirt or fingerprints.
• Do NOT install the unit on top of a TV or color monitor.
Install the unit away from equipment that may be
affected by magnetism, such as a cassette deck.
• Do NOT place objects on top of the unit.
Do not w ipe in a circular
direction (Concentric
scratches in the disc groove edge.
tend to cause noise.)
Gently w ipe from the
inside tow ard the outer
AVOID INSTALLING IN A PLACE THAT IS:
• Exposed to direct sunlight
• Exposed to humidity or where ventilation is poor
• Extremely hot or cold
Discs must not be cleaned with record cleaning sprays,
or static prevention sprays, etc. Also do not use volatile
liquids such as benzine, or thinner, etc.
• Exposed to vibration
• Exposed to dust
• Exposed to oily smoke, steam or heat (for example, a
kitchen)
DO NOT BLOCK VENTS
NEVER PLAY CRACKED OR WARPED DISCS
Do NOT use the player on top of a long-fibered carpet,
bed or sofa, and do not cover it with a cloth, etc. This
will prevent heat radiation and could result in damage.
The disc revolves in the player at
high speed when it is played. Never
play a cracked, scratched or warped
disc. This may damage the player or
cause it to malfunction.
AVOID HEAT
Do NOT place the unit on equipment which generates
heat, such as an amplifier.
NEVER USE DISCS WITH SPECIAL SHAPES
When installing the unit in a rack, place it on the lowest
shelf possible (however, not where it is exposed to dust)
and separated from the amplifier to avoid the heat
generated by the amplifier or other audio equipment.
CD’s with special shapes (heart-shaped CDs, octagonal
CDs, etc.) cannot be played on this
set.
Attempting to do so may damage the
set. Do not use such CDs.
CAUTION: WHEN PLACING THE UNIT IN A
STEREO RACK WITH GLASS DOORS
Be sure there is ample space between the unit and
the glass doors when opening the disc table using
the remote control. If the disc table opens against
strong resistance, such as a closed glass door,
damage to the unit may result.
AFTER USING DISCS, STORE THEM UPRIGHT
After playing a disc, always remove it from the player
and return it to its jacket. Then store it standing upright
away from heat and humidity.
• Store discs carefully. If you store discs at an angle, or
stacked on top of each other, discs may become
warped even when in their jackets.
• Do not leave discs in locations such as the seat of a
car, which may become excessively hot.
CAUTION: WHEN USING THE DISC
All rights reserved.
Unauthorized public performance, broadcasting or
copying is a violation of applicable laws.
48
En
Download from Www.Somanuals.com. All Manuals Search And Download.
CONDENSATION
CLEANING THE PLAYER
Moisture may form in the operating section of the player
if the player is brought from cool surroundings into a
warm room or if the temperature of the room rises
suddenly. When this happens, the player’s performance
will be impaired.
To prevent this, let the player stand in its new
surroundings for about an hour before switching it on, or
make sure that the room temperature rises gradually.
Condensation may also form during the summer if the
player is exposed to
To clean the PLAYER, wipe with a soft, dry cloth. For
stubborn dirt, wet a soft cloth with a mild detergent
solution made by diluting one part detergent to 5 or 6
parts water, wring well, then wipe off the dirt. Also use a
dry cloth to wipe the surface dry. Do not use volatile
liquids such as benzene and thinner which are harmful to
the unit.
LENS CLEANER
The player's pickup lens should not become dirty in
normal use, but if for some reason it should malfunction
due to soiling, contact your nearest PIONEER authorized
service center. Lens cleaners are commercially available,
but special care should be exercised in their use since
some may cause damage to the lens.
the breeze from an air
conditioner. In such
cases, change the
location of the player.
SWITCH POWER TO STANDBY WHEN NOT
USING THE UNIT
NOTES ON USING OPTICAL CABLES (DV-535
only)
• Do not route cords around sharp
angles. When storing, wind the cords
Depending on the strength of the TV or radio broadcast
signal, having the TV or radio on while
power to the unit is on may result in
stripes on the TV screen or noise.
However, this is not a malfunction of
this unit or the TV or radio. In such a
case, switch the power of the unit to
standby.
so that they have a diameter of at least
15 cm.
15 cm dia.
or m ore
• When connecting, push all the way
into the terminal.
• Do not use cords with a length of over
3 m.
• If moisture or dust has collected on the plug, wipe it
with a soft cloth before connecting.
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power cord
when your hands are wet as this could cause a short
circuit or electric shock. Do not place the unit, a piece of
furniture, etc., on the power cord, or pinch the cord.
Never make a knot in the cord or tie it with other cords.
The power cords should be routed in such a way that
they are not likely to be stepped on. A damaged power
cord can cause a fire or give you an electrical shock.
Check the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized service
center or your dealer for a replacement.
49
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
Language codes are used when setting the audio and
subtitle language preferences (page 33).
Language
Input-code
Language
Input-code
Language
Input-code
Japanese (ja)
English (en)
French (fr)
1001
0514
0618
0405
0920
0519
2608
1412
1620
1922
1821
1115
0512
0101
0102
0106
0113
0118
0119
0125
0126
0201
0205
0207
0208
0209
0214
0215
0218
0301
0315
0319
0325
0401
0426
0515
0520
0521
0601
0609
0610
0615
0625
0701
0704
0712
0714
Gujarati (gu)
Hausa (ha)
0721
0801
0809
0818
0821
0825
0901
0905
0911
0914
0919
0923
1009
1023
1101
1111
1112
1113
1114
1119
1121
1125
1201
1214
1215
1220
1222
1307
1309
1311
1312
1314
1315
1318
1319
1320
1325
1401
1405
1415
1503
1513
1518
1601
1612
1619
1721
Rhaeto-Romance (rm)
Kirundi (rn)
Romanian (ro)
Kinyarwanda (rw)
Sanskrit (sa)
Sindhi (sd)
1813
1814
1815
1823
1901
1904
1907
1908
1909
1911
1912
1913
1914
1915
1917
1918
1919
1920
1921
1923
2001
2005
2007
2008
2009
2011
2012
2014
2015
2018
2019
2020
2023
2111
2118
2126
2209
2215
2315
2408
2515
2621
Hindi (hi)
German (de)
Italian (it)
Croatian (hr)
Hungarian (hu)
Armenian (hy)
Interlingua (ia)
Interlingue (ie)
Inupiak (ik)
Spanish (es)
Chinese (zh)
Dutch (nl)
Sangho (sg)
Serbo-Croatian (sh)
Sinhalese (si)
Slovak (sk)
Portuguese (pt)
Swedish (sv)
Russian (ru)
Korean (ko)
Greek (el)
Indonesian (in)
Icelandic (is)
Hebrew (iw)
Yiddish (ji)
Slovenian (sl)
Samoan (sm)
Shona (sn)
Afar (aa)
Javanese (jw)
Georgian (ka)
Kazakh (kk)
Somali (so)
Albanian (sq)
Serbian (sr)
Siswati (ss)
Sesotho (st)
Sundanese (su)
Swahili (sw)
Tamil (ta)
Abkhazian (ab)
Afrikaans (af)
Amharic (am)
Arabic (ar)
Greenlandic (kl)
Cambodian (km)
Kannada (kn)
Kashmiri (ks)
Kurdish (ku)
Kirghiz (ky)
Assamese (as)
Aymara (ay)
Azerbaijani (az)
Bashkir (ba)
Byelorussian (be)
Bulgarian (bg)
Bihari (bh)
Telugu (te)
Latin (la)
Tajik (tg)
Lingala (ln)
Thai (th)
Laothian (lo)
Lithuanian (lt)
Latvian (lv)
Tigrinya (ti)
Turkmen (tk)
Tagalog (tl)
Bislama (bi)
Bengali (bn)
Tibetan (bo)
Breton (br)
Malagasy (mg)
Maori (mi)
Setswana (tn)
Tonga (to)
Catalan (ca)
Corsican (co)
Czech (cs)
Macedonian (mk)
Malayalam (ml)
Mongolian (mn)
Moldavian (mo)
Marathi (mr)
Malay (ms)
Turkish (tr)
Tsonga (ts)
Tatar (tt)
Welsh (cy)
Twi (tw)
Danish (da)
Bhutani (dz)
Esperanto (eo)
Estonian (et)
Basque (eu)
Persian (fa)
Finnish (fi)
Ukrainian (uk)
Urdu (ur)
Maltese (mt)
Burmese (my)
Nauru (na)
Uzbek (uz)
Vietnamese (vi)
Volapük (vo)
Wolof (wo)
Xhosa (xh)
Nepali (ne)
Norwegian (no)
Occitan (oc)
Oromo (om)
Oriya (or)
Fiji (fj)
Yoruba (yo)
Zulu (zu)
Faroese (fo)
Frisian (fy)
Irish (ga)
Panjabi (pa)
Scots-Gaelic (gd)
Galician (gl)
Guarani (gn)
Polish (pl)
Pashto, Pushto (ps)
Quechua (qu)
50
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings are canceled.
When the power is turned off by power failure or by
unplugging the power cord, settings will be canceled.
Troubleshooting
Incorrect operations are often mistaken for trouble and
malfunctions. If you think that there is something wrong
with this component, check the points below.
Sometimes the trouble may lie in another component.
Inspect the other components and electrical appliances
being used. If the trouble cannot be rectified even after
exercising the checks listed below, ask your nearest
PIONEER authorized service center or your dealer to
carry out repair work.
\
Before unplugging the power cord, press
STANDBY/ ON and check that “--OFF--”
disappears in the display.
No picture or no color.
Connection is incorrect.
\
Check that cord connections are correct and that
plugs are firmly connected.
Internal player settings are incorrect.
\
If AV CONNECTOR connections have been made,
make sure that the Setup screen Video menu
[Video Out] setting corresponds to the
capabilities of the TV or monitor that connections
have been made to (page 28).
The disc table com es back out autom atically, shortly
after the disc table is closed.
The disc is dirty or warped.
\
Refer to ‘Disc Care’ (page 48).
The disc is not placed properly on the disc table.
Use the disc tray guide to align the disc (page 19).
Region number does not conform with this unit.
Operation (settings) of TV or AV amplifier is not
appropriate.
\
\
Be sure that your TV, receiver, or amplifier is set
up to view DVD playback.
\
If the region number on the disc does not match
the number on the player, the disc cannot be used
(page 54).
The screen is stretched or aspect does not change.
The multi aspect setting is not appropriate.
\
There is condensation on the operating section of the
player.
Change the aspect setting in the [TV Screen]
setting in the Setup screen Video menu to the
screen type most appropriate to the TV or monitor
you are using (page 27).
\
Allow time for condensation to evaporate. If player
is near an air conditioning unit, you should move
the player (page 49).
Picture disturbance during playback or dark.
Playback is not possible.
The disc has been loaded upside down.
This player is compatible with Macro-Vision System
copy guard. Some discs include a copy prevention
signal, and when this type of disc is played back,
stripes etc., may appear on some sections of the
picture depending on the TV.
\
Check that the disc has been loaded with the label
side facing up.
m ark appears on screen.
The selected function does not operate for that disc.
\
This is not a malfunction.
The position of the TV SYSTEM switch was changed
during player operations.
m ark appears on screen.
The operation is prohibited by the player.
\
Switching the position of the TV SYSTEM switch
is not effective if a disc is playing. Stop playback
before performing this operation.
Picture playback stops and the operation buttons
cannot be used.
Discs respond differently to particular player functions
which may result in the screen becoming black for a
brief instant or shaking slightly when the function is
executed.
\
Stop disc playback (press STOP 7), then start
playback again.
\
These problems are largely due to differences
between discs and disc content and are not
malfunctions of this player.
New settings m ade in the Setup screen m enus w hile
a disc is playing are ineffective.
Some settings can be changed while a disc is playing,
but are not effective. This is not a malfunction.
\
Make the same setting when the player is
stopped.
\
Stop disc playback (press STOP 7), then start
playback again. When playback is resumed, the
new settings should be in effect. Please note that
making settings in the Setup screen menus may
cancel the resume function.
When m aking changes in the Setup screen m enus,
is displayed.
There is a Video CD or CD loaded in the player and the
setting that was changed only applies to DVD
performance.
\
The settings will be effective the next time a DVD
is loaded.
51
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The pause mode is engaged.
Audio is output from the analog output jacks but not
from the digital output jacks.
Player settings are incorrect.
\
Press PLAY 3 or PAUSE 8 to exit the pause
mode.
Stereo amplifier operation is incorrect.
\
In the Audio 1 menu, check that the appropriate
digital audio output formats are selected, and that
the [Digital Out] setting is not set to [Off] (page
26).
\
Check input (CD, AUX, etc.) selector to determine
if it is selected for DVD playback.
The DVD or CD is recorded in DTS audio.
\
DTS audio is only output from the digital output
jacks. Connect the digital output on the player to
the digital input on a receiver or amplifier with a
built in DTS decoder to hear DTS audio.
When recorded on a VCR or passed through an AV
selector, there is disturbance in the playback picture.
Due to the player’s copy protection circuits,
connection of this device through a VCR or an AV
selector may prevent recording or cause picture
problems.
Noticeable difference in DVD and CD volum e.
DVDs and CDs use different recording methods.
\
\
This is not a malfunction.
This is not a malfunction.
Rem ote control operation is not possible.
The rear panel control input jack on the player is being
used.
Caution
Static electricity or other external influence may cause
malfunctioning of this unit. In this case, unplugging
the power cord and then re-plugging it in will usually
reset the unit for proper operation. If this does not
correct the problem, please consult your nearest
PIONEER service center.
\
Point the remote control at the component that
the player is connected to (page 15).
The remote control is too far from the player, or the
angle with the remote sensor is too wide.
\
Be sure to operate the remote from a location
within its operating range (page 6).
The batteries are exhausted.
\
Replace the exhausted batteries with all new
batteries (page 6).
Audio is not output or is distorted.
The Setup screen Audio 1 menu [96 kHz PCM Out]
setting is set to [96 kHz].
\
Either connect using the analog outputs, or set
[96kHz PCM Out] in the Audio 1 menu to [96kHz
3 48 kHz] (pages 13, 25).
The disc is dirty.
Refer to ‘Disc Care’ (page 48).
\
The connection plugs are not inserted fully into the
terminals or are not connected.
\
Check that all connection plugs are firmly inserted.
The connection plug or terminal is dirty.
\
Check that the plugs and terminals are wiped
clean of dirt, etc.
Audio cord connection is wrong.
\
Check to make sure th,at the audio cords are
connected correctly (page 13).
Connection is made to the stereo amplifier‘s PHONO
input terminal.
\
Change connection to any input terminal except
PHONO.
52
En
Download from Www.Somanuals.com. All Manuals Search And Download.
DTS
Terms
DTS stands for Digital Theater System. DTS is a
surround system different from Dolby Digital that has
become a popular surround sound format for movies. In
order to enjoy the benefits of DTS encoded discs, the
digital output jack (either coaxial or optical) of this player
needs to be connected to an AV amplifier or receiver or
to a DTS decoder to be able to enjoy the
Aspect ratio
Aspect ratio refers to the length to height ratio of TV
screens. The ratio of a standard TV is 4:3, while the ratio
of a high-definition or wide TV is 16:9. The latter allows
you to enjoy a picture with a wider perspective.
surround sound of DTS audio. DTS audio is
not output from the analog audio outputs.
Chapter num ber
Chapter numbers are the numbers assigned to sections
of a title on the disc, similar to chapters in a book. If the
disc includes chapter numbers, you can locate the
section you want very quickly using search and other
functions.
Dynam ic range
Dynamic range refers to the difference between the
maximum and minimum levels of the audio soundtrack
as measured in decibels (dB).
Compressing the dynamic range raises the minimum
signal level and lowers the maximum signal level. This
allows you to hear voices and other low level audio
signals clearly while lowering strong audio signals like
the sound of explosions.
Condition m em ory
“Condition” refers to the various mode settings, etc. On
this player, various conditions, such as those set during
playback, can be memorized. This function allows you to
play back the same disc at any time without having to
redo your preferred settings.
MPEG
Short for Moving Picture Experts Group. This is an
international standard for compression of moving
images. On some DVDs, digital audio has been
compressed and recorded in this format.
Digital bitstream
The bitstream does not refer to the audio signal, but
rather to the digital data that, once converted, becomes
the audio signal. The player outputs digital bitstreams via
the digital optical or digital coaxial output. If the
bitstream cannot be decoded by the connected AV
amplifier etc., digital noise is produced. Digital bitstream
formats compatible with different entertainment
systems can be selected in the Setup screen Audio 1
menu.
Multi-angle
When you watch a TV program, you are watching the
image filmed through the TV camera. Because of this,
the picture is displayed on your TV from the viewpoint of
the TV camera’s position. In a TV studio, the image is
filmed by many cameras at the same time, and one of
those images is selected by the program director and
transmitted to your TV. If all the filmed images were
transmitted to your TV you would be able to select the
camera image you want. Some DVD discs are recorded
with the angles of more than one camera used for
filming, and these can be selected using this player.
These types of discs are called multi-angle discs.
Digital output (Coaxial)
Output of the digital audio signal is transmitted
electronically using a coaxial cable. Because the signal
being transmitted is digital, connection must be made to
the coaxial digital input of another component. Noise will
be output if connected to the analog audio inputs as the
digital signal cannot be decoded.
Parental lock level
Digital output (Optical) (DV-535 only)
This function was suggested by parents concerned
about what type of media their children were able to
watch. Parental lock restrictions are restrictions
incorporated into titles which include scenes that
parents may not wish their children to view.
Normally, audio is converted to an electric signal and
transmitted through an electric wire from the player to
the amplifier, etc. Changing this signal to a digital signal
and transmitting it through an fiber-optic cable is called
optical digital output. Similarly, optical digital input
receives digital signals from external units such as an AV
amplifier or receiver.
PCM
PCM stands for Pulse Code Modulation and is digital
audio. The digital audio of CDs is PCM. This player also
has a function that converts Dolby Digital and MPEG
digital bitstreams into PCM to enable you to listen to
quality digital sound even without a special decoder.
Dolby Digital
The maximum 5.1 channels of audio used in the
surround system (Surround Digital) for movie theaters is
digital data compressed by the third generation algorithm
encoder.
Playback Control (PBC)
This refers to signals recorded on a Video CD (Version
2.0) enabling playback control.
You can use menus recorded on discs with PBC for
easy, interactive search for desired scenes, and
playback.
1
In order to enjoy Dolby Digital discs, this unit’s digital
output jack (either coaxial or optical) must be connected
to the digital input jack of an AV amplifier or Dolby Digital
decoder to enjoy the sound of Dolby Digital soundtracks.
You can also enjoy viewing high-resolution/standard
resolution still images.
53
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Regional restriction codes (region num ber)
S-video
Regional restriction codes are built in to DVD players and
DVD discs for each sales region. If the regional code of
the DVD player does not match one of the regional
codes of the DVD disc, playback is not possible.
The region number can be found on the rear panel of the
DVD player. The illustration below shows the regions
and corresponding region numbers.
Connecting the S-video output on the player to a TV or
monitor with S-video input via an S-video cable produces
clearer picture reproduction by sending separate signals
for the luminance and the color. These signals are then
combined by the television to produce a better quality
picture.
System control
When you connect this player via a cord with a mini plug
to another Pioneer component such as a receiver or an
amplifier bearing the Î mark, you can control the player
as though it were a component in a system. To control
the player, point the player’s remote control at the
component that the player is connected to, and not the
player itself.
Tim e num ber
The time number corresponds to the elapsed playback
time of a disc from its beginning. When using the time
search function, use the time number to locate scenes
that occur at the time selected.
Sam pling Frequency
When a sound wave is converted to a digital signal, the
sound is sampled and converted to data at a specific
frequency rate. For example, a signal with a 96 kHz
sampling rate indicates that in one second, the analog
signal was sampled 96000 times to produce the digital
signal.
Title num ber
DVD discs are divided into units referred to as titles, and
titles are divided into chapters. Menu screens do not
belong to any title. A disc which contains a movie may
have only one title with many or no chapter divisions.
Karaoke discs may have many titles, assigning a title to
each song on the disc.
Subtitle
Subtitles are language titles superimposed on movies, or
other media. Up to 32 different subtitle languages can
be recorded on a DVD disc. The subtitle function can be
used to select the language of your choice.
54
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Audio output
System ... DVD system and Compact Disc digital audio system
Power requirements ................. AC 220-240 V, 50/60 Hz
Power consumption ................................................ 12 W
Power consumption in standby mode ....... less than 1 W
Weight ................................................................... 2.7 kg
Dimensions
Output level
During audio output ............. 200 mVrms (1 kHz, –20 dB)
Number of channels ....................................................... 2
Jacks ............................................................... RCA jacks
Digital audio characteristics
Frequency response ..... 4 Hz to 44 kHz (DVD fs: 96 kHz)
S/N ratio ............................................................... 115 dB
Dynamic range ..................................................... 102 dB
Total harmonic distortion ................................... 0.002 %
DV-535 ...................... 420 (W) x 281 (D) x 104 (H) mm
DV-530 ...................... 420 (W) x 278 (D) x 104 (H) mm
(Not including protruding cables, etc.)
Operating temperature ............................ +5°C to +35°C
Operating humidity .......... 5% to 85% (no condensation)
Wow and flutter ............................ Limit of measurement
(±0.001% W. PEAK) or lower
S-Video output
Digital output
Y (luminance) - Output level ........................ 1 Vp-p (75 Ω)
C (color) - Output level ........................ 286 mVp-p (75 Ω)
Jacks .......................................................... S-VIDEO jack
Optical digital output (DV-535 only) ..... Optical digital jack
Coaxial digital output ......................................... RCA jack
Other term inals
Video output
CONTROL IN .......................................... Minijack (3.5 ø)
Output level ................................................ 1 Vp-p (75 Ω)
Jacks ................................................................. RCA jack
Accessories
Audio cord ...................................................................... 1
Video cord ...................................................................... 1
Power cord ..................................................................... 1
Remote control unit ....................................................... 1
AA (R6P) dry cell batteries ............................................. 2
Operating Instructions ................................................... 1
AV connector input/output .................... 21-pin connector
This connector provides the video and audio signals
for connection to a compatible color TV or monitor.
21-pin connector assignm ent
20 18 16 14 12 10 8 6 4 2
Note
The specifications and design of this product are subject to
change without notice, due to improvement.
21 19 17 15 13 11 9 7 5 3 1
PIN no.
1
3
4
7
8
Audio 2/R out
Audio 1/L out
GND
11 G out
15 R or C out
17 GND
B out
19 Video out or Y out
21 GND
Status
Published by Pioneer Corporation.
Copyright © 2000 Pioneer Corporation.
All rights reserved.
55
En
Download from Www.Somanuals.com. All Manuals Search And Download.
I logo dei formati dei dischi mostrati qui sopra si trovano
di solito sulle etichette o sulle custodie dei dischi.
Caratteristiche di questo lettore
• Per evitare errori di funzionamento, non usare
adattatori per dischi CD singoli da 8 cm.
• I dischi diversi da quelli indicati qui sopra non possono
venire riprodotti con quest’unità.
• I DVD che possiedono numeri di regione incompatibili
con quelli dell’unità, i dischi DVD-Audio, DVD-ROM e
CD-ROM non possono venire riprodotti con
quest’unità. Il numero di regione del lettore si trova sul
pannello posteriore.
Com patibilità con i form ati DVD,
Video CD e CD
I dischi DVD, Video CD e CD che portano i logo seguenti
possono venire riprodotti con lettori per DVD PIONEER.
Per maggiori informazioni in proposito, consultare la
tabella che segue.
1
Tipi di disco e
m archio che portano riproducibili
Diam etro e lati
Durata di
riproduzione
*
Riproduzione di CD registrabili
•
Tenere presente che quest’unità non può registrare CD
registrabili.
DVD VIDEO
DVD VIDEO
Audio digitale
Video digitale
(MPEG 2)
•
Quest’unita può riprodurre CD-R e CD-RW ad uso
musicale. Tuttavia, se il registratore CD o il disco fossero
danneggiati, non tutti i dischi verranno riprodotti con
successo.
12 cm /lato
singolo
Uno strato
Due strati
133 m in.
242 m in.
Ciò accade ad esempio se il disco è sporco o graffiato o
se la lente del lettore è sporca.
12 cm /lato
doppio
Uno strato
Due strati
266 m in.
484 m in.
DVD VIDEO
Audio digitale
Video digitale
(MPEG 2)
8 cm /lato
singolo
Uno strato
Due strati
41 m in.
75 m in.
8 cm /lato
doppio
Uno strato
Due strati
82 m in.
150 m in.
VIDEO CD
VIDEO CD
Audio digitale
Video digitale
(MPEG 1)
12 cm /lato
singolo
Max. 74 m inuti
Singolo VIDEO CD
Audio digitale
Video digitale
(MPEG 1)
8 cm /lato
singolo
Max. 20 m inuti
CD
CD
Audio digitale
Max. 74 m inuti
12 cm /lato
singolo
1
1
*
Singolo CD
Audio digitale
Max. 20 m inuti
8 cm /lato
singolo
*
2
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Com patibile con una vasta gam m a
di segnali digitali DVD audio
Vasta gam m a di opzioni per la
visione di DVD
Angolazioni m ultiple (pagina 29)
Si possono vedere alcune scene da angolazioni differenti
quando i film o media usati possiedono le risorse
necessarie.
1
DVD sono registrati in uno di quattro formati digitali (in
data ottobre 1998). Le prese di uscita digitali audio di
questo lettore possono emettere segnali digitali Dolby
Digital*2, DTS*3, MPEG e lineare PCM.
ANGLE
: 3/4
ANGLE
: 2/4
Questo lettore possiede una funzione che cambia il
segnale Dolby Digital e MPEG audio in quello lineare
PCM. Ciò permette di riprodurre DVD registrati in
formato Dolby Digital e MPEG senza possedere un
decodificatore.
Sonoro in più lingue (pagina 31)
Installazione e im postazione
sem plici con m enu sullo scherm o
Si può scegliere la lingua per la visione di film o altri
media che possiedano le risorse e/o colonne sonore
necessarie.
Premere il pulsante SETUP del telecomando per fare
aprire la schermata Setup per rendere l’impostazione e la
regolazione del sistema più semplici grazie a menu sullo
schermo organizzati in modo razionale. Inoltre, le
Dolby Digital
5.1CH
Dolby Digital
5.1CH
: 2 Spanish
Audio
: 1 English
Audio
informazioni sullo schermo ( )❖ appaiono quando
i
necessario per chiarire punti oscuri e spiegare quali
opzioni sono a disposizione. Daremo di seguito qualche
esempio.
Sottotitoli in più lingue (pagina 32)
Rispondere a qualche domanda
Si può scegliere la lingua di visualizzazione dei sottotitoli
o disattivare questi ultimi durante la visione di film o altri
media che possiedono sottotitoli.
e potrete impostare tutti i dati
Audio1 Audio2 Video Language General
Setup Navigator
audio, video e per la lingua dei
messaggi sul monitor necessari
impostati automaticamente dal
lettore con Setup Navigator
(pagina 16)
Setup Navigator
Start
Auto Start Off
Subtitle :1 English
Subtitle :2 Spanish
ENTER
SETUP
Exit
Move
Select
Scegliere il tipo di televisore
che si sta usando e il formato
dello schermo che si preferisce
quando si riproducono DVD col
meno Video di (pagina 27).
HELLO!
HOLA!
Audio1 Audio2 Video Language General
TV Screen 4:3(Letter Box)
Video Out —4:3(Pan&Scan)
16:9(Wide)
Questo marchio indica che l’operazione illustrata può non
essere possibile con certi dischi.
Select your display preference
SETUP
Move
Exit
Design di risparm io energetico
Questo apparecchio è realizzato per usare meno di 1 W
di energia quando il lettore è in modo di attesa.
❖
Le informazioni sullo schermo ( ) appaiono solo se
si sceglie [English] come lingua [OSD Language]
i
(pagina 17, 30).
Mentre si usa Setup Navigator, non appare alcuna
informazione sullo schermo ( ).
i
2
3
*
*
Prodotto sotto licenza della Dolby Laboratories.
“Dolby” ed il simbolo doppia D sono marchi registrati
della Dolby Laboratories. Lavori non pubblicati riservati.
© 1992-1997 Dolby Laboratories. Tutti i diritti sono
riservati.
“DTS” è un marchio di fabbrica della Digital Theater
Systems, Inc.
3
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Differenza fra i vari tipi di disco
Come usare questo manuale
Quello DVD è un formato eccezionale della massima
qualità audio e video digitali disponibili oggi.
DVD
Dato che l’uso di lettori e dischi DVD può confondere,
inizialmente, leggere attentamente le fasi seguenti per
impostare correttamente il sistema e poter iniziare a
farne uso il più presto possibile.
I dischi DVD sono divisi in unità chiamate “titoli”, a loro
volta divisi in “capitoli”. Un disco che contiene un film
può contenere un solo titolo senza alcuna suddivisione in
capitoli. I dischi Karaoke d’altra parte possono possedere
numerosi titoli ed assegnare un titolo a ciascun brano
che registrano. Le schermate dei menu non
Fam iliarizzatevi col lettore.
appartengono ad alcun titolo in particolare.
Leggere le sezione “Prim a di fare uso del lettore” a
pagina 6 per controllare che il lettore possieda tutti i suoi
accessori. Se non avete mai usato un lettore per DVD,
leggete la sezione “Nom e e funzione delle varie parti”
a pagina 7 per familiarizzarvi con le parti ed i pulsanti
dell’unità principale e del telecomando, dato che
vengono continuamente nominate nel corso del
manuale.
Le funzioni di un lettore per DVD in generale si applicano
a titoli di un disco o a capitoli all’interno di un particolare
titolo. Le funzioni disponibili del lettore possono variare
da titolo a titolo a seconda del disco. Se un disco
possiede una suddivisione in titoli insolita, il
funzionamento delle funzioni di ricerca e
programmazione possono venirne influenzate.
A pagina 53 si trova una lista dei termini usati, utile nel
caso si incontri una parola non conosciuta.
Titolo 1
Capitolo 1 Capitolo 2
Titolo 2
Capitolo 1 Capitolo 2
Eseguire i collegam enti necessari.
Ciascun sistema richiede collegamenti diversi. Leggere
la sezione “Collegam enti” a pagina 12 per sapere come
collegare i cavi video ed audio in modo adatto al sistema
che si possiede.
DVD
Preparate il lettore.
Prima di poter godere dei benefici del sistema DVD,
dovete impostare il lettore DVD in modo che possa
emettere le informazioni audio e video in formati
comprensibili dal vostro sistema. La sezione
“Im postazione del lettore” che inizia a pagina 16 spiega
l’uso di Setup Navigator, un programma che regola
automaticamente il lettore a seconda delle riposte che
date a domande sullo schermo. I menu della schermata
Setup, descritti nella sezione che inizia a pagina 23, sono
usati anche per molte altre funzioni. Imparando a fare
uso di questi menu potrete non solo semplificare l’uso
del lettore, ma renderlo anche più proficuo.
Video CD/ CD
I CD normali e quelli Video CD sono divi in unità
chiamate “brani”. Quelle dei dischi Video CD sono a
volte però chiamate anche “scene”. Una canzone in
generale corrisponde ad un solo brano. Alcuni brani però
sono ulteriormente divisi in sotto unità chiamate “indici”.
I dischi Video CD con funzione PBC (PlayBack Control, o
controllo della riproduzione) contengono anche menu
registrati sul disco che permettono di raggiungere
facilmente qualsiasi punto del disco stesso.
Se riprodotti su di un lettore per DVD, sia i dischi CD che
quelli Video CD possono venire considerati un solo titolo
a prescindere dal numero dei brani.
Riprodurre un disco.
Una volta che il sistema è collegato e le impostazioni
sono state fatte, non vi resta che riprodurre un disco
DVD, Video CD o CD. La sezione “Per iniziare ad usare
il lettore DVD” a pagina 19 descrive in breve le
operazioni base del lettore.
Brano 1
Brano 2
Brano 3
Brano 4
Godetevi le num erose funzioni del
vostro lettore.
Video CD
Brano 2
Una volta che conoscete bene le funzioni base del
lettore, potete cominciare ad esplorare le funzioni più
avanzate che il formato DVD e questo lettore possono
offrire. La sezione “Funzioni Avanzate” che inizia a
pagina 35 descrive l’uso delle varie funzioni disponibili su
molti dischi DVD.
Brano 1
Brano 3
Brano 4
Brano 5
CD
4
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Indice
Prim a di fare uso del lettore ............... 6
Im postazione delle opzioni di
lingua .............................................. 30
Controllo degli accessori in dotazione ............. 6
Preparazione del telecomando ........................ 6
Impostazione della lingua OSD ...................... 30
Impostazione delle preferenze per lingua e
sottotitoli nei menu della schermata
Setup ........................................................ 30
Cambio della lingua audio
(funzione multi lingue) .............................. 31
Scelta di una lingua per i sottotitoli
Nom e e funzione delle varie parti ..... 7
Pannello anteriore ............................................ 7
Display ............................................................. 8
Pannello posteriore .......................................... 9
Telecomando ................................................. 10
(sottotitoli in più lingue) ............................ 32
Collegam enti ..................................... 12
Funzioni Avanzate ............................. 35
Collegamento del proprio lettore per DVD .... 12
Collegamenti audio ........................................ 13
Collegamenti video ........................................ 14
Collegamento del connettore
AV CONNECTOR ..................................... 15
Collegamenti di telecomando del sistema ..... 15
Impostazione del blocco della visione ........... 35
Cambio del colore dello sfondo del
monitor..................................................... 36
Riproduzione di immagine ferma/al
rallentatore/per fotogrammi ..................... 37
Ricerca di titoli, capitoli, brani o locazioni su di
un disco .................................................... 38
Riproduzione ripetuta ..................................... 39
Riproduzione casuale ..................................... 40
Im postazione del lettore .................. 16
Uso di Setup Navigator .................................. 16
Riproduzione di brani in un ordine particolare
(riproduzione programmata) ..................... 41
Continuazione della riproduzione da una
posizione particolare (Last Memory) ........ 44
Per iniziare ad usare il
lettore DVD .................................... 19
Riproduzione di DVD, Video CD e CD............ 19
Evitamento di capitoli o brani in
Memorizzazione di impostazioni per
avanti/all’indietro ...................................... 21
Scansione in avanti all’indietro ....................... 21
Ripresa della riproduzione dadove era stata
interrotta .................................................. 22
DVD visti spesso (Condition Memory) ..... 45
Visione delle informazioni dei dischi .............. 46
Resettaggio del sistema ................................ 47
Abbandono della riproduzione e spegnimento
del lettore ................................................. 22
Inform azioni addizionali ................... 48
Cura Dei Dischi .............................................. 48
Perché l’unità duri a lungo ............................. 48
Lista codici di lingua ....................................... 50
Diagnostica .................................................... 51
Terminologia .................................................. 53
Dati tecnici ..................................................... 55
Im postazione video ed audio ........... 23
Uso dei menu della schermata Setup ............ 23
Passaggio al modo “Expert” del menu della
schermata Setup ...................................... 24
Compatibilità fra uscita digitale audio e
componente AV ....................................... 25
Regolazione della gamma dinamica audio ..... 26
Impostazione delle dimensioni del
televisore ................................................. 27
Impostazione del formato di uscita video per il
collegamento AV CONNECTOR ............... 28
Scelta del tipo di immagine ferma da
visualizzare ............................................... 28
Attivazione e disattivazione delle indicazioni
OSD ......................................................... 28
Impostazione della posizione delle indicazioni
OSD ......................................................... 28
Visione da un’angolazione desiderata
(funzione angolazioni multiple) ................. 29
5
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparazione del telecomando
Prima di fare
Inserim ento delle batterie
uso del lettore
1
Prem ere la linguetta del coperchio del
vano batterie verso il
centro del
telecom ando e tirare
quest’ultim o nella
direzione indicata
Controllo degli accessori in
dotazione
dalla freccia.
Prima di fare uso del lettore, controllare che possieda
tutti i seguenti accessori.
2
Inserire le batterie.
Cavo audio
Controllare le indicazioni
sul fondo del vano stesso
e fare attenzione che le
polarità (+) e (–) siano
orientate correttamente.
Cavo video
3
Richiudere il coperchio del vano batterie.
Cavo di alim entazione
Telecom ando
Note
• Non usare insieme batterie nuove e vecchie.
• Sostituire batterie esaurite solo con batterie nuove.
• Se non si prevede di non dovere usare il telecomando per
un lungo periodo, togliere le batterie dal loro vano per
evitare che una eventuale fuoriuscita di acido possa
causare danni. Se questa avviene, pulire accuratamente il
vano batterie dal fluido ed inserire batterie nuove.
• Quando recuperate le pile / batterie usate, fate riferimento
alle norme di legge in vigore nel vs. paese in tema di
protezione dell’ambiente.
5
5
Batterie a secco AA (R6P)
Istruzioni per l’uso (questo manuale)
Uso del telecom ando
Per usare il telecomando, puntarlo verso il sensore di
telecomando del pannello anteriore (Î). Il telecomando
può venire usato sino a 7 metri dal lettore ed entro 30
gradi dalla perpendicolare al pannello anteriore.
Note
• Se il sensore di telecomando viene colpito da luce solare
diretta o artificiale intensa, può non rispondere
normalmente ai comandi impartiti.
• Se la presa CONTROL IN del pannello posteriore del
telecomando viene collegata alla presa CONTROL OUT di
un altro componente, per controllare il lettore per DVD si
deve puntare il telecomando sul sensore dell’altro
componente. L’operazione col telecomando può risultare
impossibile se questo viene puntato sul sensore del lettore
per DVD (pagina 15).
30
30
7m
6
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Nome e funzione
delle varie parti
Pannello anteriore
1
2
4
6
3
5
DVD PLAYER
S TANDBY/ ON
0
4 1 ¡ ¢
7
8
3
Î
9
8 7
0
1 Pulsante
STANDBY/ ON (attesa/ accensione)
6 Pulsante di riproduzione 3
Premerlo per accendere o portare nel modo di attesa
Premerlo per iniziare o riprendere la riproduzione.
il lettore (pagine 19 e 22).
7 Pulsante di avanzam ento rapido ¡ ¢
2 Piatto portadisco
Premerlo per avanzare di un capitolo o brano.
Mantenerlo premuto per eseguire la scansione ad
alta velocità in avanti (pagina 21).
Quando si carica un disco, posarlo su questo piatto
con l’etichetta rivolta in alto (pagine 19 e 22).
8 Pulsante di ritorno 4 1
3 Pulsante di apertura e chiusura 0
Premerlo per indietreggiare di un capitolo o brano.
Mantenerlo premuto per eseguire la scansione ad
alta velocità all’indietro (pagina 21).
Premerlo per aprire e chiudere il piatto portadisco
(pagine 19 e 22).
4 Pulsante di arresto 7
9 Sensore di telecom ando
Premerlo per far cessare la riproduzione. Premerlo
una volta per poter riprendere la riproduzione dal
punto di interruzione. Premendolo due volte la
riproduzione cessa definitivamente e, se ripresa,
comincia dall’inizio del disco (pagina 22).
Puntare il telecomando verso questo sensore di
raggi infrarossi (pagina 6).
0 Display
Visualizza informazioni di vario tipo (pagina 8).
5 Pulsante di pausa 8
Premerlo durante la riproduzione per portarla nel
modo di pausa. Premerlo di nuovo per farla
riprendere (pagina 37).
7
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
1
2
4
9
6
7 8
0 -
=
~
3
5
DOLBY
DIGITAL
LAST
MEMO
GUI
DVD
VCD
CONDITION
TOTAL
REMAIN
CHP
TRK
TITLE
@
!
1 Indicatore VCD
L’indicatore VCD si accende quando viene caricato
9 Indicatore CONDITION
Indica che le impostazioni Condition Memory del
disco DVD attualmente in uso sono state
memorizzate (pagina 45).
un disco Video CD. Si accende invece l’indicatore CD
quando viene caricato un normale CD.
2 Indicatore DVD
0 Indicatore TOTAL
Si accende quando viene caricato un disco DVD.
Indica che il disco nel lettore è fermo e che
DISPLAY è stato premuto (pagina 47).
3 Indicatore
- Indicatore
Indica che la riproduzione ad angolazioni multiple è in
Indica che la funzione di ripetizione è attivata e che il
titolo, capitolo o brano attuale viene ripetuto (pagina
39).
corso (pagina 29).
4 Indicatore TITLE
Indica il numero del titolo attuale.
= Indicatore DOLBY DIGITAL
Indica la riproduzione audio Dolby Digital.
5 Indicatore TRK
Indica il numero del brano al momento riprodotto.
~ Indicatore LAST MEMORY
Indica che i dati Last Memory del disco DVD o Video
CD al momento in uso sono stati registrati in
memoria (pagina 44).
6 Indicatore CHP
Indica il numero del capitolo al momento riprodotto.
7 Indicatore GUI
! Contatore
Indica che un’operazione con i menu sullo schermo è
attualmente in corso (pagine 16 e 23).
Visualizza il modo di riproduzione, il tipo di disco
usato, il titolo ed il numero di capitolo/brano, il tempo
di riproduzione, ecc.
8 Indicatore REMAIN
@ Indicatore 83
Indica che il tempo di riproduzione rimanente di un
titolo o capitolo/brano è al momento visualizzato.
L’indicatore 3 si illumina se un disco sta venendo
riprodotto. Se la riproduzione è in pausa, si accende
l’indicatore 8.
8
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Pannello posteriore
1
2
3
5
6
4
DV-535
AC IN
DIGITAL OUT
DIGITAL
OUT
TV SYSTEM
AUDIO OUT
VIDEO
OUT
OPT
AV CONNECTOR
CONTROL
IN
L
R
PAL
NTSC AUTO
S-VIDEO
OUT
9
8 7
1 Presa AV CONNECTOR
6 Term inali di collegam ento dei cavi di
alim entazione AC IN
Usare un cavo SCART a 21 piedini per collegare
quest’unità ad un televisore o monitor compatibile.
Sia il segnale video che quello audio vengono emessi
dalla presa AV CONNECTOR (pagina 15).
Usarli per collegare il cavo di alimentazione diretto ad
una presa a muro (pagina 12).
7 Presa S-VIDEO OUT
2 Selettore TV SYSTEM
Se il vostro televisore o monitor possiede un
ingresso S-Video, una riproduzione video chiara è
possibile collegando un lettore al proprio televisore o
monitor attraverso la presa S-Video (pagine 14).
Usare questo selettore per scegliere il sistema di
colore usato dal proprio televisore, PAL o NTSC, a
seconda del segnale da riprodurre. Se si trova nella
posizione AUTO, il lettore emette segnale dello
stesso formato contenuto dal disco (pagina 14).
8 Presa VIDEO OUT
Collegarla ad un ingresso video di un televisore,
monitor, amplificatore o sintonizzatore AV dotati di
ingresso video (pagine 12 e 14).
3 Presa DIGITAL OUT (Coassiale)
Viene usata per emettere il segnale audio digitale
contenuto su dischi. Si può emettere il segnale
digitale via una delle due prese per cavo coassiale e
mandarlo ad un amplificatore o ricevitore AV (pagina
13).
9 Prese AUDIO OUT
Usarle per mandare segnale audio a due canali
(analogico) alle prese di ingresso analogico. Se vi
state collegando ad un sintoamplificatore che
possiede sia ingressi digitali che analogici per il
collegamento di un lettore per DVD, può essere utile
fare ambedue i collegamenti (pagine 12 e 13).
4 Presa DIGITAL OUT (optica (OPT.))(solo DV-
535)
Viene usata per emettere il segnale audio digitale
contenuto su dischi. Si può emettere il segnale
digitale via una delle due prese per cavo a fibre
ottiche e mandarlo ad un amplificatore o ricevitore
AV (pagina 13).
5 Prese CONTROL
Usare questa presa per collegare questo lettore ad
un altro componente che porti il marchio Pioneer Î.
Ciò permette di controllare quest’unità come se
fosse un componente del sistema. Le operazioni del
lettore sono quindi eseguite puntando il
telecomando verso il componente cui il lettore è
collegato (pagina 15).
9
It
Download from Www.Somanuals.com. All Manuals Search And Download.
(I pulsanti indicati con un asterisco * sono usati per
controllare i menu.)
Telecomando
1 Pulsante LAST MEMORY
Si può far riprendere la riproduzione di DVD o Video
CD dal punto riprodotto per ultimo anche se il disco
nel frattempo è stato tolto. Premere il pulsante
LAST MEMORY durante la riproduzione per
memorizzare tale punto. Per riprendere la
riproduzione da tale punto, premere di nuovo il
pulsante LAST MEMORY a lettore fermo. Le
locazioni Last Memory possono venire memorizzate
per sino a cinque DVD, o quattro DVD ed un Video
CD (pagina 44).
#
1
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
$
%
^
2
REP EAT
ANGLE
SUB TITLE
AUDIO
S ETUP
3
4
5
6
7
REP EAT
A-B
M ENU TOP MENU
&
*
(
RETURN
DISPLAY
¶
5
¶
2 Pulsante
(attesa/ accensione)
8
9
0
Premerlo per accendere o portare nel modo di attesa
il lettore (pagine 19 e 22).
2
NEXT
P REV
¢
4
5
)
_
+
¶
¶
3 Pulsante AUDIO
P LAY
3
PAUS E
8
S TOP
7
Premere più volte questo pulsante per scegliere una
lingua per il sonoro e/o dei formati audio
programmati su di un DVD (pagina 31).
Per quanto riguarda i Video CD ed i CD, ciascuna
pressione cambia il segnale audio in uscita nel modo
seguente.
-
=
¶
FW D
¡
1REV
eS TEP / S LOW
E
¡
™
CLEAR
+1 0
0
3
6
9
2
1
5
4
7
~
8
=
Stereo = 1/ L (sinistro) = 2/ R (destro)
PROGRAM SEARCH MODE
RANDOM
Î
!
@
4 Pulsante SUBTITLE
£
Premerlo più volte per scegliere una delle lingue per i
sottotitoli programmate sul DVD o per disattivare i
sottotitoli stessi (pagina 32).
5 Pulsante SETUP*
Premere questo pulsante quando il lettore si trova
nel modo di riproduzione o è fermo per aprire e
chiudere la schermata Setup (pagine 16 e 23).
6 Pulsante MENU*
Usare questo pulsante per visualizzare o chiudere la
schermata del menu di un DVD (pagina 20).
7 Pulsante DISPLAY
Premere questo pulsante durante la riproduzione per
visualizzare informazioni sul contenuto del disco.
Premerlo più volte per visualizzare informazioni
differenti (pagina 46).
8 Pulsanti del cursore (2/ 3/ 5/ ∞)*
Usare questi pulsanti per spostarsi lungo le opzioni
sulle schermate dei menu e cambiare le opzioni
scelte.
9 Pulsante ENTER*
Usato per attivare impostazioni scelte con i pulsanti
del cursore o per impostare elementi evidenziati di
un menu.
0 Pulsanti PREV 4 (precedente)
Durante la riproduzione, premere PREV 4 per
ritornare al capitolo o brano precedente (pagine 20 e
21).
10
It
Download from Www.Somanuals.com. All Manuals Search And Download.
- Pulsante STOP 7
( Pulsante RETURN*
Premerlo per fare cessare la riproduzione.
Premendolo una sola volta si permette la ripresa
della riproduzione dal punto di interruzione.
Premendolo invece due volte la riproduzione
riprende dall’inizio del disco (pagina 22).
Premere questo pulsante per passare al menu
precedente mantenendo le impostazioni attuali. Fare
uso di RETURN se non si desidera cambiare le
impostazioni in un menu.
) Pulsanti NEXT ¢
= Pulsanti STEP/ SLOW e/ E
Durante la riproduzione, premere NEXT ¢ per
passare al capitolo o brano successivo (pagine 20 e
21).
Premere STEP/ SLOW E durante la riproduzione
per dare inizio al rallentatore. Nel modo di pausa,
premere il pulsante STEP/ SLOW E per fare
avanzare i DVD o Video CD di un fotogramma alla
volta e STEP/ SLOW e per farli indietreggiare di un
fotogramma alla volta (pagina 37).
_ Pulsante PLAY 3
Premere questo pulsante per iniziare la riproduzione
di un disco.
~ Pulsanti num erici (1-9, 0, +10)*
+ Pulsante PAUSE 8
Usati per eseguire la ricerca diretta di titoli e capitoli
o brani, e per impostare valori numerici.
Premerlo per portare in pausa la riproduzione di un
disco (pagina 37).
! Pulsante RANDOM
¡ Pulsanti 1 REV/ FWD ¡ (riavvolgim ento e
Premere questo pulsante per riprodurre capitoli o
brani in ordine casuale (pagina 40).
avanzam ento rapido)
Durante la riproduzione di DVD e Video CD, premere
FWD ¡ per avanzare lungo un brano. Premere
invece REV 1 per tornare indietro. Quando si
carica un CD, viene eseguita la stessa operazione,
ovviamente solo per la porzione audio (pagina 21).
@ Pulsante PROGRAM
Si possono programmare titoli, capitoli o brani da
riprodurre in un ordine desiderato qualsiasi. I
programmi possono possedere un massimo di 24
fasi. Inoltre, è possibile memorizzare dei programmi
DVD per sino a 24 dischi per poterne fare uso in
futuro (pagine dalla 41 alla 43).
™ Pulsante CLEAR
Funziona insieme ad un certo numero di funzioni del
lettore. Usarlo per cancellare la riproduzione casuale
e ripetuta e per editare programmi.
# Pulsante CONDITION MEMORY
Si possono memorizzare le impostazioni di sino a 15
DVD. Premere CONDITION MEMORY durante la
riproduzione di un DVD per memorizzarne le
impostazioni (pagina 45).
£ Pulsante SEARCH MODE
Premere questo pulsante per ricercare un titolo, un
capitolo o brano o col metodo di ricerca ad intervallo
di tempo (pagina 38).
$ Pulsante OPEN/ CLOSE
Premere questo pulsante per aprire o chiudere il
piatto portadisco (pagine 19 e 22).
% Pulsante ANGLE
Alcuni DVD possiedono scene registrate da varie
angolazioni. Premere il pulsante ANGLE più volte per
visualizzare ciascuna differente angolazione
(pagina 29).
^ Pulsante REPEAT
Premere questo pulsante una volta per ripetere la
riproduzione del capitolo o brano attuale. Premerlo
due volte per ripetere la riproduzione del titolo
attuale (pagina 39).
& Pulsante REPEAT A-B
Premere questo pulsante all’inizio ed alla fine di un
passaggio del disco che si vuole ripetere o per
contrassegnare una posizione cui si desidera poter
tornare (pagina 39).
* Pulsante TOP MENU*
Premere questo pulsante per richiamare il menu
principale programmato sul DVD. A seconda del DVD
usato, il menu principale può essere identico o meno
a quello del DVD stesso (pagina 20).
11
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Guida al collegam ento
Collegamenti
Le illustrazioni su questa pagina mostrano i collegamenti
base con i cavi audio e video allegati al lettore. Usare
quest’illustrazione solo come un suggerimento per i
collegamenti da fare a casa vostra.
Una spiegazione esauriente di ciascun tipo di
collegamento audio e video può venire trovata alle
pagine dalla 13 alla 15. Per determinare i collegamenti
audio e video più adatti al proprio caso, consultare i
manuali in dotazione ai componenti da collegare.
Collegamento del proprio
lettore per DVD
A differenza degli altri formati multimediali, DVD offre
una grande quantità di possibilità di emissione di segnale
audio e video utilizzabili con un gran numero di differenti
configurazioni, da un televisore standard con ingresso
audio stereo ad un sistema di cinema per casa con un
televisore o monitor e grandi capacità di circondamento.
Oltre ad effettuare i collegamenti fisici con televisore o
monitor, è necessario definire le dimensioni dello
schermo. A questo scopo si può usare [Setup
Navigator] nella schermata General della schermata
Setup per impostare l’uso di uno schermo Wide o
televisivo standard (pagina 17). Inoltre, si può fare uso
delle impostazioni [TV Screen] del menu Video della
schermata Setup (pagina 27).
Note
• Quando si fanno collegamenti con quest’unità o quando si
cambiano i collegamenti, controllare che quest’unità sia
spenta premendo il pulsante
STANDBY/ ON e scollegare
poi il cavo di alimentazione dalla presa.
• Le uscite video analogiche di questo lettore usano circuiti di
protezione dei diritti d’autore che impediscono la
duplicazione di DVD. Se si collega il lettore ad un televisore
attraverso un videoregistratore o si registra e riproduce il
contenuto di un disco con un videoregistratore, la
riproduzione può non essere normale.
DV-535
AC IN
DIGITAL OUT
DIGITAL
OUT
TV SYSTEM
AUDIO OUT
VIDEO
OUT
OPT
AV CONNECTOR
CONTROL
L
IN
R
PAL
NTSC AUTO
S-VIDEO
OUT
Cavo audio
(accluso)
Cavo video
(accluso)
Infine, collegare il cavo ad
una presa di corrente
alternata da 220 - 240 V.
Televisore o m onitor
L
R
VIDEO IN S-VIDEO IN
AUDIO IN
Fare i collegam enti audio dalle prese AUDIO
OUT del lettore a quelle AUDIO IN del
televisore o m onitor usando i cavi audio
acclusi al lettore. Controllare di aver
accoppiato le prese e le spine di ugual colore
(rosso e bianco).
Fare i collegam enti video fra la presa VIDEO
OUT del lettore e quella VIDEO IN del
televisore o m onitor usato con il cavo video
accluso al lettore.
12
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Uscita DIGITAL OUT (coassiale)
Il segnale digitale viene trasmesso elettronicamente
attraverso un cavo coassiale.
Collegamenti audio
Questo lettore possiede due uscite digitali (ottica e
coassiale) ed uscite audio digitali.
•
Usare questa presa per collegare un amplificatore AV
o sintoamplificatore con decodificatore sistema Dolby
Digital, DTS o MPEG incorporato.
Collegam enti digitali audio:
Si può riprodurre il segnale audio digitale contenuto da
dischi DVD sia con l’uscita digitale coassiale che con
quella ottica.
•
Usare un cavo coassiale (non in dotazione) per
collegare DIGITAL OUT (l’uscita digitale coassiale) del
lettore all’ingresso coassiale digitale dell’amplificatore
AV o sintoamplificatore.
Nel fare i collegam enti digitali audio, non collegare
contem poraneam ente le uscite coassiale e digitale
allo stesso com ponente.
DV-535
AC IN
DIGITAL OUT
DIGITAL
OUT
TV SYSTEM
AUDIO OUT
VIDEO
OUT
OPT
AV CONNECTOR
CONTROL
IN
R
L
PAL
NTSC AUTO
Se viene caricato un DVD registrato con i sistemi Dolby
Digital, DTS o MPEG, se si sono fatti i collegamenti
attraverso le prese audio digitali con un
S-VIDEO
OUT
sintoamplificatore o amplificatore che non può
decodificare segnali di tale formato verrà prodotto solo
rumore. In questo caso, non mancare di impostare con
Setup Navigator l’audio che meglio riflette le possibilità
del vostro sistema (pagina 18). Inoltre, le impostazioni
digitali audio possono venire regolate manualmente nel
menu Audio 1 della schermata Setup (pagine 25 e 26).
DIGITAL OUT
DIGITAL IN
Uscita DIGITAL OUT (ottica) (solo DV-535)
Il segnale digitale viene trasmesso come impulsi
luminosi in un cavo a fibre ottiche.
•
Usare questo cavo per collegare il lettore ad un
amplificatore AV o sintoamplificatore AV dotato di
decodificatore Dolby Digital, DTS o MPEG.
Am plificatore AV o sintoam plificatore
con decodificatore sistem a Dolby
Digital, DTS o MPEG incorporato
•
Usare un cavo a fibre ottiche (non in dotazione) per
collegare DIGITAL OUT OPT (l’uscita digitale ottica)
del lettore all’ingresso di un amplificatore o
sintoamplificatore AV.
Collegam enti audio analogici
Uscita AUDIO OUT
• Collegare le uscite audio analogiche agli ingressi di un
amplificatore o sintoamplificatore stereo.
DV-535
• I collegamenti audio analogici possono venire fatti
anche con un televisore o monitor dotato di ingressi
stereo.
AC IN
DIGITAL OUT
DIGITAL
OUT
TV SYSTEM
AUDIO OUT
VIDEO
OUT
OPT
AV CONNECTOR
CONTROL
IN
R
L
PAL
NTSC AUTO
S-VIDEO
OUT
• Usare il cavo audio in dotazione per collegare le uscite
AUDIO OUT del lettore all’ingresso audio
dell’amplificatore o sintoamplificatore stereo.
DIGITAL
OUT
OPT
• Nel fare collegamenti audio, collegare spine e prese di
colore analogo (rosso e bianco).
DV-535
DIGITAL IN
AC IN
DIGITAL OUT
DIGITAL
OUT
TV SYSTEM
AUDIO OUT
VIDEO
OUT
OPT
AV CONNECTOR
CONTROL
IN
R
L
PAL
NTSC AUTO
S-VIDEO
OUT
R
L
AUDIO OUT
Am plificatore o sintoam plificatore
AV con decodificatore sistem a
Dolby Digital, DTS o MPEG
incorporato.
AUDIO IN
R
L
Am plificatore o
sintoam plificatore stereo
13
It
Download from Www.Somanuals.com. All Manuals Search And Download.
SISTEMA DI COLORE
L’uscita video cambia nel modo seguente a seconda del
formato di riproduzione del disco.
Collegamenti video
Questo lettore possiede uscite S-Video e video
composite per extra. Controllare il manuale in dotazione
al vostro televisore o monitor per determinare il miglior
collegamento possibile per il vostro sistema.
Oltre ad effettuare i collegamenti fisici con un televisore o
monitor, è necessario definire le dimensioni dello
schermo. A questo scopo si può usare [Setup Navigator]
nella schermata General della schermata Setup per
impostare l’uso di uno schermo Wide o televisivo standard
(pagina 17). Inoltre, si può fare uso delle impostazioni [TV
Screen] della schermata Setup del menu Video (pagina
27).
La conversione NTSC = PAL, PAL = NTSC è possibile
nel caso di Video CD. Quella PAL = NTSC non è invece
possibile nel caso di dischi DVD. Se il selettore TV
SYSTEM viene portato sulla posizione AUTO, il formato
del disco viene emesso come si trova. Se al momento
non è caricato un disco CD o di altro tipo, viene scelto il
formato di uscita video usato per ultimo.
TV SYSTEM
PAL
NTSC
AUTO
Uscita S-VIDEO OUT
•
Per ottenere immagini di alta qualità, collegate i
terminali S-Video di quest’unità a quelli S-Video di un
televisore o monitor.
•
Usare un cavo S-Video (non in dotazione) per collegare
la presa S-VIDEO del lettore all’ingresso S-Video del
televisore o monitor.
Disco
Form ato
Form ato di uscita
P
osizione del selettore TV SYSTEM
Tipo
NTSC
NTSC
PAL
MOD. PAL
PAL
AUTO
NTSC
DV-535
NTSC
PAL
DVD
AC IN
PAL
DIGITAL OUT
DIGITAL
OUT
TV SYSTEM
AUDIO OUT
VIDEO
OUT
OPT
AV CONNECTOR
CONTROL
IN
R
L
PAL
NTSC AUTO
S-VIDEO
OUT
NTSC
NTSC
NTSC
MOD. PAL
PAL
NTSC
Video CD
NTSC
PAL
PAL
CD, nessun
disco
PAL
NTSC o PAL
S-VIDEO
OUT
A proposito di MOD. (m odulazione) PAL
•
SHRINK (CONTRAZIONE)
La maggior parte dei modelli di televisore del nuovo
tipo PAL rileva automaticamente la frequenza a 50 Hz
(PAL) o 60 Hz (NTSC)e cambia automaticamente
l’ampiezza verticale, producendo un’immagine di
dimensioni corrette.
S-VIDEO IN
•
Se il vostro televisore PAL non possiede un controllo
di sintonia verticale, può accadere che la visione di un
disco NTSC risulti impossibile perché l’immagine
continua a girare verticalmente. Se invece lo possiede,
girare il controllo di sintonia verticale sino a che
l’immagine non smette di ruotare. In alcuni televisori,
l’immagine può contrarsi verticalmente, lasciando due
fasce nere in alto ed in basso sullo schermo. Questo
non è un guasto, ma una conseguenza inevitabile della
conversione NTSC = PAL.
Televisore o m onitor
VIDEO OUT
•
Collegare i terminali di uscita video composita ad un
televisore o monitor standard dotato di un ingresso video.
Usare il cavo video in dotazione per collegare la presa
VIDEO OUT del lettore all’ingresso video del
televisore o monitor.
•
•
Controllare di aver fatto coincidere i colori della spina e
della presa (giallo).
DV-535
AC IN
DIGITAL OUT
DIGITAL
OUT
TV SYSTEM
AUDIO OUT
VIDEO
OUT
OPT
AV CONNECTOR
CONTROL
IN
R
L
PAL
NTSC AUTO
S-VIDEO
OUT
VIDEO
OUT
VIDEO IN
14
Televisore o m onitor
Download from Www.Somanuals.com. All Manuals Search And Download.
It
Collegamento del connettore
AV CONNECTOR
Collegamenti di telecomando
del sistema
Servendosi di un cavo di tipo SCART a 21 piedini del tipo
normalmente in commercio, collegare la presa AV
CONNECTOR del lettore ad un televisore o monitor e
così ottenere un collegamento audio e video allo stesso
tempo.
Servirsi di un cavo a mini spinotto da 3,5 mm di diametro
senza resistenza del tipo comunemente in commercio
per collegare la presa CONTROL IN alla presa
CONTROL OUT di un altro componente PIONEER che
porti il marchio Î, si può controllare il lettore come se
fosse un componente asservito del sistema.
• Oltre a fare i collegamenti fisici fra il vostro televisore
o monitor e quest’unità, è anche necessario impostare
il formato di uscita video su composito, S-Video o RGB
nel menu Video della schermata Setup (pagina 28).
• I cavi SCART sono disponibili in varie configurazioni.
Prima di fare i collegamenti, controllare che il cavo che
volete usare sia del tipo giusto per il televisore o
monitor che si intende usare.
•
Se si collega il sistema in questo modo, il lettore non
può più venire controllato in modo diretto. Il
telecomando deve quindi venire puntato verso il
componente, ad esempio un amplificatore AV, cui il
lettore è collegato attraverso la presa CONTROL
OUT.
•
•
Se si controlla il sistema in questo modo, controllare di
aver eseguito i collegamento con l’amplificatore
usando cavi audio o video anche quando si usano
componenti solo digitali.
• La sezione ‘Dati tecnici’ a pagina 55 del manuale
contiene una descrizione del segnale di ciascun
piedino di AV CONNECTOR.
Per maggiori dettagli, consultare i manuali in dotazione
a ciascuno dei componenti collegati.
DV-535
AC IN
DIGITAL OUT
DIGITAL
OUT
TV SYSTEM
AUDIO OUT
VIDEO
OUT
OPT
AV CONNECTOR
CONTROL
IN
R
L
PAL
NTSC AUTO
DV-535
S-VIDEO
OUT
AC IN
DIGITAL OUT
DIGITAL
OUT
TV SYSTEM
AUDIO OUT
VIDEO
OUT
OPT
AV CONNECTOR
CONTROL
IN
R
L
PAL
NTSC AUTO
S-VIDEO
OUT
AV CONNECTOR
Televisore o m onitor
CONTROL
IN
CONTROL
OUT
Com ponente Pioneer
col m archio Î.
15
It
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Prem ere il pulsante STANDBY/ ON del
pannello anteriore ( sul telecom ando).
Impostazione
del lettore
Prem ere il pulsante SETUP.
Quando SETUP viene premuto per la prima volta,
appare la seguente schermata. Nonostante Setup
Navigator possa venire usato più di una volta,
questa schermata appare solo la prima volta che
SETUP viene premuto.
Uso di Setup Navigator
Setup Navigator è stato progettato per semplificare il
lavoro di impostazione del lettore DVD. Consistente in
una serie di domande a risposta multipla che appaiono
sullo schermo, Setup Navigator imposta
Audio1 Audio2 Video Language General
Setup Navigator
Setup Navigator
Start
Auto Start Off
automaticamente le impostazioni audio, video e di lingua
a seconda delle risposte date. Una volta che questa
procedura è stata portata a termine, sarà possibile
iniziare a riprodurre DVD.
ENTER
SETUP
Exit
Move
Select
La procedura di questa pagina descrive le operazioni
necessarie per l’uso delle schermate di Setup Navigator.
Una descrizione dettagliata del contenuto di ciascuna
domanda che appare sullo schermo appare alla pagina
che segue.
3
4
Usare i pulsanti del cursore (5/ ∞) per fare
una selezione.
•
Se si intende usare Setup Navigator, non è
necessario cambiare l’impostazione della prima
schermata. Si può quindi procedere con la
seconda.
Quando si im posta il lettore per la prim a volta
Alcuni DVD vengono riprodotti automaticamente nel
momento in cui vengono caricati. È quindi
raccomandabile impostare il lettore con Setup Navigator
prima di caricare e riprodurre il proprio primo DVD. Se un
disco DVD è già caricato, premere il pulsante STOP 7
per farlo fermare.
•
Se si desidera im postare il lettore DVD senza
fare uso di Setup Navigator, usare il pulsante
del cursore (∞) per scegliere [Auto Start Off].
La funzione Setup Navigator potrà ancora venire
usata in seguito nell’uso del menu della
schermata di Setup (pagina 23).
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
Prem ere ENTER.
La selezione fatta viene finalizzata e la schermata
successiva di Setup Navigator appare.
1
2
3
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
REP EAT
A-B
M ENU TOP MENU
RETURN
DISPLAY
5
¶
¶
2
4
Servirsi della fasi 3 e 4 come base per impostare dati in
tutte le schermata di Setup Navigator descritte nelle
pagine seguenti.
NEXT
¢
P REV
4
5
¶
¶
P LAY
3
PAUS E
8
S TOP
7
¶
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
Per cam biare la risposta ad una dom anda
precedente
+1 0
5
4
7
0
8
Usare il pulsante del cursore (2) per tornare alla
schermata desiderata. Tenere presente però che non si
può andare avanti con il ,pulsante del cursore (3) e sarà
quindi necessario rispondere di nuovo a tutte le
domande dopo la schermata cui si era tornati.
PROGRAM SEARCH MODE
RANDOM
Î
Per abbandonare Setup Navigator
Premere SETUP in qualsiasi schermata e si esce da
Setup Navigator. Tenere presente che se si esce da
Setup Navigator prima di rispondere a tutte le domande,
non viene fatta alcuna impostazione.
1
DVD PLAYER
S
TANDBY/ ON
0
4 1 ¡ ¢
7
8
3
Per tornare alla scherm ata Setup
Î
Premere RETURN. Si esce da Setup Navigator e appare
la schermata del menu General della schermata Setup.
Tenere presente che nessuna impostazione viene fatta
se RETURN viene premuto prima che Setup Navigator
abbia terminato il lavoro.
16
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Im postazione della lingua di
visualizzazione sullo scherm o
(OSD)
La schermata OSD [OSD Language] (visualizzazione
sullo schermo) permette di definire la lingua di
visualizzazione sullo schermo, vale a dire la lingua usata
dal lettore DVD per i menu e i messaggi sullo schermo.
Inoltre, la lingua scelta per la visualizzazione sullo
schermo viene usata anche per l’audio e la lingua dei
sottotitoli.
Im postazione delle dim ensioni
dello scherm o
La schermata [TV Type] permette di scegliere le
proporzioni dello schermo televisivo o monitor usato. Il
rapporto larghezza/altezza di un televisore normale è di
4:3, mentre quelle dello schermo Wide di un televisore
ad alta definizione sono di 16:9. Queste cifre sono quindi
chiamate le proporzioni dello schermo.
Audio1 Audio2 Video Language General
Setup Navigator
TV Connection
Audio1 Audio2 Video Language General
TV Type
Widescreen (16:9)
Standard (4:3)
Setup Navigator English
français
Language
Deutsch
Italiano
Español
ENTER
SETUP
Exit
Move
Select
OSD Language
ENTER
SETUP
Exit
Move
Select
Impostazioni : Widescreen (16:9)*
Standard (4:3)
* Impostazione di fabbrica
Impostazioni : English*
français
Deutsch
Italiano
Nota
I DVD di formato Wide sono visualizzati in due formati
differenti, quello “Letter box” e quello “Pan&scan”. Se
[Standard 4:3] viene scelto con Setup Navigator, ciene
automaticamente impostato quello “Letter box”. Per passare
allíimpostazione di quello pan&scan, cambiare il menu Video
della schermata Setup [TV screen] (pagina 27).
Español
* Impostazione di fabbrica
Nota
Oltre ad impostare la [OSD Language], in questo momento
vengono cambiate anche l’audio e dei sottotitoli. Se si
desidera cambiare l’audio o la lingua dei sottotitoli, fare le
modifiche necessarie nel menu Language ([Audio
Language] e [Subtitle Language]) della schermata Setup
(pagine 30 e 32).
17
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Im postazione di collegam enti
digitali audio con un am plificatore
o decodificatore AV
Conferm a delle im postazioni
La schermata [Exit Setup Navigator] è quella finale di
Setup Navigator.
La schermata [Digital J ack] stabilisce se si sono fatti
collegamenti digitali con un amplificatore o
sintoamplificatore AV esterno o ancora un decodificatore
esterno, Dato che sono a disposizione più opzioni,
consultare il manuale del componente da collegare per
determinare quali formati audio è in grado di leggere. Se
non si sono fatti collegamenti, scegliere [Not
Connected].
Audio1 Audio2 Video Language General
Setup Navigator
Save Changes
Exit Setup Navigator
Delete Changes
Start Again
ENTER
SETUP
Exit
Move
Select
Audio1 Audio2 Video Language General
Setup Navigator Dolby Digital
Dolby Digital/DTS
Impostazioni : Save Changes*
Da scegliere per far sì che il lettore
faccia tutte le scelte audio, video e di
lingua necessarie a seconda delle
riposte che date in Setup Navigator.
Amp Connection
Dolby Digital/MPEG
Dolby D/DTS/MPEG
Digital Jack
PCM
Not Connected
Delete Changes
ENTER
SETUP
Exit
Move
Select
Scegliere quest’opzione per uscire da
Setup Navigator senza cambiare alcuna
impostazione del sistema.
Impostazioni : Dolby Digital*
Start Again
Dolby Digital/ DTS
Scegliere di tornare alla schermata
[OSD Language] di Setup Navigator e
rifare le impostazioni.
Dolby Digital/ MPEG
Dolby D/ DTS/ MPEG
PCM
* Impostazione di fabbrica
Not Connected
* Impostazione di fabbrica
Per uscire dalla scherm ata Setup
Completate le impostazioni del lettore con Setup
Navigator o deciso di uscire da Setup Navigator, appare
la schermata di Setup General. Premere SETUP per fare
chiudere la schermata Setup.
Com patibilità im postazioni con
l’uscita a 96 kHz
La schermata [96 kHz PCM Audio] determina se il
componente AV collegato è capace di processare
segnale audio a 96 kHz o meno. Questa schermata
appare solo se si sono fatti collegamenti con componenti
AV esterni segnalati nelle schermate precedenti.
Per cam biare le altre im postazioni dei m enu
della scherm ata Setup
La procedura di modifica delle impostazioni dei menu
della schermata Setup viene descritta a pagina 23.
Audio1 Audio2 Video Language General
Setup Navigator
Amp Connection
96 kHz PCM Audio
No
Yes
Don't Know
ENTER
SETUP
Exit
Move
Select
Impostazioni : No*
Scegliere quest’opzione se il
componente AV collegato non può
processare segnale di frequenza di
campionamento pari a 96 kHz.
Yes
Scegliere quest’opzione se il
componente AV collegato può
processare segnale di frequenza di
campionamento pari a 96 kHz.
Don’t Know
Scegliere quest’opzione se non si sa se
il componente AV collegato può
processare segnale di frequenza di
campionamento pari a 96 kHz.
* Impostazione di fabbrica
18
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Per iniziare ad
usare il lettore
DVD
1
2
Prem ere , o STANDBY/ ON del pannello
anteriore.
Prem ere il pulsante OPEN/ CLOSE (0 del
pannello anteriore.)
Il piatto portadisco fuoriesce.
3
Caricare un disco.
Esso va caricato con l’etichetta rivolta in alto ed
usando le guide per allinearlo correttamente.
Riproduzione di DVD, Video
CD e CD
– DVD/Video CD/CD
Prima di poter godere dei benefici del sistema DVD,
dovete terminare le impostazioni con Setup Navigator
descritte nella sezione precedente o aver fatto le
impostazioni necessarie nei menu della schermata Setup
descritti nella sezione seguente così da preparare il
lettore per la riproduzione col vostro sistema audio. Fatte
le regolazioni, potete riprodurre DVD, Video CD e CD
audio.
3
8
7
¢
¡
1
4
4
5
Prem ere il pulsante PLAY 3 (3 del
pannello anteriore).
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
•
Il piatto portadisco si chiude e la riproduzione ha
inizio.
1
5
2
5
REP EAT
ANGLE
AUDIO
S ETUP
SUB TITLE
REP EAT
A-B
•
A seconda del disco usato, può venire
visualizzato un m enu. In tal caso, procedere
con la fase 5.
M ENU TOP MENU
RETURN
DISPLAY
5
¶
¶
2
NEXT
¢
P REV
Scegliere la voce che si desidera vedere.
4
5
¶
¶
•
Se si è caricato un DVD:
P LAY
3
PAUS E
8
S TOP
7
¶
Scegliere la voce desiderata con i pulsanti del
cursore (2/3/5/∞) o quelli num erici, quindi
premere il pulsante ENTER.
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
4
+1 0
5
4
7
•
Se si è caricato un Video CD:
0
8
Usare i pulsanti num erici per scegliere la voce
desiderata.
PROGRAM SEARCH MODE
RANDOM
Î
Note
•
Se si collega questo lettore ad un amplificatore o
sintoamplificatore che non possiede un decodificatore, la
riproduzione consiste solo di rumore. Controllare che il
formato di uscita audio digitale scelto nel menu Audio 1
corrisponda ai componenti audio collegati al lettore (pagine
25 e 26).
1
3
2
4
•
Le proporzioni dello schermo sono impostate in fabbrica su
Wide (16:9). Se si possiede un televisore normale di
proporzioni 4:3, cambiare le impostazioni col meno Video
della schermata Setup (pagina 27).
DVD PLAYER
S
TANDBY/ ON
0
4 1 ¡ ¢
7
8
3
Î
Se un’operazione è proibita
A volte un’operazione che dovrebbe essere possibile
fallisce senza una ragione plausibile. In tal caso, sullo
schermo appare una delle seguenti due icone.
L’operazione viene proibita dal lettore.
L’operazione viene proibita dal disco.
19
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Per aprire o tornare al m enu di un disco DVD o
Video CD
Se viene visualizzato un m enu
I DVD che possiedono informazioni relative a menu ed i
Video CD compatibili col sistema Playback Control (PBC)
possono visualizzare sullo schermo dei menu. I DVD
infatti spesso contengono informazioni addizionali
raggiungibili attraverso i loro menu e che a volte sono
tanto affascinanti e divertenti da navigare quanto il disco
vero e proprio.
Nonostante questo dettaglio differisca da disco a disco,
di solito premendo MENU, TOP MENU o RETURN nel
caso di un DVD o RETURN in quello di un Video CD si fa
comparire la schermata del menu. Per maggiori dettagli
in proposito, consultare la custodia del disco DVD o
Video CD e la loro documentazione.
Per navigare un m enu
OPEN/
•
Nonostante i titoli dei vari dischi DVD siano differenti,
quando viene visualizzato un menu, servirsi dei
pulsanti del cursore (2/3/5/∞) ed ENTER del
telecomando. Quelli del cursore servono per scegliere
voci di un menu e quello ENTER per finalizzare la
scelta fatta.
CONDITION CLOSE
MEMORY
LAST
MEMORY
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
MENU
TOP MENU
REP EAT
A-B
M ENU TOP MENU
RETURN
DISPLAY
5
¶
¶
RETURN
ENTER
Pulsanti del
cursore
•
•
Occasionalmente, i pulsanti num erici possono
essere utilizzabili per scegliere voci da un menu. Per
fare scelte nelle schermate dei menu dei Video CD
vengono usati solo i pulsanti num erici.
2
NEXT
¢
P REV
4
5
¶
¶
NEXT ¢
PREV 4
P LAY
3
PAUS E
8
S TOP
7
¶
STOP 7
1REV FW D
¡
eS TEP / S LOW
E
Se un Video CD possiede più di un menu, le pagine
possono venire cambiate premendo i pulsanti PREV
4 o NEXT ¢.
CLEAR
2
3
6
9
1
Pulsanti
num erici
+1 0
5
4
7
0
8
PROGRAM SEARCH MODE
RANDOM
Per riprodurre Video CD senza visualizzare
scherm ate di m enu
Î
I Video CD dotati di sistema PBC (Playback Control)
visualizzano un menu sullo schermo non appena la
riproduzione viene iniziata. Si può comunque riprodurre
Video CD senza far comparire tali menu. Per farlo,
premere il pulsante STOP 7 quando si carica un Video
CD PBC compatibile e quindi il pulsante num erico
corrispondente al brano desiderato.
Esem pio: se si usa un DVD che possiede menu
1 Highlight Clips
2 Chapter List
3 Commercial Header
4 Subtitles
5 Soundtrack
6 Start Main Feature
Esem pio: se si usa un disco Video CD PBC compatibile
STANDARD VOCAL BEST
1
2
3
4
5
6
7
8
Don't Tekno for an Answer
Bad Whack Naff Riff
dubmyheadbassman
Gooey Love Jingle
Praise the Day
Bertie B.& the Goans
Hood in the Boyz
Sleek Machine
Philip William
Formerly an Artist
Pfeuti
G3, Ba-san
Abstract Jazz Phunk
Rock the Love Jive
John Torn
Hot Monkey Stick
20
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Passaggio al capitolo o brano
successivo
Evitamento di capitoli o brani in
avanti/all’indietro – DVD/Video CD/CD
Prem ere il pulsante NEXT ¢ (o ¡ ¢ del
pannello anteriore del lettore).
OPEN/
CLOSE
LAST
CONDITION
MEMORY MEMORY
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
REP EAT
A-B
TOP MENU
•
•
Premere il tasto per passare al capitolo o brano successivo.
M ENU
RETURN
DISPL
A
Y
Si può saltare più di un brano mantenendo premuto il
pulsante NEXT ¢ e lasciandolo andare quando il
numero del brano desiderato appare sullo schermo.
5
¶
¶
NEXT
¢
P REV
4
5
¶
¶
PREV 4
NEXT ¢
S TOP
7
P LAY
3
PAUS E
8
Passaggio al capitolo o brano
successivo
¶
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
+1 0
5
4
7
0
8
Prem ere il pulsante PREV 4 (o 4 1 del
pannello anteriore del lettore).
SEARCH MODE
RANDOM PROGRAM
Î
•
•
•
Premere una volta il pulsante per fare ritorno all’inizio
del capitolo o brano attualmente in riproduzione.
Premerlo due volte per fare ritorno al capitolo o brano
ancora precedente.
Potete tornare ai capitoli precedenti (brani)
mantenendo premuto PREV 4 e lasciandolo andare
quando il brano desiderato appare sul display.
DVD PLAYER
S
TANDBY/ ON
0
4 1 ¡ ¢
7
8
3
Î
4 1
¡ ¢
Scansione in avanti
Scansione in avanti
all’indietro
– DVD/Video CD/CD
Mantenere prem uto il pulsante FWD ¡
(o ¡ ¢ del pannello anteriore) durante la
riproduzione.
OPEN/
CLOSE
LAST
CONDITION
MEMORY MEMORY
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
•
•
Lasciare andare FWD ¡ quando si raggiunge la
locazione desiderata. La riproduzione normale
riprende.
REP EAT
A-B
M ENU TOP MENU
RETURN
DISPL
A
Y
5
¶
¶
Se l’indicatore “Scan” dello schermo rimane acceso
dopo aver lampeggiato, la scansione in avanti continua
anche se il pulsante viene lasciato andare. Quando la
locazione desiderata è stata raggiunta, premere il
pulsante PLAY 3.
NEXT
¢
PLAY 3
P REV
4
5
¶
¶
S TOP
7
P LAY
3
PAUS E
8
¶
1REV FW D
¡
eS TEP / S LOW
E
1 REV/ FWD ¡
CLEAR
2
3
6
9
1
+1 0
5
4
7
Scansione all’indietro
0
8
SEARCH MODE
RANDOM PROGRAM
Î
Mantenere prem uto il pulsante REV 1 (o 4
1 del pannello anteriore) durante la
riproduzione.
3
•
•
Lasciare andare REV 1 quando si raggiunge la
locazione desiderata. La riproduzione normale riprende.
DVD PLAYER
S
TANDBY/ ON
0
4 1 ¡ ¢
7
8
3
Se l’indicatore “Scan” dello schermo rimane acceso
dopo aver lampeggiato, la scansione all’indietro
continua anche se il pulsante viene lasciato andare.
Quando la locazione desiderata è stata raggiunta,
premere il pulsante PLAY 3.
Î
4 1
¡ ¢
21
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Ripresa della riproduzione
dadove era stata interrotta
– DVD/Video CD
Abbandono della riproduzione
e spegnimento del lettore
– DVD/Video CD/CD
Usare la caratteristica di ripresa per riprendere la
riproduzione da dove era stata interrotta per l’ultima
volta.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
2
Prem ere STOP 7 una volta.
4
1
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
Il display mostra l’indicazione “RESUME” e la posizione
REP EAT
A-B
M ENU TOP MENU
di arresto della riproduzione viene memorizzata.
RETURN
DISPLAY
5
¶
¶
• La posizione di ripresa rimane in memoria sintanto che
il disco caricato non cambia ed anche se il lettore
viene spento.
NEXT
¢
P REV
4
5
• Premendo il pulsante STOP 7 due volte si fa sì che il
disco torni all’inizio quando il pulsante PLAY 3 viene
premuto di nuovo. Il display mostra il tipo di disco
(DVD o Video CD).
¶
¶
P LAY
3
PAUS E
8
S TOP
7
¶
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
+1 0
5
4
7
Prem ere PLAY 3.
La riproduzione riprende dalla posizione da cui era stata
interrotta.
0
8
PROGRAM SEARCH MODE
RANDOM
Î
Note
4
3
2
•
La posizione di ripresa effettiva può cambiare leggermente
a seconda dei casi.
•
Se si vuole togliere il disco senza cancellare dalla memoria
la posizione di ripresa della riproduzione, usare la
caratteristica di LAST MEMORY (pagina 44).
DVD PLAYER
S
TANDBY/ ON
0
4 1 ¡ ¢
7
8
3
Î
1
1
2
3
Prem ere il pulsante STOP 7 (o 7 del
pannello anteriore).
La riproduzione fermare.
Prem ere il pulsante OPEN/ CLOSE (o 0 del
pannello anteriore).
Il piatto portadisco fuoriesce.
Togliere il disco.
3
8
7
¢
¡
1
4
0
4
Prem ere , o STANDBY/ ON del pannello
anteriore.
Il piatto portadisco si apre.
22
It
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Prem ere il pulsante STANDBY/ ON del
pannello anteriore ( sul telecom ando).
Impostazione
video ed audio
Prem ere il pulsante SETUP.
La schermata Setup compare sullo schermo.
(Esem pio)
Audio1 Audio2 Video Language General
Dolby Digital Out – Dolby Digital
DTS Out – Off
Uso dei menu della schermata
Setup
La procedura descritta in questa pagina descrive l’uso
dei menu contenuti nella schermata Setup. Questi menu
vengono usati per regolare dei parametri di sistema. Le
varie funzioni che possono venire regolate sono descritte
nel corso di tutto questo manuale. La procedura descritta
in questa pagina fornisce una descrizione sommaria
dell’uso della schermata Setup.
96kHz PCM Out – 96kHz 3 48kHz
MPEG Out – MPEG 3 PCM
Setup audio
Digital output format/tone adjust
Move
SETUP Exit
3
4
Usare i pulsanti del cursore (2/ 3) per scegliere
il m enu desiderato.
Dato che ciascun menu viene scelto col cursore, le
impostazioni viste di seguito appaiono al di sotto
dell’intestazione del menu.
Quando si im posta il lettore per la prim a volte
Si raccomanda di impostare il lettore per l’uso con Setup
Navigator (pagina 16). Se si sceglie [Auto Start Off]
quando Setup Navigator appare, si può ancora fare
l’impostazione via Setup Navigator attraverso la
schermata del menu General.
Se si è scelto di non usare Setup Navigator, esser certi di
fare tutte le impostazioni necessarie nei menu Audio 1,
Audio 2, Video e Language della schermata Setup,
descritti alle pagine che seguono.
Prem ere il pulsante del cursore (∞) per far
com parire un m enu.
La prima voce in alto del menu è evidenziata.
(Esem pio)
Audio1 Audio2 Video Language General
Dolby Digital Out Dolby Digital
Dolby Digital 3 PCM
DTS Out -
96kHz PCM Out – 96kHz 3 48kHz
Alcuni DVD iniziano automaticamente la riproduzione
quando vengono caricati nel lettore. Se un DVD è
caricato nel lettore, premere sempre STOP 7 prima di
procedere.
MPEG Out – MPEG 3 PCM
Change Dolby Digital output mode
SETUP
Move
Exit
5
6
Usare i pulsanti del cursore (5/ ∞) per scegliere
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
le im postazioni da cam biare.
1
2
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
Le opzioni disponibili per ciascuna impostazione appaiono
sulla destra quando la rispettiva impostazione viene
scelta. L’impostazione attuale compare accompagnata
dall’indicatore di impostazione.
REP EAT
A-B
M ENU TOP MENU
RETURN
DISPLAY
5
¶
¶
2
3, 4, 5, 6
NEXT
¢
P REV
Prem ere il pulsante del cursore (3) per entrare
nelle opzioni di im postazione.
4
5
¶
¶
P LAY
3
PAUS E
8
S TOP
7
¶
(Esem pio)
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
Audio1 Audio2 Video Language General
Dolby Digital Out Dolby Digital
+1 0
5
4
7
Dolby Digital 3 PCM
DTS Out -
96kHz PCM Out – 96kHz 3 48kHz
0
8
MPEG Out – MPEG 3 PCM
PROGRAM SEARCH MODE
RANDOM
Î
Output Dolby Digital
ENTER
SETUP
Exit
Move
Select
•
Non tutte le opzioni di un disco possono venire
cambiate mentre un disco sta venendo riprodotto. In
questi casi, tali opzioni appaiono in grigio sullo schermo
ad indicare che non sono disponibili. In questi casi,
premere il pulsante STOP 7 e quindi quello SETUP.
Usando i menu dopo aver premuto il pulsante STOP 7
può cancellare la funzione di ripresa della riproduzione.
Alcune impostazioni fatte non hanno immediatamente
corso se al momento un disco sta venendo riprodotto.
Per renderle attive, fermare la riproduzione e quindi
riprendere la regolazione oppure cambiarle mentre il
disco è fermo.
1
DVD PLAYER
S
TANDBY/ ON
0
4 1 ¡ ¢
7
8
3
•
•
Î
continua
23
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Nota
Se una impostazione applicabile solo a dischi DVD viene
cambiata mentre è caricato un disco Video CD o CD, un’icona
DVD blu appare ad indicare che l’impostazione fatta non è
adatta la disco al momento caricato nell’unità. Essa viene
attivata però quando viene inserito un disco DVD.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
REP EAT
ANGLE
AUDIO
S ETUP
SUB TITLE
REP EAT
A-B
M ENU TOP MENU
9
RETURN
DISPLAY
5
¶
¶
7, 8
7
2
IMPORTANTE
7, 8
NEXT
P REV
¢
4
5
¶
¶
P LAY
3
PAUS E
8
S TOP
7
Passaggio al modo “Expert” del
menu della schermata Setup
I menu della schermata Setup sono divisi in due livelli,
quello [Basic] e quello [Expert], così da rendere l’uso
del lettore più facile a utenti di tipo diverso. Il modo
[Basic] del menu contiene funzioni che possono venire
considerate essenziali e informazioni di aiuto identificate
¶
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
+1 0
5
4
7
0
8
PROGRAM SEARCH MODE
RANDOM
Î
i
con l’icona
. Il modo [Expert] aggiunge alcune
funzioni a quelle di [Basic], permettendo un uso più
approfondito del lettore.
In questo manuale, le funzioni contenute solo nel menu
[Expert] sono identificate con l’icona
.
Expert
Fare le modifiche necessarie a [Setup Menu Mode] del
menu General della schermata Setup.
7
Usare i pulsanti del cursore (5/ ∞) per
scegliere una nuova im postazione e quindi
prem ere il pulsante ENTER per
m em orizzare le im postazioni fatte.
Prem ere il pulsante RETURN o quello del
Audio1 Audio2 Video Language General
Setup Menu Mode Expert
Setup Navigator Basic
Parental Lock – Level 8
Change menu mode
cursore
(
2
)
per abbandonare le opzioni
SETUP
Move
Exit
senza fare alcun cam biam ento.
Impostazioni : Expert
Basic*
8
9
Prem ere il pulsante RETURN o quello del
cursore (2) per tornare alla barra del m enu
principale e scegliere un altro m enu.
* Impostazione di fabbrica
Prem ere il pulsante SETUP per far
scom parire la scherm ata Setup.
La schermata Setup si chiude.
Nota
Le informazioni sullo schermo appaiono solo se si sceglie
[English] come lingua [OSD Language] ed il modo del menu
è quello [Basic].
Nota
La prossima volta che il pulsante SETUP viene premuto,
vedrete il menu che avete editato l’ultima volta che avete
usato l’unità.
Com e interpretare i colori dell’indicatore di
im postazione dei m enu della scherm ata Setup
Durante l’impostazione del proprio sistema o quando si
regolano parametri, è conveniente sapere quali
regolazioni valgono per quali formati del segnale.
Quando le impostazioni appaiono per ciascuna voce del
menu, quella attuale appare in uno di tre colori, blu,
verde o giallo. Questi colori corrispondono ai formati
influenzati dal menu nel modo indicato nella tabella che
segue.
Colore dell’indicatore
Blu
Form ati del segnale
Solo DVD
Verde
Giallo
DVD/ Video CD
Tutti i form ati com patibili
24
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Uscita DTS Out
Compatibilità fra uscita digitale
audio e componente AV– DVD
Questo lettore può emettere segnali digitali audio dei
formati Dolby Digital, DTS, MPEG e segnali con
frequenza di campionamento di 96 kHz. Impostare il
menu Audio 1 della schermata Setup in modo da andare
incontro alle capacità del componente AV usato.
Questo lettore è in grado di emettere segnale audio DTS
per DVD registrati in tale formato. Se questo lettore viene
collegato ad un componente AV che incorpora un
decodificatore DTS, scegliere la posizione [DTS]. Se il
vostro sistema non possiede invece un decodificatore DTS,
scegliere [Off]. Per controllare la compatibilità dei vostri
componenti con il formato DTS, consultarne i manuali.
Note
Audio1 Audio2 Video Language General
• Se si è già terminato il lavoro con Setup Navigator, le
impostazioni viste in questa pagina sono già state fatte.
• Se si sono fatti solo collegamenti stereo (analogici) con
cavo audio in dotazione, non è necessario portare alcuna
modifica a questo menu.
Dolby Digital Out –
DTS Out
96kHz PCM Out -
Dolby Digital
Off
DTS
MPEG Out – MPEG 3 PCM
Change DTS output mode
SETUP
Move
Exit
Uscita Dolby Digital
Questo lettore è in grado di emettere segnali audio di
circondamento Dolby Digital. Quando il lettore viene
collegato ad un componente AV che incorpora un
decodificatore Dolby Digital, scegliere [Dolby Digital].
Questo lettore è anche in grado di convertire un segnale
Dolby Digital nel formato digitale Linear PCM, lo stesso
segnale digitale emesso da un CD.
Scegliere [Dolby Digital 3 PCM] se si è collegato il
lettore ad un amplificatore o sintoamplificatore dotato di
decodificatore Dolby Pro Logic o DAC (Digital Analog
Converter).
Impostazioni : Off*
DTS
* Impostazione di fabbrica
Nota
Se si è collegato il lettore a componenti non in grado di
decodificarli, scegliere sempre l’impostazione [Off]. Se un
segnale DTS viene emesso senza venire decodificato, il
rumore digitale che ne risulta può danneggiarvi l’udito ed i
diffusori.
Uscita 96 kHz PCM Out
Audio1 Audio2 Video Language General
Dolby Digital Out Dolby Digital
Dolby Digital 3 PCM
DTS Out -
96kHz PCM Out – 96kHz 3 48kHz
Questo lettore è in grado di emettere segnali digitali con
una frequenza di campionamento pari a 96 kHz. Se si è
collegato questo lettore ad unità in grado di ricevere tale
frequenza, scegliere la posizione [96 kHz] per far sì che il
segnale venga emesso senza modifiche. Alcuni
componenti non sono infatti in grado di farne uso e
scegliendo [96 kHz 3 48 kHz] si riduce la frequenza di
campionamento a 48 kHz.
MPEG Out – MPEG 3 PCM
Change Dolby Digital output mode
SETUP
Move
Exit
Impostazioni : Dolby Digital*
Dolby Digital 3 PCM
*Impostazione di fabbrica
Audio1 Audio2 Video Language General
Dolby Digital Out –
Dolby Digital
DTS Out – Off
96kHz 3 48kHz
96kHz PCM Out
MPEG Out - 96kHz
Change 96 kHz output mode
Move
SETUP
Exit
Impostazioni : 96 kHz 3 48 kHz*
96 kHz
* Impostazione di fabbrica
Nota
Nel caso di DVD che contengono sistemi di protezione dalla
copia, può non esser possibile riprodurre il segnale audio a 96
kHz.
25
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Uscita MPEG Out
Regolazione della gamma
dinamica audio
Audio DRC sta per Audio Dynamic Range Compression
(compressione gamma dinamica audio). Quando questa
caratteristica è attivata, i suoni meno forti, ad esempio i
dialoghi, possono venire uditi più chiaramente senza
rendere quelli più forti ancora più evidenti. Potete
scegliere uno di tre livelli diversi di compressione a
seconda dell’effetto desiderato. Quando Audio DRC si
trova su [Off], non si ha alcun effetto sulla sorgente
audio.
Questo lettore è in grado di emettere segnale audio
MPEG. Se questo lettore viene collegato ad un
– DVD
componente AV che incorpora un decodificatore MPEG,
scegliere la posizione [MPEG]. Se il vostro sistema non
possiede invece un decodificatore MPEG, scegliere
invece [MPEG 3 PCM] per convertire il segnale da
MPEG a PCM, il segnale normalmente emesso dai CD.
Audio1 Audio2 Video Language General
Dolby Digital Out –
Dolby Digital
DTS Out – Off
96kHz PCM Out – 96kHz 3 48kHz
Portare cambiamenti all’impostazione [Audio DRC] nel
menu Audio 2 della schermata Setup.
MPEG Ou
t
MPEG
MPEG 3 PCM
Change MPEG audio output mode
SETUP
Move
Exit
Audio1 Audio2 Video Language General
Audio DRC High
Medium
Low
Off
Impostazioni : MPEG
MPEG 3 PCM*
* Impostazione di fabbrica
Dynamic playback at low volume
SETUP
Move
Exit
Expert
Uscita Digital Out
– DVD/ Video
Impostazioni : High
(compressione massima del segnale
audio)
Medium
(moderata compressione del segnale
audio)
Low
(compressione ridotta del segnale
audio)
Off*
CD/ CD
A seconda delle preferenze e del tipo di collegamenti
fatti, si potrebbe decidere di non usare alcuna uscita
digitale. Se questo parametro viene portato su [Off], le
prese di uscita digitali del sistema non emettono alcun
segnale.
Fare i cambiamenti necessari nel menu Audio 1
dell’impostazione [Digital Out] della schermata Setup
dopo aver impostato il modo [Expert] (pagina 24).
*Impostazione di fabbrica
Nota
Audio1 Audio2 Video Language General
Il sistema Audio DRC funziona solo con sorgenti di segnale
audio Dolby Digital.
Dolby Digital Out –
DTS Out –
Dolby Digital
Off
96kHz PCM Out – 96kHz>48kHz
MPEG Out – MPEG 3 PCM
Digital Out On
Off
SETUP
Move
Exit
Impostazioni : On*
(viene em esso un bitstream digitale)
Off
(non viene em esso un bitstream
digitale)
* Impostazione di fabbrica
26
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Se si usa un televisore o m onitor di tipo Wide
Im postazioni ed aspetto
Impostazione delle dimensioni
del televisore
Il rapporto fra le due dimensioni dello schermo di un
televisore convenzionale è di 4:3, mentre quello di un
televisore Wide o ad alta definizione è di 16:9. Questo
rapporto viene definito le [proporzioni] dello schermo.
Quando si vede un programma registrato con proporzioni
differenti, le proporzioni di riproduzione possono venire
cambiate a piacere a seconda del televisore o monitor
usato.
Cambiare le proporzioni dello schermo con [TV Screen]
del menu Video della schermata Setup. Tenere presente
che le modifiche portate con la schermata [TV Screen]
non possono venire fatte durante la riproduzione. Prima
di portare cambiamenti, fermare il disco.
Im m agine DVD
dell’im m agine
presentata sullo scherm o
– DVD
DVD di form ato Wide
Tenere presente che vi sono
alcuni formati di questo tipo che
fanno comparire barre nere in
cima e sotto l’immagine. Questo
non è un guasto.
Im postazione “Wide”
DVD di form ato standard
Se si vede un DVD di formato
standard su di un televisore
Wide, data la larghezza
insufficiente dell’immagine, sui
suoi due lati possono apparire
due fasce nere.
Im postazione “Wide”
DVD di form ato standard
(im m agine allungata
orizzontalm ente)
Audio1 Audio2 Video Language General
TV Screen 4:3(Letter Box)
Video Out —4:3(Pan&Scan)
16:9(Wide)
Se si vede un DVD di formato
standard su di un televisore Wide,
l’immagine può anche apparire
allungata orizzontalmente. Per
eliminare il problema, cambiare le
proporzioni dell’immagine
portandole allo standard 4:3. Per
maggiori dettagli, consultare il
manuale del proprio televisore o
monitor.
Select your display preference
SETUP
Move
Exit
Im postazione “Wide”
Impostazioni : 4:3 (Letter Box)
4:3 (Pan & Scan)
16:9 (Wide)*
* Impostazione di fabbrica
Se si usa un televisore o m onitor di tipo standard
Im m agine DVD
presentata sullo scherm o
Im postazioni ed aspetto
dell’im m agine
Note
• Se viene scelto [Standard (4:3)] nella schermata di Setup
Navigator, [4:3 (Letter Box)] viene scelto automaticamente
in questa schermata. Se si preferisce il formato Pan&Scan,
cambiare le impostazioni di questa schermata.
• La possibilità di cambiare le proporzioni dello schermo
dipende dal disco usato. Consultare in proposito le
informazioni sulla custodia del disco.
• Alcuni dischi possono non essere compatibili con le
proporzioni dello schermo impostate con [TV Screen]. In
tal caso, viene automaticamente impostato il modo delle
proporzioni standard dello schermo.
DVD di form ato Wide
TLa modalità 4:3 Letter Box presenta
fasce nere sopra e sotto l’immagine
DVD di formato Wide La modalità 4:3
Pan & Scan invece taglia i due lati
dell’immagine quando si riproduce
un’immagine Wide su di un televisore o
monitor di tipo standard (4:3).
Im postazione “Letter Box”
DVD di form ato Wide
Se si possiede un televisore di
proporzioni standard, l’immagine
viene sempre visualizzata con le
proporzioni standard.
Differenze di dim ensioni dello scherm o e
form ati DVD
Il numero di proporzioni dello schermo disponibili può
portare a confusioni. Se regolato in modo scorretto, lo
schermo può distorcere le immagini. I diagrammi che
seguono dovrebbero aiutare l’utente ad impostare lo
schermo stesso in modo corretto.
Le impostazioni disponibili in [TV Screen] sono forse le
più adatte quando il DVD che si sta guardando è del tipo
Wide. Se si possiede un televisore normale, impostare
[4:3 (Letter Box)] o [4:3 (Pan & Scan)] a seconda delle
preferenze. Se si possiede invece un televisore Wide,
scegliere il modo [16:9 (Wide)], appunto.
Im postazione “Pan & Scan”
DVD di form ato standard
Se si possiede un televisore di
proporzioni standard, l’immagine
viene sempre visualizzata con le
proporzioni standard.
Ogni altra posizione
DVD di form ato Wide
(im m agine com pressa
orizzontalm ente)
Se si vede un DVD di formato
Wide su di un televisore normale
e le impostazioni [TV Screen]
sono su [16:9 (Wide)],
l’immagine può apparire
compressa lateralmente. Per
risolvere il problema, scegliere la
modalità [4:3 (Letter Box)] o
[4:3 (Pan & Scan)].
Im postazione “Wide”
27
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Attivazione e disattivazione
delle indicazioni OSD
Se non si desidera visualizzare gli indicatori OSD
(riproduzione, arresto, riprendi, ecc.) sullo schermo, è
possibile disattivarli con l’impostazione [On Screen
Display] nel modo [Expert] del menu Video della
schermata Setup (pagina 24).
Impostazione del formato di
uscita video per il
collegamento AV CONNECTOR
Se i collegamenti vengono fatti con la presa AV
CONNEVCTOR del lettore attraverso un cavo di
peritelevisione (SCART), è possibile scegliere il formato
video compatibile con il proprio televisore o monitor.
Scegliere [Video] per mandare in uscita segnale video
composito, [S-Video] per mandare segnale S-Video ed
[RGB] per mandare segnale RGB. Per informazioni su
quale dei tre formati è più adatto al vostro televisore,
consultare il manuale del vostro televisore o monitor.
Portare cambiamenti all’impostazione [Video Out] della
schermata Setup del menu Video.
Expert
Audio1 Audio2 Video Language General
TV Screen – 16:9(Wide)
Video
Video Out –
Still Picture – Field
On Screen Display
On
OSD Position —
Off
Angle Indicator – On
SETUP
Move
Exit
Audio1 Audio2 Video Language General
Impostazioni : On*
TV Screen – 16:9(Wide)
Video Out
Video
S-Video
RGB
Off
* Impostazione di fabbrica
Set AV CONNECTOR video format
SETUP
Move
Exit
Impostazione della posizione
Expert
delle indicazioni OSD
Impostazioni : Video*
Quando si guardano programmi convenzionali su di un
televisore Wide, il display di controllo si trova sullo
schermo in alto e può essere difficile da vedere.
Cambiano la posizione del display si possono vedere gli
indicatori di funzionamento chiaramente anche su di uno
schermo Wide.
S-Video
RGB
* Impostazione di fabbrica
Scelta del tipo di immagine
ferma da visualizzare
Questa funzione permette di vedere un’immagine ferma
chiara a DVD in pausa.
Le modifiche necessarie devono venire fatte nel modo
[Expert] del menu Video della schermata Setup (pagina
pagina 24).
Expert
Audio1 Audio2 Video Language General
Fare i cambiamenti necessari nel livello [Expert]
dell’impostazione [Still Picture] del menu Video della
schermata Setup (pagina 24).
TV Screen – 16:9(Wide)
Video
Video Out –
Still Picture – Field
On Screen Display – On
OSD Position
Wide
Normal
Angle Indicator-
SETUP
Move
Exit
Audio1 Audio2 Video Language General
TV Screen – 16:9(Wide)
Video Out –
Video
Still Picture Field
On Screen Display
–
Impostazioni : Wide
Norm al*
Frame
OSD Position –
Auto
Angle Indicator – On
* Impostazione di fabbrica
SETUP
Move
Exit
Impostazioni : Field
(Elimina eventuali vibrazioni durante la
riproduzione di immagine ferma.)
Fram e
(Permette una riproduzione di qualità
superiore.)
Auto*
(Sceglie automaticamente il modo
[Field] o [Fram e] a seconda del caso.)
* Impostazione di fabbrica
28
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Attivazione e disattivazione
dell’indicazione di angolazioni
m ultiple
Visione da un’angolazione
desiderata (funzione
Expert
angolazioni multiple)
– DVD
Quando le locazioni su dischi che possiedono varie
angolazioni vengono riprodotte, viene visualizzato
Se il DVD riprodotto possiede le informazioni necessarie,
è possibile vedere la stessa scena da varie angolazioni.
l’indicatore
. Questa impostazione vi permette di
comprendere immediatamente se sono a disposizione
angolazioni alternative o meno.
OPEN/
Attivare e disattivare l’indicazione di angolazioni multiple
con l’impostazione nel livello [Expert] dell’impostazione
[Angle Indicator] del menu Video della schermata
Setup (pagina 24).
CONDITION CLOSE
MEMORY
LAST
MEMORY
ANGLE
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
REP EAT
A-B
M ENU TOP MENU
RETURN
DISPLAY
5
¶
¶
Audio1 Audio2 Video Language General
TV Screen – 16:9(Wide)
Video
Video Out –
Still Picture – Field
On Screen Display – On
OSD Position – Normal
Angle Indicator
On
Off
Prem ere il pulsante ANGLE durante la
riproduzione.
SETUP
Move
Exit
L’angolazione della videocamera cambia ogni volta che si
preme il tasto.
Impostazioni : On*
(viene visualizzata l’indicazione
Off
)
ANGLE
: 1/4
ANGLE
: 2/4
(nessuna indicazione)
* Impostazione di fabbrica
\
|
Nota
»
«
Anche se l’impostazione [Angle Indicator] si trova su [Off],
l’indicatore del display del lettore si illumina durante la
riproduzione di una scena ad angolazioni multiple. È quindi
possibile sapere quando esistono altre angolazioni anche
senza far comparire icone sullo schermo.
ANGLE
: 3/4
ANGLE
: 4/4
Note
• La funzione di angolazioni multiple può chiaramente venire
utilizzata solo se il disco DVD possiede le informazioni
necessarie.
• Durante la riproduzione ad angolazioni multiple, l’indicatore
del display si accende.
• Nel caso di alcuni dischi, la selezione può venire fatta
usando il menu offerto dal DVD stesso. In tal caso,
premere il pulsante MENU per visualizzare il menu del
disco DVD e quindi scegliere la voce desiderata.
Per controllare se un disco possiede le inform azioni
necessarie per la funzione di angolazioni m ultiple:
Le custodie di dischi che possiedono angolazioni differenti di una
stessa scena riportano l’icona
che possiedono varie angolazioni vengono riprodotte, viene
visualizzato l’indicatore
. Quando le locazioni su dischi
.
Per cancellare tale indicazione, impostare [Angle Indicator] su
[Off] nel menu Video della schermata Setup nel modo descritto
di seguito.
29
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Impostazione
delle opzioni di
lingua
Impostazione delle preferenze
per lingua e sottotitoli nei
menu della schermata Setup
Il menu Language della schermata Setup contiene una
quantità di impostazioni legate alla lingua dell’audio e dei
sottotitoli.
Tenere presente che i cambiamenti nelle impostazioni
della lingua Language in questa sezione non possono
venire fatti durante la riproduzione di un disco. Fermare
la riproduzione e solo allora portare cambiamenti.
I DVD possono contenere grandi quantità di informazioni
audio, e questo rende loro possibile contenere dialoghi in
fino a 8 lingue e sottotitoli in fino a 32 lingue. Questa
sezione descrive le opzioni disponibili per dialoghi e
sottotitoli con questo lettore.
Scelta di una lingua audio nelle
preferenze
La lingua audio che preferite ascoltare normalmente può
venire scelta automaticamente attraverso le preferenze.
Anche quando la lingua audio viene cambiata durante la
riproduzione premendo il pulsante AUDIO, la lingua
scelta con questa regolazione rimane come default
anche quando si cambia DVD.
Tenere presente che se si sono già completate le
operazioni di impostazione con Setup Navigator, le
impostazioni audio e dei sottotitoli sono già state fatte
automaticamente dal lettore in accordo con la lingua
scelta per le indicazioni sullo schermo OSD (la lingua che
appare nei messaggi sullo schermo).
Note
• I DVD differiscono in contenuto e non sempre possiedono
molte lingue e sottotitoli. Le impostazioni effettuate in
questa sezione possono quindi non avere alcun effetto sulla
riproduzione di un DVD particolare.
Portare cambiamenti nella finestra [Audio Language]
del menu Language della schermata Setup.
• Se si sono già completate le operazioni di
impostazione con Setup Navigator, le impostazioni di
questa pagina sono già state fatte dal lettore.
Audio1 Audio2 Video Language General
English
OSD Language -
Audio Language - French
German
Subtitle Language -
Italian
Auto Language -
Spanish
Other
Impostazione della lingua
OSD
Questa regolazione viene usata per scegliere la lingua di
visualizzazione dei messaggi sullo schermo e dei menu.
Cambiare questa regolazione in [OSD Language] del
menu Language della schermata Setup.
Setup audio language
SETUP
Move
Exit
Impostazioni : English*
French
Germ an
Italian
Spanish
Other
Audio1 Audio2 Video Language General
OSD Language English
(Per dettagli sulla selezione di altre
lingue, vedi ‘Se si sceglie “Other”
(altra lingua)’, alla pagina 33.)
Audio Language -
français
Subtitle Language -
Deutsch
Auto Language -
Italiano
Español
Select the On Screen Language
SETUP
Move
Exit
* Impostazione di fabbrica
Impostazioni : English*
français
Deutsch
Italiano
Español
* Impostazione di fabbrica
Note
•
La lingua che può venire scelta può essere differente da
quelle visualizzate.
•
L’impostazione [OSD Language] viene portata in fabbrica
sulla posizione [English]. Se si desidera fare uso delle
indicazioni in inglese, non intervenire.
30
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Cam bio del tipo di audio – Video CD/CD
Cambio della lingua audio
Per la riproduzione di dischi karaoke o Video CD e CD di
simile formato, si può scegliere la riproduzione audio
stereo o quella di riproduzione mono del solo canale
destro e sinistro a seconda delle necessità.
(funzione multi lingue)
– DVD
Il DVD può contenere segnale audio Dolby Digital, PCM
e di altro tipo in varie lingue, permettendovi di scegliere
quella voluta.
Per cam biare il tipo di audio, prem ere il
pulsante AUDIO più volte durante la
riproduzione.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
REP EAT
ANGLE
AUDIO
S ETUP
SUB TITLE
AUDIO
L’uscita audio cambia da [1/ L] per il canale sinistro a
REP EAT
A-B
M ENU TOP MENU
[2/ R] per il canale destro a [Stereo].
RETURN
DISPLAY
5
¶
¶
Audio
: 1/L
NEXT
P REV
¢
4
5
¶
¶
P LAY
3
PAUS E
8
S TOP
7
¶
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
+1 0
5
4
7
0
8
PROGRAM SEARCH MODE
RANDOM
Î
Audio
: 2/R
Prem ere il pulsante AUDIO più volte per
scegliere la lingua desiderata.
Audio
: Stereo
Premendo il pulsante AUDIO una volta si visualizza la
lingua attualmente scelta. Le pressioni seguenti
permettono di passare dall’una all’altra delle lingue a
disposizione sul DVD.
Dolby Digital
5.1CH
Dolby Digital
5.1CH
: 2 Spanish
Audio
: 1 English
Audio
Nota
Con dischi Karaoke o di altro tipo, scegliere la modalità
appropriata dopo aver consultato la custodia del disco e la
documentazione ad esso allegata.
Note
•
•
•
Tenere presente che la lingua audio non può venire
cambiata se nel disco ne è registrata una sola.
Alcuni dischi possono non permettere il cambiamento della
lingua audio. In tal caso, viene visualizzata l’indicazione
Per alcuni dischi, la selezione della lingua audio può venire
fatta con i menu del disco DVD stesso. In questo caso,
premere il pulsante MENU per visualizzare la schermata
del menu DVD e quindi scegliere la lingua desiderata.
.
31
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Scelta di una lingua dei sottotitoli
nelle preferenze
La lingua dei sottotitoli che preferite ascoltare
normalmente può venire scelta automaticamente
attraverso le preferenze. Anche quando la lingua dei
sottotitoli viene cambiata durante la riproduzione
premendo il pulsante SUBTITLE, la lingua scelta con
questa regolazione rimane come default anche quando si
cambia DVD.
Scelta di una lingua per i
sottotitoli (sottotitoli in più
lingue)
– DVD
Si può scegliere una lingua particolare per i sottotitoli con
Portare cambiamenti nella finestra [Subtitle Language]
del menu Language della schermata Setup.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
SUBTITLE
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
REP EAT
A-B
M ENU TOP MENU
Audio1 Audio2 Video Language General
RETURN
DISPLA
Y
English
OSD Language -
5
¶
¶
French
Audio Language -
Subtitle Language German
Auto Language - Italian
Spanish
2
NEXT
¢
P REV
4
Other
5
¶
¶
Setup disc's subtitle language
P LAY
3
PAUS E
8
SETUP
Exit
S TOP
7
Move
¶
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
Impostazioni : English*
French
+1 0
5
4
7
0
8
Germ an
Italian
PROGRAM SEARCH MODE
RANDOM
Î
Spanish
Other
(Per dettagli sulla selezione di altre
lingue, vedi ‘Se si sceglie “Other”
(altra lingua)’, alla pagina 33.
* Impostazione di fabbrica
Prem ere il pulsante SUBTITLE più volte
durante la riproduzione.
Premendo il pulsante SUBTITLE una volta si visualizza la
lingua attualmente scelta per i sottotitoli. Le pressioni
seguenti permettono di passare da una all’altra delle
lingue disponibili.
Subtitle :1 English
Subtitle :2 Spanish
HELLO!
HOLA!
Note
•
Tenere presente che la lingua dei sottotitoli non può venire
cambiata se nel disco ne è registrata una sola.
•
Alcuni dischi possono non permettere il cambiamento della
lingua dei sottotitoli. In tal caso, viene visualizzata
l’indicazione
.
•
•
Per cancellare i sottotitoli durante la riproduzione, premere
il pulsante SUBTITLE e quindi quello CLEAR, oppure il
pulsante SUBTITLE sino a fare apparire l’indicazione [Off].
Per alcuni dischi, la selezione della lingua dei sottotitoli può
venire fatta con i menu del disco DVD stesso. In questo
caso, premere il pulsante MENU per visualizzare la
schermata del menu DVD e quindi scegliere la lingua
desiderata.
32
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Se si sceglie “Other” (altra lingua)
Se si sceglie [Code], usare i pulsanti del
cursore (5/ ∞) per digitare le cifre della
lingua.
Usare i pulsanti del cursore (2/3) per cambiare la
posizione del cursore. Si può anche impostare il
codice della lingua con i pulsanti num erici.
Se si desidera scegliere una delle 136 lingue possibili
come lingua audio principale, seguire le fasi descritte di
seguito quando appare la schermata seguente.
Una lista dei codici di lingua appare a pag. 50.
Code (0~2)
Audio1 Audio2 Video Language General
OSD Language -
English
Audio Language
French
Subtitle Language - German
Auto Language -
Italian
1
0
0
1
Spanish
Other
Setup audio language
SETUP
Exit
Move
ENTER Select
4
Prem ere il pulsante ENTER per im postare
la nuova lingua.
REP EAT
ANGLE
AUDIO
S ETUP
SUB TITLE
Per abbandonare la schermata senza portare alcuna
REP EAT
A-B
M ENU TOP MENU
modifica, premere il pulsante RETURN.
RETURN
DISPLAY
5
¶
¶
2
1, 2, 3
1, 4
NEXT
P REV
Im postazione di Auto Language
per controllare la lingua dei
¢
4
5
¶
¶
P LAY
3
PAUS E
8
S TOP
7
¶
1REV FW D
¡
sottotitoli e dell’audio sulla base
del contenuto di un program m a
eS TEP / S LOW
E
C
EAR
2
3
1
Se la funzione Auto Language è attivata, i film stranieri
vengono automaticamente riprodotti nella lingua
originale e con sottotitoli in una lingua scelta dall’utente
con l’opzione [Subtitle Language]. I film italiani
vengono invece mostrati con l’audio originale e senza
sottotitoli. (Questa impostazione può non funzionare con
tutti i DVD.)
1
Usare i pulsanti del cursore per scegliere
[Other] (altra lingua) e quindi prem ere il
pulsante ENTER.
La schermata di scelta della lingua appare sullo
schermo.
Fare cambiamenti ad [Auto Language] nel menu
Language della schermata Setup.
Audio1 Audio2 Video Language General
Audio Language
Code (0~2)
List of Languages
Audio1 Audio2 Video Language General
ja: Japanese
OSD Language – English
Audio Language – English
Subtitle Language – Spanish
1
0
0
1
Setup audio language
Move
+/ –
RETURN Return
SETUP
Auto Language O
On
ENTER
Select
Exit
Off
Play dialog, etc. in original language
Subtitle ON with foreign audio.
SETUP
Move
Exit
2
3
Usare i pulsanti del cursore (2/ 3) per
Impostazioni : On*
scegliere o [List of Languages] o [Code].
Off
* Impostazione di fabbrica
Se si sceglie [List of Languages], usare i
pulsanti del cursore (5/ ∞) per scegliere la
lingua.
Nota
La caratteristica Auto Language funziona solo quando viene
portata su [On] e la lingua scelta con [Audio Language] e
[Subtitle Language] è uguale.
Per lingue che sono mostrate solo sotto forma di
codici, consultare la lista ‘Lista codici di lingua’ a
pagina 50.
List of Languages
ja: Japanese
33
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Scelta di una lingua per i m enu dei
DVD
Selezione di sottotitoli, sottotitoli di
assistenza e nessun sottotitolo
Expert
Expert
Oltre a contenere varie lingue per l’audio ed i sottotitoli,
un DVD può contenere differenti lingue per i menu.
Impostando una certa lingua come default, essa viene
usata ogni volta che essa viene incontrata in un DVD.
Scegliendo [w / Subtitle Language] si assegna
automaticamente la lingua scelta per i sottotitoli con
[Subtitle Language].
Fare i cambiamenti nell’impostazione [DVD Language]
nel modo [Expert] del menu Language della schermata
Setup (pagina 24).
Usare questa funzione per attivare e disattivare i
sottotitoli. Alcuni DVD inoltre danno sottotitoli addizionali
di assistenza agli utenti duri d’orecchio. Scegliere [Assist
Subtitle] per visualizzare questi sottotitoli con DVD che
possiedono questa funzione.
Fare i cambiamenti necessari nel modo [Expert] di
[Subtitle Display] del menu Language della schermata
Setup (pagina 24).
Audio1 Audio2 Video Language General
OSD Language – English
Audio Language – English
Subtitle Language – Spanish
Auto Language – On
DVD Language -
On
Subtitle Display Off
Audio1 Audio2 Video Language General
OSD Language –
w/ Subtitle Language
Audio Language –
English
Subtitle Language -
French
Assist Subtitle
Auto Language -
Subtitle Off - Selected Subtitle
German
SETUP
Move
Exit
DVD Language Italian
Subtitle Display -
Spanish
Other
Subtitle Off -
SETUP
Move
Exit
Impostazioni : On*
Off
Impostazioni : w / Subtitle Language*
Assist Subtitle
English
French
Germ an
Italian
Spanish
Other
* Impostazione di fabbrica
Note
•
Se un DVD non contiene informazioni su sottotitoli, essi
non vengono visualizzati anche se la funzione è attivata
[On].
• Quest’impostazione funge da impostazione predefinita per
la visualizzazione dei sottotitoli. Anche se l’opzione vien
portata su [Off], i sottotitoli vengono visualizzati premendo
SUBTITLE. Analogamente, se quest’opzione è su [On],
essi possono venire cancellati premendo SUBTITLE e
quindi CLEAR.
(Per dettagli sulla selezione di altre
lingue, vedi ‘Se si sceglie “Other”
(altra lingua)’, alla pagina 33.)
* Impostazione di fabbrica
Note
•
Le impostazioni per il menu possono essere differenti da
quelle viste qui sopra.
Se quest’operazione non funziona, la lingua può venire
scelta anche col menu DVD. Premere MENU per fare
aprire il menu DVD e fare la scelta desiderata.
Scelta della lingua dei sottotitoli
forzati
Anche quando la funzione dei sottotitoli è disattivata,
alcuni DVD producono sottotitoli ugualmente. Questa
impostazione vi permette di scegliere in che lingua essi
appaiono.
Expert
•
Scegliere [With Audio] per far comparire i sottotitoli
nella stessa lingua impostata in [Audio Language].
Scegliere [Selected Subtitle] per visualizzare sottotitoli
nella stessa lingua impostata in [Subtitle Language].
Modificare l’impostazione [Subtitle Off] del menu
Language nel modo [Expert] della schermata Setup
(pagina 24).
Audio1 Audio2 Video Language General
OSD Language – English
Audio Language – English
Subtitle Language – Spanish
Auto Language – On
DVD Language – English
With Audio
Subtitle Display -
Subtitle Off Selected Subtitle
SETUP
Move
Exit
Impostazioni : With Audio
Selected Subtitle*
* Impostazione di fabbrica
34
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Im postazione della parola d’ordine
Se si sceglie o [Level Change] o [Passw ord Change], è
necessario impostare una parola d’ordine di quattro cifre.
Se vi viene chiesto di impostare o confermare una parola
d’ordine, fare quanto segue.
Funzioni
Avanzate
1
Usare i pulsanti del cursore (5/ ∞) o quelli
num erici per scegliere un num ero fra 0 e 9.
Potete anche usare i pulsanti num erici per
impostare direttamente i numeri. Quando si
imposta la parola d’ordine per la prima volta o la si
cambia, vi viene chiesto di introdurla. Se si usano i
pulsanti num erici per impostarla, i numeri stessi
appaiono come asterischi ed il cursore avanza di
volta in volta di una posizione.
Questo lettore è compatibile con dischi DVD, Video CD e
CD. Gli utenti che conoscono già i Video CD o CD
conoscono già molte delle funzioni di questo lettore. Nel
caso dei DVD, però, sono a disposizione molte funzioni
nuove ed utili.
Nota
I DVD differiscono per contenuto e non contengono quindi
sempre le stesse informazioni. Alcune delle funzioni viste in
questa sezione del manuale possono non essere disponibili
nel caso di alcuni DVD.
Audio1 Audio2 Video Language General
Parental Lock: Register Code Number
Enter 4—Digit Code
Move
Impostazione del blocco della
+/ –
RETURN
SETUP
Return
Exit
visione
– DVD
Questo lettore vi permette di impedire la visione di un
DVD se questo dispone del software necessario. Tale
blocco vi permette di impedire ai vostri figli di vedere
materiali che desiderate riservare per voi. Per vedere se
un disco contiene o meno il software necessario per il
blocco della visione, controllare la custodia del disco.
2
Usare i pulsanti del cursore (2/ 3) per
portare il cursore in una posizione
differente della parola d’ordine.
Introdotte tutte e quattro le cifre della parola
d’ordine, appare sullo schermo l’indicazione ENTER.
Portare le modifiche desiderate nella regolazione
[Parental Lock] del menu General della schermata
Setup. Tenere presente che i cambiamenti di questo
parametro non possono venire fatti durante la
riproduzione. Prima di modificarli, fermare il disco.
Audio1 Audio2 Video Language General
Parental Lock: Register Code Number
ENTER
1
0
1
9
Enter 4—Digit Code
Move
+/ –
RETURN
SETUP
Exit
Return
Audio1 Audio2 Video Language General
Setup Menu Mode – Basic
Setup Navigator
Parental Lock Level Change
Password Change
3
Prem ere il pulsante ENTER per finalizzare
l’im postazione della parola d’ordine.
Essa viene memorizzata.
Setup viewing restrictions
SETUP
Move
Exit
Impostazioni: Level Change
Nota
(per maggiori informazioni, consultare
la sezione ‘Im postare un livello di
blocco della visione’ alla pagina
seguente.)
Fare attenzione a non dimenticare la parola d’ordine. Se la
doveste dimenticare, resettare il sistema e quindi impostarne
un’altra. Per resettare il sistema, consultare a pagina 47 la
sezione ‘Resettaggio del sistem a’. Tenere presente che tale
operazioni cancella tutte le impostazioni fatte dall’utente, e
non solo la parola d’ordine.
Passw ord Change
(per maggiori informazioni, consultare
la sezione ‘Cam bio della parola
d’ordine’ alla pagina seguente.)
Se si carica un DVD la cui visione è bloccata
La riproduzione non può iniziare a meno che non si introduca la
parola d’ordine corretta con i pulsanti del cursore (2/3/5/∞) od
i pulsanti num erici, premendo quindi ENTER.
35
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Im postare un livello di blocco della visione
Cam bio della parola d’ordine
Cambiare il livello di blocco della visione a seconda di
quanto scritto sulla custodia del DVD stesso o sulla sua
documentazione. Se si usa la funzione di Condition
Memory per salvare le impostazioni fatte per un disco,
viene salvato anche il livello di blocco della visione
impostato. Essendo memorizzato, esso può venire
cambiato automaticamente a seconda del disco.
la parola d’ordine può venire cambiata ogniqualvolta ciò
sembra necessario. Tuttavia, se la si dimentica, non si
può raggiungere questa schermata per cambiarla.
Audio1 Audio2 Video Language General
Setup Menu Mode
Setup Navigator
–
Basic
Parental Lock Level Change
Password Change
Audio1 Audio2 Video Language General
Setup viewing restrictions
Parental Lock: Level Change
ENTER
SETUP
Exit
Move
Select
1
Level
2
3
4
5
6
7
8
Set Parental Lock
RETURN
SETUP
Return
Exit
Move
ENTER
Select
1
Scegliere [Passw ord Change]
dell’im postazione [Parental Lock].
La schermata cambia in quella di cambio della
parola d’ordine. Per quanto riguarda la procedura di
introduzione, consultare la sezione ‘Im postazione
della parola d’ordine’ alla pagina seguente.
1
Scegliere [Level Change] della regolazione
[Parental Lock] e prem ere ENTER.
Se non avete ancora scelto una parola d’ordine, non
potete scegliere questa impostazione. Prima dovete
fissare una parola d’ordine con [Level Change].
La schermata cambia dando il posto a quella di
impostazione della parola d’ordine. Se la parola
d’ordine non è ancora stata impostata, vi viene
chiesto di farlo. Per impostare la parola d’ordine,
consultare la sezione ‘Im postazione della parola
d’ordine’ alla pagina precedente.
2
3
Usare i pulsanti del cursore (2/ 3/ 5/ ∞) o i
pulsanti num erici per im postare la nuova
parola d’ordine.
2
3
Usare i pulsanti del cursore (2/ 3) per
scegliere un livello di blocco della visione.
Le icone di blocco della visione appaiono “aperte”
sino al livello scelto ad indicare che l’accesso è
possibile.
Quando la nuova parola d’ordine è stata
im postata, prem ere ENTER.
La nuova parola d’ordine viene impostare e la
schermata del menu General fa ritorno. Per tornare
al menu General senza fare cambiamenti, premere
RETURN.
Prem ere il pulsante ENTER per im postare il
nuovo livello.
Il nuovo livello di blocco viene così impostato e la
schermata torna a visualizzare il menu General. Per
tornare alla schermata General senza portare alcun
cambiamento, premere il pulsante RETURN.
Cambio del colore dello
sfondo del monitor
Si può scegliere fra blu e nero il colore di sfondo del
monitor a lettore fermo.
Expert
I cambiamenti vanno fatti in [Background Color] del
menu General nel modo [Expert] della schermata Setup
(pagina 24).
Audio1 Audio2 Video Language General
Setup Menu Mode
Setup Navigator
–
Expert
Parental Lock – Level 8
Background Color
Black
Blue
SETUP
Move
Exit
Impostazioni : Black
Blue*
*Impostazione di fabbrica
36
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Riproduzione di im m agine ferm a
Riproduzione di immagine
ferma/al rallentatore/per
Prem ere il pulsante PAUSE 8.
Nel riprodurre un DVD, se l’immagine nel modo di pausa
oscilla, scegliere l’impostazione [Field] del menu Video
di Setup, sezione [Still Picture] nel modo descritto a
pag. 28.
fotogrammi
– DVD/Video CD
Le immagini video di DVD e Video CD possono venire
riprodotte come immagini ferme, al rallentatore o per
fotogrammi.
Per fare ritorno alla riproduzione norm ale
Durante la riproduzione di immagine ferma, premendo il
pulsante PAUSE 8 o PLAY 3 si riporta la riproduzione
alla normalità.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
REP EAT
ANGLE
AUDIO
S ETUP
SUB TITLE
REP EAT
A-B
M ENU TOP MENU
RETURN
Riproduzione al rallentatore
DISPLA
Y
5
¶
¶
PLAY 3
Mantenere prem uto STEP/ SLOW E durante
NEXT
P REV
¢
4
5
¶
¶
la riproduzione.
P LAY
3
PAUS E
8
S TOP
7
•
La riproduzione al rallentatore viene attivata.
Durante la riproduzione al rallentatore, la velocità di
riproduzione può venire regolata da 1/2 a 1/16 della
velocità di riproduzione normale in quattro fasi usando
i pulsanti STEP/ SLOW e e E.
¶
PAUSE 8
•
1REV FW D
¡
eS TEP / S LOW
E
STEP/ SLOW
e/ E
CLEAR
2
3
6
9
1
+1 0
5
4
7
0
8
PROGRAM SEARCH MODE
RANDOM
1/ 16 – 1/ 8 – 1/ 4 – 1/ 2
Î
Mantenere prem uto il pulsante STEP/ SLOW
e durante la riproduzione di dischi DVD.
•
La riproduzione al rallentatore nella direzione inversa è
possibile.
•
Durante la riproduzione al rallentatore in direzione
inversa, la velocità di riproduzione non può venire
regolata.
Per tornare alla riproduzione norm ale
Quando si riproducono immagini ferme o al rallentatore,
premendo il pulsante PLAY 3 si fa riprendere la
riproduzione normale.
Riproduzione per fotogram m i:
Riproduzione di un fotogram m a
alla volta
1
2
Prem ere il pulsante PAUSE 8.
Prem ere il pulsante STEP/ SLOW e o E.
STEP/ SLOW E: l’immagine avanza di un fotogramma
ogni volta che il pulsante viene
premuto.
STEP/ SLOW e : l’immagine indietreggia di un
fotogramma ogni volta che il
pulsante viene premuto.
Per tornare alla riproduzione norm ale
Quando si un fotogramma alla volta, premendo il
pulsante PLAY 3 si fa riprendere la riproduzione
normale.
Note
•
Durante la riproduzione di immagine ferma, al rallentatore o
per fotogrammi il segnale audio non viene riprodotto.
Certi titoli possono non permettere la riproduzione di
immagine ferma, al rallentatore o per fotogrammi. In tal
•
caso, viene visualizzato il marchio
.
37
It
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Prem ere SEARCH MODE più volte per
scegliere il tipo di ricerca da fare.
Il tipo di ricerca cambia con ciascuna pressione del
pulsante nella sequenza seguente.
Ricerca di titoli, capitoli,
brani o locazioni su di un
disco
– DVD/Video CD/CD
3 Title
Off
3 Chapter/ Track
Questo lettore vi offre differenti modo di aver accesso
alle informazioni contenute da un DVD, Video CD o CD.
Usando il modo di ricerca SEARCH MODE, si possono
cercare titoli o capitoli su un DVD, brani su di un Video
CD o CD o persino scegliere un punto qualsiasi per
iniziare la riproduzione.
2
2
Tim e
Prem ere i pulsanti num erici per scegliere il
titolo, capitolo o brano desiderato dal
quale iniziare la riproduzione.
•
•
•
Per scegliere il titolo No. 3, premere 3.
Per scegliere il titolo No. 10, premere 1 e 0.
Per scegliere il titolo No. 87, premere 8 e 7.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
Per la ricerca a tem po:
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
REP EAT
A-B
•
Per impostare un tempo di 21 minuti, 43 secondi,
M ENU TOP MENU
premere 2, 1, 4 e 3.
Per scegliere 1 ora, 14 minuti, premere 7, 4, 0 e
RETURN
DISPLA
Y
5
¶
¶
•
0.
2
NEXT
P REV
¢
4
5
¶
¶
3
Prem ere il tasto PLAY 3.
La riproduzione del titolo, capitolo o brano scelto ha
inizio. Quando viene effettuata la ricerca a tempo, la
riproduzione inizia nel momento preimpostato.
3
P LAY
3
PAUS E
8
S TOP
7
¶
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
+1 0
5
4
7
+10
2
0
8
PROGRAM SEARCH MODE
RANDOM
Note
•
Î
1
Alcuni dischi permettono di fare la selezione con un menu
contenuto dal DVD stesso. In tal caso, premere TOP
MENU per visualizzare tale menu e fare quindi la propria
scelta.
•
Con alcuni DVD la funzione di ricerca può non essere
possibile e fermarsi immediatamente. In tal caso, viene
visualizzato il marchio
.
•
•
La ricerca a tempo non è possibile con i CD.
Durante la ricerca a tempo con DVD, la riproduzione può
iniziare da un punto leggermente differente da quello
indicato.
•
•
La ricerca a tempo non è possibile a disco fermo.
La ricerca a tempo non è possibile durante la riproduzione
PBC di Video CD.
Per eseguire la ricerca diretta di titoli, capitoli o
brani con i pulsanti num erici:
Premere i pulsanti num erici necessari a disco fermo
per scegliere il numero di un titolo.
Premere i pulsanti num erici a disco in riproduzione per
scegliere un capitolo o brano.
•
•
•
Per scegliere il numero 3, premere 3.
Per scegliere il numero 10, premere +10 e 0.
Per scegliere il numero 37, premere +10, +10,
+10 e 7.
Nota
La ricerca diretta non è possibile per titoli, capitoli o brani di
numero superiore al 20. Per poterla fare, seguire le procedure
del modo SEARCH MODE descritte in questa pagina.
38
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Riproduzione ripetuta di una
sezione specificata di un disco
Riproduzione ripetuta
– DVD/Video CD/CD
Prem ere il pulsante REPEAT A–B all’inizio ed
alla fine della sezione di disco da riprodurre
ripetutam ente.
Si può ripetere la riproduzione di un intero titolo, capitolo
o brano, o anche di una parte di un disco.
•
Se il pulsante REPEAT A–B viene premuto una
seconda volta, il disco torna alla posizione dove
REPEAT A–B era stato premuto per la prima volta e la
riproduzione ripetuta ha inizio di lì.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
REP EAT
ANGLE
AUDIO
S ETUP
SUB TITLE
REPEAT
REP EAT
A-B
M ENU TOP MENU
REPEAT
A-B
•
La ripetizione A-B può venire fatta solo all’interno di
uno stesso titolo, capitolo o brano.
RETURN
DISPLA
Y
5
¶
¶
2
NEXT
P REV
¢
4
5
¶
¶
P LAY
3
PAUS E
8
Per cancellare la riproduzione ripetuta A–B
Premere il pulsante CLEAR. La riproduzione continua,
S TOP
7
¶
PLAY 3
1REV FW D
¡
eS TEP / S LOW
E
ma la funzione di ripetizione viene cancellata.
CLEAR
2
3
6
9
1
CLEAR
+1 0
5
4
7
0
8
Ritorno ad una posizione
specificata
PROGRAM SEARCH MODE
RANDOM
Î
1
2
Prem ere il pulsante REPEAT A–B nella
posizione desiderata.
Quando si vuole tornare alla posizione
indicata, prem ere il pulsante PLAY 3.
Riproduzione ripetuta di un
capitolo o brano
Per cancellare la posizione di riproduzione
indicata
Premere il pulsante CLEAR o cancellare la locazione
specificata per l’inizio della ripetizione REPEAT A–B
stessa.
Prem ere il pulsante REPEAT una volta durante
la riproduzione del capitolo o brano
desiderato.
Note
Ripetizione ripetuta di un titolo
•
Con certi dischi DVD non è possibile ottenere la ripetizione
della riproduzione. In tali casi, l’indicazione
display.
appare sul
Prem ere il pulsante REPEAT due volte durante
la riproduzione del titolo da ripetere.
•
Con dischi Video CD, la riproduzione ripetuta non è
possibile quando il menu viene visualizzato (riproduzione
PBC). Per eseguire la riproduzione ripetuta, iniziare la
riproduzione stessa senza visualizzata un menu premendo
il numero di brano da ripetere a disco fermo e quindi
premendo il pulsante REPEAT.
Se si cambia angolazione della telecamera durante la
ripetizione della riproduzione, la riproduzione ripetuta viene
cancellata.
•
Nel caso di dischi DVD, il titolo continua a venire
riprodotto e quindi la riproduzione riprende dall’inizio
del titolo stesso.
•
•
Nel caso di Video CD e CD, un disco viene considerato
come un solo titolo e quindi viene ripetuto
interamente.
Ripetizione di un intero program m a
Premere il pulsante REPEAT una volta durante la
riproduzione programmata per ripetere la riproduzione
programmata.
Per cancellare la riproduzione program m ata
Premere il pulsante CLEAR. La riproduzione continua,
ma la funzione di ripetizione viene cancellata.
39
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Riproduzione casuale di capitoli
all’interno di un titolo – DVD
Riproduzione casuale
– DVD/Video CD/CD
Prem ere il pulsante RANDOM una volta e
quindi quello ENTER o PLAY 3.
Si possono riprodurre titoli, capitoli o brani di un disco in
ordine casuale.
L’indicazione “Random Chapter” appare sullo schermo
ed i capitoli all’interno del titolo vengono riprodotti in
ordine casuale.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
REP EAT
ANGLE
AUDIO
S ETUP
SUB TITLE
REP EAT
A-B
M ENU TOP MENU
RETURN
DISPLA
Y
Riproduzione in ordine casuale di
titoli
5
¶
¶
E
R
E
ENTER
NEXT
P REV
¢
4
5
¶
¶
NEXT ¢
PREV 4
Prem ere il pulsante RANDOM due volte e
P LAY
3
PAUS E
8
S TOP
7
¶
quindi quello ENTER o PLAY 3.
PLAY 3
1REV FW D
¡
eS TEP / S LOW
E
L’indicazione “Random Title” appare sullo schermo ed i
titoli vengono riprodotti in ordine casuale.
CLEAR
2
3
6
9
1
CLEAR
+1 0
5
4
7
0
8
PROGRAM SEARCH MODE
RANDOM
Î
RANDOM
Riproduzione in ordine casuale di
brani – Video CD/CD
Prem ere il pulsante RANDOM.
L’indicazione “Random ” appare sullo schermo ed i brani
vengono riprodotti in ordine casuale.
Per cam biare titoli, capitili o brani durante la
riproduzione casuale
•
Premere il pulsante NEXT ¢ ed il brano
programmato successivo cambia.
•
Premere il pulsante PREV 4 ed il brano
programmato attuale riprende dall’inizio.
Per abbandonare la riproduzione casuale
Premere il pulsante CLEAR. Ciò vi riporta alla
riproduzione normale di capitoli in ordine dal capitolo o
brano attualmente in riproduzione.
Note
•
Nel caso dei dischi Video CD, la riproduzione casuale non è
possibile durante la riproduzione se il menu è visualizzato
(riproduzione PBC). Per eseguire la riproduzione casuale, è
necessario iniziare la riproduzione senza visualizzare un
menu premendo il pulsante di un numero di brano a lettore
fermo e premendo quindi il pulsante RANDOM.
La riproduzione casuale di capitoli o brani programmati non
è possibile.
Nel caso dei DVD, la riproduzione casuale può non essere
possibile con alcuni dischi.
Nel caso dei DVD, la riproduzione programmata può non
essere possibile con certi dischi. In questi casi potrebbe
•
•
•
apparire il marchio
.
40
It
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Nella finestra di program m azione, usare i
pulsanti num erici per im postare i num eri
dei titoli o dei capitoli nell’ordine di
program m azione desiderato.
Riproduzione di brani in un
ordine particolare
(riproduzione programmata)
– DVD/Video CD/CD
•
Per programmare i titoli o capitoli 9, 7 e 18 di un
DVD in quest’ordine, premere 9, 7, +10 e 8.
I titoli ed i capitolo all’interno di un titolo di un DVD e
analogamente i brani di un Video CD o CD possono
venire predisposti per la riproduzione in un certo ordine.
Program Chapter
Program Chapter ProgramTitle
ProgramTitle
Title
2(/20)
Current:
Title
Title
Current:
7
Chapter
1
1
(Chapter 1~ 18)
09 07 18
09 07 18
Program m azione di DVD
Possono venire programmati programmi da sino a 24
fasi.
Program Memory – Off
Program Memory – Off
Move ENTER Play
ENTER
PROGRAM
PROGRAM
Exit
Move
Play
Exit
5
Prem ere il pulsante ENTER o PLAY 3.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
•
•
La riproduzione inizia nell’ordine da voi impostato.
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
Premere il pulsante PROGRAM per tornare al
display precedente. Il programma non inizia sino a
che non viene premuto PLAY 3.
REP EAT
A-B
M ENU TOP MENU
RETURN
DISPLAY
5
¶
¶
2
2, 3
5
NEXT
P REV
¢
4
5
¶
¶
Per program m are una pausa in un program m a:
P LAY
3
PAUS E
8
S TOP
7
Premere il pulsante PAUSE 8 invece di un numero.
L’indicazione “8” appare sullo schermo e la pausa è
programmata.
¶
STOP 7
5
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
CLEAR
+1 0
5
4
7
Una pausa non può venire programmata come prima o
ultima fase del programma e non si possono
programmare due o più fasi consecutive.
4
0
8
PROGRAM SEARCH MODE
RANDOM
Î
Per cancellare un num ero:
Usare i pulsanti del cursore (5/∞/2/3) per evidenziare
il numero da cancellare e quindi premere il pulsante
CLEAR.
1
Il numero viene cancellato. Se dopo di esso si trovavano
altri numeri, essi vengono aggiornati automaticamente.
Per inserire un num ero:
1
Prem ere il pulsante PROGRAM.
La schermata di programmazione appare.
Usare i pulsanti del cursore (5/∞/2/3) per evidenziare
il numero da far seguire al nuovo numero e quindi
premere i pulsanti num erici per impostare il nuovo
numero stesso.
Program Chapter
Current:
Program Chapter ProgramTitle
ProgramTitle
Title
2(/20)
Current:
Title
Title
7
Chapter
1
Il nuovo numero viene inserito prima del numero
precedentemente scelto.
1
(Chapter 1~ 18)
Per ferm are la riproduzione program m ate
Premere il pulsante STOP 7.
Program Memory – Off
Program Memory – Off
Move
ENTER Play
Move ENTER Play
PROGRAM Exit
PROGRAM Exit
Note
•
•
•
Quando si programmano capitoli, sullo schermo possono
apparirne anche di non programmati. Questo non è un
guasto.
2
3
Usare i pulsanti del cursore (2/ 3) per
scegliere il capitolo o il titolo da
program m are.
La programmazione può non essere possibile con alcuni
DVD. In tal caso, sullo schermo appare l’icona
la programmazione viene tentata.
quando
Durante la programmazione di capitoli, possono venire
programmati solo capitoli compresi nello stesso titolo.
Una volta che il tipo di program m a è stato
scelto, usare il pulsante (∞) del cursore per
entrare nella finestra di program m azione.
Se si è scelto [Program Chapter], si deve anche
scegliere in quale titolo i capitoli da programmare si
trovano. Usare i pulsanti del cursore (5) per
evidenziare “Title” ed usare i pulsanti num erici
per impostare il numero del titolo da usare.
41
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmazione con Video CD e CD
Opzioni di program m azione
addizionali – DVD/Video CD/CD
Si possono memorizzare programmi da sino a 24 fasi.
Dopo che si è memorizzato un programma, è possibile
confermare, aggiungere o cancellarne il contenuto a
piacere.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
REP EAT
ANGLE
AUDIO
S ETUP
SUB TITLE
REP EAT
A-B
Per controllare il contenuto di un program m a:
M ENU TOP MENU
In un Video CD o CD, premere il pulsante PROGRAM
per poter controllare il contenuto di un programma. La
schermata di programmazione visualizza quindi il
programma attuale.
RETURN
DISPLA
Y
5
¶
¶
Pulsanti del
cursore
2
3
3
NEXT
¢
P REV
4
5
¶
¶
Con un DVD, scegliere il tipo di programma (titolo o
capitolo) con i pulsanti del cursore (2/3). Il titolo o
capitolo programmato del DVD può quindi venire
confermato sulla schermata di programmazione.
P LAY
3
PAUS E
8
S TOP
7
¶
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
CLEAR
+1 0
5
4
7
2
0
8
Per aggiungere un program m a:
PROGRAM SEARCH MODE
RANDOM
Î
1 Premere il pulsante PROGRAM.
2 Premere un pulsante num erico per aggiungere un
nuovo titolo, capitolo o brano.
1
3 Premere il pulsante PROGRAM per abbandonare la
schermata di programmazione.
Per cancellare un program m a:
1 Premere il pulsante PROGRAM.
1
Prem ere il pulsante PROGRAM.
2 Scegliere il programma da cancellare con i pulsanti
del cursore (2/3) e quindi premere CLEAR.
3 Premere il pulsante PROGRAM per abbandonare la
La schermata di programmazione appare. Se si è
caricato un Video CD o un CD, il cursore appare
nella finestra di programmazione.
schermata di programmazione.
ProgramTrack
Current:Track
TotalTime
1(/10)
0.00
Note
•
Il programma viene completamente cancellato anche se il
piatto portadisco è aperto o l’unità è spenta o in attesa.
Premendo il pulsante CLEAR a disco fermo si cancellano
tutti i programmi.
•
Move ENTER Play
Exit
PROGRAM
2
3
Usare i pulsanti num erici per im postare il
num ero dei brani nell’ordine di
program m azione desiderato.
•
Per programmare i titoli o capitoli 9, 7 e 18 di un
DVD in quest’ordine, premere 9, 7, +10 e 8.
•
Per editare un programma, consultare le
procedure esposte alla pagina precedente.
Prem ere il pulsante ENTER o PLAY 3.
•
•
La riproduzione inizia nell’ordine da voi impostato.
Per far cessare la riproduzione programmata,
premere il pulsante STOP 7.
Note
•
Per programmare una pausa, aggiungere un numero o
cancellarlo, consultare le procedure di programmazione di
DVD a pagina 41.
•
La programmazione non è possibile durante la riproduzione
PBC di Video CD utilizzando i menu.
42
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Per program m are un capitolo durante la
Per cancellare un program m a salvato in
riproduzione – DVD/Video CD/CD
m em oria – DVD
Con questo lettore potete programmare quanto vedete o
ascoltate durante la riproduzione di un DVD, Video CD o CD.
Il lettore cancella i programmi in ordine cronologico
quando il numero dei programmi stessi supera il
massimo consentito. Per evitare che il lettore cancelli
programmi vecchi ma che usate ancora, è possibile
scegliere manualmente i programmi da cancellare.
Mantenere prem uto il pulsante PROGRAM per
alm eno due secondi in un punto qualsiasi
durante la riproduzione di un titolo, di un
capitolo o di un brano da program m are e ciò
viene fatto senza visualizzare alcun m enu. A
program m azione avvenuta, quanto
1
2
3
Caricare un DVD che ha un program m a in
m em oria.
Prem ere il pulsante PROGRAM.
La schermata di programmazione appare.
program m ato viene visualizzato sul display
insiem e alla sua posizione nel program m a.
Usare i pulsanti del cursore (∞) per
evidenziare [Program Mem ory] ed usare i
pulsanti del cursore (3/ ∞) per scegliere
[Off].
Chapter 07 3 Program 03
4
Prem ere ENTER.
Il programma viene cancellato dalla memoria.
Per controllare il contenuto di un program m a:
Premere il pulsante PROGRAM.
Note
•
Se si usa questa funzione per programmare materiali da
DVD, il programma creato corrisponde alla schermata di
programmazione (di capitoli o titoli) che appare quando
PROGRAM viene premuto. Esser certi di aver scelto il tipo
di programma giusto.
•
Non si può fare un programma contenente capitoli di titoli
differenti.
Per m em orizzare un program m a – DVD
Questo lettore può memorizzare programmi per sino a
24 DVD. Portando su [On] la caratteristica di memoria di
programmi [Program Mem ory], il lettore salva il
programma e lo richiama ogni volta che viene caricato
quel disco. Se il numero di programmi in memoria
supera i 24, i programmi più vecchi vengono cancellati
per far posto a quelli nuovi.
1
Usare il pulsante (∞) del cursore per
evidenziare [Program Mem ory] ed usare i
pulsanti (3) del cursore per scegliere [On].
Program Chapter ProgramTitle
Current:
Title
Title
1
7
Chapter
1
(Chapter 1 ~ 49)
09 07 18
Program Memory On
Off
PROGRAM
Move
Exit
2
Prem ere il pulsante ENTER.
Il programma viene memorizzato.
Nota
Se si carica un DVD per cui si è memorizzato un programma,
la riproduzione programmata ha inizio automaticamente.
43
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Mem orizzazione di un punto Last
Mem ory
Continuazione della riproduzione
da una posizione particolare
(Last Memory) – DVD/Video CD
1
Prem ere il pulsante LAST MEMORY
durante la riproduzione.
La funzione di memoria dell’ultima posizione Last
Memory è conveniente per riprendere in un secondo
momento la visione di un disco dal punto di interruzione.
A differenza della funzione di ripresa della riproduzione,
la memoria di ultima posizione funziona anche se nel
frattempo il DVD è stato tolto dal lettore. (I dati Last
Memory di dischi Video CD rimangono in memoria però
solo se il disco rimane nel lettore).
L’indicatore “LAST MEMO” si illumina sul display.
2
Prem ere il pulsante per portare l’unità
nel m odo di attesa o ferm are la
riproduzione con il pulsante STOP 7.
Una volta memorizzato, il punto scelto viene
richiamato anche se nel frattempo l’unità è stata
spenta o il disco è stato espulso. Si possono
memorizzare sino a cinque punti di cinque dischi
diversi e quei punti vengono richiamati quando il
disco corrispondente viene caricato.
LAST
MEMORY
•
Un punto Last Memory può venire memorizzato
per solo un Video CD alla volta, dato che esso
viene cancellato nel momento in cui il disco viene
tolto dal lettore.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
REP EAT
A-B
M ENU TOP MENU
RETURN
DISPLAY
5
¶
¶
2
Ripresa della riproduzione dal
punto di pressione di LAST
MEMORY
NEXT
P REV
¢
4
5
¶
¶
P LAY
3
PAUS E
8
S TOP
7
¶
STOP 7
PLAY 3
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
CLEAR
1
Caricare il disco per il quale si era
m em orizzato il punto Last Mem ory.
+1 0
5
4
7
0
8
Alcuni DVD iniziato la riproduzione automaticamente
quando vengono caricati. In tal caso, è necessario
premere il pulsante STOP 7 per fermare la
riproduzione.
PROGRAM SEARCH MODE
RANDOM
Î
2
Prem ere LAST MEMORY a lettore ferm o.
Il disco inizia a venire riprodotto dal punto Last
Memory in memoria.
•
Il modo Last Memory può non funzionare con
certi DVD.
•
Se si tenta la registrazione di più di cinque punti
Last Memory, il più recente sostituisce in
memoria quello più vecchio.
•
•
Anche con dischi per cui si è memorizzato un
punto Last Memory, la riproduzione inizia
dall’inizio del disco quando si preme il pulsante
PLAY 3.
Questa funzione serve per la riproduzione di soli
DVD o Video CD. Non può invece venire usata
per CD.
Cancellazione delle m em oria Last Mem ory
Richiamare il contenuto di una locazione di memoria Last
Memory premendo LAST MEMORY. Premere poi il
pulsante CLEAR mentre l’indicazione “Last Mem ory” è
ancora visualizzata sullo schermo.
L’indicatore “LAST MEMO” scompare dal display.
44
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Se si carica un disco le cui im postazioni sono
state m em orizzate
L’indicazione “Condition Mem ory” viene visualizzata e
Memorizzazione di impostazioni
per DVD visti spesso
le impostazioni in memoria vengono utilizzate.
(Condition Memory) – DVD
Si possono memorizzare nel lettore le impostazioni
desiderate per DVD usati spesso. Tali dati rimangono in
memoria anche se il disco viene tolto dal lettore o se
questo viene portato nel modo di attesa. Se si carica un
disco i cui dati sono in memoria, l’indicazione
“CONDITION” appare sul display. Quando si inizia la
riproduzione di un disco, le eventuali impostazioni
memorizzate vengono utilizzate.
Cancellazione del contenuto della m em oria
Caricare un disco le cui impostazioni sono state
memorizzate e premere il pulsante CLEAR quando
l’indicazione “Condition Mem ory” viene visualizzata.
Le impostazioni memorizzate vengono così cancellate.
Note
•
Le impostazioni in memoria possono venire usate in
qualsiasi momento.
CONDITION
MEMORY
•
Si possono memorizzare le impostazioni di sino a 15 dischi
DVD. Se ne memorizzate di più, la più recente cancella la
più vecchia. In seguito, se si carica un disco le cui
impostazioni sono state cancellate, vengono usate quelle
del disco più recente.
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
•
•
Se si portano cambiamenti alle impostazioni in memoria,
premere il pulsante CONDITION MEMORY durante la
riproduzione per memorizzare le nuove impostazioni.
La commutazione del modo multi lingue e di altri modi è
automatica nel caso di alcuni dischi.
REP EAT
A-B
M ENU TOP MENU
RETURN
DISPLA
Y
5
¶
¶
E
R
E
2
NEXT
P REV
¢
4
5
¶
¶
P LAY
3
PAUS E
8
S TOP
7
¶
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
3
6
9
1
CLEAR
+1 0
5
4
7
0
8
PROGRAM SEARCH MODE
RANDOM
Î
Prem ere il pulsante CONDITION MEMORY
durante la riproduzione.
Le impostazioni vengono memorizzate per il disco che
sta venendo riprodotto.
Vengono m em orizzate le seguenti sei im postazioni:
Schermata TV (pagina 27)
posizione delle indicazioni OSD (pagina 28)
Riprese multi angolazione (pagina 29)
Multilingua (pagina 30)
Sottotitoli Multi-Language (pagina 32)
Livello di blocco della visione (pagina 35)
45
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Il display cam bia per ogni tipo di disco ogni volta che
viene prem uto il pulsante DISPLAY.
Visione delle informazioni dei
dischi
Usare il pulsante DISPLAY per ottenere la visualizzazione
sul display delle informazioni sul disco attualmente
caricato. Si possono ottenere informazioni sui titoli e
capitoli che il DVD contiene o sui brani di un Video CD o
CD. Quando si vede un DVD, si può anche controllare la
velocità di trasmissione dei dati.
– DVD/Video CD/CD
DVD
Inform azioni sui titoli
(TITLE)
Play
Title
2–1
–0.05/ 0.29
0.24
Riga superiore: numero di
titolo e capitolo, tempo
trascorso del titolo attuale
Riga inferiore: tempo
rimanente del titolo, tempo
totale del titolo
OPEN/
CONDITION CLOSE
MEMORY
LAST
MEMORY
«
REP EAT
AUDIO
S ETUP
SUB TITLE ANGLE
REP EAT
A-B
Inform azioni sui capitoli
(CHAPTER)
M ENU TOP MENU
Play
Chapter
1–1
1.19/ 2.18
1.19
RETURN
DISPLAY
5
¶
¶
DISPLAY
Riga superiore: titolo e
numero di capitolo, tempo
trascorso del titolo attuale
NEXT
P REV
¢
4
5
¶
¶
P LAY
3
PAUS E
8
S TOP
7
Riga inferiore: tempo
rimanente del capitolo
attuale, durata totale del
capitolo
¶
1REV FW D
¡
eS TEP / S LOW
E
CLEAR
2
1
3
6
9
«
+1 0
5
4
7
0
8
Inform azioni sui capitoli
(CHAPTER)
Play
Chapter
1–1
–0.59/ 2.18
1.19
PROGRAM SEARCH MODE
RANDOM
Î
Riga superiore: titolo e
numero di capitolo, tempo
trascorso del titolo attuale
Riga inferiore: tempo
rimanente del capitolo
attuale, durata totale del
capitolo
«
Velocità di trasm issione
dati digitali
Prem ere il pulsante DISPLAY durante la
riproduzione di un disco.
Play
Tr. Rate
1–1
1.32
8.9
:
Prem ere il pulsante DISPLAY più volte per
cam biare l’inform azione visualizzata.
Riga superiore: titolo e
numero di capitolo, tempo
trascorso del titolo attuale
Le informazioni sul disco sono visualizzate
sovrapponendole all’immagine sullo schermo.
Riga inferiore: velocità
trasmissione dati digitali
«
Mantenere prem uto DISPLAY per visualizzare
il tem po di riproduzione rim anente sul disco.
Scom pare
Quando si lascia andare il pulsante, l’informazione
scompare.
Nota
A seconda del formato e del tipo di disco usato, possono
venire visualizzate solo alcune delle schermate disponibili.
46
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Prem ere il pulsante DISPLAY a disco ferm o per
visualizzare il titolo e le inform azioni sui capitoli del
DVD o le inform azioni sui brani di un Video CD o CD.
Prem ere il pulsante DISPLAY di nuovo per fare
scom parire queste indicazioni.
CD
Inform azioni sui brani
Play
Track
1
0.03
3.32
–3.29/
Riga superiore: numero del
brano in corso e sua durata
Le informazioni sui titoli ed i capitoli o brani di un disco
possono venire visualizzate. Quando le informazioni non
possono venire visualizzate per intero sul display, usare i
pulsanti del cursore (2/3) del display per portarsi alle
altre schermate non visibili.
Riga inferiore: tempo
rimanente del brano in corso
e sua durata complessiva
«
DVD
Inform azioni sul disco
Play
All
1/2
0.15
Inform azioni su DVD
–6.15/ 6.32
Information: DVD
Riga superiore: numero del
brano in corso, numero totale
di brani, numero totale di
brani sul CD, tempo trascorso
totale del CD
Se si carica un DVD,
Title
01
02
03
04
Chapter Title
Chapter
1~ 1
1~ 1
1~ 1
1~ 4
1~ 1
1~ 1
1~ 1
1~ 1
1~ 1
06
07
08
09
ciascun titolo ed il num ero
di capitoli entro ciascun
titolo vengono
05
visualizzati.
DISPLAY
Exit
Riga inferiore: tempo
rimanente del CD, durata
totale del CD
1/1
«
Scom pare
Video CD e CD
Inform azioni su Video CD
e CD
Information: Compact Disc
Total Time
Track
01
6.30
Video CD (funzione PBC disattivata)
Time
3.32
2.58
Se si carica un Video CD o
CD, la durata com plessiva
di un disco e quella di
ciascuno dei suoi brani
vengono visualizzate.
02
Inform azioni sul disco
Play
All
5/10
–2.38/ 22.57
20.19
DISPLAY
Exit
1/1
Riga superiore: numero brani
in corso, numero totale dei
brani e durata totale del
Video CD
Resettaggio del sistema
Per reinizializzare il lettore, mantenere premuto il
pulsante 7 (arresto) dell’unità principale e premere
STANDBY/ ON accenderendo l’unità.
Riga inferiore: tempo
rimanente del Video CD,
durata totale del Video CD
«
Tutto il contenuto della memoria, tutte le impostazioni
salvate, ad esempio quelle Last Memory e Condition
Memory vengono cancellate e tutti i menu della
schermata Setup vengono riportati alle impostazioni di
fabbrica.
Inform azioni sui brani
Play
Track
5
20.19
2.38/ 4.40
Riga superiore: numero
brano attuale, tempo
trascorso tale del Video CD
Riga inferiore: durata della
porzione riprodotta del brano,
durata totale del brano
«
Inform azioni sui brani
Play
Track
5
20.19
–2.02/ 4.40
Riga superiore: numero
brano attuale, tempo
trascorso tale del Video CD
Riga inferiore: tempo
rimanente del brano, durata
totale del brano
«
Scom pare
Nota
Quando si riproduce un Video CD nel modo PBC o CD-R non
finalizzati, non tutte le informazioni viste vengono visualizzate.
47
It
Download from Www.Somanuals.com. All Manuals Search And Download.
USATI I DISCHI, CONSERVATELI
VERTICALMENTE
Riprodotto un disco, toglietelo dal lettore e rimettetelo
nella sua custodia. Conservarlo quindi verticalmente
lontano dal calore e dall’umidità.
Informazioni
addizionali
•
Conservare i dischi con la dovuta cura. Se vengono
conservati ad una certa angolazione o uno sopra
l’altro, possono deformarsi perfino se contenuti nelle
loro custodie.
•
Non lasciare i dischi in luoghi esposti a luce solare
diretta o calore, ad esempio un’automobile
parcheggiata al sole.
Cura Dei Dischi
COME TENERE I DISCHI
Caricare o togliere i dischi
tenendoli per i bordi senza
toccarne le superfici.
AVVERTENZE PER L’USO DEI DISCHI
Tutti i diritti riservati.
La riproduzione in pubblico, la trasmissione e la
duplicazione non autorizzate sono contrarie alla legge.
PULIZIA
Le impronte digitali e lo sporco sul disco possono
influenzare la qualità del suono e delle immagini.
Perché l’unità duri a lungo
Per pulire i propri dischi, usare un panno soffice e pulito.
Se necessario, inumidirlo con detergente neutro diluito
con acqua e togliere sporco tenace.
NON SPOSTARE IL LETTORE DURANTE LA
RIPRODUZIONE
Durante la riproduzione, il disco gira ad alta velocità.
NON sollevarlo o spostarlo durante la riproduzione.
Facendolo potreste danneggiare il disco.
PER SPOSTARE IL LETTORE
Non passare il panno sul
disco m uovendolo
circolarm ente. I graffi
concentrici sul disco creano
m olto rum ore.
Pulire passando il panno
dal centro verso
l’esterno.
Se si cambia la posizione di installazione del lettore o la si
imballa per un trasloco, togliere sempre il disco dal piatto
e riportarlo nella posizione di chiusura. Premere poi
STANDBY/ ON e portare l’unità nel modo di attesa
(STANDBY). Controllare che l’indicazione “--OFF--”
sul display si spenga, quindi scollegare il cavo di
alimentazione. Spostando il lettore con un disco caricato
su può danneggiare sia il disco che il lettore.
I dischi non devono venire puliti con spray per la pulizia
di dischi o antistatici. Non usare neppure liquidi volatili
come benzina e diluente.
NON RIPRODURRE MAI DISCHI DEFORMATI O
INCRINATI
Il disco, mentre viene riprodotto,
gira ad alta velocità. Non riprodurre
mai dischi deformati o crepati. Essi
possono causare danni o errori di
funzionamento.
INSTALLAZIONE
•
•
•
Installare l’unità in una posizione stabile sul lato del
televisore o impianto stereo.
Se si usa l’unità in un sistema stereo, installare i
diffusori a qualche distanza dal lettore.
NON installare l’unità sopra un televisore o monitor a
colori. Installarlo lontano da qualsiasi dispositivo che
generi campi magnetici, ad esempio registratori a
cassette.
NON USARE DISCHI DI FORMA INSOLITA
I CD di forma insolita, ad esempio a cuore od ottagonali,
possono causare problemi.
•
NON posare alcun oggetto sull’unità.
Usandoli potete danneggiare il
lettore. Non fatene uso.
EVITARE L’INSTALLAZIONE IN LUOGHI:
•
•
•
•
•
•
esposti a luce solare diretta
esposti ad umidità o poco ventilati
troppo caldi o freddi
esposti a vibrazioni
esposti alla polvere
esposti a fumi oleosi, vapore o calore, ad esempio in
una cucina.
NON BLOCCARE LA VENTILAZIONE
NON usare il lettore posandolo su di un tappeto a fibre
lunghe, su di un letto o sofà e non coprirlo con panni. Ciò
impedirebbe la dispersione del calore che genera e
potrebbe causare danni seri.
48
It
Download from Www.Somanuals.com. All Manuals Search And Download.
EVITARE IL CALORE INTENSO
PULIZIA DELL’APPARECCHIO
NON installare l’unità vicino a apparecchi che generino
molto calore, ad esempio un amplificatore.
Se la si installa in uno scaffale, porla più in basso
possibile, ma senza che sia esposta a polvere, e
separarla dall’amplificatore per evitare il calore generato
dall’amplificatore o altri dispositivi audio.
Pulire il lettore con un panno soffice e pulito. Per lo
sporco pió tenace, inumidire il panno con detergente
debole diluiti in 5 o 6 parti di acqua e strizzarlo bene.
Asciugare quindi la superficie con un panno asciutto.
Non usare mai sostanze chimiche volatili come benzina e
diluente, dato che esse possono danneggiare le finiture
dell’unità.
ATTENZIONE: PER INSTALLARE IL LETTORE
SU DI UNO SCAFFALE CON PORTE DI VETRO
Controllare che fra l’unità e le porte vi sia spazio in
abbondanza perché il piatto portadisco si possa aprire
quando si usa il telecomando. Se il piatto portadisco
incontra resistenza quando tenta di aprirsi, il lettore
può riportare danni seri.
PULITORE LENTI
La lente della testina di lettura del lettore non dovrebbe
sporcarsi, ma se per qualche ragione non dovesse
funzionare bene a causa di sporco accumulatosi su di
essa, entrare in contatto col più vicino centro assistenza
PIONEER. I pulitori per lenti sono in vendita, ma devono
venire usati con particolare cura, dato che possono
danneggiare la lente.
FORMAZIONE DI CONDENSA
NOTE SULL’USO DI CAVI A FIBRE OTTICHE
(solo DV-535)
Se il lettore viene portato improvvisamente da una
stanza ad una fredda o se la temperatura ambiente sale
velocemente, al suo interno si possono formare gocce di
condensa. Se ciò accade, il lettore non può funzionare
bene.
Per evitare che ciò accada, lasciare che il lettore riposi
per circa un’ora prima di tentare di usarlo o far salire la
temperatura ambiente in modo graduale.
La condensa si può
•
Non far fare angoli acuti al cavo. Conservarlo in rotoli
di almeno 15 cm di diametro.
•
Collegare i cavi spingendoli a fondo
nei loro terminali.
15 cm di
•
•
Non usare cavi da più di 3 m.
diam etro o più
Se sulla spina si sono raccolti sporco
e polvere, pulirla con un panno soffice
prima di collegarla.
formare anche se
durante l’estate il
lettore viene esposto
ad aria fresca prodotta
da un climatizzatore. In
tali casi, spostare il lettore.
PORTARE L’INTERRUTTORE POWER SU
STANDBY QUANDO NON SI USA L’UNITÀ
A seconda dell’intensità del segnale, televisivo o radio,
accendendo un televisore o radio vicino
all’unità si possono causare disturbi
sullo schermo o all’audio. Questo non è
però un guasto e spegnendo
quest’unità la situazione torna alla
normalità. In tal caso, spegnere l’unità.
AVVERTENZE PER IL CAVO DI
ALIMENTAZIONE
Scollegare il cavo di alimentazione dalla sua presa
sempre tirando la spina e mai il cavo. Non tirare mai
direttamente il cavo e non toccarlo con le mani bagnate,
dato che l’acqua può causare corto circuiti o folgorazioni.
Non posare il lettore o alcun altro oggetto sul cavo di
alimentazione. Non annodare il cavo di alimentazione. I
cavi di alimentazione devono venire stesi in modo che
non vengano calpestati. Un cavo di alimentazione
danneggiato può esser causa di guasti o incendi.
Controllare una volta ogni tanto che il cavo sia in buone
condizioni. Se si riscontrano danni, rivolgersi al Centro
assistenza PIONEER più vicino per le riparazioni del caso.
49
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Lista codici di lingua
I codici di lingua sono usati per le preferenze audio e dei
sottotitoli. Consultare in proposito pagina 33.
Codice da
im postare
Codice da
im postare
Codice da
im postare
Lingua
Gujarati (gu)
Lingua
Lingua
Japanese (ja)
English (en)
French (fr)
1001
0514
0618
0405
0920
0519
2608
1412
1620
1922
1821
1115
0512
0101
0102
0106
0113
0118
0119
0125
0126
0201
0205
0207
0208
0209
0214
0215
0218
0301
0315
0319
0325
0401
0426
0515
0520
0521
0601
0609
0610
0615
0625
0701
0704
0712
0714
0721
0801
0809
0818
0821
0825
0901
0905
0911
0914
0919
0923
1009
1023
1101
1111
1112
1113
1114
1119
1121
1125
1201
1214
1215
1220
1222
1307
1309
1311
1312
1314
1315
1318
1319
1320
1325
1401
1405
1415
1503
1513
1518
1601
1612
1619
1721
Rhaeto-Romance (rm)
Kirundi (rn)
Romanian (ro)
Kinyarwanda (rw)
Sanskrit (sa)
Sindhi (sd)
1813
1814
1815
1823
1901
1904
1907
1908
1909
1911
1912
1913
1914
1915
1917
1918
1919
1920
1921
1923
2001
2005
2007
2008
2009
2011
2012
2014
2015
2018
2019
2020
2023
2111
2118
2126
2209
2215
2315
2408
2515
2621
Hausa (ha)
Hindi (hi)
German (de)
Italian (it)
Croatian (hr)
Hungarian (hu)
Armenian (hy)
Interlingua (ia)
Interlingue (ie)
Inupiak (ik)
Spanish (es)
Chinese (zh)
Dutch (nl)
Sangho (sg)
Serbo-Croatian (sh)
Sinhalese (si)
Slovak (sk)
Portuguese (pt)
Swedish (sv)
Russian (ru)
Korean (ko)
Greek (el)
Indonesian (in)
Icelandic (is)
Hebrew (iw)
Yiddish (ji)
Slovenian (sl)
Samoan (sm)
Shona (sn)
Afar (aa)
Javanese (jw)
Georgian (ka)
Kazakh (kk)
Somali (so)
Albanian (sq)
Serbian (sr)
Siswati (ss)
Sesotho (st)
Sundanese (su)
Swahili (sw)
Tamil (ta)
Abkhazian (ab)
Afrikaans (af)
Amharic (am)
Arabic (ar)
Greenlandic (kl)
Cambodian (km)
Kannada (kn)
Kashmiri (ks)
Kurdish (ku)
Kirghiz (ky)
Assamese (as)
Aymara (ay)
Azerbaijani (az)
Bashkir (ba)
Byelorussian (be)
Bulgarian (bg)
Bihari (bh)
Telugu (te)
Latin (la)
Tajik (tg)
Lingala (ln)
Thai (th)
Laothian (lo)
Lithuanian (lt)
Latvian (lv)
Tigrinya (ti)
Turkmen (tk)
Tagalog (tl)
Bislama (bi)
Bengali (bn)
Tibetan (bo)
Breton (br)
Malagasy (mg)
Maori (mi)
Setswana (tn)
Tonga (to)
Catalan (ca)
Corsican (co)
Czech (cs)
Macedonian (mk)
Malayalam (ml)
Mongolian (mn)
Moldavian (mo)
Marathi (mr)
Malay (ms)
Turkish (tr)
Tsonga (ts)
Tatar (tt)
Welsh (cy)
Twi (tw)
Danish (da)
Bhutani (dz)
Esperanto (eo)
Estonian (et)
Basque (eu)
Persian (fa)
Finnish (fi)
Ukrainian (uk)
Urdu (ur)
Maltese (mt)
Burmese (my)
Nauru (na)
Uzbek (uz)
Vietnamese (vi)
Volapük (vo)
Wolof (wo)
Xhosa (xh)
Nepali (ne)
Norwegian (no)
Occitan (oc)
Oromo (om)
Oriya (or)
Fiji (fj)
Yoruba (yo)
Zulu (zu)
Faroese (fo)
Frisian (fy)
Irish (ga)
Panjabi (pa)
Scots-Gaelic (gd)
Galician (gl)
Guarani (gn)
Polish (pl)
Pashto, Pushto (ps)
Quechua (qu)
50
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Le im postazioni fatte sono state cancellate.
Diagnostica
Quando l’unità viene spenta da una caduta di tensione
o scollegando il cavo di alimentazione, tutte le
impostazioni fatte vengono perse.
Spesso quello che viene scambiato per un guasto è solo
un errore di uso dell’unità. Se si ritiene che questa sia
guasta, controllare la sezione che segue. A volte il
problema può risiedere in un altro componente.
Controllare gli altri componenti del sistema. Se il
problema non può venire rimediato neppure leggendo
questa pagina, rivolgersi al centro assistenza PIONEER
più vicino per le riparazioni del caso.
\
Prima di scollegare il cavo di alimentazione,
premere STANDBY/ ON e controllare che “--
OFF--” scompaia dallo schermo.
Im m agine o colore assente
I collegamenti non sono scorretti.
\
Controllare che i collegamenti siano corretti e che
gli spinotti siano bene inseriti.
Il piatto portadisco esce di nuovo im m ediatam ente
dopo che si è caricato un disco.
Il disco è sporco o deformato.
Le impostazioni interne del lettore sono scorrette.
\
Se i collegamenti AV CONNECTOR sono stati
fatti, controllare che l’impostazione [Video Out]
del menu Video della schermata di Setup
corrisponda alle capacità del televisore o monitor
cui ci si è collegati (pagina 28).
\
Controllare la sezione ‘Cura Dei Dischi’ (pagina
48).
Il disco non è ben caricato sul piatto portadisco.
\
Caricare il disco controllando le guide sul piatto
portadisco (pagina 19).
L’uso (o le impostazioni) fatto del televisore o
dell’amplificatore non è corretto.
\
Esser certi che il proprio televisore,
sintoamplificatore o amplificatore sia impostato
per la visione di DVD.
Il numero di regione non è lo stesso di quello
dell’unità.
\
Se il numero di regione del disco e del lettore
sono diversi, il disco non può venire usato (pagina
54).
L’im m agine sullo scherm o è allungata o le sue
proporzioni non cam biano.
Il lettore contiene condensa.
Le impostazioni fatte per le proporzioni dell’immagine
non sono corrette.
\
Lasciare riposare il lettore il tempo necessario
perché questa evapori. Se il lettore si trova vicino
ad un condizionatore d’aria, allontanarlo (pagina
49).
\
Cambiare le proporzioni dell’immagine in [TV
Screen] del menu Video della schermata Setup
nel modo adatto allo schermo o monitor che si
possiede (pagina 27).
La riproduzione non è possibile.
L’im m agine riprodotta è disturbata o scura.
Il disco è stato caricato alla rovescia.
\
Controllare che l’etichetta del disco sia rivolta in alto.
Questo lettore è compatibile col sistema
antiduplicazione Macro-Vision. Alcuni dischi
contendono codici di prevenzione della duplicazione e,
quando vengono riprodotti, possono su certi televisori
causare la presenza di rumore sullo schermo.
Il m archio
appare sullo scherm o.
La funzione scelta non può venire usata per il disco.
Il m archio appare sullo scherm o.
La funzione scelta non viene permessa dal lettore.
\
Questo non è un guasto.
La posizione del selettore TV SYSTEM è stata
cambiato durante l’uso del lettore.
La riproduzione si ferm a e i pulsanti di funzione non
rispondono.
\
\
Il cambio della posizione del selettore TV
SYSTEM non ha alcun effetto durante la
riproduzione. Fermare prima il lettore.
Fermare la riproduzione (premendo STOP 7) e
riprenderla da capo.
I dischi rispondono a volte diversamente a certe
funzioni del lettore, producendo oscuramenti dello
schermo o sfarfallamenti quando una di esse viene
eseguita.
Le nuove im postazioni fatte nella scherm ata Setup
durante la riproduzione non entrano in atto.
Alcune impostazioni possono venire cambiate durante
la riproduzione, ma non entrano in funzione se questa
non cessa. Questo non è un guasto.
\
Questi fenomeni sono dovuti alla natura del
segnale e dei dischi e non costituiscono un
guasto.
\
Fare questa regolazione a lettore fermo.
\
Fermare la riproduzione premendo il (pulsante
STOP 7) e quindi riprenderla. Le nuove
impostazioni dovrebbero così entrare in effetto.
Tenere presente che facendo regolazioni nella
schermata Setup potreste cancellare la funzione di
ripresa della riproduzione dal punto di interruzione.
Quando si fanno cam biam enti nelle scherm ata
Setup, viene visualizzata l’indicazione
.
L’unità contiene un Video CD o un CD e le impostazioni
che sono state modificate valgono solo per i DVD.
\
Le impostazioni entrano in funzione la prossima
volta che si carica un DVD.
51
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Le prese di uscita analogiche em ettono segnale
audio m a non quelle digitali.
Il volum e di riproduzione di DVD e CD è differente.
I DVD e CD usano metodi di registrazione differenti.
Il lettore non è regolato correttamente.
\
Questo non è un guasto.
\
Nel menu Audio 1 della schermata Setup Screen,
controllare che siano stati scelti i formati di uscita
digitale appropriati. e che [Digital Out] non sia su
[Off] (pagina 26).
Attenzione
L’elettricità statica ed altre influenze esterne possono
causare un funzionamento anormale di quest’unità. In
questo caso, scollegare il cavo di alimentazione e
ricollegarlo per ristabilire il funzionamento ordinario
dell’unità. Se ciò non risolve il problema, consultare il
più vicino centro assistenza PIONEER.
Se registrata su videoregistratore o passata per un
selettore video, l’im m agine è disturbata.
A causa della presenza di circuiti antiduplicazione in
questo lettore, la copia di materiale video da un disco
ad un videoregistratore o attraverso un selettore AV
può impedire la registrazione o causare la presenza di
rumore nell’immagine.
\
Questo non è un guasto.
L’uso del telecom ando è im possibile.
La presa di ingresso di telecomando del pannello
posteriore del lettore è in uso.
\
Puntare il telecomando verso il componente cui il
lettore è collegato (pagina 15).
Il telecomando è troppo lontano dal lettore o l’angolo
col sensore di telecomando è troppo grande.
\
Usare il telecomando da una distanza entro il suo
raggio di azione (pagina 6).
Le batteria sono esaurite.
Sostituirle con altre nuove (pagina 6).
\
Il segnale audio non viene prodotto oppure è distorto.
L’impostazione [96 kHz PCM Out] del menu Audio 1
della schermata Setup si trova su [96 kHz].
\
Collegarsi attraverso le uscite audio o impostare
[96 kHz PCM Out] nel menu Audio 1 su [96 kHz
3 48 kHz] (pagine 13 e 25).
Il disco è sporco.
Consultare la sezione ‘Cura Dei Dischi’ (pagina 48).
\
Gli spinotti di collegamento non sono bene inseriti nei
terminali o non sono affatto collegati.
\
Controllare che tutti gli spinotti siano ben collegati.
Lo spinotto o il terminale è sporco.
\
Controllare che tutti gli spinotti ed i terminali siano
ben puliti, ecc.
Collegamento dei cavi audio scorretto.
\
Controllare che i cavi audio siano collegati
correttamente (pagina 13).
I collegamenti vengono fatti col terminale di ingresso
PHONO dell’amplificatore.
\
Usare qualsiasi terminale che non sia quello PHONO.
Il modo di pausa viene attivato.
\
Premere il pulsante PLAY 3 o quello PAUSE 8
per abbandonare il modo di pausa.
L’uso dell’amplificatore stereo è scorretto.
\
Controllare il selettore d’ingresso (CD, AUX ecc.)
per determinare se è stato scelto per la
riproduzione di DVD.
Il DVD o CD è registrato nel modo DTS audio.
\
Il segnale del sistema DTS audio viene emesso
solo dalle prese di uscita digitale. Collegare l’uscita
digitale del lettore all’ingresso digitale di un
sintoamplificatore o amplificatore con
decodificatore DTS incorporato per così riprodurre
correttamente tale segnale.
52
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Sistem a DTS
Terminologia
L’acronimo DTS sta per Digital Theater System. DTS è
un sistema di circondamento differente da quello Dolby
Digital ed è diventato popolare per film. Per poterne fare
uso, la presa di uscita digitale coassiale o ottica di questo
lettore deve venire collegata ad un amplificatore AV o
decodificatore DTS perché il segnale sia
decodificato. Il segnale audio DTS non viene
emesso affatto dalle prese di uscita
analogiche.
Proporzioni dello scherm o
Le proporzioni dello schermo sono il rapporto fra la sua
larghezza e la sua altezza. Uno schermo televisivo
standard ha un rapporto lunghezza - altezza pari a 4:3,
mentre quello di un televisore ad alta definizione è pari a
16:9. Quest’ultimo permette quindi di visualizzare
un’immagine più larga.
Num ero di capitolo
Gam m a dinam ica
I numeri di capitoli vengono assegnati a contrassegnare
le varie sezioni di un titolo in un disco, in modo simile alla
numerazione dei capitoli di un libro. Se un disco include
numeri di capitolo, le sezioni cercate possono venire
trovate facilmente con le funzioni di ricerca e di altro tipo.
La gamma dinamica consiste nella differenza fra il suono
più debole e quello più forte di una colonna sonora,
misurati in decibel (dB).
Comprimendo la gamma dinamica si aumenta il livello
del segnale più debole e abbassa quello del segnale più
forte. Ciò rende i dialoghi ed altri suoni di basso volume
più chiari, mentre abbassa quelli forti, ad esempio
esplosioni.
Mem oria condizioni
Il termine [condizioni] si riferisce alle varie impostazioni
del lettore fatte, ad esempio durante la riproduzione, e
memorizzate. Questa funzione permette di riprodurre un
disco ogni volta esattamente nel modo voluto.
MPEG
Abbreviazione di Moving Picture Expert Group, uno
standard internazionale di compressione per suoni ed
immagini in movimento. Con alcuni DVD, il segnale audio
digitale è stato compresso con questo formato.
Segnale digitale
Il segnale digitale non consiste del segnale audio, ma
piuttosto di dati digitali che, una volta convertiti,
divengono il segnale audio. Il lettore emette segnali
digitali via prese ottiche o coassiali. Se essi non possono
poi venire decodificati dall’amplificatore AV collegato,
viene prodotto rumore digitale. I formati digitali
compatibili con vari sistemi di riproduzione possono
venire scelti con la schermata Setup, menu Audio 1.
Riprese m ulti angolazione
Quando si guarda un filmato, esso è chiaramente una
scena vista attraverso una videocamera. Per questo, una
scena viene inevitabilmente mostrata dal punto di vista
di una sola telecamera. In uno studio cinematografico,
però, essa viene ripresa da più telecamere, ed una delle
riprese viene scelta dal regista per il film. Se tutte
venissero scelte, potreste scegliere quella che volete.
Alcuni DVD vi danno appunto questa possibilità. Questi
dischi sono chiamati [dischi multi angolazione].
Uscita digitale (Coassiale)
L’uscita del segnale digitale audio è collegata ad un cavo
audio coassiale. Dato che il segnale trasmesso è digitale,
i collegamenti devono venire sempre fatti con una presa
digitale di un altro componente. Se si collega questa
presa ad un ingresso analogico, si genera del rumore
perché il segnale non può venire decodificato.
Livello di blocco della visione
Questa funzione è stata richiesta da genitori desiderosi
di non far vedere ai figli certo materiale video da loro
usato. Alcuni dischi permettono un controllo articolato
attraverso parole d’ordine della visione.
Uscita digitale (Ottica) (solo DV-535)
Normalmente, l’audio viene convertito in un segnale
elettrico e trasmesso da un cavo elettrico dal lettore
all’amplificatore o altro componente. L’uso di un segnale
digitale emesso da una presa collegata ad un cavo
coassiale o a fibre ottiche è una [uscita digitale ottica].
Analogamente, un ingresso digitale ottico riceve segnali
digitali da unità esterne, ad esempio un amplificatore o
sintoamplificatore AV.
PCM
L’acronimo PCM sta per Pulse Code Modulation e
definisce un tipo di segnale digitale audio. L’audio digitale
di un CD è PCM. Questo lettore possieda anche una
funzione che permette di convertire segnali Dolby Digital
e MPEG in PCM per permetterne la riproduzione anche
senza uno speciale decodificatore.
Sistem a Dolby Digital
Sistem a PBC (Playback Control)
5.1 canali (cinque canali più uno) audio usati dal sistema
di circondamento Digital Surround in cinema consiste di
dati digitali compressi da un algoritmo di terza
generazione del codificatore.
Questo acronimo s riferisce a segnali registrati su Video
CD di versione 2,0 che permettono di controllare la
riproduzione.
Si possono usare menu registrati sul disco con il sistema
PBC per ricercare in modo facile ed interattivo scene
particolare e riprodurle.
1
Per poter riprodurre correttamente i dischi Dolby Digital,
le prese digitali di quest’unità (coassiali o ottiche) devono
venire collegate alla presa digitale di ingresso
Si può anche ottenere immagini ferme di alta normale
risoluzione.
dell’amplificatore AV o decodificatore Dolby Digital.
53
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Codici restrittivi (codici regionali)
Controllo di sistem a
I codici restrittivi regionali sono incorporati sia nel lettore
che nei dischi DVD. Perché la riproduzione sia possibile,
essi devono coincidere.
Se si collega questo lettore attraverso un cavo di
controllo di sistema ad un altro componente Pioneer, ad
esempio un sintoamplificatore o amplificatore che porti il
marchio Î, si può controllare il lettore come se fosse un
componente di un sistema integrato. Per controllarlo,
quindi, puntare il telecomando del lettore sul sensore di
telecomando del componente cui il lettore stesso è
collegato e non su quello del lettore.
Il codice regionale può venire trovato sul panello
posteriore del lettore per DVD. L’illustrazione che segue
mostra le regioni ed i numeri regionali corrispondenti.
Indicazione del tem po
L’indicazione del tempo dice quanto tempo è trascorso
dall’inizio della riproduzione di un disco. Se si usa la
funzione di ricerca a tempo, si può usare l’indicazione del
tempo per trovare scene in un certo punto del disco.
Num ero del titolo
I dischi DVD sono divisi in unità chiamate titolo, e
ciascun titolo è a sua volta diviso in capitoli. Le
schermate dei menu non appartengono ad alcun titolo.
Un disco che contiene un film può consistere di un solo
titolo suddiviso in più o nessun capitolo. I dischi karaoke
invece possono avere molti titoli, ciascuno consistente di
una canzone.
Frequenza di cam pionam ento
Se un’onda sonora viene convertita in segnale digitale, il
suono viene campionato e convertito in dati di una certa
frequenza. Ad esempio, una frequenza di 96 kHz indica
che il segnale analogico è stato campionato 96.000 volte
al secondo per produrre il segnale digitale.
Sottotitoli
I sottotitoli sono trascrizioni dei dialoghi di un film o video
che appaiono sullo schermo. Un DVD può contenere
sottotitoli in sino a 32 lingue. La funzione di
sottotitolazione può venire usata per scegliere la lingua
desiderata.
Term inale S-Video
Collegando un’uscita S-Video del lettore ad un televisore
o monitor dotato di ingresso S-Video attraverso un cavo
S-Video si riproduce l’immagine in modo più chiaro
perché le varie componenti di luminanza e colore
vengono trasmesse separatamente. Questi segnali sono
quindi ricombinati nel televisore e riprodotti.
54
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Dati tecnici
Generali
Uscita audio
Sistema ............................... DVD e audio digitale per CD
Alimentazione .................. A c.a. a 220 – 240 V, 50/60 Hz
Consumo ................................................................. 12 W
Consumo nel modo di attesa ...................... meno di 1 W
Peso ....................................................................... 2,7 kg
Dimensioni
Livello di uscita
Audio .................................... 200 mVrms (1 kHz, –20 dB)
Numero di canali ............................................................ 2
Prese ........................................................................ RCA
Caratteristiche audio digitale
Risposta in frequenza ............................ da 4 Hz a 44 kHz
(freq. campionamento DVD: 96 kHz)
DV-535 ............. 420 x 281 x 104 (L x P x A) mm, senza
protrusioni
Rapporto S/R ................................................ oltre 115 dB
Gamma dinamica ......................................... oltre 102 dB
Distorsione armonica complessiva .................... 0,002 %
Wow e flutter ............................................ Non misurabili
(±0,001% a vattaggio di picco)
DV-530 ............. 420 x 278 x 104 (L x P x A) mm, senza
protrusioni
Temperatura di lavoro .............................. Da 5°C a 35° C
Umidità di lavoro ... Dal 5% all’85% di U.R:, senza condensa
Uscite S-Video
Uscite digitali
Y (luminanza) – livello di uscita ............... 1 Vp-p (75 ohm)
C (colore) – livello di uscita .............. 286 mVp-p (75 ohm)
Prese ................................................................... S-Video
Uscita digitale ottica (solo DV-535) .. Presa digitale ottica
Uscita digitale coassiale ................................. Presa RCA
Altri term inali
Uscite video
CONTROL IN ............................... Mini jack (3,5 di diam.)
Livello di uscita ....................................... 1 Vp-p (75 ohm)
Prese ........................................................................ RCA
Ingressi/uscite AV ....................... connettore a 21 piedini
Accessori
Questo connettore fornisce i segnali audio e video ad
un televisore o monitor a colori compatibile.
Cavo audio ..................................................................... 1
Cavo video ..................................................................... 1
Cavo di alimentazione .................................................... 1
Telecomando ................................................................. 1
Batterie a secco AA (R6P) .............................................. 2
Istruzioni per l’uso .......................................................... 1
Assegnazione piedini connettore a 21 piedini
20 18 16 14 12 10 8 6 4 2
21 19 17 15 13 11 9 7 5 3 1
Nota
Il design ed i dati tecnici di questo prodotto sono soggetti a
modifiche senza preavviso.
PIEDINO No.
1
3
4
7
8
Audio 2/uscita audio destra 11 G uscita
Audio 1/uscita audio sinistra 15 R o C uscita
Terra
17 Terra
B uscita
Status
19 Uscita video
o Y uscita
21 Terra
Pubblicato da Pioneer Corporation.
Copyright © 2000 Pioneer Corporation.
Tutti i diritti riservati.
55
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Published by Pioneer Corporation.
Copyright © 2000 Pioneer Corporation.
All rights reserved.
PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS [USA] INC.
PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: [03] 9586-6300
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A.
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
San Lorenzo 1009 3er Piso Desp. 302 Col. Del Valle Mexico D.F. C.P.
03100 TEL: 5-688-52-90
<00F00ZW0J01>
Printed in
Download from Www.Somanuals.com. All Manuals Search And Download.
<VRD1115-A>
|