Operating Instructions
Blu-ray Disc PLAYER
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
The following caution label appears on your unit.
Location: inside of the unit
This product is a class 1 laser product, but this
product contains a laser diode higher than Class 1.
To ensure continued safety, do not remove any covers
or attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
D3-4-2-1-8_B_En
Operating Environment
ꢀꢁꢂꢃꢄꢃꢅ
ꢀ#ꢁ$ꢂ&ꢃ!ꢄꢀꢁ!(ꢃ$"! ꢁ!&ꢀ&ꢁ #ꢁ$ꢂ&'$ꢁꢀꢂ!ꢅꢀꢆ' ꢃꢅꢃ&*ꢇ
ꢈꢉꢀ+ꢊꢀ&"ꢀꢈꢋꢉꢀ+ꢊꢀꢌꢈ ꢍꢀ+ꢎꢀ&"ꢀꢈꢏꢉꢀ+ꢎꢐꢑꢀꢒꢁ%%ꢀ&ꢆꢂ!ꢀꢓꢉꢀꢔꢕꢖꢀ
ꢌꢗ""ꢒꢃ!ꢄꢀ(ꢁ!&%ꢀ!"&ꢀꢘꢒ"ꢗꢙꢁꢅꢐ
ꢆ"ꢇ#%ꢈ)ꢈ!'ꢇꢉꢇꢊꢋ%ꢈꢇꢌꢉ+ꢉ%ꢍꢎꢇꢍ"ꢇ!"'ꢇ#ꢏꢉꢐꢈꢇꢉ!*ꢇ!ꢉꢑꢈꢍꢇ
ꢊꢏꢉ ꢈꢇ&"(%ꢐꢈ&ꢇꢒ&(ꢐꢌꢇꢉ&ꢇꢉꢇꢏꢋꢓꢌ'ꢈꢍꢇꢐꢉ!ꢍꢏꢈꢔꢇ"!ꢇ'ꢌꢈꢇ
ꢈ$(ꢋ# ꢈ!'ꢕꢇ ꢇ ꢇ
ꢖ
ꢗꢘꢗꢙꢗꢚꢗꢛꢉꢜꢁꢜꢝ!
ꢚ"ꢀ!"&ꢀꢃ!%&ꢂꢒꢒꢀ&ꢆꢃ%ꢀ'!ꢃ&ꢀꢃ!ꢀꢂꢀ#""$ꢒ*ꢀ(ꢁ!&ꢃꢒꢂ&ꢁꢅꢀꢂ$ꢁꢂꢛꢀ"$ꢀꢃ!ꢀ
ꢒ"ꢗꢂ&ꢃ"!%ꢀꢁ)#"%ꢁꢅꢀ&"ꢀꢆꢃꢄꢆꢀꢆ' ꢃꢅꢃ&*ꢀ"$ꢀꢅꢃ$ꢁꢗ&ꢀ%'!ꢒꢃꢄꢆ&ꢀꢌ"$ꢀ
%&$"!ꢄꢀꢂ$&ꢃꢜꢃꢗꢃꢂꢒꢀꢒꢃꢄꢆ&ꢐ
D3-4-2-1-7c_A_En
WARNING
This equipment is not waterproof. To prevent a fire
or shock hazard, do not place any container filled
with liquid near this equipment (such as a vase or
flower pot) or expose it to dripping, splashing, rain
ꢀꢁꢂꢃꢄꢅꢆꢃꢄꢇꢂꢇꢈꢆꢉꢃꢄꢇꢂ
ꢊ$!)ꢇ%)./ꢋ''%)#ꢇ/$%.ꢇ0)%/ꢎꢇ(ꢋ&!ꢇ.0-!ꢇ/*ꢇ'!ꢋ1!ꢇ.+ꢋꢌ!ꢇ
ꢋ-*0) ꢇ/$!ꢇ0)%/ꢇ"*-ꢇ1!)/%'ꢋ/%*)ꢇ/*ꢇ%(+-*1!ꢇ$!ꢋ/ꢇ
-ꢋ %ꢋ/%*)ꢇꢒꢋ/ꢇ'!ꢋ./ꢇꢍꢎꢇꢌ(ꢇꢋ/ꢇ/*+ꢎꢇꢍꢎꢇꢌ(ꢇꢋ/ꢇ-!ꢋ-ꢎꢇꢋ) ꢇ
ꢍꢎꢇꢌ(ꢇꢋ/ꢇ!ꢋꢌ$ꢇ.% !ꢔꢕ
or moisture.
D3-4-2-1-3_B_En
ꢊꢆꢏꢂꢄꢂꢐ
ꢀꢁꢁꢂꢃꢂꢄꢇ
ꢑ'*/.ꢇꢋ) ꢇ*+!)%)#.ꢇ%)ꢇ/$!ꢇꢌꢋꢒ%)!/ꢇꢋ-!ꢇ+-*1% ! ꢇ"*-ꢇ
1!)/%'ꢋ/%*)ꢇ/*ꢇ!).0-!ꢇ-!'%ꢋꢒ'!ꢇ*+!-ꢋ/%*)ꢇ*"ꢇ/$!ꢇ
+-* 0ꢌ/ꢎꢇꢋ) ꢇ/*ꢇ+-*/!ꢌ/ꢇ%/ꢇ"-*(ꢇ*1!-$!ꢋ/%)#ꢕꢇꢃ*ꢇ
+-!1!)/ꢇ"%-!ꢇ$ꢋ4ꢋ- ꢎꢇ/$!ꢇ*+!)%)#.ꢇ.$*0' ꢇ)!1!-ꢇꢒ!ꢇ
ꢒ'*ꢌ&! ꢇ*-ꢇꢌ*1!-! ꢇ2%/$ꢇ%/!(.ꢇꢒ.0ꢌ$ꢇꢋ.ꢇ)!2.+ꢋ+!-.ꢎꢇ
/ꢋꢒ'!ꢗꢌ'*/$.ꢎꢇꢌ0-/ꢋ%).ꢔꢇ*-ꢇꢒ3ꢇ*+!-ꢋ/%)#ꢇ/$!ꢇ
ꢌꢀ ꢁꢂꢀꢀꢃꢄꢅꢆꢆꢇꢈꢆꢀꢇꢈꢀ ꢁꢂꢀꢉꢊꢀꢀ ꢇꢂꢋꢉꢀꢉꢇꢌꢀꢍꢀꢂꢀꢎꢏꢀꢉꢊꢀꢀ ꢁꢄꢄꢁꢐꢇꢈꢆꢀ
ꢀꢋꢀꢑꢉꢇꢁꢈꢀꢑꢎꢂꢀ ꢅꢄꢄꢒꢓ
ꢅꢆꢇꢇ+$!)ꢈꢉꢇꢇ$ꢊꢇ)ꢆꢇꢇꢈ+ꢈ !ꢈꢋ!ꢇꢇ%$,ꢇ'ꢇ(*%%!-ꢇꢌ ꢊꢊꢇ'(ꢇ
ꢈꢍꢍ$'ꢌ #ꢉꢇ)$ꢇꢍ$*#)'-ꢇ$'ꢇ'ꢇꢉ $#ꢕꢇꢎꢇꢇ(*'ꢇꢇ)ꢆꢈ)ꢇ)ꢆꢇꢇ
%$,ꢇ'ꢇ(*%%!-ꢇ+$!)ꢈꢉꢇꢇ$ꢊꢇ)ꢆꢇꢇꢈ'ꢇꢈꢇ,ꢆꢇ'ꢇꢇ)ꢆ (ꢇ*# )ꢇ
, !!ꢇꢋꢇꢇ*(ꢇꢌꢇ"ꢇꢇ)(ꢇ)ꢆꢇꢇ'ꢇ&* 'ꢇꢌꢇ+$!)ꢈꢉꢇꢇꢒꢇꢕꢉꢕꢎꢇ ꢏꢐꢇꢑꢇ
3
En
!,0%+(!)/ꢇ*)ꢇ/$%ꢌ&ꢇꢌꢋ-+!/ꢇ*-ꢇꢋꢇꢒ! ꢕ
ꢇ
ꢓꢔꢗꢕꢗ ꢗꢍꢗꢖꢒꢗꢆꢗꢁ)
$'ꢇꢒ ꢐꢇꢑꢔꢇ,' ))ꢇ#ꢇ$#ꢇ)ꢆꢇꢇ'ꢇꢈ'ꢇ%ꢈ#ꢇ!ꢕꢇ
ꢓꢏꢗꢔꢗ ꢗꢒꢗꢔꢕꢁꢕꢖ#
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢚꢀꢛꢁꢑꢀꢀꢁꢀꢂꢃ ꢄꢀꢅꢆꢀꢇꢈꢉꢊꢀ ꢋꢉꢇꢀꢌꢅꢍꢊꢀꢋꢅꢇꢀꢎꢏꢇꢐꢈꢀꢇꢈꢍꢀꢀꢁꢀ
ꢅ ꢇꢃꢍꢇꢀ$ꢅ ꢀ"ꢏꢋꢇꢀꢇꢅꢀ ꢊꢍꢑꢀꢇꢈꢍꢀꢂꢃ ꢄꢀꢎ ꢊꢇꢀꢒꢍꢀꢓꢍꢎꢅ!ꢍꢌꢀ
ꢏꢋꢌꢀꢏꢂꢂꢓꢅꢂꢓꢉꢏꢇꢍꢀꢅꢋꢍꢀꢆꢉꢇꢇꢍꢌꢔꢀꢕꢍꢂꢃꢏꢐꢍꢎꢍꢋꢇꢀꢏꢋꢌꢀ
ꢎꢅ ꢋꢇꢉꢋꢄꢀꢅꢆꢀꢏꢋꢀꢀꢁꢀꢂꢃ ꢄꢀꢅꢋꢀꢇꢈꢍꢀꢂꢅ"ꢍꢓꢀꢊ ꢂꢂꢃ$ꢀꢐꢅꢓꢌꢀꢅꢆꢀ
ꢇꢈꢉꢊꢀ ꢋꢉꢇꢀꢊꢈꢅ ꢃꢌꢀꢒꢍꢀꢂꢍꢓꢆꢅꢓꢎꢍꢌꢀꢅꢋꢃ$ꢀꢒ$ꢀꢖ ꢏꢃꢉꢆꢉꢍꢌꢀ
ꢊꢍꢓ!ꢉꢐꢍꢀꢂꢍꢓꢊꢅꢋꢋꢍꢃꢔꢀ ꢆꢀꢐꢅꢋꢋꢍꢐꢇꢍꢌꢀꢇꢅꢀꢏꢋꢀꢀꢁꢀꢅ ꢇꢃꢍꢇꢑꢀꢇꢈꢍꢀ
ꢐ ꢇꢗꢅꢆꢆꢀꢂꢃ ꢄꢀꢐꢏꢋꢀꢐꢏ ꢊꢍꢀꢊꢍ!ꢍꢓꢍꢀꢍꢃꢍꢐꢇꢓꢉꢐꢏꢃꢀꢊꢈꢅꢐꢘꢔꢀꢙꢏꢘꢍꢀ
ꢊ ꢓꢍꢀꢉꢇꢀꢉꢊꢀꢂꢓꢅꢂꢍꢓꢃ$ꢀꢌꢉꢊꢂꢅꢊꢍꢌꢀꢅꢆꢀꢏꢆꢇꢍꢓꢀꢓꢍꢎꢅ!ꢏꢃꢔ
ꢀꢁꢂꢃꢀꢄꢅꢆꢇꢈꢉꢊꢀꢂꢃꢀꢋꢆꢅꢀꢌꢍꢎꢍꢅꢏꢐꢀꢁꢆꢈꢃꢍꢁꢆꢐꢇꢀꢄꢈꢅꢄꢆꢃꢍꢃꢑꢀꢒꢎꢓꢀ
ꢋꢏꢂꢐꢈꢅꢍꢀꢇꢈꢍꢀꢊꢆꢀꢈꢃꢍꢀꢋꢆꢅꢀꢆꢊꢁꢍꢅꢀꢊꢁꢏꢎꢀꢁꢆꢈꢃꢍꢁꢆꢐꢇꢀꢄꢈꢅꢄꢆꢃꢍꢃꢀ
ꢔꢃꢈꢉꢁꢀꢏꢃꢀꢐꢆꢎꢌꢕꢊꢍꢅꢖꢀꢈꢃꢍꢀꢋꢆꢅꢀ ꢈꢃꢂꢎꢍꢃꢃꢀꢄꢈꢅꢄꢆꢃꢍꢃꢀꢂꢎꢀꢏꢀ
ꢅꢍꢃꢊꢏꢈꢅꢏꢎꢊꢀꢆꢅꢀꢈꢃꢍꢀꢂꢎꢀꢏꢀꢉꢏꢅꢀꢆꢅꢀꢃꢁꢂꢄꢗꢀꢏꢎꢇꢀꢘꢁꢂꢉꢁꢀ
ꢅꢍꢙꢈꢂꢅꢍꢃꢀꢅꢍꢄꢏꢂꢅꢀꢘꢂꢐꢐꢀ ꢍꢀꢉꢁꢏꢅꢌꢍꢇꢀꢋꢆꢅꢀꢍꢚꢍꢎꢀꢇꢈꢅꢂꢎꢌꢀꢊꢁꢍꢀ
ꢘꢏꢅꢅꢏꢎꢊꢓꢀꢄꢍꢅꢂꢆꢇꢑꢀ
ꢀꢁꢂꢃꢄꢅꢆ
ꢀ ꢁꢂꢃꢄꢅ ꢃꢆꢇꢅꢇꢈꢉꢊ ꢋ
ꢚꢈꢍꢀꢍꢖ ꢉꢂꢎꢍꢋꢇꢀꢊꢈꢅ ꢃꢌꢀꢒꢍꢀꢌꢉꢊꢐꢅꢋꢋꢍꢐꢇꢍꢌꢀꢒ$ꢀꢓꢍꢎꢅ!ꢉꢋꢄꢀ
ꢇꢈꢍꢀꢎꢏꢉꢋꢊꢀꢂꢃ ꢄꢀꢆꢓꢅꢎꢀꢇꢈꢍꢀ"ꢏꢃꢃꢀꢊꢅꢐꢘꢍꢇꢀ"ꢈꢍꢋꢀꢃꢍꢆꢇꢀ
ꢋ ꢊꢍꢌꢀꢆꢅꢓꢀꢏꢀꢃꢅꢋꢄꢀꢂꢍꢓꢉꢅꢌꢀꢅꢆꢀꢇꢉꢎꢍꢀꢛꢆꢅꢓꢀꢍ#ꢏꢎꢂꢃꢍꢑꢀ"ꢈꢍꢋꢀ
ꢀꢁꢂꢃꢄꢅꢀꢆꢇꢅꢀꢈꢉ ꢅꢊꢀꢋꢉꢊꢃꢀꢌ!ꢀꢆꢇꢅꢀꢈꢄꢍꢎꢏꢀꢒꢉꢀꢂꢉꢆꢀꢈꢍꢄꢄꢀꢉꢍꢆꢀꢆꢇꢅꢀ
ꢈꢄꢍꢎꢀꢌ!ꢀꢆꢍꢎꢎꢐꢂꢎꢀꢆꢇꢅꢀꢋꢉꢊꢃꢀꢁꢂꢃꢀꢂꢅꢑꢅꢊꢀꢆꢉꢍꢋꢇꢀꢆꢇꢅꢀꢈꢉ ꢅꢊꢀ
ꢋꢉꢊꢃꢀ ꢇꢅꢂꢀ!ꢉꢍꢊꢀꢇꢁꢂꢃꢒꢀꢁꢊꢅꢀ ꢅꢆꢀꢁꢒꢀꢆꢇꢐꢒꢀꢋꢉꢍꢄꢃꢀꢋꢁꢍꢒꢅꢀꢁꢀ
ꢒꢇꢉꢊꢆꢀꢋꢐꢊꢋꢍꢐꢆꢀꢉꢊꢀꢅꢄꢅꢋꢆꢊꢐꢋꢀꢒꢇꢉꢋꢓꢏꢀꢒꢉꢀꢂꢉꢆꢀꢈꢄꢁꢋꢅꢀꢆꢇꢅꢀꢍꢂꢐꢆꢔꢀꢁꢀ
ꢈꢐꢅꢋꢅꢀꢉꢕꢀꢕꢍꢊꢂꢐꢆꢍꢊꢅꢔꢀꢅꢆꢋꢏꢔꢀꢉꢂꢀꢆꢇꢅꢀꢈꢉ ꢅꢊꢀꢋꢉꢊꢃꢔꢀꢉꢊꢀꢈꢐꢂꢋꢇꢀꢆꢇꢅꢀ
ꢋꢉꢊꢃꢏꢀ ꢅꢑꢅꢊꢀꢖꢁꢓꢅꢀꢁꢀꢓꢂꢉꢆꢀꢐꢂꢀꢆꢇꢅꢀꢋꢉꢊꢃꢀꢉꢊꢀꢆꢐꢅꢀꢐꢆꢀ ꢐꢆꢇꢀꢉꢆꢇꢅꢊꢀ
ꢋꢉꢊꢃꢒꢏꢀꢗꢇꢅꢀꢈꢉ ꢅꢊꢀꢋꢉꢊꢃꢒꢀꢒꢇꢉꢍꢄꢃꢀꢌꢅꢀꢊꢉꢍꢆꢅꢃꢀꢒꢍꢋꢇꢀꢆꢇꢁꢆꢀꢆꢇꢅ!ꢀ
ꢁꢊꢅꢀꢂꢉꢆꢀꢄꢐꢓꢅꢄ!ꢀꢆꢉꢀꢌꢅꢀꢒꢆꢅꢈꢈꢅꢃꢀꢉꢂꢏꢀꢘꢀꢃꢁꢖꢁꢎꢅꢃꢀꢈꢉ ꢅꢊꢀꢋꢉꢊꢃꢀ
ꢋꢁꢂꢀꢋꢁꢍꢒꢅꢀꢁꢀꢕꢐꢊꢅꢀꢉꢊꢀꢎꢐꢑꢅꢀ!ꢉꢍꢀꢁꢂꢀꢅꢄꢅꢋꢆꢊꢐꢋꢁꢄꢀꢒꢇꢉꢋꢓꢏꢀꢑꢇꢅꢋꢓꢀ
ꢆꢇꢅꢀꢈꢉ ꢅꢊꢀꢋꢉꢊꢃꢀꢉꢂꢋꢅꢀꢐꢂꢀꢁꢀ ꢇꢐꢄꢅꢏꢀꢙꢕꢀ!ꢉꢍꢀꢕꢐꢂꢃꢀꢐꢆꢀꢃꢁꢖꢁꢎꢅꢃꢔꢀ
ꢋꢉꢂꢆꢁꢋꢆꢀꢆꢇꢅꢀꢚꢐꢉꢂꢅꢅꢊꢀꢒꢅꢊꢑꢐꢋꢅꢀꢋꢅꢂꢆꢅꢊꢀꢉꢂꢀꢆꢇꢅꢀꢌꢁꢋꢓꢀꢋꢉꢑꢅꢊꢔꢀꢉꢊꢀ
!ꢉꢍꢊꢀꢃꢅꢁꢄꢅꢊꢀꢕꢉꢊꢀꢁꢀꢊꢅꢈꢄꢁꢋꢅꢖꢅꢂꢆꢏ
ꢅꢋꢀ!ꢏꢐꢏꢇꢉꢅꢋꢜꢔꢀ
ꢀ
ꢀ
ꢀꢅꢂꢁꢂꢂꢂꢂꢂꢃꢈ ꢄ ꢅꢉ
CAUTION
The ꢀꢁSTANDBY/ON switch on this unit will not
completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect
device for the unit, you will need to unplug it from
the AC outlet to shut down all power. Therefore,
make sure the unit has been installed so that the
power cord can be easily unplugged from the AC
outlet in case of an accident. To avoid fire hazard,
the power cord should also be unplugged from the
AC outlet when left unused for a long period of time
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
(for example, when on vacation).
D3-4-2-2-2a_A_En
WARNING:ꢀꢛꢏꢀꢁꢂꢃꢀꢄꢀꢅꢆꢇꢀꢈꢉꢊꢁꢀꢉꢀꢀꢅꢆꢃꢋꢀꢌꢊꢉꢁꢍꢈꢅꢀꢉꢊꢀ
ꢈꢉꢊꢁꢋꢀꢎꢋꢋꢉꢈꢃꢎꢅꢇꢁꢀꢏꢃꢅꢆꢀꢎꢈꢈꢇꢋꢋꢉꢊꢃꢇꢋꢀꢋꢉꢂꢁꢀꢏꢃꢅꢆꢀꢅꢆꢇꢀ
ꢌꢊꢉꢁꢍꢈꢅꢀꢏꢃꢂꢂꢀꢇꢐꢌꢉꢋꢇꢀꢑꢉꢍꢀꢅꢉꢀꢈꢆꢇꢒꢃꢈꢎꢂꢋꢀꢂꢃꢋꢅꢇꢁꢀꢉꢀꢀ
ꢌꢊꢉꢌꢉꢋꢃꢅꢃꢉꢀꢀꢓꢔꢀꢕꢀꢉꢏꢀꢀꢅꢉꢀꢅꢆꢇꢀꢖꢅꢎꢅꢇꢀꢉꢗꢀꢑꢎꢂꢃꢗꢉꢊꢀꢃꢎꢀꢎꢀꢁꢀ
ꢉꢅꢆꢇꢊꢀꢄꢉꢘꢇꢊꢀꢒꢇꢀꢅꢎꢂꢀꢇꢀꢅꢃꢅꢃꢇꢋꢀꢅꢉꢀꢈꢎꢍꢋꢇꢀꢈꢎꢀꢈꢇꢊꢀꢎꢀꢁꢀ
ꢃꢊꢅꢆꢀꢁꢇꢗꢇꢈꢅꢀꢉꢊꢀꢉꢅꢆꢇꢊꢀꢊꢇꢌꢊꢉꢁꢍꢈꢅꢃꢘꢇꢀꢆꢎꢊꢒꢓ
Wash hands after handling
ꢀ
D36-P4_A_En
ꢀꢁꢂꢃꢀꢄꢅꢆꢇꢈꢉꢊꢀꢉꢆꢋꢊꢌꢂꢋꢃꢀꢍꢎꢅꢉꢈꢅꢏꢐꢀꢒꢂꢃꢄꢆꢃꢌꢑꢀꢆꢒꢀꢊꢁꢂꢃꢀ
ꢍꢌꢊꢎꢅꢂꢌꢑꢀꢍꢌꢏꢀꢓꢎꢀꢅꢎꢔꢈꢑꢌꢊꢎꢇꢀꢇꢈꢎꢀꢊꢆꢀꢎꢋꢕꢂꢅꢆꢋꢍꢎꢋꢊꢌꢑꢀ
ꢉꢆꢋꢃꢂꢇꢎꢅꢌꢊꢂꢆꢋꢃꢐꢀꢍꢆꢅꢀꢇꢂꢃꢄꢆꢃꢌꢑꢀꢆꢅꢀꢅꢎꢉꢏꢉꢑꢂꢋꢔꢀꢂꢋꢒꢆꢅꢍꢌꢊꢂꢆꢋꢖꢀ
ꢄꢑꢎꢌꢃꢎꢀꢉꢆꢋꢊꢌꢉꢊꢀꢏꢆꢈꢅꢀꢑꢆꢉꢌꢑꢀꢌꢈꢊꢁꢆꢅꢂꢊꢂꢎꢃꢀꢆꢅꢀꢊꢁꢎꢀꢃꢑꢎꢉꢊꢅꢆꢋꢂꢉꢃꢀ
ꢋꢇꢈꢃꢊꢅꢂꢎꢃꢀꢗꢑꢑꢂꢌꢋꢉꢎꢀꢘꢀꢙꢙꢙꢐꢎꢂꢌꢎꢐꢆꢅꢔꢐꢀ
ꢗꢌꢘꢙꢚꢛꢀ
4
En
Download from Www.Somanuals.com. All Manuals Search And Download.
We Want You Listening For A Lifetime
Since hearing damage from loud noise is often
undetectable until it is too late, this manufacturer
and the Electronic Industries Association’s
Consumer Electronics Group recommend you avoid
prolonged exposure to excessive noise. This list of
sound levels is included for your protection.
Selecting fine audio equipment such as the unit
you’ve just purchased is only the start of your
musical enjoyment. Now it’s time to consider how
you can maximize the fun and excitement your
equipment offers. This manufacturer and the
Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that
lets the sound come through loud and clear without
annoying blaring or distortion-and, most importantly,
without affecting your sensitive hearing.
Decibel
Level Example
30 Quiet library, soft whispers
40 Living room, refrigerator, bedroom away from traffic
50 Light traffic, normal conversation, quiet office
60 Air conditioner at 20 feet, sewing machine
70 Vacuum cleaner, hair dryer, noisy restaurant
80 Average city traffic, garbage disposals, alarm clock
at two feet.
Sound can be deceiving. Over time your hearing
“comfort level” adapts to higher volumes of sound.
So what sounds “normal” can actually be loud and
harmful to your hearing. Guard against this by
setting your equipment at a safe level BEFORE your
hearing adapts.
THE FOLLOWING NOISES CAN BE DANGEROUS
UNDER CONSTANT EXPOSURE
90 Subway, motorcycle, truck traffic, lawn mower
100 Garbage truck, chain saw, pneumatic drill
120 Rock band concert in front of speakers,
thunderclap
140 Gunshot blast, jet plane
180 Rocket launching pad
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it
comfortably and clearly, and without distortion.
Information courtesy of the Deafness Research Foundation.
Once you have established a comfortable sound
level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent
hearing damage or loss in the future. After all, we
want you listening for a lifetime.
S001_En
5
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
01 Before you start
05 Adjusting audio and video
Adjusting the video. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Adjusting the Audio DRC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Putting the batteries in the remote control. . . . . . . . . . . . . . . . . . . 7
Types of discs/files that can be played. . . . . . . . . . . . . . . . . . . . . . . . 8
Playable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Playable files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
06 Advanced settings
Changing the settings (Initial Setup) . . . . . . . . . . . . . . . . . . . . . . . .39
Operating the Initial Setup screen . . . . . . . . . . . . . . . . . . . . . . . . .39
Changing to other language at language setting . . . . . . . . . . . . .43
Changing the speaker setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Adjusting the output level of the various speakers
(Channel Level). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Registering or Changing the password . . . . . . . . . . . . . . . . . . . . .44
Changing the Age Restriction for watching BD-ROMs . . . . . . . .45
Changing the Parental Lock level for watching DVDs . . . . . . . . .46
Changing the Country/Area code . . . . . . . . . . . . . . . . . . . . . . . . . .47
Changing the terminals for outputting video and audio signals
(Output Terminal Priority) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Restoring all the settings to the factory default settings . . . . . . .49
About the audio output settings . . . . . . . . . . . . . . . . . . . . . . . . . . .50
02 Connecting up
Connecting a TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connecting using a commercially available HDMI cable . . . . . . 14
Connecting using a commercially available component video
cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Connecting using the included audio cable and video cable . . . 16
Connecting an AV receiver or amplifier. . . . . . . . . . . . . . . . . . . . . . 17
Connecting using a commercially available HDMI cable . . . . . . 17
Connecting using audio cables . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Connecting using a commercially available digital audio
cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Connecting the power cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
07 Additional information
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
When connected using an HDMI cable. . . . . . . . . . . . . . . . . . . . .53
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Language Code Table and Country/Area Code Table . . . . . . . . . . .56
Language Code Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Country/Area Code Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Cautions on use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Moving the player. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Place of installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Turn the power off when not using the player . . . . . . . . . . . . . . . .58
Condensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Cleaning the player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Caution for when the unit is installed in a rack with a glass
door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Cleaning the pickup lens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Handling discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Licenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
03 Getting Started
Making settings using the Setup Navigator menu . . . . . . . . . . . . . 20
Operating the TV with the player’s remote control . . . . . . . . . . . . . 22
TV Preset code list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using the TOOLS menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Erasing the additional data from BD-ROMs . . . . . . . . . . . . . . . . . . 24
Switching the video output terminal . . . . . . . . . . . . . . . . . . . . . . . . 24
Switching the output video resolution . . . . . . . . . . . . . . . . . . . . . . . 25
04 Playback
Playing discs or files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Forward and reverse scanning. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Playing specific titles, chapters or tracks . . . . . . . . . . . . . . . . . . . 27
Skipping content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Playing in slow motion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Step forward and step reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Switching the camera angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Switching the subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Switching the audio streams/channels . . . . . . . . . . . . . . . . . . . . 28
Switching the secondary video . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Displaying the disc information. . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Using the Play Mode functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Playing from a specific time (Time Search) . . . . . . . . . . . . . . . . . 29
Playing a specific title, chapter or track (Search) . . . . . . . . . . . . 30
Playing a specific section within a title or track repeatedly
(A-B Repeat). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Playing repeatedly (Repeat Play) . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Playing in random order (Random Play). . . . . . . . . . . . . . . . . . . . 32
About Play Mode types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Playing from the Home Media Gallery. . . . . . . . . . . . . . . . . . . . . . . 34
Playing discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Playing music files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Playing in the desired order (HMG Playlist) . . . . . . . . . . . . . . . . . 35
6
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
01
Before you start
3
Close the rear cover.
What’s in the box
Close securely (a click should be heard).
Audio cable (white/red plugs) x 1
Remote control x 1
STANDBY/ON
OPEN/CLOSE
TV CONTROL
INPUT
SELECT
CH
VOL
AUDIO SUBTITLE ANGLE FL DIMMER
Video cable (yellow plugs) x 1
Power cable x 1
CLEAR
ENTER
Caution
SECONDARY
AUDIO
VIDEO
OUTPUT
RESOLUTION
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
• Do not mix new and old batteries together.
DISPLAY POPUP MENU
MENU
• Batteries may have different voltages, even if they look similar.
Do not use different kinds of batteries together.
TOP MENU
TOOLS
ENTER
• To prevent leakage of battery fluid, remove the batteries if you do
not plan to use the remote control for a long period of time (1
month or more). If the fluid should leak, wipe it carefully off the
inside of the case, then insert new batteries.
HOME
MENU
RETURN
AA/R6 dry cell batteries x 2
PLAY
PREV
RED
PAUSE
GREEN
STOP
BLUE
NEXT
YELLOW
VIDEO ADJUST
• When disposing of used batteries, please comply with
governmental regulations or environmental public instruction’s
rules that apply in your country/area.
Warranty card
• WARNING
Do not use or store batteries in direct sunlight or other
excessively hot place, such as inside a car or near a heater. This
can cause batteries to leak, overheat, explode or catch fire. It
Operating instructions (this manual)
BD PLAYER
can also reduce the life or performance of batteries.
D3-4-2-3-3_En
Putting the batteries in the
remote control
1
Open the rear cover.
Press lightly on this
part and slide into
the direction of the
arrow.
2
Insert the batteries (AA/R6 x 2).
Insert as indicated by the / marks into the battery compartment.
Insert the negative
() side first.
7
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Types of discs/files that can be played
01
Playable discs
Discs with the logo marks below indicated on the disc label, package or jacket can be played.
Logo
Application format
Disc type
CD-DA
1
2
BDAV
DVD-Video DVD VR
BDMV
DATA-DISC
DTS-CD
BD-ROM
BD-R
BD
BD-RE
DVD-ROM
DVD-R
DVD
DVD-R DL
(Dual Layer)
DVD-RW
DVD+R
DVD+RW
CD-DA
(Music CD)
CD
CD-R
CD-RW
CD-ROM
1. Including the AVCHD format.
2. Discs on which music files are recorded
8
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Discs that cannot be played
• HD DVDs
01
• DVD Audio discs
• DVD-RAM discs
• Non-finalized DVD-R/DVD-RW/DVD+R/DVD+RW discs in the
DVD-Video format and AVCHD format
• Non-finalized Dual Layer DVD-R discs in the DVD VR format
• SACDs
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
• Video CDs
• SVCDs
This player conforms to NTSC standards. Discs for which “NTSC” is
indicated on the disc label, package or jacket can be played.
“Blu-ray Disc” and
are trademarks.
Manufactured under license under U.S. Patent #: 5,451,942;
5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide
patents issued & pending. DTS is a registered trademark and the DTS
logos, Symbol, DTS-HD and DTS-HD Advanced Digital Out are
trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.
is a trademark of DVD Format/Logo Licensing Corporation.
Note
• Some discs cannot be played, even if one of the above logo
marks is indicated.
Playing BDs
• To play 8 cm discs, set the disc in the 8 cm disc depression in
the center of the disc tray. No adapter is necessary. 8 cm BD-
ROMs cannot be played.
• BDs (BDMV) compatible with the formats below can be played.
– Blu-ray Disc Read-Only (ROM) Format Version 2
– Blu-ray Disc Recordable (R) Format Version 2
– Blu-ray Disc Rewritable (RE) Format Version 3
About audio formats
The following audio formats are supported on this player:
• Dolby TrueHD
This player supports BD-ROM Profile 1 Version 1.1.
BONUSVIEW Functions such as playback of secondary video
(Picture-in-Picture) and secondary audio can be used. For
details on secondary video and secondary audio playback, refer
to the disc’s instructions.
• Dolby Digital Plus
• Dolby Digital
• DTS-HD Master Audio
• DTS-HD High Resolution Audio
• DTS Digital Surround
• MPEG
“BONUSVIEW” is trademark of Blu-ray Disc Association.
When a BD-ROM is played, additional data may be stored in the
player’s memory area (local storage). If the message indicating
low memory (local storage) appears, erase the BDMV data
(page 24).
• MPEG-2 AAC
• Linear PCM
To enjoy the surround sound of Dolby TrueHD, Dolby Digital Plus,
DTS-HD Master Audio and DTS-HD High Resolution Audio, it is
recommended to connect the player to an AV receiver or amplifier
compatible with these audio formats using an HDMI cable. After
loading a BD containing sound in one of these audio formats, select
the audio format on the menu screen.
• BDs (BDAV) compatible with the formats below can be played.
– Blu-ray Disc Recordable (R) Format Version 1
– Blu-ray Disc Rewritable (RE) Format Version 2
• Dual Layer BDs can be played.
See About the audio output settings on page 50 for the output
conditions of the different formats.
• Music files recorded on BDs cannot be played.
• 8 cm BD-ROMs cannot be played.
9
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing DVDs
• DVD-Video can be played.
DualDisc playback
A DualDisc is a new two-sided disc, one side of which contains DVD
content — video, audio, etc. — while the other side contains non-
DVD content such as digital audio material.
01
• DVD-R/-RW/+R/+RW discs recorded in the DVD-Video format
can be played (finalize them before playing them on this player).
The DVD side of a DualDisc will be played on this player (excluding
any DVD-Audio content).
• DVD-R/-RW discs recorded in the VR format (Video Recording
format) can be played.
The non-DVD, audio side of the disc is not compatible with this
player.
• This label indicates playback compatibility with DVD-RW discs
recorded in VR format (Video Recording format). However, for
discs recorded with a record-only-once encrypted program,
playback can only be achieved using a CPRM compatible
device.
It is possible that when loading or ejecting a DualDisc, the opposite
side to that being played will be scratched. Scratched discs may not
be playable.
For more detailed information on the DualDisc specification, please
refer to the disc manufacturer or disc retailer.
Playing discs created on computers
• DVDs recorded in the AVCHD format can be played (finalize
them before playing them on this player).
• It may not be possible to play DVD-R/-RW or CD-R/-RW discs
recorded using a personal recorder or computer. (This can be
due to various reasons, including disc properties, scratches, dirt
on the disc, dirt on the player’s lens, condensation and so on.)
• It may not be possible to play discs recorded using a computer
due to the application settings or environment. Record discs in
the proper format. For details, contact the dealer.
“AVCHD” and the “AVCHD” logo are trademarks of Matsushita
Electric Industrial Co., Ltd. and Sony Corporation.
• Music files recorded on DVD-R/-RW/+R/+RW discs can be
played. See Playable files on page 10.
Playable files
• Dual Layer DVDs can be played. However, Non-finalized Dual
Layer DVD-R discs recorded in the VR format cannot be played
(finalize them before playing them on this player).
Music files recorded on DVDs and CDs can be played.
• HD DVD, DVD Audio and DVD-RAM discs cannot be played.
Caution
About region numbers
Blu-ray Disc Player and BD-ROM or DVD-Video discs are assigned
region numbers according to the region in which they are sold.
• In DVD, only the one recorded by the ISO 9660 file system can be
played.
• Some files may not be playable.
This player’s region numbers are:
• BD-ROM: A
• For some files, it may not be possible to use certain functions
during playback.
• DVD-Video: 1
• It may not be possible to play some files, even if they have the
extension of a file playable on this player.
Discs not including these numbers cannot be played. Discs
playable on this player are as shown below.
• Files protected by DRM (Digital Rights Management) cannot be
played.
Supported music file formats
• Windows Media™ Audio 9 (WMA9)
Bit rate: Up to 192 kbps
• BDs: A (including A) and ALL
• DVDs: 1 (including 1) and ALL
Sampling frequencies: 22.05 kHz, 32 kHz, 44.1 kHz and 48 kHz
• MPEG-1 Audio Layer 3 (MP3)
Bit rate: Up to 320 kbps
Sampling frequencies: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz,
22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz and 48 kHz
Playing CDs
• Music CDs (CD-DAs and DTS-CDs) can be played.
Playable file extensions
• Music files
• Music files recorded on CDs can be played. See Playable files on
page 10.
.wma and .mp3
• Windows Media is either a registered trademark or trademark of
Microsoft Corporation in the United States and/or other countries.
• SACD, Video CD and Super VCD discs cannot be played.
• Regarding copy protected CDs: This player is designed to
conform to the specifications of the Audio CD format. This
player does not support the playback or function of discs that do
not conform to these specifications.
• This product includes technology owned by Microsoft Corporation
and cannot be used or distributed without a license from
Microsoft Licensing, Inc.
10
En
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Number buttons – Use these to select and play the title/
chapter/track you want to watch or listen to and to select items
from menus.
Part Names and Functions
01
CLEAR – Press to clear the numeric number, etc.
ENTER – Press to execute the selected item or enter a setting
that has been changed, etc.
Remote Control
6
7
SECONDARY AUDIO – When playing a BD-ROM on which
secondary audio is recorded, press to switch to the secondary
audio (page 28).
SECONDARY VIDEO – When playing a BD-ROM on which
secondary video (Picture-in-Picture) is recorded, press to switch
to the secondary video (page 29).
STANDBY/ON
OPEN/CLOSE
1
15
16
TV CONTROL
INPUT
SELECT
CH
VOL
2
3
FL DIMMER
AUDIO SUBTITLE ANGLE
VIDEO SELECT
Press to switch the terminal from which the video signals are
output. Use to switch between digital output (HDMI output) and
analog output (Component Video output, S-Video output or Video
output) (the signals are only output from the selected video
output terminal) (page 24).
4
17
5
6
8
HOME MEDIA GALLERY
CLEAR
ENTER
OUTPUT
RESOLUTION
SECONDARY
AUDIO
Press to display/hide the Home Media Gallery screen (page 34).
VIDEO
9
TOP MENU
18
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
7
8
Press to display the top menu of the BD-ROM or DVD-Video.
19
21
DISPLAY POPUP MENU
MENU
20
22
10 /// – Use to select items, change settings and move
the cursor.
TOOLS
TOP MENU
9
ENTER – Press to execute the selected item or enter a setting
that has been changed, etc.
ENTER
10
11
12
11
HOME MENU
HOME
MENU
RETURN
Press to display/hide the Home Menu.
23
PLAY
12 PLAY – Press to start playback.
PAUSE – Press to pause playback. Press again to restart
playback.
PREV
RED
PAUSE
GREEN
STOP
BLUE
NEXT
YELLOW
STOP – Press to stop playback.
13
14
VIDEO ADJUST
PREV/ NEXT – Press to skip to the beginning of the
previous/next title/chapter/track/file (page 27).
// – Press during playback to start reverse scanning.
While playback is paused, press for step reverse playback. Press
and hold while playback is paused for reverse slow motion
playback (pages 26 and 27).
// – Press during playback to start forward scanning.
While playback is paused, press for step forward playback.
Press and hold while playback is paused for forward slow
motion playback (pages 26 and 27).
BD PLAYER
13 RED/GREEN/BLUE/YELLOW
1
STANDBY/ON
Use these to navigate BD-ROM menus.
Press to turn the power on and off.
14 VIDEO ADJUST
2
TV CONTROL
Press to display/hide the Video Adjust menu (page 37).
Your TV can be controlled using the player’s remote control
(page 22).
15 OPEN/CLOSE
– Press to turn the TV’s power on and off.
INPUT SELECT – Press to switch the TV’s input.
CH +/– – Press to select the TV channel.
VOL +/– – Press to adjust the volume.
Press to open and close the disc tray.
16 FL DIMMER
Press to switch the brightness of the front panel display. The FL OFF
indicator lights when Off is selected.
17 ANGLE
3
AUDIO
Press to switch the BD-ROM or DVD-Video camera angles
(page 28).
Press to switch the audio streams/channels (page 28).
4
SUBTITLE
Press to switch the subtitles (page 28).
11
En
Download from Www.Somanuals.com. All Manuals Search And Download.
18 OUTPUT RESOLUTION
Use these to switch the output video resolution from the HDMI OUT
or COMPONENT VIDEO output terminals (page 25).
21 DISPLAY
Press to display disc information (page 29).
01
22
TOOLS
19 PLAY MODE
Press to display/hide the Play Mode screen (page 29).
Press to display/hide the TOOLS menu (page 23).
23
RETURN
20 POP UP MENU/MENU
Press to return to the previous screen.
Press to display the BD-ROM or DVD-Video menus.
Front Panel
2
3
4
5
6
7
8
9
1
10
14
13
12
11
1
STANDBY/ON
14 HD indicator
Press to turn the power on and off.
This lights when an HDMI cable is connected and video signals are
being output with a resolution of 1080/60i, 1080/60p, 1080/24p or
720/60p. It also lights when a component video cable is connected
and video signals are being output with a resolution of 1080/60i or
720/60p.
2
Remote control sensor
Point the remote control to this, then operate it within approximately
23 feet.
The player may have trouble capturing remote control signals if
there is a fluorescent light nearby. If this happens, move the player
away from the fluorescent light.
3
Front panel display
4
OPEN/CLOSE
Press to open and close the disc tray.
5
RESOLUTION
Press to switch the output video resolution from the HDMI output or
component video output terminals (page 25).
6
/
Press to skip to the beginning of the previous title/chapter/track/file.
Press and hold to start reverse scanning (pages 26 and 27).
7
/
Press to skip to the beginning of the next title/chapter/track/file.
Press and hold to start forward scanning (pages 26 and 27).
8
Press during playback to pause. Press again to restart playback.
9
Press to stop playback.
10
Press to start playback.
11 HDMI indicator
This lights when video signals from the HDMI terminal is output
(page 14).
12 Disc tray
13 FL OFF indicator
This lights when Off is selected with FL DIMMER.
12
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Display
01
1
2
3
PQLS
24HZ
50HZ
60HZ
CONTROL
6
5
4
1
4
Character display
Lights during playback.
Displays the title/chapter/track number, elapsed time, etc.
2
5 24HZ/50HZ/60HZ
Lights when playback is paused.
The frequency of the video frame or field being output lights.
6 CONTROL
3
PQLS
Lights when the PQLS function is activated (page 15).
Lights when the HDMI Control function is activated (page 15).
Rear Panel
1
2
3
4
5
SURROUND
BACK
FRONT SURROUND
CENTER
L
R
L
R
SUB WOOFER
VIDEO OUT
AUDIO OUT (2 ch)
AUDIO OUT (7.1 ch)
COMPONENT VIDEO
AC IN
DIGITAL
OUT
Y
COAXIAL
CONTROL
IN
PB
PR
VIDEO
HDMI OUT
OPTICAL
S-VIDEO
7
6
1
DIGITAL OUT (COAXIAL/OPTICAL)
Caution
Connect with the digital audio input terminal on an AV receiver or
amplifier, etc.
• Be sure to connect cables for outputting the audio and video
signals (pages 14 and 17).
2
AUDIO OUT (2 ch) terminals
• When connected via System Control, point the remote control
toward the connected component (such as an AV receiver or
amplifier). The remote will not work correctly when pointed at
this player.
Connect with the audio input terminals on a TV, AV receiver or
amplifier, etc.
3
AUDIO OUT (7.1 ch) terminals
Connect with the multi-channel (7.1- or 5.1-channel) audio input
terminals on an AV receiver or amplifier, etc.
• You cannot use System Control with components that do not
have a System Control terminal or with components
manufactured by companies other than Pioneer.
4
VIDEO OUT terminals
VIDEO – Connect with the video input terminal on a TV, AV
receiver or amplifier, etc.
S-VIDEO – Connect with the S-Video input terminal on a TV, AV
receiver or amplifier, etc.
COMPONENT VIDEO – Connect with the component video
input terminals on a TV, AV receiver or amplifier, etc.
5
AC IN
Connect the power cord here.
6
HDMI OUT terminal
Connect with an HDMI-compatible TV, AV receiver or amplifier, etc.
7
CONTROL IN terminal
Use to control this player from the remote sensor of another Pioneer
component with a CONTROL OUT terminal and bearing the
mark. Connect the CONTROL OUT of the other component to the
CONTROL IN of this player using a mini-plug cord.
13
En
Download from Www.Somanuals.com. All Manuals Search And Download.
CChoaptnern2 ecting up
02
Player’s rear panel
Connecting a TV
SURROUND
BACK
FRONT SURROUND
CENTER
L
R
L
R
SUB WOOFER
VIDEO OUT
AUDIO OUT (2 ch)
AUDIO OUT (7.1 ch)
COMPONENT VIDEO
AC IN
DIGITAL
OUT
Y
Be sure to turn off the power and unplug the power cord from the
power outlet whenever making or changing connections.
COAXIAL
CONTROL
IN
PB
PR
VIDEO
HDMI OUT
OPTICAL
S-VIDEO
Note
P
P
B
R
VIDEO
HDMI OUT
• Make the settings in the Setup Navigator menu according to the
type of cable connected (page 20).
S-VIDEO
Connecting using a commercially
available HDMI cable
It is also possible to
connect to an AV
receiver or amplifier
using an HDMI cable
(page 17).
Match the direction of
the plug to the terminal
and insert straight.
The audio and video signals can be transferred to HDMI-compatible
devices as digital signals with no loss of sound or video quality. After
connecting, make the settings at the Setup Navigator menu
according to the connected HDMI-compatible device (page 20).
To HDMI input terminal
Also refer to the operating instructions of the device being
connected.
Note
• The HDMI indicator on the player’s front panel lights when video
signals are being output from the HDMI OUT terminal.
(Depending on the connected device, in some cases it may only
light when the player is selected as the device’s input.)
TV
• 1080p video signals may not be output, depending on the HDMI
cable being used.
Direction of
signal flow
Caution
• Hold the plug when connecting and disconnecting the cable.
• Placing a load on the plug could result in faulty contact and no
video signals being output.
About HDMI
This player incorporates High-Definition Multimedia Interface
(HDMI™) technology.
The player supports Deep Color.
The conventional players can transmit a video signal with 8 bit color
depth in the YCbCr 4:4:4 or RGB formats, the players supporting
Deep Color can transmit a video signal with a color bit depth of
greater than 8 bits per color component. Subtle color gradations
can be reproduced when connected to a TV that supports Deep
Color.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
14
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio signals that can be transferred with
the player’s HDMI output terminal
• Dolby TrueHD
About HDMI Control function
02
• When the player is connected to a Pioneer Flat Panel TV or AV
system (AV receiver or amplifier, etc.), supporting the HDMI
Control function, it can be operated from the Flat Panel TV or AV
system (AV receiver or amplifier, etc.).
• Dolby Digital Plus
• Dolby Digital
• The Flat Panel TV’s input is switched automatically when
playback is started on the player or the Home Menu or the Home
Media Gallery is displayed. When the input is switched, the
playback picture, the Home Menu or the Home Media Gallery
appears on the Flat Panel TV (Auto-select function). If the Flat
Panel TV’s power is being turned off at this time, it may turn on
automatically (Simultaneous power function). When the
language information from a connected Flat Panel TV is
received, you can have the player’s on-screen display language
change automatically to that of the Flat Panel TV (Unified
language function). This function is available only when
playback is stopped and the menu screen is not displayed.
• DTS-HD Master Audio
• DTS-HD High Resolution Audio
• DTS Digital Surround
• MPEG-2 AAC
• Linear PCM
Linear PCM audio signals meeting the following conditions can
be output:
– Sampling frequency: 32 kHz to 192 kHz
– Number of channels: Up to 8 (up to 6 for a 192 kHz sampling
frequency)
• Also refer to the operating instructions of the Flat Panel TV or AV
system (AV receiver or amplifier, etc.).
For details, see About the audio output settings on page 50.
To use the HDMI Control function
• The HDMI Control function only works when outputting video
signals from the HDMI terminal.
About the HDMI high speed transmission
This player outputs 1080/60p and Deep Color video signals. If your
TV supports 1080/60p or Deep Color signals, use a High Speed
HDMI™ cable in order to take advantage of the maximum
performance the player and TV can offer. Also set HDMI High-
Speed Transmission to On (page 41).
• The HDMI Control function operates when HDMI Control is set
to On for all devices connected with HDMI cables. Once
connections and the settings of all the devices are finished, be
sure to check that the player’s picture is output to the Flat Panel
TV. (Also check after changing the connected devices and
reconnecting HDMI cables.) The HDMI Control function may not
operate properly if the player’s picture is not properly output to
the Flat Panel TV.
High Speed HDMI™ cables are tested to carry signals up to 1080p.
1080/60i, 1080/60p, 1080/24p and 720/60p video signals that are
capable of Deep Color can also be carried.
Note
• Use High Speed HDMI™ cables when using the HDMI Control
function. The HDMI Control function may not operate properly if
other HDMI cables are used.
• Set HDMI High-Speed Transmission to Off when using an
HDMI cable other than a High Speed HDMI™ cable (a Standard
HDMI™ cable).
• The function name of KURO LINK used on the web and in
catalogs is referred to as HDMI Control in the operating
instructions and on the player.
• The following restrictions apply when HDMI High-Speed
Transmission is set to Off:
– Deep Color signals are not output.
About PQLS function
– If output video resolution is set to Auto, the signals are output
with a resolution of 1080/60i, even if the TV’s preferred
resolution is 1080/60p.
The PQLS (Precision Quartz Lock System) is a transfer control
technology using the HDMI Control function. The player’s output
signals are controlled from the AV receiver or amplifier to achieve
high quality sound playback using the quartz oscillator of AV receiver
or amplifier. This eliminates the influence of the jitter generated upon
transfer which can adversely affect the sound quality.
– When the output video resolution is set to 480i or 480p, Dolby
TrueHD and DTS-HD Master Audio signals are not output as
such. They are either output as Dolby Digital or DTS Digital
Surround signals or converted into linear PCM. Also, 96 kHz
and 192 kHz multi-channel linear PCM audio signals cannot
be output. They are output as 2-channel signals (page 50).
• The PQLS function is only activated when the player is
connected to a Pioneer AV receiver or amplifier compatible with
the PQLS function via HDMI connection.
• When an HDMI cable with a built-in equalizer is connected, it
may not operate properly.
• The PQLS function is only activated when playing a music CD
(CD-DA).
• The PQLS function is activated when the player is set as follows
(page 41):
HDMI Control: On
PQLS: Auto
About HDCP
HDCP (High-bandwidth Digital Content Protection) is a copyright
protection system by which digital video signals are encrypted.
• Also refer to the operating instructions of AV receiver or
amplifier.
When connected to a DVI device
• It is not possible to connect DVI devices (computer displays,
for example) that are not compatible with HDCP.
Caution
• No audio signals are output. Connect using an audio cable
(included), etc.
• If the output video resolution is switched when playing a music
CD (CD-DA), the PQLS function does not work. This function will
work again after playback stops and restarts.
• This player is designed for connection with HDMI-compatible
devices. When connected to a DVI device, it may not operate
properly depending on the DVI device.
15
En
Download from Www.Somanuals.com. All Manuals Search And Download.
cable for 2-channel connections, a combination of the included
cable and commercially available cables for 7.1-channel
connections). It is not possible to listen to the sound from
devices connected with HDMI cables (commercially available).
Connecting using a commercially
available component video cable
02
Player’s rear panel
Connecting using the included
audio cable and video cable
SURROUND
BACK
FRONT SURROUND
CENTER
L
R
L
R
SUB WOOFER
VIDEO OUT
AUDIO OUT (2 ch)
AUDIO OUT (7.1 ch)
COMPONENT VIDEO
AC IN
DIGITAL
OUT
Y
CO
CONTRO
I
PB
PR
VIDEO
HDMI OUT
OPTICAL
S-VIDEO
Player’s rear panel
SURROUND
BACK
FRONT SURROUND
CENTER
L
SURROUND
BACK
R
L
R
FRONT
CENTER
SURROUND
SUB WOOFER
VIDEO OUT
AUDIO OUT (2 ch)
AUDIO OUT (7.1 ch)
COMPONENT VIDEO
AC IN
DIGITAL
OUT
Y
CAXIAL
L
CONT
PB
PR
VIDEO
HDMI OUT
OPTICAL
L
S-VIDO
R
R
SUB WOOFER
VIDEO OUT
SURROUND
BACK
AUDIO OUT (2 ch)
AUDIO OUT (7.1 ch)
FRONT
CENTER
SURROUND
COMPONENT VIDEO
DIGITAL
OUT
L
Y
COAXIAL
L
R
L
R
PB
PR
VIDEO
HDMI OUT
SUB WOOFER
OPTICAL
VIDEO OUT
AUDIO OUT (2 ch)
AUDIO OUT (7.1 ch)
COMPONENT VIDEO
S-VIDEO
DIGITAL
OUT
Y
COAXIAL
PB
PR
VIDEO
HDMI OUT
It is also possible to
connect to an AV
receiver or amplifier.
Connect the audio
signals using audio
cables (7.1 channels),
an optical digital audio
cable or a coaxial
digital audio cable
(page 18).
OPTICAL
S-VIDEO
It is also possible to
connect to an AV
receiver or amplifier.
Connect the audio
signals using audio
cables (7.1 channels),
an optical digital audio
cable or a coaxial
digital audio cable
(page 18).
To audio input
terminals
To component video input
terminals
To video input
terminal
To S-Video input
terminal
To audio input
terminals
TV
Direction of
signal flow
TV
Caution
• When connected to the TV using a component video cable
(commercially available), video signals are not output with a
resolution of 1080/60p or 1080/24p.
Direction of
signal flow
• Depending on the output video resolution setting, the picture
may not be output (page 25).
• When connected to the TV using component video cables, also
connect using either an optical digital audio cable
(commercially available), a coaxial digital audio cable
(commercially available), or audio cables (use the included
16
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting using a commercially
available HDMI cable
Caution
02
• Video signals are only output with a resolution of 480/60i when
connected using a video cable (included) or an S-Video cable
(commercially available).
• When connected to a TV using a video cable or an S-Video cable,
also connect using either audio cables (use the included cable
for 2-channel connections, a combination of the included cable
and commercially available cables for 7.1-channel connections),
an optical digital audio cable (commercially available), or a
coaxial digital audio cable (commercially available). It is not
possible to listen to the sound from devices connected with
HDMI cables (commercially available).
Caution
• When connected to an AV receiver or amplifier using an HDMI
cable (commercially available), use another HDMI cable
(commercially available) to connect the AV receiver or amplifier
with the TV. If a component video cable (commercially
available), an S-Video cable (commercially available) or a video
cable (included) is connected to watch the picture, it is not
possible to listen to the sound of devices connected with HDMI
cables.
• Connect the player’s video output directly to your TV.
This player supports analog copy protection technology.
Therefore the picture may not be displayed properly if connected
to a TV via a DVD recorder/video deck or when playing the
player’s output material that is recorded by a DVD recorder/
video deck. Furthermore, the picture may not be displayed
properly due to the copy protection when the player is connected
to a TV with a built-in video deck. For details, contact the
manufacturer of your TV.
• When DTS-HD Master Audio and DTS-HD High Resolution
Audio signals are output as linear PCM signals, the DTS Digital
Surround signals are converted to linear PCM for output
(page 50).
Player’s rear panel
SURROUND
BACK
FRONT SURROUND
CENTER
L
R
L
R
SUB WOOFER
VIDEO OUT
AUDIO OUT (2 ch)
AUDIO OUT (7.1 ch)
COMPONENT VIDEO
AC IN
DIGITAL
OUT
Y
COAXIAL
CONTROL
IN
PB
PR
VIDEO
HDMI OUT
Connecting an AV receiver
or amplifier
OPTICAL
S-VIDEO
PB
PR
VIDEO
HDMI OUT
Connect to an AV receiver or amplifier in order to enjoy the surround
sound of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD
Master Audio, DTS-HD High Resolution Audio or DTS Digital
Surround. For instructions on connecting the TV and speakers to the
AV receiver or amplifier, refer to the operating instructions of AV
receiver or amplifier.
S-VIDEO
Match the direction of
the plug to the terminal
and insert straight.
Note
• Make the settings in the Setup Navigator menu according to the
type of cable connected (page 20).
AV receiver or amplifier
To HDMI input terminal
• To output video signals from this player, connect using one of
the following (not including when connected using an HDMI
cable): a component video cable (commercially available), an S-
Video cable (commercially available) or a video cable (included).
From HDMI output terminal
To HDMI input terminal
TV
Direction of
signal flow
17
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting using audio cables
Connecting using a commercially
available digital audio cable
02
Caution
Connect either an optical digital audio cable or a coaxial digital
audio cable.
• For DTS-HD Master Audio and DTS-HD High Resolution Audio
signals, the DTS Digital Surround signals are converted to linear
PCM for output (page 50).
Player’s rear panel
SURROUND
BACK
FRONT SURROUND
CENTER
L
R
L
When connecting to a 7.1-channel compatible AV receiver or
amplifier – Connect using the included audio cable and 3
commercially available audio cables (diagram below).
R
SUB WOOFER
VIDEO OUT
AUDIO OUT (2 ch)
AUDIO OUT (7.1 ch)
COMPONENT VIDEO
AC IN
DIGITAL
OUT
Y
COAXIAL
CONTROL
IN
PB
PR
VIDEO
HDMI OUT
OPTICAL
S-VIDEO
When connecting to a 5.1-channel compatible AV receiver or
amplifier – Connect using the included audio cable and 2
commercially available audio cables (do not connect to the
surround back left and right terminals).
SURROUND
FRONT
CENTER
SURROUND
BACK
L
L
R
• After connecting, set Audio Output Mode to Multi-channel
(page 40).
R
SUB WOOFER
VIDEO OUT
AUDIO OUT (2 ch)
AUDIO OUT (7.1 ch)
Player’s rear panel
COMPONENT VIDEO
DIGITAL
OUT
SURROUND
BACK
FRONT SURROUND
CENTER
Y
L
R
L
COAXIAL
R
SUB WOOFER
VIDEO OUT
AUDIO OUT (2 ch)
AUDIO OUT (7.1 ch)
COMPONENT VIDEO
AC IN
DIGITAL
OUT
L
Y
COAXIAL
PB
PR
VIDEO
CONTROL
IN
PB
PR
VIDEO
HDMI OUT
HDMI OUT
OPTICAL
S-VIDEO
OPTICAL
S-VIDEO
SURROUND
BACK
FRONT
CENTER
SURROUND
L
L
R
R
SUB WOOFER
VIDEO OUT
AUDIO OUT (2 ch)
AUDIO OUT (7.1 ch)
COMPONENT VIDEO
DIGITAL
OUT
Y
COAXIAL
L
PB
PR
VIDEO
HDMI OUT
OPTICAL
S-VIDEO
To coaxial digital
audio input
terminal
To optical digital
audio input
terminal
To component video input
terminals
AV receiver or amplifier
Direction of
signal flow
To multi-channel
audio input
To component video input
terminals
terminals
Caution
• Dolby TrueHD and Dolby Digital Plus signals are output as the
Dolby Digital signals or signals converted from Dolby Digital to
linear PCM (page 50).
AV receiver or amplifier
• DTS-HD Master Audio and DTS-HD High Resolution Audio
signals are output as the DTS Digital Surround signals or
signals converted from DTS Digital Surround to linear PCM
(page 50).
Direction of
signal flow
18
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the power
cord
02
Connect the power cord after all the connections between devices
have been completed.
Player’s rear panel
SURROUND
BACK
FRONT SURROUND
CENTER
L
R
L
R
SUB WOOFER
VIDEO OUT
AUDIO OUT (2 ch)
AUDIO OUT (7.1 ch)
COMPONENT VIDEO
AC IN
DIGITAL
OUT
Y
COAXIAL
CONTROL
IN
PB
PR
VIDEO
HDMI OUT
OPTICAL
S-VIDEO
UT
AC IN
VIDEO
S-VIDEO
Power cable (included)
To wall outlet
19
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
03
Getting Started
4
Select and set the video and audio output terminals.
Making settings using the
Setup Navigator menu
Select the actually connected video and audio output terminals.
Use /// to select, then press ENTER.
TOOLS
TOP MENU
Be sure to perform these settings when using the player for the first
time.
ENTER
HOME
MENU
RETURN
Caution
• Before turning on the power, check that the connections
between the player and other devices are correct.
Setup Navigator
BD PLAYER
1
Turn on the power.
Select the output terminals to be used for
the video and audio signals of this player.
Press STANDBY/ON.
STANDBY/ON
OPEN/CLOSE
Video
HDMI
TV CONTROL
Audio
HDMI
INPUT
SELECT
CH
VOL
Use [
press [
][
][
] to select video or audio, then
] to select the output terminal.
2
Turn on the TV’s power and switch the input.
• When HDMI is selected for Video or Audio, proceed to step 5.
See the TV’s operating instructions for instructions on operating the
TV.
• When Component Video is selected for Video, proceed to step
6.
Check that the Setup Navigator menu is displayed.
• When S-Video/Video is selected for Video, proceed to step 7.
If TV Control is set, the TV can be operated with the player’s remote
control (page 22).
Setting item
Output terminal name
HDMI
HDMI Output
If the Setup Navigator menu is not
displayed
Component Video
Video Output
Component Video
S-Video/Video
S-Video
Video
Press
HOME MENU to display the Home Menu, select
Initial Setup Setup Navigator Start, then press ENTER.
HDMI
HDMI Output
Digital Audio
Digital Audio
Output
Coaxial
Optical
3
Select the OSD language.
Use / to select, then press ENTER.
Analog Audio
Audio Output (2ch)
Audio Output (7.1ch)
TOOLS
TOP MENU
ENTER
Caution
HOME
MENU
RETURN
• When HDMI is selected for Video, no video signals are output
from the COMPONENT VIDEO, S-VIDEO or VIDEO output
terminals.
Setup Navigator
• When Component Video or S-Video/Video is selected for
Video, no video signals are output from the HDMI OUT
terminal.
BD PLAYER
Please select the on-screen display language.
• The video and audio signals output from the set output terminals
are output synchronously (lip synchronization).
• When S-Video/Video or Component Video is selected at
Video, no sound is output if HDMI is selected at Audio (the
warning message shown below is displayed).
Audio, subtitle and BDMV/DVD-Video menu
language will also be set.
Follow the procedure below to redo the connections, then select
the proper connection at the setup screen.
When you have this player connected to a Pioneer Flat Panel TV that
is compatible with HDMI Control, language settings are imported
from the Pioneer Flat Panel TV’s language settings before Setup
Navigator begins.
20
En
Download from Www.Somanuals.com. All Manuals Search And Download.
– When connecting using component video cables, an S-Video
cable or a video cable to watch the picture, connect to an AV
receiver or amplifier, or a TV using either analog audio cables
(7.1 channels or 2 channels), an optical digital audio cable or
a coaxial digital audio cable (page 18).
For details on the resolution settings, see Switching the output video
resolution on page 25.
03
7
Select the aspect ratio of your TV.
Use / to select, then press ENTER.
– When connecting the player to an AV receiver or amplifier
using an HDMI cable in order to listen to the Dolby TrueHD,
Dolby Digital Plus, DTS-HD Master Audio or DTS-HD High
Resolution Audio signals converted into linear PCM, connect
the TV to the AV receiver or amplifier using an HDMI cable
(pages 14 and 17).
Setup Navigator
BD PLAYER
Select the screen aspect ratio to match
your TV.
Audio is not output from HDMI
terminal when S-Video/Video or
Component Video is selected.
Please go back and make the
proper selection again.
8
Check the settings.
Select Proceed, then press ENTER.
Go Back
Setup Navigator
BD PLAYER
• Linear PCM audio signals (2 channels) are output from all
terminals other than the ones selected for Audio, regardless of
the audio format or the player’s settings.
Select [Proceed] if you want to start testing
your audio and video settings.
Proceed
5
Select and set the HDMI High-Speed Transmission setting.
Use / to select, then press ENTER.
TOOLS
TOP MENU
ENTER
9
Output test tones.
Use / to select Yes, then press ENTER.
HOME
MENU
RETURN
Setup Navigator
BD PLAYER
Setup Navigator
BD PLAYER
The test tone will be output.
Reduce the volume to an appropriate level.
Select the HDMI Hi-speed transmission setting.
Yes
No
Off
On
The video and/or audio may not be output under certain setup.
The setup menu comes back in 30 seconds.
Normally select [On] (Recommended).
Select [Off] if the video or audio of HDMI-connected
was not output in the test output.
Caution
When HDMI High-Speed Transmission is set to On, use a High
Speed HDMI™ cable. The picture and sound may not be output
properly if any other HDMI cable (standard HDMI™ cable) is used.
• The screen in step 10 and test tones are output simultaneously
according to the settings in steps 4 to 7. Lower the volume of the
devices connected with the player.
Proceed to step 8.
6
Select the output video resolution from the COMPONENT
VIDEO output terminals.
Use / to select, then press ENTER.
Setup Navigator
BD PLAYER
Select the output video resolution at the
Component video terminal.
If you select [Source Direct], the output
resolution is determined according to the
video format of the playing source.
21
En
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Finish the Setup Navigator menu.
Use / to select Finish, then press ENTER.
• If you make a mistake when inputting the code, start over from
the beginning.
03
• When there are multiple codes for a manufacturer, try inputting
them in the indicated order until the TV can be operated.
Setup Navigator
BD PLAYER
Setup is complete!
2
Check that the TV can be operated.
STANDBY/ON
OPEN/CLOSE
Finish
Go Back
TV CONTROL
INPUT
SELECT
CH
VOL
The setup menu comes back in 30 seconds.
Caution
To redo the settings from the start, select Go Back.
• For some models it may not be possible to operate the TV with
the player’s remote control, even for TVs of brands listed on the
manufacturer code list.
Depending on the output terminal setting of step 4 or the HDMI
cable being used, it may happen that no picture and/or sound is
output. If this happens, the setup returns to step 4 if there is no
operation for over 30 seconds. Once the setup returns to step 4, redo
the settings according to the connected devices and the HDMI
cable being used.
• The setting may be restored to the default after the batteries are
replaced. If this happens, reset it.
TV Preset code list
About the screen saver
The screen saver is automatically activated if there is no operation
for over 1 minute after playback is stopped or paused. The screen
saver turns off when an operation is performed on the player or
remote control.
Manufacturer Code(s)
PIONEER 00, 31, 32, 07, 36, 42, 51
ACURA 44
ELIN 07
ELITE 41
ADMIRAL 31
AIWA 60
AKAI 32, 35, 42
AKURA 41
ALBA 07, 39, 41, 44
AMSTRAD 42, 44, 47
ANITECH 44
ASA 45
ASUKA 41
AUDIOGONIC 07, 36
BASIC LINE 41, 44
BAUR 31, 07, 42
BEKO 38
ELTA 44
EMERSON 42
ERRES 07
The screen saver is automatically activated if there is no operation
for over 1 minute after the Home Menu or Home Media Gallery is
displayed while playing a BD or DVD.
FERGUSON 07, 36, 51
FINLANDIA 35, 43, 54
FINLUX 32, 07, 45, 48, 53, 54
FIRSTLINE 40, 44
FISHER 32, 35, 38, 45
FORMENTI 32, 07, 42
FRONTECH 31, 42, 46
FRONTECH/PROTECH 32
FUJITSU 48
FUNAI 40, 46, 58
GBC 32, 42
GE 00, 01, 08, 07, 10, 11, 17, 02, 28, 18
GEC 07, 34, 48
GELOSO 32, 44
GENERAL 29
GENEXXA 31, 41
GOLDSTAR 10, 23, 21, 02, 07, 50
GOODMANS 07, 39, 47, 48, 56
GORENJE 38
With CDs and music files, the screen saver is automatically
activated if no button is operated for over 1 minute, even while the
CD or music file is playing.
Operating the TV with the
player’s remote control
BEON 07
BLAUPUNKT 31
BLUE SKY 41
BLUE STAR 18
BPL 18
BRANDT 36
BTC 41
BUSH 07, 41, 42, 44, 47, 56
CASCADE 44
CATHAY 07
CENTURION 07
CGB 42
When the manufacturer code for your brand of TV is set on the
player’s remote control, the TV can be operated using the player’s
remote control.
1
Input the 2-digit manufacturer code.
Press the number buttons (0 to 9) to input the code while pressing
TV CONTROL .
GPM 41
GRAETZ 31, 42
GRANADA 07, 35, 42, 43, 48
GRADIENTE 30, 57
GRANDIN 18
GRUNDIG 31, 53
HANSEATIC 07, 42
HCM 18, 44
STANDBY/ON
OPEN/CLOSE
CIMLINE 44
CLARIVOX 07
CLATRONIC 38
CONDOR 38
TV CONTROL
INPUT
SELECT
CH
VOL
CONTEC 44
CROSLEY 32
CROWN 38, 44
CRYSTAL 42
CYBERTRON 41
DAEWOO 07, 44, 56
DAINICHI 41
DANSAI 07
HINARI 07, 41, 44
HISAWA 18
HITACHI 31, 33, 34, 36, 42, 43, 54, 06, 10,
24, 25, 18
HUANYU 56
HYPSON 07, 18, 46
ICE 46, 47
FL DIMMER
AUDIO SUBTITLE ANGLE
DAYTON 44
DECCA 07, 48
DIXI 07, 44
IMPERIAL 38, 42
INDIANA 07
INGELEN 31
CLEAR
AUDIO
ENTER
OUTPUT
RESOLUTION
VIDEO
DUMONT 53
INTERFUNK 31, 32, 07, 42
Note
• The factory setting is PIONEER 00.
22
En
Download from Www.Somanuals.com. All Manuals Search And Download.
INTERVISION 46, 49
ISUKAI 41
ITC 42
ITT 31, 32, 42
JEC 05
JVC 13, 23
KAISUI 18, 41, 44
KAPSCH 31
KENDO 42
KENNEDY 32, 42
KORPEL 07
RADIOSHACK 10, 23, 21, 02
RBM 53
RCA 01, 10, 15, 16, 17, 18, 61, 62, 09
REDIFFUSION 32, 42
REX 31, 46
ROADSTAR 41, 44, 46
SABA 31, 36, 42, 51
SAISHO 39, 44, 46
SALORA 31, 32, 42, 43
SAMBERS 49
SAMSUNG 07, 38, 44, 46, 69, 70
SANYO 35, 45, 48, 21, 14, 91
SBR 07, 34
Using the TOOLS menu
03
Various functions can be called out according to the player’s
operating status.
1
Display the TOOLS menu.
Press TOOLS.
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
KOYODA 44
TOOLS
TOP MENU
LEYCO 07, 40, 46, 48
LIESENK&TTER 07
LOEWE 07
LUXOR 32, 42, 43
M-ELECTRONIC 31, 44, 45, 54, 56, 07,
36, 51
SCHAUB LORENZ 42
SCHNEIDER 07, 41, 47
SEG 42, 46
SEI 32, 40, 49
SELECO 31, 42
ENTER
MAGNADYNE 32, 49
MAGNAFON 49
MAGNAVOX 07, 10, 03, 12, 29
MANESTH 39, 46
MARANTZ 07
SHARP 02, 19, 27, 67, 90
SIAREM 32, 49
SIEMENS 31
SINUDYNE 32, 39, 40, 49
SKANTIC 43
MARK 07
SOLAVOX 31
MATSUI 07, 39, 40, 42, 44, 47, 48
MCMICHAEL 34
MEDIATOR 07
MEMOREX 44
METZ 31
MINERVA 31, 53
MITSUBISHI 09, 10, 02, 21, 31
MULTITECH 44, 49
NEC 59
NECKERMANN 31, 07
NEI 07, 42
SONOKO 07, 44
SONOLOR 31, 35
SONTEC 07
BD PLAYER
TOOLS
Video Adjust
Audio DRC
Add to HMG Playlist
Audio
SONY 04
SOUNDWAVE 07
STANDARD 41, 44
STERN 31
SUSUMU 41
SYSLINE 07
Subtitle
2
Select and set the item.
Use / to select, then press ENTER.
TANDY 31, 41, 48
TASHIKO 34
TOOLS
TOP MENU
NIKKAI 05, 07, 41, 46, 48
NOBLIKO 49
TATUNG 07, 48
TEC 42
NOKIA 32, 42, 52
NORDMENDE 32, 36, 51, 52
OCEANIC 31, 32, 42
ORION 32, 07, 39, 40
OSAKI 41, 46, 48
OSO 41
TELEAVIA 36
TELEFUNKEN 36, 37, 52
TELETECH 44
TENSAI 40, 41
THOMSON 36, 51, 52, 63
THORN 31, 07, 42, 45, 48
TOMASHI 18
ENTER
HOME
MENU
RETURN
OSUME 48
OTTO VERSAND 31, 32, 07, 42
PALLADIUM 38
PANAMA 46
PANASONIC 31, 07, 08, 42, 22
PATHO CINEMA 42
PAUSA 44
TOSHIBA 05, 02, 26, 21, 53
TOWADA 42
ULTRAVOX 32, 42, 49
UNIDEN 92
UNIVERSUM 31, 07, 38, 42, 45, 46, 54
VESTEL 07
VICTOR 13
Note
• Items that cannot be changed are displayed in gray. The items
that can be selected depend on the player’s status.
To close the TOOLS menu
PHILCO 32, 42
PHILIPS 31, 07, 34, 56, 68
PHOENIX 32
VOXSON 31
WALTHAM 43
Press
TOOLS or
RETURN.
PHONOLA 07
PROFEX 42, 44
PROTECH 07, 42, 44, 46, 49
QUELLE 31, 32, 07, 42, 45, 53
R-LINE 07
WATSON 07
TOOLS menu item list
WATT RADIO 32, 42, 49
WHITE WESTINGHOUSE 07
YOKO 07, 42, 46
ZENITH 03, 20
Item
Description
Output Video Resolution Switch the output video resolution from the
various output terminals (page 25).
RADIOLA 07
Play from Beginning
Play the selected title, track or file from the
start.
Play Mode
Angle
Display the Play Mode screen (page 29).
Switch the BD-ROM/DVD-Video disc’s camera
angles (page 28).
Subtitle
Switch the subtitles (page 28).
Audio
Switch the audio streams/channels (page 28).
Secondary Audio
Switch the BD-ROM’s secondary audio
streams/channels (page 28).
Secondary Video
Original/Play List
Switch the BD-ROM’s secondary video
(Picture-in-Picture) (page 29).
Switch the DVD-R/-RW’s (VR format) list
screen between the original list and the
playlist.
23
En
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Erase the data.
Item
Description
03
Use / to select Yes, then press ENTER.
Add to HMG Playlist
Add the selected track or file to the HMG
Playlist (page 35).
TOOLS
TOP MENU
Delete from HMG Playlist Delete the selected track or file from the HMG
Playlist (page 36).
ENTER
Now Playing
Display the playback screen of the currently
playing track or file.
HOME
MENU
RETURN
Video Adjust
Display the picture quality adjustment screen
(page 37).
Audio DRC
Adjust the Audio DRC (page 38).
Erases all of the data
added from BDMV.
Please wait a while.
BDMV Data Erase
Erase the additional data from BD-ROMs.
Erasing the additional
data from BD-ROMs
OK to erase data?
Yes
No
When a BD-ROM is played, additional data may be stored in the
player’s memory (local storage).
Caution
If the message indicating low memory (local storage) appears, erase
the BDMV data.
• It takes time to erase the BDMV data for a while. Do not unplug
the power cord for about 10 seconds after performing the above
procedure.
Caution
Switching the video
output terminal
• When the BDMV data is erased, all the data of secondary video
(Picture-in-Picture), secondary audio, bookmark, etc. that has
been stored is erased.
1
Display the Tools menu.
Use the procedure below to switch the video output terminal. Switch
between the digital output (HDMI output) and the analog output
(Component Video output, S-Video output or Video output).
With no disc loaded, press the
TOOLS button.
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
TOOLS
TOP MENU
Switch the terminal from which the video signals are
output.
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
ENTER
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
BD PLAYER
TOOLS
DISPLAY POPUP MENU
MENU
Output Video Resolution
BDMV Data Erase
TOOLS
TOP MENU
The video output terminal switches each time the button is pressed.
2
Select and set the item.
Use / to select BDMV Data Erase, then press ENTER.
Caution
TOOLS
TOP MENU
• The picture may not be displayed for a while when the video
output terminal is switched.
• When the HDMI OUT terminal is selected, no video signals are
ENTER
output from the other video output terminals.
HOME
MENU
RETURN
• When a video output terminal other than the HDMI OUT
terminal is selected, no audio and video signals are output from
the HDMI OUT terminal.
24
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the output
video resolution
Caution
03
• On some TVs, the picture may not be displayed properly when
the resolution is switched. If this happens, use OUTPUT
RESOLUTION to set to a resolution at which the picture is
properly displayed.
Use the procedure below to switch the output video resolution from
the various video output terminals.
• When video signals are being output with a resolution of 1080/
60i, 1080/60p, 1080/24p or 720/60p from the HDMI output
terminal or component video output terminals, the picture may
be output with an aspect ratio of 16:9, even if the TV Aspect
Ratio is set to 4:3 (Standard).
Press OUTPUT RESOLUTION.
CLEAR
ENTER
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
• The picture may not be displayed for a while when the resolution
is switched.
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
About Film material
The film material is a video signal with a frame rate of 24 frames/
second. For example, these materials include 1080/24p, 720/24p,
etc.
The current output video resolution is displayed on the TV screen
and on the player’s front panel display.
When pressed again, the output video resolution switches.
Video resolution of the
currently playing disc
Example:
Video resolution of the
currently playing disc
Example:
ꢀ
Auto
ꢁ
Source : 1080/24p
Output Video Resolution
ꢀ
Auto
ꢁ
Source : 1080/60i
Output Video Resolution
Current Output : 1080/24p
Current Output : 1080/60i
Output video resolution
from the player
Output video resolution
from the player
To output film material
The output video resolution can also be switched using /.
To output 1080/24p film material from the HDMI output terminal, set
the output video resolution to either Auto or Source Direct.
The output video resolution can also be switched by pressing
RESOLUTION on the player’s front panel.
The output video resolution can also be switched by selecting
Output Video Resolution from the TOOLS menu.
Caution
The output video resolution depends on the video output terminal.
See the table below.
• 1080/24p signals can only be output from the HDMI OUT
terminal. They cannot be output from other video terminals.
Output
video
resolution
setting
HDMI OUT
terminal
COMPONENT
VIDEO output
S-VIDEO/VIDEO
output terminal
• When Auto is selected, the picture is output at 60 frames/
second if your TV is not compatible with 1080/24p signals.
1
1
terminals
• When Source Direct is selected, the signals are output as such,
even if your TV is not compatible with 1080/24p signals. If the
picture is not displayed properly, use OUTPUT RESOLUTION to
set to the output video resolution at which the picture is properly
displayed.
2
Resolution
—
—
Auto
3,4
preferred by TV
480i
480/60i
480/60p
1080/60i
480/60i
480/60p
480/60i
480p
1080i
• 720/24p video signals are output at 60 frames/second, even if
the resolution is set to Auto or Source Direct.
5
1080/60i
2
6
—
—
1080p
1080/60p
Source
Direct
Resolution
Resolution
480/60i
recorded on
recorded on
3,7,8
7,8,9
disc
disc
1. Depending on the BD, the pictures may not be output.
2. Cannot be selected when the video signals are being output from the
COMPONENT VIDEO output terminals, S-VIDEO output terminal or the VIDEO
output terminal.
3. For details on the output of film material (1080/24p or 720/24p video signals),
see To output film material.
4. Sources with a resolution of 720/60p and 720/24p are output at 1080/60i, even
if the TV’s recommended resolution is 1080/60p.
5. DVD-Video or DVD VR format is output at 480/60p. BDs format may be output
at 480/60p.
6. Depending on the connected HDMI cable, the video signals may not be output.
Also, sources with a resolution of 720/60p and 720/24p are output at 1080/60i.
7. Depending on the connected TV, the video signals may not be output.
8. 720/24p film material is output at 720/60p.
9. 1080/24p film material is output at 1080/60i.
25
En
Download from Www.Somanuals.com. All Manuals Search And Download.
CPhlaapteyr b4 ack
04
Resuming playback from where it was
stopped (resume playback function)
Playing discs or files
• When STOP is pressed during playback, the point at which
the disc stopped is stored in the memory. When PLAY is
pressed, playback resumes from that point.
This section describes the player’s main operations.
For the types of discs that can be played, see Playable discs on
page 8. For the types of files that can be played, see Playable files on
page 10. Music files recorded on discs are played with Home Media
Gallery (page 34).
• For CDs and music files, playback starts from the beginning of
the track/file that was playing.
• To cancel the resume playback function, press STOP while
playback is stopped.
1
Press STANDBY/ON to turn on the power.
Turn the TV’s power on and switch its input beforehand.
STANDBY/ON
OPEN/CLOSE
Note
• The resume playback function is canceled automatically in the
following cases:
TV CONTROL
INPUT
SELECT
CH
VOL
– When the disc tray is opened.
– When the file list window is switched.
2
disc.
Press OPEN/CLOSE to open the disc tray and load the
– When the power is turned off. (For BDs and DVDs this does
not cancel the resume playback function.)
• The resume playback function cannot be used for some discs.
STANDBY/ON
OPEN/CLOSE
TV CONTROL
Forward and reverse scanning
INPUT
SELECT
CH
VOL
BD
DVD
AVCHD
CD
Music files
Note
• Load the disc with the printed side facing up.
• Several dozen seconds are required to read the disc.
Once reading is completed, the type of disc is
displayed on the player’s front panel display.
1
During playback, press or .
PLAY
3
Press PLAY to play the disc.
PREV
PAUSE
STOP
NEXT
PLAY
PREV
RED
PAUSE
GREEN
STOP
BLUE
NEXT
• The scanning speed switches each time the button is pressed.
The speed steps depend on the disc or file (the speed is
displayed on the TV screen).
YELLOW
• Forward or reverse scanning is also possible by holding the
button down. Normal playback resumes when the button is
released.
To pause, press PAUSE during playback.
To stop, press STOP during playback.
Note
Note
• Some discs start playing automatically when the disc tray is
closed.
• No sound is output when scanning BDs and DVDs.
• Sound is output when scanning CDs and music files.
• DVD-Video discs have parental lock features. Input the
password registered in the player’s settings to unlock the
parental lock. For details, see page 46.
• For some discs, normal playback resumes automatically when
the chapter switches.
• For some BD-R/RE, playback protection is set for the disc or
titles. Input the code number set for the disc to unlock the
protection.
To resume normal playback
Press PLAY.
If the disc menu is displayed
For some discs, the disc menu is displayed automatically when
playback starts. The contents of the disc menu and the way to
operate differ from disc to disc.
26
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing specific titles, chapters or Playing in slow motion
04
tracks
BD
DVD
AVCHD
CD
Music files
BD
DVD
AVCHD
CD
Music files
While playback is paused, press and hold / or /.
Input the number of the title, chapter or track you want to
play.
• Use the number buttons (0 to 9) to input the number, then press
ENTER.
PLAY
PREV
PAUSE
STOP
NEXT
• The speed switches each time the button is pressed (the speed
is displayed on the TV screen). The speed steps depend on the
disc.
Note
CLEAR
ENTER
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
• It is not possible to switch the speed during reverse slow motion
playback.
• No sound is output during slow motion playback.
Note
• For some discs, normal playback resumes automatically when
the chapter switches.
• For some discs, it is not possible to specify and play titles,
chapters or tracks.
• There are some discs for which slow motion playback is not
possible.
• Press CLEAR to clear the values you have input.
To resume normal playback
Skipping content
Press PLAY.
BD
DVD
AVCHD
CD
Music files
Step forward and step reverse
BD
Press PREV or NEXT.
DVD
AVCHD
CD
Music files
PLAY
PREV
RED
PAUSE
GREEN
STOP
BLUE
NEXT
While playback is paused, press / or /.
YELLOW
• When NEXT is pressed, the disc skips ahead to the
PLAY
beginning of the next title/chapter/track/file.
PREV
PAUSE
STOP
NEXT
• When PREV is pressed, the disc skips back to the
beginning of the currently playing title/chapter/track/file. Press
twice to skip back to the beginning of the previous title/chapter/
track/file.
• The disc moves a step forward or reverse each time the button
is pressed.
Note
Note
• For some discs, normal playback resumes automatically when
the chapter switches.
• There are some discs and files for which skipping is not
possible.
• There are some discs for which step forward/reverse playback is
not possible.
To resume normal playback
Press PLAY.
27
En
Download from Www.Somanuals.com. All Manuals Search And Download.
• The subtitles can also be switched using /.
Switching the camera angles
04
• The subtitles can also be switched by selecting Subtitle from
the TOOLS menu.
For BD-ROM and DVD-Video discs on which multiple angles are
recorded, the angles can be switched during playback.
Note
BD
• The types of recorded subtitles depend on the disc.
DVD
AVCHD
CD
Music files
• If the subtitles are not switched when SUBTITLE is pressed,
switch them from the menu screen.
During playback, press ANGLE.
INPUT
SELECT
Turning the subtitles off
CH
VOL
Press SUBTITLE, then press CLEAR.
FL DIMMER
AUDIO SUBTITLE ANGLE
Switching the audio streams/
channels
• The current angle and total number of recorded angles are
displayed on the TV screen and on the player’s front panel
display. When pressed again, the angle switches.
For discs on which multiple audio streams/channels are recorded,
audio streams/channels can be switched during playback. Also use
this procedure to switch the secondary audio for BD-ROMs on
which secondary audio is recorded.
Current angle/Total number of
recorded angles
Example:
ꢀ
1/4
ꢁ
Angle
BD
DVD
AVCHD
CD
Music files
• The angles can also be switched using /.
• The angles can also be switched by selecting Angle from the
TOOLS menu.
During playback, press AUDIO.
• To switch the secondary audio, press SECONDARY AUDIO.
• Angle mark
is displayed for scenes at which multiple
angles are recorded.
FL DIMMER
AUDIO SUBTITLE ANGLE
Note
• For some discs, the angle can also be switched on the menu
screen.
• Angle mark
is set to Off (page 42).
is not displayed if Angle/Secondary Indicator
CLEAR
ENTER
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
Switching the subtitles
VIDEO SELECT PLAY MODE
• The current audio stream/channel and total number of recorded
audio streams/channels are displayed on the TV screen and on
the player’s front panel display. When pressed again, the audio
stream/channel switches.
For discs on which multiple subtitles are recorded, the subtitles can
be switched during playback.
BD
DVD
AVCHD
CD
Music files
Current audio stream/Total number
of recorded audio streams
Example:
ꢀ
Audio
During playback, press SUBTITLE.
INPUT
SELECT
2/2 English
Dolby True HD
96kHz 7.1ch L C R Ls Rs Lb Rb LFE
CH
VOL
ꢁ
FL DIMMER
AUDIO SUBTITLE ANGLE
Number of
channels
Channels recorded
on disc
Audio type
• The audio streams/channels can also be switched using /.
• The current subtitle and total number of recorded subtitles are
displayed on the TV screen and on the player’s front panel
display. When pressed again, the subtitle switches.
• The audio streams/channels can also be switched by selecting
Audio or Secondary Audio from the TOOLS menu.
• Secondary audio mark
is displayed for scenes at which
Current subtitle/Total number of
recorded subtitles
Example:
secondary audio is recorded.
ꢀ
1/2 English
ꢁ
Subtitle
28
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying the disc information
04
Note
• The types of recorded audio streams/channels depend on the
disc.
BD
DVD
AVCHD
CD
Music files
• If the audio stream/channel is not switched when AUDIO is
pressed, switch it from the menu screen.
• Some BD-ROMs do not include secondary audio.
Press DISPLAY.
• Secondary audio mark
is not displayed if Angle/
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
Secondary Indicator is set to Off (page 42).
DISPLAY POPUP MENU
MENU
Switching the secondary video
TOOLS
TOP MENU
Use the procedure below to switch the secondary video (Picture-in-
Picture) recorded on the BD-ROM.
The disc information appears on the TV screen. The information
switches each time the button is pressed.
BD
DVD
AVCHD
CD
The information display differs during playback and when playback
is stopped.
Music files
Using the Play Mode
functions
During playback, press SECONDARY VIDEO.
CLEAR
ENTER
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
Playing from a specific time (Time
Search)
DISPLAY POPUP MENU
• The current secondary video stream and total number of
recorded secondary video streams are displayed on the TV
screen and on the player’s front panel display. When pressed
again, the secondary video stream switches.
1
During playback, press PLAY MODE to display the Play
Mode screen.
Current secondary video stream/Total number
of recorded secondary video streams
Example:
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
ꢀ
Secondary Video
1/4
ꢁ
DISPLAY POPUP MENU
MENU
TOOLS
TOP MENU
• The secondary video streams can also be switched using /.
• The secondary video streams can also be switched by selecting
Secondary Video from the TOOLS menu.
The Play Mode screen can also be displayed by selecting Play Mode
from the TOOLS menu.
• Secondary video mark
secondary video is recorded.
is displayed for scenes at which
2
Select Time Search.
Use / to select, then press ENTER.
TOOLS
TOP MENU
Note
• Some BD-ROMs do not include secondary video.
ENTER
• Secondary video mark
Indicator is set to Off (page 42).
is not displayed if Angle/Secondary
HOME
MENU
RETURN
Play Mode
Time Search
Title Search
Chapter Search
A-B Repeat
Repeat/Random
29
En
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Input the time.
2
Select the type of search.
04
Use the number buttons (0 to 9) or / to input the time.
Use / to select, then press ENTER.
Use / to move the cursor.
See the table on page 33 for the search types.
TOOLS
TOP MENU
ENTER
HOME
MENU
RETURN
CLEAR
ENTER
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
Play Mode
DISPLAY POPUP MENU
MENU
Time Search
Title Search
Chapter Search
A-B Repeat
TOOLS
TOP MENU
Repeat/Random
ENTER
HOME
MENU
3
Input the number.
RETURN
Use the number buttons (0 to 9) or / to input the number.
Use / to move the cursor.
Time Search
1
2
:
4
5
:
0
0
Search
CLEAR
ENTER
Note
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
• To play from 45 minutes, input 0, 0, 4, 5, 0 and 0, then press
ENTER.
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
• To play from 1 hour 20 minutes, input 0, 1, 2, 0, 0 and 0, then
press ENTER.
TOOLS
TOP MENU
• Press CLEAR to clear the values you have input.
4
Starting playback from the specified time.
ENTER
Use / to select Search, then press ENTER.
HOME
MENU
RETURN
To cancel Time Search
Press PLAY MODE or
RETURN.
Note
Title
Title Search
0
3
2
Search
• There are some discs for which Time Search is not available.
4
Starting playback from the specified title, chapter or track.
Playing a specific title, chapter or
track (Search)
Use / to select Search, then press ENTER.
To cancel the search
1
Press PLAY MODE to display the Play Mode screen.
Press PLAY MODE or
RETURN.
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
Note
DISPLAY POPUP MENU
MENU
• To search for title 32, input 0, 3 and 2, then press ENTER.
• There are some discs for which searching is not available.
• Press CLEAR to clear the values you have input.
TOOLS
TOP MENU
The Play Mode screen can also be displayed by selecting Play Mode
from the TOOLS menu.
30
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a specific section within a Playing repeatedly (Repeat Play)
04
title or track repeatedly (A-B
Use this procedure to play the currently playing disc, title, chapter,
Repeat)
track or file repeatedly.
1
During playback, press PLAY MODE to display the Play
Use this procedure to play a specific section within a title or track
repeatedly.
Mode screen.
1
During playback, press PLAY MODE to display the Play
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
Mode screen.
DISPLAY POPUP MENU
MENU
TOOLS
TOP MENU
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
The Play Mode screen can also be displayed by selecting Play Mode
MENU
from the TOOLS menu.
TOOLS
TOP MENU
2
Select Repeat/Random.
The Play Mode screen can also be displayed by selecting Play Mode
from the TOOLS menu.
Use / to select, then press ENTER.
TOOLS
TOP MENU
2
Select A-B Repeat.
Use / to select, then press ENTER.
ENTER
Play Mode
HOME
MENU
RETURN
Time Search
Title Search
Chapter Search
A-B Repeat
Play Mode
Repeat/Random
Time Search
Title Search
Chapter Search
A-B Repeat
3
Select the starting point for A-B Repeat.
Use / to select A (Start), then press ENTER.
Repeat/Random
3
Select the type of Repeat Play.
A-B Repeat
A (Start)
B (End)
Off
Use / to select, then press ENTER.
See the table on page 33 for the types of repeat playback.
4
Select the end point for A-B Repeat.
Repeat/Random
Use / to select B (End), then press ENTER.
A-B Repeat playback starts.
Off
Repeat All
Repeat Track
Random Track
To cancel A-B Repeat play
• Select Off from the Repeat/Random screen, then press ENTER.
• During playback, press STOP or CLEAR.
To cancel Repeat Play
• Select Off from the Repeat/Random screen, then press ENTER.
Note
• A-B Repeat play is canceled in the following cases:
• During playback, press STOP or CLEAR.
– When the angle is switched (for BD-ROM and DVD-Video
discs only).
Note
– When you search outside the repeat range.
– When you start other repeat or random play.
• There are some discs and files for which Repeat Play is not
available.
• The type of repeat modes depends on the disc and file being
played. See the table on page 33.
• Repeat Play is canceled in the following cases:
– When the angle is switched (for BD-ROM and DVD-Video
discs only).
– When you search outside the repeat range.
– When you start other repeat or random play.
31
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing in random order (Random
Play)
04
Use this procedure to play the tracks or files in random order.
1
During playback, press PLAY MODE to display the Play
Mode screen.
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
TOOLS
TOP MENU
The Play Mode screen can also be displayed by selecting Play Mode
from the TOOLS menu.
2
Select Repeat/Random.
Use / to select, then press ENTER.
TOOLS
TOP MENU
ENTER
HOME
MENU
RETURN
Play Mode
Time Search
Title Search
Chapter Search
A-B Repeat
Repeat/Random
3
Select the Random Play.
Use / to select, then press ENTER.
Repeat/Random
Off
Repeat All
Repeat Track
Random Track
To cancel Random Play
• Select Off from the Repeat/Random screen, then press ENTER.
• During playback, press STOP or CLEAR.
Note
• There are some discs and files for which Random Play is not
available.
• Random Play is canceled in the following cases:
– When you use the search function.
– When you start repeat play.
32
En
Download from Www.Somanuals.com. All Manuals Search And Download.
About Play Mode types
04
The functions that can be used differ according to the type of disc and file. In some cases, some of the functions cannot be used. Check the
usable functions on the table below.
Disc/file type
DVD-R
DVD-RW
(VR format)
1
Play Mode type
Mark
DVD-
BD-R
BD-RE
2
AVCHD
Music file
CD
BD-ROM
2
Video
Playing a specific section within a title or
track repeatedly (A-B Repeat)
Playing a title repeatedly (Title Repeat)
Playing a chapter repeatedly (Chapter
Repeat)
Playing a track or file repeatedly (Track
Repeat)
Playing all the titles, tracks or files on the
disc repeatedly (All Repeat)
3
4
5
Playing the tracks or files in random order
(Random Track)
Playing from a specific time (Time Search)
Playing a specific title (Title Search)
—
—
Playing a specific chapter (Chapter
Search)
—
—
Playing a specific track (Track Search)
1. During playback in a Play Mode, the type of Play Mode is indicated by the mark.
2. For BD-ROM and DVD-Video discs, some of the functions cannot be used with some titles.
3. The original titles are played repeatedly. However, the playlist titles cannot be played repeatedly.
4. The files in the folder or HMG Playlist are played repeatedly.
5. The tracks in the disc or HMG Playlist are played repeatedly.
33
En
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Select the title or track to be played.
Playing from the Home
Media Gallery
04
Use / to select, then press ENTER.
BD-R BDAV
My Favorite TV Program
1 Morning serial drama
2 News at noon
3 Evening movie
4 Midnight variety show
5 Playback protection
6 World heritage
7 Drama: Blank time
8 Music and us
The Home Media Gallery lets you display a list of the titles, tracks or
files recorded on the disc. The discs that can be played from the
Home Media Gallery are as shown below (see also page 8).
• BD-R/-RE discs
• DVDs recorded in VR format
• Music CDs (CD-DAs and DTS-CDs)
10 items
Title Total : 0 h 54 m 30 s
Recording Date :
Original
11/11/2008
• DVDs/CDs on which only data files of music files, etc. are
recorded
Playback starts.
Closing the Home Media Gallery
Playing discs
Press HOME MEDIA GALLERY (or
HOME MENU).
1
Press HOME MEDIA GALLERY to display the Home Media
Note
Gallery.
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
• When playing a music CD (CD-DA or DTS-CD), the Now Playing
screen is displayed.
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
• Some BD-R/-RE discs have playback protection. To cancel the
protection, input the password set for the disc.
DISPLAY POPUP MENU
MENU
• To play DVD-R/-RW (VR format) playlists, switch to the playlist
using the Original/Play List command on the TOOLS menu
(page 23).
TOOLS
TOP MENU
The Home Media Gallery can also be displayed by selecting Home
Media Gallery from Home Menu then pressing ENTER.
Playing music files
2
Select the disc.
Use / to select, then press ENTER.
TOOLS
TOP MENU
1
Press HOME MEDIA GALLERY to display the Home Media
Gallery.
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
ENTER
HOME
MENU
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
RETURN
DISPLAY POPUP MENU
MENU
TOOLS
TOP MENU
Home Media Gallery
BD PLAYER
The Home Media Gallery can also be displayed by selecting Home
BD-R BDAV
HMG Playlist
Media Gallery from Home Menu then pressing ENTER.
2
Select the disc.
Use / to select, then press ENTER.
TOOLS
TOP MENU
Search for the part you want to play from a list of the disc's content.
ENTER
HOME
MENU
RETURN
Home Media Gallery
BD PLAYER
CD-ROM
HMG Playlist
Search for the part you want to play from a list of the disc's content.
34
En
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Select Music.
Playback starts. The Now Playing screen (shown below) is displayed.
04
Press ENTER.
Currently playing
file
CD-ROM
Music 001.mp3
Play 0.02.33
0.05.34
Music
DATA DISC
Total file playing
time
Elapsed time
View available music.
4
Select Folders or All Songs.
Use / to select, then press ENTER.
Playing in the desired order (HMG
Playlist)
• Folders – The files in the selected folder are displayed.
• All Songs – All the recorded files are displayed.
Music
CD-ROM
The discs that can add tracks and files to the HMG (Home Media
Gallery) Playlist are as shown below.
Folders
All Songs
• Music CDs (CD-DAs and DTS-CDs)
• DVDs/CDs on which music files are recorded
Adding tracks/files
Use this procedure to add tracks and files, and create the HMG
Playlist.
1
Press HOME MEDIA GALLERY to display the Home Media
Gallery.
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
If you have selected All Songs, proceed to step 6.
5
Select the folder containing the file you want to play.
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
Use / to select, then press ENTER.
DISPLAY POPUP MENU
MENU
Folders
TOOLS
TOP MENU
CD-ROM/Music
Music Folder001
Music Folder002
Music Folder003
Music Folder004
Music005.mp3
Music006.mp3
Music007.mp3
Music008.mp3
The Home Media Gallery can also be displayed by selecting Home
Media Gallery from Home Menu pressing ENTER.
2
Select the disc.
Load the disc beforehand.
Use / to select, then press ENTER.
TOOLS
TOP MENU
15 items
A list of the files and/or the sub-folders in the selected folder is
displayed.
ENTER
HOME
MENU
RETURN
6
Select and set the file you want to play.
Use / to select, then press ENTER.
Home Media Gallery
Music Folder001
CD-ROM/Music/Folders
BD PLAYER
CD-ROM
Music001.mp3
Music002.mp3
Music003.mp3
Music004.mp3
Music005.mp3
Music006.mp3
Music007.mp3
Music008.mp3
HMG Playlist
Search for the part you want to play from a list of the disc's content.
20 items
35
En
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Select the track/file to be added.
The Home Media Gallery can also be displayed by selecting Home
Media Gallery from Home Menu pressing ENTER.
04
Use / to select.
2
Select HMG Playlist.
Folders
CD-ROM/Music
Use / to select, then press ENTER.
Music001.mp3
Home Media Gallery
Music002.mp3
Music003.mp3
Music004.mp3
Music005.mp3
Music006.mp3
Music007.mp3
Music008.mp3
BD PLAYER
CD-ROM
HMG Playlist
15 items
Display the HMG Playlist.
4
5
Press
TOOLS to display the TOOLS menu.
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
3
Select the track/file to be played.
Use / to select, then press ENTER.
TOOLS
TOP MENU
HMG Playlist
CD-ROM
ENTER
1 Track15.mp3
2 Track07.mp3
3 Track03.mp3
4 Track16.mp3
5 Track08.mp3
6 Track05.mp3
7 Track10.mp3
8 Track03.mp3
Select Add to HMG Playlist.
Use / to select, then press ENTER.
Folders
CD-ROM/Music
Music001.mp3
Music002.mp3
Music003.mp3
Music004.mp3
Music005.mp3
21 items
Playback starts. The Now Playing screen (shown below) is displayed.
BD PLAYER
Currently playing
track/file
TOOLS
Play from Beginning
Add to HMG Playlist
Now Playing
Music 001.mp3
Play 0.02.33
0.05.34
HMG
DATA DISC
Total track/file
playing time
Elapsed time
The track or file selected in step 3 is added to the HMG Playlist.
To add more tracks or files, repeat steps 3 to 5.
To add the currently playing track/file to
the HMG Playlist
While the track/file is playing, press
TOOLS to display
the TOOLS menu.
Press STOP to stop playback. When a music CD is stopped, the
Now Playing screen turns off. When a music file is stopped, the
HMG Playlist screen reappears.
Use / to select Add to HMG Playlist, then press ENTER.
Note
Deleting tracks/files from the HMG Playlist
• A maximum of 24 tracks/files can be added to the HMG Playlist.
• The HMG Playlist is cleared in the following cases:
– When the power is turned off.
Select the track/file to be deleted, then press
TOOLS to
display the TOOLS menu.
– When the disc tray is opened.
Use / to select Delete from HMG Playlist, then press
ENTER.
Playing the HMG Playlist
1
Press HOME MEDIA GALLERY to display the Home Media
Gallery.
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
36
TOOLS
TOP MENU
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
05
Adjusting audio and video
2
Select the item to be adjusted.
Adjusting the video
Use / to select.
Video Adjust [ Memory1 ]
The quality of the playback picture can be adjusted according to the
TV you are using.
Prog. Motion
Pure Cinema
Motion
Still
Auto1
1
During playback, press VIDEO ADJUST to display the Video
Off
Off
Off
Off
Max
Max
Max
Max
YNR
Adjust screen.
CNR
RED
GREEN
BLUE
YELLOW
BNR
MNR
1/2 Page
VIDEO ADJUST
Use [
][
] to adjust the picture to progressive scan.
The Video Adjust screen can also be displayed by selecting Video
Adjust from the TOOLS menu.
3
Adjust the picture quality.
When / are pressed, the adjustments can be made watching
the picture. The detailed settings screen reappears when ENTER is
pressed.
2
Select a preset.
TOOLS
TOP MENU
Prog. Motion
Motion
Still
ENTER
• Prog.Motion – Adjust according to the type of image (movie or
still image). This is effective when outputting video materials as
progressive images.
HOME
MENU
RETURN
• Pure Cinema – This setting optimizes the operation of the
progressive scanning circuit for playing film materials. Normally
set it to Auto1. If the picture seems unnatural, switch this to
Auto 2, On or Off (page 38).
Select using / according to the TV being used.
Video Adjust
PDP
Adjustments
• YNR – Reduces noise in the luminance (Y) signal.
• CNR – Reduces noise in the chroma (C) signal.
• LCD – Select this when connected to a liquid crystal display TV.
• BNR – Reduces the block noise (block-shaped distortion
generated upon MPEG compression).
• PDP – Select this when connected to a plasma TV of another
brand.
• MNR – Reduces the mosquito noise (distortion along the
contours of the picture generated upon MPEG compression).
• Pioneer PDP – Select this when connected to a Pioneer plasma
TV.
• Detail – Emphasizes the picture’s contours.
• Projector – Select this when connected to a front projector.
• White Level – Adjusts the level of the white portions.
• Black Level – Adjusts the level of the black portions.
• Professional – With this setting, video signal processing is
restrained. Select this when connected to a professional
monitor.
• Black Setup – Select the black level as the setup level. Normally
select 7.5 IRE. If the black level is too bright due to the
combination with the connected monitor, select 0 IRE.
• Memory1 to 3 – Picture quality settings with adjusted
parameters can be stored in the memory. For a description of
the parameters, see When Memory1, 2 or 3 is selected below.
• Gamma Correction – Adjusts how the dark portions of the
picture look.
When Memory1, 2 or 3 is selected
• Hue – Adjusts the balance between green and red.
• Chroma Level – Adjusts the density of the colors.
1
Select Adjustments.
Use to select Adjustments, then press ENTER.
A detailed settings screen appears.
Note
• Prog.Motion and Pure Cinema have the effect only for pictures
recorded in the interlaced scan format (480i or 1080i signals).
• Prog.Motion is disabled when Pure Cinema is set to On.
• Black Setup have the effect only for pictures output from the
VIDEO and S-VIDEO output terminals.
• YNR, CNR, BNR and MNR are disabled when 1080/24p signals
are output from the HDMI OUT terminal.
37
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Closing the Video Adjust screen
Closing the Audio DRC screen
05
Press
HOME MENU.
Press ENTER or
HOME MENU.
About Pure Cinema
There are two types of video signals:
Note
• This only affects the Dolby TrueHD, Dolby Digital Plus and Dolby
Digital audio signals of BDs and DVDs.
• Video material – Video signals recorded at 30 frames/second
• Film material – Video signals recorded at 24 frames/second
• When Auto is selected, the setting has the same effect as High
or Off for Dolby TrueHD signals, depending on the content. For
Dolby Digital Plus and Dolby Digital, the setting has the same
effect as Off.
“Pure Cinema” uses signal processing suited for “film material”
when converting 480i or 1080i interlaced video signals into
progressive video signals, resulting in clear picture reproduction
without losing the quality of the material.
• Audio DRC affects the audio signals output from the following
audio output terminals:
is displayed on the disc information screen when playing the
“film material” pictures of DVD-Video discs (page 29).
– Analog audio signals output from the AUDIO OUT (2 ch) or
AUDIO OUT (7.1 ch) terminals.
– Linear PCM audio signals output from the DIGITAL OUT
terminals or HDMI OUT terminal.
Adjusting the Audio DRC
• The effect may be weak for some discs.
Audio DRC (Dynamic Range Control) has the effect of playing loud
sounds softly and soft sounds loudly. Adjust the setting for example
when watching movies late at night and the dialogs are difficult to
hear.
1
During playback, display the TOOLS menu.
Press TOOLS.
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
TOOLS
TOP MENU
ENTER
2
Select and set Audio DRC.
Use / to select, then press ENTER.
TOOLS
TOP MENU
ENTER
HOME
MENU
RETURN
BD PLAYER
TOOLS
Audio
Subtitle
Audio DRC
Video Adjust
Output Video Resolution
3
Adjust the setting.
TOOLS
TOP MENU
ENTER
HOME
MENU
RETURN
Use / to switch between Off, Low, Medium, High and Auto.
Audio DRC
Off
Adjust the audio dynamic range. This setting is
ineffective depending on the playing audio.
38
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6
06
Advanced settings
Changing the settings
(Initial Setup)
Operating the Initial Setup screen
1
When playback is stopped, display the Home Menu screen.
Press HOME MENU.
ENTER
HOME
MENU
RETURN
PLAY
2
Select and set Initial Setup.
Use / to select, then press ENTER.
TOOLS
TOP MENU
ENTER
HOME
MENU
RETURN
HOME MENU
BD PLAYER
Home Media Gallery
Initial Setup
Set up the player for use.
3
Select the item and change the setting.
Use /// to select, then press ENTER.
TOOLS
TOP MENU
ENTER
HOME
MENU
RETURN
Closing the Initial Setup screen
Press
HOME MENU.
39
En
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Note
• Items that cannot be changed are indicated in gray. The items that can be selected depend on the player’s status.
• The factory default settings are indicated in bold.
Setting
Options
Explanation
TV Aspect Ratio
16:9 (Widescreen)
4:3 (Standard)
Full
Select this when connected to a wide (16:9) TV.
Select this when connected to a conventional TV.
4:3 pictures are displayed over the entire screen.
4:3 Video Out
Normal
4:3 pictures are displayed with black bands along the sides. Select this when you cannot
switch the aspect ratio to 4:3 on the TV.
DVD 16:9 Video Out
Letter Box
16:9 pictures are displayed with black bands at the top and bottom when watching on a 4:3
screen.
Pan & Scan
The picture is displayed over the entire screen, with the left and right sides of the 16:9
picture cut off. Select this to watch 4:3 pictures over the entire screen.
Still Picture
Field
This eliminates instability of the picture when playback is paused.
Frame
This makes pictures clear when playback is paused, but instability may be observed.
Field and Frame is selected automatically according to the disc being played.
Auto
Dolby Digital Out
Dolby Digital 1
Dolby Digital audio signals are output. With BD-ROMs, the secondary audio and interactive
audio are mixed for output.
* Only valid for digital audio
outputs.
Dolby Digital 2
Dolby Digital audio signals are output. With BD-ROMs, the signals are output without
mixing the secondary audio and interactive audio signals.
Dolby Digital PCM
Select this when the connected AV receiver or amplifier, etc., is not compatible with Dolby
Digital audio signals. The Dolby Digital audio signals are converted into linear PCM audio
signals for output.
DTS Out
DTS 1
DTS Digital Surround audio signals are output. With BD-ROMs, the secondary audio and
interactive audio are mixed for output.
* Only valid for digital audio
outputs.
DTS 2
DTS Digital Surround audio signals are output. With BD-ROMs, the signals are output
without mixing the secondary audio and interactive audio signals.
DTS PCM
Select this when the connected AV receiver or amplifier, etc., is not compatible with DTS
Digital Surround audio signals. The DTS Digital Surround audio signals are converted into
linear PCM audio signals for output.
AAC Out
AAC
Select this when the connected AV receiver or amplifier, etc., is compatible with AAC audio
signals. The AAC audio signals are output.
* Only valid for digital audio
outputs.
AAC PCM
Select this when the connected AV receiver or amplifier, etc., is not compatible with AAC
audio signals. The AAC audio signals are converted into linear PCM audio signals for
output.
DTS Downmix
Stereo
DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or DTS Digital
Surround audio signals converted to linear PCM audio signals are converted into 2-channel
(stereo) signals for output.
Lt/Rt
DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or DTS Digital
Surround audio signals converted to linear PCM audio signals are converted into 2-channel
signals compatible with Dolby Surround for output (when the connected AV receiver or
amplifier, etc., is compatible with Dolby Pro Logic, the AV receiver or amplifier outputs the
linear PCM audio signals as surround audio signals).
Audio Output Mode
2 Channel
Select this when the TV’s analog 2-channel (stereo) audio input terminals are connected to
the player’s AUDIO OUT (2 ch) terminals.
* Only valid for analog audio
outputs.
Multi-channel
Select this when the multi-channel audio input terminals of an AV receiver or amplifier, etc.,
are connected to the player’s AUDIO OUT (7.1 ch) terminals.
Speaker Setup
When an AV receiver or amplifier, etc., is connected to the player’s AUDIO OUT (7.1 ch) terminals, this sets whether
or not to use the speakers which are connected to the AV receiver or amplifier, as well as the size of the speakers. For
details, see Changing the speaker setup on page 43.
* Only valid for analog audio
outputs.
Channel Level
Fix
The output for the various speakers is set to the maximum.
* Only valid for analog audio
outputs.
Variable
The output level of the various speakers is set within the range of –6.0 dB to +6.0 dB (in 0.5
dB steps) (page 44).
40
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Options
Explanation
06
HDMI High-Speed Transmission On
Select this when connected with a High Speed HDMI™ cable (page 15).
Select this when connected with a Standard HDMI™ cable (page 15).
Off
The player’s setting screen is closed if the output video resolution is switched by changing the HDMI High-Speed Transmission setting.
HDMI Color Space
Auto
The video signal that is output (YCbCr or RGB) is switched automatically.
Select this to output the video signals as YCbCr 4:4:4 signals.
Select this to output the video signals as YCbCr 4:2:2 signals.
YCbCr 4:4:4
YCbCr 4:2:2
RGB (16 to 235)
Select this to output the video signals as RGB signals. Choose this if the colors seem too
dense and all the dark colors are displayed in a uniform black when RGB (0 – 255) is
selected.
RGB (0 to 255)
Select this to output the video signals as RGB signals. Choose this if the colors seem too
faint and the black seems too bright when RGB (16 – 235) is selected.
Normally it is recommended to set this to Auto. When set to Auto, the optimum video signals for your TV are output.
HDMI Audio Out
Auto
The signals are output with as many audio channels as possible. In cases when the number
of channels does not decrease when the signals are output as such without converting
them to linear PCM, they are output as such (page 50).
PCM
Select this when you want the secondary audio and interactive audio signals to be mixed
for output or when you want to output prioritizing sampling frequency over the number of
channels (page 50).
PQLS
Auto
Off
Enables PQLS function (page 15).
Disables PQLS function (page 15).
HDMI Control
On
Select this to control the player with the remote control of the AV device connected using
an HDMI cable. Also refer to About HDMI Control function on page 15.
Off
Select this when you do not want to control the player with the remote control of the AV
device connected using an HDMI cable.
OSD Language
Audio Language
English
Select this to set the language of the on-screen displays to English.
available languages
English
Choose a language for the on-screen displays from the listed languages.
Select this to set both the BD-ROM and DVD-Video default audio language to English.
* For some discs, it may not be
possible to change to the selected
language.
available languages
Choose a language from the listed languages to set the default audio language for BD-ROM
and DVD-Video playback.
Other
Continue to the next screen to set the default audio language for BD-ROM and DVD-Video
playback. You can select the language name or enter the code number (see on page 56 for
the code table). If a language not recorded on the BD/DVD is set, one of the recorded
languages is automatically selected and played.
Subtitle Language
English
Select this to set the default subtitle language for BD-ROM and DVD-Video playback to
English.
* For some discs, it may not be
possible to change to the selected
language.
available languages
Other
Choose a language from the listed languages to set the default subtitle language for BD-
ROM and DVD-Video playback.
Continue to the next screen to set the default subtitle language for BD-ROM and DVD-Video
playback. You can select the language name or enter the code number (see on page 56 for
the code table). If a language not recorded on the BD/DVD is set, one of the recorded
languages is automatically selected and played.
BDMV/DVD-Video Menu Lang.
w/Subtitle Language
available languages
Other
Sets the language of BD-ROM and DVD-VIdeo menus to the same as that set for the subtitle
language.
* For some discs, it may not be
possible to change to the selected
language.
Choose a language from the listed languages to set the default language for BD-ROM and
DVD-Video menus.
Continue to the next screen to set the default menu language for BD-ROM and DVD-Video
menus. You can select the language name or enter the code number (see on page 56 for
the code table). If a language not recorded on the BD/DVD is set, one of the recorded
languages is automatically selected and played.
Subtitle Display
On
Select this to display the subtitles.
Off
Select this if you do not want to display the subtitles. Note that on some discs the subtitles
are displayed by force.
Set Password (Change Password) Register (change) the password for parental lock settings or for unlocking to play DVD-Video with parental lock
feature. For details, see Registering or Changing the password on page 44.
DVD-Video Parental Lock
BDMV Parental Lock
Country Code
Change the player’s parental lock level. For details, see Changing the Parental Lock level for watching DVDs on page 46.
Change the restricted age. For details, see Changing the Age Restriction for watching BD-ROMs on page 45.
Change the Country/Area code. Refer to the Changing the Country/Area code on page 47.
41
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Options
Explanation
06
Output Terminal Priority
Select the terminals for outputting video and audio signals with priority. For details, see Changing the terminals for
outputting video and audio signals (Output Terminal Priority) on page 48.
On Screen Display
On
Select this to display the operation indicators (Play, Stop, etc.) on the TV screen.
Off
Select this if you do not want to display the operation indicators (Play, Stop, etc.) on the TV
screen.
Angle/Secondary Indicator
On
Select this to display the angle mark, secondary video mark and secondary audio mark on
the TV screen (pages 28 and 29).
Off
Select this if you do not want to display the angle mark, secondary video mark and
secondary audio mark on the TV screen.
Hybrid Disc Playback
BD
The BD layer of hybrid discs with two or more layers (BD and DVD or CD) is played.
DVD
The DVD layer of hybrid discs with two or more layers (BD and DVD) is played. If there is no
DVD layer, the BD layer is played.
CD
The CD layer of hybrid discs with two or more layers (BD and CD) is played. If there is no CD
layer, the BD layer is played.
BDMV/BDAV Playback Priority
Auto Power Off
BDMV
BDAV
On
Select this to play the BDMV format on BD-R/RE discs containing both BDMV and BDAV
formats.
Select this to play the BDAV format on BD-R/RE discs containing both BDMV and BDAV
formats.
Select this to turn the power off automatically (the power turns off automatically if no
operation is performed for over 30 minutes).
Off
Select this if you do not want the power to turn off automatically.
Setup Navigator
Start making the settings using the Setup Navigator menu. For details, see Making settings using the Setup Navigator
menu on page 20.
42
En
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Select and set Speakers.
Changing to other language at
language setting
06
Use / to select, then press ENTER.
TOOLS
TOP MENU
ENTER
Note
HOME
MENU
RETURN
• Refer to Language Code Table on page 56.
• If a language not recorded on the BD/DVD is set, one of the
recorded languages is automatically selected and played.
Initial Setup
BD PLAYER
1
Select and set Other.
Use / to select, then press ENTER.
Video Out
Audio Out
Speakers
HDMI
Audio Output Mode
Speaker Setup
Channel Level
ꢀMulti-channel
TOOLS
TOP MENU
ꢀFix
Language
Parental Lock
Options
ENTER
HOME
MENU
RETURN
Setup Navigator
2
Change the language.
2
Select and set Speaker Setup Next Screen.
Use / to change, then press ENTER.
Use / to select, then press ENTER.
TOOLS
TOP MENU
Caution
• This cannot be selected when Audio Output Mode is set to 2
Channel. Change the setting to Multi-channel (page 40).
ENTER
HOME
MENU
RETURN
3
Select the speaker and change the setting.
Use / to select, then use / to change the setting.
TOOLS
TOP MENU
To change the language using numbers
1
Use / to select Number.
ENTER
2
Use the number buttons (0 to 9) to input the number, then
HOME
MENU
RETURN
press ENTER.
Changing the speaker setup
Speaker Setup
BD PLAYER
Set whether or not to use the speakers which are connected to the
AV receiver or amplifier, as well as the size of the speakers. This
setting is only valid for analog audio outputs.
L/R
Large
Yes
C
SL/SR
SBL/SBR
Yes
Yes
Note
• Select Initial Setup from the Home Menu, then press ENTER.
Use [
][
] to select a speaker, then press [
to select speaker option.
][
]
• L/R (front left and right speakers): Small/Large (this setting also
applies to the C, SL/SR and SBL/SBR speakers).
• C (center speaker): Yes/No
• SL/SR (left and right surround speakers): Yes/No
• SBL/SBR (left and right surround back speakers): Yes/No
Closing the speaker settings screen
Press ENTER.
43
En
Download from Www.Somanuals.com. All Manuals Search And Download.
• Auto – Switch the speaker to be adjusted automatically.
Adjusting the output level of the
various speakers (Channel Level)
06
• Manual – Switch the speaker to be adjusted manually.
Caution
Adjust each output level of the different speakers by using test
tones. This setting is only valid for analog audio outputs.
• Test tones are output. Lower the volume of the device connected
to the player.
1
Select and set Speakers.
4
Adjust the output level.
Use / to select, / to adjust.
Use / to select, then press ENTER.
TOOLS
TOP MENU
Channel Level
BD PLAYER
L
C
R
SR
SBR
SBL
SL
SW
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
ENTER
HOME
MENU
RETURN
Initial Setup
BD PLAYER
Use [
][
] to select a speaker, then press [
][
]
Video Out
Audio Out
Speakers
HDMI
Language
Parental Lock
Options
Audio Output Mode
Speaker Setup
ꢀMulti-channel
to adjust the channel level and then press ENTER.
Channel Level
ꢀFix
Note
• When Auto is selected, the speaker cannot be selected with
/.
Setup Navigator
Closing the Channel Level screen
Press ENTER.
2
Select and set Channel Level, then Fix or Variable.
Use / to select, then press ENTER.
Registering or Changing the
password
• Fix – The output level of all the speakers is set to the maximum.
• Variable – The output level of all the speakers is set 6.0 dB lower
than when Fix is selected. From this point, the output levels of
the L, C, R, SL, SR, SBL, SBR and SW speakers can be adjusted
within the range of –6.0 dB to +6.0 dB.
Use this procedure to register or change the code number required
for the Parental Lock settings.
• If you have selected Variable, proceed to step 3.
BD
DVD
AVCHD
CD
Music files
Caution
• This cannot be selected when Audio Output Mode is set to 2
Channel. Change the setting to Multi-channel (page 40).
1
Select and set Parental Lock.
Use / to select, then press ENTER.
3
Select and set the method for switching the speaker to be
adjusted.
TOOLS
TOP MENU
Use / to select, then press ENTER.
TOOLS
TOP MENU
ENTER
HOME
MENU
RETURN
ENTER
HOME
MENU
RETURN
Initial Setup
BD PLAYER
Speaker Setup
BD PLAYER
Video Out
Audio Out
Speakers
HDMI
Language
Parental Lock
Options
Set Password
DVD-Video Parental Lock
BDMV Parental Lock
Country Code
ꢀOff
ꢀ255
ꢀus
Video Out
Audio Out
Speakers
HDMI
Test Tone Switching
Select whether test tone output is
switched automatically or manually.
Language
Parental Lock
Options
Setup Navigator
Auto
Manual
Setup Navigator
2
Select and set Set Password Next Screen.
Use / to select, then press ENTER.
44
En
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Input the password.
Changing the Age Restriction for
watching BD-ROMs
06
Use the number buttons (0 to 9) or / to input the number, then
press ENTER to set.
Use / to move the cursor.
For BD-ROMs containing scenes of violence, for example, watching
can be restricted by setting an age restriction for the BD-ROMs.
BD
DVD
Music files
AVCHD
CD
CLEAR
ENTER
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
1
Select and set Parental Lock.
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
Use / to select, then press ENTER.
DISPLAY POPUP MENU
MENU
TOOLS
TOP MENU
TOOLS
TOP MENU
ENTER
HOME
MENU
ENTER
RETURN
HOME
MENU
RETURN
Initial Setup
BD PLAYER
Initial Setup
BD PLAYER
Video Out
Audio Out
Speakers
HDMI
Set Password
DVD-Video Parental Lock
BDMV Parental Lock
Country Code
ꢀOff
ꢀ255
ꢀus
Video Out
Audio Out
Speakers
HDMI
Language
Parental Lock
Options
Set Password
Enter new password
Language
Parental Lock
Options
Setup Navigator
Setup Navigator
2
Select and set BDMV Parental Lock Next Screen.
Use / to select, then press ENTER.
4
Re-input the password.
Use the number buttons (0 to 9) or / to input the number, then
press ENTER to set.
Use / to move the cursor.
Initial Setup
BD PLAYER
Video Out
Audio Out
Speakers
HDMI
Set Password
Enter new password
Language
Parental Lock
Options
Re-enter
Setup Navigator
To change the code number
Input the previously registered password, then input the new
password.
Note
• We recommend making a note of the password.
• If you forget the password, reset the player to the factory default
setting, then register the password again (page 49).
45
En
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Input the password.
Changing the Parental Lock level
for watching DVDs
06
Use the number buttons (0 to 9) or / to input the number, then
press ENTER to set.
Use / to move the cursor.
Some DVD-Video discs containing scenes of violence, for example,
have Parental Lock levels (check the indications on the disc’s jacket
or elsewhere). To restrict watching these discs, set the player’s level
to the level lower than the discs.
BD
CLEAR
ENTER
DVD
AVCHD
CD
Music files
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
1
Select and set Parental Lock.
Use / to select, then press ENTER.
DISPLAY POPUP MENU
MENU
TOOLS
TOP MENU
TOOLS
TOP MENU
ENTER
ENTER
HOME
MENU
RETURN
HOME
MENU
RETURN
Initial Setup
BD PLAYER
Initial Setup
BD PLAYER
Video Out
Audio Out
Speakers
HDMI
Language
Parental Lock
Options
BDMV Parental Lock
Video Out
Audio Out
Speakers
HDMI
Language
Parental Lock
Options
Set Password
DVD-Video Parental Lock
BDMV Parental Lock
Country Code
ꢀOff
ꢀ255
ꢀus
Enter the password
Setup Navigator
Setup Navigator
4
Change the age.
2
Select and set DVD-Video Parental Lock Next Screen.
Use the number buttons (0 to 9) or / to input the number, then
press ENTER to set.
Use / to select, then press ENTER.
Use / to move the cursor.
Initial Setup
BD PLAYER
Video Out
Audio Out
Speakers
HDMI
BDMV Parental Lock
Age Restriction
Language
Parental Lock
Options
Setup Navigator
Note
• When Age Restriction is set to 255, watching is not restricted.
46
En
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Input the password.
Changing the Country/Area code
06
Use the number buttons (0 to 9) or / to input the number, then
press ENTER to set.
BD
Use / to move the cursor.
DVD
AVCHD
CD
Music files
Note
CLEAR
ENTER
• Refer to Country/Area Code Table on page 56.
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
1
Select and set Parental Lock.
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
Use / to select, then press ENTER.
DISPLAY POPUP MENU
MENU
TOOLS
TOP MENU
TOOLS
TOP MENU
ENTER
HOME
MENU
RETURN
ENTER
HOME
MENU
RETURN
Initial Setup
BD PLAYER
Initial Setup
BD PLAYER
Video Out
Audio Out
Speakers
HDMI
Language
Parental Lock
Options
Set Password
DVD-Video Parental Lock
BDMV Parental Lock
Country Code
ꢀOff
ꢀ255
ꢀus
Video Out
Audio Out
Speakers
HDMI
DVD-Video Parental Lock
Enter the password
Language
Parental Lock
Options
Setup Navigator
Setup Navigator
2
Select and set Country/Area Code.
Use / to select, then press ENTER.
4
Change the level.
Use / to change, then press ENTER to set.
Initial Setup
BD PLAYER
Video Out
Audio Out
Speakers
HDMI
DVD-Video Parental Lock
Level
Off
Language
Parental Lock
Options
Setup Navigator
Note
• The level can be set to Off or between Level1 and Level8. When
set to Off, watching is not restricted.
47
En
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Input the password.
Changing the terminals for
outputting video and audio
signals (Output Terminal Priority)
06
Use the number buttons (0 to 9) or / to input the number, then
press ENTER to set.
Use / to move the cursor.
Set the video and audio terminals to be used.
1
Select and set Options.
Use / to select, then press ENTER.
CLEAR
ENTER
TOOLS
TOP MENU
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
ENTER
DISPLAY POPUP MENU
MENU
HOME
MENU
RETURN
TOOLS
TOP MENU
Initial Setup
BD PLAYER
ENTER
HOME
MENU
RETURN
Video Out
Audio Out
Speakers
HDMI
Language
Parental Lock
Options
Output Terminal Priority
On Screen Display
Angle/Secondary Indicator ꢀOn
Hybrid Disc Playback ꢀBD
BDMV/BDAV Playback Priority ꢀBDAV
Auto Power Off
ꢀOn
Initial Setup
BD PLAYER
ꢀOn
Video Out
Audio Out
Speakers
HDMI
Country Code
Enter the password
Setup Navigator
Language
Parental Lock
Options
2
Select and set Output Terminal Priority Next Screen.
Use / to select, then press ENTER.
Setup Navigator
4
Change the country/area code.
Use / to change, then press ENTER to set.
Initial Setup
BD PLAYER
Video Out
Audio Out
Speakers
HDMI
Language
Parental Lock
Options
Country Code
Code
Number
Setup Navigator
To change the country/area code using
numbers
1
Use / to select Number.
2
Use the number buttons (0 to 9) to input the number, then
press ENTER.
48
En
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Select the terminal for outputting video signals.
• Linear PCM (2-channel) audio signals are output from the audio
terminals other than the one set at Audio, regardless of the
audio format and the player’s settings.
06
Use / to select, then press .
When a digital output is selected for the video output terminal,
Video is fixed at HDMI and cannot be changed.
Restoring all the settings to the
factory default settings
When an analog output is selected for the video output terminal,
Component Video or S-Video/Video can be selected for Video.
TOOLS
TOP MENU
1
2
Check that the player’s power is turned on.
ENTER
When a disc is playing, press to stop playback.
HOME
MENU
Eject the disc from the player.
RETURN
3
While pressing , press STANDBY/ON.
Operate using the buttons on the player’s front panel.
Initial Setup
BD PLAYER
Note
Video Out
Audio Out
Speakers
HDMI
Language
Parental Lock
Options
Output Terminal Priority
• After restoring all the settings to the factory default settings, use
Setup Navigator to reset the player (page 20).
Video
Audio
S-Video/Video
Analog Audio
Setup Navigator
• HDMI – HDMI OUT terminal
• Component Video – COMPONENT VIDEO output terminals
• S-Video/Video – S-VIDEO output terminal or VIDEO output
terminal
The video and audio signals output from the set output terminals are
output synchronously (lip synchronization).
Caution
• If the output terminal you want to select at Video is not
displayed, use the VIDEO SELECT button to switch between
digital and analog output (page 24).
4
Select the terminal for outputting audio signals.
Use / to select, then press ENTER.
• HDMI – HDMI OUT terminal
• Digital Audio – DIGITAL OUT terminal (COAXIAL/OPTICAL)
• Analog Audio – AUDIO OUT (2 ch) terminals or AUDIO OUT
(7.1 ch) terminals
The optimum audio signals for the audio format and the player’s
settings are output from the output terminal(s) set here.
Caution
• When S-Video/Video or Component Video is selected at
Video, no sound will be output if HDMI is selected at Audio (the
warning message shown below is displayed). When listening to
the audio by the HDMI-compatible device, connect to the TV
with the HDMI cable to watch the video (pages 14 and 17).
Audio is not output from HDMI
terminal when [S-Video/Video] or
[Component Video] is selected.
OK to select this setting?
Yes
No
49
En
Download from Www.Somanuals.com. All Manuals Search And Download.
About the audio output settings
06
The audio signals that are output differ according to the audio format recorded on the disc and the player’s settings. Check on the table
below.
1
AUDIO OUT terminal
DIGITAL OUT terminal
HDMI OUT terminal
Not converted to
Audio format
Converted to
2
2
6
6,7,8
linear PCM
2ch
Multi-channel
PCM
Auto
3
linear PCM audio
4,5
audio
BD-ROM Dolby Digital
5.1-channel audio
5.1-channel audio
7.1-channel
Dolby Digital
Dolby Digital Plus
Dolby Digital Plus
Dolby Digital
9
7.1-channel audio
9,10
11
Dolby TrueHD
audio
Dolby TrueHD
DTS Digital
Surround
DTS Digital
Surround
5.1-channel audio
5.1-channel audio
Converted to 2-
channel audio
Converted to 2-
channel audio
DTS-HD High
Resolution Audio
DTS-HD High
Resolution Audio
DTS Digital
Surround
12
12
5.1-channel audio
5.1-channel audio
DTS-HD Master
Audio
DTS-HD Master
13
Audio
Linear PCM
7.1-channel
Converted to 2-
channel audio
9
7.1-channel audio
7.1-channel audio
9,10
audio
BD-R/RE Dolby Digital
Dolby Digital
MPEG-2 AAC
Dolby Digital
MPEG-2 AAC
Converted to 2-
channel audio
Converted to 2-
channel audio
5.1-channel audio
5.1-channel audio
MPEG-2 AAC
MPEG
2-channel audio
Linear PCM
Dolby Digital
DVD-
Video
Dolby Digital
Dolby Digital
Converted to 2-
channel audio
Converted to 2-
channel audio
5.1-channel audio
5.1channel audio
5.1-channel audio
5.1-channel audio
DTS Digital
Surround
DTS Digital
Surround
DTS Digital
Surround
MPEG
2-channel audio
Linear PCM
DVD (VR Dolby Digital
format)
Converted to 2-
channel audio
Converted to 2-
channel audio
Dolby Digital
Dolby Digital
MPEG
2-channel audio
Linear PCM
1. When outputting linear PCM audio signals, if the number of compatible channels of the connected HDMI device is lower, the signals are output with the number of
channels for which the device is compatible.
2. When Audio Output Mode is set to 2 Channel or Multi-channel (page 40).
3. When Dolby Digital Out is set to Dolby Digital PCM, DTS Out is set to DTS PCM, or AAC Out is set to AAC PCM (page 40).
4. When Dolby Digital Out is set to Dolby Digital 1/Dolby Digital 2, DTS Out is set to DTS 1/DTS 2 or AAC Out is set to AAC (page 40).
5. When outputting Dolby Digital or DTS Digital Surround bitstream with settings of Dolby Digital 2 at Dolby Digital Out, DTS 2 at DTS Out, the secondary audio and
interactive audio signals are not mixed for output.
6. When HDMI Audio Out is set to PCM or Auto (page 41).
7. When outputting the bitstream of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD Master Audio, DTS-HD High Resolution Audio or DTS Digital Surround, the
secondary audio and interactive audio signals are not mixed.
8. If the connected HDMI device is not compatible with Dolby TrueHD or Dolby Digital Plus bitstream, the signals are output in Dolby Digital bitstream.
If the connected HDMI device is not compatible with DTS-HD Master Audio or DTS-HD High Resolution Audio, the signals are output in DTS Digital Surround
bitstream.
If the connected HDMI device is not compatible with Dolby Digital or DTS Digital Surround bitstream, the signals are output in linear PCM.
9. Only compatible with 7.1-channel surround back. 6.1-channel surround back is output in 7.1 channels. In other cases, output as audio signals of 5.1-channels or less.
10. When the output video resolution is set to 480i or 480p, the signals may be output in 2 channel, depending on HDMI High-Speed Transmission setting and/or the
connected HDMI device (page 15).
11. When the output video resolution is set to 480i or 480p, the signals may be output in Dolby Digital bitstream, depending on HDMI High-Speed Transmission setting
and/or the connected HDMI device (page 15).
12. DTS Digital Surround signals converted to linear PCM audio signals are output.
13. When the output video resolution is set to 480i or 480p, the signals may be output in DTS Digital Surround bitstream, depending on HDMI High-Speed Transmission
setting and/or the connected HDMI device (page 15).
Caution
• Linear PCM audio signals (2 channels) are output from all terminals other than the ones selected at Audio under Output Terminal
Priority, regardless of the audio format or the player’s settings (pages 20 and 48).
• The audio signals output from the DIGITAL OUT terminals have a sampling frequency of 48 kHz (44.1 kHz for CDs).
• MPEG audio is output in linear PCM.
50
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7
07
Additional information
Troubleshooting
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the
points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If
the trouble cannot be rectified after checking the items below, please contact customer services. In the US, call Toll Free (800) 421-1404.
(Telephone lines are open Monday through Friday 6:00 AM to 4:30 PM (Pacific Time).) In Canada, call Local (905) 479-4411, or Long distance
+1(877) 283-5901. (Telephone lines are open Monday through Friday 9:00 AM to 5:30 PM (EST).)
Playback
Problem
Check
Remedy
Disc does not play.
Is the disc scratched?
Is the disc dirty?
It may not be possible to play scratched discs.
Clean the disc (page 59).
Disc tray opens
automatically.
Is the disc properly set in the disc tray?
• Set the disc with the printed side facing up.
• Set the disc properly in the depression in the disc tray.
Is the region number correct?
The region numbers of discs that can be played on this set are
as shown below (page 10).
• BDs: “A” (or including “A”) and “ALL”
• DVDs: “1” (or including “1”) and “ALL”
Is the player set in a humid place?
There could be condensation inside. Wait for the condensation
to dissipate. Do not set the player near an air-conditioner, etc.
(page 58).
Picture freezes and the front
panel and remote control
buttons stop working.
• Press STOP to stop playback, then restart playback.
• If the playback cannot be stopped, press STANDBY/ON
on the player’s front panel to turn off the power, then turn the
power back on.
• If the power cannot be turned off, press and hold
STANDBY/ON on the player’s front panel for over 5
seconds. The power will turn off.
No picture is displayed or the Is the video cable properly connected?
Insert the cable firmly and all the way in.
picture is not displayed
Is the video cable damaged?
properly.
If the cable is damaged, replace it with a new one.
Is the input setting on the connected TV or AV receiver or
Read the operating instructions of the connected components
and switch to the proper input.
amplifier right?
Are the terminals for outputting video signals properly set?
Press VIDEO SELECT to switch the terminal from which the
video signals are output.
Is the output video resolution properly set?
Depending on the player’s output video resolution, the picture
may not be displayed at all or displayed properly. Use OUTPUT
RESOLUTION to switch to a resolution at which the picture is
displayed properly (page 25).
Is the player connected with an HDMI cable other than a High Press while pressing on the player’s front panel to restore
Speed HDMI™ cable (with a Standard HDMI™ cable)?
the video outputs to the factory default settings. After use
Setup Navigator to reset the player.
There are some BDs for which the picture will only be output
when connected by HDMI cable.
Picture is stretched.
Is the TV’s aspect ratio properly set?
Read the TV’s operating instructions and set the TV’s aspect
ratio properly.
Aspect ratio cannot be
switched.
Is 4:3 Video Out properly set?
• Set 4:3 Video Out properly (page 40).
• When video signals with a resolution of 1080/60i, 1080/60p,
1080/24p or 720/60p are being output from the HDMI OUT
terminal or the COMPONENT VIDEO output terminals, they
may be output in with an aspect ratio of 16:9 even if TV Aspect
Ratio is set to 4:3 (Standard) (page 25).
Sound and picture are not
synchronized.
Is Output Terminal Priority properly set?
Set Output Terminal Priority properly (pages 20 and 48).
51
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Check
Remedy
07
Picture is disturbed during
playback.
• This player supports Macrovision analog copy protection
technology. With some TVs (such as with built-in video deck),
the picture will not be displayed properly when the copy
protected DVD title is played. This is not a malfunction.
Picture is dark.
• If the player and TV are connected via a DVD recorder/video
deck, etc., the picture will not be displayed properly due to
analog copy protection. Connect the player and TV directly.
No picture is displayed or
picture is not output in high
definition when playing BDs.
With some content protected discs, it may not be possible to
output the video signals from the VIDEO output terminals, the
S-VIDEO output terminal or the COMPONENT VIDEO output
terminals. In this case, connect using an HDMI cable
(page 14).
No sound is output.
Sound is disturbed.
Is the disc played back in slow motion?
No sound is output during slow motion play and forward and
reverse scanning.
Is the disc played back in fast forward or fast reverse?
Is the disc scratched?
Is the disc dirty?
The sound may not be output if the disc is scratched.
Clean the disc (page 59).
Is the player properly connected to the other components (AV • Check that you connect the player to the audio output
receiver or amplifier, etc.)?
terminals of a different component, etc.
• Check that you connect the player to the PHONO input
terminals of the AV receiver or amplifier, etc.
Are the connected components (AV receiver or amplifier, etc.) Read the operating instructions of the connected components
properly set?
and check the volume, input, speaker settings, etc.
Are the audio cables properly connected?
Is the audio cable damaged?
Insert the cables firmly and all the way in.
If the cable is damaged, replace it with a new one.
Is the player connected to the TV using an HDMI cable to watch When connecting using component video cables, an S-Video
the picture?
cable or a video cable to watch the picture, it is not possible to
listen to the sound of devices connected with HDMI cables.
Take one of the measures below (pages 14 and 17).
– To watch the picture on a device that is not HDMI
compatible, connect using either an optical digital audio
cable, coaxial digital audio cable or analog audio cables
(7.1 or 2 channels) to listen to the sound.
– To listen to the sound on an HDMI-compatible device,
connect to the TV using an HDMI cable to watch the
picture.
After one of the above measures, use Setup Navigator to reset
the player (page 20).
Is Audio Output Mode properly set?
If Audio Output Mode is set to Multi-channel, the audio
signals may not be output properly from the AUDIO OUT (2
ch) terminals (page 40). Set Audio Output Mode to 2
Channel.
Are the speakers properly set?
Set Speaker Setup properly (page 40).
For some BDs, audio signals are only output from the optical
digital audio output terminal, the coaxial digital audio output
terminal or the HDMI output terminal.
Multi-channel sound is not
output.
Is the AV receiver or amplifier, etc. connected to the HDMI
OUT terminal, the AUDIO OUT (7.1 ch) terminals or DIGITAL or amplifier and check the audio output settings of AV receiver
OUT (COAXIAL/OPTICAL) terminal?
Read the operating instructions of the connected AV receiver
or amplifier.
Is Output Terminal Priority properly set?
Linear PCM (2-channel) audio signals are output from output
terminals other than the one set at Audio under Output
Terminal Priority. Set Output Terminal Priority properly
(page 48).
Is the audio output of the connected AV receiver or amplifier, Read the operating instructions of the connected AV receiver
etc., properly set?
or amplifier and check the audio output settings of AV receiver
or amplifier.
52
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Check
Remedy
07
Multi-channel sound is not
output (continuous).
Is multi-channel sound selected?
Use the menu screen or AUDIO to switch the disc’s sound to
multi-channel.
Is Audio Out set to audio formats supported by the connected • Read the operating instructions of the connected AV receiver
AV receiver or amplifier?
or amplifier and check the supported audio formats.
• Set Audio Out properly (page 40).
Are Audio Output Mode and Speaker Setup properly set? • When the AV receiver or amplifier, etc., is connected to the
AUDIO OUT (7.1 ch) terminals, set Audio Output Mode to
Multi-channel (page 40).
• Set Speaker Setup properly (page 40).
Digital audio signals are not Is Audio Out set to audio formats supported by the connected • Read the operating instructions of the connected AV receiver
output from the DIGITAL
OUT output (COAXIAL/
OPTICAL) terminals (analog
audio signals are output).
AV receiver or amplifier?
or amplifier and check the supported audio formats.
• Set Audio Out properly (page 40).
Noise can be heard when
outputting DTS Digital
Surround signals.
Is the connected AV receiver or amplifier compatible with DTS If an AV receiver or amplifier that is not compatible with DTS
Digital Surround?
Digital Surround is connected to the DIGITAL OUT terminal,
set DTS Out to DTS PCM. Noise will be heard if DTS Out is
set to DTS (page 40).
192 kHz or 96 kHz digital
audio signals cannot be
output from the DIGITAL
OUT (COAXIAL/OPTICAL)
terminals.
It is not possible to output 192 kHz or 96 kHz digital audio
signals from this player’s DIGITAL OUT (COAXIAL/OPTICAL)
terminals. The signals are automatically converted to under 96
kHz for output.
Secondary audio or
interactive audio is not
output.
Is HDMI Audio Out properly set?
Set HDMI Audio Out to PCM (page 41).
Are Dolby Digital Out and DTS Out properly set?
Set Dolby Digital Out to Dolby Digital 1, DTS Out to DTS 1
(page 40).
Sound is fast or slow.
When an HDMI cable is connected, are audio signals being
output from devices connected with cables other than HDMI receiver or amplifier compatible with the PQLS function via
When this player is connected by HDMI cable to a Pioneer AV
cables?
HDMI connection, the PQLS function is activated when playing
a music CD (CD-DA). Because of this, the sound output from
components other than the ones connected by HDMI cable
may be fast or slow. If this happens, set PQLS to Off (page 41).
Files recorded on discs
cannot be played.
Is the disc one that is playable on this player?
Is the file one that is playable on this player?
Check whether the disc is one that can be played on this player
(page 8).
• Check whether the file is one that can be played on this
player (page 10).
• Check whether or not the file is damaged.
Files protected by DRM cannot be played.
Erase the BDMV data (page 24).
Is the file protected by DRM?
A message indicating low
memory (local storage)
appears while playing a BD-
ROM disc.
When connected using an HDMI cable
Problem
Check
Remedy
HDMI indicator does not
light.
Is the video output terminal other than the HDMI OUT terminal The HDMI indicator lights when video signals are being output
selected?
from the HDMI OUT terminal. Press VIDEO SELECT to switch
to the HDMI OUT terminal (page 24).
Is the input of the connected HDMI device properly set?
Is a DVI device connected?
Read the HDMI device’s operating instructions and set the
input properly.
Read the DVI device’s operating instructions and check
whether it is compatible with HDCP.
53
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Check
Remedy
07
No picture is displayed.
Is the HDMI indicator lit?
• If the HDMI indicator is not lit, read the HDMI device’s
operating instructions and switch to the proper input.
• If the HDMI indicator is lit, use OUTPUT RESOLUTION to
switch the output video resolution (page 25).
Are the terminals for outputting video signals properly set?
Is the resolution properly set?
Press VIDEO SELECT to switch the HDMI OUT terminal.
Depending on the output video resolution setting, the picture
may not be output. Use OUTPUT RESOLUTION to switch the
output video resolution (page 25).
Is the HDMI cable properly connected?
• Insert the cable firmly and all the way in.
• With some cables, 1080p video signals cannot be properly
output.
Is a DVI device connected?
Is the HDMI cable damaged?
The picture may not be displayed properly if a DVI device is
connected.
If the cable is damaged, replace it with a new one.
Pictures do not display
properly on the TV.
Change the HDMI Color Space setting (page 41).
No sound is produced.
Are you watching the picture with the TV connected via an
HDMI cable?
If video signals are being output from a terminal other than the
HDMI terminal, no audio signals are output from the HDMI
terminal. Connect to the TV using an HDMI cable and press
VIDEO SELECT to switch to the HDMI output terminal (pages
14, 17 and 24).
Is a DVI device connected?
The sound will not be output from the HDMI OUT terminal if a
DVI device is connected. Connect the device to a DIGITAL OUT
(OPTICAL/COAXIAL) terminal or the AUDIO OUT (2 ch)
terminals.
HDMI Control function does Is the HDMI cable properly connected?
not work.
Connect the HDMI cable properly.
Is the HDMI cable you are using a High Speed HDMI™ cable? Use a High Speed HDMI™ cable. The HDMI Control function
may not work properly if HDMI cable other than a High Speed
HDMI™ cable is used.
Are you connected to the TV using an HDMI cable to watch the If video signals are being output from a terminal other than the
picture?
HDMI terminal, HDMI Control function does not work.
Connect to the TV using an HDMI cable and press VIDEO
SELECT to switch to the HDMI output terminal (pages 14, 17
and 24).
Is HDMI Control set to On on the player?
Set HDMI Control to On on the player (page 41).
Does the connected device support the HDMI Control
function?
• The HDMI Control function will not work with devices
manufactured by companies other than Pioneer, even when
connected using an HDMI cable.
• The HDMI Control function will not work if devices that do not
support the HDMI Control function or devices manufactured
by companies other than Pioneer are connected between the
HDMI Control-compatible device and the player.
• The HDMI Control function may not work with certain Flat
Panel TVs.
Also refer to the operating instructions of the connected
device.
Is HDMI Control set to On on the connected device?
Set HDMI Control to On on the connected device. The HDMI
Control function works when HDMI Control is set to On for all
the devices connected by HDMI cable.
Once connections and settings of all the devices are finished,
be sure to check that the player’s picture is output to the Flat
Panel TV. (Also check after changing the connected devices
and connecting and/or disconnecting HDMI cables.) If the
player’s picture is not being output to the Flat Panel TV, the
HDMI Control function may not work properly.
For details, refer to the operating instructions of the connected
device.
Are multiple players connected?
The HDMI Control function may not work if three or more
players, including this player, are connected by HDMI cable.
54
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
07
Problem
Check
Remedy
The power turns off
automatically.
Is Auto Power Off set to On?
If Auto Power Off is set to On, the power turns off
automatically if no operation is performed for over 30 minutes
(page 42).
Is HDMI Control set to On?
The player’s power may turn off together with the power of the
connected TV. If you do not want the player’s power to turn off
when the TV’s power is turned off, set HDMI Control to Off
(page 41).
The power turns on
automatically.
Is HDMI Control set to On?
The player’s power may turn on together with the power of the
connected TV. If you do not want the player’s power to turn on
when the TV’s power is turned on, set HDMI Control to Off
(page 41).
Inputs of connected TV and Is HDMI Control set to On?
AV system, switches
automatically.
The inputs of the connected TV or AV system (AV receiver or
amplifier, etc.) may automatically switch to the player when
playback starts on the player or the menu screen (Home Media
Gallery, etc.) is displayed. If you do not want the inputs of the
connected TV and/or AV system (AV receiver or amplifier, etc.)
to switch automatically, set HDMI Control to Off (page 41).
Player cannot be operated
with remote control.
Is an AV receiver or amplifier connected to the CONTROL IN Operate with the remote control of the device connected to the
terminal on the player’s rear panel? CONTROL IN terminal.
Are you operating the remote control from a point too far away Operate from within 23 feet of the remote control sensor.
from the player?
Are the batteries dead?
Settings you have made have • Have you disconnected the power cord while the player’s
Replace the batteries (page 7).
If the power cord is disconnected or there is a power failure
while the player’s power is on, the settings you have made may
be cleared. Always press STANDBY/ON on the player’s
front panel or STANDBY/ON on the remote control and
check that POWER OFF has turned off from the player’s front
panel display before disconnecting the power cord. Be
particularly careful when the power cord is connected to the
AC outlet on another device because the player turns off in
conjunction with the device. We recommend plugging the
power cord into a wall outlet whenever possible.
been cleared.
power was on?
• Has there been a power failure?
After a disc is inserted,
Loading stays displayed and
playback does not start.
Are there too many files recorded on the disc?
When a disc on which files are recorded is inserted, depending
on the number of files recorded on the disc, loading may take
several dozen minutes.
is displayed in file names,
etc.
The characters that cannot be displayed on this player are
displayed in .
The DVD layer of BD and DVD Is Hybrid Disc Playback properly set?
Set Hybrid Disc Playback to DVD (page 42).
hybrid discs cannot be
played.
The CD layer of BD and CD Is Hybrid Disc Playback properly set?
Set Hybrid Disc Playback to CD (page 42).
hybrid discs cannot be
played.
The Hybrid Disc Playback
setting cannot be changed
(displayed in gray).
Is a disc set in the disc tray?
Is a disc set in the disc tray?
The Hybrid Disc Playback setting cannot be changed when a
disc is set. Remove the disc, then change the setting.
BDMV/BDAV Playback
Priority setting cannot be
changed (displayed in gray).
The BDMV/BDAV Playback Priority setting cannot be
changed when a disc is set. Remove the disc, then change the
setting.
55
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code Table and Country/Area Code Table
07
Language Code Table
Language name (language code), input code
Japanese (ja/jpn), 1001
English (en/eng), 0514
French (fr/fra), 0618
German (de/deu), 0405
Italian (it/ita), 0920
Spanish (es/spa), 0519
Chinese (zh/zho), 2608
Dutch (nl/nld), 1412
Portuguese (pt/por), 1620
Swedish (sv/swe), 1922
Russian (ru/rus), 1821
Korean (ko/kor), 1115
Greek (el/ell), 0512
Dzongkha (dz/dzo), 0426
Esperanto (eo/epo), 0515
Estonian (et/est), 0520
Basque (eu/eus), 0521
Persian (fa/fas), 0601
Finnish (fi/fin), 0609
Fijian (fj/fij), 0610
Faroese (fo/fao), 0615
Frisian (fy/fry), 0625
Kirghiz (ky/kir), 1125
Latin (la/lat), 1201
Lingala (ln/lin), 1214
Lao (lo/lao), 1215
Lithuanian (lt/lit), 1220
Latvian (lv/lav), 1222
Malagasy (mg/mlg), 1307
Maori (mi/mri), 1309
Macedonian (mk/mkd), 1311
Malayalam (ml/mal), 1312
Mongolian (mn/mon), 1314
Moldavian (mo/mol), 1315
Marathi (mr/mar), 1318
Malay (ms/msa), 1319
Maltese (mt/mlt), 1320
Burmese (my/mya), 1325
Nauru (na/nau), 1401
Nepali (ne/nep), 1405
Norwegian (no/nor), 1415
Occitan (oc/oci), 1503
Oromo (om/orm), 1513
Oriya (or/ori), 1518
Panjabi (pa/pan), 1601
Polish (pl/pol), 1612
Pushto (ps/pus), 1619
Quechua (qu/que), 1721
Rhaeto-Romance (rm/roh), 1813
Rundi (rn/run), 1814
Sinhalese (si/sin), 1909
Slovak (sk/slk), 1911
Slovenian (sl/slv), 1912
Samoan (sm/smo), 1913
Shona (sn/sna), 1914
Somali (so/som), 1915
Albanian (sq/sqi), 1917
Serbian (sr/srp), 1918
Swati (ss/ssw), 1919
Sotho, Southern (st/sot), 1920
Sundanese (su/sun), 1921
Swahili (sw/swa), 1923
Tamil (ta/tam), 2001
Telugu (te/tel), 2005
Tajik (tg/tgk), 2007
Irish (ga/gle), 0701
Scots-Gaelic (gd/gla), 0704
Galician (gl/glg), 0712
Guarani (gn/grn), 0714
Gujarati (gu/guj), 0721
Hausa (ha/hau), 0801
Hindi (hi/hin), 0809
Croatian (hr/hrv), 0818
Hungarian (hu/hun), 0821
Armenian (hy/hye), 0825
Interlingua (ia/ina), 0901
Interlingue (ie/ile), 0905
Inupiaq (ik/ipk), 0911
Indonesian (in/ind), 0914
Icelandic (is/isl), 0919
Hebrew (iw/heb), 0923
Yiddish (ji/yid), 1009
Javanese (jw/jav), 1023
Georgian (ka/kat), 1101
Kazakh (kk/kaz), 1111
Kalaallisut (kl/kal), 1112
Khmer (km/khm), 1113
Kannada (kn/kan), 1114
Kashmiri (ks/kas), 1119
Kurdish (ku/kur), 1121
Afar (aa/aar), 0101
Abkhazian (ab/abk), 0102
Afrikaans (af/afr), 0106
Amharic (am/amh), 0113
Arabic (ar/ara), 0118
Assamese (as/asm), 0119
Aymara (ay/aym), 0125
Azerbaijani (az/aze), 0126
Bashkir (ba/bak), 0201
Belarusian (be/bel), 0205
Bulgarian (bg/bul), 0207
Bihari (bh/bih), 0208
Bislama (bi/bis), 0209
Bengali (bn/ben), 0214
Tibetan (bo/bod), 0215
Breton (br/bre), 0218
Catalan (ca/cat), 0301
Corsican (co/cos), 0315
Czech (cs/ces), 0319
Welsh (cy/cym), 0325
Danish (da/dan), 0401
Thai (th/tha), 2008
Tigrinya (ti/tir), 2009
Turkmen (tk/tuk), 2011
Tagalog (tl/tgl), 2012
Tswana (tn/tsn), 2014
Tonga (Tonga Islands) (to/ton), 2015
Turkish (tr/tur), 2018
Tsonga (ts/tso), 2019
Tatar (tt/tat), 2020
Twi (tw/twi), 2023
Ukrainian (uk/ukr), 2111
Urdu (ur/urd), 2118
Uzbek (uz/uzb), 2126
Vietnamese (vi/vie), 2209
Volapük (vo/vol), 2215
Wolof (wo/wol), 2315
Xhosa (xh/xho), 2408
Yoruba (yo/yor), 2515
Zulu (zu/zul), 2621
Romanian (ro/ron), 1815
Kinyarwanda (rw/kin), 1823
Sanskrit (sa/san), 1901
Sindhi (sd/snd), 1904
Sango (sg/sag), 1907
Serbo-Croatian (sh/scr), 1908
Country/Area Code Table
Country/Area name, input code, Country/Area code
Anguilla, 0109, ai
Antigua and Barbuda, 0107, ag
Argentina, 0118, ar
Armenia, 0113, am
Australia, 0121, au
Austria, 0120, at
Azerbaijan, 0126, az
Bahamas, 0219, bs
Barbados, 0202, bb
Belarus, 0225, by
Belgium, 0205, be
Belize, 0226, bz
Bermuda, 0213, bm
Brazil, 0218, br
Bulgaria, 0207, bg
Canada, 0301, ca
Cayman Islands, 1125, ky
Chile, 0312, cl
China, 0314, cn
Dominican Republic, 0415, do
Liechtenstein, 1209, li
Lithuania, 1220, lt
Luxembourg, 1221, lu
Macedonia, the Former Yugoslav
Republic of, 1311, mk
Malaysia, 1325, my
San Marino, 1913, sm
Singapore, 1907, sg
Slovakia, 1911, sk
Slovenia, 1909, si
Spain, 0519, es
Suriname, 1918, sr
Sweden, 1905, se
Switzerland, 0308, ch
Taiwan, Province of China, 2023, tw
Tajikistan, 2010, tj
Estonia, 0505, ee
Finland, 0609, fi
France, 0618, fr
Georgia, 0705, ge
Germany, 0405, de
Greece, 0718, gr
Greenland, 0712, gl
Grenada, 0704, gd
Guyana, 0725, gy
Haiti, 0820, ht
Hong Kong, 0811, hk
Hungary, 0821, hu
Iceland, 0919, is
India, 0914, in
Indonesia, 0904, id
Ireland, 0905, ie
Israel, 0912, il
Italy, 0920, it
Jamaica, 1013, jm
Japan, 1016, jp
Kazakhstan, 1126, kz
Korea, Republic of, 1118, kr
Kyrgyzstan, 1107, kg
Latvia, 1222, lv
Malta, 1320, mt
Mexico, 1324, mx
Moldova, Republic of, 1304, md
Monaco, 1303, mc
Montserrat, 1319, ms
Netherlands, 1412, nl
New Zealand, 1426, nz
Norway, 1415, no
Pakistan, 1611, pk
Peru, 1605, pe
Philippines, 1608, ph
Poland, 1612, pl
Portugal, 1620, pt
Puerto Rico, 1618, pr
Romania, 1815, ro
Russian Federation, 1821, ru
Saint Kitts and Nevis, 1114, kn
Saint Lucia, 1203, lc
Saint Vincent and the Grenadines, 2203, vc
Thailand, 2008, th
Trinidad and Tobago, 2020, tt
Tunisia, 2014, tn
Turkey, 2018, tr
Turkmenistan, 2013, tm
Turks and Caicos Islands, 2003, tc
Ukraine, 2101, ua
United Kingdom, 0702, gb
United States, 2119, us
Uruguay, 2125, uy
Uzbekistan, 2126, uz
Venezuela, 2205, ve
Virgin Islands, British, 2207, vg
Colombia, 0315, co
Croatia, 0818, hr
Cyprus, 0325, cy
Czech Republic, 0326, cz
Denmark, 0411, dk
Dominica, 0413, dm
56
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
07
Model
BDP-51FD
Type
Blu-ray Disc PLAYER
Rated voltage
Rated frequency
Power consumption
Power consumption (standby)
Weight
AC 120 V
60 Hz
34 W
0.5 W
5.6 kg (12 lb 6 oz)
External dimensions (including projecting parts)
420 mm (W) x 124 mm (H) x 361 mm (D)
9
15
1
(16 /16 in. (W) x 4 /16 in. (H) x 14 /4 in. (D))
+5 °C to +35 °C (+41 °F to +95 °F)
5 % to 85 % (no condensation)
Tolerable operating temperature
Tolerable operating humidity
Video outputs
Video
1 set, RCA jack (1.0 Vp-p (75 Ω))
S-Video
1 set, S-Video jack:
Y (luminance): 1.0 Vp-p (75 Ω)
C (color): 0.286 Vp-p (75 Ω)
Component video
1 set, RCA jacks:
Y: 1.0 Vp-p (75 Ω)
PB, PR: 0.7 Vp-p (75 Ω)
HDMI
1 set, 19-pin (5V, 150 mA)
Audio outputs
2-channel (stereo)
Number of channels: 2, RCA jacks
7.1-channel (multi-channel: front left/ Number of channels: 8, RCA jacks
right, surround left/right, center,
surround back left/right, subwoofer)
Audio output level
Frequency response
S/N ratio
200 mVrms (1 kHz, –20 dB)
4 Hz to 88 kHz (192 kHz sampling)
115 dB
Dynamic range
103 dB
Total harmonic distortion
Wow & flutter
0.0015 %
Below measurable limits ( 0.001 % W. PEAK)
1 set, Optical digital jack
1 set, RCA jack
Digital audio outputs Optical
Coaxial
Control
Input
1 set, Minijack (3.5 ø)
Note
• The specifications and design of this product are subject to change without notice.
®
• This product includes FontAvenue fonts licensed by NEC Corporation. FontAvenue is a registered trademark of NEC Corporation.
57
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Condensation
Cautions on use
07
If the player is moved suddenly from a cold place into a warm room
(in winter, for example) or if the temperature in the room in which
the player is installed rises suddenly due to a heater, etc., water
droplets (condensation) may form inside (on operating parts and the
lens). When condensation is present, the player will not operate
properly and playback is not possible. Let the player stand at room
temperature for 1 or 2 hours with the power turned on (the time
depends on the extent of condensation). The water droplets will
dissipate and playback will become possible.
Moving the player
If you need to move this unit, first remove the disc if there’s one
loaded, and close the disc tray. Next, press STANDBY/ON to
switch the power to standby, checking that the POWER OFF
indication on the front panel display goes off. Wait at least 10
seconds. Lastly, disconnect the power cord.
Condensation can also occur in the summer if the player is exposed
to the direct wind from an air-conditioner. If this happens, move the
player to a different place.
Never lift or move the unit during playback — discs rotate at a high
speed and may be damaged.
Place of installation
Cleaning the player
Select a stable place near the TV and AV system to which the unit is
connected.
Normally, wipe the player with a soft cloth. For tough dirt, apply
some neutral detergent diluted in 5 to 6 parts water to a soft cloth,
wring out thoroughly, wipe off the dirt, then wipe again with a dry
cloth.
Do not place the player on top of a TV or color monitor. Keep it away
from cassette decks or other components easily affected by
magnetism.
Note that getting alcohol, thinner, benzene or insecticide on the
player could cause the print and coating to peel off. Also, avoid
leaving rubber or vinyl products in contact with the player for long
periods of time, as this could damage the cabinet.
Avoid the following types of places:
• Places exposed to direct sunlight
• Humid or poorly ventilated places
• Extremely hot or cold places
When using chemical-impregnated wipes, etc., read the wipe’s
cautions carefully.
• Places subject to vibration
Unplug the power cord from the power outlet when cleaning the
player.
• Dusty places
• Places exposed to soot, steam or heat (in kitchens, etc.)
Caution for when the unit is
installed in a rack with a glass
door
Do not place objects on top
Do not place objects on top of the player.
Do not obstruct the ventilation holes
Do not use the player on a shaggy rug, bed, or sofa, and do not cover
the player with a cloth, etc. Doing so will prevent heat dissipation
and could lead to damage.
Do not press the OPEN/CLOSE on the remote control to open the
disc tray while the glass door is closed. The door will hamper the
movement of the disc tray, and the unit could be damaged.
Keep away from heat
Do not place the player on top of an amplifier or other device
generating heat. When installing in a rack, to avoid the heat
generated by the amplifier and other devices, place it on a shelf
below the amplifier whenever possible.
Cleaning the pickup lens
The player’s lens should not become dirty in normal use, but if for
some reason it should malfunction due to dust or dirt, consult your
nearest Pioneer-authorized service center. Although lens cleaners
for players are commercially available, we advise against using
them since some may damage the lens.
Turn the power off when not
using the player
Depending on the conditions of the TV broadcast signals, striped
patterns may appear on the screen when the TV is turned on while
the player’s power is turned on. This is not a malfunction with the
player or TV. If this happens, turn the player’s power off. In the same
way, noise may be heard in the sound of a radio.
58
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Handling discs
Glossary
07
Do not use damaged (cracked or warped) discs.
Do not scratch the disc’s signal surface or let it get dirty.
Do not load more than one disc into the player at a time.
Aspect ratio
The ratio of a TV screen’s width to its height. Conventional TVs have
an aspect ratio of 4:3, while high definition (HD) and widescreen TVs
have an aspect ratio of 16:9.
Do not glue paper or put stickers onto the disc, or use a pencil, ball-
point pen or other sharp-tipped writing instrument. These could all
damage the disc.
Audio language
Multiple audio tracks, for example the original sound and the
dubbed sound, can be recorded on BD-ROM or DVD-Video discs. Up
to 32 languages (32 audio tracks) can be recorded on BD-ROM
discs, up to 8 languages (8 audio tracks) on DVD-Video discs, so you
can select the desired language when watching the disc.
Storing discs
Always store discs in their cases, and place the cases vertically,
avoiding places exposed to high temperature or humidity, direct
sunlight or extremely low temperatures.
AVCHD (Advanced Video Codec High
Definition)
The AVCHD is a high definition (HD) digital video camera recorder
format recording high-definition onto certain media by using highly
efficient codec technologies.
Be sure to read the cautions included with the disc.
Cleaning discs
It may not be possible to play the disc if there are fingerprints or dust
on it. In this case, using a cleaning cloth, etc., to wipe the disc gently
from the center toward the outer edge. Do not use a dirty cleaning
cloth.
BD-J
With BD-ROMs, it is possible to use Java applications to create
highly interactive titles, for example including games.
Do not use benzene, thinner or other volatile chemicals. Also do not
use record spray or antistatic agents.
For tough dirt, apply some water to a soft cloth, wring out
thoroughly, wipe off the dirt, then wipe off the moisture with a dry
cloth.
Java and all Java-based trademarks and logos are trademarks or
registered trademarks of Sun Microsystems, Inc., in the U.S. and
other countries.
Specially shaped discs
Specially shaped discs (heart-shaped, hexagonal, etc.) cannot be
used on this player. Never use such discs, as they will damage the
player.
BDAV
Of the BD format, the Audio Visual Format Specifications for HD
digital broadcast recording is referred to as BDAV on this player and
in this operating instructions.
BDMV
Of the BD format, the Audio Visual Format Specifications designed
for pre-packaged high definition (HD) movie contents is referred to
as BDMV on this player and in this operating instructions.
Condensation on discs
If the disc is moved suddenly from a cold place into a warm room (in
winter, for example), water droplets (condensation) may form on the
disc surface. Discs will not play properly if there is condensation on
them. Carefully wipe off the water droplets from the disc surface
before using the disc.
Component video output
This video output terminal provides clearer pictures when
connected to a TV equipped with component inputs. Component
video signals consist of three signals, Y, PB and PR.
Composite video output
Signals mixing the luminance signal (Y) and the color signal (C) so
they can be transferred on a single cord are output from this
terminal.
59
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Deep Color
HDMI (High-Definition Multimedia
Interface)
A digital interface standard for next-generation TVs expanding the
DVI (Digital Video Interface) terminal used for example for computer
displays. It allows transfer of non-compressed digital video and
audio signals (Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-
HD Master Audio, DTS-HD High Resolution Audio, DTS Digital
Surround, MPEG-2 AAC, linear PCM, etc.) with a single connector.
07
This is one of the capabilities of HDMI™. The players supporting
Deep Color can transmit a video signal with a color bit depth of
greater than 8 bits per color component. Subtle color gradations
can be reproduced when connected to a TV that supports Deep
Color.
Dolby Digital
Dolby Digital is an audio format to record the sound in up to 5.1
channels with a fraction of the amount of data as compared to linear
PCM audio signals.
Interactive audio
The audio signals recorded in the titles of BD-ROMs. They include
for example the clicking sound made when the menu screen is
operated.
Dolby Digital Plus
Dolby Digital Plus is an audio format for high-definition media. Built
on Dolby Digital, it combines the efficiency and flexibility to provide
high quality multi-channel audio. With BD-ROMs, up to 7.1
channels of digital sound can be recorded.
Interlaced scan
With this method, one picture is displayed by scanning it twice. The
odd lines are displayed in the first pass, the even lines are displayed
in the second, to form a single picture (frame). Interlaced scan is
indicated in this player and operating instructions by an “i” after the
resolution value (for example, 480i).
Dolby TrueHD
Dolby TrueHD is an audio format using lossless coding. With BD-
ROMs, up to 8 channels can be recorded at 96 kHz/24 bits, or up to
6 channels at 192 kHz/24 bits.
Linear PCM
This is referred as the audio signals that are not compressed,
frequently used for DVD-Video discs containing musicals or music
concerts. This can also be indicated “48 kHz/16 bit”, “96 kHz”, etc.
DRM
A technology for protecting copyrighted digital data. Digitized
movies, images and music retain the same quality even when they
are copied or transferred repeatedly. DRM is a technology for
restricting the distribution or playback of such digital data without
the authorization of the copyright holder.
MPEG (Moving Picture Experts Group)
The name of a family of standards used to encode video and audio
signals in a digital compressed format. The video encoding
standards include MPEG-1 Video, MPEG-2 Video, MPEG-4 Visual,
MPEG-4 AVC, etc. The audio encoding standards include MPEG-1
Audio, MPEG-2 Audio, MPEG-2 AAC, etc.
DTS Digital Surround
DTS Digital Surround is an audio format to record 48 kHz/24 bits
audio signals in 5.1 channels.
Multi angle
Up to 9 camera angles can be recorded simultaneously on BD-ROM
or DVD-Video discs, letting you watch the same scene from different
angles.
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is an audio format using lossy
coding. It can record 7.1 channels at 96 kHz/24 bits.
DTS-HD Master Audio
DTS-HD Master Audio is an audio format using lossless coding.
With BD-ROMs, 7.1 channels can be recorded at 96 kHz/24 bits, or
5.1 channels at 192 kHz/24 bits.
Parental Lock
Playback of the contents of some BD-ROM or DVD-Video discs can
be restricted, for example for discs containing scenes of violence.
With BD-ROM discs, an age restriction can be set to restrict
playback. Playing DVD-Video title can be restricted by setting the
parental lock level.
Dynamic range
This refers to the difference between the maximum and minimum
level of the sound. The dynamic range is measured in units of
decibels (dB).
Picture-in-Picture (P-in-P)
This is a function for superimposing a sub video on the main video.
Some BD-ROMs include secondary video, which can be
superimposed on the primary video.
When the dynamic range is compressed (Audio DRC), the minimum
signal level is increased and the maximum signal level decreased.
This way, the volume of loud sounds such as explosions is reduced,
while the sounds with a low level, such as human voices, are easier
to listen to.
Progressive scan
With this method, one picture is consisted of a single picture,
without dividing it in two pictures. Progressive scan provides clear
pictures with no flicker, in particular for still pictures that contain
much text, graphics, or horizontal lines. Progressive scan is
indicated in this player and operating instructions by a “p” after the
resolution value (for example, 480p).
Frames and fields
A frame is the unit for one of the still pictures which compose
motion pictures. One frame consists of a picture of odd lines and a
picture of even lines called fields in video signal with interlaced scan
method (480i, 1080i, etc.).
Region number
HDCP (High-bandwidth Digital Content
Protection)
A technology for protecting copyrights that encrypts digital video
signals.
A number assigned to Blu-ray Disc Players, BD-ROM and DVD-
Video discs according to the region in which they are sold. A disc
can be played if the region numbers indicated on the disc include
the number set for the player or if “ALL” is indicated.
60
En
Download from Www.Somanuals.com. All Manuals Search And Download.
S-Video output
An output terminal for transmitting separate luminance (Y) and
color (C) signals over a single cord. It offers clearer pictures than the
composite video output.
07
Secondary audio
Some BD-ROMs include sub audio streams mixed with the main
audio. These sub audio streams are called “secondary audio”. On
some discs this secondary audio is recorded as the audio for the
secondary video.
Secondary video
Some BD-ROMs include sub videos superimposed on the main
videos using the Picture-in-Picture function. These sub videos are
called “secondary video”.
Subtitle language
This refers to the language of the subtitles often used on movies. Up
to 255 languages (255 types of subtitles) can be recorded on BD-
ROM discs, 32 languages (32 types of subtitles) on DVD-Video discs,
so you can select the desired subtitle when watching the disc.
VC-1
A video codec developed by Microsoft and standardized by the
Society of Motion Picture and Television Engineers (SMPTE). Some
BDs include videos encoded in this codec.
61
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Licenses
07
The licenses for the software used on this player are shown below.
libxml2
The MIT License
Copyright © <year> <copyright holders>
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit
persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE
FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH
THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
OpenSSL
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit.
See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-
OpenSSL License
Copyright © 1998-2007 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the
OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission.
For written permission, please contact [email protected].
5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit (http://www.openssl.org/)"
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young ([email protected]).This product includes software written by Tim Hudson ([email protected]).
Original SSLeay License
Copyright © 1995-1998 Eric Young ([email protected])
All rights reserved.
This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this
distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright
terms except that the holder is Tim Hudson ([email protected]).
Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given
attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided
with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software
The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product
includes software written by Tim Hudson ([email protected])"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under
another distribution licence [including the GNU Public Licence.]
zlib
FreeType2
The FreeType Project LICENSE
2006-Jan-27 Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg
62
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
07
The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which
rely on, or relate to, the FreeType Project.
This license applies to all files found in such packages, and which do not fall under their own explicit license. The license affects thus the FreeType font engine, the test
programs, documentation and makefiles, at the very least.
This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage inclusion and use of free software in commercial and
freeware products alike. As a consequence, its main points are that:
•
•
•
We don't promise that this software works. However, we will be interested in any kind of bug reports.('as is' distribution)
You can use this software for whatever you want, in parts or full form, without having to pay us.('royalty-free' usage)
You may not pretend that you wrote this software. If you use it, or only parts of it, in a program, you must acknowledge somewhere in your documentation that you
have used the FreeType code.('credits')
We specifically permit and encourage the inclusion of this software, with or without modifications, in commercial products. We disclaim all warranties covering The
FreeType Project and assume no liability related to The FreeType Project.
Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this license. We thus encourage you to use the following text:
Please replace <year> with the value from the FreeType version you actually use.
Legal Terms
0. Definitions
Throughout this license, the terms 'package', 'FreeType Project', and 'FreeType archive' refer to the set of files originally distributed by the authors (David Turner, Robert
Wilhelm, and Werner Lemberg) as the 'FreeType Project', be they named as alpha, beta or final release.
'You' refers to the licensee, or person using the project, where 'using' is a generic term including compiling the project's source code as well as linking it to form a
'program' or 'executable'. This program is referred to as 'a program using the FreeType engine'.
This license applies to all files distributed in the original FreeType Project, including all source code, binaries and documentation, unless otherwise stated in the file
in its original, unmodified form as distributed in the original archive. If you are unsure whether or not a particular file is covered by this license, you must contact us
to verify this.
The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified below.
1. No Warranty
THE FREETYPE PROJECT IS PROVIDED 'AS IS' WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE
LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.
2. Redistribution
This license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute, perform, compile, display, copy, create derivative works of,
distribute and sublicense the FreeType Project (in both source and object code forms) and derivative works thereof for any purpose; and to authorize others to exercise
some or all of the rights granted herein, subject to the following conditions:
•
Redistribution of source code must retain this license file ('FTL.TXT') unaltered; any additions, deletions or changes to the original files must be clearly indicated
in accompanying documentation. The copyright notices of the unaltered, original files must be preserved in all copies of source files.
Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of the FreeType Team, in the distribution
documentation. We also encourage you to put an URL to the FreeType web page in your documentation, though this isn't mandatory.
•
These conditions apply to any software derived from or based on the FreeType Project, not just the unmodified files. If you use our work, you must acknowledge us.
However, no fee need be paid to us.
3. Advertising
Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without specific prior
written permission.
We suggest, but do not require, that you use one or more of the following phrases to refer to this software in your documentation or advertising materials: 'FreeType
Project', 'FreeType Engine', 'FreeType library', or 'FreeType Distribution'.
As you have not signed this license, you are not required to accept it. However, as the FreeType Project is copyrighted material, only this license, or another one
contracted with the authors, grants you the right to use, distribute, and modify it. Therefore, by using, distributing, or modifying the FreeType Project, you indicate
that you understand and accept all the terms of this license.
4. Contacts
There are two mailing lists related to FreeType:
•
Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution. If you are looking for support, start in
this list if you haven't found anything to help you in the documentation.
•
Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc.
Our home page can be found at
libpng
COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:
If you modify libpng you may insert additional notices immediately following this sentence.
libpng versions 1.2.6, August 15, 2004, through 1.2.26, April 2, 2008, are Copyright © 2004, 2006-2008 Glenn Randers-Pehrson, and are distributed according to the same
disclaimer and license as libpng-1.2.5 with the following individual added to the list of Contributing Authors
Cosmin Truta
libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright © 2000-2002 Glenn Randers-Pehrson, and are distributed according to the same disclaimer
and license as libpng-1.0.6 with the following individuals added to the list of Contributing Authors
Simon-Pierre Cadieux
Eric S. Raymond
Gilles Vollant
and with the following additions to the disclaimer:
There is no warranty against interference with your enjoyment of the library or against infringement. There is no warranty that our efforts or the library will fulfill any
of your particular purposes or needs. This library is provided with all faults, and the entire risk of satisfactory quality, performance, accuracy, and effort is with the user.
libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright © 1998, 1999 Glenn Randers-Pehrson, and are distributed according to the same
disclaimer and license as libpng-0.96, with the following individuals added to the list of Contributing Authors:
Tom Lane
Glenn Randers-Pehrson
Willem van Schaik
63
En
Download from Www.Somanuals.com. All Manuals Search And Download.
libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright © 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license as libpng-
0.88, with the following individuals added to the list of Contributing Authors:
07
John Bowler
Kevin Bracey
Sam Bushell
Magnus Holmgren
Greg Roelofs
Tom Tanner
libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright © 1995, 1996 Guy Eric Schalnat, Group 42, Inc.
For the purposes of this copyright and license, "Contributing Authors" is defined as the following set of individuals:
Andreas Dilger
Dave Martindale
Guy Eric Schalnat
Paul Schmidt
Tim Wegner
The PNG Reference Library is supplied "AS IS". The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without limitation,
the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc. assume no liability for direct, indirect, incidental, special,
exemplary, or consequential damages, which may result from the use of the PNG Reference Library, even if advised of the possibility of such damage.
Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any purpose, without fee, subject to the following restrictions:
1. The origin of this source code must not be misrepresented.
2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source.
3. This Copyright notice may not be removed or altered from any source or altered source distribution.
The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the use of this source code as a component to supporting the PNG file format
in commercial products. If you use this source code in a product, acknowledgment is not required but would be appreciated.
A "png_get_copyright" function is available, for convenient use in "about" boxes and the like: printf("%s",png_get_copyright(NULL));Also, the PNG logo (in PNG format, of
course) is supplied in the files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31).
Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certification mark of the Open Source Initiative.
Glenn Randers-Pehrson
glennrp at users.sourceforge.net
2-Apr-08
libjpg
The Independent JPEG Group's JPEG software
README for release 6b of 27-Mar-1998
This distribution contains the sixth public release of the Independent JPEG Group's free JPEG software. You are welcome to redistribute this software and to use it for any
purpose, subject to the conditions under LEGAL ISSUES, below.
Serious users of this software (particularly those incorporating it into larger programs) should contact IJG at [email protected] to be added to our electronic mailing
list. Mailing list members are notified of updates and have a chance to participate in technical discussions, etc.
This software is the work of Tom Lane, Philip Gladstone, Jim Boucher, Lee Crocker, Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi, Guido Vollbeding, Ge'
Weijers, and other members of the Independent JPEG Group.
IJG is not affiliated with the official ISO JPEG standards committee.
DOCUMENTATION ROADMAP
This file contains the following sections:
OVERVIEW
LEGAL ISSUES
REFERENCES
ARCHIVE LOCATIONS
RELATED SOFTWARE
FILE FORMAT WARS
TO DO
General description of JPEG and the IJG software.
Copyright, lack of warranty, terms of distribution.
Where to learn more about JPEG.
Where to find newer versions of this software.
Other stuff you should get.
Software *not* to get.
Plans for future IJG releases.
Other documentation files in the distribution are:
User documentation:
install.doc
usage.doc
How to configure and install the IJG software.
Usage instructions for cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom.
*.1 Unix-style man pages for programs (same info as usage.doc).
wizard.doc
change.log
Advanced usage instructions for JPEG wizards only.
Version-to-version change highlights.
Programmer and internal documentation:
libjpeg.doc
example.c
structure.doc
filelist.doc
How to use the JPEG library in your own programs.
Sample code for calling the JPEG library.
Overview of the JPEG library's internal structure.
Road map of IJG files.
coderules.doc
Coding style rules --- please read if you contribute code.
Please read at least the files install.doc and usage.doc. Useful information can also be found in the JPEG FAQ (Frequently Asked Questions) article. See ARCHIVE
LOCATIONS below to find out where to obtain the FAQ article.
If you want to understand how the JPEG code works, we suggest reading one or more of the REFERENCES, then looking at the documentation files (in roughly the order
listed) before diving into the code.
OVERVIEW
This package contains C software to implement JPEG image compression and decompression. JPEG (pronounced "jay-peg") is a standardized compression method for
full-color and gray-scale images. JPEG is intended for compressing real-world scenes; line drawings, cartoons and other non-realistic images are not its strong suit. JPEG
is lossy, meaning that the output image is not exactly identical to the input image. Hence you must not use JPEG if you have to have identical output bits. However, on
typical photographic images, very good compression levels can be obtained with no visible change, and remarkably high compression levels are possible if you can tolerate
a low-quality image. For more details, see the references, or just experiment with various compression settings.
This software implements JPEG baseline, extended-sequential, and progressive compression processes. Provision is made for supporting all variants of these processes,
although some uncommon parameter settings aren't implemented yet. For legal reasons, we are not distributing code for the arithmetic-coding variants of JPEG; see
LEGAL ISSUES. We have made no provision for supporting the hierarchical or lossless processes defined in the standard.
We provide a set of library routines for reading and writing JPEG image files, plus two sample applications "cjpeg" and "djpeg", which use the library to perform conversion
between JPEG and some other popular image file formats. The library is intended to be reused in other applications.
64
En
Download from Www.Somanuals.com. All Manuals Search And Download.
In order to support file conversion and viewing software, we have included considerable functionality beyond the bare JPEG coding/decoding capability; for example, the
color quantization modules are not strictly part of JPEG decoding, but they are essential for output to colormapped file formats or colormapped displays. These extra
functions can be compiled out of the library if not required for a particular application. We have also included jpegtran, a utility for lossless transcoding between different
JPEG processes, and "rdjpgcom" and "wrjpgcom", two simple applications for inserting and extracting textual comments in JFIF files.
The emphasis in designing this software has been on achieving portability and flexibility, while also making it fast enough to be useful. In particular, the software is not
intended to be read as a tutorial on JPEG. (See the REFERENCES section for introductory material.) Rather, it is intended to be reliable, portable, industrial-strength code.
We do not claim to have achieved that goal in every aspect of the software, but we strive for it.
07
We welcome the use of this software as a component of commercial products. No royalty is required, but we do ask for an acknowledgement in product documentation,
as described under LEGAL ISSUES.
LEGAL ISSUES
In plain English:
1. We don't promise that this software works. (But if you find any bugs, please let us know!)
2. You can use this software for whatever you want. You don't have to pay us.
3. You may not pretend that you wrote this software. If you use it in a program, you must acknowledge somewhere in your documentation that you've used the IJG code.
In legalese:
The authors make NO WARRANTY or representation, either express or implied, with respect to this software, its quality, accuracy, merchantability, or fitness for a particular
purpose. This software is provided "AS IS", and you, its user, assume the entire risk as to its quality and accuracy.
This software is copyright © 1991-1998, Thomas G. Lane. All Rights Reserved except as specified below.
Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose, without fee, subject to these conditions:
(1) If any part of the source code for this software is distributed, then this README file must be included, with this copyright and no-warranty notice unaltered; and any
additions, deletions, or changes to the original files must be clearly indicated in accompanying documentation.
(2) If only executable code is distributed, then the accompanying documentation must state that "this software is based in part on the work of the Independent JPEG
Group".
(3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the authors accept NO LIABILITY for
damages of any kind.
These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library. If you use our work, you ought to acknowledge us.
Permission is NOT granted for the use of any IJG author's name or company name in advertising or publicity relating to this software or products derived from it. This
software may be referred to only as "the Independent JPEG Group's software".
We specifically permit and encourage the use of this software as the basis of commercial products, provided that all warranty or liability claims are assumed by the product
vendor.
ansi2knr.c is included in this distribution by permission of L. Peter Deutsch, sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA. ansi2knr.c is
NOT covered by the above copyright and conditions, but instead by the usual distribution terms of the Free Software Foundation; principally, that you must include source
code if you redistribute it. (See the file ansi2knr.c for full details.) However, since ansi2knr.c is not needed as part of any program generated from the IJG code, this does
not limit you more than the foregoing paragraphs do.
The Unix configuration script "configure" was produced with GNU Autoconf. It is copyright by the Free Software Foundation but is freely distributable. The same holds for
its supporting scripts (config.guess, config.sub, ltconfig, ltmain.sh). Another support script, install-sh, is copyright by M.I.T. but is also freely distributable.
It appears that the arithmetic coding option of the JPEG spec is covered by patents owned by IBM, AT&T, and Mitsubishi. Hence arithmetic coding cannot legally be used
without obtaining one or more licenses. For this reason, support for arithmetic coding has been removed from the free JPEG software. (Since arithmetic coding provides
only a marginal gain over the unpatented Huffman mode, it is unlikely that very many implementations will support it.) So far as we are aware, there are no patent
restrictions on the remaining code.
The IJG distribution formerly included code to read and write GIF files. To avoid entanglement with the Unisys LZW patent, GIF reading support has been removed
altogether, and the GIF writer has been simplified to produce uncompressed GIFs. This technique does not use the LZW algorithm; the resulting GIF files are larger than
usual, but are readable by all standard GIF decoders.
We are required to state that
"The Graphics Interchange Format(c) is the Copyright property of CompuServe Incorporated. GIF(sm) is a Service Mark property of CompuServe Incorporated."
REFERENCES
We highly recommend reading one or more of these references before trying to understand the innards of the JPEG software.
The best short technical introduction to the JPEG compression algorithm is
Wallace, Gregory K. "The JPEG Still Picture Compression Standard",
Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44.
(Adjacent articles in that issue discuss MPEG motion picture compression, applications of JPEG, and related topics.) If you don't have the CACM issue handy, a PostScript
IEEE Trans. Consumer Electronics) omits the sample images that appeared in CACM, but it includes corrections and some added material. Note: the Wallace article is
copyright ACM and IEEE, and it may not be used for commercial purposes.
A somewhat less technical, more leisurely introduction to JPEG can be found in The Data Compression Book by Mark Nelson and Jean-loup Gailly, published by M&T
Books (New York), 2nd ed. 1996, ISBN 1-55851-434-1. This book provides good explanations and example C code for a multitude of compression methods including JPEG.
It is an excellent source if you are comfortable reading C code but don't know much about data compression in general. The book's JPEG sample code is far from industrial-
strength, but when you are ready to look at a full implementation, you've got one here...
The best full description of JPEG is the textbook "JPEG Still Image Data Compression Standard" by William B. Pennebaker and Joan L. Mitchell, published by Van Nostrand
Reinhold, 1993, ISBN 0-442-01272-1. Price US$59.95, 638 pp. The book includes the complete text of the ISO JPEG standards (DIS 10918-1 and draft DIS 10918-2). This is
by far the most complete exposition of JPEG in existence, and we highly recommend it.
The JPEG standard itself is not available electronically; you must order a paper copy through ISO or ITU. (Unless you feel a need to own a certified official copy, we
recommend buying the Pennebaker and Mitchell book instead; it's much cheaper and includes a great deal of useful explanatory material.) In the USA, copies of the
standard may be ordered from ANSI Sales at (212) 642-4900, or from Global Engineering Documents at (800) 854-7179. (ANSI doesn't take credit card orders, but Global
does.) It's not cheap: as of 1992, ANSI was charging $95 for Part 1 and $47 for Part 2, plus 7% shipping/handling. The standard is divided into two parts, Part 1 being the
actual specification, while Part 2 covers compliance testing methods. Part 1 is titled "Digital Compression and Coding of Continuous-tone Still Images, Part 1:
Requirements and guidelines" and has document numbers ISO/IEC IS 10918-1, ITU-T T.81. Part 2 is titled "Digital Compression and Coding of Continuous-tone Still Images,
Part 2: Compliance testing" and has document numbers ISO/IEC IS 10918-2, ITU-T T.83.
Some extensions to the original JPEG standard are defined in JPEG Part 3, a newer ISO standard numbered ISO/IEC IS 10918-3 and ITU-T T.84. IJG currently does not
support any Part 3 extensions.
The JPEG standard does not specify all details of an interchangeable file format. For the omitted details we follow the "JFIF" conventions, revision 1.02. A copy of the JFIF
spec is available from:
Literature Department
C-Cube Microsystems, Inc.
1778 McCarthy Blvd.
Milpitas, CA 95035
phone (408) 944-6300, fax (408) 944-6314
jfif.txt.gz, but it is missing the figures.
65
En
Download from Www.Somanuals.com. All Manuals Search And Download.
3-June-92 has a number of serious problems. IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6). Instead, we recommend the JPEG design
the next revision of the TIFF spec will replace the 6.0 JPEG design with the Note's design. Although IJG's own code does not support TIFF/JPEG, the free libtiff library uses
07
ARCHIVE LOCATIONS
The "official" archive site for this software is ftp.uu.net (Internet address 192.48.96.9). The most recent released version can always be found there in directory graphics/
via UUCP; contact [email protected] for information on retrieving files that way.
Numerous Internet sites maintain copies of the UUNET files. However, only ftp.uu.net is guaranteed to have the latest official version.
in the Graphics Support forum (GO CIS:GRAPHSUP), library 12 JPEG Tools. Again, these versions may sometimes lag behind the ftp.uu.net release.
The JPEG FAQ (Frequently Asked Questions) article is a useful source of general information about JPEG. It is updated constantly and therefore is not included in this
distribution. The FAQ is posted every two weeks to Usenet newsgroups comp.graphics.misc, news.answers, and other groups. It is available on the World Wide Web at
news.answers/jpeg-faq/. If you don't have Web or FTP access, send e-mail to [email protected] with body
send usenet/news.answers/jpeg-faq/part1
send usenet/news.answers/jpeg-faq/part2
RELATED SOFTWARE
Numerous viewing and image manipulation programs now support JPEG. (Quite a few of them use this library to do so.) The JPEG FAQ described above lists some of the
more popular free and shareware viewers, and tells where to obtain them on Internet.
If you are on a Unix machine, we highly recommend Jef Poskanzer's free PBMPLUS software, which provides many useful operations on PPM-format image files. In
particular, it can convert PPM images to and from a wide range of other formats, thus making cjpeg/djpeg considerably more useful. The latest version is distributed by
not nearly as portable as the IJG software is; you are likely to have difficulty making it work on any non-Unix machine.
and experimentation rather than production use; it is slower, harder to use, and less portable than the IJG code, but it is easier to read and modify. Also, the PVRG code
supports lossless JPEG, which we do not. (On the other hand, it doesn't do progressive JPEG.)
FILE FORMAT WARS
Some JPEG programs produce files that are not compatible with our library. The root of the problem is that the ISO JPEG committee failed to specify a concrete file format.
Some vendors "filled in the blanks" on their own, creating proprietary formats that no one else could read. (For example, none of the early commercial JPEG
implementations for the Macintosh were able to exchange compressed files.)
The file format we have adopted is called JFIF (see REFERENCES). This format has been agreed to by a number of major commercial JPEG vendors, and it has become
the de facto standard. JFIF is a minimal or "low end" representation. We recommend the use of TIFF/JPEG (TIFF revision 6.0 as modified by TIFF Technical Note #2) for
"high end" applications that need to record a lot of additional data about an image. TIFF/JPEG is fairly new and not yet widely supported, unfortunately.
The upcoming JPEG Part 3 standard defines a file format called SPIFF. SPIFF is interoperable with JFIF, in the sense that most JFIF decoders should be able to read the
most common variant of SPIFF. SPIFF has some technical advantages over JFIF, but its major claim to fame is simply that it is an official standard rather than an informal
one. At this point it is unclear whether SPIFF will supersede JFIF or whether JFIF will remain the de-facto standard. IJG intends to support SPIFF once the standard is
frozen, but we have not decided whether it should become our default output format or not. (In any case, our decoder will remain capable of reading JFIF indefinitely.)
Various proprietary file formats incorporating JPEG compression also exist. We have little or no sympathy for the existence of these formats. Indeed, one of the original
reasons for developing this free software was to help force convergence on common, open format standards for JPEG files. Don't use a proprietary file format!
TO DO
The major thrust for v7 will probably be improvement of visual quality. The current method for scaling the quantization tables is known not to be very good at low Q values.
We also intend to investigate block boundary smoothing, "poor man's variable quantization", and other means of improving quality-vs-file-size performance without
sacrificing compatibility.
In future versions, we are considering supporting some of the upcoming JPEG Part 3 extensions --- principally, variable quantization and the SPIFF file format.
As always, speeding things up is of great interest.
Please send bug reports, offers of help, etc. to [email protected].
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright © 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your
freedom to share and change free software - to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's
software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License
instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute
copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of
it in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain
responsibilities for you if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they,
too, receive or can get the source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the
software.
Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified
by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the
original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent
licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General
Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under
copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language.
(Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you".
66
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted,
and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
07
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish
on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and
give any other recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or
work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a
whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary
way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a
warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program
itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered
independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when
you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose
permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the
distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or
distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided
that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source
distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial
distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source
code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However,
as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components
(compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from
the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense
or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its
derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based
on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute
or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you
(whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you
cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute
the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly
through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a
whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the
sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide
if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places
the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to
the present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have
the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify
a version number of this License, you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For
software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be
guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
67
En
Download from Www.Somanuals.com. All Manuals Search And Download.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
07
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can
redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and
each file should have at least the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright © <year> <name of author>
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software
Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street,
Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright © year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain
conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called
something other than `show w' and `show c'; they could even be mouse-clicks or menu items - whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample;
alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful
to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License.
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright © 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee
your freedom to share and change free software - to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially
designated software packages - typically libraries - of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first
think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to
distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and
use pieces of it in new free programs; and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to
certain responsibilities for you if you distribute copies of the library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they,
too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with
the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step
method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the
recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by
others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free
program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with
the full freedom of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to
certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries
into non-free programs.
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the
original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public
License permits more lax criteria for linking other code with the library.
We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other
free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for
many libraries. However, the Lesser license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve
this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case,
there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission
to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU Linux operating system.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom
and the wherewithal to run that program using a modified version of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work
that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run.
68
En
Download from Www.Somanuals.com. All Manuals Search And Download.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
07
0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it
may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you".
A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions
and data) to form executables.
The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library
or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated
straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all
modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library
is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool
for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately
publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any
warranty; and distribute a copy of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work
under the terms of Section 1 above, provided that you also meet all of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument
passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the
facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute square roots has a purpose
that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function
must be optional: if the application does not supply it, the square root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered
independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when
you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose
permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the
distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution
medium does not bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the
notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version
2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative
works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above
provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2
above on a medium customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place
satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that
uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.
However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library),
rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables.
When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even
though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold
for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length),
then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library
will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work
also fall under Section 6, whether or not they are linked directly with the Library itself.
6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library,
and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for
debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply
a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference
directing the user to the copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which
must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable "work that uses
the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified
Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to
use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present
on the user's computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the
user installs one, as long as the modified version is interface-compatible with the version that the work was made with.
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more
than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the
same place.
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for reproducing the executable from it.
However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major
components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
69
En
Download from Www.Somanuals.com. All Manuals Search And Download.
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a
contradiction means you cannot use both them and the Library together in an executable that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and
distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted,
and provided that you do these two things:
07
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under
the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying
uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify,
sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or
rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its
derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the
Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it.
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute,
link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted
herein. You are not responsible for enforcing compliance by third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you
(whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you
cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute
the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through
you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid
or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the
sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author donor to decide
if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places
the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in
spirit to the present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have
the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify
a license version number, you may choose any version ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for
permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our
decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT
WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and
change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty;
and each file should have at least the "copyright" line and a pointer to where the full notice is found.
<one line to give the library's name and a brief idea of what it does.>
Copyright © <year> <name of author>
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation;
either version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street,
Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the library, if necessary. Here is a sample; alter
the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by James Random Hacker.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
That's all there is to it!
70
En
Download from Www.Somanuals.com. All Manuals Search And Download.
[Notice on GNU General Public License]
This product include the software licensed for use under the terms of a GNU General Public License. A copy of the corresponding source code can be obtained by being
charged the fee for distribution.
07
To obtain a copy, contact your local Pioneer Customer Support Center.
71
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer
Authorized Independent Service Company, or if you wish to purchase replacement parts,
operating instructions, service manuals, or accessories, please call the number shown
below.
1 – 8 0 0 – 4 2 1 – 1 4 0 4
Please do not ship your product to Pioneer without first calling the Customer Support at the
above listed number for assistance.
Pioneer Electronics Service, Inc.
P.O. BOX 1760, Long Beach,
CA 90801-1760, U.S.A.
For warranty information please see the Limited Warranty sheet included with your product.
Should this product require service in Canada, please contact a Pioneer Canadian
Authorized Dealer to locate the nearest Pioneer Authorized Service Company in Canada.
Alternatively, please contact the Customer Satisfaction Department at the following address:
Pioneer Electronics of Canada, Inc.
Customer Satisfaction Department
300 Allstate Parkway, Markham, Ontario L3R 0P2
1-877-283-5901
905-479-4411
For warranty information please see the Limited Warranty sheet included with your product.
Si ce produit doit être réparé au Canada, veuillez vous adresser à un distributeur autorisé
Pioneer du Canada pour obtenir le nom du Centre de Service Autorisé Pioneer le plus près
de chez-vous. Vous pouvez aussi contacter le Service à la clientèle de Pioneer:
Pioneer Électroniques du Canada, Inc.
Service Clientèle
300, Allstate Parkway, Markham, Ontario L3R 0P2
1-877-283-5901
905-479-4411
Pour obtenir des renseignements sur la garantie, veuillez vous reporter au feuillet sur la
garantie restreinte qui accompagne le produit.
S018_C_EF
Register Your Product on
http://www.pioneerelectronics.ca (Canada)
PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270
K002_B_En
Published by Pioneer Corporation.
Copyright © 2008 Pioneer Corporation.
All rights reserved.
<08F00001>
<VRB1505-B>
Printed in Japan
Download from Www.Somanuals.com. All Manuals Search And Download.
|