Operation Manual
6.5 inch Wide AV System Display/DVD Player
AVX-P8DVD
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
3
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
4
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your
musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your
equipment offers. This manufacturer and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your equipment by playing it at a safe level. One
that lets the sound come through loud and clear without annoying blaring or distortion—and, most
importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against
this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After
all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the
Electronic Industries Association’s Consumer Electronics Group recommend you avoid prolonged
exposure to excessive noise. This list of sound levels is included for your protection.
Decibel
Level
Example
30
40
50
60
70
80
Quiet library, soft whispers
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE
90
100
120
140
180
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet plane
Rocket launching pad
Information courtesy of the Deafness Research Foundation.
5
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
01
Precautions
IMPORTANT SAFEGUARDS
To ensure safe driving
Please read all of these instructions regarding
your display and retain them for future refer-
ence.
WARNING
!
LIGHT GREEN LEAD AT POWER CON-
NECTOR IS DESIGNED TO DETECT
PARKED STATUS AND MUST BE CON-
NECTED TO THE POWER SUPPLY SIDE
OF THE PARKING BRAKE SWITCH. IM-
PROPER CONNECTION OR USE OF
THIS LEAD MAY VIOLATE APPLICABLE
LAW AND MAY RESULT IN SERIOUS IN-
JURY OR DAMAGE.
1
Read this manual fully and carefully before
operating your display.
2
Keep this manual handy as a reference for
operating procedures and safety informa-
tion.
3
4
5
Pay close attention to all warnings in this
manual and follow the instructions care-
fully.
Do not allow other persons to use this sys-
tem until they have read and understood
the operating instructions.
Do not install the display where it may (i)
obstruct the driverꢀs vision, (ii) impair the
performance of any of the vehicleꢀs operat-
ing systems or safety features, including
air bags, hazard lamp buttons or (iii) impair
the driverꢀs ability to safely operate the ve-
hicle.
!
!
To avoid the risk of accident and the potential
violation of applicable laws, the front DVD or
TV (sold separately) feature should never be
used while the vehicle is being driven. Also,
rear displays should not be in a location
where it is a visible distraction to the driver.
In some countries or states the viewing of
images on a display inside a vehicle even by
persons other than the driver may be illegal.
Where such regulations apply, they must be
obeyed and this unitꢀs DVD features should
not be used.
6
7
As with any accessory in your vehicleꢀs in-
terior, the display should not divert your
attention from the safe operation of your
vehicle. If you experience difficulty in oper-
ating the system or reading the display,
please park safely before making adjust-
ments.
Do not attempt to install or service your
display by yourself. Installation or servi-
cing of the display by persons without
training and experience in electronic
equipment and automotive accessories
may be dangerous and could expose you
to the risk of electric shock or other ha-
zards and can cause damage to the system
that is not covered by warranty.
This unit detects whether your vehicleꢀs park-
ing brake is engaged or not, and prevents you
from watching a DVD or TV on the front dis-
play while driving. When you attempt to watch
a DVD or TV, the warning VIDEO VIEWING IS
NOT AVAILABLE WHILE DRIVING will appear
on the front display.
To watch a DVD or TV on the front display, park
your vehicle in a safe place and apply the park-
ing brake.
When using a display connected
8
9
Please remember to wear your seat belt at
all times while operating your vehicle. If
you are ever in an accident, your injuries
can be considerably more severe if your
seat belt is not properly buckled.
to REAR VIDEO OUTPUT
This unitꢀs REAR VIDEO OUTPUT is for con-
nection of a display to enable passengers in
the rear seats to watch the DVD or TV.
Never use headphones while driving.
6
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Precautions
01
WARNING
NEVER install the rear display in a location that
enables the driver to watch the DVD or TV while
driving.
To avoid battery exhaustion
Be sure to run the vehicle engine while using
this unit. Using this unit without running the
engine can result in battery drainage.
WARNING
Do not use with vehicles that do not feature an
ACC position.
7
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Before You Start
Information to User
Note
It is not possible to play back DVD audio disc.
This player can only play back discs bearing the
marks shown above.
Alteration or modifications carried out without
appropriate authorization may invalidate the
userꢀs right to operate the equipment.
DVD video disc region numbers
DVD video discs that have incompatible region
numbers cannot be played on this player. The
region number of the player can be found on
the bottom of this unit.
About this unit
Important (Serial number)
The illustration below shows the regions and
corresponding region numbers.
The serial number is located on the bottom of
this unit. For your own security and convenience,
be sure to record this number on the enclosed
warranty card.
Playable discs
DVD, Video CD and CD discs that display the
logos shown below can be played back on this
player.
When combined with a Pioneer
navigation unit
We recommend that you use the latest version
of the navigation map disc that is correspond-
ing to the touch panel operation.
When you use this unit with the Pioneer DVD
navigation unit, make sure that you use the
map disc CNDV-21 or later. This manual ex-
plains the operations with the combined use
of them.
If you do not use the map disc CNDV-21 but
use an older version with the navigation unit,
this unit may have some failures or inconve-
niences as follows:
DVD video
Video CD
CD
!
ENTERTAINMENT button and WIDE button
cannot function as POS button and
NAVI MENU button.
!
NAVI (navigation unit), such as DVD video
from the combined Pioneer navigation unit
8
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Before You Start
02
with DVD video playback, cannot be se-
lected as a source.
mation is not available, please contact the
companies listed below:
!
!
Voice-recognition control system of the
combined Pioneer navigation unit cannot
function properly. The voice operation for
navigation can be used, but the voice op-
eration related to AV equipment cannot be
used.
Route guidance of the combined Pioneer
navigation unit cannot function properly
when some other source images are dis-
played. Guidance by voice can be obtained,
but on guidance by display (e.g. switching
to an enlarged map of an intersection) can-
not be obtained.
Please do not ship your unit to the companies
at the addresses listed below for repair without
advance contact.
U.S.A.
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760
Long Beach, CA 90801-1760
800-421-1404
CANADA
Pioneer Electronics of Canada, Inc.
CUSTOMER SATISFACTION DEPARTMENT
300 Allstate Parkway
!
NAVI (navigation unit wallpaper) cannot be
selected as a background display.
Markham, Ontario L3R OP2
1-877-283-5901
About this manual
For warranty information please see the Lim-
ited Warranty sheet included with this unit.
This unit features a number of sophisticated
functions ensuring superior reception and op-
eration. All the functions have been designed
for the easiest possible use, but many are not
self-explanatory. This operation manual will
help you benefit fully from this unitꢀs potential
and to maximize your listening enjoyment.
We recommend that you familiarize yourself
with the functions and their operation by read-
ing through the manual before you begin
using this unit. It is especially important that
you read and observe precautions noted on
the next page and in other sections.
Product registration
Visit us at the following site:
1
Register your product. We will keep the details
of your purchase on file to help you refer to
this information in the event of an insurance
claim such as loss or theft.
2
3
Receive updates on the latest products and
technologies.
Download ownerꢀs manuals, order product
catalogues, research new products, and
much more.
After-sales service for
Pioneer products
Please contact the dealer or distributor from
where you purchased this unit for after-sales
service (including warranty conditions) or any
other information. In case the necessary infor-
9
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Before You Start
DVD video playback
Precautions
It is possible to play back DVD video, DVD-R
(video mode) and DVD-RW (video mode).
Remember that use of this system for com-
mercial or public viewing purposes may con-
stitute an infringement on the authorꢀs rights
protected by the Copyright Law.
WARNING:
Handling the cord on this product or cords asso-
ciated with accessories sold with the product will
expose you to lead, a chemical known to the
State of California and other governmental enti-
ties to cause cancer and birth defects or other re-
productive harm. Wash hands after handling.
Video CDs featuring PBC compatibility
It is possible to play back Video CDs featuring
PBC (playback control).
This product contains mercury. Disposal of this
material may be regulated due to environmental
considerations. For disposal or recycling informa-
tion, please contact your local authorities or the
CD playback
Music CD/CD-R/CD-RW playback is possible.
MP3 file playback
You can play back MP3 files recorded on CD-
ROM/CD-R/CD-RW (ISO9660 Level 1/Level 2
standard recordings).
CAUTION:
USE OF CONTROL OR ADJUSTMENT OR
PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
!
Supply of this product only conveys a li-
cense for private, non-commercial use and
does not convey a license nor imply any
right to use this product in any commercial
(i.e. revenue-generating) real time broad-
casting (terrestrial, satellite, cable and/or
any other media), broadcasting/streaming
via internet, intranets and/or other net-
works or in other electronic content distri-
bution systems, such as pay-audio or
audio-on-demand applications. An inde-
pendent license for such use is required.
For details, please visit
CAUTION:
THE USE OF OPTICAL INSTRUMENTS
WITH THIS PRODUCT WILL INCREASE
EYE HAZARD.
!
!
Keep this manual handy as a reference for
operating procedures and precautions.
Always keep the volume low enough so
that you can hear sounds from outside the
vehicle.
!
!
Protect this unit from moisture.
If the battery is disconnected or dis-
charged, the preset memory will be erased
and must be reprogrammed.
WMA file playback
You can play back WMA files recorded on CD-
ROM/CD-R/CD-RW (ISO9660 Level 1/Level 2
standard recordings).
NTSC compatibility
This unit is NTSC system compatible. When
connecting other components to this unit, be
sure components are compatible with the
same video system otherwise images will not
be correctly reproduced.
Features
Touch panelkey operation
It is possible to operate this unit by using
touch panel key.
10
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Before You Start
02
Dolby Digital/DTS compatibility
When using this unit with a Pioneer multi-
channel processor, you can enjoy the atmo-
sphere and excitement provided by DVD movie
and music software featuring 5.1 channel re-
cordings.
About WMA
!
Manufactured under license from Dolby La-
boratories. ꢁDolbyꢂ and the double-D sym-
bol are trademarks of Dolby Laboratories.
The Windows Media" logo printed on the box
indicates that this unit can play back WMA
data.
WMA is short for Windows Media Audio and
refers to an audio compression technology
that is developed by Microsoft Corporation.
WMA data can be encoded by using Windows
Media Player version 7 or later.
Microsoft, Windows Media, and the Windows
logo are trademarks, or registered trademarks
of Microsoft Corporation in the United States
and/or other countries.
!
ꢁDTSꢂ is a registered trademark of Digital
Theater Systems, Inc.
Multi-aspect
Switching between wide screen, letterbox and
panscan display is possible.
Multi-audio
You can switch between multiple audio sys-
tems recorded on a DVD as desired.
Notes
!
!
With some applications used to encode WMA
files, this unit may not operate correctly.
With some applications used to encode WMA
files, album names and other text information
may not be correctly displayed.
Multi-subtitle
You can switch between multiple subtitle lan-
guages recorded on a DVD as desired.
Multi-angle
You can switch between multiple viewing an-
gles of a scene recorded on a DVD as desired.
To protect the LCD screen
Note
!
Do not allow direct sunlight to fall on the
display when this unit is not being used.
Extended exposure to direct sunlight can
result in LCD screen malfunction due to
the resulting high temperatures.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual prop-
erty rights owned by Macrovision Corporation
and other rights owners. Use of this copyright
protection technology must be authorized by
Macrovision Corporation, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is
!
When using a portable phone, keep the an-
tenna of the portable phone away from the
display to prevent disruption of the video by
the appearance of spots, colored stripes,
etc.
prohibited.
11
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Before You Start
For viewing LCD comfortably
Switching the operation mode
Due to its construction, the view angle of the
LCD screen is limited. The viewing angle (verti-
cal and horizontal) can be increased, however,
by using BRIGHT to adjust the black density of
the video. When using for the first time, adjust
the black density in accordance with the view-
ing angle (vertical and horizontal) to adjust for
clear viewing. DIMMER can also be used to
adjust the brightness of the LCD screen itself
to suit your personal preference.
This unit features two operation modes: the IP-
BUS mode (S) and the ADD-ON mode (M).
Switch the mode according to the combined
components.
!
IP-BUS mode (S) ꢃ Using with a Pioneer
head unit featuring an IP-BUS input or
multi-channel processor control unit
ADD-ON mode (M) ꢃ Using with a car
stereo featuring RCA audio inputs or FM re-
ception capability
!
%
Use a thin standard tip screwdriver to
switch the operation mode switch on the
What the marks on DVDs
indicate
back of this unit.
The marks below may be found on DVD disc
labels and packages. They indicate the type of
images and audio recorded on the disc, and
the functions you can use.
Mark
Meaning
!
After switching, reset the micro-
processor.
Indicates the number of audio sys-
tems.
2
Indicates the number of subtitle lan-
guages.
2
Resetting the microprocessor
Pressing RESET lets you reset the micropro-
cessor to its initial settings.
The microprocessor must be reset under the
following conditions:
Indicates the number of viewing an-
gles.
3
Indicates the picture size (aspect ratio:
screen width-to-height ratio) type.
16 : 9 LB
!
Prior to using this unit for the first time
after installation
1
Indicates the number of the region
where playback is possible.
ALL
!
!
If the unit fails to operate properly
When strange or incorrect messages ap-
pear on the display
When an operation is prohibited
1
Turn the ignition switch OFF.
When you are watching a DVD and attempt to
perform an operation, it may not be performed
because of the programming on the disc.
When this happens, the icon appears on
the screen.
!
The icon may not appear with certain
discs.
12
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Before You Start
02
2
Press RESET with a pen tip or other
WARNING
pointed instrument.
Keep the battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.
CAUTION
!
!
Use only one CR2025 (3 V) lithium battery.
Remove the battery if the remote control is not
used for a month or longer.
!
Do not recharge, disassemble, heat or dispose
of the battery in fire.
RESET button
!
!
Do not handle the battery with metallic tools.
Do not store the battery with metallic materi-
als.
In the event of battery leakage, wipe the re-
mote control completely clean and install a
new battery.
When disposing of used batteries, please
comply with governmental regulations or en-
vironmental public institutionsꢀ rules that
apply in your country/area.
Notes
!
!
When using with a Pioneer navigation unit, if
you press RESET, be sure ACC OFF is se-
lected. If ACC ON is selected, correct opera-
tion may not be possible even if you press
RESET.
After completing connections or when you
want to erase all memorized settings or return
the unit to its initial (factory) settings, switch
your engine ON or set the ignition switch to
ACC ON before pressing RESET.
!
!
Using the remote control
Point the remote control in the direction of the
front panel to operate.
Use and care of the remote
control
!
The remote control may not function prop-
erly in direct sunlight.
Installing the battery
Important
Slide the tray out on the back of the remote
control and insert the battery with the plus (+)
and minus (ꢃ) poles pointing in the proper di-
rection.
!
!
Do not store the remote control in high tem-
peratures or direct sunlight.
Do not let the remote control fall onto the
floor, where it may become jammed under the
brake or accelerator pedal.
!
When using for the first time, pull out the
film protruding from the tray.
13
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
03
Whatꢀs What
1 2
3 4 5
6
7
8
9
d
c
b
a
j i h g f e
6 ENTERTAINMENT button
Press to switch between the background
displays.
Display unit
1 DISPLAY button
Press to select different displays.
7 WIDE button
Press to select a desired mode for enlarging
a 4:3 picture to a 16:9 one.
2 BACK LIGHT button
Press and hold to turn the backlight off.
Press again to turn the backlight on.
8 V.ADJ button
Press and hold to display the picture adjust-
ment menu.
3 Ambient light sensor
Senses ambient light. This system automati-
cally adjusts the brightness of the display to
compensate for ambient light.
9 Disc loading slot
Insert a disc to play.
4 FLIP DOWN button
Press to turn the LCD panel horizontal tem-
porarily from upright position.
a Signal receptor
Receives signals from a remote control.
5 OPEN/CLOSE button
Press to open or close the LCD panel.
b EJECT button
Press to eject a disc from this unit.
c ANGLE (+/ꢁ) button
Press to change the LCD panel angle.
14
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Whatꢀs What
03
d RELEASE button
Move downward to remove the front panel
from this unit.
e NEXT (p) button
Press to go to the next track (chapter).
f PREVIOUS (o) button
Press to return to the previous track (chap-
ter).
g PLAY/PAUSE (f) button
Press to switch sequentially between play-
back and pause.
h AV SOURCE button
This unit is turned on by selecting a source.
Press to cycle through all the available
sources.
i Rear indicator
Lights when the DVD player is operated
from rear seats.
j RESET button
Press to return to the factory settings (initial
settings).
15
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
03
Whatꢀs What
2 3 4
q
i
p
n
l
j
h
g
5
6
7
9
b
d
1
8
a
c
e
f
5 Joystick
Remote control
Move to do fast forward, reverse and track
search controls. Also used for controlling
functions.
1 Remote control selection switch
Switch to change the setting of the remote
control. For details, refer to Setting remote
6 Remote control operation mode switch
Switch the operation mode between AVX,
DVD and TV modes. Normally, set to AVX.
2 VOLUME buttons
Press to increase or decrease the volume on
the Pioneer head unit.
!
!
!
AVX ꢃ For common operation of this unit
DVD ꢃ Only for DVD player operation
TV ꢃ Only for TV tuner operation
For details, refer to Using the remote control
operation mode switch on the next page.
3 REAR.S button
Press to watch a DVD/Video CD on a rear
display if DVD (built-in DVD player) is not
selected as the source.
7 BOOKMARK (BOOK.M) button
AVX mode
Press to operate the preprogrammed func-
tions for each source. (Refer to Using the
4 AV SOURCE button
This unit is turned on by selecting a source.
Press to cycle through all the available
sources.
DVD mode
Press to turn the bookmark function on or
off. For details, refer to Resume playback
16
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Whatꢀs What
03
8 BACK button
k STEP (r/q) button
Press to return to the previous display.
Press to move ahead one frame at a time
during DVD/VideoCD playback. Press and
hold for one second to activate slow play-
back.
9 BAND/ESC button
Press to cancel the control mode of func-
tions.
l SUBTITLE (SUB.T) button
Press to change the subtitle language dur-
ing DVD playback.
a ENTERTAINMENT button
Press to switch between the background
displays.
m DISPLAY button
b FORWARD (n) button
Press to select different displays.
Press to perform fast forward.
n AUDIO button
c STOP (g) button
Press to stop playback.
Press to change the audio language during
DVD playback.
d NEXT (p) button
o RETURN button
Press to go to the next track (chapter).
Press to display the PBC (playback control)
menu during PBC playback.
e CLEAR button
Press to cancel the input number when
0ꢁ10 are used.
p MENU button
Press to display the DVD menu during DVD
playback.
f 0ꢁ10 buttons
Press to directly select the desired track or
disc. Buttons 1ꢁ6 can operate disc number
search for the multi-CD player.
q TOP MENU (TOP.M) button
Press to return to the top menu during DVD
playback.
g PREVIOUS (o) button
Press to return to the previous track (chap-
ter).
Using the remote control
operation mode switch
There are three remote control operation
modes on the remote control.
h REVERSE (m) button
Press to perform fast reverse.
i PLAY/PAUSE (f) button
Press to switch sequentially between play-
back and pause.
AVX mode operation
When operating this unit by remote control,
the mode is normally switched to AVX.
!
Only when using this unit with ADD-ON
mode (M), the joystick can perform the
same operations as the touch panel keys
a, b, c and d.
j ANGLE button
Press to change the viewing angle during
DVD playback.
17
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
03
Whatꢀs What
!
Only when using this unit with ADD-ON
mode (M), 1ꢁ6 can perform the same op-
erations as the disc selection keys 01ꢂ06.
ꢄ If you want to select a disc located at 7
to 12 by using buttons 1ꢁ6, press and
hold the corresponding numbers, such
as 1 for disc 7, until the disc number ap-
pears in the display.
%
When you want to operate the follow-
ing functions only on the rear display,
switch the mode to TV:
!
When performing manual or seek tuning by
moving the joystick left or right.
When recalling preset stations by moving
the joystick up or down.
!
Note
DVD mode operation
With the mode switched to TV, you cannot use
any buttons but AV SOURCE and VOLUME. The
joystick is also available in TV mode operation.
If you switch the mode to DVD, the joystick
and 0ꢁ10 operations are changed for DVD
player.
%
When you want to operate the follow-
ing functions, switch the mode to DVD:
!
!
!
When operating the DVD menu by using
the joystick. (Refer to Operating the DVD
When operating the PBC menu by using
When specifying title by using 0ꢁ10. (Refer
to Specifying title on page 31.)
Note
With the mode switched to DVD, you cannot use
these buttons; BACK, ENTERTAINMENT and
DISPLAY.
TV mode operation
If you use the rear output on TV tuner, you can
watch the TV picture on the rear display inde-
pendently. To operate the TV on the rear dis-
play independently, switch the mode to TV. In
this case, the joystick operation is changed for
TV.
!
For details concerning operation, refer to
the TV tunerꢀs operation manuals.
18
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Basic Operations
04
!
When AV INPUT1 (video input 1) and/or
AV INPUT2 (video input 2) are not set to
Turning the unit on and
selecting a source
1
ADD-ON mode (M)
%
When using the touch panel keys,
touch the source icon and then touch the
desired source name.
The source names are displayed and select-
able ones are highlighted.
!
!
!
!
!
!
!
!
!
!
DVD ꢃ Built-in DVD player
M-CD ꢃ Multi-CD player
TV ꢃ Television
AV-1 ꢃ Video input 1
AV-2 ꢃ Video input 2
EXT-1 ꢃ External unit 1
EXT-2 ꢃ External unit 2
AUX ꢃ AUX
1 Source icon
Shows which source has been selected.
You can select a source you want to listen to. If
DVD D. AUTO is turned on, load a disc in the
NAVI ꢃ Navigation unit
SOURCE OFF ꢃ Turn the unit off
#
When the source icon is not displayed, you
can display it by touching the screen.
IP-BUS mode (S)
#
To return to the playback display, touch ESC.
1
Select this DVD player as a source on
%
When using the button, press
your head unit.
Refer to the head unit operation manual.
AV SOURCE to select a source.
Press AV SOURCE repeatedly to switch be-
tween the following sources:
2
Press AV SOURCE to select a video
TV (television)ꢄAV-1 (video input 1)ꢄAV-2
(video input 2)ꢄDVD (built-in DVD player)
ꢄM-CD (multi-CD player)ꢄEXT-1 (external
unit 1)ꢄEXT-2 (external unit 2)ꢄAUX (AUX)
ꢄNAVI (navigation unit)
source.
Press AV SOURCE repeatedly to switch be-
tween the following sources:
DVD (built-in DVD player)ꢄAV-1 (video input
1)ꢄAV-2 (video input 2)ꢄNAVI (navigation
unit)
Notes
Note
!
In the following cases, the sound source will
not change:
In the following cases, the sound source will not
change:
ꢄ When there is no unit corresponding to the
selected source connected to this unit.
ꢄ When there is no disc in the unit.
ꢄ When there is no magazine in the multi-
CD player.
!
When there is no unit corresponding to the se-
lected source connected to this unit.
When there is no disc in the unit.
!
19
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
04
Basic Operations
ꢄ When the AUX (auxiliary input) is set to off
(refer to page 63).
ꢄ When AV INPUT1 (video input 1) and/or
AV INPUT2 (video input 2) are not set to
External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
!
!
If the DVD player does not operate properly,
an error message such as ERROR-02 may be
If bookmark function is on, DVD playback re-
sumes from the selected point. For more de-
!
Turning the unit off
IP-BUS mode (S)
%
Turn this unit off from your head unit.
Refer to the head unit operation manual.
If you press AV SOURCE and hold to turn this
#
Loading a disc
unit off, Power off (POWER OFF) appears on the
head unitꢀs display.
%
Insert a disc into the disc loading slot.
Playback will automatically start.
When a disc is loaded in this unit, press
AV SOURCE to select DVD.
If DVD D. AUTO is turned off, press
#
ADD-ON mode (M)
#
%
When using the touch panel keys,
touch the source icon and then touch
SOURCE OFF.
#
If DVD A. PLAY is on, SOME DISCS MAY
#
When the source icon is not displayed, you
NOT FULLY OPERATE ON THIS SYSTEM is dis-
can display it by touching the screen.
%
When using the button, press
AV SOURCE and hold until the unit turns
#
To eject a disc, press EJECT.
off.
Notes
!
!
The DVD player plays one, standard, 12-cm or
8-cm (single) disc at a time. Do not use an
adapter when playing 8-cm discs.
Do not insert anything other than a disc into
the disc loading slot. Discs which can be
played back are listed on Playable discs on
page 8.
If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press EJECT to eject the disc, and check the
disc for damage before inserting it again.
Using the rear display
You can watch a DVD/Video CD on the rear
display regardless of whether DVD (built-in
DVD player) is selected as the source or not.
!
To watch a DVD/Video CD on the rear dis-
play only, switch the operation mode on the
remote control to DVD. And you can oper-
ate the DVD/Video CD playback on the rear
display independently by the remote con-
trol. (Refer to page 17.)
!
20
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Basic Operations
04
Displaying navigation menu
CAUTION
%
Press ENTERTAINMENT to display navi-
When you have turned the DVD/Video CD play-
back on by pressing REAR.S on the remote con-
trol, you cannot turn it off even if you press
AV SOURCE (SOURCE) and hold. In this case,
press REAR.S to turn the DVD/Video CD playback
off.
gation menu when the navigation map is
displayed.
#
You cannot use ENTERTAINMENT on the re-
mote control.
Switching to the navigation image
%
Press REAR.S to watch a DVD/Video CD
on the rear display when DVD (built-in
DVD player) is not selected as the source.
DVD/Video CD playback is turned on and the
rear indicator lights.
%
Press V.ADJ to switch the display to na-
vigation image.
To return to the video of each source, press
V.ADJ again.
#
#
To turn the DVD/Video CD playback off, press
REAR.S again.
Note
When a Pioneer navigation unit is connected to
this unit, the navigation image can be displayed
on the rear display. (Refer to page 66.)
Displaying the navigation
image
You can display navigation map and naviga-
tion menu on this display.
!
You can operate these functions only when
a Pioneer navigation unit is connected to
this unit.
Displaying navigation map
%
#
Press WIDE to display navigation map.
When the map is scrolled, pressing this but-
ton returns to the display of the map of your sur-
roundings.
21
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
04
Basic Operations
Operating the menu
Touch panelkey basic
operation
Activating the touch panelkeys
2
4
3
1
1 FUNCTION key
Touch to select functions for each source.
1
1 Touch panel keys
2 SETUP key
Touch to do various operations.
Touch to select various setup functions.
1
Touch the screen to activate the touch
3 BACK key
panel keys corresponding to each source.
Touch to return to the previous display.
The touch panel keys appear on the display.
4 ESC key
#
To go to the next group of touch panel keys,
Touch to cancel the control mode of func-
tions.
touch d.
2
#
Touch ESC to hide the touch panel keys.
You can also hide the touch panel keys by
1
Touch A.MENU to display MENU.
MENU appears on the display.
When A.MENU is not displayed, you can dis-
play it by touching the screen.
pressing BAND/ESC.
#
Note
If you do not use the touch panel keys within 30
seconds, they will be hidden automatically.
2
Touch the desired key to display the
function names you want to operate.
To go to the next group of function names,
touch NEXT.
#
#
To return to the previous group of function
names, touch PREV.
3
Touch ESC to return to the display of
each source.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
22
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Basic Operations
04
ꢄ Removing or attaching the front panel
will automatically close or open the LCD
panel. (Refer to page 26.)
When the ignition switch is turned OFF
after the LCD panel has been closed, turn-
ing the ignition switch ON again (or turning
it to ACC) will not open the LCD panel. In
this case, press OPEN/CLOSE to open the
LCD panel.
Operating the menu by using the
joystick
You can also perform most of the menu items
by using the joystick.
!
!
Switch the remote control operation mode
to AVX to operate the menu by using the
joystick on the remote control. (Refer to
page 17.)
!
When closing the LCD panel, check to
make sure that it has closed completely. If
the LCD panel has stopped halfway, leaving
it like this could result in damage.
1
Click the joystick during display of each
source to display MENU.
MENU appears on the display.
2
Move the joystick up or down and then
%
panel.
#
Press OPEN/CLOSE to open the LCD
click it to display the function names you
want to operate.
To close the LCD panel, press OPEN/CLOSE
#
To go to the next group of function names,
move the joystick to NEXT and click it.
To return to the previous group of function
names, move the joystick to PREV and click it.
again.
#
Adjusting the LCD panelangle
3
Press BAND/ESC to return to the display
of each source.
You can return to the previous display by
Important
!
If you can hear the LCD panel knocking
against your vehicleꢀs console or dashboard,
press ANGLE (ꢁ) to move the LCD panel a lit-
tle forward.
#
pressing BACK.
!
When adjusting the LCD panel angle, be sure
to press ANGLE (+/ꢁ). Forcibly adjusting the
LCD panel by hand may damage it.
Opening and closing the
LCD panel
The LCD panel will be opened or closed auto-
matically with the turning of the ignition
switch on or off. You can turn off the automatic
close/open function. (Refer to page 66.)
%
Press ANGLE (+/ꢁ) to adjust the LCD
panel to an easily viewable angle.
The LCD panel angle continues changing as
long as you press ANGLE (+/ꢁ) and hold.
!
Do not close the LCD panel with hands by
force. That cause malfunction.
!
The automatic close/open function will op-
erate the display as follows.
ꢄ When the ignition switch is turned OFF
while the LCD panel is opened, the LCD
panel will close after six seconds.
ꢄ When the ignition switch is turned ON
again (or turned to ACC), the LCD panel
will be opened automatically.
23
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
04
Basic Operations
#
The adjusted the LCD panel angle will be
to the ends, enabling you to enjoy a 4:3 picture
without sensing any disparity even on a wide
screen.
memorized and automatically returned to the
next time the LCD panel is opened.
CINEMA (cinema)
Turning the LCD panelhorizontal
When the LCD panel is upright and it hinders
the operation of the air conditioner, the panel
can be turned horizontal temporarily.
The picture is enlarged by the same proportion as
FULL or ZOOM in the horizontal direction and by
an intermediate proportion between FULL and
ZOOM in the vertical direction; ideal for a cine-
ma-sized picture (wide screen picture) where cap-
tions lie outside.
%
Press FLIP DOWN to turn the LCD panel
horizontal.
ZOOM (zoom)
#
To return to original position, press
FLIP DOWN again.
A 4:3 picture is enlarged in the same proportion
both vertically and horizontally; ideal for a cine-
ma-sized picture (wide screen picture).
#
The LCD panel returns to the original position
automatically with beeping sound 10 seconds
after operation.
NORMAL (normal)
A 4:3 picture is displayed as it is, giving you no
sense of disparity since its proportions are the
same as that of the normal picture.
Changing the wide screen
mode
Notes
You can select a desired mode for enlarging a
4:3 picture to a 16:9 one.
!
!
Different settings can be memorized for each
video source.
When video is viewed in a wide screen mode
that does not match its original aspect ratio, it
may appear different.
Remember that using the wide mode feature
of this system for commercial or public view-
ing purposes may constitute an infringement
on the authorꢀs rights protected by the Copy-
right Law.
%
Press WIDE to select the desired set-
ting.
Press WIDE repeatedly to switch between the
following settings:
FULL (full)ꢄJUST (just)ꢄCINEMA (cinema)
ꢄZOOM (zoom)ꢄNORMAL (normal)
!
#
When a Pioneer navigation unit is connected
to this unit, press WIDE and hold to select the de-
sired setting. Press and hold WIDE repeatedly to
switch between the settings.
!
!
Video will appear grainy when viewed in
CINEMA or ZOOM mode.
The navigation map and the rear view camera
picture is always FULL.
FULL (full)
A 4:3 picture is enlarged in the horizontal direc-
tion only, giving you a 4:3 TV picture (normal pic-
ture) without any omissions.
Adjusting the picture
adjustment
You can adjust BRIGHT (brightness),
CONTRAST (contrast), COLOR (color) and
JUST (just)
The picture is enlarged slightly at the center and
the amount of enlargement increases horizontally
24
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Basic Operations
04
#
SOURCE will appear in the display instead of
HUE (hue) for each source and rear view cam-
BACK-CAMERA when you select
era.
BACK-CAMERA.
!
The adjustments of BRIGHT and
CONTRAST are stored separately for light
ambient (daytime) and dark ambient (night-
#
With some rear view cameras, picture adjust-
ment may not be possible.
time). A sun
or moon
is displayed to
3
Touch c or d to adjust the selected
the left of BRIGHT and CONTRAST, respec-
tively, as the ambient light sensor deter-
mines brightness or darkness.
You cannot adjust HUE for PAL video.
You cannot adjust COLOR or HUE for the
audio source.
item.
Each time you touch c or d it increases or de-
creases the level of selected item. +24 ꢃ ꢁ24 is
displayed as the level is increased or de-
creased.
!
!
!
This unit detects whether your vehicleꢀs
parking brake is engaged or not, and pre-
vents you from adjusting the picture adjust-
ment while driving. When you attempt to
adjust the picture adjustment, the warning
YOU CANNOT USE THIS FUNCTION
WHILE DRIVING will appear on the display
and indicate that the picture adjustment
cannot be used.
4
Touch ESC to hide the touch panel keys.
Adjusting the dimmer
The adjustment of DIMMER is stored sepa-
rately for each ambient light; daytime, evening
and nighttime. The brightness of LCD screen
will be adjusted to optimum level automati-
cally in accordance with the ambient light
based on the setting values.
1
Press V.ADJ and hold to display
PICTURE ADJUST.
Press V.ADJ until PICTURE ADJUST appears
in the display.
1
Press V.ADJ and hold to display
PICTURE ADJUST.
Press V.ADJ until PICTURE ADJUST appears
in the display.
2
Touch any of the following touch panel
keys to select the function to be adjusted.
The adjustment function names are displayed
and adjustable ones are highlighted.
2
Touch DIMMER.
The ambient light level used as the standard
for adjusting DIMMER appears above the level
bar.
!
!
!
!
BRIGHT ꢃ Adjust the black intensity
CONTRAST ꢃ Adjust the contrast
COLOR ꢃ Adjust the color saturation
HUE ꢃ Adjust the tone of color (red is em-
phasized or green is emphasized)
!
!
!
Yellow sun
ꢃ Adjust the brightness for
bright ambient light (daytime)
Red sun
ꢃ Adjust the brightness for in-
termediate brightness (evening)
!
!
DIMMER ꢃ Adjust the brightness of display
BACK-CAMERA ꢃ Switch to the picture ad-
justment display for the rear view camera
SOURCE ꢃ Return to the picture adjustment
display for each source
Blue moon
ꢃ Adjust the brightness for
dark ambient light (nighttime)
!
3
Touch c or d to adjust the brightness.
Each time you touch c or d moves yellow to-
wards the left or the right.
#
You can adjust the picture adjustment for rear
view camera only when B. CAMERA is turned on.
(Refer to Setting for rear viewcamera on page 65.)
25
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
04
Basic Operations
The level indicates the brightness of the
screen being adjusted. The farther yellow
moves to the right, the brighter the screen.
with water or other fluids to prevent perma-
nent damage.
4
Touch ESC to hide the touch panel keys.
Note
The icons indicating the current ambient bright-
ness used for adjusting BRIGHT and CONTRAST
may differ from DIMMER slightly.
Attaching the front panel
%
Replace the front panel by clipping it
into place.
Align the groove on the bottom of the front
panel with the guide on the display unit.
Protecting your unit from
theft
The front panel can be detached from this unit
to discourage theft.
!
If the front panel is not detached from this
unit within five seconds of turning off the
ignition, a warning tone will sound.
!
!
Only when using this unit with ADD-ON
mode (M), you can operate this function.
You can turn off the warning tone. See
!
Press RELEASE until the front panel clicks
into place.
Important
!
Never use force or grip the display and the
buttons too tightly when removing or attach-
ing.
!
!
!
Avoid subjecting the front panel to excessive
shocks.
Keep the front panel out of direct sunlight and
high temperatures.
If removed, replace the front panel on the unit
before starting up your vehicle.
Removing the front panel
%
Move downward RELEASE and remove
the front panel toward you.
Take care not to grip it too tightly or to drop
the front panel and protect it from contact
26
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Playing DVD video discs
Watching a DVD video
05
8 Audio language indicator
Shows which audio language has been se-
lected.
1
3
4
5
2
1
Press AV SOURCE to select the DVD
player.
Press AV SOURCE until DVD player is selected
as the source.
#
If no disc is loaded in the unit, you cannot se-
lect the DVD player. Insert a disc in the unit.
(Refer to page 20.)
#
With some discs, a menu may be displayed.
6
7
8
These are the basic steps necessary to play a
DVD video with your DVD player. More ad-
vanced DVD video operation is explained start-
ing on page 29.
2
Touch the screen to display the touch
panel keys.
3
To skip back or forward to another
chapter, touch o or p.
Touching p skips to the start of the next
chapter. Touching o once skips to the start
of the current chapter. Touching it again will
skip to the previous chapter.
Chapter numbers are displayed for eight sec-
onds.
1 Source icon
Shows which source has been selected.
2 DVD-V indicator
Shows when a DVD video is playing.
3 Title number indicator
Shows the title currently playing.
#
You can also skip back or forward to another
chapter by moving the joystick left or right.
4 Chapter number indicator
Shows the chapter currently playing.
4
Touch d to display m and n.
Touch d until m and n appear in the dis-
play.
5 Play time indicator
Shows the elapsed playing time of the cur-
rent chapter.
5
To perform fast forward or reverse,
keep touching m or n.
If you keep touching m or n for five sec-
onds, the icon m or n changes into rever-
sal indication. When this happens, fast
reverse/fast forward continues even if you re-
lease m or n. To resume playback at a de-
sired point, touch f.
6 Viewing angle indicator
Shows which viewing angle has been se-
lected.
7 Subtitle language indicator
Shows which subtitle language has been
selected.
#
You can also perform fast reverse/fast forward
by holding the joystick left or right.
27
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
05
Playing DVD video discs
#
Fast forward/fast reverse may not be possible
Skipping back or forward
to another title
at certain locations on some discs. If this hap-
pens, normal playback automatically resumes.
%
To skip back or forward to another title,
touch a or b.
Note
Touching a skips to the start of the next title.
Touching b skips to the start of the previous
title.
If you do not use the touch panel keys within 30
seconds, they will be hidden automatically.
Title numbers are displayed for eight seconds.
#
You can also skip back or forward to another
title by moving the joystick up or down.
Operating the DVD menu
Some DVDs allow you to select from the disc
contents using a menu.
Stopping playback
!
You can display the menu by touching
MENU or TOP.M while a disc is playing.
Touching either of these keys again lets you
start playback from the location selected
from the menu. For details, refer to the in-
structions provided with the disc.
%
#
Touch g.
When you stop DVD playback by touching g,
that location on the disc is memorized, enabling
playback from that point when you play the disc
again.
!
If you switch the remote control operation
mode to DVD, the joystick on the remote
control can also operate the DVD menu.
(Refer to page 17.)
#
To play back the disc again, touch f.
1
Touch
to display touch panel keys
ꢀ ꢁ
to operate the DVD menu.
When the touch panel keys are not displayed,
you can display them by touching the screen.
#
2
Touch a, b, c or d to select the desired
menu item.
3
Touch ENTER.
Playback starts from the selected menu item.
#
The way to display the menu differs depending
on the disc.
28
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Playing DVD video discs
05
1
Touch A.MENU and FUNCTION and then
Introduction of advanced
DVD video operation
touch REPEAT.
2
Touch any of the following touch panel
keys to select the repeat range.
!
!
!
TITLE ꢃ Repeat just the current title
CHAPTER ꢃ Repeat just the current chapter
DISC ꢃ Play through the current disc
Notes
!
!
If you perform chapter search or fast forward/
reverse, the repeat play range changes to
DISC.
You cannot operate repeating play when
1
1 Function display
Shows the function names.
%
Touch A.MENU and then touch
FUNCTION to display the function names.
The function names are displayed and oper-
able ones are highlighted.
Pausing DVD video playback
Pause lets you temporarily stop disc playback.
#
When A.MENU is not displayed, you can dis-
play it by touching the screen.
You can also display MENU by clicking the
joystick.
#
%
Touch f during playback.
The icon e is displayed and playback is
#
To go to the next group of function names,
paused, letting you view a still image.
touch NEXT.
#
names, touch PREV.
#
To resume playback at the same point that you
To return to the previous group of function
turned pause on, touch f again.
#
#
To return to the previous display, touch BACK.
To return to the playback display, touch ESC.
Notes
!
!
You can also turn pause function on or off
using PAUSE. To display PAUSE, touch
A.MENU and then touch FUNCTION.
Depending on the disc and the playback loca-
tion on the disc, the icon may be displayed,
indicating that still playback is not possi-
ble.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
Repeating play
There are three repeat play ranges for the DVD
playback: DISC (disc repeat), TITLE (title re-
peat) and CHAPTER (chapter repeat).
Frame-by-frame playback
This lets you move ahead one frame at a time
during playback.
29
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
05
Playing DVD video discs
%
Touch r during playback.
Searching for a desired
scene, starting playback
from a specified time
Each time you touch r, you move ahead one
frame.
#
To return to normal playback, touch f.
You can use the search function to search for
a desired scene by specifying a title or chapter,
and the time search function to specify the
time on a disc at which play starts.
Notes
!
Depending on the disc and the playback loca-
tion on the disc, the icon may be displayed,
indicating that frame-by-frame playback is not
possible.
With some discs, images may be unclear dur-
ing frame-by-frame playback.
!
Chapter search and time search are not
possible when disc playback has been
stopped.
!
1
Touch A.MENU and FUNCTION and then
SEARCH.
2
Touch TITLE (title), CHAPTER (chapter)
Slow motion playback
or TIME (time).
This lets you slow down playback speed.
3
Touch 0ꢂ9 to input the desired num-
ber.
ꢃ
ꢁ
1
Keep touching r until
is displayed
For titles and chapters
during playback.
!
!
!
To select 3, touch 3.
To select 10, touch 1 and 0 in that order.
To select 23, touch 2 and 3 in that order.
ꢃ
ꢁ
The icon
is displayed, forward slow motion
playback begins.
#
To return to normal playback, touch f.
For time (time search)
!
!
To select 21 minutes 43 seconds, touch 2,
1, 4 and 3 in that order.
To select 1 hour 11 minutes, convert the
time into 71 minutes 00 seconds and touch
7, 1, 0 and 0 in that order.
2
Touch q or r to adjust playback
speed during slow motion playback.
Each time you touch q or r it changes the
speed in four steps in the following order:
1/16ꢄ1/8ꢄ1/4ꢄ1/2
#
#
To cancel the inputted numbers, touch C.
You can also input the desired number by
using the joystick and 0-9.
Notes
!
!
There is no sound during slow motion play-
back.
Depending on the disc and the playback loca-
tion on the disc, the icon may be displayed,
indicating that slow motion playback is not
possible.
With some discs, images may be unclear dur-
ing slow motion playback.
Reverse slow motion playback is not possi-
ble.
4
While the inputted number is dis-
played, touch ENTER.
This starts playback from the selected scene.
Notes
!
!
!
With discs featuring a menu, you can also
touch MENU or TOP.M and then make selec-
tions from the displayed menu.
30
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Playing DVD video discs
05
!
With some discs, the icon may be dis-
played, indicating that titles, chapters and
time cannot be specified.
!
!
You can also switch between languages/audio
systems using DVD SETUP. For details, refer
Only digital output of DTS audio is possible. If
this unitꢀs optical digital outputs are not con-
nected, DTS audio will not be output, so select
an audio setting other than DTS.
Display indications such as Dolby D and
5.1ch indicate the audio system recorded on
the DVD. Depending on the setting, playback
may not be with the same audio system as
that indicated.
Specifying title
You can use the direct search function to
search for a desired scene by specifying a title.
!
!
!
Only the remote control can operate this
function. To perform this function, switch
the remote control operation mode to DVD.
(Refer to page 17.)
Touching AUDIO during fast forward/fast re-
verse, pause or slow motion playback returns
you to normal playback.
%
Press 0ꢁ10 corresponding to a desired
title number when the disc is stopped.
Title number is displayed for eight seconds
and playback starts from the selected title.
!
!
!
To select 3, press 3.
Changing the subtitle
language during playback
(Multi-subtitle)
To select 10, press 10 and 0 in that order.
To select 23, press 10, 10 and 3 in that
order.
With DVDs featuring multi-subtitle recordings,
you can switch between subtitle languages
during playback.
Changing audio language
during playback (Multi-audio)
%
Touch SUB.T during playback.
Each time you touch SUB.T it switches be-
tween subtitle languages.
DVDs can provide audio playback with differ-
ent languages and different systems (Dolby Di-
gital, DTS etc.). With DVDs featuring multi-
audio recordings, you can switch between lan-
guages/audio systems during playback.
Notes
2
!
!
!
!
The number in the
mark on a DVDꢀs pack-
age indicates the number of recorded subtitle
languages.
With some DVDs, switching between subtitle
languages may only be possible using a menu
display.
You can also switch between subtitle lan-
guages using DVD SETUP. For details, refer to
Touching SUB.T during fast forward/fast re-
verse, pause or slow motion playback returns
you to normal playback.
%
Touch AUDIO during playback.
Each time you touch AUDIO it switches be-
tween audio systems.
Notes
!
!
The number in the
2
mark on a DVDꢀs pack-
age indicates the number of recorded lan-
guages/audio systems.
With some DVDs, switching between lan-
guages/audio systems may only be possible
using a menu display.
31
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
05
Playing DVD video discs
the oldest bookmark is replaced by the new
one.
Changing the viewing angle
during playback (Multi-angle)
With DVDs featuring multi-angle (scenes shot
from multiple angles) recordings, you can
switch among viewing angles during play-
back.
#
To clear the bookmark on a disc, press and
hold BOOKMARK (BOOK.M) during playback.
You can also bookmark a disc by pressing and
#
holding EJECT at the point you want to bookmark.
Next time you load the disc, playback will resume
from the bookmarked point. Note that you can
only bookmark one disc using this method. To
clear the bookmark on a disc, press EJECT.
!
During playback of a scene shot from mul-
tiple angles, the angle icon is dis-
played. Turn angle icon display on or off
%
Touch ANGLE during playback of a
Selecting audio output
You can switch between stereo and monaural
audio output.
scene shot from multiple angles.
Each time you touch ANGLE it switches be-
tween angles.
!
!
This function is possible only with Linear
PCM sound.
This function is not possible when disc
playback has been stopped.
Notes
!
!
The
mark on a DVDꢀs package indicates it
features multi-angle scenes. The number in
the mark indicates the number of angles
3
1
Touch A.MENU and FUNCTION and then
3
touch NEXT.
from which scenes were shot.
Touching ANGLE during fast forward/fast re-
verse, pause or slow motion playback returns
you to normal playback.
2
3
Touch L/R SELECT.
Touch L+R (left and right), LEFT (left) or
RIGHT (right).
Resume playback (Bookmark)
Note
The Bookmark function lets you resume play-
back from a selected scene the next time the
disc is loaded.
Depending on the disc and the playback location
on the disc, the icon may be displayed, indicat-
ing that operating this function is not possible.
!
To perform this function, switch the remote
control operation mode to DVD. (Refer to
page 17.)
%
During playback, press
BOOKMARK (BOOK.M) at the point you
want to resume playback next time.
The selected scene will be bookmarked so that
playback resumes from that point next time.
You can bookmark up to five discs. After that,
32
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Playing Video CDs
06
#
With a Video CD featuring the PBC (playback
Watching a Video CD
control) function, a menu is displayed.
1
3
4
2
2
Switch the remote control operation
mode to DVD and then press 0ꢁ10 to select
the desired menu item.
Playback starts from the selected menu item.
#
When the menu is two or more pages long,
touch o or p to switch between displays.
You can display the menu by pressing
#
RETURN during PBC playback. For details, refer
to the instructions provided with the disc.
#
After operating the menu, we recommend
5
that you switch remote control operation mode to
AVX. (Refer to page 17.)
These are the basic steps necessary to play a
Video CD with your DVD player. More ad-
vanced Video CD operation is explained start-
ing on page 35.
3
Touch the screen to display the touch
panel keys.
4
To skip back or forward to another
1 Source icon
Shows which source has been selected.
track, touch o or p.
Touching p skips to the start of the next
track. Touching o once skips to the start of
the current track. Touching it again will skip to
the previous track.
2 V-CD indicator
Shows when a Video CD is playing.
Track numbers are displayed for eight sec-
onds.
3 Track number indicator
Shows the track currently playing.
#
You can also skip back or forward to another
track by moving the joystick left or right.
During PBC playback, a menu may be dis-
played if you perform these operations.
4 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
#
5
Touch d to display m and n.
5 Audio output indicator
Shows the output channel selected cur-
rently.
Touch d until m and n appear in the dis-
play.
6
To perform fast forward or reverse,
1
Press AV SOURCE to select the DVD
keep touching m or n.
player.
If you keep touching m or n for five sec-
onds, the icon m or n changes into rever-
sal indication. When this happens, fast
reverse/fast forward continues even if you re-
lease m or n. To resume playback at a de-
sired point, touch f.
Press AV SOURCE until DVD player is selected
as the source.
#
lect the DVD player. Insert a disc in the unit.
(Refer to page 20.)
If no disc is loaded in the unit, you cannot se-
33
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
06
Playing Video CDs
#
You can also perform fast reverse/fast forward
Stopping playback
by holding the joystick left or right.
#
at certain locations on some discs. If this hap-
pens, normal playback automatically resumes.
%
#
Touch g.
Fast forward/fast reverse may not be possible
When you stop Video CD playback (during
PBC playback only) by touching g, that location
on the disc is memorized, enabling playback
from that point when you play the disc again.
Note
#
To play back the disc again, touch f.
If you do not use the touch panel keys within 30
seconds, they will be hidden automatically.
PBC playback
During playback of Video CDs featuring PBC
(Playback Control), PBC ON is displayed. Dur-
ing such playback, search and time search
functions cannot be used nor can you select
the range for repeat play.
Note
PBC playback of Video-CD cannot be
cancelled.
Operating the menu
With Video CDs featuring PBC (playback con-
trol) function, you can operate a menu.
%
Switch the remote control operation
mode to DVD and then press 0ꢁ10 to select
the desired menu item.
Playback starts from the selected menu item.
#
When the menu is two or more pages long,
touch o or p to switch between displays.
You can display the menu by pressing
#
RETURN during PBC playback. For details, refer
to the instructions provided with the disc.
#
After operating the menu, we recommend
that you switch remote control operation mode to
AVX. (Refer to page 17.)
34
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Playing Video CDs
06
!
During playback of Video CDs featuring
PBC (playback control), this function can-
not be operated.
Introduction of advanced
Video CD operation
1
Touch A.MENU and FUNCTION and then
touch REPEAT.
2
Touch either of the following touch
panel keys to select the repeat range.
!
!
TRACK ꢃ Repeat just the current track
DISC ꢃ Repeat the current disc
1
Note
If you perform track search or fast forward/re-
verse, the repeat play range changes to DISC.
1 Function display
Shows the function names.
%
Touch A.MENU and then touch
FUNCTION to display the function names.
The function names are displayed and oper-
able ones are highlighted.
Pausing Video CD playback
Pause lets you temporarily stop disc playback.
#
When A.MENU is not displayed, you can dis-
play it by touching the screen.
You can also display MENU by clicking the
joystick.
%
Touch f during playback.
#
The icon e is displayed and playback is
paused, letting you view a still image.
#
To go to the next group of function names,
#
To resume playback at the same point that you
touch NEXT.
#
turned pause on, touch f again.
To return to the previous group of function
names, touch PREV.
Notes
#
#
To return to the previous display, touch BACK.
To return to the playback display, touch ESC.
!
!
You can also turn pause function on or off
using PAUSE. To display PAUSE, touch
A.MENU and then touch FUNCTION.
Depending on the disc and the playback loca-
tion on the disc, the icon may be displayed,
indicating that still playback is not possi-
ble.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
Repeating play
There are two repeat play ranges for the Video
CD playback: TRACK (track repeat) and DISC
(disc repeat).
Frame-by-frame playback
This lets you move ahead one frame at a time
during playback.
35
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
06
Playing Video CDs
%
Touch r during playback.
Searching for a desired
scene, starting playback
from a specified time
Each time you touch r, you move ahead one
frame.
#
To return to normal playback, touch f.
You can use the search function to search for
a desired scene by specifying a track, and the
time search function to specify the time on a
disc at which play starts.
Notes
!
Depending on the disc and the playback loca-
tion on the disc, the icon may be displayed,
indicating that frame-by-frame playback is not
possible.
With some discs, images may be unclear dur-
ing frame-by-frame playback.
!
!
1
During playback of Video CDs featuring
PBC (playback control), this function can-
not be operated.
Time search is not possible when disc play-
back has been stopped.
!
Touch A.MENU and FUNCTION and then
SEARCH.
Slow motion playback
This lets you slow down playback speed.
2
Touch TRACK (track) or TIME (time).
Touch 0ꢂ9 to input the desired num-
ber.
For tracks
3
ꢃ
1
Keep touching r until
is displayed
ꢁ
during playback.
The icon
playback begins.
#
ꢃ
ꢁ
is displayed, forward slow motion
!
!
!
To select 3, touch 3.
To select 10, touch 1 and 0 in that order.
To select 23, touch 2 and 3 in that order.
To return to normal playback, touch f.
For time (time search)
2
Touch q or r to adjust playback
!
To select 21 minutes 43 seconds, touch 2,
speed during slow motion playback.
Each time you touch q or r it changes the
speed in four steps in the following order:
1/16ꢄ1/8ꢄ1/4ꢄ1/2
1, 4 and 3 in that order.
!
To select 1 hour 11 minutes, convert the
time into 71 minutes 00 seconds and touch
7, 1, 0 and 0 in that order.
#
#
To cancel the inputted numbers, touch C.
You can also input the desired number by
Notes
!
!
There is no sound during slow motion play-
back.
Depending on the disc and the playback loca-
tion on the disc, the icon may be displayed,
indicating that slow motion playback is not
possible.
using the joystick and 0-9.
4
While the inputted number is dis-
played, touch ENTER.
This starts playback from the selected
scene.
!
!
With some discs, images may be unclear dur-
ing slow motion playback.
Reverse slow motion playback is not possi-
ble.
36
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Playing Video CDs
06
Selecting audio output
You can switch between stereo and monaural
audio output.
%
Press AUDIO during playback.
Press AUDIO repeatedly to switch between
the following outputs:
L+R (left and right channels)ꢄL (left channel)
ꢄR (right channel)
Note
You can also perform the same operations using
L/R SELECT. To display L/R SELECT, touch
A.MENU and FUNCTION and then touch
NEXT.
37
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
07
Playing CDs
#
If no disc is loaded in the unit, you cannot se-
Listening to a CD
lect the DVD player. Insert a disc in the unit.
(Refer to page 20.)
1
3
4
2
2
Touch the screen to display the touch
panel keys.
3
To skip back or forward to another
track, touch o or p.
Touching p skips to the start of the next
track. Touching o once skips to the start of
the current track. Touching it again will skip to
the previous track.
6
5
#
You can also skip back or forward to another
track by moving the joystick left or right.
These are the basic steps necessary to play a
CD with your DVD player. More advanced CD
operation is explained starting on the next
4
Touch d to display m and n.
Touch d until m and n appear in the dis-
play.
1 Source icon
Shows which source has been selected.
5
To perform fast forward or reverse,
keep touching m or n.
You can also perform fast reverse/fast forward
#
2 CD indicator
Shows when a CD is playing.
by holding the joystick left or right.
Notes
3 Track number indicator
Shows the track currently playing.
!
!
When playing discs with MP3/WMA files and
audio data (CD-DA) such as CD-EXTRA and
MIXED-MODE CDs, both types can be played
only by switching mode between MP3/WMA
and CD-DA by touching DA·ROM or pressing
BAND/ESC. This function can be operated
only when the disc is playing.
If you do not use the touch panel keys within
30 seconds, they will be hidden auto-
matically.
4 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
5 Disc title indicator
Shows the title of the currently playing disc.
6 Repeat indicator
Shows when repeat range is selected to cur-
rent track.
1
Press AV SOURCE to select the DVD
Stopping playback
player.
%
#
Touch g.
Press AV SOURCE until DVD player is selected
as the source.
When you stop CD playback by touching g,
that location on the disc is memorized, enabling
38
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Playing CDs
07
playback from that point when you play the disc
again.
Introduction of advanced
CD operation
#
To play back the disc again, touch f.
1
1 Function display
Shows the function names.
%
Touch A.MENU and then touch
FUNCTION to display the function names.
The function names are displayed and oper-
able ones are highlighted.
#
When A.MENU is not displayed, you can dis-
play it by touching the screen.
You can also display MENU by clicking the
joystick.
#
#
To go to the next group of function names,
touch NEXT.
#
To return to the previous group of function
names, touch PREV.
#
#
To return to the previous display, touch BACK.
To return to the playback display, touch ESC.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
Repeating play
Repeat play lets you hear the same track over
again.
39
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
07
Playing CDs
1
Touch A.MENU and FUNCTION and then
3
When you find the desired track touch
touch REPEAT.
b to turn scan play off.
2
Touch either of the following touch
Note
panel keys to select the repeat range.
After scanning of a CD is finished, normal play-
back of the tracks will begin again.
!
!
TRACK ꢃ Repeat just the current track
DISC ꢃ Repeat the current disc
Notes
!
!
If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
When playing discs with MP3/WMA files and
audio data (CD-DA), repeat play performs
within the currently playing data type even if
DISC is selected.
Pausing CD playback
Pause lets you temporarily stop disc playback.
%
Touch f during playback.
PAUSE is displayed and playback is paused.
To resume playback at the same point that you
#
turned pause on, touch f again.
Note
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
You can also turn pause function on or off using
PAUSE. To display PAUSE, touch A.MENU and
then touch FUNCTION.
1
Touch A.MENU and FUNCTION and then
touch RANDOM.
Searching for a desired track
You can use the search function to specify a
track to search for a desired track.
2
Touch a to turn random play on.
Tracks will play in a random order.
To turn random play off, touch b.
#
1
Touch A.MENU and FUNCTION and then
SEARCH.
2
Touch TRACK.
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
3
ber.
!
Touch 0ꢂ9 to input the desired num-
To select 3, touch 3.
To select 10, touch 1 and 0 in that order.
To select 23, touch 2 and 3 in that order.
1
Touch A.MENU and FUNCTION and then
!
!
touch SCAN.
#
#
To cancel the inputted numbers, touch C.
You can also input the desired number by
2
Touch a to turn scan play on.
The first 10 seconds of each track is played.
using the joystick and 0-9.
40
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Playing CDs
07
4
While the inputted number is dis-
touch b it will display a letter in the reverse
played, touch ENTER.
order, such as Z Y X ... C B A.
This starts playback from the selected track.
Entering disc titles
You can input CD titles and display the title.
The next time you insert a CD for which you
have entered a title, the title of that CD will be
displayed.
6
Touch d to move the cursor to the next
Use the disc title input feature to store up to
48 CD titles in the unit. Each title can be up to
10 characters long.
character position.
When the desired letter is displayed, touch d
to move the cursor to the next position and
then select the next letter. Touch c to move
backwards in the display.
!
When playing a CD TEXT disc, you cannot
switch to TITLE EDIT. The disc title will
have already been recorded on a CD TEXT
disc.
7
Touch OK to store the entered title in
!
If no title has been entered for the currently
playing disc, NO TITLE is displayed.
memory.
8
play.
Touch ESC to return to the playback dis-
1
Play the CD that you want to enter a
title for.
Notes
2
Touch A.MENU and FUNCTION and then
!
!
Titles remain in memory, even after the disc
has been removed from the unit, and are re-
called when the disc is reinserted.
After data for 48 discs has been stored in
memory, data for a new disc will overwrite the
oldest one.
touch NEXT.
3
4
Touch TITLE EDIT.
Touch ABC to select the desired charac-
ter type.
Touch ABC repeatedly to switch between the
following character types:
Alphabet (upper case), numbers and symbols
ꢄAlphabet (lower case)ꢄEuropean letters,
such as those with accents (e.g., á, à, ä, ç)
Using CD TEXT functions
Some discs have certain information encoded
on the disc during manufacture. These discs
may contain such information as the CD title,
track title, artistꢀs name and playback time
and are called CD TEXT discs. Only these spe-
cially encoded CD TEXT discs support the
functions listed below.
#
You can select to input numbers and symbols
by touching 123.
5
Touch a or b to select a letter of the al-
phabet.
Each time you touch a it will display a letter of
the alphabet in AB C ... X Y Z , numbers and
symbols in 1 2 3 ... | } ¯ order. Each time you
41
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
07
Playing CDs
Displaying titles on CD TEXT discs
%
Touch DISP.
Touch DISP repeatedly to switch between the
following settings:
D.Title (disc title)ꢄD.Artist (disc artist name)
ꢄT.Title (track title)ꢄT.Artist (track artist
name)
#
If specific information has not been recorded
on a CD TEXT disc, NO XXXX will be displayed
(e.g., NO ARTIST).
Scrolling titles in the display
This unit can display the first 19 letters only of
D.Title, D.Artist, T.Title and T.Artist. When
the recorded information is longer than 19 let-
ters, you can scroll the text to the left so that
the rest of the title can be seen.
%
Keep touching DISP until the title be-
gins to scroll to the left.
The rest of the title will appear in the display.
Selecting tracks from the track
title list
Track title list lets you see the list of track titles
on a CD TEXT disc and select one of them to
play back.
1
Touch A.MENU and FUNCTION and then
touch TRACK LIST.
2
Touch PREV or NEXT to switch between
the lists of titles.
3
Touch your favorite track title.
That selection will begin to play.
42
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Playing MP3/WMA
08
7 Repeat indicator
Shows the selected repeat range.
Listening to MP3/WMA
1
4
5
2
3
1
Press AV SOURCE to select the DVD
player.
Press AV SOURCE until DVD player is selected
as the source.
#
If no disc is loaded in the unit, you cannot se-
lect the DVD player. Insert a disc in the unit.
(Refer to page 20.)
2
Touch the screen to display the touch
panel keys.
6
7
3
To skip back or forward to another
These are the basic steps necessary to play an
MP3/WMA with your built-in DVD player. More
advanced MP3/WMA operation is explained
starting on page 45.
track, touch o or p.
Touching p skips to the start of the next
track. Touching o once skips to the start of
the current track. Touching it again will skip to
the previous track.
1 Source icon
Shows which source has been selected.
#
You can also skip back or forward to another
track by moving the joystick left or right.
2 ROM indicator
4
Touch d to display a, b, m and n.
Shows when the MP3/WMA file is playing.
When playing discs with MP3/WMA files
and audio data (CD-DA) such as CD-EXTRA
and MIXED-MODE CDs, CD/ROM is dis-
played.
Touch d until a, b, m and n appear in
the display.
5
To perform fast forward or reverse,
keep touching m or n.
You can also perform fast reverse/fast forward
by holding the joystick left or right.
#
3 Folder number indicator
Shows the number of folder currently play-
ing.
#
#
There is no sound on fast forward or reverse.
This is fast forward and reverse operation only
for the file being played. This operation is can-
celed when the previous or next file is reached.
4 Track number indicator
Shows the track (file) currently playing.
6
#
Touch a or b to select a folder.
You can also select a folder by moving the joy-
5 Play time indicator
Shows the elapsed playing time of the cur-
rent track (file).
stick up or down.
To return to folder 001 (ROOT), press and hold
#
BAND/ESC. However, if folder 001 (ROOT) con-
tains no files, playback commences with folder
002.
6 Folder name indicator
Shows the name of folder currently playing.
#
You cannot select a folder that does not have
an MP3/WMA file recorded in it.
43
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
08
Playing MP3/WMA
Stopping playback
Notes
%
#
Touch g.
!
When playing discs with MP3/WMA files and
audio data (CD-DA) such as CD-EXTRA and
MIXED-MODE CDs, both types can be played
only by switching mode between MP3/WMA
and CD-DA by touching DA·ROM or pressing
BAND/ESC. This function can be operated
only when the disc is playing.
When you stop MP3/WMA playback by touch-
ing g, that location on the disc is memorized, en-
abling playback from that point when you play
the disc again.
#
To play back the disc again, touch f.
!
!
!
If you have switched between playback of
MP3/WMA files and audio data (CD-DA), play-
back starts at the first track on the disc.
This DVD player can play back an MP3/WMA
file recorded on CD-ROM. (Refer to page 75
for files that can be played back.)
There is sometimes a delay between starting
up CD playback and the sound being issued.
When being read in, FORMAT READis dis-
played.
!
Playback is carried out in order of file number.
Folders are skipped if they contain no files. (If
folder 001 (ROOT) contains no files, playback
commences with folder 002.)
!
!
This unit does not play back WMA files re-
corded as VBR (variable bit rate).
When playing back files recorded as VBR
(variable bit rate) files, the play time will not be
correctly displayed if fast forward or reverse
operations are used.
!
!
If the inserted disc contains no files that can
be played back, NO AUDIO is displayed.
If the inserted disc contains WMA files that
are protected by digital rights management
(DRM) , TRK SKIPPED is displayed while the
protected file is skipped.
!
!
If all the files on the inserted disc are secured
by DRM, PROTECT is displayed.
When a disc contains both WMA files which
are protected by DRM and audio data (CD-
DA), both types cannot be switched. In this
case, only audio data will be played back.
There is no sound on fast forward or reverse.
If you do not use the touch panel keys within
30 seconds, they will be hidden auto-
matically.
!
!
44
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Playing MP3/WMA
08
TRACK (one-track repeat) and DISC (repeat all
tracks).
Introduction of advanced
built-in DVD player (MP3/
WMA) operation
1
Touch A.MENU and FUNCTION and then
touch REPEAT.
2
Touch any of the following touch panel
keys to select the repeat range.
!
!
!
TRACK ꢃ Repeat just the current track
FOLDER ꢃ Repeat the current folder
DISC ꢃ Repeat all tracks
Notes
1
!
!
If you select another folder during repeat play,
the repeat play range changes to DISC.
If you perform track search or fast forward/re-
verse during TRACK, the repeat play range
changes to FOLDER.
When FOLDER is selected, it is not possible to
play back a subfolder of that folder.
When playing discs with MP3/WMA files and
audio data (CD-DA), repeat play performs
within the currently playing data type even if
DISC is selected.
1 Function display
Shows the function names.
%
Touch A.MENU and then touch
!
!
FUNCTION to display the function names.
The function names are displayed and oper-
able ones are highlighted.
When A.MENU is not displayed, you can dis-
play it by touching the screen.
You can also display MENU by clicking the
joystick.
#
#
#
To go to the next group of function names,
touch NEXT.
Playing tracks in a random
order
Random play lets you play back tracks in a
random order within the repeat range,
FOLDER and DISC.
#
To return to the previous group of function
names, touch PREV.
#
#
To return to the previous display, touch BACK.
To return to the playback display, touch ESC.
Note
1
Select the repeat range.
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
2
Touch A.MENU and FUNCTION and then
touch RANDOM.
3
Touch a to turn random play on.
Repeating play
For MP3/WMA playback, there are three re-
peat play ranges: FOLDER (folder repeat),
Tracks will play in a random order within the
previously selected FOLDER or DISC ranges.
#
To turn random play off, touch b.
45
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
08
Playing MP3/WMA
Scanning folders and tracks
Searching for a desired
track in the current folder
You can use the search function to specify a
track to search for a desired track.
While you are using FOLDER, the beginning of
each track in the selected folder plays for
about 10 seconds. When you are using DISC,
the beginning of the first track of each folder
is played for about 10 seconds.
!
Track search is not possible when disc play-
back has been stopped.
1
Select the repeat range.
1
Touch A.MENU and FUNCTION and then
SEARCH.
2
Touch A.MENU and FUNCTION and then
2
Touch TRACK.
touch SCAN.
3
ber.
!
Touch 0ꢂ9 to input the desired num-
3
Touch a to turn scan play on.
The first 10 seconds of each track of the cur-
rent folder (or the first track of each folder) is
played.
To select 3, touch 3.
To select 10, touch 1 and 0 in that order.
To select 23, touch 2 and 3 in that order.
!
!
#
#
To cancel the inputted numbers, touch C.
You can also input the desired number by
4
When you find the desired track (or
folder) touch b to turn scan play off.
using the joystick and 0-9.
Note
4 While the inputted number is dis-
played, touch ENTER.
This starts playback from the selected track.
After track or folder scanning is finished, normal
playback of the tracks will begin again.
Displaying text information
on MP3/WMA disc
Pausing MP3/WMA playback
Pause lets you temporarily stop disc playback.
Text information recorded on a MP3/WMA
disc can be displayed.
%
Touch f during playback.
PAUSE is displayed and playback is paused.
To resume playback at the same point that you
%
Touch DISP.
#
Touch DISP repeatedly to switch between the
following settings:
turned pause on, touch f again.
Folder (folder name)ꢄFile (file name)
ꢄT.Title (track title)ꢄArtist (artist name)
ꢄAlbum (album title)ꢄComment (comment)
ꢄBitRate (bit rate)
Note
You can also turn pause function on or off using
PAUSE. To display PAUSE, touch A.MENU and
then touch FUNCTION.
#
When playing back WMA files, album title and
comment are not displayed.
When playing back MP3 files recorded as VBR
(variable bit rate) files, the bit rate value is not dis-
#
46
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Playing MP3/WMA
08
played even after switching to bit rate. (VBR will
be displayed.)
viewed. Repeat 2 and 3 to select the desired file
name.
#
If specific information has not been recorded
#
To return to the previous list (the folder one
on an MP3/WMA disc, NO XXXX will be dis-
level higher), touch
.
played (e.g., NO NAME).
Scrolling text information
in the display
This unit can display the first 19 letters only of
Folder, File, T.Title, Artist, Album and
Comment. When the recorded information is
longer than 19 letters, you can scroll the text
to the left so that the rest of the text informa-
tion can be seen.
%
Keep touching DISP until the text infor-
mation begins to scroll to the left.
The rest of the text information will appear in
the display.
Selecting tracks from the
file name list
File name list lets you see the list of file names
(or folder names) and select one of them to
playback.
1
Touch A.MENU and FUNCTION and then
touch FL&TR LIST.
2
Touch PREV or NEXT to switch between
the lists of names.
3
Touch your favorite file name (or folder
name).
When you select the file, that selection will
begin to play.
#
When you have selected a folder, a list of the
names of the files (or the folders) in it can be
47
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
09
Multi-CD Player
2
Touch the screen to display the touch
Listening to a CD
panel keys.
1
3
4
2
3
Touch any of 01ꢂ06 to select a disc you
want to listen to.
If you want to select a disc located at 7 to 12,
touch PREV or NEXT to display 07ꢂ12.
#
When 01ꢂ06 and 07ꢂ12 are not displayed,
you can display them by touching DISP.
You can also sequentially select a disc by
using a/b.
#
4
To skip back or forward to another
5
track, touch c or d.
Touching d skips to the start of the next track.
Touching c once skips to the start of the cur-
rent track. Touching again will skip to the pre-
vious track.
Only when using this unit with ADD-ON
mode (M), you can perform the following
operations by this unit.
You can use this unit to control a multi-CD
player, which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on the next
#
You can also skip back or forward to another
track by moving the joystick left or right.
5
To perform fast forward or reverse,
keep touching c or d.
You can also perform fast reverse/fast forward
#
by holding the joystick left or right.
1 Source icon
Shows which source has been selected.
Notes
2 Disc number indicator
Shows the disc currently playing.
!
!
When the multi-CD player performs the pre-
paratory operations, READY is displayed.
If the multi-CD player does not operate prop-
erly, an error message such as ERROR-02
may be displayed. Refer to the multi-CD player
ownerꢀs manual.
If there are no discs in the multi-CD player ma-
gazine, NO DISC is displayed.
If you do not use the touch panel keys within
30 seconds, they will be hidden auto-
matically.
3 Track number indicator
Shows the track currently playing.
4 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
!
!
5 Disc list display
Shows the disc title list.
1
Touch the source icon and then touch
M-CD to select the multi-CD player.
When the source icon is not displayed, you
#
can display it by touching the screen.
48
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Multi-CD Player
09
50-disc multi-CD player
Introduction of advanced
multi-CD player operation
Only those functions described in this manual
are supported for 50-disc multi-CD players.
This unit is not designed to operate disc title
list functions with a 50-disc multi-CD player.
1
1 Function display
Shows the function names.
%
Touch A.MENU and then touch
FUNCTION to display the function names.
The function names are displayed and oper-
able ones are highlighted.
#
When A.MENU is not displayed, you can dis-
play it by touching the screen.
You can also display MENU by clicking the
joystick.
#
#
To go to the next group of function names,
touch NEXT.
#
To return to the previous group of function
names, touch PREV.
#
#
To return to the previous display, touch BACK.
To return to the playback display, touch ESC.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
49
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
09
Multi-CD Player
Repeating play
3
Touch a to turn random play on.
Tracks will play in a random order within the
previously selected M-CD or DISC ranges.
There are three repeat play ranges for the
multi-CD player: M-CD (multi-CD player re-
peat), TRACK (one-track repeat) and DISC
(disc repeat).
#
To turn random play off, touch b.
1
Touch A.MENU and FUNCTION and then
Scanning CDs and tracks
touch REPEAT.
While you are using DISC, the beginning of
each track on the selected disc plays for about
10 seconds. When you are using M-CD, the
beginning of the first track of each disc is
played for about 10 seconds.
2
Touch j to select the repeat range.
Touch j repeatedly until the desired repeat
range appears in the display.
!
M-CD ꢃ Repeat all discs in the multi-CD
player
!
!
TRACK ꢃ Repeat just the current track
DISC ꢃ Repeat the current disc
1
Select the repeat range.
#
You can also select the repeat range by mov-
ing the joystick left or right.
2
Touch A.MENU and FUNCTION and then
touch SCAN.
Notes
3
Touch a to turn scan play on.
!
!
If you select other discs during repeat play,
the repeat play range changes to M-CD.
If you perform track search or fast forward/re-
verse during TRACK, the repeat play range
changes to DISC.
The first 10 seconds of each track of the cur-
rent disc (or the first track of each disc) is
played.
4
When you find the desired track (or
disc) touch b to turn scan play off.
Note
Playing tracks in a random
order
After track or disc scanning is finished, normal
playback of the tracks will begin again.
Random play lets you play back tracks in a
random order within the repeat range, M-CD
and DISC.
Pausing CD playback
Pause lets you temporarily stop disc playback.
1
Select the repeat range.
1
Touch A.MENU and FUNCTION and then
2
Touch A.MENU and FUNCTION and then
touch PAUSE.
touch RANDOM.
2
Touch a to turn pause on.
Play of the current track pauses.
#
To turn pause off, touch b.
50
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Multi-CD Player
09
Playback from your ITS playlist
Using ITS playlists
ITS play lets you listen to the tracks that you
have entered into your ITS playlist. When you
turn on ITS play, tracks from your ITS playlist
in the multi-CD player will begin to play.
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
1
Select the repeat range.
2
Touch A.MENU and FUNCTION and then
Creating a playlist with ITS
programming
touch NEXT.
You can use ITS to enter and play back up to
99 tracks per disc, up to 100 discs (with the
disc titles). (With multi-CD players sold before
the CDX-P1250 and CDX-P650, up to 24 tracks
can be stored in the playlist.)
3
4
Touch ITS PLAY.
Touch a to turn ITS play on.
Playback begins of those tracks from your
playlist within the previously selected M-CD or
DISC ranges.
1
Play a CD that you want to program.
#
To turn ITS play off, touch b.
Touch a or b to select the CD.
2
Touch A.MENU and FUNCTION and then
Erasing a track from your ITS
playlist
touch NEXT.
When you want to delete a track from your ITS
playlist, you can if ITS play is on.
If ITS play is already on, skip to step 2.
3
4
Touch ITS MEMORY.
Touch c or d to select the desired
track.
1
Play the CD with the track you want to
delete from your ITS playlist, and turn ITS
play on.
Refer to Playback from your ITS playlist on this
page.
5
Touch a to store the currently playing
track in the playlist.
MEMORY is displayed briefly and the cur-
rently playing selection is added to your play-
list. The display then shows track number
again.
2
Touch A.MENU and FUNCTION and then
touch NEXT.
Note
3
4
Touch ITS MEMORY.
Touch c or d to select the desired
After data for 100 discs has been stored in mem-
ory, data for a new disc will overwrite the oldest
one.
track.
51
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
09
Multi-CD Player
5
Touch b to erase the track from your
switch to TITLE EDIT. The disc title will
have already been recorded on a CD TEXT
disc.
ITS playlist.
The currently playing selection is erased from
your ITS playlist and playback of the next track
from your ITS playlist begins.
1
Play the CD that you want to enter a
#
If there are no tracks from your playlist in the
title for.
current range, ITS EMPTY is displayed and nor-
Touch a or b to select the CD.
mal play resumes.
2
Touch A.MENU and FUNCTION and then
touch NEXT.
Erasing a CD from your ITS playlist
When you want to delete all tracks of a CD
from your ITS playlist, you can if ITS play is off.
3
4
Touch TITLE EDIT.
Touch ABC to select the desired charac-
ter type.
1
Play the CD that you want to delete.
Touch ABC repeatedly to switch between the
following character types:
Touch a or b to select the CD.
Alphabet (upper case), numbers and symbols
ꢄAlphabet (lower case)ꢄEuropean letters,
such as those with accents (e.g., á, à, ä, ç)
2
Touch A.MENU and FUNCTION and then
touch NEXT.
#
You can select to input numbers and symbols
3
4
Touch ITS MEMORY.
Touch b to erase all tracks on the cur-
by touching 123.
5
Touch a or b to select a letter of the al-
rently playing CD from your ITS playlist.
All tracks on the currently playing CD are
erased from your playlist and ALL CLEAR is
displayed.
phabet.
Each time you touch a it will display a letter of
the alphabet in AB C ... X Y Z , numbers and
symbols in 1 2 3 ... | } ¯ order. Each time you
touch b it will display a letter in the reverse
order, such as Z Y X ... C B A.
Using disc title functions
You can input CD titles and display the titles.
Then you can easily search for and play a de-
sired disc.
Entering disc titles
Use the disc title input feature to store up to
100 CD titles (with ITS playlist) into the multi-
CD player. Each title can be up to 10 charac-
ters long.
6
Touch d to move the cursor to the next
character position.
When the desired letter is displayed, touch d
to move the cursor to the next position and
then select the next letter. Touch c to move
backwards in the display.
!
When playing a CD TEXT disc on a CD TEXT
compatible multi-CD player, you cannot
52
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Multi-CD Player
09
7
Touch OK to store the entered title in
Displaying titles on CD TEXT discs
memory.
%
Touch DISP.
Touch DISP repeatedly to switch between the
following settings:
DISC LIST (disc list)ꢄD.Title (disc title)
ꢄD.Artist (disc artist name)ꢄT.Title (track
title)ꢄT.Artist (track artist name)
8
play.
Touch ESC to return to the playback dis-
Notes
#
If specific information has not been recorded
!
!
Titles remain in memory, even after the disc
has been removed from the magazine, and
are recalled when the disc is reinserted.
After data for 100 discs has been stored in
memory, data for a new disc will overwrite the
oldest one.
on a CD TEXT disc, NO XXXX will be displayed
(e.g., NO ARTIST).
Scrolling titles in the display
This unit can display the first 19 letters only of
D.Title, D.Artist, T.Title and T.Artist. When
the recorded information is longer than 19 let-
ters, you can scroll the text to the left so that
the rest of the title can be seen.
Displaying disc titles
You can display the title of any disc that has
had a disc title entered.
%
Keep touching DISP until the title be-
%
Touch DISP.
gins to scroll to the left.
The rest of the title will appear in the display.
Touch DISP repeatedly to switch between the
following settings:
DISC LIST (disc list)ꢄD.Title (disc title)
When you select D.Title, the title of the cur-
rently playing disc is shown in the display.
Selecting tracks from the track
title list
Track title list lets you see the list of track titles
on a CD TEXT disc and select one of them to
play back.
#
If no title has been entered for the currently
playing disc, NO TITLE is displayed.
Using CD TEXT functions
You can use these functions only with a CD
1
Touch A.MENU and FUNCTION and then
touch TRACK LIST.
TEXT compatible multi-CD player.
2
Touch PREV or NEXT to switch between
Some discs have certain information encoded
on the disc during manufacture. These discs
may contain such information as the CD title,
track title, artistꢀs name and playback time
and are called CD TEXT discs. Only these spe-
cially encoded CD TEXT discs support the
functions listed below.
the lists of titles.
3
Touch your favorite track title.
That selection will begin to play.
53
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
09
Multi-CD Player
Using compression and
bass emphasis
You can use these functions only with a multi-
CD player that supports them.
Using COMP (compression) and DBE (dy-
namic bass emphasis) functions lets you ad-
just the sound playback quality of the multi-
CD player. Each of the functions has a two-
step adjustment. The COMP function balances
the output of louder and softer sounds at high-
er volumes. DBE boosts bass levels to give
playback a fuller sound. Listen to each of the
effects as you select them and use the one
that best enhances the playback of the track
or CD that you are listening to.
1
Touch A.MENU and FUNCTION and then
touch COMP.
If the multi-CD player does not support
#
COMP/DBE, NO COMP is displayed when you at-
tempt to select it.
2
Touch j to select your favorite set-
ting.
Touch j repeatedly to switch between the
following settings:
COMP OFFꢄCOMP 1ꢄCOMP 2ꢄ
COMP OFFꢄDBE 1ꢄDBE 2
#
You can also select the desired setting by mov-
ing the joystick left or right.
54
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
TV tuner
10
2
Touch the screen to display the touch
Watching the television
panel keys.
1
3
4
2
3
Touch BAND to select a band.
Touch BAND repeatedly until the desired band
is displayed, TV1 or TV2.
4
To perform manual tuning, briefly
touch c or d.
The channels move up or down step by step.
#
You can also perform manual tuning by mov-
ing the joystick left or right.
5
5
To perform seek tuning, keep touching
c or d for about one second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
Only when using this unit with ADD-ON
mode (M), you can perform the following
operations by this unit.
You can use this unit to control a TV tuner,
which is sold separately.
For details concerning operation, refer to the
TV tunerꢀs operation manuals. This section
provides information on TV operations with
this unit which differs from that described in
the TV tunerꢀs operation manual.
#
You can cancel seek tuning by briefly touching
either c or d.
If you keep touching c or d you can skip
#
broadcasting channels. Seek tuning starts as
soon as you release the keys.
#
You can also perform seek tuning by holding
the joystick left or right.
1 Source icon
Note
Shows which source has been selected.
If you do not use the touch panel keys within 30
seconds, they will be hidden automatically.
2 Band indicator
Shows which band the TV tuner is tuned to.
3 Preset number indicator
Shows which preset has been selected.
4 Channel indicator
Shows which channel the TV tuner is tuned.
5 Preset list display
Shows the preset list.
1
Touch the source icon and then touch
TV to select the TV.
When the source icon is not displayed, you
can display it by touching the screen.
#
55
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
10
TV tuner
Storing the strongest
broadcast stations
sequentially
Storing and recalling
broadcast stations
If you touch any of the preset tuning keys
P01ꢂP12 you can easily store up to 12 broad-
cast stations for later recall with the touch of a
key.
%
When you find a station that you want
to store in memory, keep touching one of
preset tuning keys P01ꢂP12 until the pre-
set number stops flashing.
The number you have touched will flash in the
preset number indicator and then remain lit.
The selected station has been stored in mem-
ory.
The next time you touch the same preset tun-
ing key the station is recalled from memory.
1
1 Function display
Shows the function names.
#
To switch between P01ꢂP06 and P07ꢂP12,
touch PREV or NEXT.
When the touch panel keys are not displayed,
you can display them by touching the screen.
When P01ꢂP06 and P07ꢂP12 are not dis-
1
Touch A.MENU and FUNCTION and then
touch BSSM.
When A.MENU is not displayed, you can dis-
play it by touching the screen.
You can also display MENU by clicking the
joystick.
#
#
#
#
played, you can display them by touching DISP.
2
Touch a to turn BSSM on.
Notes
BSSM begins to flash. While BSSM is flashing
the 12 strongest broadcast stations will be
stored in order from the lowest channel up.
When finished, BSSM disappears.
!
!
Up to 24 stations, 12 for each of two TV bands,
can be stored in memory.
You can also use a and b to recall stations
assigned to preset tuning keys P01ꢂP12.
#
#
#
To cancel the storage process, touch b.
To return to the previous display, touch BACK.
To return to the TV picture, touch ESC.
Notes
!
!
Storing broadcast stations with BSSM may re-
place broadcast stations you have saved
using P01ꢂP12.
If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the TV picture.
56
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Setting up the DVD player
11
#
#
To return to the previous display, touch BACK.
To return to the playback display, touch ESC.
Introduction of DVD setup
adjustments
Note
If you do not operate the DVD setup function
within about 30 seconds, the display is automati-
cally returned to the playback display.
Setting the subtitle language
You can set a desired subtitle language. If the
selected subtitle language is recorded on the
DVD, subtitles are displayed in that language.
1
You can use this menu to change audio, subti-
tle, parental lock and other DVD settings.
!
When watching a DVD/Video CD on the
rear display independently, you cannot op-
erate this menu.
1
Touch SETUP and LANGUAGE and then
touch SUB. T LANG.
A subtitle language menu is displayed and the
currently set language is highlighted.
1 DVD setup menu display
#
To switch to the second language select
menu, touch NEXT.
To return to the first language select menu,
touch PREV.
Shows the DVD setup menu names.
#
1
Touch g.
SETUP will be displayed instead of MENU.
2
Touch the desired language.
2
Touch SETUP when the disc is stopped.
The DVD setup menu is displayed.
When SETUP is not displayed, you can display
it by touching the screen.
You can also display DVD SETUP by pressing
A subtitle language is set.
#
you select OTHERS on the next page.
If you have selected OTHERS, refer to When
#
#
Notes
MENU on the remote control when the disc is
stopped.
!
!
If the selected language is not recorded on
the disc, the language specified on the disc is
displayed.
You can also switch the subtitle language by
touching SUB.T during playback. (Refer to
Even if you use SUB.T to switch the subtitle
language, this does not affect the settings
here.
3
Touch any of LANGUAGE, VISUAL,
AUDIO or OTHERS to display the DVD
setup function names.
The DVD setup function names in selected
menu are displayed.
#
To display OTHERS, touch NEXT after touch-
!
ing SETUP.
#
To go to the next group of function names,
touch NEXT.
#
To return to the previous group of function
names, touch PREV.
57
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
11
Setting up the DVD player
!
Even if you use AUDIO to switch the audio
language, this does not affect the settings
here.
When you select OTHERS
When you select OTHERS, a language code
input display is shown. Refer to Language code
code of the desired language.
Setting the menu language
You can set the preferred language for dis-
plays of menus recorded on a disc.
1
#
#
Touch 0ꢂ9 to input the language code.
To cancel the inputted numbers, touch C.
You can also input the desired number by
using the joystick and 0-9.
1
Touch SETUP and LANGUAGE and then
2
While the inputted number is dis-
touch MENU LANG.
A menu language menu is displayed and the
currently set language is highlighted.
played, touch ENTER.
#
To switch to the second language select
menu, touch NEXT.
To return to the first language select menu,
touch PREV.
#
Setting the audio language
You can set the preferred audio language.
2
Touch the desired language.
1
Touch SETUP and LANGUAGE and then
The menu language is set.
#
you select OTHERS on this page.
touch AUDIO LANG.
An audio language menu is displayed and the
currently set language is highlighted.
If you have selected OTHERS, refer to When
#
To switch to the second language select
menu, touch NEXT.
To return to the first language select menu,
touch PREV.
Note
#
If the selected language is not recorded on the
disc, the language specified on the disc is dis-
played.
2
Touch the desired language.
The audio language is set.
#
If you have selected OTHERS, refer to When
you select OTHERS on this page.
Setting assist subtitles on
or off
Notes
Assist subtitles offer explanations for the au-
rally impaired. However, they are only dis-
played if they are recorded on the DVD.
You can turn assist subtitles on or off as de-
sired.
!
!
If the selected language is not recorded on
the disc, the language specified on the disc is
outputted.
You can also switch the audio language by
touching AUDIO during playback. (Refer to
1
Touch SETUP and LANGUAGE and then
touch NEXT.
58
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Setting up the DVD player
11
!
PANSCAN ꢃ The picture is cut short at the
2
Touch ASUB TITL.
right and left of the screen
3
Touch a to turn assist subtitles on.
#
To turn assist subtitles off, touch b.
Notes
!
!
When playing discs that do not specify
PANSCAN, playback is with LETTER BOX
even if you select PANSCAN setting. Confirm
Setting angle icon display
You can set it up so that the angle icon ap-
pears on scenes where the angle can be
switched.
16 : 9 LB
whether the disc package bears the
mark. (See page 12.)
Some discs do not enable changing of the TV
aspect. For details, refer to the discꢀs in-
structions.
1
Touch SETUP and VISUAL and then
touch M. ANGLE.
2
#
Touch a to turn angle icon display on.
To turn angle icon display off, touch b.
Setting the parentallock
Some DVD video discs let you use parental
lock to restrict the viewing of violent and adult-
oriented scenes by children. You can set the
parental lock level in steps as desired.
Setting the aspect ratio
!
When you set a parental lock level and then
play a disc featuring parental lock, code
number input indications may be dis-
played. In this case, playback will begin
when the correct code number is input.
There are two kinds of display. A wide screen
display has a width-to-height ratio (TV aspect)
of 16:9, while a regular display has a TV aspect
of 4:3. Be sure to select the correct TV aspect
for the display connected to REAR VIDEO
OUTPUT.
!
!
1
When using a regular display, select either
LETTER BOX or PANSCAN. Selecting 16 : 9
may result in an unnatural picture.
If you select the TV aspect, the unitꢀs dis-
play changes to the same setting.
Setting the code number and level
When you first use this function, register your
code number. If you do not register a code
number, parental lock will not operate.
1
Touch SETUP and VISUAL and then
Touch SETUP and VISUAL and then
touch PARENTAL.
touch TV ASPECT.
2
Touch 0ꢂ9 to input a four digit code
2
Touch any of the following touch panel
number.
keys to select the TV aspect.
!
!
16 : 9 ꢃ Wide screen picture (16:9) is dis-
played as it is (initial setting)
LETTER BOX ꢃ The picture is the shape of a
letterbox with black bands at the top and
bottom of the screen
3
While the inputted number is dis-
played, touch ENTER.
The code number is set, and you can now set
the level.
59
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
11
Setting up the DVD player
4
Touch any of 1ꢂ8 to select the desired
4
Touch any of 1ꢂ8 to select the desired
level.
level.
The parental lock level is set.
The new parental lock level is set.
!
!
LEVEL 8 ꢃ Playback of the entire disc is pos-
sible (initial setting)
LEVEL 7ꢃLEVEL 2 ꢃ Playback of discs for
children and non-adult-oriented discs is
possible
LEVEL 1 ꢃ Playback of discs for children
only is possible
If you forget your code number
Refer to Changing the level on this page, and
touch C 10 times. The registered code number
is canceled, letting you register a new one.
!
Notes
Setting for digitaloutput
!
!
We recommend to keep a record of your code
number in case you forget it.
Set digital output correctly to match the com-
ponents you are using with this unit. There is
no need to change settings if this unit is not
connected for digital output.
The parental lock level is recorded on the disc.
You can confirm it by looking at the disc pack-
age, included literature or on the disc itself.
With discs that do not feature a recorded par-
ental lock level, you cannot use parental lock.
With some discs, parental lock operates to
skip certain scenes only, after which normal
playback resumes. For details, refer to the
discꢀs instructions.
!
When using this unit with a Pioneer multi-
channel processor (DEQ-P8000), select
DOLBY/LPCM.
!
!
When using this unit with a head unit fea-
tures digital input (e.g., DEX-P9), select
LPCM.
Important
Changing the level
Incorrect setting may result in noise and damage
to speakers so be sure to read the manuals of the
connected components.
You can change the set parental lock level.
1
Touch SETUP and VISUAL and then
touch PARENTAL.
1
Touch SETUP and AUDIO and then
touch DIGTL OUT.
2
Touch 0ꢂ9 to input the registered code
number.
2
Touch either of the following touch
panel keys to select the digital output set-
ting.
3
Touch ENTER.
This enters the code number, and you can now
change the level.
#
icon is displayed. Touch C and input the cor-
rect code number.
!
DOLBY/LPCM ꢃ The Dolby Digital signal is
output as it is (initial setting)
If you input an incorrect code number, the
!
LPCM ꢃ The Dolby Digital signal is con-
verted to and output as a linear PCM signal
#
If you forget your code number, refer to If you
forget your code number on this page.
60
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Setting up the DVD player
11
Notes
Notes
!
!
Linear PCM output of DTS audio is not possi-
ble. If you select LPCM, DTS audio is not out-
put.
When using an amplifier and decoder that are
not Dolby Digital compatible, select LPCM.
!
!
!
With discs featuring 96 kHz recording, if you
select 96kHz, audio is not output from digital
output.
With discs that do not feature a CSS (Content
Scrambling System) copy guard signal, a 96
kHz digital signal is output.
When using this unit with a Pioneer multi-
channel processor (DEQ-P8000), select
48kHz. If you select 96kHz, no sound will be
output when playing discs featuring 96 kHz re-
cordings.
Setting digitaland analog
audio output
You can set linear PCM audio output for both
digital and analog output. Set audio output
correctly to match the components you are
using with this unit.
Automatic playback of DVDs
!
When using digital connections, select
48kHz.
When a DVDs disc with DVD menu is inserted,
this unit will cancel the DVD menu automati-
cally and start playback from the first chapter
of the first title.
!
When using analog connections, select
96kHz.
!
Some DVDs may not operate properly. If
this function is not fully operated, turn this
function off and start playback.
Important
If the setting is incorrect there will be no sound
so be sure to read the manuals of the connected
components.
1
Touch SETUP and NEXT and then touch
OTHERS.
1
Touch SETUP and AUDIO and then
2
Touch DVD A. PLAY.
touch AUDIO OUT.
3
#
#
Touch a to turn automatic playback on.
To turn automatic playback off, touch b.
When the automatic playback is on, you can-
2
Touch either of the following touch
panel keys to select the audio output set-
ting.
not operate repeating play of DVD disc (refer to
!
48kHz ꢃ A 48 kHz signal is output regard-
less of the audio sampling frequency. A 96
kHz signal is converted to a 48 kHz signal.
(initial setting)
!
96kHz ꢃ The signal is output with the same
frequency as the audio sampling frequency.
With a 96kHz signal, you can enjoy excep-
tionally high sound quality.
61
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
11
Setting up the DVD player
Setting remote control
code type
There are three remote control code types,
code type A, code type B and code type H/U.
Switch the remote code according to the com-
bined components.
!
H/U ꢃ Operating this unit with ADD-ON
mode (M)
!
A ꢃ Operating this unit with IP-BUS mode
(S) when combined with a DVD navigation
unit
!
B ꢃ Operating this unit with IP-BUS mode
(S) when combined with a multi-DVD
player
1
Set the remote control selection switch
on the left side of the remote control to
the appropriate position with a pen tip or
other pointed instrument .
!
If you select H/U mode, there is no need to
take the following procedure.
!
If you select A/B mode, take the following
procedure and change the code type to the
appropriate type.
2
Press 7 and 0 on the remote control si-
multaneously to change the code type.
Initially, the code type is set to A. Each time
you press 7 and 0 simultaneously on the re-
mote control the code type switches between
A and B.
Note
When the remote control operation switch is set
to DVD, changing the remote control code type
enables you to operate the Pioneer DVD player
with the supplied remote control.
When operating the following components only
which combined with this unit, be sure to select
codes as follows:
!
!
A ꢃ Operating a multi-DVD player
B ꢃ Operating a DVD navigation unit
62
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
InitialSettings
12
1
Touch A.MENU and INITIAL and then
Adjusting initialsettings
touch DT. WARNING.
2
Touch a to turn warning tone on.
#
To turn warning tone off, touch b.
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1
Initial settings lets you perform initial setup of
different settings for this unit.
!
Only when using this unit with ADD-ON
mode (M), you can operate this function.
1 Function display
Shows the function names.
1
Touch A.MENU and INITIAL and then
touch AUX.
1
Press AV SOURCE and hold until the
unit turns off.
2
#
Touch a to turn auxiliary setting on.
To turn auxiliary setting off, touch b.
2
Touch A.MENU and then touch INITIAL
to display the function names.
The function names are displayed and oper-
able ones are highlighted.
Switching the automatic
disc playback
You can turn automatic disc playback on or off
when you insert a disc into the disc loading
slot. When this function is on, the disc will be
automatically played after it is inserted into
the disc loading slot.
#
When A.MENU is not displayed, you can dis-
play it by touching the screen.
You can also display MENU by clicking the
joystick.
#
#
#
To return to the previous display, touch BACK.
To return to the display of each source, touch
ESC.
Initially, this function is set to on.
1
Touch A.MENU and INITIAL and then
touch DVD D. AUTO.
Switching the warning tone
If the front panel is not detached from this
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn
off the warning tone.
2
Touch a to turn automatic disc play-
back on.
#
b.
To turn automatic disc playback off, touch
!
Only when using this unit with ADD-ON
mode (M), you can operate this function.
63
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
12
InitialSettings
2
Touch a or b to select the remote con-
Switching the wired
remote controlsetting
trol code type.
Touch a to select CODE A. Touch b to select
When using this unit with a Pioneer head unit
featuring jack for the wired remote control,
you can operate the basic function of each
source by touch panel key.
CODE B.
!
Only when using this unit with IP-BUS
mode (S), you can operate this function.
1
Touch A.MENU and INITIAL and then
touch WIRED RMT.
2
Touch a to turn wired remote control
on.
#
To turn wired remote control off, touch b.
Selecting remote control
code type
When using this unit with a Pioneer DVD
player, changing the remote control code type
enables you to operate this unit only. Select
the appropriate remote code according to the
combined components.
!
!
!
Only when using this unit with IP-BUS
mode (S), you can operate this function.
Select CODE A when combined with a
DVD navigation unit.
Select CODE B when combined with a
multi-DVD player.
Important
When changing the remote control code type,
switch the remote control selection switch on the
left side of the remote control to the appropriate
position. (Refer to page 62.)
1
Touch A.MENU and INITIAL and then
touch REM CODE.
64
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Other Functions
13
1
Touch A.MENU and SETUP and then
Introduction of setup
adjustments
touch AV INPUT1.
2
Touch c or d to select the video input 1
setting.
Touch c or d until the desired setting appears
in the display.
!
!
!
OFF ꢃ No video component is connected
VIDEO ꢃ External video component
DVD ꢃ Pioneer DVD head unit (e.g., DVH-
P5000MP)
#
Only when using this unit with IP-BUS mode
1
(S), you can select DVD.
1 Setup menu display
Shows the setup function names.
Setting the video input 2
You can switch the setting according to the
connected component.
%
Touch A.MENU and then touch SETUP
to display the setup function names.
The setup function names are displayed and
operable ones are highlighted.
!
!
Select VIDEO to watch video of a con-
nected component as AV-2 source.
Select B. CAMERA when a rear view cam-
era is installed on your vehicle.
#
When A.MENU is not displayed, you can dis-
play it by touching the screen.
You can also display MENU by clicking the
joystick.
#
1
Touch A.MENU and SETUP and then
#
#
To return to the previous display, touch BACK.
To return to the display of each source, touch
touch AV INPUT2.
ESC.
2
Touch c or d to select the video input 2
setting.
Note
Touch c or d until the desired setting appears
in the display.
If you do not operate the setup function within
about 30 seconds, the display is automatically re-
turned to the source display.
!
!
!
OFF ꢃ No video component is connected
VIDEO ꢃ External video component
B. CAMERA ꢃ Rear view camera
Setting for rear view camera
Setting the video input 1
You can switch the setting according to the
connected component.
CAUTION
Pioneer recommends the use of a camera
which outputs mirror reversed images, other-
wise screen image may appear reversed.
!
!
Select VIDEO to watch video of a con-
nected component as AV-1 source.
Select DVD to watch video of a connected
Pioneer DVD head unit.
65
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
13
Other Functions
This unit features a function that automatically
switches to the rear view camera video
(VIDEO 2/BACK CAMERA INPUT jack) when
a rear view camera is installed on your vehicle.
When the gear shift is in REVERSE (R) posi-
tion, the video automatically switches to a rear
view camera video. (For more details, consult
your dealer.)
!
!
Only when a Pioneer navigation unit is con-
nected to this unit, you can switch the
video of rear display.
When selecting SOURCE in REAR DISP,
when the selected source is an audio
source, nothing is displayed on rear dis-
play.
!
Confirm the setting immediately whether
the display changes to a rear view camera
video when the gear shift is moved to RE-
VERSE (R) from another position.
When the display changes to a rear view
camera video during normal drivings,
switch to another setting.
1
Touch A.MENU and SETUP and then
touch REAR DISP.
2
Touch c or d to select the video on rear
!
!
1
display.
Touch c or d until the desired video setting
appears in the display.
To return to the source display, press
V.ADJ.
!
SOURCE ꢃ Display the video of the selected
source on rear display
NAVI ꢃ Display the navigation image on
rear display
!
Touch A.MENU and SETUP and then
touch AV INPUT2.
2
3
4
Touch c or d to select B. CAMERA.
Touch b to select POLARITY.
Setting the automatic open
function
To prevent the display from hitting the shift
lever of an automatic vehicle when it is in P
(park) position, or when you do not wish the
display to open/close automatically, you can
set the automatic open function in the manual
mode.
Touch c or d to select an appropriate
setting for polarity.
Each time you touch c or d it switches be-
tween the following polarity:
!
BATTERY ꢃ When the polarity of the con-
nected lead is positive while the gear shift
is in REVERSE (R) position
GND ꢃ When the polarity of the connected
lead is negative while the gear shift is in RE-
VERSE (R) position
Furthermore, to adjust the LCD panel slide po-
sition, you can turn the set back on or off.
!
1
Touch A.MENU and SETUP and then
touch FLAP SET.
2
Touch a and the LCD panel slides to the
back.
#
Selecting the video of rear
display
Touch b and the LCD panel slides to the front.
Touch c or d to select the display to
open/close automatically or manually.
Touch c to select MANUAL, and you have to
press OPEN/CLOSE to open/close the display.
When the navigation image is displayed on
front display, you can select either showing
the navigation image on rear display or a video
of a selected source.
3
66
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Other Functions
13
ꢄ If the minute is 30ꢄ59, the minutes are
rounded up. (e.g., 10:36 becomes 11:00.)
Even when the sources are off, the clock dis-
play appears on the display.
Touch d to select AUTO, and the display auto-
matically opens/closes when power to this
unit is turned on.
!
Setting the clock
Use these instructions to set the clock.
Using the AUX source
An IP-BUS-RCA Interconnector such as the
CD-RB20/CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment fea-
turing RCA output. For more details, refer to
the IP-BUS-RCA Interconnector ownerꢀs man-
ual.
1
Touch A.MENU and SETUP and then
touch CLOCK ADJ.
2
Touch OFF to turn the clock display on.
ON will appear in the display instead of OFF.
!
Only when using this unit with ADD-ON
mode (M), you can use the AUX source.
Clock display is now on.
#
To turn the clock display off, touch ON.
3
Touch c or d to select the segment of
the clock display you wish to set.
Each time you touch c or d it will select one
segment of the clock display:
HourꢄMinute
As you select segments of the clock display
the segment selected will be highlighted.
Selecting AUX as the source
%
Touch the source icon and then touch
AUX to select AUX as the source.
When the source icon is not displayed, you
can display it by touching the screen.
If the auxiliary setting is not turned on, AUX
#
#
cannot be selected. For more details, see Switch-
Setting the AUX title
The title displayed for the AUX source can be
changed.
4
Touch a or b to set the clock.
1
After you have selected AUX as the
Each time you touch a it increases the se-
lected hour or minute. Each time you touch b
it decreases the selected hour or minute.
source, touch A.MENU and FUNCTION and
then touch NAME EDIT.
2
Touch ABC to select the desired charac-
ter type.
Notes
Touch ABC repeatedly to switch between the
following character types:
Alphabet (upper case), numbers and symbols
ꢄAlphabet (lower case)ꢄEuropean letters,
such as those with accents (e.g., á, à, ä, ç)
!
You can match the clock to a time signal by
touching JUST.
ꢄ If the minute is 00ꢄ29, the minutes are
rounded down. (e.g., 10:18 becomes
10:00.)
67
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
13
Other Functions
#
You can select to input numbers and symbols
ꢄ When the DVD/Video CD playback is not
turned on for rear display (refer to page
by touching 123.
3
Touch a or b to select a letter of the al-
ꢄ When a Pioneer navigation unit is not
connected to this unit.
phabet.
Each time you touch a it will display a letter of
the alphabet in AB C ... X Y Z , numbers and
symbols in 1 2 3 ... | } ¯ order. Each time you
touch b it will display a letter in the reverse
order, such as Z Y X ... C B A.
!
Dolphin movie will not appear when the
touch panel keys or the list is displayed.
IP-BUS mode (S)
%
Press ENTERTAINMENT.
Each time you press ENTERTAINMENT the
display changes in the following order:
Video of currently selected sourceꢄDOLPHIN
(background visual)ꢄAV-1 (video input 1)
ꢄAV-2 (video input 2)ꢄDVD (DVD player)
ꢄNAVI (navigation unit wallpaper)
#
When this player which is turned off is se-
lected as a source, you cannot use
ENTERTAINMENT.
4
Touch d to move the cursor to the next
character position.
When the desired letter is displayed, touch d
to move the cursor to the next position and
then select the next letter. Touch c to move
backwards in the display.
Note
When the selected source is an audio source,
when you select the video of currently selected
source, nothing is displayed on the display.
5
Touch OK to store the entered title in
memory.
ADD-ON mode (M)
6
play.
Touch ESC to return to the playback dis-
%
Press ENTERTAINMENT.
Each time you press ENTERTAINMENT the
display changes in the following order:
Audio source
Switching the background
display
You can switch background displays while lis-
tening to each source.
Background still pictureꢄBGV (background
visual)ꢄAV-1 (video input 1)ꢄAV-2 (video
input 2)ꢄDVD (DVD player)ꢄNAVI (naviga-
tion unit wallpaper)
Video source
!
In the following cases, the background dis-
play will not change:
Video of currently selected sourceꢄback-
ground still pictureꢄBGV (background visual)
ꢄAV-1 (video input 1)ꢄAV-2 (video input 2)
ꢄDVD (DVD player)ꢄNAVI (navigation unit
wallpaper)
ꢄ When AV INPUT1 (video input 1) and/or
AV INPUT2 (video input 2) are not set to
68
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Other Functions
13
Using the PGM button
You can operate the preprogrammed functions
for each source by using
BOOKMARK (BOOK.M).
When combined with a
Pioneer head unit
Operating each source by touch
panelkey
!
Only when using this unit with ADD-ON
mode (M), you can operate this function.
1
2
3
%
Press BOOKMARK (BOOK.M) to turn
pause on when selecting the following
sources:
!
!
Built-in DVD player
Multi-CD Player
#
To turn pause off, press
BOOKMARK (BOOK.M) again.
%
Press BOOKMARK (BOOK.M) and hold
5
4
to turn BSSM on when selecting television
as the source.
When using this unit with a Pioneer head unit
featuring jack for the wired remote control,
you can operate the basic function of each
source by touch panel key.
Press BOOKMARK (BOOK.M) and hold until
the BSSM turns on.
#
To cancel the storage process, press
BOOKMARK (BOOK.M) again.
!
You can use the touch panel keys only
when turned wired remote control on.
(Refer to Switching the wired remote control
1 BAND key
Touch to select among three FM bands and
one AM band and to cancel the control
mode of functions.
2 a/b/c/d keys
Touch to do manual seek tuning, fast for-
ward, reverse and track search controls.
Also used for controlling functions.
3 A.MENU key
Touch to display MENU only for this unit.
4 ESC key
Touch to hide the touch panel keys.
69
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
13
Other Functions
5 SRC key
This unit is turned on by selecting a source.
Touch to cycle through all the available
sources.
Introduction of DVD operation
You can use this unit with a separately sold
DVD player or multi-DVD player.
For details concerning operation, refer to the
DVD playerꢀs or multi-DVD playerꢀs operation
manual. This section provides information on
DVD operations with this unit which differs
from that described in the DVD playerꢀs or
multi-DVD playerꢀs operation manual.
!
Only the remote control can operate the fol-
lowing functions. To perform the following
functions, switch the remote control opera-
tion mode to DVD. (Refer to page 17.)
Turning the DVD player on or off
%
Press REAR.S to turn the DVD player
on.
#
To turn the DVD player off, press REAR.S
again.
Selecting a disc
!
You can operate this function only when a
multi-DVD player is connected to this unit.
%
Press BACK or ENTERTAINMENT to se-
lect a disc.
70
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
AdditionalInformation
Troubleshooting
Common
Symptom
Cause
Action (See)
Power doesnꢀt turn on.
The unit doesnꢀt operate.
Leads and connectors are incor-
rectly connected.
Confirm once more that all connections are
correct.
The fuse is blown.
Rectify the reason for the fuse blowing, then
replace the fuse. Be very sure to install the
correct fuse with the same rating.
the built-in microprocessor to oper-
ate incorrectly.
Operation with the remote con- The remote control operation mode Switch to the correct remote control mode.
trol isnꢀt possible.
is incorrect.
(Page 17)
The unit does not operate cor-
rectly even when the appropriate
remote control buttons are
pressed.
The remote control code is incor-
rect.
Make sure the remote control selection
switch setting and code type setting are the
Battery power is low.
Load new battery. (Page 13)
Check by using another disc.
Some operations are prohibited
with certain discs.
Playback is not possible.
The disc is dirty.
Clean disc. (Page 74)
The loaded disc is a type this unit
cannot play.
Check what type the disc is.
Non compatible video system disc
is loaded.
Change to a disc compatible to your video
system.
No sounds are heard.
Cables are not connected correctly. Connect the cables correctly.
The volume level will not rise.
With some discs, 96 kHz output is
prohibited.
Switch the output setting to 48 kHz. (Page 61)
The unit is performing still, slow mo- There is no sound during still, slow motion or
tion or frame-by-frame playback.
frame-by-frame playback.
There is no picture.
The parking brake cord is not con-
nected.
Connect a parking brake cord, and apply the
parking brake.
The parking brake is not applied.
Connect a parking brake cord, and apply the
parking brake.
The icon
is displayed, and op- The operation is prohibited for the
This operation is not possible.
eration is not possible.
disc.
The operation is not compatible
This operation is not possible.
with the discꢀs organization.
The picture stops (pauses) and Reading of data has become impos- After pressing g once, start playback once
the unit cannot be operated.
sible during playback.
The volume level is low.
The attenuator is on.
more.
There is no sound.
Volume level is low.
Adjust the volume level.
Turn the attenuator off.
Secure the unit firmly.
There is audio and video skip-
ping.
The unit is not firmly secured.
71
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
AdditionalInformation
Symptom
Cause
Action (See)
The picture is stretched, the as- The aspect setting is incorrect for
Select the appropriate setting for your display.
pect is incorrect.
the display.
When the ignition switch is
turned ON (or turned to ACC),
the motor sounds.
The unit is confirming whether a
disc is loaded or not.
This is a normal operation.
Nothing is displayed.
The rear view camera is not con-
Connect a rear view camera.
The touch panel keys cannot be nected.
Press V.ADJ to return to the source display
used.
B. CAMERA is at incorrect setting. and then select the correct setting for B.
CAMERA. (Page 65)
Problems duringDVD playback
Symptom
Cause
Action (See)
Playback is not possible.
The loaded disc has a different re-
gion number from this unit.
Replace the disc with one featuring the same
region number as this unit. (Page 8, Page 81)
A parental lock message is dis- Parental lock is on.
played and playback is not pos-
sible.
Turn parental lock off or change the level.
Parental lock cannot be can-
celed.
The code number is incorrect.
Input the correct code number. (Page 59)
You have forgotten your code num- Press CLEAR 10 times to cancel the code
ber.
number. (Page 60)
Dialog language (and subtitle
language) cannot be switched. multiple language recordings.
The DVD playing does not feature
You cannot switch among multiple languages
if they are not recorded on the disc.
You can only switch between items Switch using the disc menu.
indicated in the disc menu.
No subtitles are displayed.
The DVD playing does not feature
subtitles.
Subtitles are not displayed if they are not re-
corded on the disc.
You can only switch between items Switch using the disc menu.
indicated in the disc menu.
Playback is not with the audio
The DVD playing does not feature
Switching to a selected language is not possi-
language and subtitle language dialog or subtitles in the language
ble if the language selected in DVD SETUP is
settings selected in DVD SETUP. selected in DVD SETUP.
not recorded on the disc.
Switching the viewing angle is
not possible.
The DVD playing does not feature
scenes shot from multiple angles.
You cannot switch between multiple angles if
the DVD does not feature scenes recorded
from multiple angles.
You are trying to switch to multiple Switch between multiple angles when watch-
angle viewing of a scene that is not ing scenes recorded from multiple angles.
recorded from multiple angles.
The picture is extremely unclear/ The disc features a signal to prohibit Since this unit is compatible with the copy
distorted and dark during play- copying. (Some discs may have
guard analog copy protect system, when play-
ing a disc that has a signal prohibiting copy-
ing, the picture may suffer from horizontal
stripes or other imperfections when viewed
on some displays. This does not mean this
unit is malfunctioning.
back.
this.)
72
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
AdditionalInformation
Problems duringVideo CD playback
Symptom
Cause
Action (See)
The PBC (playback control)
The Video CD playing does not fea- This operation is not possible with Video CDs
menu display cannot be called ture PBC.
up.
not featuring PBC.
Repeat play and track/time
search are not possible.
The Video CD playing features PBC. This operation is not possible with Video CDs
featuring PBC.
Problems duringmulti-channel processor connection
Symptom
Cause
Action (See)
No sounds are heard.
The volume level will not rise.
Optical cables are not connected
correctly.
Connect the cables correctly.
patible with a 96 kHz signal.
Error messages
When problems occur with disc playback, an error message appears on the display. Refer to the
table below to identify the problem, then take the suggested corrective action. If the error persists,
contact your dealer or your nearest PIONEER Service Center.
Message
Cause
Action (See)
ERROR-02
Dirty disc
Clean disc.
Scratched disc
Replace disc.
The disc is loaded upside down
Electrical or mechanical
Check that the disc is loaded correctly.
Press RESET.
ERROR-05
DIFFERENT REGION DISC
The disc does not have the same re- Replace the DVD video with one bearing the
gion number as this unit
correct region number.
NON PLAYABLE DISC
This type of disc cannot be played
by this unit
Replace the disc with one this unit can play.
THERMAL PROTECTION IN
MOTION
The temperature of this unit is out- Wait until the unitꢀs temperature returns to
side the normal operating range within normal operating limits.
PROTECT
All the files on the inserted disc are Replace disc.
secured by digital rights manage-
ment (DRM)
TRK SKIPPED
The inserted disc contains WMA
files that are protected by digital
rights management (DRM)
Replace disc.
73
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
AdditionalInformation
DVD player and care
DVD discs
!
Use only normal, round discs. If you insert
irregular, non-round, shaped discs they
may jam in the DVD player or not play prop-
erly.
!
!
!
With some DVD video discs, it may not be
possible to use certain functions.
It may not be possible to play back some
DVD video discs.
When DVD-R/DVD-RW discs are used,
playback is possible only for discs which
have been finalized.
!
!
When DVD-R/DVD-RW discs are used,
playback is possible only for discs which
have been recorded with the Video format
(video mode). It is not possible to play back
DVD-RW discs which have been recorded
with the Video Recording format (VR
mode).
It may not be possible to play back DVD-R/
DVD-RW discs which have been recorded
with the Video format (video mode), be-
cause of disc characteristics, scratches or
dirt on the disc, or dirt, condensation, etc.
on the lens of this unit.
!
!
Check all discs for cracks, scratches or
warping before playing. Discs that have
cracks, scratches or are warped may not
play properly. Do not use such discs.
Avoid touching the recorded (non-printed)
surface when handling the disc.
Store discs in their cases when not in use.
Keep discs out of direct sunlight and do
not expose the discs to high temperatures.
Do not attach labels, write on or apply che-
micals to the surface of the discs.
!
!
!
!
!
!
It is not possible to play back DVD-ROM/
DVD-RAM discs.
To clean a disc, wipe the disc with a soft
cloth outward from the center.
Playback of discs recorded on a personal
computer may not be possible, depending
on the application settings and the environ-
ment. Please record with the correct for-
mat. (For details, contact the manufacturer
of the application.)
!
!
If the heater is used in cold weather, con-
densation may form on components inside
the DVD player. Condensation may cause
the DVD player to not operate properly. If
you think that condensation is a problem
turn off the DVD player for an hour or so to
allow it to dry out and wipe any damp discs
with a soft cloth to remove the moisture.
Road shocks may interrupt disc
CD-R/CD-RW discs
!
When CD-R/CD-RW discs are used, play-
back is possible only for discs which have
been finalized.
!
It may not be possible to play back CD-R/
CD-RW discs recorded on a music CD re-
corder or a personal computer because of
disc characteristics, scratches or dirt on
the disc, or dirt, condensation, etc., on the
lens of this unit.
playback.
!
Playback of discs recorded on a personal
computer may not be possible, depending
74
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
AdditionalInformation
on the application settings and the environ-
ment. Please record with the correct for-
mat. (For details, contact the manufacturer
of the application.)
Playback of CD-R/CD-RW discs may be-
come impossible in case of direct exposure
to sunlight, high temperatures, or the sto-
rage conditions in the vehicle.
Titles and other text information recorded
on a CD-R/CD-RW disc may not be dis-
played by this unit (in the case of audio
data (CD-DA)).
This unit conforms to the track skip func-
tion of the CD-R/CD-RW disc. The tracks
containing the track skip information are
skipped automatically (in case of audio
data (CD-DA)).
and level 2 of ISO9660 and with the Romeo
and Joliet file system can be played back.
It is possible to play back multi-session
compatible recorded discs.
MP3/WMA files are not compatible with
packet write data transfer.
The maximum number of characters which
can be displayed for a file name, including
the extension (.mp3 or .wma), is 64, from
the first character.
The maximum number of characters which
can be displayed for a folder name is 64.
In case of files recorded according to the
Romeo file system, only the first 64 charac-
ters can be displayed.
When playing discs with MP3/WMA files
and audio data (CD-DA) such as CD-EXTRA
and MIXED-MODE CDs, both types can be
played only by switching mode between
MP3/WMA and CD-DA.
The folder selection sequence for playback
and other operations becomes the writing
sequence used by the writing software. For
this reason, the expected sequence at the
time of playback may not coincide with the
actual playback sequence. However, there
also is some writing software which per-
mits setting of the playback order.
Some audio CDs contain tracks that merge
into one another without a pause. When
these discs are converted to MP3/WMA
files and burned to a CD-R/CD-RW/CD-
ROM, the files will be played back on this
player with a short pause between each
one, regardless of the length of the pause
between tracks on the original audio CD.
!
!
!
!
!
!
!
!
!
!
!
If you insert a CD-RW disc into this unit,
time to playback will be longer than when
you insert a conventional CD or CD-R disc.
Read the precautions with CD-R/CD-RW
discs before using them.
!
MP3 and WMA files
!
MP3 is short for MPEGAudio Layer 3 and
refers to an audio compression technology
standard.
WMA is short for Windows Media" Audio
and refers to an audio compression tech-
nology that is developed by Microsoft Cor-
poration. WMA data can be encoded by
using Windows Media Player version 7 or
later.
With some applications used to encode
WMA files, this unit may not operate cor-
rectly.
With some applications used to encode
WMA files, album names and other text in-
formation may not be correctly displayed.
This unit allows playback of MP3/WMA
files on CD-ROM, CD-R and CD-RW discs.
Disc recordings compatible with level 1
!
!
!
!
!
Important
!
When naming an MP3 or a WMA file, add the
corresponding filename extension (.mp3 or
.wma).
75
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
AdditionalInformation
!
This unit plays back files with the filename ex-
tension (.mp3 or .wma) as an MP3 or a WMA
file. To prevent noise and malfunctions, do not
use these extensions for files other than MP3
or WMA files.
!
This unit does not play back WMA files re-
corded as VBR (variable bit rate).
About folders and MP3/
WMA files
MP3 additionalinformation
!
!
An outline of a CD-ROM with MP3/WMA
files on it is shown below. Subfolders are
shown as folders in the folder currently se-
lected.
Files are compatible with the ID3 Tag Ver.
1.0, 1.1, 2.2, 2.3 and 2.4 formats for display
of album (disc title), track (track title), artist
(track artist) and comments. Ver. 2.x of ID3
Tag is given priority when both Ver. 1.x and
Ver. 2.x exist.
!
The emphasis function is valid only when
MP3 files of 32, 44.1 and 48 kHz frequen-
cies are played back. (16, 22.05, 24, 32,
44.1, 48 kHz sampling frequencies can be
played back.)
!
!
There is no m3u playlist compatibility.
There is no compatibility with the MP3i
(MP3 interactive) or mp3 PRO formats.
The sound quality of MP3 files generally be-
comes better with an increased bit rate.
This unit can play recordings with bit rates
from 8 kbps to 320 kbps, but in order to be
able to enjoy sound of a certain quality, we
recommend using only discs recorded with
a bit rate of at least 128 kbps.
!
WMA additionalinformation
!
!
!
This unit plays back WMA files encoded by
Windows Media Player version 7 and 8.
You can only play back WMA files in the fre-
quencies 32, 44.1 and 48 kHz.
The sound quality of WMA files generally
becomes better with an increased bit rate.
This unit can play recordings with bit rates
from 48 kbps to 192 kbps, but in order to be
able to enjoy sound of a certain quality, we
recommend using discs recorded with a
higher bit rate.
1
2
3
1 First level
2 Second level
3 Third level
76
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
AdditionalInformation
damage to the LCD screen. When not
using this unit, close the display and avoid
exposing it to direct sunlight.
The display should be used within the tem-
perature ranges shown below.
Operating temperature range: +14 to +122
°F
Storage temperature range: ꢃ4 to +176 °F
At temperatures higher or lower than the
operating temperature range the display
may not operate normally.
The LCD screen of this unit is exposed in
order to increase its visibility within the ve-
hicle. Please do not press strongly on it as
this may damage it.
Do not place anything on the display when
it is opened. Also, do not attempt to carry
out angle adjustment, or open/close the
display by hand. Applying strong force to
the display may damage it.
Notes
!
!
This unit assigns folder numbers. The user
can not assign folder numbers.
!
It is not possible to check folders that do not
include MP3/WMA files. (These folders will be
skipped without displaying the folder number.)
MP3/WMA files in up to 8 tiers of folders can
be played back. However, there is a delay in
the start of playback on discs with numerous
tiers. For this reason we recommend creating
discs with no more than 2 tiers.
!
!
!
!
It is possible to play back up to 253 items from
folders on one disc.
Using the display correctly
CAUTION
!
If liquid or foreign matter should get inside
this unit, turn off the power immediately and
consult your dealer or the nearest authorized
PIONEER Service Station. Do not use the unit
in this condition because doing so may result
in a fire, electric shock, or other failure.
If you notice smoke, a strange noise or smell,
or any other abnormal signs from the display,
turn off the power immediately and consult
your dealer or the nearest authorized PIO-
NEER Service Station. Using this unit in this
condition may result in permanent damage to
the system.
!
!
Do not push the LCD screen with much
force as this may scratch it.
Be careful not to place anything between
the display and the main body when the
display is opening or closing. If an object
gets between the display and main body,
the display may stop working.
Be careful of fingers, long hair, and loose
articles of clothing which could possibly
get caught between the display and the
main body and cause serious injury.
!
!
!
Do not disassemble or modify this unit, as
there are high-voltage components inside
which may cause an electric shock. Be sure
to consult your dealer or the nearest author-
ized PIONEER Service Station for internal in-
spection, adjustments or repairs.
Liquid crystaldisplay (LCD) screen
!
If the display is near the vent of an air con-
ditioner when it is opened, make sure that
air from the air conditioner is not blowing
on it. Heat from the heater may damage
the LCD screen, and cool air from the cool-
er may cause moisture to form inside the
display resulting in possible damage. Also,
if the display is cooled down by the cooler,
the screen may become dark, or the life
span of the small fluorescent tube used in-
side the display may be shortened.
Handling the display
!
When the display is subjected to direct sun-
light for a long period of time, it will be-
come very hot resulting in possible
77
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
AdditionalInformation
!
!
Small black dots or white dots (bright dots)
may appear on the LCD screen. These are
due to the characteristics of the LCD
screen and do not indicate a problem with
the display.
At low temperatures, the LCD screen may
be dark for a while after the power is turned
on.
!
!
The LCD screen will be difficult to see if it is
exposed to direct sunlight.
When using a portable phone, keep the an-
tenna of the portable phone away from the
display to prevent disruption of the video by
the appearance of spots, colored stripes,
etc.
Keeping the display in good
condition
!
When removing dust from the screen or
cleaning the display, first turn the system
power off, then wipe with the supplied
cloth.
!
When wiping the screen, take care not to
scratch the surface. Do not use harsh or
abrasive chemical cleaners.
Small fluorescent tube
!
A small fluorescent tube is used inside the
display to illuminate the LCD screen.
ꢄ The fluorescent tube should last for ap-
proximately 10,000 hours, depending on
operating conditions. (Using the display
at low temperatures reduces the service
life of the fluorescent tube.)
ꢄ When the fluorescent tube reaches the
end of its useful life, the screen will be
dark and the image will no longer be
projected. If this happens, consult your
dealer or the nearest authorized PIO-
NEER Service Station.
78
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
AdditionalInformation
Language code chart for DVD
Language (code), input code
Japanese (ja), 1001
English (en), 0514
French (fr), 0618
Spanish (es), 0519
German (de), 0405
Italian (it), 0920
Language (code), input code
Language (code), input code
Pashto, Pushto (ps), 1619
Quechua (qu), 1721
Rhaeto-Romance (rm), 1813
Kirundi (rn), 1814
Romanian (ro), 1815
Kinyarwanda (rw), 1823
Sanskrit (sa), 1901
Sindhi (sd), 1904
Sangho (sg), 1907
Serbo-Croatian (sh), 1908
Sinhalese (si), 1909
Slovak (sk), 1911
Slovenian (sl), 1912
Samoan (sm), 1913
Shona (sn), 1914
Somali (so), 1915
Albanian (sq), 1917
Serbian (sr), 1918
Siswati (ss), 1919
Sesotho (st), 1920
Sundanese (su), 1921
Swahili (sw), 1923
Tamil (ta), 2001
Guarani (gn), 0714
Gujarati (gu), 0721
Hausa (ha), 0801
Hindi (hi), 0809
Croatian (hr), 0818
Hungarian (hu), 0821
Armenian (hy), 0825
Interlingua (ia), 0901
Interlingue (ie), 0905
Inupiak (ik), 0911
Indonesian (in), 0914
Icelandic (is), 0919
Hebrew (iw), 0923
Yiddish (ji), 1009
Javanese (jw), 1023
Georgian (ka), 1101
Kazakh (kk), 1111
Greenlandic (kl), 1112
Cambodian (km), 1113
Kannada (kn), 1114
Kashmiri (ks), 1119
Kurdish (ku), 1121
Kirghiz (ky), 1125
Latin (la), 1201
Lingala (ln), 1214
Laothian (lo), 1215
Lithuanian (lt), 1220
Latvian (lv), 1222
Malagasy (mg), 1307
Maori (mi), 1309
Macedonian (mk), 1311
Malayalam (ml), 1312
Mongolian (mn), 1314
Moldavian (mo), 1315
Marathi (mr), 1318
Malay (ms), 1319
Maltese (mt), 1320
Burmese (my), 1325
Nauru (na), 1401
Chinese (zh), 2608
Dutch (nl), 1412
Portuguese (pt), 1620
Swedish (sv), 1922
Russian (ru), 1821
Korean (ko), 1115
Greek (el), 0512
Afar (aa), 0101
Abkhazian (ab), 0102
Afrikaans (af), 0106
Amharic (am), 0113
Arabic (ar), 0118
Assamese (as), 0119
Aymara (ay), 0125
Azerbaijani (az), 0126
Bashkir (ba), 0201
Byelorussian (be), 0205
Bulgarian (bg), 0207
Bihari (bh), 0208
Bislama (bi), 0209
Bengali (bn), 0214
Tibetan (bo), 0215
Breton (br), 0218
Catalan (ca), 0301
Corsican (co), 0315
Czech (cs), 0319
Telugu (te), 2005
Tajik (tg), 2007
Thai (th), 2008
Tigrinya (ti), 2009
Turkmen (tk), 2011
Tagalog (tl), 2012
Setswana (tn), 2014
Tonga (to), 2015
Turkish (tr), 2018
Tsonga (ts), 2019
Tatar (tt), 2020
Welsh (cy), 0325
Danish (da), 0401
Bhutani (dz), 0426
Esperanto (eo), 0515
Estonian (et), 0520
Basque (eu), 0521
Persian (fa), 0601
Finnish (fi), 0609
Fiji (fj), 0610
Faroese (fo), 0615
Frisian (fy), 0625
Twi (tw), 2023
Ukrainian (uk), 2111
Urdu (ur), 2118
Uzbek (uz), 2126
Vietnamese (vi), 2209
Volapük (vo), 2215
Wolof (wo), 2315
Xhosa (xh), 2408
Yoruba (yo), 2515
Zulu (zu), 2621
Nepali (ne), 1405
Norwegian (no), 1415
Occitan (oc), 1503
Oromo (om), 1513
Oriya (or), 1518
Irish (ga), 0701
Scots-Gaelic (gd), 0704
Galician (gl), 0712
Panjabi (pa), 1601
Polish (pl), 1612
79
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
AdditionalInformation
the year of production, comments and other
data. The contents can be freely edited using
software with ID3 Tag editing functions.
Although the tags are restricted as to the num-
ber of characters, the information can be
viewed when the track is played back.
Terms
Aspect ratio
This is the width-to-height ratio of a TV screen.
A regular display has an aspect ratio of 4:3.
Wide screen displays have an aspect ratio of
16:9, providing a bigger picture for exceptional
presence and atmosphere.
ISO9660 format
This is the international standard for the for-
mat logic of CD-ROM folders and files. For the
ISO9660 format, there are regulations for the
following two levels.
Bit rate
This expresses data volume per second, or bps
units (bits per second). The higher the rate,
the more information is available to reproduce
the sound. Using the same encoding method
(such as MP3), the higher the rate, the better
the sound.
Level 1:
The file name is in 8.3 format (the name con-
sists of up to 8 characters, half-byte English
capital letters and half-byte numerals and the
ꢁ_ꢂ sign, with a file-extension of three charac-
ters.)
Chapter
DVD titles are in turn divided into chapters
which are numbered in the same way as the
chapters of a book. With DVD video discs fea-
turing chapters, you can quickly find a desired
scene with chapter search.
Level 2:
The file name can have up to 31 characters (in-
cluding the separation mark ꢁ.ꢂ and a file ex-
tension). Each folder contains less than 8
hierarchies.
Extended formats
Joliet:
File names can have up to 64 characters.
Romeo:
File names can have up to 128 characters.
Dolby Digital
Dolby Digital provides multi-channel audio
from up to 5.1 independent channels. This is
the same as the Dolby Digital surround sound
system used in theaters.
Linear PCM (LPCM)/Pulse code
modulation
This stands for linear pulse code modulation,
which is the signal recording system used for
music CDs and DVDs. Generally, DVDs are re-
corded with higher sampling frequency and
bit rate than CDs. Therefore, DVDs can provide
higher sound quality.
DTS
This stands for Digital Theater Systems. DTS is
a surround system delivering multi-channel
audio from up to 6 independent channels.
m3u
Playlists created using the ꢁWINAMPꢂ soft-
ware have a playlist file extension (.m3u).
ID3 tag
This is a method of embedding track-related
information in an MP3 file. This embedded in-
formation can include the track title, the ar-
tistꢀs name, the album title, the music genre,
MP3
MP3 is short for MPEGAudio Layer 3. It is an
audio compression standard set by a working
80
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
AdditionalInformation
group (MPEG) of the ISO (International Stan-
dards Organization). MP3 is able to compress
audio data to about 1/10th the level of a con-
ventional disc.
input is designed to transmit and receive digi-
tal signals optically.
Packet write
This is a general term for a method of writing
on CD-R, etc., at the time required for a file,
just as is done with files on floppy or hard
discs.
MPEG
This stands for Moving Pictures Experts
Group, and is an international video image
compression standard. Some DVDs feature di-
gital audio compressed and recorded using
this system.
Parentallock
Some DVD video discs with violent or adult-or-
iented scenes feature parental lock which pre-
vents children from viewing such scenes. With
this kind of disc, if you set the unitꢀs parental
lock level, playback of scenes inappropriate for
children will be disabled, or these scenes will
be skipped.
Multi-angle
With regular TV programs, although multiple
cameras are used to simultaneously shoot
scenes, only images from one camera at a
time are transmitted to your TV. Some DVDs
feature scenes shot from multiple angles, let-
ting you choose your viewing angle as desired.
Playback control (PBC)
This is a playback control signal recorded on
Video CDs (Version 2.0). Using menu displays
provided by Video CDs with PBC lets you enjoy
playback of simple interactive software and
software with search functions. You can also
enjoy viewing high- and standard-resolution
still images.
Multi-audio (Multilingual dialog)
Some DVDs feature dialog recorded in multi-
ple languages. Dialog in up to 8 languages
can be recorded on a single disc, letting you
choose as desired.
Multi-session
Multi-session is a recording method that al-
lows additional data to be recorded later.
When recording data on a CD-ROM, CD-R or
CD-RW, etc., all data from beginning to end is
treated as a single unit or session. Multi-ses-
sion is a method of recording more than 2 ses-
sions on one disc.
Region number
DVD players and DVD discs feature region
numbers indicating the area in which they
were purchased. Playback of a DVD is not pos-
sible unless it features the same region num-
ber as the DVD player. This unitꢀs region
number is displayed on the bottom of the unit.
Multi-subtitle
Title
Subtitles in up to 32 languages can be re-
corded on a single DVD, letting you choose as
desired.
DVD video discs have high data capacity, en-
abling recording of multiple movies on a sin-
gle disc. If, for example, one disc contains
three separate movies, they are divided into
title 1, title 2 and title 3. This lets you enjoy the
convenience of title search and other func-
tions.
Opticaldigitaloutput/input
By transmitting and receiving audio signals in
a digital signal format, the chance of sonic
quality deteriorating in the course of transmis-
sion is minimized. An optical digital output/
81
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
AdditionalInformation
VBR
VBR is short for variable bit rate. Generally
speaking CBR (constant bit rate) is more
widely used. But by flexibly adjusting the bit
rate according to the needs of audio compres-
sion, it is possible to achieve compression-
priority sound quality.
WMA
WMA is short for Windows Media" Audio
and refers to an audio compression technol-
ogy that is developed by Microsoft Corpora-
tion. WMA data can be encoded by using
Windows Media Player version 7 or later.
Microsoft, Windows Media, and the Windows
logo are trademarks, or registered trademarks
of Microsoft Corporation in the United States
and/or other countries.
82
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
AdditionalInformation
Specifications
Signal-to-noise ratio ............... 97 dB (1 kHz) (IHF-A net-
work)
(CD: 96 dB (1 kHz) (IHF-A
network))
Dynamic range ......................... 95 dB (1 kHz)
(CD: 94 dB (1 kHz))
Distortion ..................................... 0.008 % (1 kHz)
Output level:
Video .................................... 1.0 Vp-p/75 W (±0.2 V)
Audio ................................... 1.0 V (1 kHz, 0 dB)
Number of channels .............. 2 (stereo)
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3
WMA decoding format ......... Ver. 7 & 8
General
Power source ............................. 14.4 V DC (10.8 ꢃ 15.1 V al-
lowable)
Grounding system ................... Negative type
Max. current consumption
..................................................... 5.0 A
Dimensions (W × H × D):
DIN
Chassis ............................... 178 × 50 × 160 mm
(7 × 2 × 6-1/4 in.)
Nose ..................................... 188 × 58 × 30 mm
(7-3/8 × 2-1/4 × 1-1/8 in.)
D
Note
Chassis ............................... 178 × 50 × 165 mm
(7 × 2 × 6-1/2 in.)
Specifications and the design are subject to pos-
sible modifications without notice due to im-
provements.
Nose ..................................... 170 × 46 × 25 mm
(6-3/4 × 1-3/4 × 1 in.)
Weight .......................................... 2.2 kg (4.8 lbs)
Display
Screen size/aspect ratio ....... 6.5 inch wide/16:9
(effective display area: 144
× 77 mm)
Pixels ............................................. 336,960 (1,440 × 234)
Type ................................................ TFT active matrix, transmis-
sive type
Color system .............................. NTSC
Operating temperature range
..................................................... +14 ꢃ +122 °F
Storage temperature range
..................................................... ꢃ4 ꢃ +176 °F
Angle adjustment .................... 50 ꢃ 110°
(initial settings: 110°)
DVD Player
System .......................................... DVD video, Video CD, Com-
pact disc audio system
Usable discs .............................. DVD video, Video CD, Com-
pact disc
Region number ........................ 1
Signal format:
Sampling frequency ..... 44.1/48/96 kHz
Number of quantization bits
........................................... 16/20/24; linear
Frequency response ............... 5 ꢃ 44,000 Hz (with DVD, at
sampling frequency 96 kHz)
83
En
Download from Www.Somanuals.com. All Manuals Search And Download.
PIONEER CORPORATION
4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936
TEL: 65-6472-1111
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada
TEL: 1-877-283-5901
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
Blvd.Manuel Avila Camacho 138 10 piso
Col.Lomas de Chapultepec, Mexico, D.F. 11000
TEL: 55-9178-4270
HÒ¡ýÉPlø
=lø : ðꢀÂ-qꢀ44_13ꢀ
ûq : (02) 2521-3588
HÒûPÈ™/ÉÉPlø
™/]ꢀ™€w/ÎꢀLFm-Ã
9ꢀ901-6¤
Published by Pioneer Corporation.
Copyright © 2004 by Pioneer Corporation.
All rights reserved.
ûq : (0852) 2848-6488
Printed in Japan
<KMMZF> <04C00000>
<CRB1967-A> UC
Download from Www.Somanuals.com. All Manuals Search And Download.
|