Pioneer Car Stereo System KEH P6021R User Manual

CRD3539A_Eng 9/21/01 4:43 PM Page 1

Multi-CD control High power cassette player

with RDS tuner

Кассетный проигрыватель высокой мощности с

RDS приёмником и управлением многодисковым

проигрывателем компакт-дисков

Operation Manual

KEH-P6021R

Инструкция по эксплуатации

<CRD3539-A>1

Download from Www.Somanuals.com. All Manuals Search And Download.

ENG/MASTER COVER 01

CRD3539A_Eng 9/21/01 4:43 PM Page 3

Section

Contents

Using ITS playlists 23

• Creating a playlist with ITS program-

ming 23

• Playback from your ITS playlist 23

• Erasing a track from your ITS

playlist 24

• Erasing a CD from your ITS playlist 24

Using disc title functions 24

• Entering disc titles 24

Initial Settings

Adjusting initial settings 34

Switching auto PI seek 34

Switching the warning tone 34

Switching the auxiliary setting 35

Switching the dimmer setting 35

Selecting the illumination color 35

Switching the rear output setting 35

• Displaying disc titles 25

• Selecting discs from the disc

title list 26

Using CD TEXT functions 26

• Displaying titles on CD TEXT discs 26

• Scrolling titles in the display 26

Using compression and bass emphasis 27

Other Functions

Using the AUX source 37

• Selecting AUX as the source 37

• Setting the AUX title 37

Cellular telephone muting 37

Additional Information

Cassette tapes 38

Cleaning the playback head 38

Music search and repeat functions 38

Specifications 39

Audio Adjustments

Introduction of audio adjustments 28

Setting the sound focus equalizer 29

Using balance adjustment 29

Using the equalizer 30

• Recalling equalizer curves 30

• Adjusting equalizer curves 30

• Equalizer curve fine adjustment 31

Adjusting bass 31

Adjusting treble 32

Adjusting loudness 32

Using subwoofer output 32

• Adjusting subwoofer settings 33

Adjusting source levels 33

<CRD3539-A>3

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:43 PM Page 4

Section

Before You Start

About this unit

In case of trouble

The tuner frequencies on this unit are allocated

for use in Europe, Asia, the Middle East, Africa

and Oceania. Use in other areas may result in

improper reception. The RDS function operates

only in areas with FM stations broadcasting

RDS signals.

Should this product fail to operate properly,

contact your dealer or nearest authorized

Pioneer Service Station.

Protecting your unit from theft

The front panel can be detached from the head

unit and stored in the protective case provided

to discourage theft.

About this manual

This unit features a number of sophisticated

functions ensuring superior reception and oper-

ation. All the functions have been designed for

the easiest possible use, but many are not self-

explanatory. This operation manual will help you

benefit fully from this product’s potential and to

maximize your listening enjoyment.

We recommend that you familiarize yourself

with the functions and their operation by read-

ing through the manual before you begin using

this unit. It is especially important that you read

and observe precautions on this page and in

other sections.

• If the front panel is not detached from the

head unit within five seconds of turning off the

ignition, a warning tone will sound.

• You can turn off the warning tone. See

Switching the warning tone on page 34.

Important

• Never use force or grip the display and the

buttons tightly when removing or attaching.

• Avoid subjecting the front panel to excessive

shocks.

• Keep the front panel out of direct sunlight and

high temperatures.

This manual explains head unit operation. You

can perform the same operations with the steer-

ing remote control (sold separately).

Precautions

• Keep this manual handy as a reference for

operating procedures and precautions.

• Always keep the volume low enough so you

can hear sounds outside of the car.

• Protect this product from moisture.

• If the battery is disconnected or discharged,

the preset memory will be erased and must be

reprogrammed.

<CRD3539-A>4

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:43 PM Page 5

Section

Before You Start

Removing the front panel

Press OPEN to open the front panel.

Grip the left side of the front panel and pull

it gently outward.

Take care not to grip it tightly or drop it.

Put the front panel into the protective case

provided for safe keeping.

Attaching the front panel

Replace the front panel by holding it upright

to this unit and clipping it securely into the

mounting hooks.

<CRD3539-A>5

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:43 PM Page 6

Section

Before You Start

AUDIO

SELECT

SFEQ

! o

7 BAND/ESC button

What’s What

Press to select among three FM or MW/LW

bands and cancel the control mode of func-

tions.

Head unit

1 DISPLAY button

8 1–6 (PRESET TUNING) buttons

Press for preset tuning and disc number

search when using a multi-CD player.

Press to select different displays.

2 FUNCTION button

Press to select functions.

9 SOURCE button

This unit is switched on by selecting a

source. Press to cycle through all of the

available sources.

3 OPEN button

Press to open the front panel.

4 AUDIO button

0 EQ button

Press to select various sound quality con-

trols.

Press to select various equalizer curves.

- VOLUME button

5 5/∞/2/3 buttons

When you press VOLUME, it extends outward

so that it becomes easier to turn.

To retract the VOLUME, press it again.

Rotate to increase or decrease the volume.

Press to do manual seek tuning, fast for-

ward, reverse and track search controls. Also

used for controlling functions.

6 SFEQ button

= TA button

Press to select a natural sound with pres-

ence.

Press to switch traffic announcements func-

tion on or off.

<CRD3539-A>6

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:43 PM Page 7

Section

Before You Start

Optional remote control

Using the remote control with PGM

button

The steering remote control CD-SR80 is sold

separately. Operation is the same as when

using the button on the head unit. See the

explanation of the head unit about the operation

of each button with the exception of ATT, which

is explained below.

The remote control CD-R600, which is sold sep-

arately, can also operate this unit. It has a PGM

(program) button in which frequently used func-

tions are preprogrammed for each source.

Press PGM to active functions as follows:

~ ATT button

Source

Function name

Page

Press to quickly lower the volume level, by

about 90%. Press once more to return to the

original volume level.

Tuner

BSM (on/off)

(Hold for 2 seconds)

Cassette player

Multi-CD player

Blank skip (on/off)

Pause (on/off)

! VOLUME button

Press to increase or decrease the volume.

<CRD3539-A>7

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:43 PM Page 8

Section

Power ON/OFF

• External unit refers to a Pioneer product (such

as one available in the future) that, although

incompatible as a source, enables control of

basic functions by this unit. Only one external

unit can be controlled by this unit.

Turning the unit on

Press SOURCE to turn the unit on.

When you select a source the unit is turned on.

• When this unit’s blue/white lead is connected

to the car’s auto-antenna relay control termi-

nal, the car’s antenna extends when this

unit’s source is switched on. To retract the

antenna, switch the source off.

Selecting a source

You can select a source you want to listen to. To

switch to the cassette player, load a cassette

tape in this unit (refer to page 18).

Turning the unit off

Press SOURCE to select a source.

Press SOURCE repeatedly to switch between

the following sources:

Press SOURCE and hold for at least one sec-

ond to turn the unit off.

Tuner—Cassette player—Multi-CD player—

External unit—AUX

Notes

• In the following cases, the sound source will

not change:

— When a product corresponding to each

source is not connected to this unit.

— When no cassette is set in this unit.

— When no magazine is set in the multi-CD

player.

— When the AUX (auxiliary) is set to off (refer

to page 35).

<CRD3539-A>8

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:43 PM Page 9

Section

Tuner

Press BAND/ESC to select a band.

Listening to the radio

Press BAND/ESC until the desired band is dis-

played, F1, F2, F3 for FM or MW/LW.

• The FM bands cover different frequency

ranges as below;

F1 (FM1): 65 — 74 MHz

F2 (FM2) , F3 (FM3): 87.5 — 108 MHz

To perform manual tuning, press 2 or 3

These are the basic steps necessary to operate

the radio. More advanced tuner operation is

explained starting on page 10.

with quick presses.

The frequencies move up or down step by step.

This unit’s AF (alternative frequencies search)

function can be switched on and off. AF should

be off for normal tuning operation (refer to page

14).

To perform seek tuning, press and hold 2

or 3 for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

• You can cancel seek tuning by pressing either

2 or 3 with a quick press.

• If you press and hold 2 or 3 you can skip

broadcasting stations. Seek tuning starts as

soon as you release the buttons.

1 BAND indicator

Shows which band the radio is tuned to, MW,

LW or FM.

2 FREQUENCY indicator

Shows to which frequency the tuner is

tuned.

Note

3 PRESET NUMBER indicator

• When the frequency selected is being broad-

cast in stereo the STEREO () indicator will

light.

Shows what preset has been selected.

4 STEREO () indicator

Shows that the frequency selected is being

broadcast in stereo.

Press SOURCE to select the tuner.

Use VOLUME to adjust the sound level.

Rotate to increase or decrease the volume.

<CRD3539-A>9

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:43 PM Page 10

Section

Tuner

Press FUNCTION to display the function

names.

Press FUNCTION repeatedly to switch between

the following functions:

Introduction of advanced tuner

operation

BSM (best stations memory)—REG (regional)—

LOCAL (local seek tuning)—TA (traffic

announcement standby)—NEWS (news pro-

gram interruption)—AF (alternative frequencies

search)

• To return to the frequency display, press

BAND/ESC.

• If MW/LW band is selected, you can only

select BSM or LOCAL.

1 FUNCTION display

Shows the function status.

2 PRESET NUMBER indicator

Note

Shows what preset has been selected.

• If you do not operate the function within about

30 seconds, the display is automatically

returned to the frequency display.

<C_DR_oD_w3_n5_lo3_ad9-_frA_om>1_W0_{ww.Somanuals.com. All Manuals Search And Download.}

CRD3539A_Eng 9/21/01 4:43 PM Page 11

Section

Tuner

Storing and recalling broadcast

frequencies

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals for

good reception.

If you press any of the PRESET TUNING buttons

you can easily store up to six broadcast frequen-

cies for later recall with the touch of a button.

Press FUNCTION to select LOCAL.

Press FUNCTION until LOCAL appears in the

display.

When you find a frequency that you want to

store in memory press a PRESET TUNING but-

ton and hold until the preset number stops

flashing.

The number you have pressed will flash in the

PRESET NUMBER indicator and then remain lit.

The selected radio station frequency has been

stored in memory.

Press 5 to turn local seek tuning on.

Local seek sensitivity (e.g., LOCAL 2) appears in

the display.

Press 2 or 3 to set the sensitivity.

There are four levels of sensitivity for FM and

two levels for MW/LW:

FM: LOCAL 1—LOCAL 2—LOCAL 3—LOCAL 4

MW/LW: LOCAL 1—LOCAL 2

The next time you press the same PRESET TUN-

ING button the radio station frequency is

recalled from memory.

The LOCAL 4 setting allows reception of only the

strongest stations, while lower settings let you

receive progressively weaker stations.

Notes

• Up to 18 FM stations, 6 for each of the three

FM bands, and 6 MW/LW stations can be

stored in memory.

• You can also use 5 and ∞ to recall radio sta-

tion frequencies assigned to PRESET TUNING

buttons.

When you want to return to normal seek

tuning, press ∞ to turn local seek tuning off.

LOCAL :OFF appears in the display.

<CRD3539-A>11

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:44 PM Page 12

Section

Tuner

Storing the strongest broadcast

frequencies

BSM (best stations memory) lets you automati-

cally store the six strongest broadcast frequen-

cies under PRESET TUNING buttons 1–6 and

once stored there you can tune in to those fre-

quencies with the touch of a button.

Press FUNCTION to select BSM.

Press FUNCTION until BSM appears in the dis-

play.

Press 5 to turn BSM on.

BSM begins to flash. While BSM is flashing the

six strongest broadcast frequencies will be

stored under PRESET TUNING buttons in order

of their signal strength. When finished, BSM

stops flashing.

• To cancel the storage process, press ∞.

Note

• Storing broadcast frequencies with BSM may

replace broadcast frequencies you have saved

using PRESET TUNING.

<C_DR_oD_w3_n5_lo3_ad9-_frA_om>1_W2_{ww.Somanuals.com. All Manuals Search And Download.}

CRD3539A_Eng 9/21/01 4:44 PM Page 13

Section

RDS

Press FUNCTION to display the function

names.

Introduction of RDS operation

Press FUNCTION repeatedly to switch between

the following functions:

BSM (best stations memory)—REG (regional)—

LOCAL (local seek tuning)—TA (traffic

announcement standby)—NEWS (news pro-

gram interruption)—AF (alternative frequencies

search)

2 13 4

• To return to the frequency display, press

BAND/ESC.

RDS (radio data system) is a system for provid-

ing information along with FM2 and FM3 bands.

This inaudible information provides such fea-

tures as program service name, program type,

traffic announcement standby and automatic

tuning intended to aid radio listeners in finding

and tuning in to a desired station.

• If MW/LW band is selected, you can only

select BSM or LOCAL.

Notes

• If you do not operate the function within about

30 seconds, the display is automatically

returned to the frequency display.

• RDS service may not be provided by all sta-

tions.

1 AF indicator

Shows when AF (alternative frequencies

search) function is on.

• RDS functions like AF and TA are only active

when your radio is tuned to a RDS station.

2 NEWS indicator

Shows when NEWS (news program interrup-

tion) function is on.

3 TA indicator

Shows when TA (traffic announcement

standby) function is on.

4 TP indicator

Shows when a TP station is tuned in.

5 Program service name

Shows the type of broadcast program.

<CRD3539-A>13

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:44 PM Page 14

Section

RDS

Switching the RDS display

Notes

When you tune in a RDS station its program

service name is displayed. If you want to know

the frequency you can.

• Only RDS stations are tuned in during seek

tuning or BSM when AF is on.

• When you recall a preset station, the tuner

may update the preset station with a new

frequency from the station’s AF list. (This is

only available when using presets on the F2 or

F3 band.) No preset number appears on the

display if the RDS data for the station received

differs from that for the originally stored sta-

tion.

• Sound may be temporarily interrupted by

another program during a AF frequency

search.

• When the tuner is tuned to a non-RDS station

the AF indicator flashes.

Press DISPLAY.

Press DISPLAY repeatedly to switch between

the following settings:

Program service name—PTY information—

Frequency

PTY (program type ID code) information is listed

on page 17.

• PTY information and the frequency of the

current station appears on the display for eight

seconds.

• If a PTY code of zero is received from a station,

NONE is displayed. This indicates that the sta-

tion has not defined its program contents.

• If the signal is too weak for this unit to pick up

the PTY code, NO PTY is displayed.

• AF can be switched on or off independently

for each FM band.

Using PI seek

If the unit fails to find a suitable alternative fre-

quency, or if you are listening to a broadcast

and the reception becomes weak, the unit will

automatically search for a different station with

the same programming. During the search, PI

SEEK is displayed and the output is muted. The

muting is discontinued after completion of the

PI seek, whether or not a different station is

found.

Selecting alternative frequencies

If you are listening to a broadcast and the recep-

tion becomes weak or there are other problems,

the unit will automatically search for a different

station in the same network which is broadcast-

ing a stronger signal.

• AF is on as a default.

Press FUNCTION to select AF.

Press FUNCTION until AF appears in the dis-

play.

Press 5 to turn AF on.

Press 5 and AF :ON is displayed.

Press ∞ to turn AF off.

Press ∞ and AF :OFF is displayed.

<C_DR_oD_w3_n5_lo3_ad9-_frA_om>1_W4_{ww.Somanuals.com. All Manuals Search And Download.}

CRD3539A_Eng 9/21/01 4:44 PM Page 15

Section

RDS

Using auto PI seek for preset stations

Receiving traffic announcements

When present stations cannot be recalled, as

when travelling long distances, the unit can be

set to perform PI seek during preset recall.

• The default setting for auto PI seek is off. See

Switching auto PI seek on page 34.

TA (traffic announcement standby) lets you

receive traffic announcements automatically,

no matter what source you are listening to. TA

can be activated for both a TP station (a station

that broadcasts traffic information) or an

enhanced other network’s TP station (a station

carrying information which cross-references TP

stations).

Limiting stations to regional program-

ming

Tune in a TP or enhanced other network’s

When AF is used to automatically retune fre-

quencies, the regional function limits the selec-

tion to stations broadcasting regional

programs.

TP station.

When you are tuned into a TP or enhanced other

network’ s TP station the TP indicator will light.

Press TA to turn traffic announcement

Press FUNCTION to select REG.

standby on.

Press FUNCTION until REG appears in the dis-

Press TA and the TA indicator appears in the

display. The tuner will standby for traffic

announcements.

play.

Press 5 to turn the regional function on.

• To turn traffic announcements standby off,

press TA again.

Press 5 and REG :ON is displayed.

Press ∞ to turn the regional function off.

Use VOLUME to adjust the TA volume when

Press ∞ and REG :OFF is displayed.

a traffic announcement begins.

Rotate to increase or decrease the volume.

The newly set volume is stored in memory and

recalled for subsequent traffic announcements.

Notes

• Regional programming and regional networks

are organized differently depending on the

country (i.e., they may change according to

the hour, state or broadcast area).

• The preset number may disappear on the

display if the tuner tunes in a regional station

which differs from the originally set station.

• REG can be turned on or off independently for

each FM band.

Press TA while a traffic announcement is

being received to cancel the announcement.

The tuner returns to the original source but

remains in the standby mode until TA is pressed

again.

<CRD3539-A>15

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:44 PM Page 16

Section

RDS

Using PTY functions

Notes

• You can also turn the TA function on or off by

pressing FUNCTION.

You can tune in a station by using PTY informa-

tion.

• The system switches back to the original

source following traffic announcement recep-

tion.

Using news program interruption

• TA can be activated from sources other than

the tuner if the tuner was last set to the FM

band but not if it was last set to the MW/LW

band.

• If the tuner was last set to FM, turning on TA

lets you operate other tuning functions while

listening to sources other than the tuner.

• Only TP and enhanced other network’s TP

stations are tuned in during seek tuning or

BSM when TA is on.

When a news program is broadcast from a PTY

code news station the unit can switch from any

station to the news broadcast station. When the

news program ends, reception of the previous

program resumes.

Press TA and hold to turn on news program

interruption.

Press TA until NEWS appears in the display.

• To turn off news program interruption, press

TA and hold until NEWS disappears from the

display.

Responding to the TP alarm

When a TP or enhanced other network’s TP

station is lost due to a weak signal the TP indi-

cator is extinguished and a series of short

beeps, about five seconds long, sound to

remind you to select another TP or enhanced

other network‘s TP station.

Note

• You can also turn on or off news program

interruption by pressing FUNCTION.

Receiving PTY alarm broadcasts

When listening to the tuner, tune in another

TP or enhanced other network’s TP station.

• When listening to sources other than the

tuner the unit will automatically seek out a TP

station with the strongest signal after a 10- or

30-second delay. The delay is 10 seconds if TA is

on and 30 seconds if TA and AF are on.

PTY alarm is a special PTY code for announce-

ments regarding emergencies such as natural

disasters. When the tuner receives the radio

alarm code, ALARM appears on the display and

the volume adjusts to the TA volume. When the

station stops broadcasting the emergency

announcement, the system returns to the previ-

ous source.

• An emergency announcement can be can-

celled by pressing TA.

<C_DR_oD_w3_n5_lo3_ad9-_frA_om>1_W6_{ww.Somanuals.com. All Manuals Search And Download.}

CRD3539A_Eng 9/21/01 4:44 PM Page 17

Section

RDS

PTY list

Specific

Type of program

NEWS

AFFAIRS

INFO

News

Current affairs

General information and advice

Sports

SPORT

WEATHER

FINANCE

POP MUS

ROCK MUS

EASY MUS

OTH MUS

JAZZ

COUNTRY

NAT MUS

OLDIES

FOLK MUS

L. CLASS

CLASSIC

EDUCATE

DRAMA

CULTURE

SCIENCE

VARIED

Weather reports/meteorological information

Stock market reports, commerce, trading, etc.

Popular music

Contemporary modern music

Easy listening music

Non categorized music

Jazz

Country music

National music

Oldies music, golden oldies

Folk music

Light classical music

Serious classical music

Educational programs

All radio plays and serials

National or regional culture

Nature, science and technology

Light entertainment

CHILDREN

SOCIAL

RELIGION

PHONE IN

TOURING

LEISURE

DOCUMENT

Children’s

Social affairs

Religion affairs or services

Phone in

Travel programs, not for announcements about traffic problems

Hobbies and recreational activities

Documentaries

<CRD3539-A>17

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:44 PM Page 18

Section

Cassette Player

Playing a tape

• After a casette tape has been inserted, press

SOURCE to select the cassette player.

Use VOLUME to adjust the sound level.

Rotate to increase or decrease the volume.

To perform fast forward or rewind, press 2

or 3.

FF or REW appears in the display.

• To cancel fast forward or rewind and return to

playback, press BAND/ESC.

• You can cancel fast forward or rewind by

pressing 2 or 3 in the same direction twice.

These are the basic steps necessary to play a

tape with your cassette player. More advanced

cassette player operation is explained starting

on page 19.

1 TAPE DIRECTION indicator

To perform forward or rewind music

Shows the direction of the tape transport.

search, press 2 or 3 twice.

F-MS (forward music search) or R-MS (rewind

music search) appears in the display. The cas-

sette player will fast forward or rewind to the

next or previous blank spot on the tape and

begin to play.

2 PLAY TIME indicator

Shows the elapsed playing time of the cur-

rent side of the tape.

Press OPEN to open the front panel.

• To cancel music search and return to play-

back, press BAND/ESC.

Cassette loading slot appears.

• You can cancel music search by pressing 2

or 3 in the same direction again.

Insert a cassette tape into the cassette

loading slot.

Playback will automatically start.

To change the direction of the tape trans-

port, press BAND/ESC.

Cassette loading slot

Notes

• Do not insert anything other than a cassette

tape into the cassette loading slot.

• PLAY TIME indicator starts from 00’00” in the

following cases:

— When a tape is inserted

— When the tape direction is changed

— When you rewind the tape to the beginning

• PLAY TIME indicator is halted when fast for-

ward, rewind or music search is operating.

TAPE EJECT button

• You can eject a cassette tape by pressing

TAPE EJECT.

Close the front panel.

<C_DR_oD_w3_n5_lo3_ad9-_frA_om>1_W8_{ww.Somanuals.com. All Manuals Search And Download.}

CRD3539A_Eng 9/21/01 4:44 PM Page 19

Section

Cassette Player

Press ∞ to turn repeat play off.

Introduction of advanced

cassette player operation

REPEAT :OFF appears in the display. The track

presently playing will continue to play and then

play the next track.

Skipping blank tape sections

Blank skip automatically fast forwards to the

next song if there is a long period of silence (12

seconds or longer) between songs.

1 FUNCTION display

Shows the function status.

Press FUNCTION to select B-SKIP.

Press FUNCTION until B-SKIP appears in the

display.

Press FUNCTION to display the function

names.

Press FUNCTION repeatedly to switch between

the following functions:

REPEAT (repeat play)—B-SKIP (blank skip)—RI

(radio intercept)

Press 5 to turn blank skip on.

B-SKIP :ON appears in the display. Long peri-

ods of silence between songs will be skipped.

• To return to the playback display, press

BAND/ESC.

Press ∞ to turn blank skip off.

B-SKIP :OFF appears in the display. The com-

plete cassette tape will play.

Note

• If you do not operate the function within about

30 seconds, the display is automatically

returned to the playback display.

Radio intercept

This function allows you to listen to the radio

during tape fast-forwarding/rewinding.

The radio intercept function does not work dur-

ing a Music Search operation.

Repeating play

Repeat play lets you hear the same track over

again.

Press FUNCTION to select RI.

Press FUNCTION until RI appears in the display.

Press FUNCTION to select REPEAT.

Press 5 to turn radio intercept on.

Press FUNCTION until REPEAT appears in the

display.

RI :ON appears in the display.

Press ∞ to turn radio intercept off.

Press 5 to turn repeat play on.

RI :OFF appears in the display.

REPEAT :ON appears in the display. The track

presently playing will play and then repeat.

<CRD3539-A>19

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:44 PM Page 20

Section

Multi-CD Player

Playing a CD

To skip back or forward to another track,

press 2 or 3.

Pressing 3 skips to the start of the next track.

Pressing 2 once skips to the start of the current

track. Pressing again will skip to the previous

track.

Notes

You can use this unit to control a multi-CD player,

which is sold separately.

These are the basic steps necessary to play a

CD with your multi-CD player. More advanced

CD operation is explained starting on page 21.

• When the multi-CD player performs the

preparatory operations, READY is displayed.

• If the multi-CD player does not operate prop-

erly, an error message such as ERROR-14 may

be displayed. Refer to the multi-CD player

owner’s manual.

1 DISC NUMBER indicator

• If there are no discs in the multi-CD player

magazine, NO DISC is displayed.

Shows the disc currently playing.

2 TRACK NUMBER indicator

Shows the track currently playing.

50-disc multi-CD player

3 PLAY TIME indicator

Shows the elapsed playing time of the cur-

rent track.

Only those functions described in this manual

are supported for 50-disc multi-CD players.

Press SOURCE to select the multi-CD

player.

Press SOURCE until you see Multi-CD displayed.

Use VOLUME to adjust the sound level.

Rotate to increase or decrease the volume.

Select a disc you want to listen to with the

1 to 6 buttons.

For discs located at 1 to 6, press the correspond-

ing number button.

If you want to select a disc located at 7 to 12,

press and hold the corresponding numbers

such as 1 for disc 7, until the disc number

appears in the display.

• You can also sequentially select a disc by

pressing 5/∞.

To perform fast forward or reverse, press

and hold 2 or 3.

<C_DR_oD_w3_n5_lo3_ad9-_frA_om>2_W0_{ww.Somanuals.com. All Manuals Search And Download.}

CRD3539A_Eng 9/21/01 4:44 PM Page 21

Section

Multi-CD Player

Introduction of advanced multi-

CD player operation

Repeating play

There are three repeat play ranges for the multi-

CD player: MCD (multi-CD player repeat), TRK

(one-track repeat), and DSC (disc repeat).

Press FUNCTION to select REPEAT.

Press FUNCTION until REPEAT appears in the

display.

Press 2 or 3 to select the repeat range.

1 FUNCTION display

Press 2 or 3 until the desired repeat range

appears in the display.

Shows the function status.

• MCD — Repeat all discs in the multi-CD

player

• TRK — Repeat just the current track

• DSC — Repeat the current disc

Press FUNCTION to display the function

names.

Press FUNCTION repeatedly to switch between

the following functions:

REPEAT (repeat play)—TITLE LIST (disc title

list)—RANDOM (random play)—SCAN (scan

play)—ITS-P (ITS play)—PAUSE (pause)—

COMP (compression and DBE)

• To return to the playback display, press

BAND/ESC.

Notes

• If you select other discs during repeat play,

the repeat play range changes to MCD (multi-

CD player repeat).

• If you perform track search or fast

forward/reverse during TRK (one-track

repeat), the repeat play range changes to DSC

(disc repeat).

Note

• If you do not operate the function within about

30 seconds, the display is automatically

returned to the playback display.

<CRD3539-A>21

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:44 PM Page 22

Section

Multi-CD Player

Press 5 to turn scan play on.

Playing tracks in a random order

SCAN :ON appears in the display. The first 10

seconds of each track of the present disc (or the

first track of each disc) is played.

Random play lets you play back tracks in a ran-

dom order within the repeat range, MCD (multi-

CD player repeat) and DSC (disc repeat).

When you find the desired track (or disc)

Select the repeat range.

press ∞ to turn scan play off.

Refer to Repeating play on page 21.

SCAN :OFF appears in the display. The track (or

disc) will continue to play.

Press FUNCTION to select RANDOM.

• If the display has automatically returned to

the playback display, select SCAN again by

pressing FUNCTION.

Press FUNCTION until RANDOM appears in the

display.

Press 5 to turn random play on.

Note

RANDOM :ON appears in the display. Tracks will

play in a random order within the previously

selected MCD (multi-CD player repeat) or DSC

(disc repeat) ranges.

• After track or disc scanning is finished, nor-

mal playback of the tracks will begin again.

Press ∞ to turn random play off.

RANDOM :OFF appears in the display. Tracks

will continue to play in order.

Pausing CD playback

Pause lets you temporarily stop playback of the

CD.

Scanning CDs and tracks

Press FUNCTION to select PAUSE.

While you are using DSC (disc repeat), the

beginning of each track on the selected disc

plays for about 10 seconds. When you are using

MCD (multi-CD player repeat), the beginning of

the first track of each disc is played for about 10

seconds.

Press FUNCTION until PAUSE appears in the

display.

Press 5 to turn pause on.

PAUSE :ON appears in the display. Play of the

current track pauses.

Select the repeat range.

Press ∞ to turn pause off.

Refer to Repeating play on page 21.

PAUSE :OFF appears in the display. Play will

resume at the same point that you turned pause

on.

Press FUNCTION to select SCAN.

Press FUNCTION until SCAN appears in the

display.

<C_DR_oD_w3_n5_lo3_ad9-_frA_om>2_W2_{ww.Somanuals.com. All Manuals Search And Download.}

CRD3539A_Eng 9/21/01 4:44 PM Page 23

Section

Multi-CD Player

Using ITS playlists

Playback from your ITS playlist

ITS play lets you listen to the tracks that you

have entered into your ITS playlist. When you

turn on ITS play, tracks from your ITS playlist in

the multi-CD player will begin to play.

ITS (instant track selection) lets you make a

playlist of favorite tracks from those in the multi-

CD player magazine. After you have added your

favorite tracks to the playlist you can turn on ITS

play and play just those selections.

Select the repeat range.

Refer to Repeating play on page 21.

Creating a playlist with ITS program-

ming

Press FUNCTION to select ITS-P.

Press FUNCTION until ITS-P appears in the

You can use ITS to enter and playback up to 99

tracks per disc, up to 100 discs (with the disc

title). (With multi-CD players sold before the

CDX-P1250 and CDX-P650, up to 24 tracks can

be stored in the playlist.)

display.

Press 5 to turn ITS play on.

ITS-P :ON appears in the display. Playback

begins of those tracks from your playlist within

the previously selected MCD (multi-CD player

repeat) or DSC (disc repeat) ranges.

• If no tracks in the current range are

programmed for ITS play then ITS EMPTY is

displayed.

Play a CD that you want to program.

Press 5 or ∞ to select a CD.

Press FUNCTION and hold until TITLE IN

appears in the display, then press FUNCTION

to select ITS.

Press ∞ to turn ITS play off.

After TITLE IN is displayed, press FUNCTION

repeatedly, the following functions appear in the

display:

ITS-P :OFF appears in the display. Playback will

continue in normal order from the currently

playing track and CD.

TITLE IN (disc title input)—ITS (ITS program-

ming)

Select a desired track by pressing 2 or 3.

Press 5 to store the currently playing track

in the playlist.

IN is displayed briefly and the currently playing

selection is added to your playlist.

Press BAND/ESC to return to the playback

display.

Note

• After data for 100 discs has been stored in

memory, data for a new disc will overwrite the

oldest one.

<CRD3539-A>23

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:44 PM Page 24

Section

Multi-CD Player

Play a CD that you want to delete.

Erasing a track from your ITS playlist

Press 5 or ∞ to select a CD.

When you want to delete a track from your ITS

playlist, you can if ITS play is on.

If ITS play is already on, skip to step 2. If ITS play

is not already on, press FUNCTION.

Press FUNCTION and hold until TITLE IN

appears in the display, then press FUNCTION

to select ITS.

After TITLE IN is displayed, press FUNCTION

until ITS appears in the display.

Play a CD you want to delete a track from

your ITS playlist, and turn ITS play on.

Refer to Playback from your ITS playlist on page

23.

Press ∞ to erase all tracks on the currently

playing CD from your ITS playlist.

All tracks on the currently playing CD are erased

from your playlist and ITS CLEAR is displayed.

Press FUNCTION and hold until TITLE IN

appears in the display, then press FUNCTION

to select ITS.

After TITLE IN is displayed, press FUNCTION

until ITS appears in the display.

Press BAND/ESC to return to the playback

display.

Select a desired track by pressing 2 or 3.

Using disc title functions

Press ∞ to erase a track from your ITS

playlist.

You can input CD titles and display the title.

Then you can easily search for and select a

desired disc for play.

The currently playing selection is erased from

your ITS playlist and playback of the next track

from your ITS playlist begins.

• If there are no tracks from your playlist in the

current range, ITS EMPTY is displayed and

normal play resumes.

Entering disc titles

Disc title input lets you input CD titles up to 10

letters long and up to 100 disc titles (with ITS

playlist) into the multi-CD player.

Press BAND/ESC to return to the playback

display.

Play a CD that you want to enter the title.

Press 5 or ∞ to select a CD.

Erasing a CD from your ITS playlist

When you want to delete all tracks of a CD from

your ITS playlist, you can if ITS play is off.

Press FUNCTION and hold until TITLE IN

appears in the display.

After TITLE IN is displayed, press FUNCTION

repeatedly, the following functions appear in the

display:

TITLE IN (disc title input)—ITS (ITS program-

ming)

<C_DR_oD_w3_n5_lo3_ad9-_frA_om>2_W4_{ww.Somanuals.com. All Manuals Search And Download.}

CRD3539A_Eng 9/21/01 4:44 PM Page 25

Section

Multi-CD Player

• When playing a CD TEXT disc on a CD TEXT

compatible multi-CD player, you cannot switch

to TITLE IN. The disc title will have already been

recorded on a CD TEXT disc.

Displaying disc titles

You can display the title of any disc that has had

a disc title entered.

Press DISPLAY.

Press DISPLAY repeatedly to switch between

the following settings:

PLAY TIME (playback time)—DISC TITLE (disc

title)

When you select DISC TITLE, the title of the

currently playing disc is shown in the display.

• If no title has been entered for the currently

playing disc, NO TITLE is displayed.

bet.

Press 5 or ∞ to select a letter of the alpha-

Each press of 5 will display a letter of the alpha-

bet in A B C ... X Y Z, numbers and symbols in 1 2

3 ... @ # < order. Each press of ∞ will display a

letter in the reverse order, such as Z Y X ... C B A

order.

Press 3 to move the cursor to the next

character position.

When the letter you want is displayed, press 3

to move the cursor to the next position and then

select the next letter. Press 2 to move back-

wards in the display.

Move the cursor to the last position by

pressing 3 after entering the title.

When you press 3 one more time, the entered

title is stored in memory.

Press BAND/ESC to return to the playback

display.

Notes

• Titles remain in memory, even after the disc

has been removed from the magazine, and

are recalled when the disc is reinserted.

• After data for 100 discs has been stored in

memory, data for a new disc will overwrite the

oldest one.

<CRD3539-A>25

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:44 PM Page 26

Section

Multi-CD Player

Selecting discs from the disc title list

Displaying titles on CD TEXT discs

Disc title list lets you see the list of disc titles

that have been entered into the multi-CD player

and select one of them to playback.

Press DISPLAY when playing a CD TEXT disc

from the multi-CD player.

Press DISPLAY repeatedly to switch between

the following settings:

Press FUNCTION to select TITLE LIST.

Press FUNCTION until TITLE LIST appears in

the display.

PLAY TIME (playback time)—DISC TITLE (disc

title)—D.ARTIST (disc artist)—TRK TITLE

(track title)—T.ARTIST (track artist)

• If specific information has not been recorded

on a CD TEXT disc, NO XXXX will be displayed

(e.g., NO D-TITLE).

Press 2 or 3 to scroll through the list of

titles that have been entered.

• Nothing is displayed for disc whose titles have

not been input.

Press 5 to play your favorite CD title.

Scrolling titles in the display

That selection will begin to play.

This unit can display the first 10 letters only of

DISC TITLE, D.ARTIST, TRK TITLE and

T.ARTIST. When the recorded information is

longer than 10 letters, you can scroll the text to

the left so that the rest of the title can be seen.

Using CD TEXT functions

You can use these functions only with a CD TEXT

compatible multi-CD player.

Press DISPLAY and hold until the title begins

to scroll to the left.

The rest of the title will appear in the display.

Some discs have certain information encoded

on the disc during manufacture. These discs

may contain such information as the CD title,

track title, artist’s name and playback time and

are called CD TEXT discs. Only these specially

encoded CD TEXT discs support the functions

listed below.

<C_DR_oD_w3_n5_lo3_ad9-_frA_om>2_W6_{ww.Somanuals.com. All Manuals Search And Download.}

CRD3539A_Eng 9/21/01 4:44 PM Page 27

Section

Multi-CD Player

Using compression and bass

emphasis

You can use these functions only with a multi-CD

player that supports them.

Using COMP (compression) and DBE (dynamic

bass emphasis) functions let you adjust the

sound playback quality of the multi-CD player.

Each of the functions have a two-step adjust-

ment. The COMP function balances the output

of louder and softer sounds at higher volumes.

DBE boosts bass levels to give playback a fuller

sound. Listen to each of the effects as you select

through them and use the one that best

enhances the playback of the track or CD that

you are listening to.

Press FUNCTION to select COMP.

Press FUNCTION until COMP appears in the

display.

• If the multi-CD player does not support

COMP/DBE, NO COMP is displayed when you

attempt to select it.

Press 5 or ∞ to select your favorite setting.

Press 5 or ∞ repeatedly to switch between the

following settings:

COMP OFF—COMP 1—COMP 2—COMP OFF—

DBE 1—DBE 2

<CRD3539-A>27

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:44 PM Page 28

Section

Audio Adjustments

Press AUDIO to display the audio function

names.

Introduction of audio adjustments

Press AUDIO repeatedly to switch between the

following audio functions:

FADER (balance adjustment)—EQ (equalizer

curve fine adjustment)—BASS (bass)—TRE

(treble)—LOUD (loudness)—SUB.W (subwoofer

output)—80HZ0 (subwoofer setting

adjustment)—SLA (source level adjustment)

• When selecting the FM tuner as the source,

you cannot switch to SLA.

1 AUDIO display

• To return to the display of each source, press

BAND/ESC.

Shows the audio adjustments status.

2 LOUD indicator

Appears in the display when loudness is

turned on.

Notes

• If you do not operate the audio function within

about 30 seconds, the display is automatically

returned to the source display.

• Audio Menu functions change depending on

the rear output setting in the Initial Setting

Menu. Refer to Switching the rear output set-

ting on page 35.

3 SW indicator

Appears in the display when subwoofer is

turned on.

4 F1 or F2 indicator

The F1 or F2 indicator lights depending on

the SFEQ setting.

5 CUSTOM indicator

Appears in the display when equalization is

adjusted.

<C_DR_oD_w3_n5_lo3_ad9-_frA_om>2_W8_{ww.Somanuals.com. All Manuals Search And Download.}

CRD3539A_Eng 9/21/01 4:44 PM Page 29

Section

Audio Adjustments

Setting the sound focus equalizer

Using balance adjustment

Clarifying the sound image of vocals and instru-

ments allows the simple staging of a natural,

pleasant sound environment.

You can select a fader/balance setting that pro-

vides an ideal listening environment in all occu-

pied seats.

Even greater listening enjoyment will be

obtained if seating positions are chosen care-

fully.

• FRT1 boosts the treble on the front output and

the bass on the rear output.

FRT2 boosts the treble and the bass on the front

output and the bass on the rear output. (The

bass boost is the same for both front and rear.)

For both FRT1 and FRT2 the HI setting provides

a more pronounced effect than the LOW setting.

Press AUDIO to select FADER.

Press AUDIO until FADER appears in the dis-

play.

• If the balance setting has been previously

adjusted, BAL will be displayed.

Press 5 or ∞ to adjust front/rear speaker

balance.

Each press of 5 or ∞ moves the front/rear

speaker balance towards the front or the rear.

• FADER :F15 – FADER :R15 is displayed as the

front/rear speaker balance moves from front to

rear.

• FADER : 0 is the proper setting when only two

speakers are used.

• When the rear output setting is subwoofer,

you cannot adjust front/rear speaker balance.

Refer to Switching the rear output setting on

page 35.

Press SFEQ to select the desired SFEQ

mode.

Press SFEQ repeatedly to switch between the

following setting:

FRT1-HI (front 1-high)—FRT1-LOW (front 1-

low)—FRT2-HI (front 2-high)—FRT2-LOW (front

2-low)—CUSTOM (custom)—SFEQ OFF (off)

Selected mode (e.g., F1) appears in the display.

Press 2 or 3 to select the desired position.

Press 2 or 3 until the desired position appears

in the display.

Press 2 or 3 to adjust left/right speaker

balance.

L (left)—C (center)—R (right)

When you press 2 or 3, BAL : 0 is displayed.

Each press of 2 or 3 moves the left/right

speaker balance towards the left or the right.

• BAL :L9 – BAL :R9 is displayed as the left/right

speaker balance moves from left to right.

Note

• If you adjust the bass or treble, CUSTOM

memorizes an SFEQ mode in which the bass

and treble are adjusted for personal prefer-

ence.

<CRD3539-A>29

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:44 PM Page 30

Section

Audio Adjustments

Using the equalizer

Press EQ to select the equalizer.

• If the equalizer has been previously set to an

equalizer curve other than POWERFUL then the

title of that previously selected equalizer curve

will be displayed, such as NATURAL, VOCAL,

CUSTOM1, CUSTOM2, EQ FLAT or SUPER

BASS.

The equalizer lets you adjust the equalization to

match car interior acoustic characteristics as

desired.

Recalling equalizer curves

There are seven stored equalizer curves which

you can easily recall at any time. Here is a list of

the equalizer curves:

Adjusting equalizer curves

You can adjust the currently selected equalizer

curve setting as desired. Adjusted equalizer

curve settings are memorized in CUSTOM1 or

CUSTOM2.

Display

Equalizer curve

Powerful

Natural

POWERFUL

NATURAL

VOCAL

Press AUDIO to select the equalizer mode.

Press AUDIO until EQ-LOW/EQ-MID/EQ-HIGH

appears in the display.

Vocal

CUSTOM1, 2

EQ FLAT

Custom 1, 2

Flat

Select the band you want to adjust with

the 2/3.

SUPER BASS

Super bass

EQ-LOW (low)—EQ-MID (mid)—EQ-HIGH (high)

• CUSTOM1 and CUSTOM2 are adjusted equal-

izer curves that you create.

• A separate CUSTOM1 curve can be created

for each source.

• If you make adjustments when a curve other

than CUSTOM2 is selected, the equalizer curve

settings are memorized in CUSTOM1 .

• A CUSTOM2 curve can be created common to

all sources.

Press 5 or ∞ to adjust the equalizer curve.

Each press of 5 or ∞ increases or decreases

the equalizer curve respectively.

• +6 – –6 is displayed as the equalizer curve is

increased or decreased.

• The actual range of the adjustments are differ-

ent depending on which equalizer curve is

selected.

• If you make adjustments when the CUSTOM2

curve is selected, the CUSTOM2 curve is

updated.

• When EQ FLAT is selected no supplement or

correction is made to the sound. This is useful

to check the effect of the equalizer curves by

switching alternatively between EQ FLAT and a

set equalizer curve.

Note

• If you make adjustments when a curve other

than CUSTOM2 is selected, the newly

adjusted curve will replace the previous CUS-

TOM1 curve.

<C_DR_oD_w3_n5_lo3_ad9-_frA_om>3_W0_{ww.Somanuals.com. All Manuals Search And Download.}

CRD3539A_Eng 9/21/01 4:44 PM Page 31

Section

Audio Adjustments

Equalizer curve fine adjustment

Adjusting bass

You can adjust the center frequency and the Q

factor (curve characteristics) of each currently

selected curve band (EQ-LOW/EQ-MID/EQ-

HIGH).

You can adjust the cut-off frequency and the

bass level.

In FRT1 mode, bass adjustment affects only the

rear output: front output cannot be adjusted.

Press AUDIO to select BASS.

Level (dB)

Press AUDIO until BASS appears in the display.

Q=2W

Q=2N

Select the desired frequency with 2/3.

Center frequency

Frequency (Hz)

Press 2 or 3 until the desired frequency

appears in the display.

40—63—100—160 (Hz)

Press AUDIO and hold until frequency and

the Q factor (e.g., F-80 Q-1W) appears in the

display.

Press 5 or ∞ to adjust the bass level.

Each press of 5 or ∞ increases or decreases

the bass level. +6 – –6 displayed as the level is

increased or decreased.

Press AUDIO to select the desired band for

adjustment.

Press AUDIO repeatedly to switch between the

following bands:

EQ-LOW (low)—EQ-MID (mid)—EQ-HIGH (high)

Press 2/3 to select the desired frequency.

Press 2 or 3 until the desired frequency

appears in the display.

LOW: 40—80—100—160 (Hz)

MID: 200—500—1K—2K (Hz)

HIGH: 3K—8K—10K—12K (Hz)

Press 5/∞ to select the desired Q factor.

Press 5 or ∞ until the desired Q factor appears

in the display.

2N—1N—1W—2W

Note

• If you make adjustments when a curve other

than CUSTOM2 is selected, CUSTOM1 curve

is updated.

<CRD3539-A>31

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:44 PM Page 32

Section

Audio Adjustments

Adjusting treble

Using subwoofer output

You can adjust the cut-off frequency and the

Treble level.

In FRT1 and FRT2 modes, treble adjustment

affects only the front output: rear output cannot

be adjusted.

This unit is equipped with a subwoofer output

which can be switched on or off. When a sub-

woofer is connected to the rear output, first,

switch the rear output setting to subwoofer,

then turn the subwoofer output on. For more

details, see Switching the rear output setting on

page 35.

Press AUDIO to select TRE.

Press AUDIO until TRE appears in the display.

Press AUDIO to select SUB.W.

Select the desired frequency with 2/3.

When the rear output setting is subwoofer, you

can select SUB.W. Press AUDIO until SUB.W

appears in the display.

Press 2 or 3 until the desired frequency

appears in the display.

2K—4K—6K—10K (Hz)

Press 5 to turn subwoofer output on.

Press 5 or ∞ to adjust the treble level.

SUB.W :ON appears in the display. Subwoofer

Each press of 5 or ∞ increases or decreases

the treble level. +6 – –6 displayed as the level is

increased or decreased.

output is now on.

Press ∞ to turn subwoofer output off.

SUB.W :OFF appears in the display. Subwoofer

output is now off.

Adjusting loudness

Loudness compensates for deficiencies in the

low- and high-sound ranges at low volume.

Press AUDIO to select LOUD.

Press AUDIO until LOUD appears in the display.

Press 5 to turn loudness on.

Loudness level (e.g., LOUD :MID) appears in the

display.

Press 2 or 3 to select the level.

Press 2 or 3 until the desired level appears in

the display.

LOW (low)—MID (mid)—HI (high)

Press ∞ to turn loudness off.

LOUD :OFF appears in the display.

<C_DR_oD_w3_n5_lo3_ad9-_frA_om>3_W2_{ww.Somanuals.com. All Manuals Search And Download.}

CRD3539A_Eng 9/21/01 4:44 PM Page 33

Section

Audio Adjustments

Adjusting subwoofer settings

Adjusting source levels

When the subwoofer output is on, you can

adjust the cut-off frequency and the output level

of the subwoofer.

SLA (Source level adjustment) lets you adjust

the volume level of each source to prevent radi-

cal changes in volume when switching between

sources.

• Settings are based on the volume level of the

FM tuner, which remains unchanged.

Press AUDIO to select the subwoofer set-

ting.

When the subwoofer output is on, you can

select the subwoofer setting. Press AUDIO until

80Hz appears in the display.

• If the subwoofer setting has been previously

adjusted, the frequency of that previously

selected will be displayed, such as 50Hz or

125Hz.

Compare the FM tuner volume level with

the level of the source you wish to adjust (e.g.,

built-in CD player).

Press AUDIO to select SLA.

Press AUDIO until SLA appears in the display.

Press 2 or 3 to select cut-off frequency.

Press 5 or ∞ to adjust the source volume.

Press 2 and 50Hz is displayed. Press 3 and

125Hz is displayed. Only frequencies lower than

those in the selected range are output from the

subwoofer.

Each press of 5 or ∞ increases or decreases

the source volume.

• SLA :+4 – SLA :–4 is displayed as the source

volume is increased or decreased.

Press 5 or ∞ to adjust the output level of

the subwoofer.

Notes

Each press of 5 or ∞ increases or decreases

the level of the subwoofer (e.g., +6 to –6).

Press 5 or ∞ until you see the desired value

displayed.

• Since the FM tuner volume is the control, it is

not possible to apply source level adjustments

to the FM tuner.

• The MW/LW tuner volume level can also be

adjusted with source level adjustments.

<CRD3539-A>33

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:44 PM Page 34

Section

Initial Settings

Adjusting initial settings

Switching auto PI seek

The unit can automatically search for a different

station with the same programming, even dur-

ing preset recall.

Press FUNCTION to select A-PI.

Press FUNCTION repeatedly until A-PI appears

in the display.

Initial settings lets you perform initial set up of

different settings for this unit.

Select A-PI on or off with 5/∞.

Pressing 5/∞ will switch A-PI between on and

off and that status will be displayed (e.g.,

A-PI :ON).

1 FUNCTION display

Shows the function status.

Press SOURCE and hold until the unit turns

off.

Switching the warning tone

Press FUNCTION and hold until A-PI

appears in the display.

If the front panel is not detached from the head

unit within five seconds of turning off the igni-

tion, a warning tone will sound. You can turn off

this warning tone.

Press FUNCTION to select one of the initial

settings.

Press FUNCTION repeatedly to switch between

the following settings:

A-PI—WARN—AUX—DIMMER—ILL.CLR —

FRT+REAR

Press FUNCTION to select WARN.

Press FUNCTION repeatedly until WARN

appears in the display.

Use the following instructions to operate each

particular setting.

• To cancel initial settings, press BAND/ESC.

• You can also cancel initial settings by holding

down FUNCTION until the unit turns off.

Select WARN on or off with 5/∞.

Pressing 5/∞ will switch WARN between on

and off and that status will be displayed (e.g.,

WARN :ON).

<C_DR_oD_w3_n5_lo3_ad9-_frA_om>3_W4_{ww.Somanuals.com. All Manuals Search And Download.}

CRD3539A_Eng 9/21/01 4:44 PM Page 35

Section

Initial Settings

Switching the auxiliary setting

Selecting the illumination color

It is possible to use auxiliary equipment with

this unit. Activate the auxiliary setting when

using auxiliary equipment connected to this

unit.

This product is equipped with two illumination

colors, green and red.

You can select the desired illumination color.

Press FUNCTION to select ILL. CLR.

Press FUNCTION to select AUX.

Press FUNCTION repeatedly until AUX appears

Select the desired illumination color with

in the display.

2/3.

Pressing 2/3 will switch ILL. CLR between red

or green and that status will be displayed (e.g.,

ILL. CLR :GRN).

Select AUX on or off with 5/∞.

Pressing 5/∞ will switch AUX between on and

off and that status will be displayed (e.g.,

AUX :ON).

Switching the rear output setting

This unit’s rear output (rear speaker leads out-

put and RCA rear output) can be used for full-

range speaker or subwoofer connection. If you

switch the rear output setting to the subwoofer,

you can connect a rear speaker lead directly to a

subwoofer without using an auxiliary amp.

• If you connect a subwoofer to the rear output,

set the output setting to subwoofer.

Switching the dimmer setting

To prevent the display from being too bright at

night, the display is automatically dimmed

when the car’s headlights are turned on. You

can switch dimmer on or off.

Press FUNCTION to select DIMMER.

Press FUNCTION repeatedly until DIMMER

appears in the display.

• Even if you change this setting, there is no

output unless you switch the subwoofer output

on (refer to Using subwoofer output on page 32).

• Both rear speaker leads output and RCA rear

output are switched simultaneously in this set-

ting.

Select DIMMER on or off with 5/∞.

Pressing 5/∞ will switch DIMMER between on

and off and that status will be displayed (e.g.,

DIMMER :ON).

Press FUNCTION to select the rear output

setting mode.

Press FUNCTION repeatedly until FRT+REAR

appears in the display.

• If the rear output setting has been set to the

subwoofer then FRT+S/W will be displayed.

Select full-range speaker or subwoofer

with 2/3.

Pressing 2/3 will switch between FRT+REAR

(full-range speaker) and FRT+S/W (subwoofer)

and that status will be displayed.

<CRD3539-A>35

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:44 PM Page 36

Section

Other Functions

Move the cursor to the last position by

Using the AUX source

pressing 3 after entering the title.

When you press 3 one more time, the entered

title is stored in memory.

An IP-BUS-RCA Interconnector such as the

CD-RB20 or CD-RB10 (sold separately) lets you

connect this unit to auxiliary equipment featur-

ing RCA output. For more details, refer to the

IP-BUS-RCA Interconnector owner‘s manual.

Press BAND/ESC to return to the playback

display.

Selecting AUX as the source

Cellular telephone muting

Press SOURCE to select AUX as the source.

Press SOURCE until AUX appears in the display.

• If the auxiliary setting is not switched on, AUX

cannot be selected. For more details, see

Switching the auxiliary setting on page 35.

Sound from this unit is muted automatically

when a call is made or received using a con-

nected cellular telephone.

• The sound is turned off, MUTE is displayed

and no audio adjustments, except volume con-

trol, are possible. Operation returns to normal

when the phone call is ended.

Setting the AUX title

The title displayed for the AUX source can be

changed.

After you have selected AUX as the source,

press FUNCTION and hold until TITLE IN

appears in the display.

Press 5 or ∞ to select a letter of the alpha-

bet.

Each press of 5 will display a letter of the alpha-

bet in A B C ... X Y Z, numbers and symbols in 1 2

3 ... @ # < order. Each press of ∞ will display a

letter in the reverse order, such as Z Y X ... C B A

order.

Press 3 to move the cursor to the next

character position.

When the letter you want is displayed, press 3

to move the cursor to the next position and then

select the next letter. Press 2 to move back-

wards in the display.

<C_DR_oD_w3_n5_lo3_ad9-_frA_om>3_W6_{ww.Somanuals.com. All Manuals Search And Download.}

CRD3539A_Eng 9/21/01 4:44 PM Page 37

Section

Additional Information

Cassette tapes

Music search and repeat

functions

• A loose, torn or warped label on a cassette

tape can jam the cassette player. Do not use

cassette tapes with loose, torn or warped

labels.

• Cassette tapes longer than C-90 (90-minute

tapes) can cause the tape to jam in the cas-

sette player. Do not use tapes longer than

C-90.

Music search and repeat functions may not

work with these tapes:

• A tape with a gap of 4 seconds or less

between songs

• A tape containing dialog or other non-musical

content, with pauses lasting 4 seconds or

longer

• Cassette tapes exposed to high temperatures

may warp and jam the cassette player. Keep

cassettes out of direct sunlight or places

where there are high temperatures.

• A tape with an extremely quiet passage in the

music lasting for 4 seconds or longer

• Store unused tapes in a tape case where there

is no danger of them becoming loose, dirty or

dusty.

Cleaning the playback head

If the head becomes dirty, the sound quality will

get bad and there will be sound dropouts and

other problems. If you have any of these prob-

lems the head may need cleaning.

<CRD3539-A>37

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:44 PM Page 38

Section

Additional Information

Specifications

Tone controls

(Bass) .......................... Frequency:

40/63/100/160 Hz

Level: 12 dB

(Treble) ......................... Frequency:

General

Power source ...................... 14.4 V DC (10.8 – 15.1 V

allowable)

2.5k/4k/6.3k/10k Hz

Level: 12 dB

Grounding system .............. Negative type

Max. current consumption

............................................. 10.0 A

Subwoofer output

Frequency .................... 50/80/125 Hz

Slope ........................... –12 dB/oct.

Level ............................ 12 dB

Dimensions (W × H × D):

Mounting size ............. 178 × 50 × 157 mm

Nose ............................ 188 × 58 × 19 mm

Weight ................................. 1.4 kg

Cassette player

Tape ..................................... Compact cassette tape

(C-30 – C-90)

Tape speed .......................... 4.8 cm/sec

Fast forward/rewinding time

............................................. Approx. 100 sec (C-60)

Wow & flutter ...................... 0.09% (WRMS)

Frequency response:

Metal ........................... 30 – 16,000 Hz ( 3 dB)

Stereo separation ............... 45 dB

Signal-to-noise ratio ...........

Audio/DSP

Maximum power output ..... 50 W × 4, 50 W × 2/4 Ω +

70 W × 1/2 Ω

(for subwoofer)

Continuous power output

............................................. 27 W × 4 (DIN45324, +B =

14.4 V)

Load impedance ................. 4 Ω (4 – 8 Ω [2 Ω for 1 ch]

allowable)

Preout maximum output level/output impedance

............................................. 2.2 V/1 kΩ

Equalizer (3-Band Parametric Equalizer)

(Low) ............................ Frequency:

40/80/100/160 Hz

Metal:

Dolby NR OUT ..... 61 dB (IEC-A network)

FM tuner

Frequency range ................. 65 – 74 MHz

87.5 – 108 MHz

Usable sensitivity ............... 10 dBf (0.9 µV/75 Ω, mono,

S/N: 30 dB)

50 dB quieting sensitivity ... 15 dBf (1.5 µV/75 Ω, mono)

Signal-to-noise ratio ........... 70 dB (IEC-A network)

Distortion ............................ 0.3% (at 65 dBf, 1 kHz,

stereo)

Frequency response ........... 30 – 15,000 Hz ( 3 dB)

Stereo separation ............... 40 dB (at 65 dBf, 1 kHz)

Q Factor:

0.35/0.59/0.95/1.15

(+6 dB when boosted)

Level: 12 dB

(Mid) ............................ Frequency:

200/500/1k/2k Hz

Q Factor:

0.35/0.59/0.95/1.15

(+6 dB when boosted)

Level: 12 dB

MW tuner

(High) .......................... Frequency:

3.15k/8k/10k/12.5k Hz

Frequency range ................. 531 – 1,602 kHz (9 kHz)

Usable sensitivity ............... 18 µV (S/N: 20 dB)

Selectivity ............................ 50 dB ( 9 kHz)

Q Factor:

0.35/0.59/0.95/1.15

(+6 dB when boosted)

Level: 12 dB

LW tuner

Loudness contour

Frequency range ................. 153 – 281 kHz

Usable sensitivity ............... 30 µV (S/N: 20 dB)

Selectivity ............................ 50 dB ( 9 kHz)

(Low) ............................ +3.5 dB (100 Hz), +3 dB

(10 kHz)

(Mid) ............................ +10 dB (100 Hz), +6.5 dB

(10 kHz)

(High) .......................... +11 dB (100 Hz), +11 dB

(10 kHz)

Note

• Specifications and the design are subject to

possible modifications without notice due to

improvements.

(volume: –30 dB)

<C_DR_oD_w3_n5_lo3_ad9-_frA_om>3_W8_{ww.Somanuals.com. All Manuals Search And Download.}

CRD3539A_Eng 9/21/01 4:44 PM Page 39

<CRD3539-A>39

Download from Www.Somanuals.com. All Manuals Search And Download.

CRD3539A_Eng 9/21/01 4:44 PM Page 80

PIONEER CORPORATION

4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN

PIONEER ELECTRONICS (USA) INC.

P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.

TEL: (800) 421-1404

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium

TEL: (0) 3/570.05.11

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundary Road, Braeside, Victoria 3195, Australia

TEL: (03) 9586-6300

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R OP2, Canada

TEL: (905) 479-4411

Published by Pioneer Corporation.

PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.

San Lorenzo 1009 3er. Piso Desp. 302

Col. Del Valle Mexico, D.F. C.P. 03100

Publication de Pioneer Corporation.

Tous droits de reproduction et de traduction

réservés.

TEL: 5-688-52-90

Printed in Thailand

Imprimé en Thaïlande

<CRD3539-A/N> EE

<C_DR_oD_w3_n5_lo3_ad9-_frA_om>8_W0_{ww.Somanuals.com. All Manuals Search And Download.}

ENG/MASTER COVER 01

Pelco Home Security System cc4700 2 User Manual
Pentax Digital Camera Optio 555 User Manual
Philips Computer Monitor MB4010T001 User Manual
Philips DVD Player PET710 User Manual
Phonetics Network Card SCADA 3000 User Manual
Planet Technology Switch 10 100 1000Mbps Gigabit Ethernet Web manageable Switch User Manual
Poulan Tiller 184865 User Manual
Poulan Trimmer BC3100 User Manual
Praktica Digital Camera D00451 User Manual
PYLE Audio IP Phone 33X User Manual