Pioneer Car Stereo System AVH P5200BT User Manual

When the ignition switch is turned OFF

after the LCD panel has been closed, turn-

ing the ignition switch ON again (or turning

it to ACC) will not open the LCD panel. In

this case, press OPEN/CLOSE to open the

LCD panel.

When closing the LCD panel, check to

make sure that it has closed completely. If

the LCD panel has stopped halfway, leaving

it like this could result in damage.

Touch TILT.

Touch the TILT keys to adjust the LCD

panel to an easily viewable angle.

The LCD panel angle continues changing as

long as you touch and hold the TILT keys.

CAUTION

Keep hands and fingers clear of the unit when

opening, closing, or adjusting the LCD panel. Be

especially cautious of children’s hands and fin-

gers.

Laying the panel down.

Press OPEN/CLOSE to open the LCD

panel.

Returning the panel to the upright

position.

To close the LCD panel, press OPEN/CLOSE

again.

As the set angle is saved, the LCD panel will

automatically be adjusted to the same position

the next time the LCD panel is opened.

Adjusting the LCD panel angle

Important

If you can hear the LCD panel knocking

against your vehicle’s console or dashboard,

touch the TILT keys to move the LCD panel a

little forward.

When adjusting the LCD panel angle, be sure

to touch the TILT keys. Forcibly adjusting the

LCD panel by hand may damage it.

Turning the LCD panel horizontally

When the LCD panel is upright and hinders

the operation of the air conditioner, the panel

can be turned horizontally temporarily.

Press and hold OPEN/CLOSE to turn the

LCD panel horizontally.

To return to the original position, press and

hold OPEN/CLOSE again.

The LCD panel returns to the original position

automatically, indicated with a beeping sound 10

seconds after operation.

Ejecting a disc

Press h (eject).

Eject a disc

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Basic Operations

Ejecting an SD

Removing the front panel

Refer to Removing the front panel on page 9.

Push an SD.

Ejecting an SD

Setting the clock

Switch to Clock Adjustment display.

Select the item to set.

Touch a or b to set the correct date

and time.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Tuner

Introduction of tuner

operations

Manual tuning (step by step) using the buttons

Press c or d (TRACK).

Seek tuning using the buttons

Press and hold c or d (TRACK).

Wed 28 may

12:45 PM

Local

Radio

Note

Abcdeabcdeabcde

Listening AM radio while an iPod is charged from

this unit may generate noise. In this case, discon-

nect the iPod from this unit.

87.5

MHz

P.ch

Band:

FM1

87.5 MHz

1 Touch panel keys

Turning local seek tuning on

and off.

Refer to T u ning in to strong

signals on page 33.

Switching the equalizer

curves.

Refer to Using the equalizer

on page 55.

Touch and hold for more

than two seconds to turn the

auto-equalizer on or off.

Refer to Using the auto-

equalizer on page 56.

Displaying the preset chan-

nel list.

Refer to Storing and recalling

Refer to Storing the strongest

Refer to Storing and recalling

Band:

Selecting a band (FM1, FM2,

FM3 for FM or AM).

Recalling radio station fre-

quencies assigned to preset

tuning keys.

Refer to Storing and recalling

Saving song information

(tag) from the broadcasting

station to your iPod.

Refer to Using i T u nes tagging

on page 34.

TAG

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Playing moving images

1 Touch panel keys

Introduction of video

playback operations

Selecting the repeat range.

Refer to Repeating playback

guage during playback (Multi-

You can view DVD/DVD-R/DVD-RW/CD/CD-R/

CD-RW/USB/SD/iPod.

During playback, touch the

point at which you want to re-

sume playback the next time

the disc is loaded.

Refer to Resume playback

(Bookmark) on page 37.

Wed 28 may

12:45 PM

01 L+R

Abcdeabcdeabcdeabcdeab

Changing the screen mode.

Refer to Changing the wide

screen mode on page 41.

01:45

-02:45

Switching the equalizer

curves.

Refer to Using the equalizer

on page 55.

Return

Touch and hold for more

than two seconds to turn the

auto-equalizer on or off.

Refer to Using the auto-

equalizer on page 56.

DVD video

Return

Switching between audio

languages during playback.

Refer to Changing audio lan-

audio) on page 38.

Video CD

Switching between subtitle

languages during playback.

Refer to Changing the subti-

tle language during playback

(Multi-subtitle) on page 38.

Wed 28 may

12:45 PM

S.Rtrv

iPod

ALL

Songs

Abcdeabcdeabcdeabcdeab

Switching among viewing

angles during playback.

Refer to Changing the view-

ing angle during playback

(Multi-angle) on page 39.

2067/12345

01:45

-02:45

iPod video

Switching the audio output,

when playing video discs re-

corded with LPCM audio.

Refer to Selecting audio out-

put on page 39.

01:45

-02:45

Switching between stereo

and monaural audio output,

when playing Video CD

discs.

When playing a disc containing a mixture

of various media file types

If an iPod with video capabilities is con-

nected to this unit using an interface cable

such as the CD-IU50V (sold separately), you

can enjoy the video contents of the iPod as

an iPod source.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Playing moving images

Starting the search function.

Refer to Searching for the part

you want to play on page 38.

Refer to Selecting files from

the file name list on page 40.

Displaying iPod menus.

Refer to Playing videos from

your iPod on page 36 and

Browsing for a video/music

on the iPod on page 36.

Speeding down the playback

speed in four steps, during

slow motion playback on

Video CD.

Returning to the specified

scene to which the DVD cur-

rently being played has been

preprogrammed to return.

Refer to Return to the speci-

fied scene on page 39.

Return

Returning to normal play-

back during paused, slow

motion, or frame-by-frame

playback.

Playing the video on your

iPod in a random order.

Refer to Random play (shuf-

fle) on page 35.

Switching the Advanced

sound retriever function set-

ting when playing a video on

your iPod.

Refer to Using advanced

sound retriever on page 40.

Pausing playback

Displaying the DVD menu

during DVD playback.

Refer to Operating the DVD

menu on page 35.

Conducting operation from

your iPod and listening to it

using your car’s speaker’s.

Refer to Operating this unit ’s

iPod function from your iPod

on page 35.

Returning to the top menu

during DVD playback.

Stopping playback.

Stopping playback at the

point set in Resume play-

back.

Touch one more time to stop

playback completely.

Refer to Resume playback

(Bookmark) on page 37.

Switching between media

file types to play on DVD/CD/

USB/SD.

Refer to Switching the media

file type on page 34.

Displaying arrow keys to op-

erate the DVD menu.

Refer to Using the arrow keys

on page 35.

Skipping to another title.

Selecting a folder during

DivX file playback.

Moving ahead one frame at a

time during playback.

Refer to Frame-by-frame play-

back on page 37.

Touch and hold for more

than two seconds to slow

down playback speed.

Speeding up the playback

speed in four steps during

slow motion playback on

DVD video/Video CD.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Playing moving images

tails, refer to Resume playback (Bookmark) on

page 37.

Some operations may not be available while

watching a DVD due to the programming of

the disc. In such cases, the icon appears

on the screen.

To ensure proper operation, connect the dock

connector cable from the iPod directly to this

unit.

If the ignition switch is set to ACC or ON, the

iPod battery will be charged while connected.

However, the iPod battery is not charged when

you select an SD as the source.

Playing back videos

Insert the disc into the disc loading slot with the

label side up.

Playback will automatically start.

If you are playing a DVD or Video CD, a menu

may appear. Refer to Operating the DVD menu on

page 35 and PBC playback on page 39.

When the automatic playback function is on, the

unit will skip the DVD menu and automatically

start playback from the first chapter of the first

title. Refer to Automatic playback of DVDs on page

61.

If a disc has already been inserted, press SRC/

OFF or touch the source icon to select the source.

When the source icon is not displayed, it can be

displayed by touching the screen.

While the iPod is connected to this unit, the

iPod cannot be turned on or off.

However, the iPod can be turned on or off

when you select an SD as the source.

Disconnect headphones from the iPod before

connecting to this unit.

Depending on the iPod model and the amount of

data stored in the iPod, it may take some time for

playback to begin.

Use the touch panel keys to select the iPod after

connecting it to this unit.

No Device is displayed when disconnecting the

iPod.

If a message is displayed after loading a disc con-

taining DivX VOD content, touch Play.

Refer to Playing DivX^ÒVOD content on page 40.

Ejecting a disc

Refer to Ejecting a disc on page 14 or Ejecting an

SD on page 15.

Selecting a chapter using the buttons

Press c or d (TRACK).

Fast forwarding or reversing using the buttons

Press and hold c or d (TRACK).

Fast forward/fast rewind may not always be possi-

ble on some discs. In such cases, normal play-

back will automatically resume.

Notes

This DVD player can play back a DivX file re-

corded on CD-R/RW or DVD-R/RW. (Please

see the following section for files that can be

played back. Refer to page 84.)

Do not insert anything other than a DVD (-R/-

RW) or CD (-R/-RW) into the disc loading slot.

If the bookmark function is on, DVD playback

resumes from the selected point. For more de-

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Playing audio

Introduction of sound

playback operations

You can listen to DVD-R/DVD-RW/CD/CD-R/

CD-RW/USB/SD/iPod sound files.

Switching the equalizer

curves.

Refer to Using the equali-

zer on page 55.

Touch and hold for more

than two seconds to turn

the auto-equalizer on or

off.

1 2

3 4

Wed 28 may

12:45 PM

Refer to Using the auto-

equalizer on page 56.

S.Rtrv

ROM

ALL

Songs

Abcdeabcdeabcdeabcdeab

Displaying a list of track

titles/file names to select

songs on a CD.

125

Refer to Selecting tracks

from the track title list on

page 39.

01:45

-02:45

Displaying the file name

list to select the files.

Refer to Selecting files

from the file name list on

page 40.

Displaying iPod menus.

Refer to Browsing for a

video/music on the iPod

playing song (Link Search)

1 a b 3 4 i

Wed 28 may

S.Rtrv

iPod

12:45 PM

ALL

Songs

Abcdeabcdeabcdeabcdeab

2067/12345

Pausing and starting

playback

01:45

-02:45

c d e

Switching the text infor-

mation to display on this

unit when playing MP3/

WMA/AAC files.

iPod audio

You can control an iPod with this unit by using

a cable such as the CD-IU50 (sold separately).

1 Touch panel keys

Selecting a folder.

Selecting the repeat

range.

Refer to Repeating play-

back on page 36.

Switching between

media file types on a

DVD/CD/USB/SD.

Refer to Switching the

media file type on page

34.

Playing songs in random

order.

Refer to Random play

(shuffle) on page 35.

Switching the Advanced

sound retriever function

setting when playing

Playing songs on the

iPod in random order.

Refer to Random play

(shuffle) on page 35.

audio.

Refer to Using advanced

sound retriever on page

40.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Playing audio

Changing the speed of

Playing back sound

audiobook playback on

the iPod.

Refer to Changing audio-

book speed on page 40.

Insert the disc into the disc loading slot with the

label side up.

Playback will automatically start.

If a disc has already been inserted, press SRC/

OFF or touch the source icon to select the source.

When the source icon is not displayed, it can be

displayed by touching the screen.

Disconnect headphones from the iPod before

connecting to this unit.

Depending on the iPod model and the amount of

data stored in the iPod, it may take some time for

playback to begin.

Switching to Link Search

mode to play songs re-

lated to the currently

playing song on the iPod.

Refer to Displaying lists

related to the currently

on page 40.

Use the touch panel keys to select the iPod after

connecting it to this unit.

No Device is displayed when disconnecting the

iPod.

Playing all songs on the

iPod in random order.

Refer to Playing all songs

in random order (shuffle

all) on page 36.

Ejecting a disc

Refer to Ejecting a disc on page 14 or Ejecting an

SD on page 15.

Conducting operation

from your iPod and listen-

ing to it using your car’s

speaker’s.

Refer to Operating this

unit ’s iPod function from

your iPod on page 35.

Selecting a track using the buttons

Press c or d (TRACK).

Fast forwarding or reversing using the buttons

Press and hold c or d (TRACK).

2 Text information

Notes

Displaying the Songs list

on the iPod.

Refer to Searching for a

video/music by category

When playing back files recorded as VBR

(variable bit rate) files, the play time will not be

correctly displayed if fast forward or reverse

operations are used.

To ensure proper operation, connect the dock

connector cable from the iPod directly to this

unit.

If the ignition switch is set to ACC or ON, the

iPod battery will be charged while connected.

However, the iPod battery is not charged when

you select an SD as the source.

While the iPod is connected to this unit, the

iPod cannot be turned on or off.

Displaying the Artists list

on the iPod.

Refer to Searching for a

video/music by category

Displaying the Albums

list on the iPod.

Refer to Searching for a

video/music by category

rently playing song (Link Search) on page 40.

3 Artwork display

However, the iPod can be turned on or off

when you select an SD as the source.

If the characters recorded on the disc are not

compatible with this unit, those characters

will not be displayed.

Text information may not be correctly dis-

played depending on the recorded environ-

ment.

Starting Album Link Play on your iPod

when you touch the artwork display.

Refer to Displaying lists related to the cur-

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Playing audio

USB storage device that can be charged via

USB will be recharged when plugged in and

the ignition switch is set to ACC or ON.

However, the USB storage device that can be

charged via USB will not be recharged when

you select an SD as the source.

Disconnect the USB portable audio player/

USB memory when you are done using it.

When you select Clock or Speana on Select-

ing the background display on page 68, the art-

work is not displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Playing still images

Introduction of still image

playback operations

You can view still images saved in CD-R/CD-

RW/USB/SD.

Displaying the file name

list to select the files.

Refer to Selecting files from

the file name list on page

40.

1 2 3

Starting or pausing the sli-

deshow.

Wed 28 may

12:45 PM

Photo

Off

Full

Abcdeabcdeabcde

Rotating the displayed pic-

ture 90° clockwise

Capture

Capturing an image in

JPEG files.

Refer to Capture an image

in JPEG files on page 41.

6 7

01:45

-02:45

Selecting a folder.

When playing a disc containing a mixture

of various media file types

Switching between media

file types.

Refer to Switching the

media file type on page 34.

When loading a CD-R/RW/USB/SD containing

JPEG picture files, this unit starts a slideshow

from the first folder/picture on the disc/device.

The player displays the pictures in each folder

in alphabetical order.

The table below shows the controls for viewing

a slideshow.

1 Touch panel keys

Playing still images

Insert the disc into the disc loading slot with the

label side up.

Playback will automatically start.

If a disc has already been inserted, press SRC/

OFF or touch the source icon to select the source.

When the source icon is not displayed, it can be

displayed by touching the screen.

Touch any of the following touch panel keys to

select the function to be adjusted.

Ejecting a disc

Refer to Ejecting a disc on page 14 or Ejecting an

SD on page 15.

Selecting the repeat range.

Refer to Repeating playback

in JPEG files on page 41.

Playing files in a random

order.

Refer to Random play (shuf-

fle) on page 35.

Selecting a file using the buttons

Press c or d (TRACK).

Fast file searching

Press and hold c or d (TRACK).

Changing the screen mode

Refer to Changing the wide

screen mode on page 41.

You can search 10 JPEG files at a time.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Playing still images

Notes

This unit can play back a JPEG file recorded

on CD-R/RW/ROM/SD/USB storage device.

(Please see the following section for files that

can be played back. Refer to page 84.)

Files are played back in file number order and

folders are skipped if they contain no files. (If

folder 01 (ROOT) contains no files, playback

commences with folder 02.)

Selecting a folder.

Selecting a file.

Starting or pausing the sli-

deshow.

Introduction of still image

playback as a slideshow

operations

You can view still images saved in CD-R/CD-

RW/USB/SD as a slideshow when listening to

another source.

Rotating the displayed pic-

ture 90° clockwise

Capturing an image in

JPEG files.

Refer to Capture an image

1 2 3

Off

Full

Start slideshow when listening to an-

other source.

Refer to Common operations for menu set-

tings/lists on page 13.

Capture

Displaying still images as a slide

show.

7 8

The table below shows the controls for viewing

a slideshow.

Select the device containing the files

1 Touch panel keys

that you want to display.

Touch any of the following touch panel keys to

select the function to be adjusted.

Disc – Built-in DVD player

USB – USB

SD – SD memory card

Selecting the repeat range.

To cancel searching, touch Cancel.

Refer to Repeating playback

tering phone number on page

Notes

Playing files in a random

order.

Refer to Random play (shuf-

fle) on page 35.

When the USB or SD source is selected, this

unit cannot view still images on USB/SD as a

slideshow.

When MW/LW band is selected, this unit can-

not view still images as a slideshow.

Changing the screen mode

Refer to Changing the wide

screen mode on page 41.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Bluetooth Telephone

Be sure to park your vehicle in a safe place

and apply the parking brake when performing

this operation.

Introduction of Bluetooth

telephone operations

1 Incoming call notice

Indicates that an incoming call has been re-

ceived and has not been checked yet.

Wed 28 may

Radio

12:45 PM

ABCDEHGHI 01

012345678901

Not displayed for calls made when your

cellular phone is disconnected from this

unit.

Abcdeabcdeabcde

P.CH

Off

2 Touch panel keys

Band:

FM1

87.5 MHz

Switching the mode to enter

the phone number directly.

Refer to Making a call by en-

49.

4 5 7

1 2 6 3

Telephone standby display

Switching to the call history

list.

Refer to Using the missed, re-

ceived and dialed call lists on

page 48.

Wed 28 may

12:45 PM

ABCDEHGHI 01

012345678901

Switching to the phone book

mode.

Off

Refer to Calling a number in

the phone book on page 47.

Refer to Selecting a number

by alphabet search mode on

page 47.

8 a 9 b

When switching to the entering

phone number mode

Turning automatic answering

on or off.

Refer to Setting automatic an-

swering on page 49.

You can use Bluetooth telephone (AVH-P5200BT

only).

Turning the ring tone for in-

coming calls on or off.

Refer to Switching the ring

tone on page 49.

Important

Since this unit is on standby to connect with

your cellular phone via Bluetooth wireless

technology, using it without the engine run-

ning can drain the battery power.

Advanced operations that require attention

such as dialing numbers on the monitor, etc.,

are prohibited while driving. Park your vehicle

in a safe place when using these advanced

operations.

Displaying the preset dial

screen.

Refer to Using the preset dial

lists on page 49.

Displaying the Bluetooth

connection menu.

Refer to the instructions

from page 50 to page 52.

Turning private mode on or

off.

Refer to Setting the private

mode on page 50.

Operations available may be limited depend-

ing on the cellular phone connected to this

unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Bluetooth Telephone

Adjusting the other party’s

listening volume.

Refer to Adjusting the other

party ’s listening volume on

page 49.

Connection

First, you need to connect a Bluetooth telephone

to this unit.

For detailed instructions on connecting your

phone to this unit via Bluetooth wireless technol-

ogy, see following section. Using a Bluetooth de-

vice to pair on page 51 and Pairing from this unit

on page 50.

Accepting an incoming call.

Making a phone call, when

selecting a phone number.

Switching between callers on

hold.

You may also need to enter a PIN code into

this unit. If your telephone requires a PIN

code to establish a connection, look for the

code on the telephone or in its accompanying

documentation. Refer to Entering PIN code for

Bluetooth wireless connection on page 52.

Ending a call.

Rejecting an incoming call.

Canceling call waiting.

Volume adjustment

Accepting an incoming call

Ending a call

Adjust the earpiece volume of your cellular phone

to your preference. The unit will record the ad-

justed volume level as the default setting.

Press MUTE/

The volume of the caller’s voice and ring tone

may vary depending on the type of cellular

phone.

If there is a large volume difference between

the ring tone and caller’s voice, the overall vo-

lume level may become unstable.

Make sure to adjust the volume to a proper

level before disconnecting the cellular phone

from the unit. If the volume is muted (zero

level) on your cellular phone, the volume level

of your cellular phone remains muted even

after the cellular phone is disconnected.

Notes

Private mode can only be operated while you

are talking on the phone.

To end the call, both you and the other caller

must hang up your phones.

Setting up for hands-free phoning

Before you can use the hands-free phoning

function you must set up the unit for use with

your cellular phone. This entails establishing a

Bluetooth wireless connection between this

unit and your phone, registering your phone

with this unit, and adjusting the volume level.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

XM/SIRIUS tuner

these points. For all other information on

using the SIRIUS tuner, please refer to the SIR-

IUS operation manual.

Introduction of XM/SIRIUS

tuner operations

With this unit, you can operate one addi-

tional function: XM/SIRIUS channel direct

selection. Refer to Selecting an XM/SIRIUS

channel directly on page 43.

1 2 3

Mode

All CH

Wed 28 may

12:45 PM

Memo Team

SIRIUS

Off

Abcdeabcdeabcde

1 Touch panel keys

CH183

P.CH

Selecting a channel by num-

ber or category.

Refer to Switching the XM/

SIRIUS channel selection

mode on page 42.

Mode

All CH

Band:

CH183

Mode

category

Display the iPod menus.

When Folder is selected, it is not possible

to play back a subfolder of that folder.

Refer to Playing moving images on page 17.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Detailed instructions

To refine the search with a different letter,

Refer to Playing audio on page 20.

touch Cancel.

Touch one of the categories in which

Touch the title of the list that you want

you want to search for a video/music.

to play.

Video Playlists (video playlists)

Movies (movies)

Music Videos (music videos)

Video Podcasts (video podcasts)

TV Shows (TV shows)

Playlists (playlists)

Artists (artists)

Albums (albums)

Songs (songs)

Podcasts (podcasts)

Genres (genres)

Repeat this operation until you find the de-

sired song/video.

Start playback of the selected list.

Starting playback of the selected list.

Composers (composers)

Audiobooks (audiobooks)

Resume playback (Bookmark)

(Function for DVD video)

Touch the title of the list that you want

By using the Bookmark function, you can re-

sume playback from a selected scene the next

time the disc is loaded.

to play.

Repeat this operation until you find the de-

sired video/music.

The selected scene will be bookmarked so that

playback resumes from that point next time.

Start playback of the selected list.

To clear the bookmark on a disc, touch and

hold the button during playback.

The oldest bookmark is replaced by the

new one.

Starting playback of the selected list.

Searching the list by alphabet

(Function for iPod)

Frame-by-frame playback

(Function for DVD video/video CD)

Select a category.

Refer to Searching for a video/music by cate-

gory on the previous page.

Images during frame-by-frame playback may

be unclear for some discs.

Switch to alphabet search mode.

Slow motion playback

Switching to alphabet search mode.

Notes

There is no sound during slow motion play-

back.

Images during slow motion playback may be

unclear for some discs.

Reverse slow motion playback is not

available.

Alphabet search mode is displayed.

Touch the first letter of the title of the

video/song you are looking for.

While searching, touch panel key operation is

not available.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Detailed instructions

Searching for the part you

want to play

You can use the search function to find the

part you want to play.

For DVD videos, you can select Title (title),

Chapter (chapter) or 10key (numeric keypad).

For video CDs, you can select Track(track) or

10key(numeric keypad).

Notes

With some DVDs, switching between lan-

guages/audio systems may only be possible

using a menu display.

You can also switch between languages/audio

systems using Video setup menu. For details,

refer to Setting the audio language on page 58.

Only digital output of DTS audio is possible. If

the unit’s optical digital outputs are not con-

nected, select an audio setting other than

DTS.

Depending on the setting, the video may not

be played back with the audio system used to

record the DVD.

You will return to normal playback if you

change the Audio during fast forward/fast re-

wind, pause or slow motion playback.

Chapter search is not available when disc

playback is stopped.

This function cannot be operated during

Video CD playback featuring PBC (playback

control).

Start the search function.

Refer to Playing moving images on page 17.

Touch the desired search option (e.g.,

Chapter).

Changing the subtitle

language during playback

(Multi-subtitle)

With DVDs/DivX files featuring multi-subtitle

recordings, you can switch between subtitle

languages during playback.

ber.

Touch 0 to 9 to input the desired num-

To cancel the entered numbers, touch C.

Start playback from the selected part.

Registering the numbers.

Notes

This starts playback from the selected part.

With some DVDs, switching between subtitle

languages may only be possible using a menu

display.

You can also switch between subtitle lan-

guages using Video setup menu. For details,

refer to Setting the subtitle language on page

58.

Note

With discs featuring a menu, you can also use

the DVD menu to make your selection.

Refer to Playing moving images on page 17.

You will return to normal playback if you

change the Subtitle during fast forward/fast

rewind, pause or slow motion playback.

Changing audio language

during playback (Multi-audio)

With DVDs/DivX files that provides audio play-

back in different languages and different

audio systems (Dolby Digital, DTS, etc.), you

can switch between languages/audio systems

during playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Detailed instructions

Changing the viewing angle

during playback (Multi-angle)

With DVDs featuring multi-angle (scenes shot

from multiple angles) recordings, you can

switch among viewing angles during play-

back.

PBC playback

(Function for Video CDs)

During playback of Video CDs featuring PBC

(Playback Control), PBC ON is displayed.

Start the search function.

Refer to Playing moving images on page 17.

During playback of a scene shot from mul-

tiple angles, the angle icon is displayed.

Use the Video setup menu to turn the

angle icon display on or off. For details,

refer to Setting the multi-angle DVD display

on page 59.

Touch 10key to display the numeric

keypad.

Touch 0 to 9 corresponding to a menu

number.

Start playback from the selected part.

Note

You will return to normal playback if you change

the viewing angle during fast forward/fast rewind,

pause or slow motion playback.

Registering the numbers.

Notes

You can display the menu by touching Return

during PBC playback. For details, refer to the

instructions provided with the disc.

PBC playback of a Video CD cannot be can-

celed.

During playback of Video CDs featuring PBC

(Playback Control), you cannot select the re-

peat play range or use the search function.

Return to the specified scene

(Function for DVD video)

This function cannot be used if a specified

scene has not been preprogrammed on the

DVD disc.

Selecting audio output

When playing DVD video discs recorded with

LPCM audio, you can switch the audio output.

When playing video CDs, you can switch be-

tween stereo and monaural audio output.

Selecting tracks from the

track title list

You can select tracks to playback using the

track title list which is a list of the tracks re-

corded on a disc.

This function is not available when disc

playback is stopped.

Display the track title list.

L+R – left and right

Left – left

Right – right

Refer to Playing audio on page 20.

Touch your favorite track title.

Mix – mixing left and right

Playback begins.

You may not be able to select or use this func-

tion depending on the disc and the playback

location.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Detailed instructions

Selecting files from the file

name list

Displaying lists related to

the currently playing song

(Link Search)

(Function for USB/SD/DivX)

File name list is a list of file names (or folder

names) from which you can select a file (or

folder) to play back.

(Function for iPod)

Start Link Play.

Refer to Introduction of sound playback opera-

tions on page 20.

Display the file (or folder) name list.

Refer to Playing audio on page 20.

VOD registration code on page 61.

Touch one of the categories in which

you want to play.

Artist – Displays an album list of the artist

currently being played.

Album – Displays a song list from the

album currently being played.

Genre – Displays an album list from the

genre currently being played.

Touch your favorite file (or folder)

name.

When you have selected a folder, a list of the

names of the files (or the folders) in it can be

viewed. Repeat this operation to select the de-

sired file name.

To cancel searching, touch Cancel.

If folder 01 (ROOT) contains no files, playback

commences with folder 02.

Touch the title of the list that you want

to play.

Start playback of the selected list.

Starting playback of the selected list.

If no related albums/songs are found,

Not Found is displayed.

Using advanced sound

retriever

Automatically enhances compressed audio

and restores rich sound.

Playing DivX VOD content

Some DivX VOD (video on demand) content

may only be playable a fixed number of times.

When you load a disc containing this type of

content, the remaining number of times it can

be played is shown on-screen. You can then

decide whether or not to play the disc.

Off —

—

is more effective than

Changing audiobook speed

(Function for iPod)

If there is no limit to the number of times

the DivX VOD content can be viewed, then

you may load the disc into your player and

play the content as often as you like, and

no message will be displayed.

You can confirm the number of times that

the content can be played by checking the

number displayed after Remaining Views:.

– Playback at a speed faster than

normal

– Playback at normal speed

– Playback at a speed slower than nor-

mal

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Detailed instructions

displayed. When the process is finished,

Image saved is displayed.

Important

In order to play DivX VOD content on this unit,

you first need to register the unit with your

DivX VOD content provider. For details on your

registration code, refer to Displaying the DivX^Ò

DivX VOD content is protected by a DRM (Di-

gital Rights Management) system. This re-

stricts playback of content to specific,

registered devices.

To cancel the storage process, touch No.

Changing the wide screen

mode

You can select a desired mode for enlarging a

4:3 picture to a 16:9 picture.

Display the screen mode.

If a message is displayed after loading

Refer to Introduction of video playback opera-

tions on page 17.

a slideshow operations on page 24.

Refer to Introduction of still image playback as

a disc containing DivX VOD content, touch

Play.

Playback of the DivX VOD content will start.

To skip to the next file, touch Next Play.

If you do not want to play the DivX VOD con-

tent, touch Stop.

Touch the desired wide mode setting.

Full (full screen)

Capture an image in JPEG files

You can capture image data and use it as wall-

paper. Images can be stored and recalled ea-

sily in this unit.

The 4:3 picture is enlarged in the horizontal direc-

tion only, giving you a 4:3 TV picture (normal pic-

ture) without any omissions.

Just (just)

Only one image can be stored on this unit.

Old images are overwritten with the new

ones.

The picture is enlarged slightly at the center and

the amount of enlargement increases horizontally

toward the edges of the screen, enabling you to

enjoy a 4:3 picture without sensing any disparity

even when viewing on a wide screen.

Pause the slideshow when the desired

image is displayed.

a slideshow operations on page 24.

Cinema (cinema)

Refer to Introduction of still image playback as

The picture is enlarged by the same proportion as

Full or Zoom in the horizontal direction and by

an intermediate proportion between Full and

Zoom in the vertical direction; ideal for a cinema-

sized picture (wide screen picture) where cap-

tions lie outside the picture.

Capture the image.

a slideshow operations on page 24.

Refer to Introduction of still image playback as

Zoom (zoom)

The 4:3 picture is enlarged in the same proportion

both vertically and horizontally; ideal for a cinema

sized picture (wide screen picture).

When Do you save this image? is dis-

played, touch Yes.

While storing the image to this unit, Saving

the image Don't switch off the battery. is

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Detailed instructions

Normal (normal)

Select channel category selection

mode.

The 4:3 picture is displayed as it is, giving you no

sense of disparity since its proportions are the

same as that of the normal picture.

Mode All CH (channel number select setting)

—Mode Category (channel category select

setting)

Notes

You cannot operate this function while driving.

Different settings can be stored for each video

source.

Touch a or b to select the desired chan-

nel category.

When a video is viewed in a wide screen mode

that does not match its original aspect ratio, it

may appear different.

Remember that using the wide mode feature

of this system for commercial or public view-

ing purposes may constitute an infringement

on the author’s rights protected by the Copy-

right Law.

Touch c or d on the buttons to select

the desired channel in the selected channel

category.

Selecting a channel from the

XM channel list display

The video image will appear coarser when

viewed in Cinema or Zoom mode.

The list content can be switched so you can

search for the track you want to listen to not

only by the channel name but also by the artist

name or song title.

This function is available for GEX-P920XM.

The channel list shows all the channels

during ALL-CH mode, and the channels in-

cluded in the selected category during

Mode Category mode.

Switching the XM/SIRIUS

channel selection mode

You have two methods for selecting a channel:

by number and by category. When selecting

by number, channels in any category can be

selected. Select by category to narrow your

search down to only channels in a particular

category.

Display the preset channel list.

Switch the channel list mode.

Mode All CH (channel number select setting)

—Mode Category (channel category select

setting)

Switching the channel list mode to

the channel name or the artist

name/song title.

Selecting a SIRIUS channel from

a channel category

Touch the desired channel that you

want to listen to.

Channels are organized into various program

categories, e.g. Rock, Classic, Jazz while lis-

tening to a SIRIUS station. You can specify

channels by selecting the desired category.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Detailed instructions

to a song that matches a song title and its ar-

tist name in the MyMix playlist.

Selecting an XM/SIRIUS

channel directly

You can select an XM/SIRIUS channel directly

by entering the desired channel number.

Store the song title and artist name.

Display the preset channel list.

The song title and artist name of the song you

are listening to are stored, and a confirmation

message appears.

to Deleting a song from the MyMix playlist for XM

To delete a song from the MyMix playlist, refer

Switch to direct input display.

tuner on the next page and Deleting a song from

the MyMix playlist for SIRIUS tuner on the next

ting up a song alert on this page.

Switching to direct input display.

(XM)

The song title and artist name of up to 12 tracks

can be stored. Old tracks will be overwritten

when saving more than 12 tracks.

Touch 0 to 9 to input the desired chan-

nel number.

To cancel the input numbers, touch C.

(Sirius)

Select the XM/SIRIUS channel of the en-

The song title and artist name of up to 10 tracks

can be stored. Old tracks will be overwritten

when saving more than 10 tracks.

tered number.

The XM/SIRIUS channel of the entered num-

ber is selected.

You cannot store the song title or the artist

name when “– – – – – – – –” is displayed for the

title information.

Selecting the XM/SIRIUS channel of

the entered number.

You cannot store song titles or artist names

from channel 000.

Stored titles may not be displayed correctly.

When a song in the MyMix

playlist is broadcast

(XM tuner)

As soon as a song in the MyMix playlist starts

being broadcast on a different station, a mes-

sage is displayed. Touch Yes to switch to that

station, and you can listen to that song.

(SIRIUS tuner)

As soon as a stored song starts being broad-

cast on a different station, a song alert is dis-

played.

Using the MyMix function

The MyMix function allows you to make a

MyMix song playlist. When a song in the

MyMix playlist is being broadcast on a station

other than the one you are listening to, you

will be alerted, and you can tune in to the

other station to listen to that song.

This function is available for GEX-P920XM.

The track itself is NOT downloaded. Only

the song title and artist name are stored.

Making the MyMix playlist

Switching to the other station to lis-

ten to that track.

You can add a song that is being broadcast to

the MyMix playlist. When it is added, the song

title and its artist name are stored to this unit.

The MyMix function will start when you listen

Not tuning in to the other station.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Detailed instructions

(XM tuner)

If you would rather not to tune in to the

other station, touch No.

If an alert for a song in the MyMix playlist is

set to off, no alert will be provided even

when the song is broadcast. Refer to Set-

If the stored title and the title of the song

being broadcast differ, no alert will be pro-

vided even if they are the same song.

Selecting the song title for which

you want to turn the alert off.

Turn the alert on or off.

(SIRIUS tuner)

Turning the alert on or off.

Turning the MyMix function on

or off.

Deleting a song from the

You can turn the MyMix function off and stop

the alerts for all the songs in the MyMix play-

list. To restart, turn this function on.

The MyMix function is on as the default set-

ting.

MyMix playlist for XM tuner

You can delete each song in the MyMix play-

list.

Switch to memo edit mode.

The MyMix playlist is displayed.

Turn the MyMix function on or off.

Delete the song title.

Setting up a song alert

Deleting the song title.

You can set up an alert (on or off) for each

song in the MyMix playlist. First, display the

MyMix playlist and then change each alert set-

ting. Set the alert to on to receive an alert

when the song is broadcast, or set it to off to

stop the alert for that song.

Deleting all the songs in the MyMix

playlist.

That song will be deleted from the MyMix play-

list.

Switch to memo edit mode.

A message to confirm deletion will ap-

pear. Touch Yes.

To cancel deletion, touch No.

The MyMix playlist is displayed.

Select the song title for which you

Deleting a song from the

MyMix playlist for SIRIUS tuner

You can delete each song in the MyMix play-

list.

want to turn the alert on or off.

(XM tuner)

The check mark is removed, and the alert for

that song is off.

(SIRIUS tuner)

Switch to memo edit mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Detailed instructions

Select the song title that you want to

Select a desired team in Team.

delete.

Switching the team name.

Selecting the song title that you

want to delete.

Turn the alert on or off.

Delete the song title.

Turning the alert on or off.

Deleting the song title.

The game alert function is activated for that

team.

A message to confirm deletion will ap-

When you have already selected 12 teams,

pear. Touch Yes.

That song will be deleted from the MyMix play-

list.

FULL is displayed and additional teams cannot

be selected. In this case, first delete a selected

team and then try again.

To cancel deletion, touch No.

Repeat these steps to select other

teams.

Using the Game Alert function

Up to 12 teams can be selected.

This system can alert you when games invol-

ving your favorite teams are about to start. To

use this function you need to set up a game

alert for the teams in advance.

Switching the Game Alert on or off

Once you select the teams, you need to turn

the Game Alert function on.

The Game Alert function is on at the default

setting.

This function is available for CD-SB10/SIR-

PNR2/SIR-PNR2C.

Selecting teams for Game Alert

When a game of a selected

team starts

When a game of the selected team is about to

start (or is currently playing) on a different sta-

tion, a game alert is displayed.

Start Game Alert setup.

Select a desired league in League

Switching to the other station to lis-

ten to the game.

Switching the league name.

Not tuning in to the other station.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Detailed instructions

Channel number—Channel name—Category

name—Artist name—Song title/Title name—

Composer name—Play time

Displaying game information

If any games of the selected teams are cur-

rently playing, you can display information on

the games and tune in to the broadcast chan-

nel.

Note

Play time is displayed during the Instant Re-

play mode.

Display the game information for the

selected team.

Using the Instant Replay

function

The following functions can be operated in In-

stant Replay mode.

Touch c or d (TRACK) to select a game.

The game is displayed, followed by more de-

tailed game information.

The game score will be updated automati-

To use this function, a Pioneer SIRIUS bus

interface (e.g. CD-SB10) is required.

To use this function, a SIRIUS plug-and-

play unit with an Instant Replay Function is

required.

cally.

Switch to the other station to listen to

the game.

For details, refer to the SIRIUS plug-and-

play unit’s manuals.

Switching to the other station to lis-

ten to the game.

To exit from Instant Replay mode, se-

If you have not selected any teams, NOT SET

lect another source or touch the following

icon.

is displayed.

When games involving your favorite teams are

not currently playing, NO GAME is displayed.

Exiting from Instant Replay mode.

Displaying the Radio ID

Channel number selection setting

Select a track

Press c or d (TRACK).

If you select CH000, the ID code is displayed.

Fast forward or reverse

Press and hold c or d (TRACK).

Select CH000.

Pause and play

Playing and pausing.

Switching the SIRIUS display

Actions will differ depending on the con-

nected SIRIUS tuner.

Touch SIRIUS information to switch the

SIRIUS display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Detailed instructions

The phone book display appears.

2 Select the phone number list.

The detailed phone number list of the selected

entry is displayed.

Switching the seek mode

There are two seek tuning settings, one is HD

(Digital broadcasting stations seek) and the

other is ALL (normal seek).

ALL—HD

Select the phone number.

If you want to store the phone number, touch

and hold the list.

Switching the reception mode

Make the call.

If the reception for a digital broadcast be-

comes poor, this unit automatically switches

to the analog broadcast of the same fre-

quency. If this function is set to D/A Auto, the

tuner switches between digital broadcast and

analog broadcast automatically. If this func-

tion is set to Analog, the tuner will only re-

ceive analog broadcasts.

End the call.

Note

Depending on the cellular phone, the phone book

may not be transferred automatically. In this

case, operate your cellular phone to transfer the

phone book. The visibility of this unit should be

on. Refer to Switching visible unit on page 51.

D/A Auto—Analog

Note

If SEEK MODE is set to HD and BLENDING is set

to Analog, the tuner cannot receive broadcasts.

In this case, the seek mode or reception mode is

changed automatically as follows:

Selecting a number by

alphabet search mode

When SEEK MODE is set to HD, if you switch

BLENDING from D/A Auto to Analog,

SEEK MODE is changed to ALL.

(Function of AVH-P5200BT)

When BLENDING is set to Analog, if you

switch SEEK MODE from ALL to HD,

BLENDING is changed to D/A Auto.

If a lot of numbers are registered in the phone

book, you can search for the phone number by

alphabet search mode.

Switch to phone book mode.

The phone book display appears.

Calling a number in the

phone book

(Function of AVH-P5200BT)

Touch ABC to switch to alphabet search

The phone book in your cellular phone will be

transferred automatically when the phone is

connected to this unit.

mode.

Touch the first letter of the entry you

are looking for.

After finding the number you want to call in

the phone book, you can select the entry and

make the call.

The Phone Book entries starting with that let-

ter (e.g. “Ben”, “Brian” and “Burt” when “B” is

selected) will be displayed.

Switch to phone book mode.

If you want to change the character to Rus-

sian, touch the icon. To return to English, touch

the icon again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Detailed instructions

Select Missed Calls, Dialed Calls or

Received Calls.

Changing the character to Russian.

Displaying the received call list.

Displaying the dialed call list.

Displaying the missed call list.

The order of the first name and last name may

be different from that of the cellular phone.

Touch the list to display the phone

number list of the selected entry.

If several phone numbers are included in an

entry, select one by touching the list.

If you want to switch to the call history list,

touch the icon.

Touch the list number to select a phone

number.

Switching to the call history list.

Name and phone number are displayed in the

detailed list.

If you want to store the phone number, touch

Make the call.

and hold the list.

Make the call.

End the call.

End the call.

Using the missed, received

and dialed call lists

Using the missed, received

and dialed call lists

(Function of AVH-P5200BT)

The 80 most recent calls dialed, received, and

missed are stored in the memory. You can

browse them and call numbers from these

lists.

(Function of AVH-P5200DVD)

The 80 most recent calls dialed, received, and

missed are stored in the memory. You can

browse them and call numbers from these

lists.

Switch to the call history list.

Switch to the call history list.

Touch a phone number or name (if en-

tered) you want to call.

Make the call.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Detailed instructions

End the call.

(AVH-P5200BT)

Setting automatic answering

If this function is on, this unit automatically

answers all incoming calls.

Using the preset dial lists

(Function of AVH-P5200BT)

You can easily store up to six phone numbers

as presets.

Turn automatic answering on or off.

(AVH-P5200DVD)

Display the preset screen.

(AVH-P5200BT)

Touch one of preset dial keys to select

the desired phone number.

If you want to delete a preset phone number,

touch and hold the preset dial key.

Adjusting the other party’s

listening volume

Make the call.

(Function of AVH-P5200BT)

End the call.

To maintain the good sound quality, this unit

can adjust the other party’s listening volume.

If the volume is not loud enough for the other

party, use this function.

Select Far end Volume.

Making a call by entering

phone number

1—2—3

(Function of AVH-P5200BT)

This function can be performed even while

talking on the phone.

Settings can be stored for each device.

Wed 28 may

12:45 PM

ABCDEHGHI 01

012345678901

Off

Switching the ring tone

You can select whether or not to use this

unit’s ring tone. If this function is set to on,

the ring tone for this unit will sound.

ꢀ

ꢁ

ꢂ

Important

Connect your cellular phone to this

Be sure to park your vehicle in a safe place and

apply the parking brake when performing this op-

eration.

unit.

Turn ring tone on or off.

(AVH-P5200DVD)

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Detailed instructions

Switch to the entering phone number

Touch Connection to select a device.

Start to search.

mode.

Starting to search.

Touch the number icons to input the

numbers.

Up to 24 digits can be entered.

Make the call.

While searching,

is displayed and when

available devices are found, the device names

or BD addresses (if names cannot be ob-

tained) are displayed.

If you want to switch between the device

names and BD addresses, touch the icon.

End the call.

Switching between the device

names and BD addresses.

Note

To cancel searching, touch Stop.

If five devices are already paired,

Entering phone number mode cannot be oper-

ated unless a Bluetooth telephone is connected

to this unit.

Memory Full is displayed and pairing cannot be

performed. In such cases, delete a paired device

first. Refer to Deleting a paired device. on the next

Setting the private mode

If no device can be found, Not Found is dis-

(Function of AVH-P5200BT)

played. In such cases, check the status of the

Bluetooth device and search again.

During a conversation, you can switch to pri-

vate mode (talk directly on your cellular

phone).

Bluetooth wireless connection on page 52.

Touch a device name to select the de-

vice you want to connect to.

While connecting, Pairing is displayed. If the

connection is established, Paired is displayed.

If the connection fails, Connection Error is

displayed. In such cases, try again from the be-

ginning.

Pairing from this unit

(Function of AVH-P5200BT)

The PIN code is set to 0000 as the default, but

can be changed. Refer to Entering PIN code for

Connection

01: Phone1

ꢀ

When establishing connection, the icon is dis-

02: Phone2

03: Phone3

04: Phone4

05: Phone5

played.

Touch the icon to disconnect the device.

Disconnecting a Bluetooth device.

Display the Bluetooth Connection

If you want to delete a paired Bluetooth tele-

Menu.

phone, display Delete OK?. Touch Yes to delete

the device.

Bluetooth wireless connection on the next

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Detailed instructions

If the connection fails, Connection Error is

displayed. In such cases, try again from the be-

ginning.

Deleting a paired device.

The PIN code is set to 0000 as the default, but

Never turn the unit off while the paired Blue-

can be changed. Refer to Entering PIN code for

tooth telephone is being deleted.

Using a Bluetooth device to

pair

Connecting to a Bluetooth

device automatically

(Function of AVH-P5200BT)

If you cannot open the connection between

your Bluetooth device and this unit from your

Bluetooth device, you can use this function to

establish a connection.

(Function of AVH-P5200BT)

If this function is set to on, a connection be-

tween your Bluetooth device and this unit will

take place automatically as soon as the two

devices are less than a few meters apart.

Initially, this function is set to on.

Display the Bluetooth Connection

Menu.

Display the Bluetooth Connection

Menu.

Touch Special Device to select the spe-

cial device.

Bluetooth devices that are difficult to establish

Touch Auto Connect to turn automatic

a connection with are called special devices. If

your Bluetooth device is listed as a special device,

select the appropriate one.

connection on.

If your Bluetooth device is ready for a Blue-

tooth wireless connection, a connection to

this unit will automatically be established.

Touch the special device list to open the

To turn automatic connection off, touch

connection.

This unit is now on standby for a connection

with the Bluetooth device.

Auto Connect again.

on.

Turn your vehicle's ACC switch off and

If five devices are already paired,

Memory Full is displayed and pairing cannot be

performed. In such cases, delete a paired device

first. Refer to Deleting a paired device. on this

Switching visible unit

(Function of AVH-P5200BT)

This function sets whether or not to make this

unit visible to the other device.

Use your Bluetooth device to establish

a connection.

The connection method is different depending

on the Bluetooth device. Refer to the manual

for your Bluetooth device to establish a con-

nection.

While connecting, Pair your phone is dis-

played. If the connection is established,

Paired is displayed.

Initially, this function is set to on.

Display the Bluetooth Connection

Menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Detailed instructions

Touch Visibility to select visibility off.

To turn visibility on, touch Visibility

again.

Using a cellular phone to

initiate a connection

(Function of AVH-P5200DVD)

A Bluetooth wireless connection can be estab-

lished from your phone by putting the unit into

initiating a connection mode.

You may need to refer to the operation manual

that came with your phone if you are unsure

how to initiate a connection from your phone.

Displaying BD (Bluetooth

Device) address

(Function of AVH-P5200BT)

This unit displays its BD address.

Display the Bluetooth Connection

Put the unit in initiating a connection

Menu.

mode.

Touch Bluetooth Version to select de-

unit.

Use a cellular phone to connect to this

vice information.

The BD address is displayed.

Operation varies depending on the type of cel-

lular phone.

You may need to enter the link code on your

cellular phone to complete the connection.

Entering PIN code for

Bluetooth wireless connection

(Function of AVH-P5200BT)

Registering a connected

cellular phone

To connect your Bluetooth device to this unit

via Bluetooth wireless technology, you need to

enter a PIN code on your Bluetooth device to

verify the connection. The default code is

0000, but you can change it with this function.

(Function of AVH-P5200BT)

You can register a phone that is temporarily

connected to this unit in order to take full ad-

vantage of the features available with Blue-

tooth wireless technology. Only one cellular

phone can be registered.

Display the Bluetooth Connection

Menu.

Start registering a connected cellular

phone.

Touch PIN Code Input to select

PIN code input.

Touch 1 to 0 to input pin code.

unit.

Use cellular phone to register to this

After inputting PIN code (up to 8 di-

If registration is successful, the device name

of the connected phone is displayed in the se-

lected assignment.

gits), store in this unit.

Storing the PIN code in this unit.

If the assignment is already taken, the device

name will be displayed. To replace an assignment

with a new phone, first delete the current assign-

ment.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Detailed instructions

If registration failed, the device name of the

take place automatically as soon as the two

devices are less than a few meters apart.

Initially, this function is set to on.

connected phone will not be displayed in the se-

lected assignment. In such cases, return to step

1 and try again.

Touch Auto Connect to turn automatic

connection on.

If your Bluetooth device is ready for a Blue-

tooth wireless connection, a connection to

this unit will automatically be established.

Voice recognition

(Function of AVH-P5200DVD)

If your cellular phone features voice recogni-

tion technology, you can make a call by voice

commands.

To turn automatic connection off, touch

Operation varies depending on the type of

cellular phone. Refer to the instruction

manual that came with your cellular phone

for detailed instructions.

Auto Connect again.

Turn your vehicle's ACC switch off and

on.

Start voice recognition.

Displaying BD (Bluetooth

Device) address

Say the name of your contact aloud.

(Function of AVH-P5200DVD)

This unit displays its BD address.

Touch Bluetooth Version to select de-

Connecting a Bluetooth

audio player

vice information.

(Function of AVH-P5200DVD)

A Bluetooth wireless connection can be estab-

lished by putting the unit into initiating a con-

nection mode.

The BD address is displayed.

Put the unit in initiating a connection

mode.

Refer to Bluetooth audio operations on page

31.

This unit is now on standby for connection

from Bluetooth audio player.

If your Bluetooth audio player is set ready for

Bluetooth wireless connection, connection to

this unit is automatically established.

Connecting to a Bluetooth

device automatically

(Function of AVH-P5200DVD)

If this function is set to on, a connection be-

tween your Bluetooth device and this unit will

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Menu operations

You cannot display the Audio/DSP function

menu when the mute function is on or a JPEG

file is playing.

Introduction of menu

operations

Audio

Fader/Balance

Graphic EQ

Auto EQ

F/R 0 L/R

Super Bass

Sonic Center Control

Loudness

L/R:0

High

Subwoofer

Off

345

Display menus.

Refer to Common operations for menu set-

tings/lists on page 13.

Touch any of the following touch panel

keys to select the menu to be adjusted.

1 Touch panel keys

Video Setup Menu

Refer to Setting up the DVD

player on page 58.

Audio function menu

Refer to Audio Adjustments on

the next page.

System menu

Refer to System settings on

page 62.

Entertainment menu

Refer to Entertainment settings

on page 67.

Custom menu

You can choose menus within

each menu (Audio function

menu, etc.) and register them

to this custom menu.

Refer to Customizing menus

on page 68.

Notes

You can display the Video setup menu when

a Disc, USB or SD source is selected.

If you start the Video setup menu, playback

is stopped.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Menu operations

Audio Adjustments

Display

Powerful

Natural

Vocal

Equalizer curve

Powerful

Natural

Notes

When selecting FM as the source, you cannot

switch to Source Level Adjuster.

When selecting Bluetooth telephone as the

source, you can not use this function.

Vocal

Custom1

Custom2

Flat

Custom 1

Custom 2

Flat

Using fader/balance adjustment

You can change the fader/balance setting to

provide an ideal listening environment for all

of the occupied seats.

Super Bass

Super bass

The equalizer curves for Custom1 and

Custom2 can be adjusted.

You cannot select Custom1 and Custom2

when using the auto-equalizer.

When Flat, no changes are made to the

sound. You can check the effects of the

equalizer curves by switching alternatively

between Flat and another equalizer curve.

Display the audio function menu.

subwoofer controller on page 62.

the previous page.

Touch Fader/Balance on the audio func-

tion menu.

Touch a or b to adjust the front/rear

Display the audio function menu.

speaker balance.

Range: Front:15 to Rear:15

speakers.

justed when the rear output setting is

Subwoofer. Refer to Setting the rear output and

the previous page.

Select F/R: 0 L/R: 0 when only using two

Touch Graphic EQ on the audio function

menu.

function is off.

The front/rear speaker balance cannot be ad-

You can select Graphic EQ when Auto EQ

Touch c or d to select the desired item.

Powerful—Natural—Vocal—Custom1—

Custom2—Flat—Super Bass

Touch c or d to adjust the left/right

speaker balance.

Range: Left:15 to Right:15

Adjusting the 8-band graphic equalizer

You can adjust the level of each band for the

equalizer curves.

Using the equalizer

You can adjust the equalization to match the

car’s interior acoustic characteristics as de-

sired.

A separate Custom1 curve can be created

for each source. If you make adjustments

when a curve other than Custom2 is se-

lected, the equalizer curve settings will be

stored in Custom1.

Recalling equalizer curves

A Custom2 curve that is common for all

sources can be created. If you make adjust-

ments when the Custom2 curve is se-

lected, the Custom2 curve will be updated.

There are seven stored equalizer curves which

you can easily recall at any time. Here is a list

of the equalizer curves.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Menu operations

Display the audio function menu.

Touch c or d to select a listening posi-

tion.

Range: Left:7 to Right:7

Touch Graphic EQ on the audio function

Adjusting loudness

menu.

Loudness compensates for deficiencies in the

low- and high-frequency ranges at low volume.

Touch c or d to select the desired item.

Powerful—Natural—Vocal—Custom1—

Custom2—Flat—Super Bass

Display the audio function menu.

Touch the Equalizer band to adjust.

Touch a or b to adjust the level of the

Touch Loudness on the audio function

equalizer band.

Range: +12dB to -12dB

menu.

You can then select another band and adjust

Touch c or d to select a desired level.

the level.

Off (off)—Low (low)—Mid (mid)—High

(high)

Using the auto-equalizer

The auto-equalizer is an equalizer curve cre-

ated by auto EQ (refer to Auto EQ (auto-equaliz-

ing) on page 65).

You can turn the auto-equalizer on or off.

If you connect an optional microphone to this

unit, you can use this function.

Using subwoofer output

This unit is equipped with a subwoofer output

which can be turned on or off.

The cut-off frequency and output level can

be adjusted when the subwoofer output is

on.

Display the audio function menu.

Touch Auto EQ to turn the auto-equali-

zer on or off.

You cannot use this function if auto EQ has

Touch Subwoofer on the audio function

menu.

Touch On or Off next to Subwoofer to

not been carried out.

turn the subwoofer output on or off.

Touch Normal or Reverse next to Phase

Using sonic center control

Sound that is suited for the listening position

can easily be created with this function.

to select the phase of subwoofer output.

Touch c or d next to Level to adjust

the output level of the subwoofer.

Range: +6 to -24

Display the audio function menu.

Touch c or d next to Frequency to se-

lect the cut-off frequency.

50Hz—63Hz—80Hz—100Hz—125Hz

Touch Sonic Center Control on the

audio function menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Menu operations

Only frequencies lower than those in the se-

lected range are outputted from the subwoo-

fer.

Settings are based on the FM volume level,

which remains unchanged.

Display the audio function menu.

Boosting the bass

You can boost the bass level.

Compare the FM volume level with the

level of the source you wish to adjust.

Display the audio function menu.

Touch Source Level Adjuster on the

audio function menu.

Touch Bass Booster on the audio func-

Touch a or b to adjust the source vo-

tion menu.

lume.

Range: +4 to –4

Touch c or d to select a desired level.

Range: 0 to +6

Notes

The AM volume level can also be adjusted

with this function.

Video CD, CD, compressed audio and DivX

are automatically set to the same source level

adjustment volume.

iPod and USB storage device are automati-

cally set to the same source level adjustment

volume.

External unit 1 and external unit 2 are automa-

tically set to the same source level adjustment

volume.

Using the high pass filter

When you do not want low sounds from the

subwoofer output frequency range to play

from the front or rear speakers, turn on the

HPF (high pass filter). Only frequencies higher

than those in the selected range are output

from the front or rear speakers.

Display the audio function menu.

Touch High Pass Filter on the audio

function menu.

Touch c or d next to Frequency to se-

lect cut-off frequency.

Off (off)—50Hz—63Hz—80Hz—100Hz—

125Hz

Only frequencies higher than those in the se-

lected range are output from the front or rear

speakers.

Adjusting source levels

With SLA (source level adjustment), the vo-

lume levels of each source can be adjusted to

prevent significant differences between

sources.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Menu operations

Setting the audio language

You can set the preferred audio language.

Setting up the DVD player

Setting the subtitle language

You can set a desired subtitle language. When

available, the subtitles will be displayed in the

selected language.

Display the Video Setup Menu.

Display the Video Setup Menu.

Touch Audio Language on the Video

Setup menu.

select Others on this page.

An audio language menu is displayed.

Touch Subtitle Language on the Video

Touch the desired language.

The audio language is set.

# If you have selected Others, refer to When you

Setup menu.

A subtitle language menu is displayed.

Touch the desired language.

The subtitle language is set.

If you have selected Others, refer to When you

Notes

If the selected language is not available, the

language specified on the disc is used.

You can also switch the audio language by

touching Audio during playback. (Refer to

Playing moving images on page 17.)

The setting made here will not be affected

even if the audio language is switched during

playback using Audio.

select Others on this page.

Notes

If the selected language is not available, the

language specified on the disc is displayed.

You can also switch the subtitle language by

touching the icon during playback. (Refer to

Playing moving images on page 17.)

The setting made here will not be affected

even if the subtitle language is switched dur-

ing playback using Subtitle.

Setting the menu language

You can set the preferred language in which

the menus recorded on a disc are displayed.

When you select Others

Display the Video Setup Menu.

A language code input display is shown when

Others is selected. Refer to Language code

chart for DVD on page 89.

select Others on this page.

Touch Menu Language on the Video

Touch 0 to 9 to input the language

Setup menu.

A menu language menu is displayed.

code.

To cancel the entered numbers, touch C.

Registering the code.

Touch the desired language.

The menu language is set.

If you have selected Others, refer to When you

Registering the code.

Note

If the selected language is not available, the lan-

guage specified on the disc is displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Menu operations

Pan Scan setting. Confirm whether the disc

Setting the multi-angle DVD

display

The angle icon can be set so it appears on

scenes where the angle can be switched.

16 : 9 LB

package bears the

mark.

The TV aspect ratio cannot be changed for

some discs. For details, refer to the disc’s in-

structions.

Display the Video Setup Menu.

Setting the slide show interval

JPEG files can be viewed as a slide show on

this unit. In this setting, the interval between

each image can be set.

Touch Multi Angle on the Video Setup

menu to turn angle icon display on or off.

Display the Video Setup Menu.

Setting the aspect ratio

There are two kinds of display: a wide screen

display that has a width-to-height ratio (TV as-

pect ratio) of 16:9, and regular display that has

a TV aspect of 4:3. Be sure to select the correct

TV aspect for the display connected to REAR

MONITOR OUTPUT.

Touch Slide Show on the Video Setup

menu to select the slide show interval.

Touch Slide Show repeatedly until the desired

setting appears.

5sec – JPEG images switch at intervals of 5

seconds

10sec – JPEG images switch at intervals of

10 seconds

15sec – JPEG images switch at intervals of

15 seconds

When using regular display, select either

Letter Box or Pan Scan. Selecting 16 : 9

may result in an unnatural picture.

If you select the TV aspect ratio, the unit’s

display will change to the same setting.

Manual – JPEG images can be switched

manually

Display the Video Setup Menu.

Setting parental lock

Touch TV Aspect on the Video Setup

Some DVD video discs let you use parental

lock to restrict children from viewing violent

and adult-oriented scenes. You can set paren-

tal lock to the desired level.

menu to select the TV aspect ratio.

Touch TV Aspect repeatedly until the desired

aspect ratio appears.

16 : 9 – Wide screen picture (16:9) is dis-

When you have a parental lock level set

and play a disc featuring parental lock,

code number input indications may be dis-

played. In such cases, playback will begin

when the correct code number is entered.

played as is (initial setting)

Letter Box – The picture is the shape of a

letterbox with black bands on the top and

bottom of the screen

Pan Scan – The picture is cut short on the

right and left sides of the screen

Notes

When playing discs that do not specify

Pan Scan, the disc is played back in

Letter Box display even if you select the

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Menu operations

details, refer to the instruction manual that

came with the disc.

Setting the code number and level

A code number must be registered in order to

play back discs with parental lock.

Changing the level

You can change the set parental lock level.

Display the Video Setup Menu.

Display the Video Setup Menu.

forget your code number on this page.

Touch Parental on the Video Setup

menu.

Touch Parental on the Video Setup

Touch 0 to 9 to input a four digit code

menu.

number.

To cancel the entered numbers, touch C.

Touch 0 to 9 to input the registered

code number.

Registering the code.

The code number is set, and the level can now

be set.

This sets the code number, and the level can

now be changed.

Touch 1 to 8 to select the desired level.

If you enter an incorrect code number, the

icon is displayed. Touch C and enter the correct

code number.

Touch Enter.

The parental lock level is set.

If you forget your code number, refer to If you

8 – Playback of the entire disc is possible

(initial setting)

7 to 2 – Playback of discs for children and

non-adult-oriented discs is possible

1 – Playback of discs for children only is

possible

Touch 1 to 8 to select the desired level.

Touch Enter.

The new parental lock level is set.

Notes

If you forget your code number

Press RESET.

We recommend to keep a record of your code

number in case you forget it.

The parental lock level is stored on the disc.

Look for the level indication written on the

disc package, included literature or on the

disc itself. Parental lock of this unit is not pos-

sible if a parental lock level is not stored on

the disc.

Setting the DivX subtitle file

You can select whether or not to display DivX

external subtitles.

The DivX subtitles will be displayed even

when Custom is selected if no DivX exter-

nal subtitle files exist.

With some discs, the parental lock may be ac-

tive only for certain levels of scenes. The play-

back of those scenes will be skipped. For

Display the Video Setup Menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Menu operations

Touch DivX Subtitle on the Video Setup

Touch DivX VOD on the Video Setup

menu to select the desired subtitle setting.

menu.

Original – Display the DivX subtitles

Custom – Display the DivX external subti-

tles

Touch Deactivation Code.

To cancel deactivation, touch Cancel.

Touch OK.

Notes

The deactivation completed.

Up to 42 characters can be displayed on one

line. If more than 42 characters are set, the

line breaks and the characters are displayed

on the next line.

Up to 126 characters can be displayed on one

screen. If more than 126 characters are set,

the excess characters will not be displayed.

Automatic playback of DVDs

When a DVD disc with a DVD menu is in-

serted, this unit will cancel the menu automa-

tically and start playback from the first chapter

of the first title.

Some DVDs may not operate properly. If

this function is not fully operated, turn this

function off and start playback.

Displaying the DivX VOD

registration code

In order to play DivX VOD (video on demand)

content on this unit, the unit must first be re-

gistered with a DivX VOD content provider. For

registration, generate a DivX VOD registration

code and submit it to your provider.

Display the Video Setup Menu.

Touch DVD Auto Play to turn automatic

playback on.

To turn automatic playback off, touch

DVD Auto Play again.

Keep a record of the code as you will need

it when you register your unit to the DivX

VOD provider.

Display the Video Setup Menu.

Touch DivX VOD on the Video Setup

menu.

Registration Code and Deactivation Code

appear.

Touch Registration Code.

Your registration code is displayed.

Displaying the deactivation code

If your device is already activated, deactivate it

by entering the deactivation code.

Display the Video Setup Menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Menu operations

Touch Rear Speaker on the system

System settings

Switching the auxiliary setting

Activate this setting when using an auxiliary

device connected to this unit.

menu to switch the subwoofer output or

full-range speaker.

When no subwoofer is connected to the rear

output, select Full (full-range speaker).

When a subwoofer is connected to the rear

output, select Subwoofer (subwoofer).

When the rear output setting is Subwoofer,

Display the system menu.

you cannot operate the following procedure.

Touch AUX Input on the system menu

Notes

to turn AUX Input on or off.

Even if you change this setting, there is no

output unless you turn the subwoofer output

on (refer to Using subwoofer output on page

56).

Setting AV input

Activate this setting when using an external

video component connected to this unit.

If you change this setting, subwoofer output

in the audio menu will return to the factory

settings.

Both rear speaker lead outputs and RCA rear

output are switched simultaneously in this

setting.

Display the system menu.

Touch AV Input on the system menu to

turn AV Input on or off.

Switching sound muting/

attenuation

Sound from this system is automatically

muted or attenuated when a signal from

equipment with a mute function is received.

Setting the rear output and

subwoofer controller

This unit’s rear output (rear speaker leads out-

put and RCA rear output) can be used for full-

range speaker (Full) or subwoofer

(Subwoofer) connection. If you switch the

rear output setting to Subwoofer, you can

connect a rear speaker lead directly to a sub-

woofer without using an auxiliary amp.

Initially, the unit is set for a rear full-range

speaker connection (Full).

Sound from this system returns to normal

when the muting or attenuation is can-

celed.

Display the system menu.

Touch Mute/ATT until the desired set-

Turn the unit off.

ting appears.

Touch Mute/ATT until the desired setting ap-

pears in the display.

Display the system menu.

Mute – Muting

ATT-20dB – Attenuation (ATT-20dB has a

stronger effect than ATT-10dB)

ATT-10dB – Attenuation

Off – Turns the sound muting/attenuation

off

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Menu operations

Some characters may not be displayed

properly.

Notes

When Mute is displayed, the sound is turned

off and no audio adjustments can be made.

When ATT is displayed, the sound is attenu-

ated and only the volume can be adjusted.

(No other audio adjustments can be made.)

Operation returns to normal when the phone

connection is ended.

Display the system menu.

Touch System Language on the system

menu to select the desired language.

Touch the desired language.

English (English)—Español (Spanish)—

Português (Portuguese)—Русский (Russian)

Changing languages for CAUTION

Some operations on this unit are prohibited

while driving or needs to be paid a careful at-

tention when operating. In such case, a cau-

tion appears on the display. You can change

the language of the cautions at this setting.

Clearing Bluetooth memory

(AVH-P5200BT only)

Important

Display the system menu.

Never turn the unit off while the Bluetooth mem-

ory is being cleared.

Touch Caution Language to select your

Turn the unit off.

desired language.

Touch any of the following touch panel

Display the system menu.

keys to select the Caution Language.

English — English

Español — Spanish

Français — French

Touch Bluetooth Memory Clear on the

system menu.

Touch Clear.

Selecting the menu language

After selecting a desired item, a confirmation

display appears. Touch OK to delete the mem-

ory.

The menu language can be selected from four

languages.

If text information such as the title name, artist

name or a comment is embedded in a Eur-

opean language or Russian, they can also be

displayed on this unit.

If you do not want to clear the selected mem-

ory, touch Cancel.

The language can be changed for the fol-

lowing:

— System menu

Updating Bluetooth connection

software

(AVH-P5200BT only)

— Video Setup

This function is used to update this unit with

the latest software. For information on the soft-

ware and updating, refer to our website.

— On-screen display

— Multi language setting for DivX

If the embedded language and the selected

language setting are not the same, text in-

formation may not be displayed properly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Menu operations

Touching the Flap Set Back keys allows

Important

you to move the LCD panel back and forth.

Never turn the unit off and never disconnect the

phone while the software is being updated.

The LCD panel slides to the back.

Display the system menu.

The LCD panel slides to the front.

Touch Bluetooth Software Update.

Touch Start to display the data transfer

Setting the automatic open

function

mode.

Follow the on-screen instructions to finish up-

To prevent the display from hitting the shift

lever of an automatic vehicle when it is in the

P (park) position, or when you do not wish the

display to open/close automatically, you can

set the automatic open function to manual

mode.

dating the software.

Displaying the Bluetooth

system version

(AVH-P5200BT only)

If this unit fails to operate properly, you may

need to consult your dealer for repair. In such

cases, you may be asked to specify the system

version. Perform the following procedure to

check the version on this unit.

Display the system menu.

Touch AUTO FLAP to select whether to

open/close the display automatically or

manually.

Each time you touch AUTO FLAP the setting

switches between:

Turn the unit off.

Display the system menu.

ON – The LCD panel will open or close auto-

matically when the ignition switch is turned

on or off.

OFF – You have to press OPEN/CLOSE to

open/close the LCD panel.

Touch Bluetooth Version Information to

display to the version of the Bluetooth

module of this unit.

Switching the warning tone

Adjusting the LCD panel slide

position

You can adjust the LCD panel slide position so

that the panel is set back or forward.

If the front panel is not detached from the

head unit within four seconds of turning off

the ignition, a warning tone sounds. You can

turn off the warning tone.

Display the system menu.

lecting a source using the touch panel keys

Touch Flap Set Back.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Menu operations

Ground – When the polarity of the con-

nected lead is negative while the gear shift

is in REVERSE (R) position

Off – When a rear view camera is not con-

nected to this unit

Touch DT.WARNING to turn the warn-

ing tone on.

To turn the warning tone off, touch

DT.WARNING again.

Setting the rear view camera

(back up camera)

Auto EQ (auto-equalizing)

The auto-equalizer automatically measures

the car’s interior acoustic characteristics, and

then creates an auto-equalizer curve based on

that information.

CAUTION

Pioneer recommends the use of a camera

which outputs mirror-reversed images.

Otherwise, the screen image will appear re-

versed.

WARNING

This unit features a function that automatically

switches to the rear view camera video (REAR

VIEW CAMERA IN) when a rear view camera

is installed on your car and the gear shift is

moved to the REVERSE (R) position.(For

more details, consult your dealer.)

As a loud tone (noise) may be emitted from the

speakers when measuring the car's interior

acoustic characteristics, never perform auto EQ

while driving.

CAUTION

After you set up the rear view camera set-

ting, move the gear shift to REVERSE (R)

and confirm that the rear view camera

video is shown on the display.

Thoroughly check the conditions before per-

forming auto EQ as the speakers may be da-

maged if these functions are performed when:

— The speakers are incorrectly connected.

(For example, when a rear speaker is con-

nected as a subwoofer output.)

Change this setting if the display switches

to the rear view camera video by error while

you are driving forward.

To stop watching the rear view camera

video and return to the source display,

— A speaker is connected to a power amp de-

livering output higher than the speaker’s

maximum input power capability.

press and hold MENU/

If the microphone is placed in an unsuitable

position the measurement tone may become

loud and measurement may take a long time,

resulting in battery drainage. Be sure to place

the microphone in the specified location.

Touch the RearView source icon to display

the rear view camera image while driving.

Touch the source icon again to turn the

rear view camera off. For details, refer to Se-

on page 11.

Display the system menu.

Touch Camera Polarity on the system

menu to select the appropriate setting.

Battery – When the polarity of the con-

nected lead is positive while the gear shift

is in REVERSE (R) position

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Menu operations

Before operating the auto EQ function

Performing auto EQ

Stop the car in a place that is quiet,

close all the doors, windows and sun roof,

and then turn the engine off.

If the engine is left running, engine noise may

prevent correct auto EQ.

Carry out auto EQ in as quiet a place as

possible, with the car engine and air condi-

tioning switched off. Also cut power to car

phones or portable telephones in the car, or

remove them from the car before carrying

out auto EQ. Sounds other than the mea-

surement tone (surrounding sounds, en-

gine sound, telephones ringing etc.) may

prevent correct measurement of the car in-

terior acoustic characteristics.

Fix the optional microphone in the cen-

ter of the headrest of the driver’s seat, fa-

cing forward.

The auto EQ may differ depending on where

you place the microphone. If desired, place

the microphone on the front passenger seat to

carry out auto EQ.

Be sure to carry out auto EQ using the op-

tional microphone. Using another micro-

phone may prevent measurement, or result

in incorrect measurement of the car inter-

ior acoustic characteristics.

In order to perform auto EQ, the front

speaker must be connected.

When this unit is connected to a power

amp with input level control, auto EQ may

not be possible if the power amp’s input

level is set below the standard level.

When this unit is connected to a power

amp with an LPF, turn this LPF off before

performing auto EQ. Also set the cut-off fre-

quency for the built-in LPF of an active sub-

woofer to the highest frequency.

The distance has been calculated by com-

puter to be the optimum delay to give accu-

rate results for the circumstances, so

please continue to use this value.

— The reflected sound within the car is

strong and delays occur.

Turn the ignition switch to ON or ACC.

If the car’s air conditioner or heater is turned

on, turn it off. Noise from the fan in the air

conditioner or heater may prevent correct auto

EQ.

Display the system menu.

balance adjustment on page 55.)

— The LPF on active subwoofers or exter-

nal amps delay the lower sounds.

Auto EQ changes the audio settings as fol-

lows:

— The fader/balance settings return to the

center position. (Refer to Using fader/

Touch Auto EQ Measurement to enter

auto EQ measurement mode.

Plug the microphone into the micro-

phone input jack on this unit.

— The equalizer curve switches to Flat.

(Refer to page 55.)

— The front, center and rear speakers will

automatically be adjusted to a high

pass filter setting.

Previous settings for auto EQ will be over-

written.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Menu operations

Touch Start to start auto EQ.

Entertainment settings

Selecting the illumination color

This unit is equipped with multiple-color illu-

mination.

When the 10-second countdown starts,

get out of the car and close the door within

10 seconds.

A measurement tone (noise) is emitted from

the speakers, and auto EQ measurement be-

gins.

When auto EQ is completed, Complete is dis-

played.

When the car’s interior acoustic characteris-

tics cannot be measured correctly, an error

message will be displayed. (Refer to Under-

standing auto EQ error messages on page 77.)

Direct selection from preset

illumination colors

You can select an illumination color from the

color list.

Display the entertainment menu.

It takes about nine minutes for auto EQ mea-

surement to be completed when all the speakers

are connected.

Touch Appearance.

To stop auto EQ, touch Stop.

To cancel auto EQ measurement mode during

Touch Illumination and then touch a

color on the list.

this procedure, touch the following touch panel

key.

Customizing the illumination color

Canceling auto EQ measurement

mode.

Display the entertainment menu.

Store the microphone carefully in the

Touch Appearance.

glove compartment or another safe place.

If the microphone is subjected to direct sun-

light for an extended period, high tempera-

tures may cause distortion, color change or

malfunction.

Touch Illumination and then touch

Custom.

Display the customizing menu.

Note

Displaying the customizing menu.

(AVH-P5200DVD)

Do not press h (eject) to open or close the panel

when you are using the microphone.

Touch the color bar to customize the

color.

Touch c or d to fine-tune the color.

Touch the icon and hold to store the

customized color in the memory.

Storing the customized color in

the memory.

Memo

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Menu operations

The customized color has been stored in the

memory.

The set color will be recalled from the memory

the next time you touch the same icon.

Customizing menus

Display menu columns to register.

Touch and hold the menu column to

Selecting the OSD color

The OSD color can be changed.

To cancel registration, touch and hold the

menu column again.

Display the entertainment menu.

Display the custom menu and choose a

registered menu.

Touch Appearance.

Touch Screen.

Note

Touch one of the colors on the list.

You can register up to 12 columns.

Selecting the background display

You can switch the background that is dis-

played when listening to a source.

Display the entertainment menu.

(back up camera) on page 65.)

Touch Background.

Touch the desired setting.

If no JPEG images are stored in this unit, you

cannot select photo. To store a JPEG image to

this unit, refer to Capture an image in JPEG files

on page 41.

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Other Functions

You cannot adjust the picture adjustment for

Changing the picture

adjustment

You can adjust the Brightness (brightness),

Contrast (contrast), Color (color) ,Hue (hue),

Dimmer (dimmer), Temperature (tempera-

ture), Black Level (black level) and

the rear view camera when Camera Polarity is

set to Off. (Refer to Setting the rear view camera

If the color system is set to PAL/PAL-M/

SECAM, you cannot adjust Hue.

With some rear view cameras, picture adjust-

ment may not be possible.

RGB Dot ADJ (RGB dot clock adjustment) for

each source and rear view camera.

Touch c or d to adjust the selected

You cannot adjust Color, Hue, Contrast

and Black Level for the audio source.

item.

Each time you touch c or d, the level of the

selected item increases or decreases.

Press and hold MENU to display

Picture Adjustment.

The adjustment function names are displayed.

Dimmer can be adjusted from +1 to +48.

Temperature can be adjusted from +3 to –3.

If you are adjusting the

Touch Black Level and RGB Dot ADJ to

Picture Adjustment, select the unit.

adjust.

Black Level can be set on or off.

RGB Dot ADJ can be set to 1 or 2.

Adjusting the Picture Adjustment

for the Navigation unit.

NAVI

Notes

Rear

View

You cannot operate this function while driving.

Different Brightness/Contrast/Dimmer set-

tings can be set for when the illumination

switch is on and when it is off.

Adjusting the Picture Adjustment

for the rear view camera.

Adjusting the Picture Adjustment

for the source.

Source

Setting rear monitor output

The output source for the rear monitor can be

switched to the following:

Touch any of the following touch panel

keys to select the function to be adjusted.

Picture Adjustment items are displayed.

Front – The source on the front screen of

this unit

Brightness – Adjusts the black intensity

Contrast – Adjusts the contrast

Color – Adjusts the color saturation

Hue – Adjusts the tone of color (red or

green is emphasized)

Disc – The video and sound from the DVD

AV – The video and sound from AV input

AUX– The source for AUX input

Off– No source

Dimmer – Adjusts the brightness of the dis-

play

Note

Temperature – Adjusts the color tempera-

ture, resulting in a better white balance

Black Level – Emphasizes the dark portions

of images making the difference between

bright and dark more distinct

You cannot play DivX files on the rear and front

monitors at the same time.

RGB Dot ADJ – Adjusts phase shifting by

dot clock when a Navigation unit is con-

nected

Download from Www.Somanuals.com. All Manuals Search And Download.

Section

Other Functions

To cancel the adjustment, press and hold

Adjusting the response

positions of the touch panels

(Touch Panel Calibration)

If you feel that the touch panel keys on the

screen deviate from the actual positions that

respond to your touch, adjust the response po-

sitions of the touch panel. There are two ad-

justment methods: 4-point adjustment, in

which you touch four corners of the screen;

and 16-point adjustment, in which you make

fine-adjustments on the entire screen.

MENU.

Gently touch the center of the + mark

displayed on the screen.

After you touch all the marks, the data for the

adjusted position is saved.

Do not turn off the engine while the data is

being saved.

Press and hold MENU to complete the

adjustment.

Touch the screen gently for adjustment.

Forcefully pressing the touch panel may da-

mage the touch panel. Do not use a sharp

pointed tool such as a ballpoint pen or me-

chanical pen. Doing so may damage the

screen.

Using an AUX source

A separately sold auxiliary device such as a

VCR or portable device can be connected to

this unit. When connected, the auxiliary device

is automatically recognized as an AUX source

and is assigned to AUX.

If the touch panel cannot be adjusted prop-

erly, consult your local Pioneer dealer.

Turn the unit off.

About AUX connection methods