Amplifier Manual
Manual del Amplificador
Manuel del’amplificateur
Models: Ti2 1000.4, Ti2 1600.5
Características:
Features:
Caractéristiques:
•
•
•
•
•
•
•
•
•
Alta eficiencia de clase D Topología
•
High Efficiency Class D Topology
•
•
•
•
•
•
•
•
•
Petit format pour faciliter l’installation
Topologie de classe D de gamme complète
Circuit équilibré Entrée différentielle
Audiophile NJM2068M Amplificateurs opérationnels
Haute Vitesse IR de classe D chipset
Filtres croisés passe-haut et passe-bas
Tamaño compacto para fácil instalación
Diferencial balanceada circuitos de entrada
Audiophile NJM2068M amplificadores operacionales
IR Chipset Ultra Alta Velocidad
•
•
•
•
•
•
•
•
•
•
•
•
•
Compact Size for Easy Installation
Balanced Differential Input Circuitry
Audiophile NJM2068M Operational Amplifiers
Ultra High Speed IR Class D Chipset
High, Band and Low Pass Crossovers
ADAPT Power Management System
Surface Mount Component Technology
Direct Insert Power and Speaker Terminals
Audio Precision Quality Control Verification
High Temperature Plexiglass cover
Signal Clipping Indicators
Crossovers paso alto y bajo
ADAPT Sistema de Gestión de Energía
Tecnología “Surface Mount Component”
Conexiones directas de terminales de poder y de
parlantes
Control de verificación de calidad de precisión de audio
Cubierta de Plexiglás resistente a altas temperaturas
RMD - Puerto de display para monitoreo remoto
RBCF - Control de nivel de Subwoofer remoto incluido
(Ti2 1600.5)
ADAPT système d’alimentation
Technologie de composant monté en surface
Terminaux d’alimentation et de haut-parleurs à
insertion directe
Vérification du contrôle de la qualité de la précision audio
Couvercle de plexiglas résistant aux températures élevées
RMD - Entrée De L’affichage de Tension a Distance
RBCF- Niveau de contrôle de passe-bas inclus (Ti2 1600.5)
•
•
•
•
•
•
•
•
RMD - Remote Monitoring Display Port
RBCF- Remote Subwoofer Level Control included
(Ti2 1600.5)
Download from Www.Somanuals.com. All Manuals Search And Download.
Amplifier Owner’s Manual
Key Features
BALANCED DIFFERENTIAL INPUTS
Provides maximum rejection of unwanted noise from upstream
components.
ULTRA HIGH SPEED IR CLASS D CHIPSET
A
B
C
D
State of the art IR20957 chipset switches at more than 300kHz
for blistering audio performance. All four or five chipsets are
sync’d together in unison to eliminate unwanted harmonics or
distortion.
AUDIOPHILE NJM2068M OP-AMPS
Most mobile amplifiers today use the standard NJM4558 op-amp which
has a bandwidth of 3MHz, slew rate of 1V/uSec and noise level of 1.4uV.
The NJM2068M is simply a better performer with a bandwidth of 19MHz,
slew rate of 6V/uSec and noise level of .44uV.
POST FILTER FEEDBACK
Feedback is when part of the output signal is “fed back”into the
original signal to ensure stability and accurate sound. Class D
amplifiers use output filters (see the 4 vertical coils below), but
most DO NOT INCLUDE these filters in the feedback loop. Ti2
amplifiers INCLUDE or take feedback after its passed through
these filters. The result is more accurate sound that rivals some
of the best class A/B amplifiers.
The result is quieter, faster and wider bandwidth performance that
ensures the original music material is reproduced as accurately as
possible.
E
G
D
F
C
B
A
THERMAL ROLLBACK CIRCUIT
ADAPT POWER MANAGEMENT SYSTEM
E
F
Under most conditions, Ti2 amplifiers generate moderate
to low heat. However, if extreme conditions exist, as
temperatures rise the amplifier will automatically adjust the
power output, so your music continues to play. These changes
are inaudible and vastly reduce the chance for any thermal
shutdown events.
Full power output from 11 to 15 volts: ADAPT delivers the same output
power regardless of the vehicle’s electrical system voltage. Instantaneous or
long term voltage drops have no effect on the amplifier’s power output. This
means more dynamic and less distorted audio output.
Dual power modes provide maximum efficiency: ADAPT seamlessly
optimizes the power supply and Class D operating circuitry by adapting to
the end user’s listening habits. When the ADAPT circuit senses lower signal
levels, it will automatically optimize the amplifier’s power supply and Class
D circuitry to a low power mode that maximizes efficiency and minimizes
heat to almost zero. As a signal increase is detected the amplifier instantly
shifts into a high power mode, where the power supply and Class D sections
are now optimized to deliver massive power and headroom for those
demanding listening sessions. The amplifier is constantly monitoring and
adapting between these modes which results in higher overall efficiency,
much lower operating temperatures and rock solid reliability.
LOW EMI CIRCUIT BOARD DESIGN
G
Most class D amplifiers can emit EMI noise that can cause
problems with AM/FM reception or other devices in the
vehicle. Ti2 amplifiers have undergone intense real world
engineering and testing to vastly reduce or eliminate these
issues. Careful PCB layout using four layers (most amplifiers
feature just two) along with many key filters ensures a very
low possibility of any interference issues.
Download from Www.Somanuals.com. All Manuals Search And Download.
Amplifier Owner’s Manual
Ti2 1000.4
4 Channel Power Amplifier
FRONT AND REAR INPUTS
SENS
Connect preamp signal cables from headunit to these inputs. The front
and rear inputs must be used, if only the front input is used then the rear
speaker outputs will have no output signal.
Used to reach maximum amplifier power with a wide variety of headunits.
X-OVER CONFIG
FLAT: Crossovers are turned off
HPF/LPF CROSSOVER FREQUENCY
Controls the crossover points for the speaker outputs.
HPF: High pass crossover is on
LPF: Low pass crossover is on
LP/BP: Low and high pass crossovers are both on, creating a Bandpass (BP) filter for
midbass/midrange drivers. If running a subwoofer the HPF now becomes a
subsonic filter, to turn off the HPF/subsonic filter set it to 20Hz.
Note: The front HP and rear LP crossovers extend to 4kHz, so its possible to run a
component speaker system fully active. The tweeters would be powered by the
front channels and the midbasses by the rear channels. Be sure to check with your
speaker’s manufacture for the correct tweeter and midbass crossover points to avoid
speaker damage.
+12V
REMOTE MONITORING DISPLAY (RMD)
Connect optional RMD Voltage Display to this port.
This must be connected to the fused positive terminal (+12V) of the car’s
battery. The fuse must be located within 18 inches of the battery.
SPEAKER OUTPUTS
REMOTE
Used to connect the amplifier to speakers. Ti2 1000.4’s minimum
impedance is 4 ohms bridged or 2 ohms stereo. Use the Left + and
Right - to bridge the channels.
This must be connected to switched +12V, usually a trigger wire coming
from the head unit or ignition.
GROUND
CLIP INDICATORS (located on top of the amplifier)
Lights when the amplifier reaches near maximum output. Under heavy
use the clip indicators should be flashing during the peaks of the
music. The clip indicator should not stay lit for long periods of time (more
than 1 or 2 seconds), if this is the case you need to reduce system volume
or the SENS of the amplifier.
This must be connected to the negative terminal of the car’s battery or
bolted to a clean, unpainted part of the chassis of the vehicle.
Download from Www.Somanuals.com. All Manuals Search And Download.
Amplifier Owner’s Manual
Ti2 1600.5
5 Channel Power Amplifier
FRONT, REAR AND SUB INPUTS
Connect preamp signal cables from headunit to these inputs.
SENS
Used to reach maximum amplifier power with a wide variety of headunits.
SUB INPUT SWITCH
Determines which input will feed signal to the subwoofer channel.
“OUT”or SUB = Use the Sub Input
“IN”or F/R = Use the Front and Rear inputs as its signal will be summed
then sent to the sub channel of the amplifier
REMOTE BASS LEVEL CONTROL (RBCF)
This port is for connecting the remote subwoofer level control. This allows up to
20dB of volume adjustment for the subwoofer channel. This is not a bass boost, it
controls the level of the low pass signal.
PHASE
This allows the phase of the subwoofer output to be adjusted from 0 to 180
degrees. This adjustment can help achieve better “up front”subwoofer bass and
resolve subwoofer cancellation problems in certain installations. Each installation is
different, slowly adjust and listen for best results.
HPF/LPF/SUBSONIC CROSSOVER FREQUENCY
Controls the crossover points for the speaker outputs.
REAR X-OVER CONFIG
HP: High pass crossover is on
BP: Low and high pass crossovers are both on, creating a Bandpass (BP)
filter for midbass/midrange drivers. Check on page 4 (Ti2 1000.4) for more
details on how to use the the BP setting for a fully active crossover system.
+12V
REMOTE MONITORING DISPLAY (RMD)
This must be connected to the fused positive terminal (+12V) of the car’s
battery. The fuse must be located within 18 inches of the battery.
Connect optional RMD Voltage Display to this port.
SPEAKER OUTPUTS
REMOTE
Used to connect the amplifier to speakers. Ti2 1600.5’s minimum
impedance is 4 ohms bridged or 2 ohms stereo on front and rear
channels. Use the Left + and Right - to bridge the channels. Minimum
impedance is 2 ohms for the subwoofer channel and its not bridgeable.
This must be connected to switched +12V, usually a trigger wire coming
from the head unit or ignition.
GROUND
This must be connected to the negative terminal of the car’s battery or
bolted to a clean, unpainted part of the chassis of the vehicle.
CLIP INDICATORS (located on top of the amplifier)
Lights when the amplifier reaches near maximum output. Under heavy
use the clip indicators should be flashing during the peaks of the
music. The clip indicator should not stay lit for long periods of time (more
than 1 or 2 seconds), if this is the case you need to reduce system volume
or the SENS level of the amplifier.
Download from Www.Somanuals.com. All Manuals Search And Download.
Amplifier Owner’s Manual
Ti2 1000.4 Crossover settings
All crossover frequency potentiometers have 41 detents or “clicks”so the end user can set the exact cross over frequency desired.
FRONT AND REAR CHANNELS
FRONT HP
(45~4kHz)
REAR HP
(45~4kHz)
REAR HP
(20~4kHz)
REAR LP
(40~4kHz)
clicks
49
49
1
43
44
22
22
36
36
2
3
50
44
22
36
4
50
44
22
36
5
50
44
23
36
6
51
45
24
37
7
54
48
26
37
8
57
51
28
37
9
63
55
29
37
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
68
61
31
44
75
67
34
56
83
83
37
65
93
97
41
77
105
121
143
172
215
291
313
330
350
383
409
442
494
544
624
737
887
1.0k
1.3k
1.5k
1.6k
1.9k
2.0k
2.4k
2.9k
3.6k
4.1k
4.1k
112
132
162
204
274
288
306
330
364
380
411
460
503
579
671
778
1.0k
1.2k
1.3k
1.5k
1.7k
1.9k
2.2k
2.7k
3.0k
3.6k
3.7k
3.7k
47
92
54
108
131
164
202
215
232
246
266
290
316
352
398
441
524
626
797
1.1k
1.2k
1.4k
1.6k
1.8k
2.1k
2.7k
3.3k
4.0k
4.1k
4.1k
62
75
93
121
128
135
146
159
171
188
209
230
267
309
372
472
666
738
832
974
1.2k
1.5k
2.0k
3.1k
3.8k
3.9k
Download from Www.Somanuals.com. All Manuals Search And Download.
Amplifier Owner’s Manual
Ti2 1600.5 CRossover Settings
All crossover frequency potentiometers have 41 detents or “clicks”so the end user can set the exact cross over frequency desired.
FRONT AND REAR CHANNELS
SUB CHANNEL
FRONT HP
(20~4kHz)
REAR HP
(20~4kHz)
REAR LP
(40~4kHz)
SUBSONIC
(10~50hz)
LP
clicks
clicks
(30~300Hz)
23
23
1
24
24
34
34
1
17
17
17
17
17
18
18
18
18
19
19
19
20
20
21
21
23
25
26
27
27
27
28
29
30
30
32
33
34
35
37
38
39
40
40
41
42
43
43
44
44
27
27
2
2
3
23
24
34
3
27
4
23
24
34
4
27
5
23
24
34
5
27
6
24
24
35
6
27
7
25
26
35
7
27
8
25
27
36
8
30
9
27
28
36
9
33
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
28
30
39
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
37
30
33
41
41
33
36
49
46
36
40
64
51
41
46
74
57
47
53
87
65
54
62
103
123
153
200
217
234
247
269
291
320
352
394
444
520
614
768
958
1.1k
1.3k
1.5k
1.7k
2.0k
2.5k
3.0k
4.1k
4.1k
74
66
76
85
81
98
99
106
126
133
144
153
165
178
197
221
253
291
355
461
649
728
809
955
1.1k
1.4k
2.1k
2.8k
3.7k
3.8k
125
132
141
152
164
176
194
216
238
279
328
381
503
673
746
844
955
1.2k
1.5k
2.0k
2.8k
3.7k
3.7k
117
123
128
133
139
146
154
162
172
181
193
203
221
237
244
252
264
272
282
295
303
315
315
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual del Amplificador
Ti2 1000.4
Amplificador de Potencia de 4 Canales
ENTRADAS DELANTERA y TRACERA
Conectar cables de señal de preamp del radio a estas entradas. Ambas
entradas, Front y Rear deben ser usadas, si solo se usa el Front no habrá
señal en el Rear output.
SENS
Usado para alcanzar el máximo poder amplificado con una gran variedad de
radios.
CONFIGURACION
FRECUENCIA de CROSSOVER
Controla el nivel de frecuencia de crossover.
FLAT: El crossover es off
HP: El crossover high pass es “on”
LP/BP: El crossover low y high pass es “on”
DISPLAY PARA MONITOREO REMOTO (RMD)
+12V
Conectar el display de voltaje opcional RMD a este puerto.
Este debe ser conectado al fusible del terminal positivo (+12V) de la
batería del auto. El fusible debe ser ubicado a menos de 18 pulgadas de
la batería.
SALIDA de PARLANTES
Usado para conectar los parlantes. La mínima impedancia para el Ti2
1000.4 es 4 ohms o 2 ohms estéreo. Usar Left+ y Right – para el bridge.
REMOTO
Este debe ser conectado al shwich +12V. Usualmente al cable de gatillo
que viene del radio o del encendido.
INDICADORES CLIP
Se ilumina cuando el amplificador llega a cerca de la salida máxima. En
condiciones de uso pesado de los indicadores de clip debe parpadear
durante los picos de la música. El indicador de saturación no debe
permanecer encendida durante largos períodos de tiempo (más
de 1 o 2 segundos), si este es el caso de tener que reducir el volumen del
sistema o nivel del amplificador.
TIERRA
Este debe ser conectado al terminal negativo de la batería del auto o a
una parte limpia y sin pintura del chasis del auto.
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual del Amplificador
Ti2 1600.5
Amplificador de Potencia de 5 Canales
ENTRADAS
SENS
Conectar cables de señal de preamp del radio a estas entradas. Las
Usado para alcanzar el máximo poder amplificado con una gran variedad de
radios.
entradas frontales, traseros y sub debe ser utilizado. Si una entrada no se
utiliza no habrá salida para ese conjunto de canales.
PHASE
HPF/LPF FRECUENCIA de CROSSOVER
Controla el nivel de frecuencia de crossover.
Esto permite que la fase de la salida para ajustarse de 0 a 180 grados. Este
ajuste puede ayudar a lograr una mejor “up front”bass subwoofer y resolver
los problemas subwoofer cancelación en determinadas instalaciones. Cada
instalación es diferente, ajuste lentamente y escuchar para obtener mejores
resultados.
SUB SELECCION DE ENTRADE
Determina qué entrada se alimenta la señal en el canal de subwoofer.
“OUT”o SUB = Usar la entrada Sub
“IN”o F / R = Usa el frontal y las entradas traseras que su señal se sumarán
luego enviado a la sub canal del amplificador.
CONTROL REMOTO de NIVEL de BAJOS
Este puerto es para conectar el control de nivel de bajos. Esto permite un
ajuste de hasta 20dB de volumen. Este no es un bass bost, este controla el
nivel de low pass signal.
+12V
DISPLAY PARA MONITOREO REMOTO (RMD)
Este debe ser conectado al fusible del terminal positivo (+12V) de la
batería del auto. El fusible debe ser ubicado a menos de 18 pulgadas de
la batería.
Conectar el display de voltaje opcional RMD a este puerto.
SALIDA de PARLANTES
Usado para conectar los parlantes. La mínima impedancia para el Ti2
1600.5 es 4 ohms o 2 ohms estéreo. Usar Left + y Right – para el bridge.
Impedancia mínima es de 2 ohms para el canal de subwoofer y no es
bridgeable.
REMOTO
Este debe ser conectado al shwich +12V. Usualmente al cable de gatillo
que viene del radio o del encendido.
TIERRA
INDICADORES CLIP
Este debe ser conectado al terminal negativo de la batería del auto o a
una parte limpia y sin pintura del chasis del auto.
Se ilumina cuando el amplificador llega a cerca de la salida máxima. En
condiciones de uso pesado de los indicadores de clip debe parpadear
durante los picos de la música. El indicador de saturación no debe
permanecer encendida durante largos períodos de tiempo (más
de 1 o 2 segundos), si este es el caso de tener que reducir el volumen del
sistema o nivel del amplificador.
Download from Www.Somanuals.com. All Manuals Search And Download.
Manuel de l’amplificateur
Ti2 1000.4
amplificateur de puissance
ENTRÉE
NIVEAU
Sert à atteindre une puissance d’amplificateur maximale avec une grande variété
d’unités principales.
Reliez les câbles de signal préampli de l’unité principale sur ces bornes.
FRÉQUENCE DE FILTRE PASSIF PASSE-BAS et
PASSE-HAUT
Contrôle les points de filtre pour les sorties du haut-parleur.
CONFIG
FLAT : Croisé est éteint.
HP : L’haute passe croisée est sur.
LP/BP : Basse et haute croisements de passage sont à la fois sur.
+12V
ENTRÉE DE L’AFFICHAGE DE TENSION A DISTANCE (RMD)
Connectez le RMD d’affichage de tension facultatif à cette prise jack.
Doit être relié à la borne positive protégée par fusible (+12 V) de la batterie
de la voiture. Le fusible doit être situé à moins de 18 pouces de la batterie.
SORTIES ENCEINTES
Utilisé pour connecter l’amplificateur aux enceintes. Ti2 1000.4 impédance
minimale est de 4 ohms ponté ou stéréo 2 ohms.
BORNE TÉLÉCOMMANDE
Doit être relié à la borne +12 V commutée, généralement un fil d’amorçage
sortant de l’unité principale ou de l’allumage.
INDICATEURS CLIP
S’allume lorsque l’amplificateur atteint près de sortie maximale. Cas d’utilisation
intensive les indicateurs d’écrêtage doit clignoter pendant les pics de la musique.
L’indicateur d’écrêtage ne devrait pas rester allumé pendant de longues périodes
de temps (plus de 1 ou 2 secondes), si c’est le cas, vous devez réduire le volume
du système ou au niveau de l’amplificateur.
MASSE
Doit être relié à la borne négative de la batterie de la voiture ou boulonné
sur un élément propre et non peint du châssis du véhicule.
Download from Www.Somanuals.com. All Manuals Search And Download.
Manuel de l’amplificateur
Ti2 1600.5
amplificateur de puissance
NIVEAU
ENTRÉE
Sert à atteindre une puissance d’amplificateur maximale avec une grande variété
d’unités principales.
Reliez les câbles de signal préampli de l’unité principale sur ces bornes.
FRÉQUENCE DE FILTRE PASSIF PASSE-BAS et
PASSE-HAUT
Contrôle les points de filtre pour les sorties du haut-parleur.
COMMANDE À DISTANCE DU NIVEAU DES BASSES
Ce port sert à connecter la télécommande de niveau. Cela permet un ajustement du
volume allant jusqu’à 20 dB. Ce n’est pas une amplification des basses mais permet de
contrôler le niveau du signal du filtre passe-bas.
PHASE
Ceci permet à la phase de la sortie à être ajustée de 0 à 180 degrés.
Cet ajustement peut aider à atteindre une meilleure bass “up front”
subwoofer et résoudre les problèmes d’annulation caisson de graves
dans certaines installations. Chaque installation est différente, ajustez
lentement et d’écouter pour obtenir les meilleurs résultats.
SÉLECTION D’ENTRÉE SUB
Détermine quelle source sera signal de nourrir le canal de subwoofer.
“OUT”ou SUB = utiliser l’entrée Sub
“IN”ou F / R = Utilisez le Front et les entrées arrières comme son signal seront
additionnées puis envoyé à la sous-canal de l’amplificateur.
+12V
ENTRÉE DE L’AFFICHAGE DE TENSION A DISTANCE (RMD)
Connectez le RMD d’affichage de tension facultatif à cette prise jack.
Doit être relié à la borne positive protégée par fusible (+12 V) de la batterie
de la voiture. Le fusible doit être situé à moins de 18 pouces de la batterie.
SORTIES ENCEINTES
BORNE TÉLÉCOMMANDE
Doit être relié à la borne +12 V commutée, généralement un fil d’amorçage
sortant de l’unité principale ou de l’allumage.
Utilisé pour connecter l’amplificateur aux haut-parleurs. Ti2 1600.5 impédance d
‘minimum est de 4 ohms ponté ou 2 ohms stéréo. Canal Subwoofer est stable à
2 ohms.
INDICATEURS CLIP
MASSE
S’allume lorsque l’amplificateur atteint près de sortie maximale. Cas d’utilisation
intensive les indicateurs d’écrêtage doit clignoter pendant les pics de la musique.
L’indicateur d’écrêtage ne devrait pas rester allumé pendant de longues périodes
de temps (plus de 1 ou 2 secondes), si c’est le cas, vous devez réduire le volume
du système ou au niveau de l’amplificateur.
Doit être relié à la borne négative de la batterie de la voiture ou boulonné
sur un élément propre et non peint du châssis du véhicule.
Download from Www.Somanuals.com. All Manuals Search And Download.
Phoenix Gold
A Division of AAMP of America™
13190 56th Court
Clearwater, Florida 33760
P: 888-228-5560
© 2013 AAMP of Florida, Inc
Designed and Engineered in the USA
LIMITED WARRANTY ON AMPLIFIERS
Phoenix Gold warrants this product to be free of defects in materials and workmanship for a period of one (1) year from the original date of purchase. This
warranty is not transferable and applies only to the original purchaser from an authorized Phoenix Gold dealer in the United States of America only. Should service
be necessary under this warranty for any reason due to manufacturing defect or malfunction, Phoenix Gold will (at its discretion), repair or replace the defective
product with new or remanufactured product at no charge. Damage caused by the following is not covered under warranty: accident, misuse, abuse, product
modification or neglect, failure to follow installation instructions, unauthorized repair attempts, misrepresentations by the seller. This warranty does not cover
incidental or consequential damages and does not cover the cost of removing or reinstalling the unit(s). Cosmetic damage due to accident or normal wear and
tear is not covered under warranty.
INTERNATIONAL WARRANTIES:
Products purchased outside the United States of America are covered only by that country’s Authorized Phoenix Gold reseller and not by Phoenix Gold. Consumers
needing service or warranty information for these products must contact that country’s reseller for information.
Download from Www.Somanuals.com. All Manuals Search And Download.
|