Philips Video Game Controller SGC2910 User Manual

SGC2910

User manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

IMPORTANT: Before using this product please read your PC system instruction manual

for safety and other information

Introduction

Thank you for purchasing the SGC2910Wireless PC Controller for use with Personal Computers You are now

ready for total enjoyment of all your favorite PC Games from up to 30 feet away Included docking USB receiver

ensures convenience and high-level performance The Controller is equipped with two built-in vibration motors,

which have unbalanced weights to provide vibration feedback in games that support this feature In addition, for

the ultimate in control, an advanced mouse and key emulation proﬁle editor software is included to enable added

functionality and programming options

System Requirements

• IBM compatible personal computer with a Pentium 350 or higher processor

• MicrosoftWindowsVista 32, 98SE,ME, 2000 or XP operating system

• 32 MB of RAM or higher

• 35 MB of available HDD space

• Double-speed CD-ROM drive or higher

• SuperVGA monitor with display card supporting High Color

• USB port

Product Features

A) Advanced 2 4GHz RFTechWirelessTechnology

B) Auto Sleep andWake function

C) Auto Scan

D) Two (2) analog control sticks-Left/Right

E) Four (4) digital ﬁre buttons (1,2,3,4)

F) Four (4) shoulder buttons (5,6,7,8)

G) Start & Select buttons (function as 9, and 10 button)

H) Analog Button

I) Analog LED Indicator

J) Built in DualVibration Feedback Motors with on/off switch

K) 8-Way directional control pad

L) Turbo ﬁre button

M) Force Connect button enables players to change their player position anytime (Advance Feature)

N) USB Docking Receiver

O) Superior Long Distance linkWireless technology UP to 30 feet

Download from Www.Somanuals.com. All Manuals Search And Download.

Controller Diagram

Button Descriptions

• Directional Pad-Represents UP, DOWN, LEFT, RIGHT and four diagonals Directional pad will function as POV

(Point ofView) hat during analog mode

• Buttons “1”,“2”,“3”, and “4” are default ﬁre buttons and are digital in nature.

• Left analog and right analog sticks - each contain two axes Left analog stick controls the X andY axis Right

analog stick controls the Rz and Z axis Also, there is a “hidden” button “11” and “12” under each stick that are

activated when the analog stick is depressed inward The ‘hidden’ buttons function in both analog and digital

modes

• Buttons “5”,“6”,“7”, and “8” are all digital shoulder buttons

• Analog button - used to switch the controller from digital to analog mode (and vice versa) Digital mode is the

default mode The red LED will illuminate when the controller is in analog mode and off in digital mode

• Turbo Button - Use when desiring to engage the controller in a repeating mode (Auto Fire)

• Start / Select buttons-serve as digital buttons (9,10) See game manual for use of these buttons

• F Connect Button -This button is found on the SGC2910Wireless PC Controller and on the docking receiver

marked with PHILIPS logo This button is used to force link a SGC2910Wireless PC Controller and docking

receiver An advanced feature of this function is as follows; Suppose player 2 wants to change to player 1, just

press the F Connect button on his SGC2910Wireless PC Controller, then press the F Connect button on the

player 1 receiver, his controller will become player 1 controller

Power Switch

The power switch is located on the back of the SGC2910Wireless PC Controller The switch can be set to three

settings as shown in the CONTROLLER DIAGRAM (photo 3) image Off setting will turn the SGC2910Wireless

PC Controller power off On setting turns the SGC2910Wireless PC Controller power on Vibration off setting

turns the SGC2910Wireless PC Controller power on, but the vibration feedback is powered off to conserve

battery and enable longer playing time

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Descriptions

Analog Button

Use to switch between digital and analog Digital mode is the default mode In digital mode, the left analog stick

digital controls the X andY axis The right analog stick emulates the 1, 2, 3, and 4 action buttons In the analog

mode, the Digital directional pad functions as a point of view hat while the left analog stick controls the X and

Y axis The right analog stick controls the Rz and Z axis The LED light nearest to the Analog button will be

illuminated when Analog mode is on

Note:The D-pad functions as a point of view control for most software titles, but may operate differently

depending on the design of each individual game

Turbo Button

The turbo feature of the SGC2910Wireless PC Controller allows the user to set various keys as a turbo ﬁre

(Auto Fire) “repeating mode” This means that user can then hold down the button of his/her choice and the

action will be repeated (without having to hit the button numerous times) This is especially useful in games that

require weapons to be ﬁred over and over again.

Programming Instructions:

Press and hold the desired ﬁre button then press the turbo button one time (LED Illuminates and Flash).You

now have turbo ﬁre. Repeat and you will remove turbo ﬁre.When turbo ﬁre is used, the LED within the turbo

button will ﬂash.Turbo ﬁre can be assigned to buttons 1,2,3,4,5,6,7,8, 11,12, Select and Start.

Note:Turbo ﬁre will also work with your custom proﬁles. In this instance the turbo ﬁre will repeat the

keyboard key that was programmed to the SGC2910Wireless PC Controller button

Force Connect Button

The F Connect button is used to force link the SGC2910 controller and docking receiver The F Connect button

is found on the SGC2910Wireless PC Controller and docking receiver marked with PHILIPS logo By pressing

the F Connect button on SGC2910Wireless PC Controller and the docking receiver, you can force these two

devices to connect This feature is used when multiple SGC2910Wireless PC Controllers are used in the same

location

Auto Sleep

The SGC2910Wireless PC Controller will enter sleep mode after 1 minutes without any activity This mode

will conserve battery life Press the Select, Start, Button 11, or Button 12 to wake up the SGC2910Wireless PC

Controller

Vibration Feedback

The SGC2910Wireless PC Controller has two internal motors Their weights are unbalanced to provide

vibration when it is activated by game software

Note:The vibration feedback will only function with software titles that support vibration You must install

the SGC2910Wireless PC Controller software There are many different force feedback and rumble effects

available, however due to differences in software and hardware design, the SGC2910Wireless PC Controller

may not support all effects.You will ﬁnd that the range of effects that the SGC2910Wireless PC Controller

supports will vary from game to game

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Installation procedure for users ofWindows^®XP & 2000

To properly install your SGC2910Wireless PC Controller, the controller must be connected to your USB

port ﬁrst. OnceWindows XP and 2000 have properly loaded the HID (human interface device) drivers for the

SGC2910 you can begin software installation Carefully follow the steps below

Installation procedure for users ofWindows^®98SE & ME

Installation step forWindows 98SE and ME is the same as theWindows XP and 2000 However,you will need to install

the software ﬁrst and once ﬁnished,you can plug in the controller.Please perform the installation in this order to

ensure the SGC2910 and software is installed properly Carefully follow the steps below in the correct order

Note: If you are connecting a USB device for the ﬁrst time,Windows 98SE and ME may ask for theWindows

Setup CD-ROM during installation to install the required system ﬁles.You will need to place theWindows

Setup CD-ROM in your CD-ROM drive to ﬁnish the installation.

Controller Setup and Installation

1 Make sure the SGC2910Wireless PC Controller on/off switch is in the off position Remove the battery

cover and install three (3) AAA batteries into the SGC2910Wireless PC Controller (not included) Plug the

USB docking receiver into an available USB port on the PC (Plug directly to a USB port on your PC tower

or desktop )

2 Windows 98SE, ME, 2000, and XP will automatically detect the SGC2910Wireless PC Controller upon

connection TheWireless PC Controller will be detected byWindows as“SGC2910Wireless PC Controller”

3 InWindows 98SE and ME, aWindows message will announce “NEW HARDWARE FOUND” The ADD

NEW HARDWAREWIZARD will open announcing thatWindows has detected a USB Human Interface

Device Click ‘NEXT’ to continue Windows will ask,“What do you wantWindows to do?” Choose

the default option:“Search for the best driver for your device” Then click ‘NEXT’ Follow the onscreen

instructions to allowWindows to install the recommended HID drivers for your device (NOTE: If you

are connecting a USB device for the ﬁrst time,Windows may ask for theWindows Setup CD-ROM during

installation to install the required system ﬁles.)

4 InWindows XP and 2000, aWindows message will announce that “NEW HARDWARE FOUND”, followed

by another message announcing “Human Interface Device Found” Windows will then automatically load the

correct HID drivers for theWireless PC Controller

5 Once installation has completed,Windows may prompt you to restart your PC If this occurs please select‘YES’

Note: LED on the docking receiver ﬂashes when scanning for the SGC2910Wireless PC Controller and stays

illuminated when connection is complete RF connect button on controller will stay illuminated continuously

while the SGC2910Wireless PC Controller on/off switch is on

Software Installation for Users ofWindows^®

1 The SGC2910Wireless PC Controller should be connected to your PC before beginning software

installation underWindows XP and 2000. InWindows 98SE and ME the software is installed ﬁrst.

2 Close down all programs that are currently running on your computer

3 Place the SGC2910 software CD into your CD-ROM drive

4 Click on the ‘START’ button in theWindowsTask Bar and choose ‘RUN’ Click ‘BROWSE’ and choose your

CD-ROM drive The ‘LOOK IN’ box should display your CD-ROM drive NOTE:You may need to click on

the ‘My Computer’ icon in order to select your CD-ROM drive

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

5 Select ‘Setup for PhilipsWireless PC Controller exe’ and click OK The following window should appear

6. Once initialization has ﬁnished, the ‘SGC2910Wireless PC Controller’ InstallWizard screen will appear.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

7 After reading the notice, press the ‘NEXT’ button to begin the software installation

You should now see the following screen indicating that the software is being installed on your system

Note: During installation onWindows XP and 2000 the following digital signature message may appear

The message will read that the “Philips Controller has not passedWindows Logo testing” Please click

“Continue Anyway” or “Yes” to continue with the installation

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

8 InWindows XP andWindows 2000, the SGC2910Wireless PC Controller should be connected to your PC

before beginning software installation If the SGC2910 is not connected to your PC, the following warning

message will appear If this message appears, you must connect the SGC2910Wireless PC Controller to the

computer You may need to wait a few seconds forWindows to load the HID drivers Once completed, you

can click the “OK” button

9 When the PC detects the SGC2910Wireless PC Controller, the following message will appear and ask you

to disconnect the controller Once you have disconnected the SGC2910, you should click the ‘OK’ button

If the message reappears you should wait several seconds and then click the ‘OK’ button Some PCs require

several seconds to detect the SGC2910 as disconnected

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

10 You can now click the ‘FINISH’ button at the following screen to complete the installation

11 Once installation is complete you can reconnect the SGC2910 to your PC’s USB port Windows may prompt

you to restart your PC If this occurs please select ‘YES’

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Installation Notes

1 You can abort the software installation by clicking the ‘CANCEL’ button The following screen would then

appear Clicking ‘RESUME’ will resume the installation, while clicking ‘EXIT SETUP’ will quit the installation

2 If you previously installed the SGC2910 software on your PC the followingWindows prompt may appear

This prompt will only appear if you selected to backup proﬁles during a previous SGC2910 software

uninstall. If you click ‘Yes’ the backup proﬁles will be automatically loaded. If you click ‘No’ the backup

proﬁles will be deleted.This prompt will not appear during the ﬁrst installation of the SGC2910 software.

Download from Www.Somanuals.com. All Manuals Search And Download.

Properties

SGC2910Wireless PC Controller Properties

Congratulations, you should have completed installing your SGC2910Wireless PC Controller and its software

The SGC2910Wireless PC Controller is now ready for use You should now test all the functions of your

SGC2910Wireless PC Controller to ensure it is functioning properly Verify that the SGC2910Wireless PC

Controller is connected to your PC before continuing Verify that your SGC2910Wireless PC Controller is

turned on and not in sleep mode You should press the ‘START’ button to verify it is not in sleep mode

1 To test the SGC2910 you will need to open theWindows Control Panel and click on the Game Controllers

or Gaming Options icon

2 InWindows 98SE, ME, and 2000 you must click on the ‘START’ button in theWindowsTask Bar and select

‘SETTINGS’ and ‘CONTROL PANEL’ Now click on the Gaming Options Icon

3 InWindows XP, you must click on the ‘START’ button in theWindowsTask Bar and select ‘CONTROL

PANEL’ IfWindows XP is running in CategoryView you select “PRINTERS and OTHER HARDWARE’ and

then ‘GAME CONTROLLERS If running in ClassicView you click on the ‘GAME CONTROLLERS’ icon

4 Once Game Controllers/Gaming Options has opened the SGC2910Wireless PC Controller should be listed

in the main Game Controllers/Gaming OptionsWindow with a status of OK next to it

5 Highlight “PhilipsWireless PC Controller” by clicking on it Then click on ‘PROPERTIES’ button to open the

SGC2910Wireless PC Controller PropertiesWindow

6 TheWireless PC Controller Properties consists of four pages for testing all the functions of the Philips

Wireless PC Controller

Download from Www.Somanuals.com. All Manuals Search And Download.

Properties

7 ‘TEST PAGE’ is used for verifying that all buttons and controls are functioning properly Pressing a button

on the SGC2910Wireless PC Controller will highlight that button on the ‘TEST PAGE’ Move the analog

sticks and d-pad of theWireless PC Controller and see if they respond correctly By default the d-pad will

function as a POV hat Placing a check in the “Remap POV hat to Left Joystick” will set the d-pad to control

the X/Y axes This will disable the d-pad’s default POV controls and the d-pad and left analog stick will have

the same directional movement controls. Clicking the ‘Advanced’ button will open the Proﬁle Editor main

menu You should take some time to familiarize yourself with how your SGC2910 controller functions See

how the controls function in analog and digital mode

Download from Www.Somanuals.com. All Manuals Search And Download.

Properties

8 The ‘CALBRATION PAGE’ is used to calibrate the analog sticks This page is only used if you experience

misaligned axes or erratic, shaky response of the analog sticks on the ‘TEST PAGE’ Click the ‘SET’ button

and follow the onscreen instructions

Download from Www.Somanuals.com. All Manuals Search And Download.

Properties

9 The ‘EFFECT PAGE’ is used to verify that the vibration motors are functioning properly Move the left

analog stick to test the vibration of the left and right motor

Note:The ‘ABOUT PAGE’ displays information regarding theWireless PC Controller and the version

number of the installed driver

10 Once all tests have been performed, you can click ‘OK’ to close SGC2910Wireless PC Controller

properties If your PC game supports USB game controllers you can now start playing your games If you

have a PC game that only supports the keyboard and mouse you should look through the ‘Mouse and Key

Proﬁle Editor Software’ section to learn how to program the SGC2910 for use with your game.

Congratulations, you have now completed familiarizing yourself with how your SGC2910Wireless PC

Controller operates At this time, if your PC game supports USB game controllers you can start playing your

games If you have a PC game that only supports the keyboard and mouse you should look through the “Mouse

and Key Proﬁle Editor Software: section to learn about this advance software tool that allows you to program

the SGC2910Wireless PC Controller for use with these games

Download from Www.Somanuals.com. All Manuals Search And Download.

Proﬁle Editor

Mouse and Key Proﬁle Editor Software

What is the Proﬁle Editor Software?

The Proﬁle Editor is a program that allows you to customize your SGC2910Wireless PC Controller for PC

games that do not support USB game controllers It can program keyboard keys and mouse movement to the

SGC2910, allowing you to use the controller with PC games that only support the mouse and keyboard You can

create multiple proﬁles for each PC game you own.This allows you to have a customized control layout for the

various PC games you play

What is Proﬁle?

A Proﬁle is a set of programmed keyboard keys and control settings that determines how your SGC2910

functions in a PC game. Multiple Proﬁles can be created and saved for use with multiple games.

Should I use the Proﬁle Editor?

The use of the Proﬁle Editor is optional. If a PC game supports USB game controllers then you should not use

the Proﬁle Editor. Most PC games have an “Options/Setup” or “Controller Conﬁguration” menu screen where

you can conﬁgure your controller’s buttons to perform commands in the game. It is recommended that you use

these menu screens if available. Users should conﬁgure the SGC2910 by using the game’s conﬁguration screen.

The Proﬁle Editor is for use with PC games that only support the mouse and keyboard as input devices.Typically,

game controllers could not be used with these PC games.The Proﬁle Editor will allow you to use your SGC2910

with these PC games You are able to assign keyboard keys, mouse buttons, and mouse movement to the

controller with the Proﬁle Editor.This will allow you to use the SGC2910 with PC games that only support the

keyboard and mouse

Note: Check if your PC game supports USB game controllers. If it does, then you should not use the Proﬁle

Editor To verify if a PC game will work with USB game controllers, you should check the recommended

speciﬁcations on the game packaging, check the instruction manual, or look in the game’s “Options/Setup”

menu You can also check the game publisher’s website or contact their technical support department

How to program the SGC2910 with Proﬁle Editor Software

The following section will show you how to create a proﬁle for the SGC2910Wireless PC Controller. Creating a

proﬁle will allow you to use the SGC2910 with your mouse and keyboard games.

1. You can start the Proﬁle Editor by double-clicking on the ‘SGC2910Wireless PC Controller’ desktop

shortcut.An image of the desktop shortcut is shown below.You can also start the Proﬁle Editor by clicking

on the “ADVANCED” button within theTest Page of the SGC2910Wireless PC Controller Properties

Download from Www.Somanuals.com. All Manuals Search And Download.

Proﬁle Editor

2. You should now see the main menu of the Proﬁle Editor. In the main menu you can assign keyboard keys

and mouse movement to the SGC2910 You can assign a keyboard key to any of the SGC2910’s buttons and

d-pad directionals You can assign mouse movement to the left or/and right analog stick

3 To program a controller button you must click on the button label representing

the controller key In the screen below we are programming button 7

Download from Www.Somanuals.com. All Manuals Search And Download.

Proﬁle Editor

4 When you click on a button label a pop-up menu will appear with three available options;Assign a key, Mouse

Left Button, and Mouse Right Button Each option will be described below You select the desired option by

clicking on it

a Assign a key … -This option is used to assign any keyboard key to the highlighted controller button

Once this option has been selected the Advanced Key Map window will appear

b Pressing any keyboard key will assign the pressed key to the selected controller button In our example

above,the L key has been assigned to controller button 7 Pressing the‘Cancel’ button will cancel the

programming and return you to the main menu Clicking‘OK’ will program the L key to controller’s button 7

c Once you click OK, you will be returned to the main menu You will now see that button 7’s label has

changed to “7:L” This indicates that pressing controller button 7 will produce the L key

Download from Www.Somanuals.com. All Manuals Search And Download.

Proﬁle Editor

d Mouse Left Button –This option allows you to assign the mouse’s left button to the highlighted button

Once selected, the controller is automatically programmed In our example below, the left mouse

button has been assigned to the d-pad right directional

e Mouse Right Button –This option allows you to assign the mouse’s right button to the highlighted

button Once selected, the controller is automatically programmed In our example below, the right

mouse button has been assigned to the controller’s button 3

Download from Www.Somanuals.com. All Manuals Search And Download.

Proﬁle Editor

f You can repeat the steps described above to program all the buttons of the controller Programming the

d-pad is the same as programming buttons

5 Mouse movement can be assigned to the Left or/and Right analog sticks Mouse movement is the only option

that can be assigned to the analog sticks Mouse movement can be assigned to one or both analog sticks

a Click on the label of the analog stick you wish to program In our example, the right analog stick is

selected You can then select the Map to Mouse Movement option to automatically assign mouse

movement to the right analog stick

Download from Www.Somanuals.com. All Manuals Search And Download.

Proﬁle Editor

b You will then return to the main menu The mouse movement has been assigned to the right analog

stick Moving the right analog stick will control the mouse cursor

Download from Www.Somanuals.com. All Manuals Search And Download.

Proﬁle Editor

6. SAVE button – Once you have ﬁnished programming you should click the SAVE button to save your proﬁle

for a use at a later date

a. Clicking the SAVE button will bring up the following window.Type a proﬁle name within the “File Name’

box and click the Save button. Note: It is recommended to save proﬁles with the same name as the PC

game you desire to use the proﬁle with. By default,Windows XP, 2000, ME & 98SE proﬁles are saved to

the C:\Program Files\Philips\Wireless PC Controller\proﬁle directory.UnderWindowsVista proﬁles are

saved to the C:\Users\Public\Public Documents\Wireless PC Controller Proﬁles\ Proﬁles.

7. LOAD button –The LOAD button is used to load a previously saved proﬁle.

a. Clicking the LOAD button will bring up the following window. Select the desired proﬁle you wish to load

by clicking on it. Once the proﬁle has been highlighted, you can click the open button.

Note: Before playing your game you will need to load the desired proﬁle you created for that game. Please

verify that you have loaded the correct proﬁle for the game you wish to play. It is always a good idea to

check the proﬁle before you begin the PC game.This will ensure the SGC2910’s controls are conﬁgured

correctly for the game

Download from Www.Somanuals.com. All Manuals Search And Download.

Proﬁle Editor

b When you return to the main menu all the controls of the SGC2910 will be assigned according to the

loaded proﬁle.

8 DEFAULT button – Clicking on the DEFAULT button will reset the SGC2910 controls to the default

setting The default setting is recommended for use with PC games that support USB game controllers

9 SPEED button –This button will open the Mouse Speed Adjust sub-menu as shown below This sub-menu

is used to adjust the velocity and acceleration of the emulated mouse movement These two options allow

you to improve the emulated mouse movement of the analog sticks In some PC games, the emulated

mouse movement may move to rapidly or slowly.You may also ﬁnd precision to be poor.Adjusting these

two options will improve the emulated mouse movement and provide a better game play experience

a Velocity –You can adjust velocity by dragging the slider with your mouse’s left button The velocity

setting adjusts how fast the mouse cursor will move when you use the SGC2910’s analog stick This

setting adjusts the number of pixels the mouse cursor will move per second The left of the slider will

cause the velocity to be slower, while the right side of the slider will increase the velocity

b Acceleration –You can adjust acceleration by dragging the slider with your mouse’s left button The

acceleration setting adjusts the sensitivity of the SGC2910’s analog stick The left of the slider will cause

the acceleration to be slower, while the right side of the slider will increase the acceleration

Note: It is recommended that you adjust the velocity and acceleration to see what changes it causes to the

emulated mouse movement

10. PRINT button –This button allows you to print the main menu of the Proﬁle Editor for reference during

gameplay A printout will provide you with a reference of the assigned keys

Congratulations, you now know all the features and functions of the proﬁle editor software.You are now ready

to create your own custom proﬁle for your PC games.Assignments and programming are automatically loaded

as the changes are made. Once you have completed your proﬁle you should save it for a later date.You can then

close the Proﬁle Editor as the created proﬁle is automatically loaded.

Note: If you want to test your proﬁle it is recommended that you simply use your text editor or Microsoft

Word^® Pressing the controller’s buttons in these programs and PC games will output the assigned

keyboard keys Give it a try Move the analog stick that you assigned mouse movement to Your mouse

cursor should automatically move

Download from Www.Somanuals.com. All Manuals Search And Download.

Uninstall

When the SGC2910 is in digital mode the d-pad will control mouse movement and lose any controller buttons

that are programmed to it It is recommended that the SGC2910 be set to analog mode when you desire to use

the Proﬁle Editor.

Uninstall

Software uninstall for users ofWindows^®98SE, ME, 2000, XP

PC Controller software can be uninstalled if desired There are two procedures for uninstalling theWireless

PC Controller driver software Both procedures are listed below Both procedures will remove the SGC2910

software from your system

Uninstall through Add/Remove Programs

1 You can use the “Add/Remove Programs” application included in yourWindows operating system to uninstall

the SGC2910Wireless PC Controller software

2 InWindows 98SE, ME, 2000, and XP you must click on the ‘START’ button in theWindowsTask Bar and

select ‘SETTINGS’ and ‘CONTROL PANEL’ Now click on the Add/Remove Programs icon

3 Once Add/Remove Programs has opened you should scroll down to ‘SGC2910Wireless PC Controller’ and

highlight it by clicking on it Now click on the ‘Remove’ button to open ‘SGC2910Wireless PC Controller

Uninstall Program’

4 Skip to step 6 in the UNINSTALL throughWIRELESS PC CONTROLLER SOFTWARE section below

Uninstall throughWireless PC Controller Software

1. During installation of the SGC2910 software a folder was created in your system’s program ﬁles directory.The

default location of the folder is“C:\Program Files\Philips\SGC2910Wireless PC Controller” A shortcut to the

PhilipsWireless PC Controller folder was also added to your programs folder in the“Start Menu”

2 To uninstallWireless PC Controller’s software, Click on the ‘START’ button in theWindowsTask Bar

3 Select the “PROGRAMS” folder on the “START MENU”

4 Scroll down to the “Philips” folder, then select the ‘SGC2910Wireless PC Controller’ folder

5 Select ‘uninstall’ The ‘SGC2910Wireless PC Controller Uninstaller’ will start

6 You have three selections available Automatic will automatically uninstall theWireless PC Controller

software. Custom will allow you to choose which modiﬁcations to make during uninstall. Repair will allow

you to reinstall the software if original ﬁles are corrupted.

Note: Custom uninstall is not recommended for the novice user

7 Select ‘Automatic’ and then click ‘NEXT’

8. Click ‘FINISH’ to begin the uninstall. Follow the onscreen prompts to ﬁnish the uninstall. During the uninstall

process, you may be prompted to disconnect your controller If this occurs, disconnect the controller and

press the ‘OK’ button If the message reappears, you should wait several seconds and then click the ‘OK’

button Some PCs require several seconds to detect the SGC2910 as disconnected

9. During the uninstall process aWindows prompt will ask,“Leave game proﬁles saved on your system?” If

you click the ‘Yes’ button the proﬁles you created will be backed up in “C:\Program Files\Philips\SGC2910

Game Backup Proﬁles” folder. If you click the ‘No’ button then all your created proﬁles will be deleted. It is

recommended that you click the ‘Yes’ button if you wish to reinstall the SGC2910 software or are upgrading

the SGC2910 software to a newer version.This option will allow you to backup your created proﬁles so they

can be loaded when the SGC2910 is reinstalled or upgraded

10. Once uninstall has ﬁnished, the‘SGC2910Wireless PC Controller Uninstall Program’ will automatically close.

11 Once installation has completed,Windows may prompt you to restart your PC If this occurs please select‘YES’

Download from Www.Somanuals.com. All Manuals Search And Download.

Vista 32 Addendum

Installation

Installation procedure for users ofWindowsVista

To properly install your SGC2910Wireless PC Controller, the controller must be connected to your USB port

ﬁrst. OnceWindowsVista has properly loaded the HID (human interface device) driver for the SGC2910 you

can begin software installation Carefully follow the steps below

Controller installation for users ofVista

1 Pull the retracting extension cable to desired play length

2 With your computer turned on andVista running, connect the SGC2910Wireless PC Controller’s USB

connector to one of the USB ports on your PC The SGC2910 should be connected to a USB port directly

on the PC

3 Vista will automatically detect the SGC2910Wireless PC controller upon connection It will be detected

as a pop up window on your system tray on the lower right of your screen The window will say

INSTALLING DEVICE DRIVER SOFTWARE Once install is complete, the following window appears “USB

HUMAN INTERFACE DEVICE Device driver software installed successfully The controller installation is

now complete and you can proceed to theVista instruction section of your manual

Software installation for users ofVista

Philips recommends installing the software under an administrator account for an easier installation procedure

Note: If using a standard user account you will need to enter an administrator’s password in the text box of

the window below to install the controller software due to the limited privileges of your standard user account

Once you enter the password click on the OK button and jump to step 5 of the Administrator user account

procedure and follow the remaining steps

Download from Www.Somanuals.com. All Manuals Search And Download.

Vista 32 Addendum

1 The SGC2910Wireless PC Controller should be connected to your PC before beginning software

installation underWindowsVista

2 Close down all programs that are currently running on your computer

3 Place the SGC2910 software CD into your CD-ROM drive If you have auto play enabled, the auto play

window will be displayed shortly after inserting the CD into your drive You may double click on ‘Setup for

PhilipsWireless PC Controller exe’ to begin the software installation

If auto play is not enabled, click on the Start button, select Computer Double click on the CD drive where

the SGC2910 CD is located This will launch the installer Follow the on screen instructions

Download from Www.Somanuals.com. All Manuals Search And Download.

Vista 32 Addendum

4 You will see the screen below Click on Allow

5. Once initialization has ﬁnished, the SGC2910Wireless PC Controller’ InstallWizard screen will appear.

6 After reading the notice, press the ‘NEXT’ button to begin the software installation You should now see

the screen indicating that the software is being installed on your system

7 Note: During installation ofWindowsVista the followingWindows security message will appear:

“Windows can’t verify the publisher of this driver software” Please click “Install this driver software

anyway”

8 InWindowsVista the SGC2910Wireless PC Controller should be connected to your Computer before

beginning software installation If the SGC2910 is not connected to your PC, the following message will

appear “Please Plug into theWireless PC Controller” If this message appears, plug the controller in to your

computer You may need to wait a few seconds forWindows to load the HID drivers Once completed,

you can click the “OK” button

Download from Www.Somanuals.com. All Manuals Search And Download.

Vista 32 Addendum

9 When the PC detects the SGC2910Wireless PC Controller, the following message will appear and ask you

to disconnect the controller Once you have disconnected the SGC2910, you should click the ‘OK’ button

If the message reappears you should wait several seconds and then click the ‘OK’ button Some PCs require

several seconds to detect the SGC2910 as disconnected Screen will say “Please unplug PhilipsWireless PC

Controller”

10 You can now click the ‘FINISH’ button at the following screen to complete the installation

11 Once installation is complete you can reconnect the SGC2910 to your PCs USB port

Uninstall

Software uninstall for users ofWindowsVista

Note: We recommend that you use un-install under an Administrator Account for the simplest process There

are two procedures for uninstalling the theWireless PC Controller driver software Both procedures are listed

below Both procedures will remove the SGC2910 software from your system

Uninstall through or change a program panel.

1 Click the start button in theWindows task bar and select Control Panel Click on uninstall a program If

viewed in ClassicView mode, click on the Programs and Features icon

2 Click on PhilipsWireless PC Controller to highlight it Click on uninstall / change button and the following

window appears

Download from Www.Somanuals.com. All Manuals Search And Download.

Vista 32 Addendum

3 Click on allow button to launch the uninstaller

4 You have three selections available Automatic will automatically uninstall the theWireless PC Controller

software. Custom will allow you to choose which modiﬁcations to make during uninstall. Repair will allow

you to reinstall the software if original ﬁles are corrupted. Note: Custom uninstall is not recommended

for the novice user

5 Select ‘Automatic” and then click ‘Next’

6. Click ‘FINISH’ to begin the uninstall. Follow the onscreen prompts to ﬁnish the uninstall. During the

uninstall process, you may be prompted to disconnect your controller If this occurs, disconnect the

controller and press the ‘OK’ button If the message reappears, you should wait several seconds and then

click the ‘OK’ button Some PCs require several seconds to detect the SGC2910 as disconnected

7. During the uninstall process aWindows prompt will ask,“Leave game proﬁles saved on your system?” If

you click the ‘Yes” button the proﬁles you created will be backed up in “C:/Users/Public/Public Documents/

SGC2910 Proﬁles/backup proﬁles.” folder. If you click the ‘No” button then all your created proﬁles will be

deleted It is recommended that you click the ‘Yes” button if you wish to reinstall the SGC2910 software

or are upgrading the SGC2910 software to a newer version This option will allow you to backup your

created proﬁles so they can be loaded when the SGC2910 is reinstalled or upgraded.

8. Once uninstall has ﬁnished, the ‘SGC2910Wireless PC Controller Uninstall Program’ will automatically

Uninstall thru the SGC2910 Software

1 Click on Start button Click on all Programs Click on Philips folder, click on SGC2910 folder and select

Uninstall and the following screen appears

Download from Www.Somanuals.com. All Manuals Search And Download.

Vista 32 Addendum

2 Click on Allow button The SGC2910Wireless PC Controller Uninstaller’ will start

3 You have three selections available Automatic will automatically uninstall the theWireless PC Controller

software. Custom will allow you to choose which modiﬁcations to make during uninstall. Repair will allow

you to reinstall the software if original ﬁles are corrupted. Note: Custom uninstall is not recommended for

the novice user

4 Select ‘Automatic’ and then click ‘NEXT’

5. Click ‘FINISH’ to begin the uninstall. Follow the onscreen prompts to ﬁnish the uninstall. During the

uninstall process, you may be prompted to disconnect your controller

If this occurs, disconnect the controller and press the ‘OK’ button If the message reappears, you should wait

several seconds and then click the ‘OK’ button Some PCs require several seconds to detect the SGC2910

as disconnected Note: For standard user accounts you can perform the uninstall process according to the

two previous procedures You will be required to enter an administrators password in the text box of the

window below if it appears during the uninstall

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

WindowsTroubleshooting

Below are our basic troubleshooting tips A more detailed F A Q is included on the SGC2910 Software’s main

directory The F A Q is in PDF format

• Make sure theWireless PC Controller is plugged ﬁrmly into your computer’s USB port.Try connecting the

Wireless PC Controller to a different USB port Connect theWireless PC Controller to a USB port on your

computer Do not connect through external hubs

• Make sure you have properly installed theWireless PC Controller through your operating system Open the

Gaming Options/Game Controllers applet to verify that theWireless PC Controller is installed properly and

operating correctly If the SGC2910 is not listed, try disconnecting the controller and plugging it into another

USB port You should also try uninstalling the SGC2910 software and then reinstalling You must follow the

steps correctly to ensure the software is installed properly

• Make sure you have installed theWireless PC Controller software.Vibration feedback and Proﬁle Editor will

not work unless the SGC2910 software is installed on your PC

• Make sure theWireless connection cable is fully extended before connecting the SGC2910 to your PC

• Do not extend/retract the connection cable while connected to a USB port as this can cause your software

title to lose connection with theWireless PC Controller If this occurs, wait several seconds and theWireless

PC Controller should automatically reconnect If this doesn’t work try unplugging the USB connector and

then reconnecting to the same USB port If this doesn’t work, you will need to exit the PC game and restart

it. If this occurs while you are using the SGC2910 with a game proﬁle, the loaded proﬁle will be lost.You

would then need to exit the PC game, restart the SGC2910 Proﬁle Editor and reload the proﬁle.You can then

restart your PC game

• If the software title stops responding to theWireless PC Controller, this indicates that the connection may

have been lost due to extending or retracting the connection cable Wait several seconds and theWireless

PC Controller should automatically reconnect If this doesn’t work try unplugging the USB connector and

then reconnecting to the same USB port

• If your software title freezes or hangs up due to extending or retracting the cable,you will need to try the following:

a Wait several seconds and theWireless PC Controller should automatically reconnect If this doesn’t

work try unplugging the USB connector and then reconnecting to the same USB port

b If the above tip does not work, then you will have to exit the software title Press Ctrl and Alt keys

down at the same time and then press the Del key Try closing down the software title If this does not

work you will need to restart your PC

• TheWireless PC Controller will only vibrate in software titles that support vibration Contact the game

manufacturer to verify You must have also loaded the SGC2910 software There are many different force

feedback and rumble effects available However, due to differences in software and hardware design, the

Wireless PC Controller may not support all effects.You will ﬁnd that the range of effects that theWireless

PC Controller supports will vary from game to game

• Check your software’s instruction manual to ensure it supports USB controllers If the PC game supports

USB controllers then you do not need to use the Proﬁle Editor. If it only supports the mouse and keyboard,

then you must use the SGC2910 Proﬁle Editor.

Download from Www.Somanuals.com. All Manuals Search And Download.

FAQs

Frequently Asked Questions (FAQ)

Installation Questions

------------------------------------------------------------------------------------------------------------

Question

The SGC2910 is not listed in Game Controllers/Gaming Options in theWindows Control Panel

Answer 1

The SGC2910 is not connected to the PC

Verify that the SGC2910 is plugged into a USB port directly on your PC Do not connect

the SGC2910 through USB hubs The SGC2910 should be connected directly to the PC’s USB ports

Answer 2

Try a different USB port

Try disconnecting the SGC2910 and plugging it into another USB port

Always connect the SGC2910 to a USB port on the PC

Answer 3

The SGC2910 was not properly installed

The SGC2910 may not be properly installed The installation steps will vary depending on your operating system

Verify that you performed the following

1. Windows ME and 98SE users must install the software ﬁrst and then plug the SGC2910 controller to a USB port.

2 Windows XP and 2000 users must plug the SGC2910 controller to a USB port and then they can install the

software

Try uninstalling the SGC2910 software according to the Uninstall instructions included in the SGC2910

instruction manual Please restart your PC once the software is uninstalled Then reinstall the controller and

software Please follow the steps according to your operating system

Download from Www.Somanuals.com. All Manuals Search And Download.

FAQs

Answer 4

Verify that the SGC2910 is properly installed

You can conﬁrm that the SGC2910 was properly installed by checking your device manager. Use the following

steps to access your device manager Make sure the SGC2910 is connected to a USB port

1 InWindows XP and 2000, right click on the “My Computer” icon on your desktop and then click on

“Properties” You should now see the “System Properties” window Click on the “Hardware” tab and then

click on the “Device Manager” button InWindows ME and 98SE, right click on the “My Computer” icon on

your desktop and then click on “Properties” You should now see the “System Properties” window Click on

the “Device Manager” tab

2 You should now see the device manager Verify that the device manager has the following devices listed (Note:

Attached is a screenshot of the entries that should be listed within your respectiveWindows operating system )

a InWinXP andWin2000, two new entries called “Philips Controller” and HID-compliant game

controller” will be listed under the Human Interface Device category InWinME, one new entry called

“Philips Joypad Mouse” will be listed under the Human Interface Devices category InWin98SE, one new

entry called “Philips Joypad Mouse” will be listed under the Human Input Devices (HID) category

b In allWindows operating systems, a new entry should be listed under the Keyboards category The new

entry should be “HID Keyboard Device”

c In allWindows operating systems, a new entry should be listed under the Mouse category The new

entry should be “HID-Compliant Mouse”

3 If all these entries are listed,then the SGC2910 has been properly installed If not,then you will need to uninstall

the SGC2910 software by following the Uninstall instructions listed within the SGC2910 Instruction Manual

Then reinstall the software and re-check the device manager to ensure the SGC2910 was properly installed

4 If the reinstall doesn’t work, you should check and verify that the device manager doesn’t have any

Unknown Devices listed Check the “Human Interface Device” and “Universal Serial Bus controllers”

categories If you see any Unknown Devices you should uninstall them You should right-click on the

“Unknown Device” to highlight it and click on “Uninstall” or “Remove” The entry should now be removed

from the device manager You should now try reinstalling the software according to the instructions for

your operating system

Download from Www.Somanuals.com. All Manuals Search And Download.

FAQs

------------------------------------------------------------------------------------------------------------

Question

When I plug my SGC2910 in andWindows runs through the detection process it asks me for myWindows CD I

do not have aWindows CD as it was not supplied with my computer so what do I do?

Answer 1

Check and verify that you have theWindows CD

If you have theWindows CD, you should insert it into your CD-ROM drive.The actual ﬁles thatWindows is

looking for when you are trying to install the SGC2910 are called Cab ﬁles and these are usually found in a

directory on yourWindows CD (Win98 if you haveWindows 98SE orWin9x if you haveWindows ME) You will

need to select the appropriate CD-ROM directory when asked byWindows.The necessary ﬁles will then by

copied to your PC

Answer 2

Win98SE and ME may require theWindows CD to complete the installation

Some PC manufacturers do not provide aWindows CD with their computer when they ship it to the customer

The actual ﬁles thatWindows is looking for when you are trying to install the SGC2910 are called Cab ﬁles and

these are usually found in a directory on yourWindows CD (Win98 if you haveWindows 98 orWin9x if you

haveWindows ME) However, if the manufacturer did not give you a CD then they may have made a backup of

these ﬁles somewhere on your hard drive.

The standard location to place these ﬁles is the C:\Windows\Options\Cabs directory or, sometimes, simply the

C:\Cabs directory.You can also try the C:\Windows\System32\Drivers directory for the location of the ﬁles.The

last possible location to place these ﬁles is C:\Win98 or C:\Win9x.

When theWindows installer for the SGC2910 asks you for yourWindows CD simply click OK - it will come

back to you saying that it can not ﬁnd a particular ﬁle and at the bottom of the window that comes up it will tell

you where it is trying to CopyThe Files From in a small window

Click in this window and delete whatever is in there and try replacing it with one of the above locations If

neither works then you should get in touch with the company who supplied your PC and ask them where your

Cab ﬁles are kept on your PC.

General Questions

------------------------------------------------------------------------------------------------------------

Question

How do I know if my PC game supports USB controllers?

Answer

Check the recommended system speciﬁcations on the game’s packaging. Check in the game’s instruction manual

or readme ﬁle.As a last resort you can contact the game publisher for technical support or see if a F.A.Q. can be

found on the publisher’s website

------------------------------------------------------------------------------------------------------------

Question

My SGC2910 does not work with my PC game

Answer 1

The PC game doesn’t support USB controllers

If the PC game doesn’t support USB game controllers you will need to use our Proﬁle Editor software and

create a custom proﬁle. Please consult the SGC2910 instruction manual.

Download from Www.Somanuals.com. All Manuals Search And Download.

FAQs

Answer 2

The PC game supports USB controllers but the controller still doesn’t work

The SGC2910 will not automatically work with PC games that support USB controllers You will need to

conﬁgure the SGC2910 to the game.The procedure for doing this varies from game to game.You need to

consult the game’s instruction manual or contact the game publisher for instructions

Usually, you will need to enter the PC game’s options or setup menu Within this menu there should be a

“controller conﬁguration” menu.You will need to change the input device to the connected game controller.

The default input device is usually the keyboard. Once this is completed you still need to conﬁgure/assign/map

the buttons and controls of the SGC2910 to the game.The “controller conﬁguration” menu should display all

the gameplay functions of the PC game and the default keys that control these functions For example, Jump =

Space key.Within this screen you should click on the gameplay function you wish to conﬁgure and then press

the desired button on the SGC2910.The exact procedure for conﬁguring the gameplay functions will vary from

game to game Consult the PC game’s instruction manual

------------------------------------------------------------------------------------------------------------

Question

My SGC2910 does not vibrate with my PC game

Answer 1

PC game doesn’t support vibration or force feedback

You need to verify that the PC game in question supports vibration or force feedback The majority of PC

games do not The SGC2910 will only work in PC games that support vibration or force feedback

You should check the game’s instruction manual and packaging Also check the website of the game publisher

and developer. If you still can not ﬁnd any information you should try contacting the game publisher.

Most PC games that only support the mouse and keyboard as input devices do not support vibration feedback

Please keep this in mind

Answer 2

PC game supports vibration feedback but the SGC2910 still doesn’t vibrate

Please make sure you have installed the SGC2910 software from the SGC2910 CD Please test the controller’s

vibration in the “Gaming Options/Game Controllers” applet found in theWindows Control Panel If the

SGC2910’s vibration feedback works when tested then the problem is with the PC game

There are many different force feedback and rumble effects available The supported effects will vary from game

to game Unfortunately, due to differences in software and hardware design, the PC game controller may not

support all the effects of the PC game.You will ﬁnd that the range of effects that theWireless PC Controller

supports will vary from game to game

------------------------------------------------------------------------------------------------------------

Question

Can I use the SGC2910 as a standard USB game controller games without

the Proﬁle Editor on PC games that support USB controller?

Answer

Yes you can

This is actually recommended by us.You should not use the Proﬁle Editor if your game supports USB game

controllers.Verify that you are using our default proﬁle and then conﬁgure the SGC2910 within the PC game’s

“controller conﬁguration” menu.

------------------------------------------------------------------------------------------------------------

Download from Www.Somanuals.com. All Manuals Search And Download.

FAQs

Question

My SGC2910 does not work in my MS-DOS based game

Answer

USB Devices do not function in MS-DOS

USB devices do not function under the MS-DOS environment

There is no way to get an MS-DOS game to recognize a USB device

------------------------------------------------------------------------------------------------------------

Question

I extended the cable of my SGC2910 and now the SGC2910 stopped working in my PC Game or my PC game froze

Answer

Do not extend or retract the connection cable of the SGC2910 while it is connected to a USB port

The cable length should be adjusted before you connect the SGC2910 to your USB port Adjusting the length

while the SGC2910 is connected to a USB port can cause your PC and game to lose connection with the

SGC2910 If this occurs, you can try the tips below

• If the PC Game stops responding to the SGC2910 coil, this indicates that the connection may have been

lost due to extending or retracting the connection cable Wait several seconds and the SGC2910 d should

automatically reconnect If this doesn’t work, you will need to exist the PC game and restart it If this occurs

while you are using the SGC2910 with a game proﬁle, the loaded proﬁle will be lost.You would then need to

exist the PC game, restart the SGC2910 Proﬁle Editor and reload the proﬁle.You then can restart your PC

game

• If your software title freezes or hangs up due to extending or retracting the cable you will need to try the

following Wait several seconds and the SGC2910 should automatically reconnect If this doesn’t work try

unplugging the USB connector and then reconnecting to the same USB port If the above tip does not work,

then you will have to exist the software title Press Ctrl and Alt keys down at the same time and then press the

Del key Try closing down the software title If this does not work you will need to restart your PC

Please do not extend or retract the SGC2910’s cable while it is connected to the USB port If you need to adjust

the length you should exit the PC game Unplug the SGC2910 from your USB port and adjust the cable to the

desired length. Plug the SGC2910 to your USB port and restart the PC game. If you were using a custom proﬁle

you will need to restart the SGC2910 Proﬁle Editor and reload the same proﬁle.

------------------------------------------------------------------------------------------------------------

Question

The Enter and Esc buttons on my SGC2910 do not work What do they do?

Answer

SGC2910 software must be installed

You must install the SGC2910 software If the software is not installed, these two buttons will not function The

Enter and Esc buttons will provide the same function of the Enter and Esc keys on your keyboard Enter and Esc

is usually used to navigate through the game menus

Download from Www.Somanuals.com. All Manuals Search And Download.

FAQs

Proﬁle Editor Software Questions

------------------------------------------------------------------------------------------------------------

Question

I received a“Can’t connect to SGC2910Wireless PC Controller Controller!” when I click on the SGC2910 icon

Answer

The SGC2910 is not connected to your PC’s USB port

Verify that the SGC2910 is directly connected to a USB port on your PC The SGC2910 must be connected in

order to use the Proﬁle Editor.

------------------------------------------------------------------------------------------------------------

Question

What does the proﬁle editor do?

Answer

The Proﬁle Editor allows the SGC2910 to emulate mouse and keyboard commands on the controller.This

makes the SGC2910 compatible with all computer games, even those that do not support controllers

------------------------------------------------------------------------------------------------------------

Question

Why aren’t my controls working correctly in my PC game?The SGC2910 acts erratically when I use the Proﬁle Editor.

Answer 1

The game may support USB game controllers

Check to verify if your PC game supports USB game controllers. If it does, you should not use the Proﬁle Editor

with the PC game.You should only use the default proﬁle when your PC game supports USB game controllers.

When you assign a keyboard key to the controller’s button, pressing that button when now send the controller

button command and the keyboard key command This isn’t a problem with PC games that only support the

mouse and keyboard This PC game will only register the keyboard key However, a game that supports USB

game controllers will register the controller button and keyboard key So the game will assume you are pressing

a controller button and keyboard key at the same time

If you desire to use a custom proﬁle with these games, you can check if the PC game has a joystick/controller

enable option. If it does, try disabling it and then see if you can use the Proﬁle Editor with the PC game.

Answer 2

You may have loaded the wrong proﬁle for your controller.

Check and verify that you are using the correct proﬁle for the game you desire to play.You should get into

the habit of checking the proﬁle before you start your PC game.This will ensure the SGC2910 is correctly

conﬁgured for the game you desire to play.

When you start your PC or reboot you must start the Proﬁle Editor and load the desired proﬁle.Also, if the

PC loses connection with your SGC2910 you will need to start the Proﬁle Editor and load the desired proﬁle.

Download from Www.Somanuals.com. All Manuals Search And Download.

FAQs

------------------------------------------------------------------------------------------------------------

Question

The SGC2910’s analog sticks provide poor control when mouse movement is assigned to the analog sticks The

mouse cursor moves too slow, too rapidly, or erratically

Answer

Adjust theVelocity and Acceleration Sliders

Open the Proﬁle Editor. Click the ‘Speed’ button the main menu to access the Mouse Speed Adjust sub-

menu You try adjusting theVelocity and Acceleration sliders to improve the mouse movement of the analog

sticks Once you make an adjustment try it out by turning the mouse movement mode on Unfortunately, due

to differences in the design of the analog stick and mouse you may never be able to achieve prefect mouse

movement

------------------------------------------------------------------------------------------------------------

Question

I want to use my SGC2910 in First Person Shooters games I want my SGC2910 to perform similarly to my

Playstation2 controller. How can I conﬁgure the SGC2910 to do this?

Answer

Most First Person Shooter games (FPS) are designed to only support the mouse and keyboard Most developers

consider the mouse and keyboard to provide the best control,so controller support is usually very basic or not

included

Currently, our Proﬁle Editor will not allow you to setup the SGC2910 so it emulates the Playstation2 control setup

in FPS game. Currently, only mouse movement can be assigned to the SGC2910 analog sticks.You can conﬁgure the

D-pad to theWASD keys and the right analog stick to mouse movement This will allow you to use the SGC2910

d-pad to control character movement and the right analog stick to control the camera movement

------------------------------------------------------------------------------------------------------------

Question

Can I assign a keyboard key to analog sticks of the SGC2910?

Answer

No you cannot

You can only assign mouse movement to the analog sticks

------------------------------------------------------------------------------------------------------------

Question

When I use the Proﬁle Editor, my SGC2910 does not vibrate with my PC game.

Answer

Most keyboard and mouse only PC games do not support vibration feedback

Unfortunately, most games that only support the mouse and keyboard due not support vibration feedback If

you must use the Proﬁle Editor with your PC game, it means the game most likely doesn’t support vibration

feedback. However, contact the game publisher for veriﬁcation.

------------------------------------------------------------------------------------------------------------

Download from Www.Somanuals.com. All Manuals Search And Download.

Techincal Support

If you require further assistance with yourWireless PC Controller,

please contactTech Service department through either of the following means:

Technical Support

ForTechnical Support send an email with the model number

of the product and a detailed description of your problem to:

Email: accessorysupport@philips com

FCCWarning

This equipment has been tested and found to comply with the limits for a Class B digital devise pursuant

to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful

interference in a residential installation This equipment generate, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications However, there is no guarantee that interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different form that to which the receiver is connected

• Consult the dealer on an experienced radio/TV technician for help

CAUTION:Any changes or modiﬁcations not expressly approved by the grantee

of this device could void the users authority to operate the equipment

Windows^®is a registered trademark of Microsoft^®

This product is not sponsored or endorsed by the companies mentioned herein

Warranty/Garantie/Záruka: www philips com/support

Download from Www.Somanuals.com. All Manuals Search And Download.

SGC2910

Speciﬁcations are subject to change without notice.

Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners

www philips com

Download from Www.Somanuals.com. All Manuals Search And Download.

Pelco Video Game Keyboard KBD5000 User Manual
Philips Air Cleaner AC4116 User Manual
Philips Car Video System 225P2 User Manual
Philips Flat Panel Television 14PT1686 01P User Manual
Philips Headphones SHE2637 User Manual
Pioneer Stereo Receiver VSX 919AH S User Manual
Planar Computer Monitor FWT1744NU User Manual
Pontiac Automobile 2006 Gto User Manual
Poulan Brush Cutter 530164264 User Manual
Poulan Lawn Mower 183748 User Manual