CONTENTS
1. CONNECTING YOUR TV-VIDEO COMBI . . . . . . . . . . . . . . 4
Connecting the cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Connecting a decoder or other equipment . . . . . . . . . . . . 4
Parental control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Switching the On-screen display (OSD) on or off . . . . . 19
Switching to 16:9 wide screen picture . . . . . . . . . . . . . . 19
Switching the remote control command . . . . . . . . . . . . . 20
Continuous playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Switch off function (SLEEP TIMER) . . . . . . . . . . . . . . . . . 21
Switch on function (WAKE-UP TIMER) . . . . . . . . . . . . . . 21
2. INSTALLING YOUR TV-VIDEO COMBI . . . . . . . . . . . . . . . . 5
Initial installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Allocating a decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Manual TV channel search . . . . . . . . . . . . . . . . . . . . . . . . . 6
Satellite receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 9. Before you call an engineer . . . . . . . . . . . . . . . . . . . . . . . 22
Special installation functions . . . . . . . . . . . . . . . . . . . . . . . 7
Automatic TV channel search . . . . . . . . . . . . . . . . . . . . . . 7
Allocating a channel number . . . . . . . . . . . . . . . . . . . . . . . 7
Delete a TV Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting the language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting the time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Technical terms used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
3. IMPORTANT NOTES FOR OPERATION . . . . . . . . . . . . . . . 9
SUMMARY OF USER GUIDE . . . . . . . . . . . . . . . . . . . . . . . . 9
User guide (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4. TV SET FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Selecting a TV programme . . . . . . . . . . . . . . . . . . . . . . . . 10
Selecting the picture setting (SMART PICTURE) . . . . . . 10
Automatic volume control (AVL) . . . . . . . . . . . . . . . . . . . . 10
Selecting the sound setting (SMART SOUND) . . . . . . . . 10
5. PLAYBACK FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Playing a cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Playing NTSC cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Tape position indication . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Searching for tape position with the picture (picture
search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Still picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Searching for tape position without the picture (wind
and rewind) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Instant View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Automatic search for a tape position (index search) . . 11
Picture interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Cleaning the video heads . . . . . . . . . . . . . . . . . . . . . . . . . 12
6. MANUAL RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Recording without automatic switch-off . . . . . . . . . . . . 13
Recording with automatic switch-off (OTR
one-touch-recording) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Protecting your recordings . . . . . . . . . . . . . . . . . . . . . . . . 13
Auto-assembling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7. PROGRAMMED RECORDING (TIMER) . . . . . . . . . . . . . . . 15
’VPS’ (Video Programming System) and ’PDC’
(Programme Delivery Control) . . . . . . . . . . . . . . . . . . . . . 15
Programming a recording (with ’VIDEOplus’) . . . . . . . . 15
Programming a recording (without ’VIDEOPlus’) . . . . . 16
How to check or change a TIMER . . . . . . . . . . . . . . . . . . 17
8. ADDITIONAL FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 18
How to read TELETEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3
Download from Www.Somanuals.com. All Manuals Search And Download.
&
OPERATING INSTRUCTIONS IN BRIEF
The remote control
qSr Volume: To regulate the volume
y
Volume off: To switch the volume on or off
TELETEXT e TELETEXT: To switch TELETEXT on/off
z
Previous programme number: To select the previous programme number
STANDBY m Switch off : To switch off set, interrupt menu
function, interrupt a programmed recording
(TIMER)
qP r Programme number: To select a programme number up or down
PLAY G Playback : To play a recorded cassette
SURROUND No function
H
Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning
SMART (green) SMART PICTURE: To show the preset picture
STOP h Pause/Stop: To stop the tape, except while a TIMER-recording is being made
settings
I
Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward
scanning
SMART #(yellow) SMART SOUND: To show the preset sound
settings
INDEX E Index search: In combination with
H
/
I
: to search for previous/next recording
AUDIO No function
on the cassette
0-9 Number buttons: 0 - 9
RECORD/OTR n Record: To record the programme selected
CLEAR Delete : To delete last entry or clear
STILL R Still picture: To stop the tape and show a still picture
programmed recording (TIMER)
CLEAR TELETEXT: To show hidden information
Coloured TELETEXT-buttons: To select TELETEXT pages directly
(red) Select page/chapter shown in red at the bottom of the screen
(green) Select page/chapter shown in green at the bottom of the screen
(yellow) Select page/chapter shown in yellow at the bottom of the screen
(blue) Select page/chapter shown in blue at the bottom of the screen
TIMER s TIMER: To make a manual TIMER
programming or to alter or clear a
programmed TIMER
MENU Menu : To call up or end main menu
OK Store/Confirm: To store or confirm entry
D
C
Select: Cursor left
Select: Cursor right
Select: One line up
Select: One line down
A
B
Download from Www.Somanuals.com. All Manuals Search And Download.
&
Front of the set
Back of the set
EXT.2 Scart socket: To connect a satellite receiver, a video recorder, etc.
EXT.1 Scart socket: To connect a decoder, a satellite receiver, etc.
Aerial input socket: To connect the aerial cable
8
Power switch : To switch off the set
Beware: When you switch the set off with the power switch, TIMER-recordings are not possible!
m
Standby : To switch off, interrupt a function, interrupt a programmed recording (TIMER)
2
P r/q Programme number : To select programme number up or down
Sr/q Volume: To regulate the volume
H
I
5
Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning
Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward scanning
Record: To record the programme selected
G
Playback : To play a recorded cassette
?
Pause/Stop, eject cassette: To stop the tape and during STOP eject the cassette
AUDIO Audio input socket left/right stereo
VIDEO Video input socket : To connect a camcorder or videogames
w
Headphones socket: To connect headphones
Download from Www.Somanuals.com. All Manuals Search And Download.
Special functions on your TV-VIDEO Combi
If a TV channel which transmits TXT/PDC is stored under programme number
’P01’, time and date will automatically be taken from the TXT/PDC information.
Philips has developed a system which produces the best possible playback
quality. It reduces disturbance on old, worn video cassettes, and emphasises
the detail on very good quality cassettes.
This function allows you to save the playback settings that suit you best. Select
your own personal settings for the type of film you are currently watching.
This function allows you to save the sound settings that suit you best. Select
your own personal settings for the type of film you are currently watching.
When you have plugged your TV-VIDEO Combi into the mains, you will be
welcomed with an OSD picture. All you have to do is follow the instructions in
the "intelligent help line" for the next step. Enjoy the Automatic TV channel
search/save function and the automatic time adjustment.
Automatic Volume Leveller. This prevents a sudden increase of the volume, for
example, during commercials.
We guarantee that your TV-VIDEO Combi will switch to the new millennium with
no problems whatsoever.
Simple programming system for TV-VIDEO Combis. Makes programming as easy
as making a telephone call. Simply enter the programme code which you will
find in your listings magazine.
The precision tape drive from Philips with rewind times of 100 seconds (E180)
and automatic tape length recognition.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1. CONNECTING YOUR TV-VIDEO COMBI
Important for the United Kingdom
Connecting the cables
This machine is fitted with an approved moulded 13 Amp plug.
To change a fuse in this type of plug, please follow these
instructions.
a Take off the fuse cover and take out the fuse.
b Put in a new fuse which should be a BS1362 5A, A.S.T.A.
or BSI approved type.
c Refit the fuse cover.
If the plug fitted is not suitable for your socket, cut it off and fit
another type.
If the plug you fit contains a fuse, it should be a 5Amp fuse. If
you fit a plug which does not need a fuse, make sure the fuse
on your fuse box is not greater than 5 Amps.
a Insert the aerial plug into the 2 socket.
b Insert the plug of the mains cable into the wall socket.
DNote: Please destroy the plug you have cut off so that it
cannot be used in a 13 Amp socket somewhere else.
c If the little red light at the front of the set is not alight,
please switch on the set. The power switch 8 is
located on the left side panel of the set.
How to connect a plug
The wires in the lead from the video recorder are coloured as
follows.
* Blue - ’neutral’ (’N’).
* Brown - ’live’ (’L’).
Connecting a decoder or other equipment
d Connect the blue wire to the terminal in the plug which is
You can also connect additional equipment, for instance, a
decoder, a satellite receiver or camcorder to the EXT.1
socket or a satellite receiver, camcorder to the EXT.2 socket.
marked with the letter ’N’ or coloured black.
e Connect the brown wire to the terminal in the plug which
E If you don’t connect a decoder, use the EXT.1 socket for
is marked with the letter ’L’ or coloured red.
connecting other equipment.
f Do not connect either of the wires to the terminal in the
plug which is marked with the letter ’E’, the symbol \or
coloured green or green and yellow.
Before you refit the plug cover, make sure that the grip at the
bottom of the plug is clamped over the plastic cover of the
lead, not just over the two wires.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2. INSTALLING YOUR TV-VIDEO COMBI
Initial installation
Allocating a decoder
a Open up the battery compartment of your remote control
Some TV stations will send coded TV channels, that you can
only watch when you use a decoder. You can connect such a
decoder (descrambler) to your TV-VIDEO Combi. With the
following function, the connected decoder will automatically
be activated for the TV programme you want to watch.
and place the batteries in it as shown in the picture.
a Choose the TV channel on which you wish to use the
decoder with the qP r button on the TV-VIDEO Combi
or the number buttons 0-9 on the remote control.
b Close the battery compartment.
b Press the MENU button on the remote control. The main
menu will appear.
c If you have connected the aerial to the TV-VIDEO Combi,
press the OK button.
c Select the line ’Installation’ with the B or
’Automatic TV channel search’ starts. This picture will
appear on the screen:
A buton and confirm with the C button.
d Select the line ’Manual store’ with the B or
A button and confirm with the C button.
e Select the line ’Decoder’ with the B or A button.
Searching...
CHANNELS FOUND:
MANUAL STORE
//////,,,,,,,,,,,,,,,,,,,,,
Channel/Frequency
FREQU.
Search
125
Fine tuning
Name edit
(,,,,,,n=,,,,,,$
xxx
Programme number
Decoder
01
OFF
Wait until all TV channels have been found. This can take
several minutes.
ã
«
Exit:
press MENU
DIf you have connected a decoder, you must install it
as described in the next section.
DIf you have connected a satellite receiver, please
f Select function ’ON’ with the D or C button. When
read the section ’satellite receiver’.
you select ’OFF’, the function will be switched off.
g Confirm with the OK button.
h To end, press the MENU button.
Your decoder has now been allocated to this TV channel.
i Press the MENU button.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
h If you want to change the automatic tv channel setting,
select the line ’Fine tuning’.
Manual TV channel search
With the D or C button you can vary the automatic tv
channel setting. Important: This re-tuning is only
necessary and useful in special cases, e.g.: when there
are stripes on the picture with cable-TV systems.
In certain cases the ’Automatic TV channel search’ may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
a Press the MENU button on the remote control. The main
i Press the OK button to store the TV channel.
menu will appear.
DIf you want to search for further TV channels, start
again at step e.
b Select the line ’Installation’ with the B or
A button and confirm with the C button.
j To end, press the MENU button.
c Select the line ’Manual store’ with the B or
A button and confirm with the C button.
Satellite receiver
You can receive channels from the satellite receiver via the
scart socket EXT.1 .
MANUAL STORE
To do this, select the channel number ’E1’ with the qP r
button. You will have to select the channels to be received by
the satellite receiver on the receiver itself.
Channel/Frequency
FREQU.
Search
125
Fine tuning
Name edit
(,,,,,,n=,,,,,,$
xxx
Programme number
Decoder
01
OFF
ã
«
Exit:
press MENU
d In the line ’Channel/Frequency’, select the
display for:
’FREQU.’: frequency
’C CH’: channel
’S CH’: special channel
e If you know the frequency or channel of the desired TV
channel, you can enter the data in line ’Search’ with
the digit buttons 0-9 .
DIf you don’t know the frequency or channel of the TV
channel of your choice, press the C button to start
the channel search.
f In the line ’Programme number’ select the
programme number you want e.g.: ’01’, using the D or
C button.
g If you want to change the TV channel name, press the
C button in line ’Name edit’.
E Select the character you want to change with the D or
the C button. Change the character with the B or the
A button. Select the next character in the same way.
E To confirm the information, press the OK button.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DAutomatic Channel Installation:
Special installation functions
Some cable companies or broadcasters offer the
possibility to install TV channels automatically with ’ACI’.
Information about the installation offered and how to
select it, will appear on the screen.
You can select one of the following installation functions in
order to adapt your TV-VIDEO Combi to your own specific
requirements.
This set will recognize and install TV channels with ’ACI’
automatically.
TV channels will be stored from programme number 1
onward.
Automatic TV channel search
If ’ACI’ cannot identify a TV channel, you can search for it
using the method as described in the section ’Manual TV
Channel Search’.
Your TV-VIDEO Combi will search for all TV channels.
If you want to start the automatic TV channel search again,
then follow the instructions below.
a Press the MENU button on the remote control. The main
Allocating a channel number
menu will appear.
b Select the line ’Installation’ with the B or
a Press the MENU button. The main menu will appear.
A button and confirm with the C button.
b Select the line ’Installation’ with the B or
c Select the line ’Autoinstall’ with the B or
A
A button and confirm with the C button.
button.
c Select the line ’Sort channels’ with the B or
d Press the C button. The ’Automatic TV channel search’
A button and confirm with the C button.
starts.
SORT CHANNELS
01 xxx
02 yyy
03 zzz
04 aaa
05 bbb
06 ccc
Searching...
CHANNELS FOUND:
//////,,,,,,,,,,,,,,,,,,,,,
ã
«
Exit:
press MENU
To move:
press OK
d With the B , A , D or C button, select the TV
channel to which you want to allocate a programme
number and press the OK button.
e When the TV channel search is complete,
’Installation comp.’ will appear on the
screen.
e With the B , A , D or C button, shift the TV
channel to the programme number you wish to allocate to
this TV channel and press the OK button.
How to search for a TV channel manually, you can read in the
section ’Manual TV channel search’.
f Repeat steps dto euntil you have allocated a
programme number to all the required TV channels.
g To end, press the MENU button.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Delete a TV Channel
Setting the time and date
a Press the MENU button on the remote control. The main
a Press the MENU button. The main menu appears.
menu will appear.
b Select the line ’Installation’ with the B or
b Select the line ’Installation’ with the B or
A button and confirm with the C button.
A button and confirm with the C button .
c Select the line ’Set clock’ with the B or
A
c Select the line ’Sort channels’ with the B or
button and confirm with the C button.
A button and confirm with the C button.
SORT CHANNELS
SET CLOCK
01 xxx
02 yyy
03 zzz
04 aaa
05 bbb
06 ccc
Time
15:36
1999
06
08
ON
Year
Month
Date
Smart clock
ã
«
Exit:
press MENU
ã
«
Exit:
press MENU
To move:
press OK
d Check the time in line ’Time’. If required, please change
the time with the 0-9 buttons on the remote control.
d With the B , A , D or C button, select the TV
e Check ’Year’, ’Month’ and ’Date’ in the same way.
channel you want to delete and press the CLEAR button.
You can switch between entry fields with B or
A
button. Confirm each entry with the OK button.
e Repeat step d, until you have deleted all the required
TV channels.
f To end, press the MENU button.
f To end, press the MENU button.
Automatic time and date setting
(SMART CLOCK)
DIf a television programme, which transmits TELETEXT, is
stored with programme number ’P01’, time and date will
be set automatically.
Setting the language
You can select the language for the on-screen display (OSD).
DTime will automatically be adjusted to winter time and
summer time.
a Press the MENU button on the remote control. The main
menu will appear.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’Installation’ with the B or
b Select the line ’Installation’ with the B or
A button and confirm with the C button.
A button and confirm with the C button.
c Select the line ’Language’ with the B or
A
c Select the line ’Set clock’ with the B or
A
button.
button and confirm with the C button.
d Select the line ’Smart clock’ with the B or
A
d Select your language with the D or C button.
button.
e To end, press the MENU button.
e Switch the function on with the D or C button.
f Confirm with the OK button.
g To end, press the MENU button.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3. IMPORTANT NOTES FOR OPERATION
SUMMARY OF USER GUIDE
The OSD menu offers the following functions. More details on each can be found in the appropriate chapter.
MAIN MENU
PICTURE
Picture
Sound
Brightness
Colour
(,,,,,,,,,,,,
(,,,,,,,,,,
(,,,,,,,
Setup
Contrast
Tape
Installation
Sharpness
Store as pref.
(,,,,,,,,
ã
«
Exit:
press MENU
ã
«
Exit:
press MENU
Chapter: ’TV SET FUNCTIONS’
User guide (OSD)
The OSD (On-screen display) shows the various functions in
the form of a menu on the television screen. You can then
choose the settings you require. There is a summary of the
menus on this page. The main button functions are displayed
in a help line along the bottom of the screen.
SOUND
Volume
(,,,,,,,,,,,,
Auto volume cont.
Store as pref.
OFF
YES
E To call up the menu: With the MENU button.
E To select a line: With the B or A button.
ã
«
Exit:
press MENU
Chapter: ’TV SET FUNCTIONS’
E To enter or change your selection: With the 0-9 , B or
A button.
E To cancel: With the MENU button.
E To save or confirm: With the OK button.
E To close the menu: With the MENU button.
SETUP
Parental control
Display
Format 16:9
VCR 1/2
OFF
MAX
Normal
VCR
1
ã
«
Exit:
press MENU
Chapter: ’ADDITIONAL FUNCTIONS’
E To confirm the messages in red on the screen: Press the
OK button.
E You can switch the machine on with the qP r , B ,
TAPE
A , z or 0-9 button or by putting in a cassette.
Tape speed
Tape counter
Repeat play
Jitter
Tracking
Cleaning
SP
USED
OFF
N. ACT.
(,,,,,,,,=,,,,,,$
ã
«
Exit:
press MENU
Chapter: ’PLAYBACK FUNCTIONS’
9
Download from Www.Somanuals.com. All Manuals Search And Download.
4. TV SET FUNCTIONS
Selecting a TV programme
Volume control
You can control the volume level with the qSr , D or
C button.
If you want to mute the sound temporarily (e.g.: during a
telephone call), press the y button on the remote control.
When you press the y button again, the sound will return at
its original volume level.
Select the required TV channel (=programme number) with the
qP r , B , A button or with the digit buttons 0-9 on the
remote control.
DIf you don’t know the programme number of the required
TV channel:
a Press the qP r button for more than 2 seconds.
The TV channel list appears on the screen.
Sound settings
b Select the required TV channel with the qP r
button.
a Press the MENU button. The main menu appears.
After 1 second the TV-VIDEO Combi will switch to
the selected programme number.
b Select the line ’Sound’ with the B or A button and
confirm with the C button.
Picture settings
a Press the MENU button. The main menu appears.
SOUND
b Select the line ’Picture’ with the B or A button
Volume
(,,,,,,,,,,,,
and confirm with the C button.
Auto volume cont.
Store as pref.
OFF
YES
ã
«
Exit:
press MENU
PICTURE
c Select the required line with the B or A button and
alter with the D or C button.
Brightness
Colour
(,,,,,,,,,,,,
(,,,,,,,,,,
(,,,,,,,
DTo store this setting as a standard setting, select
’YES’ in line ’Store as pref.’ and confirm
with the OK button.
Contrast
Sharpness
(,,,,,,,,
Store as pref.
ã
«
Exit:
press MENU
DTo call up the standard settings, switch the
TV-VIDEO Combi off and on again.
c Select the required line with the B or A button and
Automatic volume control (AVL)
alter with the D or C button.
E Switch on ’Auto volume cont.’, to activate the
automatic volume control. It minimises sudden changes
in TV volume when commercial spots are transmitted.
DTo store this setting as a standard setting, select
’YES’ in line ’Store as pref.’ and confirm
with the OK button.
Selecting the sound setting
(SMART SOUND)
Selecting the picture setting
(SMART PICTURE)
D’SMART SOUND’: Provides a choice of sound settings
D’SMART PICTURE’: Optimises all picture settings using a
from the remote control.
single button on the remote control.
E Press the SMART #(yellow) button repeatedly to select
E Press the SMART (green) button repeatedly to select the
the required sound setting.
required picture setting.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
5. PLAYBACK FUNCTIONS
Playing a cassette
Searching for tape position with the picture
(picture search)
a Put a cassette into the cassette slot.
a While a cassette is playing, press the H (reverse) or
I (forward) button once or several times.
b Press the PLAY G button.
b To stop at a certain picture, press the PLAY G button.
DDuring picture search, the picture quality may not be
c If you press the STOP h button once, the TV-VIDEO
Combi will switch to pause. To stop, press the STOP h
button again.
so good and there will be no sound.
Still picture
d To eject the cassette, press the ? button on the
TV-VIDEO Combi or press the STOP h button on the
remote control several seconds.
a Press the STILL R button. A still picture will appear on
the screen.
b Each time you press STILL R again, the picture will
DSome hired cassettes may have a poor picture or
poor sound quality. This is not a fault in your
machine. Please read `Picture interference´.
move on one step.
Searching for tape position without the
picture (wind and rewind)
DSome functions switch off automatically after a
while (for example, pause, still picture, picture
search). This helps to protect the cassette and
avoids wasting power.
a Stop the tape with the STOP h button.
b Press the H (reverse) or I (forward) button.
c To stop at a certain picture, press the STOP h button.
Playing NTSC cassettes
With this set you can play cassettes that have been recorded
on another video recorder in the NTSC standard (for example,
American cassettes).
Instant View
With this function you can switch to picture search during
wind and rewind.
DSome special features (for example, still picture) are not
possible while you are playing an NTSC cassette.
a If you hold the H (rewind) or I (wind) button
during wind or rewind, you will switch to picture search.
b When you release the button, the TV-VIDEO Combi will
Tape position indication
automatically switch back to rewind or wind.
DPress the OK button to display the current tape position.
Automatic search for a tape position (index
search)
DTo change the type of tape position display, proceed as
follows:
At the start of each recording, the TV-VIDEO Combi will write
an index code on the tape.
a During playback, press the MENU button.
a Press the INDEX E button. Press the I button to
select the next code mark or the H button for the
previous code mark.
b Select the line ’Tape’ with the B or A button and
confirm with the C button.
c Select the line ’Tape counter’ with the B or
b When the TV-VIDEO Combi finds the code mark, it will
A button.
automatically switch to play.
d With the D or C button select ’USED’ to check the
time used, or ’LEFT’ to check the time left on the tape.
e Confirm with the OK button.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture interference
Cleaning the video heads
If horizontal lines appear on the screen when you play a
cassette, you should clean the video heads.
When the picture quality is poor when you play a cassette,
please follow these instructions.
Tracking during playback
a During playback, press the MENU button.
b Select the line ’Tape’ with the B or A button and
confirm with the C button.
c Select the line ’Tracking’ with the B or
A
button.
d Hold the D or C button until the playback quality is at
a During playback, press the MENU button.
its best.
b Select the line ’Tape’ with the B or A button and
e Confirm with the OK button.
confirm with the C button.
c Select the line ’Cleaning’ with the B or
A
f To end, press the MENU button. This setting will remain
button.
until you remove the cassette.
d Press the OK button. ’CLEANING’ appears on the
Tracking during still picture
screen.
If the still picture vibrates vertically, you can improve the still
picture as follows:
e Wait a few seconds, until the message disappears and
then press the MENU button.
a During still picture, press the MENU button.
b Select the line ’Tape’ with the B button or A and
confirm with the C button.
c Select the line ’Jitter’ with the B or A button.
d Hold the D or C button until the picture quality is at
its best.
e Confirm with the OK button.
f To end, press the MENU button.
DPlease note, however, that interference may still
occur with poor quality cassettes.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
6. MANUAL RECORDING
Use ’Manual Recording’ to make a spontaneous recording (for
example, a programme currently being shown).
Recording with automatic switch-off
(OTR one-touch-recording)
E If you want to start and stop a recording manually, read
the section: ’Recording without automatic switch-off’.
a Put a cassette in the machine.
E If you want to start a recording manually but have it
stopped automatically, read the section: ’Recording with
automatic switch-off’.
b Use the qP r button to select the programme number
you want to record.
c Press the RECORD/OTR n button on the remote control.
When you are recording, the red recording light at the
front of the TV-VIDEO Combi will be alight.
Recording without automatic switch-off
a Insert a cassette.
d Press the RECORD/OTR n button again and again until the
display on the TV-VIDEO Combi shows the desired end
time or length of the recording.
b Use the qP r button to select the programme number
you want to record, for example, ’P01’.
DTo cancel this information, press the CLEAR button.
e Confirm with the OK button.
DProgramme number ’E1’ is provided for recording
from external sources (via the EXT.1 scart socket).
c To start recording, press the RECORD/OTR n button on the
remote control or 5 on the TV-VIDEO Combi.
When you are recording, the red recording light at the
front of the TV-VIDEO Combi will be alight.
f To end, press the MENU button.
Protecting your recordings
d Stop recording with the STOP h button.
DDuring a recording you can watch other TV
So that you don’t accidentally delete an important recording,
remove the special tab on the narrow side of the cassette with
a screwdriver or slide the special tab to the left. Later, if you
no longer want to protect your recording, you can seal the gap
again with sticky tape or slide the special tab to the right.
channels.
DTo switch off the screen, press the STANDBY m
button.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto-assembling
You can use the auto-assembling function to join individual
recordings without any major picture disturbance between
them.
a While the cassette is playing, search for the correct
position on the tape.
b Stop the cassette by pressing the STOP h button.
’Pause’ will appear on the TV screen.
c Now start recording as usual by pressing the
RECORD/OTR n button on the remote control.
Selecting the recording speed (SP or LP)
You can reduce the recording speed by half. This makes it
possible to record, for example, eight-hours instead of
four-hours on an ’E240’ (four-hour) cassette.
a Press the MENU button. The main menu appears.
b Select the line ’Tape’ with the B or A button, and
confirm with the C button.
c Select the line ’Tape speed’ with the B or
A
button.
d Select the required recording speed with the D or
C button.
D’LP’: Long Play = half recording speed (double
recording time).
’SP’: Standard Play = normal recording speed.
DThe picture quality will be adversely affected when
recording at half recording speed (’LP’).
DFor playback, the correct recording speed will
automatically be selected.
e Confirm with the OK button.
f To end, press the MENU button.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
7. PROGRAMMED RECORDING (TIMER)
Use programmed recording to automatically start and stop a
recording at a later date.
c Enter the entire PlusCode-programming number (up to 9
digits) printed in your TV guide next to the start time of a
TV programme.
To make a programmed recording, your TV-VIDEO Combi
needs to know:
For example, 5-234-89 or 5 234 89
Enter 523489 for the PlusCode-programming number.
If you make a mistake, you can clear your instructions
with the CLEAR button.
* the date you want to make the recording;
* the programme number for the TV channel you want to
record;
* the start and stop time of the recording;
* whether you want to use VPS or PDC;
* the recording speed (SP/LP).
VIDEOPLUS
The TV-VIDEO Combi stores all the information in a TIMER
block. You can programme up to 6 TIMER blocks a month in
advance.
CODE
REPEAT
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1
2
3
4
5
6(
(
(
ONCE
0-9
Store:
press OK
’VPS’ (Video Programming System) and
’PDC’ (Programme Delivery Control)
d In line ’REPEAT’ select daily or weekly programming
with the B or A button.
With ’VPS and PDC’, the TV station controls the start time and
the length of the recording. This means that the TV-VIDEO
Combi switches itself on and off at the right time even if a TV
programme you want to record begins earlier or finishes later
than expected.
’Mo-Fr’: If you want to make a recording every day
from Monday to Friday.
’Mo-Su’: If you want to make a recording every day
from Monday to Sunday.
Usually the start time is the same as the VPS or PDC time. But
if your TV guide gives a VPS or PDC time which is different to
the programme’s start time (for example, 20.15 and VPS 20.14),
you must enter ’20.14’ as the start time.
’WEEKLY’: If you want to make a recording every week
on the same day of the week.
’ONCE’: If you want to make only one recording.
If you want to programme a time that is different from the VPS
or PDC time, you must switch off VPS or PDC.
e Confirm with the OK button. Your programming details
will then appear on the TV screen.
Programming a recording (with ’VIDEOplus’)
TIMER PROGRAMMING
VPS
DATEPROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
All the information required for a programming is contained in
the PlusCode-programming number.
15 xxx
15:36 15:50
-
*
ONCE
ã
«
Exit:
press TIMER
Start:
press è
a Press the TIMER s button on the remote control.
DIf VIDEOPlus+ does not recognise the TV channel,
’P??’ will appear on the TV screen. Instead of
’P??’, you can select the programme number you
want with the number buttons 0-9 .
b Select the line ’Videoplus’ with the buttons B or
A and confirm with the C button.
DIf ’Code error’ appears on the TV screen, this
means you entered an incorrect PlusCode number
or the incorrect date. Correct your instructions or
end with the TIMER s button.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
DIf ’Daily error’ appears on the TV screen, the c Press the OK button.
date was incorrectly entered.
DUnder ’VPS/PDC’, use the B or A button to
TIMER PROGRAMMING
switch ’VPS or PDC’ on or off.
VPS
DATEPROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
DUnder ’LP’, use the B or A button to select the
recording speed ’SP’ or ’LP’.
15 xxx
15:36 15:50
-
*
ONCE
DThe TIMER lamp on the front of the set will light up
when one or more of the TIMER blocks are
occupied.
ã
«
Exit:
press TIMER
Start:
press è
DWhen you are recording, the red recording light at
the front of the TV-VIDEO Combi will be alight.
DIf the end of the cassette is reached during a
recording, the TV-VIDEO Combi automatically ejects
the cassette.
d Select the entry field with the D or C button.
e Enter information with the buttons B or A or with the
DIf you forget to load a cassette, ’No cassette’
digit buttons 0-9 .
will appear.
DUnder ’REP.’, use the B or A button to select
DIf you inserted a cassette with erase protection
when you want to start a recording, the cassette will
be ejected.
daily or weekly programming.
’Mo-Fr’: If you want to make a recording every day
from Monday to Friday.
’Mo-Su’: If you want to make a recording every day
from Monday to Sunday.
’WEEKL’: If you want to make a recording every
week on the same day of the week.
f Press the OK button.
g Confirm the message on the screen with the OK button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
’ONCE’: If you want to make only one recording.
DIf you want to make a TIMER-recordings from an
external source, use the B or A button to select
the setting `Record prepared` in the entry
field `PROG.`. Your TV-VIDEO Combi will now be
controlled via the scart cable.
h To end, press the TIMER s button.
Programming a recording
(without ’VIDEOPlus’)
DUnder ’LP’, use the B or A button to select the
recording speed ’SP’ or ’LP’.
DUnder ’VPS/PDC’, use the B or A button to
a Press the TIMER s button on the remote control.
switch ’VPS or PDC’ on or off.
b Select the line ’Timer programming’ with the
f Confirm with the OK button when the information is
buttons B or A and confirm with the C button.
correct.
g Confirm the message on the screen with the OK button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
TIMER PROGRAMMING
VPS
DATEPROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
DThe programming information has been stored in a
-- --
--:-- --:--
-
-
-----
TIMER block.
h To end, press the TIMER s button.
ã
«
Exit:
press TIMER
Start:
press è
i Make sure that the cassette you have put in can be
recorded on.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
How to check or change a TIMER
How to clear a TIMER
a Press the TIMER s button on the remote control.
a Press the TIMER s button on the remote control.
b Select the line ’Timer programming’ with the
b Select the line ’Timer programming’ with the
buttons B or A and confirm with the C button.
B or A button and confirm with the C button.
c Select the TIMER you want to check or change with the
c Select the TIMER you want to clear with the B or
B or A button and confirm with the OK button.
A button.
d Select the entry field with the D or C button.
d Press the CLEAR button.
e Change any information with the B or A button or
e Switch off with the TIMER s button.
with the 0-9 buttons.
DUnder ’LP’, use the B or A button to select the
recording speed ’SP’ or ’LP’.
f Confirm with the OK button.
g To end, press the TIMER s button.
h Make sure that the cassette you have put in can be
recorded on.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
8. ADDITIONAL FUNCTIONS
How to read TELETEXT
Parental control
E Press the TELETEXT e button to switch the TXT decoder
on and off. The TV-VIDEO Combi is now receiving the TXT
of the TV channel currently selected.
This function will prevent unauthorised use of your TV-VIDEO
Combi. All button-functions will be locked.
DYou can make programmed recordings while the parental
E To store the current page, press the OK button.
The next time you call up TELETEXT, you will
automatically turn to this page.
control is on.
a Press the MENU button. The main menu will appear.
E If you want to select an other page, type in the number of
the page with the digit buttons 0-9 . With the colour
buttons on your remote control you can directly select
the page numbers/chapters shown at the bottom of the
TV screen.
b Select the line ’Setup’ with the B or A button and
confirm with the C button.
Extra TELETEXT functions
To use the extra TELETEXT functions, press the MENU button,
when you are in TELETEXT.
SETUP
Parental control
ON
Display
MAX
E To enlarge the print, select the symbol ’g’ and confirm
Format 16:9
VCR 1/2
Normal
with the OK button.
VCR
1
E To switch off the TELETEXT decoder temporarily, select
ã
«
Exit:
press MENU
the symbol ’d’ and confirm with the OK button.
E To call up a TELETEXT sub-page:
c In the line ’Parental control’ select ’ON’ with
a Select the symbol ’}’ and confirm with the OK
the D or C button.
button.
b Enter the page number of the sub-page with the
d Confirm with the OK button.
0-9 -buttons (e.g.: 0123).
E To call up concealed information, select the symbol ’b’
e To end, press the MENU button.
and confirm with the OK button.
Keep the remote control in a safe place.
E To stop the pages from being turned over, select the
symbol ’f’ and confirm with the OK button.
f If you want to switch off the parental control, select
’OFF’ in line ’Parental control’.
E To show TELETEXT transparently, select the symbol ’-’
and confirm with the OK button.
DIf a button is pressed with activated parental
control, ’Parental Control active’ will
appear in the display.
DIf you want to eject a cassette with activated
parental control, press the STOP h button several
seconds.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the On-screen display (OSD) on
or off
Switching to 16:9 wide screen picture
If you are using a cassette with 16:9 wide screen recordings,
you can switch this function ’ON’. The TV-VIDEO Combi will
now automatically switch to wide screen.
You can switch the On Screen Display of the current operating
information on or off.
a Press the MENU button. The main menu appears.
a Press the MENU button. The main menu will appear.
b Select the line ’Setup’ with the B or A button and
b Select the line ’Setup’ with the buttons B or A and
confirm with the C button.
confirm with the C button.
SETUP
SETUP
Parental control
ON
Parental control
ON
Display
MAX
Display
MAX
Format 16:9
VCR 1/2
Normal
Format 16:9
VCR 1/2
Normal
VCR
1
VCR
1
ã
«
Exit:
press MENU
ã
«
Exit:
press MENU
c Select the line ’Format 16:9’ with the A or
B
c Select the line ’Display’ with the buttons B or
button.
A .
d Select one of the possibilities with the C or D button.
’NORMAL’ : Normal size picture.
d Select one of the options indicated with the buttons
C or D .
’EXTEND.’ : Extended size picture.
’COMPR.’ : 16:9 format picture.
’MAX’: OSD appears for a few seconds each time an
operating mode is selected and then disappears.
’MIN’: OSD is minimised.
’PROGR.’: the programme number is constantly
indicated.
DWhen you watch TV you can select between
’EXTEND.’ and ’NORMAL’.
’COUNTER’: the counter is constantly indicated.
e Confirm with the OK button.
e Confirm with the OK button.
f To end, press the MENU button.
f To end, press the MENU button.
DYou can use the OK button to show the current
operating mode on your TV screen.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the remote control command
Continuous playback
If you have two machines with the same remote control
You can automatically play a cassette again and again. When
command, you can change the remote control command of the the end of the tape or the recording has been reached, it will
handset and the remote control command of your TV-VIDEO
Combi.
rewind and start again.
a Press the MENU button. The main menu appears.
a Press the MENU button. The main menu appears.
b Select the line ’Tape’ with the B or A button.
b Select the line ’Setup’ with the menu buttons B or
Confirm with the C button.
A and confirm with the menu button C .
TAPE
Tape speed
Tape counter
Repeat play
Jitter
SP
USED
SETUP
OFF
N. ACT.
(,,,,,,,,=,,,,,,$
Parental control
ON
Tracking
Display
MAX
Cleaning
Format 16:9
VCR 1/2
Normal
VCR
1
ã
«
Exit:
press MENU
ã
«
Exit:
press MENU
c Select the line ’Repeat play’ with the B or
A
c Select the line ’VCR 1/2’ with the menu buttons
B
button.
or A .
d Select ’ON’ with the D or C button. If you select
d Select ’VCR 1’ or ’VCR 2’ with the menu buttons
’OFF’, the function will be switched off.
D or
C
e Confirm with the OK button.
e Confirm with the OK button.
f Press the MENU button.
f On the remote control, press the STOP h button and the
digit button 2 or 1 at the same time to switch the
remote control to ’VCR 2’ or ’VCR 1’.
g Confirm with the STOP h button.
h To end, press the MENU button.
DAfter you changed the batteries in the remote
control, it will switch back to ’VCR 1’.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch off function (SLEEP TIMER)
You can programme your set to switch off after a
predetermined period.
a Press the TIMER s button on the remote control.
b Select line ’Sleep timer’ with the B or
A
button and confirm with the C button.
c Determine the time left until switch off in 15 minutes
intervals using the B or A button.
DYou can switch the function off with the CLEAR
button on the remote control.
d Confirm with the OK button.
e To end, press the TIMER s button.
Switch on function (WAKE-UP TIMER)
You can programme your set to switch on at a predetermined
time.
a Press the TIMER s button on the remote control.
b Select line ’Wake-up timer’ with the B or
A
button and confirm with the C button.
c Select the entry field with the D or C button.
d Enter the information with the B or A button or with
the number buttons 0-9 .
e In the line ’ON’, switch the function on or off.
f Press the OK button.
g Press the TIMER s button.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Before you call an engineer
If, contrary to expectation, you have any problems using this
TV-VIDEO Combi, it may be caused by one of the reasons
mentioned below. You can also call the customer service
centrein your country.
Recording starts as soon as the satellite receiver or second
video recorder is switched on:
•
Externally controlled recording switched on: Switch off the
externally controlled recording.
You will find the phone number in the enclosed guarantee
leaflet.
’Smart Clock’ setting does not work:
•
You have stored a TV channel on programme number ’P01’ that
does not transmit TELETEXT: On ’P01’ store a TV channel that
transmits TELETEXT.
Poor TELETEXT reception: On ’P01’ store a TV channel with
good TELETEXT reception.
You have not activated the Smart Clock function: Switch the
function ’ON’.
Your TV-VIDEO Combi does not respond to any button being
pressed:
•
•
•
•
There is no power supply: check the power supply
A programmed recording is currently being made: cancel the
programmed recording with the STANDBY m button.
Parental control is on: switch the parental control off.
Continuous playback is on: switch the continuous playback off.
There is a technical problem: switch off with the 8 power
switch for 30 seconds, then switch it on again.
•
•
•
You hear a very short and soft noise coming from your
TV-VIDEO Combi at 3:00 at night:
•
’Smart Clock’ is checking the time: Swith off the Smart Clock
function.
Cassette is jammed in the TV-VIDEO Combi:
•
Don’t use force. Switch off with the 8 power switch for a
TELETEXT does not start at page 100:
moment.
•
You have stored a different preferred page: Store page 100 as
preferred page.
Remote control does not work:
•
Remote control not pointed toward the TV-VIDEO Combi: point it
at the TV-VIDEO Combi.
•
•
Batteries have run out: change the batteries.
You have given the wrong remote control command: read
’Switching remote control command’ in chapter ’Additional
functions’.
Technical terms used
Current tape position : The part of the tape currently being
played.
No picture when you play a cassette:
External source : A device connected via a socket (for
example, scart socket) which is transmitting audio/video
signals to the TV-VIDEO Combi.
•
There is no recording on the cassette: change the cassette.
Poor picture quality when you play a cassette:
Index marking : A marking which is automatically made on the
tape at the beginning of every recording. This marking
(recording ID) can be searched for with the Index search
function.
•
•
The cassette badly worn or of poor quality: use new cassette.
Tracking is not properly adjusted or the video heads are dirty:
turn to chapter ’PLAYBACK’ and read the section ’Picture
interference’.
Scart cable : Also known as a Euro-AV cable. This standard
cable is an easy method of connecting various TV, audio and
video devices, such as a HIFI and Dolby Surround set, video
recorder, DVD player, SAT receiver, decoder, computer and
similar devices. Other signals in addition to audio and video
signals can be transmitted on it.
TV system : There are various systems for transmitting
television signals, for example, PAL, SECAM, PAL BG, SECAM
DK, SECAM L/L, NTSC etc. The system used by your television
depends on which country you are in.
•
You are playing a cassette with a LongPlay recording on it:
Excellent picture quality is only guarateed with recordings made
in StandardPlay recording speed.
The TV-VIDEO Combi will not record:
•
The TV channel you want to record is not stored or you selected
the wrong programme number: check TV channels stored.
You have loaded a cassette which cannot be recorded on: undo
the erase protection on the cassette.
•
Programmed recording does not work:
•
•
TXT : Also known as Teletext, Fasttext, Videotext, FLOF etc.
OTR : One touch recording. This function enables you to select
the switch-off time in intervals of 30 minutes.
You have not set the TIMER properly: check the TIMER blocks.
You have programmed the wrong time or date: check time and
date.
•
•
You have put in a cassette that cannot be recorded on: undo the
erase protection on the cassette.
’PDC’ or ’VPS’ switched on but ’PDC/VPS time’ wrong: enter PDC
or VPS time exactly to the minute. Have the aerial checked.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
|