Philips TV VCR Combo 19MDTR20 User Manual

T2132_1102_0102_EN1_0303 3/3/05 5:39 PM Page 1 (Black plate)

User Manual

S M A R T . V E R Y S M A R T .

27MDTR20

20MC4304

19MDTR20

COLOR TV WITH BUILT-IN VCR AND DVD PLAYER

Magnavox vous remercie de

votre confiance.

Thank you for choosing

Magnavox.

Gracias por escoger

Magnavox

Need help fast?

Besoin d'une aide

rapide?

Les Guide d'utilisation rapide et Manuel de

l'utilisateur regorgent d'astuces destinées à

simplifier l'utilisation de votre produit Magnavox.

Toutefois, si vous ne parvenez pas à résoudre

votre probléme, vous pouvez accéder à

notre aide en ligne à l'adresse

Necesita ayuda

inmediata?

Lea primero la GuÌa de uso rápido o el

Manual del usuario, en donde encontrar·

consejos que le ayudarán a disfrutar

plenamente de su producto Magnavox.

Si después de leerlo aún necesita ayuda,

consulte nuestro servicio de

Read your Quick Use Guide and/or

Owner's Manual first for quick tips

that make using your Magnavox product

more enjoyable.

If you have read your instructions

and still need assistance,

you may access our online help at

asistencia en lÌnea en

www.magnavox.com

ou formez le

www.magnavox.com

or call

www.magnavox.com

o llame al teléfono

1-800-661-6162 (Francophone)

1-800-705-2000 (English speaking)

Veillez à avoir votre produit à

portée de main.

1-800-705-2000

while with your product.

1-800-705-2000

y tenga a mano el producto.

27MDTR20

20MC4304

19MDTR20

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 3

Safety and General Information 3

Safety Precautions

● Do not stand the unit up vertically. Install the unit in a horizontal and stable position.

● Be sure to remove the disc and unplug the AC power cord from the output before carrying the unit.

Warning:To prevent fire or shock hazard, do not expose this equipment to rain or moisture.

Federal Communications Commission (FCC) Warning:Any unauthorized changes or

modifications to this equipment void the user’s authority to operate it.

Laser Safety: This unit employs a laser. Only a qualified service person should remove the cover or

attempt to service this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION:VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO

NOT STARE INTO BEAM.THE BEAM IS LOCATED INSIDE, NEAR THE DECK MECHANISM.

Special Information for Canadian Users: This Class B digital apparatus complies with Canadian

ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Radio/TV Interference: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable

protection against harmful interference in a residential installation.This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and the receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

prohibited.“This product incorporates copyright protection technology that is protected by U. S. patents and

other intellectual property rights. Use of this copyright protection technology must be authorized by

Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by

Macrovision. Reverse engineering or disassembly is prohibited.”

Note to the CableTV System Installer:This reminder calls the Cable TV system installer’s

attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper

grounding – in particular, specifying that the cable ground shall be connected to the grounding system of the

building, as close to the point of cable entry as possible.

Declaration of Conformity

Model Number:

27MDTR20

20MC4304

19MDTR20

Magnavox

Trade Name:

Responsible Party: Philips Consumer Electronics North America

P.O. Box 671539

Marietta, GA 30006-0026

1-800-705-2000

Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 4

4 Safety and General Information (cont’d)

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

B. Objects have fallen, or liquid has been spilled into the

appliance; or

1. Read these instructions.

2. Keep these instructions.

C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally or

exhibits a marked change in performance; or

3. Heed all warnings.

4. Follow all instructions.

5. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance

with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

9. Do not defeat the safety purpose of the polarized or

groundingtypeplug.A polarized plug has two blades with one wider

than the other.A grounding type plug has two blades and third

grounding prong.The wide blade or third prong are provided for

your safety.When the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where

they exit from the apparatus.

E. The appliance has been dropped, or the enclosure damaged.

17. Tilt/Stability - All televisions must comply with recommended

international global safety standards for tilt and stability properties

of its cabinet design.

• Do not compromise these design standards by applying excessive

pull force to the front, or top, of the cabinet which could

ultimately overturn the product.

• Also, do not endanger yourself, or children, by placing electronic

equipment/toys on the top of the cabinet. Such items could

unsuspectingly fall from the top of the set and cause product

damage and/or personal injury.

18. Wall or Ceiling Mounting -The appliance should be mounted

to a wall or ceiling only as recommended by the manufacturer.

19. Power Lines - An outdoor antenna should be located away from

power lines.

20. OutdoorAntenna Grounding - If an outside antenna is

connected to the receiver, be sure the antenna system is grounded

so as to provide some protection against voltage surges and built

up static charges.

11. Only use attachments/accessories specified by the manufacturer.

12.

Use only with a cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the

Section 810 of the National Electric Code,ANSI/NFPA No. 70-

1984, provides information with respect to proper grounding of

the mast and supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding connectors,

location of antenna-discharge unit, connection to grounding

electrodes, and requirements for the grounding electrode. See

Figure below.

cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for

long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into apparatus, the apparatus has been exposed

to rain or moisture, does not operate normally, or has been

dropped.

15. This product may contain lead and mercury. Disposal of these

materials may be regulated due to environmental considerations.

For disposal or recycling information, please contact your local

authorities or the Electronic Industries Alliance: www.eiae.org

16. Damage Requiring Service -The appliance should be serviced

by qualified service personnel when:

21. Object and Liquid Entry - Care should be taken so that objects

do not fall and liquids are not spilled into the enclosure through

openings.

a)Warning:To reduce the risk of fire or electric shock, this

apparatus should not be exposed to rain or moisture and objects

filled with liquids, such as vases, should not be placed on this

apparatus.

22. Battery Usage CAUTION -To prevent battery leakage that

may result in bodily injury, property damage, or damage to the

unit:

• Install all batteries correctly, with + and - aligned as marked on

the unit.

• Do not mix batteries (old and new or carbon and alkaline, etc.).

• Remove batteries when the unit is not used for a long time.

A. The power supply cord or the plug has been damaged; or

Note to the CATV system installer:This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC

that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding

system of the building, as close to the point of cable entry as practical.

Example of Antenna Grounding

as per NEC - National Electric Code

GROUND CLAMP

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT ^{(NEC SECTION 810-20)}

GROUNDING CONDUCTORS ^{(NEC SECTION 810-21)}

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

ELECTRIC SERVICE EQUIPMENT

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 5

Table of Contents 5

General Information

Disc Features

Safety and General Information . . . . . . . . . . . . . .3-4

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . .5

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Playable Discs andVideotapes . . . . . . . . . . . . . . . . .7

DVD Disc Menus,Title Menus . . . . . . . . . . . . . . . .52

Fast Forward/Reverse Search . . . . . . . . . . . . . . . . .53

Title/Chapter Playback, SpecificTime Playback . . . .54

Track Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Paused and Step-by-Step Playback, Resume On . . .56

Repeat,A-B Repeat . . . . . . . . . . . . . . . . . . . . . . . .57

Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Subtitles, Camera Angles . . . . . . . . . . . . . . . . . . . .59

Slow Motion, Zoom . . . . . . . . . . . . . . . . . . . . . . . .60

Audio Language, Stereo Sound . . . . . . . . . . . . . . . .61

On-Screen Displays . . . . . . . . . . . . . . . . . . . . .62-63

Black Level,Virtual Surround, Initializing . . . . . . . . .64

Random Playback, Program Playback . . . . . . . . . . . .65

MP3/JPEG Playback . . . . . . . . . . . . . . . . . . . . . .66-67

Initial Setup and Use

Before Using theTV/VCR/DVD . . . . . . . . . . . . . . .8

Hooking Up theTV/VCR/DVD . . . . . . . . . . . . .9-10

Optional Connections . . . . . . . . . . . . . . . . . . . . . .11

WatchingTV . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Playing aVideotape . . . . . . . . . . . . . . . . . . . . . . . .13

Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Description of Controls

Remote Control Buttons . . . . . . . . . . . . . . . . .15-16

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

DVD Setup Features

Language Settings . . . . . . . . . . . . . . . . . . . . . . . .68-69

Display Settings . . . . . . . . . . . . . . . . . . . . . . . . .70-71

Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Parental Password . . . . . . . . . . . . . . . . . . . . . . .73-74

Parental Levels . . . . . . . . . . . . . . . . . . . . . . . . .75-76

Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77-78

TV Settings

Menu Language,Auto Channel Programming . . . .19

Adding/Deleting Channels . . . . . . . . . . . . . . . . . . .20

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . .21-24

Daylight-SavingsTime . . . . . . . . . . . . . . . . . . . . . . .25

Status Displays, Picture Controls . . . . . . . . . . . . . .26

InformationYou May Need

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . .80-81

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

LimitedWarranty . . . . . . . . . . . . . . . . . . . . . . . . . .83

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

Recording

Videotape Recording . . . . . . . . . . . . . . . . . . . . . . .27

One-Touch Recording . . . . . . . . . . . . . . . . . . . . .28

Timer Recording . . . . . . . . . . . . . . . . . . . . . . .29-32

Timer Recording Auto Return . . . . . . . . . . . . . . .33

Rerecording (Tape Duplication) . . . . . . . . . . . . . . .34

Videotape Features

Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . .35

Rental Playback . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Zero Return, SleepTimer . . . . . . . . . . . . . . . . . . .37

Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Videotape Playback Features . . . . . . . . . . . . . . . . .40

Automatic Operation Features . . . . . . . . . . . . . .41

AdditionalTV Features

Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . .42

SettingV-Chip . . . . . . . . . . . . . . . . . . . . . . . . .43-48

Multi-ChannelTelevision Sound (MTS) . . . . . . .49-51

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 6

6 Introduction

Welcome to yourTV/VCR/DVD owner’s manual.

This manual describes the 27MDTR20, 20MC4304 and 19MDTR20.These three models are different in size and

design, but operate identically.The 20MC4304 is illustrated in this manual.

Features -TV/VCR

• Automatic Channel Setup

• Automatic Head Cleaner

• AutomaticTracking Adjustment

• Closed Captions

• One-Touch Recording

• Real-TimeVideotape Counter

• Rental Playback

• Repeat Playback

• Daylight-SavingsTime

• SleepTimer

• Timer Recording

• Time Search

• V-Chip (Parental Controls)

• Zero Return

• English, Spanish or French Setup Menus

• Forward/Reverse Searching; Still

• High Quality (HQ) System

• Index Search

Features - Discs

• Audio Language choices *

• Program Playback

• Bit Rate display

(Audio CD, MP3, JPEG)

• Random Playback

• Camera Angle *

• Dolby Digital Sound *

• Dual Playback

(Audio CD, MP3, JPEG)

• Repeat (A-B, Chapter,Title,Track, Group, Disc)

• Search (Title/Chapter,Time,Track)

• Subtitles *

• Virtual Surround

• Zoom

• Dynamic Range Control

• Fast/Paused/Slow/Step-by-Step Playback

• JPEG Playback

• Markers

• MP3 Playback

• Parental Controls *

* If available on the disc

DVD Disc Menus...

Some explanations in this manual describe DVD disc menus. DVD manufacturers set the menus, which vary

among DVDs. Not all DVDs have menus. If the DVD has a menu, access it by pressing DISC MENU on the

remote control.

Details are on page 52.

Setup Menus...

Some instructions explain how to use the setup menus of theTV/VCR/DVD.There are two setup menus: one

for theTV/VCR features while the unit is inTV/VCR mode, and one for the disc features while the unit is in

DVD mode.Access the setup menus by pressing SETUP on the remote control.

While inTV/VCR mode, you can select only theTV/VCR SETUP menu.

In DVD mode, you can select both theTV/VCR SETUP menu and the SETUP menu for the unit’s DVD player.

Press SETUP once to select theTV/VCR SETUP menu. Press SETUP twice to get to the DVD player’s SETUP

menu.

Even if you set a DVD feature in the unit’s SETUP menu, it will not be available if the current disc does not

include that feature.

Available Disc Features...

All features described in this manual are not available on every disc. If the feature is not available

on the disc, you cannot use theTV/VCR/DVD to make it available.

An “X” will appear in the top right corner of the screen if you try to access a feature that is not

available.

For example, some features are available only during playback, while others are available only if

playback is stopped. If you cannot access a feature, try stopping or starting playback, then try the

feature again.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 7

Playable Discs and Videotapes 7

Playable Discs

The DVD player of thisTV/VCR/DVD will play many types of discs, including DigitalVideo Discs (DVDs) and

Audio Compact Discs (CDs). It will play MP3 and JPEG files as well.

To play a DVD, make sure it meets the requirements for Region Codes and Color Systems as described

below. Discs that have the following logos will play on the DVD player of this TV/VCR/DVD. Finalize CD-R,

CD-RW, DVD+R and DVD+RW Discs before playing them in the TV/VCR/DVD.

● A disc may not play properly if the disc’s recorded area is less than 55mm across.

● Do not glue paper or put stickers on to the disc.These may damage the disc, and the TV/VCR/DVD may

not read it correctly.

DVD: Prerecorded Digital

Video Discs

CD-R/RW: Compact Disc

Recordable/Rewritable.

CD-Rs can be recorded on

only once.

CD-RWs can be recorded

on multiple times.

Recordable

ReWritable

Audio CDs

Recordable

ReWritable

DVD+R: DVD Recordable.

DVD+Rs can be recorded

on only once.

MP3: Digital audio files

recorded on a CD-R or

CD-RW

DVD+RW: DVD Rewritable.

DVD+RWs can be recorded

on multiple times.

Video CDs

is a trademark of DVD Format/Logo Licensing Corporation.

This unit is not compatible with Multiple Bit Rate

(MBR: a file that contains the same content encoded at several different bit rates).

Region Codes

ThisTV/VCR/DVD has a Region One (1) DVD player. DVDs must be labeled for ALL regions or for Region 1 in

order to play on the unit.You cannot play DVDs that are labeled for other regions. Look for the symbols below on

your DVDs. If these region symbols do not appear on your DVD, you cannot play the DVD in thisTV/VCR/DVD.

The number inside the globe refers to a region of the world. Region 1 represents the United States, Canada,

upper regions of North America, Bermuda, the U.S.Virgin Islands and small regions near Australia.

A DVD labelled for a specific region can only play on DVD players with the same region code.

Color Systems

DVDs are recorded in different color systems throughout the world.The most common color systems are NTSC

(which is used primarily in the United States and North America), PAL and SECAM.

The DVD player of this unit uses NTSC, so DVDs you play must be recorded in the NTSC color system.You cannot

play DVDs recorded in other formats.The color system of the DVD may be listed on the DVD or on the disc case.

Unacceptable Discs

If you insert an unacceptable type of disc, a Disc Error message may appear on the TV screen.The following

discs will not play on this DVD player.

• CD-ROM

• DVD-RAM

• DVD-ROM

• DVD-Audio

• Compact Disc-Interactive (CD-I)

• Unfinalized Discs

• Video Single Disc (VSD)

• DVD contains MP3 or JPEG files

• DVD/CD contains Windows Media Audio

On the following disc, the sound may not be heard.

• Super Audio CD - Only the sound on the CD layer can be heard. The sound on the high-density Super

Audio CD layer cannot be heard.

Videotapes

Magnavox recommends you use only videotapes that have the

mark. Other videotapes may have poor

picture quality and cause excessive deposits on the video heads.The warranty may not cover such damage.

TheVCR of this TV/VCR/DVD has a High Quality (HQ) system and is compatible with existingVideo Home

System (VHS) equipment.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 8

8 Before Using theTV/VCR/DVD

Remote Control Battery Installation

Remove the battery compartment lid on the

bottom of the remote control. Slide the lid down and

off. Follow the direction of the arrow on the lid.

Place two AA batteries inside the battery

compartment. Align the and ends as indicated.

–

Replace the battery compartment lid.

1 2 3

Battery Safety

Battery Usage CAUTION - To prevent battery leakage that

may result in bodily injury, property damage or damage to the

unit:

● Install ALL batteries correctly, with the + and markings

–

on the battery aligned as indicated on the unit;

● Do not mix batteries, for example, old with new or carbon

with alkaline; and

● Remove batteries when the unit will not be used for a long

time.

Recording Prevention

Videotapes have record tabs to ensure you do not erase

recordings accidentally.

To prevent accidental recording, break off the

tab with a screwdriver.

To record again, cover the hole with cellophane

tape.

1 2

Using the Remote Control

Helpful Hint

● Point the remote control at the remote sensor on the

front of the TV/VCR/DVD. Details are on page 17.

● Do not put objects between the remote control and the

TV/VCR/DVD.

• Your new product, its packaging

and this manual contain

materials that can be recycled

and reused. Specialized

companies can recycle your

product to increase the amount

of reusable materials and to

minimize the amount that

needs to be properly disposed.

Your product uses batteries

that should not be thrown

away when depleted but should

be disposed of as small

TV/VCR/DVD Maintenance

● Remove any light adhesive stick-on notes from the video

cassette before putting the cassette in the TV/VCR/DVD.

Removable labels can jam the TV/VCR/DVD.

● The TV/VCR/DVD requires periodic maintenance to

maintain its excellent performance.This TV/VCR/DVD has

an internal head cleaning system. However, the video heads

will eventually require cleaning or replacement. Only an

authorized service center should perform this service.

chemical waste.

Please find out about the local

regulations on disposal of your

old product, batteries, manual

and packaging when you

replace existing equipment.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 9

Hooking Up theTV/VCR/DVD 9

Hook up yourTV/VCR/DVD using

one of the connections shown.

Connect a Cable TV

signal or an antenna to

the ANT(enna) Jack.

Hooking UpYourTV/VCR/DVD

with a CableTV Signal or

Outdoor Antenna

AUDIO OUT

COAXIAL

ANT.

Hooking UpYourTV/VCR/DVD

with a Cable Box/Satellite Receiver

To view any channel, set the TV/VCR/DVD to

the output channel (channel 03 or 04) of the

Cable Box/Satellite Receiver.Then, select

channels at the Cable Box/Satellite Receiver.

Connect the Cable TV

or Satellite signal to the

IN Jack on the Cable

Box/Satellite Receiver.

OUT

Connect an

RF coaxial cable

(not supplied) to

the OUT Jack on

the Cable Box/

Satellite Receiver

and to the

ANT(enna) Jack

on the

TV/VCR/DVD.

AUDIO OUT

COAXIAL

ANT.

Your Cable Box/Satellite Receiver may have Audio andVideo Out jacks instead of the single

Antenna Out jack (RF coaxial or 75 ohm) shown here.

If so, connect Audio andVideo cables to the Audio/Video Out jacks of the Cable Box/Satellite

Receiver and to the AUDIO/VIDEO In jacks on the front of the TV/VCR/DVD.

Press SELECT on the remote to set the TV/VCR/DVD to AUX, not channel 3 or 4. Select

channels you want to watch or record at the Cable Box/Satellite Receiver as usual, leaving the

TV/VCR/DVD on AUX.

Instructions continue on the next page.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 10

10 Hooking Up theTV/VCR/DVD (cont’d)

Instructions continued from the previous page.

Indoor Antenna

Hooking UpYourTV/VCR/DVD

with an Indoor Antenna

(not supplied,

example only)

To install an indoor antenna or “rabbit ears”

(not supplied), connect the antenna wire to the

ANT(enna) Jack on the back of the

TV/VCR/DVD as shown. Extend the antenna

and adjust its length, direction and angle for the

clearest picture.

ANT.

AUDIO OUT

COAXIAL

ANT.

Hooking UpYourTV/VCR/DVD to

AnotherVideo Source

(VCR, DVD player, Camcorder, etc.)

You may need this connection if you want to

play discs or tapes on other equipment but

watch them on the TV/VCR/DVD. Press

SELECT on the remote to select AUX at the

TV/VCR/DVD.When you play the materials on

the other equipment, it will show on the

TV/VCR/DVD’s AUX channel. More details are

on page 34.

Audio and video cables are not supplied.

Connect audio cables to the

AUDIO OUT Jacks on the

VCR and to the red and

AUDIO/VIDEO OUT Jacks

onVCR (example only)

white AUDIO In Jacks on the

front of the TV/VCR/DVD.

3CH

4CH

AUDIO VIDEO

ANT.

OUT

HEADPHONE VIDEO

AUDIO

STANDBY-ON

VOLUME

STOP

OPEN/CLOSE

SOURCE

CHANNEL

REC/OTR

REW

STOP/EJECT

AUDIO

DVD

VCR/TV

3CH

4CH

AUDIO/VIDEO IN Jacks

on front of TV/VCR/DVD

AUDIO VIDEO

OUT

ANT.

OUT

Connect aVideo cable to the

VIDEO OUT Jack on theVCR and

to the yellowVIDEO In Jack on

the front of the TV/VCR/DVD.

When all other connections are

complete, plug in the

TV/VCR/DVD’s power cord.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 11

Optional Connections 11

Digital Stereo Hookups

You can connect the TV/VCR/DVD to a Stereo

that has a Digital Coaxial In jack. Use this

hookup if you want to hear the TV/VCR/DVD

sound through the Stereo instead. Use these

connections for a Dolby Digital-compatible

Stereo or for a Receiver that has a Mini-Disc or

Digital Audio Tape deck.

To AUDIO OUT

COAXIAL jack

on TV/VCR/DVD

AUDIO OUT

COAXIAL

ANT.

Connect the antenna/CableTV

signal. Details are on pages 9-10.

AUDIO OUT

COAXIAL

Connect a digital audio coaxial

cable (not supplied) to the AUDIO

OUT COAXIAL jack on the

TV/VCR/DVD.

Also connect the cable to the

Stereo’s COAXIAL DIGITAL

AUDIO IN jack.

To Stereo’s

COAXIAL DIGITAL AUDIO IN jack

If the Stereo is Dolby

Digital-compatible, set DOLBY

DIGITAL to BITSTREAM. If the

Stereo is not Dolby Digital-compatible

or if you connected to a Mini-Disc or

Digital Audio Tape Deck, set DOLBY

DIGITAL to PCM. Details are on page 72.

An incorrect setting causes noise

distortion and damages speakers.

Helpful Hints

• You cannot use a Mini-Disc or

Digital Audio Tape deck to

copy Dolby Digital 5.1 channel

surround sound discs.

• If the disc is not recorded in

Dolby Digital 5.1 channel

surround sound, you will not

hear multi-channel sound even

if you use the Digital Stereo

hookup.

• To see if your disc is recorded

in Dolby Digital, look for a

Dolby Digital logo on disc or

on its case.

• To see if your Stereo has

Dolby Digital, look for a Dolby

Digital logo on your Stereo.

Or, refer to the Stereo

owner’s manual.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 12

12 WatchingTV

The unit selects available TV channels automatically when you

connect an Antenna or Cable TV signal to it.To reset TV

channels, see page 20.

STANDBY-ON PICTURE SLEEP SELECT

If you are using a Cable Box or Satellite Receiver, you do not

need to set channels at the TV/VCR/DVD.

CH.

Press STANDBY-ON to turn on the TV/VCR/DVD.

+100

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

To watchTV, press CH. ▲/▼ to select memorized

PLAY

STOP

channels. Memorized channels are those that appear

when you flip through channels. If a channel is skipped,

DISC

RECORD

you still can use the Number buttons to select it.This

is a non-memorized channel; it may have weak

reception in your area.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

To update your memorized and non-memorized

channels, see page 19.

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Remember, if you are using a Cable Box/Satellite

Receiver, set the TV/VCR/DVD to channel 3, 4 or

AUX. Change channels at the Cable Box/Satellite

Receiver.

PressVOL. ▲/▼ to adjust the volume.

VOLUME 20

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 13

Playing a Videotape 13

Follow these steps to simply play a videotape. Videotape

playback options are on pages 35-41.

STANDBY-ON PICTURE SLEEP SELECT

Insert a videotape in the cassette

compartment of theTV/VCR/DVD. The power

CH.

will come on. If the tape’s record tab is missing,

playback should start automatically.

+100

VOL.

+10

ZOOM

If playback does not start automatically, press

PLAY B to start playback.

SPEED C.RESET

MUTE

PLAY

STOP

Press STOP C to stop playback.

2-4

DISC

RECORD

DISPLAY

SETUP

Press j / h to rewind the tape.

ENTER

Press i / g to fast forward the tape.

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

Press STOP/EJECT

on the front of the

AUDIO SUBTITLE ANGLE

MODE

TV/VCR/DVD to remove the tape.

Helpful Hints

• If the tape you want to play is

already in the TV/VCR/DVD,

turn on the power. Press

SELECT to choose TV/VCR

mode (the redVCR/TV light

will be on), then press

PLAY B.

• When you play an S-VHS

format tape, you cannot get

the high resolution that would

be available on an S-VHSVCR.

Noise lines (black and white

streaks) may appear in the

picture.

• If you press SELECT while

playing a videotape, playback

will stop and the unit will

switch to DVD mode.This will

happen also if you press

PLAY B (DVD) or

OPEN/CLOSE A(DVD) on

the front of the TV/VCR/DVD

during videotape playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 14

14 Playing a Disc

Before you begin, turn on the power of other equipment

connected to the TV/VCR/DVD. Set a stereo (if applicable) to

the correct sound source or channel. Details are on page 11.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Press STANDBY-ON to turn on the

TV/VCR/DVD. The unit will be in TV/VCR mode.The

+100

redVCR/TV light will be on.

VOL.

+10

SPEED C.RESET

ZOOM

Press SELECT repeatedly to put the

MUTE

TV/VCR/DVD in DVD mode. The green DVD light

PLAY

STOP

will appear on the front of the TV/VCR/DVD.

DISC

RECORD

Press OPEN/CLOSE A on the front of the

TV/VCR/DVD to open the disc tray.

Press OPEN/CLOSE A on

the front of the

TV/VCR/DVD.

Place a disc into the tray.

Insert a disc.

Some DVDs are recorded on both sides. Make sure the

label of the side you want to play is facing up.

Or, if the DVD is recorded on only one side, place the

disc in the tray with the label facing up and the shiny

side facing down.

Helpful Hints

• Even if you turn off the unit in

DVD mode, if you turn it on

again with the STANDBY-ON

button, it will be inTV/VCR

mode. If the unit was shut down

by unplugging the power cord

or due to a power failure, it will

be in DVD mode when you

turn it on again.

• An ‘’X” will appear on the

screen when you try to access

a feature that is not available.

This is not a problem with the

TV/VCR/DVD.

Press PLAY B to close the tray. The tray will

close and playback will begin. If playback does not start

automatically, press PLAY B again.

• If a disc is dirty or scratched,

the picture may be distorted or

playback may stop. Remove the

disc and try a different one.

• Press OPEN/CLOSE A (DVD)

or PLAY B (DVD) on the front

of theTV/VCR/DVD when the

power is off.This turns on the

unit in DVD mode (not

If a DVD menu appears instead, see page 52.

To play MP3 or JPEG files, see page 66.

You also can close the tray by pressing

OPEN/CLOSE A.

Press STOP C to stop playback. If playback remains

stopped for 5 minutes, the DVD screen will dim. If

TV/VCR mode).

playback is stopped for 20 minutes with no activity at

• If a disc has multiple layers, the

picture may freeze occasionally.

This happens when the first

layer switches to the second

layer.This is not a malfunction.

• Pressing SELECT during disc

playback stops disc playback and

switches the unit toTV/VCR

mode. Pressing

the TV/VCR/DVD, the unit will turn off.

PLAY B (VCR) on the front of

the unit during disc playback

stops disc playback and starts

tape playback.

REMINDER: Only certain discs will play.

See page 7 for details.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 15

Remote Control Buttons 15

PICTURE Button

SLEEP Button

Press to access the picture controls.

Details are on page 26.

Press to set the SleepTimer. Details

are on page 37.

STANDBY-ON Button

Press to turn on or off the

TV/VCR/DVD.

SELECT Button

Press to choose AUX,TV/VCR or

DVD mode.The corresponding

light will appear on the front of the

TV/VCR/DVD to indicate which

mode is active. Details are on page

17.

Number Buttons

TV Mode: Press two digits to

STANDBY-ON PICTURE SLEEP SELECT

access a specific channel. Press 0

before the number of a single-digit

channel. Details are on page 12.

+100/+10 button:To select channels

100 or higher, press +100/+10, then

the Number buttons of the last 2

digits of the channel number.

DVD Mode: Use the Number

buttons to enter a track or chapter

number.

PLAY B Button

Press to start playing a disc or

video cassette. Details are on pages

13-14.

CH.

VOL.

+100

+10

SPEED C.RESET

ZOOM

MUTE

G / g Button

PLAY

STOP

During disc playback, press briefly

to skip to the next track or

chapter. Details are on page 55.

Or, press and hold for 2 seconds

to search forward during disc

playback. Details are on page 53.

Press to forward a videotape.

Details are on page 40.

DISC

+100/+10 button: Press before

entering double-digit numbers. For

example, to select chapter 16, press

+100/+10, then 1, 6.

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

k (pause) Button

AUDIO SUBTITLE ANGLE

MODE

Press to pause videotape recording.

Press again to resume recording.

Details are on page 27.

Press to pause videotape or DVD

playback. Press repeatedly to

advance the picture one frame at a

time. Details are on pages 40 and 56.

STOP C Button

Press to stop disc or videotape

playback.

Arrow Buttons

Use the Arrow buttons to select or

adjust menu items.

RECORD Button

Press once to start a recording on

videotape. Details are on page 27.

RETURN Button

Press to go to the previous Setup

menu in DVD orTV/VCR mode.

Press to remove some menus or

displays.

DISPLAY Button

TV/VCR Mode: Press to see the

videotape counter, channel or time

on the screen. Details are on page 26.

DVD Mode: Press to see the disc

status on the screen. Details are on

page 62.

REPEAT Button

Press to play a disc, title, chapter or

track repeatedly. Details are on page

57.

TITLE Button

Press to access a DVD’s title menu if

available. Details are on page 52.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 16

16 Remote Control Buttons (cont’d)

ZOOM Button

CH. (channel) K/L Buttons

Press to select memorizedTV

channels.

Press to enlarge the picture during

DVD playback. Details are on page

60.

Details are on page 12.

C.RESET (counter reset)

Button

VOL. (volume) K/L Buttons

Press to reset the tape counter to

0:00:00. Details are on page 37.

Press to cancel aTimer Recording.

Press to adjust the volume.

STANDBY-ON PICTURE SLEEP SELECT

Details are on page 32.

MUTE Button

Press to mute or restore the

sound.

SPEED Button

CH.

Press to choose a tape recording

speed (SP or SLP). Details are on

page 27.

+100

VOL.

DISC MENU Button

Press to access DVD disc menus.

Details are on page 52.

+10

SPEED C.RESET

ZOOM

MUTE

j / h Button

During disc playback, press briefly

to skip to the beginning of the

current track/chapter. Press

repeatedly to skip to previous

tracks/chapters.

PLAY

STOP

DISC

RECORD

ENTER Button

Press to accept or change a menu

setting.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

Details are on page 55.

CLEAR SEARCH MODE REPEAT

Or, press and hold for 2 seconds

to search backward during disc

playback. Details are on page 53.

Press to reverse a videotape. Details

are on page 40.

-B

AUDIO SUBTITLE ANGLE

MODE

REPEAT A-B Button

Press to set a section of a disc to

play repeatedly. Details are on page

57.

SETUP Button

Press to access or remove the

TV/VCR/DVD's Setup menu.

ANGLE Button

Press to change the camera angle

and watch a disc sequence from a

different perspective. Details are on

page 59.

CLEAR Button

Press to reset or erase a setting or

wrong information.

SUBTITLE Button

Press to select a subtitle language.

Details are on page 59.

MODE Button

Press to play a program or to start

Random playback. Details are on

page 65.

Press to select a Black Level or

Virtual Surround setting. Details are

on page 64.

AUDIO Button

Press to select an audio language

during DVD playback.

Press to select a sound mode

during Audio CD orVideo CD

playback. Details are on page 61.

Press to select STEREO, SAP or

MONO while receiving MTS

broadcast.

Press to switch MONO/HIFI during

playback of a videotape. Details are

on pages 50 and 51.

SEARCH MODE Button

Press to find a specific time,

chapter, track or title on a disc.

Details are on pages 54-55.

Press to set up Markers. Details are

on page 58.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 17

Front Panel 17

Front design varies slightly among models.

Cassette Compartment

Insert a videotape here.

DiscTray

Insert a disc here.

CHANNEL K/L Buttons

Press to selectTV channels.

Details are on page 12.

OPEN/CLOSE A Button (DVD)

Press to open or close the disc tray.

Details are on page 14.

STANDBY-ON

VOLUME

STOP

OPEN/CLOSE

SOURCE

CHANNEL

REC/OTR

REW

STOP/EJECT

AUDIO

STOP C Button (DVD)

Press to stop disc playback.

Details are on page 14.

DVD

VCR/TV

VOLUME K/L Buttons

Press to adjust the volume.

STANDBY-ON

VOLUME

PLAY NEXT

STOP

OPEN/CLOSE

SOURCE

CHANNEL

REC/OTR

REW

PLAY F.FWD

STOP/EJECT

HEADPHONE VIDEO

AUDIO

DVD

VCR/TV

STANDBY-ON Button

STOP/EJECT C/A

Press to turn theTV/VCR/DVD on or

off.Turn off theTV/VCR/DVD for a

timer recording.

Button (VCR)

Press to stop tape playback.

Press while playback is

stopped to remove the

tape.

F.FWD D Button

(VCR)

PLAY B Button (DVD)

Press to start disc playback.

Details are on page 14.

PREV H,

NEXTi Buttons (DVD)

Press to go to a different chapter or

track. Details are on page 55.

DVD light (green)

Press to fast forward the

tape or to search forward

quickly during playback.

Details are on page 40.

PLAY B Button (VCR)

Press to start tape playback.

Details are on page 13.

VIDEO and AUDIO L/R

(left/right) In jacks

Use audio and video cables

to connect these jacks to

the Audio andVideo Out

jacks of a Camcorder, DVD

player orVCR.This lets you

watch materials playing on

the other equipment when

you choose AUX at the

TV/VCR/DVD. Details are on

pages 10 and 34.

Appears if theTV/VCR/DVD is in DVD

mode.

SOURCE Button

Press to select AUX,TV/VCR or DVD

mode. If you switch toTV/VCR mode,

wait about 4 seconds before switching

back to DVD mode.This button works

the same as the SELECT button on the

remote.

VCR/TV light (red)

Appears if theTV/VCR/DVD is in

TV/VCR mode.

REC/OTR light (red)

This light flashes during recording. It

lights when theTV/VCR/DVD is in

Standby mode (power off) for a timer

recording.

HEADPHONE jack

Connect headphones (not

supplied) here for personal

listening.

REC/OTR I Button (VCR)

Press to start a videotape recording.

Details are on page 27.

Press repeatedly to start a One-Touch

Recording. Details are on page 28.

REW E Button (VCR)

Press to rewind the tape or to search

backward quickly during playback.

Details are on page 40.

Remote Sensor

Receives a signal from your

remote control so you can

operate theTV/VCR/DVD

from a distance.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 18

18 Rear Panel

ANT. Jack

(Antenna In)

Connect an antenna or CableTV signal here.This bringsTV

channels to theTV/VCR/DVD. If you do not connect an antenna

or CableTV signal to theTV/VCR/DVD (or connect to a Cable

Box/Satellite Receiver through this jack), you will not receive any

TV channels. Details are on pages 9-10.

Power Cord

Connect to a standard AC outlet (120V/60Hz).

AUDIO OUT COAXIAL Jack

Connect this jack to a Digital Stereo using a digital audio coaxial

cable (not supplied). Use this connection if the Stereo has Dolby

Digital compatibility and has a Digital Coaxial Audio In jack.You

may also use this connection when connecting theTV/VCR/DVD

to a Mini-Disc or Digital AudioTape deck. Details are on page 11.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 19

Menu Language,Auto Channel Programming 19

Menu Language

This affects the language of the TV/VCR/DVD’s setup menus

and on-screen display terms.This does not alter the language

of TV programming, videotapes, discs or closed captioning.

● Before you begin, press SELECT to put the

TV/VCR/DVD inTV/VCR mode.The redVCR/TV

light will appear.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

Press SETUP once so theTV/VCR SETUP

MUTE

menu appears.

PLAY

STOP

Press ▲ or ▼ to select LANGUAGE.

DISC

RECORD

2-3

1,4

– TV/VCR SETUP –

TIMER PROGRAMMING

SETTING CLOCK

DISPLAY

SETUP

ENTER

CHANNEL SET UP

USER'S SET UP

TITLE

RETURN

REPEAT

V-CHIP SET UP

B LANGUAGE [ENGLISH]

CAPTION [OFF]

CLEAR SEARCH MODE REPEAT

ZERO RETURN

A-B

TIME SEARCH

INDEX SEARCH

AUDIO SUBTITLE ANGLE

MODE

Press ENTER repeatedly to select ENGLISH,

ESPAÑOL or FRANÇAIS The selected language

STANDBY-ON PICTURE SLEEP SELECT

will appear inside the [ ].

This will be the language of the TV/VCR/DVD setup

menus in both TV/VCR and DVD modes.

CH.

+100

Press SETUP to exit the menu.

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

Auto Channel Programming

To auto program only the channels which are available in

your area, follow the steps below.

PLAY

STOP

● Before you begin, put the TV/VCR/DVD in TV/VCR mode.

Press SELECT so the redVCR/TV light appears on the

front of the TV/VCR/DVD.

DISC

RECORD

2-3

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

Press SETUP.

CLEAR SEARCH MODE REPEAT

A-B

Helpful Hints

Press ▲ or ▼ to select CHANNEL SET UP.

Then, press ENTER.

• The TV/VCR/DVD cannot

change channels at the Cable

Box or Satellite Receiver. Set

the TV/VCR/DVD to 3, 4 or

AUX. Change channels at the

Cable Box/Satellite Receiver.

• Channel settings will be saved

even if the power fails.

– TV/VCR SETUP –

TIMER PROGRAMMING

SETTING CLOCK

B CHANNEL SET UP

USER'S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

• If you have Spanish or French

menus and need English, press

SETUP. Press ▲ or ▼ to

select IDIOMA or LANGAGE.

Press ENTER to select

Press ▲ or ▼ to select AUTO CH

PROGRAMMING. Press ENTER. The

TV/VCR/DVD memorizes available channels.When

scanning is complete, the TV/VCR/DVD will go to the

lowest available channel. Use

– CHANNEL SET UP –

CH. ▲/▼ to scan memorized

ENGLISH. Press SETUP to

remove the menu.

ADD / DELETE CH (CATV)

channels.You can select non-

memorized channels with the

Number buttons.

B AUTO CH PROGRAMMING

• You cannot reset TV channels

when the unit is in DVD

mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 20

20 Adding/Deleting Channels

You can delete TV channels you no longer receive or seldom

watch. Or, you can add more channels if the TV/VCR/DVD

did not memorize all your favorite channels.

● Before you begin, press SELECT to put the

TV/VCR/DVD inTV/VCR mode.The redVCR/TV

light will appear.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

Press SETUP.

+10

SPEED C.RESET

ZOOM

MUTE

Press ▲ or ▼ to select CHANNEL SET UP.

PLAY

STOP

Then, press ENTER.

DISC

RECORD

2-5

1,6

– TV/VCR SETUP –

TIMER PROGRAMMING

SETTING CLOCK

B CHANNEL SET UP

USER'S SET UP

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

CLEAR SEARCH MODE REPEAT

ZERO RETURN

A-B

TIME SEARCH

AUDIO SUBTITLE ANGLE

MODE

INDEX SEARCH

Press ▲ or ▼ to select ADD/DELETE CH. (TV)

or (CATV) will appear beside ADD/DELETE CH.This

indicates whether you connected an Antenna (TV) or

a Cable TV signal (CATV) to the TV/VCR/DVD. Then,

press ENTER. The menu will disappear and a TV

channel will appear.The channel number will appear,

along with ADD/DELETE.

– CHANNEL SET UP –

B ADD / DELETE CH (CATV)

AUTO CH PROGRAMMING

Press ▲ or ▼ until the channel you wish to add

or delete appears. You also can use the Number

Helpful Hints

buttons or CH. ▲/▼ to choose a channel.

• To confirm that a channel has

been added or deleted, press

CH. ▲/▼ to see if you can or

cannot select the channel.

Only memorized/added

channels can be selected with

CH. ▲/▼. Use the Number

buttons to select deleted

channels.

• If you connected an Antenna

to the TV/VCR/DVD, channels

2-69 will be available to add or

delete. If you connected to

Cable TV, channels 1-125 will

be available.

ADD / DELETE

Press ENTER to add or delete the channel.

To add a channel, press ENTER so ADD and the

channel number appear in light blue (teal).To delete a

channel, press ENTER so DELETE and the channel

number appear in light red (purple).

To delete another channel, repeat steps 4-5.

• This function will not operate

when the unit is in DVD

mode.

Press SETUP when you are finished.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 21

Setting the Clock 21

Manual Clock Setting

You must set the clock before you can do a timer recording.

Set the clock manually.Afterward, use Auto Clock to monitor

the time. Details are on pages 23-24.

If you do not receive a PBS station that carries time signals,

you cannot use Auto Clock. Set AUTO CLOCK to OFF.The

time will remain as you set it manually.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

+10

Before you begin ...

SPEED C.RESET

ZOOM

MUTE

● With the power on, press SELECT to put the

TV/VCR/DVD inTV/VCR mode.The redVCR/TV

light will appear.

PLAY

STOP

DISC

RECORD

2-4

Press SETUP.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

Press ▲ or ▼ to select SETTING CLOCK.

Then, press ENTER.

AUDIO SUBTITLE ANGLE

MODE

– TV/VCR SETUP –

TIMER PROGRAMMING

B SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

Press ▲ or ▼ to select MANUAL CLOCK SET.

Then, press ENTER.

– SETTING CLOCK –

AUTO CLOCK

[ON]

AUTO CLOCK CH SEARCH

AUTO CLOCK CH

[02]

B MANUAL CLOCK SET

D.S.T.

[OFF]

While the MONTH space is flashing, press

▲ or ▼ until the correct month appears.

Then, press B.

– MANUAL CLOCK SET –

MONTH DAY

05 - - - - - - - - -

HOUR MINUTE

- - - - - -

YEAR

Instructions continue on the next page.

Helpful Hint

• You may have to reset the

clock after a power failure.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 22

22 Setting the Clock (cont’d)

Instructions continued from the previous page.

STANDBY-ON PICTURE SLEEP SELECT

While the DAY space is flashing, press ▲ or ▼

until the correct day appears.Then, press B. An

abbreviation for the selected day of the week will

CH.

appear.

– MANUAL CLOCK SET –

+100

MONTH DAY

05 06 - - - - - - -

HOUR MINUTE

- - - - - -

YEAR

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

DISC

RECORD

5-8

DISPLAY

SETUP

While theYEAR space is flashing, press ▲ or ▼

until the correct year appears.Then, press B.

– MANUAL CLOCK SET –

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

MONTH DAY

05 06 FRI 2005

HOUR MINUTE

- - - - - -

YEAR

A-B

AUDIO SUBTITLE ANGLE

MODE

While the HOUR space and AM or PM are

flashing, press ▲ or ▼ until the correct hour

appears.Then, press B.

– MANUAL CLOCK SET –

MONTH DAY

05 06 FRI 2005

HOUR MINUTE

05 - - PM

YEAR

While the MINUTE space is flashing, press

▲ or ▼ until the correct minute appears.

– MANUAL CLOCK SET –

MONTH DAY

05 06 FRI 2005

HOUR MINUTE

05 40 PM

YEAR

Press SETUP. Although seconds are not displayed,

they begin counting from 0 when you press SETUP.

Use this action to synchronize the clock exactly.

5:40 PM

Helpful Hint

• To adjust the clock later,

follow steps 1-3 on page 21.

Then press s or B to select

the item you want to change.

Enter the correct information

by pressing ▲ or ▼. Press

SETUP when you are finished.

Press DISPLAY to see the current time on

the screen. Details are on page 26.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 23

Setting the Clock (cont’d) 23

Auto Clock Setting

You can have the TV/VCR/DVD adjust the clock using your

PBS channel. Once you set the clock manually, the

TV/VCR/DVD will monitor the correct time and date

broadcast by the PBS station.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Before you begin ...

● Turn on the TV/VCR/DVD power.

● Connect the antenna/Cable TV signal.

Details are on pages 9-10.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

● Turn on the Cable Box/Satellite Receiver (if applicable).

● Set up the TV channels. Details are on pages 19-20.

● Set the clock manually. Details are on pages 21-22.

● Press SELECT to put theTV/VCR/DVD inTV/VCR

mode.The redVCR/TV light will appear.

PLAY

STOP

DISC

RECORD

2-3

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Press SETUP.

Press ▲ or ▼ to select SETTING CLOCK.

Press ENTER.

– TV/VCR SETUP –

TIMER PROGRAMMING

B SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

With AUTO CLOCK selected, press ENTER so

ON appears beside AUTO CLOCK.

– SETTING CLOCK –

B AUTO CLOCK

[ON]

AUTO CLOCK CH SEARCH

AUTO CLOCK CH

[02]

MANUAL CLOCK SET

D.S.T.

[OFF]

Instructions continue on the next page.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 24

24 Setting the Clock (cont’d)

Instructions continued from the previous page.

If you already know your PBS channel number,

STANDBY-ON PICTURE SLEEP SELECT

skip ahead to step 8. If you do not know the

channel number of your PBS station, press ▼ to

select AUTO CLOCK CH SEARCH.Then press

ENTER.

CH.

+100

– SETTING CLOCK –

VOL.

AUTO CLOCK

[ON]

+10

B AUTO CLOCK CH SEARCH

SPEED C.RESET

ZOOM

AUTO CLOCK CH

[02]

MUTE

MANUAL CLOCK SET

D.S.T.

[OFF]

PLAY

STOP

DISC

RECORD

4,7-9

5-6,10

● The TV/DVD/VCR will search for a channel that

carries a time signal. Channels that carry the time

will appear at the top of the screen. Use one of

these channels when you enter your AUTO

CLOCK CH at step 9.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

This may take several minutes.An ‘’_ _” appears in

the lower left corner of the screen when the search

is complete.

– AUTO CLOCK CH SEARCH –

08 10 13

– –

Press SETUP to remove the AUTO CLOCK

CH SEARCH screen.

Press SETUP to access the menu again.

Press ▲ or ▼ to select SETTING CLOCK.

Then, press ENTER.

Press ▼ to select AUTO CLOCK CH,

then press ENTER.

Helpful Hints

• During the Auto Clock

Channel Search, the picture

may be distorted.This is

normal.

– SETTING CLOCK –

AUTO CLOCK

[ON]

AUTO CLOCK CH SEARCH

B AUTO CLOCK CH

[08]

MANUAL CLOCK SET

D.S.T.

[OFF]

• If there are no PBS stations

available, set AUTO CLOCK to

OFF. Set the clock manually.

• If the TV/VCR/DVD is

connected to a Cable Box or

Satellite Receiver, select the

local PBS station on the Cable

Box/Satellite Receiver. Set the

TV/VCR/DVD to the output

channel of the Cable

Press { or B until the channel number of your

PBS station appears. Use the channel number

you found at step 4.

Press SETUP to remove the menu.

Box/Satellite Receiver (03, 04

or AUX).

Press STANDBY-ON to turn off the

TV/VCR/DVD and let the PBS channel update

the clock.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 25

Daylight-SavingsTime 25

When Daylight-Savings Time (D.S.T.) is ON, the clock will

move forward 1 hour on the first Sunday in April and move

back 1 hour on the last Sunday in October.

To turn Daylight-Savings Time ON or OFF, follow the steps

below.

● Before you begin, press SELECT to put the

TV/VCR/DVD inTV/VCR mode.The redVCR/TV

light will appear.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

Press SETUP.

PLAY

STOP

DISC

RECORD

2-3

1,4

Press ▲ or ▼ to select SETTING CLOCK.

DISPLAY

SETUP

Then, press ENTER.

ENTER

TITLE

RETURN

REPEAT

– TV/VCR SETUP –

TIMER PROGRAMMING

B SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

Press ▲ or ▼ to select D.S.T.Then, press

ENTER until ON appears beside D.S.T. Or, press

ENTER so OFF appears beside D.S.T. if you want to

disable this feature.

– SETTING CLOCK –

AUTO CLOCK

[ON]

AUTO CLOCK CH SEARCH

AUTO CLOCK CH

[02]

MANUAL CLOCK SET

B D.S.T.

[ON]

Press SETUP to remove the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 26

26 Status Displays, Picture Controls

Status Displays

To see theVideotape Counter, Clock or Channel number on

the screen in TV/VCR mode, press DISPLAY repeatedly.

The following will occur when Closed Captions are OFF.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Press DISPLAY once to see theVideotape

counter. After 5 seconds, only the counter will

+100

VOL.

remain on the screen.

+10

SPEED C.RESET

ZOOM

STOP

MUTE

PLAY

STOP

DISC

RECORD

COUNT 0:12:34

COUNT 0:12:39

DISPLAY

SETUP

ENTER

1-2

TITLE

RETURN

REPEAT

Press DISPLAY again to see the current time

andTV channel. After 5 seconds, only the clock and

channel number will remain on the screen.To clear

them, press DISPLAY again.

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

STOP

5:40 PM

CH 2

5:40 PM

CH 2

STANDBY-ON PICTURE SLEEP SELECT

● If you press DISPLAY when Closed Captions are ON,

all the status information will appear for 5 seconds.After

5 seconds, they will clear from the screen. Closed Caption

details are on page 42.

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

Picture Controls

MUTE

Follow these steps to adjust the TV/VCR/DVD’s brightness,

sharpness, tint, color or contrast.

PLAY

STOP

DISC

Press PICTURE.

RECORD

2-3

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

Within 5 seconds, press ▲ or ▼ to select the

picture control you want to adjust.

CLEAR SEARCH MODE REPEAT

A-B

2 _{You can select BRIGHT, CONTRAST, COLOR,TINT}

AUDIO SUBTITLE ANGLE

MODE

or SHARPNESS.

Helpful Hint

BRIGHT

• Degaussing: Magnetism from

nearby appliances and speakers

might affect the color of theTV

picture. If this happens, move

theTV/VCR/DVD away from

the appliance. If the color is still

not correct, turn off the power

for 30 minutes (for 27MDTR20)

or disconnect the power cord

for 30 minutes (for 19MDTR20

and 20MC4304). After 30

Within 5 seconds, press s or B to adjust the

picture control.

BRIGHT

to decrease brightness to increase brightness

CONTRAST to decrease contrast to increase contrast

to decrease color

to add purple

to brighten color

to add green

COLOR

TINT

minutes, try using the unit again.

SHARPNESS to make soft

to make clear

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 27

Videotape Recording 27

Put a videotape in the

Place a tape with its record tab intact in the

TV/VCR/DVD.

cassette compartment of theTV/VCR/DVD. The

TV/VCR/DVD power will come on.

If the power is already on and a videotape is in the

unit, make sure the unit is in TV/VCR mode.

Press SELECT so the redVCR/TV light appears on the

front of the unit.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Press SPEED until the desired tape speed (SP

or SLP) appears in the bottom left corner of

+100

the screen. See tape speed details below.

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

Press CH. ▲/▼ or the Number buttons to

select the channel you want to record.

PLAY

STOP

You cannot change channels during recording.You can

only record and view one TV channel at a time.

DISC

RECORD

4-5

DISPLAY

SETUP

Press RECORD once to start recording.

The REC/OTR light will flash on the front of the

TV/VCR/DVD. (If the tape does not have a record tab,

the tape will eject. Insert another tape.)

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

To pause the recording, press k.To resume

recording, press k again or press RECORD.

To stop recording, press STOP C .

Tape Speeds

This chart shows the recording/playback time for 3 types of

video cassettes (T160,T120 andT60).There are 3 playback

speeds: SP, LP and SLP.A tape will play only in the speed in

which it was recorded.When recording, you can change the

tape speed using SPEED.You cannot record in LP speed on

thisTV/VCR/DVD.

Helpful Hints

• You cannot record DVD

contents onto a videotape

using this unit.

• Recording options are on pages

28-33.

• If you pause a recording for 5

minutes, the unit will start

Recording again automatically.

• You can change the tape speed

by pressing SPEED while a

recording is in progress. Some

distortion may appear on the

tape.

The slower the speed, the more programming you can fit on

the tape. SLP is the slowest speed.

Cassette type / Playback Time

Tape Speed

T160

T120

T60

SP(Standard Playback) 2 hrs.

40 mins.

2 hrs.

1 hr.

LP(Long Playback)

(playback only)

SLP

5 hrs.

20 mins.

4 hrs.

6 hrs.

2 hrs.

3 hrs.

8 hrs.

(Super Long Playback)

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 28

28 One-Touch Recording

A One-Touch Recording (OTR) is an immediate timed

recording from 30 minutes to 8 hours long.

STANDBY-ON PICTURE SLEEP SELECT

Before you begin ...

● Turn on the TV/VCR/DVD.

CH.

● Press SELECT to put the unit in TV/VCR mode.

The redVCR/TV light will appear on the front of the unit.

● Insert a videotape with its erase prevention tab in place.

Details are on page 8.

+100

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

Press the Number buttons or CH. ▲/▼to select

PLAY

STOP

the channel you want to record.

Remember, if the TV/VCR/DVD is connected to a

DISC

RECORD

Cable Box/Satellite Receiver, the TV/VCR/DVD must

be on channel 3, 4 or AUX.

Select the channel you want to record at the Cable

Box/Satellite Receiver. Details are on page 9.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Press SPEED to select a tape recording speed

(SP or SLP). Details are on page 27.

Press REC/OTR I on the

front of theTV/VCR/DVD.

Press REC/OTR I on the front of the

TV/VCR/DVD repeatedly to select a recording

length. Recording will start immediately.

Each press of REC/OTR I will increase the recording

time by 30 minutes.The maximum recording length is

8 hours.

Helpful Hints

OTR (2:30)

• You cannot start an OTR with

the RECORD button on the

remote control.

• To show the remaining

recording time, press DISPLAY.

OTR and the remaining

recording time will appear

briefly in the top left corner of

the screen.

• If the tape ends before the

recording’s end time, the

TV/VCR/DVD will stop

recording, eject the tape, and

turn itself off.

Press STOP C to stop a one-touch recording

before its designated end time. Otherwise,

recording will stop at the time you designated.The

TV/VCR/DVD will turn off when the OTR ends.

• An OTR will continue even if

you turn off theTV/VCR/DVD.

The flashing REC/OTR light

indicates the recording is still in

progress.

• To change the recording length

while an OTR is in progress,

press REC/OTR I repeatedly.

• You cannot pause an OTR.

• If the preset time for a timer

recording comes up during an

OTR, the OTR has priority.The

timer recording will not take

place.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 29

Timer Recording 29

Follow the steps below to program the TV/VCR/DVD to

record TV programs while you’re away from home.

The TV/VCR/DVD will record and turn itself off automatically.

You can set a maximum of 8 timer recordings.

STANDBY-ON PICTURE SLEEP SELECT

Before you begin, make sure ...

CH.

● The clock is set. If the clock is not set, the Manual Clock

Set menu will appear. See pages 21-22 to set the clock.

● Channels are set. Details are on page 19.

● A tape is in the TV/VCR/DVD. Make sure the record tab is

intact. Details are on page 8.

+100

VOL.

+10

SPEED C.RESET ZOOM

MUTE

PLAY

Press SETUP. Press ▲ or ▼ to selectTIMER

STOP

DISC

PROGRAMMING, then press ENTER.

RECORD

1-3

DISPLAY

ENTER

– TV/VCR SETUP –

B TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

SETUP

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

V-CHIP SET UP

A-B

LANGUAGE [ENGLISH]

CAPTION [OFF]

AUDIO SUBTITLE ANGLE

MODE

ZERO RETURN

TIME SEARCH

INDEX SEARCH

Press ▲ or ▼ to select a program position.

Then, press B.

– TIMER PROGRAMMING –

CH DATE

BEGIN END

- - - /- - - - - - :- -

- :- - - -

While CH is selected, press ▲ or ▼ to select

the channel you want to record.Then press B.

If the TV/VCR/DVD is connected to a Cable

Box/Satellite Receiver, the TV/VCR/DVD must be on

channel 3, 4 or AUX.

Set CH as 03, 04 or AUX in the Timer Programming

menu. Choose the channel you want to record at the

Cable Box/Satellite Receiver. Leave the Cable

Box/Satellite Receiver on for the timer recording.

Leave the TV/VCR/DVD set to AUX. (Press SELECT

on the remote to choose AUX at the TV/VCR/DVD.)

Additional details are on page 9.

– TIMER PROGRAMMING –

CH DATE

BEGIN END

Helpful Hint

- - - /- - - - - - :- -

B 61 - /- - - - - - :- -

- - - /- - - - - - :- -

- :- - - -

• You cannot access the Timer

Programming menu at step 1 if

the clock is not set.The

Setting Clock menu will

appear. Follow the steps on

pages 21-24 to set the clock.

• Enter the information while

the space is flashing.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 30

30 Timer Recording (cont’d)

While DATE is selected, press ▲ or ▼ until the

correct date appears. Recording will happen once.

STANDBY-ON PICTURE SLEEP SELECT

– TIMER PROGRAMMING –

CH.

CH DATE

BEGIN END

- - - /- - - - - - :- -

B 61 7/04 MON - :- -

- - - /- - - - - - :- -

- :- - - -

+100

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

PLAY

STOP

Or, to record a program at the same time on

the same channel every day, press ▼ until

EVRY DAY appears.

DISC

RECORD

4-5

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

– TIMER PROGRAMMING –

CLEAR SEARCH MODE REPEAT

CH DATE

BEGIN END

-B

- - - /- - - - - - :- -

B 61 EVRY DAY - :- -

- - - /- - - - - - :- -

- :- - - -

AUDIO SUBTITLE ANGLE

MODE

Or, to record a program at the same time on

the same channel every week, press ▼ until

EVRY and a day of the week appear together.

— TIMER PROGRAMMING —

CH DATE

BEGIN END

- - - /- - - - - - :- -

B 61 EVRY SUN - :- -

- - - /- - - - - - :- -

- :- - - -

Finally, press B.

While BEGIN is selected, press ▲ or ▼ to

select the hour you want recording to begin.

AM or PM will appear with the hour.

Then, press B and press ▲ or ▼ to select the

minute you want recording to start. Press B.

– TIMER PROGRAMMING –

CH DATE

BEGIN END

- - - /- - - - - - :- -

B 61 7/04 MON 7:30

- - - /- - - - - - :- -

- :- - - -

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 31

Timer Recording (cont’d) 31

While END is selected, press ▲ or ▼ to select

the hour at which you want recording to stop.

AM or PM will appear with the hour.

Then, press B and press ▲ or ▼ to select the

minute at which you want recording to end.

Press B.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

+10

– TIMER PROGRAMMING –

SPEED C.RESET

ZOOM

MUTE

CH DATE

BEGIN END

- - - /- - - - - - :- -

B 61 7/04 MON 7:30

- - - /- - - - - - :- -

- :- - - -

PLAY

STOP

8:50 - -

- :- - - -

DISC

RECORD

6-7

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

Press ▲ or ▼ until the tape speed (SP or SLP)

appears at the right end of the line.

A-B

AUDIO SUBTITLE ANGLE

MODE

– TIMER PROGRAMMING –

CH DATE

BEGIN END

- - - /- - - - - - :- -

B 61 7/04 MON 7:30

- - - /- - - - - - :- -

- :- - - -

8:50 SP

- :- - - -

Press SETUP to remove the menus.

Helpful Hints

Press STANDBY-ON to turn off the

TV/VCR/DVD and set the timer recording.

The red REC/OTR light will appear on the front of the

TV/VCR/DVD.

You must turn off the TV/VCR/DVD to activate a

timer recording. If the power is not off and you

continue watching TV,TIMER REC STANDBY starts

flashing on the screen 2 minutes before the

programmed start time.Turn off the unit to do the

recording.

• To correct information while

setting the Timer Recording,

press s to go back one step

and select the incorrect

information. Press ▲ or ▼ to

enter the correct information.

• While a timer recording is in

progress, the red REC/OTR

light will flash.

• If a timer recording is set for

hours or days later, you can

use the TV/VCR/DVD until

then. Just be sure to turn off

the TV/VCR/DVD about 5

minutes before the recording.

Set the Cable Box/Satellite

Receiver if appropriate.

• If the record tab is missing, the

videotape will eject when you

press STANDBY-ON to turn

off the TV/VCR/DVD. Insert a

recordable tape for the timer

recording.

• If the tape ends before the

recording is complete, the

TV/VCR/DVD will stop

recording immediately and eject

the tape.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 32

32 Timer Recording (cont’d)

Extending aTimer Recording

To make a Timer Recording start and end later than originally scheduled,

follow these steps.

1 With the unit on, press SETUP. Press ▲ or ▼ to select TIMER

PROGRAMMING. Press ENTER.

2 Press RECORD, then press ▲ or ▼ to select the desired program.

3 Press RECORD again. Each press of RECORD will shift forward the

beginning/end time by 10 minutes. If the recording is in progress, each

press will shift forward the end time only.

If you adjust the times during recording, the recording speed

automatically changes to SLP.

To restore the original recording times, press k .

4 Press SETUP to remove the menus.

5 If the timer recording is scheduled to start later, press STANDBY-ON

to turn off the TV/VCR/DVD for the recording.

Correcting aTimer Recording

1 With the unit on, press SETUP. Press ▲ or ▼ to select TIMER

PROGRAMMING. Press ENTER.

2 Press ▲ or ▼ to select a timer recording, then press B.

3 Press s or B to select the information you want to change.

Press ▲ or ▼ to enter the correct information.

4 Press SETUP to remove the menu.

5 Press STANDBY-ON to turn off the TV/VCR/DVD to set the recording.

CancellingTimer Recordings

To cancel aTimer Recording that is in progress:

1 The red REC/OTR light will flash during recording. Press STANDBY-ON

to turn on the TV/VCR/DVD, then press STOP/EJECT C /A on the front

of the TV/VCR/DVD.

To cancel aTimer Recording that has not started:

1 With the unit on, press SETUP.

Press ▲ or ▼ to select TIMER PROGRAMMING. Press ENTER.

2 Press ▲ or ▼ to select a timer recording.

3 Press C.RESET.All the information for the selected recording will

disappear.

4 Press SETUP to remove the menu.

Checking ScheduledTimer Recordings

1 With the unit on, press SETUP.

Press ▲ or ▼ to select TIMER PROGRAMMING.

2 Press ENTER.The program details will appear on the screen.

3 Press SETUP to remove the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 33

Timer Recording Auto Return 33

Use this feature to rewind the tape to the beginning of a

completed timer recording.

STANDBY-ON PICTURE SLEEP SELECT

Press SETUP.

CH.

+100

VOL.

+10

ZOOM

Press ▲ or ▼ to select USER’S SET UP.

Then, press ENTER.

SPEED C.RESET

MUTE

– TV/VCR SETUP –

PLAY

STOP

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

B USER'S SET UP

V-CHIP SET UP

DISC

RECORD

2-4

1,5

LANGUAGE [ENGLISH]

CAPTION [OFF]

DISPLAY

SETUP

ZERO RETURN

ENTER

TIME SEARCH

INDEX SEARCH

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Press ▲ or ▼ to select AUTO RETURN.

Press ENTER until ON appears beside AUTO

RETURN. To turn off Auto Return, press ENTER to

choose OFF instead.

– USER'S SET UP –

RENTAL

[OFF]

REPEAT PLAY [OFF]

B AUTO RETURN [ON]

Press SETUP. When AUTO RETURN is ON,

when all the timer recordings are completed, the tape

will rewind to the beginning of the recorded

program(s).

Helpful Hints

• If you press STANDBY-ON

while the tape is rewinding,

the rewinding will stop.

• If there is a power failure, the

TV/VCR/DVD will retain its

memory for this feature.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 34

34 Rerecording (Tape Duplication)

AUDIO andVIDEO OUT Jacks on source unit

(VCR or Camcorder)

HEADPHONE VIDEO

AUDIO

Audio Cables from

AUDIO

VIDEO

OUT

AUDIO OUT to AUDIO IN

OUT

AUDIO andVIDEO IN Jacks on

front of TV/VCR/DVD

Video Cable from

VIDEO OUT toVIDEO IN

Make the connections shown above. Use audio

and video cables (not supplied). Connect the

source unit (VCR or Camcorder) to a power

source after connections are made.

TheVCR or Camcorder will play your tape. Insert a

prerecorded tape in the source unit. If playback

begins, press STOP C on theVCR or Camcorder.

The TV/VCR/DVD will record your tape. Insert a

blank videotape in the cassette compartment

of theTV/VCR/DVD. Make sure the tape’s record

tab is intact and the TV/VCR/DVD power is on.

Helpful Hints

• Unauthorized recording of

copyrighted television

programs, videotapes or other

materials may infringe on the

rights of copyright owners and

violate copyright laws.

• Different brands of equipment

may operate differently.

• Make sure all connections are

secure. Otherwise, you may

not record both picture and

sound.

• Programs that are copyright

protected may not record

clearly.

• You cannot record a DVD

onto a videotape using this

TV/VCR/DVD.

• You can use this connection

to simply view tapes playing

on a camcorder orVCR at the

TV/VCR/DVD. Follow steps 1,

2 and 4 for connections and

AUX setup.Then play the tape

on the camcorder, etc., as

usual.

Point theTV/VCR/DVD remote control at the

TV/VCR/DVD. Press SELECT or CH. o/p until

AUX appears on the screen. The TV/VCR/DVD is

now in Line Input or Auxiliary mode.

Press SPEED until the desired tape speed (SP

or SLP) appears in the lower left corner of the

screen.

Press PLAY B on theVCR or Camcorder and

REC/OTR I on yourTV/VCR/DVD at the same

time. Videotape copying will begin.

To stop copying, press STOP/EJECT C /A on the

TV/VCR/DVD, then stop the tape on theVCR

or Camcorder.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 35

Repeat Playback 35

Repeat Playback allows you to play a videotape continuously.

All Repeat will repeatedly play the tape from the beginning

to the end. Blank Repeat will repeatedly play the tape from

its beginning to the first part that is blank for more than 10

seconds.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Press SETUP.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

Press ▲ or ▼ to select USER’S SET UP.

Then, press ENTER.

DISC

RECORD

2-4

1,5

– TV/VCR SETUP –

DISPLAY

SETUP

ENTER

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

B USER'S SET UP

V-CHIP SET UP

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

LANGUAGE [ENGLISH]

CAPTION [OFF]

A-B

ZERO RETURN

AUDIO SUBTITLE ANGLE

MODE

TIME SEARCH

INDEX SEARCH

Press ▲ or ▼ to select REPEAT PLAY.

Press ENTER until ALL or BLANK appears

beside REPEAT PLAY. Or, to cancel Repeat Play,

press ENTER to select OFF.

– USER'S SET UP –

RENTAL

[OFF]

B REPEAT PLAY [ALL]

AUTO RETURN [OFF]

Press SETUP to remove the menu.

Press PLAY B to play a videotape.

REPEAT PLAY B will appear on the screen briefly.

Helpful Hints

• Repeat Playback stays in effect

after you turn off the

TV/VCR/DVD.The

TV/VCR/DVD keeps the

Repeat Playback setting even if

the power fails.

• If RENTAL is ON,

RENTAL PLAY B will appear

on the screen instead of

REPEAT PLAY B. Details are

on page 36.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 36

36 Rental Playback

This function enables you to improve picture quality when

playing worn cassettes such as rented videotapes.

STANDBY-ON PICTURE SLEEP SELECT

Press SETUP.

CH.

+100

VOL.

Press ▲ or ▼ to select USER’S SET UP. Then,

press ENTER.

+10

ZOOM

SPEED C.RESET

MUTE

– TV/VCR SETUP –

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

B USER'S SET UP

V-CHIP SET UP

PLAY

STOP

DISC

RECORD

LANGUAGE [ENGLISH]

CAPTION [OFF]

2-3

1,4

ZERO RETURN

DISPLAY

SETUP

TIME SEARCH

ENTER

INDEX SEARCH

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Press ▲ or ▼ to select RENTAL.

Press ENTER until ON appears beside

RENTAL. To turn off Rental, press ENTER to

choose OFF.

– USER'S SET UP –

B RENTAL

[ON]

REPEAT PLAY [OFF]

AUTO RETURN [OFF]

Press SETUP to exit the menu.

Press PLAY B to start videotape playback.

RENTAL PLAY B will appear briefly on the screen.

Helpful Hints

• Once you select Rental

Playback, it stays in effect even

after you turn off the

TV/VCR/DVD.

• The TV/VCR/DVD will retain

the Rental setting even if the

power fails.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 37

Zero Return, SleepTimer 37

Zero Return

The videotape counter shows the elapsed recording or

STANDBY-ON PICTURE SLEEP SELECT

playback time in hours, minutes and seconds from the point at

which the counter was set to 0.The counter time will not

change on a blank tape or blank portions on a tape.The “–”

before the tape counter indicates the amount of remaining

recording/playing time before the counter reaches 0.

Follow the steps below to reset the tape counter to 0 at a

tape location you want to refer to later.

CH.

+100

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

PLAY

STOP

Play, rewind or fast forward the tape to the

DISC

location you would like to refer to later.

RECORD

Press STOP C to stop the tape.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

Press C.RESET to set the counter to 0:00:00.

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

To return to this same point later, press

SETUP. Press ▲ or ▼ to select ZERO

RETURN.Then, press ENTER.

The tape counter will appear on the screen.When

the tape reaches the point at which you set the

counter to 0, the tape will stop. Press PLAY B to

watch the tape from the designated point.

– TV/VCR SETUP –

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

STANDBY-ON PICTURE SLEEP SELECT

B ZERO RETURN

TIME SEARCH

INDEX SEARCH

CH.

+100

VOL.

SleepTimer

+10

ZOOM

Use the Sleep Timer to program the TV/VCR/DVD to shut

off in a certain amount of time.

SPEED C.RESET

MUTE

PLAY

STOP

Press SLEEP until the correct amount of time

appears on the screen with SLEEP. Each press of

DISC

RECORD

SLEEP will increase the time by 30 minutes.You may

set a Sleep Timer of 30, 60, 90 or 120 minutes.

After 5 seconds, the Sleep Timer information will dis-

appear from the screen.The TV/VCR/DVD will turn

itself off after the selected amount of time has passed.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Helpful Hint

SLEEP 120 MINUTE

• To see how much time remains

before theTV/VCR/DVD turns

itself off, press SLEEP once.The

information will disappear

To Cancel the SleepTimer

Press SLEEP until “SLEEP 0 MINUTE” appears.

automatically in 5 seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 38

38 Time Search

Time Search lets you quickly advance the videotape to a

position simply by entering the amount of playback time you

want to skip.

In the example below,Time Search is set to 2 hours, 50

minutes from the present position.

Insert a videotape.

STANDBY-ON PICTURE SLEEP SELECT

Insert a videotape.

CH.

Press SETUP. Press ▲ or ▼ to select

+100

VOL.

TIME SEARCH.Then, press ENTER.

+10

ZOOM

SPEED C.RESET

MUTE

– TV/VCR SETUP –

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

B TIME SEARCH

INDEX SEARCH

PLAY

STOP

DISC

RECORD

2-4

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

Press ▲ or ▼ until your desired time appears

AUDIO SUBTITLE ANGLE

MODE

beneathTIME SEARCH at the top of the

screen. (Example: 2:50 for 2 hours, 50 minutes)

Each press of ▲ or ▼ increases or decreases the

length of time by 10 minutes.

To cancel the Time Search at this point, press SETUP.

TIME SEARCH

2 : 50

Press s or B to rewind or fast forward the

tape the length of time you chose.

The TV/VCR/DVD will rewind or fast forward the

tape the specified amount of time.

The time counts down on the screen as the search

progresses.When 0:00 is reached, the tape will start

playing.

Or, to cancel the Time Search before it finishes, press

STOP C.

Helpful Hints

• ATime Search can be set up to

a maximum of 9 hours 50

minutes in 10-minute

increments.

• Time Search will not operate

during recording.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 39

Index Search 39

This feature lets you quickly rewind or fast forward to the

start of recordings.

STANDBY-ON PICTURE SLEEP SELECT

● Index Marks are made automatically at the start of all

recordings.They are not made where recording pauses.

The time gap between Index Marks should be greater than 1

minute for SP recording and 3 minutes for SLP recording.

This means recordings should be 1 (SP) or 3 (SLP) minutes

long. Otherwise, Index Search may not find the start of the

recording. In some cases, Index Marks at the beginning of a

videotape cannot be detected.

CH.

+100

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

PLAY

STOP

Press SETUP. Press ▲ or ▼ to select

DISC

RECORD

1-3

INDEX SEARCH.Then, press ENTER.

DISPLAY

SETUP

ENTER

– TV/VCR SETUP –

TITLE

RETURN

REPEAT

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

CLEAR SEARCH MODE REPEAT

A-B

V-CHIP SET UP

AUDIO SUBTITLE ANGLE

MODE

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

B INDEX SEARCH

Press ▲ or ▼ until the number of programs you

want to skip appears beneath INDEX SEARCH.

To cancel an Index Search at this point, press SETUP.

INDEX SEARCH

0 3

Helpful Hints

Press s or B. The TV/VCR/DVD begins rewinding or

fast forwarding the videotape to the beginning of the

• Every time an Index Mark (or

recording) is passed, the

number beneath INDEX

SEARCH on the screen

decreases by one.

desired program.

When the program is reached, playback will start.

• A videotape must be in the

TV/VCR/DVD for this function

to work.

• You may search up to 20 Index

Marks.

• This function will not operate

during recording.

• To cancel an Index Search,

press STOP C .

• If the end of the tape is

reached during an Index

Search(forward), the tape will

rewind to the beginning

automatically.TheTV/VCR/DVD

will turn off and the tape will

eject.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 40

40 Videotape Playback Features

Slow Motion

Press k during playback to pause the video-

POWER PICTURE SLEEP SELECT

tape.Then press i / g to start slow

motion. Sound will be mute during slow motion.

Slow motion will stop automatically after 5 minutes

to prevent damage to the tape.

CH.

+100

VOL.

+10

Press PLAY B to return to normal playback.

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

DISC

RECORD

Forward and Reverse Searching

(SP/LP/SLP)

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

During videotape playback, press and release

CLEAR SEARCH MODE REPEAT

j / h or i / g. A fast forward or reverse

-B

AUDIO SUBTITLE ANGLE

MODE

picture search will begin.

To return to normal playback, press PLAY B .

Super High Speed Searching (LP/SLP)

During tape playback, press j / h or

i / g, then press again. The TV/VCR/DVD

will search the tape in high speed.

Press j / h or i / g repeatedly to switch

between regular and high speed searching.

To return to normal playback, press PLAY B.

Viewing a Still Picture

During tape playback, press k .

A still picture will appear on the screen.The picture

Helpful Hints

advances each time you press k .

• SP/LP/SLP means this feature

will work with tapes recorded

in Standard Playback, Long

Playback or Super Long

After a tape is paused for 5 minutes, playback will

stop automatically.This prevents damage to the tape

and TV/VCR/DVD.

Playback. LP/SLP means this

feature will work with tapes

recorded in Long Playback and

Super Long Playback.Tape

speed details are on page 27.

• During forward and reverse

searching, horizontal noise

bars will appear on the screen.

If the still picture vibrates vertically, stabilize

the picture by pressing CH. o or p.

To release the still picture and return to

normal playback, press PLAY B.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 41

Automatic Operation Features 41

The following videotape features are available.

Automatic Rewind, Eject, Off

When you play, fast forward or record a videotape to its end, the TV/VCR/DVD will rewind the tape, stop,

turn itself off, and eject the tape.

If Repeat Play is activated, playback will start again instead.

Details are on page 35.

The tape will not rewind automatically after a timer recording or One-Touch Recording ends.To rewind a tape

after timer recordings, see Auto Return details on page 33.

AutomaticTracking Adjustment

The TV/VCR/DVD automatically adjusts the videotape tracking to give you the best possible picture quality.

With some recordings, however, you may get a better picture using the manual tracking controls (see

below).

ManualTracking

To adjust the tracking manually, press CHANNEL o/p on the front of the TV/VCR/DVD or CH. o/p on

the remote control during playback.

Tracking returns to Automatic Tracking Adjustment when you insert a tape or press STOP C.

Before

Tracking

Adjustment

After

Tracking

Adjustment

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 42

42 Closed Captions

Follow the steps below to select closed captions for TV

programming. Not all TV programs and commercials have

closed captions or all types of closed captions (second

language, half-screen text, etc.). If closed captioning is not

broadcast, you cannot receive it.This does not indicate a

problem with the TV/VCR/DVD. Check your TV program

listings for shows with closed captions.

If the TV/VCR/DVD receives poor quality television signals,

the captions may contain errors, or there might be no

captions at all. Some possible causes of poor quality signals

are:

● Automobile ignition noise

● Electric motor noise

● Weak signal reception

● Multiplex signal reception (ghosts or screen flutter)

● Playing poorly recorded or worn videotapes.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

DISC

RECORD

1-2

1,3

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Press SETUP.

Press ▲ or ▼ to select CAPTION.

– TV/VCR SETUP –

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

B CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

Press ENTER repeatedly to select CAPTION1,

CAPTION2,TEXT1,TEXT2 or OFF.

CAPTION1 displays standard closed captions (what a

character is saying). CAPTION2 displays foreign

language closed captions (foreign language words

showing what a character is saying).

TEXT1 and TEXT2 display half-screen text (such as a

channel guide, schedule or announcement).

OFF turns off closed captions. Captions will not

appear on the screen.

Helpful Hints

• If a black box appears on the

screen, aTEXT mode is

selected. Select CAPTION1,

CAPTION2 or OFF.

• TheTV/VCR/DVD retains the

Closed Caption setting if the

power fails.

• Abbreviations, symbols and

other grammatical shortcuts

may be used in order to keep

pace with the on-screen action.

This is not a problem with the

TV/VCR/DVD.

– TV/VCR SETUP –

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

B CAPTION [CAPTION 1]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

Press SETUP to exit the menu.

• Changing channels may delay

closed captions for a few

seconds.

• Adjusting or muting the volume

may delay closed captions for a

few seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 43

Setting V-Chip 43

TV Rating Settings

V-CHIP enables parents to prevent their children from

watching inappropriate material on TV.V-CHIP reads the

ratings for programming (except for news and sports

programs, unedited movies on premium cable channels, and

Emergency Broadcast System signals), then denies access to

programming if the program’s rating meets the limitations

you select. In this case, a “PROTECTED PROGRAM by ...”

message appears on the TV screen.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

If the “PROTECTED...” message appears during your TV

viewing, change to a channel that is not blocked.Then, you

can access theV-Chip Setup menu and change the settings to

allow all TV viewing.

Programming may be rated by the Motion Picture

Association of America (MPAA) or according to the

Television Parental Guidelines.To block any inappropriate

programming, set your limits in both MPAA RATING and TV

RATING.

PLAY

STOP

DISC

RECORD

1,3

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Before you begin, make sure ...

● The TV/VCR/DVD is on.

● The unit is in TV/VCR mode. Press SELECT on the

remote until you see TV channels and see the red

VCR/TV light on the front of the TV/VCR/DVD.

Press SETUP. Press ▲ or ▼ to selectV-CHIP

SET UP.Then, press ENTER.

– TV/VCR SETUP –

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

B V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

Press the Number buttons to enter the 4-digit

access code. When entering the access code for the

first time or if there has been a power failure, enter

default code 0000. 4 Xs will appear instead of your

code.This protects the identity of your code.

ACCESS CODE

–

TV Rating Explanations

Press ▲ or ▼ to selectTV RATING.

Then, press ENTER.

• TV-Y - Appropriate for all

children

• TV-Y7 - Appropriate for

children seven and older

• TV-G - General Audience

• TV-PG - Parental Guidance

suggested.

– V-CHIP SET UP –

TV RATING

MPAA RATING

CHANGE CODE

• TV-14 - Unsuitable for children

under 14

• TV-MA - Mature audience only

Instructions continue on the next page.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 44

44 Setting V-Chip (cont’d)

Instructions continued from the previous page.

Press ▲ or ▼ to select theTV Rating level at

STANDBY-ON PICTURE SLEEP SELECT

which you want to block viewing, then press

ENTER once. If you press ENTER again, the

CH.

subratings for that category will appear.

Details are on pages 45-46.

+100

When you select the rating category and set it to

BLOCK, the higher ratings will turn to BLOCK

automatically. Lower ratings will turn toVIEW.

When you set “TV-Y” toVIEW (or BLOCK), all

ratings will turn toVIEW (or BLOCK) automatically.

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

DISC

RECORD

TV-Y

TV-Y7

[VIEW]

(

)

[VIEW]

DISPLAY

SETUP

B TV-G

TV-PG

TV-14

[BLOCK]

ENTER

(

)

TITLE

RETURN

REPEAT

TV-MA

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Press SETUP to save your settings and remove

the menus.

Helpful Hints

• If you want to disableV-Chip so

you can view allTV

programming, setTV-Y toVIEW.

• TheV-CHIP settings will be

retained after a power failure

(except the access code reverts

to 0000).

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 45

Setting V-Chip (cont’d) 45

TV Rating Subratings

When you select TV-Y7,TV-PG,TV-14 or TV-MA, you can use

the subratings to block specific elements of programming,

such as language or violence.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Press SETUP.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

Press ▲ or ▼ to selectV-CHIP SET UP.

PLAY

STOP

Press ENTER.

DISC

– TV/VCR SETUP –

RECORD

2,4

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

DISPLAY

SETUP

ENTER

B V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

TITLE

RETURN

REPEAT

ZERO RETURN

CLEAR SEARCH MODE REPEAT

TIME SEARCH

A-B

INDEX SEARCH

AUDIO SUBTITLE ANGLE

MODE

Press the Number buttons to enter the 4-digit

access code. The default code is 0000 (if you have

not set up your own code yet or if there has been a

power failure).

ACCESS CODE

–

Press ▲ or ▼ to selectTV RATING.

Press ENTER.

– V-CHIP SET UP –

B TV RATING

MPAA RATING

CHANGE CODE

Instructions continue on the next page.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 46

46 Setting V-Chip (cont’d)

Instructions continued from the previous page.

Press ▲ or L to select the rating you wish to

STANDBY-ON PICTURE SLEEP SELECT

adjust.Then, press ENTER twice to go to its

subratings.

CH.

Example:

TV-Y7

B FV

[BLOCK]

TV-Y7 subratings

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

DISC

RECORD

● When you selectTV-Y7:

Press ▲ or ▼ to select FV (FantasyViolence, violence

that seems realistic to young children).

Then, press ENTER to select BLOCK orVIEW.

● When you selectTV-PG,TV-14 orTV-MA:

Press ▲ or ▼ to select “D” (Suggestive Dialog),“L”

(Coarse Language),“S” (Sexual Situation) or “V”

(Violence).Then, press ENTER repeatedly to select

BLOCK orVIEW for each subrating.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

To go to the previous menu, press RETURN.

Press SETUP to save your settings and remove the

menus.

Helpful Hints

• Dialog (D) is not an available

subrating for TV-MA.

• Blocked subratings will appear

beside the rating category in

the TV Ratings menu.

• You cannot BLOCK a

subrating (D, L, S orV) if the

main category is set toVIEW.

However, you can set a

subrating toVIEW even when

the main category is set to

BLOCK.

• Changing the category to

BLOCK orVIEW

automatically changes all its

subratings to the same

(BLOCK orVIEW).

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 47

Setting V-Chip (cont’d) 47

MPAA Rating Settings

You can block TV channel viewing according to the Motion

Picture Association ratings.To do so, follow these steps.

STANDBY-ON PICTURE SLEEP SELECT

Press SETUP.

CH.

+100

VOL.

Press ▲ or ▼ to selectV-CHIP SET UP.

Then, press ENTER.

+10

ZOOM

SPEED C.RESET

MUTE

– TV/VCR SETUP –

4-5

1,6

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER'S SET UP

PLAY

STOP

B V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

DISC

RECORD

ZERO RETURN

DISPLAY

SETUP

TIME SEARCH

INDEX SEARCH

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

Press the Number buttons to enter the 4-digit

AUDIO SUBTITLE ANGLE

MODE

access code. (The default code is 0000 if you have

not set up your own code yet or if the power has

failed.)

ACCESS CODE

–

Press ▲ or ▼ to select MPAA RATING.

Then, press ENTER.

– V-CHIP SET UP –

MPAA Rating Explanations

TV RATING

B MPAA RATING

CHANGE CODE

• G - General Audience

• PG - Parental Guidance suggested.

• PG-13 - Unsuitable for children

under 13

• R - Restricted; under 17 requires

accompanying parent or adult

guardian

• NC-17 - No one under 17 admitted

• X - Mature audience only

Press ▲ or ▼ to select the level at which you

want to block viewing.Then, press ENTER to

select BLOCK orVIEW.

When you Block a category, higher ratings turn to

BLOCK automatically. Lower ratings turn toVIEW.

When you set G toVIEW or BLOCK, all ratings turn

toVIEW or BLOCK automatically.

[VIEW]

PG-13

[VIEW]

B R

NC-17

[BLOCK]

Helpful Hints

• To disable all the MPAA

Ratings, set G toVIEW.

• TheV-CHIP settings will be

retained after a power failure

(except the access code reverts

to 0000).

Press SETUP to save your settings and remove

the menus.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 48

48 Setting V-Chip (cont’d)

Changing the Access Code

Although the default code 0000 is supplied with the

TV/VCR/DVD, you can set your own access code.

STANDBY-ON PICTURE SLEEP SELECT

Press SETUP.

CH.

3,5

+100

VOL.

+10

ZOOM

Press ▲ or ▼ to selectV-CHIP SET UP.

Then, press ENTER.

SPEED C.RESET

MUTE

PLAY

STOP

Press the Number buttons to enter the old

access code. When doing this for the first time, use

0000. 4 Xs will appear instead of the code to protect

its identity.

DISC

RECORD

2,4

1,6

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

ACCESS CODE

A-B

AUDIO SUBTITLE ANGLE

MODE

–

Press ▲ or ▼ to select CHANGE CODE.

Then, press ENTER.

– V-CHIP SET UP –

TV RATING

MPAA RATING

B CHANGE CODE

Press the Number buttons to enter your

preferred access code in the NEW CODE

space.Then, enter the same code in the

CONFIRM CODE space. Again, Xs will appear

instead of the code numbers.The access code must

have exactly 4 digits.

TheV-CHIP SET UP screen will reappear.

NEW CODE

X X X X

CONFIRM CODE

– – – –

Helpful Hints

• If you enter the wrong code in

the CONFIRM CODE space,

repeat step 5. Enter the same

new code exactly in the

Press SETUP to save your settings and remove

the menus.

CONFIRM CODE space.

• If you unplug the power cord

or if the power fails, the default

code will be active again (0000).

Change your access code again

as necessary.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 49

Multi-ChannelTelevision Sound (MTS) 49

You can set the TV/VCR/DVD to receive or record TV

programs in Stereo, Second Audio or Monaural Sound. Also,

you can set the TV/VCR/DVD to play videotapes in either

High Fidelity (HIFI) or Monaural (MONO or single-channel)

sound. See pages 50-51 on how to set the sound mode.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Press DISPLAY to see the sound status. During

+100

TV viewing, press DISPLAY twice. During tape

VOL.

playback, press DISPLAY once.

+10

SPEED C.RESET

ZOOM

MUTE

STOP

HIFI

12:00AM

CH 123

STEREO/SAP

PLAY

STOP

DISC

RECORD

COUNT

0:00:00

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

When a TV program is broadcast in stereo, STEREO

appears in the top right corner of the screen.When a

TV program is broadcast in second audio, SAP appears

in the top right corner of the screen.When a TV

program is broadcast both in stereo and second audio,

STEREO and SAP both appear.

A-B

AUDIO SUBTITLE ANGLE

MODE

Although a program may be broadcast in both stereo

and second audio, you cannot record in both stereo

and second audio at the same time.

During tape playback, HIFI will appear in the top left

corner of the screen ifVCR AUDIO is set to HIFI.

Details are on page 50. If you play non-HIFI tapes while

VCR AUDIO is set to HIFI, HIFI will disappear from

the screen.The videotape will play in monaural sound.

You must set the TV/VCR/DVD to record in either

STEREO or SAP. Do this by changing the TV AUDIO

setting as described on page 51.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 50

50 Multi-ChannelTelevision Sound (MTS) (cont’d)

ForTV Audio

STANDBY-ON PICTURE SLEEP SELECT

While receiving an MTS broadcast, press

AUDIO repeatedly to select STEREO, SAP

CH.

(Second Audio Program) or MONO.

+100

VOL.

● The output mode changes as described below every time

you press the button.

+10

ZOOM

SPEED C.RESET

MUTE

STEREO

SAP

MONO

PLAY

STOP

DISC

RECORD

DISPLAY

SETUP

● The current mode appears on the TV screen for about 5

seconds.

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Helpful Hint

• The initial setting is STEREO.

• When recording a TV

program,TV/VCR/DVD

records MTS broadcasts in

HIFI stereo sound

automatically unless you select

SAP mode recording

beforehand.

• This setting is saved even if the

until is turned off.

• If you select second audio

when second audio is not

available, the TV/VCR/DVD

will receive and record normal

audio.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 51

Multi-ChannelTelevision Sound (MTS) (cont’d) 51

ForVCR Audio

STANDBY-ON PICTURE SLEEP SELECT

During playback of a videotape, press AUDIO

to select HIFI or MONO.

CH.

● The current mode appears on the TV screen for

about 5 seconds.

● The initial setting is HIFI.

+100

VOL.

+10

SPEED C.RESET

ZOOM

● This setting is saved until the cassette is ejected.

MUTE

PLAY

STOP

For External Devices

● Pressing AUDIO does not affect the audio output

mode of an external device.

DISC

RECORD

DISPLAY

SETUP

● The current audio output mode of an external

device does not appear on theTV screen.

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Helpful Hints

• Non-HIFI tapes will play in

monaural automatically.

• When playing a non-HIFI tape,

pressing AUDIO will only

affect the display shown on

the TV screen but it does not

affect the actual sound mode.

• MTS broadcasts automatically

record in HIFI unless you

select SAP before recording.

Details are on page 50.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 52

52 DVD Disc Menus,Title Menus

Disc Menus

Some DVDs contain menus that describe the contents of the

disc or allow you to customize disc playback. For example,

the menu may offer choices for subtitle languages, special

features or scene selection.

To use the DVD disc menu and select playback features,

follow these steps.

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

Press DISC MENU.

DISC

The DVD’s disc menu will appear.

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

Press ▲, ▼, s or B to select an item, then

CLEAR SEARCH MODE REPEAT

press ENTER. Continue this process to set up all

A-B

the features you want or to start disc playback.

AUDIO SUBTITLE ANGLE

MODE

Title Menus

Some DVDs have a title menu, which lists the titles available

on the DVD. Use the title menu to play a specific Title.

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

PressTITLE. The title menu will appear.

+10

SPEED C.RESET

ZOOM

If a title menu is not available, the “X” may appear on

MUTE

the TV screen. Or, if the DVD only has a main menu

as described above, it may appear when you press

TITLE.

PLAY

STOP

DISC

RECORD

Press ▲, ▼, s or B to select a title, then press

ENTER. Playback will begin at the title you selected.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Helpful Hints

• Menus vary among discs. Follow

the information with the DVD.

• Not all DVDs have disc or title

menus.

• Some DVDs may refer to

chapters as “scenes.” Some

DVDs may refer to the title

menu as the “scene index.”

• TITLE may not be active with all

DVDs.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 53

Fast Forward/Reverse Search 53

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

STANDBY-ON PICTURE SLEEP SELECT

During playback, press and hold i/g or

CH.

j/h on the remote control to fast forward

or fast reverse the picture.

+100

VOL.

●

For DVD playback, each time you press and hold the

button, it will increase the speed by approximately 2, 8,

20, 50 or 100 times the normal speed.The speed may

vary depending on the disc.

+10

ZOOM

SPEED C.RESET

MUTE

PLAY

STOP

will appear briefly on the TV screen to indicate

forward searching. Or, 1, 2, 3,

or 5 will indicate reverse searching.

4 or

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

For DVD playback, the sound will be mute during

the search.

● ForVideo CDs,Audio CDs or MP3 playback, the

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

speed will increase by 2,8 or 30 times the normal

speed. The speed may vary depending on the disc.

g 1, g 2 or g 3 will appear briefly on the

TV screen to indicate forward searching. Or,

h 1, h 2 or h 3 will indicate reverse

searching.

For MP3 or Audio CD playback, the sound will be

intermittent during the search.

Example: Playing a DVD in

reverse at twice the normal

playing speed.

Press PLAY B to return to normal playback.

Helpful Hint

• If you use i/g or j/h

during Dual Playback, JPEG

playback will be paused.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 54

54 Title/Chapter Playback, SpecificTime Playback

Title/Chapter Playback

● Before you begin, press SELECT to put the

STANDBY-ON PICTURE SLEEP SELECT

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

CH.

During DVD playback, press SEARCH MODE

until CH (for chapter) or TT (for title) appears on the

1 _{TV. The number of available titles or chapters will}

+100

VOL.

appear at the right ( /4, for example).

+10

SPEED C.RESET

ZOOM

_/4

MUTE

PLAY

STOP

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

Enter the title or chapter number using the

Number buttons. The title or chapter will play.

CLEAR SEARCH MODE REPEAT

A-B

● To select a single-digit title/chapter number when

there are more than 10 tracks, press ENTER to

play the title/chapter.

AUDIO SUBTITLE ANGLE

MODE

● If you enter a title/chapter number that is not avail-

able on the disc, playback will not begin (or the

current title/chapter will continue to play).

4 / 4

12 / 17

STANDBY-ON PICTURE SLEEP SELECT

SpecificTime Playback

CH.

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode.The green DVD light will

appear on the front of the TV/VCR/DVD.

+100

VOL.

+10

SPEED C.RESET

ZOOM

During DVD,Audio CD orVideo CD (without

PBC) play, press SEARCH MODE until the Time

1 _{Search display appears.}

MUTE

PLAY

STOP

DISC

_:_ _:_ _

TOTAL 1:29:00

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Within 30 seconds, use the Number buttons to

enter the elapsed playing time (of the track or

2 _{title) at which you want play to begin. Enter the}

time in hours, minutes and seconds. Within a few

seconds, playback will start at the specified time.

● Example: 1 hour, 23 minutes and 30 seconds

1 → 2 → 3 → 3 → 0

Helpful Hints

• When playback is stopped, use

the Number buttons to select a

title for immediate playback.

During playback, use the

Number buttons to choose a

chapter for immediate playback.

• Title/chapter playback is not

available with some DVDs.

● Make sure the time you enter is within the total time

of the current title or track. If it is not, the time

space will clear and playback will continue at its

current point. The total time available in the current

track or title will appear in the Time Search display.

● If you make a mistake entering the time, press CLEAR

to clear the time area. Enter the correct information

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 55

Track Playback 55

There are three ways to play a specific Audio CD,Video CD

(without PBC), MP3 or JPEG track: Use the Number buttons,

SEARCH MODE or j/h and i/g .

STANDBY-ON PICTURE SLEEP SELECT

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD. Make sure a

valid disc is in the disc tray.

CH.

A-B

+100

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

PLAY

STOP

Using the Number Buttons

Press the Number buttons to enter a track number.

Playback will start at the selected track.

DISC

RECORD

DISPLAY

SETUP

For tracks 10 and above, press the +100/+10 button so the

Search display (TR _ _ /12 - an example of total tracks) appears

on the TV. Press the Number button of the first digit, then press

the Number button of the second digit. For example, to playback

track 26, press +100/+10, then Number 2, then Number 6.

For single-digit tracks (1-9), press a single Number button.

If you enter a track number that is not available on the disc,

playback will not begin (or the current track will continue to

play).

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Using SEARCH MODE

Press SEARCH MODE so theTrack Search Display (TR)

appears. Within 30 seconds, press the Number buttons

to select the track number. Playback will begin at the

selected track. For a single-digit track (1-9), enter 0 first. For

example, to play track 5, press 0, 5. You do not have to use the

+100/+10 button in Search Mode for tracks 10 and above.

Using j/E and i/g

During playback, press i/g to skip the current

track and move to the next track.

Press j/h to return to the beginning of the

current track or to go to previous tracks.

Helpful Hints

and G /

•

does

not function when playback is

stopped.

• You cannot use G /g to

go from the last track on the

disc to the first track.

• Using H/

or G /

will only affect MP3 files during

Dual Playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 56

56 Paused and Step-by-Step Playback, Resume On

Paused and Step-by-Step Playback

● Before you begin, press SELECT to put the

STANDBY-ON PICTURE SLEEP SELECT

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

CH.

During disc playback, press F .

Playback will pause and the sound will be mute.

● Pressing F once during Dual Playback will pause a

JPEG file only. Pressing F one more time will pause

an MP3 track.

+100

VOL.

+10

1-2

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

Press k repeatedly to see a DVD orVideo CD

picture advance one frame (or step) at a time.

The sound will remain mute.

Pressing k repeatedly during Audio CD, MP3 or JPEG

playback will have no effect.

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

Press PLAY B to resume playback.

AUDIO SUBTITLE ANGLE

MODE

Resume On

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Press STOP C during playback. In a few seconds,

the following Resume message will appear on the TV

+100

VOL.

screen.

+10

SPEED C.RESET

ZOOM

For DVD,AudioCD orVideoCD:

For MP3 or JPEG:

MUTE

PLAY

STOP

DISC

Press 'PLAY' to play from here.

To play the beginning,

press 'STOP' first and then 'PLAY'.

Press 'PLAY' to play from the

beginning of current track.

To play the beginning,

RECORD

press 'STOP' first and then 'PLAY'.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

-B

Press PLAY B. In a few seconds, playback will

resume from the point at which it stopped last.

You can resume playing at the same point even if you

turn off the DVD/VCR, then turn it on again later.

However, opening the disc tray will cancel the

Resume feature. Playback will start at the beginning

the next time you insert the disc.

AUDIO SUBTITLE ANGLE

MODE

For MP3 and JPEG, the playback will resume from the

beginning of the current track.

To cancel Resume and start playing the disc from the

beginning, press STOP C again while playback is

stopped. The Stop symbol (C) will appear briefly on

the TV screen. Press PLAY B to start playing the disc

from the beginning.

The resume information will be saved even when the

power is turned off.

Helpful Hint

• Set STILL MODE to FIELD in

the Display menu if paused

images are blurry. Details are

on pages 70-71.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 57

Repeat, A-B Repeat 57

Repeat

STANDBY-ON PICTURE SLEEP SELECT

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

CH.

During playback, press REPEAT until the repeat

+100

VOL.

mode you want appears on the TV.

+10

On a DVD, select CHAPTER,TITLE or OFF.

SPEED C.RESET

ZOOM

MUTE

On an Audio CD andVideo CD (without PBC), select

TRACK,ALL (all tracks on the disc) or OFF.With

MP3 or JPEG files, select TRACK, GROUP (all tracks

in the current folder),ALL or OFF.

PLAY

STOP

DISC

RECORD

Selecting a new track, chapter or title will cancel

repeat playback.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Example: Repeat a

DVD chapter

Example: Repeat an

Audio CD or

Video CD track

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

DISC

RECORD

A-B Repeat

DISPLAY

SETUP

ENTER

Follow these steps to play a section of a DVD, Audio CD or

Video CD repeatedly.

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

During disc playback, press REPEAT A-B to set

1-3

the starting point (A). If you make a mistake,

press CLEAR. This will erase point A and let you

start over.

screen.

OFF will appear briefly on the TV

Helpful Hints

A –

• Repeat and A-B Repeat are not

available with some discs.

• A-B Repeat is not available with

MP3 tracks.

• The entire A-B Repeat section

must be within a single title or

track. If you do not enter Point

B before the end of the track or

title is reached, the end of the

track or title will become Point

B automatically.

Play the disc to the point at which you want

repeated playback to end, then press REPEAT

A-B again. Within a few seconds, the section will

begin to play.The segment will play over and over

until you cancel the A-B Repeat feature.

• Stopping playback will cancel

A-B Repeat.

A – B

• If you choose GROUP Repeat

during Dual Playback, all tracks

or files in each folder will play

repeatedly. For example if you

choose GROUP Repeat during

Dual Playback of MP3 folder A

and JPEG folder B, all MP3

tracks in folder A and all JPEG

files in folder B will be repeated.

To cancel A-B Repeat Playback, press REPEAT

A-B so

OFF appears on theTV screen.

Regular playback will resume.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 58

58 Markers

Use Markers to remember your favorite places on a DVD,

an Audio CD or aVideo CD (without PBC). To set the

Markers, follow these steps.

STANDBY-ON PICTURE SLEEP SELECT

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode.The green DVD light will

appear on the front of the TV/VCR/DVD.

CH.

+100

VOL.

Play the disc to within 30 seconds prior to the point

+10

ZOOM

at which you want to set the Marker. During

SPEED C.RESET

MUTE

playback, press SEARCH MODE until the

Markers appear at the top of the TV screen.

PLAY

STOP

DISC

RECORD

2-4

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

3-4

Example: DVD

Within 30 seconds, press s or B to select a

Marker (1-10). Make sure _ _ _ _ :_ _ :_ _ appears

beneath the number.

Let the disc playback to the point at which

you want to set the Marker (up to 30 seconds

away).

When the disc reaches the point you want to

remember, press ENTER. The title or track

number and its elapsed playing time will appear

beneath the markers.

A checkmark will replace the Marker number.

The Marker display will disappear in about 30

seconds, or press SEARCH MODE again to remove

the Marker display.

Helpful Hints

• Opening the disc tray,

switching to TV/VCR mode, or

turning off the TV/VCR/DVD

will erase all the Markers.

• To erase a single Marker, press

SEARCH MODE until you see

the Markers. Press s or B to

select a Marker. Press CLEAR.

Press RETURN to remove the

display.

• To erase all the Markers, press

SEARCH MODE until you see

the Markers. Press B to select

AC (All Clear), then press

ENTER. Press SEARCH

Example: DVD

Example:Audio CD

orVideo CD

To return to a Marker during playback, press

SEARCH MODE until you see the Markers.

Press s or B to choose the Marker you want,

then press ENTER. Disc playback will continue

from the marked point.

MODE or RETURN to

remove the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 59

Subtitles, Camera Angles 59

Subtitles

You can select a language for DVD subtitles during playback.

You may select only the subtitles that are available on the

DVD.

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

During playback, press SUBTITLE repeatedly

MUTE

to select a subtitle language. The number of

PLAY

STOP

available languages appears at the right of the subtitle

display.

In the example below, six languages are available

( /6).After a few seconds, the subtitles will appear.

Or, press SUBTITLE repeatedly to turn off Subtitles.

When no subtitles are available,“NOT AVAILABLE”

appears at the right of the subtitle display.

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

+10

Camera Angles

SPEED C.RESET

ZOOM

Some DVDs contain scenes recorded from different angles.

The camera angle will not change if the DVD does not

contain sequences recorded from different perspectives.

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

MUTE

PLAY

STOP

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

During DVD playback, press ANGLE

CLEAR SEARCH MODE REPEAT

repeatedly to select a different angle. The

A-B

AUDIO SUBTITLE ANGLE

MODE

number of available angles appears at the right of the

Angle display. In this example, eight angles are

available ( /8).

Helpful Hints

• With some DVDs, you must

select a subtitle language in the

disc menu.

• If the desired language does not

appear after pressing SUBTITLE

several times, the disc does not

have subtitles in that language.

• Opening the disc tray will

cancel your subtitle setting.

• If the ANGLE ICON setting is

ON,

will appear on theTV

screen when the current

portion of the disc has multiple

camera angles.

To set the ANGLE ICON ON

or OFF, see pages 77-78.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 60

60 Slow Motion, Zoom

Slow Motion

STANDBY-ON PICTURE SLEEP SELECT

Press F during DVD orVideo CD playback.

CH.

Press and hold i/D or H/h for a few

seconds. Slow motion playback will begin. Press

+100

VOL.

i/D or H/h repeatedly to play the DVD

+10

forward or backward at approximately 1/16, 1/8 or

1/2 the normal speed. Reverse slow motion is not

available on aVideo CD.

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

1 (1/16),

2 (1/8) or

3 (1/2) will appear

DISC

briefly on the TV screen to indicate slow forward

playback.

RECORD

DISPLAY

SETUP

1 (1/16),

2 (1/8) or

3 (1/2) will

ENTER

TITLE

RETURN

REPEAT

indicate slow reverse playback.

CLEAR SEARCH MODE REPEAT

-B

AUDIO SUBTITLE ANGLE

MODE

Example: Playing a DVD forward

at half the normal speed.

STANDBY-ON PICTURE SLEEP SELECT

Press PLAY B to return to normal playback.

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

Zoom

1,3

PLAY

STOP

Zooming lets you enlarge the playback image of a DVDs,

Video CDs or JPEG CDs, and lets you pan through the

enlarged image.

DISC

RECORD

DISPLAY

SETUP

ENTER

Press ZOOM during playback.

ZOOM1 will

TITLE

RETURN

REPEAT

appear on the screen. The picture will be 1.3 times

larger. Press ZOOM again to increase the picture to

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

twice the regular size.

ZOOM2 will appear.

MODE

Press ZOOM again to increase the picture to 4 times

the regular size.

ZOOM3 will appear.

Helpful Hints

ZOOM 1

ZOOM 2

ZOOM 3

• The sound will be mute during

slow motion playback.

• The gray box with an inner blue

box that shows during Zoomed

playback is the position guide.

To remove it or show it, press

ENTER.The position of the blue

box inside the gray box

indicates the position of the

zoomed image within the

overall picture.

• The x4 zooming is not active

with some discs. x1. 3 and x2

zooming is available forVideo

CDs. Only x2 zooming is

available for JPEGs.

• Position guide is not available

for JPEG playback.

Zoom x1.3

Zoom x2

Zoom x4

Press ▲, ▼, s or B to move the zoomed

image up, down, left or right.

Position guide example:

The Zoomed area is in

the top portion of the

overall picture.

To return the picture to its normal size, press

ZOOM repeatedly.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 61

Audio Language, Stereo Sound 61

Audio Language

You can select a language for DVDs during playback if

multiple languages are available.

STANDBY-ON PICTURE SLEEP SELECT

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

CH.

+100

VOL.

During DVD playback, press AUDIO repeatedly

+10

ZOOM

to choose one of the available languages. Audio

SPEED C.RESET

MUTE

display appears at the top of the TV screen, and the

new audio will be heard.The display will disappear

after about 5 seconds.

PLAY

STOP

DISC

The Audio display may show the current settings for

the Dolby Digital or multi-channel (5.1CH) sound, if

they are available on the disc, and the sampling rate of

the disc.The number of available languages appears

after the “ / ” at the right of the display ( /3, for

example).

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

1.ENG Dolby D 3/2.1ch 48k/3

STANDBY-ON PICTURE SLEEP SELECT

Stereo Sound

Adjust Stereo Sound to determine whether you will hear the

left channel, the right channel or both channels (stereo)

during Audio CD orVideo CD playback.

CH.

+100

VOL.

+10

Press AUDIO repeatedly during Audio CD or

SPEED C.RESET

ZOOM

MUTE

Video CD playback to choose STEREO, L-ch or

R-ch. The display will disappear in about 5 seconds.

PLAY

STOP

DISC

RECORD

STEREO

DISPLAY

SETUP

Both right and left channels

are heard (stereo).

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

L-ch

AUDIO SUBTITLE ANGLE

MODE

Only the left channel is heard.

R-ch

Helpful Hints

Only the right channel is heard.

• If a language is not available after

pressing AUDIO several times,

the DVD does not have that

language.

• Some DVDs only let you change

the language in the disc menu.

• Audio languages may be

abbreviated (such as ENG for

English). Or, 3 dashes (- - -) may

appear instead of an

abbreviation.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 62

62 On-Screen Displays

DVD Display

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Press DISPLAY repeatedly to see the following

displays during DVD playback.

+100

VOL.

CH 7/49 0:01:46 -0:03:27

+10

SPEED C.RESET

ZOOM

Elapsed playing time

of the current chapter;

remaining playing time

of the current chapter

CH (chapter):

Current chapter number

/ total chapters

MUTE

PLAY

STOP

DISC

RECORD

TT 1/2 0:00:00 -1:23:45

DISPLAY

SETUP

ENTER

TT (title):

Elapsed playing time of the

current title; remaining playing

time of the current title

1-2

TITLE

RETURN

REPEAT

Current title number

/ Total titles

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

BIT RATE: The amount of audio

and video data currently being read.

C L0

Layer number, appears

only when playing a

two-layered disc.

L0: Layer 0 is playing

L1: Layer 1 is playing

Current Repeat setting, if active

C: Chapter repeat

T: Title repeat

B: A-B repeat

Press DISPLAY repeatedly or press RETURN

to remove the display.

STANDBY-ON PICTURE SLEEP SELECT

Audio CD andVideo CD Display

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

CH.

+100

Press DISPLAY repeatedly to see the following

VOL.

displays during Audio CD orVideo CD

+10

SPEED C.RESET

ZOOM

(without PBC) playback.

MUTE

PLAY

STOP

TR 4/12 0:03:21 -0:02:15

TR (track):

Current track number

/ total tracks

Elapsed playing time

of the current track;

remaining playing time

of the current track

DISC

RECORD

DISPLAY

SETUP

ENTER

1-2

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

ALL 4/12 0:13:45 -0:45:40

A-B

Current Repeat setting, if active

T: Track repeat

A: All tracks repeat

AUDIO SUBTITLE ANGLE

MODE

ALL:

Current track number

/ total tracks

B: A-B repeat

Elapsed playing time

of the current CD;

remaining playing time of

the current CD

Press DISPLAY repeatedly or press RETURN to

remove the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 63

On-Screen Displays (cont’d) 63

MP3/JPEG Displays

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Press DISPLAY until the current track or file

information appears.

+100

VOL.

+10

JPEG File name

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

DISC

RECORD

MP3 Track name

DISPLAY

SETUP

ENTER

1-2

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

TR 2/25 0:01:15

Current repeat setting

TR (track):

Current track number

/Total tracks

Elapsed playing time

of the current track

(for MP3 only)

Example: MP3 track

The following may appear to indicate Repeat playback.

T: The current track will play repeatedly.

G: Tracks in the current folder (group) will play

repeatedly.

A: All tracks will play repeatedly.

only during PROGRAM Playback

only during RANDOM Playback

only during FOLDER Playback

● Program and Random Playback is available only when

DUAL PLAYBACK is OFF.

● Folder Playback is available only when DUAL

PLAYBACK is ON.

Helpful Hint

• For MP3 files recorded in

Variable Bit Rate (VBR), the

elapsed time displayed on the

screen may vary from the

actual elapsed time.

Press DISPLAY again to remove the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 64

64 Black Level,Virtual Surround, Initializing

Black Level

Adjust Black Level to brighten the DVD and Video CD picture

during playback.

PLAY

STOP

During DVD orVideo CD playback, press MODE

DISC

so the Black Level icon shows on theTV screen.

RECORD

DISPLAY

SETUP

OFF

ENTER

TITLE

RETURN

REPEAT

Within 10 seconds, press s , B, or ENTER

repeatedly to choose ON or OFF. ON brightens

the dark parts of the picture. OFF shows the original

picture as recorded.

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Virtual Surround

You can enjoy improved stereo sound when you play DVDs,

Audio CDs,Video CDs or MP3 files recorded in Dolby Digital

or Pulse Code Modulation (PCM). Check the disc case for

details on availability.

PLAY

STOP

DISC

During disc playback, press MODE repeatedly until

RECORD

theVirtual Surround icon appears on theTV screen.

DISPLAY

SETUP

ENTER

OFF

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

While theVirtual Surround icon appears, press

A-B

AUDIO SUBTITLE ANGLE

MODE

s , B or ENTER to choose 1, 2 or OFF. The

default setting is OFF.The icon will disappear after

about 10 seconds.

Initializing

You can return all the DVD player’s Setup menu items (except

for PARENTAL) to their default settings.

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode.The green DVD light will

appear on the front of the unit.

While playback is stopped, press SETUP twice.

The QUICK SETUP screen appears.

PLAY

STOP

DISC

RECORD

QUICK SETUP

2,3

1,4

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

BITSTREAM

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

Press s or B to select INIT. (INITIALIZE) at the

top of the menu, then press ENTER.

AUDIO SUBTITLE ANGLE

MODE

INITIALIZE

Initialize?

YES

ENTER

Helpful Hints

• For Audio CDs andVideo

CDs, you can adjustVirtual

Surround only if you set

Stereo Sound to STEREO.

Details are on page 64.

• The Black Level andVirtual

Surround settings will be saved

even if the player is turned off.

Press K or L to selectYES.Then, press ENTER

twice. To cancel, select NO instead.

INITIALIZE

Initialize?

YES

ENTER

Press SETUP to remove the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 65

Random Playback, Program Playback 65

Random Playback

You may play Audio CD, JPEG or MP3 tracks in Random order

instead of the order in which they are recorded (1,2,3...).

STANDBY-ON PICTURE SLEEP SELECT

● Before you begin, press SELECT to put the TV/VCR/DVD

in DVD mode. The green DVD light will appear on the front

of the TV/VCR/DVD.

CH.

While playback is stopped, press MODE until the

+100

VOL.

RANDOM screen appears.

+10

ZOOM

SPEED C.RESET

MUTE

CD-DA

TOTAL 1:03:30

PLAY

STOP

DISC

RECORD

DISPLAY

SETUP

ENTER

Example:Audio CD

TITLE

RETURN

REPEAT

While the RANDOM screen appears, press

PLAY B. The tracks will play in random order.After all

2 _{the tracks have played once, playback will stop.}

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Program Playback

You may determine the order in which Audio CD, MP3 or JPEG

tracks will play. To set a program, follow these steps.

● Before you begin, press SELECT to put theTV/VCR/DVD in

DVD mode. The green DVD light will appear on the front of the

TV/VCR/DVD.

While playback is stopped, press MODE until the

PROGRAM screen appears.

Helpful Hints

Press ▲ or ▼ to select a track you want to play,

then press ENTER.

• You cannot use the Number

buttons or SEARCH MODE to

select another track while playing a

program. Press j/h or

i/g to select other tracks in

the program.

• You cannot combine random

playback with programmed

playback.

• You may play a program or a track

within a program repeatedly.

During programmed playback,

press REPEAT so ALL (all tracks in

the program) orTRACK

appears.The entire program or the

current track will play over and

over.

• You cannot alter a program during

playback.

• You can start program playback

only while in the PROGRAM

screen.

• A program can have a maximum of

99 tracks.

• To erase all tracks in the program,

select ALL CLEAR at step 2.

• Program/Random playback of MP3

or JPEG tracks is not available

while Dual Playback is ON.

CD-DA

TOTAL 1:03:30

3:30

4:30

5:00

3:10

5:10

1:30

2:30

3:30

5:10

10 4:20

11 3:00

12 3:20

17 4:10

22 2:50

ENTER

2/3

1/4

3:30

Example:Audio CD

Press CLEAR to erase the last track in the program if you

make an error.

Additional tracks may be on other screens. press

to go

on to the next page, and press

ous page.

to go back to the previ-

Repeat this step until you have selected all the tracks you

wish to play in the program.

To see tracks in a program when there are more than

eight tracks, use j/h and i/g to see all the

tracks.

For MP3 or JPEG folders, press s or B to go to the pre-

vious or next level of folders. Press TITLE to return to the

first item in the highest level.

Press PLAY B. The tracks will play once in the order you

set.Turning off theTV/VCR/DVD or opening the disc tray

3 _{will erase the program. You can start program playback only}

while in the PROGRAM screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 66

66 MP3/JPEG Playback

The DVD player will play MP3 and JPEG files that you record

and finalize on a CD-RW (Compact Disc-Rewritable) or

CD-R (Compact Disc-Recordable).

STANDBY-ON PICTURE SLEEP SELECT

These discs may contain pictures in a JPEG format or audio

tracks in an MP3 format. For example, you may have

photographic film developed by a retailer that places the

pictures on a CD-R for you. These pictures may be in JPEG

format.

Or, you may copy or download MP3 music files from certain

legal Internet sites, then copy those files onto a CD-R or

CD-RW.

You cannot make or record such discs using the

TV/VCR/DVD. See your computer manual for details on

recording.

Keep these characteristics in mind when making discs you

intend to play on the DVD player of the TV/VCR/DVD.

● Record MP3 tracks at a sampling frequency of 44.1 kHz or

48 kHz. Record in a constant bit rate between 32 kbps

and 320 kbps.

CH.

+100

VOL.

+10

ZOOM

SPEED C.RESET

MUTE

PLAY

STOP

DISC

RECORD

1-2

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

● When recording JPEG files, the size of the picture should

be between 32 x 32 and 6300 x 5100 dots.

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

When you put a CD-RW or CD-R with MP3 or JPEG

files in the TV/VCR/DVD, a file list will appear on the

Helpful Hints

TV screen when you press DISC MENU (If you use

• JPEG images and MP3 tracks

are known as files. Groups of

files are called folders.

PLAY B to close the disc tray, playback may start

automatically). Press K or

MP3 track or JPEG file.

to select a folder,

• Folders have the icon.

If you choose a track or file, press PLAY B or

ENTER. Starting with the track or file you selected,

the tracks/files will play in the order they were

recorded, i.e. 1, 2, 3.

• MP3 tracks have the icon.

• JPEG files have the icon.

• A maximum of 255 folders can

be recognized.A maximum of

999 files can be recognized.

• During playback, press the

Number buttons to select

another track. Or, press

If you select a folder and press ENTER, the

tracks or files within that folder will appear.

Press K or L to select the track or file you

want, then press PLAY

or ENTER.

● Press TITLE to return to the first item in the

highest level of folders or files.

j/h or i/g to

change tracks. If a track is not

available,“X” may appear on the

TV screen, and playback may

resume at an incorrect track or

may continue with its current

track.

• SpecificTime playback is not

possible with MP3 tracks.

• Progressive JPEGs (JPEG files

saved in the progressive format)

will not play on this DVD player.

• High resolution JPEG files takes

longer to be displayed.

● Press { or B to return to previous or next levels.

● To change the TRANSITION MODE of JPEG

playback, press MODE during playback. Then press

{ , B or ENTER to switch CUT IN/OUT and

FADE IN/OUT. If you choose CUT IN/OUT, the

images will cut in and out sharply as playback

progresses. If you choose FADE IN/OUT, the

images will fade in and out as playback progresses.

●

To change the size of the playback image, press MODE

repeatedly until SIZE CHANGE MODE appears on top

of theTV screen during playback. Then press

{

ENTER to switch between NORMAL(100%) and

SMALL(95%).

• SIZE CHANGE MODE may

have no effect on some files (e.g.

files with a small picture size).

● Press MODE repeatedly to remove the display.

● During JPEG playback, press { or B to rotate a

picture 90 degrees clockwise or counter-clockwise.

To stop play, press STOP C.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 67

MP3/JPEG Playback (cont’d) 67

Dual Playback

This feature lets you play MP3 and JPEG files simultaneously.

Available only when DUAL PLAYBACK is ON.

See pages 77-78 on how to set the DUAL PLAYBACK ON

or OFF.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

Press SELECT to put the DVD/VCR in DVD

VOL.

mode.

+10

SPEED C.RESET

ZOOM

DVD light will appear on the front of the DVD/VCR.

MUTE

PLAY

STOP

Press DISC MENU during MP3/JPEG playback.

A file list will appear.

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

Press or to select a desired JPEG file/an

MP3 track from the List and press PLAY B or

ENTER.

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

To stop playback, press STOP C.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Folder Playback

You may select to play a folder.

Available only when DUAL PLAYBACK is ON.

See pages 77-78 on how to set the DUAL PLAYBACK ON

or OFF.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

Press SELECT to put the DVD/VCR in DVD

DISC

mode.

RECORD

DVD light will appear on the front of the

DVD/VCR.

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

While playback is stopped, press MODE.

A folder list will appear.

A-B

AUDIO SUBTITLE ANGLE

MODE

Press K or L to select a folder, then press

PLAY B or ENTER.

Helpful Hints

● MP3 tracks and JPEG files in the selected folder will

• If you press PLAY B directly after

you inserted a disc which contains

both MP3 tracks and JPEG files

and if the DUAL PLAYBACK

setting is ON, Dual Playback will

start automatically.

play simultaneously.

• Zooming or rotating a JPEG file

during Dual Playback may cause

an intermittent sound.

• Dual Playback may not function

properly if MP3 and JPEG files on

the disc interfere each other due

to the difference in their data size.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 68

68 Language Settings

You can use the LANGUAGE settings to select different languages for

the Audio or Subtitles of DVDs, as well as languages for DVD disc

menus.

STANDBY-ON PICTURE SLEEP SELECT

● Before you begin, press SELECT to put the TV/VCR/DVD in

DVD mode. The green DVD light will appear on the front of the

TV/VCR/DVD.

CH.

Press SETUP once so theTV/VCR SETUP menu appears.

+100

– TV/VCR SETUP –

VOL.

+10

ZOOM

B TIMER PROGRAMMING

SETTING CLOCK

SPEED C.RESET

USER'S SET UP

MUTE

LANGUAGE [ENGLISH]

ZERO RETURN

PLAY

STOP

DISC

RECORD

3-5

1-2

While playback is stopped, press SETUP again.

DISPLAY

SETUP

The QUICK SETUP screen appears.

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

A-B

QUICK SETUP

AUDIO SUBTITLE ANGLE

MODE

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

BITSTREAM

ENTER

Press s or B to select CUSTOM at the top of the

menu, then press ENTER.

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

ENTER

(LANGUAGE) will be selected. Press ENTER.

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

ENTER

Press or to select AUDIO, SUBTITLE or DISC

MENU.Then, press ENTER. The language options for the

selected item will appear.

LANGUAGE

AUDIO

LANGUAGE

DISC MENU

ENGLISH

FRENCH

SPANISH

GERMAN

ITALIAN

ORIGINAL

ENGLISH

FRENCH

SPANISH

GERMAN

ITALIAN

Helpful Hints

ENTER

• If the DVD’s default settings

for Audio and Subtitle are the

same language, the subtitles

may not show unless you turn

them on.

SWEDISH

DUTCH

SWEDISH

AUDIO:

DISC MENU:

The DVD’s audio plays

in the selected language.

A DVD’s disc menu appears

in the selected language.

• Use AUDIO and SUBTITLE to

select Audio and Subtitles

available on the DVD. Details

are on pages 59 and 61.

LANGUAGE

SUBTITLE

OFF

ENGLISH

FRENCH

SPANISH

GERMAN

ITALIAN

SWEDISH

ENTER

• If you set AUDIO to

ORIGINAL, the default setting

of the DVD Audio will play.

SUBTITLE:

Subtitles appear in the

selected language.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 69

Language Settings (cont’d) 69

Press K or L to select a language, then press

ENTER. The language lists may continue on multiple

screens. Press K or L to move to the other screens.

● If you select OTHER, press four Number buttons

to enter the code for the language you desire. Use

the Language Codes below. The language or

language code you select will appear in the

Language menu beside AUDIO, SUBTITLE or

DISC MENU.

STANDBY-ON PICTURE SLEEP SELECT

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

LANGUAGE

LANGUAGE CODE

DISC

RECORD

Please enter a 4-digit language code.

ENTER

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

● You can select other languages for AUDIO,

SUBTITLE and DISC MENU only if the language is

available on the disc. If the language is not

recorded on the DVD, changing these settings will

have no effect.

A-B

AUDIO SUBTITLE ANGLE

MODE

Press SETUP to exit the menu.

Language Codes

A-B

English

5160 Kannada

5161 Kashmiri

5166 Kazakh

5760 Panjabi

6247

Abkhazian

Afar

4748 Esperanto

4747 Estonian

5765 Pashto

5757 Persian

6265 Tagalog

5247 Tajik

6258 Tamil

6658

6653

6647

6666

6651

6654

4861

6655

6661

6665

6664

6657

6669

Afrikaans

Albanian

Amharic

Arabic

Armenian

Assamese

Aymara

4752

F-H

Kinyarwanda 6469 Polish

6563 Faroese

4759 Fiji

5261 Kirghiz

5256 Kirundi

5255 Korean

5264 Kurdish

5271

5771 Portuguese 6266 Tatar

6460 Pushto

5761 Quechua

6265 Telugu

6367 Thai

4764 Finnish

5471 French

4765 Frisian

5767 Rhaeto-Romance 6459 Tibetan

L-N

Romanian

5861 Russian

5847

6461 Tigrinya

6467 Tonga

Tsonga

4771 Gaelic (Scots) 5350 Laothian

Azerbaijani 4772 Galician

Bangla

5358 Latin

4860 Georgian

4847 German

5167 Greek

5747 Latvian

5051 Lettish

5158 Lingala

5868

Turkish

Bashkir

Basque

Bengali

Bhutani

Bihari

Bislama

Breton

Bulgarian

Burmese

5868 Samoan

5860 Sangho

5866 Sanskrit

6559 Turkmen

6553 Twi

6547

4860 Greenlandic 5758 Lithuanian

U-Z

5072 Guarani

4854 Gujarati

4855 Hausa

4864 Hebrew

4853 Hindi

5971 Hungarian

5360 Macedonian 5957 Serbian

5367 Malagasy

5447 Malay

6564 Ukrainian

5953 Serbo-Croatian 6554 Urdu

6757

6764

6772

5965 Sesotho

5958 Setswana

5966 Shona

6566 Uzbek

6660 Vietnamese 6855

5569 Malayalam

5455 Maltese

5467 Maori

Marathi

5565 Moldavian

5560 Mongolian

5547 Nauru

5551 Nepali

6560 Volapuk

6550 Welsh

6555 Wolof

6565 Xhosa

6557 Yiddish

6558 Yoruba

6561 Zulu

5165

6861

4971

6961

7054

5655

7161

7267

5955 Sindhi

Byelorussian 4851

I-K

5964 Singhalese

5961 Siswat

5960 Slovak

6047 Slovenian

6051 Somali

C-E

Icelandic

Cambodian 5759 Indonesian

Catalan

Chinese

Corsican

Croatian

Czech

Danish

Dutch

4947 Interlingua

7254 Interlingue

4961 Inupiak

5464 Irish

4965 Italian

5047 Japanese

6058 Javanese

5557 Norwegian 6061 Spanish

5347

O-R

Sundanese

6149 Swahili

6164 Swedish

6567

5566 Occitan

5647 Oriya

6569

6568

5669 Oromo (Afan) 6159

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 70

70 Display Settings

You can change the TV Aspect ratio and Still Mode clarity in

the Display menu.

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Press SETUP once so theTV/VCR SETUP

+100

VOL.

menu appears.

+10

SPEED C.RESET

ZOOM

– TV/VCR SETUP –

MUTE

B TIMER PROGRAMMING

SETTING CLOCK

USER'S SET UP

PLAY

STOP

LANGUAGE [ENGLISH]

ZERO RETURN

DISC

RECORD

3-4

1-2

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

When playback is stopped, press SETUP again.

The QUICK SETUP screen will appear.

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

QUICK SETUP

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

BITSTREAM

ENTER

Press s or B to select CUSTOM at the top of

the menu, then press ENTER.

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

ENTER

Press s or B to select

press ENTER.

(DISPLAY), then

DISPLAY

TV MODE

STILL MODE

4:3 LETTER BOX

AUTO

ENTER

Helpful Hints

• Selecting a different TV MODE

setting is only effective if it is

available on the DVD. Check

the DVD disc menu or case

for details.

• You also can adjust TV MODE

in the QUICK SETUP menu.

With QUICK selected, press

ENTER. TV MODE will be

selected, so press ENTER.

Press K or L to choose a

setting, then press ENTER.

Press SETUP to remove the

menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 71

Display Settings (cont’d) 71

Press

to select an item, then press

ENTER.

STANDBY-ON PICTURE SLEEP SELECT

● If you selectedTV MODE, press K or L to

select a setting, then press ENTER.

Choose 4:3 LETTER BOX if you want to see the

entire, widened picture with black bars at the top

and bottom of the screen. This looks like the

picture you see when watching movies in a theater.

This setting is possible only if the DVD was

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

recorded in the letterbox or widescreen format.

Choose 4:3 PAN & SCAN for a full height picture,

with both sides trimmed. Some companies refer to

this as reformatting the picture to fit your TV

screen and may call it the regular or normal format.

PLAY

STOP

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

DISPLAY

CLEAR SEARCH MODE REPEAT

TV MODE

4:3 LETTER BOX

4:3 PAN & SCAN

OFF

A-B

AUDIO SUBTITLE ANGLE

MODE

ENTER

TV MODE

● If you selected STILL MODE, press K or L to

select a setting, then press ENTER.

This function allows you to adjust the quality of a still

image. AUTO is the default setting.

If you select FIELD, still images will be stabilized but

coarse due to the limited amount of data.

If you select FRAME, the picture quality will be

improved due to the simultaneous output of two field

data but the image can be unstabilized.

DISPLAY

STILL MODE

AUTO

FIELD

FRAME

ENTER

STILL MODE

Press SETUP to exit the menus.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 72

72 Audio Settings

Change Audio settings based on other equipment you connected to

the TV/VCR/DVD or according to your disc sound features. These

settings only affect the Audio from the DVD player of the

TV/VCR/DVD.

STANDBY-ON PICTURE SLEEP SELECT

● Before you begin, press SELECT to put the TV/VCR/DVD in

DVD mode. The green DVD light will appear on the front of the

TV/VCR/DVD.

CH.

Press SETUP once so theTV/VCR SETUP menu

+100

VOL.

appears.

+10

SPEED C.RESET

ZOOM

– TV/VCR SETUP –

MUTE

B TIMER PROGRAMMING

SETTING CLOCK

USER'S SET UP

PLAY

STOP

LANGUAGE [ENGLISH]

ZERO RETURN

DISC

RECORD

3-6

1-2,7

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

While playback is stopped, press SETUP again.

The QUICK SETUP screen will appear.

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

QUICK SETUP

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

BITSTREAM

ENTER

Press s or B to select CUSTOM at the top of

the menu, then press ENTER.

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

ENTER

Press s or B to select

(AUDIO) , then press

ENTER.

Press K or L to select DRC, DOWN SAMPLING,

or DOLBY DIGITAL, then follow step 5 accordingly.

AUDIO

DRC

DOWN SAMPLING ON

DOLBY DIGITAL

Helpful Hints

BITSTREAM

ENTER

• Dolby Digital sound must be

available on the DVD.

DRC

• You can adjust DOLBY

DIGITAL in the QUICK

SETUP menu.With QUICK

selected, press ENTER. Press

L to select DOLBY DIGITAL.

Press ENTER to choose

BITSTREAM or PCM Press

SETUP to remove the menu.

• When you play a disc that has

●

If you selected DRC, press ENTER repeatedly to turn Dynamic Range

Control (DRC) ON or OFF. Choosing ON compresses the range of

volume by suppressing loud sounds and raising low sounds. DRC is

available only on discs recorded in the Dolby Digital format.

If you selected DOWN SAMPLING, press ENTER repeatedly to choose

ON or OFF. ON sets downsampling to 48 kHz. OFF sets downsampling

to 96 kHz. DOWN SAMPLING is available only when the unit is

connected to a Stereo using the AUDIO OUT COAXIAL jack.

If you selected DOLBY DIGITAL, press ENTER repeatedly to select

BITSTREAM or PCM. Select BITSTREAM if you used the AUDIO OUT

COAXIAL jack to connect theTV/VCR/DVD to a stereo that is Dolby

Digital compatible. Details are on page 11. Otherwise, choose PCM.

downsampling will be at

48 kHz, even if DOWN

SAMPLING is OFF.

Press SETUP to exit the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 73

Parental Password 73

The Parental feature prevents viewing of DVDs that exceed your rating limits.

This feature will not limit viewing if the DVD is not rated or coded. Check

your DVDs and settings before letting children access theTV/VCR/DVD.

Follow these steps to change your password.

STANDBY-ON PICTURE SLEEP SELECT

● Before you begin, press SELECT to put the TV/VCR/DVD

in DVD mode. The green DVD light will appear on the front

of the TV/VCR/DVD.

CH.

+100

VOL.

Press SETUP once so theTV/VCR SETUP menu appears.

+10

ZOOM

– TV/VCR SETUP –

SPEED C.RESET

MUTE

B TIMER PROGRAMMING

SETTING CLOCK

USER'S SET UP

LANGUAGE [ENGLISH]

ZERO RETURN

PLAY

STOP

DISC

RECORD

3-4

1-2

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

Press SETUP again while playback is stopped.

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

QUICK SETUP

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

BITSTREAM

ENTER

Press s or B to select CUSTOM at the top of the

menu, then press ENTER.

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

ENTER

Press s or B to select

(PARENTAL),

then press ENTER.

The first time you set a password, this menu will appear.

PASSWORD

ENTER

Press the Number buttons to enter a 4-digit

password. The password will appear on the screen.Write it

down so you don’t forget it.

Press ENTER, and proceed to step 6 on the next page.

If you have set a password before, this menu will appear.

PARENTAL

Enter current password.

ENTER

Press the Number buttons to enter your current 4-

digit password. Asterisks ( * ) will appear instead of your

password. This protects its identity.

Instructions continue on the next page.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 74

74 Parental Password (cont’d)

Instructions continued from the previous page.

STANDBY-ON PICTURE SLEEP SELECT

Press ▼ to select PASSWORD CHANGE, then

press ENTER.

CH.

+100

PARENTAL

VOL.

PARENTAL LEVEL

PASSWORD CHANGE

ALL

+10

ZOOM

SPEED C.RESET

ENTER

MUTE

PLAY

STOP

DISC

RECORD

5-6

Press the Number buttons to enter a 4-digit

password. The password numbers will appear on the

6 _{screen. Write down the password so you will not forget}

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

it. Press ENTER. The previous menu will reappear.

CLEAR SEARCH MODE REPEAT

A-B

Press SETUP to exit the menu.

AUDIO SUBTITLE ANGLE

MODE

Helpful Hints

• The default password is 4737.

If you forget your password,

press Number buttons 4, 7, 3,

7 at step 3. You will be

prompted to enter a new

4-digit password. Use the

Number buttons to enter a

new 4-digit password, then

press ENTER. PARENTAL

LEVEL will reset to ALL. Press

SETUP to remove the menu.

See pages 75-76 to reset

PARENTAL LEVEL as you

desire.

• A power failure will not erase

your password.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 75

Parental Levels 75

Follow these steps to set the rating level for your DVDs. DVDs

whose ratings exceed the level you set will not play.

● Before you begin, press SELECT to put the TV/VCR/DVD in

DVD mode. The green DVD light will appear on the front of the

TV/VCR/DVD.

STANDBY-ON PICTURE SLEEP SELECT

CH.

Press SETUP once so theTV/VCR SETUP

menu appears.

+100

VOL.

– TV/VCR SETUP –

+10

ZOOM

B TIMER PROGRAMMING

SETTING CLOCK

SPEED C.RESET

MUTE

USER'S SET UP

LANGUAGE [ENGLISH]

ZERO RETURN

3-4,

PLAY

STOP

DISC

RECORD

DISPLAY

SETUP

Press SETUP again while playback is stopped.

ENTER

TITLE

RETURN

REPEAT

1-2

CLEAR SEARCH MODE REPEAT

A-B

QUICK SETUP

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

BITSTREAM

AUDIO SUBTITLE ANGLE

MODE

ENTER

Press s or B to select CUSTOM at the top of

the menu, then press ENTER.

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

ENTER

Press s or B to select

press ENTER.

(PARENTAL), then

PARENTAL

Enter current password.

ENTER

Press the Number buttons to enter your

4-digit password. Asterisks (*) will appear instead

of your password.This protects its identity.

RATING

EXPLANATIONS

Press ▲ or ▼ to select PARENTAL LEVEL,

then press ENTER.

• ALL -The Parental feature is

inactive; all discs can play.

• 8 - Adult material

• 7 - NC-

children under

• 6 - R - Restricted; parental approval

17 - Not appropriate for

PARENTAL

PARENTAL LEVEL

ALL

PASSWORD CHANGE

ENTER

required for viewers under

18.

• 4 - PG

3 - Unsuitable for children

under

• 3 - PG - Parental Guidance

suggested.

Instructions continue on the next page.

•

1- G - General Audience;

recommended for all ages.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 76

76 Parental Levels (cont’d)

Instructions continued from the previous page.

Press ▲ or ▼ to select a level, then press

STANDBY-ON PICTURE SLEEP SELECT

CH.

ENTER. The rating levels continue on two menu

screens. Press ▲ or ▼ repeatedly to move to the

+100

next or previous screen to find the rating level you

want. After making your selection, the previous menu

will appear. The level you selected will appear beside

PARENTAL LEVEL.

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

PLAY

STOP

DISC

RECORD

PARENTAL

PARENTAL LEVEL

ALL

DISPLAY

SETUP

7 [NC-17]

6 [R]

ENTER

TITLE

RETURN

REPEAT

4 [PG13]

3 [PG]

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

Press SETUP to exit the menu.

Helpful Hints

• When you try to play a DVD

whose rating exceeds the level

you set, an on-screen message

will indicate the DVD cannot

play. Remove the DVD, then set

PARENTAL LEVEL to ALL.

Reload the DVD and begin

playback. Some DVDs may let

you enter your 4-digit

password to begin playback.

Follow the on-screen messages

as prompted.

• You cannot use the default

password (4737) to play a

DVD.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 77

Others 77

You may adjust the Angle Icon,Automatic Power Off,

Dual Playback and Slide Show settings.

STANDBY-ON PICTURE SLEEP SELECT

● Before you begin, press SELECT to put the

TV/VCR/DVD in DVD mode. The green DVD light will

appear on the front of the TV/VCR/DVD.

CH.

+100

VOL.

Press SETUP once so theTV/VCR SETUP menu

+10

ZOOM

appears.

SPEED C.RESET

MUTE

– TV/VCR SETUP –

B TIMER PROGRAMMING

SETTING CLOCK

PLAY

STOP

USER'S SET UP

LANGUAGE [ENGLISH]

ZERO RETURN

3-4

1-2

DISC

RECORD

DISPLAY

SETUP

ENTER

TITLE

RETURN

REPEAT

CLEAR SEARCH MODE REPEAT

When playback is stopped, press

A-B

SETUP again. The QUICK SETUP screen will

AUDIO SUBTITLE ANGLE

MODE

appear.

QUICK SETUP

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

BITSTREAM

ENTER

Press s or B to select CUSTOM at the top of

the menu, then press ENTER.

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

ENTER

Press s or B to select

press ENTER.

(OTHERS), then

OTHERS

ANGLE ICON

AUTO POWER OFF ON

DUAL PLAYBACK

SLIDE SHOW

OFF

5 sec

ENTER

Instructions continue on the next page.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 78

78 Others (cont’d)

Instructions continued from the previous page.

Press K or L to select an item, then press ENTER

STANDBY-ON PICTURE SLEEP SELECT

●

If you selected ANGLE ICON, press ENTER

repeatedly to select ON or OFF. The default setting is ON.

Choose ON to see the Angle icon when multiple camera

angles are available during DVD playback. Details are on page

59. Choose OFF to disable the Angle icon.

CH.

+100

VOL.

+10

SPEED C.RESET

ZOOM

MUTE

OTHERS

PLAY

STOP

ANGLE ICON

AUTO POWER OFF ON

DUAL PLAYBACK OFF

DISC

SLIDE SHOW

5sec

ENTER

RECORD

DISPLAY

SETUP

ENTER

ANGLE ICON

TITLE

RETURN

REPEAT

● If you selected AUTO POWER OFF, press ENTER

repeatedly to choose ON or OFF.The default setting is

ON. Choose ON if you want the player to turn off when

there is no activity at the player or its remote for 20

minutes.

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

OTHERS

ANGLE ICON

AUTO POWER OFF ON

DUAL PLAYBACK OFF

SLIDE SHOW

5 sec

ENTER

AUTO POWER OFF

● If you selected DUAL PLAYBACK, press ENTER

to choose ON or OFF. This feature lets you play

MP3 and JPEG files simultaneously.

OTHERS

ANGLE ICON

AUTO POWER OFF ON

DUAL PLAYBACK ON

SLIDE SHOW

5sec

ENTER

DUAL PLAYBACK

● If you selected SLIDE SHOW, press K or L to

choose 5sec or 10sec, then press ENTER. This

adjusts the playback speed of the SLIDE SHOW.The

default setting is 5 sec. Choose 5 sec to display each

image for 5 seconds. Choose 10 sec to display each image

for 10 seconds.

OTHERS

SLIDE SHOW

5 sec

10 sec

ENTER

SLIDE SHOW

Press SETUP to remove the menus.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 79

Glossary 79

AUDIO In Jacks: red and white jacks on the front of the TV/VCR/DVD

which are used to receive or record audio from another source (VCR,

Camcorder, etc.).

Automatic Channel Setup: process in which the TV/VCR/DVD memorizes

all available TV channels.Then, when you push CH. ▲/▼, you only scan

through channels you receive.

Auxiliary (AUX): The channel to which you set your TV/VCR/DVD during

dubbing or when viewing material that is playing on another device that is

connected to the TV/VCR/DVD (for example, a Camcorder orVCR or TV

channels from a Cable Box/Satellite Receiver). Press SELECT to choose AUX

at the TV/VCR/DVD.

Bands: settings that allow you to tune channels.

• Antenna –VHF (very high frequency; channels 2-13) and UHF (ultra high

frequency; channels 14-69).

• Cable – standard channels can be received without a Cable Box.

Brightness: adjusting increases or decreases the brightness of the color on

the screen.

COAXIAL Digital Audio Out jack: Sends digital audio to a stereo,

allowing you to adjust the volume at the stereo.

Color: adjusting pales or brightens the TV/VCR/DVD picture color.

Dolby Digital: A surround sound system that provides 5.1 channel sound as

used in movie theaters. Sound is heard through multiple channels, not just the

right and left as with standard stereo.

Dubbing: copying a videotape from a separateVCR or camcorder.

HQ: high quality; a feature in theVCR circuitry which provides enhanced

videotape picture detail through the TV/VCR/DVD.

OTR: One-Touch Recording; a timed recording that starts immediately and

records for 30 minutes to 8 hours, whichever you specify.

Sharpness: adjusting softens or clarifies the picture on the screen.

Tape Speeds: how fast the videotape travels during playback or recording.

The faster the tape speed, the better the recording quality will be. Faster

speeds (SP) also use more space on the tape. So, you can put more recording

on a tape if you use a slower tape speed (SLP).

• SP (standard playback) – fastest tape speed (recording time for a T120 tape

is approximately 2 hours); best picture quality.

• LP (long playback) – average tape speed; only playback in this speed is

available on this TV/VCR/DVD.

• SLP (super long playback) – slowest tape speed (recording time for a T120

tape is approximately 6 hours).

Tint: adjusting changes the tints of the picture from purple to green.

VIDEO IN Jack: yellow jack on the front of the TV/VCR/DVD which is used

to receive or record video from another source (VCR, Camcorder, etc.).

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 80

80 Helpful Hints

If you are having problems with your product, check this list of problems and possible solutions before

requesting service.You may be able to solve the problem yourself.

Location

For safe operation and satisfactory performance of your TV/VCR/DVD, remember the following:

• Shield it from direct sunlight and keep it away from sources of intense heat.

• Avoid dusty or humid places.

• Avoid places with insufficient ventilation. Do not block the ventilation openings at the top and bottom of

the TV/VCR/DVD. Do not place the TV/VCR/DVD on a carpet, as this will block the ventilation openings.

• Avoid locations subject to strong vibrations.

• Do not place the TV/VCR/DVD near strong magnetic fields.

• Do not move the TV/VCR/DVD from a cold place to a hot place, or vice versa.

Electrical Shock and Fire Hazards

• Do not handle the power cord with wet hands.

• Do not pull the power cord when disconnecting the TV/VCR/DVD from the AC (alternating current)

wall outlet. Grasp it by the plug.

• If you spill water on the TV/VCR/DVD, unplug the power cord immediately and take the TV/VCR/DVD

to an authorized service center.

• Do not put your fingers or objects into the cassette compartment or disc tray.

• Do not place anything on top of the TV/VCR/DVD.

Dew Warning (Moisture Condensation)

• Moisture may condense inside the unit when you move it from a cold place to a warm place, after

heating a cold room, or when the humidity is high.There is no warning that moisture is in your

TV/VCR/DVD. Playing a tape when moisture has accumulated could damage the tape and the

TV/VCR/DVD. If you suspect moisture inside the TV/VCR/DVD, keep the power on (but do not play a

tape) for at least 2 hours.This will allow the TV/VCR/DVD to dry.

TV/VCR/DVD will not perform a timer recording.

• Set the recording start and stop times correctly. Details are on pages 29-32.

Midnight is 12 a.m. Noon is 12 p.m.

• Make sure the TV/VCR/DVD power is off for the timer recording.

• Set the clock. Details are on pages 21-24.

• Put a videotape in the cassette compartment of the TV/VCR/DVD.The tape must have a record tab.

Details are on page 8.

• If the power fails, timer recordings will be restored when you reset the clock.Timer recordings do not

occur if set to take place during the power failure.

TV/VCR/DVD will not record on a videotape.

• Make sure the videotape has a record tab. Details are on page 8.

• Plug the power cord into an active AC outlet. Details are on page 10.

• Check your hookups. Details are on pages 9-10.

• Set up the TV channels. Details are on page 19.

• You cannot record DVDs onto a videotape using the TV/VCR/DVD.

Channel reception is poor.

• Check connections, then set up the channels again. Details are on page 19.

TV/VCR/DVD has no power.

• Connect the power plug to an AC (alternating current) outlet completely.

TV/VCR/DVD ejects the tape when you try to start a recording.

• Make sure the tape has a record tab. Details are on page 8.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 81

Helpful Hints (cont’d) 81

Disc cannot play.

• Insert a playable disc. Make sure the disc is labelled for Region 1 or ALL regions and is NTSC compatible.

Details are on page 7.

• Place the disc correctly in the disc tray. If the disc is one-sided, place the disc in the tray with the label facing

up. If the disc is two-sided, make sure the label of the side you want to play is facing up.

• Clean the disc. Make sure the disc is not scratched or warped.

• Cancel the Parental Controls, enter the password, or change the Parental level. Details are on pages 75-76.

TV/VCR/DVD does not have a picture.

• Adjust the antenna or check the CableTV or satellite signal connection. If using a Cable Box/Satellite Receiver,

set theTV/VCR/DVD to channel 3, 4 or AUX. Details are on pages 9-10.

• Adjust the picture controls. Details are on page 26.

• Select an activeTV channel. Details are on pages 19-20.

• Make sure the disc is compatible with the DVD player of theTV/VCR/DVD. Details are on page 7.

TV/VCR/DVD has poor sound or no sound.

• PressVOL. K/L to adjust the volume. Press MUTE to restore the volume.

• Check the audio settings for DVD mode. Details are on page 72.

• Check the audio settings of the disc. For example, you may have selected “soundtrack” playback or an

unavailable sound setting (such as Dolby Digital) or language. Details are on pages 61, 68-69 and 72. Try other

sound options provided in the DVD disc menu.

You cannot choose a DVD feature, such as camera angle or audio or subtitle language.

• The feature must be recorded on the DVD. Not all DVDs contain multiple angles, subtitles, etc. Refer to the

disc case to see what features are available. If the feature is not available, the “X” may appear in the top right

corner of the screen.

Videotape playback is poor or the tape is destroyed.

• Adjust the tracking. Details are on page 41.

• Use the Rental feature. Details are on page 36.

• If moisture has accumulated in the unit, keep the power on for at least 2 hours, but do not play a tape.

TV/VCR/DVD does not display closed captions forTV programs.

• Make sure closed captioning is available for the program. Refer to theTV listings in your local newspaper.

Remote control does not operate theTV/VCR/DVD.

• Aim the remote control directly at the remote sensor on the front of theTV/VCR/DVD.

Details are on page 17.

• Remove all obstacles between the remote control and theTV/VCR/DVD.

• Inspect and replace the batteries in the remote control. Details are on page 8.

Number buttons will not select channels above 69.

• Enter channel numbers as a 2-digit number. If you want to select channels 100 and above, press the +100/+10

button, then the Number buttons for the last 2 digits. Details are on page 15.

• If you are using an antenna and do not have CableTV/Satellite, only channels 2-69 will be available.

You cannot insert a tape into the cassette compartment of theTV/VCR/DVD.

• Insert the tape with the window facing up and the record tab facing you and on the left.

• Make sure a tape isn’t already inside by pressing STOP/EJECT C /A on the front of theTV/VCR/DVD.

• Gently push on the center of the tape. Never force a tape into theTV/VCR/DVD.

• If you have set a timer recording and the power is off, the unit will eject the tape if the record tab is missing.

You cannot remove the tape from theTV/VCR/DVD.

• Make sure the power plug is completely connected to an AC (alternating current) outlet.

• If a timer recording is programmed, turn on theTV/VCR/DVD power, then eject the tape. Be sure to insert a

tape and turn off theTV/VCR/DVD power for the timer recording.

• Unplug theTV/VCR/DVD power cord for 5 minutes.Then, plug in the power cord again, then press

STANDBY-ON on theTV/VCR/DVD. If the tape does not eject, press STOP/EJECT C /A on theTV/VCR/DVD

three to five times. If the tape still does not eject, an authorized servicer may need to remove the tape.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 82

82 Specifications

GeneralTV/VCR

27MDTR20

Electrical Specifications

Sound output:

Two speakers, 1W, 8 ohm

CRT:

27 inch in-line gun

110˚ deflection tube

Other Specifications

20MC4304

CRT:

Terminals

20 inch in-line gun

Antenna In:

VHF/UHF/Cable TV

90˚ deflection tube

75 ohm unbalanced (F-type)

One RCA connector

Two RCA connectors

1/8” stereo (3.5 mm)

19MDTR20

CRT:

Video In:

19 inch in-line gun

90˚ deflection tube

Audio L/R In:

Headphone:

Coaxial Digital

Audio Out:

Closed Caption system: 15.119/FCC

One pin jack,

500mVpp (75 ohm)

Video Heads:

Tape width:

Tape speeds

Rotary four-head

1/2 inch

Operating

temperature:

41ºF-104ºF (5ºC-40ºC)

33.40 mm/sec.

16.67 mm/sec.

11.12 mm/sec.

2-69

SLP

Power requirements: AC 120V, 60Hz

Tuner channels:

Cable TV:

27MDTR20:

1-125

Power consumption

(Maximum):

Dimensions:

120W

Height: 25.5” (648 mm)

Width: 26.6” (675 mm)

Depth: 19.7” (500 mm)

86 lbs. (39 kg)

General DVD

Color System:

NTSC

Weight:

20MC4304:

Power consumption

(Maximum):

90W

Dimensions:

Height: 20.2” (513 mm)

Width: 22.1” (562 mm)

Depth: 20.2” (513 mm)

50.7 lbs. (23 kg)

Weight:

19MDTR20:

Power consumption

(Maximum):

90W

Dimensions:

Height: 19.7” (500 mm)

Width: 23.8” (605 mm)

Depth: 18.7” (474 mm)

48.5 lbs. (22 kg)

Weight:

Accessories:

Remote Control with two

AA batteries

Owner’s Manual

Quick-Use Guide

Designs and specifications are subject to change without notice and without our legal obligation.

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 83

Limited Warranty 83

MAGNAVOX LIMITED WARRANTY

Ninety (90) Days Labor & One (1) Year Parts & One (1) Year Display

MAGNAVOX warrants this product against defect in material TO OBTAIN WARRANTY SERVICE IN THE U.S.A.,

or workmanship, subject to any conditions set forth as follows:

PUERTO RICO, OR U.S. VIRGIN ISLANDS…

Contact Magnavox Customer Care Center at:

1-800-705-2000

PROOF OF PURCHASE:

You must have proof of the date of purchase to receive war-

ranted repair on the product. A sales receipt or other docu-

ment showing the product and the date that you purchased the

product as well as the authorized retailer included, is consid-

ered such proof.

TO OBTAIN WARRANTY SERVICE IN CANADA…

1-800-661-6162 (French Speaking)

1-800-705-2000 (English or Spanish Speaking)

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS

WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-

SUMER. MAGNAVOX SHALL NOT BE LIABLE FOR ANY

INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR

BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON

THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED

COVERAGE:

(If this product is determined to be defective)

LABOR: For a period of ninety (90) days from the date of pur-

chase, Magnavox will repair or replace the product, at its

option, at no charge, or pay the labor charges to any Magnavox BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MER-

authorized service center. After the period of ninety (90) days,

Magnavox will no longer be responsible for charges incurred.

CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE

ON THIS PRODUCT IS LIMITED IN DURATION TO THE

DURATION OF THIS WARRANTY.

PARTS: For a period of one (1) year, Magnavox will supply, at

no charge, new or rebuilt replacement parts in exchange for

defective parts. Magnavox authorized service centers will pro-

vide removal and installation of the parts under the specified

labor warranty.

Some states do not allow the exclusions or limitation of inci-

dental or consequential damages, or allow limitations on how

long an implied warranty lasts, so the above limitations or

exclusions may not apply to you. In addition, if you enter into a

service contract agreement with the MAGNAVOX partnership

within ninety (90) days of the date of sale, the limitation on

how long an implied warranty lasts does not apply.

DISPLAY: For a period of one (1) year from the date of pur-

chase, Magnavox will supply, at no charge, a new or rebuilt

active display device in exchange for the defective display.

Magnavox authorized service centers will provide removal and

installation of the parts under the specified labor warranty.

(PTV screens carry a thirty (30) day replacement warranty.)

EXCLUDED FROM WARRANTY COVERAGE

Your warranty does not cover:

• Labor charges for installation or setup of the product, adjust-

ment of customer controls on the product, and installation

or repair of antenna systems outside of the product.

• Product repair and/or part replacement because of improper

installation, connections to improper voltage supply, abuse,

neglect, misuse, accident, unauthorized repair or other cause

not within the control of Magnavox.

•

A product that requires modification or adaptation to enable

it to operate in any country other than the country for

which it was designed, manufactured, approved and/or

authorized, or repair of products damaged by these modifica-

tions.

•

Damage occurring to product during shipping when improp-

erly packaged or cost of associated packaging.

Product lost in shipment and no signature verification of

receipt can be provided.

A product used for commercial or institutional purposes

(including but not limited to rental purposes).

• Products sold AS IS or RENEWED.

This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.

Magnavox, P.O. Box 671539, Marietta, GA. 30006-0026

(Warranty: 4835 710 28125)

Download from Www.Somanuals.com. All Manuals Search And Download.

T2132_1102_0102_EN2_0303 3/3/05 5:06 PM Page 84

84 Index

a-b repeat . . . . . . . . . . . . . . . . . .57 helpful hints . . . . . . . . . . . . . .80-81 rf coaxial cable . . . . . . . . . . . . . . . .9

angle button . . . . . . . . . . . . . .16, 59 hookups . . . . . . . . . . . . . . .9-11, 34

ant(enna) jack . . . . . . . . . . .9-10, 18

safety precautions . . . . . . . . . . . . .3

arrow buttons . . . . . . . . . . . . . . .15 language (dvd) . . . . . . . . . .61, 68-69 search mode button . .16, 54-55, 58

audio button . . . . . . . . . . . . .16, 61 language (setup menus) . . . . . . . .19 searching . . . . . . . . . . . . . . . .40, 53

audio cd . . . . . . . . . . . . . . . . . .7, 55 language settings . . . . . . . . . . .68-69 second audio program . . . . . .49, 51

audio in/out jacks . . . . . . .10, 17, 34 lp (long playback) . . . . . . . . . .27, 79 select button . . . . . . . . . . . . . . . .15

audio out coaxial jack . . . . . .11, 18

setup button . . . . . . . . . . . . . .6, 16

audio settings (dvd) . . . . . . . . . . .72 menus . . . . . . . . . . . . . . . . .6, 19, 52 sharpness . . . . . . . . . . . . . . . . . . .26

auto return . . . . . . . . . . . . . . . . .33 mode button . . . . . . . . . . .16, 64-65 sleep button . . . . . . . . . . . . . .15, 37

automatic rewind, eject . . . . . . . .41 mp3 display . . . . . . . . . . . . . . . . .63 sleep timer . . . . . . . . . . . . . . . . . .37

auxiliary mode (aux) . . .9-10, 12, 34 mp3 playback . . . . . . . . . . . . . . . .66 slow motion . . . . . . . . . . . . . .40, 60

mp3 track selection . . . . . . . . . . .66 slp (super long playback) . . . .27, 79

batteries . . . . . . . . . . . . . . . . . . . . .8 mts system . . . . . . . . . . . . . . .49-51 source button . . . . . . . . . . . . . . .17

black level . . . . . . . . . . . . . . . . . .64 mute button . . . . . . . . . . . . . . . .16 sp (standard playback) . . . . . .27, 79

brightness . . . . . . . . . . . . . . . . . .26

specifications . . . . . . . . . . . . . . . .82

number buttons . . . . . . . . . . . . . .15 speed button . . . . . . . . . . . . .16, 27

standby-on button . . . . . . . . .15, 17

c.reset button . . . . . . . . . .16, 32, 37

camera angle . . . . . . . . . . . . . . . .59 on-screen status displays . .26, 62-63 status display . . . . . . . . . . .26, 62-63

cassette compartment . . . . . . . . .17 one-touch recording . . . . . . . . . .28 stereo broadcast recording . .49-51

channel

above 100 . . . . . . . . . . . . . . . .15

open/close button A . . . . . . . . . .17 still picture . . . . . . . . . . . . . . .40, 56

stop C button . . . . . . . . . . . . . . .15

adding/deleting . . . . . . . . . . . .20 parental controls . . . . . . . . . .73-76 stop/eject C /A button . . . . .13, 17

setup . . . . . . . . . . . . . . . . . . . .19 password . . . . . . . . . . . . . . . .73-74 subtitle button . . . . . . . . . . . .16, 59

o/p buttons . . . . .12, 16-17, 41 (pause) k button . . . .15, 40, 56, 60 super high speed searching . . . . .40

chapters . . . . . . . . . . . . . . . . . . . .54 picture controls . . . . . . . . . . . . . .26

clear button . . . . . . . . . . . . . . . . .16 picture button . . . . . . . . . . . .15, 26 table of contents . . . . . . . . . . . . . .5

clock setting . . . . . . . . . . . . . .21-24 play B button . . . . . . . . . .13-15, 17 tape duplication . . . . . . . . . . . . . .34

closed captions . . . . . . . . . . . . . .42 playing discs . . . . . . . . . . . . . . . . .14 tape eject . . . . . . . . . . . . . . . .17, 81

color . . . . . . . . . . . . . . . . . . . . . .26 playing videotapes . . . . . . . . . . . .13 tape speed . . . . . . . . . . . . . . .27, 79

connections . . . . . . . . . . . . .9-11, 34 power cord . . . . . . . . . . . . . .10, 18 time search . . . . . . . . . . . . . . . . .38

contents, table of . . . . . . . . . . . . . .5 programs . . . . . . . . . . . . . . . . . . .65 time setting . . . . . . . . . . . . . . .21-24

contrast . . . . . . . . . . . . . . . . . . . .26

controls

remote . . . . . . . . . . . . . . . .15-16 ratings

tv/vcr/dvd . . . . . . . . . . . . . . . .17

timer recording

cancelling . . . . . . . . . . . . . . . . .32

checking . . . . . . . . . . . . . . . . .32

setting . . . . . . . . . . . . . . . .29-31

tv . . . . . . . . . . . . . . . . . . . .43-46 tint . . . . . . . . . . . . . . . . . . . . . . . .26

random playback . . . . . . . . . . . . .65

mpaa . . . . . . . . . . . . . . . . . . . .47

counter . . . . . . . . . . . . . . . . .26, 37 real-time tape counter . . . . . . . . .37 title button . . . . . . . . . . . . . . .15, 52

rear panel . . . . . . . . . . . . . . . . . .18 titles . . . . . . . . . . . . . . . . . . . . . . .52

daylight-savings time . . . . . . . . . . .25 record button . . . . . . . . . . . .15, 27 tracking . . . . . . . . . . . . . . . . . . . .41

disc menu button . . . . . . . . . .16, 52 recording

tracks . . . . . . . . . . . . . . . . . . . . . .55

disc tray . . . . . . . . . . . . . . . . .14, 17

display button . . . . . . .15, 26, 62-63

display settings . . . . . . . . . . . .70-71

duplication . . . . . . . . . . . . . . . . . .34 rec/otr I button . . . . . . . . . . . . .17 video in/out jacks . . . . . . .10, 17, 34

dvd light . . . . . . . . . . . . . . . . . . . .17 rec/otr light . . . . . . . . . . . . . . . . .17 virtual surround . . . . . . . . . . . . . .64

basic . . . . . . . . . . . . . . . . . . . .27

one-touch . . . . . . . . . . . . . . . .28 vcr/tv light . . . . . . . . . . . . . . . . . .17

timer . . . . . . . . . . . . . . . . .29-32 v-chip setup . . . . . . . . . . . . . .43-48

dvd video . . . . . . . . . . . . . . . . . . . .7 remote control

buttons . . . . . . . . . . . . . . .15-16

volume ▲/▼ buttons . . . . . . .16-17

ejecting a tape . . . . . . . . . . . . . . .81

enter button . . . . . . . . . . . . . . . .16 remote sensor . . . . . . . . . . . . . . .17

using . . . . . . . . . . . . . . . . . . . . .8 warranty . . . . . . . . . . . . . . . . . . .83

repeat button . . . . . . . . . . . . .15, 57 zero return . . . . . . . . . . . . . . . . .37

fast forward search . . . . . . . .40, 53 repeat a-b button . . . . . . . . . .16, 57 zoom button . . . . . . . . . . . . .16, 60

front panel . . . . . . . . . . . . . . . . . .17 repeat playback . . . . . . . . . . .35, 57

rerecording . . . . . . . . . . . . . . . . .34

glossary . . . . . . . . . . . . . . . . . . . .79 resuming playback . . . . . . . . . . . .56

return button . . . . . . . . . . . . . . . .15

headphone jack . . . . . . . . . . . . . .17 reverse searching . . . . . . . . . .40, 53

Printed In Malaysia

8239 300 39771

1EMN20260

T2132UC/1102UC_MC/0102UC_MC * * * * *

Download from Www.Somanuals.com. All Manuals Search And Download.

Philips Refrigerator 42PF5320 79 User Manual
Philips Stereo Amplifier SWV2064 User Manual
Philips Webcam 26MD357B 37 User Manual
Pioneer DVD Recorder T502202 User Manual
Pioneer TV Cables VSX 1015 S User Manual
Planon System Solutions Printer 839534009506 User Manual
Polaroid DVD Player PDV 0707N User Manual
Polk Audio Speaker System LC80fx User Manual
Polycom Conference Phone CX100 User Manual
Powermatic Lathe 4224B User Manual