CONTENTS
1. CONNECTING YOUR TV-VIDEO COMBI . . . . . . . . . . . . . . 4
Connecting the cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Connecting a decoder or other equipment . . . . . . . . . . . . 4
Continuous playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Switch off function (SLEEP TIMER) . . . . . . . . . . . . . . . . . 21
Switch on function (WAKE-UP TIMER) . . . . . . . . . . . . . . 21
2. INSTALLING YOUR TV-VIDEO COMBI . . . . . . . . . . . . . . . . 5 9. Before you call an engineer . . . . . . . . . . . . . . . . . . . . . . . 22
Initial installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Allocating a decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Manual TV channel search . . . . . . . . . . . . . . . . . . . . . . . . . 6
Satellite receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Special installation functions . . . . . . . . . . . . . . . . . . . . . . . 7
Automatic TV channel search . . . . . . . . . . . . . . . . . . . . . . 7
Channel Number Allocation . . . . . . . . . . . . . . . . . . . . . . . . 7
Delete a TV Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting the language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting the time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Technical terms used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
3. IMPORTANT NOTES FOR OPERATION . . . . . . . . . . . . . . 10
SUMMARY OF USER GUIDE . . . . . . . . . . . . . . . . . . . . . . . 10
User guide (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4. TV SET FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Selecting a TV programme . . . . . . . . . . . . . . . . . . . . . . . . 11
Automatic volume control (AVL) . . . . . . . . . . . . . . . . . . . . 11
5. PLAYBACK FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Playing a cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Playing NTSC cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Tape position indication . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Searching for tape position with the picture (picture
search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Still picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Searching for tape position without the picture (wind
and rewind) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Instant View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Automatic search for a tape position (index search) . . 12
Picture interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Cleaning the video heads . . . . . . . . . . . . . . . . . . . . . . . . . 13
6. MANUAL RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Recording without automatic switch-off . . . . . . . . . . . . 14
Recording with automatic switch-off (OTR
one-touch-recording) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Protecting your recordings . . . . . . . . . . . . . . . . . . . . . . . . 14
Auto-assembling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7. PROGRAMMED RECORDING (TIMER) . . . . . . . . . . . . . . . 16
’VPS’ (Video Programming System) and ’PDC’
(Programme Delivery Control) . . . . . . . . . . . . . . . . . . . . . 16
Programming a recording (with ’VIDEOplus’) . . . . . . . . 16
Programming a recording (without ’VIDEOPlus’) . . . . . 17
How to check or change a TIMER . . . . . . . . . . . . . . . . . . 18
8. ADDITIONAL FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 19
How to read TELETEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Parental control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Switching the On-screen display (OSD) on or off . . . . . 20
3
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS IN BRIEF
I
Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK:
forward scanning
The remote control
INDEX E Index search: In combination with
H
/
I
: to search for previous/next
TELETEXT e TELETEXT: To switch TELETEXT on or off
recording on the cassette.
STANDBY m Switch off : To switch off set, interrupt menu
function, interrupt a programmed recording
(TIMER)
RECORD/OTR n Record: To record the programme selected
STILL R Still picture: To stop the tape and show a still picture
0-9 Number buttons: 0 - 9
Coloured TELETEXT-buttons: To select TELETEXT pages directly
(red) Select page/chapter shown in red at the bottom of the screen
(green) Select page/chapter shown in green at the bottom of the screen
(yellow) Select page/chapter shown in yellow at the bottom of the screen
(blue) Select page/chapter shown in blue at the bottom of the screen
CLEAR Delete: To delete last entry or clear
programmed recording (TIMER)
TIMER k TIMER: To make a manual TIMER
programming or to alter or clear a
programmed TIMER
MENU Menu : To call up or end main menu
OK Store/Confirm: To store or confirm entry
P pAB Programme number: To select a programme
number up or down
AP q Select: One line up
P rB Select: One line down
SpDC Volume: To regulate the volume
DSr Select: Cursor left
SqC Select: Cursor right
y
Volume off: To switch the volume on or off
z
Previous programme number: To select the
previous programme number
PLAY G Playback: To play a recorded cassette
H
Rewind: During STOP and STANDBY: rewind,
during PLAYBACK: reverse scanning
STOP h Pause/Stop: To stop the tape, except while a
TIMER-recording is being made
Download from Www.Somanuals.com. All Manuals Search And Download.
Front of the set
Back of the set
EXT.1 Scart socket: To connect a satellite receiver, decoder, video recorder, etc.
Aerial input socket: To connect the aerial cable
8
Power switch : To switch off the set
Beware: If you switch the set off with the power switch
possible!
8
, TIMER-recordings are not
2
m
Standby : To switch off, interrupt a function, interrupt a programmed recording (TIMER)
P p Programme number : To select programme number up or down
Sp Volume: To regulate the volume
5
H
I
Record: To record the programme selected
Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning
Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward
scanning
G
Playback : To play a recorded cassette
?
Pause/Stop, eject cassette: To stop the tape and during STOP eject the cassette
AUDIO Audio input socket
VIDEO Video input socket : To connect a camcorder or videogames
w
Headphones socket: To connect headphones
Download from Www.Somanuals.com. All Manuals Search And Download.
Special functions on your TV-VIDEO Combi
If a television programme, which transmits TELETEXT, is stored with programme
number ’P01’, time and date will be set automatically.
When you have plugged your TV-VIDEO Combi into the mains, you will be
welcomed with an OSD picture. All you have to do is follow the instructions in
the "intelligent help line" for the next step. Enjoy the Automatic TV channel
search/save function and the automatic time adjustment.
Automatic Volume Leveller. It minimises sudden changes in TV volume when
commercial spots are transmitted.
Philips has developed a system which produces the best possible playback
quality. It reduces disturbance on old, worn video cassettes, and emphasises
the detail on very good quality cassettes.
Simple programming system for TV-VIDEO Combis. Makes programming as easy
as making a telephone call. Simply enter the programme code which you will
find in your listings magazine.
We guarantee that your TV-VIDEO Combi will switch to the new millennium with
no problems whatsoever.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1. CONNECTING YOUR TV-VIDEO COMBI
Important for the United Kingdom
Connecting the cables
This machine is fitted with an approved moulded 13 Amp plug.
To change a fuse in this type of plug, please follow these
instructions.
a Take off the fuse cover and take out the fuse.
b Put in a new fuse which should be a BS1362 5A, A.S.T.A.
or BSI approved type.
c Refit the fuse cover.
If the plug fitted is not suitable for your socket, cut it off and fit
another type.
If the plug you fit contains a fuse, it should be a 5Amp fuse. If
you fit a plug which does not need a fuse, make sure the fuse
on your fuse box is not greater than 5 Amps.
a Insert the aerial plug into the 2 socket.
DNote: Please destroy the plug you have cut off so that it
b Insert the plug of the mains cable into the wall socket.
cannot be used in a 13 Amp socket somewhere else.
c If the little red light at the front of the set is not alight,
please switch on the set. The power switch 8 is
located on the left side panel of the set.
How to connect a plug
The wires in the lead from the video recorder are coloured as
follows.
* Blue - ’neutral’ (’N’).
* Brown - ’live’ (’L’).
Connecting a decoder or other equipment
d Connect the blue wire to the terminal in the plug which is
marked with the letter ’N’ or coloured black.
You can also connect additional equipment to the EXT.1
socket. For instance, a satellite receiver, decoder or
camcorder.
e Connect the brown wire to the terminal in the plug which
is marked with the letter ’L’ or coloured red.
f Do not connect either of the wires to the terminal in the
plug which is marked with the letter ’E’, the symbol \or
coloured green or green and yellow.
Before you refit the plug cover, make sure that the grip at the
bottom of the plug is clamped over the plastic cover of the
lead, not just over the two wires.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2. INSTALLING YOUR TV-VIDEO COMBI
Initial installation
Allocating a decoder
a Open up the battery compartment of your remote control
Some TV stations will send coded TV channels, that you can
only watch when you use a decoder. You can connect such a
decoder (descrambler) to your TV-VIDEO Combi. With the
following function, the connected decoder will automatically
be activated for the TV programme you want to watch.
and place the batteries in it as shown in the picture.
a Choose the TV channel on which you wish to use the
decoder with the P pAB button on the TV-VIDEO
Combi or the number buttons 0-9 on the remote control.
b Press the MENU button on the remote control. The main
b Close the battery compartment.
menu will appear.
c If you have connected the aerial to the TV-VIDEO Combi,
c Select the line ’Installation’ with the P rB or
press the OK button.
AP q buton and confirm with the SqC button.
’Automatic TV channel search’ starts. This picture will
appear on the screen:
d Select the line ’Manual store’ with the P rB or
AP q button and confirm with the SqC button.
e Select the line ’Decoder’ with the P rB or
AP q button.
Searching...
CHANNELS FOUND:
MANUAL STORE
//////,,,,,,,,,,,,,,,,,,,,,
Channel/Frequency
FREQU.
Search
125
Fine tuning
Name edit
(,,,,,,n=,,,,,,$
xxx
Programme number
Decoder
01
OFF
Wait until all TV channels have been found. This can take
several minutes.
ã
«
Exit:
press MENU
DIf you have connected a decoder, you must install it
as described in the next section.
f Select function ’ON’ with the DSr or SqC
button. When you select ’OFF’, the function will be
switched off.
DIf you have connected a satellite receiver, please
read the section ’satellite receiver’.
g Confirm with the OK button.
h To end, press the MENU button.
Your decoder has now been allocated to this TV channel.
i Press the MENU button again.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
i If you want to change the automatic tv channel setting,
select the line ’Fine tuning’.
Manual TV channel search
With the DSr or SqC button you can vary the
automatic tv channel setting. Important: This re-tuning is
only necessary and useful in special cases, e.g.: when
there are stripes on the picture with cable-TV systems.
In certain cases the ’Automatic TV channel search’ may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
a Press the MENU button on the remote control. The main
j Press the OK button to store the TV channel.
menu will appear.
DIf you want to search for further TV channels, start
b Select the line ’Installation’ with the P rB or
again at step e.
AP q button and confirm with the SqC button.
k To end, press the MENU button.
c Select the line ’Manual store’ with the P rB or
AP q button and confirm with the SqC button.
Satellite receiver
MANUAL STORE
You can receive channels from the satellite receiver via the
scart socket EXT.1 .
To do this, select the channel number ’E1’ with the
P pAB button. You will have to select the channels to be
received by the satellite receiver on the receiver itself.
Channel/Frequency
FREQU.
Search
125
Fine tuning
Name edit
(,,,,,,n=,,,,,,$
xxx
Programme number
Decoder
01
OFF
ã
«
Exit:
press MENU
d In the line ’Channel/Frequency’, select the
display for:
’FREQU.’: frequency
’C CH’: channel
’S CH’: special channel
e If you know the frequency or channel of the desired TV
channel, you can enter the data in line ’Search’ with
the digit buttons 0-9 .
DIf you don’t know the frequency or channel of the TV
channel of your choice, press the SqC button to
start the channel search.
f In the line ’Programme number’ select the
programme number you want e.g.: ’01’, using the
DSr or SqC button.
g If you want to change the TV channel name, press the
SqC button in line ’Name edit’.
E Select the letter or number you want to change with the
DSr or SqC button. Change it with the
P rB or the AP q button. Select the next letter or
number in the same way.
h Press the OK button to store the changes you have
made.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Special installation functions
Channel Number Allocation
You can select one of the following installation functions in
order to adapt the TV-VIDEO Combi to your own specific
requirements.
a Press the MENU button. The main menu will appear.
b Select the line ’Installation’ with the buttons
P rB or AP q and confirm with the button
SqC .
Automatic TV channel search
c Select the line ’Sort channels’ with the buttons
P rB or AP q and confirm with the button
SqC .
Your TV-VIDEO Combi will search for all TV channels.
If you want to start the automatic TV channel search again,
then follow the instructions below.
SORT CHANNELS
a Press the MENU button on the remote control. The main
menu will appear.
01 xxx
02 yyy
03 zzz
04 aaa
05 bbb
06 ccc
b Select the line ’Installation’ with the P rB or
AP q button and confirm with the SqC button.
c Select the line ’Autoinstall’ with the P rB or
AP q button.
d Press the SqC button. The ’Automatic TV channel
ã
«
Exit:
press MENU
To move:
press OK
search’ starts.
d With the buttons P rB , AP q , DSr or
SqC , select the TV channel to which you want to
allocate a programme number and press the OK button.
Searching...
CHANNELS FOUND:
e With the buttons P rB , AP q , DSr or
SqC , shift the TV channel to the programme number
you wish to allocate to this TV channel and press the
OK button.
//////,,,,,,,,,,,,,,,,,,,,,
f Repeat steps dto euntil you have allocated a
programme number to all the required TV channels.
g To end, press the MENU button.
e When the TV channel search is complete,
’Installation comp.’ will appear on the
screen.
How to search for a TV channel manually, you can read in the
section ’Manual TV channel search’.
DAutomatic Channel Installation:
Some cable companies or broadcasters offer the
possibility to install TV channels automatically with ’ACI’.
Information about the installation offered and how to
select it, will appear on the screen.
This set will recognize and install TV channels with ’ACI’
automatically.
TV channels will be stored from programme number 1
onward.
If ’ACI’ cannot identify a TV channel, you can search for it
using the method as described in the section ’Manual TV
Channel Search’.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Delete a TV Channel
Setting the time and date
a Press the MENU button on the remote control. The main
a Press the MENU button. The main menu will appear.
menu will appear.
b Select the line ’Installation’ with the buttons
P rB or AP q and confirm with the button
SqC .
b Select the line ’Installation’ with the buttons
P rB or AP q and confirm with the button
SqC .
c Select the line ’Sort channels’ with the buttons
P rB or AP q and confirm with the button
SqC .
c Select the line ’Set clock’ with the P rB or
AP q button and confirm with the SqC button.
SORT CHANNELS
01 xxx
02 yyy
03 zzz
04 aaa
05 bbb
06 ccc
SET CLOCK
Time
15:36
1999
6
Year
Month
Date
Smart clock
8
ACT.
ã
«
Exit:
press MENU
ã
«
Exit:
press MENU
To move:
press OK
d Check the time in line ’Time’. If required, please change
d With the buttons P rB , AP q , DSr or
SqC , select the TV channel you want to delete and
press the CLEAR button.
the time with the 0-9 buttons on the remote control.
e Check ’Year’, ’Month’ and ’Date’ in the same way.
You can switch between entry fields with P rB or
AP q button. Confirm with the OK button.
e Repeat step d, until you have deleted all the required
TV channels.
f To end, press the MENU button.
f To end, press the MENU button.
Setting the language
You can select the language for the on-screen display (OSD).
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’Installation’ with the P rB or
AP q button and confirm with the SqC button.
c Select the line ’Language’ with the P rB or
AP q button.
d Select your language with the DSr or SqC
button.
e To end, press the MENU button.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic clock and date setting
(SMART CLOCK)
DIf a TV programme, which transmits TELETEXT, is stored
with programme number ’P01’, time and date will be set
automatically.
DThe clock will automatically be adjusted to winter time
and summer time. Confirm with the OK button.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’Installation’ with the buttons
P rB or AP q and confirm with the button
SqC .
c Select the line ’Set clock’ with the P rB or
AP q button and confirm with the SqC button.
d Select the line ’Smart clock’ with the buttons
P rB or AP q .
e Switch the function on with the buttons DSr or
SqC .
f To end, press the MENU button.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3. IMPORTANT NOTES FOR OPERATION
SUMMARY OF USER GUIDE
The OSD menu offers the following functions. More details on each can be found in the appropriate chapter.
MAIN MENU
PICTURE
Picture
Sound
Brightness
Colour
(,,,,,,,,,,,,
(,,,,,,,,,,
(,,,,,,,
Setup
Contrast
Tape
Installation
Sharpness
Store as pref.
(,,,,,,,,
ã
«
Exit:
press MENU
ã
«
Exit:
press MENU
Chapter: ’TV SET FUNCTIONS’
User guide (OSD)
The OSD (On-screen display) shows the various functions in
the form of a menu on the television screen. You can then
choose the settings you require. There is a summary of the
menus on this page. The main button functions are displayed
in a help line along the bottom of the screen.
SOUND
Volume
(,,,,,,,,,,,,
Auto volume cont.
Store as pref.
OFF
YES
E To call up the menu: With the MENU button.
E To select a line: With the DSr or qSC button.
ã
«
Exit:
press MENU
Chapter: ’TV SET FUNCTIONS’
E To enter or change your selection: With the 0-9 ,
DSr or qSC button.
E To cancel: With the MENU button.
E To save or confirm: With the OK button.
E To close the menu: With the MENU button.
SETUP
Parental control
OFF
Display
MAX
ã
«
Exit:
press MENU
Chapter: ’ADDITIONAL FUNCTIONS’
E To confirm the messages in red on the screen: Press the
OK button.
TAPE
E You can switch the machine on with the P pAB ,
z or 0-9 button or by putting in a cassette.
Tape speed
Repeat play
Jitter
Tracking
Cleaning
SP
OFF
N. ACT.
(,,,,,,=,,,,,$
N. ACT.
ã
«
Exit:
press MENU
Chapter: ’PLAYBACK FUNCTIONS’
10
Download from Www.Somanuals.com. All Manuals Search And Download.
4. TV SET FUNCTIONS
Selecting a TV programme
Volume control
Select the required TV channel (=programme number) with the You can control the volume level with the SpDC button.
P pAB button or with the digit buttons 0-9 on the remote
control.
If you want to mute the sound temporarily (e.g.: during a
telephone call), press the y button on the remote control.
When you press the y button again, the sound will return at
its original volume level.
DIf you don’t know the programme number of the required
TV channel:
a Press the P pAB button for more than 2
seconds. The TV channel list will appear on the
screen.
Sound settings
b Select the required TV channel with the
P pAB button.
a Press the MENU button. The main menu will appear.
After 1 second the TV-VIDEO Combi will switch to
the selected programme number.
b Select the line ’Sound’ with the P rB or AP q
button and confirm with the SqC button.
Picture settings
a Press the MENU button. The main menu will appear.
SOUND
b Select the line ’Picture’ with the buttons P rB or
Volume
(,,,,,,,,,,,,
AP q and confirm with the button SqC .
Auto volume cont.
Store as pref.
OFF
YES
ã
«
Exit:
press MENU
PICTURE
c Select the required line with the P rB or AP q
button and alter with the DSr or SqC button.
Brightness
Colour
(,,,,,,,,,,,,
(,,,,,,,,,,
(,,,,,,,
(,,,,,,,,
NO
Contrast
DTo store this setting as a standard setting, select the
line ’Store as pref.’ with the menu buttons
P rB or AP q . Select ’YES’ and confirm with
the OK button.
Sharpness
Store as pref.
ã
«
Exit:
press MENU
DTo call up the standard settings, switch the TV-Video
Combi off and on again.
c Select the required line with the buttons P rB or
AP q and alter with the buttons DSr or
SqC .
Automatic volume control (AVL)
E Switch on ’Auto volume cont.’ to activate the
automatic volume control. It minimises sudden changes
in TV volume when commercial spots are transmitted.
DTo store this setting as a standard setting, select the
line ’Store as pref.’ with the menu buttons
P rB or AP q . Select ’YES’ and confirm with
the OK button.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
5. PLAYBACK FUNCTIONS
Playing a cassette
Still picture
a Press the STILL R button. A still picture will appear on
a Put a cassette into the cassette slot.
the screen.
b Press the PLAY G button.
b Each time you press STILL R again, the picture will
move on one step.
c If you press the STOP h button once, the TV-VIDEO
Combi will switch to pause. To stop, press the STOP h
button again.
Searching for tape position without the
picture (wind and rewind)
d To eject the cassette, press the ? button.
a Stop the tape with the STOP h button.
DSome hired cassettes may have a poor picture or
poor sound quality. This is not a fault in your
machine. Please read ’Eliminating picture
interference’.
b Press the H (reverse) or I (forward) button.
c To stop at a certain picture, press the STOP h button.
DSome functions switch off automatically after a
while (for example, pause, still picture, picture
search). This helps to protect the cassette and
avoids wasting power.
Instant View
With this function you can switch to picture search during
wind and rewind.
Playing NTSC cassettes
a If you hold the H (rewind) or I (wind) button
during wind or rewind, you will switch to picture search.
With this set you can play cassettes that have been recorded
on another video recorder in the NTSC standard (for example,
American cassettes).
b When you release the button, the TV-VIDEO Combi will
automatically switch back to rewind or wind.
DSome special features (for example, still picture) are not
possible while you are playing an NTSC cassette.
Automatic search for a tape position (index
search)
Tape position indication
At the start of each recording, the TV-VIDEO Combi will write
an index code on the tape.
DPress the OK button to display the current tape position.
a Press the INDEX E button. Press the I button to
select the next code mark or the H button for the
previous code mark.
Searching for tape position with the picture
(picture search)
a While a cassette is playing, press the H (reverse) or
b When the TV-VIDEO Combi finds the code mark, it will
I (forward) button once or several times.
automatically switch to play.
b To stop at a certain picture, press the PLAY G button.
DDuring picture search, the picture quality may not be
so good and there will be no sound.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture interference
Cleaning the video heads
If horizontal lines appear on the screen when you play a
cassette, you should clean the video heads.
When the picture quality is poor when you play a cassette,
please follow these instructions.
Tracking during playback
a During playback, press the MENU button.
b Select the line ’Tape’ with the buttons P rB or
AP q and confirm with the SqC button.
c Select the line ’Tracking’ with the buttons P rB or
AP q .
d Hold the buttons DSr or SqC until the playback
quality is at its best.
a During playback, press the MENU button.
e Confirm with the OK button.
b Select the line ’Tape’ with the buttons P rB or
AP q and confirm with the SqC button.
f To end, press the MENU button. This setting will remain
until you remove the cassette.
c Select the line ’Cleaning’ with the buttons P rB or
AP q .
Tracking during still picture
d Press the OK button. ’CLEANING’ will appear on the
If the still picture vibrates vertically, you can improve the still
picture as follows:
screen.
e Wait a few seconds, until the message disappears and
a During still picture, press the MENU button.
then press the MENU button.
b Select the line ’Tape’ with the P rB button or
AP q and confirm with the SqC button.
c Select the line ’Jitter’ with the P rB or AP q
button.
d Hold the DSr or SqC button until the picture
quality is at its best.
e Confirm with the OK button.
f To end, press the MENU button.
DPlease note, however, that interference may still
occur with poor quality cassettes.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
6. MANUAL RECORDING
Use ’Manual Recording’ to make a spontaneous recording (for
example, a programme currently being shown).
Recording with automatic switch-off (OTR
one-touch-recording)
E If you want to start and stop a recording manually, read
the section: ’Recording without automatic switch-off’.
a Put a cassette in the machine.
E If you want to start a recording manually but have it
stopped automatically, read the section: ’Recording with
automatic switch-off’.
b Use the P pAB button to select the programme
number you want to record.
c Press the RECORD/OTR n button on the remote control.
When you are recording, the red recording light at the
front of the TV-VIDEO Combi will be alight.
Recording without automatic switch-off
a Insert a cassette.
d Press the RECORD/OTR n button again and again until the
display on the TV-VIDEO Combi shows the desired end
time or length of the recording.
b Use the P pAB button to select the programme
number you want to record, for example, ’P01’.
DTo cancel this information, press the CLEAR button.
e Confirm with the OK button.
DProgramme number ’E1’ is provided for recording
from external sources (via the EXT.1 scart socket).
c To start recording, press the RECORD/OTR n button on the
remote control or 5 on the TV-VIDEO Combi.
When you are recording, the red recording light at the
front of the TV-VIDEO Combi will be alight.
f To end, press the MENU button.
Protecting your recordings
d Stop recording with the STOP h button.
So that you don’t accidentally delete an important recording,
remove the special tab on the narrow side of the cassette with
a screwdriver or slide the special tab to the left. Later, if you
no longer want to protect your recording, you can seal the gap
again with sticky tape or slide the special tab to the right.
DDuring a recording you can only watch the current
programme.
DTo switch off the screen, press the STANDBY m
button.
Auto-assembling
You can use the auto-assembling function to join individual
recordings without any major picture disturbance between
them.
a While the cassette is playing, search for the correct
position on the tape.
b Stop the cassette by pressing the STOP h button.
’Pause’ will appear on the TV screen.
c Now start recording as usual by pressing the
RECORD/OTR n button on the remote control.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the recording speed (SP or LP)
You can reduce the recording speed by half. This makes it
possible to record, for example, eight-hours instead of
four-hours on an ’E240’ (four-hour) cassette.
a Press the MENU button. The main menu will appear.
b Select the line ’Tape’ with the P rB or AP q
button, and confirm with the SqC button.
c Select the line ’Tape speed’ with the P rB or
AP q button, and confirm with the SqC button.
d Select the required recording speed with the DSr or
SqC button.
D’LP’: Long Play = half recording speed (double
recording time).
’SP’: Standard Play = normal recording speed.
DThe picture quality will be adversely affected when
recording at half recording speed (’LP’).
DFor playback, the correct recording speed will
automatically be selected.
e Confirm with the OK button.
f To end, press the MENU button.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
7. PROGRAMMED RECORDING (TIMER)
Use programmed recording to automatically start and stop a
recording at a later date.
Programming a recording (with ’VIDEOplus’)
All the information required for a programming is contained in
the PlusCode-programming number.
To make a programmed recording, your TV-VIDEO Combi
needs to know:
* the date you want to make the recording;
* the programme number for the TV channel you want to
record;
* the start and stop time of the recording;
* whether you want to use VPS or PDC;
* the recording speed (SP/LP).
a Press the TIMER k button on the remote control.
b Select the line ’Videoplus’ with the buttons
The TV-VIDEO Combi stores all the information in a TIMER
block. You can programme up to 6 TIMER blocks a month in
advance.
P rB or AP q and confirm with the SqC button.
c Enter the entire PlusCode-programming number (up to 9
digits) printed in your TV guide next to the start time of a
TV programme.
’VPS’ (Video Programming System) and
’PDC’ (Programme Delivery Control)
For example, 5-234-89 or 5 234 89
Enter 523489 for the PlusCode-programming number.
If you make a mistake, you can clear your instructions
with the CLEAR button.
With ’VPS and PDC’, the TV station controls the start time and
the length of the recording. This means that the TV-VIDEO
Combi switches itself on and off at the right time even if a TV
programme you want to record begins earlier or finishes later
than expected.
Usually the start time is the same as the VPS or PDC time. But
if your TV guide gives a VPS or PDC time which is different to
the programme’s start time (for example, 20.15 and VPS 20.14),
you must enter ’20.14’ as the start time.
VIDEOPLUS
CODE
REPEAT
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
If you want to programme a time that is different from the VPS
or PDC time, you must switch off VPS or PDC.
1
2
3
4
5
6(
(
(
ONCE
0-9
Store:
press OK
d In line ’REPEAT’ select daily or weekly programming
with the P rB or AP q button.
’Mo-Fr’: If you want to make a recording every day
from Monday to Friday.
’Mo-Su’: If you want to make a recording every day
from Monday to Sunday.
’WEEKLY’: If you want to make a recording every week
on the same day of the week.
’ONCE’: If you want to make only one recording.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
e Confirm with the OK button. Your programming details
DA programmed recording can only start, when the
will then appear on the TV screen.
machine is switched to standby.
g If you confirmed with the OK button, exit the menu with
the TIMER k button.
TIMER PROGRAMMING
VPS
DATEPROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Programming a recording
(without ’VIDEOPlus’)
15 xxx
15:36 15:50
-
*
ONCE
a Press the TIMER k button on the remote control.
ã
«
Exit:
press TIMER
Start:
press è
b Select the line ’Timer programming’ with the
buttons P rB or AP q and confirm with the
SqC button.
DIf VIDEOPlus+ does not recognise the TV channel,
’P??’ will appear on the TV screen. Instead of
’P??’, you can select the programme number you
want with the number buttons 0-9 .
TIMER PROGRAMMING
DIf ’Code error’ appears on the TV screen, this
means you entered an incorrect PlusCode number
or the incorrect date. Correct your instructions or
end with the TIMER k button.
VPS
DATEPROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-- --
--:-- --:--
-
-
-----
DIf ’Daily error’ appears on the TV screen, the
date was incorrectly entered.
ã
«
Exit:
press TIMER
Start:
press è
DUnder ’VPS/PDC’, use the P rB or AP q
button to switch ’VPS or PDC’ on or off.
DUnder ’LP’, use the P rB or AP q button to
c Select a free TIMER block with the P pAB button.
select the recording speed ’SP’ or ’LP’.
Press the OK button.
DThe TIMER lamp on the front of the set will light up
when one or more of the TIMER blocks are
occupied.
TIMER PROGRAMMING
VPS
DWhen you are recording, the red recording light at
DATEPROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
the front of the TV-VIDEO Combi will be alight.
15 xxx
15:36 15:50
-
*
ONCE
DIf the end of the cassette is reached during a
recording, the TV-VIDEO Combi automatically ejects
the cassette.
DIf you forget to load a cassette, ’No cassette’
ã
«
Exit:
press TIMER
Start:
press è
will appear.
DIf you inserted a cassette with erase protection
when you want to start a recording, the cassette will
be ejected.
d Select the entry field with the DSr or SqC
button.
f Confirm with the OK button.
e Enter information with the buttons P rB or AP q or
E ’Press STANDBY to start recording’
will appear on the screen. If you have programmed a
recording that should start within the next few minutes,
confirm with the STANDBY m button. If you have
programmed a recording that will start at some later point
in time, confirm with the OK button.
with the digit buttons 0-9 .
17
Download from Www.Somanuals.com. All Manuals Search And Download.
DUnder ’REP.’, use the P rB or AP q button to
select daily or weekly programming.
How to check or change a TIMER
’Mo-Fr’: If you want to make a recording every day
from Monday to Friday.
a Press the TIMER k button on the remote control.
’Mo-Su’: If you want to make a recording every day
from Monday to Sunday.
’WEEKL’: If you want to make a recording every
week on the same day of the week.
b Select the line ’Timer programming’ with the
buttons P rB or AP q and confirm with the
SqC button.
’ONCE’: If you want to make only one recording.
c Select the TIMER you want to check or change with the
P rB or AP q button and confirm with the OK
button.
DUnder ’LP’, use the P rB or AP q button to
select the recording speed ’SP’ or ’LP’.
DUnder ’VPS/PDC’, use the P rB or AP q
d Select the entry field with the DSr or SqC
button to switch ’VPS or PDC’ on or off.
button.
e Change any information with the P rB or AP q
f Confirm with the OK button when the information is
button or with the 0-9 buttons.
correct.
DUnder ’LP’, use the P rB or AP q button to
E ’Press STANDBY to start recording’
will appear on the screen. If you have programmed a
recording that should start within the next few minutes,
confirm with the STANDBY m button. If you have
programmed a recording that will start at some later point
in time, confirm with the OK button.
select the recording speed ’SP’ or ’LP’.
f Confirm with the OK button when the information is
correct.
g Confirm the message on the screen with the OK button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
DA programmed recording can only start, when the
machine is switched to standby.
DThe programming information has been stored in a
DIf you entered the wrong date for a daily/weekly
recording, your TV-VIDEO Combi will correct it
automatically.
TIMER block.
h To end, press the TIMER k button.
g If you confirmed with the OK button, exit the menu with
i Make sure that the cassette you have put in can be
the TIMER k button.
recorded on.
DThe programming information has been stored in a
TIMER block.
How to clear a TIMER
h Make sure that the cassette you have put in can be
recorded on.
a Press the TIMER k button on the remote control.
b Select the line ’Timer programming’ with the
buttons P rB or AP q and confirm with the
SqC button.
c Select the TIMER you want to clear with the buttons
P rB or AP q .
d Press the CLEAR button.
e Switch off with the TIMER k button.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
8. ADDITIONAL FUNCTIONS
How to read TELETEXT
Parental control
E Press the TELETEXT e button to switch the TXT decoder
on and off. The TV-VIDEO Combi is now receiving the TXT
of the TV channel currently selected.
This function will prevent unauthorised use of your TV-VIDEO
Combi. All button-functions will be locked.
DYou can make programmed recordings while the parental
E To store the current page, press the OK button.
The next time you call up TELETEXT, you will
automatically turn to this page.
control is on.
a Press the MENU button. The main menu will appear.
E If you want to select an other page, type in the number of
the page with the digit buttons 0-9 . With the colour
buttons on your remote control you can directly select
the page numbers/chapters shown at the bottom of the
TV screen.
b Select the line ’Setup’ with the P rB or AP q
button and confirm with the SqC button.
Extra TELETEXT functions
To use the extra TELETEXT functions, press the MENU button,
when you are in TELETEXT.
SETUP
E To enlarge the print, select the symbol ’g’ and confirm
Parental control
OFF
with the OK button.
Display
MAX
E To switch off the TELETEXT decoder temporarily, select
ã
«
Exit:
press MENU
the symbol ’d’ and confirm with the OK button.
E To call up a TELETEXT sub-page:
c In the line ’Parental control’ select ’ON’ with
a Select the symbol ’}’ and confirm with the OK
the DSr or SqC button.
button.
b Enter the page number of the sub-page with the
d Confirm with the OK button.
0-9 -buttons (for example: 0123).
E To call up concealed information, select the symbol ’b’
e To end, press the MENU button.
and confirm with the OK button.
Keep the remote control in a safe place.
E To stop the pages from being turned over, select the
symbol ’f’ and confirm with the OK button.
f If you want to switch off the parental control, select
’OFF’ in line ’Parental control’.
E To show TELETEXT transparently, select the symbol ’-’
and confirm with the OK button.
DIf a button is pressed with activated parental
control, ’Parental Control active’ will
appear in the display.
DIf you want to eject a cassette with activated
parental control, press the STOP h button several
seconds.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the On-screen display (OSD) on
or off
Continuous playback
You can automatically play a cassette again and again. When
the end of the tape or the recording has been reached, it will
rewind and start again.
You can switch the On Screen Display of the current operating
information on or off.
a Press the MENU button. The main menu will appear.
a Press the MENU button. The main menu will appear.
b Select the line ’Tape’ with the buttons P rB or
b Select the line ’Setup’ with the buttons P rB or
AP q . Confirm with the menu buton SqC .
AP q and confirm with the SqC button.
TAPE
Tape speed
Repeat play
Jitter
Tracking
Cleaning
SP
OFF
SETUP
N. ACT.
(,,,,,,=,,,,,$
N. ACT.
Parental control
OFF
Display
MAX
ã
«
Exit:
press MENU
ã
«
Exit:
press MENU
c Select the line ’Repeat play’ with the buttons
c Select the line ’Display’ with the buttons P rB or
P rB or AP q .
AP q .
d Select ’ON’ with the buttons DSr or SqC . If you
d Select one of the options indicated with the buttons
SqC or DSr .
select ’OFF’, the function will be switched off.
’MAX’: OSD appears for a few seconds each time an
operating mode is selected and then disappears.
’MIN’: OSD is minimised.
e Confirm with the OK button.
’PROGR.’: the programme number is constantly
indicated.
f Press the MENU button.
’COUNTER’: the counter is constantly indicated.
e Confirm with the OK button.
f To end, press the MENU button.
DYou can use the OK button to show the current
operating mode on your TV screen.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch off function (SLEEP TIMER)
Switch on function (WAKE-UP TIMER)
You can programme your set to switch off after a
predetermined period.
You can programme your set to switch on at a predetermined
time.
a Press the TIMER k button on the remote control.
a Press the TIMER k button on the remote control.
b Select line ’Sleep timer’ with the P rB or
b Select line ’Wake-up timer’ with the P rB or
AP q button and confirm with the SqC button.
AP q button and confirm with the SqC button.
c Determine the time left until switch off in 15 minutes
c Select the entry field with the DSr or SqC
intervals using the P rB or AP q button.
button.
DYou can switch the function off with the CLEAR
d Enter the information with the P rB or AP q button
button on the remote control.
or with the number buttons 0-9 .
d Confirm with the OK button.
e In the line ’ON’, switch the function on or off.
f Confirm with the OK button.
e To end, press the TIMER k button.
g To end, press the TIMER k button.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Before you call an engineer
If, contrary to expectation, you have any problems using this
TV-VIDEO Combi, it may be caused by one of the reasons
mentioned below. You can also call the customer service
centrein your country.
You will find the phone number in the enclosed guarantee
leaflet.
’Smart Clock’ setting does not work:
•
You have stored a TV channel on programme number ’P01’ that
does not transmit TELETEXT: On ’P01’ store a TV channel that
transmits TELETEXT.
•
•
Poor TELETEXT reception: On ’P01’ store a TV channel with
good TELETEXT reception.
You have not activated the Smart Clock function: Switch the
function ’ON’.
Your TV-VIDEO Combi does not respond to any button being
pressed:
You hear a very short and soft noise coming from your
TV-VIDEO Combi at 3:00 at night:
•
•
There is no power supply: check the power supply
A programmed recording is currently being made: cancel the
programmed recording with the STANDBY m button.
Parental control is on: switch the parental control off.
Continuous playback is on: switch the continuous playback off.
There is a technical problem: switch off with the 8 power
switch for 30 seconds, then switch it on again.
•
’Smart Clock’ is checking the time: Swith off the Smart Clock
function.
•
•
•
TELETEXT does not start at page 100:
•
You have stored a different preferred page: Store page 100 as
preferred page.
Cassette is jammed in the TV-VIDEO Combi:
•
Don’t use force. Switch off with the 8 power switch for a
Technical terms used
moment.
Remote control does not work:
Current tape position : The part of the tape currently being
played.
•
Remote control not pointed toward the TV-VIDEO Combi: point it
at the TV-VIDEO Combi.
External source : A device connected via a socket (for
example, scart socket) which is transmitting audio/video
signals to the TV-VIDEO Combi.
Index marking : A marking which is automatically made on the
tape at the beginning of every recording. This marking
(recording ID) can be searched for with the Index search
function.
Scart cable : Also known as a Euro-AV cable. This standard
cable is an easy method of connecting various TV, audio and
video devices, such as a HIFI and Dolby Surround set, video
recorder, DVD player, SAT receiver, decoder, computer and
similar devices. Other signals in addition to audio and video
signals can be transmitted on it.
•
Batteries have run out: change the batteries.
No picture when you play a cassette:
•
There is no recording on the cassette: change the cassette.
Poor picture quality when you play a cassette:
•
•
The cassette badly worn or of poor quality: use new cassette.
Tracking is not properly adjusted or the video heads are dirty:
turn to chapter ’PLAYBACK’ and read the section ’Eliminating
picture interference’.
You are playing a cassette with a LongPlay recording on it:
Excellent picture quality is only guarateed with recordings made
in StandardPlay recording speed.
•
TV system : There are various systems for transmitting
television signals, for example, PAL, SECAM, PAL BG, SECAM
DK, SECAM L/L, NTSC etc. The system used by your television
depends on which country you are in.
TXT : Also known as Teletext, Fasttext, Videotext, FLOF etc.
OTR : One touch recording. This function enables you to select
the switch-off time in intervals of 30 minutes.
The TV-VIDEO Combi will not record:
•
The TV channel you want to record is not stored or you selected
the wrong programme number: check TV channels stored.
You have loaded a cassette which cannot be recorded on: undo
the erase protection on the cassette.
•
Programmed recording does not work:
•
•
You have not set the TIMER properly: check the TIMER blocks.
You have programmed the wrong time or date: check time and
date.
•
•
You have put in a cassette that cannot be recorded on: undo the
erase protection on the cassette.
’PDC’ or ’VPS’ switched on but ’PDC/VPS time’ wrong: enter PDC
or VPS time exactly to the minute. Have the aerial checked.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
|