TVCR
14PV111/07 14PV112/07
14PV415/07 14PV203/07 14PV460/07
Make sure that children do not place any
foreign objects within the openings or venti-
lation slots.
These operating instructions have been
printed on non-polluting paper.
Deposit old batteries at the appropriate col-
lection points.
Please make use of the facilities available
in your country for disposing of the packag-
ing of the TV-Video combi in a way that
helps to protect the environment.
Thank you for buying a Philips TV-Video combi.
This TV-Video combi is one of the most sophisti-
cated and easy-to-use TV-Video combi on the
market. Please take the time to read this operat-
ing manual before using your TV-Video combi. It
contains important information and notes regard-
ing operation. The TV-Video combi should not
be turned on immediately after transporta-
tion from a cold to a hot area or vice versa, or
in conditions of extreme humidity. Wait at least
three hours after transporting the device. The
TV-Video combi needs this time in order to
become acclimatised to its new environment
(temperature, air humidity, etc.).
!
This electronic device contains many materials
that can be recycled. Please enquire about the
possibilities for recycling your old device.
So that you can identify your machine for service
questions or in the event of theft, enter the serial num-
ber here. The serial number (PROD.NO.) is printed on
the type plate fixed at the back of the device.
PAL
This TV-Video combi is used for the recording and
playback of VHS videocassettes. Cassettes with
the VHS-C label (VHS cassettes for camcorders)
may only be used with a suitable adapter.
MODEL NO.
PROD. NO.
:
14PV111/07, 14PV112/07, 14PV415/07
We hope you enjoy your new TV-Video combi.
14PV203/07, 14PV460/07
...........................
Important notes regarding operation
This product complies with the requirements of
Directive 73/23/EEC +89/336/EEC +93/68 EEC.
Danger: High voltage!
There is a risk of an electrical shock!
"
Interference
The TV-Video combi does not contain any
"
components that can be repaired by the
customer. Please leave all maintenance
work for qualified personnel.
The Department of Trade and industry operates a
Radio lnvestigation Service to help TV licence hold-
ers improve reception of BBC and ITC programmes
where these are being spoilt by interference.
If your dealer cannot help, ask at a Main Post
Office for the booklet 'How to lmprove Television
and Radio Reception'.
As soon as the TV-Video combi is connect-
"
ed to the power supply, some components
are in constant operation. To-switch off the
TV-Video combi completely you must dis-
connect it from the mains or switch it off
with the main switch.
Specifications
Voltage: 230-240V/50Hz
Power consumption : 52W
Power consumption (Standby): less than 4W
Rewind time: less than 240 seconds (cassette E-180)
Weight without packing in kg: 11.5
Dimensions in cm (HxWxD):40.0x37.3x38.0
Number of video heads : 2
Recording/playback time: 3 hours (SP)
(cassette E-180)
6 hours (LP) (cassette E-180)
Make sure that air can circulate freely
!
through the ventilation slots on the TV-
Video combi. Do not place the device on an
unsteady base.
Make sure that no objects or liquids enter
!
the TV-Video combi. Do not place vases or
the like on the TV-Video combi. If liquid is
spilt into it, immediately disconnect the TV-
Video combi from the power supply and call
After-sales Service for advice.
Supplied accessories
Do not place any combustible objects on
the device (candles, etc.).
• Operating instructions
• Remote control and batteries
!
Download from Www.Somanuals.com. All Manuals Search And Download.
Front of the device
STANDBY
Power switch: To switch the TV-Video Combi off.
Caution: If you switch off using the power switch, TIMER-recordings are impossible!
y
5
P-
Standby/on: To switch TVCR On or Off or to interrupt a menu function.
+
–
Volume: In connection with the button
,
to adjust the volume.
Programme number minus: previous programme number
Programme number plus: next programme number
P+
I
Record: To record the programme currently selected.
B
Playback: To play a recorded cassette.
C
/A
Pause/Stop, eject cassette: To stop the tape; If this key is depressed while in STOP, the cassette is then
ejected from the machine.
When tape playback is stopped, press to fast forward the tape at high speed.
1
0
When tape playback is stopped, press to rewind the tape at high speed.
Sockets on the front:
White socket / AUDIO input socket: To connect a camcorder or video games (audio).
VIDEO
Yellow socket /
Small socket /
input socket: To connect a camcorder or video games (video).
socket for headphones: To connect headphones.
Back of the set
Aerial input socket: To connect the aerial cable.
EXT1/AV1 Scart socket :To connect a satellite receiver, decoder, video recorder, etc.
The control lights at the front of machine
STANDBY
Standby LED: lights up when the TV-Video Combi has been switched On by means of the main
switch.
RECORD
Recording LED: lights up during recording.
Fast blink: RECORDING PAUSE; TIMER RECORDING NOT STAND-BY.
Slow blink: TIMER RECORDING is stored in a timer block.
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Connecting the TV-Video Combi
1.Take the remote control and the enclosed
Important for the United Kingdom
batteries (2 batteries).
This apparatus is fitted with an approved 5 Amp plug.
To change a fuse in this type of plug proceed as fol-
lows:
1.Remove fuse cover and fuse.
2.Fix new fuse which should be a BS1362
5A,ASTA or BSI approved type.
2.Open the remote control's battery compart-
ment and place the batteries in it as shown in
the picture and close the battery compart-
ment.
The remote control is now ready to use.
Its range is approximately 7 metres.
3.Refit the fuse cover.
Connecting the cable
If the fitted plug is not suitable for your socket
outlets, it should be cut off and an appropriate
plug fitted in its place.
If the mains plug contains a fuse, this should
have a value of 5A. If a plug without a fuse is
used, the fuse at the distribution board should
not be greater than 5A.
The severed plug must be destroyed to avoid a
possible shock hazard should it be inserted into a
13A socket elsewhere.
How to connect a plug:
1.Insert the aerial cable plug into the AERIAL
at the back of the TV-Video Combi.
2.Connect the mains cable to the wall socket.
The wires in the mains lead are coloured in
accordance with the following code:
BLUE- 'NEUTRAL' ('N')
3.If the little red standby light (STANDBY ) at
the front panel of the set is not lit, please
switch on the set using the main power
BROWN- 'LIVE' ('L')
4.The BLUE wire must be connected to the ter-
minal which is marked with the letter 'N' or
coloured BLACK.
5.The BROWN wire must be connected to the
terminal which is marked with the letter 'L' or
coloured RED.
6.Do not connect either wires to the earth ter-
minal in the plug which is marked with the
letter 'E' or by the safety earth symbol
coloured green or green-and-yellow.
switch. The power switch
left side panel of the set.
is located on the
This text will appear on the TV screen.
PLEASE CONNECT AERIAL OR
CABLE TO THE TVCR
THEN...
or
KEY
PUSH P+
OR...
Before replacing the plug cover, make certain
that the cord grip is clamped over the sheath of
the lead-not imply over the two wires.
FOR PLAY ONLY PUSH PLAY
You can find more details in chapter 'Preparation
for use'.
Connecting additional devices
Preparing the remote control for
operation
You can connect additional devices such as
decoders, satellite receivers, camcorders, etc. to
the EXT1 socket..
The remote control and its batteries are packed sepa-
rately in the original TV-Video Combi packaging. You
must install the batteries in the remote control before
use.
The respective scart socket is usually marked
'
AV
'
or
'TV' on the decoder or satellite receiver.
EN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Important notes for operation
Switching on
You can switch TV-Video Combi on with
Navigation in the screen menu
You can check/change many functions and set-
tings of your TV-Video Combi via on-screen
menu. The individual functions are selected, via
the remote control as follows:
STANDBY/ON y
.
Power outage/no power
Channel information remains saved for up to 10
year, the time and timer information is saved for
up to 1 minute.
MENU
Call up the menu: with
.
K B L C
To select: with
.
To enter or change your selection: with the
K B L C
number buttons 0..9 or with
.
B 1
To save or confirm: with
.
To cancel: with CLEAR .
STATUS/EXIT
To end: with
.
SELECT K L CHOOSE B
→TIMER
PICTURE CONTROL
RECORD SET UP
VCR SET UP
TUNER SET UP
GENERAL SET UP
END=EXIT
3. Installing your TV-Video Combi
<14PV203/07, 14PV460/07>
Preparation for use
3.'TIME' and 'DATE' will appear on the TV
screen.
1.After you have connected the aerial or cable,
confirm the picture on the TV screen with
B 1
TIME --:--
.
Connecting additional devices
DATE --/--/--
After you have connected additional devices
(satellite receiver, etc.) through the aerial cable,
switch them on. The automatic channel search
will recognise them and save them.
SMART CLOCK [ON]
END=EXIT
2.The automatic TV channel search starts.
This picture will appear on the screen.
4.Check 'TIME'. If required, please change the
0..9
time with the number buttons
.
5.Check if the displayed settings for 'DAY',
'MONTH' and 'YEAR' are correct.
6.When all information is correct, save by
STATUS/EXIT
PLEASE WAIT
pressing
.
START
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
FINISH
The preparation for use is now complete.
Satellite receiver
If you are connecting a satellite receiver, please
read the section 'Using the satellite receiver'.
Decoder
If you are connecting a decoder, you must
install it as described in the next section.
When automatic TV channel search is com-
plete,'AUTO TUNING COMPLETE' will
appear on the TV screen.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Decoder allocation
Manual TV channel search
Some TV channels transmit encoded TV signals
which can only be viewed with a commercially
purchased or rented decoder without distur-
bances. You can connect such a decoder to this
TV-Video Combi. The following function will auto-
matically activate the connected decoder for the
desired TV channel.
In some cases it could occur that all of the TV
channels were not found and saved during the
Preparation for use. In this case, the missing or
coded TV channels must be searched for and
stored manually.
MENU
1.Press
. The main menu will appear.
K B L C
2.Select 'TUNER SET UP' with
and
0..9
to select the TV chan-
P+
1.Use
P- or
,
B 1
confirm with
.
nel which you would like to allocate the
K B L C
3.Select 'MANUAL TUNING' with
decoder to.
B 1
.
K B L C
and confirm with
MENU
2.Press
3.Use
. The main menu will appear.
to select 'TUNER SET UP'.
4.Select 'PROG.' with
. Then press
K B L C
B 1
.
B 1
Then press
4.Use
.
MANUAL TUNING
K B L C
to select 'MANUAL TUNING'.
→PROG.
CHANNEL
DECODER
SKIP
P55
055
[OFF]
[OFF]
B 1
Then press
5.Use
.
K B L C
to select 'DECODER'.
MANUAL TUNING
SELECT K L CHOOSE B
END=EXIT
PROG.
CHANNEL
→DECODER
SKIP
P55
055
[OFF]
[OFF]
K B L C
0..9
5.With
, select the desired
or
programme number that you want to use for
SELECT K L CHOOSE B
END=EXIT
B 1
the TV channel, e.g. 'P01'. Then press
.
What is a special channel?
TV channels are transmitted in certain pre-defined
frequency ranges. These ranges are divided into
channels.
B 1
6.Use
to select 'ON'
(Decoder switched on).
A specific frequency/channel is assigned to each
TV station.
Certain frequency ranges are specified as special
channels (hyperband channels).
How can I switch off the decoder?
B 1
Use
off).
to select 'OFF' (Decoder switched
K B L C
6.Select 'CHANNEL' with
, and con-
STATUS/EXIT
7.To end, press
.
B 1
firm with
nel with
. Then enter the desired chan-
The decoder has now been allocated to this TV
channel.
0..9
.
When a channel is found,it will stop searching. If
B 1
this is the channel you want, press
. If you
'
'
set SKIP on for a channel, this channel will be
ignored when going through the channels with
P+
P–
or
.
To search for other TV channels, begin again at
step 4.
I don't know the channels for my TV stations In
K B L C
this case, press
in 'CHANNEL' to start
the automatic channel search. A changing channel
number will appear on the TV screen. Continue the
automatic search until you have found the desired
TV channel.
STATUS/EXIT
7.To end, press
.
EN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Sorting and clearing TV channels
manually
Using the satellite receiver
You can receive channels from the satellite
AV1/EXT1
receiver via the scart socket
.
You can use this function to individually sort the
TV channels already saved or to delete unwant-
ed TV channels or those with poor reception.
To do this, select the channel number 'AV1' by
0..9
pressing 0,0,1, with the keys
on the remote
control.You will have to select the channel you
want to receive on the satellite receiver itself.
The clock resets automatically
If you save a TV channel that transmits TXT/PDC
on programme number ‘P01’, date and time will
and constantly be updated. As a result, time
changes, i.e. daylight savings time, will be set
automatically.
Automatic Tuning
During installation, all available TV channels are
searched for and saved. If you want to replace
the TV channels already saved with the new
ones, follow the instructions below.
MENU
MENU
1.Press
. The main menu will appear.
K B L C
2.Select 'TUNER SET UP' with
and
1.Press
. The main menu will appear.
B 1
confirm with
.
K B L C
2.Select 'TUNER SET UP' with
and
K B L C
3.Select 'MOVE' with
, and confirm
B 1
confirm with
3.Select 'AUTO TUNING' with
confirm with
.
B 1
with
.
K B L C
and
B 1
.
MOVE
→P01: 02
P02: 03
P03: 05
P04: 10
P05: 74
P06: 90
P07: 99
P08: 121
P09: 124
P10: 130
PLEASE WAIT
SELECT K L CHOOSE B
END=EXIT
START
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
FINISH
K B L C
4.With
, select the saved TV chan-
nel that you want to move.
4.The automatic TV channel search starts. This
allows the TV-Video Combi to save all avail-
able TV channels. This procedure may take
several minutes.
B 1
5.Confirm with
.
K B L C
6.Move the selected channel with
the programme number you want to assign.
to
5.When the TV channel search is complete,
'AUTO TUNING COMPLETED' will briefly
appear on the TV screen.
B 1
Then press
. The programme number
will change to '_ _'.
B 1
7.Confirm with
.
8.To assign other TV channels to a programme
number, repeat steps 4 to 7.
9.Confirm the assignment of the TV channel
with
.
MOVE menu
STATUS/EXIT
10.To exit the
, press
MOVE menu
.
The following sorting of TV channels is recom-
mended:
P01: BBC1
P02: BBC2
P03: ITV
P04: CH4
P05: CH5
P06: SKY
and then all other TV channels.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4.Check the time in 'TIME'. If required, please
Setting the clock
0..9
change the time with
.
If the display shows an incorrect time or ' --:-- '
the time and date must be reset manually.
MENU
5.Check 'DAY', 'MONTH' and 'YEAR' in the
same way.
(Choose 'SMART CLOCK' ON or OFF with
1.Press
. The main menu will appear.
B 1
K B L C
. [14PV203/07, 14PV460/07] )
2.Select 'GENERAL SET UP' with
B 1
and confirm with
3.Select 'CLOCK' with
B 1
.
K B L C
<14PV203/07, 14PV460/07>
Time/date is displayed incorrectly despite
manual setting
and confirm
with
.
* With Smart Clock, if you save a TV channel
that transmits TXT/PDC on programme num-
ber 'P01', date and time will automatically be
TIME --:--
DATE --/--/--
SMART CLOCK [ON]
updated when the TV-Video Combi is in
Stand-
.
by
If you wish to switch this automatic time cor-
rection off, select 'OFF' for Smart Clock. You
can reactivate this function at any time by
selecting Smart Clock 'ON'.
END=EXIT
STATUS/EXIT
6.To end, press
.
4. TV SET FUNCTIONS
Selecting a TV channel
Volume control
Select the desired TV channel (= the programme
5 K 5 L
,
You can adjust the volume using
the remote control.
on
0..9
P+
P-
number) with
remote control.
,
or with
on the
If you would like to change the volume on the
5
-
5
+
machine, press
Combi.
or
on the TV-Video
Selection of the scart socket
If you want to mute the sound temporarily
To select the Scart socket, please enter 0,0,1,
MUTE
(e.g.:during a telephone call), press
on
0..9
with the keys
on the remote control. AV1
MUTE
the remote control. When you press
appears on the screen.
again, the sound will return at its original vol-
ume level.
Selection of the front A/V sockets
To select the front A/V sockets, please enter
0..9
0,0,2, with the keys
on the remote control.
'AV2' appears on the screen.
EN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture settings
Special TELETEXT functions
(14PV203/07, 14PV460/07)
The picture can be adjusted according to your
personal preferences.
These settings are automatically stored after
exiting the main menu.
In TELETEXT mode you can use the special
TELETEXT functions.
o
l
p
: enlarge font
MENU
1.Press the
appear.
. The main menu will
: switch TELETEXT decoder off
temporarily
K B
2.Select 'PICTURE CONTROL' with
: recall hidden information
B 1
L C
and confirm with
.
L C
p
l
o
: stop page changes
K B
3.Select an item using
, and then
: go back to start page
B 1
s 0
modify with
.
STATUS/EXIT
4.To end, press
.
Switch-off function (SLEEP TIMER)
SELECT K L ADJUST s
B
/
You can programme your set to switch-off auto-
matically after a predetermined period.
SLEEP
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
TINT
<
<
<
<
<
>
>
>
>
>
1.Press
.
The screen will show the time remaining until
switch-off, e.g.: '+0:30'.
END=EXIT
SLEEP
2.Press
repeatedly to extend the time
until switch-off in 30 minute increments.
The machine now counts backwards to the
switch-off time.
'TINT' appars only when receiving NTSC signals
from another source.
The maximum time period to be set until switch-
off is 2 hours.
How do I read TELETEXT?
(14PV203/07, 14PV460/07)
Many TV channels transmit TELETEXT informa-
tion along with their TV channels. With this TV-
Video Combi you can retrieve this information
and display it on the screen using the built-in
TELETEXT decoder.
If you would like to turn this function off, press
SLEEP
on the remote control several times
until switch-off appears. '--:--' will appear on the
screen.
TEXT
SLEEP
1.Press
to switch the TELETEXT
To check the time until switch-off, press
decoder on. Your TV-Video Combi will now
show TELETEXT for the TV channel you
on the remote control.
If a recording is in process, switch-off function
will be cancelled.
TEXT
have selected. Press
again to show
TELETEXT in transparent mode.
2.If you want to select another page, type in
the number of the page with the number but-
0..9
tons
on the remote control.
With the colour buttons on your remote control
you can directly select the page numbers
shown at the bottom of the TV screen.
The button
page.
takes you back to the start
TEXT
3.Press
decoder off.
to switch the TELETEXT
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Playback
Playing cassettes
Searching for a tape position with
picture (scanning)
You can use this TV-Video Combi to playback
recorded VHS video cassettes. You can operate
the TV-Video Combi using the remote control or
the buttons on the set.
Your TV-Video Combi can only record and play
standard VHS cassettes.
s 0
1.While a cassette is playing, press
(reverse) or
times.
B 1
(forward) one or more
K B
2.Press
to resume playback.
1.Put a cassette into the cassette slot. The
cassette is inserted automatically.
Still picture
DIGITAL STUDIO PICTURE CONTROL
Philips has developed a system which produces
the best possible playback quality. For old and
often-used video cassettes, this system
reduces interference. For new or high quality
cassettes, it emphasises the details.
2
STILL
1.During playback, press
tape and display a still picture.
2.To continue playback, press
Scanning and still motion interferes with the pic-
ture quality. The sound is switched off. This is not
a fault in your TV-Video Combi.
to stop the
.
K B
Picture/ sound quality is poor
When playing rental videos or older, poorer
quality cassettes, it may not be possible to
completely filter out picture and sound interfer-
ence. This is not a fault in your machine. Read
the section 'Manual tracking'.
Searching for tape position without
picture (forward wind and rewind)
L C
1.Stop the tape with
.
B 1
s 0
2.Press
(reverse) or
(forward).
L C
3.To stop the tape, press
.
K B
2.Press
to view the tape.
C/A
L C
3.To stop the playback, press
the TV-Video Combi.
or
on
Manual Tracking
To adjust the tracking manually, press P+ or
A
4.To eject the cassette, press EJECT
or
C/A
when the TV-Video Combi stops the
P-
.
on the TV/VCR during playback
playback.
Tracking returns to Automatic Tracking
L C
Adjustment when you press
tape.
or insert a
Do I need to change the playback speed
when playing back LP recordings?
During playback, the correct speed will auto-
matically be selected. For more information,
please read the section 'Selecting the recording
speed (SP or LP)' in the chapter 'Manual
recording'.
Playing back NTSC cassettes
Cassettes that have been recorded in the NTSC
standard (for example, American cassettes) can
be played back using this TV-Video Combi.
EN
10
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Manual recording
General information
Lining up recordings (assemble cut)
When you add a further recording to a cassette,
which already has a recording on it, a short
blank (flicker) can appear between the old and
the new recording or the picture itself can flicker.
To help reduce these from occurring, proceed as
follows:
1.Find the tape position of the old recording
where you want to insert the new recording.
2.Look at the last minute of the old recording
(playback).
Use 'Manual Recording' to make a sponta-
neous recording (for example, a programme cur-
rently being shown).
If you want to start and stop a recording manual-
ly, read the section 'Recording without auto-
matic switch-off'.
If you want to start a recording manually but
have it stopped automatically, read the section
'Recording with automatic switch-off'. (e.g.
not to record to the end of the tape)
Read the section 'Automatic recording from a
satellite receiver', if you want a recording to be
controlled automatically by a satellite receiver.
STILL 2
3.Press
at the tape position where
the new recording is to go and press
RECORD/OTR I
.
4.Now start recording as usual by pressing
Recording without automatic
switch-off
RECORD/OTR I
on the remote control.
L C
5.Stop recording with
.
1.Insert a cassette.
0..9
to select the pro-
P+
P-
2.Use
or
Selecting the recording speed (SP
or LP)
gramme number you want to record, for
example, 'P01'.
LP allows to double the recording duration on tape
(for example six hours instead of three hours on a
E180 cassette).
RECORD/OTR I
3.To start recording, press
4.To stop recording, press
.
L C
.
1.Press MENU . The main menu will appear.
2.Select 'RECORD SETUP' with
L C
K B
Recording with automatic switch-off
(OTR One-Touch-Recording)
B 1
and confirm with
.
1.Insert a cassette.
SELECT K L CHOOSE B
P+
P-
0..9
to select the pro-
2.Use
or
→RECORD SPEED
[SP]
gramme number you want to record.
RECORD/OTR I
3.Press
.
RECORD/OTR I
4.Each time you press
you will
add 30 minutes to the recording time.
END=EXIT
3.Select the required recording speed with
Preventing accidental erasing of
cassettes
B 1
.
STATUS/EXIT
4.To end, press
.
All cassettes (except for rental and pre-recorded
purchased cassettes) have a security tab on the
back of the cassette.
To prevent recording
over important record-
ings (erasing), you can
remove this security tab.
If you later decide to
record on a protected cassette, simply cover the
hole with adhesive tape.
'SP'/'LP'
'SP': StandardPlay (normal recording speed)
offers the usual first-class picture quality.
'LP': LongPlay (half recording speed, double
recording time). 6 hours can be recorded on a 3-
hour cassette (E180) with a somewhat reduced
picture quality.
EN
11
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Programming a recording (TIMER)
Programming a recording
General information
Use a TIMER programming to automatically
start and stop a recording at a later time or date.
The TV-Video Combi will switch to the right pro-
gramme number and begin recording at the cor-
rect time. With this TV-Video Combi, you can pre-
programme up to eight recordings within a peri-
od of one year. To make a programmed record-
ing, your TV-Video Combi needs to know:
1.Press MENU . The main menu will appear.
K B
L C
2.Select 'TIMER' with
. Then press
B 1
.
3.Select ONCE, DAILY, or WEEKLY recording
K B L C
B 1
with
. Then press
.
SELECT K L CHOOSE B
*the date you want to make the recording
*the programme number of the TV channel
*the start and stop time of the recording
*PDC on or off (14PV203/07, 14PV460/07)
This information is saved in a TIMER block.
→ONCE
DAILY
WEEKLY
TIMER LIST
END=EXIT
<14PV203/07, 14PV460/07>
What is 'PDC'?
If all TIMER blocks are in use, 'FULL' will appear
'PDC' (Programme Delivery Control) is used to
control the start and duration of TV channel
recordings. If a TV programme starts earlier or
ends later than scheduled, the TV-Video Combi
will turn on and off at the correct time.
What do I need to know about 'PDC'?
Usually the PDC time is the same as the start
time. But if your TV guide shows a PDC time
which is different from the programme’s sched-
uled start time, e.g. 20.10 (PDC 20.14), you
must enter the PDC time exact to the minute. If
you want a start time different from the PDC
time, you must switch PDC off.
on the TV screen.
4.Select TIMER block with
Selecting once/daily/weekly recordings
0..9
.
K B L C
Use
to select from the following
options:
'ONCE': Recording once
'DAILY': Repeated daily recordings from
Monday to Friday
'WEEKLY': Repeated weekly recordings (every
week on the same day)
0..9
5.With
buttons you can enter 'START'
(start time) , 'STOP' (end time) , 'PROG.'
(programme number) ‘VPS/PDC’ and 'DATE'.
Problems and solutions for pro-
grammed recordings
Programming a recording from the external
sources
You can also programme recording from an
external source via the Scart socket AV1 or the
front A/V connectors AV2.
The TV-Video Combi will not operate
* If you want to cancel the programmed record-
C/A
ing,press
.
Cassette is ejected during recording
* The end of the tape was reached during
recording.
6.When all inputs are correct, press
STATUS/EXIT
. The programming information
is stored in a TIMER block.
7.Insert a cassette with an intact security tab
(unprotected).
EN
12
Download from Www.Somanuals.com. All Manuals Search And Download.
How to change a programmed
recording (TIMER)
How to check, change or delete a
programmed recording (TIMER)
1.Press MENU . The main menu will appear.
1.Press MENU . The main menu will appear.
K B
L C
K B
L C
2.Select 'TIMER' with
. Then press
2.Select 'TIMER' with
. Then press
B 1
B 1
.
.
3.Select ONCE, DAILY, or WEEKLY recording
K B
L C
3.Select 'TIMER LIST' with
, and
K B L C
B 1
B 1
with
. Then press
.
confirm with
.
0..9
4.Select a TIMER block with
. (The flash-
SELECT K L CHOOSE B
ing number indicates an empty TIMER
block.)
ONCE
DAILY
WEEKLY
→TIMER LIST
ONCE
TIMER - 1 2 3 4 5 6 7 8 -
END=EXIT
SELECT TIMER NUMBER
END=EXIT
B 1
4.Select timer block with
.
CLEAR
5.To cancel the recording, press
.
STATUS/EXIT
6.To end, press
.
CLEAR
5.Press
to delete information, and
0..9
.
input correct information with
STATUS/EXIT
6.To end, press
.
EN
13
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Other functions
STATUS/EXIT
5.To end, press
.
Switching the status display off or
on
6.Insert a cassette.
7.Start the continuous playback with
K B
.
Along with the on screen menu, the status dis-
play also displays information on the current
operating status (counter, playback, recording,
TV channel, etc.) on the TV screen.
Blue Background on or off
If you want the screen to be solid blue when a
weak signal is received, set BLUE BACK-
GROUND to 'ON'. The screen will be blue and
the sound will be muted. Or, if you want to
receive the weak signal, set BLUE BACK-
GROUND to 'OFF'.
MENU
1.Press
. The main menu will appear.
K B L C
2.Select 'VCR SET UP' using
and
B 1
confrim with
.
K B L C
3.Select 'STATUS DISPLAY' with
.
SELECT K L CHOOSE B
MENU
1.Press
. The main menu will appear.
K B L C
2.Select 'VCR SET UP' using
confrim with
3.Select 'BLUE BACKGROUND' with
and
REPEAT PLAY
→STATUS DISPLAY
[ON]
[ON]
B 1
.
BLUE BACKGROUND[ON]
K B
L C
.
END=EXIT
SELECT K L CHOOSE B
B 1
REPEAT PLAY
STATUS DISPLAY
→BLUE BACKGROUND [ON]
[ON]
[ON]
4.Select 'ON' or 'OFF' with
Which settings can I choose?
.
'ON': Shows the status display for a few sec-
onds only.
'OFF': Switches off the status display.
END=EXIT
STATUS/EXIT
5.To end, press
.
4.Select 'OFF' (no blue background) or 'ON'
B 1
(blue background on) with
.
Continuous playback
STATUS/EXIT
5.To end, press
.
This function can be used to play a cassette
over and over again. When the end of the cas-
sette is reached, it will rewind and start from the
beginning again. This function is activated or
deactivated as follows.
Parental control (Child lock)
This function protects your TV-Video Combi from
unwanted use. All button functions on the front
of the machine are blocked.
MENU
1.Press
. The main menu will appear.
K B L C
2.Select line 'VCR SET UP' using
and confirm with
Programmed recordings will still be recorded (in
spite of the parental control) and cannot be
interrupted.
B 1
.
K B L C
3.Select 'REPEAT PLAY' using
.
SELECT K L CHOOSE B
MENU
1.Press
.
→REPEAT PLAY
STATUS DISPLAY
[ON]
[ON]
The main menu will appear.
K B
L C
2.Use
UP'. Then press
to select 'GENERAL SET
B 1
BLUE BACKGROUND[ON]
.
K B
L C
3. Use
4. Use
to select 'CHILD LOCK'.
END=EXIT
B 1
to select 'ON'.
B 1
4.Select function 'ON' with
.
'If a button at the front of the machine is pressed
while parental control is active, ’CHILD LOCK
ACTIVE’ will appear on the screen for a few sec-
onds.
If you select 'OFF', continuous playback will be
switched off.
EN
14
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Before you call an engineer
If, contrary to expectation, you have any problems using this TV-Video Combi, it may be caused by the fol-
lowing reasons.
Your TV-Video Combi does not respond to any
button being pressed:
*There is no power supply: check the power supply.
*Parental control is on:Switch the parental control off.
*There is a technical problem: disconnect from the
mains power supply for 5 minutes, then power-up
again.
If this doesn't help, you can reset your TV-Video
Combi to default factory settings.
Resetting devices to default factory settings
<14PV203/07, 14PV460/07>
*
’PDC’ switched on but ‘PDC time’ wrong: Enter
‘PDC time’ exactly to the minute. Check your
aerial connection.
Smart Clock does not work
*You have stored on programme number ‘P01’ a
TV channel that does not transmit TELETEXT.
Store on ‘P01’ a TV channel that transmits
TELETEXT.
*Poor TELETEXT reception. Store a TV channel
on ‘P01’ with good TELETEXT reception.
*You have not activated the Smart Clock func-
tion. Switch the function ‘ON’.
*
Warning: by doing so you will the information
stored (TV channels, time and date, TIMER)
will be cleared.
1.Switch the TV-Video Combi to
.
stand-by
RECORD
P -
at the
2.Press and hold
same time for 2 seconds or more.
Cassette is jammed in the TV-Video Combi
and
You can also call the customer service centre
in your country.The telephone numbers can be
found on the back of this instruction manual.
Have the model number (MODEL NO) and the
production number (PROD.NO.) of your TV-
Video Combi ready.
*
Don’t use force. Disconnect the set from the
mains and reconnect it again after a few sec-
onds.
Remote control does not work
*
*
*
Remote control is not pointed at the TV-Video
Combi.
Take out the batteries, wait for 10 seconds and
place them back in the remote control.
Batteries have run out. Change the batteries.
No picture when you play a cassette
There is no recording on the cassette.
*
Poor picture quality when you play a cas-
sette
*
The cassette is badly worn-out or of poor qual-
ity. Use a new cassette.
*
Tracking is not properly adjusted. Turn to sec-
tion ‘Manual Tracking’.
No recording possible
*
The TV channel you want to record is not
stored or you selected the wrong programme
number: check TV channels stored.
*
A cassette was inserted that does not have the
security tab (cannot be used to record): Insert
a cassette with an intact security tab or change
cassette. For more information, please see the
section ‘Preventing accidental erasing of cas-
settes’ in chapter ‘Manual Recording’.
EN
15
Download from Www.Somanuals.com. All Manuals Search And Download.
PHILIPS NORGE AS
Sandstuveien 70,
PO Box 1, Manglerud
N-0612 Oslo
PHILIPS AUSTRIA GMBH
Triesterstrasse 64
1101 Wien
AUSTRIA
Tel: 0810 001 203
PHILIPS PORTUGUESA, S.A.
Consumer Information Centre
Rua Dr. António Loureiro Borge, nr. 5
Arquiparque, Miraflores
P-2795 L-A-VEHLA
NORWAY
Phone: 2274 8250
PORTUGAL
Phone: 021-4163063
OY PHILIPS AB
Sinikalliontie 3,
02630 Espoo
PHILIPS INFO CENTER
Alexanderstrasse 1
20099 Hamburg
PHILIPS CE, The Philips Centre,
420 - 430 London Road,
Croydon, Surrey
FINLAND
GERMANY
CR9 3 QR
puh. 09 615 80 250
Tel: 0180-53 56 767
UNITED KINGDOM
Phone: 0208-665-6350
PHILIPS KUNDTJÄNST SERVICE CONSOMMATEURS PHILIPS
PHILIPS KUNDECENTER
Frederikskaj 6,
1780 København V
DANMARK
Kottbygatan 7,
Akalla,
16485 Stockholm
SWEDEN
BP 0101
75622 Paris Cédex 13
FRANCE
Phone: 0825-889 789
Tlf: 8088 2814
Phone: 08-598 52 250
PHILIPS POLSKA
Al. Jerozolimskie 195B
02-222 Warszawa
POLSKA
PHILIPS ELECTRONICS IRELAND LIMITED
Consumer Information Centre
Newstead, Clonskeagh
DUBLIN 14
Phone: 01-7640292
PHILIPS REPRESENTATION OFFICE
Ul. Usacheva 35a
119048 MOSCOW
RUSSIA
Phone: 095-937 9300
TEL.: (022)-571-0-571
PHILIPS CONSUMER ELECTRONICS
Servizio Consumatori
Via Casati 23
20052 Monza - Milano
ITALY
PHILIPS INFO CENTER
Fegistrasse 5
8957 Spreitenbach
SUISSE
Tel.: 0844-800 544
Phone: 800 820026
PHILIPS Iberia, S.A.
C/Martinez Villergas, 49
28027 MADRID
SPAIN
Phone: 902-11 33 84
PHILIPS MAGYARORSZÁG KFT.
Fehérvári út 84/a.
Budapest 1119
HUNGARY
Phone: (01)-382-1700
PHILIPS CUSTOMER CARE CENTER
Twee Stationsstraat 80/
80 Rue des Deux Gares
1070 BRUSSEL/BRUXELLES
BELGIUM (for BENELUX)
Tel: 070-222303
PHILIPS CONSUMENTENLIJN
Postbus 102 5600 AC Eindhoven
NEDERLAND
Tel.: 0900-8406
T6310EZ-I * * * *
(0EMN01990)
Download from Www.Somanuals.com. All Manuals Search And Download.
|