12nc: 3139 115 22081
Printed in China
Use this simple and quick way to
watch your favorite DVD movie
and enjoy your Home Cinema
experience!
IMPORTANT!
MX5500D
Attach the front speakers and the rear (surround)
speakers to the mini speaker stands before making
the connections to the DVD system.
Refer to owner’s manual for detailed set up
instructions.
Recommended Speaker Setup
Rear ofTV
(example only)
Y
Front Speaker
(Right)
Front Speaker
(Left)
FM Antenna
Center Speaker
AM Antenna
75
V
S-
V
I
D
E
O
I
N
Pr
/
C
r
A
UDIO
U
O
T
Pb
/
C
b
L
VI
DE
O
IN
Y
R
~ AC MAINS
L
AM
R
FM ANTENNA
C
AUDIO
VIDEO
OUT
P
DIGITAL
OUT
AUX
TV
IN
LINE
OUT
SL
SR
SUB
CVBS
L
Pb
Y
P-SCAN
ON OFF
R
DIGITAL
IN
S-VIDEO
Helpful Hints
You only need to make one video connection to yourTV in
order to view the DVD playback.
Rear Speaker
(Surround Right)
Rear Speaker
(Surround Left)
S-VIDEO
IN
If yourTV has S-Video or Component
Pr/Cr
Pb/Cb
Y
(Pr PbY) video jacks, use one of these
video connections instead for higher picture
quality.
If yourTV has only a single Antenna In jack, you
will need an accessory RF modulator. The RF modulator
converts the video from the DVD system so it can play
through theTV’sAntenna connector. Refer to your
owner’s manual for proper connection.
Subwoofer
ANTENNA IN
Connecting Speaker Cable
Do not switch the P-SCAN to‘ON’ position,
unless you have connected the DVD system to a
Progressive ScanTV using the Component (Pr PbY)
video jacks.
P-SCAN
ON OFF
.047"
(12mm)
PUSH IN
PUSH
DOWN
When listening toTV programs,press TV/AV button on
the remote to set the DVD system toTV/AV mode in order for
the sound to be heard.
a
b
c
Download from Www.Somanuals.com. All Manuals Search And Download.
MMXX5500D
DVDVIDEO DIGITAL SURROUND SYSTEM
Need help? Call us!
Return
Philips representatives are ready to help you with
any questions about your new product.We can guide you
through Connections, First-time Setup, or any of the Features.
We want you to start enjoying your new product right away!
yourWarranty
Registration Card
within 10 days
Y
CALL US BEFORE YOU CONSIDER
RETURNING THE PRODUCT!
1-800-531-0039
or
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
Canada
Use of controls or adjustments or
performance of procedures other
than herein may result in hazardous
radiation exposure or other unsafe
operation.
English:
This digital apparatus does not exceed
the Class B limits for radio noise
emissions from digital apparatus as set
out in the Radio Interference
Regulations of the Canadian
Department of Communications.
ATTENTION
Français:
L'utilisation des commandes ou
réglages ou le non-respect des
procédures ci-incluses peuvent se
traduire par une exposition
dangereuse à l'irradiation.
Cet appareil numérique n'emet pas
de bruits radioélectriques dépassant
les limites applicables aux appareils
numériques de Class B prescrites dans
le Règlement sur le Brouillage
Radioélectrique édicté par le Ministère
des Communications du Canada.
ATENCIÓN
El uso de mando o ajustes o la
ejecucción de métodos que no sean
los aquí descritos puede ocasionar
peligro de exposición a radiación.
This warning label is located on the rearside
and inside this laser product.
INVISIBLE
:
CAUTION
LASER RADIATION
WHEN OPEN. DO NOT STARE INTO BEAM.
INVISIBLE LASER RADIATIONWHEN OPEN.
:
DANGERAVOID DIRECT EXPOSURE TO BEAM.
AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET
ALTTIINANAKYMATTOMAALLE LASERSATEILYLLE. ALA
VARO!
KATSO SATEESEEN.
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD.
OCH SPARREN AR URKOPPLAD. BETRAKTA EJ STRÅLEN.
VARNING!
or
DANGER- Invisible laser radiation when open.
AVOID DIRECT EXPOSURE TO BEAM.
This product incorporates copyright
protection technology that is protected by
method claims of certain U.S. patents and
other intellectual property rights owned by
Macrovision Corporation and other rights
owners. Use of this copyright protection
technology must be authorized by
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro-Logic” and the
double-D symbol are trademarks of
Dolby Laboratories. Confidential
Unpublished Works. ©1992-1997 Dolby
Laboratories, Inc. All rights reserved.
Macrovision Corporation, and is intended
for home and other limited viewing uses
only unless otherwise authorized by
Macrovision Corporation. Reverse
Manufactured under license from Digital
Theater Systems, inc. US Pat. No.
5,451,942 and other worldwide patents
issued and pending. “DTS” and “DTS
Digital Surround” are trademarks of
Digital Theater Systems, Inc. 1996 Digital
Theater Systems, Inc. All rights reserved.
engineering or disassembly is prohibited.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1 2
3
45 6
7
8
90 ! @ # $ %
^
&*
OPEN•CLOSE
DVD VIDEO DIGITAL SURROUND SYSTEM
DISC
1
DISC
2
DISC
3
DISC
4
DISC
5
DISC
DISC
DISC
DISC
DISC
1
2
3
4
5
TREBLE
PLAY•PAUSE STOP
SEATING SOURCE
VOLUME
DVD
SEARCH
SURROUND
PROG
TUNING CLOCK•TIMER
5
DISC CHANGER
L
BASS
STANDBY-ON
iR SENSOR
EJECT
MEDIA SLOT
fi
DISC/
MEDIA TUNER AUX/DI
TV/AV
$
1
4
2
5
8
3
6
›
‹
¤
7
9
SURR.
SOUND
#
^
0
VOL
SYSTEM MENU
DISC MENU
(
)
@
SEATING
PREV
ZOOM
⁄
!
NEXT
OK
¡
STOP
PLAY/PAUSE
0
º
ª
™
PROGRAM
DISC SKIP REPEAT REPEAT
A-B
£
≤
∞
§
≥
VOICE
DIM
MUTE
SLEEP
SUB
TV VOL
•
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Return your Warranty Registration card today to
ensure you receive all the benefits you’re entitled to.
• Once your Philips purchase is registered, • So complete and return theWarranty
you’re eligible to receive all the privileges
of owning a Philips product.
Registration Card enclosed with your
purchase at once, and take advantage
of these important benefits.
Warranty
Owner
Model
Verification
Confirmation Registration
Registering your product
within 10 days confirms
your right to maximum
protection under the
terms and conditions of
your Philips warranty.
Your completed Warranty Returning your Warranty
Registration Card serves
as verification of owner-
Registration Card right
away guarantees you’ll
ship in the event of prod- receive all the information
uct theft or loss.
and special offers which
you qualify for as the
owner of your model.
Know these
For Customer Use
Enter below the Serial No. which is locat-
ed on the rear of the cabinet. Retain this
information for future reference.
safety
CAUTION
symbols
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Model No. _______________________
Serial No. ________________________
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This “bolt of lightning” indi-
cates uninsulated material
WARNING: TO PREVENT
FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
t
within your unit may cause
an electrical shock. For the safety of
everyone in your household, please do
not remove product covering.
CAUTION: To prevent electric
shock, match wide blade of plug to
wide slot, and fully insert.
The “exclamation point” calls
attention to features for
s
which you should read the
enclosed literature closely to prevent
operating and maintenance problems.
MAC5097
4
Download from Www.Somanuals.com. All Manuals Search And Download.
S
Hurry!
Congratulations on your purchase,
and welcome to the “family!”
Dear Philips product owner:
Thank you for your confidence in Philips.You’ve selected one of the best-built,
best-backed products available today.And we’ll do everything in our power to
keep you happy with your purchase for many years to come.
As a member of the Philips “family,” you’re entitled to protection by one
of the most comprehensive warranties and outstanding service networks
in the industry.
What’s more, your purchase guarantees you’ll receive all the information
and special offers for which you qualify, plus easy access to accessories
from our convenient home shopping network.
And most importantly you can count on our uncompromising commitment
to your total satisfaction.
All of this is our way of saying welcome – and thanks for investing in a
Philips product.
Sincerely,
Lawrence J. Blanford
President and Chief Executive Officer
P.S. Remember, to get the most from your Philips product, you
must return your Warranty Registration Card within 10 days.
So please mail it to us right now!
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
12.
Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer or sold with
the apparatus.When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
4. Follow all instructions.
5. Do not use this apparatus near
water.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance with
the manufacturer´s instructions.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
8. Do not install near any heat sources
such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
9. Do not defeat the
safety purpose of the
15.Battery usage CAUTION –To
prevent battery leakage which may result in
bodily injury, property damage, or damage
to the unit:
polarized or
grounding-type plug.
AC Polarized
Plug
A polarized plug has two blades with one
wider than the other.A grounding type plug
has two blades and a third grounding prong.
The wide blade or the third prong are
provided for your safety. If the provided plug
does not fit into your outlet, consult an
electrician for replacement of the obsolete
outlet.
G
G
G
Install all batteries correctly, + and - as
marked on the unit.
Do not mix batteries (old and new or
carbon and alkaline, etc.).
Remove batteries when the unit is not used
for a long time.
10. Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
EL 6475-E004: 02/8
WARNING!
11.Only use attachments/accessories
To reduce the risk of fire or electric
shock, this apparatus should not be
exposed to rain or moisture, and objects
filled with liquids, such as vases, should
not be placed on this apparatus.
specified by the manufacturer.
Class II equipment symbol
This symbol indicates that the unit has
a double insulation system
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
English ------------------------------------------------ 8
Français -------------------------------------------- 52
Español --------------------------------------------- 96
Environmental information
This system complies with the FCC rules,
Part 15 and with 21 CFR 1040.10.
Operation is subject to the following two
conditions:
– This device may not cause harmful
interference, and
All unnecessary packaging has been omitted. We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
– This device must accept any
interference received, including
interference that may cause undesired
operation.
Your system consists of materials which can be
recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old equipment.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
General Information
Supplied accessories...................................................... 10
Care and safety information ..................................... 10
Disc Operations
Playable discs ..................................................................... 24
Playing discs ........................................................................ 24
Turning on/off auto Eco standby mode ...... 25
Using the Disc Menu .................................................... 25
Basic playback controls ................................................ 25
Resuming playback from the last stopped
point (DVD/VCD)................................................... 25
Replacing discs without interrupting
playback ......................................................................... 25
Selecting various repeat functions ......................... 26
Repeat play mode ................................................... 26
Repeating a section within a
Connections
Step 1: Set up the speakers....................................... 11
Step 2: Placing the speakers and subwoofer ... 11
Step 3: ConnectingTV.................................................. 12
Using CompositeVideo jack (CVBS)............ 12
Using ComponentVideo jacks (Pr PbY) .... 12
Using S-Video jack................................................... 13
Using an accessory RF modulator.................. 13
Step 4: Connecting speakers and subwoofer . 14
Step 5: Connecting FM/AM antennas.................. 14
Step 6: Connecting the power cord .................... 15
chapter/track............................................................... 26
Program favorite tracks
(audio CDs andVCDs) ....................................... 26–27
Clearing the program ............................................ 27
Using the menu bar to program ............................ 27
Playing MP3/Picture disc (Kodak, JPEG) ............. 28
Program MP3 disc .......................................................... 28
Connections (optional)
Connecting aVCR or Cable/Satellite Box ........ 16
Viewing and listening to the playback .......... 16
Using theVCR for recording DVDs .............. 16
Connecting digital audio equipment .................... 17
Listening to the playback ..................................... 17
Recording (digital).................................................... 17
Media Slot Operations
About media slot ............................................................ 29
Playing JPEG pictures from memory card......... 29
Functional Overview
Main unit and remote control ......................... 18–19
Control buttons available on the
DVD Menu Options
Using the menu bar ....................................................... 30
Using the Setup Menu ................................................. 31
Setting theTV shape .............................................. 31
Setting the video output ...................................... 32
Screen saver - turning on/off ............................. 32
Setting the analog output .................................... 32
Setting the digital output ..................................... 33
Setting the PCM output ....................................... 33
Night mode- turning on/off ............................... 34
Restoring the original settings........................... 34
Restricting playback by parental control ..... 35
Changing the password ........................................ 36
remote only................................................................. 19
Getting Started
Step 1: Inserting batteries into the
remote control ................................................................. 20
Using the remote control to operate the
system............................................................................. 20
Step 2: Setting the clock .............................................. 20
Step 3: Setting theTV ................................................... 21
Changing the NTSC/PAL setting via the
remote control .......................................................... 21
Selecting the color system that
corresponds to yourTV ....................................... 21
Step 4: Selecting speaker layout.............................. 22
Changing seating control position .................. 22
Setting the speakers’ channels .......................... 23
Step 5: Setting language preference ..................... 23
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Tuner Operations
Tuning to radio stations ............................................... 37
Presetting radio stations.............................................. 37
Using the Plug and Play ........................................ 37
Automatic presetting ............................................. 38
Manual presetting..................................................... 38
Selecting a preset radio station............................... 38
Deleting a preset radio station ........................ 38
Timer Operations
Setting the timer.............................................................. 39
Activating/Deactivating the timer ................... 39
Setting the Sleep timer ................................................ 40
Sound andVolume Controls
Sound Control.................................................................. 41
Selecting surround sound.................................... 41
Turning on/off clear voice effect ...................... 41
Changing subwoofer volume level ................. 41
Adjusting Bass/Treble level.................................. 41
Selecting digital sound effects ........................... 41
Volume Control ............................................................... 41
Other Functions
Switching on/off ............................................................... 42
Switching to active mode .................................... 42
Switching to Eco Power standby mode ...... 42
Switching to standby mode (view clock) ... 42
Dimming system’s display screen ........................... 42
Recording to an external device ............................ 42
Using the remote to operate your television ... 42
Specifications .......................................................... 43
Troubleshooting........................................... 44–45
Glossary ................................................................. 46–47
LimitedWarranty.............................................. 48
9
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
Supplied accessories
Speaker cables
Care and safety information
Avoid high temperatures, moisture,
water and dust
(5x)
– Do not expose the system, batteries or discs
to humidity, rain, sand or excessive heat (caused
by heating equipment or direct sunlight.) Always
keep the disc tray closed to avoid dust getting
on the lens.
Subwoofer cable
Audio cable
(white, red)
Avoid condensation problem
– The lens may cloud over when the player is
suddenly moved from cold to warm
surroundings, making it impossible to play a disc.
Leave the player in the warm environment until
the moisture evaporates.
Composite video cable
(yellow)
Component video
cables
(red/blue/green)
Do not block the vents
– Do not operate the DVD system in an
enclosed cabinet and allow about 10 cm
(4 inches) of free space all around the player for
adequate ventilation.
FM wire antenna
AM loop antenna
10 cm
(4 inches)
10 cm
(4 inches)
PHILIPS
10 cm
(4 inches)
DVD Home Cinema System
Care of disc
– To clean a CD, wipe it in a
straight line from the center
towards the edge using a soft,
lint-free cloth. Do not use
cleaning agents, as they may
damage the disc!
DISC/
MEDIA TUNER AUX/DI
TV/AV
1
4
2
5
8
3
6
7
9
SURR.
SOUND
0
VOL
SYSTEM MENU
DISC MENU
Remote Control and
two AA batteries
SEATING
PREV
ZOOM
NEXT
OK
STOP
PLAY/PAUSE
– Write only on the printed side of a CDR(W)
and only with a soft felt-tipped pen.
– Handle the disc by its edge, do not touch the
surface.
DISC SKIP REPEAT REPEAT PROGRAM
A-B
VOICE
DIM
MUTE
SLEEP
SUB
TV VOL
Care of the cabinet
– Use a soft cloth slightly moistened with a
mild detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
AC power cable
Finding a suitable location
– Place the player on a flat, hard, stable surface.
Mini speaker stands
and screws
(4x) (8x)
Brackets and screws
(4x)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Step 1: Set up the speakers
Step 2: Placing the speakers
and subwoofer
Front Speaker
(Left)
Center speaker and
DVD system
1
Front Speaker
(Right)
2
1
4
3
3
Subwoofer
Surround
Speaker (Left)
Surround
Speaker (Right)
1
OR
2
For best possible surround sound, all the
speakers (except the subwoofer) should be
placed at the same distance from the listening
position.
1 Before connecting the speakers to the DVD
system, firmly attach the mini speaker stands to
the front and the surround speakers using the
supplied screws.
OR
1 Place the front left and right speakers at equal
distances from theTV and at an angle of
approximately 45 degrees from the listening
position.
2 Alternatively, you can choose to mount the
speakers on the wall. Attach the supplied
bracket firmly to the rear of the speakers using
the supplied screws. Then mount a screw (not
supplied) on the wall where the speaker is to be
hung and hook the speaker securely onto the
mounted screw.
2 Place the center speaker above theTV or the
DVD system so that the center channel’s sound
is localized.
3 Place the surround speakers at normal listening
ear level facing each other or mounted on the
wall.
CAUTION!
You should get a qualified person to
attach the brackets to the wall. DO
NOT do it by yourself to avoid
unexpected damage to the equipment
or injury to personnel.
4 Place the subwoofer on the floor near theTV.
Notes:
– To avoid magnetic interference, do not position
the front speakers too close to yourTV.
– Allow adequate ventilation around the DVD
system.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Step 3: ConnectingTV
COMPONENT
VIDEO IN
COMPONENT
VIDEO IN
S-VIDEO
IN
S-VIDEO
IN
Pr/Cr
Pb/Cb
Y
Pr/Cr
AUDIO
OUT
AUDIO
OUT
Pb/Cb
Y
VIDEO IN
VIDEO IN
COMPONENT
VIDEO IN
COMPONENT
VIDEO IN
S-VIDEO
IN
S-VIDEO
IN
Pr/Cr
AUDIO
OUT
Pr/Cr
AUDIO
OUT
Pb/Cb
Y
Pb/Cb
Y
V
I
D
E
O
I
N
V
I
D
E
O
I
N
L
R
L
R
AM
AM
1
FM ANTENNA
FM ANTENNA
1
C
C
AUDIO
VIDEO
OUT
AUDIO
VIDEO
O
DIGITAL
OUT
AUX
TV
IN
LINE
OUT
DIGITAL
OUT
AUX
TV
IN
LINE
OUT
SL
CVBS
SL
CVB
L
L
SR
SR
Y
P-SCAN
ON OFF
P-SCAN
ON OFF
SUB
SUB
R
R
DIGITAL
IN
DIGITAL
IN
S-VIDEO
S-VIDEO
2
3
3
2
IMPORTANT!
IMPORTANT!
– If both S-Video and Component
– You only need to make one video
connection from the following options,
depending on the capabilities of yourTV
system.
– S-Video or ComponentVideo
connection provides higher picture
quality. These options must be available
on yourTV.
(Pr PbY)Video connections are used to
connect to yourTV, the video signal will
automatically switch to S-Video when
you power up the DVD system. To set
the VIDEO OUT(put) to ‘Pr PbY,’ see
page 32.
– The progressive scan video quality is
only possible through ComponentVideo
(Pr PbY) output.
– Connect the DVD system directly to
theTV.
Using CompositeVideo jack (CVBS)
Using ComponentVideo jacks
(Pr PbY)
1 Use the composite video cable (yellow) to
connect the DVD system’s CVBS jack to the
video input jack (or labeled as A/V In, Video In,
Composite or Baseband) on theTV.
1 Use the component video cables (red/blue/
green) to connect the DVD system’s Pr PbY
jacks to the corresponding Component video
input jacks (or labeled as Pr/Cr Pb/CbY orYUV)
on theTV.
2 To hear theTV channels through this DVD
system, use the audio cables (white/red) to
connect TV IN (L/R) jacks to the
2 To hear theTV channels through this DVD
system, use the audio cables (white/red) to
connect TV IN (L/R) jacks to the
corresponding AUDIO OUT jacks on theTV.
3 Set the P-SCAN switch to ‘OFF.’
corresponding AUDIO OUT jacks on theTV.
3 If you are using a Progressive ScanTV (TV must
indicate Progressive Scan or ProScan capability,)
set the P-SCAN switch to ‘ON.’ Otherwise,
set it to ‘OFF.’
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
RF coaxial cable toTV
2
COMPONENT
VIDEO IN
S-VIDEO
IN
Pr/Cr
Back of RF Modulator
AUDIO
OUT
(example only)
Pb/Cb
Y
VIDIN
INT IN
TO TV
AUDIO IN
VIDEO
IN
R
L
COMPONENT
VIDEO IN
S-VIDEO
IN
Pr/Cr
AUDIO
OUT
Pb/Cb
Y
V
I
D
E
O
I
N
CH3 CH4
1
Antenna or
CableTV Signal
L
R
AM
L
R
AM
FM ANTENNA
FM ANTENNA
C
AUDIO
VIDO
OUT
C
AUDIO
VIDEO
OUT
DIGITAL
OUT
AUX
TV
IN
LINE
OUT
Pr
Pr
DIGITAL
OUT
AUX
IN
TV
IN
LINE
OUT
SL
C
SL
SR
SUB
CVBS
L
L
SR
Pb
Y
P-SCAN
ON OFF
P-SCAN
ON OFF
SUB
R
R
Y
DIGITAL
IN
S-VIDEO
DIGITAL
IN
S-VIDEO
3
1
2
3
IMPORTANT!
IMPORTANT!
– If the picture is distorted, check the
Video Output setting. Make sure it is set
to ‘S-Video,’ see page 32.
– If yourTV only has a single Antenna In
jack (or labeled as 75 ohm or RF In,)
you will need an RF modulator in order
to view the DVD playback on theTV.
See your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
Using S-Video jack
1 Use the S-video cable (not supplied) to connect
the DVD system’s S-VIDEO OUT jack to the
S-Video input jack (or labeled asY/C or S-VHS)
on theTV.
Using an accessory RF modulator
1 Use the composite video cable (yellow) to
connect the DVD system’s CVBS jack to the
video input jack on the RF modulator.
2 To hear theTV channels through this DVD
system, use the audio cables (white/red) to
connect TV IN (L/R) jacks to the
2 Use the RF coaxial cable (not supplied) to
corresponding AUDIO OUT jacks on theTV.
connect the RF modulator to yourTV’s RF jack.
3 Set the P-SCAN switch to ‘OFF.’
3 Set the P-SCAN switch to ‘OFF.’
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Step 4: Connecting speakers
and subwoofer
Step 5: Connecting FM/AM
antennas
Front
Left
Front
Right
FM
antenna
Center
➠
AM
antenna
1
L
R
fix the claw
into the slot
2
C
DIGITAL
OUT
AUX
IN
SL
SR
SUB
L
L
R
AM
R
FM ANTENNA
DIGITAL
IN
C
AUDIO
VIDEO
OUT
Pr
DIGITAL
OUT
AUX
IN
TV
IN
LINE
OUT
SL
SR
SUB
CVBS
L
Pb
Y
R
Subwoofer
Surround
Right
Surround
Left
DIGITAL
IN
S-VIDEO
Connect the supplied speaker systems using the
supplied speaker cables by matching the colors
of the jacks and speaker cables. Fully insert the
stripped portion of the speaker wire into the
jacks.
1 Connect the supplied AM loop antenna to the
AM jack. Place the AM loop antenna on a shelf
or attach it to a stand or wall.
2 Connect the supplied FM antenna to the FM
jack. Extend the FM antenna and fix its ends to
the wall.
Speakers / Subwoofer
Front Left (FL) (L)
Front Right (FR) (R)
Center (C)
-
black
black
black
black
black
black
+
white
red
For better FM stereo reception, connect an
external FM antenna (not supplied.)
green
blue
Surround Left (SL)
Surround Right (SR)
Subwoofer (SUB)
gray
purple
Notes:
– Ensure that the speaker cables are correctly
connected. Improper connections may damage the
system due to short-circuit.
AM
FM ANTENNA
– Do not connect more than one speaker to any
one pair of +/- speaker jacks.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
Notes:
– Adjust the position of the antennas for optimal
reception.
– Position the antennas as far as possible from
yourTV,VCR or other radiation source to prevent
unwanted interference.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Step 6: Connecting the power
cord
~
AC MAINS
AM
FM ANTENNA
AUDIO
VIDEO
OUT
Pr
DIGITAL
OUT
AUX
IN
TV
IN
LINE
OUT
CVBS
L
Pb
Y
P-SCAN
ON OFF
R
DIGITAL
IN
S-VIDEO
COMPONENT
VIDEO IN
S-VIDEO
IN
Pr/Cr
Pb/Cb
Y
AUDIO
OUT
~
AC MAINS
VIDEO IN
After everything is connected
properly, plug in the AC power cord to
the power outlet.
Never make or change any connections with the
power switched on.
On the DVD system,
"AUTO INSTALL - PRESS PLAY" may
appear on the display panel. Press ÉÅ on the
front panel to store all available radio stations or
press Ç to exit (see page 37 “Tuner
Operations”.)
PLAY•PAUSE
AUTO INSTALL - PRESS PLAY
DVD VIDEO DIGITAL SURROUND SYSTEM
TREBLE
PLAY•PAUSE STOP
SEATING SOURCE
SURROUND
VOLUME
DVD
SEARCH
PROG
TUNING CLOCK•TIMER
HANGER
U
BASS
EJECT
MEDIA SLOT
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (optional)
Connecting aVCR or
Cable/Satellite Box
COMPONENT
VIDEO IN
S-VIDEO
IN
Pr/Cr
AUDIO
OUT
Pb/Cb
Y
VIDEO IN
1
~
AC MAINS
ANT IN
TO TV
VCR or
Cable/Satellite
Box
~
AC MAINS
L
R
AM
FM ANTENNA
3
C
AUDIO
VIDEO
OUT
Pr
DIGITAL
OUT
AUX
IN
T
LINE
OUT
SL
SR
SUB
CVBS
P-SCAN
N OFF
DIGITAL
IN
S-VIDEO
2
4
Viewing and listening to the playback
Using theVCR for recording DVDs
Some DVDs are copy-protected. You cannot
record or dub protected discs using aVCR.
1 Connect theVCR or Cable/Satellite Box to the
TV as shown.
3 Connect the DVD system’s CVBS jack to the
2 Connect the DVD system’s AUX IN (R/L)
jacks to the AUDIO OUT jacks on theVCR or
cable/satellite box.
VIDEO IN jack on theVCR.
4 Connect the DVD system’s LINE OUT (R/L)
jacks to the AUDIO IN jacks on theVCR.
This will allow you to make analog stereo (two
channel, right and left) recordings.
Before starting operation, press AUX/DI on
the remote to select “AUX” in order to activate
the input source.
To view DVD playback while recording,
you must connect the DVD system to yourTV
using the S-VIDEO (as shown above) or the
Component (Pr PbY) video connection.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (optional)
Connecting digital audio
equipment
~ AC MAINS
L
R
AM
FM ANTENNA
C
AUDIO
VIDEO
OUT
Pr
DIGITAL
OUT
AUX
IN
TV
IN
LINE
OUT
2
1
SL
SR
SUB
CVBS
L
R
Y
DIGITAL
IN
S-VIDEO
DIGITAL IN
DIGITAL OUT
(for example)
CD Recorder
Notes:
Listening to the playback
– Some DVDs are copy-protected. You cannot
record the disc through a VCR or digital recording
device.
– Always refer to the owner’s manual of the other
equipment for complete connection and usage
details.
1 Connect the DVD system’s DIGITAL IN jack
to the DIGITAL OUT jack on a digital audio
device.
Before starting operation, press AUX/DI on
the remote to select “DI” in order to activate
the input source.
Recording (digital)
2 Connect the DVD system’s DIGITAL OUT
jack to the DIGITAL IN jack on a digital
recording device (DTS-DigitalTheater System
compatible, with a Dolby Digital decoder, for
example.)
Before starting operation, set the DIGITAL
OUTPUT according to the audio connection.
(See page 33 “Setting the digital output”.)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview (illustrations on page 3)
! ÉÅ PLAY•PAUSE
Main unit and remote control
–
DISC: starts/pauses playback. (see page 25)
TUNER: *enters Plug & Play mode and/or starts
preset radio station installation (only on the
main unit.) (see page 37)
–
1 STANDBY ON
–
Switches to Eco Power standby mode or turns
on the system. (see page 42)
–
*Switches to standby mode. (see page 42)
Ç STOP
–
–
Exits an operation.
DISC: stops playback or *clears a program.
(see page 25, 27)
TUNER: *erases a preset radio station.
(see page 38)
2 Disc trays 1~5
3 OPEN•CLOSE 0 (DISC1~5)
–
Opens/Closes the individual disc tray.
4 iR SENSOR
Point the remote control towards this sensor.
5 MEDIA SLOT
–
–
S SEARCH T(PREV/NEXT)
DISC: *searches backward/forward or selects a
track. (see page 25)
TUNER: tunes the radio frequency up/down or
selects a preset radio station. (see pages 37-38)
(On the remote, it can only tunes the radio
frequency up/down.)
–
–
–
Plug the memory card into the PC card adaptor
and insert it into the media slot for viewing. (see
page 29)
6 EJECT 0
–
Ejects the memory card from the slot.
–
CLOCK: sets the minutes and hours.
(see pages 20, 39)
7 Speaker display panel
8 System display panel
9 TUNING
@ SEATING (only available in Multi-channel
mode)
–
Turns on/off the seating control diagram on the
TV. Use theVOLUME control on the main unit
or joystick on the remote to select the desired
seating position. (see page 22)
–
Switches between frequency tuning and preset
tuning mode. (see pages 37-38)
0 PROG (PROGRAM)
–
–
DISC: starts programming. (see pages 26-27)
TUNER: starts *automatic/ manual preset
programming. (see page 38)
CLOCK: selects 12- or 24-hour clock display.
(see page 20)
# SURROUND (SURR.)
–
Selects multichannel surround, 3D sound or
stereo mode. (see page 41)
–
$ SOURCE
–
Selects the relevant active mode :TV/AV, DISC,
MEDIA SLOT, TUNER,AUX or DI.
DISC: toggles between DISC and MEDIA SLOT.
TUNER: toggles between FM and AM band.
AUX/DI: toggles between AUX and DI (Digital
Input) mode.
–
–
–
% CLOCK•TIMER
–
*Enters clock or timer setting mode.
(see pages 20, 39)
–
Shows clock display for a few seconds.
(see page 20)
* = Press and hold the button for more than two seconds.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
ª TVVOL +-
^ VOLUME (VOL +-)
Adjusts the volume level.
–
AdjustsTV volume (PhilipsTV only.)
–
(see page 42)
& BASS /TREBLE
º REPEAT A-B
–
Selects bass or treble sound. Use theVOLUME
control to select the desired enhancement level.
(see page 41)
–
Repeats a specific section on a disc. (see page
26)
⁄ ZOOM
* n
Plugging in the headphones jack. The speakers
–
Enlarges a picture on theTV screen.
–
output will be cancelled.
¤ DISC MENU
–
Enters or exits disc contents menu.
(see page 25)
Control buttons available on the
remote only
–
ForVCD version 2.0 only;
In stop mode, turns on/off playback control
(PBC) mode.
( SYSTEM MENU (DVD mode only)
–
Enters or exits system setup menu.
During playback, returns to main menu.
(see pages 30, 31)
‹ SOUND
) Joystick 1234
–
Selects a sound effect. (see page 41)
–
–
Selects movement direction in the menu.
Use 12 to select a preset radio station.
(see page 38)
› Numeric Keypad (0-9)
–
Enters a track/title number of the disc.
–
Enters a number of a preset radio station.
fi B
–
Switches to Eco Power standby mode.
™ DISC SKIP
(see page 42)
–
Selects next disc tray for playback.
–
*Switches to standby mode. (see page 42)
(see page 25)
£ REPEAT
–
Selects various repeat modes. (see page 26)
≤ VOICE (only available in Multi-channel
mode)
–
Turns on/off clear voice sound effect.
(see page 41)
∞ MUTE
–
Mutes or restores the volume. (see page 41)
§ DIM
–
Turns on/off the dim mode. (see page 42)
≥ SLEEP
–
Sets the sleep timer function. (see page 40)
• SUB +-
–
Adjusts subwoofer’s sound level. (see page 41)
* = Press and hold the button for more than two seconds.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 1: Inserting batteries into
the remote control
Step 2: Setting the clock
The clock can be set in either 12-hour or
24-hour mode ("12:00 AM" or "00:00" for
example.)
3
1
buttons on
front panel
DVD system’s
display panel
2
CLOCK•TIMER
SELECT CLOCK OR TIMER
2
CLOCK•TIMER
1 Open the battery compartment.
CLOCK
01:38 PM
13:38
3
4
5
2 Insert two batteries type R06 or AA, following
SEARCH
PROG
the indications (+-) inside the compartment.
3 Close the cover.
CLOCK•TIMER
Using the remote control to operate
the system
6
13:38
1 Aim the remote control directly
OPEN•CLOSE
1 Press STANDBY ON to switch on the DVD
DISC
1
DISC
2
DISC
3
DISC
DISC
DISC
DISC
DISC
1
2
3
4
5
at the remote sensor (iR) on the
front panel.
system.
2 Press and hold CLOCK•TIMER until
STANDBY-ON
iR SENSOR
2 Select the source you wish to
control by pressing one of the
source select buttons on the
remote control (for example
TV/AV,TUNER.)
"SELECT CLOCK OR TIMER" appears.
3 Press T(if necessary) to change the display
to "CLOCK," then press CLOCK•TIMER again
to confirm.
DISC/
MEDIA TUNER AUX/DI
TV/AV
1
4
2
5
8
3
6
4 Press S/ Tto set the minutes and hours.
To increase the speed, hold down S or T.
➜ The changes in minutes will roll over to the
hours.
3 Then select the desired function
7
9
SURR.
SOUND
0
VOL
(for example ÉÅ, S, T.)
SYSTEM MENU
DISC MENU
SEATING
ZOOM
5 Press PROG to change between 12-hour and
OK
STOP
PLAY/PAUSE
24-hour clock mode.
DISC SKIP REPEAT REPEAT PROGRAM
6 Press CLOCK•TIMER again to store the
setting.
CAUTION!
– Remove batteries if they are
exhausted or if the remote is not to be
used for a long time.
– Do not use old and new or different
types of batteries in combination.
➜ The clock will start working.
To view the clock time in any active
mode
G
Press CLOCK•TIMER.
– Batteries contain chemical substances,
so they should be disposed of properly.
➜ The clock will display for a few seconds.
Notes:
– If the DVD system is disconnected from the
power supply, it will erase the clock setting.
– If you do not press any buttons within 90
seconds, the system will exit clock setting mode.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Selecting the color system that
corresponds to yourTV
Step 3: Setting theTV
IMPORTANT!
This DVD system is compatible with both
NTSC and PAL. In order for a DVD to play on
this DVD system, the color system of the DVD,
theTV and the DVD system should match.
Make sure you have completed all the
necessary connections. (See pages 12-13
“ConnectingTV”.)
1 Adjust SOURCE control until “DISC X”
appears on the display panel (or press
DISC/MEDIA on the remote.)
SYSTEM MENU
DISC MENU
1
3
2
SEATING
PREV
ZOOM
,
2 Turn on theTV and set to the correct video-in
channel. You should see the blue Philips DVD
background screen on theTV.
NEXT
SETUP MENU
OK
4
STOP
PLAY/PAUSE
➜ Usually this channel is between the lowest
and highest channels and may be called FRONT,
A/V IN, orVIDEO. See yourTV manual for more
details.
➜ Or, you may go to channel 1 on yourTV, then
press the Channel down button repeatedly until
you see theVideo In channel.
TV Shape
TV System
Video Output
Screen Saver
Auto
NTSC
PAL
Set TV system
➜ Or, theTV remote control may have a button
or switch that chooses different video modes.
➜ Or, set theTV to channel 3 or 4 if you are
using an RF modulator.
1 In disc mode, stop playback and press SYSTEM
MENU.
2 Select
icon and press 4.
3 Use the joystick (1234) on the remote to
Changing the NTSC/PAL setting via
the remote control
navigate in the menu.
Move to
and press 2.
Move to ‘TV System’ and press 2.
DISC/
Auto – Select this if the connectedTV is
compatible with both NTSC and PAL (multi-
system.) The output format will follow the
video signal of the disc.
MEDIA TUNER AUX/DI
TV/AV
1
2
,
1
4
2
5
3
6
NTSC – Select this if the connectedTV is
NTSC system. It will change the video signal of a
PAL disc (VCD only) and output to NTSC
format.
1 Press DISC/MEDIA on the remote to enter
disc mode.
➜ Make sure no MP3 or picture (Kodak, JPEG)
disc is in disc tray 1.
➜ Wait until the system finishes reading the
discs before proceeding to next step.
If playback begins, press Ç to stop playback.
PAL – Select this if the connectedTV is PAL
system. It will change the video signal of an
NTSC disc and output to PAL format.
4 Select an item and press OK.
2 Press and hold DISC/MEDIA on the remote
until “PAL” or “NTSC” appears on the display
panel.
To remove the menu
Press SYSTEM MENU.
➜ To change the setting, repeat step 2.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Changing seating control position
Step 4: Selecting speaker
layout
Normally, the best sound spot and the ideal
setting position is in the middle of the room.
With this ‘SEATING’ feature, it allows you to
select the current seating position in the room
and the speaker setting will automatically adjust
for optimum performance.
SYSTEM MENU
DISC MENU
1
2
3
SEATING
ZOOM
,
PREV
NEXT
SETUP MENU
OK
4
STOP
PLAY/PAUSE
SURR.
SOUND
0
VOL
1
SYSTEM MENU
DISC MENU
Off
Off
Digital Output
Night mode
Analog Output
Speakers
3
4
Multi-channel
SEATING
PREV
ZOOM
Personal settings ...
Square
2
,
NEXT
Speaker Layout
PCM Output
96 kHz
Speaker Layout Settings
1 Press SURR. (or SURROUND on the front
panel) repeatedly to select ‘Multi-channel.’
1 In disc mode, press SYSTEM MENU.
2 Select icon and press 4.
2 Press SEATING.
➜ The seating control diagram which
represents your current speaker layout appears
on theTV screen. To change the speaker layout,
see “Selecting speaker layout.”
3 Use the joystick (1234) on the remote to
navigate in the menu.
Move to
and press 2.
3 Use the joystick (1234) on the remote (or
VOLUME control on the front panel) to select
your current seating position.
Move to ‘Speaker Layout’ and press 2.
➜ During playback, you can hear the changing
of sound effect when you change the seating
position.
➜ If you do not press any buttons within five
seconds, the seating control diagram will exit
from theTV and the system will execute the last
selected seating position.
Personal
4 If you want to remove the seating control
feature, press SEATING twice.
➜ “PERSONAL SETTING” appears and the
system will revert to the personal speaker
settings.
4 Select the layout that most closely resembles
your speakers’ arrangement, then press OK.
➜ The speaker output will adjust automatically
to suit the selected speaker layout settings based
on the seating position in the middle. To change
the seating position, see “Changing seating
control position.”
➜ If you choose ‘Personal,’ the speaker output
will follow the settings in the ‘Speakers‘ menu.
(See next page “Setting the speakers’
channels”.)
To remove the menu
Press SYSTEM MENU.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Setting the speakers’ channels
Step 5: Setting language
preference
You can adjust the delay times (center and
surround only) and volume level for individual
speakers. These adjustments let you optimize
the sound according to your surroundings and
setup. Speaker settings are only active on Multi-
channel audio outputs.
You can select your preferred language settings
so that this DVD system will automatically
switch to the language for you whenever you
load a disc. If the language selected is not
available on the disc, the disc’s default setting
language will be used instead. Except the DVD
system’s menu language, it will remain once
selected.
Digital Output
Night mode
Analog Output
Speakers
Speaker Layout
PCM Output
Personal setting ...
SETUP MENU
Set Speaker
Front L & R
Center
Surr L & R
Sub Woofer
OK to exit
Parental Control
Password
English
Français
Menu Language
Defaults
On
3 ms
3 dB 6 dB
A B
C
Audio Language English
1 Press SURR. (or SURROUND on the front
Subtitle
Disc Menu
English
English
panel) repeatedly to select ‘Multi-channel.’
2 In disc mode, press SYSTEM MENU.
Go to language setup page
3 Select
icon and press 4.
4 Use the joystick (1234) on the remote to
1 In disc mode, stop playback and press SYSTEM
navigate in the menu.
MENU.
Move to
Move to ‘Speakers’ and press 2.
and press 2.
2 Select
icon and press 4.
3 Use the joystick (1234) on the remote to
5 Press 34to select (Front L&R, Center,
Surr L&R, SubWoofer), then press 2to enter
the speaker setting menu.
navigate in the menu.
Move to
and press 2.
➜ The test tone will be automatically
generated.
Move to ‘Menu Language’ and press 2.
4 Select a language and press OK.
6 Use 34to adjust the settings for each
speaker to suit your surround sound needs.
These adjustments may include :
5 Use the joystick (1234) on the remote to
navigate in the menu.
ATurning on or off the sound output.
BDelay time settings - use the longer delay
settings when the surround speakers are
closer to the listener than the front speakers.
CAdjusting the volume levels for one or both
speakers until the sound evens.
Move to
and press 2.
Move to one of the following and press 2.
– ‘Audio Language’ (disc’s soundtrack)
– ‘Subtitle’ (disc’s subtitles)
– ‘Disc Menu’ (disc’s menu)
6 Select a language and press OK.
7 Press OK to confirm.
7 Repeat steps 5~6 for other settings.
To remove the menu
Press SYSTEM MENU.
To remove the menu
Press SYSTEM MENU.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
IMPORTANT!
IMPORTANT!
If the inhibit icon (or X) appears on
– DVD discs and players are designed
with regional restrictions. Before playing
a disc, make sure the disc is for the same
zone as your player.
theTV screen when a button is
pressed, it means the function is not
available on the current disc or at
– Depending on the DVD orVIDEO CD,
some operations may be different or
restricted.
– Do not push on the disc tray or put
any objects other than discs on the disc
tray. Doing so may cause the disc player
to malfunction.
the current time.
Playing discs
1 Adjust SOURCE control until “DISC X”
appears on the display panel (or press
DISC/MEDIA on the remote.)
2 Turn on theTV power and set to the correct
Video In channel. (See page 21 “Setting the
TV”.)
Playable discs
Your DVD home cinema system will
play:
– DigitalVideo Discs (DVDs)
➜ You should see the blue Philips DVD
background screen on theTV.
– Video CDs (VCDs)
3 Press one of the OPEN•CLOSE 0 button to
open the disc tray and load a disc, then press
the same button again to close the disc tray.
➜ Make sure the label side is facing up. For
double-sided discs, load the side you want to
play face up.
– SuperVideo CDs (SVCDs)
– DigitalVideo Discs + Rewritable(DVD+RW)
– Compact Discs (CDs)
– MP3 discs, picture (Kodak, JPEG) files on
CD-R(W).
– JPEG/ISO 9660 format.
– Maximum 30 characters display.
– Supported sampling frequencies : 32 kHz,
44.1 kHz, 48 kHz
– Supported Bit-rates : 32~256 (kbps),
variable bitrates
4 Repeat step 3 for loading a disc onto another
disc tray.
5 Playback will start automatically from the last
loaded disc.
➜ All the available discs will play once, then
stop.
➜ If a disc menu shows on theTV, see next
page on “Using the Disc Menu.”
➜ If the disc is locked by parental control, you
must enter your four-digit password. (See page
35-36.)
G
To obtain the best surround effects, see page 22
Region Codes
“Changing seating control position.”
DVDs must be labeled for ALL regions
or for Region 1 in order to play on
this DVD system. You cannot play discs
that are labeled for other regions.
ALL
Note:
– Only one tray can be opened at a time. If you
intend to open the second tray before closing the
first tray, the first tray will automatically close
before the second tray opens.
1
Note:
– If you are having trouble playing a certain disc,
remove the disc and try a different one.
Improperly formatted discs will not play on this
DVD system.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
Turning on/off auto Eco standby mode
Basic playback controls
This is a power-saving feature, the system will
automatically switch to Eco standby mode if you
do not press any buttons within 30 minutes
after a disc has stopped playing.
Pausing playback
Press ÉÅ.
➜ To resume normal playback, press ÉÅ
again.
G
buttons on
front panel
DVD system’s
display panel
Selecting another track/chapter
Press S/ Tor use the numeric
keypad (0-9) to key in a track/chapter number.
G
G
STANDBY-ON
13:38
1
2
STOP
Searching backward/forward
Press and hold S/ T, then press ÉÅ to
resume normal playback.
➜ While searching, pressing and holding
S/ Tagain will increase the search speed.
AUTO ECO ON
1 Press and hold STANDBY ON to switch the
system to standby mode.
➜ The clock appears.
Selecting next disc
Press DISC SKIP.
➜ The selected disc will play once, then stop.
2 Press and hold Ç until “AUTO ECO ON”
G
G
appears.
➜ To turn off the setting, repeat step 2 until
“AUTO ECO OFF” appears.
Stopping playback
Press Ç.
Using the Disc Menu
Resuming playback from the last
stopped point (DVD/VCD)
Depending on the disc, a menu may appear on
theTV screen once you load in the disc.
G
G
In stop mode and when the disc has not been
ejected, press ÉÅ.
To select a playback feature or item
G
Use the joystick (1234) or numeric
keypad (0-9) on the remote, then press ÉÅ
or OK to start playback.
To cancel the resume mode
In stop mode, press Ç again.
To access or remove the menu
Press DISC MENU on the remote.
Notes:
G
G
– Opening the current disc tray or selecting
another disc tray will cancel the resume feature.
– Resume option may not be available on some
discs.
ForVCD with Playback Control (PBC)
feature (version 2.0 only)
In stop mode, press DISC MENU to toggle
between ‘PBC ON’ and ‘PBC OFF’, then the
playback will start automatically.
➜ If you select ‘PBC ON’, the disc menu (if
available) will appear on theTV. Use the Joystick
(1234) to highlight your selection and press
OK to confirm or use the numeric keypad (0-9)
to select a play option.
Replacing discs without interrupting
playback
G
Press OPEN•CLOSE 0 buttons of the
inactive disc trays.
For example, if currently disc tray 1 is playing,
you can replace the discs on disc trays 2~5.
G
During playback, pressing DISC MENU will
return to the menu screen (if PBC is on).
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
Program favorite tracks (audio
CDs andVCDs)
Selecting various repeat
functions
You can play the contents of the disc in the
order you want by programming the order of
the tracks to be played. Up to 99 tracks can be
stored.
Repeat play mode
G
While playing a disc, press REPEAT to select :
REPEAT CHAPTER (DVD)
– to repeat playback of the current chapter.
DISC/
TV/AV MEDIA
REPEAT ALBUM (MP3)
TUNER AUX/DI
– to repeat playback of the current album.
1
4
2
5
8
0
3
6
REPEATTRACK/TITLE
– to repeat playback of the current track/title.
4
5
,
7
9
SURR.
SOUND
REPEAT DISC (CD/VCD/SVCD)
– to repeat playback of the current disc or the
programmed tracks (if the program mode is
active.)
VOL
SYSTEM MENU
DISC MENU
SEATING
PREV
ZOOM
REPEAT ALL (CD/VCD/SVCD)
– to repeat playback of all available discs or the
programmed tracks.
6
4
NEXT
OK
5
8
3
STOP
PLAY/PAUSE
2
9
1
,
DISC SKIP REPEAT REPEAT PROGRAM
A-B
REPEAT OFF
VOICE
MUTE
– to cancel the repeat mode.
1 Press DISC SKIP repeatedly to select a disc
tray containing audio CD orVCD.
Notes:
– Repeat play might not work correctly with some
DVDs.
– For VCD, if the PBC mode is switched on, repeat
play is not possible.
➜ Wait until the system finishes reading the
discs before proceeding to next step.
2 When the playback begins, press Ç to stop
playback.
3 Press PROGRAM to enter program mode.
➜ "PROGRAM FULL" appears if you have
already programmed 99 tracks.
Repeating a section within a chapter/
track
1 While playing a disc, press REPEAT A-B at the
starting point.
2 Press REPEAT A-B again at the point to end
the section.
PROG XX
➜ The section A and B can be set only within
the same chapter/track.
“XX” = number of programmed tracks
➜ The section will now repeat continuously.
3 Press REPEATA-B again to resume normal
playback.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
4 Press S, then use the numeric keypad
(0-9) to enter the disc number.
➜ "DISC X" appears.
Using the menu bar to program
IMPORTANT!
You have to turn on yourTV and set to
the correctVideo In channel. (See page 21
“Setting theTV”.)
5 Press T, then use the numeric keypad
(0-9) to enter the track number.
➜ "TRACK X" appears.
6 Press OK to store the track.
SYSTEM MENU
DISC MENU
1
3
7 Repeat steps 4~6 to select other discs and
2
SEATING
PREV
ZOOM
tracks.
,
NEXT
8 Press ÉÅ to start program playback.
➜ Only the tracks programmed from audio
CDs andVCDs will play.
OK
4
STOP
PLAY/PAUSE
DISC SKIP REPEAT REPEAT PROGRAM
PROGRAM
DISC
TRACK
9 Press Ç to stop playback or exit program
mode.
1
2
3
4
5
6
Notes:
– Pressing OPEN•CLOSE button of the
programmed disc tray will erase the program.
– If you do not press any buttons within 20
seconds, the system will exit programming mode.
1 Stop playback, then press SYSTEM MENU.
➜ The menu bar will appear across the top of
theTV screen.
Clearing the program
G
Stop playback, then press and hold Ç.
➜ PROG disappears from the display panel and
"PROGRAM CLEARED" appears.
2 Use the joystick (12) to select
and press 4
to enter the program menu.
3 Use the joystick (1234) to move within the
program menu and use the numeric keypad
(0-9) to enter the disc and track number to
program.
Note:
– If the DVD system is disconnected from the
power supply, the program will be erased.
4 Press ÉÅ to start program playback.
➜ Only the tracks programmed from audio
CDs andVCDs will play.
G
In stop mode, you can press PROG on the
front panel to toggle between program on and
off.
To clear the program
G
Stop playback, then press and hold Ç.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
In stop mode, you can;
Playing MP3/Picture disc (Kodak,
JPEG)
G
G
Use the joystick (1234) on the remote to
move within the menu and press OK to select
the desired file to play.
IMPORTANT!
You have to turn on yourTV and set to
the correctVideo In channel. (See page 21
“Setting theTV”.)
In picture menu, you can use the joystick
(1234) to select S or T in the menu
to view the previous/next page (if available.)
1 Load an MP3/Picture (Kodak, JPEG) disc.
➜ The disc reading time may exceed 30
seconds due to the complexity of the directory/
file configuration.
Notes:
– Due to the recording nature of Digital Audio
MP3 (DAM), only digital audio music will play.
– It is normal to experience an occasional “skip”
while listening to your MP3 discs.
– Some files on Kodak or JPEG discs may be
distorted during playback due to the configuration
and characteristics of the disc.
2 Playback will start automatically.
➜ For picture discs, 9 thumbnail pictures will
appear on theTV. Press ÉÅ to start
slide-show playback.
➜ For MP3 discs, a list of albums/titles menu will
appear on theTV.
Program MP3 disc
(example for MP3 disc menu)
SYSTEM MENU
DISC MENU
Title : Title Name 1
Artist : Unknown
1
2
3
3
6
SEATING
PREV
ZOOM
...
,
Root
MP3
MP3
MP3
MP3
MP3
"Title Name 1"
"Title Name 2"
"Title Name 3"
"Title Name 4"
"Title Name 5"
14
15
16
17
18
BIG HITS
NEXT
OK
FAT POP HI
HOT RELEA
M. TV MUSIC
NOW THAT
STOP
PLAY/PAUSE
5
PROGRAM
DISC SKIP REPEAT REPEAT PROGRAM
PROGRAM P 00 : 0000
1 Stop playback, then press SYSTEM MENU.
➜ The menu bar will appear across the top of
theTV screen.
(example for 9 thumbnail pictures display)
A
D
G
B
E
C
F
I
2 Use the joystick (12) to select
and press 4
to enter the program menu.
3 Use the numeric keypad (0-9) or joystick
(1234) to select the title number and press
OK.
H
During playback, you can;
4 Repeat step 3 to select title number.
G
G
G
Press S / T to select another title/picture
in the current folder.
5 Press Ç to stop the programming.
➜ A list of programmed tracks appears.
Use the joystick (1234) on the remote to
6 Press ÉÅto start program playback.
rotate/flip the picture files.
G
In stop mode, you can press PROG to toggle
Press ÉÅ to pause/resume playback.
between program on and off.
3 To stop playback, press Ç.
To clear the program
G
Stop playback, then press and hold Ç.
Note:
– Repeat function is not possible during MP3
program playback.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Slot Operations
About media slot
Playing JPEG pictures from
memory card
The MEDIA SLOT allows you to playback the
contents (for example, digital still pictures)
stored in the memory card (PCMCIA) without
the need of using the device itself (for example,
digital camera, digital camcorder, MP player) or a
computer.
1 Remove the memory card from your digital
camera and plug it into the PC card adaptor
(not supplied.)
2 Insert the PC card adaptor into the media slot
on your player.
Memory cards (for example, Compact Flash,
Memory Stick, Smart Media, Secure Digital card,
Multimedia card) are a new form of compact,
portable, digital data exchange or storage
systems with compatible memory card devices
and versatile IC (Intergrated Circuit) recording
medium with a data capacity that exceeds a
floppy disc.
3 Adjust SOURCE control until “MEDIA SLOT”
appears on the display panel (or press
DISC/MEDIA twice on the remote.)
4 Turn on theTV power and set to the correct
Video In channel. (See page 21 “Setting theTV”.)
➜ If the memory card is recognized, 9
thumbnail pictures will appear on theTV.
5 You can also use the joystick (1234) to make
your selection from the 9 thumbnail pictures. If
you press OK, the selected picture will show on
theTV screen. If you press ÉÅ, the slide-show
playback will begin from the selected picture.
Precaution on handling the memory
card
– Do not attach any other material than the
supplied label on the label space.
– Do not touch the memory card connector
with fingers or metal objects.
During playback, you can;
– Do not bend, drop, disassemble or modify
the memory card.
G
G
Press S / T to select another picture.
Use the joystick (1234) on the remote to
rotate/flip the picture files.
– Do not allow the memory card to get wet.
– If you use a memory card that has been
initialized using a computer or if you initialize a
memory card attached to a camera using a USB
connection, further operation is not guaranteed.
– An image file that has been modified using an
image processing software may not open if it is
converted into a different file format.
G
Press ÉÅ to pause/resume playback.
6 To stop playback, press Ç.
7 To eject the memory card, press EJECT 0.
In stop mode, you can;
G
Use the joystick (1234) to select S or
T in the menu to view the previous/next
page (if available.)
Supported memory card format
File format: JPEG image (*.jpg.)
Compatibility:
Notes:
– *.jpg images recorded with a digital
camcorder or digital camera with memory
card function.
– Some files on memory cards may be distorted
when played back.
– If you insert the PC card adaptor into the media
slot while watching a DVD playback, the picture/
sound from the disc may freeze/skip due to
electrical interference.
– JPEG images stored in a memory card using
a memory card adaptor for PC.
– MP3 files.
Directories:
– Memory card
– Picture CD
29
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Options
SUBTITLE
Select a subtitle language available on the DVD.
Using the menu bar
You can continue a number of operations
directly via the multiple menu bars on theTV
screen without interrupting the disc playback.
AUDIO
DVD : Select an audio soundtrack language available
on the DVD.
VCD : Select audio channels : LEFT VOCAL,
RIGHT VOCAL, MONO LEFT,
MONO RIGHT or STEREO.
The exception is when you enter
MENU,) the playback will pause.
(SETUP
SLOW MOTION
Select a slow playback speed. The volume will be
muted. To resume normal playback, press ÉÅ.
DVD : SF x2, SF x4, SF x8, SR x2, SR x4, SR x8.
VCD : SF x1, SF x2, SF x3.
SYSTEM MENU
DISC MENU
1
2
SEATING
PREV
ZOOM
(SF=Slow Forward, SR=Slow Rerverse)
NEXT
FAST REVERSE
DVD : FR x2, FR x4, FR x6, FR x8.
VCD/MP3 : FR x1, FR x2, FR x3, FR x4.
OK
3
STOP
PLAY/PAUSE
FAST FORWARD
DVD : FF x2, FF x4, FF x6, FF x8
VCD/MP3 : FF x1, FF x2, FF x3, FF x4.
1 In disc mode, press SYSTEM MENU.
➜ The menu bar will appear across the top of
theTV screen.
Select a search speed (backward/forward). The volume
will be muted. To resume normal playback,
press ÉÅ.
STATUS
Allows viewing of the current status of the disc
The information will vary depend on the disc
format.
.
Available on DVD only
TITLE SEARCH (TITLE XX:YY")
Select a Title for playback to begin.
CHAPTER SEARCH (CHAPTER XX:YY)
Select a Chapter for playback to begin.
2 Use the joystick (1234) on the remote to
navigate in the menu.
"XX" - current title/chapter number.
"YY" - total number of title/chapter.
➜ Press 12to move through the menu bar.
➜ Press 4to enter the selection. If there are
multiple choices available, press 4repeatedly to
select.
Use the numeric keypad (0-9) to change the
"XX" number, then press OK.
TIME SEARCH (TIME __:__:__)
Use the numeric keypad (0-9) to enter the
time (hours, minutes and seconds) at which you want
playback to begin.
3 Press OK to confirm the selection.
➜ Playback will resume or begin automatically.
ZOOM
Select an enlarge picture ratio : x1.5, x2.0, x3.0,
then press OK to confirm. Use the joystick to
move within the enlarged picture on the TV.
To resume normal playback, select 'ZOOM OFF'
from the menu.
To remove the menu
Press SYSTEM MENU.
ANGLE (for DVD only)
Select to view the same scene from different angles
if the DVD is recorded with multiple angles.
IMPORTANT!
– Some operations may be different or
restricted, depending on the disc format.
Refer to the jacket or case of the disc
you are playing.
STEP FORWARD
Select to advance the still picture one frame
forward. To resume normal playback, press ÉÅ.
– Changing the Subtitle Language and
Audio Language from the menu bar will
only apply to the current disc, it will not
change the default preset.
PBC ON/OFF (for VCD 2.0 with PBC feature)
Select between PBC On and Off.
'PBC OFF' - the playback will start automatically.
'PBC ON' - the disc menu (if available) will appear
on the TV. Use the numeric keypad (0-9) to
enter your choice.
PROGRAM
Stop playback, then select this to enter the program
menu (see page 27 "Using the menu bar to program".)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Options
Setting theTV shape
Using the Setup Menu
The format you select must be available on the
disc. If it is not, the setting forTV Shape will not
affect the picture during playback.
This DVD setup is carried out via theTV,
enabling you to customize the DVD system to
suit your particular requirements.
Follow the steps of “Using the Setup Menu” and
SYSTEM MENU
DISC MENU
select :
1
3
2
> TV Shape
SEATING
PREV
ZOOM
,
NEXT
OK
4
STOP
PLAY/PAUSE
TV Shape
TV System
4:3 panscan
4:3 letterbox
16:9
Video Output
Screen saver
1 In disc mode, press SYSTEM MENU.
➜ Playback will pause.
Set TV shape mode
2 Select
icon and press 4to enter the
setup menu. Then press 34to select one of
the setup menu options and press 2to
enter the menu.
4:3 panscan
Select this if you have a
conventionalTV and your
DVD is not formatted for
wide screen viewing. A wide picture will display
on the wholeTV screen with a portion
automatically cut off.
SETUP MENU
Picture Setup
Sound Setup
4:3 letterbox
Select this if you have a
conventionalTV and your
DVD is formatted for wide
screen viewing. Black bars
appear on the upper and lower portions of the
TV screen.
Language Setup
Feature Setup
3 Use the joystick (1234) on the remote to
navigate in the menu.
16:9
4 Press OK to confirm your selection.
Select this if you have a
wide screenTV (you must
also set your wide screen
TV to “full size”.)
➜ Playback will resume or begin automatically.
To remove the menu
Press SYSTEM MENU.
NOTE:
Some of the features in the Setup Menu
are described in “Getting Started.”
31
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Options
Setting the video output
Setting the analog output
Set theVideo Output according to your video
connection.
Set Analog Output to match your DVD home
cinema system’s playback capability. This function
can also be accessed via the SURR. button on
the remote control (or SURROUND on the
front panel.)
Stop playback, then follow the steps of “Using
the Setup Menu” and select :
> Video Output
Follow the steps of “Using the Setup Menu” and
select :
TV Shape
TV System
> Analog Output
Video Output
Screen saver
S-Video
Scart / Pr Pb Y
Digital Output
Night mode
Set Video Output
Analog Output
Speakers
Stereo
3D Sound
Multi-channel
Speaker Layout
PCM Output
S-Video
Set Analog Output
Select this if you have connected the DVD
system to yourTV using the S-Video jack.
Stereo
Scart / Pr Pb Y
Select this to change channel output to stereo
which delivers sound from only the two front
speakers and subwoofer.
Select this if you have connected the DVD
system to yourTV using component video jacks.
(SCART - this feature is not available for this
model.)
3D Sound
Select this to change channel output to 3D
sound which delivers surround sound from only
the two front speakers and subwoofer.
Note:
– You do not need to adjust the video output
setting if you are using CVBS jack (yellow) to
connect the DVD system to yourTV.
Multi-channel
Select this to enable Multi-channel output.
Once you select ‘Multi-channel’, the digital
output of this DVD system will automatically
change to ‘ALL’ (see next page).
Screen Saver - turning on/off
Follow the steps of “Using the Setup Menu” and
select :
> Screen saver
TV Shape
TV System
Video Output
Screen Saver
Off
On
Screen Saver On or Off
Off
Select this to disable the screen saver function.
On
Select this if you wish to dim theTV screen
when disc playback is stopped or paused for
more than five minutes. It is to prevent your
display device from becoming damaged.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Options
Setting the digital output
Setting the PCM output
Set Digital Output according to your optional
audio equipment connections.
Set your PCM (Pulse Code Modulation) output
only after you have set the system’s Digital
Output to ‘PCM only.’ (See “Setting the digital
output”.)
Follow the steps of “Using the Setup Menu” and
select :
Follow the steps of “Using the Setup Menu” and
select :
> Digital Output
> PCM Output
Digital Output
Night mode
Off
All
PCM only
Analog Output
Speakers
Digital Output
Night mode
Analog Output
Speakers
Speaker Layout
PCM Output
Set Digital Output
Speaker Layout
48 kHz
96 kHz
PCM Output
Set PCM output to 48K or 96K
Off
Select this to deactivate the digital output.
48 kHz
All
Select this if the optional audio equipment is
incapable of processing 96 kHz digital signal
input. The signal will then be converted to a
standard signal with sampling rates of 48 kHz.
Select this if you have connected the digital
output to an optional piece of audio equipment
that has a multichannel decoder.
PCM only
96 kHz
Select this if the optional audio equipment is not
capable of decoding multichannel audio. After
that, proceed to “Setting the PCM output.”
Once you select ‘PCM only’, the surround mode
will automatically change to ‘STEREO’.
Select this if the optional audio equipment is
capable of processing digital signal input with
sampling rates of 96 kHz. However, if the sound
output is distorted or there is no sound, select
‘48 kHz’ instead.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Options
Night mode - turning on/off
Restoring to original settings
Follow the steps of “Using the Setup Menu” and
Follow the steps of “Using the Setup Menu” and
select :
select :
> Defaults
> Night Mode
Parental Control
Password
Digital Output
Night mode
Analog Output
Speakers
Off
On
Menu Language
Defaults
Reset
Speaker Layout
PCM Output
Load factory settings
Set Night mode
Off
Reset
Select this when you want to enjoy the
surround sound with its full dynamic range.
Pressing 2on the remote will restore all the
items in the setup menu to the original factory
setting except for your Parental Control
password.
On
Select this to level out the volume. High volume
outputs will be softened and low volume
outputs are brought upward to an audible level.
This feature is only available for movies with
Dolby Digital mode.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Options
4 Use the numeric keypad (0-9) to enter
‘1234’ (default password) when you are asked to
enter the four-digit password. You will have to
enter the same code, exactly, twice.
Restricting playback by Parental
Control
(only available in region 1 players)
Some DVDs may have a parental level assigned
to the complete disc or to certain scenes on the
disc. This feature lets you set a playback
limitation level. The rating levels are from 1 to 8
and are country dependent. You can prohibit
the playing of certain discs that are not suitable
for your children or have certain discs played
with alternative scenes.
➜ To change the password, see page 36
“Changing the password.”
5 Select a rating level and press OK.
➜ DVDs that are rated above the level you
selected will not play unless you enter your four-
digit password and choose a higher level rating.
To disable Parental Controls and have all discs
play, choose ‘NO PARENTAL.’
DISC/
MEDIA
TUNER AUX/DI
TV/AV
Parental Control
Password
Menu Language
1
4
2
5
8
0
3
6
Defaults
4
7
9
SURR.
SOUND
Set Parental control
VOL
SYSTEM MENU
DISC MENU
6 Press SYSTEM MENU again to remove the
1
2
6
3
,
,
menu.
SEATING
PREV
ZOOM
NEXT
Rating explanations
OK
5
SETUP MENU
STOP
PLAY/PAUSE
NO PARENTAL – It will play all discs.
8 ADULT – Mature material; should be viewed
only by adults due to graphic sexual
material, violence, or language.
__ __ __ __
Enter code
Parental Control
Password
7 NC-17
–
No children under age 17; not
recommended viewing for children
under age 17.
Menu Language
Defaults
6 PG-R
–
Parental Guidance - Restricted;
recommended that parents restrict
children under 17 from viewing or allow
to view only when supervised by a
parent or adult guardian.
Set Parental control
1 In disc mode, press SYSTEM MENU.
2 Select icon and press 4.
4 PG13
–
Material is unsuitable for children under
age 13.
Parental Guidance suggested.
General Audience; recommended as
acceptable for viewers of all ages.
3 PG
1 G
–
–
3 Use the joystick (1234) on the remote to
navigate in the menu.
Move to
and press 2.
Note:
– Some DVDs are not encoded with a rating
though the movie rating may be printed on the disc
jacket. The rating level feature does not work for
such discs.
Move to ‘Parental Control’ and press 2.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Menu Options
4 Use the numeric keypad (0-9) to enter your
original four-digit password at “Enter code.”
➜ If you are asked to enter the code for the
first time, key in ‘1234.’
Changing the password
You can change the four-digit password used for
Parental Control. The default password is ‘1234.’
➜ If you forget your password, press Ç four
times to restore to the default password
(1234.)
DISC/
MEDIA
TUNER AUX/DI
TV/AV
5 Enter your new four-digit password.
1
4
2
5
8
0
3
6
6
4
5
,
,
7
9
Parental Control
SURR.
SOUND
Password
Menu Language
Defaults
__ __ __ __
Enter code
VOL
SYSTEM MENU
DISC MENU
1
2
7
3
,
SEATING
PREV
ZOOM
,
Please enter new password
NEXT
OK
SETUP MENU
STOP
PLAY/PAUSE
6 Enter the same new four-digit password again.
Parental Control
Parental Control
Password
Menu Language
Change
Password
Menu Language
Defaults
__ __ __ __
Enter code
Defaults
Change password
Please reenter new password
1 In disc mode, press SYSTEM MENU.
2 Select icon and press 4.
7 Press SYSTEM MENU again to remove the
menu.
3 Use the joystick (1234) on the remote to
navigate in the menu.
Move to
and press 2.
Move to ‘Password’ and press 2.
Parental Control
Password
Menu Language
__ __ __ __
Enter code
Defaults
Please enter old password
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Operations
IMPORTANT!
– Make sure the FM and AM antennas
are connected.
Presetting radio stations
You can store up to 40 preset radio stations in
the memory, starting from FM and followed by
AM bands.
– TheTUNING button on the front
panel is used to toggle between
frequency tuning and preset tuning.
When in preset tuning mode, pressing
S / T buttons on the front panel
will change the preset number.
Otherwise, pressing S / T will
change the radio frequency.
Notes:
– The system will exit presetting mode if no
button is pressed within 20 seconds.
– If no stereo frequency is detected during Plug
and Play, "CHECK ANTENNA" appears.
Using the Plug and Play
Tuning to radio stations
Plug and Play allows you to store all available
radio stations automatically.
1 Press TUNER on the remote (or adjust
SOURCE control on front panel) to select
“FM TUNER” or“AM TUNER.”
PLAY•PAUSE
2 Press and hold S / T on the remote until
the frequency indication starts to change, then
release.
AUTO INSTALL - PRESS PLAY
DVD VIDEO DIGITAL SURROUND SYSTEM
➜ The next radio station will tune automatically.
TREBL
PLAY•PAUSE STOP
SEATING SOURCE
SURROUND
VOLUME
➜
lights up for FM stereo reception.
DVD
SEARCH
PROG
TUNING CLOCK•TIMER
SC CHANGER
3 To tune a weak station, press S / T briefly
and repeatedly until an optimal reception is
found.
BASS
EJECT
MEDIA SLOT
1 Connect the system to the power supply,
"AUTO INSTALL - PRESS PLAY" appears.
OR
G
If you use S / T on the front panel for
frequency tuning, make sure the system is in
frequency tuning mode. If not, press TUNING.
➜ "FREQ MODE" appears.
In Eco Power standby/standby mode,
press and hold ÉÅon the front panel until
"AUTO INSTALL - PRESS PLAY" appears.
2 Press ÉÅon the front panel to start
installation.
➜ "INSTALL TUNER" appears.
➜ All previously stored radio stations will be
replaced.
➜ Once completed, the last tuned radio station
will play.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Operations
Automatic presetting
Manual presetting
You can start the automatic presetting from a
selected preset number.
You can choose to store only your favorite radio
stations.
1 In tuner mode, press PROGRAM (or PROG
DVD system’s
display panel
on the front panel.)
DISC/
MEDIA
2 Press 1 2or use the numeric keypad (0-9)
TUNER AUX/DI
TV/AV
1
2
FM TUNER
to select a preset number.
1
4
2
5
8
0
3
6
3 Press S / T on the remote to select a
7
9
radio station.
SURR.
SOUND
VOL
P01
4 Press PROGRAM again to store.
FM 98:00
SYSTEM MENU
DISC MENU
SEATING
PREV
ZOOM
Selecting a preset radio station
NEXT
OK
STOP
PLAY/PAUSE
G
Press 1 2or use the numeric keypad (0-9)
to select a preset number.
➜ The preset number, radio frequency, and
waveband will appear.
DISC SKIP REPEAT REPEAT PROGRAM
AUTO
A-B
3
VOICE
DIM
MUTE
PROGRAM
SLEEP SUBW TV VOL
1 Press TUNER on the remote (or adjust
SOURCE control on front panel) to select
“FM TUNER” or “AM TUNER.”
Deleting a preset radio station
G
Press and hold Ç until “PRESET DELETED”
appears.
➜ The current preset radio station will be
deleted and the next available preset radio
station will take its place.
2 Press 1 2or use the numeric keypad (0-9)
to select a preset number to begin.
G
If you use S / T on the front panel for
preset tuning, make sure the system is in preset
tuning mode. If not, press TUNING.
➜ "PRESET MODE" appears.
➜ All other preset radio stations with higher
numbers will decrease by one.
3 Press and hold PROGRAM (or PROG on the
front panel) until "AUTO PROGRAM" appears.
➜ If a radio station is stored in one of the
presets, the same radio station will not store
under another preset number.
➜ If no preset number is selected, automatic
preset will begin from preset (1) and all your
former presets will be overridden.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Operations
6 Press CLOCK•TIMER again to store the
setting.
Setting the timer
The system can switch on to DISC orTUNER
mode automatically at a preset time, serving as
an alarm to wake you up.
➜ Once the timer is set, it will always switch on
unless you deactivate it.
➜
icon will remain on the display panel. It
indicates the timer is activated.
IMPORTANT!
– Before setting the timer, ensure that
the clock is set correctly.
– The volume of the timer will increase
gradually to the last tuned volume level.
If the last tuned volume level is too low,
the set will then increase to a
G
At the preset time, the selected sound
source will play for 30 minutes before it
switches to Eco Power standby mode (if
no button is being pressed within the time
frame.)
➜ DISC – playing the first track of the last
selected disc. If the last selected disc tray is
empty, it will switch to the next available disc. If
all the disc trays are not available, it will switch
toTuner mode.
predetermined minimum audible level.
buttons on
front panel
DVD system’s
display panel
CLOCK•TIMER
➜ TUNER – playing the last tuned radio
station.
SELECT CLOCK OR TIMER
2
CLOCK•TIMER
TIMER
3
4
5
Activating/Deactivating the timer
SOURCE
12:00AM
TUNER
1 Repeat steps 1~3 of “Setting the timer.”
2 Press Ç to turn off the timer.
SEARCH
12:00AM
DISC
➜
icon will disappear from the display panel
and "TIMER OFF" appears.
CLOCK•TIMER
10:38AM
DISC
OR
6
Press CLOCK•TIMER to turn on the timer to
the last setting.
➜ The timer information will display for a few
seconds, then the system resumes its last active
source or stays in standby mode.
1 Press STANDBY ON to switch on the DVD
system.
2 Press and hold CLOCK•TIMER until "SELECT
CLOCK OR TIMER" appears.
Note:
3 Press T(if necessary) to change the display
to "TIMER," then press CLOCK•TIMER again
to confirm.
– The system will exit timer setting mode if no
button is pressed within 90 seconds.
4 Adjust SOURCE (or press DISC/MEDIA or
TUNER on the remote) to select the wake up
source (DISC orTUNER.)
5 Press S/ Tto set the wake up time
(minutes and hours.)
To increase the speed, hold down S or T.
➜ The changes in minutes will roll over to the
hours.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Operations
Setting the Sleep timer
The sleep timer enables the system to switch to
Eco Power standby mode automatically at a
preset time.
G
Press SLEEP on the remote repeatedly until it
reaches the desired preset turn-off time.
➜ The selections are as follows (time in
minutes):
15™ 30™ 45™ 60™ 90™ 120™
OFF™ 15…
➜ SLEEP will show on the display panel, except
if "OFF" is selected.
➜ Before the system switches to Eco Power
standby mode, a countdown of 10 seconds is
displayed.
"SLEEP 10" ™ "SLEEP 9".... ™
"SLEEP 1" ™ "SLEEP"
To check or change the setting
Press SLEEP once to show the remaining time
before switching off. If you continue pressing
the SLEEP button, the next SleepTimer option
will appear on the display panel.
G
G
To cancel the sleep timer
Press SLEEP repeatedly until "OFF" appears or
press the STANDBY ON button.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound andVolume Controls
Adjusting Bass/Treble level
Sound Control
The BASS (low tone) andTREBLE (high tone)
features enable you to define the sound-
processor settings.
IMPORTANT!
For proper surround sound, make sure
the speakers and subwoofer are
connected (see page 14.)
1 Press BASS or TREBLE.
➜ The level indicator appears.
Selecting surround sound
2 Within five seconds, use the VOLUME control
to adjust the Bass orTreble level (-3 to +3.)
➜ If the volume control is not used within five
seconds, it will resume its normal volume
control function.
G
Press SURROUND (SURR.) to select :
MULTI-channel, 3D SOUND or STEREO.
➜ The availability of the various surround sound
modes depends on the number of speakers used
and the sound available on the disc.
➜ The center and surround speakers operate
only when the DVD home cinema system is set
to Multi-channel mode.
➜ The available output modes for Multi-channel
include: Dolby Digital, DTS (DigitalTheater
Systems) Surround, Dolby Surround and Dolby
Pro Logic.
Selecting digital sound effects
Select a preset digital sound effects that matches
your disc’s content or that optimizes the sound
of the musical style you are playing.
G
Press SOUND on the remote.
➜ Stereo broadcasts or recordings will produce
some surround channel effects when played in a
surround mode. However, monaural (single
channel sound) sources will not produce any
sound from the surround speakers.
When playing movie discs, you can select :
CONCERT, DRAMA,ACTION or SCI-FI.
When playing music discs or while inTUNER or
AUX/DI mode, you can select : ROCK,
DIGITAL, CLASSIC or JAZZ.
Note:
– You are not able to select the surround sound
mode if the system menu/menu bar is turned on.
Volume control
G
Adjust VOLUME control (or press
VOL +/-on the remote) to increase or
decrease the volume level.
➜ "VOL MIN" is the minimum volume level and
“VOL MAX” is the maximum volume level.
Turning on/off clear voice effect
You can enhance the center and surround sound
outputs by activating the clear voice sound
feature if you have selected Multi-channel as the
surround mode.
To listen through the headphones
Connect the headphones plug to the n socket
at the front of the DVD system.
G
Press VOICE on the remote to select “CLEAR
VOICE ON.”
➜ To turn off the setting, pressVOICE again to
select “CLEAR VOICE OFF.”
G
G
➜ The speakers will be muted.
To turn off the volume temporarily
Press MUTE on the remote.
Changing subwoofer volume level
➜ Playback will continue without sound and
"MUTE" appears.
➜ To restore the volume, press MUTE again or
increase the volume level.
G
Press SUB +/- on the remote to adjust
subwoofer volume level (-6dB to + 6dB.)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Functions
Switching on/off
Recording to an external device
1 Connect the external recording device to
LINE OUT or DIGITAL OUT.
Switching to active mode
G
Adjust the SOURCE control to select :
DISC 1....DISC 5 ™ FMTUNER ™
AMTUNER ™ TV/AV ™ AUX ™ DI ™
MEDIA SLOT ™ DISC 1....
OR
(See pages 16, 17 “Connections-optional“.)
2 Select the source to record from your DVD
system (DISC/MEDIA SLOT,TUNER,TV/AV or
AUX/DI) and start playback (if necessary.)
➜ You can only record from DISC if using
DIGITAL OUT to connect the external
recording device.
Press DISC/MEDIA, TUNER, TV/AV or
AUX/DI on the remote.
3 Start recording on the external recording
Switching to Eco Power standby mode
device.
G
Press STANDBY ON (B).
➜ ECO POWER button lights up.
➜ The display screen will go blank.
Notes:
– All the sound control features are available for
selection.
– Refer to the owner’s manual of the connected
equipment for details.
Switching to standby mode (view
clock)
G
Press and hold STANDBY ON (B).
➜ The clock appears.
➜ While in standby mode, pressing
CLOCK•TIMER button will switch the system to
Eco Power standby mode.
Using the remote to operate
your television
DISC/
MEDIA TUNER AUX/DI
4
TV/AV
1
2
1
4
2
5
8
3
6
7
9
Dimming system’s display screen
SURR.
SOUND
0
VOL
SYSTEM MENU
DISC MENU
G
Press DIM repeatedly to select different levels
of brightness for the display screen.
SEATING
PREV
ZOOM
NEXT
OK
STOP
PLAY/PAUSE
DISC SKIP REPEAT REPEAT PROGRAM
A-B
VOICE
DIM
MUTE
SLEEP SUBW TV VOL
3
1 Press TV/AV.
2 Press S / T or use the numeric
keypad (0-9) to select theTV’s channel.
3 Press TVVOL +/- to adjust theTV’s volume
level.
4 Press B to turn off yourTV.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
AMPLIFIER SECTION
Output power
- Stereo mode (DIN)
MAIN UNIT
600 WTotal power
Power Supply Rating
Power Consumption
Dimensions (w x h x d)
120V / 60 Hz
155 W
435 mm x 100 mm x 360 mm
17.13 x 3.94 x 14.17 (inch)
7.15 kg / 15.73 pounds
100 W + 100 W RMS /
1
2 x 80 W FTC
- Surround mode (1 kHz) 100 W RMS/channel
Frequency Response
Signal-to-Noise Ratio
Input Sensitivity
- AUX In
100 Hz – 20 kHz / –3 dB
> 65 dB (CCIR)
Weight
SPEAKERS
Front speakers / Rear (surround) speaker
System
880 mV
350 mV
-TV In
triple driver
Output Sensitivity
- Headphone
- Line Out
Impedance
8 Ω
32 Ω – 1000 Ω
Speaker drivers
Frequency response
Dimensions (w x h x d)
2 x 3” woofer, 1 3/4” tweeter
120 Hz – 20 kHz
94 mm x 280 mm x 70 mm
3.70 x 11.02 x 2.76 (inch)
1.23 kg/each
600 mV
- Digital In
acc IEC 60958 & IEC 61937
1
8ohm, 120 Hz~12.5 kHz, 1%THD
Weight
TUNER SECTION
2.7 pounds/each
Tuning Range
FM 87.5 – 108 MHz (100 kHz
steps)
AM 530 – 1700 kHz (10 kHz
steps)
CENTER SPEAKER
System
5 multi directional driver
8 Ω
4 x 2” woofer, 1 3/4” tweeter
120 Hz – 20 kHz
435 mm x 72 mm x 63.5 mm
17.13 x 2.83 x 2.5 (inch)
1.32 kg / 2.90 pounds
26 dB Quieting Sensitivity FM 20 dB
26 dB Quieting Sensitivity AM 3162 mV/m
Impedance
Speaker drivers
Frequency response
Dimensions (w x h x d)
Image Rejection Radio
FM 25 dB
AM 28 dB
IF Rejection Ratio
FM 60 dB
AM 24 dB
Weight
Signal-to-Noise Ratio
FM 60 dB
AM 40 dB
FM 30 dB
SUBWOOFER
Impedance
AM Suppression Ratio
Harmonic Distortion
8 Ω
FM Mono 3%
FM Stereo 3%
AM 5%
FM 180 Hz – 10 kHz / 6 dB
FM 26 dB (1 kHz)
FM 23.5 dB
Speaker drivers
Frequency response
Dimensions (w x h x d)
6 1/2” woofer
30 Hz – 120 Hz
195 mm x 433 mm x 391 mm
7.68 x 17.05 x 15.39 (inch)
5.72 kg / 12.58 pounds
Frequency Response
Stereo Separation
StereoThreshold
Weight
DISC SECTION
LaserType
Disc Diameter
Video Decoding
Video DAC
Semiconductor
12cm / 8cm
MPEG-2 / MPEG-1
10 Bits
Specifications subject to change without prior
notice
Signal System
Video Format
Video S/N
PAL / NTSC
4:3 / 16:9
56 dB (minimum)
CompositeVideo Output 1.0Vp-p, 75 Ω
S-Video Output
Y - 1.0Vp-p, 75 Ω
C - 0.286Vp-p, 75 Ω
24 Bits / 96 kHz
Audio DAC
Frequency Response
4 Hz – 20 kHz (44.1 kHz)
4 Hz – 22 kHz (48 kHz)
4 Hz – 44 kHz (96 kHz)
SPDIF (Sony Philips digital
interface) Coaxial
Digital Output/Input
- PCM
IEC 60958
- Dolby Digital/DTS
IEC 60958, IEC 61937
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If
you are unable to remedy a problem by following these hints, please call 1-800-531-0039
for help.
Problem
Solution
No power.
–
–
Check if the AC power cord is properly connected.
Press the STANDBY ON on the front of the
DVD system to turn on the power.
No picture.
–
Refer to yourTV’s manual for correctVideo In
channel selection. Change theTV channel until
you see the DVD screen. (see page 21)
Press DISC on the remote.
Switch the P-SCAN at the back panel to“OFF”
position if you are not using a Progressive ScanTV.
–
–
Distorted or poor picture.
–
Check the video connection. If both S-Video
and Component (Pr PbY)Video connections
are used to connect to yourTV, the video signal
will go to S-Video automatically every time
when you power up the DVD system. To
change the setting, refer to ‘Video Output’. (see
page 32)
–
Sometimes a small amount of picture distortion
may appear. This is not a malfunction.
Clean the disc. (see page 10)
–
–
Completely distorted picture or black/
white picture.
TVs have a color system standard. If the disc’s
or DVD system’s color system is different than
yourTV’s color system, the picture may be
distorted or colorless. Set to the correct ‘TV
System’ setting. (see page 21)
The aspect ratio of the screen cannot be
changed even though you have set the
TV display.
–
–
The aspect ratio is fixed on the DVD disc.
Depending on theTV, it may not be possible to
change the aspect ratio.
No sound or distorted sound.
–
–
–
Adjust the volume.
Replace the speaker cables.
Check the speaker connections and settings.
(see pages 14, 23)
–
–
Disconnect the headphones.
Press PLAY to resume normal play mode if
necessary.
–
Press the correct source button on the remote
(TV/AV or AUX, for example) to choose the
equipment that you want to hear through the
DVD system. (see pages 12, 13, 16, 17)
The DVD system does not work.
–
Disconnect the power cord from the power
outlet for a few minutes. Reconnect the power
cord and try to operate again as usual.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Solution
The DVD player does not start playback.
–
–
Insert a readable disc with the playback side
facing down. (see page 24)
Check the disc type, color system and region
code. (see page 24)
–
–
Check for any scratches or smudges on the disc.
Press SYSTEM SETUP to turn off the setup
menu screen.
–
–
Change the rating level. (see page 35)
Moisture has condensed inside the system.
Remove the disc and leave the system turned on
for about an hour.
Cannot activate some features, such as
Angles, Subtitles, or multi-language
Audio.
–
–
The features may not be available on the DVD.
Changing the language for the sound or subtitle
is prohibited on the DVD.
There is no sound from the center and
surround speakers.
–
–
–
Make sure the center and surround speakers are
connected correctly. (see page 14)
Press SURROUND button to select a correct
surround sound setting. (see page 41)
Make sure the source you are playing is
recorded or broadcast in surround sound (DTS,
Dolby Digital, etc.)
Radio reception is poor.
–
–
If the signal is too weak, adjust the antenna or
connect an external antenna for better
reception.
Increase the distance between the system and
yourTV or VCR.
–
–
Tune in to the correct frequency.
Place the antenna farther away from any
equipment that may be causing the noise.
The remote control does not function
properly.
–
–
Select the source (DISC orTUNER, for
example) before pressing the function button
(ÉÅ, S , T.)
Reduce the distance between the remote
control and the system.
–
–
Replace the batteries with new ones.
Point the remote control directly toward the IR
sensor.
–
Check that the batteries are loaded correctly.
The timer is not working.
–
–
Set the clock correctly. (see page 20)
Press and hold CLOCK•TIMER to switch on the
timer. (see page 39)
The display panel is dark.
Low hum or buzz sound.
–
–
Press DIM again. (see page 42)
Place the DVD system as far away as possible
from electrical devices that may be causing
interference.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Analog: Sound that has not been turned into
numbers. Analog sound varies, while digital
sound has specific numerical values. These jacks
send audio through two channels, the left and
right.
Aspect ratio: The ratio of vertical and
horizontal sizes of a displayed image.The
horizontal vs. vertical ratio of conventionalTVs.
is 4:3, and that of wide-screens is 16:9.
AUDIO OUT Jacks: Jacks on the back of
the DVD System that send audio to another
system (TV, Stereo, etc.).
Bit Rate: The amount of data used to hold a
given length of music; measured in kilobits per
seconds, or kbps. Or, the speed at which you
record. Generally, the higher the bit rate, or the
higher the recording speed, the better the
sound quality. However, higher bit rates use
more space on a Disc.
Chapter: Sections of a picture or a music
piece on a DVD that are smaller than titles. A
title is composed of several chapters. Each
chapter is assigned a chapter number enabling
you to locate the chapter you want.
Clear voice: It enables the digital sound
processor to extract the voice dynamics in
movie dialog on all 5 surround channels without
compromizing on the location accuracy and the
width of the surround sound.
ComponentVideo Out Jacks: Jacks on the
back of the DVD System that send high-quality
video to aTV that has ComponentVideo In
jacks (R/G/B, Y/Pb/Pr, etc.).
Disc menu: A screen display prepared for
allowing selection of images, sounds, subtitles,
multi-angles, etc recorded on a DVD.
Digital: Sound that has been converted into
numerical values. Digital sound is available when
you use the DIGITAL AUDIO OUT COAXIAL
or OPTICAL jacks.These jacks send audio
through multiple channels, instead of just two
channels as analog does.
DTS: DigitalTheater Systems. This is a
surround sound system, but it is different from
Dolby Digital. The formats were developed by
different companies.
JPEG: A still-picture data compression system
proposed by the Joint Photographic Expert
Group, which features small decrease in image
quality in spite of its high compression ratio.
MP3: A file format with a sound data
compression system.“MP3” is the abbreviation
of Motion Picture Experts Group 1 (or
MPEG-1) Audio Layer 3. By using MP3 format.
one CD-R or CD-RW can contain about 10
times as much data volume as a regular CD can.
Multichannel: DVD is specified to have each
sound track constitute one sound field.
Multichannel refers to a structure of sound
tracks having three or more channels.
Parental control: A function of the DVD to
limit playback of the disc by the age of the users
according to the limitation level in each country.
The limitation varies from disc to disc; when it is
activated, playback will be prohibited if the
software’s level is higher than the user-set level.
PCM (Pulse Code Modulation): A system
for converting analog sound signal to digital
signal for later processing, with no data
compression used in conversion.
Playback control (PBC): Refers to the
signal recorded on video CDs or SVCDs for
controlling reproduction. By using menu screens
recorded on aVideo CD or SVCD that
supports PBC, you can enjoy interactive-type
software as well as software having a search
function.
Plug and Play: After power up, the system
will prompt the user to proceed with the
automatic installation of radio stations by simply
pressing the PLAY button on the main unit.
Progressive Scan: It displays all the horizontal
lines of a picture at one time, as a signal frame.
This system can convert the interlaced video
from DVD into progressive format for
Dolby Digital: A surround sound system
developed by Dolby Laboratories containing up
to six channels of digital audio (front left and
right, surround left and right and center.)
connection to a progressive display. It
dramatically increases the vertical resolution. A
progressive-scanTV is needed to receive
progressive scan output from the player.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Region code: A system for allowing discs to
be played back only in the region designated
beforehand.This unit will only play discs that
have compatible region codes. You can find the
region code of your unit by looking on the
product label. Some discs are compatible with
more than one region (or ALL regions).
S-Video: Produces a clear picture by sending
separate signals for the luminance and the color.
You can use S-Video only if yourTV has S-video
In jack.
Sampling Frequency: Frequency of sampling
data when analog data is converted to digital
data Sampling frequency numerically represents
how many time the original analog signal is
sampled per second.
Seating control: It gives the user a perfect
sound and movie experience anywhere in the
room, providing maximum flexibility and real
total immersion because the user can choose
their preferred seat.
Surround: A system for creating realistic
three-dimensional sound fields full of realism by
arranging multiple speakers around the listener.
Title: The longest section of a picture or music
feature on DVD, music, etc., in video software, or
the entire album in audio software. Each title is
assigned a title number enabling you to locate
the title you want.
VIDEO OUT jack: Jack on the back of the
DVD System that sends video to aTV.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
AUDIO SYSTEM
OneYear Free Labor
OneYear Free Service on Parts
This product must be carried in for repair.
WHO IS COVERED?
MAKE SUREYOU KEEP...
You must have proof of purchase to receive warranty ser-
vice.A sales receipt or other document showing that you
purchased the product is considered proof of purchase.
Please keep your sales receipt or other document showing
proof of purchase.Attach it to this owner’s manual and
keep both nearby.Also keep the original box and packing
material in case you need to return your product.
WHAT IS COVERED?
Warranty coverage begins the day you buy your product.
For one year thereafter, all parts will be repaired or
replaced, and labor is free.After one year from the day of
purchase, you pay for the replacement or repair of all
parts, and for all labor charges.
BEFORE REQUESTING SERVICE...
Please check your owner's manual for assistance. If you
have additional questions, call us at 1-800-531-0039.
TO GET WARRANTY SERVICE IN U.S.A.,
All parts, including repaired and replaced parts, are covered PUERTO RICO, OR U.S. VIRGIN ISLANDS...
only for the original warranty period.When the warranty
on the product expires, the warranty on all replaced and
repaired parts also expires.
Take the product to a Philips factory service center (see
enclosed list) or authorized service center for repair.When
the product has been repaired, you must pick up the unit at
the center. Centers may keep defective parts.
(In U.S.A., Puerto Rico, and U.S.Virgin Islands, all implied
warranties, including implied warranties of merchantability
and fitness for a particular purpose, are limited in duration
to the duration of this express warranty. But, because some
states do not allow limitations on how long an implied
warranty may last, this limitation may not apply to you.)
WHAT IS EXCLUDED?
Your warranty does not cover:
• labor charges for installation or setup of the product,
adjustment of customer controls on the product, and
installation or repair of antenna systems outside of the
product.
• product repair and/or part replacement because of misuse,
accident, unauthorized repair or other cause not within the
control of Philips.
TO GET WARRANTY SERVICE IN CANADA...
Please contact Philips at:
• reception problems caused by signal conditions or cable
or antenna systems outside the unit.
• a product that requires modification or adaptation to
enable it to operate in any country other than the coun-
try for which it was designed, manufactured, approved
and/or authorized, or repair of products damaged by
these modifications.
• incidental or consequential damages resulting from the
product. (Some states do not allow the exclusion of inci-
dental or consequential damages, so the above exclusion
may not apply to you.This includes, but is not limited to,
prerecorded material, whether copyrighted or not copy-
righted.)
1-800-661-6162 (French Speaking)
1-800-531-0039 (English or Spanish Speaking)
(In Canada, this warranty is given in lieu of all other war-
ranties. No other warranties are expressed or implied,
including any implied warranties of merchantability or fit-
ness for a particular purpose. Philips is not liable under any
circumstances for any direct, indirect, special, incidental or
consequential damages, howsoever incurred, even if notified
of the possibility of such damages.)
REMEMBER...
Please record below the model and serial numbers found
on the product.Also, please fill out and mail your warranty
registration card promptly. It will be easier for us to notify
you if necessary.
• a product that is used for commercial or institutional
purposes.
WHERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where the
product is officially distributed by Philips. In countries
where Philips does not distribute the product, the local
Philips service organization will attempt to provide service
(although there may be a delay if the appropriate spare
parts and technical manual(s) are not readily available).
MODEL # __________________________________
SERIAL #
__________________________________
This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.
Philips, P.O. Box 520890, Miami, FL 33152, USA, (402) 536-4171
EL4965E007 / 8-02
48
Download from Www.Somanuals.com. All Manuals Search And Download.
|