Mini Hi-Fi System
FW-C390
Download from Www.Somanuals.com. All Manuals Search And Download.
•
CD
TAPE 1/2
AUX
TUNER
MAX
4
8
INC.SURR.
^
≥
CD DIRECT
2
1
3
3
∞
SLEEP
REPEAT
SHUFFLE
§
*
VOLUME
*
5
DBB 1/2/3
DSC
VEC
7
£
≤
™
¡
1
2
)
(
3
4
5
6
*
7
&
^
%
8
9
0
$
#
@
!
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SF
DK
Advarsel: Usynlig laserstråling ved åbning
når sikkerhedsafbrydere er ude af funktion.
Undgå utsættelse for stråling.
Luokan 1 laserlaite
Varoitus! Laitteen käyttäminen
muulla kuin tässä käyttöohjeessa mainitulla
tavalla saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle
näkymättömälle lasersäteilylle.
Oikeus muutoksiin varataan. Laite ei
saa olla alttiina tippu-ja roiskevedelle.
Bemærk: Netafbryderen er sekundært
indkoblet og ofbryder ikke strømmen fra
nettet. Den indbyggede netdel er derfor
tilsluttet til lysnettet så længe netstikket
sidder i stikkontakten.
Huom.Toiminnanvalitsin on kytketty
toisiopuolelle, eikä se kytke laitetta irti
sähköverkosta. Sisäänrakennettu verkko-
osa on kytkettynä sähköverkkoon aina
silloin, kun pistoke on pistorasiassa.
S
Klass 1 laseraparat
Varning! Om apparaten används på annat
sätt än i denna bruksanvisning specificerats,
kan användaren utsättas för osynlig
laserstrålning, som överskrider gränsen för
laserklass 1.
Observera! Stömbrytaren är sekundärt
kopplad och bryter inte strömmen från
nätet. Den inbyggda nätdelen är därför
ansluten till elnätet så länge stickproppen
sitter i vägguttaget.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
English ------------------------------------------------ 6
Français -------------------------------------------- 31
Español --------------------------------------------- 56
Deutsch--------------------------------------------- 81
Nederlands -------------------------------------- 107
Italiano-------------------------------------------- 132
Svenska ------------------------------------------- 157
Dansk --------------------------------------------- 182
Suomi --------------------------------------------- 207
Português ---------------------------------------- 232
EÏÏËÓÈο----------------------------------------- 257
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
General Information
Radio Reception
Supplied accessories ............................................ 7
Acknowledgement ............................................... 7
Environmental information ................................ 7
Safety information ................................................ 7
Tuning to radio stations .................................... 19
Storing preset radio stations .................... 19–20
Automatic preset programming
Manual preset programming
Tuning to preset radio stations ....................... 20
RDS ................................................................ 20–21
Setting the RDS clock
NEWS ................................................................... 21
Preparations
Rear connections ............................................. 8–9
Power
Antennas connection
Speakers connection
Tape Operation/Recording
Optional connection ........................................... 9
Connecting other equipment to your system
Inserting batteries into the remote
Loading tape ........................................................ 22
Playing tapes ........................................................ 23
Rewinding/Fast forwarding ............................... 23
General information on recording ................. 23
Preparation for recording ................................ 24
One touch recording......................................... 24
CD Synchronised start recording .................. 24
Dubbing tapes ..................................................... 24
control .................................................................... 9
Controls
Controls on the system and remote
control ........................................................... 10–11
Clock/Timer
View clock............................................................ 25
Clock setting ....................................................... 25
Timer setting ....................................................... 26
Deactivating the timer
Activating the timer
Basic Functions
Plug and Play ........................................................ 12
Demonstration mode........................................ 13
Switching the system on ................................... 13
Switching the system to standby mode ........ 13
Switching the system to Eco Power
Sleep timer setting ...................................... 26–27
standby mode ...................................................... 13
Dim mode ............................................................ 13
Volume control ................................................... 14
Sound navigation.......................................... 14–15
MAX sound
External Sources
Listening to external sources .......................... 27
VEC (Victual Environment Control)
DSC (Digital Sound Control)
DBB (Dynamic Bass Boost)
Incredible Surround
Specifications ........................................... 28
Maintenance.............................................. 29
Troubleshooting ............................. 29–30
CD Operation
Discs for playback .............................................. 16
Loading discs ....................................................... 16
Playing discs ......................................................... 17
Selecting a desired track/passage.................... 17
Replacing discs during playback ...................... 17
Repeat and Shuffle.............................................. 17
Repeat play
Random play
Programming the disc tracks ........................... 18
Erasing the programme..................................... 18
6
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
This product complies with the radio
interference requirements of the European
Community.
Safety information
G
Before operating the system, check that the
operating voltage indicated on the typeplate (or
the voltage indication beside the voltage
selector) of your system is identical with the
voltage of your local power supply. If not, please
consult your dealer.
Supplied accessories
– 2 speaker boxes
– remote control
– batteries (two AA size) for remote control
– AM loop antenna
– FM wire antenna
G
G
Place the system on a flat, hard and stable
surface.
Place the system in a location with adequate
ventilation to prevent internal heat build-up in
your system. Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.
– AC power cord
Acknowledgement
Energy Star
As an ENERGY STAR
R
G
G
Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.
Partner, Philips has
determined that this product
R
meets the ENERGY STAR
The lens may cloud over when the system is
suddenly moved from cold to warm
guidelines for energy efficiency.
surroundings, making it impossible to play a disc.
Leave the system in the warm environment until
the moisture evaporates.
Environmental information
All unnecessary packaging has been omitted.We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
G
G
The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
When the system is switched to Standby
mode, it is still consuming some power.
To disconnect the system from the
power supply completely, remove the AC
power plug from the wall socket.
Your system consists of materials which can be
recycled and reused if disassembled by a
specialised company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
AM loop
antenna
FM wire antenna
FM AERIAL
75Ω
AUX/
CDR
IN
R
L
AM ANTENNA
speaker
(right)
speaker
(left)
+
AC
MAINS
R
—
—
L
+
SPEAKERS 6Ω
AC power cord
Rear connections
B Antennas Connection
Connect the supplied AM loop antenna and FM
antenna to the respective terminals.Adjust the
position of the antenna for optimal reception.
The type plate is located at the rear of the
system.
For users in the U.K.: please follow the
instructions on page 2.
AM Antenna
A Power
Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
WARNING!
– For optimal performance, use only the
original power cable.
Fix the claw
to the slot
– Never make or change any connections
with the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
G
Position the antenna as far as possible from aTV,
VCR or other radiation source.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
FM Antenna
Optional connection
The optional equipment and connecting cords
are not supplied. Refer to the operating
instructions of the connected equipment for
details.
Connecting other equipment to your
system
Use a cinch cable to connect AUX/CDR IN to
the analogue audio out terminals of an external
equipment (TV,VCR, Laser Disc player, DVD
player or CD Recorder).
G
For better FM stereo reception, connect an
outdoor FM antenna to the FM ANTENNA
terminal.
C Speakers Connection
Note:
Front Speakers
– If you are connecting equipment with a mono
output (a single audio out terminal), connect it to
the AUX/CDR IN left terminal. Alternatively, you
can use a “single to double” cinch cable (the output
sound still remain mono).
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "R" and left speaker to
"L", coloured (marked) wire to "+" and black
(unmarked) wire to "-".
Inserting batteries into the
1
2
remote control
Insert two batteries (Type R06 or AA) into the
remote control with the correct polarity as
indicated by the "+" and "-" symbols inside
the battery compartment.
G
Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
CAUTION!
– Remove batteries if they are exhausted
or will not be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances, so
they should be disposed off properly.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls (illustrations on page 3)
ÉÅ PLAY•PAUSE
Controls on the system and
remote control
for CD ................. to start or interrupt playback.
forTape ............... to start playback.
for Plug & Play…(on the system only) to initiate
and start plug & play mode.
1 STANDBY ON y
–
to switch the system on or to standby mode.
í PREV / ë NEXT (4 PRESET 3)
for CD ................. to skip to the beginning of the
current, previous, or next track.
forTuner ............. to select a preset radio station.
for Clock ............ (on the system only) to set the
minute.
2 ECO POWER
–
to switch the system on or to Eco Power
standby mode.
3 DISC 1/2/3 (CD DIRECT 1/2/3)
to select a disc tray for playback.
–
6 SOUND NAVIGATION
4 Source selection – to select the following :
–
to select and activate the JOG control for the
desired sound feature : DBB, DSC orVEC.
CD (CD 1•2•3)
–
–
–
–
to select disc tray 1, 2 or 3.
7 JOG
to select the desired sound effect for the
TUNER (BAND)
to select waveband : FM, MW or LW.
–
selected sound feature.
TAPE (TAPE 1•2)
to select tape deck 1 or 2.
DBB ..................DBB 1, DBB 2 or DBB 3.
DSC ..................OPTIMAL, JAZZ, ROCK or
TECHNO.
AUX (VIDEO/CDR)
to select the input for an additional appliance :
AUX or CDR.
VEC ..................CINEMA, HALL or CONCERT.
8 INCREDIBLE SURROUND (INC.
SURR.)
5 Mode Selection
–
to activate or deactivate the surround sound
effect.
à
á SEARCH•TUNING
for CD ................. to search backward/forward.
forTuner ............. to tune to a lower or higher
radio frequency.
9 CLOCK•TIMER
to view the clock, set the clock or set the timer.
–
forTape ............... to rewind or fast forward.
for Clock ............ (on the system only) to set the
hour.
0 Tape Deck Operation
RECORD G
–
–
–
to start recording on tape deck 2.
Ç STOP•CLEAR (DEMO STOP)
for CD ................. to stop playback or to clear a
programme.
forTuner ............. (on the system only) to stop
programming.
forTape ............... to stop playback or recording.
for Demo........... (on the system only) to activate/
deactivate the demonstration.
DUBBING
to dub a tape.
A. REPLAY
to select continuous playback in either AUTO
REPLAY or ONCE mode only.
! Tape deck 1
for Clock ............ (on the system only) to exit clock
setting or cancel timer.
@ Tape deck 2
for Plug & Play…(on the system only) to exit plug
& play mode.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
27
# DIM MODE
SHUFFLE
–
to select different brightness for the display
screen : DIM 1, DIM 2, DIM 3 or DIM OFF.
–
to playback all available discs and their tracks/
programme in random order.
• B
$ # OPEN
–
–
to switch the system to standby mode.
to switch the system to Eco Power standby
mode.
–
to open the tape deck door.
% PROGRAM
for CD ................. to programme disc tracks.
forTuner ............. to programme preset radio
stations.
for Clock ............ to select 12- or 24-hour clock
mode.
Notes for remote control:
^ MAX SOUND (MAX)
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (CD orTUNER,
for example).
– Then select the desired function (É, í,
ë, for example).
–
to activate or deactivate the optimal mix of
various sound features.
& n
–
to connect headphones.
* VOLUME (VOLUME +/-)
–
to increase or decrease the volume.
( NEWS
–
to hear News automatically.
) RDS
–
to select RDS information.
¡ Disc tray
™ OPEN•CLOSE
–
to open or close the disc tray.
£ DISC CHANGE
to change disc(s).
24 Display screen
to view the current status of the system.
25 REPEAT
–
–
–
to playback track(s)/disc(s)/programme
repeatedly.
§ SLEEP
to activate/deactivate or set the sleep timer.
–
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
CD
TAPE 1/2
AUX
TUNER
MAX
INC.SURR.
CD DIRECT
SLEEP
REPEAT
SHUFFLE
VOLUME
DBB 1/2/3
DSC
VEC
IMPORTANT!
Before you operate the system, complete
the preparation procedures.
➜ If RDS station does not transmit RDS time
within 90 seconds, the programme will exit
automatically and the display will show “NO RDS
TIME”.
G
If the first preset is non-RDS station;
➜ The programme will exit automatically.
Plug and Play
Plug and Play allows you to store all available
RDS stations and radio stations automatically.
To reinstall Plug and Play
1
2
In standby or demonstration mode, press and
holdÉÅon the system until "AUTO INSTALL
-PRESS PLAY" is displayed.
First time setup/power up
1
2
When you turn on the main supply, "AUTO
INSTALL- PRESS PLAY" is displayed.
PressÉÅagain to start installation.
➜ All previously stored radio stations will be
replaced.
PressÉÅ on the system to start installation.
➜ "INSTALL" is displayed, followed by "TUNER"
and "AUTO".
➜ PROG starts flashing.
To exit without storing the Plug and Play
Press Çon the system.
➜ If you do not complete the Plug and Play
installation, the function will be restarted when
you next turn on the main supply again.
➜ The system will automatically store the radio
stations with sufficient signal strength, starting
from all RDS stations and followed by FM, MW
and LW bands respectively. Weak RDS stations
may be stored in later presets.
G
➜ When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station (or the first available
RDS station) will be played.
Notes:
– When the power is turned on, the disc tray may
open and close to initialise the system.
– If no stereo frequency is detected during Plug
and Play, "CHECK ANTENNA" will be displayed.
– During Plug and Play, if no button is pressed
within 15 seconds, the system will exit Plug and
Play mode.
3
The system will proceed to set the RDS clock if
the first preset is an RDS station.
➜ "INSTALL" is displayed, followed by "TIME"
and "SEARCH RDS TIME".
➜ When RDS time is read, "RDS TIME" is
displayed and the current time will be stored.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Demonstration mode
Switching the system to Eco
The system has a demonstration mode that
shows the various features offered by the system.
Power standby mode (< 1Watt)
G
Press ECO POWER (or press and hold B on
the remote control).
➜ "ECO PWR" is displayed, then the display
screen will go blank.
➜ The low power ECO POWER LED will be
lighted.
To activate the demonstration
In standby mode, press and holdÇon the
system until "DEMO ON" is displayed.
➜ The demonstration will begin.
G
G
To deactivate the demonstration
Press and holdÇon the system until
"DEMO OFF" is displayed.
Note:
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to Eco Power standby or standby mode.
➜ The system will switch to standby mode.
Switching the system on
Dim mode
In standby/demonstration mode
You can select the desired brightness for the
display.
G
G
G
Press STANDBY ON to switch on the last
selected source.
G
In any source mode (except Eco Power standby
or standby mode), press DIM MODE
repeatedly to select DIM 1, DIM 2, DIM 3 or
DIM OFF display mode.
Press CD, TUNER, TAPE (TAPE 1/2) or
AUX.
Press OPEN•CLOSE.
➜ The system will switch to CD mode.
➜ DIM is shown, except for DIM OFF mode.
In Eco Power standby mode
Spectrum
Analyser
DIM
mode
Brightness
G
G
Press ECO POWER to switch on the last
selected source.
1
normal
half
off
on
off
on
2
Press CD, TUNER, TAPE 1/2 or AUX on the
remote control.
3
half
OFF
normal
Switching the system to standby
mode
In demonstration mode
G
G
Press and hold Ç on the system.
In any other source mode (except Eco
Power standby mode)
Press STANDBY ON (or B on the remote
control).
➜ The clock will appear on the display when the
system is in standby mode.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Volume control
Adjust VOLUME to increase (turn knob
clockwise or pressVOLUME +) or decrease
(turn knob anti-clockwise or pressVOLUME -)
the sound level.
1
JOG
=
C
1
2
To listen through the
headphones
Connect the headphones plug to
the n socket at the front of the
system.
=
G
1
➜ The speakers will be muted.
VEC (Virtual Environment Control)
TheVEC feature enables you to adjust the
system to select a type of environment.
Sound navigation
For optimal sound listening, select only one
of the following navigation sound controls
at a time : MAX SOUND, DSC or VEC.
1
2
Press VEC.
➜ The selectedVEC is shown.
Adjust the JOG control (or press VEC on the
remote control repeatedly) to select : CINEMA,
HALL or CONCERT.
MAX Sound
MAX sound provides the best mixture of
various sound features (DSC, VEC, DBB, for
example).
Note:
– When you selectVEC, Incredible Surround will
switch on automatically.
G
Press MAX SOUND (or MAX on the remote
control) repeatedly.
DSC (Digital Sound Control)
The DSC feature enables you to enjoy special
sound effects that have preset equaliser settings,
providing the best music reproduction.
➜ If activated, MAX SOUND is shown and the
MAX SOUND button lights up.
➜ If deactivated,“MAX OFF” is displayed.
1
2
Press DSC.
➜ The selected DSC is shown.
Note:
– When MAX sound is selected, all other sound
navigation will switch off automatically.
Adjust the JOG control (or press DSC on the
remote control repeatedly) to select : OPTIMAL,
JAZZ, ROCK orTECHNO.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Incredible Surround
DBB (Dynamic Bass Boost)
There are three DBB settings to enhance the
bass response.
The Incredible Surround magnifies the virtual
distance between the front speakers for an
incredibly wide, enveloping, stereo effect.
1
2
Press DBB.
➜ The selected DBB is shown, except for DBB
OFF mode.
G
Press INCREDIBLE SURROUND (or INC.
SURR. on the remote control) repeatedly.
➜ If activated, INC. SUR is shown and
“INCR SURROUND” is displayed.
Adjust the JOG control (or press DBB 1/2/3
on the remote control repeatedly) to select :
DBB 1, DBB 2, DBB 3 or DBB OFF.
➜ If deactivated,“IS OFF” is displayed.
Note:
– Some discs or tapes might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce the
volume.
Automatic DSC-DBB selection
The best DBB setting is generated automatically
for each DSC selection. You can manually select
the DBB setting that best suits your listening
environment.
DSC
DBB
off
JAZZ
on (3)
on (3)
on (2)
ROCK
TECHNO
OPTIMAL
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Operation
CD
TAPE 1/2
AUX
TUNER
MAX
INC.SURR.
CD DIRECT
2
1
3
SLEEP
REPEAT
SHUFFLE
VOLUME
DBB 1/2/3
DSC
VEC
IMPORTANT!
Loading discs
– This system is designed for regular discs.
Therefore, do not use any accessories such
as disc stabiliser rings or disc treatment
sheets, etc., as offered on the market,
because they may jam the changer
mechanism.
1
2
Press OPEN•CLOSE to open the disc tray.
Load up to two discs on the individual disc trays.
To load the third disc, press DISC CHANGE.
➜ The disc tray will rotate until the empty tray
is ready for loading.
– Do not load more than one disc into
each tray.
Discs for playback
DISC CHANGE
OP
DISC
1
DISC
2
DISC
3
This system can playback all digital audio CD,
finalised digital audio CD-Recordable (CDR)
discs and finalised digital audio CD-Rewritable
(CDRW)discs.
1
3
Press OPEN•CLOSE to close the disc tray.
➜ "READING" is displayed. The selected disc
tray, total number of tracks and the playing time
will appear on the display.
➜ A lighted button indicates that a disc is loaded
on the disc tray.
Notes:
– Load the discs with the label side facing up.
– To ensure good system performance, wait until
the disc tray completely reads the disc(s) before
proceeding.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Operation
Playing discs
Replacing discs during playback
1
2
Press DISC CHANGE.
➜ The disc tray will open without interrupting
current playback.
To play all discs on the disc tray
Press ÉÅ.
➜ All the available discs will play once, then stop.
➜ During playback, the selected disc tray, track
number and elapsed playing time of the current
track are displayed.
G
To change the inner disc, press DISC
CHANGE again.
➜ "DISC CHANGE" is displayed and the disc
will stop playing.
➜ The disc tray will close to retrieve the inner
disc, then reopen with the inner disc accessible.
To play the selected disc only
G
In CD mode, press DISC 1/2/3 (or CD
DIRECT 1/2/3 on the remote control).
➜ The selected disc will play once, then stop.
Repeat and Shuffle
You can select and change the various play
modes before or during playback.
To interrupt playback
Press ÉÅ.
➜ The current track time flashes.
G
G
Repeat play
To resume playback, press ÉÅ again.
1
2
Press REPEAT on the remote control
repeatedly to select :
➜ "TRACK" – to repeat playback of the current
track.
➜ "DISC" – to repeat playback of the current
disc.
➜ "ALL DISC" or "PROGRAM" – to repeat
playback of all available discs or programmed
tracks.
To stop playback
Press Ç.
G
Selecting a desired track/passage
To search for a particular passage during
playback
Press and hold à or á and release it when
the desired passage is located.
G
To resume normal playback, press REPEAT
until "OFF" is displayed.
➜ During searching, the volume will be reduced.
➜ REP is shown, except for REPEAT OFF mode.
To select a desired track
G
G
Press í or ë repeatedly until the desired
track is displayed.
Random play
1
2
Press SHUFFLE on the remote control.
➜ SHUF is shown and "SHUFFLE" is displayed.
➜ All the available discs or programmed tracks
(if programme is active) will be played in random
order.
If playback is stopped, press ÉÅ to start
playback.
Note:
– In Shuffle mode, pressingí will cause the
player to skip only to the beginning of the current
track.
To resume normal playback, press SHUFFLE
again.
➜ SHUF disappears.
To skip to the beginning of the current
track during playback
Notes:
G
Press í once.
– During programme play or shuffling mode, it is
not possible to repeat playback the current disc
(Repeat Disc mode).
– Pressing the OPEN•CLOSE button will cancel all
repeat and shuffling modes.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Operation
To review the programme
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 40 tracks can be stored in the
memory in any order.
G
G
Stop playback and press í or ë repeatedly.
To exit review mode, press Ç.
Erasing the programme
1
Load the desired discs on the disc tray (refer to
“Loading discs”).
G
Press Ç once when playback is stopped or
twice during playback.
➜ PROG disappears and "PROGRAM CLEARED"
is displayed.
2
Press PROGRAM to start programming.
➜ PROG starts flashing.
3
4
Press CD or DISC 1/2/3 to select a disc.
Press í or ë repeatedly to select the desired
track.
Note:
– The programme will be erased when the system
is disconnected from the power supply or when the
disc tray is opened.
5
G
Press PROGRAM to store the track.
Repeat steps 3–5 to store other discs and
tracks.
6
To end programming, press Ç once .
➜ PROG stays and the programme mode
remains active.
For Recording, please refer to “Tape
Operation/Recording”.
➜ The total number of tracks programmed and
the total playing time are displayed.
7
To start programme play, press ÉÅ.
➜ "PLAY PROGRAM" is displayed.
Notes:
– If the total playing time is more than "99:59"
or if one of the programmed tracks has a number
greater than 30, then "--:--" is displayed
instead of the total playing time.
– If you attempt to programme more than 40
tracks, "FULL" is displayed.
– If you press any of the CD DIRECT 1/2/3
buttons on the remote control, the system will play
the selected disc or track, and the stored
programme will be ignored temporarily. The PROG
symbol also will disappear temporarily from the
display. It will reappear when playback of the
selected disc ends.
– During programming, if no button is pressed
within 20 seconds, the system will exit the
programme mode automatically.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Reception
CD
TAPE 1/2
AUX
TUNER
MAX
NEWS
INC.SURR.
CD DIRECT
2
1
3
SLEEP
REPEAT
SHUFFLE
VOLUME
DBB 1/2/3
DSC
VEC
To begin automatic preset from a desired
preset number
Press í or ë to select the desired preset
number.
➜ If a radio station has been stored in one of
the presets, it will not be stored again under
another preset number.
Tuning to radio stations
1
Press TUNER to selectTUNER mode.
G
➜ "TUNER" is displayed. A few seconds later, the
current radio frequency will appear on the
display.
2
3
Press TUNER again to select the desired
waveband : FM, MW or LW.
2
Press and hold PROGRAM until "AUTO" is
displayed.
➜ PROG starts flashing.
Press and hold à or á until the frequency
indication starts to change, then release.
➜ The system will automatically store the radio
stations with sufficient signal strength, starting
from all RDS stations and followed by FM, MW
and LW bands respectively. Weak RDS stations
may be stored in later presets.
➜ When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station (or the first available
RDS station) will be played.
➜ The display will show "SEARCH" until a radio
station with sufficient signal strength is found.
4
Repeat step 3 if necessary until you find the
desired radio station.
G
To tune to a weak station, press à or á briefly
and repeatedly until optimal reception found.
Storing preset radio stations
You can store up to 40 preset radio stations in
the memory.
To stop storing the automatic preset
G
Press PROGRAM or Ç on the system.
Automatic Preset Programming
Note:
G
Plug and Play setting (refer to “Basic Functions -
– If no preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
Plug and Play”).
OR
1
Press TUNER to selectTUNER mode.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Reception
Manual Preset Programming
RDS
RDS (Radio Data System) is a broadcasting
service that allows FM stations to send additional
information along with the regular FM radio
signal. This additional information can contain:
1
2
Tune to your desired radio station (refer to
“Tuning to radio stations”).
Press PROGRAM.
➜ PROG starts flashing.
Station name:The radio station name is
displayed.
➜ The next available preset number is displayed
for selection.
Programme type:The following programme
types exist and can be received by your tuner:
News,Affairs, Info, Sport, Educate, Drama,
Culture, Science,Varied, Pop M, Rock M, M.O.R.
(middle of the road music), Light M, Classics,
Other M, No type.
To store the radio station to another
preset number
Press í or ë to select the desired preset
number.
G
3
Press PROGRAM again to store the radio
station.
➜ PROG disappears.
Radio text (RT): text messages appear on the
display.
G
G
Repeat steps 1–3 to store other radio stations.
To receive RDS Radio Stations
Tuned to a radio station from FM band.
➜ If the radio station is transmitting RDS signal,
the RDS logo (RDS) and the radio station name
will appear on the display.
To exit manual preset mode
Press Ç on the system.
G
G
Notes:
– If you attempt to store more than 40 preset
radio stations, "FULL" is displayed.
– During programming, if no key is pressed within
20 seconds, the system will exit the programme
mode automatically.
To Check the RDS information
Press RDS repeatedly to scroll through the
following information (if available) :
STATION NAME ™ PROGRAMMETYPE ™
RADIOTEXT ™TUNED FREQUENCY ™
STATION NAME ....
Tuning to preset radio stations
G
Once you’ve programmed the radio stations,
press í or ë to select the desired preset
number.
➜ The preset number, radio frequency, and
waveband are displayed.
Notes:
– If the tuned radio station does not transmit RDS
signal or is a non RDS station, "NO RDS" is
displayed.
– If the RDS text message is not available at the
RDS station, "NO RDS TEXT" is displayed.
For Recording, please refer to “Tape
Operation/Recording”.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Reception
2
When NEWS transmission is detected, the
system will switch toTuner mode automatically.
➜ NEWS starts flashing.
Setting the RDS clock
Some RDS radio station may be transmitting a
real clock time at an interval of every minute. It
is possible to set the clock by using a time signal
which is broadcast together with the RDS signal.
Notes:
– You have to exitTuner mode before selecting
NEWS function.
1
2
Press CLOCK•TIMER twice.
– Before you activate the NEWS feature, ensure
that the first five presets have RDS stations.
– The NEWS works only once for each activation.
– The NEWS will not start if a recording is in
progress.
Press RDS.
➜ "SEARCH RDS TIME" is displayed.
➜ When RDS time is read, "RDS TIME" is
displayed and the current time will be stored.
➜ If the RDS radio station does not transmit
RDS time within 90 seconds, "NO RDS TIME" is
displayed.
– If no RDS station is detected, "NO RDS NEWS"
is displayed.
To cancel NEWS function
Note:
G
G
Press NEWS again or press TUNER to select
tuner mode.
– Some RDS radio station may be transmitting a
real time clock at a minute interval. The accuracy
of the transmitted time depends on the
transmitting RDS radio station.
During news bulletin, press any other available
source keys to execute the relevant source mode.
NEWS (only available in RDS radio station)
Once the News PTY (ProgrammeType) is
detected in a RDS radio station, it will switch to
TUNER mode automatically.
IMPORTANT!
You can activate NEWS function in standby,
demonstration or any source mode except
Tuner and Eco Power standby mode.
To activate NEWS function
1
Press NEWS until "NEWS" is displayed.
➜ NEWS is shown.
➜ It will scan the radio stations stored in the
first 5 preset and wait for the News Programme
Type data to be available in any of these RDS
radio stations.
➜ While searching NEWS in progress, the
current source activity will remain uninterrupted.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Operation/Recording
CD
TAPE 1/2
AUX
TUNER
MAX
INC.SURR.
CD DIRECT
2
1
3
SLEEP
REPEAT
SHUFFLE
VOLUME
DBB 1/2/3
DSC
VEC
IMPORTANT!
3
Close the tape deck door.
– Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may get
jammed or may burst in the mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not
recommended for use in this system.
– Store the tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer,TV or
speaker).
Playing tapes
To playback a selected tape deck
1
2
Press TAPE (or TAPE 1/2 on the remote
control) repeatedly to select tape deck 1 or 2.
Press ÉÅ.
To stop playback
Press Ç.
G
G
Loading tape
To select automatic replay or one time
playback
Press A. REPLAY repeatedly to select the
different playback modes.
1
Press OPEN to open the tape deck door.
➜ "AUTO REPLAY" (
) or "ONCE" (
)
is displayed.
AUTO REPLAY …the tape will rewind
automatically at the end of
playback and replay again. It will
replay up to a maximum of 20
times.
2
Load the tape with the open side downward and
full spool to the left.
ONCE ..............the tape will playback the
selected side once and then stop.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Operation/Recording
IMPORTANT!
Rewinding / Fast forwarding
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
1
2
Stop playback, press à or á.
➜ The tape will stop automatically at the end of
rewinding or fast forwarding.
– Recording is possible only on tape deck 2.
Press Ç to stop rewinding or fast forwarding.
Preparation for recording
Note:
1
2
Press TAPE to selectTAPE 2.
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD or
TUNER, for example).
Load a recordable tape into tape deck 2 with full
spool to the left.
3
Prepare the source to be recorded.
CD – load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX – connect external equipment.
General information on
recording
G
G
For recording, use only tape of IEC type I
(normal tape).
The recording level is set automatically,
regardless of the position of theVolume, DBB,
DSC and so forth.
When recording is in progress
➜ REC starts flashing.
G
G
G
The tape is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.
G
G
It is not possible to listen to another source,
except tape dubbing.
It is not possible to activate the timer function
during recording or tape dubbing.
To prevent accidental
recording, break out the tab
on the left shoulder of the
tape side you want to protect.
If “CHECK TAPE” is
displayed, the protection tab
has been broken. Put a piece
of clear adhesive tape over
the opening.
One touch recording
1
Press CD, TUNER or AUX to select the
source.
2
3
Start playback of the selected source.
Press RECORD to start recording.
To stop recording
G
Press Ç on the system.
Note:
– OneTouch Recording is not possible inTAPE
mode, "SELECT SOURCE" is displayed.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Operation/Recording
CD Synchronised start recording
1
Press CD to select the disc.
G
Press í or ë to select the desired track to
start recording.
G
You can programme the tracks in the order you
want them to be recorded (refer to “CD
Operation - Programming the disc tracks”).
2
Press RECORD to start recording.
➜ The disc will start playback automatically.
To select another track during recording
Press ÉÅ to interrupt recording.
1
2
3
Pressí or ë to select the desired track.
Press ÉÅ to resume recording.
To stop recording
Press Ç.
G
➜ Recording and disc playback will stop
simultaneously.
Dubbing tapes
1
Load the prerecorded tape in tape deck 1.
G
You can set the tape to the desired passage
where recording will start.
2
Press DUBBING.
➜ Playing and recording will start simultaneously.
➜ "DUB" is displayed.
G
Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tape to side B
and repeat the procedure.
To stop dubbing
G
Press Ç.
Notes:
– Dubbing of tapes is possible only from tape
deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of the same
length.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timer
CD
TAPE 1/2
AUX
TUNER
MAX
INC.SURR.
CD DIRECT
2
1
3
SLEEP
REPEAT
SHUFFLE
VOLUME
DBB 1/2/3
DSC
VEC
IMPORTANT!
5
Press CLOCK•TIMER again to store the
setting.
➜ The clock starts working.
When in Eco Power standby mode, it is not
possible to operate the clock or timer
function.
To exit without storing the setting
G
Press Çon the system.
View clock
The clock (if it is set) will be shown in standby
mode.
Notes:
– The clock setting will be cancelled when the
power cord is disconnected or if a power failure
occurs.
– During clock setting, if no button is pressed
within 90 seconds, the system will exit clock setting
mode automatically.
– To set the clock automatically through the time
information in the RDS signal, refer to "Radio
Reception - Setting the RDS clock".
To view the clock in any source mode
(CD orTUNER for example)
Press CLOCK•TIMER.
➜ The clock is displayed for a few seconds.
➜ If the clock has not been set, "--:--" is
displayed.
G
Clock setting
The clock can be set in either 12-hour or
24-hour mode ("AM 12:00" or "00:00" for
example)
1
2
In standby or view clock mode, press
CLOCK•TIMER once. In other source mode,
press CLOCK•TIMER twice.
Press PROGRAM repeatedly to select clock
mode.
➜ "AM 12:00" or "00:00" starts flashing.
3
4
Press à or á on the system repeatedly to set
the hour.
Press í or ë on the system repeatedly to set
the minute.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timer
5
Press CLOCK•TIMER to store the start time.
➜ TIMER remains on the display.
Timer setting
The system can switch on to CD,TUNER, or
TAPE 2 mode automatically at a preset time,
serving as an alarm to wake you up.
G
At the preset time, the selected source will play.
To exit without storing the setting
Press Çon the system.
IMPORTANT!
– Before setting the timer, ensure that the
clock is set correctly.
– The timer will always be switched on
after it has been set.
– The timer will not start if a recording is in
progress.
– The volume of the timer will increase
gradually from the minimum level to the
last tuned volume level.
G
Notes:
– When the preset time is reached and the
selected disc tray is empty, the next available disc
will be selected. If all the disc trays are not
available,Tuner will be selected automatically.
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
1
Press and hold CLOCK•TIMER for more than
two seconds to select timer mode.
➜ "AM 12:00" or "00:00" or the last timer
setting starts flashing.
➜ TIMER starts flashing.
➜ The selected source will be lighted while
other available sources are flashing.
Deactivating the timer
1
2
Press and hold CLOCK•TIMER for more than
two seconds.
Press Ç on the system to cancel the timer.
➜ "OFF" is displayed and the TIMER disappears.
2
Press CD, TUNER or TAPE to select the
desired source.
Activating the timer (for the same preset
time and source)
G
Before setting timer, make sure the music source
has been prepared.
1
2
Press and hold CLOCK•TIMER for more than
two seconds.
CD – Load the disc(s).To start from a specific
track, make a programme (refer to “CD
Operation - Programming the disc tracks”).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 2.
Press CLOCK•TIMER again to store.
➜ TIMER is shown.
3
4
Press à or á on the system repeatedly to set
the hour for the timer to start.
Press í or ë on the system repeatedly to set
the minute for the timer to start.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timer
To check the remaining length of time
after sleep timer is activated
Press SLEEP once.
Sleep timer setting
The sleep timer enables the system to switch to
standby mode automatically at a preset time.
G
G
1
2
Press SLEEP on the remote control repeatedly
to select a preset time.
➜ The selections are as follows (time in
minutes):
15™ 30™ 45™ 60™ OFF™ 15…
➜ "SLEEP XX" or "OFF" is displayed. "XX" is
the time in minutes.
To change the preset sleep timer
Press SLEEP again while the remaining sleep
timer is shown.
➜ The display will show the next sleep timer
options.
To deactivate the sleep timer
G
Press SLEEP repeatedly until "OFF" is displayed,
or press the STANDBY ON button.
When you reach the desired length of time, stop
pressing the SLEEP button.
➜ SLEEP is shown, except for "OFF" mode.
➜ The sleep timer is now set. Before the system
switches to standby mode, a countdown of 10
seconds is displayed.
"SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1"
™ "SLEEP"
External Sources
Note:
– All the sound control features (DSC or DBB, for
example) are available for selection.
– Refer to the operating instructions for the
connected equipment for details.
For Recording, please refer to “Tape
Operation/Recording”.
Listening to external sources
1
2
Connect the audio out terminals of the external
equipment (TV,VCR, Laser Disc player, DVD
player or CD Recorder) to the AUX/CDR IN
terminals of your system.
Press AUX to select external equipment.
➜ "AUX" or "CDR" is displayed.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
SPEAKERS
AMPLIFIER
System .................... 3-way; double port bass reflex
Impedance........................................................................ 6 Ω
Woofer ................................................................... 1 x 5.25"
Tweeter...................................................................... 1 x 2.5"
Dimensions (w x h x d) . 210 x 315 x 235 (mm)
Weight................................................................ 3.0 kg each
Output power ................................... 2 x 120 W MPO
....................................................................2 x 60W RMS(1)
Signal-to-noise ratio.......................... ≥ 67 dBA (IEC)
Frequency response .......................... 50 – 15000 Hz
Input sensitivity
AUX/CDR In .......................................... 500 mV / 1V
Output
GENERAL
Speakers ....................................................................≥ 6 Ω
Material/finish ................................... Polystyrene/Metal
AC Power .....................................220 – 230V / 50 Hz
Power Consumption
Headphones...................................... 32 Ω – 1000 Ω
(1) (6 Ω, 1 kHz, 10%THD)
Active ......................................................................... 60 W
Standby .................................................................. ≤ 25 W
Eco Power standby ......................................... < 1 W
Dimensions (w x h x d) .. 265 x 310 x 381 (mm)
Weight (without speakers) ................................. 7.0 kg
CD PLAYER
Number of programmable tracks ......................... 40
Frequency response .......................... 20 – 20000 Hz
Signal-to-noise ratio....................................... ≥ 80 dBA
Channel separation ..........................≥ 60 dB (1 kHz)
Total harmonic distortion........................... < 0.003%
TUNER
Specifications and external appearance are
subject to change without notice.
FM wave range ................................... 87.5 – 108 MHz
MW wave rang................................... 531 – 1602 kHz
LW wave range ..................................... 153 – 279 kHz
Number of presets ........................................................ 40
Antenna
FM ....................................................................... 75 Ω wire
AM.............................................................. Loop antenna
TAPE PLAYER
Frequency response
Normal tape (type I)...... 80 – 12500 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I)................................. ≥ 48 dBA
Wow and flutter ......................................... ≤ 0.4% DIN
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Cleaning the Cabinet
Cleaning the Heads and theTape Paths
To ensure good recording and playback quality,
clean the heads A, the capstan(s) B, and
pressure roller(s) C after every 50 hours of
tape operation.
G
G
G
G
Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
G
Cleaning Discs
G
G
Use a cotton swab slightly moistened with
cleaning fluid or alcohol.
You also can clean the heads by playing a
cleaning tape once.
When a disc becomes dirty,
clean it with a cleaning cloth.
Wipe the disc from the centre
out. Do not wipe in circular
motion.
Do not use solvents such as
benzene, thinner, commercially available cleaners,
or antistatic spray intended for analogue records.
C
B
A
B
C
Cleaning the disc lens
After prolonged use, dirt or dust may
accumulate at the disc lens.To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.
Demagnetising the heads
Use a demagnetising tape available at your
dealer.
G
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to solve a problem by following these hints, consult your dealer or service centre.
Problem
Solution
CD OPERATION
“NO DISC” is displayed.
–
–
–
Insert a disc.
Check if the disc is inserted upside down.
Wait until the moisture condensation at the lens
has cleared.
–
–
Replace or clean the disc, see “Maintenance”.
“DISC NOT FINALIZED” is displayed.
Use a finalised CD-RW or CD-R.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
RADIO RECEPTION
Radio reception is poor.
–
–
If the signal is too weak, adjust the antenna or
connect an external antenna for better reception.
Increase the distance between the Mini HiFi
System and yourTV orVCR.
TAPE OPERATION/RECORDING
Recording or playback cannot be made.
–
–
–
Clean deck parts, see “Maintenance”.
Use only NORMAL (IEC I) tape.
Apply a piece of adhesive tape over the missing
tab space.
The tape deck door cannot open.
GENERAL
–
Remove and reconnect the AC power plug and
switch on the system again.
The system does not react when buttons
are pressed.
–
Remove and reconnect the AC power plug and
switch on the system again.
Sound cannot be heard or is of poor
quality.
–
–
–
–
Adjust the volume.
Disconnect the headphones.
Check that the speakers are connected correctly.
Check if the stripped speaker wire is clamped.
The left and right sound outputs are
reversed.
–
Check the speaker connections and location.
The remote control does not function
properly.
–
–
–
Select the source (CD orTUNER, for example)
before pressing the function button (É,í,ë).
Reduce the distance between the remote control
and the system.
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
Replace the batteries.
–
–
Point the remote control directly towards the IR
sensor.
The timer is not working.
–
–
Set the clock correctly.
Press and hold CLOCK•TIMER to switch on the
timer.
–
If recording or tape dubbing is in progress, stop
recording.
Not all lighted buttons are showing light.
The Clock/Timer setting is erased.
–
–
Press DIM to select DIM OFF display mode.
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
The system displays features
–
Press and hold Çon the system to switch off
automatically and buttons start flashing.
the demonstration.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
|