Rwegwistewr yo.upr hproildiupctsan.dcgoetmsup/pworteatlcome
DCB293
EN User manual
3
23
43
65
IT Manuale utente
NO Brukerhåndbok
SV Användarhandbok
87
DA Brugervejledning
DE Benutzerhandbuch
FR Mode d’emploi
109
129
Download from Www.Somanuals.com. All Manuals Search And Download.
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
1 Important
Safety
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
n Battery usage CAUTION – To prevent
battery leakage which may result in
bodily injury, property damage, or
damage to the unit:
d Follow all instructions.
‡ꢀ Install all batteries correctly, + and -
as marked on the unit.
‡ꢀ Do not mix batteries (old and new
or carbon and alkaline, etc.).
e Do not use this apparatus near water.
f Clean only with dry cloth.
‡ꢀ Remove batteries when the unit is
not used for a long time.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
o Apparatus shall not be exposed to
dripping or splashing.
h Do not install near any heat sources
such as radiators, heat registers, stoves,
RUꢀRWKHUꢀDSSDUDWXVꢀꢁLQFOXGLQJꢀDPSOLÀHUVꢄꢀ
that produce heat.
p Do not place any sources of danger on
WKHꢀDSSDUDWXVꢀꢁHꢂJꢂꢀOLTXLGꢀÀOOHGꢀREMHFWVꢃꢀ
lighted candles).
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
q This product may contain lead and
mercury. Disposal of these materials
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
j Only use attachments/accessories
VSHFLÀHGꢀE\ꢀWKHꢀPDQXIDFWXUHUꢂ
r Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain
readily operable.
k Use only with the cart,
stand, tripod, bracket,
RUꢀWDEOHꢀVSHFLÀHGꢀE\ꢀ
the manufacturer or
sold with the apparatus.
When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-
over.
Warning
‡ Never remove the casing of this apparatus.
‡ Never lubricate any part of this apparatus.
‡ Never place this apparatus on other electrical
equipment.
‡ Keep this apparatus away from direct sunlight,
QDNHGꢀÁDPHVꢀRUꢀKHDWꢂꢀ
l Unplug this apparatus during lightning
storms or when unused for long periods
of time.
‡ Never look into the laser beam inside this
apparatus.
‡ Ensure that you always have easy access to the
power cord, plug or adaptor to disconnect this
apparatus from the power.
mꢀ 5HIHUꢀDOOꢀVHUYLFLQJꢀWRꢀTXDOLÀHGꢀVHUYLFHꢀ
personnel. Servicing is required when
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Hearing safety
Listen at a moderate volume.
Notice
$Q\ꢀFKDQJHVꢀRUꢀPRGLÀFDWLRQVꢀPDGHꢀWRꢀWKLVꢀ
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
‡ꢀ Using headphones at a high volume can
impair your hearing. This product can
produce sounds in decibel ranges that
may cause hearing loss for a normal
person, even for exposure less than a
minute. The higher decibel ranges are
offered for those that may have already
experienced some hearing loss.
‡ꢀ Sound can be deceiving. Over time your
hearing ‘comfort level’ adapts to higher
volumes of sound. So after prolonged
listening, what sounds ‘normal’ can
actually be loud and harmful to your
hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
This product complies with the radio
interference requirements of the European
Community.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
‡ꢀ Set your volume control at a low setting.
‡ꢀ Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
‡ꢀ Prolonged exposure to sound, even
at normally ‘safe’ levels, can also cause
hearing loss.
‡ꢀ Be sure to use your equipment
reasonably and take appropriate breaks.
‡ꢀ Listen at reasonable volumes for
reasonable periods of time.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment
and human health.
‡ꢀ Be careful not to adjust the volume as
your hearing adapts.
‡ꢀ Do not turn up the volume so high that
you can’t hear what’s around you.
‡ꢀ You should use caution or temporarily
discontinue use in potentially hazardous
situations. Do not use headphones while
operating a motorized vehicle, cycling,
VNDWHERDUGLQJꢃꢀHWFꢂꢄꢀLWꢀPD\ꢀFUHDWHꢀDꢀWUDIÀFꢀ
hazard and is illegal in many areas.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
negative consequences for the environmental
and human health.
Norge
7\SHVNLOWꢀÀQQHVꢀSnꢀDSSDUDWHQVꢀXQGHUVLGHꢂ
Environmental information
Observer: Nettbryteren er sekundert innkoplet.
Den innebygde netdelen er derfor ikke
IUDNRSOHWꢀQHWWHWꢀVnꢀOHQJHꢀDSSDUDWHWꢀHUꢀWLOVOXWWHWꢀ
nettkontakten.
)RUꢀnꢀUHGXVHUHꢀIDUHQꢀIRUꢀEUDQQꢀHOOHUꢀHOHNWULVNꢀ
støt, skal apparatet ikke utsettes for regn eller
fuktighet.
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
The making of unauthorized copies of
copy-protected material, including computer
SURJUDPVꢃꢀÀOHVꢃꢀEURDGFDVWVꢀDQGꢀVRXQGꢀ
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
This apparatus includes this label:
Note
‡ The type plate is located on the bottom of the
apparatus.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
What’s in the box
2 Your Micro Hi-
Fi System
Check and identify the contents of your
package:
‡ꢀ Main unit
‡ꢀ Remote control
Congratulations on your purchase, and
ZHOFRPHꢀWRꢀ3KLOLSVꢅꢀ7RꢀIXOO\ꢀEHQHÀWꢀIURPꢀWKHꢀ
support that Philips offers, register your product
‡ꢀ Power adaptor
‡ꢀ 1 x MP3 link cable
‡ꢀ Mounting kit (2 dowels and 2 screws)
‡ꢀ Quick start guide
‡ꢀ User manual
‡ꢀ Wall mounting instructions
Introduction
With this unit, you can enjoy audio from discs,
USB devices, iPod players, iPhone and listen to
tuner/Digital Audio Broadcasting (DAB) radio
stations, or other external devices.
The unit offers Digital Sound Control (DSC)
and Dynamic Bass Boost (DBB) to enrich
sound.
The unit supports the following media formats:
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the main unit
a
n
m
l
b
c
d
k
e
f
g
h
i
j
h
a
‡ꢀ Turn on the unit, or switch to
standby mode, or switch to Eco
Power standby.
‡ꢀ Jack for a USB mass storage device.
b MP3 LINK
‡ꢀ Audio input jack (3.5mm) for an
external audio device.
i Dock for iPod/iPhone
IR
c SOURCE
‡ꢀ Remote control sensor.
‡ꢀ Select a source: CD, iPod, FM/DAB,
USB, or MP3 link.
j
‡ꢀ Open/close the disc compartment.
d
/
k
/MENU
‡ꢀ Skip to the previous/next track.
‡ꢀ Search within a track.
‡ꢀ Tune to a radio station.
‡ꢀ Adjust hour/minute digits.
‡ꢀ Select 12 hour or 24 hour format.
‡ꢀ Stop play or erase a program.
‡ꢀ Access and exit a menu.
l VOLUME + / -
‡ꢀ Adjust volume.
e Display panel
‡ꢀ Show current status.
m
/ENTER
‡ꢀ Start or pause play.
‡ꢀ &RQÀUPꢀDꢀVHOHFWLRQꢂ
‡ꢀ Access the iPod menu.
‡ꢀ In FM mode, switch between mono
and stereo signals.
f Disc compartment
g Eco-power indicator
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
n
c CD
‡ꢀ Select disc source.
‡ꢀ Jack for the headphone.
d
/
‡ꢀ Navigate in the iPod/DAB menu.
‡ꢀ Skip to the previous/next album.
‡ꢀ Skip to the previous/next radio
station.
Overview of the remote
control
e
/
‡ꢀ Navigate in the iPod/DAB menu.
‡ꢀ Skip to the previous/next album.
‡ꢀ Skip to the previous/next track.
‡ꢀ Search within a track.
a
OPEN/CLOSE
b
CD
TUNER
DAB
‡ꢀ Tune to a radio station.
‡ꢀ Adjust hour/minute digits.
‡ꢀ Select 12 hour or 24 hour format.
PRESET/ALBUM
c
d
s
f
/ENTER
e
f
ENTER
‡ꢀ Start or pause play.
‡ꢀ &RQÀUPꢀDꢀVHOHFWLRQꢂꢀ
‡ꢀ Access the iPod menu.
‡ꢀ In FM mode, switch between mono
and stereo signals.
MP LINK
3
USB
g
r
q
DISPLAY
RDS
MENU
h
i
j
g USB/MP3 LINK
VOL
‡ꢀ Select USB device source.
‡ꢀ Select external audio device source.
1
4
2
5
8
3
6
9
h RDS/DISPLAY
k
‡ꢀ Display time.
‡ꢀ Display RDS/DAB information.
‡ꢀ Select display information during play.
7
PROG/
CLOCK SET
MODE/
SCAN
0
l
m
n
p
o
i
SLEEP/
TIMER
DSC
DBB
‡ꢀ Mute or restore volume.
j VOL +/-
‡ꢀ Adjust volume.
k Numeric keypad
‡ꢀ Select a track from a disc directly.
‡ꢀ Select a preset radio station.
l PROG/CLOCK SET
‡ꢀ Program tracks.
a
‡ꢀ Turn on the unit, or switch to
standby mode, or switch to Eco
Power standby.
‡ꢀ Program radio stations.
‡ꢀ Set the clock.
m SLEEP/TIMER
b OPEN/CLOSE
‡ꢀ Open or close the disc
compartment.
‡ꢀ Set the sleep timer.
‡ꢀ Set the alarm timer.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
n DSC
‡ꢀ Select a preset sound setting.
3 Get started
o DBB
‡ꢀ Turn on or off dynamic bass
enhancement.
Caution
‡ Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
p MODE/SCAN
‡ꢀ 6HOHFWꢀUHSHDWꢁVKXIÁHꢀSOD\ꢀPRGHꢂꢀ
‡ꢀ Scan FM/DAB radio stations.
q
/MENU
Always follow the instructions in this chapter in
sequence.
‡ꢀ Stop play or erase a program.
‡ꢀ Access and exit a menu.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
rear of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
r iPod/iPhone
‡ꢀ Select iPod/iPhone source.
s DAB/TUNER
‡ꢀ Select DAB/tuner source.
Placement
<RXꢀFDQꢀSODFHꢀWKHꢀXQLWꢀRQꢀDꢀÁDWꢀVXUIDFHꢀRUꢀ
mount the unit on a wall.
Mount on a wall
To wall mount the unit, see the included
separate sheet of wall mounting instructions.
Prepare the remote control
Caution
‡ Risk of explosion! Keep batteries away from
KHDWꢃꢀVXQVKLQHꢀRUꢀÀUHꢂꢀ1HYHUꢀGLVFDUGꢀEDWWHULHVꢀ
LQꢀÀUHꢂ
To insert the remote control battery:
1 Open the battery compartment.
2 Insert 2 AAA batteries (not supplied)
with correct polarity (+/-) as indicated.
3 Close the battery compartment.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Connect the power adaptor to:
‡ꢀ the DC IN jack on the main unit.
‡ꢀ the wall outlet.
3
1
2
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1 Connect the unit to the power supply.
» [AUTO INSTALL PRESS - PLAY
KEY](auto install press - play key) is
displayed.
Note
‡ If you are not going to use the remote control
for a long time, remove the batteries.
‡ Do not use old and new or different types of
batteries in combination.
2 Press
on the main unit to start
‡ Batteries contain chemical substances, so they
should be disposed of properly.
installation.
» The unit automatically stores radio
VWDWLRQVꢀZLWKꢀVXIÀFLHQWꢀVLJQDOꢀVWUHQJWKꢂ
» When all the available radio stations
DUHꢀVWRUHGꢃꢀWKHꢀÀUVWꢀSUHVHWꢀUDGLRꢀVWDWLRQꢀ
is broadcast automatically.
Connect power
Caution
‡ Risk of product damage! Ensure that the power
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
‡ Risk of electric shock! When you unplug the
AC adaptor, always pull the plug from the
socket. Never pull the cord.
Set clock
Note
‡ You can set the clock in the standby mode
‡ Before connecting the AC adaptor, ensure you
have completed all other connections.
only.
1 Press and hold PROG/CLOCK SET to
enter the clock setting mode.
» [SET CLOCK] (set clock) scrolls on
the screen.
» [Synch On] (synch on) is displayed.
2 Press
/
to select [Y] or [N].
‡ꢀ [Y]: the unit reads the DAB/RDS
time and sets the clock automatically.
‡ꢀ [N]: the unit turns off the time
synchronization.
3 Press PROG/CLOCK SETꢀWRꢀFRQÀUPꢂꢀ
4 Press
/
repeatedly to select 12 hour
or 24 hour format.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Press PROG/CLOCK SETꢀWRꢀFRQÀUPꢂꢀ
» The hour digits are displayed and begin
to blink.
4 Play
6 Press
/
to set the hour.
Play a disc
7 Press PROG/CLOCK SETꢀWRꢀFRQÀUPꢂ
» The minute digits are displayed and
begin to blink.
1 Press CD to select the disc source.
2 Press to open the disc compartment.
8 Press
/
to set the minute.
3 Insert a disc with the printed side facing
outward.
9 Press PROG/CLOCK SETꢀWRꢀFRQÀUPꢀWKHꢀ
clock setting.
4 Press to close the disc compartment.
» Play starts automatically. If not, press
.
Turn on
1 Press .
Play from USB
» The unit switches to the last selected
source.
Note
‡ Ensure that the USB device contains playable
Switch to standby
audio content.
1 Press again to switch the unit to
standby mode.
1 Insert the USB device into the
socket.
» The clock (if set) appears on the
display panel.
To switch the unit to Eco Power Standby
mode:
1 Press and hold for more than 2
seconds.
» The backlight on the display panel
turns off.
Tip
‡ The unit switches to Eco Power Standby mode
after 15 minutes in standby mode.
2 Press USB to select the USB source.
To switch between standby mode and Eco
Standby Mode:
» Play starts automatically. If not, press
.
1 Press and hold for more than 2
‡ꢀ To select a folder, press / .
‡ꢀ 7RꢀVHOHFWꢀDQꢀDXGLRꢀÀOHꢃꢀSUHVVꢀ
seconds.
/
.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Play iPod/iPhone
You can enjoy audio from iPod/iPhone through
this Micro Hi-Fi system.
Compatible iPod/iPhone
Apple iPod and iPhone models with a 30-pin
dock connector:
‡ꢀ iPod classic, iPod touch, iPod nano, iPod
5th generation (video), iPod with color
display, iPod mini
‡ꢀ iPhone, iPhone 3G, iPhone 3GS
3 Press iPod to select iPod source.
‡ꢀ To pause/resume play, press
.
Play an iPod/iPhone player
‡ꢀ To skip to a track, press
/
.
‡ꢀ To search during play, press and
hold , then release to resume
normal play.
Note
/
‡ When an iPod/iPhone player is loaded, the unit
switches to iPod source automatically.
Charge the iPod/iPhone
When the unit is connected to power, the
docked iPod/iPhone begins to charge.
1 Push to open the dock compartment.
2 Place the iPod/iPhone player in the dock.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press
stations.
5 Press ENTERꢀWRꢀFRQÀUPꢂꢀ
/
to navigate DAB+ radio
5 Listen to radio
Listen to Digital Audio
Broadcasts (DAB+)
Program DAB+ radio stations
manually
Digital Audio Broadcasting (DAB+), is a way
of broadcasting radio digitally through a
network of transmitters. It provides you with
more choice, better sound quality and more
information.
You can program a maximum of 30 preset
DAB+ radio stations.
1 Tune to a DAB+ radio station.
2 Press PRESET +/- to select a preset
number.
1 Press SOURCErepeatedly to select
3 Press and hold PROG/CLOCK SETfor
[DAB+].
two seconds.
» When you enter the DAB+ mode for
WKHꢀÀUVWꢀWLPHꢃꢀWKHꢀXQLWꢀDXWRPDWLFDOO\ꢀ
scans DAB+ radio stations.The unit
stores all available DAB+ radio stations
DQGꢀWKHQꢀEURDGFDVWVꢀWKHꢀÀUVWꢀDYDLODEOHꢀ
station.
» The preset number of the saved
station appears.
Listen to a preset DAB+ radio station
1 Press SOURCErepeatedly to select
» The last selected DAB+ radio station
[DAB+].
broadcasts automatically.
2 Press PRESET +/- to select a preset
Tip
number.
3 Press ENTERꢀWRꢀFRQÀUPꢂꢀ
‡ If no DAB+ service is available, [NO DAB
STATION] is displayed, and then [Station list]
is displayed.
Show DAB+ information
1 Tune to a DAB+ radio station.
Scan DAB+ radio stations
automatically
You can perform full scan to search for DAB+
radio stations.
1 In DAB+ mode, press MODE/SCAN.
» The unit scans all available DAB+
UDGLRꢀVWDWLRQVꢀDQGꢀEURDGFDVWVꢀWKHꢀÀUVWꢀ
available station.
2 Press repeatedly to scroll through the
following information (if available):
» Dynamic label segment (DLS)
» Program type (PTY)
» Ensemble Name
» Time
» Channel and frequency
» Bit rate and audio status
» Signal error rate
Tune to DAB+ radio station manually
1 Press DAB/TUNER repeatedly to select
Use DAB+ menu
[DAB+].
1 In the DAB+ mode, press MENU to
2 Press
/
to select [Manual Tune].
enter the DAB+ menu.
3 Press ENTERꢀWRꢀFRQÀUPꢂ
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DRC
2 Press
/
to scroll the menu options:
Dynamic range control (DRC) adds or
removes a degree of compensation for the
differences in the dynamic range between
radio stations.
‡ꢀ [Station list]
‡ꢀ [Full scan]
‡ꢀ [Manual tune]
‡ꢀ [DRC] (dynamic range control)
‡ꢀ [Prune]
‡ꢀ [DRC off] (DRC is switched off.)
‡ꢀ [DRC high] (DRC is switched on;
the default setting recommended for
noisy environment.)
‡ꢀ [DRC low] (DRC is set to half
normal level)
‡ꢀ [System]
3 To select an option, press ENTER.
4 Repeat step 2-3 if sub-option is available
under one option.
Full scan
Prune
Full scan is used to perform a wide range of
DAB+ radio search.
With this feature, you can clear all the invalid
stations from the station list.
1 In the DAB+ mode, press MENU to
1 In the DAB+ mode, press MENU to
enter the menu options.
enter the menu options.
2 Press
/
repeatedly until [Full scan] is
2 Press
/
repeatedly until [Prune] is
displayed.
displayed.
3 Press ENTERꢀWRꢀFRQÀUPꢀWKHꢀVHOHFWLRQꢂ
3 Press ENTERꢀWRꢀFRQÀUPꢀWKHꢀVHOHFWLRQꢂ
» Full scan starts automatically.
» [Y] or [N] is displayed.
Manual tune
4 Press
/
to switch between [Y] and
:LWKꢀWKLVꢀIHDWXUHꢃꢀ\RXꢀFDQꢀWXQHꢀWRꢀDꢀVSHFLÀFꢀ
channel/frequency manually. In addition to
antenna orientation for better radio reception,
the optimal reception can also be obtained
with this feature.
[N].
5 Press ENTERꢀWRꢀFRQÀUPꢂ
System
With this feature, you can:
‡ꢀ know the software version of the unit
1 In the DAB+ mode, press MENU to
1 In the DAB+ mode, press MENU to
display the “Manual tune” option.
enter the menu options.
2 Press ENTERꢀWRꢀFRQÀUPꢀWKHꢀVHOHFWLRQꢂ
» The display shows a channel and its
frequency.
2 Press
/
repeatedly until [System] is
displayed.
3 Press ENTERꢀWRꢀFRQÀUPꢂ
3 Press
/
repeatedly until the desired
» [SW version] is displayed.
channel/frequency appears.
4 Press ENTER again.
» The software version of the main unit
is displayed.
4 Press ENTERꢀWRꢀFRQÀUPꢀWKHꢀVHOHFWLRQꢂ
Tip
‡ꢀ reset DAB/FM stations
‡ You may press DISPLAY to change the service
information on the display.
1 In the DAB+ mode, press MENU to
‡ You may adjust the position of the antenna to
obtain the optimal signal strength.
enter the menu options.
2 Press
/
repeatedly until [System] is
‡ꢀ Press MENU to exit manual tune
displayed.
function.
3 Press ENTERꢀWRꢀFRQÀUPꢂꢀ
» [SW version] is displayed.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press
/
to switch to [Tuner Reset].
2 Press PROG/CLOCK SET to activate
program mode.
5 Press ENTERꢀWRꢀFRQÀUPꢂꢀ
3 Press
/
to allocate a number to
6 Press
/
to switch between [Y] and
this radio station, then press and hold
[N].
PROG/CLOCK SETꢀWRꢀFRQÀUPꢂ
‡ꢀ [Y]: reset all DAB/FM radio stations.
‡ꢀ [N]: preset radio stations remain
unchanged.
4 Repeat the above steps to program other
stations.
7 Press ENTERꢀWRꢀFRQÀUPꢂ
Tip
‡ To overwrite a programmed station, store
another station in its place.
Listen to FM radio
Tune to a radio station
Select a preset radio station
1 Press TUNER to select FM.
1 In tuner mode, press
/
to select a
2 Press
/
ꢀWRꢀWXQHꢀWRꢀDꢀVSHFLÀFꢀ
preset number.
frequency.
2 Press
/ENTERꢀWRꢀFRQÀUPꢂꢀ
» Play starts automatically.
‡ꢀ You can also press the numeric buttons
to select a preset number directly.
Tip
‡ꢀ You can press
/ENTER to switch
between mono and stereo signals.
‡ You can press MODE/SCAN to tune to
the next station with strong reception
automatically.
Tip
‡ Position the antenna as far as possible from
TV, VCR or other radiation source.
Program radio stations automatically
You can program a maximum of 30 preset
radio stations (FM).
‡ For optimal reception, fully extend and adjust
the position of the antenna.
1 In the tuner mode, press and hold
MODE/SCAN to activate automatic
program mode.
FM stations with RDS
Radio Data System (RDS) is a service that
sends additional broadcast information along
with FM stations.
If you listen to a FM station with RDS signal,
“RDS” is displayed.
» All available stations are programmed
in the order of waveband reception
strength.
» 7KHꢀÀUVWꢀSURJUDPPHGꢀUDGLRꢀVWDWLRQꢀLVꢀ
broadcast automatically.
Display RDS information
1 For an FM station with RDS, press
RDS/DISPLAY repeatedly to display
various broadcast information.
Program radio stations manually
You can program a maximum of 30 preset
radio stations (FM).
1 Tune to a radio station.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2 To resume normal play, press
MODE/SCAN repeatedly until no option
is displayed.
6 Play options
Pause/resume play
Program tracks
1 During play, press
to pause/resume
play.
Note
‡ You can program tracks only when the play
Skip to a track
stops.
You can program a maximum of 40 tracks.
For CD:
1 Press PROG/CLOCK SET to activate the
1 Press
/
to select another track.
program mode.
‡ꢀ To select a track directly, you can
also press a key on the numerical
keypad.
» [P] is displayed.
2 For MP3/WMA tracks, press
/
to
For MP3 disc and USB:
select an album.
1 Press
to select an album or a folder.
3 Press
/
to select a track, then press
PROG/CLOCK SETꢀWRꢀFRQÀUPꢂ
2 Press
/
ꢀWRꢀVHOHFWꢀDꢀWUDFNꢀRUꢀDꢀÀOHꢂ
4 Repeat steps 2 to 3 to program more
tracks.
Search within a track
1 During play, press and hold
5 Press
» During play, [P] is displayed.
‡ꢀ To erase the program, in the stop
position, press
to play the programmed tracks.
/
.
.
2 Release to resume normal play.
Display time
1 Press DISPLAY to display time.
6HOHFWꢀUHSHDWꢅVKXIÁHꢀSOD\ꢀ
options
1 During play, press MODE/SCAN
Tip
repeatedly to select a repeat option or
WKHꢀVKXIÁHꢀSOD\ꢀPRGHꢂ
‡ In Eco Standby mode, time is displayed for 90
seconds.
‡ꢀ
‡ꢀ
‡ꢀ
‡ꢀ
[
]: the current track is played
repeatedly.
[
]: all tracks in the current
album are played repeatedly.
Adjust volume level
[
]: all tracks are played
repeatedly.
1 During play, press VOL +/- to increase/
[
]: all tracks are played
decrease the volume level.
randomly.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Mute sound
7 Other features
1 During play, press to mute/unmute
sound.
Set the alarm timer
This unit can be used as an alarm clock.The
disc/radio/USB/iPod is activated to play at a
preset time.
Select a preset sound effect
1 During play, press DSC repeatedly to
select:
Note
‡ꢀ [POP] (pop)
‡ Ensure that you have set the clock correctly.
‡ꢀ [JAZZ] (jazz)
‡ꢀ [ROCK] (rock)
‡ꢀ [CLASSIC] (classic)
‡ꢀ [FLAT@ꢀꢆÁDWꢀꢇꢀDOOꢀHTXDOL]HUVꢀRIIꢈ
1 Press to switch to standby mode.
2 Press and hold SLEEP/TIMER for more
than two seconds.
» A prompt to select the source is
displayed.
Enhance bass
3 Press CD, iPod, TUNER, DAB, or USB to
1 During play, press DBB to turn on or off
select a source.
dynamic bass enhancement.
4 Press SLEEP/TIMERꢀWRꢀFRQÀUPꢂ
» If DBB is activated, [DBB] is displayed.
» The clock digits are displayed.
» The hour digits begin to blink.
5 Press
/
to set the hour.
6 Press SLEEP/TIMERꢀWRꢀFRQÀUPꢂ
» The minute digits begin to blink.
7 Press
» The timer is set and activated.
is displayed.
/
to set the minute.
»
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Set the sleep timer
8 Product
information
This unit can switch to standby automatically
after a set period of time.
1 When the unit is turned on, press
SLEEP/TIMER repeatedly to select a set
period of time (in minutes).
Note
» When sleep timer is activated, is
displayed.
‡ Product information is subject to change
without prior notice.
To deactivate sleep timer
1 Press SLEEP/TIMER repeatedly until
[OFF] (off) is displayed.
6SHFLÀFDWLRQV
» When sleep timer is deactivated,
disappears on the display.
$PSOLÀHU
Total output power 2 x 10 W RMS
Frequency
Play from an external device
response
80 Hz - 16 kHz, 3 dB
Signal to noise ratio > 60 dB
You can also listen to an external audio device
through this unit.
MP3 link input
0.5 V RMS 20 k
1 Press USB/MP3 LINK to select the MP3
link source.
Disc
Laser type
Disc diameter
Support disc
2 Connect the supplied MP3 link cable to:
Semiconductor
12 cm /8 cm
‡ꢀ the MP3 LINK jack (3.5mm) on the
unit.
‡ꢀ the headphone jack on an external
CD-DA, CD-R,
CD-RW, MP3-CD,
WMA-CD
device.
3 Start to play the device (see the device
Audio DAC
Total harmonic
distortion
24 Bits / 44.1 kHz
user manual).
< 1.5%
Frequency
response
Listen through headphone
60 Hz -16 kHz (44.1 kHz)
Signal to noise ratio > 55 dBA
1 Plug a headphone into the socket on
the unit.
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner
Tuning Range
USB playability information
FM: 87.5 - 108MHz
DAB: 174.92 -
239.20 MHz
50 KHz
Compatible USB devices:
‡ꢀ 86%ꢀÁDVKꢀPHPRU\ꢀꢆ86%ꢀꢉꢂꢊꢀRUꢀ86%ꢀꢋꢂꢋꢈ
‡ꢀ 86%ꢀÁDVKꢀSOD\HUVꢀꢆ86%ꢀꢉꢂꢊꢀRUꢀ86%ꢀꢋꢂꢋꢈ
‡ꢀ memory cards (requires an additional
card reader to work with this unit)
Tuning grid (FM)
Sensitivity
- Mono, 26dB S/N < 22 dBf
Ratio
- Stereo, 46dB S/N > 43 dBf
Ratio
Search Selectivity
Total Harmonic
Distortion
Signal to Noise Ratio >55 dB
Number of presets 30 (FM)
30 (DAB)
Supported formats:
‡ꢀ 86%ꢀRUꢀPHPRU\ꢀÀOHꢀIRUPDWꢀ)$7ꢋꢉꢃꢀ
FAT16, FAT32 (sector size: 512 bytes)
‡ꢀ MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
< 28 dBf
‡ꢀ WMA v9 or earlier
‡ꢀ Directory nesting up to a maximum of 8
levels
‡ꢀ Number of albums/ folders: maximum 99
‡ꢀ Number of tracks/titles: maximum 999
‡ꢀ ID3 tag v2.0 to v2.3
< 2%
‡ꢀ File name in Unicode UTF8 (maximum
length: 128 bytes)
Speakers
Speaker impedance
2 x 10 W, 4
Supported MP3 disc formats
General information
‡ꢀ ISO9660, Joliet
‡ꢀ Maximum title number: 999 (depending
RQꢀÀOHꢀQDPHꢀOHQJWKꢈ
‡ꢀ Maximum album number: 99
‡ꢀ Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
‡ꢀ Supported Bit-rates: 32-320 (kbps),
variable bit rates
‡ꢀ ID3 tag v2.0 to v2.3
‡ꢀ Directory nesting up to a maximum of 8
levels
AC power
100 - 240V~, 50/60Hz
Operation Power
Consumption
Standby Power
Consumption
Eco Power Standby
15 W
< 2 W
Power Consumption < 1 W
USB Direct
Dimensions
- Main Unit
(W x H x D)
Weight
Version 2.0/1.1
565 x 245 x 104 mm
2.7 kg
- Main Unit
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
9 Troubleshooting
Clean the cabinet
‡ꢀ Use a soft cloth slightly moistened with
a mild detergent solution. Do not use
a solution containing alcohol, spirits,
ammonia or abrasives.
Warning
‡ Never remove the casing of this apparatus.
Clean discs
To keep the warranty valid, never try to repair
the system yourself.
‡ꢀ When a disc becomes
dirty, clean it with a
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome).When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
cleaning cloth. Wipe the
disc from the centre out.
‡ꢀ Do not use solvents
such as benzene, thinner,
commercially available
cleaners, or antistatic spray intended for
analogue records.
Clean the disc lens
No power
‡ꢀ After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure
good play quality, clean the disc lens
with Philips CD lens cleaner or any
commercially available cleaner. Follow the
instructions supplied with cleaner.
‡
‡
‡
Ensure that the AC power plug of the
unit is connected properly.
Ensure that there is power at the AC
outlet.
To save power, the unit switches to Eco
Standby mode automatically after 15
minutes in standby mode.
No sound
‡
Adjust the volume.
No response from the unit
‡
Disconnect and reconnect the AC power
plug, then turn on the unit again.
No disc detected
‡
‡
Insert a disc.
Check if the disc is inserted with the print
side facing inward.
Wait until the moisture condensation at
the lens has cleared.
Replace or clean the disc.
8VHꢀDꢀÀQDOL]HGꢀ&'ꢀRUꢀFRUUHFWꢀIRUPDWꢀGLVFꢂ
‡
‡
‡
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control does not work
‡
%HIRUHꢀSUHVVLQJꢀDQ\ꢀIXQFWLRQꢀEXWWRQꢃꢀÀUVWꢀ
select the correct source with the remote
control instead of the main unit.
Reduce the distance between the remote
control and the unit.
Insert the battery with its polarities (+/–
signs) aligned as indicated.
Replace the battery.
‡
‡
‡
‡
Aim the remote control directly at the
sensor on the front of the unit.
&DQQRWꢀGLVSOD\ꢀVRPHꢀÀOHVꢀLQꢀ86%ꢀGHYLFH
‡
7KHꢀQXPEHUꢀRIꢀIROGHUVꢀRUꢀÀOHVꢀLQꢀWKHꢀ86%ꢀ
device has exceeded a certain limit. This
phenomenon is not a malfunction.
7KHꢀIRUPDWVꢀRIꢀWKHVHꢀÀOHVꢀDUHꢀQRWꢀ
supported.
‡
USB device not supported
‡
The USB device is incompatible with the
unit. Try another one.
Poor radio reception
‡
Increase the distance between the unit
and your TV or VCR.
Fully extend the DAB/FM antenna.
‡
Clock/timer setting erased
‡
Power has been interrupted or the power
cord has been disconnected.
Reset the clock/timer.
‡
Timer does not work
‡
‡
Set the clock correctly.
Switch on the timer.
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
DCB293_12_UM_V1.1_1016.1
W
Download from Www.Somanuals.com. All Manuals Search And Download.
|