DISCRETE SEMICONDUCTORS
DATA SHEET
book, halfpage
BGA2711
MMIC wideband amplifier
Product specification
2001 Oct 19
Supersedes data of 2001 Apr 04
Download from Www.Somanuals.com. All Manuals Search And Download.
Philips Semiconductors
Product specification
MMIC wideband amplifier
BGA2711
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134)
SYMBOL
VS
PARAMETER
DC supply voltage
CONDITIONS
RF input AC coupled
MIN.
MAX.
UNIT
−
−
−
6
V
IS
supply current
20
mA
mW
°C
°C
dBm
Ptot
Tstg
Tj
total power dissipation
storage temperature
operating junction temperature
maximum drive power
Ts ≤ 80 °C
200
+150
150
10
−65
−
PD
−
THERMAL RESISTANCE
SYMBOL
PARAMETER
CONDITIONS
VALUE
300
UNIT
Rth j-s
thermal resistance from junction to solder
point
Ptot = 200 mW; Ts ≤ 80 °C
K/W
CHARACTERISTICS
VS = 5 V; IS = 12.6 mA; f = 1 GHz; Tj = 25 °C unless otherwise specified.
SYMBOL PARAMETER CONDITIONS
IS supply current
MIN.
10
TYP.
12.6
MAX.
16
UNIT
mA
|s21|2
RL IN
RL OUT
NF
insertion power gain
return losses input
return losses output
noise figure
f = 1 GHz
f = 2 GHz
f = 1 GHz
f = 2 GHz
f = 1 GHz
f = 2 GHz
f = 1 GHz
f = 2 GHz
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
13.1
13.9
11
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
dB
dB
dB
10
dB
18
dB
13
dB
4.8
4.8
3.6
2.8
0.6
−0.7
−1.8
−4.8
−8.5
8.3
5.4
dB
dB
BW
bandwidth
at |s21|2 −3 dB below flat gain at 1 GHz
f = 1 GHz
GHz
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
PL(sat)
saturated load power
f = 2 GHz
PL 1 dB
IP3(in)
IP3(out)
load power
at 1 dB gain compression; f = 1 GHz
at 1 dB gain compression; f = 2 GHz
input intercept point
output intercept point
f = 1 GHz
f = 2 GHz
f = 1 GHz
f = 2 GHz
2001 Oct 19
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Philips Semiconductors
Product specification
MMIC wideband amplifier
BGA2711
APPLICATION INFORMATION
Figure 2 shows a typical application circuit for the
BGA2711 MMIC. The device is internally matched to 50 Ω,
and therefore does not need any external matching. The
value of the input and output DC blocking capacitors C2,
C3 should be not more than 100 pF for applications above
100 MHz. However, when the device is operated below
100 MHz, the capacitor value should be increased.
DC-block
100 pF
DC-block
100 pF
DC-block
100 pF
handbook, halfpage
input
output
MGU437
The 22 nF supply decoupling capacitor, C1 should be
located as closely as possible to the MMIC.
Fig.3 Easy cascading application circuit.
Separate paths must be used for the ground planes of the
ground pins GND1, GND2, and these paths must be as
short as possible. When using vias, use multiple vias per
pin in order to limit ground path inductance.
mixer
handbook, halfpage
from RF
circuit
to IF circuit
or demodulator
wideband
amplifier
MGU438
V
handbook, halfpage
s
oscillator
C1
V
s
RF in
RF out
RF input
RF output
Fig.4 Application as IF amplifier.
C2
C3
GND1
GND2
MGU435
Fig.2 Typical application circuit.
mixer
handbook, halfpage
to IF circuit
or demodulator
antenna
LNA
wideband
amplifier
Figure 3 shows two cascaded MMICs. This configuration
doubles overall gain while preserving broadband
characteristics. Supply decoupling and grounding
conditions for each MMIC are the same as those for the
circuit of Fig.2.
MGU439
oscillator
Fig.5 Application as RF amplifier.
The excellent wideband characteristics of the MMIC make
it and ideal building block in IF amplifier applications such
as LBNs (see Fig.4).
As a buffer amplifier between an LNA and a mixer in a
receiver circuit, the MMIC offers an easy matching, low
noise solution (see Fig.5).
mixer
handbook, halfpage
from modulation
or IF circuit
to power
amplifier
In Fig.6 the MMIC is used as a driver to the power amplifier
in part of a transmitter circuit. Good linear performance
and matched input and output offer quick design solutions
in such applications.
wideband
amplifier
MGU440
oscillator
Fig.6 Application as driver amplifier.
2001 Oct 19
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Philips Semiconductors
Product specification
MMIC wideband amplifier
BGA2711
90°
1.0
0.8
0.6
0.4
0.2
0
+1
135°
45°
+2
+0.5
+0.2
+5
100 MHz
0.2
0.5
1
2
5
180°
0
0°
3 GHz
−5
−0.2
−0.5
−2
−45°
−135°
−1
MGU441
1.0
−90°
IS = 12.6 mA; VS = 5 V; PD = −30 dBm; ZO = 50 Ω.
Fig.7 Input reflection coefficient (s11); typical values.
90°
1.0
0.8
0.6
0.4
0.2
0
+1
135°
45°
+2
+0.5
+0.2
+5
0.2
0.5
100 MHz
1
2
5
3 GHz
180°
0
0°
−5
−0.2
−0.5
−2
−45°
−135°
−1
MGU442
1.0
−90°
IS = 12.6 mA; VS = 5 V; PD = −30 dBm; ZO = 50 Ω.
Fig.8 Output reflection coefficient (s22); typical values.
5
2001 Oct 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Philips Semiconductors
Product specification
MMIC wideband amplifier
BGA2711
MGU443
MGU444
0
20
handbook, halfpage
handbook, halfpage
2
s
2
s
12
21
(dB)
(dB)
−20
15
−40
−60
−80
10
5
0
0
0
1000
2000
3000
1000
2000
3000
f (MHz)
f (MHz)
IS = 12.6 mA; VS = 5 V; PD = −30 dBm; ZO = 50 Ω.
IS = 12.6 mA; VS = 5 V; PD = −30 dBm; ZO = 50 Ω.
Fig.9 Isolation (|s12|2) as a function of frequency;
typical values.
Fig.10 Insertion gain (|s21|2) as a function of
frequency; typical values.
MGU445
MGU446
10
10
handbook, halfpage
handbook, halfpage
P
L
P
L
(dBm)
0
(dBm)
0
−10
−10
−20
−40
−20
−40
−30
−20
−10
0
−30
−20
−10
0
P
(dBm)
P
(dBm)
D
D
VS = 5 V; f = 1 GHz; ZO = 50 Ω.
VS = 5 V; f = 2 GHz; ZO = 50 Ω.
Fig.11 Load power as a function of drive power at
1 GHz; typical values.
Fig.12 Load power as a function of drive power at
2 GHz; typical values.
2001 Oct 19
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Philips Semiconductors
Product specification
MMIC wideband amplifier
BGA2711
MGU447
MGU448
10
5
handbook, halfpage
handbook, halfpage
NF
(dB)
K
4
8
6
4
2
0
3
2
1
0
0
0
1000
2000
3000
1000
2000
3000
f (MHz)
f (MHz)
IS = 12.6 mA; VS = 5 V; ZO = 50 Ω.
IS = 12.6 mA; VS = 5 V; ZO = 50 Ω.
Fig.13 Noise figure as a function of frequency;
typical values.
Fig.14 Stability factor as a function of frequency;
typical values.
Scattering parameters: IS = 12.6 mA; PD = −30 dBm; ZO = 50 Ω; Tamb = 25 °C
s11
s21
s12
s22
f
MAGNITUDE ANGLE MAGNITUDE ANGLE MAGNITUDE ANGLE MAGNITUDE ANGLE
(MHz)
(ratio)
(deg)
(ratio)
(deg)
(ratio)
(deg)
(ratio)
(deg)
100
200
0.14563
0.15253
0.18735
0.22695
0.26122
0.28776
0.30888
0.32055
0.32492
0.31849
0.30085
0.27106
0.23157
0.18594
0.13159
0.07266
−3.502
5.557
4.4867
4.4944
4.4841
4.4862
4.4985
4.5390
4.6052
4.6862
4.7929
4.9219
4.9973
5.0755
5.0668
4.9143
4.6797
4.3139
−1.843
−6.788
−15.22
−22.94
−30.57
−38.34
−46.14
−54.45
−63.29
−72.67
−83.08
−93.96
−106.1
−118.1
−129.6
−140.5
0.06220
0.06117
0.05751
0.05240
0.04744
0.04187
0.03666
0.03251
0.02903
0.02624
0.02395
0.02228
0.02134
0.02176
0.02276
0.02241
−2.939
−8.095
−16.61
−22.85
−27.72
−31.17
−32.98
−33.25
−32.38
−29.24
−26.62
−22.20
−17.95
−13.86
−12.70
−17.06
0.13029
0.12640
0.11957
0.11288
0.11286
0.12236
0.14066
0.16341
0.18689
0.20662
0.22092
0.22754
0.22679
0.21806
0.19660
0.16355
−174.50
169.58
148.02
126.58
104.24
82.570
65.815
53.911
45.122
38.894
33.706
29.699
26.622
23.868
22.060
22.273
400
10.06
600
8.206
800
2.635
1000
1200
1400
1600
1800
2000
2200
2400
2600
2800
3000
−2.465
−8.179
−13.16
−17.85
−22.43
−26.75
−31.57
−35.78
−40.38
−44.34
−41.76
2001 Oct 19
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Philips Semiconductors
Product specification
MMIC wideband amplifier
BGA2711
PACKAGE OUTLINE
Plastic surface mounted package; 6 leads
SOT363
D
B
E
A
X
y
H
v
M
A
E
6
5
4
Q
pin 1
index
A
A
1
1
2
3
c
e
1
b
p
L
p
w
M
B
e
detail X
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
A
1
UNIT
A
b
c
D
E
e
e
H
L
Q
v
w
y
p
p
1
E
max
0.30
0.20
1.1
0.8
0.25
0.10
2.2
1.8
1.35
1.15
2.2
2.0
0.45
0.15
0.25
0.15
mm
0.1
1.3
0.65
0.2
0.2
0.1
REFERENCES
JEDEC
EUROPEAN
PROJECTION
OUTLINE
VERSION
ISSUE DATE
IEC
EIAJ
97-02-28
SOT363
SC-88
2001 Oct 19
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Philips Semiconductors
Product specification
MMIC wideband amplifier
BGA2711
DATA SHEET STATUS
PRODUCT
DATA SHEET STATUS(1)
STATUS(2)
DEFINITIONS
Objective data
Development This data sheet contains data from the objective specification for product
development. Philips Semiconductors reserves the right to change the
specification in any manner without notice.
Preliminary data
Qualification
This data sheet contains data from the preliminary specification.
Supplementary data will be published at a later date. Philips
Semiconductors reserves the right to change the specification without
notice, in order to improve the design and supply the best possible
product.
Product data
Production
This data sheet contains data from the product specification. Philips
Semiconductors reserves the right to make changes at any time in order
to improve the design, manufacturing and supply. Changes will be
communicated according to the Customer Product/Process Change
Notification (CPCN) procedure SNW-SQ-650A.
Notes
1. Please consult the most recently issued data sheet before initiating or completing a design.
2. The product status of the device(s) described in this data sheet may have changed since this data sheet was
DEFINITIONS
DISCLAIMERS
Short-form specification
The data in a short-form
Life support applications
These products are not
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips
Semiconductors customers using or selling these products
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Limiting values definition Limiting values given are in
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device
at these or at any other conditions above those given in the
Characteristics sections of the specification is not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Right to make changes
Philips Semiconductors
reserves the right to make changes, without notice, in the
products, including circuits, standard cells, and/or
software, described or contained herein in order to
improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for
the use of any of these products, conveys no licence or title
under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that
these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified.
Application information
Applications that are
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make
no representation or warranty that such applications will be
suitable for the specified use without further testing or
modification.
2001 Oct 19
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Philips Semiconductors
Product specification
MMIC wideband amplifier
BGA2711
NOTES
2001 Oct 19
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Philips Semiconductors
Product specification
MMIC wideband amplifier
BGA2711
NOTES
2001 Oct 19
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Philips Semiconductors – a worldwide company
Contact information
Fax: +31 40 27 24825
© Koninklijke Philips Electronics N.V. 2001
SCA73
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
613516/02/pp12
Date of release: 2001 Oct 19
Document order number: 9397 750 08545
Download from Www.Somanuals.com. All Manuals Search And Download.
|