MMXX6050D
DVDVIDEO DIGITAL SURROUND SYSTEM
Need help? Call us!
Return
Philips representatives are ready to help you with
any questions about your new product.We can guide you
through Connections, First-time Setup, or any of the Features.
We want you to start enjoying your new product right away!
yourWarranty
Registration Card
within 10 days
Y
CALL US BEFORE YOU CONSIDER
RETURNING THE PRODUCT!
1-800-531-0039
or
Download from Www.Somanuals.com. All Manuals Search And Download.
S
Hurry!
Congratulations on your purchase,
and welcome to the “family!”
Dear Philips product owner:
Thank you for your confidence in Philips.You’ve selected one of the best-built,
best-backed products available today.And we’ll do everything in our power to
keep you happy with your purchase for many years to come.
As a member of the Philips “family,” you’re entitled to protection by one
of the most comprehensive warranties and outstanding service networks
in the industry.
What’s more, your purchase guarantees you’ll receive all the information
and special offers for which you qualify, plus easy access to accessories
from our convenient home shopping network.
And most importantly you can count on our uncompromising commitment
to your total satisfaction.
All of this is our way of saying welcome – and thanks for investing in a
Philips product.
Sincerely,
Lawrence J. Blanford
President and Chief Executive Officer
P.S. Remember, to get the most from your Philips product, you
must return your Warranty Registration Card within 10 days.
So please mail it to us right now!
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
12.
Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer or sold with
the apparatus.When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
4. Follow all instructions.
5. Do not use this apparatus near
water.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance with
the manufacturer´s instructions.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
8. Do not install near any heat sources
such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
9. Do not defeat the
safety purpose of the
15.Battery usage CAUTION –To
prevent battery leakage which may result in
bodily injury, property damage, or damage
to the unit:
polarized or
grounding-type plug.
AC Polarized
Plug
A polarized plug has two blades with one
wider than the other.A grounding type plug
has two blades and a third grounding prong.
The wide blade or the third prong are
provided for your safety. If the provided plug
does not fit into your outlet, consult an
electrician for replacement of the obsolete
outlet.
G
G
G
Install all batteries correctly, + and - as
marked on the unit.
Do not mix batteries (old and new or
carbon and alkaline, etc.).
Remove batteries when the unit is not used
for a long time.
10. Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
16.Apparatus shall not be exposed to
dripping or splashing.
17.Do not place any sources of danger
on the apparatus (e.g. liquid filled
objects, lighted candles).
11.Only use attachments/accessories
specified by the manufacturer.
18.This product may contain lead and mercury.
Disposal of these material may be regulated
due to environment considerations.
For disposal or recycling information,
please contact your local authorities
or the Electronic Industries Alliance :
EL 6475-E004: 03/12
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
Canada
Use of controls or adjustments or
performance of procedures other
than herein may result in hazardous
radiation exposure or other unsafe
operation.
English:
This digital apparatus does not exceed the
Class B limits for radio noise emissions
from digital apparatus as set out in the
Radio Interference Regulations of the
Canadian Department of Communications.
ATENCIÓN
El uso de mando o ajustes o la
ejecucción de métodos que no sean
los aquí descritos puede ocasionar
peligro de exposición a radiación.
This warning label is located on the rearside
and inside this laser product.
INVISIBLE
:
CAUTION
LASER RADIATION
WHEN OPEN. DO NOT STARE INTO BEAM.
INVISIBLE LASER RADIATIONWHEN OPEN.
:
DANGERAVOID DIRECT EXPOSURETO BEAM.
AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET
ALTTIINANAKYMATTOMAALLE LASERSATEILYLLE. ALA
VARO!
KATSO SATEESEEN.
IMPORTANT NOTE
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD.
OCH SPARREN AR URKOPPLAD. BETRAKTA EJ STRÅLEN.
VARNING!
Due to the numerous versions of new
CD-Audio copy protection or
enhanced CD-Audio protection
recently available on certain discs,
Philips is unable to guarantee that
this DVD system is fully compatible
with such new discs. Should you
have difficulty playing such CD-
Audio discs, kindly refer them to your
CD-Audio disc retailer.
or
DANGER- Invisible laser radiation when open.
AVOID DIRECT EXPOSURE TO BEAM.
‘CONSUMERS SHOULD NOTETHAT NOT ALL HIGH
DEFINITIONTELEVISION SETS ARE FULLY
COMPATIBLEWITHTHIS PRODUCT AND MAY CAUSE
ARTIFACTSTO BE DISPLAYED INTHE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDEDTHATTHE USER
SWITCHTHE CONNECTIONTOTHE ‘STANDARD
DEFINITION’ OUTPUT. IFTHERE ARE QUESTIONS
REGARDING OURTV SET COMPATIBILITYWITHTHIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
‘CONSUMERS SHOULD NOTETHAT NOT ALL HIGH
DEFINITIONTELEVISION SETS ARE FULLY
CONTACT OUR CUSTOMER SERVICE CENTER.’
COMPATIBLEWITHTHIS PRODUCT AND MAY CAUSE
ARTIFACTSTO BE DISPLAYED INTHE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDEDTHATTHE USER
SWITCHTHE CONNECTIONTOTHE ‘STANDARD
DEFINITION’ OUTPUT. IFTHERE ARE QUESTIONS
REGARDING OURTV SET COMPATIBILITYWITHTHIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
Laser
Type
Semiconductor laser GaAIAs
650nm
7mW
Wave length
Output Power
Beam divergence 60 degree
CONTACT OUR CUSTOMER SERVICE CENTER.’
Class II equipment symbol
This symbol indicates that the unit has
a double insulation system
5
Download from Www.Somanuals.com. All Manuals Search And Download.
This product incorporates copyright
protection technology that is protected by
method claims of certain U.S. patents and
other intellectual property rights owned by
Macrovision Corporation and other rights
owners. Use of this copyright protection
technology must be authorized by
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro-Logic” and the
double-D symbol are trademarks of
Dolby Laboratories. C
Macrovision Corporation, and is intended
for home and other limited viewing uses
only unless otherwise authorized by
Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
This system complies with the FCC rules,
Part 15 and with 21 CFR 1040.10.
Operation is subject to the following two
conditions:
– This device may not cause harmful
interference, and
– This device must accept any
interference received, including
interference that may cause undesired
operation.
Environmental information
All unnecessary packaging has been
omitted. We have tried to make the
packaging easy to separate into three
materials: cardboard (box), polystyrene
foam (buffer) and polyethylene (bags,
protective foam sheet).
Your system consists of materials which
can be recycled and reused if disassembled
by a specialized company. Please observe
the local regulations regarding the disposal
of packaging materials, exhausted batteries
and old equipment.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
MX6050D
12nc: 8239 300 30561
Printed In China
First connect ...
Pr/Cr
Pb/Cb
Y
Front Speaker
(left)
Front Speaker
(right)
D
Composite
video cable
A
AM loop antenna
B
Center Speaker
FM antenna
C
E
F
FRONT
CENTER
FRONT FR
RIGHT LEF
REAR SUBWOOFER
3
HT LEFT
G
Rear Speaker
(right)
Rear Speaker
(left)
Subwoofer
J
H
If yourTV has only
a singleAntenna In
jack, you will need an
accessory RF
Helpful Hints
To obtain a better picture quality effect, you can
choose to connect an extra video connection if
yourTV has the same input connector: A or B.
J
H
G
B
C
A
ANTENNA IN
modulator. The RF modulator
converts the video from the
DVD system so it can play
through theTV’sAntenna
connector. Refer to your
owner’s manual for proper
connection (refer to page 13
in the owner’s manual.)
Use this video
cable (not supplied)
If your TV has
this video input jack(s)
A
B
COMPONENT VIDEO IN
S-VIDEO
IN
Do not switch the P-SCAN to ‘ON’ position, unless you have
connected the DVD system to a Progressive ScanTV using the
Component (Pr/Cr Pb/CbY) video jacks.
P-SCAN
OFF ON
When listening toTV programs, press TV/AV button on the remote to
set the DVD system toTV/AV mode in order for the sound to be heard.
For connecting to aVCR, see page 15 in the owner’s manual for more
details.
... then play
(see next page)
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a disc
ALL
1
DVD VIDEO DIGITAL SURROUND SYSTEM
PLAY/PAUSE
PREV
STOP
NEXT
PROG VOLUME
SOURCE
PHONES
STANDBY-ON
OPEN/CLOSE
DVDVIDEO/CD PLAYER
Make sure your DVD system and
TV are connected and turned on!
3
2
1
Press DISC on the remote control.
You can also press the SOURCE button on the front panel
until “DISC” appears on the display panel.
1
No picture?
Check the AV (Audio/Video)
mode on yourTV.
2
3
Turn on theTV and select the correctVideo
In mode.
You should see the blue DVD background screen on theTV
(if no disc in the DVD system.)
*
*
Usually this channel is between the
lowest and highest channels and may
be called FRONT,A/V IN, orVIDEO.
Or, you may go to channel 1 on your
TV, then press the Channel down
button repeatedly until you see the
Video In channel.
Or, yourTV remote control may have a
button or switch that chooses different
video modes.
4
5
Press OPEN/CLOSE 0 on the front of the
DVD system and load a disc, then press
OPEN•CLOSE 0 again to close the disc tray.
Make sure the disc label is facing up. For double-sided discs,
load the side you want to play face up.
*
4
5
Press ÉÅ to start playback.
If a disc menu appears, use 3 4 1 2 buttons on the remote
to make the necessary selection, then press OK to confirm.
Or, use the numeric keypad on the remote to select features.
Follow the instructions given in the disc menu.
*
*
Do not use channel 3 or 4 on theTV
unless you are using an RF modulator.
See yourTV manual for more details.
To stop playback, press STOPÇ.
Using the DVD setup menu
➠
➠
TV SHAPE
TV SYSTEM
VIDEO OUT
SCR SAVER
DVDVIDEODIGITASLURROUND SYSTEM
PLAY/PAUSE
PREV
STOP
NEXT
PROG VOLUME
SOURCE
DIGITAL OUT
NIGHT MODE
CNTR DELAY
REAR DELAY
TEST TONE
PHONES
STANDBY-ON
OPEN/CLOSE
DVDVIDEO/CD PLAYER
1
AUDIO
SUBTITLE
DISC MENU
2
PARENTAL
PASSWORD
MENU LANG
DEFAULTS
Detailed playback features and additional functions are described in the
accompanying owner’s manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
Guía de utilización rápida
En primer lugar conecte ...
Si su televisor solamente
tiene un conector de entrada
de antena, necesitará un
Consejo útiles
Puede hacer una conexión de vídeo extra con
una de las opciones siguientes si su televisor
tiene el mismo conector de entrada : A o B.
ANTENNA IN
A Altavoz delantero (derecha)
B Altavoz delantero (izquierdo)
C Altavoz central
modulador de RF accesorio.
El modulador de RF convierte el vídeo
del sistema DVD de forma que pueda
reproducirse a través del conector de
antena del televisor. Para una conexión
correcta, consulte su manual del
Si su televisor tiene este/
estos conector(es) de
entrada de video
Utilice este/estos
cable(s) de video
(no suministrado)
D Cable de vídeo compuesto
E Antena de cuadro AM
F Antena de alambre FM
G Subwoofer
A
B
COMPONENT VIDEO IN
propietario (Consulte la página 49).
S-VIDEO
IN
H Altavoz trasero (izquierdo)
J Altavoz trasero (derecho)
P-SCAN
ON OFF
No ponga P-SCAN a la posición ‘ON’, a menos que haya conectado el
sistema DVD a un televisor de exploración progresiva utilizando los conectores
de vídeo Componente (Pr/Cr Pb/CbY).
Cuando escuche programas de televisión, pulse el botón TV/AV en el control
remoto para ajustar el sistema DVD al modo deTV/AV para que se oiga el sonido.
...y después reproduzca
Si desea conectar suVCR, véase la página 51 del manual del usuario para más detalles.
Reproducción de un disco
Asegúrese de que su sistema de DVD y su televisor estén conectados y
encendidos!
1 Pulse DISC en el control remoto.
También puede pulse SOURCE en el panel delantero hasta que en el panel de
visualización aparezca “DISC”.
¿No imagen!!
Compruebe el modo (AV/Audio/Video) en
su televisor.
2 Encienda el televisor y seleccione el modo de entrada de video correcto.
Debería ver la pantalla de fondo azul de DVD (si no hay disco en el sistema DVD).
* Normalmente, estos canales se encuentran entre los
canales más altos y más bajos y pueden llamarse
FRONT,A/V IN oVIDEO.
3 Pulse OPEN/CLOSE 0 en la parte delantera del sistema DVD y coloque
un disco, y vuelva pulsar el botón OPEN/CLOSE 0 correspondiente
para cerrar la bandeja de discos.
* O, puede ir al canal 1 de su televisor y pulsar el botón
de reducción de número de canal hasta que vea el
canal de entrada de vídeo.
Asegúrese de que la etiqueta del disco esté cara arriba. En el caso de discos de dos
caras, coloque el disco con la cara que quiere reproducir hacia arriba.
* O, el control remoto de su televisor puede tener un
botón o interruptor que seleccione diferentes modos
de video.
4 Pulse ÉÅ para iniciar la reproducción.
Si aparece un menú de disco, utilice los botones 3 4 1 2 del control remoto para
realizar la selección necesaria y después pulse OK para confirmarla. O utilice el
teclado numérico del control remoto para seleccionar funciones. Siga las instrucciones
dadas en el menú del disco.
* No utilice el canal 3 o 4 de su televisor a menos que
se utilice un modulador de RF.
* Para más detalles, consulte el manual de su televisor.
5 Para detener la reproducción, pulse STOP Ç.
Utilización del menú de configuración de DVD
Pulse
Pulse
Pulse
Pulse
para acceder al submenú.
para resaltar la selección.
para confirmarla.
regresar al nivel anterior.
Pulse
para retirar el menú.
En el manual del propietario adjunto se describen funciones de reproducción
detalladas y funciones adicionales.
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
English ------------------------------------------------ 8
Español --------------------------------------------- 43
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
General Information
Supplied accessories ............................................ 9
Care and safety information .............................. 9
Disc Operations
Playable discs ....................................................... 22
Playing discs ......................................................... 22
Using the Disc Menu ......................................... 23
Basic playback controls ..................................... 23
Resuming playback from the last
stopped point ................................................ 23
Selecting various repeat functions.................. 24
Repeat play mode ......................................... 24
Repeating a section within a
chapter/track (DVD/VCD/CD) ................. 24
Program favorite tracks
(audio CDs andVCDs) ..................................... 24
Clearing the program .................................. 24
Using the menu bar to program ..................... 25
Playing MP3/Picture disc (Kodak, JPEG) ........ 25
Connections
Step 1: Set up the speakers .............................. 10
Step 2: Placing the speakers and subwoofer 10
Step 3: Connecting speakers and subwoofer 11
Step 4: ConnectingTV ....................................... 12
Using CompositeVideo jack ...................... 12
Using ComponentVideo jack
(Pr/Cr Pb/CbY)............................................. 12
Using S-Video jack ........................................ 13
Using an accessory RF modulator ............ 13
Step 5: Connecting FM/AM antennas............. 14
Step 6: Connecting the power cord............... 14
DVD Setup Menu Options
Connections (optional)
Using the menu bar ........................................... 26
Using the Setup Menu ....................................... 27
Setting the video output ............................. 27
Screen saver - turning on/off...................... 28
Setting the digital output ............................ 28
Night mode- turning on/off ........................ 29
Restoring the original settings ................... 29
Restricting playback by parental control . 30
Changing the password ............................... 31
Connecting aVCR or Cable/Satellite Box .... 15
Viewing and listening to the playback ...... 15
Using theVCR for recording DVD
playback........................................................... 15
Connecting digital audio equipment .............. 15
Digital Recording .......................................... 15
Functional Overview
Main unit and remote control ......................... 16
Control buttons available on the
remote only ................................................... 17
Tuner Operations
Tuning to radio stations .................................... 32
Presetting radio stations ................................... 32
Automatic presetting ................................... 32
Manual presetting ......................................... 32
Selecting a preset radio station....................... 32
Deleting a preset radio station.................. 32
Getting Started
Step 1: Inserting batteries into the
remote control ................................................... 18
Using the remote control to operate
the system ...................................................... 18
Step 2: Setting theTV ........................................ 18
Selecting the color system that
Other Functions
Sound Control .................................................... 33
Selecting surround sound ........................... 33
Selecting digital sound effects .................... 33
Volume Control .................................................. 33
Dimming system’s display screen .................... 33
Using the remote to operate ‘Philips’
corresponds to yourTV.............................. 19
Setting theTV shape .................................... 19
Step 3: Setting the speakers ............................. 20
TestTone - turning on/off ........................... 20
Adjusting the delay time.............................. 20
Adjusting the speaker output levels ......... 20
Step 4: Setting language preferences .............. 21
On-screen display (OSD) language........... 21
Audio, Subtitle and Disc Menu language.. 21
television ............................................................... 34
Setting the Sleep timer ..................................... 34
Specifications .......................................................... 35
Troubleshooting........................................... 36–37
Glossary ......................................................................... 38
LimitedWarranty.............................................. 39
8
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
Supplied accessories
Care and safety information
Avoid high temperatures, moisture,
water and dust
Composite video
cable (yellow)
– Do not expose the system, batteries
or discs to humidity, rain, sand or
excessive heat (caused by heating
equipment or direct sunlight.) Always
keep the disc tray closed to avoid getting
dust on the lens.
Audio cable
(white, red)
Avoid condensation problem
– The lens may cloud over when the
player is suddenly moved from cold to
warm surroundings, making it impossible
to play a disc. Leave the player in the
warm environment until the moisture
evaporates.
FM wire antenna
AM loop antenna
Do not block the vents
– Do not operate the DVD system in an
enclosed cabinet and allow about 10 cm
(4 inches) of free space all around the
player for adequate ventilation.
10 cm
(4 inches)
10 cm
(4 inches)
PHILIPS
10 cm
(4 inches)
DVD Home Cinema System
Care of disc
Remote Control
and two AA
batteries
(12nc: 3139 238 04481)
DVD MENU
– To clean a CD, wipe it
in a straight line from the
center toward the edge
using a soft, lint-free
cloth. Do not use
cleaning agents, as they
may damage the disc.
– Write only on the printed side of a
CD-R/CD-RW and only with a soft felt-
tipped pen.
– Handle the disc by its edge, do not
touch the surface.
speaker brackets
and screws
(4x)
Care of the cabinet
– Use a soft cloth slightly moistened
with a mild detergent solution. Do not
use a solution containing alcohol, spirits,
ammonia or abrasives.
Finding a suitable location
– Place the player on a flat, hard, stable
surface.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Step 1: Set up the speakers
Step 2: Placing the speakers
and subwoofer
Front Speaker
(Left)
1
Center speaker
and DVD system
Front Speaker
(Right)
2
1
bracket
screws
4
3
3
Subwoofer
Rear Speaker
(Right)
Rear Speaker
(Left)
You can choose to hang the speakers on
the wall. Attach the supplied bracket
firmly to the rear of speakers using the
supplied screws. Then mount a screw
(not supplied) on the wall where the
speaker is to be hung and hook the
speaker securely onto the mounted
screw.
For best possible surround sound, all the
speakers (except subwoofer) should be
placed at the same distance from the
listening position.
1 Place the front left and right speakers at
equal distances from theTV and at an
angle of approximately 45 degrees from
the listening position.
2 Place the center speaker above theTV or
the DVD system so that the center
channel’s sound is localized.
CAUTION!
You should get a qualified person to
attach the brackets to the wall. DO
NOT do it by yourself to avoid
unexpected damage to the
equipment or injury to personnel.
3 Place the rear speakers at normal
listening ear level facing each other or
hang on the wall.
4 Place the subwoofer on the floor near
Helpful Hints:
– The rear speakers are labelled as REAR L
(left) or REAR R (right).
theTV.
– The front speakers are labelled as
FRONT L (left) or FRONT R (right).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Step 3: Connecting speakers
and subwoofer
Front Speaker Front Speaker
(Left)
(Right)
Center
Speaker
FRONT FRONT
RIGHT LET
REAR SUBWOOFER
RIGHT LEFT
FRONT
CENTER
3
Subwoofer
Rear Speaker Rear Speaker
(Right) (Left)
Connect the supplied speaker systems
using the fixed speaker cables by
matching the colors of the jacks and
speaker cables.
Helpful Hint:
– Ensure that the speaker cables are
correctly connected. Improper connections
may damage the system due to short-circuit.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Step 4: ConnectingTV
Option 1
Option 2
1
OOFER
OOFER
2
3
2
3
1
IMPORTANT!
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of yourTV.
The progressive scan video quality is
only possible when using Pr/Cr Pb/CbY,
and a progressive scanTV is required.
– Connect the DVD system directly
to theTV.
Using ComponentVideo jacks
(Pr/Cr Pb /Cb Y)
1 Use a component video cables (red/blue/
green - not supplied) to connect the
DVD system’s Pr/Cr Pb/CbY jacks to
the corresponding Component video
input jacks (or labeled as Pr Pb Y or
YUV) on theTV.
Using CompositeVideo jack
1 Use the supplied composite video cable
(yellow) to connect the DVD system’s
VIDEO OUT jack to the video input
jack (or labeled as A/V In, CVBS,
Composite or Baseband) on theTV.
2 To hear theTV channels through this
DVD system, use the supplied audio
cables (white/red) to connect AUDIO
IN-TV jacks to the corresponding
AUDIO OUT jacks on theTV.
2 To hear theTV channels through this
DVD system, use the supplied audio
cables (white/red) to connect AUDIO
IN-TV jacks to the corresponding
AUDIO OUT jacks on theTV.
3 If you are using a Progressive ScanTV
(TV must indicate Progressive Scan or
ProScan capability), set the P-SCAN
switch to‘ON’. Otherwise,set it to ‘OFF.’
3 Set the P-SCAN switch to ‘OFF.’
Helpful Hint:
– You have to power off the DVD system or
switch to standby mode before changing the
P-SCAN switch setting.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Option 3
Option 4
ANT IN
RF coaxial cable toTV
Back of RF Modulator
(example only)
2
INT IN
TO TV
AUDIO IN
VIDEO
IN
R
L
CH3 CH4
Antenna or
CableTV signal
3
1
OOFER
REAR SUBWOOFER
LEFT
1
3
2
4
IMPORTANT!
IMPORTANT!
If S-Video is used for DVD playback
connection, the system’sVIDEO
OUT setting will need to be changed
accordingly. Details are on page 27.
If yourTV only has a singleAntenna In
jack (labeled as 75 ohm or RF In), you
will need an RF modulator in order to
view DVD playback on theTV. See
your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
Using S-Video jack
1 Use an S-video cable (not supplied) to
connect the DVD system’s S-VIDEO
OUT jack to the S-Video input jack
(or labeled asY/C or S-VHS) on theTV.
Using an accessory RF modulator
1 Use the supplied composite video cable
(yellow) to connect the DVD system’s
VIDEO OUT jack to the video input
jack on the RF modulator.
2 To hear theTV channels through this
DVD system, use the supplied audio
cables (white/red) to connect AUDIO
IN-TV) jacks to the corresponding
AUDIO OUT jacks on theTV.
2 Use an RF coaxial cable (not supplied) to
connect ANTENNA OUT orTOTV jack
on the RF modulator to the ANTENNA
IN jack on the TV.
3 Set the P-SCAN switch to ‘OFF.’
3 Connect the Antenna or CableTV
service signal to the ANTENNA IN or
RF IN jack on the RF modulator. (It may
have been connected to yourTV
previously. Disconnect it from theTV.)
4 Set the P-SCAN switch to ‘OFF.’
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Step 5: Connecting FM/AM
antennas
Step 6: Connecting the
power cord
fix the claw into
AM
antenna
the slot
FRONT FRONT FRONT REAR REAR SUBWOOFER
RIGHT LEFT CENTER RIGHT LEFT
1
➠
FM
antenna
2
~
AC MAINS
Power Outlet
1 Connect the supplied AM loop antenna
to the AM jack. Place the AM loop
antenna on a shelf or attach it to a stand
or wall.
After everything is connected
properly, plug the AC power cord
into the power outlet.
Never make or change any connections
with the power switched on.
2 Connect the supplied FM antenna to the
FM (75Ω) jack. Extend the FM antenna
and fix its ends to the wall.
Helpful Hint:
– Refer to the type plate on the rear or
bottom of the system for identification and
supply ratings.
For better FM stereo reception, connect
an external FM antenna (not supplied.)
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far as possible
from yourTV,VCR or other radiation source
to prevent unwanted interference.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (optional)
Connecting aVCR or
Cable/Satellite Box
Connecting digital audio
equipment
DIGITAL IN
1
OUT
IN
TO TV
VIDEO
AUDIO
VCR or Cable/
Satellite Box
S-VIDEO
IN
(for example)
CD Recorder
3
4
2
FRONT FRONT FRONT REAR REAR SUBWOOFER
RIGHT LEFT CENTER RIGHT LEFT
FRONT FRONT FRONT REAR REAR SUBWOOFER
RIGHT LEFT CENTER RIGHT LEFT
Viewing and listening to the playback
Digital Recording
G Connect the DVD system’s DIGITAL
OUT-COAXIAL jack to the DIGITAL
COAXIAL IN jack on a digital recording
device (such as Dolby Digital decoder,
CD recorder.)
1 Connect theVCR or Cable/Satellite Box
to theTV as shown.
2 Connect the DVD system’s AUDIO IN-
AUX jacks to the AUDIO OUT jacks on
theVCR or cable/satellite box.
Before starting operation, set the
DIGITAL OUTPUT according to the
audio connection. (See page 28 “Setting
the digital output”.)
Before starting operation, press AUX on
the remote to select “AUX” in order to
activate the input source.
Using theVCR for recording DVD
playback
Helpful Hints:
– Some DVDs are copy-protected. You
cannot record the disc through aVCR or
digital recording device.
– Always refer to the owner’s manual of the
other equipment for complete connection
and usage details.
3 Connect the DVD system’s VIDEO OUT
jack to theVIDEO IN jack on theVCR.
4 Connect the DVD system’s LINE OUT
jacks to theAUDIO IN jacks on theVCR.
This will allow you to make analog stereo
(two channel, right and left) recordings.
To view DVD playback while
recording, you must connect the DVD
system to yourTV using S-VIDEO (as
shown above) or Component
(Pr/Cr Pb/Cb Y) video connection.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
Main unit and remote control
2
3
4
7
89
0
!
1
5
6
1 STANDBY ON
9 PROG
–
Switches to standby mode or turns on
the system.
–
DISC: starts programming. (see page
24)
–
TUNER: starts manual preset
programming. (see page 32)
2 Disc tray
3 OPEN/CLOSE 0 (DISC mode only)
0 VOLUME (VOL +-)
Adjusts the volume level.
–
Opens/Closes the disc tray.
–
4 System display panel
! PHONES
–
Plugging in the headphones jack.
5 ÉÅ PLAY/PAUSE
The speakers output will be cancelled.
–
DISC: starts/pauses playback. (see pages
22, 23)
6 S PREV / TNEXT
–
–
–
DISC: *searches backward/forward or
selects a track. (see page 23)
TUNER: tunes the radio frequency
up/down. (see pages 32)
TV: selects previous/next channel on
PhilipsTV (on remote only.)
7 Ç STOP
–
–
Exits an operation.
DISC: stops playback or clears a program.
(see page 23, 24)
–
TUNER: *erases a preset radio station
(see page 32).
8 SOURCE
–
Selects the relevant active mode :TV,
DISC,TUNER (FM/AM) or AUX.
* = Press and hold the button for more than two seconds.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
^ SOUND
Selects a sound effect. (see page 33)
Control buttons available on the
remote only
–
& REPEAT
Selects various repeat modes. (see page
24)
–
(≥
8
* REPEAT A-B
–
Repeats a specific section on a disc.
(see page 24)
(§
(0
( SUBW +-
@
#
$
–
–
–
–
Adjusts subwoofer’s sound level.
DVD MENU
REAR +-
Adjusts rear speakers’ sound level.
∞
$
6
CENTER +-
Adjusts center speaker’s sound level.
(6
5
7
%
^
&
*
(≤
(£
(™
(¡
TVVOL +-
AdjustsTV volume (PhilipsTV only.)
(see page 34)
)
) SLEEP
–
(
Sets the sleep timer function. (see page 34)
¡ DIM
–
Selects different levels of brightness for
display panel. (see page 33)
™ NIGHT (DVD mode only)
–
Optimizes the dynamic of the sound
output (see page 29)
@ DISC MENU
Enters disc contents menu. (see page 23)
–
£ MUTE
–
Mutes or restores the volume.
# SYSTEM MENU (DISC mode only)
–
Enters or exits system setup menu.
(see pages 26–27)
≤ RESUME
–
Continues disc playback after an
interruption. (see page 23)
$ 1234
–
–
Selects movement direction in the menu.
Use 12 to select a preset radio station.
(see page 32)
∞ OK
–
Confirms a selection.
§ Numeric Keypad (0-9)
% SURROUND
–
–
–
Enters a track/title number of the disc.
Enters a number of a preset radio station.
Selects multichannel surround (Dolby
Digital, Dolby Pro Logic or Dolby Pro
Logic II) or stereo mode. (see page 33)
≥ B
–
–
Switches to standby mode.
InTV mode, switches PhilipsTV on/off.
* = Press and hold the button for more than two seconds.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 1: Inserting batteries
into the remote
control
Step 2: Setting theTV
IMPORTANT!
Make sure you have completed all
the necessary connections. (See pages
12–13 “ConnectingTV”.)
3
1
1 Press SOURCE control until “DISC”
appears on the display panel (or press
DISC on the remote.)
2
2 Turn on theTV and set to the correct
video-in channel. You should see the blue
DVD background screen on theTV.
➜ Usually this channel is between the
lowest and highest channels and may be
called FRONT,A/V IN, orVIDEO. See
yourTV manual for more details.
➜ Or, you may go to channel 1 on your
TV, then press the Channel down button
repeatedly until you see theVideo In
channel.
1 Open the battery compartment.
2 Insert two batteries type R06 orAA,
following the indications (+-) inside
the compartment.
3 Close the cover.
Using the remote control to
operate the system
1 Aim the remote control
➜ Or, theTV remote control may have a
button or switch that chooses different
video modes.
➜ Or, set theTV to channel 3 or 4 if you
are using an RF modulator.
PLAY/PAUSE
directly at the remote
sensor (iR) on the front
panel.
2 Select the source you
wish to control by
pressing one of the
source select buttons on
the remote control (for
exampleTV,TUNER.)
DVD MENU
3 Then select the desired
function (for example
ÉÅ, S, T).
CAUTION!
– Remove batteries if they are
exhausted or if the remote is not to
be used for a long time.
– Do not use old and new or
different types of batteries in
combination.
– Batteries contain chemical
substances, so they should be
disposed of properly.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Selecting the color system that
corresponds to yourTV
Setting theTV shape
Set the aspect ratio of the DVD Player
according to theTV you have connected.
The format you select must be available
on the disc. If it is not, the setting forTV
display will not affect the picture during
playback.
In order for a DVD to play on this DVD
system, the color system of the DVD, the
TV and the DVD player should match.
Before changing theTV system, ensure
that yourTV supports the selected color
system.
1 In disc mode, press SYSTEM MENU.
➜ Use the 1234keys on the remote
to navigate in the menu.
1 In disc mode, press SYSTEM MENU.
➜ Use the 1234keys on the remote
to navigate in the menu.
2 Highlight
icon and press 4.
2 Highlight
icon and press 4.
Move to
and press 2.
Move to
and press 2.
Move to {TV SHAPE} and press 2.
Move to {TV SYSTEM} and press 2.
TV SHAPE
TV SYSTEM
VIDEO OUT
SCR SAVER
4:3 PS
4:3LB
16:9
TV SHAPE
TV SYSTEM
VIDEO OUT
AUTO
NTSC
PAL
SCR SAVER
SET TV DISPLAY MODE
SET TV STANDARD
4:3 PS (PanScan) –
Select this if you have
a conventionalTV and
want both sides of the
picture to be trimmed
AUTO – Select this if the connectedTV
is compatible with both NTSC and PAL
(multi-system.) The output format will be
in accordance with the video signal of the
disc.
or formatted to fit yourTV screen.
NTSC – Select this if the connectedTV
has the NTSC system. It will change the
video signal of a PAL disc (VCD only) and
output it to NTSC format.
4:3 LB (letterbox) –
Select this if you have a
conventionalTV. In this
case, a wide picture with
black bands on the upper and lower
portions of theTV screen will be
displayed.
PAL – Select this if the connectedTV has
the PAL system. It will change the video
signal of an NTSC disc and output it to
PAL format.
16:9 – Select this if
you have a wide-
screenTV.
3 Press 34to select a setting and press
OK to confirm.
➜ Follow the instructions show on the
TV to confirm the selection (if any).
➜ If a blank/distortedTV screen appears,
wait for 15 seconds for auto recovery.
3 Press 34to select a setting and press
OK to confirm.
To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
TIPS:
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
{CNTR DELAY} – Select this to set the
delay time in relation to the listening
position/distance for the center speaker
(5ms, 3ms, 2ms, 1ms or OFF).
Step 3: Setting the speakers
You can adjust the delay time (center and
rear speakers only) and volume level for
individual speakers. These adjustments let
you optimize the sound according to
your surroundings and setup.
{REAR DELAY} – Select this to set the
delay time in relation to the listening
position/distance for rear speakers (15ms,
12ms, 9ms, 6ms, 3ms or OFF).
TestTone -Turning on/off
5 Press 1 2 to adjust the settings that
If you have turned on the test tone, the
test signal will be automatically generated
to help you judge the sound level of each
speaker.
best suit your surround sound needs.
6 Press OK to confirm.
Helpful Hint:
– Use longer delay time settings when the
rear speakers are closer to the listener than
the front speakers.
1 In disc mode, press SYSTEM MENU.
➜ Use the 1234keys on the remote
to navigate in the menu.
2 Highlight
icon and press 4.
Adjusting the speaker output levels
Move to
and press 2.
You can adjust the rear speakers, center
speaker and subwoofer output levels by
comparing the sound from the front
speakers.
Move to {TESTTONE} and press 2.
DIGITAL OUT
NIGHT MODE
CNTR DELAY
REAR DELAY
TEST TONE
OFF
ON
TEST TONE
3 Press 34to select a setting.
Adjusting the delay time
4 Press 34to highlight one of the options
below at a time, then press 2.
G Press the respective buttons on the
remote (REAR +-, CENTER +-
and SUBW +-) to adjust the output
level between -15dB ~ 10dB.
DIGITAL OUT
NIGHT MODE
CNTR DELAY
OFF
5ms
REAR DELAY
Helpful Hint:
TEST TONE
– If you have selected Stereo mode,
adjusting the center and rear speakers’
volume level will have no effect.
SET CENTER DELAY
To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
TIPS:
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 4: Setting language
preferences
Audio, Subtitle and Disc menu
language
1 In disc mode, stop playback and press
SYSTEM MENU.
You can select your preferred language
settings so that this DVD system will
automatically switch to the language for you
whenever you load a disc. If the language
selected is not available on the disc, the
disc’s default setting language will be used
instead. The OSD (on-screen display)
language for the system menu will remain
as you set it, regardless of various disc
languages.
➜ Use the 1234keys on the remote
to navigate in the menu.
2 Highlight
icon and press 4.
Move to
and press 2.
Move to highlight one of the options
below at a time, then press 2.
– {AUDIO} (disc’s soundtrack)
– {SUBTITLE} (disc’s subtitles)
– {DISC MENU} (disc’s menu)
On-screen display (OSD) language
1 In disc mode, press SYSTEM MENU.
➜ Use the 1234keys on the remote
to navigate in the menu.
AUDIO
SUBTITLE
DISC MENU
ENGLISH
ENGLISH
ENGLISH
2 Highlight
icon and press 4.
Move to
and press 2.
GOTO LANGUAGE SETUP PAGE
Move to {MENU LANG} and press 2.
3 Press 34to select a language and press
OK to confirm.
PARENTAL
4 Repeat steps 2~3 for other settings.
PASSWORD
ENGLISH
FRENCH
SPANISH
MENU LANG
DEFAULTS
SET OSD LANGUAGE
3 Press 34to select a language and press
OK to confirm.
To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
TIPS:
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
IMPORTANT!
Region Codes
–
If the inhibit icon (or X)
appears on theTV screen
when a button is pressed, it
DVDs must be labeled for ALL
regions or for Region 1 in order
to play on this DVD system. You
cannot play discs that are labeled
for other regions.
ALL
means the function is not available
on the current disc or at the current
time.
1
Helpful Hints:
– DVD discs and players are
designed with regional restrictions.
Before playing a disc, make sure the
disc is for the same zone as your
player.
– Do not push on the disc tray or
put any objects other than discs on
the disc tray. Doing so may cause
the disc player to malfunction.
– It may not be possible to play CD-R/RW in
all cases due to the type of disc or condition
of the recording.
– If you are having trouble playing a certain
disc, remove the disc and try a different one.
Improperly formatted discs will not play on
this DVD system.
Playing discs
Playable discs
1 Press SOURCE control until “DISC”
appears on the display panel (or press
DISC on the remote.)
Your DVD home cinema system will
play:
– Digital Versatile Discs (DVDs)
– Video CDs (VCDs)
– SuperVideo CDs (SVCDs)
– Audio Compact Discs (CDs)
– MP3 discs, picture (Kodak, JPEG) files
on CD-R(W)
2 Turn on theTV power and set to the
correctVideo In channel. (See page 18
“Setting theTV”.)
➜ You should see the blue DVD
background screen on theTV.
– JPEG/ISO 9660 format
3 Press the OPEN/CLOSE 0to open the
disc tray and load a disc, then press the
button again to close the disc tray.
➜ Make sure the disc label is facing up.
For double-sided discs, load the side you
want to play face up.
– Maximum 12 characters display
– Supported sampling frequencies :
32 kHz, 44.1 kHz, 48 kHz
– Supported Bit-rates : 32~256 (kbps),
variable bit rates
4 Press ÉÅ to start playback.
➜ If a disc menu shows on theTV, see
next page on “Using the Disc Menu.”
➜ If the disc is locked by parental control,
you must enter your four-digit password
(see page 30–31.)
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
TIPS:
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
Basic playback controls
Using the Disc Menu
Depending on the disc, a menu may appear
on theTV screen once you load in the disc.
Pausing playback
G Press ÉÅ.
➜ To resume normal playback, press
ÉÅ again.
To select a playback feature or item
G Use the 1234keys or numeric
keypad (0-9) on the remote, then press
OK to start playback.
Selecting another track/chapter
G Press S/ Tor use the numeric
keypad (0-9) to key in a track/chapter
number.
To access the menu
G Press DISC MENU on the remote.
➜ If repeat mode is active, pressing S
/ T will replay the same track/chapter.
ForVCDs with Playback Control
(PBC) feature (version 2.0 only)
Searching backward/forward
G Press and hold S/ T, then press
ÉÅ to resume normal playback.
➜ While searching, pressing and holding
S/ Tagain will increase the
search speed.
G During playback, pressing DISC MENU
will return to the menu screen (if PBC is
on.)
➜ Use S/ Tto select a play
option and press OK to confirm or use
the numeric keypad (0-9).
Stopping playback
G Press Ç.
Resuming playback from the last
stopped point (DVD/VCD/CD)
G When play is stopped and the disc has
not been ejected, press RESUME.
To cancel the resume mode
G When play is stopped, press Ç again.
Helpful Hints:
– Open the disc tray or disconnect the DVD
system from the power supply will cancel the
resume option.
– ForVCD disc, pressing RESUME button will
turn off the PBC mode and playback will
start from the beginning.
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
TIPS:
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
Selecting various repeat
functions
Program favorite tracks
(audio CDs andVCDs)
You can play the contents of the disc in
the order you want by programming the
order of the tracks to be played. Up to 99
tracks can be stored.
Repeat play mode
G While playing a disc, press REPEAT to
select various repeat mode.
➜ "REPEAT” icon will appear on the
display, except REPEAT OFF mode.
1 Stop playback, then press PROG on the
front panel to enter program mode.
DVD
2 Use the numeric keypad (0-9) to enter
a valid track number.
CHAPTER REPEAT ON ™
TITLE REPEAT ON ™ REPEAT-OFF
➜ "FULL" will appear if you have
programmed 99 tracks.
VCD/SVCD/CD
REPEAT-ONE (repeat the current
track) ™ REPEAT-ALL ™
REPEAT-OFF
3 Press OK to store the track.
4 Repeat steps 2~3 to select other
tracks.
MP3
REPEAT-ONE ™ REPEAT-ALBUM ™
5 Press ÉÅ to start program playback.
REPEAT-ALL ™ REPEAT-OFF
6 Press Ç to stop playback or exit
program mode.
Helpful Hint:
– ForVCD, repeat playback is not possible if
the PBC mode is switched on.
Clearing the program
G Stop playback, then press the Ç again.
Repeating a section within a
chapter/track
➜ "PROG CLR" appears.
Helpful Hints:
1 While playing a disc, press REPEAT A-B
– If the DVD system is discoonected from
the power supply, it will erase the program.
– ForVCD, the program option is only
possible if the PBC mode is turned off.
at the starting point.
2 Press REPEAT A-B again at the point to
end the section.
➜ The section A and B can be set only
within the same chapter/track.
➜ The section will now repeat
continuously.
3 Press REPEAT A-B again to resume
normal playback.
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
TIPS:
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
Using the menu bar to
program
Playing MP3/Picture disc
(Kodak, JPEG)
IMPORTANT!
IMPORTANT!
You have to turn on yourTV and set
to the correctVideo In channel. (See
page 18 “Setting theTV”.)
You have to turn on yourTV and set
to the correctVideo In channel. (See
page 18 “Setting theTV”.)
1 Load an MP3/Picture (Kodak, JPEG) disc.
➜ The disc reading time may exceed
30 seconds due to the complexity of
the directory/file configuration.
1 Stop playback, then press SYSTEM
MENU.
➜ The menu bar will appear across the
top of theTV screen.
2 Playback will start automatically.
➜ The album/picture menu appears on
theTV screen. If not, press DISC MENU
on the remote.
2 Press 12to select
and press 4to
enter the program menu.
3 Use 1234keys to select a desired
album, then press OK to open the folder
(for MP3 disc only.)
PROGRAM P 00 : 00
3 Use the numeric keypad (0-9) to enter
the track number to be programmed.
➜ "FULL" will appear if you have
programmed 99 tracks.
➜ The title menu appears on theTV
screen.
4 Use 1234keys to select a desired
4 Press ÉÅ to start program playback.
title, then press OK to start playback.
G You can also use the numeric keypad
To clear the program
G Stop playback, then press Çagain.
(0-9) to enter your choice.
During playback, you can;
G Press S / T to select another title/
picture in the current folder.
G Use 1234keys to rotate/flip the
picture files.
G Press ÉÅ to pause/resume playback.
5 To stop playback, press Ç.
Helpful Hints:
– Due to the recording nature of Digital Audio
MP3 (DAM), only digital audio music will play.
– It is normal to experience an occasional
“skip” while listening to your MP3 discs.
– It may not be possible to play certain MP3
or JPEG disc due to the configuration and
characteristics of the disc or condition of the
recording.
– For multi-session discs with different
formats, only the first session will be available.
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
TIPS:
25
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu Options
SUBTITLE
Select a subtitle language available on the DVD.
Using the menu bar
You can continue a number of operations
directly via the multiple menu bars on the
TV screen without interrupting the disc
playback. The exception is when you
AUDIO
DVD : Select an audio soundtrack language available
on the DVD.
VCD : Select audio channels : LEFT VOCAL,
RIGHT VOCAL, MONO LEFT,
MONO RIGHT or STEREO.
enter
(SETUP MENU), after which the
SLOW MOTION
playback will pause.
Select a slow playback speed. The volume will be
muted. To resume normal playback, press ÉÅ.
DVD : SF x1/2, SF x1/4, SF x1/8.
SR x1/2, SR x1/4, SR x1/8, OFF.
VCD : SF x1/1, SF x1/2, SF x1/3, OFF.
(SF - Slow Forward, SR- Slow Rerverse)
DVD MENU
,
FAST REVERSE (FR)
DVD / MP3 : FR x2, FR x4, FR x6, FR x8, OFF.
VCD / CD : FR x1, FR x2, FR x3, FR x4, OFF.
FAST FORWARD (FF)
DVD / MP3 : FF x2, FF x4, FF x6, FF x8, OFF.
VCD / CD : FF x1, FF x2, FF x3, FF x4, OFF.
Select a search speed (FR - backward, FF - forward).
The volume will be muted. To resume normal
playback, press ÉÅ.
1 In disc mode, press SYSTEM MENU.
➜ The menu bar will appear across the
top of theTV screen.
STATUS
Allows viewing of the current status of the disc
.
The information will vary depending on the disc
format.
Available on DVD only
TITLE SEARCH (TITLE XX:YY")
Select a Title for playback to begin.
CHAPTER SEARCH (CHAPTER XX:YY)
Select a Chapter for playback to begin.
"XX" - current title/chapter number.
"YY" - total number of title/chapter.
Use the numeric keypad (0-9) to change the
"XX" number, then press OK.
2 Use 1234keys on the remote to
navigate in the menu.
➜ Press 12to move through the menu bar.
➜ Press 4to enter the selection. If there
are multiple choices available, press 4
repeatedly to select.
TIME SEARCH (TIME __:__:__)
Use the numeric keypad (0-9) to enter the
time (hours, minutes and seconds) at which you want
playback to begin (for DVD and VCD with PBC-OFF
only)
.
3 Press SYSTEM MENU again to remove
ZOOM
Select an enlarge picture ratio : x1.5, x2 or x4.
Use 1234keys to move within the enlarged
picture on the TV. To resume normal playback,
select 'ZOOM OFF' from the menu.
the menu.
IMPORTANT!
ANGLE (for DVD only)
– Some operations may be different
or restricted, depending on the disc
format. Refer to the jacket or case
of the disc you are playing.
– Changing the Subtitle Language
and Audio Language from the menu
bar will only apply to the current
disc, it will not change the default
preset.
Select to view the same scene from different angles
if the DVD is recorded with multiple angles.
STEP FORWARD
Select to advance the still picture one frame
forward. To resume normal playback, press ÉÅ.
PBC ON/OFF (for VCD 2.0 with PBC feature)
Select between PBC On and Off.
'PBC OFF' - the playback will start automatically.
'PBC ON' - the disc menu (if available) will appear
on the TV. Use the numeric keypad (0-9) to
enter your choice.
PROGRAM
Stop playback, then select this to enter the program
menu (see page 25 "Using the menu bar to program".)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu Options
Setting the video output
Using the Setup Menu
Choose the type of video output that
matches the video connection between
the DVD system and yourTV.
This DVD setup is carried out via theTV,
enabling you to customize the DVD system
to suit your particular requirements.
Stop playback, then follow the steps of
“Using the Setup Menu” and select :
DVD MENU
> VIDEO OUT
,
4
TV SHAPE
TV SYSTEM
VIDEO OUT
S-VIDEO
PR PB Y / SCART
SCR SAVER
1 In disc mode, press SYSTEM MENU.
➜ Playback will pause.
SET VIDEO OUTPUT
2 Highlight
icon and press 4to enter
S-VIDEO
Select this if you have connected the DVD
system to yourTV using the S-Video jack.
the setup menu. Then press 34to
select one of the setup menu options and
press 2to enter the menu.
PR PB Y / SCART
Select this if you have connected the
DVD system to yourTV using component
video jacks. (SCART – this feature is not
available for this model.)
SETUP MENU
Picture Setup
Sound Setup
Helpful Hint:
Language Setup
– You do not need to adjust the video output
setting if you are using CVBS jack (yellow) to
connect the DVD system to yourTV.
Feature Setup
3 Use 1234keys on the remote to
navigate in the menu.
4 Press OK to confirm your selection.
NOTE:
Some of the features in the Setup
Menu are described in “Getting
Started.”
To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
TIPS:
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu Options
Screen Saver – turning on/off
Setting the digital output
The screen saver will help to prevent
yourTV display device from becoming
damaged.
Set Digital Output according to the
optional audio equipment you connected.
Follow the steps of “Using the Setup
Follow the steps of “Using the Setup
Menu” and select :
Menu” and select :
> DIGITAL OUT
> SCR SAVER
DIGITAL OUT
NIGHT MODE
CNTR DELAY
REAR DELAY
TEST TONE
ALL
PCM 96K
PCM 48K
OFF
TV SHAPE
TV SYSTEM
VIDOT OUT
SCR SAVER
OFF
ON
SELECT AUDIO OUTPUT
SCREEN SAVER SETTING
AlL
OFF
Select this if you have connected the
digital output to an optional piece of
audio equipment that has a multichannel
decoder.
Select this to disable the screen saver
function.
ON
Select this if you wish to turn off theTV
screen when play is stopped or paused
for more than five (5) minutes.
PCM 96 kHz
Select this if the optional audio
equipment is capable of processing digital
signal input with sampling rates of 96 kHz.
However, if the sound output is distorted
or there is no sound, select ‘48 kHz’
instead.
PCM 48 kHz
Select this if the optional audio
equipment is incapable of processing
96 kHz digital signal input. The signal will
then be converted to a standard signal
with sampling rates of 48 kHz.
OFF
Select this to deactivate the digital
output.
Helpful Hint:
– Analog signal will also be available through
the digital output.
To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
TIPS:
28
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu Options
Night mode – turning on/off
Restoring to original settings
When activated the night mode, the high
volume outputs will be softened and low
volume outputs will be brought upward
to an audible level. It is useful for
Setting the DEFAULT function will reset
all options and your personal settings to
the factory defaults, except your
password for Parental Control.
watching your favorite action movie
without disturbing others at night.
This function can also be accessed via the
NIGHT button on the remote.
Follow the steps of “Using the Setup
Menu” and select :
> DEFAULTS
Follow the steps of “Using the Setup
Menu” and select :
PARENTAL
PASSWORD
MENU LANG
> NIGHT MODE
DEFAULTS
RESET
DIGITAL OUT
LOAD FACTORY SETTINGS
NIGHT MODE
CNTR DELAY
REAR DELAY
TEST TONE
OFF
ON
RESET
Pressing 2to select {RESET}, all settings
SET NIGHT MODE
will now reset to factory defaults.
OFF
Select this when you want to enjoy the
full dynamic of surround sound.
ON
Select this to level out the volume.
This feature is only available for movies
with Dolby Digital mode.
To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
TIPS:
29
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu Options
4 Select a rating level and press OK.
➜ DVDs that are rated above the level
you selected will not play unless you
enter your four-digit password and
choose a higher level rating. To disable
Parental Controls and have all discs play,
choose ‘NO PARENTAL.’
Restricting playback by Parental
Control
(only available in region 1 players)
Some DVDs may have a parental level
assigned to the complete disc or to
certain scenes on the disc. This feature
lets you set a playback limitation level.
The rating levels are from 1 to 8 and are
country dependent. You can prohibit the
playing of certain discs that are not
suitable for your children or have certain
discs played with alternative scenes.
PARENTAL
PASSWORD
MENU LANG
1 G
3 PG
4 PG 13
6 PG-R
7 NC-17
8 ADULT
No PARENTAL
DEFAULTS
1 In disc mode, press SYSTEM MENU.
➜ Use the 1234keys on the remote
to navigate in the menu.
SET PARENTAL CONTROL
5 Press SYSTEM MENU again to remove
the menu.
2 Select
Move to
icon and press 4.
Rating explanations
NO PARENTAL – It will play all discs.
and press 2.
Move to {PARENTAL} and press 2.
8 ADULT – Mature material; should be viewed
only by adults due to graphic sexual
material, violence, or language.
__ __ __ __
Enter code
PARENTAL
PASSWORD
MENU LANG
7 NC-17
–
No children under age 17; not
recommended viewing for children
under age 17.
DEFAULTS
6 PG-R
–
Parental Guidance - Restricted;
recommended that parents restrict
children under 17 from viewing or
allow to view only when supervised by
a parent or adult guardian.
ENTER PARENTAL PASSWORD
3 Use the numeric keypad (0-9) to enter
‘1234’ (default password) when you are
asked to enter the four-digit password.
You will have to enter the same code,
exactly, twice.
4 PG13
–
Material is unsuitable for children
under age 13.
3 PG
1 G
–
–
Parental Guidance suggested.
General Audience;recommended as
acceptable for viewers of all ages.
➜ To change the password, see page 31
“Changing the password.”
Helpful Hints:
– VCD, SVCD, CD have no level indication, so
parental control has no effect on these type
of discs.This also applies to most illegal
DVDs.
– Some DVDs are not encoded with a rating
though the movie rating may be printed on
the Disc cover. The rating level feature does
not prohibit play of such Discs.
To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
TIPS:
30
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu Options
4 Enter your new four-digit password.
Changing the password
You can change the four-digit password
used for Parental Control. Enter your
four-digit password to play a prohibited
disc or if prompted for a password. The
default password is ‘1234.’
PARENTAL
PASSWORD
MENU LANG
DEFAULTS
__ __ __ __
Enter new code
PLEASE ENTER NEW PASSWORD
1 In disc mode, press SYSTEM MENU.
➜ Use the 1234keys on the remote
to navigate in the menu.
5 Enter the same new four-digit password
again.
2 Select
icon and press 4.
Move to
and press 2.
Move to {PASSWORD} and press 2.
PARENTAL
PASSWORD
MENU LANG
DEFAULTS
__ __ __ __
Confirm code
PARENTAL
PASSWORD
MENU LANG
DEFAULTS
__ __ __ __
Enter old code
Confirm :
6 Press SYSTEM MENU again to remove
the menu.
PLEASE ENTER OLD PASSWORD
3 Use the numeric keypad (0-9) to enter
your original four-digit password at “Enter
old code.”
➜ If you are asked to enter the code for
the first time, key in ‘1234.’
➜ If you forget your password, press Ç
four times to restore to the default
password (1234.)
To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
TIPS:
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Operations
IMPORTANT!
Make sure the FM and AM antennas
are connected.
Manual presetting
You can choose to store only your
favourite radio stations.
1 Tune to your desired radio station (see
Tuning to radio stations
“Tuning to a radio station”.)
1 Press TUNER on the remote (or press
SOURCE control on front panel) to
select “FM” or “AM.”
2 Press PROG.
➜ “PROGRAM” icon appears.
3 Use the numeric keypad (0-9) to
select a preset number.
2 Press and hold S / T on the
remote until the frequency indication
starts to change, then release.
➜ The next radio station will tune
automatically.
➜ If “PROGRAM” icon goes off before you
select the desired preset number, press
PROG again.
3 To tune a weak station, press S / T
briefly and repeatedly until an optimal
reception is found.
4 Press PROG again to store.
5 Repeat steps 1~4 to store other radio
stations.
Presetting radio stations
You can store up to 40 preset radio
stations in the memory, starting from FM
and followed by AM bands.
Helpful Hints:
– If you attempt to program more than 40
preset radio stations,“PROG FULL”
appears.
– The system will exit presetting mode if no
button is pressed within five seconds.
Automatic presetting
You can store all available radio stations
automatically.
Selecting a preset radio
station
G In tuner mode, press and hold PROG
until "AUTO PROG" appears.
➜ All the available radio stations with
strong transmission signal will be stored.
➜ Automatic preset will begin from
preset (1) and all your former presets will
be overridden.
G Press 1 2or use the numeric keypad
(0-9) to select a preset number.
➜ The preset number, radio frequency,
and waveband will appear.
➜ If it has reached 40 presets,“PROG
FULL” appears.
➜ Once completed,“PROG END”
appears.
Deleting a preset radio station
G Press and hold Ç until “PXX CLR”
appears.
➜ The current preset radio station will
be deleted.
AUTO PROG
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Functions
Sound Control
Volume control
IMPORTANT!
G Adjust VOLUME control (or press
VOL +/-on the remote) to increase
or decrease the volume level.
For proper surround sound, make
sure the speakers and subwoofer are
connected (see page 11.)
➜ "VOL XX" appears. “XX” denotes the
volume level.
Selecting surround sound
To listen through the headphones
G Press SURROUND to select surround
or stereo mode.
G Connect the headphones plug to the
PHONES socket at the front of the
DVD system.
➜ The availability of the various surround
sound modes depends on the number of
speakers used and the sound available on
the disc.
➜ The center and surround speakers
operate only in Multi-channel surround
mode.
➜ The available output modes for multi-
channel include: Dolby Digital, Dolby Pro
Logic or Dolby Pro Logic II surround
sound.
➜ The speakers will be mute.
To turn off the volume temporarily
G Press MUTE.
➜ Playback will continue without sound
and "MUTE" appears.
➜ To restore the volume, press MUTE
again or increase the volume level.
➜ Stereo broadcasts or recordings will
produce some surround channel effects
when played in a surround mode.
However, monaural (single channel
sound) sources will not produce any
sound from the rear speakers.
Dimming system’s display
screen
G In any active mode, press DIM to select
desired brightness : HIGH, MID or LOW.
Selecting digital sound effects
Select a preset digital sound effects that
matches your disc’s content or that
optimizes the sound of the musical style
you are playing.
G Press SOUND to select the available
sound effect.
When playing movie discs, you can select:
CONCERT, DRAMA,ACTION or SCI-FI.
When playing music discs or while inTV,
TUNER or AUX mode, you can select:
ROCK, DIGITAL, CLASSIC or JAZZ.
Helpful Hint:
– For flat sound output, select CONCERT or
CLASSIC.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Functions
Using the remote to operate
Setting the SleepTimer
‘Philips’ television
The sleep timer enables the system to
switch to standby mode automatically at a
preset time.
1 Press TV.
2 Press S / T or use the numeric
G Press SLEEP repeatedly until it reaches
the desired preset turn-off time.
➜ The selections are as follows (time in
minutes):
keypad (0-9) to select theTV’s channel.
3 Press TVVOL +/- to adjust theTV’s
volume level.
15™ 30™ 45™ 60™ 90™ 120
4 Press B to turn off yourTV.
™ OFF™ 15…
➜ “SLEEP” icon will show on the display,
except if "OFF" is selected.
Helpful Hint:
– When listening toTV or AUX programs,
press the respectiveTV or AUX button on the
remote in order for the sound to be heard.
To check or change the setting
G Press SLEEP once to show the
remaining time before switching off.
If you continue pressing the SLEEP
button, the next SleepTimer option will
appear.
To cancel the sleep timer
G Press SLEEP repeatedly until "OFF"
appears or press the STANDBY ON
button.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
AMPLIFIER SECTION
MAIN UNIT
Output power
- Front
500WTotal power
Power Supply Rating
Power Consumption
120V / 60 Hz
160W
80W RMS / channel
1
60W FTC / channel
80W RMS / channel
80W RMS
Dimensions (w x h x d) 435 x 48 x 350 (mm)
17.13 x 1.89 x 13.78 (inch)
Weight
- Rear
- Center
4.35 kg / 9.57 pounds
- Subwoofer
Frequency Response
Signal-to-Noise Ratio
Input Sensitivity
- AUX In
100W RMS
180 Hz – 14 kHz / 3 dB
> 60 dB (A-weighted)
SPEAKERS
Front/Rear speakers
System
2 ways, Bass Reflex
system
400 mV
400 mV
4ohm, 120 Hz~12.5 kHz, 10%THD
-TV In
Impedance
Speaker drivers
Frequency response
Dimensions (w x h x d) 90 x 230 x 80 (mm)
3.54 x 9.06 x 3.15 (inch)
Weight
4 Ω
1
3” woofer, 1 3/4” piezo
120 Hz – 20 kHz
TUNER SECTION
Tuning Range
FM 87.5 – 108 MHz
(100 kHz steps)
AM 530 – 1710 kHz
(10 kHz steps)
0.835 kg/1.837 pounds
CENTER SPEAKER
System
Impedance
26 dB Quieting Sensitivity FM 20 dBf
26 dB Quieting Sensitivity AM 5000 µV/m
Image Rejection Radio
5 multi directional driver
4 Ω
4 x 3” woofer,
1 3/4” piezo
FM 25 dB
AM 28 dB
FM 60 dB
AM 24 dB
FM 55 dB
AM 40 dB
FM 30 dB
FM Mono 3%
FM Stereo 3%
AM 5%
FM 180 Hz – 10 kHz /
6 dB
Speaker drivers
IF Rejection Ratio
Frequency response
Dimensions (w x h x d) 435 x 72 x 64 (mm)
17.13 x 2.83 x 2.52(inch)
120 Hz – 20 kHz
Signal-to-Noise Ratio
Weight
1.25 kg/2.75 pounds
AM Suppression Ratio
Harmonic Distortion
SUBWOOFER
Impedance
Speaker drivers
Frequency response
3 Ω
6 1/2” woofer
30 Hz – 120 Hz
Frequency Response
Dimensions (w x h x d) 300 x 300 x 300 (mm)
11.81 x 11.81 x 11.81 (inch)
Stereo Separation
Stereo Threshold
FM 26 dB (1 kHz)
FM 23.5 dB
Weight
4.5 kg/9.9 pounds
DISC SECTION
LaserType
Disc Diameter
Video Decoding
Video DAC
Semiconductor
12cm / 8cm
MPEG-2 / MPEG-1
10 Bits
Signal System
Video Format
Video S/N
CompositeVideo Output 1.0Vp-p, 75 Ω
S-Video Output
PAL / NTSC
4:3 / 16:9
56 dB (minimum)
Specifications subject to change without prior
notice
Y - 1.0Vp-p, 75 Ω
C - 0.286Vp-p, 75 Ω
Audio DAC
24 Bits / 96 kHz
Frequency Response
4 Hz – 20 kHz (44.1 kHz)
4 Hz – 22 kHz (48 kHz)
4 Hz – 44 kHz (96 kHz)
SPDIF (Sony Philips
digital interface) Coaxial
IEC 60958
Digital Output
- PCM
- Dolby Digital
IEC 60958, IEC 61937
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for
repair. If you are unable to remedy a problem by following these hints, please
call 1-800-531-0039 for help.
Problem
Solution
No power.
–
–
Check if the AC power cord is properly
connected.
Press the STANDBY ON on the front of the
DVD system to turn on the power.
No picture.
–
Refer to yourTV’s manual for correctVideo In
channel selection. Change theTV channel until
you see the DVD screen. (see page 18)
Press DISC on the remote.
Switch the P-SCAN at the back panel to “OFF”
position if you are not using a Progressive Scan
TV.
–
–
Completely distorted picture or black/
white picture.
–
If this happens when you changing the setting
of the ‘TV SYSTEM’, wait for 15 seconds for
auto recovery. (see page 19)
–
–
Check the video connection. (see pages 12-13)
Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
–
Clean the disc. (see page 10)
The aspect ratio of the screen cannot be
changed even though you have set the
TV display.
–
–
The aspect ratio is fixed on the DVD disc.
Depending on theTV, it may not be possible to
change the aspect ratio.
No sound or distorted sound.
–
–
Adjust the volume.
Check the speaker connections and settings.
(see pages 11, 20)
–
–
Disconnect the headphones.
Press the correct source button on the
remote (TV or AUX, for example) to choose
the equipment that you want to hear through
the DVD system. (see pages 12, 13, 15)
–
–
Disconnect the power cord from the power
outlet for a few minutes. Reconnect the
power cord and try to operate again as usual.
The DVD system does not work.
The disc tray cannot open and “TRAY
LOCKED” is displayed.
Press and hold SOURCE button on the front
panel for more than two seconds, then press
PLAY button.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Solution
The DVD player does not start playback.
–
Insert a readable disc with the playback side
facing down. The DVD+R/CD-R must be
finalized. (see page 22)
–
–
–
–
Check the disc type, color system and region
code. (see page 22)
Check for any scratches or smudges on the
disc.
Press SYSTEM SETUP to turn off the setup
menu screen.
You may need to enter the password in order
to change the parental control rating level or
to unlock the disc for playback. (see page 30)
Moisture has condensed inside the system.
Remove the disc and leave the system turned
on for about an hour.
–
Cannot activate some features, such as
Angles, Subtitles, or multi-language
Audio.
–
–
The features may not be available on the DVD.
Changing the language for the sound or
subtitle is prohibited on the DVD.
There is no sound from the center and
rear speakers.
–
–
–
–
Press CENTER +- or REAR +- to
adjust the volume level. (see page 20)
Make sure the center and rear speakers are
connected correctly. (see page 11)
Press SURROUND button to select a correct
surround sound setting. (see page 33)
Make sure the source you are playing is
recorded or broadcast in surround sound
(DPL II, Dolby Digital, etc.)
Radio reception is poor.
–
–
If the signal is too weak, adjust the antenna or
connect an external antenna for better
reception.
Increase the distance between the system and
yourTV or VCR.
–
–
Tune in to the correct frequency.
Place the antenna farther away from any
equipment that may be causing the noise.
The remote control does not function
properly.
–
–
Select the source (DISC orTUNER, for
example) before pressing the function button
(ÉÅ, S, T.)
Reduce the distance between the remote
control and the system.
–
–
Replace the batteries with new ones.
Point the remote control directly toward the
IR sensor.
–
–
–
Check that the batteries are loaded correctly.
The display panel is dark.
Low hum or buzz sound.
Press DIM again. (see page 33)
Place the DVD system as far away as possible
from electrical devices that may be causing
interference.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Analog: Sound that has not been turned into
numbers. Analog sound varies, while digital
sound has specific numerical values. These
jacks send audio through two channels, the left
and right.
Aspect ratio: The ratio of vertical and
horizontal sizes of a displayed image.The
horizontal vs. vertical ratio of conventionalTVs.
is 4:3, and that of wide-screens is 16:9.
AUDIO OUT Jacks: Jacks on the back of
the DVD System that send audio to another
system (TV, Stereo, etc.)
MP3: A file format with a sound data
compression system.“MP3” is the abbreviation
of Motion Picture Experts Group 1 (or MPEG-
1) Audio Layer 3. By using the MP3 format.
One CD-R or CD-RW can contain about 10
times more data then a regular CD.
Parental control: Limits Disc play according
to the age of the users or the limitation level in
each country. The limitation varies from disc
to disc; when it is activated, playback will be
prohibited if the software’s level is higher than
the user-set level.
Bit Rate: The amount of data used to hold a
given length of music; measured in kilobits per
second, or kbps. Or, the speed at which you
record. Generally, the higher the bit rate, or
the higher the recording speed, the better the
sound quality. However, higher bit rates use
more space on a Disc.
Chapter: Sections of a picture or a music
piece on a DVD that are smaller than titles. A
title is composed of several chapters. Each
chapter is assigned a chapter number enabling
you to locate the chapter you want.
ComponentVideo Out Jacks: Jacks on the
back of the DVD System that send high-quality
video to aTV that has ComponentVideo In
jacks (R/G/B, Y/Pb/Pr, etc.)
Disc menu: A screen display prepared for
allowing selection of images, sounds, subtitles,
multi-angles, etc recorded on a DVD.
Digital: Sound that has been converted into
numerical values. Digital sound is available
when you use the DIGITAL AUDIO OUT
COAXIAL or OPTICAL jacks.These jacks
send audio through multiple channels, instead
of just two channels as analog does.
Dolby Digital: A surround sound system
developed by Dolby Laboratories containing
up to six channels of digital audio (front left
and right, surround left and right, center and
subwoofer.)
Dolby Pro Logic II: It creates five full-
bandwidth output channels from two-channel
sources. Decode only systems that derive 5.1
channels instead of the conventional 4
channels of Dolby Pro Logic surround sound.
JPEG: A very common digital still picture
format.A still-picture data compression system
proposed by the Joint Photographic Expert
Group, which features small decrease in image
quality in spite of its high compression ratio.
PCM (Pulse Code Modulation): A system
for converting analog sound signal to digital
signal for later processing, with no data
compression used in conversion.
Playback control (PBC): Refers to the
signal recorded on video CDs or SVCDs for
controlling playback. By using menu screens
recorded on aVideo CD or SVCD that
supports PBC, you can enjoy interactive
playback and searching.
Progressive Scan: It displays all the horizontal
lines of a picture at one time, as a single frame.
This system can convert the interlaced video
from DVD into progressive format when the
DVD Player is connected to a Progressive Scan
TV. It dramatically increases the vertical
resolution and provides the best picture.
Region code: A system allowing discs to be
played only in the region designated.This unit
will only play discs that have compatible region
codes. You can find the region code of your
unit by looking on the product label. Some
discs are compatible with more than one
region (or ALL regions.)
S-Video: Produces a clear picture by sending
separate signals for the luminance and the
color. You can use S-Video only if yourTV has
an S-Video In jack.
Sampling Frequency: Frequency of
sampling data when analog data is converted to
digital data Sampling frequency numerically
represents how many time the original analog
signal is sampled per second.
Surround: A system for creating realistic
three-dimensional sound fields full of realism
by arranging multiple speakers around the
listener.
Title: The longest section of a movie or music
feature on DVD. Each title is assigned a title
number, enabling you to locate the title you
want.
VIDEO OUT jack: Yellow jack on the back
of the DVD system that sends the DVD
picture video to aTV.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
RENEWED
90 DAY
LIMITED WARRANTY
Download from Www.Somanuals.com. All Manuals Search And Download.
|