Philips Radio 32PF9967D 10 User Manual
24571.1 en.qxd 31-08-2005 11:59 Pagina 1  
Read this first !  
Help?  
If this instruction manual does not give an answer or if ‘Before calling service’ do not solve your TV  
problem, you can call your Local Philips Customer or Service Centre. See the supplied World-wide  
guarantee booklet.  
Please, have the Model and Product number which you can find at the back of your television set or  
on the packaging, ready, before calling the Philips helpline.  
Model: 32PF9967D/10; 42PF9967D/10; 50PF9967D/10  
Product No:  
Care of the screen  
Do not touch, push or rub or strike the screen with anything hard as this may scratch, mar or damage  
the screen permanently. And please do not rub with dust clothes with chemical treatment.  
Do not touch the surface with bare hands or greasy cloth (some cosmetics are detrimental to the  
screen). Unplug the TV before cleaning the screen.  
When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials  
like chamois soaks. Do not use acetone, toluene and alcohol because they cause chemical damage. Do  
not use liquid cleaners or aerosol cleaners.Wipe off saliva or water drops as soon as possible.Their  
long time contact with the screen causes deformations and colour fading.  
Recycling  
R The packaging of this product is intended to be recycled.Apply to the local authorities for correct  
disposal.  
Disposal of your old product  
Your product is designed and manufactured with highly quality material and components, which can  
be recycled and reused.When this crossed-out wheeled bin symbol is attached to a product, it  
means the product is covered by the European Directive 2002/976/EC.  
Please inform yourself about the local separate collection system for electrical and electronic  
products. Please act according to your local rules and do not dispose of your old products with your  
normal household waste.The correct disposal of your old product will help prevent potential  
negative consequences for the environment and human health.  
EasyLink features are based on the “one touch operation” approach.This means  
that a sequence of actions are executed at the same time in both the television  
and the recorder, provided both are fitted with the EasyLink function and  
connected with the eurocable supplied with your recorder.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 3  
Safety warnings  
Do not insert the power plug in a wall socket before all connections are made.  
& Wall mounting instructions/Table stand  
According to the type of TV you’ve purchased a wall mount bracket  
and/or stand may be supplied. How to mount the supplied stand and/or  
wall mount bracket, see the supplied separate leaflet. Make sure that the  
wall mount is being fixed securely enough so that it meets safety  
standards.  
The weight of the TV (excl. packaging) is about 20 kg (32PF9967D);  
42 kg (42PF9967D); 58 kg (50PF9967D).  
é Place or hang the TV wherever you want, but make sure that air can  
circulate freely through the ventilation slots. Do not install the TV in a  
confined space such as a book case or a similar unit.  
To prevent any unsafe situations, no naked flame sources, such as lighted  
candles, should be placed in the vicinity. Avoid heat, direct sunlight and  
exposure to rain or water.  
The equipment shall not be exposed to dripping or splashing.  
Connect antenna and peripheral equipment  
& Before installing your TV, connect all your peripheral equipment.  
See How to connect peripheral equipment, p. 29.  
é Insert the aerial plug firmly into the aerial socket x at the bottom of  
the TV. For best picture quality use the suppressor-aerial cable  
supplied.  
“ Insert the mains cord supplied into the mains at the bottom of the TV  
and in the wall socket having a mains voltage of 198-264V.  
To prevent damaging the power (AC) cord which could cause a fire or  
electric shock, do not place the TV on the cord.  
UK - EIRE  
Remote control  
Insert the two R6-type batteries (supplied) making sure that they are  
the right way round.  
The batteries supplied do not contain the heavy metals mercury and  
cadmium. Please check on how to dispose of exhausted batteries according to  
local regulations.  
Switch the TV on  
Press the power switch B at the right side of the TV.  
An indicator on the front of the TV lights up and the screen comes on.  
If the TV is in standby mode, press the -P+ keys or the B key on the  
remote control.  
The first time (and only the first time !) the TV is switched on, a  
congratulation message will appear on screen. Follow the instructions  
B
V
MENU  
P/CH  
on screen or go to p. 7, Switch on for the first time.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 4  
Use of the remote control RC4312  
Note: For most keys pressing a key once will activate the function. Pressing a second time will de-activate it.  
When a key enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list.  
The list will be removed automatically after 6 seconds or press OK to remove immediately.  
B Standby  
Press to switch the TV on or off  
DVD/R SAT TV VCR AUX  
from or to standby mode.  
When switched off, a red indicator  
on the TV lights up.  
See ‘Audio- andVideo equipment  
keys’, p. 36.  
v Select your peripherals  
B
See p. 35.  
DVD/R SAT TV VCR AUX  
b Teletext On/Off see p. 27.  
For UK: Hold down for 3 seconds to  
switch the teletext on.  
†
v
Select  
®Ò‡π†º  
Audio andVideo equipment keys,  
see p. 36.  
Ò
‡
π
®
OK Press this key  
º
• to activate your choice, when in the  
menus.  
b
A/D  
A/D  
• to display the programme list.  
®
To switch between analogue and  
digital mode.  
MENU DIGITAL  
®
®
OK  
To display or exit from the digital  
menus (when the TV is in digital  
mode).  
Cursor keys  
Press the cursor keys up/down,  
left/right to navigate through the  
menus.  
®
MENU  
MENU  
DIGITAL  
TV  
P
Programme selection  
MENUTV  
To display or exit from the analogue  
menus.  
To browse through the TV channels  
and sources stored in the favourite  
list or to select a page in digital  
menus.  
+
V
-
+
P
¬
-
VTo adjust the volume.  
0/9 Digit keys  
To select a TV channel.  
1
4
2
5
8
0
3
6
¬ Interrupt the sound or restore it.  
i On Screen information  
For a two or three digit programme  
number, enter the second or third  
digit before the dash disappears.To  
switch immediately to a selected one  
digit TV channel, keep the digit key  
pressed a bit longer.  
In analogue mode:  
Press to display (when available)  
information about the selected TV  
channel and programme.  
7
9
i
0
In digital mode:  
- Press once to display the  
information banner.  
- Press twice to get more  
information on the programme.  
- Press a third time to remove it.  
0 Previous programme  
ON/OFF  
Ambilight  
MODE  
Press to alternate between the  
currently viewed and the previously  
viewed TV channel.  
q
j
h
b
æ
DIGITAL  
MHEG  
CANCEL  
OPTIONS  
Ambilight see also p. 24.  
• ON/OFF  
Press to switch Ambilight on or off.  
• MODE  
Press repeatedly to select one of the  
predefined ambient light settings.  
Menu/Remote control info  
When a menu is on screen (only in  
analogue mode), press i to display  
info on the selected menu item.  
While the menu info is displayed,  
press any key (except the menu or  
digit keys) to display remote control  
info.The normal function of the key is  
not executed.  
Note:When the TV is switched to  
standby, and you switch Ambilight On,  
Ambilight will be active. Only then less  
modes are available.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 5  
q Picture format  
Press this key repeatedly or press the cursor up/down to select another  
picture format:Auto format, Super zoom, 4:3, Movie Expand 14:9, Movie  
Expand 16:9, Subtitle zoom or Wide screen.  
B
DVD/R SAT TV VCR AUX  
†
v
Select  
Auto format  
Super zoom  
4:3  
Movie expand 14:9  
Ò
‡
π
®
º
b
A/D  
®
Movie expand 16:9  
Subtitle zoom  
Wide screen  
®
®
OK  
Auto format makes the picture fill the screen as much as possible.  
In case of subtitles in the bottom black bar, Auto format makes the subtitles  
visible.  
In case of a broadcaster logo in the corner of the top black bar, the logo  
disappears from the screen.  
®
MENU  
MENU  
DIGITAL  
TV  
+
V
-
+
P
Super zoom removes the black bars on the sides of 4:3 programs with  
minimal distortion.  
¬
When in Movie Expand 14:9, Movie Expand 16:9, Super zoom or Subtitle  
zoom picture format, you can make subtitles visible with the cursor up/down.  
-
Note:With signals via the DVI connector less picture formats are selectable.  
h Active control see p. 23.  
1
4
2
5
8
0
3
6
x Pixel Plus 2 demo on/off  
• Press to switch the Pixel Plus 2 demo on or off. In the right part of the  
screen Pixel Plus 2 is switched on.  
• Press longer to display the list of digital options settings. Use the cursor  
up/down to select one of the settings.  
See also Picture menu, Digital options, p. 23.  
7
9
i
0
ON/OFF  
Ambilight  
MODE  
b Dual screen (in analogue mode only)  
q
j
h
b
æ
& Press the b key.  
DIGITAL  
Press the b key to show Teletext on the right half of the screen.  
é Press the b key to switch off Dual screen.  
MHEG  
CANCEL  
OPTIONS  
Active screen selection  
When in dual screen picture/teletext, enter the desired page number with  
the digit keys or with the -P+ key, then press the MENUTV key, then select  
the left screen (with the blue ball at the top).You can now select a  
compressed or full screen view of the picture screen with the q key.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 6  
B
DVD/R SAT TV VCR AUX  
†
v
Select  
Digital or AnalogueTV channels ?  
Ò
‡
π
®
To receive TV channels, your television is equipped with 2 tuners. One is  
for digital channels, the other is for analogue channels.  
Use the A/D key on the remote control to switch the TV between  
analogue or digital channels.  
º
b
A/D  
®
Then use the -P+ key or the digit keys to select TV channels.  
®
®
OK  
®
MENU  
MENU  
DIGITAL  
TV  
+
V
-
+
P
¬
-
Only for digital channels  
1
4
2
5
8
0
3
6
j Continuous subtitles on/off  
Press this key to activate/deactivate the subtitle mode.  
See Setup, Language and location preferences menu, p. 11.  
7
9
OPTIONS  
Options menu on/off, see p. 14.  
i
0
MHEG CANCEL (UK only)  
Some Digital TV channels transmit interactive television applications  
(signalled by the MHEG icon in the banner).  
Press this key to cancel those special services (and the function bar at  
the bottom of the screen).  
ON/OFF  
Ambilight  
MODE  
q
j
h
b
æ
DIGITAL  
MHEG  
CANCEL  
æ TV Guide, see p. 15.  
OPTIONS  
To open and close Now and Next Programme Guide.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 7  
DigitalTV mode  
Switch on for the first time  
The first time the TV is switched on, a congratulation message will  
appear on screen.The language of which changes every 5 seconds.  
Note: If the menu is not displayed, see Reinstall all services, p. 10.  
& Press the OK key on the remote control, the moment your preferred  
language is visible on the screen.The Setup menu is displayed.  
é With the cursor keys, select Language, Country or Time zone and  
check if the adjustment is according to your preferences. If necessary,  
use the cursor keys to make your adjustment and press OK to exit.  
Installation  
English  
Español  
Français  
Language •  
Country •  
Time Zone •  
Service Scan •  
Italiano  
Suomi  
Set options and start a service scan  
Caution : if you select a wrong country, the channel numbering will not be  
according to the standard for your country.  
‘ Select Service scan from the menu and press OK to start the  
installation.The service scan menu is displayed.  
All digital and analogue programmes are searched for and stored  
automatically.When the search is complete, the menu will indicate the  
number of digital services and analogue programmes found.  
( Press the OK key twice to start watching TV.  
The television then displays the current programme.The installation is  
now complete.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 8  
Understanding the information in the banner  
When you select a digital programme, an information banner is  
displayed for a few seconds at the top of the screen.  
Note:You can also use the i key of the remote control to display this  
banner.  
A second press displays more information about the programme (when  
available).  
The banner contains information on the channel number, channel  
name, programme duration, transmission clock, programme title and  
the time remaining of the current programme.  
programme  
start and end  
time  
preset  
number  
clock  
symbols  
2
11:06 - 11:09  
Snooker  
i j X s  
11:46  
BBC2  
Minutes left: 14  
channel name  
programme title  
remaining time  
of programme  
Symbols description :  
i
more information about this programme is available.  
Press the i key to display or remove it.  
j
subtitling is available.  
If you want to display them, press the j key or the  
OPTIONS key to access the OPTIONS menu and select  
subtitles.  
X
Other audio languages are available and can be selected in the  
OPTIONS menu.  
s
The selected Favourite list is displayed in the one of the  
colour (red, green, yellow or blue) of the activated list.  
Note :A white colour s will appear if the programme is stored in  
one or more of the favourite list which is currently not activated.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 9  
Rearrange services  
This menu allows you to change the order of the  
stored digital channels and radio stations.  
é Use the cursor down to select Installation  
and press the cursor right twice to select the  
Service lists menu.  
Setup  
“ Use the cursor up/down to select Rearrange  
services and press the cursor right.  
Installation  
‘ Use the cursor up/down to select the channel  
Rearrange services  
you want to exchange.  
Service lists •  
Service setup •  
Test reception •  
View newTV channels  
Listen to new Radio stations  
( Press the OK key to activate.  
Note: If you want to uninstall the selected channel,  
press the red colour key.  
§ Use the cursor up/down to select the new  
channel number you want to exchange it with.  
è Press the OK key to confirm.The exchange is  
Manage service lists  
done.  
! Repeat the operations ‘ to è until all the  
Close  
channels are in the required order.  
ç Press the DIGITAL MENU key to exit the  
& From the digital mode, press the DIGITAL  
MENU key to display the Setup menu.  
Note: If the digital menu does not appear, the TV  
might be in analogue mode. Press the A/D key to  
switch the TV to digital mode and press the  
DIGITAL MENU key again.  
menu.  
View or Listen to new services  
This menu allows you to check the availability of  
new TV channels or new radio stations that have  
been launched by the broadcaster after the initial  
installation.  
& From the digital mode, press the DIGITAL  
MENU key to display the Setup menu.  
é Use the cursor down to select Installation  
and press the cursor right twice to select the  
Service lists menu.  
Setup  
“ Use the cursor up/down to select View new  
TV channels or Listen to new Radio  
stations.  
Installation  
Rearrange services  
Service lists •  
‘ If new services are available, press the cursor  
right to enter into the list and use the cursor  
up/down to move through the list.  
View newTV channels  
Service setup •  
Listen to new Radio stations  
Test reception •  
( Press the DIGITAL MENU key to exit the  
menu.  
Manage service lists  
Close  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 10  
Add new services  
This menu allows you to search for new TV  
channels or radio stations that have been launched  
by the broadcaster after the initial installation.  
& From the digital mode, press the DIGITAL  
MENU key to display the Setup menu.  
é Use the cursor down to select Installation  
and press the cursor right.  
Setup  
“ Select Service setup with the cursor down  
and press the cursor right.  
Installation  
‘ Use the cursor right to select Add new  
services and press the OK key to activate the  
installation.  
Add new services  
Service lists •  
Service setup •  
Test reception •  
Reinstall all services  
The search begins and only new channels will  
be stored and added to the channel list menu.  
The percentage of the installation that has been  
completed and the number of channels found is  
displayed.  
( When the search is complete, select Store and  
Install and manage services  
Close  
press the OK key to accept the new services.  
§ Press the DIGITAL MENU key to exit the  
menu.  
Reinstall all services  
This menu allows you to reinstall all the digital TV  
channels and radio stations.  
& From the digital mode, press the DIGITAL  
MENU key to display the Setup menu.  
é Use the cursor down to select Installation  
Setup  
and press the cursor right.  
Installation  
“ Use the cursor down to select Service setup  
and press the cursor right.  
Add new services  
Service lists •  
Service setup •  
‘ Use the cursor down to select Reinstall all  
Reinstall all services  
services and press the cursor right.  
Test reception •  
( Press the OK key to start the installation.  
A search is then made for all digital services  
which are then stored automatically.When the  
search is completed, the menu will indicate the  
number of digital services found.  
Install and manage services  
Close  
§ When the search is complete, press the OK  
key to store the services.  
è Press the DIGITAL MENU key to exit the  
menu.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 11  
Test reception  
This menu allows you to check the strength of the  
signal you are receiving through your aerial.  
“ Use the cursor down to select Test reception  
and press the cursor right.  
You obtain an indication of the actual  
programme frequency, the network name, the  
signal quality and strength.  
Setup  
Installation  
‘ You now have to enter the frequency of the  
digital channel you want to test.  
Frequency  
Service lists •  
Service setup •  
Network name  
Your TV magazine can provide the list of digital  
channel numbers. Use the table on page 38 to get  
the frequency.  
Signal quality  
Test reception •  
Signal strength  
( If the signal quality and strength is poor, a  
message appears at the bottom of the menu  
prompting you to enter the frequency between  
the lower and the higher limit.  
Test signal quality  
Close  
If after keying the frequency, the reception is  
still poor, you can try improving, renewing,  
adjusting or updating the aerial. It is however  
advisable to contact a specialised aerial installer  
in order to achieve best results.  
& From the digital mode, press the DIGITAL  
MENU key to display the Setup menu.  
é Use the cursor down to select Installation  
and press the cursor right to display the  
Installation menu.  
Language and location preferences  
This menu allows you to select your preferred  
language for audio, subtitle, teletext and menu and  
make changes to the location (country and time  
zone).  
Language default settings  
• Audio : to select the audio sound language.  
• Subtitle/Teletext : to select the  
subtitle/teletext language.  
• Subtitling mode : off, on or auto (subtitle  
only displayed in case of original audio  
transmission).  
Setup  
Preferences  
• Subtitles for hearing impaired : to activate  
or deactivate the specific subtitle for hearing  
impaired (if made available by the  
broadcaster).  
Audio  
Languages •  
Subtitle /Teletext  
Location •  
Subtitling mode  
Digital Audio Output •  
Subtitling for hearing impaired  
• System : to select the menu language.  
System  
Location settings  
• Country : to select the country where you  
are located.  
• Time zone : to select the time zone where  
you are located.  
Select your preferred language  
Close  
Digital Audio Output settings  
• Select AC3 (if the signal is broadcasted and if  
the amplifier connected supports the Dolby  
Digital format).  
• Select PCM if the amplifier connected doesn’t  
support Dolby Digital format. See also  
Connect Peripheral Equipment, MultiChannel  
Surround receiver, p. 32.  
& From the digital mode, press the DIGITAL  
MENU key to display the Setup menu.  
é Use the cursor down to select Preferences  
and press the cursor right.  
“ Use the cursor up/down to select Languages,  
Location or Digital Audio Output and press  
the cursor right.  
‘ Use the cursor up/down to select a setting and  
press the cursor right to enter into the sub-  
menu. Make your adjustment and press the OK  
key or the cursor left to exit.  
( Press the DIGITAL MENU key to exit the  
menu.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 12  
Access restrictions  
This menu allows you to setup the access  
restrictions of the digital channels.  
& From the digital mode, press the DIGITAL  
MENU key to display the Setup menu.  
é Use the cursor down to select Access  
Setup  
restriction and press the cursor right.  
Access restrictions  
“ Press the cursor right to enter into the Set  
pin code protection menu.  
On  
Off  
Set pin code protection  
Maturity rating  
‘ Use the cursor left/right to set to On and  
press the OK key to exit.  
TV channels  
You can then access the other adjustments:  
Warning : the moment you use any kind of access  
restriction, you need to fill in the pin code when you  
schedule a program for recording.  
Radio stations  
Change pin code  
• Maturity rating : select your preferred rating  
to lock the channel.  
Switch pin code protections “on” or “off”  
Maturity rating will only block certain programmes  
if the broadcaster provides data with the  
programme.  
Close  
• TV channels : select the TV channel you  
want to lock and press the OK key.  
• Radio station : select the radio station you  
want to lock and press the OK key.  
• Change pin code : press the cursor right to  
enter in the menu. Follow the on-screen  
instruction to change your access code.  
The default pin code is 1234. If you have  
forgotten your personal code, you can reset to the  
default pin code (1234) by enter the universal  
code 0711.  
The TV is equipped with a Common Interface  
(CI) slot (see p. 34).A CI module can enable  
additional services, for example Pay TV.The  
Access Restrictions menu will show the CI  
Access Restrictions when a CI module is  
installed.The CI module is responsible for the  
messages and texts on screen. In case of  
failure or strange behaviour, you must call  
your CI service provider.  
( Press the DIGITAL MENU key to exit the  
menu.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 13  
Setting up your favourite list  
This menu enables you to create a favourite list  
with your preferred TV channels and radio stations.  
For example, each member of your family can  
create his/her own favourite list.  
& From the digital mode, press the DIGITAL  
MENU key to display the Setup menu.  
é Press the cursor right to enter into the  
Favourites list menu.  
You have the choice to create 4 different  
favourite lists.  
Setup  
“ Use the cursor up/down to select your  
favourite list : List 1, List 2, List 3 or List 4  
and press the cursor right.  
Favourites  
Preferences  
List 1  
List 2  
List 3  
List 4  
‘ Use the cursor up/down to select a setting and  
press the cursor right to enter into the sub-  
menu.  
Information  
Access restrictions  
Installation  
• Name : use the cursor left/right to move  
around the name display area (16 characters)  
and the -P+ keys to select the  
characters.When the name has been entered,  
press the OK key to exit.  
• SelectTV channels : use the cursor up/down  
to select your favourite TV channels and  
confirm with the OK key. Press the cursor left  
to exit.  
Make changes to your lists of favourite services  
Close  
• Select radio stations : use the cursor  
up/down to select your favourite radio station  
and confirm with the OK key. Press the  
cursor left to exit.  
• Add all services : press the OK key if you  
want to add all the services into your  
favourite list.  
• Remove all services : press the OK key if  
you want to remove all the service from your  
favourite list.  
( Press the DIGITAL MENU key to exit the  
menu.  
§ Your favourite list can be selected using the  
options menu (see next page).  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 14  
Information  
This menu provides information about the software & From the digital mode, press the DIGITAL  
version and the installation of new software.  
MENU key to display the setup menu.  
é Use the cursor down to select Information  
and press the cursor right twice.The software  
version is displayed.  
Setup  
“ You can activate the menu to automatically  
accept any software update of your digital TV.  
Normally the product will detect if an update is  
available while it is in standby mode. Next time  
the television is turned on a banner will appear  
at the bottom of the screen indicating new  
software is available. Selecting OK activates the  
software download.  
Favourites  
Preferences  
System software  
Information  
Access restrictions  
Instalation  
Provides information on problem reports and....  
Close  
The software download menu will give a  
description of the software together with the  
date and time of the download.This may  
update certain menus, functions or add new  
features, but the general way in which the TV  
operate will not change. Once accepted the  
download will take place at the designated time  
and date.  
Whenever a new software is available, it is  
advisable to always accept and download the  
software. In case new software is available,  
you will see a message when you switch on  
the TV.  
Note:The TV must be put into standby when the  
download is due in order for it to take place.  
‘ Press the DIGITAL MENU key to exit the  
menu.  
Using the Options menu  
This menu gives you direct access to the favourite  
list, the language selection and some other  
selections.  
& From the digital mode, press the OPTIONS  
key on the remote control to display the  
options menu.  
é Use the cursor up/down to select a setting and  
press the cursor right to enter the sub-menu.  
• Favourites : use the cursor up/down to  
select your favourite list and confirm with the  
OK key.  
Options  
Favourites  
Subtitle language  
Audio language  
Mode  
None  
List 1  
List 2  
List 3  
List 4  
The None option deactivates any favourite list.  
To create your own favourite list, see page 13.  
• Subtitle language : use the cursor up/down  
to temporarily change the language and  
confirm with the OK key.  
Banner duration  
• Audio language : to temporarily change the  
audio sound language.  
To permanently change the audio and subtitle  
languages, use the Preferences menu (p. 11).  
• Mode : you can choose to only have radio  
stations,TV channels or services without  
audio or video.  
Selects the active favourite list  
Exit  
Remark : for the UK only, the TV list will contain  
both radio stations and TV channels.  
• Banner duration : to select the duration for  
which the banner is visible.  
“ Press the OPTIONS key to exit the menu.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 15  
TV guide  
The TV guide is an Electronic Service Guide that  
allows you to look up digital programmes as you  
would in a newspaper or TV magazine.  
You can navigate through the list of digital  
programmes and obtain detailed information on  
the programmes.You can also program the TV to  
provide a digital channel to be recorded.  
& From the digital mode, press the æ key to  
display the TV guide :  
A list of all the digital programmes in the  
currently selected favourite list is displayed.  
é Use the cursor down to enter into the  
Preset/service list or press the cursor right to  
access Today list.  
“ Use the cursor up/down to select a  
programme.  
1
17:15  
17:24  
‘ The TV guide features are displayed at the  
bottom of the screen. Use the coloured keys  
red, green, yellow, blue or white to activate  
them :  
BBC ONE  
Now/Next  
Today  
Preset/Service  
Now  
Next  
• Record (red key) : this feature enables you to  
record a digital channel even the TV is in  
standby mode.You will still have to program  
your video recorder.  
• Record list (green key) : this menu gives the  
list of recording schedules.You can check,  
modify, delete or add a new schedule by using  
the cursor or coloured keys as indicated on  
the screen.  
1
2
3
4
5
6
BBC ONE  
BBC TWO  
ITV Channel 3  
Channel 4  
ITV 2  
See it  
Snooker  
Trisha  
-
Microscoop  
Ice skating  
This morning  
-
Soccer  
News  
This afternoon  
BBC CHOICE  
Bodger & Badger  
• Top (yellow key) : to go directly to the top of  
the list.  
Record  
Rec.list  
Top  
Close  
Options  
• Close (blue key) : to exit from the TV guide.  
• Options (white † key) : with this menu,  
you can select your favourite list, mode or  
themes.Themes are areas of interest.  
You can for example decide to display only :  
drama, news, movie, ...  
( Press the i key if you want to display more  
information about the selected programme (if  
available).  
§ Press the æ key to exit the menu.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 16  
Recording function  
This feature enables you to record a digital channel  
while the TV is in standby mode.You will still have  
to program your video recorder.  
If you wish to continue watching another digital  
channel after setting a timer, you can do so by  
changing channels in the normal way.  
Important :The video recorder must be connected to  
EXT2 (see Connect Peripheral Equipment, p. 30). Please  
note that it is NOT possible to record one channel and  
watch another channel at the same time.  
• Day & Month : enter the date by using the  
digit keys or the -P+ keys. Press the OK key  
to exit  
• Start time : enter the start time.  
• End time : enter the end time.  
• Audio language : select your language and  
confirm with the OK key.  
• Subtitle language : make your selection and  
confirm with the OK key.  
• Subtitles for hearing impaired : select Yes  
or No and confirm with the OK key.  
• Occurrence : select Once, Daily or Weekly  
and confirm with the  
17:24  
BBC 2  
OK key.  
See it saw  
1 TVE  
Name  
Service  
( Press the red colour key to store your  
recording.The TV guide reappears.  
Enter yourpin if locked  
Day & Month  
Start time  
You can press the green colour key to display  
the list of recordings you have set.  
10/08  
12:15  
15:44  
§ If you have finished watching television, you  
must leave it in standby in order for the  
recording program to be activated.  
End time  
English  
Audio lanugage  
Important : never switch off theTV with the  
power button when a recording has been  
programmed, but use the standby B key on  
the remote control.  
Store  
Cancel  
Close  
& From the digital mode, press the æ key to  
è If you wish to continue watching another digital  
channel after setting a timer, you can do so by  
changing channels in the normal way.  
display the TV guide.  
é Use the cursor down to enter into the  
Preset/service list or press the cursor right to  
access Today list.  
Important : In digital mode, if you change the  
channel when the recording starts, the TV will record  
the last channel. you have selected.  
“ Press the red colour key to call the Record  
menu.  
! When the timer is due to start a digital  
channel, while you are watching another  
channel, the programmed digital channel is  
displayed and the recording starts.A warning  
message is displayed.  
‘ Use the cursor up/down to select a setting and  
press the cursor right to enter into the sub-  
menu. Make your adjustment and press the OK  
key or the cursor left to exit.  
• Name : the selected programme will be  
displayed here.  
• Service : you can change the number of the  
programme you want to record. Press the OK  
key to confirm.  
Note : it is only possible to change to a number  
that is in the currently selected favourite list.  
• Enter your pin code if locked : enter your  
secret code only if you have activated the  
access restriction feature (see p. 12).  
Press OK to confirm.  
ç If a digital recording is in progress, when trying  
to change a channel, a confirmation is displayed  
to continue recording or to cancel recording.  
When you select cancel recording, the newly  
selected channel is displayed.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 17  
AnalogueTV mode  
To use the menus  
& Make sure you are in Analogue mode. If necessary, press  
the A/D key on the remote control.  
é Press the MENUTV key on the remote control to  
summon the main menu.At any moment you can exit  
the menu by pressing the MENUTV key again.  
B
Picture  
Sound Ambilight Features  
DVD/R SAT TV VCR AUX  
†
TV  
Setup  
Demo  
Install  
v
Select  
Ò
‡
π
®
º
cursor to select  
adjustments  
b
A/D  
®
“ Use the cursor in the up/down direction to select the  
TV, Setup, Demo or Install menu items.  
Use the cursor left/right to select Picture, Sound,  
Ambilight or Features.  
OK key to  
®
®
activate  
OK  
return or switch  
main menu on/off  
®
MENU  
MENU  
Note: Sometimes not all the menu items are visible on the  
screen (indicated by a cluster of blue balls). Use the cursor  
down or right to reveal all items.  
DIGITAL  
TV  
Press the ikey to get  
information about the selected  
menu item.  
‘ Use the cursor in the left/right direction to select the  
menu item.  
( Use the cursor up/down again to select the control you  
want to select or to adjust.  
Note: Items temporary not available or not relevant are displayed  
in a light grey colour and cannot be selected.  
Installation  
The Install menu allows you to reinstall all the analogue TV  
channels and contains the following items:  
Automatic  
install  
Manual  
install  
Give name  
Reshuffle  
Favourite  
programmes  
Install  
EasyLink  
If your recorder has an EasyLink function, during installation, the  
language, country and available channels are automatically  
transmitted to the recorder.  
Select the menu language and country  
If you want to change your menu language and/or the  
country where you are now located, go to Language and  
location preferences, p. 11.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 18  
Store TV channels  
You can search for and store the analogue TV channels in two different ways: using Automatic Installation  
or Manual Installation (tuning-in channel by channel).  
Select your choice with the cursor right.  
& Select Automatic install in the Install menu.  
Automatic installation  
Note:All channels must be unlocked in order to autoprogram. If  
requested, enter your code to unlock all channels. (See TV, Features  
menu, Childlock, p. 26.)  
Automatic install  
Install  
é Press the cursor down.  
The autoprogramming option label Start appears.  
Install  
Start  
“ Press the cursor right.  
‘ The message Searching appears and the progress of  
autoprogramming is displayed.  
If a cable system or a TV channel which broadcasts ACI (Automatic  
Channel Installation) is detected, a programme list appears.Without  
ACI broadcast, the channels are numbered according your language  
and country selection.You can use Reshuffle to renumber them. See  
p. 19.  
It is possible that the cable company or the TV channel displays a  
broadcast selection menu. Layout and items are defined by the cable  
company or the TV channel. Make your choice with the cursor and press  
the OK key.  
Manual installation  
Manual install  
Install  
Searching for and storing TV channels is done channel by channel.  
You must go through every step of the Manual Installation menu.  
Selection mode  
System  
& Select Manual install in the Install menu.  
é Press the cursor down.  
Programme  
Search  
Follow the instructions on screen.  
Note: Search or direct selection of a TV channel.  
If you know the frequency, the C- or S-channel number, enter the 3 or  
2 digits of the frequency or the channel number directly with the digit  
keys 0 to 9 (e.g. 048).  
Fine tune  
Store  
Repeat to search for another TV channel after you have stored  
the selected TV channel.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 19  
Give name  
It is possible to change the name stored in the  
memory or to assign a name to a TV channel or  
external for which a name has not yet been  
entered.A name with up to 5 letters or numbers  
can be given to the programme numbers 0 to 99  
and to the externals.  
& Select Give Name in the Install menu and  
press the cursor down.  
é Select the programme number.  
Note: keep the cursor up/down pressed to scroll  
through the programme list quickly.  
“ Press the cursor right.  
A keyboard appears on the screen.  
Give name  
Install  
Press the cursor right to enter the keyboard.  
Press the cursor up/down, left/right to select  
the first character and press OK. Repeat for  
every character you want to enter.  
Select Space to enter a space; Delete to erase  
the highlighted character in the name entered;  
Shift to display upper- or lowercase characters  
on the keyboard; Special to display special  
characters on the keyboard. Press OK to  
confirm.  
® Space  
® Delete  
VCR1  
BBC1  
BBC2  
CNN  
TVE  
p
π
ABCDEFG 123  
HIJKLMN 456  
OPQRSTU 789  
VWXYZ  
0
.....  
® Shift  
® Special  
‘ Press the cursor left repeatedly when you have  
finished the name giving.  
( Select another programme number and repeat  
steps “ to ‘.  
Reshuffle the programme list  
Reshuffle  
You can change the order of the stored TV channels.  
Install  
BBC1  
& Select Reshuffle in the Installation menu.  
BBC2  
TV1  
é Follow the instructions on screen.  
CNN  
ARD  
NED 1  
Select Favourite TV channels  
Favourite programmes  
& Select Favourite programmes in the Install menu.  
Install  
é Select your programme number with the cursor up/down.  
BBC1  
BBC2  
TV1  
Yes  
Yes  
No  
Yes  
Yes  
No  
“ Select Yes or No with the cursor right.  
‘ Repeat é and “ for every TV channel or external you want  
CNN  
ARD  
to make a favourite or a non-favourite TV channel or external.  
NED 1  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 20  
TV Setup  
General  
Source  
Decoder  
The Setup menu contains items that control the settings  
of the TV’s functions, features, services and peripherals  
you may have connected.  
Setup  
Menu background  
Factory settings  
OSD  
Programme title  
Teletext 2.5  
Auto surround  
Subwoofer  
The General menu allows you to change settings that  
will typically be accessed only occasionally.  
The Source menu allows you to select a source.  
The Decoder menu allows you to define one or more  
programme numbers as decoder programme numbers.  
Set/Change code  
Press the i key to get information about the selected menu item.  
General  
This menu allows you to change various settings  
that are presumably adjusted less frequently than  
most other settings.  
Teletext 2.5  
Some broadcasters offer the opportunity to  
see more colours, other background colours  
and nicer pictures in the teletext pages.  
& Select Teletext 2.5.  
Menu background  
é Press the cursor right to select Teletext 2.5  
On to take advantage of this feature.  
“ Press the cursor right again to select Teletext  
2.5 Off if you like the more neutral teletext  
layout.  
Select Yes or No to turn the menu background  
on or off.  
Factory settings  
This resets the picture and sound settings to  
their predefined factory values, but maintains  
the channel installation settings.  
The selection made is valid for all channels  
which broadcast teletext 2.5.  
Note: It may take a few seconds before teletext  
broadcast switches over to Teletext 2.5.  
OSD (On Screen Display)  
& Select OSD.  
Auto Surround  
é Select Normal to activate the continuous  
display of the programme number and  
extended display of TV channel and programme  
information on screen. Minimum to activate  
the display of reduced channel information.  
Note:When subtitles is switched on, see Features,  
p. 26, display of the programme number is not  
possible.  
Sometimes the broadcaster transmits special  
signals for Surround Sound encoded  
programmes.  
The TV automatically switches to the best  
surround sound mode when Auto Surround is  
switched On.  
Subwoofer  
Programme title  
Select Yes if you installed an external  
subwoofer. See Connect Peripheral Equipment,  
Connect extra subwoofer, p. 34.  
Select Programme title Yes or No.  
When selected Yes, after the selection of a TV  
programme or after pressing the i key on  
the remote control, a TV channel which  
broadcasts teletext may transmit the name of  
the TV channel or the programme title.  
When selected No, the programme title will  
only appear after pressing the i key and not  
after the selection of a TV channel.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 21  
Set/Change code  
Important:You have forgotten your code!  
The Child lock feature (see TV, Features, p. 26)  
allows you to lock channels to prevent others  
from watching certain programmes.To watch  
locked channels, a 4-digit code must be  
entered.The Set/Change code menu item  
allows you to create or change a Personal  
Identification Number (PIN).  
& Select Change code in the General menu and  
press OK.  
é Press the cursor right and enter the overriding  
code 8-8-8-8.  
“ Press the cursor again and enter a new  
personal 4-digit code.The previous code is  
erased and the new code is stored.  
& Select Set/Change code.  
é If no code exists yet, the menu item is set to  
Set code.  
If a code has previously been entered, the menu  
item is set to Change code. Follow the  
instructions on screen.  
Source  
This menu allows you to indicate the peripheral  
you connected to one of the external inputs.  
Once you have selected the source type, e.g. DVD,  
this source will automatically be selected when  
your remote control is in DVD mode, see p. 4, and  
when you press the v key on the remote  
control.  
Source  
Setup  
EXT1  
EXT2  
EXT3  
Centre input - Centre in volume  
When you have connected a surround receiver to  
the TV, see p. 32, the loudspeakers of the TV can  
act as centre speaker, making a separate centre  
speaker unnecessary.  
DVI-I  
Side  
Centre input  
Centre in volume  
Select Centre input On.  
When having selected On, you can adjust the  
Centre in volume with the cursor left/right to  
correct volume level differences of the external  
audio receiver and speakers.  
& Press the cursor right to enter the list of types  
of peripherals attached to the selected input.  
é Select the peripheral device with the cursor  
up/down.  
Decoder  
If a decoder or a descrambler is connected, see  
p. 30, you can define one or more programme  
numbers as decoder programme numbers.  
& Select Decoder with the cursor right.  
é Select Programme.  
“ Select the programme number under which  
you have stored the programme coming from  
your decoder.  
Decoder  
Setup  
‘ Select Status.  
Programme  
Status  
• Select the input used to connect your  
decoder: None or EXT1.  
• Select None if you do not want the selected  
programme number being activated as a  
decoder programme number.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 22  
Demo  
TV  
Setup  
Demo  
Install  
The Demo menu allows to demonstrate the TV features  
separately or in a loop.  
Ambilight  
Teletext  
Active Control  
Note:Toggling through all the Ambilight modes will display  
each mode for 10 seconds each. Before switching to the next  
mode the light will first fade to off and then fade up in the  
next mode.  
TV menu  
Press the MENU TV key on the remote control to  
summon the main menu.  
Press the i key to get  
information about the selected  
menu item.  
Notes:  
- Dependent on the input signal, one or more menu items  
may not be selectable.  
- Some analogue menus can also be displayed when in  
digital mode.  
Picture menu  
Picture Sound Ambilight Features  
TV  
Smart picture  
Contrast  
& Press the cursor right to select Picture.  
Brightness  
Colour  
Sharpness  
é Select the menu items in the Picture menu with the  
cursor up/down.  
“ Adjust the settings with the cursor left/right or  
enter the list of submenu items with the cursor  
right. Select a submenu item with the cursor  
up/down.  
Tint  
Digital options  
Dynamic contrast  
DNR  
Colour enhancement  
(Hue)  
Note:To remove the menu background before adjusting  
the picture settings, see Select TV setup, General, p. 20.  
Picture format  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 23  
Smart picture  
Dynamic contrast  
Select Smart picture to display a list of  
predefined picture settings, each corresponding  
with specific factory settings.  
Sets the level at which the TV automatically  
enhances the details in dark, middle and light  
areas of the picture.  
Personal refers to the personal preference  
settings of picture in the picture menu.  
Note:This Philips TV has been set at the factory to  
look best in bright store environments which use  
fluorescent lighting.As your home will likely not be  
as well lit as a store, we recommend you that you  
cycle through the various Smart picture modes to  
find the one that best suits your own viewing  
conditions. Most consumers will find that Natural is  
the correct choice.  
DNR  
This sets the level at which noise is measured  
and reduced in the picture.  
Colour enhancement  
This makes the colours more vivid and  
improves the resolution of details in bright  
colours.  
Hue  
Digital options  
This compensates for the colour variations in  
NTSC encoded transmissions.  
Pixel Plus 2 is the most ideal setting, doubles  
the horizontal resolution and increases the  
number of lines by 33%.  
Picture format  
You may consider to select Movie Plus in case a  
halo effect should disturb you. Dependent on  
your own preference, select Progressive scan.  
This will adjust the size of the picture  
dependent on the broadcast format and your  
preferred setting.  
See also Use of the remote control, Picture  
format, p. 4.  
Active Control  
The TV continuously measures and corrects all  
incoming signals in order to provide the best  
picture possible.The ambient light sensor adjusts  
the settings according to the viewing conditions in  
the room (only when having selected the Active  
control value Maximum).  
( Press the cursor up/down to select one of the  
predefined picture settings.  
§ Press the cursor right to select Active  
Display.  
è Press the cursor up/down to select Show bars,  
Pixel Plus 2, Digital Natural Motion or Off.  
When you select Pixel Plus 2 or Digital Natural  
Motion, the TV screen is divided into two parts:  
in the left part the selected picture quality  
setting is switched off; in the right part it is  
switched on.  
& Press the h key on the remote control.  
Note: Switch off all menus on screen.  
é The Active Control menu appears.  
“ Press the cursor up/down to select the Active  
Control values Off, Minimum, Medium or  
Maximum.  
! Press the h key again to switch off the Active  
The picture settings are being optimised  
continuously and automatically which is  
displayed by bars.Those menu items can not be  
selected.  
Control menu.  
‘ Press the cursor right to select Smart  
Picture.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 24  
Sound menu  
& Press the cursor right to select Sound.  
é Select the menu items in the Sound menu with the cursor  
up/down and adjust the settings with the cursor  
left/right.Remember, control settings are at normal mid-range  
levels when the bar scale is centred.  
Sound  
TV  
Smart sound  
Equalizer  
Volume  
Balance  
Smart sound  
Select Smart sound to display a list of predefined sound settings,  
each corresponding with specific factory settings of Treble and  
Bass. Personal refers to the personal preference settings of  
sound in the sound menu.  
Loudness  
Headphone volume  
Surround mode  
(Dual I-II)  
(Mono/Stereo)  
(Nicam/Analogue)  
(3D effect)  
Notes:  
- Dual X is only available with dual sound transmission.  
- Mono/Stereo is only selectable in case of analogue stereo  
transmission.  
AVL  
Delta volume  
- Nicam/Analogue is only selectable in case of Nicam transmission.  
Ambilight  
Ambilight is an innovative lighting concept using light with fully  
adjustable colours at the back of the TV to enhance the viewing  
experience.Analysis of the picture content adapts the colours  
continuously, or the lights can be set to any fixed colour and many  
shades of white.Ambilight creates the ideal viewing environment for  
your TV resulting in improved relaxed viewing, improved perceived  
picture detail, contrast and colour.  
Ambilight  
TV  
Ambilight  
Brightness  
Mode  
(Colour)  
(Palette)  
In standby mode the lights can be set/operated to any colour and  
create a unique ambiance in the room.  
(Saturation)  
& Select Ambilight in the TV menu.  
é Press the cursor down to enter the Ambilight menu.  
“ Select Ambilight and press the cursor right to select Off or On.  
• Off: will switch off the ambient lights and downlight all other  
menu items.  
• On: the ambient lights will be on. Refine the light settings in  
the menus below.  
‘ Select Brightness to adjust the light output of the ambient  
lights.  
( Select Mode and press the cursor right to select Colour,  
Ambiance, Relaxed, Movie or Action.  
• Colour: this will show constant light according to the settings  
in the Ambilight colour menu. See below.  
• The options Ambiance, Relaxed, Movie and Action will  
dynamically match brightness and colour to the screen  
content.  
The mode selection made will effect the speed and/or  
saturation and/or intensity which determines the viewing  
impression.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 25  
E.g. in Relaxed mode, the rate of brightness and colour  
change is smoothly and soft which gives you a more immersive  
yet relaxed viewing.  
Ambiance is the rate of brightness and colour change as  
predefined in the factory.  
Movie will influence the perception of a movie whereas  
Action mode will influence the dynamic impression.  
Notes:  
- The rate of change is limited, as not to cause uncomfortable  
sensations.  
- According to the selection made, some Ambilight menu items will be  
downlighted and can not be selected.  
Ambilight in Standby mode  
When the TV is switched off, the ambient lights will also be  
switched off.When the TV is in standby mode, ambilight can be  
used to provide a unique ambience for the room. Press the  
ambilight on/off key on the remote control to switch between  
Ambilight Off or On.  
Infrared interference on external devices  
To avoid bad remote control reception, place your external  
devices out of sight of the ambient lights of your TV set.  
Note:Ambilight does not function well when the room temperature is  
less than 15°C.  
Smart Colour modes:  
• Personal: Select any Colour or hue to match to your personal  
taste, e.g. your interior, the program content (sports, movie,  
etc.), the mood you are in, etc.  
• Warm white:The Colour is matched to that of most normal  
lightbulbs. Select this setting if you want the Ambilight to fit  
best with normal living room lighting.  
• Cool white:The Colour is matched to that of normal daylight  
(6500K). Select this setting if you prefer more cool lighting.  
Note: the 6500 K is the SMPTE recommended setting for ambient  
backlighting of displays.  
• Blue:The blue Colour is preferred by most consumers to  
create a cool, modern and /or mystical atmosphere. Select this  
setting according to your personal taste or mood.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 26  
Features menu  
Features  
Sleeptimer  
This sets a time period after which the TV  
automatically switches to standby.  
TV  
Programme list  
Off  
Subtitle  
On  
Sleeptimer  
Child lock  
On during mute  
Child lock  
& Select Child lock.  
é Press the cursor right to enter the Child lock  
menu.You’re summoned to enter your code.  
Note:You have to re-enter your code each time you  
enter the child lock menu.  
Press the i key to get information about  
the selected menu item.  
Important:You have forgotten your code !  
See p. 21.  
& Press the cursor right to select Features.  
“ Select one of the menu items of the child lock  
é Select the menu items with the cursor  
up/down and adjust the settings with the  
cursor left/right.  
menu:  
Lock  
Lock after  
Custom lock  
Unlock  
Programme lock  
Child lock  
Programme list  
Press the OK key to switch over to the  
selected TV channel or external.  
• Lock if you want to lock all channels and  
externals.  
• Custom lock and press the cursor right.  
Select:  
- Lock after if you want to lock all  
programmes from a certain time onwards.  
Press the cursor right and enter the time  
with the cursor up/down and right. Press the  
OK key to validate.  
Select subtitles  
The subtitle page must be stored for each TV  
channel:  
Switch on teletext and select the proper  
subtitle page from the index. Switch off  
teletext.  
Subtitle On will automatically display them on  
the selected TV channels if subtitles are in the  
transmission.A symbol will indicate that the  
mode is on.  
- Programme lock if you want to lock a  
certain TV channel or external;  
• Select Unlock to disable all locks you have set.  
Select On during mute when you want to  
have the subtitles automatically displayed only  
when the sound has been muted with the ¬  
key on the remote control.  
Digital Teletext  
Some digital channels, which you select like any other channel, offer dedicated teletext services (for  
instance BBC TEXT).  
‘ When you have finished watching teletext;  
select a different channel with the -P+ keys or  
follow the instructions on screen to return to  
picture.  
& Press b to switch the teletext on.  
UK only:  
- MHEG is displayed when programmes are  
carrying TEXT-MHEG interactive elements,  
signalled by an MHEG icon in the banner.  
- to switch teletext on, hold b down for 3  
seconds.  
Text info  
Some digital channels also offer information on  
the programme being broadcast. In that case a  
message may appear at the bottom of the  
screen for a few seconds. Follow the  
instructions on screen and use the cursor keys  
to scroll through the text pages.  
é To use the digital teletext, follow the  
instructions on screen.  
“ Depending on the service, you may be asked to  
use the cursor keys, the OK key, the coloured  
keys, the teletext key and sometimes the digit  
keys.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 27  
Analogue Teletext  
Most analogue TV channels broadcast information via teletext.This TV has a 1200 pages memory that will  
store most broadcasted pages and subpages to reduce waiting time. After each programme change, the  
memory is refreshed.  
SwitchTeletext on and off  
Picture/Teletext  
Press b to switch the teletext on.  
& Press the b key. Press the b key to show  
Teletext on the right of the screen.  
102  
«03 04 05 06 07 08 09 10 11 12»  
BBC CEEFAX 102 Mon 05 Feb 16.35.22  
é Press the b key to switch off dual screen.  
BBC CEEFAX  
Enlarge aTeletext page  
LIONS RECORD ANOTHER WIN  
430  
Index  
100  
110  
120  
150  
200  
230  
240  
280  
News  
300  
305  
400  
415  
500  
550  
888  
Press q repeatedly to display the upper  
teletext part, the lower teletext part and then  
to return to the normal teletext page size.  
When the teletext page is enlarged, you can  
scroll the text, line by line using the cursor  
up/down.  
BBC Info  
Children  
Cookery  
Education  
Lottery  
Finance  
Music  
Headlines  
Weather  
Sports  
Radio  
Travel  
Subtitling  
TV Listings  
Yellow  
Red  
Green  
B6l0u0e  
Hypertext  
Select aTeletext page  
With hypertext you can quickly jump to a  
pagenumber or search for a specific word  
shown on the current teletext page.  
- Enter the desired page number with the digit  
keys, the cursor keys up/down, left/right or  
with the -P+ key.  
- Select the options at the bottom of the screen  
with the colour keys.  
& Press the OK key to highlight the first word or  
a number on the page.  
é Use the cursor up/down, left/right to select any  
Previously selected teletext page  
other word or number you want to search for.  
(Only possible in case there is no list of favourite  
teletext pages available. See p. 28  
Press the 0 key.  
“ Press the OK key to confirm.The search starts.  
A message appears at the bottom of the screen  
to indicate the searching, or that the word or  
page is not found.  
Select the index teletext page  
‘ Use the cursor up to exit hypertext.  
Press the white colour key † to display the  
main index (usually p.100).  
Only forT.O.P teletext broadcasts :  
Press i. A T.O.P. overview of the teletext  
subjects available is displayed.  
Select with the cursor up/down, left/right the  
desired subject and press the OK key.  
Not all TV channels broadcast T.O.P. teletext.  
Select subpages  
When a selected teletext page consists of  
different subpages, a list of available subpages  
appears on the screen.  
Press the cursor left or right to select the next  
or previous subpage.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 28  
“ Press the OK key to confirm each character  
Teletext menu  
& Press the MENUTV key to activate the menu.  
selected.  
‘ Select Cancel to cancel the word; Space to  
enter a space; Delete to delete the last  
character selected; Shift to switch between  
lowercase or capital characters; Special to  
display special characters on the keyboard and  
press the OK key.  
é Press the cursor up/down to select the menu  
items.  
“ Press the cursor right to activate.  
Reveal  
Reveals/conceals hidden information on a page,  
such as solutions to riddles and puzzles.  
Press the cursor right to activate.  
( Press the cursor left repeatedly to return to  
the Teletext menu again.  
Searching a word  
Favourite  
& Type in the word on screen or select a word  
You may create a list of eight favourite teletext  
pages in total, selected from various TV  
channels.  
from the history list on the right and press OK.  
é Select Accept and press OK again.The  
message Searching appears.  
“ To cancel the searching or to search for a new  
To add a favourite page to the list:  
word, select Keyboard and press OK.  
& Select a favourite teletext page.  
‘ When a word is not found, a message appears.  
When the word is found, it is highlighted in the  
teletext page.To continue the search, press the  
OK key.  
é Select Favourite in the teletext menu and  
press the cursor right to enter the list.  
“ Press the cursor right again to add the page.  
‘ Press the MENUTV key to watch the current  
page.  
Cycle subpages (if available)  
To watch a favourite page from the list:  
Makes the subpages cycle automatically.  
Press the cursor right to activate and to de-  
activate again.  
When in Teletext, use the 0 key to browse  
through the favourite pages of the TV channel  
actually selected.  
Note: only the pages of the current channel can be  
selected.  
Timed page  
To display a specific page from a selected TV  
channel at a certain time.  
Search  
Selecting a word  
& Press the cursor right and select Yes or No.  
On the keyboard on screen you can type in a  
random word you want to search for in the  
teletext pages.Whether upper- or lowercase is  
used has no influence.  
é Enter the time and pagenumber with the  
cursor keys or the digit keys.  
Note:Teletext does not have to remain switched on,  
but you should watch the TV channel you have  
selected the specific page from.  
102  
mo 08 may 17:08:39  
“ Press the cursor left to return to the TV menu  
WORD  
puck  
again.  
NAME  
Cancel  
Space  
Accept  
Delete  
FOOTBALL  
A B C D E F G 1 23  
Language  
H I J K L M N 4 5 6  
O P Q R S T U 7 8 9  
If the displayed characters on screen do not  
correspond with the characters used by the  
teletext broadcaster, you can change the  
language group here.  
V W X Y Z  
Shift  
0
Special  
Red  
Green  
Yellow  
Blue  
Select Group 1 or Group 2 with the cursor  
right.  
& Press the cursor right to enter the keyboard.  
é Press the cursor left/right, up/down to select  
Press the MENUTV key to leave the Teletext  
menu.  
the characters, words or functions.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 29  
Equipment to connect to the side connections  
Camera, Camcorder or Game  
& Connect your camera, camcorder or Game as shown.  
é Connect to VIDEO 2 and AUDIO L 3 for mono  
equipment. For stereo equipment also connect  
AUDIO R 3.  
S-VHS quality with an S-VHS camcorder is obtained by  
connecting the S-VHS cables with the S-VIDEO input 1 and  
AUDIO inputs 3.  
Do not connect cable 1 and 2 at the same time.This may cause  
picture distortion !  
AUDIO  
VIDEO  
2
S•VIDEO  
1
Headphone  
3
& Insert the plug into the headphone socket L as shown.  
é Press ¬ on the remote control to switch off the internal  
loudspeakers of the TV.  
The headphone impedance must be between 8 and 4000 Ohm.The  
headphone socket has a 3.5 mm jack.  
In the Sound menu select Headphone volume to adjust the  
headphone volume.  
Connect Peripheral Equipment  
There is a wide range of audio and video equipment that can be connected to your TV.  
The following connection diagrams show you how to connect them.  
Note:  
EXT1 can handle CVBS, RGB and Audio L/R;  
EXT2 CVBS,Y/C, RGB and Audio L/R;  
EXT3 CVBS and Audio L/R;  
DVI can handle VGA, SVGA, XGA and 480p, 576p, 720p, 1080i and 1152i  
Side can handle CVBS, S-VIDEO and Audio L/R.  
It is preferable to connect peripherals with RGB output to EXT1 or EXT2 as RGB provides a better picture quality.  
Note: If your recorder is provided with the EasyLink function, it should be connected to EXT2 to benefit from the  
EasyLink functionality.  
ANTENNA  
CENTRE  
IN  
AUDIO  
OUT  
EXT2  
EXT1  
AUDIO  
DVI  
EXT3  
R
L
R
L
SUBW  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 30  
Recorder (VCR-DVD+RW)  
CABLE  
EXT2  
1
2
3
4
RECORDER  
DECODER  
Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals from the  
display. Keep a minimum distance of 0,5 m from the screen.  
Connect the aerial cables 1, 2 and, to obtain the optimum picture quality, eurocable 3 as shown.  
If your recorder does not have a euroconnector, the only possible connection is via the aerial cable.You  
will therefore need to tune in your recorder’s test signal and store the test signal under a programme  
number between 90 and 99, see Manual installation, p. 18.  
See the handbook of your recorder.  
Decoder and Recorder  
Connect a eurocable 4 to your decoder and to the special euroconnector of your recorder. See also  
the recorder handbook.  
See Decoder, p. 21. You can also connect your decoder directly to EXT1 with a eurocable.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 31  
Recorder and other equipment  
CABLE  
C
EXTERNAL  
4
1
5
3
2
RECORDER  
& Connect the aerial cables 1, 2 and 3 as shown (only if your peripheral has TV aerial in-/output).  
Connect your recorder to EXTERNAL 2 with a eurocable 5.  
Connect the other equipment with a eurocable 4 to one of the euroconnectors EXTERNAL 1 or  
EXTERNAL 3 to obtain a better picture quality.  
If your recorder does not have a euroconnector, the only possible connection is via the aerial cable.  
You will therefore need to tune in your recorder’s test signal and store the test signal under a  
programme number between 90 and 99, see Manual installation, p. 18. See the handbook of your  
recorder.  
é Make a selection in the Setup, Source menu, p. 21.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 32  
MultiChannel Surround receiver  
CENTRE  
IN  
DIGITAL  
AUDIO  
OUT  
3
AUDIO  
OUT  
2
& Connect the audio cable to the MultiChannel Surround receiver and to AUDIO OUT L and R at the  
bottom of your TV 1.  
é If you want the loudspeakers of your TV to act as centre speaker, also connect an audiocable to the  
multi channel Surround receiver and to the CENTRE IN at the bottom of your TV 2.  
“ Select Centre Input On in the Source menu. See p. 21.  
Digital sound  
& Connect your Digital MultiChannel Surround receiver also to the DIGITAL AUDIO OUT connector  
3 to have digital sound being reproduced.  
é Digital sound will be reproduced if the selected digital channel is broadcasted with AC3 sound  
transmission.  
“ Select AC3 in the digital Setup menu, Preferences, Digital Audio Output. See p. 11.  
‘ Select Digital Audio input on your digital MultiChannel Surround receiver.  
Warning:  
If no AC3 signal is transmitted, there will be no sound on the digital audio out output.  
Note: No sound will be heard when a TV channel or external source is locked via the Features/Child lock menu  
(see p. 26).  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 33  
Equipment to connect to a DVI connector  
AUDIO  
R
L
DVI  
CENTRE IN  
3
4
2
DVI  
1
VGA  
....  
....  
The DVI connector allows the following TV and monitor display modes, via the v key on the remote  
control, for High Definition (HD) and computer (PC) equipment:  
HD  
Standard Definition TV (SDTV)  
Enhanced Definition TV (EDTV)  
High Definition TV (HDTV)  
640x480i  
720x576i  
640x480p  
720x576p  
1920x1080i  
1280x720p  
PC  
VGA  
SVGA  
XGA  
640x480  
800x600  
1024x768  
60 Hz  
60 Hz  
60 Hz (not for 42PF9967D)  
Note: If necessary, you can adjust the picture position to the centre of the screen with the cursor keys.  
& Connect your equipment to the DVI connector of your TV 1.  
According to the type of connector of your equipment, you may have to use an appropriate adapter.  
DVD  
Connect the DVI to DVI cable to the DVI connector of your TV 1.  
Computer (PC):  
- with a DVI connector: connect the DVI to DVI cable to the DVI connector of your TV 1.  
- with aVGA connector: connect theVGA cable to aVGA to DVI adapter 4 and connect to the DVI  
connector of your TV 1.  
é Connect the audio cable 2 to the DVI AUDIO R (right) and L (left) inputs of the TV when the TV  
expects analogue audio for a connected peripheral equipment to come from an analogue audio input  
OR  
Connect the audio cable 3 to one of the DIGITAL AUDIO IN connectors of the TV when the TV  
expects digital audio for a connected peripheral equipment to come from a digital audio input.  
Then also make your selection of the source to which the peripheral equipment with digital audio  
input has been connected in the Setup, Source menu, p. 21.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 34  
Connect extra subwoofer  
SUBWOOFER  
To enhance the sound reproduction of your TV you can connect an externally powered subwoofer  
(between 20 and 250 Hz).  
& Connect the audio cable of the external subwoofer to the SUBWOOFER socket at the rear of your  
TV.  
é Select Subwoofer in the Setup, General menu, p. 20.  
“ Adjust the frequency of the external subwoofer to 100-120 Hz (according to your personal  
preference) if present on the subwoofer.  
‘ Adjust the volume level of the external subwoofer, presumed this control is present on the subwoofer.  
See also the instruction manual of the external subwoofer.  
Common Interface  
COMMON INTERFACE  
A common interface is available to connect a CAM (Conditional Access Module) and a SmartCard.  
Please contact your service provider to get more information about these modules.  
Note:The television should always be switched off before any module is inserted in the common interface slot.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 35  
Recorder or DVD with EasyLink  
The recorder or DVD can be operated with the remote  
control via the Recorder or DVD menu on screen.  
Recorder  
Ò
p
‡
π
†
Ï
Rwd Play Stop Play Ffw Eject  
& Press the MENUTV key on the remote control.  
é Select the Recorder or DVD menu with the cursor  
DVD  
up/down.  
Ò
p
‡
π
†
Ï
“ Press the cursor left/right, up/down to select one of  
Prev. Play Stop Play Next Eject  
the recorder or DVD functions.  
The key ® for recording can be operated in the TV  
mode.  
If your EasyLink recorder has the system standby  
function, when you press the B key for 3 seconds, both  
TV and the recorder are switched to standby.  
To select connected equipment  
Press the v key on the remote control repeatedly to  
select EXT1, EXT2, EXT3, Side or DVI according to  
where you connected your equipment.  
B
Remark : Most equipment (decoder, recorder) carries out the  
switching itself, when it is switched on.  
DVD/R SAT TV VCR AUX  
†
v
Select  
Ò
‡
π
®
º
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 36  
Audio- and video equipment keys  
This system remote control operates the following Philips equipment:TV,  
VCR, DVD, DVD/R, SAT (RC5/RC6),AMP (+TUNER), CD, CD/R.  
B
Press the Select key to operate any of the equipment indicated in the  
display  
(AUX = CD, CDR,VCR; DVD/R = DVD, SAT = SAT (RC5).Another device  
can be selected by pressing Select repeatedly within 2 seconds.The led will  
blink slowly to indicate the device.  
Press one of the keys on the remote control to operate the peripheral  
equipment.  
DVD/R SAT TV VCR AUX  
†
v
Select  
Ò
‡
π
®
º
To return to TV mode press Select while the led is blinking.  
When no action is taken within 60 seconds, the remote goes back to TV  
mode.  
b
A/D  
®
®
®
OK  
When you do not want the remote to go back to TV mode, and to stay in  
the mode selected, proceed as follows:  
Select the desired mode with the Select key. Wait until no LED is lit. Press  
the Select key again simultaneously with the OK key for at least 2 seconds.  
The remote will not go back to TV mode from now on and will remain in  
the mode selected.  
®
MENU  
MENU  
DIGITAL  
TV  
+
V
-
+
P
¬
To go back to the default setting of the remote (TV mode) repeat what is  
explained above, selecting the TV mode.  
-
Note:When the Select key is pressed and held for more than 2 seconds, the  
RC5/RC6 system select command is transmitted.  
1
4
2
5
8
0
3
6
MENUTV to switch the menu  
B
to switch to standby  
7
9
on or off  
ºæ for pause (VCR, DVD, CD)  
- P + for chapter, channel, track  
RDS news/TA (AMP);  
to shuffle play (CD/R)  
i
0
selection  
0 to 9 digit entry  
®
for record  
ON/OFF  
Ambilight  
MODE  
0
tape index (VCR),  
select a DVD title/chapter,  
select a frequency (AMP)  
Ò
for rewind (VCR, CD);  
search down (DVD, AMP)  
q
j
h
b
æ
DIGITAL  
MHEG  
CANCEL  
OPTIONS  
‡
for stop  
for play  
cursor up/down  
to select the next or the  
previous disc (CD)  
cursor left/right  
π
†
for fast forward (VCR, CD);  
search up (DVD, AMP)  
b
i
RDS display (AMP);  
to select your choice of  
subtitle language (DVD);  
to select the previous or  
following track (CD)  
search up/down (AMP)  
display information  
Additionally the DVD/R, SAT and AUX indicator  
can be programmed to operate the DVD-R, DVD +  
receiver, DVD-R + receiver, SAT (RC6), CD-R and  
VCR instead.  
“ Select the corresponding DVD/R, SAT, AUX  
indicator.The remote control will operate your  
DVD-R, DVD or DVD-R in combination with a  
receiver (DVD/R), SAT (RC6) (SAT), CD-R or  
VCR (AUX).  
& Select TV with the Select key.  
Note:To return to the modes programmed in the  
factory, either remove the batteries for a few  
minutes, or press the OK key + digit 1 (DVD  
mode); or + digit 3 (SAT-RC5) or + digit 5 (CD  
mode).  
é To program  
• DVD-R, press the OK key + digit 2;  
• SAT (RC6), press the OK key + digit 4;  
• CD-R, press the OK key + digit 6;  
• DVD + receiver, press the OK key + digit 7;  
• DVD-R + receiver, press the OK key + digit 8;  
• VCR, press the OK key + digit 9.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 37  
Before calling service  
Symptoms  
Items to Check and Actions to follow  
Poor Picture  
• Have you selected the correct TV system in the manual installation menu?  
• Is your TV or house aerial located too close to loudspeakers, non-earthed audio  
equipment or neon lights, etc?  
• Mountains or high buildings can cause double pictures or ghost images.  
Sometimes you can improve the picture quality by changing the direction of the  
aerial.  
• Is the picture or teletext unrecognisable? Check if you have entered the correct  
frequency. See Installation, Manual installation, p. 18.  
• Are brightness, sharpness and contrast out of adjustment?  
Select Factory settings in the Setup, General menu, p. 20.  
No Picture  
• Are the supplied cables connected properly ? (The aerial cable to the TV, the  
other aerial to your recorder, theVGA cables to the display, the power cables.)  
• Has the child lock been switched off ?  
• Is your PC switched on ?  
• Do you see a black screen and the indicator in front of the TV lights up blue,  
this means that the display mode is not supported. Switch yourVGA-source to  
a correct display mode.  
• In case of weak or bad signal, consult your dealer.  
Digital distortion  
No sound  
The low quality of some digital picture material may be the cause of digital image  
distortion. In this case select the Soft setting using the Picture menu, Smart  
Picture, without changing the picture settings manually.  
• No sound on any channel? Check the volume isn’t at minimum.  
• Is the sound interrupted with the mute key ¬?  
No solution found Switch your TV off and then on again once. Never attempt to repair a defective  
for your picture or TV yourself. Check with your dealer or call a TV technician.  
sound problem ?  
Scanning has failed (After checking the installation/signal from aerial) Either:  
• Your aerial is not pointing properly at the digital TV transmitter;  
• Your aerial installation needs to be upgraded:  
• You are not in the coverage area to correctly receive digital television.  
For a proper diagnosis, call our electrical retailer.  
Remote control  
Standby  
• Check if the remote control is in the correct mode.  
• If your TV no longer responds to the remote control, the batteries may be dead.  
• You can still use the MENU key and the -/+ keys on the right side of your TV.  
Your TV consumes energy in the standby mode. Energy consumption contributes  
to air and water pollution. Power consumption: 2 W.  
No stable or not  
synchronisedVGA  
picture  
Check if you have selected the correctVGA mode in your PC.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24571.1 en.qxd 31-08-2005 11:59 Pagina 38  
Warning concerning stationary images on theTV screen  
A characteristic of Plasma Display Panels is that displaying the same image for a long time can  
cause a permanent after-image to remain on the screen.This is called phosphor burn in.  
Normal use of the TV should involve the showing of pictures that contain constantly moving and  
changing images that fill the screen.  
Examples of stationary images (this is not an all-inclusive list, you may encounter others in your  
viewing):  
• TV and DVD menus: listings of DVD disk content;  
• Black bars: when black bars appear at the left and right side of the screen, it is recommended  
to change to a picture format so that the picture fills the entire screen;  
• PIP and Multipip: do not view for long periods of time using the PIP function or Multipip  
function;  
• TV channel logo: present a problem if they are bright and stationary. Moving or low-contrast  
graphics are less likely to cause uneven aging of the screen;  
• Stock market stickers: presented at the bottom of the TV screen;  
• Shopping channel logos and pricing displays: bright and shown constantly or repeatedly in  
the same location on the TV screen.  
Examples of still pictures also include logos, computer images, time display, teletext and images  
displayed in 4:3 mode, static images or characters, etc.  
Notes:  
- reduce contrast and brightness when viewing  
- once burn-in occurs it will never disappear completely.  
Centre Frequencies Table (in KHz)  
Digital Frequency  
Channel  
Nominal Centre  
Frequency KHz  
Digital Frequency  
Channel  
Nominal Centre  
Frequency KHz  
21 . . . . . . . . . . . . . . 474000  
46 . . . . . . . . . . . . . . 674000  
22 . . . . . . . . . . . . . . 482000  
23 . . . . . . . . . . . . . . 490000  
24 . . . . . . . . . . . . . . 498000  
25 . . . . . . . . . . . . . . 506000  
26 . . . . . . . . . . . . . . 514000  
27 . . . . . . . . . . . . . . 522000  
28 . . . . . . . . . . . . . .530000  
29 . . . . . . . . . . . . . . 538000  
30 . . . . . . . . . . . . . . 546000  
31 . . . . . . . . . . . . . . 554000  
32 . . . . . . . . . . . . . . 562000  
33 . . . . . . . . . . . . . . 570000  
34 . . . . . . . . . . . . . . 578000  
35 . . . . . . . . . . . . . . 586000  
36 . . . . . . . . . . . . . . 594000  
37 . . . . . . . . . . . . . . 602000  
38 . . . . . . . . . . . . . . 610000  
39 . . . . . . . . . . . . . . 618000  
40 . . . . . . . . . . . . . . 626000  
41 . . . . . . . . . . . . . . 634000  
42 . . . . . . . . . . . . . . 642000  
43 . . . . . . . . . . . . . . 650000  
44 . . . . . . . . . . . . . . 658000  
45 . . . . . . . . . . . . . . 666000  
47 . . . . . . . . . . . . . . 682000  
48 . . . . . . . . . . . . . . 690000  
49 . . . . . . . . . . . . . . 698000  
50 . . . . . . . . . . . . . . 706000  
51 . . . . . . . . . . . . . . 714000  
52 . . . . . . . . . . . . . . 722000  
53 . . . . . . . . . . . . . . 730000  
54 . . . . . . . . . . . . . . 738000  
55 . . . . . . . . . . . . . . 746000  
56 . . . . . . . . . . . . . . 754000  
57 . . . . . . . . . . . . . . 762000  
58 . . . . . . . . . . . . . . 770000  
59 . . . . . . . . . . . . . . 778000  
60 . . . . . . . . . . . . . . 786000  
61 . . . . . . . . . . . . . . 794000  
62 . . . . . . . . . . . . . . 802000  
63 . . . . . . . . . . . . . . 810000  
64 . . . . . . . . . . . . . . 818000  
65 . . . . . . . . . . . . . . 826000  
66 . . . . . . . . . . . . . . 834000  
67 . . . . . . . . . . . . . . 842000  
68 . . . . . . . . . . . . . . 850000  
69 . . . . . . . . . . . . . . 858000  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Microscope Magnifier DX9100VS User Manual
Pfaff Sewing Machine 904 1 User Manual
Philips Hair Clippers 25LC User Manual
Philips Indoor Fireplace DVP5990 User Manual
Philips MP3 Docking Station DCM250 37 User Manual
Planet Technology Security Camera ICA 501 User Manual
Plantronics Headphones 79534 01 User Manual
Polaroid Digital Camera PDC 3070 User Manual
Poulan Tiller 96082000900 User Manual
Powermatic Lathe 3520B User Manual