DTR4610/28
DTR2610/28
MANUELE D'UTILIZZO
USER MANUAL
DTR2610)
il
per
(nero
PHILIPS
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Meaning of symbols ___________________1
Safety and environmental instructions___1
Contents_____________________________2
6
Main Menu _____________________12
Menu navigation ________________13
Channel manager _______________13
Timer manager _________________14
Parental Control ________________15
6.1
6.2
6.3
6.4
6.4.1 ‘Security’ Settings ________________15
6.4.2 Change your PIN code____________15
1
2
Unpacking _______________________3
Installation guide _________________3
6.5
6.6
Data channels __________________15
Your preferences________________15
6.6.1 Display options __________________15
6.6.2 Language options ________________16
3
Product description_______________6
Front view ______________________6
Rear view_______________________7
6.7
Installation _____________________16
3.1
3.2
6.7.1 Location _______________________16
6.7.2 Settings ________________________16
6.7.3 Channel Search__________________17
6.7.4 Signal meter ____________________18
6.7.5 Receiver Status __________________18
6.7.6 Factory Reset ___________________18
4
Remote Control __________________8
5
Day to Day operation _____________9
6.8
6.9
Help__________________________18
Pay Per View __________________18
5.1
Turn on your receiver or switch to low
power _________________________9
5.2
5.3
Wake up your receiver or switch to
standby ________________________9
7
8
9
Easy Recording__________________19
Troubleshooting guide ___________21
Technical Specifications __________22
Change channel__________________9
5.3.1 Using number keys ________________9
5.3.2 Using P+ and P-__________________9
5.3.3 Using the channel list(s)_____________9
5.3.4 Using BACK (last channel recall) ______9
5.4
5.5
5.6
Selecting digital TV or digital Radio__10
Channel Banner_________________10
Changing the current programme
options________________________11
5.7
How to Run MHP Interactive
Applications ____________________11
2 CONTENTS
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Unpacking
As you unpack your receiver, please make sure the following accessories are included:
Remote control
with batteries
Mains cord
SCART cable
Phone cord
(adapter not
supplied)
RF cable
(DTR4610 only)
(DTR4610 only)
The package also includes the following documents:
- User Manual
- Philips World-Wide Guarantee
Plastic bags can be dangerous. To avoid suffocation keep the bag away from babies and
children.
2 Installation guide
Please refer to the safety section before connecting your receiver.
TV set
Video recorder
Terrestrial
receiver
UNPACKING 3
Download from Www.Somanuals.com. All Manuals Search And Download.
The smart card golden or silver contacts must
be facing up at card insertion.
When this crossed-out wheeled bin symbol is
attached to a product or its packaging, it
means the product is covered by the
European Directive 2002/96/EC.
Please inform yourself about the local separate collection
system for electronic products.
Please act according to your local rules and do not
dispose of your old products with your normal household
waste. The correct disposal of your old product will help
prevent potential negative consequence for the
environment and human health.
1 Disconnect your TV set and recorder from the mains.
2 Integrate your receiver in your existing installation as
shown on the above diagram.
3 Insert the two batteries supplied in your remote control.
4 Reconnect your TV set and recorder to the mains. Do
not connect your receiver to the mains yet!
5 Switch on your TV set and select a channel.
6 Plug the receiver's power supply cord to the mains. The
receiver front panel green LED gets on.
7 Now you should see the Welcome screen on your TV
screen. After a few seconds, the Welcome screen
disappears.
8 Then, a screen appears, that allows you to select the
language. Highlight the desired language by pressing V or
W, and then press OK.
You are prompted to confirm your choice by pressing OK
again.
4 INSTALLATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Next, highlight the country where you operate the
receiver by pressing V or W, and then press OK.
You are prompted to confirm your choice by pressing OK
again.
10 The next screen is used to select both the TV screen
format corresponding to your TV set and update mode.
Highlight the appropriate format by pressing C or B,
then move to the update mode selection using V or W,
and highlight Yes to allow for automatic software update.
Alternatively, highlight No if you prefer to be notified
when software update is available. Press OK to initiate
the channel search.
11 Once it has been completed, the receiver tunes to the
first found TV channel.
Now you are ready to enjoy viewing digital terrestrial TV.
Refer to chapter 5 and 6 to learn more about using your
receiver.
INSTALLATION GUIDE 5
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Product description
3.1 Front view
1
2
3
4
5
6
7
1
2
3
4
5
6
Smartcard slot
LOW POWER button: Switch the receiver on or to "low power".
TV/RADIO button:
"-" button:
Toggle between digital TV and digital radio.
Channel down.
Bicolour LED:
Red LED
Display receiver status (see status indicator table).
Display receiver status (see status indicator table).
Blink at remote control command reception.
Channel up.
7
"+" button:
STATUS INDICATOR TABLE
Indicator
Bicolour LED
Red LED
Mode
Low power
Standby
red
orange
green
TV/Radio mode
Download in progress
Blinking red
red
Timer active when receiver on
green
Timer active when receiver in standby
orange
red
Note: if the red LED is blinking while your receiver is in "Standby", it indicates that an update of your
receiver software is taking place. Do not interrupt this operation. Wait for the green LED to light up,
indicating successful update, and then continue as normal.
Your receiver, as any electronic equipment, consumes power. In order to reduce power
consumption, please switch your receiver to either Standby or "Low Power" whenever you
are not using it. For maximum energy saving we recommend you switch off the receiver by
unplugging it from the mains if you are not using it for a long time.
6 PRODUCT DESCRIPTION
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Rear view
1
2
3
4
5
6
7
8
9
10
1 Telephone Line*** (3)
To connect the supplied telephone cord to be connected to
your telephone line using the appropriate adapter (adapter not
supplied).
2 VCR SCART* (1)
3 Digital Audio*
To connect a SCART lead to be connected to the SCART
socket input (EXT1) of your VCR or DVD Recorder.
To connect to one of the digital audio input of your HiFi /audio
receiver system.
4 Serial*
5 Aerial In*
Data interface used during servicing.
To connect the plug of your aerial cable.
6 230V~50Hz 15W max** To connect the supplied mains cord to be connected to the
power socket.
7 Label
8 TV SCART* (1)(2)
Type and serial number of your receiver.
To connect the supplied SCART lead to be connected to the
SCART socket input of your TV set.
9 L/R Audio Output*
10 RF Out*
To connect to the Left/Right audio Cinch inputs of your
HIFI/audio receiver system.
To connect the supplied RF coaxial cable to be connected to
the aerial input socket of your TV or VCR.
* Safety Extra Low Voltage
** Hazardous Voltage
*** Telecommunication Network Voltage 3
(1) SCART is also called Euroconnector or Peritel.
(2) The supplied SCART lead is suited for RGB format, which allows the best picture quality. Consult
the user manual of your TV set to select its RGB capable SCART socket input.
(3) This equipment has been approved pursuant to Commission Decision 99/303/EC for pan-
European connection to the public switched telephone network (PSTN). However, due to
differences between the individual PSTNs provided for in different countries, the approval does
not, of itself, give an unconditional assurance of successful operation on every PSTN network
termination point. In the event of problems, you should contact your equipment supplier in the
first instance.
PRODUCT DESCRIPTION 7
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Remote Control
0-9 number keys
Standby
2
Switch your receiver into the
standby mode.
- In viewing mode: select channels.
- In menu: directly select a menu
item or set a setting.
- In standby: wake up the receiver.
EPG
Open/Close the Programme Guide.
INFO
Switch between channel banner,
extended info page one and then
subsequent pages, and normal
viewing.
BACK
- In viewing mode: return to the
previously tuned channel.
- In menu mode: return to the
previous screen.
EXIT
Return to normal viewing. If EXIT
is pressed and held for at least 2
seconds, the current application is
closed and normal viewing is
resumed. The "Autostart" status is
then switched off temporarily until
the receiver tunes to this channel.
VW
- Switch the Channel Banner in
the browsing mode.
- Scroll up/down in a menu or
channel list.
CB
In Channel Banner: switch
between the current and next
programme.
A +/-
Increase/Decrease the volume
level.
OK
Confirm your choice.
MUTE c
Mute the sound on your TV or
receiver.
P+/P-
- In viewing mode: tune the
next/previous channel within the
current channel list.
RED, GREEN, YELLOW, BLUE
Contextual keys used in MHP
applications.
- In channel lists: tune the
next/previous channel.
- In standby: wake up the receiver.
TV/STB
TEXT
Contextual key used in MHP
applications.
Toggle between watching
terrestrial digital TV via your
receiver and standard analogue TV
via your TV set.
i/APP
Launch MHP applications in
manual mode.
4
Open the Options menu to
momentarily change the
soundtrack, subtitles, teletext, or
display format setting.
FAV
Open/Close the current channel
list.
MENU
Open/Close the Menu.
RADIO
- In viewing mode: toggle between
TV and Radio.
- In standby: wake up the receiver.
REC
Open the Setting a Timer screen.
8 REMOTE CONTROL
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Day to Day operation
5.1 Turn on your receiver or switch to low power
Your receiver is in “low power”, as indicated by the left-hand LED lit in red. The only way to turn
it on is to press the LOW POWER button on the front panel.
While watching digital TV or listening to digital radio, press the LOW POWER button on the
front panel to switch your receiver to “low power”.
5.2 Wake up your receiver or switch to standby
While watching digital TV or listening to digital radio, press the standby key of the remote control
to switch your receiver to standby.
While your receiver is in standby, to wake it up:
- Either press the P+, P-, RADIO or any number key of the remote control.
- Or press the -/+ or TV/RADIO button on the front panel.
5.3 Change channel
When you are watching digital TV or listening to digital radio, there are different ways of changing
channel.
5.3.1 Using number keys
Enter the desired channel number using number keys.
5.3.2 Using P+ and P-
Press P+ to select the next channel in the current list, or P- to select the previous channel in the
current list.
5.3.3 Using the channel list(s)
- Press the FAV key to open the current channel list.
- Scroll to the desired channel, and then press OK to
select it.
- Alternatively, press FAV, and then use the C or B to
enable another channel list to choose from.
TV Channel List
5.3.4 Using BACK (last channel recall)
Press the BACK key to return to the previously selected channel.
DAY-TO-DAY OPERATION 9
Download from Www.Somanuals.com. All Manuals Search And Download.
5.4 Selecting digital TV or digital Radio
To switch between digital TV and digital Radio, press the RADIO key.
5.5 Channel Banner
Channel Number
Current Time & Date
Start Time
Icons
Channel Name
Channel Number
End Time
Progress Bar
Program Name
Channel Banner Icons
This icon informs that some program information is available for the program
displayed in Channel Banner.
This icon informs that the current channel is locked.
This icon informs that a viewing reminder has been set for a particular program.
This icon informs that a recording reminder has been set for a particular program.
This icon informs that a program with more than one soundtrack is broadcast.
This icon informs you that pressing
opens the application menu.
This icon informs you that the program is broadcast with AC3/Dolby Digital sound.
This icon informs you that the particular program is parentally locked.
This symbol informs that you may launch external applications by pressing OK.
This icon informs that teletext is broadcast on the currently tuned channel.
This icon informs that you may select subtitles for the current program.
This icon informs that you may select subtitles intended for deaf or hard-of-hearing
viewers for the current program.
This icon informs you that the current channel is scrambled.
10 DAY-TO-DAY OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
5.6 Changing the current programme
options
Press the
key to access the Options menu.
4
This menu is used to change the Audio language and
Subtitles language for the current programme.
From the Options menu, you may also change the
Format of the display. This setting applies to all
programmes and channels, as if set from the menu.
Option Menu
5.7 How to Run MHP Interactive
Applications
Your receiver supports downloading and running MHP
interactive applications. Some applications are run
automatically on tuning to a respective channel. Other
applications need to be launched manually.
If you tune to a channel on which interactive applications
are broadcast, you will see the icon on the
Channel Banner. This icon is displayed alternately with
the
with the
icon if applications are run automatically or
icon otherwise.
Interactive Applications Icon
In case of manual applications pressing APP brings up the
Applications window allowing you to selected the
application you want to run. Once you have selected the
application, press OK. However, if you are not interested
in running interactive applications, press EXIT to remove
the Applications window from the screen.
Once the application is running follow the instruction
given by the application played on screen.
To quit the interactive application, press and hold the
EXIT key for at least 2 seconds. You can also quit the
application by following the on-screen descriptions
brought to you by the application itself or tuning to a
different channel by pressing P+/ P-.
Display Option Screen
Please note that if you do not want any interactive
applications to be run automatically, set the Application
AutoSTART option in the Display Options screen to
NO.
DAY-TO-DAY OPERATION 11
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Main Menu
Main Menu
1-Timer Manager
2-Your Preferences
Display Options
Language Options
3-Parental Control
Security Settings
Change PIN Code
4-Channel Manager
5-Data Channels
6-Installation
Location
Settings
Channel Installation Signal Meter
receiver Status
Factory Reset
TV Settings
Installation of New Channels
Re-install all Channels
System Information
System Settings
Modem Settings
Modem Connection
Update Settings
Manual receiver Update
7-Help
Parental Control
Use of Timers
MHP Applications
Receiver Update
8-Pay Per View
12 MAIN MENU
Download from Www.Somanuals.com. All Manuals Search And Download.
6.1 Menu navigation
Your receiver offers a menu system that allows you to set the way many of the features of your
receiver operate.
MENU
To access the Main Menu, press the MENU key.
VW, OK and number keys
The Main Menu consists of 8 submenus. To evoke one of the submenus, highlight its name using
the V or W keys, and then press OK. You may also press the number key to directly access the
respective menu item.
CB and number keys
To set settings in any screen, use either the C or B key to select from predefined values, or
number keys to enter figures, dates, times, etc.
OK, BACK and EXIT
To quit a menu and save changes, press OK.
Alternatively, press BACK to go back one level in the menu system without saving changes. To
exit the menu system without saving changes, press MENU or EXIT.
6.2 Channel manager
Channel Manager is used to manage the “User” channel list.
The Delete Channels feature is used to remove channels from the “User” channel list.
The Lock Channels feature is used to protect access to certain channels of the “User “ list using
your 4-digit PIN code.
The Order Channels feature is used to move channels within the “User” channel list.
The Add Channels feature is used to add channels from the “System” channel list to the “User”
channel list.
The Restore Channel List feature is used to reset the “User” channel list to the “System” channel
list.
- Select the Mode: TV or Radio.
- Select the Modify feature you want to use: Delete/Lock/Order/Add channels and Restore
Channel List.
- Press OK to proceed. If you have chosen to restore your channel list, you are then prompted
to confirm.
Managing channels
- Scroll to the channel you want to
delete/lock/move/add, and then press OK.
- To delete or lock the selected channel, press OK. An
icon appears at the end of the line. If you have chosen
to delete this channel, you then are prompted to
confirm.
- To move the selected channel, move to the desired
position, and then press OK.
- To add the selected channel to the “User” list, press
OK.
Locking a Channel
MAIN MENU 13
Download from Www.Somanuals.com. All Manuals Search And Download.
6.3 Timer manager
Timer Manager lists all the existing timers. From this
screen, you can set, modify, and delete timers.
To be able to record a digital programme using a
VCR or DVD recorder, you must set a timer on
your receiver and also enable recording on the
recorder.
Timer Manager
Setting a timer
- Scroll to an empty line of the list and press OK to add a
timer.
- Set the timer settings:
• Timer type: Recording or Viewing
• Mode: TV or Radio
• Channel Number and Name
• Date, Start time, and End time
• Periodicity: Once, Daily, or Weekly.
- Press OK to confirm.
Setting a Timer
Modifying a timer
- Highlight the timer to be modified from the timer list,
and then press OK.
- Select Modify Timer and press OK.
- Edit the timer settings, and then press OK.
Deleting Timers/Reminders
- Highlight the timer to be deleted from the timer list,
and then press OK.
- Select Modify Timer and press OK to confirm
deletion.
Modifying a Timer
Please note that when you set a recording, it is
protected from being interrupted. To cancel a
running recording, press the following key
sequence: TIMER then 0.
14 MAIN MENU
Download from Www.Somanuals.com. All Manuals Search And Download.
6.4 Parental Control
Parental Control is used to set PIN code protection on
some menus, locked channels, and programmes not
suitable for certain audiences.
6.4.1 ‘Security’ Settings
This item is used to enable the protection features
mentioned above and specify a parental level to protect
access to programmes according to their maturity level.
For parents Submenu
- Set the settings:
• Receiver Lock: select Yes to enable protection
features
• Parental Level: PIN code protection is
automatically enabled for programmes which
maturity level is higher than the parental level you
set.
6.4.2 Change your PIN code
This item is used to change your personal 4-digit code,
called PIN code.
Initially, your PIN code is assigned the value 1234.
To change your PIN code:
- Enter the current value.
- Then enter the new value of your choice.
- Enter the new value again to confirm.
Parental Level
6.5 Data channels
Please note that only MHP applications can be run.
6.6 Your preferences
Your Preferences is used to set on-screen display and
language options of your choice.
6.6.1 Display options
This item is used to set on-screen display settings,
including the channel banner settings.
- Set the Channel Banner Duration of your choice.
- Set Volume bar to Yes to include the volume indicator
in the on-screen display.
- Set Application Auto Start to Yes to automatically
launch the available MHP applications (recommended
setting).
Your Preferences Submenu
MAIN MENU 15
Download from Www.Somanuals.com. All Manuals Search And Download.
6.6.2 Language options
This item is used to define the on-screen display language,
audio languages, and subtitle languages of your choice.
Language Options Screen
6.7 Installation
Installation is used to configure your system, search for
channels, and manage your receiver status.
When the decoder is locked, access to the Installation
menu is protected by PIN code.
Installation Submenu
6.7.1 Location
This item is used to set the Country and Time Zone so
that the time displayed matches your actual local time.
Changing the country will initiate a channel search and
you will lose your current channel list.
6.7.2 Settings
Settings is used to match your receiver settings to your
TV and recorder.
Settings Submenu
TV Settings:
refer to the table below to set TV Screen Format and
Display Format.
TV Settings Screen
16 MAIN MENU
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Screen Format TV screen format = 4:3
TV screen format = 16:9
broadcast format = 4:3
Displayformat
broadcast format = 16:9
full picture with black bars at
the top and bottom
full picture with black bars on
the left and right
Letter-box
picture cut-off on the left and
right
picture cut-off at the top and
bottom
Pan-Scan
Full screen
full picture squeezed to fit
full picture squeezed to fit
System settings:
- Video standard:
PAL or SECAM, pre-configured according to the
selected country.
- TV SCART Output, VCR SCART Output:
to get the best picture quality, set this option to RGB.
- Easy Recording/Type of VCR/DVD-R control: refer to
chapter Easy Recording.
- Default Volume Level:
volume level at wake-up from standby.
System Settings Screen
Modem Settings:
modem configuration is generally handled by the MHP applications.
Modem Connection:
follow the instructions displayed on-screen to check your modem connection.
Update Settings:
set Automatic Update to Yes to automatically initiate the update procedure when available.
Otherwise you will be prompted to initiate the procedure.
Note that your decoder must be in running mode in order to check for updates.
6.7.3 Channel Search
Channel Search is used to either install new channels or
re-install all channels:
- Either select Installation of New Channels to update
your channel list by adding newly available channels.
- Or select Re-install all channels: your channel list will
be replaced by a new one.
- Press OK to launch the channel search. You may
interrupt this procedure by pressing BACK.
Channel Searching
MAIN MENU 17
Download from Www.Somanuals.com. All Manuals Search And Download.
6.7.4 Signal meter
Signal Meter is used to display the strength and quality
of the signal broadcast at the specified frequency in order
to check your antenna connection and setup.
Signal Meter
6.7.5 Receiver Status
System Information provides information about the
system, loader, and smart card.
Besides, the Manual Receiver Update item is used to
check whether new software is available for your
receiver. If available, press OK to initiate the update. Do
not interrupt this operation once started.
Receiver Status Submenu
6.7.6 Factory Reset
Select the desired option in the Restore Factory
Settings window and press OK. Restoring the factory
settings of the receiver allows you to restart the first-time
installation process. As a result, your channel list is
replaced by a new one
Factory Reset
6.8 Help
This submenu is used to provide information on how to
use your receiver and set the various settings.
6.9 Pay Per View
Pay per view is used to provide information on your
smart card, including information your access rights for
Mediaset and LA7 Pay Per View channels.
18 MAIN MENU
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Easy Recording
The Easy Recording feature allows you to perform recordings without the necessity to program
your video recorder (VCR or DVD recorder). When you set a recording reminder or timer from
the Channel Banner or Timer Manager, the VCR starts/ends recording at the correct time.
Please note, however, that you may only use the Easy Recording feature provided that your
recorder supports it.
•
•
First of all, consult User Manual of your recorder equipment to check if it supports Easy
Recording. Please note that most Philips VCR/DVD recorders support one of the two Easy
Recording options: either Prepare Record (to be checked first) or Record Link.
Also, both your TV and VCR shall be equipped with two SCART sockets.
If your equipment satisfies above two conditions, connect your receivers as shown in the
Connection diagram below.
Then, select the System Settings item from the Settings submenu, enable the Easy Recording
feature by setting its option to YES, and assign to the Recording Type an appropriate value:
either Prepare Record or Record Link. You might have to test both settings to find out the one
applicable for your recorder.
TV set
Video recorder
Terrestrial
receiver
EASY RECORDING 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Assuming the settings of your receiver and recorder (refer to your VCR or DVD recorder user
manual) are done, to perform a recording you shall:
- Program a timer with your receiver (refer to section 6.3)
- Put your recorder in the appropriate status to be controlled by your receiver (refer to the VCR
or DVD recorder user manual).
At timer occurrence your recorder shall start and stop recording automatically.
Note: While the recording is in progress, your receiver is protected from inadvertent action to disrupt
the recording. To cancel the running recording, press EXIT. This brings up a small window prompting
you for confirmation. To cancel the recording, press OK.
20 EASY RECORDING
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Troubleshooting guide
Check the guide below for a possible cause of the problem you are experiencing.
The most common problems that arise are related to cable connections. Make sure that your
receiver is properly connected.
Symptom
Remedy
Nothing lights up on your receiver front
panel.
Check that the mains power cord is correctly connected. Disconnect this cord, and then
reconnect it to ensure it is in place.
Check that power is available at the wall socket.
Your remote control fails to operate your
receiver.
Make sure your receiver is in operating mode.
Make sure that you are pointing your remote control at the receiver front panel.
Check the batteries in your remote control.
The front panel LEDs are lit respectively in red and green: a recording is running and your
receiver is locked on the channel you are recording. Press successively TIMER then 0 to
recover full control of your receiver.
There is no sound/picture but the front
panel orange LED is on.
Your receiver is in standby. Press P+/P- on your remote control to wake up your receiver.
Alternatively, press the +/- button on the receiver front panel.
There is no sound/picture. However, front
panel display is correct.
You are watching ordinary TV via your TV set. Press the TV/STB remote control button to
watch digital TV via your receiver.
Make sure that the SCART connections are correct.
Connections are correct but the TV set is NOT switched to external AV source. Press the
TV/STB remote control button twice; if the problem is not fixed refer to the user manual
of your TV set.
Main Menu can be displayed but you
Your receiver has not been properly configured. Perform the Channel Search procedure
cannot select channels.
(from Installation submenu). Optionally return to factory setting.
Main Menu and Channel Banner can be
displayed, but there is no reception (black
screen).
Your aerial is not receiving the signal. Check the installation, and the aerial positioning and
connection. Also, check signal quality.
Signal is too weak. Check the installation, and the aerial positioning and connection. This
effect may also be due to severe weather conditions.
The picture is not sharp and text is difficult The TV SCART output video format is not set to RGB. Change the TV SCART setting to
to read.
RGB from the System Settings item of the Installation submenu.
The TV SCART lead is not connected to the RGB?capable SCART socket of your TV set
(refer to TV set user manual for proper connection).
The SCART lead for TV connection is not RGB?capable (not fully wired). Use the SCART
cable supplied with your receiver for the connection to the TV set.
Intermittent reception ("mosaic" effect or
"frozen" image).
You may have defective cable links. Check all connections and cables.
Poor signal due to the incorrect positioning of the aerial. Reorient the aerial and fasten it
securely.
You have forgotten your PIN code.
You have the possibility to reset your PIN code to its default value (1234). While watching
digital TV or listening to digital radio, press MENU, then press the red colour key, and then
type in the Master PIN Code (00799700) in quick succession.Please keep this code secret to
prevent your children from using it.
TROUBLESHOOTING GUIDE 21
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Technical Specifications
This product is in conformity with the requirements of the 95/47/EC and 2002/21/EC directives.
Modem
Video Decoding
Application System
Resources
-
-
Type
interface
V90
RJ 11
-
MPEG-2 DVB compliant up to MP@ ML
(SD)
Smart card reader
Type:
Processor clock speed
SDRAM - CPU/Video-Graphics
Flash memory
180 MHz
40 MB
8 MB
-
-
Video bit rate:
Video format:
up to 15 Mbit /sec
-
ISO 7816
4:3 (letter box or
Pan & scan if source
is in 16:9) and 16:9
Accessories
EEPROM
16 kB
Graphics resolution
16 bits
-
-
-
-
-
Remote control:
1 Scart cable
User manual
Worldwide Guarantee booklet
Batteries:
AA/R06
RC 19137008/01
-
Resolution:
up to 720x576 pixels
Terrestrial antenna inter-
face
Audio Decoding
-
MPEG layer I / II
2 x 1.5V type
-
-
RF input:
IEC 169-2
female connector
IEC 169-2 male
connector
Ease of installation
-
-
-
RF cable (DTR4610 only)
Telephone cord (DTR4610 only)
Mains cord
RF output (bypass):
-
-
Automatic program installation via scanning
Program editing for personalised installation
(delete, add, move)
Reception-Demodulation
Miscellaneous
-
-
-
Demodulation type:
Network:
Input frequency range:
IV/V
Loop-through frequency
range (MHz):
COFDM 2K / 8K
MFN /SFN
VHF III & UHF
Ease of use
Temperature range (°C)
-
-
Operating
Storage
+5°C to 45°C
-10°C to +70°C
-
-
-
-
Automatic program list update
Direct access TV & Radio modes
Full remote controlled
Mains:
230 V ~ +/-10%
50 Hz
-
47 - 862 MHz
Automatic recording via:
• Timer programming by tagging in banner
Consumption
De-scrambling
• Easy recording for Philips VCR and
DVD+RW.
• Prepare Record
• Record Link
Now & Next program in banner
-
-
-
Power:
Standby:
Low power
< 10W
< 6 W
< 1 W
Type:
DVB
Embedded
1 for CA
Nagra & Irdeto for
Italy
Implementation:
Smart card reader:
CA system for pay-TV:
Weight
-
-
Dimensions:
-
-
-
Product
Including packaging
2 kg
2.5 kg
EPG list per channel based on EIT schedule
Operation/Features
Product
mm
Packaging
mm
260 x 225 x 60
365 x 275 x 90
Connections
-
Receiver compatible with services based on
MHP
TV SCART:
-
Output:
CVBS or RGB / Fast blanking
-
-
-
-
-
-
1000 presets
volume controlled audio L/R, slow
blanking outputs
Free to air reception
DVB Subtitles
Multi-language
VCR SCART
Parental lock with PIN code
Channel lock with PIN code
Menu controlled installation and operation
using On Screen Display
Menu
-
Input:
CVBS or RGB / Fast blanking, slow
blanking , audio L/R
-
English, Italian, French, German.
User manual
English, Italian.
-
Output: CVBS , audio L/R, slow blanking
during timer if "Prepare Record"
mode is activated
-
-
-
8 event VCR timer / Reminder
Automatic VCR play back: Audio L/R +
CVBS or RGB / Fast blanking
Audio CINCH
-
-
Analog audio output:
Digital audio output:
L / R
PCM
-
-
-
Full range RF loop-through
Software update via over the air download
PCM Digital audio out
Due to continued product improvements, this
information is subject to change without notice.
Serial interface:
Type
-
RJ 9
22 TECHNICAL SPECIFICATIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
|