Philips Projection Television 55P8288 User Manual
Projection  
Television  
55P8241  
60P8241  
55P8288  
60P8288  
3135 035 20203  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Read before operating equipment  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
16. Damage Requiring Service - The appliance should be  
serviced by qualified service personnel when:  
A. The power supply cord or the plug has been damaged;  
or  
B. Objects have fallen, or liquid has been spilled into the  
appliance; or  
C. The appliance has been exposed to rain; or  
D. The appliance does not appear to operate normally or  
exhibits a marked change in performance; or  
E. The appliance has been dropped, or the enclosure  
damaged.  
7. Do not block any of the ventilation openings. Install in  
accordance with the manufacturers instructions.  
8. Do not install near any heat sources such as radiators, heat  
registers, stoves, or other apparatus (including amplifiers)  
that produce heat.  
9. Do not defeat the safety purpose of the polarized or ground-  
ing-type plug. A polarized plug has two blades with one  
wider than the other. A grounding type plug has two blades  
and third grounding prong. The wide blade or third prong  
are provided for your safety. When the provided plug does  
not fit into your outlet, consult an electrician for replacement  
of the obsolete outlet.  
17. Tilt/Stability - All televisions must comply with recommend-  
ed international global safety standards for tilt and stability  
properties of its cabinet design.  
• Do not compromise these design standards by applying  
excessive pull force to the front, or top, of the cabinet which  
could ultimately overturn the product.  
• Also, do not endanger yourself, or children, by placing  
electronic equipment/toys on the top of the cabinet. Such  
items could unsuspectingly fall from the top of the set and  
cause product damage and/or personal injury.  
10. Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the point  
where they exit from the apparatus.  
18. Wall or Ceiling Mounting - The appliance should be  
mounted to a wall or ceiling only as recommended by the  
manufacturer.  
11. Only use attachments/accessories specified by the manu-  
facturer.  
19. Power Lines - An outdoor antenna should be located away  
12.  
Use only with a cart, stand, tripod, bracket, or table  
specified by the manufacturer, or sold with the app-  
aratus. When a cart is used, use caution when  
moving the cart/apparatus combination to avoid  
from power lines.  
20. Outdoor Antenna Grounding - If an outside antenna is  
connected to the receiver, be sure the antenna system is  
grounded so as to provide some protection against voltage  
surges and built up static charges.  
injury from tip-over.  
13. Unplug this apparatus during lightning storms or when  
Section 810 of the National Electric Code, ANSI/NFPA No.  
70-1984, provides information with respect to proper  
grounding of the mast and supporting structure grounding of  
the lead-in wire to an antenna discharge unit, size of  
grounding connectors, location of antenna-discharge unit,  
connection to grounding electrodes and requirements for  
the grounding electrode. See Figure below.  
unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing  
is required when the apparatus has been damaged in any  
way, such as power-supply cord or plug is damaged, liquid  
has been spilled or objects have fallen into apparatus, the  
apparatus has been exposed to rain or moisture, does not  
operate normally, or has been dropped.  
15. This product may contain lead and mercury. Disposal of  
these materials may be regulated due to environmental con-  
siderations. For disposal or recycling information, please  
contact your local authorities or the Electronic Industries  
Alliance: www.eiae.org  
21 Object and Liquid Entry - Care should be taken so that  
objects do not fall and liquids are not spilled into the enclo-  
sure through openings.  
Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides  
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close  
to the point of cable entry as practical.  
Example of Antenna Grounding  
as per NEC - National Electric Code  
GROUND CLAMP  
ANTENNA LEAD IN WIRE  
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)  
GROUNDING CONDUCTORS (NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)  
ELECTRIC SERVICE EQUIPMENT  
Rev. 3/9/01  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
GETTING STARTED  
SOUND MENU  
Welcome/Product Registration . . . . . . . . . . . . . . . .2  
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . .3  
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . .4  
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Adjusting the Treble, Bass,  
and Balance . . . . . . . . . . . . . . . . . . . . . . . . . . .30  
Using the AVL (Audio Volume Leveler)  
Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Using Incredible Surround . . . . . . . . . . . . . . . . .32  
Setting the TV for Stereo and SAP . . . . . . . . . . .33  
Setting the Audio Out Control . . . . . . . . . . . . . . .34  
Using the TV Speaker Control  
ON-SCREEN FEATURES  
PICTURE MENU  
Adjusting the Picture . . . . . . . . . . . . . . . . . . . . . .6  
Turning on the Dynamic Noise  
Reduction (DNR) Control . . . . . . . . . . . . . . . . . .7  
Turning on the ImageMax Control . . . . . . . . . . . .8  
The Convergence Control:  
and Audio Outputs . . . . . . . . . . . . . . . . . . . . . .35  
Using the Bass Boost Control . . . . . . . . . . . . . . .36  
REMOTE CONTROL  
Using SmartPicture . . . . . . . . . . . . . . . . . . . . . . .37  
Using SmartSound . . . . . . . . . . . . . . . . . . . . . . .38  
Using Surf and Alternate Channel . . . . . . . . . . . .39  
Using the Sleep Timer Control . . . . . . . . . . . . . .40  
Using the Volume and AV Buttons . . . . . . . . . . .41  
Setting the TV Remote to Work  
•Converge Red/Blue . . . . . . . . . . . . . . . . . . . .9  
•Converge Multipoint Red/Blue . . . . . . . .10–11  
•Undo Multipoint . . . . . . . . . . . . . . . . . . . . .12  
FEATURES MENU  
The Timer Control:  
•Setting the Clock . . . . . . . . . . . . . . . . . . . . .13  
•Setting the Start Time . . . . . . . . . . . . . . . . .14  
•Setting the Stop Time . . . . . . . . . . . . . . . . .15  
•Selecting the Channel . . . . . . . . . . . . . . . . .16  
•Setting the Activate Control . . . . . . . . . . . .17  
•Constantly Displaying  
Accessory Devices . . . . . . . . . . . . . . . . . . .42–46  
THE PICTURE-IN-PICTURE (PIP) FEATURE  
Using PIP (Basic Connections) . . . . . . . . . . . . . .47  
Using the PIP Remote Control Buttons . . . . . . . .48  
Adjusting the PIP Color and Tint Controls . . . . .49  
More PIP Connections . . . . . . . . . . . . . . . . . . . .50  
the Time on Screen . . . . . . . . . . . . . . . . . .18  
The AutoLock Control:  
GENERAL INFORMATION  
•Understanding AutoLock . . . . . . . . . . . . . . .19  
•Setting up the Access Code . . . . . . . . . . . . .20  
•Blocking Channels . . . . . . . . . . . . . . . . . . .21  
•Blocking by Movie Rating . . . . . . . . . . . . .22  
•Blocking by TV Rating . . . . . . . . . . . . . . . .23  
•Turning the Blocking Control  
Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . .51  
Glossary of Television Terms . . . . . . . . . . . . . . .52  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53  
Factory Service Locations . . . . . . . . . . . . . . .54–55  
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . .56  
on or off . . . . . . . . . . . . . . . . . . . . . . . . . .24  
•Blocking Unrated Broadcasts . . . . . . . . . . .25  
•Blocking Broadcasts  
QUICK USE AND SETUP GUIDE  
Projection  
Television  
Quick Use and Setup Guide  
Refer to the simple Quick Use and Setup Guide  
TABLE OF CONTENTS  
Setting the Tuner Mode Control  
IMPORTANT  
(supplied with your TV) for details on the follow-  
ing:  
1
2
NOTE: This owner's manual is used with several  
different television models. Not all features (and  
drawings) discussed in this manual will necessar-  
ily match those found with your television set.  
This is normal and does not require you contact-  
ing your dealer or requesting service.  
1
1
1
Getting Started  
Warning/Important Notice  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.3  
.3  
.4  
.4  
.4  
10  
2
9
3
8
4
7
6
5
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.1 Running Auto Program  
.1 Editing Channels  
.2 Using AutoChron to Set the TV’s Clock  
.2 Naming Channels  
.3  
Making Basic Antenna/Cable Hookups  
.
.
.
.
Using the TV Buttons  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Using the Remote Control Buttons  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
That Have No Rating . . . . . . . . . . . . . . . .26  
•Reviewing Your Settings . . . . . . . . . . . . . . .27  
•Clearing All Blocked Channels . . . . . . . . . .28  
Using the Closed Captioning Control . . . . . . . . .29  
W
ARNING: TO PREVENT FIRE OR SHOCK  
HAZARD DO NOT EXPOSE THIS UNIT TO  
RAIN OR EXCESSIVE MOISTURE.  
Setting the TV’s on-screen menu language  
AutoChron, SmartPicture, and SmartSound are trademarks of Philips Consumer Electronics Company. Copyright  
Company. All rights reserved.  
©
2001 Philips Consumer Electronics  
HOOKING UP YOUR TV (BASIC TV CONNECTIONS)  
SMART  
HELP  
CABLE TV  
If your Cable TV signal  
comes from single round  
cable (75 ohm), then you're  
ready to connect to the TV  
If you have cable converter  
Connect the cable TV cable to the  
ANTENNA IN 75Ω plug on the TV  
If you have cable converter box,  
connect the OUT(put) plug from the  
converter to the ANTENNA IN 75Ω  
(ohm) plug on the TV  
a
.
CABLE INPUT/CONVERTER  
Use the  
a
Auto Program fea-  
ture to store in the  
TV’s memory only  
the channels with  
active broadcast sta-  
tions. See page page  
our Cable TV input into  
a
single (75 ohm) cable or  
converter box installation.  
In either case, the connec-  
tion to the TV is very easy.  
Just put the threaded end  
of the cable signal to the  
.
Yyour home may be  
a
a
box, connect the cable TV signal  
to the cable signal IN(put) plug  
on the converter.  
.
•
•
•
•
•
Basic TV Connections  
2
3
for details.  
Cable TV Company  
ANTENNA IN 75Ω  
Cable TV Signal Input  
ANTENNA IN 75Ω MONTT  
A
N
T
E
N
N
A
I
  7
  5
Ω
MONITOR OUT  
VIDEO  
A
V
1
I
A
V
2
I
A
V
1
I
N
A
V
2
I
N
Y
M
O
N
O
/
Pb  
Pr  
S
-
  I
    E
    O
A
U
D
I
R
Y
TV’  
s
antenna plug and  
VIDEO  
O
R
Pb  
Pr  
screw it down tightly.  
S-VIDEO  
MONO/L  
UDIO  
Back of TV  
A
R
OUT  
IN  
NOTE: The connecting cable  
for the converter is supplied  
by the cable TV company.  
Cable TV Converter  
Box Connection  
Round Cable  
75Ω (Ohm)  
Television and Remote Operation  
On-screen Menu Controls  
1
SMART  
HELP  
ANTENNA  
NOTE: For homes with separate UHF and  
VHF antennas, you will need an optional com-  
Push the round end of the  
adapter (or antenna) onto the  
ANTENNA IN 75Ω plug on the  
If your antenna has  
round cable (75 ohm) on the  
end, then you're ready to connect it  
a
COMBINATION UHF/VHF  
biner to connect to the TV  
.
To get optional  
U/V  
accessories to make the  
connections shown  
here, contact your deal-  
er, or our Parts  
combination antenna  
Areceives normal broad-  
cast channels (VHF 2–13  
back of the TV If the round  
.
to the TV  
.
Combiner  
end of the antenna wire is  
threaded, screw it down finger  
tight.  
If your antenna has flat, twin-  
lead wire (300 ohm), you first need  
to attach the antenna wires to the  
A
N
7
Ω
M
                  U
A
A
M
                  r
S
O
and UHF 14–69).  
Your  
Information Center at  
1-800-851-8885.  
Back of TV  
screws on a 300- to 75-ohm  
connection is easy because  
there is only one ANTENNA  
IN 75Ω (ohm) plug on the  
adapter.  
300- to 75-Ohm Adapter  
300Ω (Ohm) to  
75Ω (Ohm) Adapter  
back of your TV,  
and that’  
s
where the antenna goes.  
2
1
ANTENNA IN 75Ω  
A
N
T
E
N
N
A
I
  7
  5
Ω
MONITOR OUT  
VIDEO  
A
V
1
I
A
V
2
I
ANTENNA IN 75Ω  
MOTT  
A
V
1
I
N
A
V
2
I
N
Y
M
O
N
O
/
Pb  
Pr  
S
-
  I
    E
    O
A
U
D
I
R
Y
VIDEO  
Twin–Lead  
Wire  
Combination VHF/UHF  
Antenna  
Pb  
Pr  
S-VIDEO  
O
R
MONO/L  
UDIO  
Back of TV  
(Outdoor or Indoor)  
A
How to Use the Installation Features  
Connection Options for Accessory Devices  
R
Round Cable  
75Ω (Ohm)  
TV TO VCR  
onnect the OUT TO  
Refer to the owner's  
Connect your anten-  
na or cable TV signal to the  
IN FROM ANT(enna) plug on  
the VCR.  
TV plug on the VCR to the  
ANTENNA IN 75Ω plug on  
the TV (connecting cable sup-  
plied with the VCR).  
manual included with your  
VCR for other possible con-  
nections and TV/VCR operat-  
ing details.  
BASIC CONNECTION  
ollow the steps to the  
Fright to connect  
a
300Ω (Ohm) to  
75Ω (Ohm) Adapter  
basic antenna or cable TV  
VCR, and then  
Outdoor  
VHF/UHF  
Antenna  
signal to  
a
1
Round Cable  
the VCR to the TV.  
For  
75Ω (Ohm) Supplied with VCR  
information on other  
hookups (possible when  
cable/descrambler boxes  
are included), refer to the  
2
O
R
I
N
F
R
O
M
A
N
T
.
O
U
T
T
O
T
V
A
N
T
E
N
N
A
I
N
7
5
Ω
MONIT
VIDE
A
V
1
I
N
A
V
2
I
N
Y
owner’  
VCR and the cable con-  
verter  
s
manuals for the  
Pb  
Pr  
S-VIDEO  
Cable TV signal  
MONO/L  
UDIO  
NOTE: This owner's manual is used with several different tele-  
vision models. Not all features (and illustrations) discussed here-  
in will necessarily match your television set. This is normal and  
does not require that you contact your dealer or request service.  
A
A
T
N
A
I
      7
Ω
M
N
T
      R
      O
T
A
1
N
A
2
      I
V
   E
P
P
S
V
R
M
N
/L  
          D
   r
   E
.
VCR  
Back of TV  
1
3135 035 20201  
Because of continuous product improvements, the information  
mentioned in the documents accompanying your product are  
subject to change without notice.  
AutoLock, ImageMax, Incredible Surround, SmartPicture, and SmartSound are trademarks  
of Philips Consumer Electronics Company. Copyright © 2001 Philips Consumer  
Electronics Company. All rights reserved.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
Audio/Video Jack Panel allows direct connections with VCRs, DVDs, or  
other accessory devices, providing quality TV picture and sound playback.  
Digital-Ready Projection TV  
Audio Volume Leveler (AVL) Control keeps the TV sound at an even level.  
Peaks and valleys that occur during program changes or commercial breaks  
are reduced, making for a more consistent, comfortable sound.  
This Projection Television is capable of connecting  
to both the current analog television signals of today  
as well as interfacing with new, upcoming digital  
source playback products and devices. This TV  
includes multiple signal connectors (Component  
Video, S-Video, and Composite Video), which give  
you a variety of equipment playback options for dig-  
ital set-top boxes, satellite receivers, cable boxes,  
and other digital devices.  
AutoChron automatically sets the right time of day and maintains it with dig-  
ital precision through brownouts, power failures, and even Daylight Savings  
Time adjustments.  
AutoLock allows you to block the viewing of certain channels or programs  
with certain ratings if you do not want your children to view inappropriate  
materials.  
Auto Program scans for all available channels from regular antenna or cable  
signals and stores only active broadcast stations in the TV’s memory.  
While there may exist some digital devices with  
connections not available on this television, you  
should be adequately prepared for the vast majority  
of products coming onto the digital consumer elec-  
tronics’ market. NOTE: You should always use the  
connection output on digital devices that gives the  
highest level of picture quality possible. As listed  
above, the Component Video (or Y PB PR) input  
delivers the best color and picture reproduction, fol-  
lowed by S-Video, and then Composite Video. In  
addition to these inputs, your television also  
Channel Edit allows you to add or delete channels from the list stored in the  
TV’s memory. Channel Edit makes it easy to limit or expand the number of  
channels that are available to you when you press the Channel Scan (+,–) but-  
tons on your remote control.  
Closed Captioning allows the viewer to read TV program dialogue or voice  
conversations as on-screen text.  
Dynamic Noise Reduction (DNR) can help eliminate broadcast signal noise  
(“speckles” in the picture).  
ImageMax helps you sharpen the picture quality by making dark portions of  
the picture darker and lighter portions brighter.  
Infrared Remote Control works your TV and other remote-controlled  
devices, such as VCRs, DVD players, cable converters, and satellite receivers.  
includes the standard 75-ohm cable signal connector  
for use with antennas or analog cable boxes.  
On-screen Menu shows helpful messages and instructions for adjusting or  
setting TV feature controls (can be viewed in English, French, or Spanish).  
Sleep Timer automatically turns the TV off after a set amount of time of your  
choice.  
Items Included with This TV  
SmartPicture allows you to push a button and adapt your television’s picture  
to various types of programming, such as sports, movies, and multimedia  
(games), as well as to the occurrence of a weak broadcast signal.  
As you unpack your TV, please note that this  
Directions for Use manual contains the follow-  
ing:  
SmartSound allows you to select from three factory-set controls and a per-  
sonal control that you set according to your own preferences through the on-  
screen Sound menu. The three factory-set controls (Voice, Music, and  
Theatre) enable you to tailor the TV sound to enhance the particular program-  
ming you are watching.  
• Safety Tip Information  
• Factory Service Center Locations.  
Also included with your set are the following:  
• Warranty Registration Card  
Standard Broadcast (VHF/UHF) or Cable TV (CATV) channel capability  
allows for viewing by antenna or cable.  
• Remote Control Transmitter  
Stereo capability, including a built-in audio amplifier and twin-speaker sys-  
tem, allows for the reception of TV programs broadcast in stereo sound.  
• Batteries for Remote Control Use.  
Please take a few minutes to complete your reg-  
istration card. The serial number for the TV is on  
the back of the set.  
Surf Button allows you to easily switch among only the channels that are of  
interest to you (the ones that you have programmed into the TV’s Surf control  
through the on-screen menu).  
Refer to the back of this manual for instructions  
in the cleaning and care of the TV.  
Timer allows you to set your TV to turn itself on and off once or daily like an  
alarm clock.  
End-of-Life Disposal  
Your new projection television and its packaging contain materials that can be recycled and reused. Specialized companies can  
recycle your product to increase the amount of reusable materials and minimize the amounts that need to be properly disposed. The  
batteries used by your product should not be thrown away when depleted but should be handed in and disposed of as small chemi-  
cal waste. Please find out about the local regulations concerning how to dispose of your old television, batteries, and packaging  
materials whenever it is time to replace them.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Menu • Adjusting the Picture  
ADJUSTING THE PICTURE  
o adjust your TV picture controls,  
Tselect a channel and follow these  
steps.  
BEGIN  
Press the MENU button on the  
remote control to show the on-screen  
menu. PICTURE will be highlighted.  
Press the CURSOR RIGHT button.  
BRIGHTNESS will be highlighted and  
an adjustment bar will be shown to the  
right.  
PICTURE  
SOUND  
FEATURES  
INSTALL  
BRIGHTNESS  
COLOR  
PICTURE  
SHARPNESS  
TINT  
PICTURE  
BRIGHTNESS  
COLOR  
30  
Press the CURSOR RIGHT or  
LEFT button to adjust the BRIGHT-  
NESS level of the picture. Or press the  
CURSOR DOWN button to select  
another picture control to adjust.  
PICTURE  
SHARPNESS  
PICTURE  
BRIGHTNESS  
COLOR  
PICTURE  
SHARPNESS  
30  
Press the i+ button to remove the  
menu from the screen.  
PICTURE  
BRIGHTNESS  
COLOR  
PICTURE  
SHARPNESS  
30  
+
AV  
i
SAP  
TV  
SMART HELP  
C  
4
2
5
8
0
3
6
PICTURE  
4
BRIGHTNESS  
COLOR  
PICTURE  
SHARPNESS  
TINT  
When the bar scale  
is centered, the  
control settings are at normal, mid-  
range levels. Picture adjustment con-  
trols are described here.  
9
7
SMART  
SMART  
30  
3
2
MENU  
SURF  
PICTURE  
BRIGHTNESS—adds or subtracts  
light from the darkest part of the  
picture.  
1
BRIGHTNESS  
COLOR  
PICTURE  
SHARPNESS  
TINT  
CH  
0
COLOR—adds or eliminates color.  
PICTURE—improves the detail of  
the lightest parts of the picture.  
3
P
INCR. SURR.  
A/CH  
PICTURE  
COLOR  
PICTURE  
SHARPNESS  
TINT  
COLOR TEMP  
SHARPNESS—improves the detail  
in the picture.  
PIP CH  
UP  
DN  
NORMAL  
TINT—adjusts the picture to obtain  
natural skin tones.  
COLOR TEMP—offers NOR-  
MAL, COOL, or WARM picture  
preferences.  
OR  
COLOR TEMP  
OR  
COLOR TEMP  
WARM  
COOL  
NORMAL—keeps whites, white.  
COOL—makes whites, bluish.  
WARM—makes whites, reddish.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Menu • The Dynamic Noise Reduction Control  
TURNING ON THE DYNAMIC NOISE REDUCTION (DNR) CONTROL  
ecause of poor cable reception or  
Bother difficulties, the picture can  
sometimes appear slightly “speckled”  
(an indication of signal noise in the  
picture). The DNR (Dynamic Noise  
Reduction) control can help eliminate  
this type of interference and improve  
the quality of the picture.  
PICTURE  
SOUND  
FEATURES  
INSTALL  
BRIGHTNESS  
COLOR  
PICTURE  
SHARPNESS  
TINT  
BEGIN  
PICTURE  
BRIGHTNESS  
COLOR  
Press the MENU button on the  
remote to show the on-screen menu.  
PICTURE will be highlighted.  
30  
PICTURE  
SHARPNESS  
TINT  
Press the CURSOR RIGHT but-  
ton to enter the PICTURE menu.  
PICTURE  
PICTURE  
SHARPNESS  
TINT  
COLOR TEMP  
DNR  
Press the CURSOR DOWN but-  
ton repeatedly until the DNR control  
is highlighted.  
ON  
Press the CURSOR RIGHT or  
LEFT button to switch DNR ON or  
OFF.  
+
i
SAP  
OR  
DNR  
OFF  
VCR  
ACC  
1
4
2
5
8
0
3
6
Press the i+ button to remove the  
menu from the screen.  
9
7
SMART  
SMART  
4
MENU  
SURF  
2
CH  
P
INCR. SURR.  
A/CH  
PIP CH  
UP  
DN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Menu • The ImageMax Control  
TURNING ON THE IMAGEMAX CONTROL  
mageMax helps you sharpen the  
Ipicture quality by making dark por-  
tions of the picture darker and light  
portions of the picture brighter.  
Follow these steps to turn ImageMax  
on.  
BEGIN  
PICTURE  
SOUND  
FEATURES  
INSTALL  
BRIGHTNESS  
COLOR  
PICTURE  
SHARPNESS  
TINT  
Press the MENU button on the  
remote control to show the on-screen  
menu. PICTURE will be highlighted.  
PICTURE  
BRIGHTNESS  
COLOR  
30  
PICTURE  
SHARPNESS  
TINT  
Press the CURSOR RIGHT but-  
ton to enter the PICTURE menu.  
Press the CURSOR DOWN but-  
ton repeatedly until the IMAGEMAX  
control is highlighted.  
PICTURE  
SHARPNESS  
TINT  
COLOR TEMP  
DNR  
IMAGEMAX  
ON  
ON  
Press the CURSOR RIGHT or  
LEFT button to switch between ON  
and OFF.  
+
i
SAP  
OR  
Press the i+ button to remove the  
menu from the screen.  
VCR  
ACC  
IMAGEMAX  
OFF  
1
4
2
5
8
0
3
6
9
7
SMART  
SMART  
4
MENU  
SURF  
2
CH  
PI
INCR. SURR.  
A/CH  
PIP CH  
UP  
DN  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Menu • The Convergence Control  
CONVERGE RED/BLUE  
he influence of magnetic fields  
Tand changes in the position of the  
TV may cause screen colors not to  
line up properly. The result on your  
TV screen will be red or blue colors  
appearing around the edges of  
images.  
PICTURE  
TINT  
COLOR TEMP  
DNR  
IMAGEMAX  
CONVERGENCE  
CONVERGE RED  
CONVERGE BLUE  
MULTIPOINT RED  
MULTIPOINT BLUE  
SAVE MULTIPOINT  
PICTURE  
CONVERGENCE  
If various images on the entire picture  
have red outlines, adjust the CON-  
VERGE RED control. Then if any red  
outlines remain, adjust the MULTI-  
POINT RED control.  
CONVERGE RED  
CONVERGE BLUE  
MULTIPOINT RED  
MULTIPOINT BLUE  
SAVE MULTIPOINT  
If various images on the entire picture  
have blue outlines, adjust the CON-  
VERGE BLUE control. Then if any  
blue outlines remain, adjust the MUL-  
TIPOINT BLUE control.  
CONVERGE RED  
Use the UNDO MULTIPOINT control  
if you want to restore the picture  
screen to the way it was before you  
made Multipoint adjustments.  
+
AV  
i
SAP  
TV  
VCR  
1
2
5
8
0
3
6
ACC  
4
CONVERGE RED  
9
7
NOTE: After turning the TV set on,  
allow it to warm up for 15 minutes  
before adjusting the Convergence  
controls.  
SMART  
SMART  
2
MENU  
SURF  
4
5
BEGIN  
Press the MENU button on the  
remote to show the on-screen menu.  
PICTURE will be highlighted.  
CH  
SMART HELP  
You can adjust the CON-  
VERGE BLUE control the  
same way you would the CON-  
VERGE RED control.  
PI
INCR. SURR.  
A/CH  
Press the CURSOR RIGHT but-  
ton to enter the PICTURE menu.  
PIP CH  
UP  
DN  
Press the CURSOR DOWN but-  
ton repeatedly until CONVER-  
GENCE is selected.  
Press the CURSOR RIGHT but-  
ton to enter the CONVERGENCE  
menu.  
Press the CURSOR RIGHT but-  
ton to enter CONVERGE RED mode.  
PICTURE  
CONVERGENCE  
CONVERGE RED  
CONVERGE BLUE  
MULTIPOINT RED  
MULTIPOINT BLUE  
SAVE MULTIPOINT  
Press the CURSOR LEFT,  
RIGHT, UP, or DOWN button to  
adjust the cross image until the color  
outline around it is gone.  
CONVERGE BLUE  
CONVERGE BLUE  
Press the i+ button to exit the  
menu from the screen.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Menu • The Convergence Control  
CONVERGE MULTIPOINT RED/BLUE  
f various images on the entire pic-  
Iture have red outlines, adjust the  
CONVERGE RED control. Then if  
any red outlines remain, adjust the  
MULTIPOINT RED control.  
PICTURE  
TINT  
CONVERGE RED  
CONVERGE BLUE  
MULTIPOINT RED  
MULTIPOINT BLUE  
SAVE MULTIPOINT  
Likewise, if various images on the  
entire picture have blue outlines,  
adjust the CONVERGE BLUE con-  
trol. Then if any blue outlines remain,  
adjust the MULTIPOINT BLUE con-  
trol.  
COLOR TEMP  
DNR  
IMAGEMAX  
CONVERGENCE  
PICTURE  
CONVERGENCE  
CONVERGE RED  
CONVERGE BLUE  
MULTIPOINT RED  
MULTIPOINT BLUE  
SAVE MULTIPOINT  
PICTURE  
CONVERGENCE  
Use the UNDO MULTIPOINT control  
if you want to restore the picture  
screen to the way it was before you  
made Multipoint adjustments.  
CONVERGE RED  
CONVERGE BLUE  
MULTIPOINT RED  
▲
MULTIPOINT BLUE  
SAVE MULTIPOINT  
É
NOTE: After turning the TV set on,  
allow it to warm up for 15 minutes  
before adjusting the Convergence  
controls.  
+
AV  
i
SAP  
TV  
VCR  
1
2
5
8
0
3
6
ACC  
BEGIN  
4
+
I : ADJUST  
• NAVIGATE  
9
7
Press the MENU button on the  
remote to show the on-screen menu.  
PICTURE will be highlighted.  
SMART  
SMART  
NOTE: To display three cross images hidden  
by the on-screen text, simply navigate to the  
bottom row and the cross images will be  
shown.  
6
MENU  
SURF  
4
1
2
Press the CURSOR RIGHT but-  
ton to enter the PICTURE menu.  
Press the CURSOR DOWN but-  
ton repeatedly until CONVER-  
GENCE is selected.  
CH  
I
INCR.
A/CH  
Press the CURSOR RIGHT but-  
ton to enter the CONVERGENCE  
menu.  
PIP CH  
UP  
DN  
Press the CURSOR DOWN but-  
ton repeatedly until MULTIPOINT  
RED is selected.  
Press the CURSOR RIGHT but-  
ton to enter NAVIGATE mode.  
Press the CURSOR LEFT,  
RIGHT, UP, or DOWN button to  
move to a cross image that has a color  
outline.  
Go to step 8 on the next page.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Menu • The Convergence Control  
CONVERGE MULTIPOINT RED/BLUE  
Press the i+ button to enter the  
ADJUST mode.  
Press the CURSOR LEFT,  
RIGHT, UP, or DOWN button to  
adjust the cross image until the color  
outline is gone.  
Press the i+ button to return to  
NAVIGATE mode.  
10  
+
I : NAVIGATE  
• ADJUST  
• NAVIGATE  
I+: ADJUST  
Repeat steps 7–10 until all mis-  
aligned crosses have been adjusted.  
PICTURE  
CONVERGENCE  
Press the MENU button to return  
to the CONVERGENCE menu.  
11  
CONVERGE RED  
CONVERGE BLUE  
MULTIPOINT RED  
MULTIPOINT BLUE  
SAVE MULTIPOINT  
Press the CURSOR DOWN but-  
ton repeatedly until SAVE MULTI-  
POINT is selected.  
12  
14  
PICTURE  
CONVERGENCE  
10  
8
CONVERGE RED  
CONVERGE BLUE  
MULTIPOINT RED  
MULTIPOINT BLUE  
SAVE MULTIPOINT  
+
Press the CURSOR RIGHT but-  
V  
i
SAP  
13  
TV  
ton to activate the storing of the  
Multipoint adjustments you have  
made.  
VCR  
ACC  
1
4
2
5
8
0
3
6
9
7
SMART  
SMART  
PICTURE  
CONVERGENCE  
14  
Press the i+ button to remove the  
menu from the screen.  
11  
CONVERGE RED  
CONVERGE BLUE  
MULTIPOINT RED  
MULTIPOINT BLUE  
SAVE MULTIPOINT  
MENU  
SURF  
13  
9
STORED  
CH  
P
INCR. SURR.  
A/CH  
SMART HELP  
You can adjust the MULTI-  
POINT BLUE control in the  
way you would adjust the MULTI-  
POINT RED control.  
PIP CH  
DN  
UP  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Menu • The Convergence Control  
UNDO MULTIPOINT  
he UNDO MULTIPOINT control  
Tallows you to restore the TV’s pic-  
ture screen to the way it was before  
you made Multipoint adjustments.  
BEGIN  
Press the MENU button to show  
the on-screen menu. PICTURE will  
be highlighted.  
PICTURE  
TINT  
COLOR TEMP  
DNR  
IMAGEMAX  
CONVERGENCE  
CONVERGE RED  
CONVERGE BLUE  
MULTIPOINT RED  
MULTIPOINT BLUE  
SAVE MULTIPOINT  
Press the CURSOR RIGHT but-  
ton to enter the PICTURE menu.  
PICTURE  
CONVERGENCE  
CONVERGE RED  
CONVERGE BLUE  
MULTIPOINT RED  
MULTIPOINT BLUE  
SAVE MULTIPOINT  
Press the CURSOR DOWN but-  
ton repeatedly until CONVER-  
GENCE is selected.  
Press the CURSOR RIGHT but-  
ton to enter the CONVERGENCE  
menu.  
PICTURE  
CONVERGENCE  
CONVERGE BLUE  
MULTIPOINT RED  
MULTIPOINT BLUE  
SAVE MULTIPOINT  
UNDO MULTIPOINT  
Press the CURSOR DOWN but-  
ton repeatedly until UNDO MULTI-  
POINT is selected.  
PICTURE  
CONVERGENCE  
+
i
SAP  
Press the CURSOR RIGHT but-  
ton to activate the restoring of the  
previous picture screen.  
CONVERGE BLUE  
MULTIPOINT RED  
MULTIPOINT BLUE  
SAVE MULTIPOINT  
UNDO MULTIPOINT  
7
VCR  
1
2
5
8
0
3
6
ACC  
4
RESTORED  
Press the i+ button to remove the  
menu from the screen.  
9
7
SMART  
SMART  
6
MENU  
SURF  
4
1
2
CH  
INCR.
A/CH  
PIP CH  
DN  
UP  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features Menu • The Timer Control  
12  
11  
1
2
10  
9
3
8
4
SETTING THE CLOCK  
7
5
6
our television comes with an on-  
Yscreen clock. During normal opera-  
tion, the clock appears on the screen  
when the i+ button is pressed or if the  
TIMER DISPLAY control is turned ON.  
BEGIN  
Press the MENU button on the  
remote control to show the on-screen  
menu.  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
FEATURES  
TIMER  
TIMER  
TIME  
AUTOLOCK  
PIP  
CLOSED CAP  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
Press the CURSOR DOWN button  
twice to highlight FEATURES.  
Press the CURSOR RIGHT button  
to enter the FEATURES menu.  
FEATURES  
TIMER  
Press the CURSOR RIGHT button  
again to shift the display left and high-  
light the TIME control.  
TIME  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
_ _:_ _  
Press the CURSOR RIGHT button  
again to highlight the time indicator area.  
FEATURES  
TIMER  
+
AV  
i
SAP  
Press the NUMBER buttons to  
enter the correct time. If you make a  
mistake entering the time, use the CUR-  
SOR LEFT or RIGHT button to move  
among the input slots to make correc-  
tions. NOTE: You may also use the  
CURSOR UP or DOWN button to cycle  
through digits to input the time.  
TV  
TIME  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
8:00 PM  
VC
4
2
5
8
0
3
6
8
9
7
6
SMART  
SMART  
MENU  
SURF  
Press the CURSOR UP or DOWN  
button to select AM or PM.  
1
CH  
Press the i+ button to remove the  
menu from the screen.  
4
2
5
7
PIP  
INCR. SURR.  
A/CH  
PIP CH  
UP  
DN  
SMART HELP  
FEATURES  
TIMER  
TIME  
• For single-digit entries, be  
sure to press 0 first and then the  
hour number.  
_ _:_ _  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
+
AV  
i
SAP  
• If you’d like, set the clock automati-  
cally using the AutoChron feature  
(page 4, Setup and Quick Use  
Guide).  
TV  
VCR  
ACC  
1
2
5
8
0
3
4
6
• Clock settings may be lost when the  
TV is unplugged or when AC power  
to the set is interrupted.  
9
7
SMART  
SMART  
•
The TIME (Clock) feature can be  
accessed directly by pressing the  
CLOCK button on the remote con-  
trol and following steps 5Ð10 to  
complete the task.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features Menu • The Timer Control  
12  
11  
1
2
10  
9
3
8
4
7
5
SETTING THE START TIME  
6
ou can set the TV to turn itself on  
Yat a specific time, just as you  
would an alarm clock. Follow these  
steps to set the Start Time.  
BEGIN  
Press the MENU button on the  
remote control to show the on-screen  
menu.  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
FEATURES  
TIMER  
Press the CURSOR DOWN but-  
TIME  
ton twice to highlight FEATURES.  
AUTOLOCK  
PIP  
CLOSED CAP  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
Press the CURSOR RIGHT but-  
ton to enter the FEATURES menu.  
FEATURES  
TIMER  
Press the CURSOR RIGHT but-  
ton again. Then press the CURSOR  
DOWN button once to highlight the  
START TIME control.  
TIME  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
8:01 PM  
Press the CURSOR RIGHT  
button again to highlight the time  
indicator area.  
FEATURES  
TIMER  
+
i
SAP  
TIME  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
VCR  
1
2
5
8
0
3
6
Press the NUMBER buttons to  
enter the correct time. If you make a  
mistake entering the time, use the  
CURSOR LEFT or RIGHT button to  
move among the time input slots to  
make corrections. NOTE: You can  
also use the CURSOR UP or DOWN  
button to cycle through digits to input  
the time.  
_ _:_ _  
ACC  
4
9
7
SMART  
SMART  
1
FEATURES  
TIMER  
MENU  
SURF  
TIME  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
8:00 AM  
3
CH  
4
Press the CURSOR UP or DOWN  
button to select AM or PM.  
5
2
INCR. S
4
A/CH  
Press the i+ button to remove the  
menu from the screen.  
PIP CH  
UP  
DN  
SMART HELP  
You can set STOP TIME  
similarly to the way you set  
START TIME. Instructions are on  
the next page.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features Menu • The Timer Control  
12  
11  
1
2
10  
9
3
8
4
7
5
SETTING THE STOP TIME  
6
se the START TIME control to  
Uset the TV to turn itself on at a  
specific time (see the previous page).  
The following steps will guide you in  
setting the TV to turn itself off.  
BEGIN  
Press the MENU button on the  
remote control to show the on-screen  
menu.  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
Press the CURSOR DOWN but-  
ton twice to highlight FEATURES.  
FEATURES  
TIMER  
TIME  
AUTOLOCK  
PIP  
CLOSED CAP  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
Press the CURSOR RIGHT  
button to enter the FEATURES  
menu.  
FEATURES  
TIMER  
Press the CURSOR RIGHT  
button again. Then press the CUR-  
SOR DOWN button twice to high-  
light the STOP TIME control.  
TIME  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
8:02 PM  
Press the CURSOR RIGHT  
button to highlight the time indicator  
area.  
FEATURES  
TIMER  
+
AV  
i
SAP  
TIME  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
VCR  
ACC  
8
1
4
2
5
8
0
3
6
Press the NUMBER buttons to  
enter the correct time. If you make a  
mistake entering the time, use the  
CURSOR LEFT or RIGHT button to  
move among the input slots to make  
corrections. NOTE: You can also use  
the CURSOR UP or DOWN button  
to cycle through digits to input the  
time.  
_ _:_ _  
9
7
SMART  
SMART  
6
TIMER  
MENU  
SURF  
TIME  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
1
9:30 AM  
CH  
Press the CURSOR UP or DOWN  
button to select AM or PM.  
2
INCR
A/CH  
4
Press the i+ button to remove the  
menu from the screen.  
7
PIP CH  
UP  
DN  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features Menu • The Timer Control  
12  
11  
1
2
10  
9
3
8
4
7
5
SELECTING THE CHANNEL  
6
ou can select a specific channel  
Ythat the television will tune to  
when the timer turns the set on.  
Follow these steps to select the chan-  
nel.  
BEGIN  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
Press the MENU button on the  
remote control to show the on-screen  
menu.  
FEATURES  
TIMER  
TIME  
AUTOLOCK  
PIP  
CLOSED CAP  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
Press the CURSOR DOWN but-  
ton twice to highlight FEATURES.  
FEATURES  
TIMER  
Press the CURSOR RIGHT but-  
ton to enter the FEATURES menu.  
TIME  
START TIME  
8:03 PM  
STOP TIME  
CHANNEL  
ACTIVATE  
Press the CURSOR RIGHT but-  
ton. Then press the CURSOR  
DOWN button repeatedly until the  
CHANNEL control is highlighted.  
FEATURES  
TIMER  
+
i
SAP  
Press the NUMBER buttons to  
enter the desired start-up channel. Or  
press the CURSOR RIGHT button  
repeatedly to enter the start-up channel  
you want.  
TIME  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
VCR  
1
2
5
8
0
3
6
ACC  
4
12  
9
7
SMART  
SMART  
MENU  
SURF  
Press the i+ button to remove the  
menu from the screen.  
CH  
2
INCR. S
A/CH  
4
PIP CH  
UP  
DN  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features Menu • The Timer Control  
12  
11  
1
2
10  
9
3
8
4
7
5
SETTING THE ACTIVATE CONTROL  
6
fter you have set the Time, Start  
ATime, Stop Time, and Start  
Channel, you must activate the Timer  
for it to operate. Your options are to  
set the Timer to work ONCE or  
DAILY. Set ACTIVATE to OFF if you  
don’t want to use the Timer.  
BEGIN  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TIMER  
Press the MENU button on the  
remote control to show the on-screen  
menu.  
AUTOLOCK  
PIP  
CLOSED CAP  
FEATURES  
TIMER  
TIME  
AUTOLOCK  
PIP  
CLOSED CAP  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
Press the CURSOR DOWN but-  
ton twice to highlight FEATURES.  
Press the CURSOR RIGHT but-  
ton to enter the FEATURES menu.  
FEATURES  
TIMER  
TIME  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
8:05 PM  
Press the CURSOR RIGHT but-  
ton again. Then press the CURSOR  
DOWN button repeatedly until the  
ACTIVATE control is highlighted.  
6
FEATURES  
TIMER  
+
V  
i
SAP  
Press the CURSOR RIGHT but-  
ton again to set ACTIVATE to  
ONCE, press the CURSOR RIGHT  
button again for DAILY, or press the  
CURSOR RIGHT button again to  
toggle ACTIVATE to OFF.  
TV  
VCR  
ACC  
TIME  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
1
4
2
5
8
0
3
6
9
7
OFF  
SMART  
SMART  
1
MENU  
SURF  
OR  
OR  
Press the i+ button to remove the  
ACTIVATE  
ACTIVATE  
ONCE  
menu from the screen.  
3
4
DAILY  
5
CH  
SMART HELP  
INCR
A/CH  
Before you set the  
TIMER controls, you must  
PIP CH  
UP  
DN  
set the TV’s clock manually with-  
in the Timer menu (see page 13)  
or by using the AutoChron feature  
described on page 4 of the Setup  
and Quick Use Guide.  
Try it! After following the steps  
on pages 13–18, use your TV to  
wake you up like a clock radio.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features Menu • The Timer Control  
12  
11  
1
2
10  
9
3
8
4
7
5
CONSTANTLY DISPLAYING THE TIME ON SCREEN  
6
fter you have set the TV’s clock,  
Ayou can use your TV to keep up  
with the time. The TIMER DISPLAY  
control allows you to permanently dis-  
play the time in the upper right corner  
of the screen.  
BEGIN  
Press the MENU button on the  
remote to show the on-screen menu.  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
FEATURES  
TIMER  
TIME  
Press the CURSOR DOWN but-  
AUTOLOCK  
PIP  
CLOSED CAP  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
ton twice to highlight FEATURES.  
Press the CURSOR RIGHT but-  
ton to enter the FEATURES menu.  
FEATURES  
TIMER  
Press the CURSOR RIGHT but-  
ton again. Then press the CURSOR  
DOWN button repeatedly until the  
DISPLAY control is highlighted.  
TIME  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
8:06 PM  
Press the CURSOR RIGHT or  
LEFT button to turn the TIMER  
DISPLAY ON or OFF.  
+
AV  
i
SAP  
FEATURES  
TIMER  
TV  
2
5
8
0
3
6
START TIME  
ACC  
STOP TIME  
CHANNEL  
ACTIVATE  
DISPLAY  
Press the i+ button to remove the  
menu from the screen.  
4
9
7
SMART  
SMART  
ON  
5
4
MENU  
SURF  
3
OR  
DISPLAY  
OFF  
CH  
INCR.
A/CH  
PIP CH  
UP  
DN  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features Menu • The AutoLock Control  
UNDERSTANDING AUTOLOCK  
he AutoLock feature can help par-  
Tents censor what their children  
watch on TV. AutoLock receives con-  
tent advisories sent by broadcasters or  
other program providers. After you  
program AutoLock, it can respond to  
the content advisories and block pro-  
grams that contain content which you  
may consider objectionable—offensive  
language, violence, or sexual situa-  
tions.  
AUTOLOCK  
TV RATING  
AUTOLOCK  
MOVIE RATING  
TV-Y  
TV-Y7  
TV-G  
TV-PG  
TV-14  
ON  
G
PG  
PG-13  
R
NC-17  
ON  
In this section, you’ll learn how to  
block channels and programming that  
is not rated, is unrated, or has no rat-  
ing. You will also find out how to turn  
these blocking features on or off.  
Following on this page are brief expla-  
nations of AutoLock terms and pro-  
gram ratings.  
MOVIE RATINGS  
(MOTION PICTURE ASSOCIATION  
OF AMERICA)  
TV PARENTAL GUIDELINES  
(TV BROADCASTERS)  
G (General Audience)—all ages admitted.  
Most parents will find programs that are  
rated G to be suitable for children of all  
ages. Such programs have little or no vio-  
lence, no strong language, and little or no  
sexual dialogue or sexual situations.  
TV-Y (All Children)—designed to be  
TV  
Terms  
appropriate for all children, especially  
Y ones ages 2–6. Programs rated TV-Y  
BLOCKING control—can be thought  
of as the “master switch” for  
are not expected to frighten younger children.  
AutoLock. This control affects the set-  
tings you have chosen for blocking  
programs according to movie ratings  
or TV ratings, or for blocking pro-  
grams that have no rating or are unrat-  
ed. When the BLOCKING control is  
OFF, the blocking or censoring of pro-  
grams is disabled. When the BLOCK-  
ING control is ON, blocking will  
occur according to the settings you  
have chosen.  
TV-Y7 (Directed to Older  
Children)—designed for children ages  
7 and older. Programs rated TV-Y7  
TV  
Y7  
PG (Parental Guidance Suggested)—  
contain material that parents may find  
unsuitable for younger children. Programs  
that are rated PG have one or more of the  
following: moderate violence, some sexual  
situations, infrequent coarse language, or  
some suggestive dialogue.  
may be more appropriate for children who  
have acquired the development skills needed  
to distinguish between make-believe and reali-  
ty. Such programs may include mild fantasy  
and comic violence (FV).  
TV-G (General Audience)—most par-  
ents will consider programs that are  
rated TV-G to be suitable for children  
TV  
G
PG-13 (Parents Strongly Cautioned)—  
contain material that parents may find  
unsuitable for children under the age of 13.  
Programs that are rated PG-13 have one or  
more of the following: violence, sexual situ-  
ations, coarse language, or suggestive dia-  
logue.  
BLOCK UNRATED control—if set  
to ON, blocks all unrated programs.  
Unrated programming consists of the  
kind of shows that the MPAA (Motion  
Picture Association of America) or the  
TV broadcasters have chosen not to  
rate.  
of all ages. Such programs have little or no  
violence, no strong language, and little or no  
sexual dialogue or sexual situations.  
TV-PG (Parental Guidance  
Suggested)—contain material that par-  
ents may find unsuitable for younger  
TV  
PG  
R (Restricted)—specifically designed for  
adults. Anyone under the age of 17 should  
view programs that are rated R only with an  
accompanying parent or adult guardian.  
Such programs have one or more of the fol-  
lowing: intense violence; intense sexual situ-  
ations; strong, coarse language; or intensely  
suggestive dialogue.  
NO RATING control—if set to ON,  
blocks all programming with no con-  
tent advisory data.  
Programming that has No Rating is not  
encoded with any rating information  
from the MPAA or the Parental  
Guidelines. Any programming could  
fall into this category.  
children. This type of programming has one or  
more of the following: moderate violence (V),  
some sexual situations (S), infrequent coarse  
language (L), or some suggestive dialogue  
(D).  
TV-14 (Parents Strongly Cautioned—  
contain material that many parents will  
find unsuitable for children under 14  
TV  
14  
NC-17 (No one under the age of 17 will be  
admitted)—should be viewed by adults  
only. Programs that are rated NC-17 have  
graphic violence; explicit sex; or crude,  
indecent language.  
You can also block individual chan-  
nels using the BLOCK CHANNEL  
control.  
years of age. Such programs have one or more  
of the following: intense violence (V); intense  
sexual situations (S); strong, coarse language  
(L); or intensely suggestive dialogue (D).  
X (Adults Only)—contain one or more of  
the following: very graphic violence, very  
graphic and explicit or indecent sexual acts,  
or very coarse and intensely suggestive lan-  
guage.  
TV-MA (Mature Audience Only)—  
specifically designed to be viewed by  
adults and therefore may be unsuitable  
for children under 17. Such programs  
TV  
MA  
have one or more of the following: graphic  
violence (V); explicit sexual situations (S); or  
crude, indecent language (L).  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features Menu • The AutoLock Control  
SETTING UP THE ACCESS CODE  
utoLockallows parents to block  
Achannels they think children  
should not watch. A channel blocked  
by the AUTOLOCK control cannot be  
viewed until a correct access code is  
used to unlock the channel for view-  
ing. Follow these steps to set up your  
Access Code.  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
TIME  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
BEGIN  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
Press the MENU button on the  
remote control to show the on-screen  
menu.  
ACCESS CODE  
- - - -  
Press the CURSOR DOWN but-  
ton twice to highlight FEATURES.  
+
i
SAP  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
9
ACCESS CODE  
- - - -  
VCR  
ACC  
1
4
2
5
8
0
3
6
Press the CURSOR RIGHT but-  
ton to enter the FEATURES menu.  
Then press the CURSOR DOWN  
button once to highlight the  
5
7
7
9
6
8
SMART  
SMART  
4
AUTOLOCK control.  
MENU  
SURF  
3
1
Press the CURSOR RIGHT but-  
ton to highlight ACCESS CODE.  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
ACCESS CODE  
X X X X  
CH  
Press 0,7,1,1 on the remote con-  
trol. INCORRECT will appear on the  
screen.  
INCR
A/CH  
Press 0,7,1,1 on the remote con-  
trol again. ENTER NEW CODE will  
appear on the screen.  
FEATURES  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
ACCESS CODE  
- - - -  
TIMER  
ACCESS CODE  
X X X X  
ACCESS CODE  
X X X X  
INCORRECT  
AUTOLOCK  
PIP  
CLOSED CAP  
Enter a new four-digit code  
using the number buttons. CONFIRM  
CODE will appear on the screen.  
Enter your new four-digit code  
again. CORRECT will flash on the  
screen briefly.  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
FEATURES  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
CONFIRM  
CODE  
- - - -  
TIMER  
AUTOLOCK  
PIP  
ENTER  
NEW CODE  
- - - -  
ENTER  
NEW CODE  
X X X X  
Press the i+ button to remove the  
menu from the screen.  
CLOSED CAP  
SMART HELP  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
Parents, it isn’t possible for  
your child to unblock a channel  
CONFIRM  
CODE  
X X X X  
CONFIRM  
CODE  
X X X X  
CORRECT  
without knowing your access code or  
changing it to a new one. If you discov-  
er that your access code has been  
changed, you can assume that blocked  
channels may have been viewed.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features Menu • The AutoLock Control  
BLOCKING CHANNELS  
fter you have set your personal  
Aaccess code (see the previous  
page), you are ready to select the  
channels or program sources you  
want to block.  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
TIME  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
BEGIN  
Press the MENU button on the  
remote control to show the on-screen  
menu.  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
ACCESS CODE  
- - - -  
Press the CURSOR DOWN but-  
ton twice to highlight FEATURES.  
9
Press the CURSOR RIGHT  
button to enter the FEATURES  
menu. Then press the CURSOR  
DOWN button once to highlight the  
AUTOLOCK control.  
+
V  
i
SAP  
FEATURES  
TIMER  
TV  
ACCESS CODE  
- - - -  
VCR  
1
2
5
8
0
3
6
AUTOLOCK  
PIP  
CLOSED CAP  
5
ACC  
4
7
9
8
4
SMART  
SMART  
1
6
Press the CURSOR RIGHT but-  
ton to highlight ACCESS CODE.  
MENU  
SURF  
3
Enter your four-digit ACCESS  
CODE. CORRECT will flash very  
briefly and the menu will move to the  
left with BLOCK CHANNEL high-  
lighted.  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
ACCESS CODE  
X X X X  
CH  
INCR.
A/CH  
Press the CURSOR RIGHT but-  
ton to highlight the TV’s available  
channels.  
FEATURES  
AUTOLOCK  
BLOCK CHANNEL  
PIP CH  
UP  
DN  
AV2  
AV3  
ALL  
1
SETUP CODE  
CLEAR ALL  
MOVIE RATING  
TV RATING  
Press the CURSOR UP or  
DOWN button to highlight the chan-  
nel you want to block.  
2
Press the CURSOR RIGHT but-  
ton to block the channel. A padlock  
image will appear to the right of the  
channel number.  
FEATURES  
AUTOLOCK  
BLOCK CHANNEL  
FEATURES  
AUTOLOCK  
FEATURES  
AUTOLOCK  
BLOCK CHANNEL  
AV2  
BLOCK CHANNEL  
SETUP CODE  
CLEAR ALL  
MOVIE RATING  
TV RATING  
AV2  
12  
13  
14  
15  
16  
SETUP CODE  
CLEAR ALL  
MOVIE RATING  
TV RATING  
AV3  
ALL  
1
SETUP CODE  
CLEAR ALL  
MOVIE RATING  
TV RATING  
AV3  
ALL  
1
Repeat steps 7 and 8 for any chan-  
nels you want to block from view-  
ing.  
2
2
Press the i+ button to remove the  
menu from the screen.  
FEATURES  
AUTOLOCK  
BLOCK CHANNEL  
12  
13  
14  
15  
16  
SETUP CODE  
CLEAR ALL  
MOVIE RATING  
TV RATING  
SMART HELP  
Use BLOCK CHANNEL to  
prevent the viewing of programs  
coming from a VCR, DVD, or other  
accessory device hooked up to the AV,  
component, or S-VIDEO inputs.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features Menu • The AutoLock Control  
BLOCKING BY MOVIE RATING  
fter you have set your personal  
Aaccess code (see page 20), you  
can block programs by specific movie  
ratings.  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
BEGIN  
FEATURES  
TIMER  
TIME  
AUTOLOCK  
PIP  
CLOSED CAP  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
Press the MENU button on the  
remote control to show the on-screen  
menu.  
Press the CURSOR DOWN but-  
ton twice to highlight FEATURES.  
FEATURES  
TIMER  
ACCESS CODE  
- - - -  
AUTOLOCK  
PIP  
CLOSED CAP  
Press the CURSOR RIGHT but-  
ton to enter the FEATURES menu.  
Then press the CURSOR DOWN  
button once to highlight the  
9
+
V  
i
SAP  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
TV  
AUTOLOCK control.  
ACCESS CODE  
- - - -  
VCR  
ACC  
1
4
2
5
8
0
3
6
5
Press the CURSOR RIGHT but-  
ton to highlight ACCESS CODE.  
7
9
8
4
SMART  
SMART  
7
1
Enter your four-digit ACCESS  
CODE. CORRECT will flash very  
briefly in red and the menu will move  
to the left with BLOCK CHANNEL  
highlighted.  
MENU  
SURF  
3
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
ACCESS CODE  
X X X X  
CH  
Press the CURSOR DOWN but-  
ton repeatedly until MOVIE RATING  
is highlighted.  
INCR. SU
A/CH  
FEATURES  
AUTOLOCK  
BLOCK CHANNEL  
PIP CH  
Press the CURSOR RIGHT but-  
ton and the Rating menu will shift to  
the left with G highlighted.  
UP  
DN  
AV2  
AV3  
ALL  
1
SETUP CODE  
CLEAR ALL  
MOVIE RATING  
TV RATING  
2
Press the CURSOR UP or  
DOWN button to highlight each rat-  
ing you want. Then press the CUR-  
SOR RIGHT button to turn the rat-  
ing ON or OFF. Turning the rating on  
will block such programs from being  
seen.  
FEATURES  
AUTOLOCK  
AUTOLOCK  
MOVIE RATING  
BLOCK CHANNEL  
SETUP CODE  
CLEAR ALL  
MOVIE RATING  
TV RATING  
G
PG  
PG-13  
R
NC-17  
G
PG  
PG-13  
R
NC-17  
OFF  
AV3  
ALL  
1
Press the i+ button to remove the  
menu from the screen.  
2
AUTOLOCK  
MOVIE RATING  
SMART HELP  
G
PG  
ON  
AV3  
ALL  
1
PG-13  
R
NC-17  
When a rating is set to be  
turned on (blocked), all higher  
ratings will also be blocked auto-  
matically. For example, if the R rat-  
ing is turned on, the NC-17 and X  
ratings also will be turned on.  
2
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features Menu • The AutoLock Control  
BLOCKING BY TV RATING  
ou also can block programs by  
Yspecific TV ratings. Follow these  
simple steps.  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
FEATURES  
TIMER  
BEGIN  
TIME  
AUTOLOCK  
PIP  
CLOSED CAP  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
Press the MENU button on the  
remote control to show the on-screen  
menu.  
Press the CURSOR DOWN  
button twice to highlight FEA-  
TURES.  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
ACCESS CODE  
- - - -  
Press the CURSOR RIGHT  
button to enter the FEATURES  
menu. Then press the CURSOR  
DOWN button once to highlight the  
AUTOLOCK control.  
+
V  
i
SAP  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
TV  
ACCESS CODE  
- - - -  
VCR  
ACC  
1
4
2
5
8
0
3
6
7
9
Press the CURSOR RIGHT  
button to highlight ACCESS CODE.  
SMART  
SMART  
7
4
FEATURES  
TIMER  
MENU  
SURF  
3
ACCESS CODE  
X X X X  
AUTOLOCK  
PIP  
CLOSED CAP  
Enter your four-digit ACCESS  
CODE.  
Press the CURSOR DOWN  
button repeatedly until TV RATING  
is highlighted.  
CH  
FEATURES  
AUTOLOCK  
BLOCK CHANNEL  
FEATURES  
AUTOLOCK  
NC
A/CH  
Press the CURSOR RIGHT  
button to enter the TV RATING  
menu.  
AV2  
AV3  
ALL  
1
BLOCK CHANNEL  
SETUP CODE  
CLEAR ALL  
MOVIE RATING  
TV RATING  
TV-Y  
TV-Y7  
TV-G  
TV-PG  
TV-14  
SETUP CODE  
CLEAR ALL  
MOVIE RATING  
TV RATING  
PIP CH  
UP  
DN  
2
Press the CURSOR UP or  
DOWN button to select a rating.  
Press the CURSOR RIGHT or  
LEFT button to turn the block on  
the rating ON or OFF.  
AUTOLOCK  
TV RATING  
AUTOLOCK  
TV RATING  
TV-Y  
TV-Y7  
TV-G  
TV-PG  
TV-14  
TV-Y  
TV-Y7  
TV-G  
TV-PG  
TV-14  
OFF  
AV3  
ALL  
1
ON  
AV3  
ALL  
1
NOTE: More specific subratings (for  
violence, sexual content, dialogue, or  
fantasy violence) are available for  
TV-Y7, TV-PG, TV-14, and  
TV-MA.  
2
2
TV-Y (All Children)—designed to be appropriate for all children, especially ones ages 2–6. Programs rated TV-Y are  
not expected to frighten younger children.  
To access these subratings, press  
10  
TV-Y7 (Directed to Older Children)—designed for children ages 7 and older. Programs rated TV-Y7 may be more  
appropriate for children who have acquired the development skills needed to distinguish between make-believe and real-  
ity. Such programs may include mild fantasy and comic violence (FV).  
the CURSOR RIGHT button. Press  
the CURSOR UP or DOWN button  
to select the subrating that you want to  
block or unblock. Then press the  
CURSOR RIGHT or LEFT button  
to turn the block on the subrating ON  
or OFF.  
TV-G (General Audience)—likely to be considered suitable for children of all ages. Such programs have little or no  
violence, no strong language, and little or no sexual dialogue or sexual situations.  
TV-PG (Parental Guidance Suggested)—contain material that parents may find unsuitable for younger children. This  
type of programming has one or more of the following: moderate violence (V), some sexual situations (S), infrequent  
coarse language (L), or some suggestive dialogue (D).  
TV-14 (Parents Strongly Cautioned)—contain material that many parents will find unsuitable for children under 14  
years of age. Such programs have one or more of the following: intense violence (V); intense sexual situations (S);  
strong, coarse language (L); or intensely suggestive dialogue (D).  
11  
Press the i+ button to remove the  
menu from the screen.  
TV-MA (Mature Audience Only)—specifically designed to be viewed by adults and therefore may be unsuitable for  
children under 17. Such programs have one or more of the following: graphic violence (V); explicit sexual situations  
(S); or crude, indecent language (L).  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features Menu • The AutoLock Control  
TURNING THE BLOCKING CONTROL ON OR OFF  
he BLOCKING control can be  
Tthought of as the “master switch”  
for AutoLock. Use it to turn on or off  
all of the settings you have chosen to  
block programming.  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
TIME  
BEGIN  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
Press the MENU button on the  
remote control to show the on-screen  
menu.  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
Press the CURSOR DOWN but-  
ton twice to highlight FEATURES.  
ACCESS CODE  
- - - -  
Press the CURSOR RIGHT  
button to enter the FEATURES  
menu. Then press the CURSOR  
DOWN button once to highlight the  
AUTOLOCK control.  
9
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
+
V  
i
SAP  
TV  
ACCESS CODE  
- - - -  
VCR  
ACC  
1
4
2
5
8
0
3
6
5
Press the CURSOR RIGHT  
button to highlight ACCESS CODE.  
7
9
SMART  
SMART  
7
1
4
MENU  
SURF  
3
Enter your four-digit ACCESS  
CODE.  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
ACCESS CODE  
X X X X  
Press the CURSOR DOWN but-  
ton repeatedly until BLOCK  
OPTIONS is highlighted.  
CH  
2
INR
A/CH  
3
Press the CURSOR RIGHT but-  
ton to enter the BLOCK OPTIONS  
menu. BLOCKING will be highlight-  
ed.  
PIP CH  
UP  
DN  
FEATURES  
AUTOLOCK  
BLOCK CHANNEL  
AV2  
AV3  
ALL  
1
SETUP CODE  
CLEAR ALL  
MOVIE RATING  
TV RATING  
Press the CURSOR RIGHT or  
LEFT button to toggle BLOCKING  
ON or OFF.  
2
Press the i+ button to remove  
the menu.  
FEATURES  
AUTOLOCK  
SETUP CODE  
BLOCKING  
BLOCK UNRATED  
NO RATING  
CLEAR ALL  
MOVIE RATING  
TV RATING  
BLOCK OPTIONS  
AUTOLOCK  
BLOCK OPTIONS  
AUTOLOCK  
BLOCK OPTIONS  
BLOCKING  
BLOCK UNRATED  
NO RATING  
BLOCKING  
BLOCK UNRATED AV3  
ON  
OFF  
AV3  
ALL  
1
NO RATING  
ALL  
1
2
2
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features Menu • The AutoLock Control  
BLOCKING UNRATED BROADCASTS  
n addition to blocking rated pro-  
Igrams or channels, you may also  
choose to block all programming that  
is unrated.  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
TIME  
BEGIN  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
Press the MENU button on the  
remote control to show the on-screen  
menu.  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
Press the CURSOR DOWN  
button twice to highlight FEA-  
TURES.  
ACCESS CODE  
- - - -  
Press the CURSOR RIGHT  
button to enter the FEATURES  
menu. Then press the CURSOR  
DOWN button once to highlight the  
AUTOLOCK control.  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
+
V  
i
SAP  
TV  
ACCESS CODE  
- - - -  
VCR  
1
2
5
8
0
3
6
ACC  
4
7
9
SMART  
SMART  
Press the CURSOR RIGHT but-  
ton again to highlight ACCESS  
CODE.  
7
4
MENU  
SURF  
3
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
Enter your four-digit ACCESS  
CODE.  
ACCESS CODE  
X X X X  
9
CH  
Press the CURSOR DOWN but-  
ton repeatedly until BLOCK  
OPTIONS is highlighted.  
2
INCR.
A/CH  
3
6
8
PIP CH  
Press the CURSOR RIGHT  
button to enter the BLOCK  
OPTIONS menu.  
UP  
DN  
FEATURES  
AUTOLOCK  
BLOCK CHANNEL  
AV2  
AV3  
ALL  
1
SETUP CODE  
CLEAR ALL  
MOVIE RATING  
TV RATING  
Press the CURSOR DOWN  
button once to select BLOCK  
UNRATED.  
2
Press the CURSOR RIGHT or  
LEFT button to turn BLOCK  
UNRATED ON or OFF.  
FEATURES  
AUTOLOCK  
SETUP CODE  
AUTOLOCK  
BLOCK OPTIONS  
AUTOLOCK  
BLOCK OPTIONS  
BLOCKING  
BLOCK UNRATED  
NO RATING  
BLOCKING  
BLOCK UNRATED  
NO RATING  
BLOCKING  
BLOCK UNRATED  
NO RATING  
OFF  
OFF  
ON  
ON  
Press the i+ button to remove  
10  
CLEAR ALL  
MOVIE RATING  
TV RATING  
BLOCK OPTIONS  
the menu.  
SMART HELP  
Channel 12  
Blocked by AutoLock  
Unrated  
Access Code  
- - - -  
When the BLOCK UNRATED control is turned  
on, attempts to view unrated programs will bring a  
message like this to the screen. To watch the program,  
enter your access code or go into the BLOCK OPTIONS  
menu and turn the BLOCK UNRATED control OFF.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features Menu • The AutoLock Control  
BLOCKING BROADCASTS THAT HAVE NO RATING  
ome programs contain no content  
Sadvisories from the Motion  
Picture Association of America or the  
television broadcasters (see page 19  
for more on content advisories and  
ratings). To block such programs, fol-  
low these steps.  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
TIME  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
BEGIN  
Press the MENU button on the  
remote to show the on-screen menu.  
FEATURES  
TIMER  
ACCESS CODE  
- - - -  
AUTOLOCK  
PIP  
CLOSED CAP  
Press the CURSOR DOWN but-  
ton twice to highlight FEATURES.  
10  
Press the CURSOR RIGHT  
button to enter the FEATURES  
menu. Then press the CURSOR  
DOWN button once to highlight the  
AUTOLOCK control.  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
+
V  
i
SAP  
TV  
ACCESS CODE  
- - - -  
VCR  
ACC  
1
4
2
5
8
0
3
6
5
7
9
SMART  
SMART  
1
7
Press the CURSOR RIGHT  
button to highlight the ACCESS  
CODE input area.  
4
MENU  
SURF  
3
9
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
Enter your four-digit ACCESS  
CODE.  
ACCESS CODE  
X X X X  
CH  
Press the CURSOR DOWN  
button repeatedly until BLOCK  
OPTIONS is highlighted.  
INCR.
A/CH  
PIP CH  
Press the CURSOR RIGHT but-  
ton to enter the BLOCK OPTIONS  
menu.  
UP  
DN  
FEATURES  
AUTOLOCK  
BLOCK CHANNEL  
AV2  
AV3  
ALL  
1
SETUP CODE  
CLEAR ALL  
MOVIE RATING  
TV RATING  
Press the CURSOR DOWN  
button twice to highlight NO RAT-  
ING.  
2
Press the CURSOR RIGHT or  
LEFT button to turn NO RATING  
ON or OFF.  
FEATURES  
AUTOLOCK  
SETUP CODE  
AUTOLOCK  
BLOCK OPTIONS  
AUTOLOCK  
BLOCK OPTIONS  
BLOCKING  
BLOCK UNRATED  
NO RATING  
BLOCKING  
BLOCK UNRATED  
NO RATING  
BLOCKING  
BLOCK UNRATED  
NO RATING  
OFF  
OFF  
OFF  
ON  
ON  
ON  
10  
Press the i+ button to remove the  
menu.  
CLEAR ALL  
MOVIE RATING  
TV RATING  
BLOCK OPTIONS  
SMART HELP  
Channel 12  
Blocked by AutoLock  
No rating  
Access Code  
- - - -  
If the NO RATING control is turned on, all  
programs having no content advisory information  
will activate a screen like this. To watch the channel,  
enter your access code or turn the NO RATING option  
OFF.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features Menu • The AutoLock Control  
REVIEWING YOUR SETTINGS  
ou can access a screen that  
MOVIE RATING -  
TV RATING -  
-
-
R
NC17  
X
Y7  
-
PG  
14  
MA  
Yshows your AutoLock settings.  
Press the i+ button on your  
remote twice. Your AutoLock set-  
tings will appear on the screen.  
BEGIN  
BLOCK UNRATED ON  
NO RATING OFF  
NOTE: If you have blocked specific  
subratings, such as V for Violence in  
the TV-PG category, these blocked  
subratings will not appear in the  
review. Nonetheless, the subratings  
are still blocked according to your  
selections.  
2
1
After a few seconds, the set-  
tings will leave the screen auto-  
matically, or you can press the i+  
button to remove them from the  
screen.  
+
i
SAP  
TV  
VCR  
1
2
5
8
0
3
6
ACC  
4
9
7
SMART  
SMART  
MENU  
SURF  
SMART HELP  
The AutoLock review  
screen will appear only if  
CH  
you have turned ON the BLOCK-  
ING control (see page 24).  
PIP  
INCR. SURR.  
A/CH  
PIP CH  
UP  
DN  
MOVIE RATING—shows all the movie ratings that you have chosen to block within the  
MOVIE RATING control. NOTE: If a lower rating is blocked, higher ratings will also be  
blocked automatically. For example, if you block R-rated programs, those that are rated X  
will also be blocked.  
MOVIE RATING -  
TV RATING -  
-
-
R
NC17  
X
Y7  
-
PG  
14  
MA  
TV RATING—shows all the TV ratings that you have chosen to block within the TV RAT-  
ING control. NOTE: If a lower rating is blocked, higher ratings will also be blocked auto-  
matically. For example, if you block TV-PG-rated programs, those rated TV-14 and TV-MA  
will also be blocked. The TV rating controls also have subratings for Violence (V), Fantasy  
Violence (FV), Sexual Situations (S), Coarse Language (L), and Suggestive Language (D).  
If you turn off a main rating but turn on a subrating of that main rating control, programs  
having the subrating will be blocked; however, the main rating will not appear within the  
AutoLock review menu because you did not turn it ON.  
BLOCK UNRATED ON  
NO RATING OFF  
BLOCK UNRATED—shows whether you have turned this control ON or OFF.  
BLOCK NO RATING—shows whether you have turned this control ON or OFF.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features Menu • The AutoLock Control  
CLEARING ALL BLOCKED CHANNELS  
he CLEAR ALL control will  
Tallow you to remove all channel  
blocks that have been turned on  
through the BLOCK CHANNEL  
control. To clear all channel  
blocks, follow the simple steps  
below.  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TIMER  
BEGIN  
AUTOLOCK  
PIP  
CLOSED CAP  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
Press the MENU button on the  
TIME  
remote to show the on-screen menu.  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
Press the CURSOR DOWN  
button twice to highlight FEA-  
TURES.  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
Press the CURSOR  
ACCESS CODE  
- - - -  
RIGHT.button to enter the FEA-  
TURES menu. Then press the  
CURSOR DOWN button once to  
highlight the AUTOLOCK control.  
+
i
SAP  
FEATURES  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
Press the CURSOR RIGHT  
button again to highlight ACCESS  
CODE.  
TV  
ACCESS CODE  
- - - -  
VCR  
ACC  
1
4
2
5
8
0
3
6
7
9
Enter your four-digit  
ACCESS CODE.  
SMART  
SMART  
7
4
MENU  
SURF  
3
Press the CURSOR DOWN  
button twice to highlight CLEAR  
ALL.  
FEATURES  
TIMER  
ACCESS CODE  
X X X X  
AUTOLOCK  
PIP  
CLOSED CAP  
Press the CURSOR RIGHT  
button. The CLEAR ALL option  
will display the word CLEARED.  
All blocked channels will then be  
viewable.  
CH  
INCR
A/CH  
PIP CH  
UP  
DN  
Press the i+ button to remove  
FEATURES  
AUTOLOCK  
BLOCK CHANNEL  
the menu.  
AV2  
AV3  
ALL  
1
SETUP CODE  
CLEAR ALL  
MOVIE RATING  
TV RATING  
2
SMART HELP  
This control clears only  
the blocks placed on channels  
through use of the BLOCK  
CHANNEL control and will not  
turn off the MOVIE RATING, TV  
RATING, BLOCK UNRATED, or  
NO RATING control settings.  
FEATURES  
AUTOLOCK  
FEATURES  
AUTOLOCK  
BLOCK CHANNEL  
BLOCK CHANNEL  
SETUP CODE  
CLEAR ALL  
MOVIE RATING  
TV RATING  
BLOCK OPTIONS  
SETUP CODE  
CLEAR ALL  
MOVIE RATING  
TV RATING  
BLOCK OPTIONS  
CLEARED  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features Menu • The Closed Captioning Control  
CC  
USING THE CLOSED CAPTIONING CONTROL  
losed Captioning (CC) allows  
SMART HELP  
Cyou to read the voice content of  
television programs on the TV screen.  
Designed to help the hearing  
impaired, this feature uses on-screen  
text boxes to show dialogue and con-  
versations while the TV program is in  
progress.  
Not all TV programs and product commercials are broadcast with  
Closed Captioning (CC). Nor are all Closed Captioning MODEs neces-  
sarily being used by broadcast stations during a program offering Closed  
Captioning. Refer to your area’s TV program listings for the stations and  
times of shows being broadcast with Closed Captioning.  
BEGIN  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TIMER  
Press the MENU button on the  
remote control to show the on-screen  
menu.  
AUTOLOCK  
PIP  
CLOSED CAP  
FEATURES  
TIMER  
TIME  
AUTOLOCK  
PIP  
CLOSED CAP  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
Press the CURSOR DOWN but-  
ton twice to highlight FEATURES.  
Press the CURSOR RIGHT but-  
ton to enter the FEATURES menu.  
FEATURES  
TIMER  
CAPTION MODE  
CC DISPLAY  
Press the CURSOR DOWN but-  
ton repeatedly until CLOSED CAP is  
highlighted.  
AUTOLOCK  
PIP  
CLOSED CAP  
Press the CURSOR RIGHT but-  
ton. The menu will shift to the left  
and CAPTION MODE will be high-  
lighted. Then press the CURSOR  
RIGHT button again to highlight the  
CAPTION MODEs area.  
FEATURES  
CLOSED CAP  
+
i
SAP  
CC1  
CC2  
CC3  
CAPTION MODE  
CC DISPLAY  
TV  
VCR  
ACC  
1
4
2
5
8
0
3
6
FEATURES  
CLOSED CAP  
9
7
CAPTION MODE  
CC DISPLAY  
CC1  
CC2  
CC3  
SMART  
SMART  
Press the CURSOR UP or  
DOWN button to select a CAPTION  
MODE.  
5
MENU  
SURF  
3
Press the i+ button to remove the  
menu from the screen.  
CC1  
CC2  
CH  
CC3  
CC4  
CC MUTE  
TXT1  
TXT2  
TXT3  
TXT4  
INCR
A/CH  
6
SMART HELP  
PIP CH  
UP  
DN  
CC DISPLAY—turns text  
on or off if the TV station broad-  
casting on the channel is making  
Closed Captioning available.  
Highlight CC DISPLAY and press the  
CURSOR RIGHT button to turn this  
feature on or off.  
TEXT Mode  
Example Display -  
The TV program is  
CAPTION Mode  
Example Display  
blocked by the Text screen.  
CC MUTE—turns the Closed  
Captioning mode on whenever the  
MUTE button on the remote control is  
pushed. Select CC MUTE in the on-  
screen menu to turn this feature on.  
Closed Captioning cannot be used on  
the CVI (Component Video input)  
source.  
CLOSE CAPTION PROGRAMS ON WXYZ  
ALL ITEMS ARE EASTERN STANDARD TIME (EST)  
CHECK LOCAL LISTINGS  
FOR TIMES IN YOUR AREA  
6:00 TOP OF THE MORNING  
10:00 THE BEST LITTLE CALL-IN SHOW EVER  
12:00 NOONDAY NEWS  
1:30 AS YOUR LIFE TURNS MY WORLD AROUND  
6:00 WORLD NEWS FOR TODAY  
9:00 PLAYHOUSE MOVIE OF THE WEEK  
JOHN: Why did they move the  
meeting up to this week?  
MARSHA: I don't know, but they  
are pushing to close the deal.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Menu • Treble, Bass, and Balance  
ADJUSTING THE TREBLE, BASS, AND BALANCE  
esides the normal volume level  
Bcontrol, your TV also has individ-  
ual sound-adjustment controls. You  
can use TREBLE (high frequency),  
BASS (low frequency), and Speaker  
BALANCE to further adjust the sound  
playback of TV programs.  
BEGIN  
Press the MENU button on the  
remote control to show the on-screen  
menu.  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TREBLE  
BASS  
BALANCE  
AVL  
INCR. SURROUND  
SOUND  
TREBLE  
BASS  
30  
Press the CURSOR DOWN but-  
ton once to highlight SOUND.  
BALANCE  
AVL  
INCR. SURROUND  
Press the CURSOR RIGHT but-  
ton to enter the SOUND menu.  
SOUND  
TREBLE  
BASS  
BALANCE  
AVL  
INCR. SURROUND  
Press the CURSOR RIGHT or  
LEFT button to adjust the TREBLE  
level of the television’s sound.  
30  
After adjusting the TREBLE con-  
trol, press the CURSOR DOWN  
button to select another sound adjust-  
ment: BASS or BALANCE. Then  
Press the CURSOR RIGHT or  
LEFT button to adjust the selected  
control.  
6
SOUND  
TREBLE  
BASS  
+
V  
i
SAP  
TV  
VCR  
ACC  
1
4
2
5
8
0
3
6
BALANCE  
AVL  
INCR. SURROUND  
0
9
7
SMART  
SMART  
1
4
Press the i+ button to remove  
the menu from the screen.  
MENU  
SURF  
3
CH  
SMART HELP  
2
INCR
A/CH  
5
Remember, when the bar  
scale is centered, speaker  
sound BALANCE is centered  
between the TV’s left and right side  
speakers.  
PIP CH  
UP  
DN  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Menu • AVL (Audio Volume Leveler)  
USING THE AVL (AUDIO VOLUME LEVELER) CONTROL  
ou may have noticed the peaks  
Yand valleys of sound that occur  
between program changes or at com-  
mercial breaks. The volume levels  
often vary considerably. By turning  
on the AVL (Audio Volume Leveler)  
control, you can make your TV pro-  
duce a more consistent volume level.  
Follow these steps to turn the AVL on.  
PICTURE  
SOUND  
TREBLE  
BASS  
BEGIN  
FEATURES  
INSTALL  
BALANCE  
AVL  
INCR. SURROUND  
SOUND  
TREBLE  
BASS  
Press the MENU button on the  
remote control to show the on-screen  
menu.  
30  
BALANCE  
AVL  
INCR. SURROUND  
Press the CURSOR DOWN but-  
ton once to highlight SOUND.  
SOUND  
Press the CURSOR RIGHT but-  
ton to enter the SOUND menu.  
TREBLE  
BASS  
BALANCE  
AVL  
INCR. SURROUND  
OFF  
ON  
Press the CURSOR DOWN but-  
ton repeatedly until AVL is highlight-  
ed. Then press the CURSOR  
RIGHT or LEFT button to turn  
AVL ON or OFF.  
+
V  
i
SAP  
OR  
TV  
AVL  
VCR  
ACC  
1
4
2
5
8
0
3
6
Press the i+ button to remove the  
menu from the screen.  
9
7
SMART  
SMART  
MENU  
SURF  
3
CH  
INCR. S
A/CH  
4
PIP CH  
UP  
DN  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Menu • Incredible Surround  
USING INCREDIBLE SURROUND  
he Incredible Surround feature  
Twill boost the TV’s sound by mak-  
ing the sound broader and fuller. Set  
the INCREDIBLE SURROUND con-  
trol to INCREDIBLE SURROUND to  
enhance stereo programs. Or set the  
INCREDIBLE SURROUND control to  
SPATIAL to give a “surround” effect  
to mono programs.  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TREBLE  
BASS  
BALANCE  
AVL  
INCR. SURROUND  
SOUND  
TREBLE  
BASS  
30  
BALANCE  
AVL  
INCR. SURROUND  
BEGIN  
SOUND  
Press the MENU button on the  
remote control to show the on-screen  
menu.  
TREBLE  
BASS  
BALANCE  
AVL  
INCR. SURROUND INCR. SURROUND  
OFF  
Press the CURSOR DOWN but-  
ton once to highlight SOUND.  
+
V  
i
SAP  
OR  
TV  
Press the CURSOR RIGHT but-  
ton to enter the SOUND menu.  
INCR. SURROUND STEREO  
VCR  
ACC  
1
4
2
5
8
0
3
6
Press the CURSOR DOWN but-  
ton repeatedly until INCR. SUR-  
ROUND is highlighted. Then press  
the CURSOR RIGHT or LEFT but-  
ton to select SPATIAL or MONO for  
a mono program, or INCR. SUR-  
ROUND or STEREO for a stereo pro-  
gram.  
9
7
SMART  
SMART  
MENU  
SURF  
3
CH  
INCR. SURROUND  
SPATIAL  
Press the i+ button to remove the  
menu from the screen.  
INCR. S
A/CH  
4
PIP CH  
OR  
OR  
UP  
DN  
STEREO  
MONO  
SMART HELP  
+
AV  
i
SAP  
TV  
VCR  
1
Press the INCR. SURR.  
button on the remote to toggle  
between the same Incredible  
Surround options discussed above:  
SPATIAL or MONO and INCR.  
SURROUND or STEREO. The  
options available to you will be  
determined by the program the TV  
is on when you push the INCR.  
SURR. button.  
2
5
8
0
3
6
ACC  
4
9
7
SMART  
SMART  
MENU  
SURF  
CH  
PIP  
INCR. SURR.  
A/CH  
PIP CH  
UP  
DN  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Menu • Stereo and SAP (Second Audio Program)  
SETTING THE TV FOR STEREO AND SAP  
STEREO MODE  
PICTURE  
SOUND  
TREBLE  
BASS  
ou can enjoy stereo programs on  
Yyour TV. It has both an amplifier  
and twin speakers through which  
stereo sound can be heard. Follow  
these steps to select the STEREO  
mode.  
FEATURES  
INSTALL  
BALANCE  
AVL  
INCR. SURROUND  
SOUND  
TREBLE  
BASS  
BALANCE  
AVL  
INCR. SURROUND  
30  
BEGIN  
SOUND  
BASS  
Press the MENU button on the  
remote control to show the on-screen  
menu.  
BALANCE  
AVL  
INCR. SURROUND  
STEREO  
MONO  
Press the CURSOR DOWN but-  
ton once to highlight the SOUND  
menu.  
+
i
SAP  
OR  
TV  
VCR  
1
2
5
8
0
3
6
STEREO  
STEREO  
ACC  
4
Press the CURSOR RIGHT but-  
ton to enter the SOUND menu.  
9
7
SMART  
SMART  
Press the CURSOR DOWN but-  
ton repeatedly until the STEREO  
control is highlighted.  
MENU  
SURF  
3
SMART HELP  
Press the CURSOR RIGHT or  
LEFT button to select STEREO or  
MONO. When STEREO has been  
selected, the television will reproduce  
any stereo signal it receives.  
If stereo is not present on  
a selected show and the TV is  
placed in the STEREO mode, the  
sound coming from the set will  
remain MONO.  
CH  
2
INCR.
A/CH  
4
Press the i+ button to remove the  
PIP CH  
menu from the screen.  
UP  
DN  
SECOND AUDIO PROGRAM (SAP)  
Second Audio Program, or SAP, is  
Aan additional part of the stereo  
broadcast system. Sent as a third audio  
channel, an SAP can be heard apart  
from the current TV program sound. TV  
stations are free to use SAP for any  
number of purposes, such as the broad-  
cast of a second language or other  
audio information.  
SOUND  
SOUND  
BALANCE  
AVL  
BALANCE  
AVL  
INCR. SURROUND  
STEREO  
SAP  
INCR. SURROUND  
STEREO  
SAP  
ON  
NOT AVAILABLE  
If an SAP signal is not present with a  
selected program, the SAP option can-  
not be selected; NOT AVAILABLE will  
appear on screen. Also, if SAP is select-  
ed on a channel and you change to  
another channel, when you return to the  
original channel, SAP will be off. You  
will have to reselect the SAP feature.  
IF A SECOND AUDIO PROGRAM  
IS BEING BROADCAST:  
IF A SECOND AUDIO PROGRAM  
IS NOT BEING BROADCAST:  
SAP  
ON  
SAP  
NOT AVAILABLE  
OR  
OR  
SAP  
OFF  
SAP  
OFF  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Menu • The Audio Out Control  
SETTING THE AUDIO OUT CONTROL  
f you have connected the TV’s  
IAUDIO OUTPUT jacks to the  
AUDIO INPUT jacks on a stereo  
receiver, set AUDIO OUT to either  
VARIABLE or FIXED to determine  
whether you adjust the volume at the  
at the TV or at the stereo. If you select  
VARIABLE, change the volume at the  
TV using the TV’s remote control. If  
you select FIXED, adjust the volume  
at the stereo using the stereo’s con-  
trols. Follow these steps to make  
your selection.  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TREBLE  
BASS  
BALANCE  
AVL  
INCR. SURROUND  
SOUND  
TREBLE  
BASS  
30  
BEGIN  
BALANCE  
AVL  
INCR. SURROUND  
Press the MENU button on the  
remote control to show the on-screen  
menu.  
SOUND  
Press the CURSOR DOWN but-  
ton once to highlight SOUND.  
AVL  
INCR. SURROUND  
STEREO  
SAP  
Press the CURSOR RIGHT but-  
AUDIO OUT  
FIXED  
6
ton to enter the SOUND menu.  
+
V  
i
SAP  
Press the CURSOR DOWN but-  
ton repeatedly until AUDIO OUT is  
highlighted.  
OR  
TV  
VCR  
ACC  
1
4
2
5
8
0
3
6
SOUND  
AVL  
Press the CURSOR RIGHT or  
LEFT button to set the AUDIO  
OUT to VARIABLE or FIXED.  
9
7
INCR. SURROUND  
STEREO  
SAP  
SMART  
SMART  
1
MENU  
SURF  
3
AUDIO OUT  
VARIABLE  
Press the i+ button to remove the  
menu from the screen.  
CH  
INCR. SURR
A/CH  
PIP CH  
UP  
DN  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Menu • The TV Speaker Control and Audio Outputs  
USING THE TV SPEAKER CONTROL AND AUDIO OUTPUTS  
ould you like to hear TV pro-  
Wgrams through your audio hi-  
fi system? The TV’s Audio Outputs  
and TV Speaker ON/OFF control  
work together to offer you this TV  
sound option.  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TREBLE  
BASS  
BALANCE  
AVL  
INCR. SURROUND  
SOUND  
TREBLE  
BASS  
30  
BEGIN  
BALANCE  
AVL  
INCR. SURROUND  
Use audio cables to connect  
the R(ight) and L(eft) AUDIO  
OUT(puts) on the TV to the  
AUX/TV INPUTs on your amplifier  
or sound system. Set the audio sys-  
tem’s volume to a normal listening  
level.  
SOUND  
INCR. SURROUND  
STEREO  
SAP  
AUDIO OUT  
SPEAKERS  
8
ON  
Turn the TV and audio system  
ON. You can now adjust the sound  
level coming from the audio system  
with the VOL(ume) (+,–) buttons on  
the TV or remote control.  
+
V  
i
SAP  
TV  
VCR  
1
2
5
8
0
3
6
OR  
ACC  
SPEAKERS  
OFF  
4
9
7
3
SMART  
SMART  
To hear the TV sound from only the  
audio system speakers:  
7
Back of TV  
MENU  
SURF  
5
ANTENN75Ω  
MONITOR OUT  
AV1 IN  
AV2 IN  
Press the MENU button on the  
remote control to show the on-  
screen menu.  
1
Y
IDEO  
Pb  
Pr  
S-VIDEO  
MONO/L  
AUDIO  
R
CH  
Press the CURSOR DOWN  
button once to highlight SOUND.  
4
6
PIP  
INCR. SURR.  
A/CH  
Press the CURSOR RIGHT  
button to enter the SOUND menu.  
PIP CH  
Press the CURSOR DOWN  
button repeatedly until the  
UP  
DN  
SPEAKERS control is highlighted.  
R
L
Press the CURSOR RIGHT or  
LEFT button to turn the televi-  
sion’s speakers ON or OFF. With  
the SPEAKERS control set to OFF,  
you should hear the TV sound com-  
ing only from the audio system  
speakers.  
AUX/TV INPUT  
PHONO INPUT  
Press the i+ button to remove  
the menu from the screen.  
2
Audio System  
SMART HELP  
The audio system may  
have to be in AUX(iliary)  
mode to play sound from the TV.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Menu • The Bass Boost Control  
USING THE BASS BOOST CONTROL  
he BASS BOOST control allows  
Tyou to increase the low-frequency  
range of the TV’s sound. This creates  
a deeper, fuller sound. Follow these  
steps to turn BASS BOOST ON.  
BEGIN  
Press MENU button on the  
remote control to show the on-screen  
menu.  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TREBLE  
BASS  
BALANCE  
AVL  
INCR. SURROUND  
SOUND  
TREBLE  
BASS  
30  
Press the CURSOR DOWN but-  
BALANCE  
AVL  
INCR. SURROUND  
ton once to highlight SOUND.  
Press the CURSOR RIGHT but-  
ton to enter the SOUND menu.  
SOUND  
Press the CURSOR DOWN but-  
ton repeatedly until BASS BOOST is  
highlighted.  
STEREO  
SAP  
AUDIO OUT  
SPEAKERS  
BASS BOOST  
ON  
Press the CURSOR RIGHT or  
LEFT button to turn BASS BOOST  
ON or OFF.  
6
+
V  
i
SAP  
OR  
TV  
VCR  
ACC  
BASS BOOST  
OFF  
1
4
2
5
8
0
3
6
Press the i+ button to remove the  
menu from the screen.  
9
7
SMART  
1
SMART  
MENU  
SURF  
3
CH  
2
INC
A/CH  
4
PIP CH  
UP  
DN  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control • SmartPicture  
USING SMARTPICTURE  
hether you’re watching a movie  
Wor playing a video game, your  
TV has automatic video control set-  
tings that will match with your current  
program source or content.  
SmartPicture quickly resets your TV’s  
video controls for a number of differ-  
ent types of programs and viewing  
conditions that you may have in your  
home. The Movies, Sports, Weak  
Signal, and Multimedia AutoPicture  
controls have been preset at the facto-  
ry to automatically adjust the TV’s  
brightness, color, picture, sharpness,  
tint, and color temperature levels. The  
Personal AutoPicture settings are the  
ones that you made through the PIC-  
TURE options within the on-screen  
menu.  
PERSONAL  
BRIGHTNESS  
COLOR  
PICTURE  
48  
41  
81  
46  
MOVIES  
SHARPNESS  
BRIGHTNESS  
COLOR  
PICTURE  
40  
31  
20  
16  
SHARPNESS  
SPORTS  
BEGIN  
BRIGHTNESS  
COLOR  
PICTURE  
SHARPNESS  
62  
31  
62  
16  
Press the SMARTPICTURE  
button on the remote control. The  
current AutoPicture setting will  
appear in the middle of the screen.  
+
AV  
i
SAP  
TV  
VCR  
1
2
5
8
0
3
6
WEAK SIGNAL  
Press the SMARTPICTURE  
button repeatedly to select either  
PERSONAL, MOVIES, SPORTS,  
WEAK SIGNAL, or MULTIMEDIA  
picture settings.  
ACC  
2
BRIGHTNESS  
COLOR  
PICTURE  
SHARPNESS  
37  
35  
15  
15  
4
1
9
7
SMART  
SMART  
MENU  
SURF  
MULTIMEDIA  
BRIGHTNESS  
COLOR  
PICTURE  
SHARPNESS  
40  
31  
20  
26  
CH  
SMART HELP  
You determine the PER-  
SONAL setting by adjustments  
you make within the PICTURE  
menu. The other SmartPicture set-  
tings are made at the factory and  
cannot be adjusted.  
PIP  
INCR. SURR.  
A/CH  
PIP CH  
UP  
DN  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control • SmartSound  
USING SMARTSOUND  
martSound allows you to select  
Sfrom three factory-set controls and  
a personal control that you set  
according to your own preferences  
through the on-screen Sound menu.  
The three factory-set controls (Voice,  
Music, and Theatre) enable you to  
tailor the TV sound so as to enhance  
the particular program you are  
watching. Follow these steps to select  
any of the options.  
PERSONAL  
TREBLE  
BASS  
49  
49  
VOICE  
TREBLE  
BASS  
56  
47  
BEGIN  
Press the SMARTSOUND but-  
ton on the remote control. The cur-  
rent SmartSound setting will appear  
in the middle of the screen.  
MUSIC  
TREBLE  
BASS  
63  
69  
Press the SMARTSOUND but-  
ton repeatedly to cycle through the  
four settings: PERSONAL, VOICE,  
MUSIC, or THEATRE.  
+
AV  
i
SAP  
TV  
VCR  
1
2
5
8
0
3
6
ACC  
THEATRE  
2
4
TREBLE  
BASS  
60  
72  
1
9
7
SMART  
SMART  
SMART HELP  
MENU  
SURF  
You determine the PER-  
SONAL setting by adjust-  
ments you make within the SOUND  
menu. The other SmartSound set-  
tings are made at the factory and  
cannot be adjusted.  
CH  
SmartSoundworks only with the  
programs coming through the  
PIP  
INCR. SURR.  
A/CH  
ANTENNA/CABLE (ANT “A” or  
PIP ANT “B”) inputs on the back of  
the TV. SmartSound will not control  
the sound levels of the other inputs  
on the back of the TV set.  
PIP CH  
UP  
DN  
SmartSound Choices  
PERSONAL—presents the TV’s  
sound according to the settings you  
make within the SOUND menu.  
VOICE—brings voices to the fore-  
front and emphasizes them. Moves  
music to the background.  
MUSIC—emphasizes music over  
voices.  
THEATRE—provides a balance  
between voices and music.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control • Surf and Alternate Channel  
USING SURF AND ALTERNATE CHANNEL  
SURF  
SURF  
12  
ADD?  
list of previously viewed channels  
Acan be selected with the SURF  
button on your remote control. With  
SURF, you can easily switch between  
different TV channels that currently  
interest you. The SURF control allows  
you to set up to ten channels in its  
quick viewing list.  
SURF  
12  
SMART  
HELP  
DELETE?  
SURF LIST EMPTY  
Along with the  
broadcast channels, the  
external video source  
connections can be  
added to the SURF list.  
This means that the  
AV 1, CVI, and AV 2  
signal sources can be  
added to your SURF  
list. Just press the AV  
button on your remote  
to select the signal  
SURF  
12  
BEGIN  
24  
ADD?  
Press the CH(annel) Scan (+,–)  
buttons (or the NUMBER buttons) to  
select a channel to add to the SURF  
list.  
+
AV  
i
SAP  
TV  
VCR  
1
2
5
8
0
3
SURF  
ACC  
4
6
12  
24  
DELETE?  
7
9
SMART  
2
SMART  
Press the SURF button on the  
remote control. The on-screen display  
may read, “SURF LIST EMPTY.”  
The number of the current channel  
will be shown with ADD? to the right.  
MENU  
SURF  
source and then follow  
steps 2Ð4 in the ÒSurfÓ  
section on this page.  
SURF  
CH  
While the SURF list message or  
the SURF channel list appears on the  
screen, press the CURSOR RIGHT  
button to add the present channel to  
the SURF list.  
12  
24  
32  
ADD?  
PIP  
INCR. SURR.  
A/CH  
SURF  
12  
24  
32  
PIP CH  
UP  
DN  
If you want to delete the present  
channel from the SURF list, press the  
CURSOR RIGHT button again.  
DELETE?  
Repeat steps 1 through 3 to add more  
channels (up to 10) to the SURF list.  
MENU  
SURF  
ALTERNATE CHANNEL (A/CH)  
5
our remote also has an A/CH  
Y(Alternate Channel) button.  
Pressing this button will toggle  
between the current channel and one  
previous channel.  
10  
CH  
PIP  
INCR. SURR.  
A/CH  
PIP CH  
UP  
DN  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control • The Sleep Timer Control  
USING THE SLEEP TIMER CONTROL  
ave you ever fallen asleep in  
Hfront of the TV, only to be awak-  
ened in the middle of the night by the  
screeching sound that accompanies  
the on-screen test pattern of a station  
that’s signed off? Your TV can enable  
you to avoid that discomfort by auto-  
matically turning itself off. You choose  
the amount of time before the set turns  
off.  
SLEEP OFF  
SLEEP 15  
SLEEP 30  
BEGIN  
Press the SLEEP button on the  
remote control. The SLEEP Timer on-  
screen display will appear in the  
upper part of the screen.  
2
1
Within five seconds, press the  
SLEEP button repeatedly to pick the  
amount of time before the TV will  
turn itself off.  
+
AV  
i
SAP  
TV  
VCR  
1
2
5
8
0
3
6
ACC  
SLEEP 45  
4
An on-screen countdown will appear  
during the last minute before the TV  
turns off.  
9
7
SMART  
SMART  
MENU  
SURF  
SLEEP 60  
CH  
SMART HELP  
To see how many minutes  
remain before the TV shuts  
PIP  
INCR. SURR.  
A/CH  
SLEEP 90  
itself off, press the i+ button.  
PIP CH  
UP  
DN  
SLEEP 120  
During the last minute of a  
Sleep Timer setting, an on-  
screen countdown will be  
displayed.  
During the last 10 seconds  
of a Sleep Timer setting, the  
on-screen display will read  
“GOOD BYE.”  
SLEEP 180  
SLEEP 240  
50 SEC  
GOOD BYE  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control • The Volume and AV Buttons  
USING THE VOLUME AND AV BUTTONS  
VOLUME BUTTONS  
ress the VOLUME (+, –) buttons  
Pon the remote and the volume  
adjustment bar will appear on screen.  
Adjustments are shown as you make  
them.  
VOLUME  
15  
BEGIN  
Press the VOLUME (+,–) but-  
tons on the remote control to show  
the VOLUME bar display on the  
screen.  
AV 2  
CV1  
AV 1  
Press the VOLUME (+,–) but-  
tons to adjust the TV’s sound level.  
+
AV  
i
SAP  
TV  
VCR  
1
2
5
8
0
3
ACC  
4
6
9
7
SMART  
SMART  
AV BUTTON  
MENU  
SURF  
he AV button on your remote con-  
Ttrol allows you to choose from  
among the signal sources you have  
connected to your TV.  
10  
2
1
CH  
BEGIN  
Press the AV button on your  
remote to choose a signal source for  
viewing.  
PIP  
INCR. SURR.  
A/CH  
PIP CH  
UP  
DN  
1
+
AV  
i
SAP  
TV  
VCR  
1
2
5
8
0
3
6
ACC  
4
9
7
SMART  
SMART  
MENU  
SURF  
CH  
PIP  
INCR. SURR.  
A/CH  
PIP CH  
UP  
DN  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control • Working Accessory Devices  
SETTING THE TV REMOTE TO WORK ACCESSORY DEVICES  
our TV remote is capable of work-  
Ying not only your TV but also  
infrared remote (IR) controlled  
devices such as VCRs, cable TV con-  
verter boxes, satellite receivers, DVD  
players, and laser disc players.  
If you want to use your TV remote to  
operate a VCR or other accessory  
device, you will need to perform this  
initial check explained in this sec-  
tion. You may also need to go to the  
sections on the “Direct Access  
Method” and the “Search Method”  
in the pages that follow.  
BEGIN  
VCR  
Satellite  
Move the slide switch on the side  
of the TV remote to VCR or ACC  
mode for the accessory device catego-  
ry you want.  
2
Receiver  
SAP  
+
i
AV  
NOTE: selecting the ACC(essory)  
mode button allows access to the  
product codes for cable TV convert-  
ers, DVD players, satellite receivers,  
and laser disc players.  
TV  
Cable Converter  
T
SMAR  
VCR  
ACC  
SURF  
T
SMAR  
MENU  
CH  
A/CH  
PIP  
INCR. SURR.  
DN  
PIP CH  
UP  
Point the TV remote toward the  
desired accessory device and press the  
POWER button.  
1
+
AV  
i
SAP  
Does the remote turn the accessory  
device on?  
TV  
VCR  
1
2
3
6
ACC  
4
5
8
0
If yes,  
and try other function but-  
9
7
tons on the TV remote. If they also  
work the accessory device, then the  
remote is ready and no further steps  
are needed.  
SMART  
SMART  
TV Remote VCR/ACC(essory)  
Mode Buttons  
If no, do the following:  
Look up a three-digit remote code  
number on page 45 or 46 for your  
brand of accessory device. Then go  
through the simple Direct Access  
Method steps shown on page 43.  
SMART HELP  
If more than one number is  
listed, you may have to try  
more than the first three-digit code  
given to locate your device’s correct  
code.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control • Working Accessory Devices  
SETTING THE TV REMOTE TO WORK ACCESSORY DEVICES  
DIRECT ACCESS METHOD  
ow that you have looked up the  
Nthree-digit Remote Control Direct  
Entry Code for your brand of acces-  
sory device, you are ready to follow  
the simple steps shown below.  
Satellite  
Receiver  
1
+
AV  
i
SAP  
TV  
VCR  
1
2
5
8
0
3
6
Cable TV  
Converter  
ACC  
Please read through all the steps  
before beginning.  
4
4
9
7
DVD  
VCR  
BEGIN  
SMART  
SMART  
Move the slide switch on the side  
of the TV remote to VCR or ACC  
mode for the device you want.  
MENU  
SURF  
Press the VCR RECORD (•)  
button and release.  
5
CH  
Within 30 seconds, press the  
SMARTSOUND button.  
A
V
Within 30 seconds, Enter the  
three-digit ID code (the code is list  
on pages 45 and 46).  
TV  
i+  
SAP  
VCR  
PIP  
INCR. SURR.  
A/CH  
ACC  
SMAR  
T
SMAR  
T
ME  
N
U
S
U
R
F
Point the remote at the accessory  
device. Then press the POWER but-  
ton on the TV remote to turn the  
device on.  
PIP CH  
UP  
DN  
C
H
INCR. SURR.  
PIP  
A/C  
H
PIP  
C
H
UP  
DN  
SMART HELP  
• ACC mode is for cable  
converter boxes, satellite  
receivers, DVDs, and laser disc  
players.  
• If the procedure explained above  
does not work the first time,  
repeat the steps using the same  
remote code number.  
• If after a second try the TV  
remote does not operate your  
accessory device, and more code  
numbers are listed for your brand,  
use the next listed code number.  
Continue trying the code numbers  
until successful.  
• If none of the codes listed for the  
accessory device will work, go to  
the Search Method on the next  
page.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control • Working Accessory Devices  
SETTING THE TV REMOTE TO WORK ACCESSORY DEVICES  
SEARCH METHOD  
our TV remote can be set to work  
Yvarious accessory devices (VCRs,  
cable converters, satellite receivers)  
by what is called the Search Method.  
NOTE: The Search Method works  
with devices equipped with Channel  
Display Indicators (cable TV convert-  
ers, satellite receivers, etc.). For  
Satellite Receiver  
06  
0708  
Cable TV Converter  
06  
0708  
09  
1
09  
Play  
VCR  
Stop  
VCRs, the play/stop function is used  
to confirm that the correct code has  
been found. Please read the steps  
below once before performing them.  
5
BEGIN  
Turn on the desired device. For a  
VCR, insert a tape and begin playing.  
+
AV  
i
SAP  
2
Move the slide switch on the side  
of the TV remote to VCR or ACC  
mode for the desired device.  
TV  
VCR  
1
2
3
6
5
ACC  
4
5
8
0
4
3
9
7
Press and hold the VCR  
RECORD (•) and SMARTSOUND  
buttons at the same time.  
SMART  
SMART  
MENU  
SURF  
While continuing to hold the  
VCR RECORD (•) and SMART-  
SOUND buttons, point the TV  
remote at the remote sensor window  
of the accessory device. The TV  
remote will begin transmitting codes  
to try to find the one for your accesso-  
ry device.  
5
4
CH  
3
PIP  
INCR. SURR.  
A/CH  
PIP CH  
For cable converter boxes and  
satellite receivers, watch the acces-  
sory device’s Channel Indicator.  
When the channel numbers begin to  
change, immediately release the VCR  
RECORD (•) and SMARTSOUND  
buttons. The TV remote has identified  
the correct remote code for the acces-  
sory device. For VCRs, when the  
VCR player stops, the correct code  
has been found. When you release  
the VCR RECORD and SMART-  
SOUND buttons, the remote code for  
the accessory device will be stored in  
the TV remote. Whenever you want to  
use the TV remote to work the acces-  
sory device, remember to have the  
slide switch on the TV remote in the  
VCR or ACC mode. Then point the  
TV remote at the accessory device to  
operate it.  
UP  
DN  
SMART HELP  
Your TV remote may  
locate the accessory device’s  
code quickly or require several  
minutes to do so.  
• Don’t let the accessory device scan  
through more than five channels  
when the correct code is found—  
the remote may pass up the right  
code and have to repeat the search  
cycle.  
• If the channel does not change on  
the accessory device or if the VCR  
fails to stop, repeat steps 1–4. If  
there is still no response, the  
remote will not work the accessory  
device or VCR.  
•
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control • Working Accessory Devices  
SETTING THE TV REMOTE TO WORK ACCESSORIES  
Remote Control Direct Entry Codes  
MGN Technology . . . . . . . . . . . . . . . . . . . . .267 Shintom . . . . . . . . . . . . . . . . . . . . . . . . . . . .099  
MTC . . . . . . . . . . . . . . . . . . . . . . . . . . .027, 267 Shogun . . . . . . . . . . . . . . . . . . . . . . . . .078, 267  
Magnasonic . . . . . . . . . . . . . . . . . . . . . . . . . .305 Singer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .099  
Magnavox . . . .062, 108, 137, 130, 027, 066, 176 Sony . . . . . . . .060, 061, 059, 280, 027, 038, 062  
Magnin . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267 Sunpak . . . . . . . . . . . . . . . . . . . . . . . . . . . . .280  
Marantz . . . . . . . . . . . . . . . . . . . . . . . . .108, 062 Sylvania . . . . . . . . .062, 108, 027, 070, 130, 137  
Marta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .064 Symphonic . . . . . . . . . . . . . . . . . . . . . . . . . .027  
Matsushita . . . . . . . . . . . . . . . . . . .062, 189, 481 TMK . . . . . . . . . . . . . . . . . . . . . . .063, 235, 267  
Memorex .131, 074, 506, 027, 064, 075, 062, 073, Tatung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .068  
. . . . . . . .267, 334, 066, 189, 236, 481, 828, 829 Teac . . . . . . . . . . . . . . . . . . . . . . . . . . .027, 068  
Minolta . . . . . . . . . . . . . . . . . . . . . . . . .132, 069 Technics . . . . . . . . . . . . . . . . . . . .062, 189, 273  
Mitsubishi . . .070, 200, 088, 102, 241, 269, 075, Teknika . . . . . . . . . . . . . . . . .027, 062, 064, 079  
VCR BRAND AND REMOTE CODE(S)  
Admiral . . . . . . . . . . . . . . . . . . . . . . . . .075, 236  
Adventura . . . . . . . . . . . . . . . . . . . . . . . . . . .027  
Aiko . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .305  
Aiwa . . . . . . . . . . . . . . . . . . .334, 495, 027, 064  
Akai . . . . . . . .133, 080, 068, 076, 088, 183, 269  
America Action . . . . . . . . . . . . . . . . . . . . . . .305  
American High . . . . . . . . . . . . . . . . . . . . . . .062  
Asha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267  
Audiovox . . . . . . . . . . . . . . . . . . . . . . . . . . .064  
Beaumark . . . . . . . . . . . . . . . . . . . . . . . . . . .267  
Bell & Howell . . . . . . . . . . . . . . . . . . . . . . . .131  
Broksonic . . . . . . . . . . . . . . .148, 211, 029, 236,  
. . . . . . . . . . . . . . . . . . . . . . .238, 322, 388, 506  
CCE . . . . . . . . . . . . . . . . . . . . . . . . . . .099, 305  
Calix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .064  
Canon . . . . . . . . . . . . . . . . . . . . . .194, 062, 129  
Capehart . . . . . . . . . . . . . . . . . . . . . . . . . . . .047  
Carver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108  
Cineral . . . . . . . . . . . . . . . . . . . . . . . . . . . . .305  
Citizen . . . . . . . . . . . . . . . . . . . . . . . . .305, 064  
Colt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .099  
Craig . . . . . . . . . . . . . . .064, 099, 074, 267, 298  
Curtis Mathes . . . . . . . . . . . .062, 068, 087, 189  
Cybernex . . . . . . . . . . . . . . . . . . . . . . . .078, 267  
Daewoo . . . . . . . . . . . . . . . . .305, 588, 047, 072  
Daytron . . . . . . . . . . . . . . . . . . . . . . . . . . . . .047  
Denon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .069  
Dynatech . . . . . . . . . . . . . . . . . . . . . . . . . . . .027  
Electrohome . . . . . . . . . . . . . . . . . . . . . . . . .064  
Electrophonic . . . . . . . . . . . . . . . . . . . . . . . .064  
Emerex . . . . . . . . . . . . . . . . . . . . . . . . . . . . .059  
Emerson . . . . .211, 029, 236, 305, 063, 148, 238,  
. . . . . . . . . . .588, 235, 321, 506, 088, 115, 239,  
. . . . . . . . . . . .027, 064, 070, 095, 322, 388, 537  
Fisher . . . . . . . . . . . . . . . . . .074, 131, 081, 093  
Fuji . . . . . . . . . . . . . . . . . . . . . . . . . . . .060, 062  
Funai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .027  
GE . . . . . . . . . . . . .062, 087, 075, 092, 229, 267  
Garrard . . . . . . . . . . . . . . . . . . . . . . . . . . . . .027  
Go Video . . . . . . . . . . . . . . . .306, 459, 553, 259  
GoldStar . . . . . . . . . . . . .064, 045, 065, 498, 507  
Gradiente . . . . . . . . . . . . . . . . . . . .035, 027, 435  
Grundig . . . . . . . . . . . . . . . . . . . . . . . . . . . .222  
HI-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .074  
Harley Davidson . . . . . . . . . . . . . . . . . . . . . .027  
Harman/Kardon . . . . . . . . . . . . . . .065, 102, 108  
Harwood . . . . . . . . . . . . . . . . . . . . . . . .095, 099  
Headquarter . . . . . . . . . . . . . . . . . . . . . . . . .073  
Hitachi . . . . . .069, 193, 132, 092, 027, 068, 109  
Hughes Network Systems . . . . . . . . . . . . . . .069  
JVC . . . . . . . . . . . .094, 035, 233, 234, 068, 411  
Jensen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .068  
KEC . . . . . . . . . . . . . . . . . . . . . . . . . . .064, 305  
KLH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .099  
Kenwood . . . . . . . . . . . . . . . .068, 094, 411, 065  
Kodak . . . . . . . . . . . . . . . . . . . . . . . . . .062, 064  
LXI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .064  
Lloyd's . . . . . . . . . . . . . . . . . . . . . . . . .027, 235  
Logik . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .099  
MEI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .062  
MGA . . . . . . . . . . . . . . . . . . . . . . .070, 088, 267  
094, 470  
Thomas . . . . . . . . . . . . . . . . . . . . . . . . . . . . .027  
Motorola . . . . . . . . . . . . . . . . . . . . . . . .062, 075 Toshiba . . . . . . . . . .072, 237, 239, 070, 093, 393  
Multitech . . . . . . . . . . . . . . . . . . . . . . . .027, 099 Totevision . . . . . . . . . . . . . . . . . . . . . . .064, 267  
NAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .085 Unitech . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267  
NEC . . . . . . . .065, 067, 068, 077, 094, 109, 131 Vector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .072  
Nikko . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .064 Vector Research . . . . . . . . . . . . . . . . . .065, 067  
Nikon . . . . . . . . . . . . . . . . . . . . . . . . . .061, 280 Video Concepts . . . . . . . . . . .067, 072, 088, 248  
Noblex . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267 Videosonic . . . . . . . . . . . . . . . . . . . . . . . . . .267  
Olympus . . . . . . . . . . . . . . . . . . . . . . . .062, 253 Wards . . . . . . . . . .062, 087, 089, 027, 074, 239,  
Optimus . . . . . . . . . . . .189, 481, 075, 085, 064,  
. . . . . . . . . . . . . . . .267, 069, 075, 099, 108, 176  
. . . . . . . . . . . . . . . . . . .131, 459, 827, 828, 829 White Westinghouse . . . . . . . . . . .099, 305, 236  
Optonica . . . . . . . . . . . . . . . . . . . . . . . . . . . .089 XR-1000 . . . . . . . . . . . . . . . . . . . .099, 027, 062  
Orion . . . . . . . . . . . . . . .506, 029, 211, 236, 322 Yamaha . . . . . . . . . . . . . . . . . . . . . . . . . . . . .065  
Panasonic . . . . . . .062, 189, 481, 253, 104, 405,  
. . . . . . . . . . . .129, 252, 254, 273, 827, 828, 829  
Penney . . . . . .062, 267, 064, 069, 065, 067, 081  
Pentax . . . . . . . . . . . . . . . . . . . . . .069, 092, 132  
Philco . . . . . . . . . . . . . . . . . . . . . .062, 236, 506  
Philips . . . . . . . . . .108, 062, 089, 137, 830, 831  
Pilot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .064  
Pioneer . . . . . . . . . . . . . . . . . . . . .085, 195, 094  
Polk Audio . . . . . . . . . . . . . . . . . . . . . . . . . .108  
Portland . . . . . . . . . . . . . . . . . . . . . . . . . . . .047  
Profitronic . . . . . . . . . . . . . . . . . . . . . . . . . . .267  
Proscan . . . . . . . . . . . . . . . . . . . . . . . . .087, 229  
Protec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .099  
Pulsar . . . . . . . . . . . . . . . . . . . . . . . . . .066, 078  
Quarter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .073  
Quartz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .073  
Quasar . . . . . . . . . . . . . .062, 189, 104, 481, 828  
RCA . . . . . . . . . . .087, 176, 229, 069, 132, 062,  
. . . . . . . . . . . . . . . .075, 092,104, 133, 267, 304  
Radio Shack . . . . . . . . . . . . . . . . . . . . . . . . .027  
Radix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .064  
Randex . . . . . . . . . . . . . . . . . . . . . . . . . . . . .064  
Realistic . . . . . . . . . . . . . . . .027, 131, 074, 075,  
. . . . . . . . . . . . . . . . . . . .064, 062, 089, 073, 93  
Ricoh . . . . . . . . . . . . . . . . . . . . . . . . . .061, 280  
Runco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .066  
STS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .069  
Salora . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102  
Samsung . . . . . . . . . . . . . . . .072, 078, 080, 267  
Sanky . . . . . . . . . . . . . . . . . . . . . . . . . .066, 075  
Sansui . . . . . . .068, 506, 027, 094, 109, 236, 298  
Sanyo . . . . . . . . . . . . . . . . . .074, 073, 131, 267  
Scott . . . . . . . .211, 238, 148, 070, 072, 237, 239  
Sears . . . . . . . . . . . . . . .081, 132, 064, 069, 027,  
. . . . . . . . . . . . . . . . . . .062, 073, 074, 093, 131  
Semp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .072  
Sharp . . . . . . . . . . . . . . . . . . . . . . . . . . .075, 089  
Zenith . . . . . . . . . . .066, 027, 060, 061, 236, 506  
CABLE CONVERTER BRAND AND  
REMOTE CODE(S)  
ABC . . . . . . . . . . . . . . . . . . .030, 028, 034, 035,  
. . . . . . . . . . . . . . . . . . .038, 040, 041, 044, 060  
Allegro . . . . . . . . . . . . . . . . . . . . . . . . .180, 342  
Antronix . . . . . . . . . . . . . . . . . . . . . . . .049, 234  
Archer . . . . . . . . . . . . . .049, 066, 180, 234, 824  
BBT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .294  
Belcor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .083  
Bell & Howell . . . . . . . . . . . . . . . . . . . . . . . .041  
Cable Star . . . . . . . . . . . . . . . . . . . . . . . . . . .083  
Cabletenna . . . . . . . . . . . . . . . . . . . . . . . . . .049  
Cableview . . . . . . . . . . . . . . . . . . . . . . . . . . .049  
Century . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180  
Citizen . . . . . . . . . . . . . . . . . . . . . . . . .180, 342  
Colour Voice . . . . . . . . . . . . . . . . . . . . .052, 058  
Comband . . . . . . . . . . . . . . . . . . . . . . . . . . .259  
Comtronics . . . . . . . . . . . . . . . . . . . . . .067, 087  
Contec . . . . . . . . . . . . . . . . . . . . . . . . . . . . .046  
Digi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .664  
Eastern . . . . . . . . . . . . . . . . . . . . . . . . . . . . .029  
Emerson . . . . . . . . . . . . . . . . . . . . . . . . . . . .824  
Everquest . . . . . . . . . . . . . . . . . . . . . . .042, 067  
Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .427  
GC Electronics . . . . . . . . . . . . . . . . . . .083, 234  
GE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .259  
Garrard . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180  
Gemini . . . . . . . . . . . . . . . . .042, 097, 269, 824  
General Instrument . . . . . . . .303, 503, 038, 837  
GoldStar . . . . . . . . . . . . . . . . . . . . . . . .067, 171  
Goodmind . . . . . . . . . . . . . . . . . . . . . . . . . .824  
Hamlin . . . . . . . . . . . . .047, 036, 286, 061, 300  
Hitachi . . . . . . . . . . . . . . . . . . . . . . . . . . . . .038  
Hytex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .034  
Jasco . . . . . . . . . . . . . . . . . . . . . . .042, 180, 342  
See the next page for more codes.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control • Working Accessory Devices  
SETTING THE TV REMOTE TO WORK ACCESSORY DEVICES  
Remote Control Direct Entry Codes  
Amway . . . . . . . . . . . . . . . . . . . . . . . . . 070, 102  
Mitsubishi . . . . . . . . . . . . . . . . . . . . . . . . . .861  
Onkyo . . . . . . . . . . . . . . . . . . . . . . . . . . . . .860  
Optimus . . . . . . . . . . . . . . . . . . . . . . . . . . . .869  
Panasonic . . . . . . . . . . . . . . . . . . . . . . . . . . .859  
Philips . . . . . . . . . . . . . . . . . . . . . . . . .866, 860  
Pioneer . . . . . . . . . . . . . . . . . . . . . . . . .869, 863  
Proscan . . . . . . . . . . . . . . . . . . . . . . . . . . . . .862  
RCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .862  
Samsung . . . . . . . . . . . . . . . . . . . . . . . . . . . .870  
Sony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .864  
Technics . . . . . . . . . . . . . . . . . . . . . . . . . . . .859  
Theta Digital . . . . . . . . . . . . . . . . . . . . . . . .869  
Toshiba . . . . . . . . . . . . . . . . . . . . . . . . . . . . .860  
Yamaha . . . . . . . . . . . . . . . . . . . . . . . . .859, 867  
Zenith . . . . . . . . . . . . . . . . . . . . . . . . . .872, 860  
CABLE CONVERTER BRAND AND  
REMOTE CODE(S)  
Arunta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 548  
Astro Industries . . . . . . . . . . . . . . . . . . . . . . 122  
BMC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114  
BSR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122  
Cable Innovations. . . . . . . . . . . . . . . . . . . . . 581  
Capetronic . . . . . . . . . . . . . . . . . . . . . . . . . . 122  
Century. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 565  
Channel Master. . . . . . . . . . . . . . . . . . . 045, 239  
Chaparral . . . . . . . . . . . . . . . . . . . 080, 236, 243  
Citoh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191  
Conifer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 031  
Curtis Mathes . . . . . . . . . . . . . . . . . . . . 088, 099  
DX Antenna . . . . . . . . . . . . . . . . . . . . . . . . . 068  
Drake . . . . . . . . . . . . . . . . . . 091, 272, 045, 176  
Echostar. . . . . . . . . . . . . 307, 802, 175, 186, 296  
Expressvu. . . . . . . . . . . . . . . . . . . . . . . . . . . 802  
General Instrument . . . . 388, 896, 574, 581, 654  
Gould . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 082  
HNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 644  
HTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 802  
Hitachi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 846  
Homecable . . . . . . . . . . . . . . . . . . . . . . . . . . 265  
Hughes Network Systems . . . . . . . . . . . . . . . 776  
Hytek . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122  
IQ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237  
IQ Prism. . . . . . . . . . . . . . . . . . . . . . . . . . . . 237  
Intersat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 070  
JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 802  
Janeil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179  
Jerrold. . . . . . . . . . . . . . . . . . . . . . . . . . 388, 654  
Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296  
Macom . . . . . . . . . . . . . . . . . . . . . . . . . 088, 045  
Magnavox. . . . . . . . . . . . . . . . . . . . . . . 749, 751  
Memorex . . . . . . . . . . . . . . . . . . . . . . . 296, 751  
Next Level . . . . . . . . . . . . . . . . . . . . . . . . . . 896  
Norsat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 031  
Panasonic . . . . . . . . . . . . . . . . . . . . . . . 179, 728  
Philips. . . . . . . . . . . . . . . . . . . . . . 227, 749, 751  
Pico . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102  
Primestar. . . . . . . . . . . . . . . . . . . . . . . . 654, 388  
RCA . . . . . . . . . . . . . . . . . . . . . . . 593, 170, 882  
Radio Shack . . . . . . . . . . . . . . . . . . . . . 581, 896  
Ramsey. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102  
Realistic . . . . . . . . . . . . . . . . . . . . . . . . 079, 078  
STS. . . . . . . . . . . . . . . . . . . . . . . . . . . . 237, 068  
Sony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 666  
Star Choice. . . . . . . . . . . . . . . . . . . . . . . . . . 896  
Star Trak . . . . . . . . . . . . . . . . . . . . 207, 448, 574  
Strong. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 448  
Toshiba . . . . . . . . . . . . . . . . . 109, 776, 817, 088  
Town & Country. . . . . . . . . . . . . . . . . . . . . . 574  
Uniden . . . . . . . . . . . . . . . . . 265, 079, 101, 397,  
. . . . . . . . . . . . . . . . . . . 581, 751, 103, 323, 749  
Zenith . . . . . . . . . . . . . . . . . . . . . . 091, 883, 088  
Jerrold . . . . . . . . . . . . . . . . .030, 039, 303, 041,  
. . . . . . . . . . . . . . . . . . .503, 038, 051, 042, 837  
Linsay . . . . . . . . . . . . . . . . . . . . . . . . . . . . .467  
Macom . . . . . . . . . . . . . . . . . . . . . . . . . . . . .060  
Magnavox . . . . . . . . . . . . . . . . . . . . . . . . . .054  
Memorex . . . . . . . . . . . . . . . . . . . . . . . . . . .027  
Movie Time . . . . . . . . . . . . . . . . . . . . .090, 183  
NSC . . . . . . . . . . . . . . . . . . . . . . .183, 090, 097  
Novaplex . . . . . . . . . . . . . . . . . . . . . . . . . . .645  
Oak . . . . . . . . . . . . . . . . . . . . . . . . . . . .046, 034  
Optimus . . . . . . . . . . . . . . . . . . . . . . . . . . . .048  
Panasonic . . . . . . . . . . . . . . . . . . .048, 134, 027  
Panther . . . . . . . . . . . . . . . . . . . . . . . . . . . . .664  
Paragon . . . . . . . . . . . . . . . . . . . . . . . . . . . .027  
Philips . . . . . . . . . .052, 058, 269, 317, 054, 180  
Pioneer . . . . . . . . . . . . . . . . . . . . .171, 050, 560  
Popular Mechanics . . . . . . . . . . . . . . . . . . . .427  
Prelude . . . . . . . . . . . . . . . . . . . . . . . . . . . . .797  
Pulsar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .027  
Quasar . . . . . . . . . . . . . . . . . . . . . . . . . . . . .027  
RCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .048  
Radio Shack . . . . . . . . . . . . .042, 847, 342, 824  
Realistic . . . . . . . . . . . . . . . . . . . . . . . . . . . .234  
Recoton . . . . . . . . . . . . . . . . . . . . . . . . . . . .427  
Regal . . . . . . . . . . . . . . . . . . . . . .300, 047, 286  
Regency . . . . . . . . . . . . . . . . . . . . . . . . . . . .029  
Rembrandt . . . . . . . . . . . . . . . . . . . . . .038, 097  
Runco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .027  
SL Marx . . . . . . . . . . . . . . . . . . . . . . . . . . . .067  
Samsung . . . . . . . . . . . . . . . . . . . . . . . .067, 171  
Scientific Atlanta . . . . . . . . . .035, 044, 033, 504  
Seam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .537  
Signal . . . . . . . . . . . . . . . . . . . . . . . . . .042, 067  
Signature . . . . . . . . . . . . . . . . . . . . . . . . . . .038  
Sprucer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .048  
StarSight . . . . . . . . . . . . . . . . . . . . . . . .569, 449  
Starcom . . . . . . . . . . . . . . . . . . . . . . . .030, 042  
Stargate . . . . . . . . . . . . . . . . .067, 042, 797, 824  
Starquest . . . . . . . . . . . . . . . . . . . . . . . . . . .042  
Sylvania . . . . . . . . . . . . . . . . . . . . . . . . . . . .028  
TFC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .337  
TV86 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .090  
Tandy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .285  
TeleCaption . . . . . . . . . . . . . . . . . . . . . . . . .248  
Teleview . . . . . . . . . . . . . . . . . . . . . . . . . . . .067  
Texscan . . . . . . . . . . . . . . . . . . . . . . . . . . . .028  
Timeless . . . . . . . . . . . . . . . . . . . . . . . . . . . .445  
Tocom . . . . . . . . . . . . . . . . . . . . . . . . .039, 040  
Toshiba . . . . . . . . . . . . . . . . . . . . . . . . . . . . .027  
Tusa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .042  
Unika . . . . . . . . . . . . . . . . . . . . . .180, 234, 049  
United Artists . . . . . . . . . . . . . . . . . . . . . . . .034  
Universal . . . . . . . .234, 049, 066, 083, 180, 218  
Viewstar . . . . . . . . . . . . . . . .285, 054, 087, 090  
Zenith . . . . . . . . . . . . . . . . . . . . . .027, 552, 081  
Zentek . . . . . . . . . . . . . . . . . . . . . . . . . . . . .427  
LASER DISC BRAND AND REMOTE  
CODE(S)  
ADS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .880  
Aiwa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .855  
Carver . . . . . . . . . . . . . . . . . . . . . .853, 850, 858  
Denon . . . . . . . . . . . . . . . . . . . . . .851, 875, 849  
Disco Vision . . . . . . . . . . . . . . . . . . . . . . . . .848  
Funai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .855  
Harman/Kardon . . . . . . . . . . . . . . . . . . . . . .853  
Hitachi . . . . . . . . . . . . . . . . . . . . . . . . . . . . 848  
Kenwood . . . . . . . . . . . . . . . . . . . . . . . . . . .877  
Magnavox . . . . . . . . . . . . . . . . . . .853, 857, 875  
Marantz . . . . . . . . . . . . . . . . . . . . . . . .853, 850  
Mitsubishi . . . . . . . . . . . . . . . . . . . . . . . . . . 849  
NAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .849  
NEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .879  
Nikkodo . . . . . . . . . . . . . . . . . . . . . . . . . . . .884  
Optimus . . . . . . . . . . . . . . . . . . . . . . . . . . . .849  
Panasonic . . . . . . . . . . . . . . . . . . . . . . . . . . .856  
Philips . . . . . . . . . . . . . . . . . . . . . . . . .853, 850  
Pioneer . . . . . . . . . . . . . . . . . . . . . . . . .849, 848  
Polk Audio . . . . . . . . . . . . . . . . . . . . . . . . . .853  
Quasar . . . . . . . . . . . . . . . . . . . . . . . . . . . . .856  
RCA . . . . . . . . . . . . . . . . . . . . . . . . . . .881, 874  
Realistic . . . . . . . . . . . . . . . . . . . . . . . . . . . .855  
Samsung . . . . . . . . . . . . . . . . . . . . . . . . . . . .858  
Sega . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 848  
Sharp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .873  
Sony . . . . . . . . . . . . . . . . . . . . . . .854, 852, 878  
Technics . . . . . . . . . . . . . . . . . . . . . . . . . . . .856  
Theta Digital . . . . . . . . . . . . . . . . . . . . . . . .853  
Victor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .876  
Yamaha . . . . . . . . . . . . . . . . . . . . . . . . . . . .857  
DVD BRAND AND REMOTE CODE(S)  
Denon . . . . . . . . . . . . . . . . . . . . . . . . . . . . .859  
GE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .862  
Harman/Kardon . . . . . . . . . . . . . . . . . . . . . .871  
JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .868  
Kenwood . . . . . . . . . . . . . . . . . . . . . . . . . . .865  
Magnavox . . . . . . . . . . . . . . . . . . . . . . . . . .860  
Marantz . . . . . . . . . . . . . . . . . . . . . . . . . . . .866  
SATELLITE RECEIVER BRAND AND  
REMOTE CODE(S)  
AlphaStar . . . . . . . . . . . . . . . . . . . . . . . . . . . 799  
Amplica . . . . . . . . . . . . . . . . . . . . . . . . . . . . 099  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture-in-Picture (PIP) • Basic Connections  
USING PIP (BASIC CONNECTIONS)  
PIP Window  
2
icture-In-Picture (PIP) is the  
Pshowing of two pictures on the TV  
screen at the same time—one main  
screen picture and one small picture,  
or PIP.  
Back of TV  
NA IN 75Ω  
MONITOR OUT  
AV1 IN  
2 IN  
Y
VIDEO  
S-VIDEO  
MONO/L  
Main Screen  
AUDIO  
R
NOTE: The PIP picture must be sup-  
plied by a VCR (or other accessory  
device equipped with a VIDEO  
OUT[PUT] jack). The following con-  
nection example uses the AV1  
IN(puts), but you may use AV2  
instead, if you would like.  
Back of VCR  
OUT  
OUT  
ANTENNA  
OUT  
R
L
VIDEO  
IN  
AUDIO  
IN  
Outdoor or  
Indoor  
Antenna  
ANTENNA  
IN  
BEGIN  
OR  
Connect an antenna or cable TV  
signal to the ANTENNA IN(put) on  
the back of the VCR.  
1
Cable TV Signal  
Connect the VIDEO OUT jack  
on the VCR to the AV1 IN(put) for  
VIDEO on the back of the TV.  
VCR in  
TV Mode  
3
Also connect the AUDIO OUT(puts)  
(R and L) jacks from the VCR to the  
AV1 IN(puts) (R and L) for AUDIO  
on the back of the TV.  
+
AV  
i
SAP  
TV  
VCR  
1
4
2
3
6
VCR  
12:00  
ACC  
06  
5
8
0
12:00  
06  
7
9
SMART  
SMART  
Channel Selection  
Through VCR  
Turn the VCR and TV on.  
MENU  
SURF  
6
Place the VCR in TV mode—Use  
the VCR/TV button on the VCR.  
CH  
Press the PIP on/off button on  
the TV remote.  
12:00  
19  
NOTE: When selecting  
channels on the VCR  
for the PIP window, use  
the CH(annel) Scan  
(+, —) buttons rather  
than the PIP CH(annel)  
UP/DN buttons.  
PIP  
URR
A/CH  
PIP CH  
The PIP window should show in one  
of the corners of the TV screen.  
UP  
DN  
Press the PIP SOURCE button  
on your TV remote until the input  
source to which you connected your  
VCR (in this example, AV 1) appears  
in the PIP window.  
SMART HELP  
Remember, be sure the TV  
remote is in the correct mode  
when you switch back and forth  
between the VCR and the TV.  
Select the channel on the VCR to  
view in the PIP window. You can do  
this with your TV remote (in VCR  
mode) if you have set it to work with  
your VCR (see page 42).  
If you see the same picture on the  
main screen and in the PIP window,  
you need to be sure you have select-  
ed the source to which you connected  
the VCR.  
Put the TV/VCR/ACC switch on the  
remote in TV mode and select the  
channel on the TV to view on the  
main screen.  
For other possible PIP connections see  
the “More PIP Connections” section.  
If you have a single (monaural) audio  
output VCR, “Y” connectors are  
available to complete your connec-  
tion. Contact your dealer, or our Parts  
Information Center at  
1-800-851-8885 for details.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture-in-Picture (PIP) • PIP Remote Control Buttons  
USING THE PIP REMOTE CONTROL BUTTONS  
ollow these steps to practice using  
Fthe PIP buttons. You can change  
the size of the PIP window, reposition  
it, freeze its image, or swap it with the  
main picture.  
BEGIN  
Press the PIP ON/OFF button to  
show the PIP window. PIP appears in  
one of the four corners of the screen.  
Press the PIP ON/OFF button again to  
reduce the window size. Press the PIP  
ON/OFF button a third time to  
remove the PIP window from the  
main screen.  
1. PIP ON/OFF  
Press the PIP ON/OFF button to  
show the PIP window again.  
2. POSITION  
Press the POSITION button to  
move the PIP window to any of the  
four corners.  
Press the FREEZE button to  
stop the action within the PIP window.  
Press the FREEZE button again to  
resume normal viewing.  
Press the SWAP button to swap  
the main screen picture with the PIP  
picture. Press the SWAP button again  
to return the main and PIP screens to  
their original positions.  
3. FREEZE  
+
AV  
i
SAP  
When you are finished using  
PIP, press the PIP ON/OFF button  
twice to remove PIP from the main  
screen.  
TV  
VCR  
1
2
5
8
0
3
ACC  
4
6
9
7
SMART  
SMART  
MENU  
SURF  
4. SWAP  
CH  
PIP  
INCR. .  
PIP CH  
UP  
DN  
4
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture-in-Picture (PIP) • The Color and Tint Controls  
ADJUSTING THE PIP COLOR AND TINT CONTROLS  
he Picture-in-Picture (PIP)  
TCOLOR and TINT controls allow  
you to make fine-tune adjustments to  
the PIP picture settings.  
BEGIN  
Press the MENU/SELECT but-  
ton on the remote control to show the  
on-screen menu.  
PICTURE  
SOUND  
FEATURES  
INSTALL  
TIMER  
AUTOLOCK  
PIP  
CLOSED CAP  
Press the CURSOR DOWN but-  
ton twice to highlight FEATURES.  
FEATURES  
TIMER  
TIME  
AUTOLOCK  
PIP  
CLOSED CAP  
START TIME  
STOP TIME  
CHANNEL  
ACTIVATE  
Press the CURSOR RIGHT but-  
ton to enter the FEATURES menu.  
Press the CURSOR DOWN but-  
ton twice to highlight PIP.  
FEATURES  
TIMER  
COLOR  
TINT  
Press the CURSOR RIGHT but-  
ton again to shift the display to the  
COLOR adjustment bar.  
AUTOLOCK  
PIP  
CLOSED CAP  
Press the CURSOR RIGHT or  
LEFT button to adjust the COLOR  
bar to the desired level.  
FEATURES  
PIP  
+
V  
i
SAP  
TV  
Press the CURSOR DOWN but-  
ton to highlight the TINT adjustment  
bar.  
COLOR  
TINT  
35  
35  
VCR  
ACC  
1
4
2
5
8
0
3
6
9
7
Press the CURSOR RIGHT or  
LEFT button to adjust the TINT bar  
to the desired level.  
SMART  
SMART  
MENU  
SURF  
5
3
FEATURES  
PIP  
Press the i+ button to remove the  
menu from the screen.  
COLOR  
TINT  
35  
CH  
2
INCR
A/CH  
4
7
PIP CH  
UP  
DN  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture-in-Picture (PIP) • More Connections  
MORE PIP CONNECTIONS  
his page shows how to hook PIP  
Tup with a cable box and a VCR.  
BEGIN  
First, use an optional signal  
splitter and connect the original cable  
TV signal to both the CABLE IN on  
the cable converter and the ANTEN-  
NA plug on the rear of the television.  
3
Back of TV  
ANTENNA IN 75Ω  
MONITOR OUT  
AV1 IN  
2 IN  
Y
Connect the CABLE OUT on the  
Converter to the ANTENNA IN on the  
VCR.  
VIDEO  
Pb  
Pr  
S-VIDEO  
MONO/L  
AUDIO  
R
Connect the VIDEO OUT jack  
on the VCR to the VIDEO IN jack on  
the TV.  
Also connect the AUDIO OUT (right  
and left) jacks from the VCR to the  
AUDIO IN jacks on the television.  
Video Cables  
(Yellow)  
Audio Cables  
(Red and White)  
1
OUT  
VIDEO  
IN  
OUT  
ANTENNA  
OUT  
L
R
AUDIO  
IN  
Signal  
Splitter  
ANTENNA  
IN  
Contact the Parts  
Information Center  
at 1-800-851-8885  
to order any optional  
accessories.  
VCR  
2
CABLE OUT  
CABLE IN  
SMART HELP  
Remember, to use the  
cable TV converter box to  
select channels for PIP, the VCR  
must be set to the same channel as  
the channel selection switch on the  
back of the cable converter (either  
channel 3 or 4).  
Cable TV Converter  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Information • Helpful Hints  
HELPFUL HINTS  
If you are having difficulties with your product, check this list of difficulties and possible solutions before requesting service. You  
may be able to solve the problem yourself. Charges for TV installation and adjustment of customer controls are not covered under  
your warranty. If you need to call a customer service representative, please know the model number and serial number of your prod-  
uct before you call. This information is displayed on the back of the product. Also, please take a moment to identify the problem you  
are having, and be prepared to explain this to the representative. If you believe the representative will need to help you with opera-  
tions, please stay near the product. Our representative will be happy to assist you.  
CAUTION  
The continual presence of nonmoving images on your TV screen can damage the picture tube.  
A video source such as a video game, CDI, or TV information channel that shows a constant nonmoving pattern on the TV screen  
can damage the picture tube. When your TV is continuously used with such a source, the nonmoving portion of the on-screen image  
can become permanently fixed on the picture tube. When you are not using the video source, turn it off. Also, regularly alternate the  
use of such video sources with normal TV viewing.  
Cleaning and Care  
• To avoid possible shock hazard, be sure the TV is unplugged from the electrical outlet before cleaning.  
• When you are cleaning the TV, take care not to scratch or damage the screen surface. Avoid wearing jewelry or using anything  
abrasive. Wipe the front screen with a cloth dampened with water. Use even, easy, vertical strokes when cleaning.  
• Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool, clear water. Use a clean, dry cloth  
to dry the wiped surfaces.  
• Never use thinners, insecticide sprays or other chemicals on or near the cabinet, as they might cause permanent marring of the  
cabinet finish.  
No power  
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the remote control  
power or TV power/standby button again. The location of the TV power/standby button is illustrated on page *S-2.  
• Check that the outlet is not on a wall switch.  
• If you are using an AC power strip, be sure the fuse on the power strip is not blown.  
No picture  
• Check antenna or cable connections to your TV. Be sure they are secure. Details are on pages *S-1, 47, and 50.  
• Check the Tuner Mode control for the correct tuner setting. Details are on page *S-3.  
• Try running the Auto Program feature to scan for all available channels. Details are on page *S-3.  
• Press the AV button on the remote to ensure that the correct signal source is selected (ANTENNA IN[put], AV 1, CVI, or AV 2).  
Details are on pages *S-2 and 41.  
No Sound  
• Check the volume buttons. Details are on pages *S-2 and 41.  
• Check the mute button on the remote. Details are on page *S-2.  
• Check the Audio Out and Speaker controls. Details are on pages 34 and 35.  
• If you are attempting to connect auxiliary equipment, check the audio connections. Details are on pages 47 and 50.  
• If applicable, check the audio receiver for the correct operating mode. Details are on page 35.  
Remote does not work  
• Check the batteries. If necessary, replace them with AA heavy duty (zinc chloride) or alkaline batteries. Details are on page *S-2.  
• Clean the remote control and the remote sensor window on the TV. To locate the TV remote sensor window, see page *S-2.  
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the remote power or TV  
power/standby button again. To locate the TV power/standby button, see page *S-2.  
• If you are using an AC power strip, be sure the fuse on the power strip is not blown.  
• Check to be sure the TV is not on a wall switch.  
TV displays wrong channel or no channels above 13  
• Select the channel again.  
• Add the desired channel numbers into the TV’s memory using the Channel Edit control. Details are on page *S-4.  
• Check to be sure the Tuner Mode is set to the Cable option and run the Auto Program feature to find and store all channels with  
active broadcast signals available in your area. Details are on page *S-3.  
*S refers to the Setup and Quick Use Guide that came with your TV.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Information • Glossary  
GLOSSARY OF TELEVISION TERMS  
Audio/Video Inputs ¥ Connectors (RCA phono-type plug),  
located on the back of the TV, used for the input of audio and  
video signals. These inputs are designed for use with VCRs (or  
other accessories) to receive higher picture resolution and offer  
sound-connection options.  
Picture-in-Picture ¥ The showing of two pictures on the TV  
screen at the same time (one main screen picture and one small  
picture, or PIP).  
Programming ¥ The process of adding or deleting channel num-  
bers in the televisionÕs memory circuits. Through programming,  
the TV ÒremembersÓ only the locally available or desired chan-  
nel numbers and skips over any unwanted channel numbers.  
Closed Captioning ¥ The broadcast standard feature that allows  
you to read the voice content of television programs on the TV  
screen. Designed to help the hearing impaired, Closed  
Captioning uses on-screen text boxes to show dialogue and con-  
versations while a TV program is in progress.  
PTV ¥ Projection Television. (Rear- and/or front-projection  
design systems are available.)  
Remote Control Sensor Window ¥ The window or opening  
found on the television control panel through which infrared  
remote control command signals are received.  
Component Video Input ¥ The input that allows the separate  
reception of blue, red, and luminance signals. Provides the high-  
est possible color and picture resolution in the playback of digi-  
tal signal source material, such as the kind available from DVD  
players. Allows improved bandwidth information not possible  
through composite video (A/V) or S-Video Connections.  
RF ¥ Radio Frequency or modulated signal design used as the  
carrier for television broadcasts.  
RF coaxial cable ¥ Used to connected a broadcast or cable sig-  
nal to the TV. Also can be used to connect a VCR to the TV (or  
cable box or satellite receiver).  
Identify ¥ The method by which a TV remote control searches  
and finds an operating code for another product (such as a VCR  
or a cable converter). After the code has been Òidentified,Ó the  
TV remote control can operate and send commands to the other  
product.  
Second Audio Program (SAP) ¥ An additional audio channel  
provided for in the Multichannel Television Sound (MTS) broad-  
cast standard. A monaural soundtrack included within the record-  
ed or video signal (usually containing a second language transla-  
tion for the displayed programming).  
Incredible Stereo (or Surround) ¥ False acoustic management  
of the audio signal that produces a dramatic expansion of the  
wall of sound that surrounds the listener and heightens overall  
viewing pleasure.  
S-Video Input ¥ Signal input that allows direct connection of  
high-resolution video sources, such as satellite, DVD (digital  
video disc), S (Super)-VHS videocassette recorder, or video  
games. Provides improved picture resolution, sharpness, and  
clarity.  
i+ remote control button¥ Allows the user to quickly confirm  
what channel number is currently being viewed. The i+ button-  
can also be used to clear the TV of on-screen displays or infor-  
mation (rather than waiting for the displays to Òtime out,Ó or  
automatically disappear from the screen).  
TwinÐlead Wire ¥ The more commonly used name for the two-  
strand, 300-ohm antenna wire used with many indoor and out-  
door antenna systems. In many cases, this type of antenna wire  
requires an additional adapter (or balun) in order to connect to  
the 75-ohm input terminals designed into the more recent TVs  
and VCRs.  
Menu ¥ An on-screen list of feature controls that are available  
for you to adjust.  
Multichannel Television Sound (MTS) ¥ The broadcast stan-  
dard that allows for stereo sound to be transmitted with the TV  
picture.  
On-screen Displays (OSD) ¥ The wording or messages generat-  
ed by the television (or VCR) to help you with specific feature  
controls (color adjustment or programming, for example).  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Information • Index  
INDEX  
alternate channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 ImageMax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
antenna hookup . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q-1, 47, 50 language control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q-3  
audio out control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 name control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q-4  
audio outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 picture adjustment controls . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
audio/video (AV) inputs . . . . . . . . . . . . . . . . . . . . . . . . . .47,50 PIP (picture-in-picture)  
AutoChron control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q-4  
AutoLock control  
basic connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47  
color and tint controls . . . . . . . . . . . . . . . . . . . . . . . . . . .49  
more connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50  
remote control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . .48  
access code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
block channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
clearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 registration/welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
movie ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 remote control  
no rating broadcasts . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26  
on/off control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
battery installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q-2  
button descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q-2  
settings review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 safety/precautions . . . . . . . . . . . . . . . . . . . .*Q-1,*Q-2, 2, 3, 51  
unrated broadcasts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 SAP (second audio program) . . . . . . . . . . . . . . . . . . . . . . . . .33  
auto program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q-3 sleep timer control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40  
av button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 SmartPicture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37  
AVL (audio volume leveler) control . . . . . . . . . . . . . . . . . . .31 SmartSound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38  
balance control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 speakers control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35  
bass boost control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 stereo/mono control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33  
cable converter box connection . . . . . . . . . . . . . . . . . .*Q-1, 50 surf button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39  
cable TV hookup . . . . . . . . . . . . . . . . . . . . . . . . . .*Q-1, 47, 50 table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
channel edit control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q-4 timer control  
channel name control . . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q-4  
clock (timer control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
closed captioning control . . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
connections  
activate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
channel selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
start time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
stop time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
time display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
treble control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30  
accessory devices . . . . . . . . . . . . . . . . . . . . . . .*Q-1, 47, 50  
basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q-1, 47  
convergence controls  
red/blue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 tuner mode control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q-3  
multipoint red/blue . . . . . . . . . . . . . . . . . . . . . . . . . . .10–11 TV buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q-2  
save multipoint settings . . . . . . . . . . . . . . . . . . . . . . .10–11 VCR connections . . . . . . . . . . . . . . . . . . . . . . . . . .*Q-1, 47, 50  
undo multipoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 volume control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41  
DNR (dynamic noise reduction) control . . . . . . . . . . . . . . . . .7 warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56  
glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52  
*Q refers to the Quick Use and Setup Guide that came with your TV.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Philips Factory Service Locations  
FACTORY SERVICE LOCATIONS  
Detroit/Toledo  
•
Cleveland/  
•
•
N Ohio •  
•
Chicago  
★ Columbus  
•
San Francisco/Metro Area  
★ Los Angeles  
Charlotte  
★
•
★ Pittsburgh/WV Area  
Knoxville/E Tennessee  
•
•
•
Philadelphia/S New Jersey  
Atlanta/N Georgia  
• Dallas  
★ Wash/Balt  
★ Orlando  
•
Houston  
Tampa/W Florida  
★ Ft. Myers/SW Florida  
•
★ Indicates In-Home Service Only  
★ Miami/SE Florida  
• Indicates In-Home/Carry-In Service  
NOTE: If you reside in one of our Philips Factory Service Branch areas (see directory on back), you can contact the nearest Service Branch to  
obtain efficient and expedient repair for your product. If your product is In-Warranty, you should have proof-of-purchase to ensure No Charge  
Service. For Out-of-Warranty service, call the location nearest you.  
NOTA: Si vous résidez dans une des régions desservies par une succursale de service après vente du fabricant Philips (voir liste ci-dessous),  
vous pourrez contacter la branche de service après vente la plus près de chez vous pour obtenir un service après vente rapide et efficace. Si le  
produit est sous garantie, il suffira de présenter une preuve d`achat pour bénéficier d'un service sans frais. Pour les produits non couverts par la  
garantie, contactez le centre le plus près de chez vous.  
NOTA: Si Ud. reside en una de nuestras zonas para sucursales Philips de servicio al de fábrica (ver directorio más abajo), Ud. puede comunicarse  
con la sucursal de servicio más cercana para obtener una reparación oportuna y eficaz de su producto. Si su producto está todavía bajo garan-  
tía, Ud. debe presentar comprobante de compra para no ocasionar ningunos cargos por servicio. Para servicio después del vencimiento de la  
garantía, llame al lugar más cercano de los abajo indicados.  
In Canada  
How you can obtain efficient and expedient carry-in, mail-in, or in-home service for your product  
Please contact Philips at  
1-800-661-6162 (French speaking)  
1-800-363-7278 (English speaking)  
Au Canada  
Comment obtenir le service après-vente pour les produits apportés ou envoyés par la poste à notre centre de service ou le service à domicile  
Veuillez contacter philips á:  
1-800-661-6162 (Francophone)  
1-800-363-7278  
En el Canadá  
Cómo recibir servicio efficiente para su producto, en persona, por correo o a domicillo  
Favor de comunicarse con Philips al:  
1-800-661-6162 (francófono)  
1-800-363-7278 (anglófono)  
EL4482-3 Rev. CC  
3135 015 07541  
MAC2929 Rev. BB - 1/1/2001  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Philips Factory Service Locations  
FACTORY SERVICE LOCATIONS  
QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE CENTER  
NEAR YOU. YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT CARRY-IN, MAIL-IN, OR IN-HOME SERVICE, AND YOU WILL RECEIVE PEACE OF MIND,  
KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPS’ FACTORY SERVICE.  
COMMENT OBTENIR NOTRE SERVICE APRÈS VENTE RAPIDE ET EFFICACE SOIT PAR COURRIER, À DOMICILE, OU EN SE PRÉSENTANT À UN CENTRE DE SERVICE PHILIPS. PLUS DE 600 CENTRES  
DE RÉCEPTION DE PRODUITS À RÉPARER À TRAVERS LE PAYS: CONTACTER LE CENTRE DE SERVICE AUX CONSOMMATEURS LE PLUS PROCHE POUR SAVOIR L’EMPLACEMENT DE CES DÉPÔTS  
DANS UN RAYON DE 50 À 75 MILES (80 KM À 120 KM) DU CENTRE DE SERVICE LOCAL.  
CÓMO OBTENER UN SERVICIO OPORTUNO Y EFICIENTE POR CORREO, EN CASA O EN PERSONA PARA SU PRODUCTO A TRAVÉS DE UN CENTRO PHILIPS DE SERVICIO. MAS DE 600 SITIOS POR  
TODO EL PAIS PARA LA RECEPCION DE PRODUCTOS NECESITADOS DE REPARACIONES: COMUNICARSE CON EL CENTRO DE SERVICIO DE FABRICA MAS CERCANO PARA ESTOS LUGARES DENTRO  
DE UN RADIO DE 80 A 120 KM (50 A 75 MILLAS) DEL CENTRO DE SERVICIO LOCAL.  
ATLANTA  
CLEVELAND  
CHICAGO  
Philips Factory Service  
200 N. Cobb Pkwy., Suite 120  
Marietta, GA 30062  
800-273-1501  
Philips Factory Service  
950 Keynote Circle  
Brooklyn Heights, OH 44131  
800-331-7037  
Philips Factory Service  
1279 W. Hamilton Pkwy.  
Itasca, IL 60143  
800-531-2922  
TAMPA  
DETROIT  
KNOXVILLE  
Philips Factory Service  
1911 US Highway 301 North  
Tampa, FL 33619  
800-442-2027  
Philips Factory Service  
25173 Dequindre  
Madison Heights, MI 48071  
800-438-1398  
Philips Factory Service  
6700 D Papermill Rd.  
Knoxville, TN 37919  
800-821-1767  
SAN FRANCISCO  
Philips Factory Service  
681 East Brokaw Rd.  
San Jose, CA 95112  
800-300-9013  
DALLAS  
PHILADELPHIA  
Philips Factory Service  
415 N. Main Street, #107  
Euless, TX 76040  
800-952-3254  
Philips Factory Service  
352 Dunks Ferry Rd.  
Bensalem, PA 19020  
800-847-9320  
HOUSTON  
Philips Factory Service  
1110 N. Post Oak Rd., Suite 100  
Houston, TX 77055  
800-952-3254  
MAC2929 1/1/2001  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
PRO JECTIO N TELEVISIO N  
One Year Free Labor  
One Year Free Service on Parts  
Two Years Free Service on Cathode Ray Tube Parts / 30 days Free Service on Projection TV Screen  
This product can be repaired in-home.  
W HO IS CO VERED?  
MAKE SURE YO U KEEP...  
You must have proof of purchase to receive warranty service. A sales  
receipt or other document showing that you purchased the product is  
considered proof of purchase.  
Please keep your sales receipt or other document showing proof of  
purchase. Attach it to this owner’s manual and keep both nearby.  
Also keep the original box and packing material in case you need to  
return your product.  
W HAT IS CO VERED?  
Warranty coverage begins the day you buy your product. for one year  
thereafter (30 days for the projection TV screen), all parts will be  
repaired or replaced, and labor and transportation are free. From one to  
two years from the day of purchase, you pay for the replacement or  
repair of all parts except the cathode ray tube and the “Clear-Vu” lens,  
and for all labor and transportation charges. After two years from the  
day of purchase, you pay for the replacement or repair of all parts except  
the “Clear-Vu” lens (which is guaranteed against manufacturer’s defects  
for the life of the product), and for all labor and transportation charges.  
BEFO RE REQ UESTING SERVICE...  
Please check your owner’s manual before requesting service.  
Adjustments of the controls discussed there may save you a service  
call.  
TO GET W ARRANTY SERVICE...  
Repair must be performed by an authorized service center or a factory  
service center. If you do not live near a factory service center, contact  
your dealer. If your dealer is an authorized service center, he will  
arrange repair. If your dealer is not an authorized service center, he  
will direct you to the authorized service center engaged by him to  
service the products he sells.  
All parts, including repaired and replaced parts, are covered only for  
the original warranty period. When the warranty on the product  
expires, the warranty on all replaced and repaired parts also expires.  
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties,  
including implied warranties of merchantability and fitness for a partic-  
ular purpose, are limited in duration to the duration of this express  
warranty. But, because some states do not allow limitations on how  
long an implied warranty may last, this limitation may not apply to  
you.)  
W HAT IS EXCLUDED?  
Your warranty does not cover:  
•
labor charges for installation or setup of the product, adjustment of  
customer controls on the product, and installation or repair of  
antenna systems outside of the product.  
(In Canada, this warranty is given in lieu of all other warranties. No  
other warranties are expressed or implied, including any implied war-  
ranties of merchantability or fitness for a particular purpose. Philips is  
not liable under any circumstances for any direct, indirect, special, inci-  
dental or consequential damages, howsoever incurred, even if notified  
of the possibility of such damages.)  
•
product repair and/or part replacement because of misuse, acci-  
dent, unauthorized repair or other cause not within the control of  
Philips Consumer Electronics Company.  
•
•
reception problems caused by signal conditions or cable or antenna  
systems outside the unit.  
a product that requires modification or adaptation to enable it to  
operate in any country other than the country for which it was  
designed, manufactured, approved and/or authorized, or repair of  
products damaged by these modifications.  
IF YO U HAVE Q UESTIO NS...  
Please contact Philips at:  
•
incidental or consequential damages resulting from the product.  
(Some states do not allow the exclusion of incidental or consequen-  
tial damages, so the above exclusion may not apply to you. This  
includes, but is not limited to, prerecorded material, whether copy-  
righted or not copyrighted.)  
1-800-661-6162 (French Speaking)  
1-800-363-7278 (English Speaking)  
REMEMBER...  
Please record the model and serial numbers found on the product  
below. Also, please fill out and mail your warranty registration card  
promptly. It will be easier for us to notify you if necessary.  
•
a product used for commercial or institutional purposes.  
W HERE IS SERVICE AVAILABLE?  
Warranty service is available in all countries where the product is offi-  
cially distributed by Philips Consumer Electronics Company. In coun-  
tries where Philips Consumer Electronics Company does not distribute  
the product, the local Philips service organization will attempt to pro-  
vide service (although there may be a delay if the appropriate spare  
parts and technical manual(s) are not readily available).  
MODEL # ________________________________________________  
SERIAL # ________________________________________________  
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.  
Philips Service Company, P.O. Box 2976, Longview, Texas 75606, (903) 242-4800  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Musical Instrument FX Series User Manual
Petsafe Water Dispenser 400 1254 19 User Manual
Philips Satellite Radio STU130A User Manual
Pioneer Stereo Amplifier A A9 J User Manual
Planet Technology Switch FSD 5816 User Manual
Polaroid Photo Printer DIGITAL PHOTO PRINTER User Manual
Polycom Network Router XS 3500 User Manual
Porter Cable Air Compressor N003568 User Manual
Power Acoustik Car Video System PMD 121CMX User Manual
Profoto Camera Accessories PRO 8A 1200 AIR User Manual