AX5002
AX5003
AX5004
Portable CD Player
PROGRAM
Download from Www.Somanuals.com. All Manuals Search And Download.
México
Es necesario que lea cuidadosamente su instructivo de manejo.
PRECAUCIÓN - ADVERTENCIA
No abrir, riesgo de choque eléctrico
ATENCIÓN
Verifique que el voltaje de alimentación
sea el requerido para su aparato
Para evitar el riesgo de choque eléctrico, no quite la tapa.
En caso de requerir servicio, dirijase al personal calificado.
Descripción:
Modelo:
Tocadiscos de CD portatil
AX 5002/01, /11, /16, AX 5003/01, /11, /16,
AX 5004/01, /11, /16
Alimentación:
Consumo:
110–127/220–240 V~ 50–60 Hz
4 W (AY 3170)
Importador:
Domicilio:
Philips Mexicana, S.A. de C.V.
Norte 45, # 669, Col. Industrial Vallejo
Localidad y Telefono: C.P. 02300 México D.F., Tel. 5728 4200
Exportador:
País de Origen:
Philips Electronics Hong Kong, Ltd.
China
Nº de Serie:
______________________________
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO
ANTES DE USAR SU APARATO.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
5
7
8
4
3
9
0
2
!
@
1
#
$
^
%
Download from Www.Somanuals.com. All Manuals Search And Download.
3
English
Controls .................................................6 CD play..........................................12–13
Quick start .............................................7 Features.........................................14–18
Power supply...................................8–10 In-car connection.................................19
General information......................10–11 Troubleshooting.............................20–21
Français
Commandes.........................................22 Lecture CD.....................................28–29
Mise en service rapide........................23 Caractéristiques ............................30–34
Alimentation électrique ................24–26 Raccordement en voiture ....................35
Informations générales.................26–27 Pannes et remèdes .......................36–37
Español
Controles .............................................38 Reproducción de un CD.................44–45
Encendido rápido.................................39 Características ..............................46–50
Alimentación eléctrica..................40–42 Conexión al automóvil.........................51
Información general......................42–43 Localización de averías.................52–53
∑
Controls ...............................................54 CD play..........................................60–61
Quick start ...........................................55 Features.........................................62–66
Power supply.................................56–58 In-car connection.................................67
General information......................58–59 Troubleshooting.............................68–69
Guarantees
Philips product warranty for
Australia......................................72–73
Guarantee and service for
Polizia de garantía
Mexico.........................................70–71 New Zealand ....................................74
Download from Www.Somanuals.com. All Manuals Search And Download.
5
CONTROLS, refer to the illustration on page 3
QUICK START
1 OPEN 2...........opens the CD lid
1
OPEN
2
2 2;...................switches the player on, starts or pauses CD play
3 9 .....................stops CD play, clears a program or switches the player off
4 §....................skips and searches CD tracks forwards
5 ESP..................ELECTRONIC SKIP PROTECTION ensures continuous CD playback
regardless of vibrations and shocks
6 MODE..............selects the different playing possibilities: SHUFFLE,
AA
LR6
UM3
2.
2.
1.
1.
SHUFFLE REPEAT ALL, REPEAT, REPEAT ALL and SCAN
7 ........................display
3
CD
4
5
HOLD➟OFF
8 PROGRAM.......programs tracks and reviews the program
9 BASS...............switches the bass enhancement on and off. This button also
switches acoustic feedback (the beep) on/off when it is pressed for
more than 2 seconds
0 ∞....................skips and searches CD tracks backwards
! RESUME..........stores the last position of a CD track played
HOLD...............locks all buttons
6
PLAY
7
VOLUME
OFF ..................switches RESUME and HOLD off
@ LINE OUT/p....3.5 mm headphone socket, socket to connect the player to another
audio input of an additional appliance, remote control socket (not
on all versions)
# VOL E.........adjusts the volume
$ 4.5V DC ...........socket for external power supply
% ........................typeplate
!!!
^ ........................belt clip holder
Remote control (not on all versions)
Use only the Philips AY 3767 cord remote control with your CD-player. The buttons
on the remote control have the same functions as the corresponding buttons on
the CD-player.
1 If necessary, press 9 once or twice until the set is switched off,
2 Firmly plug the remote control into the LINE OUT/p socket of the CD-player, and
then connect the headphones to the socket of the remote control.
This set complies with the radio interference requirements of the
European Community.
3 Turn the volume down with VOL F on the remote control and set VOL E on
the CD-player to position 8.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
POWER SUPPLY
POWER SUPPLY
Batteries (supplied or optionally available)
ECO-PLUS NiMH battery information (for versions supplied with
the rechargeable ECO-PLUS NiMH battery AY 3362)
You can use the following batteries with this CD-player:
• normal batteries type LR6, UM3 or AA (preferably Philips), or
• alkaline batteries type LR6, UM3 or AA (preferably Philips).
Recharging works only on players supplied with the rechargeable ECO-PLUS NiMH
battery AY 3362.
Note: – Old and new or different types of batteries should not be used in
combination. Remove batteries if they are empty or if the player is
not going to be used for a long time.
Recharging the ECO-PLUS NiMH battery on board
1 Insert the rechargeable ECO-PLUS NiMH battery AY 3362.
2 Connect the mains adapter to the 4.5V DC socket of
the player and then to the wall socket.
y A is shown and ChArGEis displayed for 5
seconds.
Inserting batteries
1 Push OPEN 2 to open the CD lid.
2 Open the battery compartment and insert either
2 normal or alkaline batteries, or the rechargeable
NiMH battery AY 3362 (if supplied).
• Recharging stops after a maximum of 7 hours, or when you start playback.
3 When the battery is fully recharged,
and
FULLappear briefly in the display, before the
display switches off.
Battery indication
The approximate power level of your batteries is shown in the display.
Notes: – It is normal for the batteries to become warm during recharging.
– If the batteries become too warm, recharging will be interrupted for
approximately 30 minutes and Hotis displayed.
Battery full
Battery two-thirds full
Battery one-third full
Battery dead or empty. When the batteries are
dead or empty, the symbol A flashes, bAttis
displayed, and the beep tone sounds repeatedly.
– To ensure proper recharging on board, take care that contacts are clean.
– Use only the ECO-PLUS NiMH battery AY 3362.
Handling instructions
• Recharging already charged or half-charged batteries will shorten their lifetime.
We therefore recommend that you let the rechargeable ECO-PLUS NiMH battery
run till it is completely empty before you recharge it.
Average playing time of batteries under normal conditions
Battery type
ESP on
7 hours
22 hours
10 hours
ESP off
6 hours
19 hours
9 hours
Normal
• To avoid a short circuit, do not let the battery touch any metal object.
Alkaline
• If the battery becomes empty soon after recharging, then either its contacts are
dirty or it has reached the end of its lifetime.
Rechargeable ECO-PLUS NiMH battery
Batteries contain chemical substances, so they should be disposed
of properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
9
POWER SUPPLY / GENERAL INFORMATION
GENERAL INFORMATION
Mains adapter (supplied or optionally available)
CD-player and CD handling
Use only the AY 3170 adapter (4.5 V/300 mA direct
current, positive pole to the centre pin). Any other
product may damage the player.
• Do not touch the lens A of the CD-player.
• Do not expose the set, batteries or CDs to humidity,
rain, sand or excessive heat (caused by heating
equipment or direct sunlight).
V
DC
1 Make sure that the adapter’s voltage corresponds to
the local voltage.
• You can clean the CD-player with a soft, slightly
dampened, lint-free cloth. Do not use any cleaning
agents as they may have a corrosive effect.
2 Connect the adapter to the 4.5V DC socket of the
player and to the wall socket.
• To clean the CD, wipe it in a straight line from the centre towards the edge using a
soft, lint-free cloth. A cleaning agent may damage the disc! Never write on a CD or
attach a sticker to it.
Note: Always disconnect the adapter when you are not using it.
Belt Clip (not on all versions)
1 To attach the belt clip to the CD-player, position the
shaped grip (found on the back of the belt clip) so that
it fits into the belt clip hole of the CD-player.
• The lens may cloud over when the set is moved suddenly from cold to warm
surroundings. Playing a CD is not possible then. Leave the CD-player in a warm
environment until the moisture has evaporated.
BELT CLIP
• Active mobile phones in the vicinity of the CD-player may cause malfunctions.
• Avoid dropping the set as this may cause damage.
2 Turn the clip to LOCK as indicated on the set.
3 To detach, gently lift the belt clip and turn
to RELEASE as indicated on the set.
Headphones HE 545
• Connect the supplied headphones to the LINE OUT/p
LOCK
LIFT
socket of the player.
RELEASE
Note: LINE OUT/p can also be used for connecting the
player to your HiFi system (with a signal lead) or to
your car radio (with a cassette adapter or signal
lead). In both cases, the volume of the player must
be set to position 8.
Environmental information
• All redundant packing material has been omitted. We have done our utmost to
make the packaging easily separable into two mono materials: cardboard (box) and
polyethylene (bags, protective foam sheet).
Use your head when using headphones
Hearing safety: Do not play your headphones at a high volume. Hearing experts
advise that continuous use at high volume can permanently damage your hearing.
• Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the disposal of
packing materials, exhausted batteries and old equipment.
Traffic safety: Do not use headphones while driving a vehicle. It may create a hazard
and it is illegal in many countries. Even if your headphones are an open-air type
designed to let you hear outside sounds, do not turn up the volume so high that you
cannot hear what is going on around you.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
11
CD PLAY
CD PLAY
Playing a CD
Playback information
This CD-player can play all kinds of Audio Discs such
as CD-Recordables and CD-Rewritables. Do not try to
play a CD-ROM, CDi, VCD, DVD or computer CD.
•
If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded properly,
nF dISCis displayed, indicating that the CD has not been finalized. In that
case, use FINALIZE on your CD recorder to complete the recording.
•
When playing a CD-Rewritable (CD-RW), please note that it takes 3–15 seconds
after pressing 2; for sound reproduction to start.
1 Push the OPEN 2 slider to open the player.
•
•
Playback will stop if you open the CD lid.
2 Insert an audio CD, printed side up, by pressing the
CD onto the hub.
While the CD is read, 1-:-flashes in the display.
3 Close the player by pressing the lid down.
ESP
Volume and bass
4 Press 2; to switch the player on and start playback.
y The current track number and elapsed playing
time are displayed.
Volume adjustment
• Adjust the volume by using VOL E.
• You can pause playback by pressing 2;.
y The time at which playback was paused starts
flashing.
Bass adjustment
You can choose between the bass enhancement levels
dbb1and dbb2.
• You can continue playback by pressing 2; again.
1 Press BASS once for dbb1and twice
for dbb2.
5 Press 9 to stop playback.
y The total number of tracks and the total playing
time of the CD are displayed.
y dbb1or dbb2is displayed and
is shown.
2 To switch dbb1or dbb2off, press BASS
twice or once, respectively.
6 Press 9 again to switch the player off.
y
goes off.
• To remove the CD, hold it by its edge and press the
hub gently while lifting the CD.
Note: If there is no activity, the set will automatically
switch off after a while to save energy.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
13
FEATURES
FEATURES
Selecting a track and searching
Programming track numbers
Selecting a track during playback
• Briefly press ∞ or § once or several times to skip to
the current, previous or next track.
You can store up to 30 tracks to play in a program.
A single track may be stored more than once in the
program.
ESP
y Playback continues with the selected track, and
the track’s number is displayed.
1 While playback is stopped, select a track with
∞ or §.
Selecting a track when playback is stopped
1 Briefly press ∞ or § once or several times to select
the desired track. The track number is displayed.
2 Press PROGRAM to store the track.
y
PROGRAM lights up; the track number
programmed and Pwith the total number of
stored tracks are displayed.
2 Press 2; to start CD play.
y Playback starts with the selected track.
3 Select and store all desired tracks in this way.
Searching for a passage during playback
1 Keep ∞ or § pressed to find a particular passage in
a backward or forward direction.
4 Press 2; to start playback of your selected tracks.
y
PROGRAM is shown and playback starts.
y Searching starts while playback continues at low
volume. After 2 seconds the search speeds up.
• You can review the program by pressing PROGRAM for more than 2 seconds.
2 Release the button when you reach the desired passage.
y The display shows all the stored tracks in sequence.
y Playback continues from this position.
Notes: – If you press PROGRAM and there is no track selected,
SELECtis displayed.
Notes: – If the player is in SCAN mode (see MODE chapter), searching is not possible.
– In SHUFFLE, SHUFFLE REPEAT ALL or REPEAT mode (see MODE chapter), or
while playing a program, searching is only possible within the particular
track.
– If you try to store more than 30 tracks, FULLis displayed.
Clearing the program
• While playback is stopped, press 9 to clear .
program
y CLEAris displayed once, PROGRAM goes off,
and the program is cleared.
Note: The program will also be cleared if the power supply is interrupted, or if the
CD-player lid is opened, or if the set switches off automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
15
FEATURES
FEATURES
Selecting different playing possibilities – MODE
RESUME and HOLD
It is possible to play tracks in random order, to repeat a single track or the entire CD,
and to play the first few seconds of each track.
You can interrupt playback and continue (even after an
extended period of time) from the position where
playback stopped (RESUME) and you can lock all buttons
of the set so that no action will be executed (HOLD). Use
the RESUME–HOLD–OFF slider for these functions.
1 Press MODE during playback as often as required in
order to activate one of the following ‘modes’. The
active mode is shown in the display.
y
SHUFFLE: All tracks of the CD are played in
random order until all of them have been played
once.
ESP
RESUME – continuing from where you have stopped
1 Switch the slider to RESUME during playback to activate RESUME.
RESUME is shown.
y
y
SHUFFLE REPEAT ALL: All tracks of the CD are
played repeatedly in random order.
REPEAT: The current track is played repeatedly.
REPEAT ALL: The entire CD is played repeatedly.
2 Press 9 whenever you want to stop playback.
y
y
3 Press 2; whenever you want to resume playback.
y SCAN: The first 10 seconds of each of the
y
RESUME is shown and playback continues from
remaining tracks are played in sequence.
where you have stopped.
2 Playback starts in the chosen mode after 2 seconds.
• To deactivate RESUME, switch the slider to OFF.
RESUME goes off.
y
• To return to normal playback, press MODE repeatedly
until the display shows no active modes.
HOLD – locking all buttons
You can lock the buttons of the set by switching the slider to HOLD. Now, when a key
is pressed, no action will be executed. This is of use, for example, when transporting
the player in a bag. With HOLD activated, you can avoid accidental activation of other
functions.
1 Switch the slider to HOLD to activate HOLD.
y All buttons are locked. HOLD is shown when you press any button. If the set is
switched off, HOLD will be shown only when 2; is pressed.
2 To deactivate HOLD, switch the slider to OFF.
Note: If you deactivate HOLD by switching the slider to
RESUME, you will be activating the RESUME
function.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
17
FEATURES
IN-CAR CONNECTION
ESP
In-car use (connections supplied or optionally available)
Conventional portable CD-players subjected to a shock
or vibration during playback often skip parts of the CD. The
ELECTRONIC SKIP PROTECTION (ESP) feature, with which
your set is equipped, however, prevents such loss of
continuity when your player is subjected to light vibrations.
But ESP does not prevent playback interruptions caused by
vigorous exercise. Nor does it protect against damage
resulting from the player being dropped!
Only use the AY 3545 car
voltage converter (4.5V, DC,
positive pole to the centre pin)
and the AY 3501 car cassette
adapter. Any other product may
damage the set.
ESP
4,5 V DC
D
I
GIT
AL
D
I
GIT
AL
1 Put the CD-player on a
horizontal, vibration-free and
stable surface. Make sure it
is in a safe place, where the
• Press ESP during playback to activate the skip
protection.
player is neither a danger nor obstacle to either driver or passenger.
y
ESP is shown and the protection is activated.
2 Connect the DC plug of the voltage converter to the 4.5V DC socket of the CD-
player (only for a 12 V car battery, negative grounding).
• To deactivate the skip protection, press ESP again.
ESP goes off and the protection is deactivated.
y
3 Insert the voltage converter into the cigarette lighter socket. If necessary, clean the
cigarette lighter socket to obtain a good electrical contact.
4 Turn down the volume and connect the cassette adapter plug to the LINE OUT/p
socket of the CD player.
Pouch AY 3266 (supplied or optionally available)
The pouch enables you to conveniently carry the
CD-player so you can listen to music while exercising.
5 Carefully insert the cassette adapter into the car radio’s cassette compartment.
6 Make sure the cord does not hinder your driving.
1 Make sure ESP is activated.
7 Start the CD-player, set VOL E to position 8 and adjust the sound with the car
radio controls.
2 Fasten the pouch belt tightly around your waist.
• Always remove the voltage converter from the cigarette lighter socket when the
CD-player is not in use.
3 Put the CD-player into the pouch with the keys facing
away from your body, and close the flap.
Note: – Avoid excessive heat from the car heating or from direct sunlight (e.g. in a
parked car in the summer).
Notes: – While exercising, take care that the CD-player is not hit by a limb or other
object, such as a branch or post.
– If your car radio has a LINE IN socket, it is better to use this instead of the
cassette adapter. Simply connect a signal lead from the LINE OUT/p socket
of the CD-player to this LINE IN socket.
– Do not use the pouch if you are suffering from a skin irritation.
– Do not machine-wash the pouch as it could lose shape or colour.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
19
TROUBLESHOOTING
TROUBLESHOOTING
If a fault occurs, first check the points listed, before taking the set for repair.
WARNING
If you are unable to solve a problem by following these hints, consult your dealer or
service centre.
Under no circumstances should you try to repair the set yourself as this
will invalidate the guarantee.
Problem
No power,
playback does
not start
Possible cause
Solution
Problem
Possible cause
Solution
Batteries
The CD skips tracks. The CD is damaged or dirty.
Replace or clean the CD.
Batteries inserted incorrectly
Insert the batteries
correctly.
RESUME, SHUFFLE or PROGRAM is
active.
Switch RESUME, SHUFFLE
or PROGRAM off.
Batteries are empty.
Contact pins are dirty.
Mains adapter
Change the batteries.
Clean them with a cloth.
No sound or
bad sound quality
PAUSE is activated.
Loose, wrong or dirty
connections
Press 2;.
Check and clean
connections.
Loose connection
Connect the adapter
securely.
Volume is not adjusted.
Malfunctions due to nearness
of active mobile phones
Strong magnetic fields near
the player
In-car use
cassette adapter is
inserted incorrectly.
Temperature inside the car
is too high/low.
Cigarette lighter socket
is dirty.
Wrong playback direction of the Change the autoreverse
Adjust the volume.
Keep the player away from
active mobile phones.
Change the player’s position
or connections.
In-car use
Cigarette lighter is not powered Switch on ignition or insert
when ignition is off.
CD-RW (CD-R) is not recorded
properly.
batteries.
nF dISC
Use FINALIZE on the
CD recorder to complete
the recording.
indication
Insert the cassette adapter
correctly.
Let the player adjust to the
temperature.
Clean the cigarette
lighter socket.
no dISC
The CD is badly
scratched or dirty.
CD is not or incorrectly inserted. Insert a CD, label upwards.
The laser lens is steamed up.
Replace or clean the CD.
indication
Wait until the lens has
cleared.
Deactivate HOLD.
Disconnect the set from
power supply or take out
the batteries for
HOLD indication
and/or no reaction
to controls
HOLD is activated.
Electrostatic discharge
car cassette player’s
autoreverse feature
direction.
a few seconds.
CAUTION
Use of controls or adjustments or performance of procedures other
than herein may result in hazardous radiation exposure or other
unsafe operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
21
|