Register your product and get support at
32PFL5404/12
32PFL5404/60
42PFL5604/60
32PFL5604/60
42PFL5614/60
32PFL5614/60
22PFL5604/60
22PFL5614/60
19PFL5404/60
EN
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Connect devices
Back connectors for 19-22 inchTV
Back connectors for 26 inch
and largerTV
26
26
Contents
27
29
30
31
33
1 Notice
2
4
Side connectors
Connect a computer
Use Philips EasyLink
Use a Kensington lock
2 Important
3 TV overview
7
7
7
8 Product information
Supported display resolutions
Multimedia
34
34
34
34
34
34
35
Side controls and indicators
Remote control
Tuner/Reception/Transmission
Remote control
Power
SupportedTV mounts
4 Use your product
Switch yourTV on/off or to standby
Switch channels
9
9
9
10
10
10
Watch connected devices
AdjustTV volume
Use teletext
9 Troubleshooting
GeneralTV issues
TV channel issues
Picture issues
36
36
36
36
37
37
37
37
5 Use more of your product
11
11
AccessTV menus
Sound issues
Remove devices from the home menu 11
HDMI connection issues
Computer connection issues
Contact us
Change picture and sound settings
Use advanced teletext features
11
14
Create and use lists of favourite channels 14
Use timers
15
16
17
17
18
10 Index
38
UseTV lock
Use theTV clock
Use Scenea
WatchTV in dual view
View photos and play music from a USB
storage device
19
20
20
20
21
21
Update theTV software
ChangeTV preferences
Access decoder channel
Start aTV demo
Reset theTV to factory settings
6 Install channels
Automatically install channels
Manually install channels
Rename channels
22
22
23
24
25
Reorder channels
EN
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Pixel characteristics
1 Notice
This LCD product has a high number of
colour pixels. Although it has effective
pixels of 99.999% or more, black dots or
bright points of light (red, green or blue)
may appear constantly on the screen.
This is a structural property of the display
(within common industry standards) and
is not a malfunction.
2009 © Koninklijke Philips Electronics N.V.All
rights reserved.
Specifications are subject to change without
notice.Trademarks are the property of
Koninklijke Philips Electronics N.V or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other than
those specified herein, confirmation of their
validity and suitability must be obtained. Philips
warrants that the material itself does not
infringe any United States patents. No further
warranty is expressed or implied.
Compliance with EMF
Koninklijke Philips Electronics N.V.
manufactures and sells many products
targeted at consumers which, like
any electronic apparatus, in general
have the ability to emit and receive
electromagnetic signals.
One of Philips’ leading Business Principles
is to take all necessary health and safety
measures for our products, to comply
with all applicable legal requirements and
to stay well within the EMF standards
applicable at the time of producing the
products.
Philips is committed to develop, produce
and market products that cause no
adverse health effects. Philips confirms
that if its products are handled properly
for their intended use, they are safe
to use according to scientific evidence
available today.
Warranty
•
Risk of injury, damage to TV or void of
warranty! Never attempt to repair the TV
yourself.
•
•
Use the TV and accessories only as
intended by the manufacturer.
The caution sign printed on the back of
the TV indicates risk of electric shock.
Never remove the TV cover. Always
contact Philips Customer Support for
service or repairs.
Philips plays an active role in the
development of international EMF
and safety standards, enabling Philips
to anticipate further developments in
standardisation for early integration in its
products.
Mains fuse (UK only)
This TV is fitted with an approved
moulded plug. Should it become
necessary to replace the mains fuse, this
must be replaced with a fuse of the same
value as indicated on the plug (example
10A).
Any operation expressly prohibited in
this manual, or any adjustments and
assembly procedures not recommended
or authorised in this manual shall void the
warranty.
2
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Remove fuse cover and fuse.
2 The replacement fuse must comply with
BS 1362 and have the ASTA approval
mark. If the fuse is lost, contact your
dealer in order to verify the correct type.
3 Refit the fuse cover.
In order to maintain conformity to the EMC
directive, the mains plug on this product must
not be detached from the mains cord cable.
Copyright
VESA, FDMI and theVESA Mounting Compliant
logo are trademarks of theVideo Electronics
Standards Association.
®
Kensington and Micro Saver are registered US
trademarks of ACCO World corporation with
issued registrations and pending applications in
other countries throughout the world.
All other registered and unregistered
trademarks are the property of their respective
owners.
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Risk of injury or damage to the TV!
2 Important
•
Two people are required to lift and
carry a TV that weighs more than
25 kg.
When stand mounting the TV, use
only the supplied stand. Secure the
stand to the TV tightly. Place the
TV on a flat, level surface that can
support the combined weight of the
TV and the stand.
When wall mounting the TV, use
only a wall mount that can support
the weight of the TV. Secure the wall
mount to a wall that can support the
combined weight of the TV and wall
mount. Koninklijke Philips Electronics
N.V. bears no responsibility for
improper wall mounting that result in
accident, injury or damage.
Read and understand all instructions before you
use yourTV. If damage is caused by failure to
follow instructions, the warranty does not apply.
•
Safety
•
Risk of electric shock or fire!
•
•
Never expose the TV to rain or
water. Never place liquid containers,
such as vases, near the TV. If
liquids are spilt on or into the TV,
disconnect the TV from the power
outlet immediately. Contact Philips
Consumer Care to have the TV
checked before use.
•
Never place the TV, remote control
or batteries near naked flames or
other heat sources, including direct
sunlight.
•
Risk of injury to children!Follow these
precautions to prevent the TV from
toppling over and causing injury to
children:
To prevent the spread of fire, keep
candles or other flames away from
the TV, remote control and batteries
at all times.
•
Never place the TV on a surface
covered by a cloth or other material
that can be pulled away.
•
•
Ensure that no part of the TV hangs
over the edge of the surface.
Never place the TV on tall furniture
(such as a bookcase) without
anchoring both the furniture and TV
to the wall or a suitable support.
Educate children about the dangers
of climbing on furniture to reach the
TV.
•
•
•
Never insert objects into the ventilation
slots or other openings on the TV.
When the TV is swivelled ensure
that no strain is exerted on the
power cord. Strain on the power
cord can loosen connections and
cause arcing.
•
•
Risk of overheating! Never install the TV
in a confined space. Always leave a space
of at least 4 inches or 10 cm around the
TV for ventilation. Ensure curtains or
other objects never cover the ventilation
slots on the TV.
Risk of damage to the TV! Before you
connect the TV to the power outlet,
ensure that the power voltage matches
the value printed on the back of the TV.
Never connect the TV to the power
outlet if the voltage is different.
•
4
Risk of short circuit or fire!
•
Never expose the remote control or
batteries to rain, water or excessive
heat.
Avoid force coming onto power
plugs. Loose power plugs can cause
arcing or fire.
•
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Risk of injury, fire or power cord damage!
Never place the TV or any objects on the
power cord.
To disconnect the TV power cord easily
from the power outlet, ensure that you
have full access to the power cord at all
times.
When you disconnect the power cord,
always pull the plug, never the cable.
Disconnect the TV from the power
outlet and antenna before lightning
storms. During lightning storms, never
touch any part of the TV, power cord or
antenna cable.
Risk of hearing damage! Avoid using
earphones or headphones at high
volumes or for prolonged periods of time.
If the TV is transported in temperatures
below 5°C, unpack the TV and wait
until the TV temperature matches room
temperature before connecting the TV to
the power outlet.
Disposal of your old product and
batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
•
•
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
•
•
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Screen care
•
Avoid stationary images as much as
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
•
•
Clean the TV and frame with a soft,
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the TV.
•
•
Risk of damage to the TV screen! Never
touch, push, rub or strike the screen with
any object.
To avoid deformations and colour fading,
wipe off water drops as soon as possible.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Low standby power consumption
ECO-Green
The class-leading and highly advanced power
circuitry brings down the power consumption
of the TV to an extremely low level,
without losing out on the constant standby
functionality.
Power management (Available in selected
models only)
The advanced power management of this TV
ensures the most efficient use of its energy.
You can check how your personal TV settings,
the level of brightness in current onscreen
pictures and the surrounding light conditions
determine the relative power consumption.
End of use
To inform yourself on the correct disposal
of the TV and batteries, refer to ‘Disposal of
your old product and batteries’ in the user
manual (see ‘Disposal of your old product and
batteries’ on page 5).
•
•
•
High energy efficiency
Low standby power
Designed to facilitate recycling
Philips continuously focuses on lowering
the environmental impact of its innovative
consumer products. We aim our efforts
towards environmental improvements
during manufacturing, reduction of harmful
substances, energy-efficient use, end-of-life
instructions and product recycling.
Thanks to our environmental effort, this TV
has been awarded the European Ecolabel –the
You can find detailed information on standby
energy consumption, warranty policy, spare
parts and recycling of this TV on the Philips
This TV has features that contribute to
energy-efficient use. This TV was awarded
the European Ecolabel for its environmental
qualities.
Energy ef\ciency features
•
Ambient light sensor (Available in
selected models only)
To save energy, the built-in Ambient
light sensor lowers the brightness of the
TV screen when the surrounding light
darkens.
•
Energy saving
The energy saving setting of the TV
combines several TV settings that result
in saving energy. See the smart settings in
the setup menu.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
3 TV overview
This section gives you an overview of
1
2
commonly usedTV controls and functions.
28
27
26
25
3
4
5
Side controls and indicators
6
7
4
24
3
8
9
2
1
10
11
12
13
14
15
16
23
a
POWER: Switches the product on
or off. The product is not powered
off completely unless it is physically
unplugged.
b P/CH +/-: Switches to the next or
17
22
previous channel.
c
SOURCE: Selects connected devices.
18
d VOLUME +/-: Increases or decreases
volume.
19
20
21
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
a
(Standby-On)
o
p
(Stop)
•
•
Switches the TV to standby if it is on.
Switches on the TV if it is in standby.
Stops playback.
(Mute)
Mutes or restores volume.
b MHEG/TELETEXT
Toggles teletext on or off.
q P +/- (Programme +/-)
c
SOURCE
Selects connected devices.
Switches to the next or previous channel.
When the TV menu is on, this functions
as Page Up/Down.
d Colour buttons
Selects tasks or options.
r
FORMAT
Selects a picture format.
e AD (Audio Descriptor) (For RF Digital
TV only)
s 0-9 (Numeric buttons)
UK only: Enables audio commentary for
the visually handicapped.
Selects a channel or setting.
t
u
PICTURE
Launches the picture menu. (Not
supported on all models.
f
g
(Home)
Toggles the home menu on or off.
OPTIONS
Accesses options relating to the current
activity or selection.
SOUND
Launches the sound menu. (Not
supported on all models.)
h OK
Confirms an entry or selection and
v
w
+/- (Volume +/-)
Increases or decreases volume.
displays the channel grid, when watching
TV.
BACKP/P (Previous channel)
Returns to a previous channel or menu
screen.
i
j
(Navigation buttons)
Navigates menus.
x
GUIDE
INFO
Switches between channel grid and
programme list.
Displays program information, when
available. If the information spans multiple
pages, press OPTIONS to go to the next
page.
y SCENEA (Wallpaper)
Displays wallpaper on your TV screen.
z DEMO
k
l
m
n
(Backward)
Toggles the demonstration menu on or
off.
Searches backward.
(Forward)
Searches forward.
{ TV
Switches back to the aerial source.
(Play/Pause)
Starts, pauses or resumes playback.
| SUBTITLE (For RF Digital TV only)
Enables or disables subtitles.
(Record) (only used for Easylink
features (see ‘Use Philips EasyLink’ on
page 31))
Starts or stops video recording.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
4 Use your
• If you cannot locate your remote control and
want to switch on the TV from standby, press
P/CH +/- or SOURCE at the side of the TV.
product
This section helps you perform basic operations
(see ‘Use more of your product’ on page 11).
Switch channels
Switch your TV on/off or to
standby
To switch on
•
If the standby indicator is off, press
POWER at the side of the TV.
•
•
•
Press P +/- on the remote control or
P/CH +/- on the side of the TV.
Enter a channel number using the
Numeric buttons.
Use the channel grid (see ‘Switch
channels with the channel grid’ on page
10).
•
If the standby indicator is red, press
(Standby-On) on the remote control.
To switch to standby
•
Press (Standby-On) on the remote
control.
» The standby indicator switches to red.
To switch off
•
Press POWER at the side of the TV.
» The standby indicator switches off.
Note
• When you use a favourite list, you can only
select those channels in the list.
Tip
• Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch channels with the channel grid
The channel grid allows you to view all
available channels in a grid format.
Adjust TV volume
1 Press OK.
» The channel grid appears.
2 Press
to browse the channel grid
and preview a channel.
To increase or decrease volume
» The channel content is displayed after
•
•
Press
+/-.
a lapse of approximately two seconds.
Press VOLUME +/- on the side of the TV.
3 When you find a channel of your choice,
To mute or unmute sound
press OK to watch.
•
•
Press to mute the sound.
» The selected channel appears.
Press again to restore the sound.
Watch connected devices
Use teletext
Note
• Switch on the device before selecting it as a
source on the TV.
Use the source button
1 Press MHEG/TELETEXT.
» The main index page appears.
2 Select a page as follows:
•
•
•
•
Press the Numeric buttons to enter
a page number
Press P +/- or
to view the next
or previous page
Press the Colour buttons to select a
1 Press
SOURCE.
colour coded item
» The source list appears.
Press
BACK to return to a
2 Press the Navigation buttons to select a
previously viewed page
device.
3 Press MHEG/TELETEXT to exit teletext.
3 Press OK to confirm your choice.
» TheTV switches to the selected device.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Remove devices from the
5 Use more of
home menu
your product
If a device is no longer connected to theTV,
remove it from the home menu.
1 Press (Home).
Access TV menus
2 Press
to select a device to
Menus help you to install channels, change
picture and sound settings and access other
features.
remove.
3 Press OPTIONS.
» The [Remove device] list appears.
1 Press (Home).
4 Press OK and select [Remove] to remove
» The menu screen appears.
the device.
» The selected device is removed from
the home menu.
Setup
Add new device
Watch TV
Change picture and sound
settings
Change picture and sound settings to suit your
preferences.You can apply pre-defined settings
or change settings manually.
2 Press the
to select and navigate
through one of the following menus.
•
[Watch TV]Switches back to the
aerial source if another source is
selected.
Use settings assistant
Use the settings assistant to guide you through
the picture and sound settings.
•
•
[Setup]Accesses menus to change
picture, sound and other settings.
[Add new device]Adds new devices
to the home menu.
1 Press (Home).
2 Press
to select [Setup] > [Picture]
> [Settings assistant].
3 Press OK to confirm your choice.
3 Press OK.
» The [Settings assistant] menu appears.
Follow the on-screen instructions to
choose your preferred picture settings.
4 Press (Home)to exit.
Tip
• After selecting [Add new device], follow the
on-screen instructions to select the correct
device and connector.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
•
[Tint]Adjusts the colour balance in an
image.
[Custom tint]Customises tint setting.
[Pixel Plus HD]Adjusts picture quality to
optimal contrast, colour and sharpness.
Use smart picture
Use smart picture to apply pre-defined
picture settings.
•
•
1 Press PICTURE.
» The [Smart picture] menu appears.
•
•
•
[Dynamic contrast]Enhances
contrast. A [Medium] setting is
recommended.
[Dynamic backlight]Adjusts
brightness of the TV backlight to
match lighting conditions.
[Colour enhancement]Makes
colours more vivid and improves
the details in bright colours. You can
switch this feature on or off.
2 Press
to select one of the following
smart picture settings.
•
•
•
[Personal]Lists customised picture
settings.
[Vivid]Applies rich and dynamic
settings.
[Standard]Adjusts picture settings
to suit most environments and types
of video.
[MOVIE]Applies settings for movie
viewing.
•
•
•
•
[Light sensor]Adjusts settings dynamically
to match lighting conditions.
[PC mode]Adjusts the picture when a PC
is connected to the TV via HDMI or DVI.
[Picture format]Changes the picture
format.
[Horizontal shift]Adjusts the picture
horizontally for PC-VGA or YPbPr (
EXT2 or EXT3).
[Vertical shift]Adjusts the picture
vertically for PC-VGA or YPbPr ( EXT2
or EXT3).
•
•
•
[Game]Applies settings for games.
[Energy saving]Applies low-energy
settings.
3 Press OK to confirm your choice.
» The selected smart picture setting is
applied.
•
Manually adjust picture settings
1 Press (Home).
2 Press
to select [Setup] >
Change picture format
1 Press
[Picture].
» The [Picture] menu appears.
FORMAT.
» A picture format bar appears.
3 Press
to select one of the
2 Press
to select a picture format.
» The selected picture format is
activated.
following picture settings.
•
•
•
[Smart picture]Accesses pre-defined
smart picture settings.
[Contrast]Adjusts the intensity of bright
areas, keeping dark areas unchanged.
[Brightness]Adjusts the intensity and
details of dark areas.
3 Press OK to confirm your choice.
Summary of picture formats
The following picture settings can be
configured.
•
•
[Colour]Adjusts colour saturation.
[Hue]Compensates colour variations in
NTSC encoded transmissions.
[Sharpness]Adjusts sharpness in the
image.
[Noise reduction]Filters and reduces
noise in an image.
•
•
Note
• Depending on the format of the picture
source, some picture settings are not available.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Use smart sound
Use smart sound to apply pre-defined sound
settings.
[Auto format](Not for
HDMI, YPbPr - EXT2/
EXT3 or PC mode.)
Enlarges the picture
automatically to best fit
the screen. The subtitles
remain visible.
[Super zoom](Not for HD
and PC mode.) Removes
the black bars on the side
of 4:3 broadcasts. There is
minimal distortion.
1 Press SOUND.
» The [Smart sound] menu appears.
2 Press
to select one of the following
smart sound settings.
•
[Standard]Adjusts sound settings to
suit most environments and types of
audio.
•
[NEWS]Applies settings for spoken
audio, such as news.
[4:3]Shows the classic 4:3
format.
•
•
[MOVIE]Applies settings for movies.
[Personal]Applies the settings that
were customised in the sound menu.
[Subtitle zoom]Displays
4:3 pictures over the full
area of the screen, with
sub-titles visible. Part of
the top of the picture is
clipped off.
[Movie exp.14:9](Not for
HD and PC mode.) Scales
4:3 format to 14:9.
3 Press OK to confirm your choice.
» The selected smart sound setting is
applied.
Manually adjust sound settings
1 Press (Home).
2 Press
to select [Setup] > [Sound].
» The [Sound] menu appears.
[Movie exp.16:9](Not for
HD and PC mode.) Scales
4:3 format to 16:9.
3 Press
to select one of the
following sound settings.
•
[Smart sound]Accesses pre-defined
smart sound settings.
[Wide screen]Scales 4:3
format to 16:9.
•
•
•
•
[Bass]Adjusts the bass level.
[Treble]Adjusts the treble level.
[Volume]Adjusts the volume.
[Balance]Adjusts the balance of the
right and left speakers.
[Unscaled]Available in
selected models with
PC resolution under
1024 x 768, only. Allows
maximum sharpness.
Some distortion may
be present due to the
broadcaster’s systems.
Set your PC resolution to
wide screen mode for best
results.
•
•
[Dual I-II]Selects audio languages if
dual sound broadcast is available.
[Mono/Stereo]Selects mono
or stereo if stereo broadcast is
available.
[TV speakers]Turns TV speakers
on or off. Setting TV speakers
to automatic mode turns off the
speakers when content from an
EasyLink-compliant home theatre
system is detected.
•
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
[Surround]Enables spatial sound.
[Headphone volume]Adjusts
headphone volume.
[Auto volume]Automatically reduces
sudden volume changes, for example,
when switching channels.
[Delta volume]Levels out volume
differences between channels or
connected devices. Switch to the
connected device before you change
the delta volume.
Select teletext subpages
A teletext page can hold several subpages.
Subpages are displayed on a bar next to the
main page number.
•
1 Press MHEG/TELETEXT .
» The teletext screen appears.
•
2 Select a teletext page with subpages.
3 Press to enter a subpage.
» The subpage appears.
4 Press
to switch between subpages.
Use advanced teletext
Select T.O.P. teletext broadcasts
features
Table Of Pages (T.O.P.) teletext broadcasts
allow you to jump from one subject to
another without using page numbers. T.O.P.
teletext is not broadcast on all TV channels.
Access the teletext options menu
Access the teletext features through the
teletext options menu.
1 Press MHEG/TELETEXT.
» The teletext screen appears.
1 Press MHEG/TELETEXT.
» The teletext screen appears.
2 Press INFO.
» TheT.O.P. overview appears.
2 Press OPTIONS.
» The teletext options menu appears.
3 Press
to select a subject.
4 Press OK to view the page.
3 Press
to select one of the following
options.
•
•
•
[Freeze Page]Freezes the current
page.
Create and use lists of
[Dual/Full screen]Enables and
disables dual screen teletext.
[Reveal]Hides or reveals hidden
information on a page, such as
solutions to riddles or puzzles.
[Cycle subpage]Cycles through
subpages automatically if subpages
are available.
[Language]Switches to a different
language group to display a language
correctly when it uses a different
character set.
favourite channels
You can create lists of your preferredTV
channels and radio stations so that you can find
those channels easily.
•
•
Tip
• You can create and store up to four favourite
lists on your TV.
Select a favourite list
4 Press OK to confirm your choice.
5 Press MHEG/TELETEXT to exit the
1 When watching TV, press OK to display
teletext options menu.
the channel grid.
2 Press OPTIONS.
» The channel options menu appears.
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press OK to select [Show favourite ch.].
Tip
» The favourite lists appear.
• When watching TV, press OPTIONS
> [Mark as favourite] to save the current
channel into a favourite list.
4 Press
to select a favourite list.
5 Press OK.
» Only channels in the favourite list
appear in the channel grid.
Remove a channel from a favourite
list
View all channels
You can exit a favourite list, and view all
installed channels.
Note
• Select the favourite list to edit, before
removing a channel.
1 When watching TV, press OK to display
the channel grid.
1 When watching TV, press OK to display
2 Press OPTIONS.
the channel grid.
» The channel options menu appears.
2 Press OPTIONS.
3 Select [Show favourite ch.] > [All] .
» The channel options menu appears.
4 Press OK.
3 Press OK to enter [Show favourite ch.].
» All channels display in the channel grid.
4 Press
to select a favourite list and
press OK to confirm the choice.
Note
5 Press
to choose the channel that
• All favourite channels are marked by an
asterisk in the channel grid.
you wish to remove from the list.
6 Press OPTIONS.
7 Press
to select [Unmark as fav.].
Add a channel to a favourite list
1 When watching TV, switch to the channel
you want to add to a favourite list (see
‘Switch channels’ on page 9).
8 Press OK.
» The channel is removed from the
favourite list.
2 Press
to select a channel to add to
Use timers
a favourite list.
3 Press OPTIONS.
You can set timers to switch theTV to standby
at a specified time.
» The channel options menu appears.
4 Press
to select [Mark as favourite].
5 Press OK.
Automatically switch the TV to
standby (sleep timer)
Sleep timer switches the TV to standby after a
pre-defined period of time.
» The favourite lists appear.
6 Press
to select a favourite list to add
the channel to.
7 Press OK.
» The channel is added to the favourite
Tip
list.
• You can switch off your TV earlier or reset the
sleep timer during the countdown.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Press (Home).
Use TV lock
2 Press
to select [Setup] >
You can prevent your children from watching
certain programs or certain channels by locking
theTV controls.
[Features] > [Sleeptimer].
» The [Sleeptimer] menu appears.
3 Press
to set the sleep time.
» The sleeptimer can be up to 180
minutes in steps of five minutes. If
set to zero minutes, the sleeptimer is
switched off.
Set or change the TV lock code
1 Press (Home).
2 Press
to select [Setup] >
[Features] > [Set code].
4 Press OK to activate the sleeptimer.
» TheTV switches to standby after the
pre-defined period of time.
3 Press to enter the code setup.
4 Enter your code using the Numeric
buttons.
Automatically switch the TV on (on
5 Re-enter the same code in the new
dialogue box for confirmation.
» If the code is set successfully, the
dialogue box will disappear. However, if
the code cannot be set, a new dialogue
box will prompt you to re-enter the
code.
timer)
You can switch on the TV from standby to a
specific channel at a specified time.
1 Press (Home).
2 Press
to select [Setup] >
[Features] > [On timer].
6 If you want to change the code, select
3 Press to enter the [On timer] menu.
[Setup] > [Features] > [Change code].
4 Press
to select [Activate] and set
7 Enter your current code using the
a frequency - [Daily], [Once], or [Off].
Numeric buttons.
» If the code is validated, a new dialogue
box will prompt you to enter your
new code.
5 Press OK to confirm.
6 Press
to select [Time] and set the
starting time.
8 Enter the new code using the Numeric
7 Press [Done] to confirm.
buttons.
8 Press
to select [Programme no.]
» A message appears prompting you
to enter the new code again for
confirmation.
and set the channel.
9 Press OK to confirm.
10 Press (Home) to exit.
Tip
Tip
• If you forget your code, enter ‘8888’ to
override any existing codes.
• Select [On timer] > [Activate] > [Off] to
disable [On timer].
• When [On timer] is [Off], only [Activate] can
be selected.
• Set the TV clock before activating [On
timer]feature.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Lock or unlock the TV
Lock the TV to prevent access to all channels
and connected devices.
Use the TV clock
You can display a clock on theTV screen.
1 Press (Home).
Set the TV clock
2 Press
to select [Setup] >
[Features] > [TV lock].
1 Press (Home).
3 Press to enter the [TV lock].
» A screen appears prompting you to
enter a code.
2 Select [Setup] > [Features] > [Clock]
» The [Clock] menu appears.
3 Press
or Numeric buttons to
4 Enter your code using Numeric buttons.
enter time.
5 Press
to select [Lock] or [Unlock].
4 Press [Done] to confirm.
6 Press OK.
5 Press (Home)to exit.
» All channels and connected devices are
locked or unlocked.
7 Press (Home) to exit.
Use Scenea
Note
Scenea transforms yourTV into a personalised
photo frame.With Scenea enabled, you can
display a single picture or a slideshow of
pictures on yourTV — perfect for parties or
other social gatherings.
• If you select [Lock], you have to enter your
code every time you turn on your TV.
Lock or unlock one or more channels
Note
1 When watching TV, press OK to display
• Use Eco mode to save energy when the
Scenea wallpaper or a slideshow is displayed
on your TV (see ‘Use Eco mode with Scenea
wallpaper’ on page 18).
the channel grid.
2 Press
to select a channel to lock
or unlock.
• Scenea wallpaper is not available in shop mode
(see ‘Change TV preferences’ on page 20) or
MHEG mode (UK only).
3 Press OPTIONS.
4 Press
to select [Lock channel] or
[Unlock channel] .
5 For each selection, press OK to lock or
Display a single picture with Scenea
1 While watching TV, press SCENEA.
» The default Scenea picture is displayed
on yourTV.
unlock the channel.
Note
• Restart the TV for the change to take effect.
2 Press any key except (Standby-On) or
PICTURE to return to normal TV
viewing.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalize the Scenea picture
Use sleeptimer with Scenea wallpaper
By default, your TV displays the Scenea picture or
slideshow for 120 minutes before entering standby
mode. If sleeptimer is enabled, the Scenea picture
or slideshow is displayed for the duration of the
sleeptimer (see ‘Use timers’ on page 15).
1 While the TV is on, connect the USB
storage device containing your pictures
(JPEG format only) to the USB connector
at the side of your TV.
» The home menu appears. If the home
menu does not appear, press (Home).
Use Eco mode with Scenea wallpaper
Using Eco mode with Scenea saves energy by
lowering the TV brightness when a Scenea
picture or a slideshow is displayed.
2 Select [Browse USB], then press OK.
» The USB content browser appears.
3 Press
to navigate to the picture of
your choice.
1 While a Scenea picture or slideshow is
4 Press SCENEA.
displayed, press
PICTURE.
» Your picture is stored as the default
Scenea picture in yourTV.
» The [Eco mode] menu appears.
2 Press
to select [On].
3 Press OK.
5 Disconnect the USB storage device. The
device can be disconnected safely while
the TV is on.
» Eco mode with Scenea is enabled.
6 Follow the instructions to display your
personalised Scenea picture (see ‘Display
a single picture with Scenea’ on page 17).
Watch TV in dual view
You can use the DualView feature to display the
TV channels and the input from a device with
VGA or DVI connector (such as a computer or a
satellite box) simultaneously on yourTV.
Note
• The file size of the picture must be less than
1 MB.
• If the TV is reset to factory settings, your
personalised Scenea picture is removed
from the TV. Repeat these instructions to
personalise the Scenea picture again.
1 Press (Home).
2 Press
to select [Setup] >
[Features] > [Dual View].
3 Press OK to activate [Dual View].
» The main screen displays the input
source from DVI orVGA.
Display a slideshow of pictures with
Scenea
» The auxiliary screen displays the last
1 While the TV is on, connect the USB
storage device containing your pictures
(JPEG format only) to the USB connector
at the side of your TV.
viewedTV channel.
4 Press (Home) to exit dual view.
Note
» The home menu appears.
• [Dual View] is available only when the TV is
connected to a device, such as a PC, via a VGA
or DVI connection.
2 Press SCENEA.
» All pictures in your USB storage device are
displayed in a slideshow, starting from the
default Scenea picture stored in yourTV.
• Connections via DVI or VGA require an
additional audio cable (see ‘Connect a
computer’ on page 30).
• When in Dual view mode, press
+/- to
3 Press any key except (Standby-On)
or PICTURE to return to normal TV
viewing.
adjust volume in the main screen and press P
+/- or Numeric buttons to switch between
the TV channels in the auxiliary screen.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
View photos and play music
Tip
from a USB storage device
• When in full screen mode, press
between photos.
to move
Caution
• Philips is not responsible if the USB storage
device is not supported, nor is it responsible
for damage or loss of data from the device.
View a slide show of your photos
1 When a full screen image of a photo is
displayed, press OK or
.
Use the USB connector to view photos or
listen to music stored on a USB storage device.
» A slide show begins from the selected
image.
1 Turn on the TV.
2 Press:
2 Connect the USB device to the USB port
•
OK or
to pause the slide show.
on the side of your TV.
» The icon appears.
» The home menu appears.
•
•
Press
or
to move between
images.
Press BACK or to stop the slide
show.
Add new device
Browse USB
Watch TV
Setup
Change slide show settings
1 When viewing a slide show, press
OPTIONS.
» The slide show options menu appears.
2 Press
to select one of the following.
[Start/Stop slide.]Starts or stops a
slide show.
3 Press
to select [Browse USB].
4 Press OK to confirm.
•
•
•
» The USB thumbnail browser appears.
[Slideshow trans.]Sets the transition
from one picture to the next.
[Slideshow freq.]Sets the amount of
time that a picture is shown.
[Rotate image]Rotates a picture.
[Show info]Displays the picture
name, date, size and next picture in
the slide show.
Tip
• Press GUIDE to switch between thumbnail
•
•
and file browsing views.
View photos
3 Press OK to confirm your setting.
1 In the USB content browser, select
[Picture] and press to enter.
Note
2 Press GUIDE to switch between
• [Rotate image] and [Show info] appear only
thumbnail and file browsing views.
when you press OK or
slideshow.
to pause the
3 Press
to select a photo or a photo
album.
4 Press OK to view the selected photo in
full screen mode.
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Listen to music
Change TV preferences
1 In the USB thumbnail browser view,
1 Press (Home).
select [MUSIC] and press to enter.
2 Select [Setup] > [Installation] >
2 Press GUIDE to switch between
[Preferences].
thumbnail and file browsing views.
3 Press OK or to enter [Preferences].
3 Press
to select music or a music
•
•
•
[Location]Optimises TV settings for
your location - home or shop.
[Volume bar]Displays the volume
bar when you adjust the volume.
[EasyLink]Enables one-touch play
and one-touch standby between
EasyLink-compliant devices.
album.
4 Press OK to play the selected music.
Music settings
When listening to music, press OPTIONS
to access one of the following music settings.
•
[Pixel Plus Link]Overrides the
settings of connected devices and
uses the settings of the TV. (Available
only when [EasyLink] > [On] is
selected).
•
[Repeat]
•
•
•
[Play once]
[Repeat]
[Shuf]e]
•
[Show info]
•
•
[Colour] Sets the colour television
standard used in your area. Select
one of the following: [SECAM],
[NTSC], [AUTO] or [PAL].
[E-sticker]For shop mode only. Sets
the location of the e-sticker.
Disconnect a USB storage device
Caution
• Follow this procedure to avoid damage to your
USB storage device.
4 Press
to select your preference.
5 Press OK.
1 Press
BACK to exit the USB browser.
6 Press (Home) to exit.
2 Wait for five seconds before you
disconnect the USB storage device.
Access decoder channel
Update the TV software
You can map channels provided through a
decoder or descrambler to yourTV channel
selection. In this way, you can select these
channels by using the RC of yourTV.The
decoder or a descrambler must be connected
to EXT1.
Philips continuously tries to improve its
products and we recommend that you update
theTV software when updates are available.
Check the current software version
Set decoder channel
Map channels from a decoder or descrambler
1 Press (Home).
2 Press
to select [Setup] >
1 Press (Home).
[Software update] > [Current software].
» TheTV displays the current software
information.
2 Select [Setup] > [Installation] >
[Decoder].
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press to enter [Decoder].
4 Press to enter [Channel].
5 Press
to select channel number to
map to the decoder/descrambler channel.
6 Press OK.
7 Press
to select and enter [Status].
to select the connector used
8 Press
by the decoder/descrambler ([None] or
[EXT 1]).
9 Press OK.
10 Press (Home) to exit.
Note
• Select [None] if you do not want to map to
the decoder/descrambler channel.
Start a TV demo
1 Press DEMO on the remote control.
2 Press
to select a demo and press OK
to view it.
3 Press DEMO to exit.
Reset the TV to factory
settings
You can restore the default picture and sound
settings of yourTV.The channel installation
settings remain the same.
1 Press (Home).
2 Select [Setup] > [Installation] > [Factory
settings].
3 Press OK or to enter the [Factory
settings] menu.
» [Reset] is highlighted.
4 Press OK to reset to factory settings.
5 Press (Home) to exit.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2 Install Channels
Select your country for proper channel
installation.
6 Install channels
The first time you set up yourTV, you are
prompted to select a menu language and to
installTV and digital radio channels (if available).
This chapter provides instructions on how to
re-install and fine tune channels.
1 Press (Home).
2 Press
to select [Setup] >
[Installation] > [Channel install.] >
[Channel assistant].
Channel assistant
Analogue: Manual
Menu language
Channel install.
Preferences
Picture
Sound
Automatically install channels
Decoder
Features
This section describes how to search and store
channels automatically.
Factory setting
Current software
Installation
Software update
Step 1 Select your menu language
3 Press
to select your country and then
Note
to go to the next step.
• Skip this step if your language settings are
correct.
Select your country
Austria
Belgium
1 Press (Home).
Croatia
2 Press
to select [Setup] >
Czech Republic
Denmark
Finland
[Installation] > [Language] > [Menu
language].
France
3 Press to enter [Menu language].
Germany
4 Press
to select a language setting and
then OK to confirm.
4 Select [Start] and press OK to re-install
English
channels.
Menu language
Channel install.
Preferences
Picture
Česky
Sound
Start automatic installation. This takes a few minutes.
Start?
Български
Decoder
Dansk
Features
Installation
Factory setting
Current software
Deutsch
Ελληνικά
» As the system searches for channels,
you have the option to [Stop] the
process.
Español
Français
Software update
5 To stop searching, select [Stop] and press
5 Press (Home) to exit.
OK.
» A dialogue box appears asking
you if you really want to [Stop] or
[Continue] with the process.
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Select your system
6 Press
to select [Stop] or [Continue].
7 Press OK to confirm your choice.
Note
8 When done, press (Home) to exit.
• Skip this step if your system settings are
correct.
Manually install channels
1 Press (Home).
2 Press
to select [Setup] >
This section describes how to search and store
analogueTV channels manually.
[Installation] > [Channel install.] >
[Analogue: Manual].
» The [Analogue: Manual] menu appears.
1 Press (Home).
2 Press
to select [Setup] >
3 Press
to select and enter
[Installation] > [Channel install.] >
[Analogue: Manual].
[System].
4 Press
to select your country or
» The [Analogue: Manual] menu appears.
region.
Channel assistant
Menu language
Picture
5 Press OK to confirm.
Analogue: Manual
Channel install.
Preferences
6 Press (Home) to exit.
Sound
Decoder
Features
Search and store new TV channels
Factory setting
Current software
1 Press (Home).
Installation
Software update
2 Press
to select [Setup] >
[Installation] > [Channel install.] >
[Analogue: Manual].
» The [Analogue: Manual] menu appears.
3 Press
to select the item you want to
adjust.
3 Press
to select and enter [Search].
4 Press Numeric buttons to manually enter
•
•
•
•
•
•
•
[System]
[Search]
the three-digit frequency.
[Channel number]
[Fine-tune]
5 Press OK to begin search.
» If a channel is unavailable at the
selected frequency, the system searches
for the next available channel.
[Store cur. chan.]
[Store new channel]
[Skip channel]
6 Press
BACK when the new channel is
found.
7 Press
to select [Store new channel]
to store the new channel under a new
channel number.
8 Press to enter [Store new channel].
9 Press OK to store the new channel.
10 Press (Home) to exit.
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Change the channel number
Skip channels
1 Press (Home).
1 Press (Home).
2 Press
to select [Setup] >
2 Press
to select [Setup] >
[Installation] > [Channel install.] >
[Analogue: Manual].
» The [Analogue: Manual] menu appears.
[Installation] > [Channel install.] >
[Analogue: Manual].
» The [Analogue: Manual] menu appears.
3 Press
to select and enter
3 Press
to select and enter [Skip
[Channel number].
channel].
» The screen displays the channel that
4 Press
to select [Yes] and press OK to
you are watching.
skip current channel.
» The selected channel is skipped when
you press P +/- on your remote
control or view the channel grid.
4 Press
to change the channel number.
5 Press OK to confirm.
6 Press
to select [Store new channel]
5 Press (Home) to exit.
to store channel number.
7 Press to enter [Store new channel].
8 Press OK to store the new channel.
9 Press (Home) to exit.
Note
• You can restore a skipped channel to your
channel listing.
Fine-tune analogue channels
1 Press (Home).
Rename channels
2 Press
to select [Setup] >
[Installation] > [Channel install.] >
[Analogue: Manual].
» The [Analogue: Manual] menu appears.
You can rename channels.The name appears
when you select the channel.
1 When watching TV, press OK to display
the channel grid .
3 Press
to select and enter [Fine-
tune].
2 Select the channel you want to rename.
4 Press
to adjust frequency.
3 Press OPTIONS.
» The channel options menu appears.
5 Press OK to confirm.
6 Press
to select [Store cur. chan.] to
4 Press
to select and enter [Rename
store channel number.
chan.].
» A text input box appears.
7 Press to enter [Store cur. chan.].
8 Press OK to store the current channel.
9 Press (Home) to exit.
5 Press
to select characters.
6 Press OK to confirm each of the
characters.
Tip
• Rename channels - a channel name can be up
to six characters long.
• Press [Aa] to change an uppercase letter to a
lowercase letter and vice versa.
24 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Reorder channels
After you install channels, you can rearrange the
order in which they appear.
1 When watching TV, press OK to display
the channel grid.
2 Press OPTIONS.
» The channel options menu appears.
3 Press
to select [Reorder], then press
OK.
4 Select the channel to rearrange, then
press OK.
» The selected channel is highlighted.
5 Press
to move the highlighted
channel to the desired location, then
press OK.
6 Press OPTIONS.
» [Done reordering] appears on the
screen.
7 Press OK to confirm.
8 Press
BACK to exit the channel grid.
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Connect devices
PC IN(AUDIO)
This section describes how to connect devices
with different connectors. Examples are
provided in the Quick Start.
VGA
Note
• You can use different types of connectors to
connect a device to your TV.
VGA
b HDMI 1
Back connectors for 19-22
Digital audio and video input from high-
definition digital devices such as Blu-ray
players.
inch TV
SERV.U
c SERV. U
For use by service personnel only.
d SPDIF OUT
Digital audio output to home theatres
and other digital audio systems.
a PC IN (VGA and AUDIO IN)
Audio and video input from a computer.
e TV ANTENNA
Signal input from an antenna, cable or
satellite.
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
h EXT 2 (Y Pb Pr and AUDIO L/R)
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.
TV ANTENNA
f AV OUT (VIDEO OUT and AUDIO
OUT L/R)
Audio and video output to analogue devices
such as another TV or a recording device.
AUDIO
IN
Back connectors for 26 inch
and larger TV
g EXT 1 (RGB and CVBS)
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.
HDMI 2/ DVI
VGA
SERV.U
a PC IN (VGA and AUDIO IN)
Audio and video input from a computer.
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
PC IN(AUDIO)
VGA
e EXT 1 (RGB and CVBS) / CVBS (EXT 2)
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles. EXT2 supports
S-Video.
VGA
b HDMI 1/2
EXT1/ EXT2
(RGB/CVBS)/ (CVBS)
Digital audio and video input from high-
definition digital devices such as Blu-ray
players.
/ HDMI 2
c TV ANTENNA
Signal input from an antenna, cable or
satellite.
f EXT 3 (Y Pb Pr and AUDIO L/R)
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.
TV ANTENNA
d SPDIF OUT
Digital audio output to home theatres
and other digital audio systems.
28 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
b
Stereo audio output to headphones or
earphones.
c AUDIO L/R
Audio input from analogue devices
connected to VIDEO.
g SERV. U
For use by service personnel only.
Side connectors
d VIDEO
Composite video input from analogue
devices such as VCRs.
1
2
3
4
5
6
e S-VIDEO
S-Video (side) to be used with Audio L/R
connectors for camcorder, game console,
etc. When you use the S-Video (side) for
video signals, do not use the Composite
video (side) input for video signals.
a USB
Data input from USB storage devices.
EN 29
Download from Www.Somanuals.com. All Manuals Search And Download.
•
DVI-HDMI cable
For TV of size 22 inch and smaller
PC IN(AUDIO)
For TV of size 26 inch and larger
AUDIO IN :
LEFT / RIGHT
HDMI 1/ DVI
HDMI 2/ DVI
VGA
DVI
f HDMI
Digital audio and video input from high-
definition digital devices such as Blu-ray
players.
/ HDMI 2
•
HDMI cable and HDMI-DVI adaptor
For TV of size 22 inch and smaller
PC IN(AUDIO)
For TV of size 26 inch and larger
AUDIO IN :
LEFT / RIGHT
HDMI 1/ DVI
HDMI 2/ DVI
VGA
DVI
/ HDMI 2
Connect a computer
Before you connect a computer to the TV
•
VGA cable
•
•
Set the screen refresh rate on your
computer to 60Hz.
For TV of size 22 inch and smaller
PC IN(AUDIO)
For TV of size 26 inch and larger
Select a supported screen resolution on
your computer.
AUDIO IN :
LEFT / RIGHT
HDMI 1/ DVI
HDMI 2/ DVI
VGA
Connect a computer with one of the
following connectors:
Note
• Connections via DVI or VGA require an
additional audio cable.
VGA
•
HDMI cable
VGA
30 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Enable or disable EasyLink
Use Philips EasyLink
Your TV supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
Note
• Do not enable Philips EasyLink if you do not
intend to use it.
1 Press (Home).
Note
2 Press
to select [Setup] >
[Installation] > [Preferences] > [EasyLink].
• The EasyLink-compliant device must be
switched on and selected as the source.
• Philips does not guarantee 100%
3 Select [On] or [Off].
interoperability with all HDMI CEC devices.
Use one-touch play
1 After enabling EasyLink, press play on
EasyLink features
Your TV supports the following Easylink
features :
your device.
» TheTV automatically switches to the
correct source.
•
One-touch play:When you connect
your TV to devices that support one-
touch play, you can control your TV and
the devices with one remote control.
For example, when you press ‘Play’ on
your DVD remote control, your TV
automatically switches to the correct
channel to show the DVD content.
One-touch standby: When you connect
your TV to devices that support standby,
you can use your TV remote control to
put your TV and all connected HDMI
devices in standby mode.
System audio control (One-touch audio):
When you connect your TV to HDMI
CEC compliant amplifier (such as, a
Home theatre system or an AV receiver),
your TV can switch automatically to play
audio from the connected amplifier. To
use one-touch audio, you must map the
audio input from the connected amplifier
to your TV. You can use the remote
control of the connected amplifier or
your TV to adjust the volume.
Use one-touch standby
1 Press and hold Standby on the TV’s or
device’s remote control for at least three
seconds.
» TheTV and all connected HDMI
devices switch to standby.
•
•
System audio control
When enabled, this feature automatically
turns off TV speakers when content from
an EasyLink-compliant home theatre system
is played. Audio is played only from the
amplifier’s speakers such as home theatre
system’s speakers or AV receiver.
Note
• Follow the instructions in the user manual
of the connected devices to map the audio
input to your TV correctly (see ‘Connect an
amplifier’ on page 32).
•
•
Remote control pass-through (RC key
forwarding):RC key forwarding allows
you to control EasyLink-compliant devices
using your TV remote control.
Pixel Plus Link:Overrides the settings of
connected devices and uses the settings
of the TV.
1 Enable one-touch play and one-touch
standby between your Easylink compliant
devices by following the instructions
in the previous section (see ‘Enable or
disable EasyLink’ on page 31).
EN 31
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Press (Home).
HDMI Device
3 Press
to select [Setup] > [Sound]
> [TV speakers] > [Auto EasyLink].
» TheTV speakers are turned off
automatically when content from an
Easylink compliant system is detected.
HDMI
HDMI
4 Press
to select [Setup] > [Sound]
> [TV speakers] > [On] to disable
system audio control and enable the TV
speakers.
Amplifier
Note
Note
• If you select [TV speakers] > [Off], the TV
• You must map the audio input from the
connected device to your TV in order to use
this feature.
speakers are muted.
Connect an ampli\er
Enable remote control pass-through
An amplifier such as Home theatre System or
AV receiver can be used to play audio from an
Easylink compliant device connected to your
TV.
An amplifier can be connected in the following
different ways :
1 Enable one-touch play and one-touch
standby between easylink compliant
devices by following the instructions
in the previous section (see ‘Enable or
disable EasyLink’ on page 31).
•
An amplifier with only one HDMI output.
Audio can be played by the amplifier
from the device or TV.
2 Press (Home).
3 Press
to select a device with
HDMI connector from your home menu.
4 Press OPTIONS.
HDMI Device
5 Press
to select [Enable RC pass] and
HDMI
press OK.
» RC pass-through is enabled on the
2
selected device.
1
HDMI
SPDIF OUT /
Analogue Audio
Note
SPDIF OUT/
Analogue audio
• Easylink compliant device must be connected
to the TV via HDMI connector.
Amplifier
•
Amplifier with one HDMI input and
several HDMI outputs. Audio can
be played by the amplifier via HDMI
connector from your device.
32 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
[Dev. root menu]Accesses the root
menu of the CD/DVD/game disc.
[Device setup menu]Accesses the
main menu of the connected device
such as DVD player, HDD recorder,
or game console.
[Dev. content menu]Accesses the
content menu of the CD/DVD/game
disc.
Disable remote control pass-through
1 Enable one-touch play and one-touch
standby between easylink compliant
devices by following the instructions
in the previous section (see ‘Enable or
disable EasyLink’ on page 31).
•
2 Press (Home).
3 Press
to select a device with
HDMI connector from your home menu.
4 Press OK to enter or activate your
selection.
4 Press OPTIONS.
5 Press
to select [Disable RC pass] and
press OK.
Use a Kensington lock
» RC pass-through is disabled on the
selected device.
There is a Kensington security slot at the back
of theTV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
Note
• Easylink compliant device must be connected
to the TV via HDMI connector.
Access menu after enabling RC pass-
through
1 Enable remote control pass-through by
following the instructions in the previous
section.
2 Press
to select a device that has
been enabled to support RC pass-
through and press OK to enter.
3 Press OPTIONS to access one of the
following menus for TV or the active
device connected to the TV:
•
[TV setup]Accesses menus to
change picture, sound and other
settings.
•
•
[Clock]Displays the clock on the TV
screen.
[TV speakers]Turns TV speakers
on or off. Setting TV speakers
to automatic mode turns off the
speakers when content from an
EasyLink-compliant home theatre
system is detected.
EN 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia
8 Product
information
•
Supported storage device: USB (Only
FAT or FAT 32 USB storage devices are
supported)
•
Supported multimedia file formats:
Product information is subject to change
without notice. For detailed product
•
•
Images: JPEG
Audio: MP3
Note
• Multimedia file names must not exceed 32
characters.
Supported display resolutions
Computer formats
•
Resolution - refresh rate:
•
•
•
•
•
•
•
•
•
•
640 x 480 - 60Hz
800 x 600 - 60Hz
1024 x 768 - 60Hz
1280 x 720 - 60Hz
1280 x 768 - 60Hz
1280 x 1024 - 60 Hz
1360 x 768 - 60Hz
1440 x 900 - 60Hz
1680 x 1050 - 60Hz
Via HDMI/DVI input
Tuner/Reception/
Transmission
•
•
Aerial input: 75ohm coaxial (IEC75)
TV system: PAL I, B/G, D/K; SECAM B/G,
D/K, L/L’
•
•
Video playback: NTSC, SECAM, PAL
Tuner Bands: Hyperband, S-channel, UHF,
VHF
Video formats
•
Resolution - refresh rate:
•
•
•
•
•
•
•
480i - 60Hz
Remote control
480p - 60Hz
576i - 50Hz
576p - 50Hz
720p - 50Hz, 60Hz
1080i - 50Hz, 60Hz
1080p - 24Hz, 25Hz, 30Hz, 50Hz,
60Hz.
•
•
Type: PF02E09B
Batteries: 2 x AAA (LR03 type)
Power
•
•
•
Mains power: 220-240V, 50Hz
Standby power: <0.15W
Ambient temperature: 5 to 40 degrees
Celsius
34 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported TV mounts
To mount theTV, purchase a PhilipsTV mount
or aVESA-compatibleTV mount.To prevent
damage to cables and connectors, be sure to
leave a clearance of at least 2.2 inches or 5.5cm
from the back of theTV.
Warning
• Follow all instructions provided with the TV
mount. Koninklijke Philips Electronics N.V.
bears no responsibility for improper TV
mounting that results in accident, injury or
damage.
TV screen
Required
Required
mounting bolts
4 x M4
4 x M4
6 x M4
4 x M6
4 x M6
size (inches) pitch (mm)
19
22
26
32
42
75 x 75
100 x 100
200 x 100
200 x 200
400 x 400
EN 35
Download from Www.Somanuals.com. All Manuals Search And Download.
TV channel issues
9 Troubleshooting
Previously installed channels do not appear in
the channel list:
This section describes commonly encountered
issues and accompanying solutions.
•
Check that the correct channel list is
selected.
General TV issues
Picture issues
The TV does not switch on:
The TV is on, but there is no picture:
•
Disconnect the power cable from the
power outlet. Wait for one minute then
reconnect it.
Check that the power cable is securely
connected.
•
Check that the antenna is properly
connected to the TV.
Check that the correct device is selected
as the TV source.
•
•
There is sound but no picture:
•
The remote control is not working properly:
•
Check that the picture settings are
correctly set.
Check that the remote control batteries
are correctly inserted according to the
+/- orientation.
There is poor TV reception from an antenna
connection:
•
•
•
•
Replace the remote control batteries if
they are flat or weak.
Clean the remote control and TV sensor
lens.
Check that the antenna is properly
connected to the TV.
Loudspeakers, unearthed audio devices,
neon lights, high buildings and other large
objects can influence reception quality.
If possible, try to improve the reception
quality by changing the antenna direction
or moving devices away from the TV.
If reception on only one channel is poor,
fine tune this channel.
The standby light on the TV blinks red:
•
Disconnect the power cable from the
power outlet. Wait until the TV cools
down before reconnecting the power
cable. If the blinking reoccurs, contact
Philips Consumer Care.
•
You forgot the code to unlock the TV lock
feature
There is poor picture quality from connected
devices:
•
•
Enter ‘8888’.
Check that the devices are connected
properly.
Check that the picture settings are
correctly set.
The TV menu is in the wrong language.
•
Change the TV menu to your preferred
language.
•
When turning the TV on/off/to standby, you
The TV did not save your picture settings:
•
hear a creaking sound from the TV chassis:
Check that the TV location is set to the
home setting. This mode offers you the
flexibility to change and save settings.
•
No action is required. The creaking sound
is normal expansion and contraction of
the TV as it cools down and warms up.
This does not impact performance.
The picture does not \t the screen; it is too
big or too small:
•
Try using a different picture format.
The picture position is incorrect:
•
Picture signals from some devices may
not fit the screen correctly. Check the
signal output of the device.
36 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound issues
Computer connection issues
There is a picture but sound quality is poor:
The computer display on the TV is not stable:
•
Check that your PC uses the supported
resolution and refresh rate.
Note
•
Set the TV picture format to unscaled.
• If no audio signal is detected, the TV
automatically switches the audio output off
— this does not indicate malfunction.
Contact us
•
Check that all cables are properly
connected.
Check that the volume is not set to 0.
Check that the sound is not muted.
If you cannot resolve your problem, refer to
com/support.
If the problem remains unresolved, contact
Philips Consumer Care in your country as
listed in the Addendum.
•
•
There is a picture but the sound quality is
poor:
•
Check that the sound settings are
correctly set.
There is a picture but sound comes from one
speaker only:
•
Warning
• Do not attempt to repair the product yourself.
This may cause severe injury, irreparable
damage to your product or void your
warranty.
Verify that sound balance is set to the
centre.
HDMI connection issues
Note
There are problems with HDMI devices:
• Make a note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.
•
Note that HDCP (High-bandwidth Digital
Content Protection) support can delay
the time taken for a TV to display content
from a HDMI device.
•
If the TV does not recognize the HDMI
device and no picture is displayed, try
switching the source from one device to
another and back again.
•
•
If there are intermittent sound
disruptions, check that output settings
from the HDMI device are correct.
If you use an HDMI-to-DVI adapter
or HDMI to DVI cable, check that an
additional audio cable is connected to
AUDIO L/R or AUDIO IN (mini-jack
only).
EN 37
Download from Www.Somanuals.com. All Manuals Search And Download.
digital services
teletext
10 Index
10, 14
display
resolution
Dual view
34
18
A
antenna
E
EasyLink
B
disable
31
31
bracket for wall mount
35
enable
one-touch play
one-touch standby
system audio control
Electronic Programme Guide
environmental care
31
C
31
31, 31
channel list
favourite
troubleshooting
Channels
favourite list
install
14
36
5
14
F
factory settings
favourites list
create list
view list
21
automatic
manual
22
23
24
25
24
14
14
rename
reorder
tune
child lock
TV lock
H
17
17
HDMI
Clock
troubleshooting
home mode
37
20
computer
technical specifications
Connections
HDMI
34
I
troubleshooting
overview
PC
37
26
install channels
automatic
manual
22
23
37, 30
34
technical specifications
troubleshooting
connectors
overview
37
K
Kensington lock
33
20
26
L
D
location
lock
demo
21
devices
Kensington
TV lock
33
17
add to home menu
connect
11
26
10
watch
Digital channel
38 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
M
T
menu
Table of Pages
technical speci\cations
teletext
14
34
main menu
teletext
11
14
12
MPEG artifact reduction
Multimedia
features
14
14
14
14
menu
subpages
technical specifications
music
34
20
Table of Pages
timer
USB
on timer
Sleep timer
standby
15, 16
15
O
15
36
on timer
16, 15
31
troubleshooting
TV
One-touch play
One-touch standby
31
adjust volume
as PC monitor
menu
10
30
11
30
20
5
P
pc connection
preferences
screen care
software
PC
pc connection
picture format
change
30
20
9
12
36
11
16
34
standby
troubleshooting
picture settings
PIN code
power
switch channels
switch off
9
9
switch on
9
troubleshooting
tuner technical specifications
wall mount
TV lock
36
34
35
R
reception
36
remote control
batteries
lock channels
lock connected devices
PIN code
17
17
16
34, 5
7
overview
RC pass-through
technical specifications
31
34
U
USB
S
listen to music
view photos
20
19
settings
picture
11, 12
13, 11
11
20
12, 13
sound
V
settings assistant
shop mode
smart settings
software
version
video format
technical specifications
volume
34
adjust
10
13
13
10
20
13, 13
automatic levelling
delta
sound settings
mute
EN 39
Download from Www.Somanuals.com. All Manuals Search And Download.
W
wallpaper
17
40 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
|