Register your product and get support at
AD7000W/37
EN User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
get the very most from your purchase.
Register online at www.philips.com/welcome to ensure:
Congratulations on your purchase,
and welcome to the “family!”
This “bolt of lightning” indicates unin-
sulated material within your unit may
cause an electrical shock. For the safety of
everyone in your household, please do not
remove product covering.
Dear PHILIPS product owner:
The “exclamation point” calls atten-
tion to features for which you should
read the enclosed literature closely to pre-
vent operating and maintenance problems.
WARNING: To reduce the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects
filled with liquids, such as vases, should not
be placed on this apparatus.
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot, fully
insert.
ATTENTION: Pour éviter les choc élec-
triques, introduire la lame la plus large de la
fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.
P. S. To get the most from your PHILIPS purchase, be
sure to register online at:
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1
Important
Safety
Notice
6
6
7
2
Your Entertainment System
Introduction
What’s in the box
What else you need
Overview of the main unit
Get started to use AirPlay
10
10
10
10
11
11
3
4
Prepare
Connect power
Turn AD7000W on
12
12
12
Connect to your homeWi-Fi network for
AirPlay
13
Scenario 1: Connect to a WPS router
Scenario 2: Connect to a non-WPS router
13
14
5
Play
20
Stream audio from your iTunes music library to
AD7000W
20
Control play
Use advanced sound settings
Play/charge your iPod/iPhone/iPad through USB
21
21
socket
22
Play from an external device
22
6
Update firmware
Download the update file
Update from the configuration page
23
23
23
7
8
Product information
Specifications
25
25
Troubleshooting
26
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
h Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
1 Important
Safety
i Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other.A grounding
type plug has two blades and a third
grounding prong.The wide blade or the
third prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
Know these safety symbols
This ‘bolt of lightning’ indicates uninsulated
material within your unit may cause an electric
shock. For the safety of everyone in your
household, please do not remove product
covering.
The ‘exclamation mark’ calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
j Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
WARNING:To reduce the risk of fire or electric
shock, this apparatus should not be exposed to
rain or moisture and objects filled with liquids,
such as vases, should not be placed on this
apparatus.
k Only use attachments/accessories
specified by the manufacturer.
CAUTION:To prevent electric shock, fully
insert the plug. (For regions with polarized
plugs:To prevent electric shock, match wide
blade to wide slot.)
l Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
Important Safety Instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
m Unplug this apparatus during lightning
storms or when unused for long periods
of time.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
n Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
Notice
Notice of compliance
Any changes or modifications made to this
device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the equipment.
Specifications are subject to change without
notice.WOOX reserves the right to change
products at any time without being obliged to
adjust earlier supplies accordingly.
o Battery usage CAUTION –To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
FCC & RSS compliance statement
•
•
•
Install all batteries correctly, + and - as
marked on the unit.
Remove batteries when the unit is not
used for a long time.
Perchlorate Material-special handling
hazardouswaste/perchlorate.
This device complies with Part 15 of the FCC
Rules and Industry Canada licence-exempt
RSS standard(s). Operation is subject to the
following two conditions:
a This device may not cause harmful
interference, and
p Apparatus shall not be exposed to
dripping or splashing, keep it away from
direct sunlight,naked flames or heat.
b This device must accept any interference
received, including interference that may
cause undesired operation.
FCC Radiation Exposure Statement
Warning
This equipment complies with FCC’s and IC’s
RF radiation exposure limits set forth for an
uncontrolled environment.The antenna(s)
used for this transmitter must be installed and
operated to provide a separation distance of
at least 20 cm from all persons and must not
be collocated or operating in conjunction with
any other antenna or transmitter. Installers must
ensure that 20cm separation distance will be
maintained between the device (excluding its
handset) and users.
• Never remove the casing of this apparatus.
• Never lubricate any part of this apparatus.
• Never place this apparatus on other electrical
equipment.
• Keep this apparatus away from direct sunlight, naked
flames or heat.
• Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect this apparatus from
the power.
Risk of overheating! Never install this apparatus
in a confined space.Always leave a space of
at least four inches around this apparatus for
ventilation. Ensure curtains or other objects
never cover the ventilation slots on this
apparatus.
FCC rules
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
residential installation.This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation.
negative consequences on the environment and
human health.
additional information on a recycling center in
your area.
Information about the use of batteries:
If this equipment does cause harmful
Caution
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
• Risk of leakage: Only use the specified type of batteries.
Do not mix new and used batteries. Do not mix
different brands of batteries. Observe correct polarity.
Remove batteries from products that are not in use for
a longer period of time. Store batteries in a dry place.
• Risk of injury:Wear gloves when handling leaking
batteries. Keep batteries out of reach of children and
pets.
• Risk of explosion: Do not short circuit batteries. Do
not expose batteries to excessive heat. Do not throw
batteries into the fire. Do not damage or disassemble
batteries. Do not recharge non-rechargeable batteries.
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
•
•
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
Environmental information
Canada:
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
This Class B digital apparatus complies with
Canadian ICES-003.
Disposal of your old product and
batteries
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
Philips and the Philips’ Shield Emblem are
registered trademarks of Koninklijke Philips N.V.
and are used by WOOX Innovations Limited
under license from Koninklijke Philips N.V.
Your product contains batteries, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries.The correct
disposal of batteries helps prevent potentially
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
“Made for iPod,”“Made for iPhone,” and “Made
for iPad” mean that an electronic accessory
has been designed to connect specifically to
iPod, iPhone, or iPad, respectively, and has
been certified by the developer to meet
Apple performance standards.Apple is not
responsible for the operation of this device
or its compliance with safety and regulatory
standards. Please note that the use of this
accessory with iPod, iPhone, or iPad may affect
wireless performance.
AirPlay, iPod, and iPhone are trademarks of
Apple Inc., registered in the U.S. and other
countries. iPad is a trademark of Apple Inc.
Class II equipment symbol:
CLASS II apparatus with double insulation, and
no protective earth provided.
Note
• The type plate is located on the bottom of the
apparatus.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
2 Your
about more Philips AirPlay-enabled devices.
Entertainment
System
With AD7000W, you can also:
•
•
•
charge your iPod/iPhone/iPad through
the USB socket with an Apple USB
cable (not supplied).
play your iTunes music library on your
iPod/iPhone/iPad through the USB
socket directly while charging.
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
play music from other audio devices
through the MP3-LINK socket.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
bottom of the apparatus.Write the numbers
here:
What’s in the box
Model No. __________________________
Serial No. ___________________________
Check and identify the contents of your
package:
•
Main unit (with a built-in Wi-Fi
module)
•
•
•
•
1 x AC power adapter
1 x MP3 link cable
User manual (in CD-ROM)
Quick start guide
Introduction
Apple AirPlay technology enables you to play
your iTunes music library, hosted on a Mac, PC,
iPhone, iPod touch, or iPad on any AirPlay-
enabled device (for example, your AD7000W)
connected to the Wi-Fi network.
What else you need
With an AirPlay-enabled device (for example,
your AD7000W), you can:
To stream audio wirelessly by AirPlay, you need:
•
•
A Wi-Fi certified router
•
stream audio from your iTunes music
library to any room in your house
choose which AirPlay-enabled devices
you want to play music on (if you
have more than one such devices in
your house)
A host for your iTunes music library,
for example, an iPod touch/iPhone/
iPad installed with iOS 4.3 (or later)
or a Wi-Fi enabled PC/Mac installed
with iTunes 10 (or later)
•
•
stream audio to multiple AirPlay-
enabled devices at the same time
(from the iTunes music library on your
PC/Mac only)
Your AD7000W should be connected to the
same local network as your iTunes host device
through the Wi-Fi router.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
e MP3-LINK
Connect an external audio player
through the supplied MP3 link cable.
List of compatible iTunes host devices
for AirPlay
•
In terms of AirPlay,AD7000W is compatible
with:
f DC IN
•
Connect the power adaptor.
•
a Wi-Fi enabled PC/Mac installed with
iTunes 10 (or later); and
the following iPod/iPhone/iPad models
installed with iOS 4.3 (or later):
g USB
•
Connect an iPod/iPhone/iPad through
an Apple USB cable (not supplied).
•
•
•
•
•
•
iPad 2
iPad
iPhone 4
iPhone 3GS
iPod touch (2nd, 3rd, and 4th
generation)
Get started to use AirPlay
To get started with AirPlay, you need to:
1 Upgrade your iPod touch/iPhone/iPad to
the latest iOS version (iOS 4.3 or later).
•
Or install the latest version of iTunes
(iTunes 10 or later) on your PC/Mac.
Overview of the main unit
a
Wi-Fi network (see ‘Connect to your
home Wi-Fi network for AirPlay’ on page
13).
b
c
4 Make sure that your iPod touch/iPhone/
iPad or PC/Mac are also connected to the
same Wi-Fi network.
d
e
f g
a Power indicator
b +/-
•
Adjust volume.
c
•
•
Turn the unit on/off.
(Press and hold) reset the unit.
d WI-FI SETUP button/indicator
•
Connect the unit to a Wi-Fi network.
•
Show the Wi-Fi connection status of
the unit.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Prepare
Turn AD7000W on
1 Press on the back to turn the unit on.
2 Wait for successful boot-up of the unit.
Always follow the instructions in this chapter in
sequence.
» The boot-up takes about 35 seconds.
» During boot-up, the Wi-Fi SETUP
indicator on the back of the unit blinks
green quickly.
Connect power
» After boot-up, if no Wi-Fi connection
has been set up for AD7000W, the
Wi-Fi SETUP indicator starts to blink
green slowly.
Caution
• Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
• Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
•
•
To switch the unit to Eco standby mode,
press again.
To switch the unit on from Eco standby
mode, press again.
• Before you connect the AC adaptor, make sure that you
have completed all the other connections.
Tip
• If the unit stays idle for more than 30 minutes, the unit
turns off automatically.You can change this setting on
the Philips Fidelio application available on the App
Store. It is a free application offered by Philips.
•
Connect the AC power cord to
•
the DC IN socket on the back of the
unit.
•
the wall power socket.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Make sure that your Wi-Fi router is
4 Connect to
your homeWi-
Fi network for
AirPlay
powered on and working properly.
3 Identify the type of your Wi-Fi router (see
the user manual of your Wi-Fi router for
details).
Scenario 1: Connect to a
WPS router
Note
1 Press the WPS button on your home Wi-Fi
router.
To connect AD7000W to your existing home
Wi-Fi network, you need to apply your home
Wi-Fi settings to AD7000W.
WPS
You can do this in two ways (depending on
which type of Wi-Fi router you use):
•
Button Connection) (see ‘Scenario 1:
Connect to a WPS router’ on page
13)
•
not support WPS (see ‘Scenario 2:
Connect to a non-WPS router’ on
2 Shortly after step 1, press Wi-Fi SETUP on
the back of AD7000W.
» The Wi-Fi SETUP indicator blinks red,
yellow and green alternately.
Once connected successfully,AD7000W will
remember your home Wi-Fi settings.Then
you can enjoy AirPlay whenever AD7000W is
powered on and connected to your home Wi-
Fi network automatically.
» Within 2 minutes, the WI-FI SETUP
indicator stops blinking and stays green,
and the unit beeps.
» AD7000W is connected to your home
Before connection of AD7000W to you home
Wi-Fi network, check the points below.
Wi-Fi network successfully.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Follow the sequence below for connection of
AD7000W to a non-WPS Wi-Fi router.
AD7000W Wi-Fi setup (see ‘Collect
settings of your home Wi-Fi router’ on
mode (see ‘Switch AD7000W to Assisted
» A new Wi-Fi network created by
AD7000W will appear, with the
network name (SSID) of Philips Fidelio
AirPlay.
(see ‘Connect your Wi-Fi enabled device to
the newly created Wi-Fi network’ on page
15).
Tip
• For some Wi-Fi routers, you may need to hold the
WPS button for Wi-Fi connection or enable the WPS
PBC function from the router configuration pages. See
the user manuals of the specific routers for details.
• If the Wi-Fi SETUP indicator on AD7000W blinks
yellow, it means that the Wi-Fi connection has failed.
Please wait for 2 minutes and try again. If the problem
(see ‘Scenario 2: Connect to a non-WPS router’ on
enabled device (see ‘Open the built-in web
• If the Wi-Fi connection fails again, press and hold on
the back of AD7000W to reset it, and then try again.
wrote on paper at step 1 (see ‘Change the
internal Wi-Fi settings of AD7000W’ on
Scenario 2: Connect to a
non-WPS router
‘Restore your Wi-Fi enabled device back to
your existing home Wi-Fi setting’ on page
19).
Note
• You can also follow the procedures below to connect
AD7000W to a WPS router manually.
Collect settings of your homeWi-Fi
router
To connect AD7000W to a Wi-Fi router
manually, you need access to AD7000W’s
built-in configuration web page for change of
its internal Wi-Fi settings.To do so, you need a
Wi-Fi enabled device with an Internet browser
for temporary Wi-Fi connection to AD7000W.
The Wi-Fi enabled device can be an iPod touch/
iPhone/iPad or a Wi-Fi enabled PC/Mac.
Note
• Always consult the user manual of your home Wi-Fi
router for detailed instructions.
1 Connect your Wi-Fi enabled device to
your existing home Wi-Fi network.
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
» A new Wi-Fi network created by
AD7000W will appear, with the
network name (SSID) of Philips Fidelio
AirPlay.
2 Launch the Internet browser (for example,
Apple Safari or Microsoft Internet
Explorer) on your Wi-Fi enabled device.
3 Open the configuration page of your
» It may take up to 45 seconds for
successful creation of this new Wi-Fi
network.
home Wi-Fi router.
4 Find the Wi-Fi settings tab and write down
the following information on paper:
A Network name (SSID)
B Wi-Fi security mode (usually WEP,
Note
WPA or WPA2 if enabled)
C Wi-Fi password (if Wi-Fi security is
• After you finish manual Wi-Fi setup for AD7000W,
the new Wi-Fi network created by AD7000W will
disappear.
• If you fail to enter Assisted Wi-Fi Setup mode, power
off AD7000W and power on it, then try again after
successful boot-up.
• Make sure that there are no other Philips AirPlay-
enabled devices in Assisted Wi-Fi Setup mode at the
same time. Multiple Wi-Fi networks created this way
may interfere with each other.
enabled)
D DHCP mode (enabled or disabled)
E Static IP address settings (if DHCP
mode is disabled)
Switch AD7000W to AssistedWi-Fi
Setup mode
Note
Connect yourWi-Fi enabled device to
the newly createdWi-Fi network
The new Wi-Fi network created by AD7000W
only allows access of one Wi-Fi enabled device.
To avoid interference from any other Wi-Fi
devices, you are recommended to temporarily
disable the Wi-Fi function on your other Wi-Fi
devices.
Option 1: Use your iPod touch/iPhone/iPad
1 Select Settings -> Wi-Fi on your iPod
touch/iPhone/iPad.
•
Press and hold Wi-Fi SETUP on the back
of AD7000W for more than 5 seconds.
» The Wi-Fi SETUP indicator blinks
green and yellow alternately.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Wait until successful Wi-Fi connection on
your iPod touch/iPhone/iPad.
»
is displayed at the upper left corner
of your iPod touch/iPhone/iPad.
Tip
• If Philips Fidelio AirPlay is not in the list, try to scan the
available Wi-Fi networks again.
Use yourWi-Fi enabled PC/Mac
Note
• See the user manual of your PC/Mac for how to
connect your PC/Mac to a Wi-Fi network.
• During Wi-Fi network connection, do not connect any
network cable to your PC/Mac.
1 Open the Wi-Fi setup tool or control
panel on your PC/Mac.
2 Scan the available Wi-Fi networks.
2 Select Philips Fidelio AirPlay from the list
of available networks.
Philips Fidelio AirPlay
3 Select Philips Fidelio AirPlay from the list
of available networks.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
192.168.1.1
4 Wait until successful Wi-Fi connection on
your PC/Mac.
If you use Safari on yourWi-Fi enabled PC/
Mac, you can also select ‘Philips_Fidelio XXX’
from the Bonjour pull-down list to enter the
AD7000W configuration web page directly.
1 Click -> Preferences.
» The Bookmarks menu is displayed.
Tip
• If Philips Fidelio AirPlay is not in the list, try to scan the
available Wi-Fi networks again.
Open the built-in web page of
AD7000W
1 Launch Apple Safari browser or any other
Internet browser on your Wi-Fi enabled
device.
2 Type in 192.168.1.1 at the browser
address bar and confirm.
» The AD7000W configuration
web page is displayed.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Tick Include Bonjour for Bookmarks bar.
192.168.1.1
3 Select ‘Philips_Fidelio XXX’ from the
Bonjour pull-down list shown at the
bookmarks bar.
» The AD7000W configuration web
page is displayed.
•
Follow the on-screen instructions to
change and confirm the internal Wi-Fi
settings of AD7000W.
» After a while, the indicator on the back
of AD7000W stops blinking and stays
green, and the unit beeps.
» AD7000W is connected to your existing
homeWi-Fi network successfully.
Note
Change the internalWi-Fi settings of
AD7000W
• If the WI-FI SETUP indicator on AD7000W does not
stay green steadily, it means that the Wi-Fi connection
has failed. Please power off both your Wi-Fi router
and AD7000W and then power on them again to see
whether AD7000W can be connected to your home
Wi-Fi network. If the problem remains, try the above
procedures again.
• After you finish the above changes or power-off and
power-on of AD7000W, the new Wi-Fi network
created by AD7000W will disappear.
On the AD7000W configuration web page,
you can change the internal Wi-Fi settings of
AD7000W for connection of AD7000W to
your existing home Wi-Fi network.
Note
• Make sure that the settings on the configuration web
page match your home Wi-Fi network settings that you
wrote on paper.
Tip
• If you like, you can change the name of your AD7000W
in Advanced settings -> AirPlay Device Name on the
AD7000W configuration web page.This is helpful when
you have multiple Philips AirPlay-enabled devices in
your house and you need to distinguish between them.
• If you want to enter the network name (SSID) manually
(for example, if you want to hide your SSID), go to
Advanced settings -> CONFIGURE MANUALLY on
the AD7000W configuration web page.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Restore yourWi-Fi enabled device
back to your existing homeWi-Fi
setting
Note
• Make sure that the settings at steps 2 to 3 below match
your home Wi-Fi network settings you wrote on paper.
1 Select Settings ->Wi-Fi on your iPod
touch/iPhone/iPad.
•
Or open the list of available Wi-Fi
networks on your PC/Mac.
3 Enter the network key if required.
4 Wait until successful Wi-Fi connection to
your home Wi-Fi network.
2 Select your network name (SSID) from the
list of available wireless networks.
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Play
Stream audio from your
iTunes music library to
AD7000W
Note
• Make sure that your iTunes host device is connected
to the same Wi-Fi network as AD7000W.Your iTunes
device can be an iPod touch/iPhone/iPad installed with
iOS 4.3 (or later) or a Wi-Fi enabled PC/Mac installed
with iTunes 10 (or later).
4 Select a media file and start play.
» After a while, you will hear music from
AD7000W.
Stream from your iPod touch/iPhone/
iPad
1 Launch the iPod application on your iPod
touch/iPhone/iPad.
2 Tap on the AirPlay icon.
Note
• If you fail to hear music after successful setup, do one of
the following on your iPod touch/iPhone/iPad:
• (1) Disconnect and then re-connect to the same Wi-Fi
router again;
• (2) Close all applications running at the background;
• (3) Power off and then power on your iPod touch/
iPhone/iPad again.
3 Select Philips_Fidelio XXXX (or user
customized name) from the AirPlay list.
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
Stream from your PC/Mac
1 Launch iTunes 10 (or a later version) on
• When you stream audio from your iTunes music library
on a PC/Mac, you can select more than one AirPlay-
enabled devices (if available) at step 3 to stream music
to all of them at the same time.
your PC/Mac.
2 Click the AirPlay icon on the window.
• If you are using an earlier version of iTunes, the AirPlay
icon may be instead of
.
Control play
You can select different play options from either
your iTunes host device or AD7000W.
Note
• Make sure that you have successfully streamed audio
3 Select Philips_Fidelio_AirPlay XXXX (or
user customized name) from the AirPlay
list.
from your iTunes music library to AD7000W.
•
•
To pause or resume play, press
To adjust volume, press +/- repeatedly.
.
Tip
• If you are streaming music from a PC/Mac, to control
music play from AD7000W, remember to tick Allow
iTunes audio control from remote speakers in Edit ->
Preferences -> Devices on iTunes.
Use advanced sound settings
If your iTunes host device is an iPod touch/
iPhone/iPad:
4 Select a media file and start play.
» After a while, you will hear music from
AD7000W.
For advanced sound settings and additional
features, you can use your iPod touch/iPhone/
iPad to download the Philips Fidelio application
from Apple App Store. It is a free application
from Philips.
If your iTunes host device is aWi-Fi enabled
PC/Mac:
For advanced sound settings, you can use the
equalizer available on iTunes directly (View ->
Show Equalizer).
Tip
• See the iTunes help documentation for more details.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
•
•
•
•
iPhone 3GS
iPhone 3G
iPhone
iPod classic
iPod 5G
iPod 4G
Play/charge your iPod/iPhone/
iPad through USB socket
Note
• The USB socket is only compatible with iPod/iPhone/
iPad.
iPod nano (2nd, 3rd, 4th, 5th, and 6th
generation)
•
iPod touch (1st, 2nd, 3rd, and 4th
generation)
You can play or charge your iPod/iPhone/iPad
through the USB socket with an Apple USB
cable (not supplied).
If you have stopped audio streaming by AirPlay,
after successful USB connection, the unit
switches to the USB source automatically.
Play from an external device
You can also listen to an external audio player
through the unit.
If you have stopped both audio streaming
by AirPlay and play through the USB socket,
the unit switches to the MP3 link source
automatically.
•
Connect an Apple USB cable (not
supplied) to:
•
the USB
socket on the back of
AD7000W.
•
the dock connector on your iPod/
iPhone/iPad.
Compatible iPod/iPhone/iPad
•
Connect the supplied MP3 link cable to:
•
the DC IN socket on the back of the
unit.
the headphone jack on an external
audio player.
The USB socket supports play and charge of
the following iPod, iPhone, and iPad models.
•
•
•
•
iPad 2
iPad
iPhone 4
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
6 Update
firmware
• To use an Internet browser other than Apple Safari
on your PC/Mac, remember to go to the Wi-Fi router
configuration page and write down the IP address of
your AD7000W. See the user manual of your Wi-Fi
router for how to find the IP addresses of devices
connected to the Wi-Fi router.
Note
• You can only update the firmware from a PC/Mac.
» It takes about 35 seconds for the unit
to boot up. During boot-up, the WI-FI
SETUP indicator on the back of the
unit blinks green quickly.
Download the update file
» After boot-up, you can hear a beep
and the WI-FI SETUP indicator
turns to green steadily.AD7000W is
connected to the last configured Wi-Fi
network automatically.
XXXX
2 Make sure that AD7000W and your PC/
Mac are connected to the same Wi-Fi
router.
3 Open Apple Safari on your PC/Mac, then
select ‘Philips_Fidelio XXX’ from the
Bonjour pull-down list.
•
Or open any other Internet browser
on your PC/Mac, then type in the IP
address of AD7000W (available on
the Wi-Fi router configuration page)
at the address bar.
XXXX. zip
» The AD7000W configuration
web page is displayed.
support.
2 Enter the model number to find the latest
firmware upgrade file available.
3
Save the upgrade file to your hard drive.
Update from the
configuration page
Warning
• Always connect your AD7000W to AC power for
firmware upgrade. Never power off your AD7000W
during firmware upgrade.
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Follow the on-screen instructions to
complete the firmware update.
Note
• In case the firmware update fails, you can try the above
procedures again.
• After successful firmware update, if there is any
problem with the Wi-Fi connection, press and hold
on AD7000W for more than 5 seconds to reset the
device, and then try to set up the Wi-Fi network for
AD7000W again (see ‘Connect to your home Wi-Fi
24 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
General information
AC power
7 Product
information
Input: 100 - 240
V~, 50/60 Hz
1A/1.2 A
Output: 12V
3.0 A
Note
Operation Power
Consumption
Power Consumption in
Standby Mode
25 W
• Product information is subject to change without prior
notice.
< 0.5 W
Dimensions
- Main Unit (L x W x H) 298 x 98 x
168 mm
Specifications
Weight
- With Packing
- Main Unit
2.02 kg
1.36 kg
Amplifier
Rated Output Power 2 X 5 W RMS
Frequency Response 63 Hz - 18 kHz, ±3 dB
Signal to Noise Ratio > 90 dB
MP3 Link
600 mV RMS 20 kohm
Speakers
Speaker Impedance
Speaker Driver
Sensitivity
8 ohm
66 mm full range
82 dB/m/W
Wireless
Wireless
standard
Wireless
security
Frequency
range
802.11b/g
WEP (64 or 128 bit),
WPA/WPA2 (8-63 characters)
2412 - 2462 MHz (CH1-
CH11) (for /79, /37, /55, /97)
2412 - 2472 MHz (CH1-
CH13) (for /12, /10, /05)
Yes
PBC (one
button push)
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
•
If your Wi-Fi router is Wi-Fi 802.11n
certified, make sure to enable the
802.11b/g mode.AD7000W does not
support connection to routers with
802.11n only.
8 Troubleshooting
Warning
•
•
This device does not support the WPS-
PIN method.
• Never remove the casing of this apparatus.
If your Wi-Fi router supports WPS and the
WPS-PBC method but fails to connect to
method (see ‘Scenario 2: Connect to a
Enable SSID broadcast on the Wi-Fi router.
Keep away from potential sources of
interference which may affect Wi-Fi signal,
such as microwave ovens.
If you fail to use your PC for Wi-Fi network
setup, check whether your PC is using a
Wi-Fi network.You cannot use Ethernet
connection for AirPlay network setup.
Make sure that the SSID name of your
home router consists of alphanumeric
characters, with no space or special
characters like %/#/* inserted.
If you choose to rename the AirPlay device
‘Philips_Fidelio XXXX’ in the setting
menu, do not use special characters or
symbols.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome).When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
•
•
•
•
•
•
No power
•
Make sure that the AC power plug of the
device is connected properly.
Make sure that there is power at the AC
outlet.
•
No sound
•
•
Adjust the volume.
Check the Wi-Fi network connection.
‘Connect to your home Wi-Fi network for
For some new types of Wi-Fi routers, a
network name (SSID) may be created
automatically when you use WPS for
connection.Always change the default
network name (SSID) to a simple one that
consists of alphanumerical characters, and
also change the Wi-Fi security mode to
secure your network.
No response from the unit
•
Press and hold on AD7000W for more
than 5 seconds to reset the device.Then
again (see ‘Connect to your home Wi-Fi
Occasional breaking of AirPlay music
streaming
•
Disconnect and reconnect the AC power
plug, and then switch on the device again.
Do one or all of the following:
Wi-Fi network connection failed
•
•
•
Move AD7000W closer to your Wi-Fi
router.
Remove any obstacles between AD7000W
and your Wi-Fi router.
Avoid using Wi-Fi channel which is
overlapped by the nearby Wi-Fi network.
•
Check if your Wi-Fi router is Wi-Fi
802.11b/g certified.This device is only
compatible with Wi-Fi 802.11b/g certified
routers.
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Check if your network speed is fast enough
(in cases where multiple devices share the
same router, the AirPlay performance may
be affected).Turn off the other devices
connected to your home router.
•
•
Enable the Quality of Service (QoS)
option (if available on the Wi-Fi router).
Turn off other Wi-Fi routers.
No AirPlay icon on my iTunes host device
•
Make sure that AD7000W is already
connected to your home Wi-Fi network.
Before you open iTunes, make sure that
you have enabled Bonjour service in
your PC.Take Windows XP for example:
to enable the service, you can click
Start->Control Panel, and double-click
AdministrativeTools-> Services->Bonjour
Service, then click Start followed by OK
on the pop-up menu.
•
•
If the problem remains, try to restart
AD7000W.
AirPlay connection failed with Mac or PC
•
Temporarily disable the firewall and
security software to see whether it blocks
the ports that AirPlay uses to stream
content. See the help documentation of
your firewall and security software on how
to unblock the ports used by AirPlay.
When you use iPodTouch/iPhone/iPad/
Mac/PC for AirPlay, if the music play breaks
or stops, try to restart your iPodTouch/
iPhone/iPad, iTunes or AD7000W.
Video streaming or FTP downloads may
overload your router and therefore may
cause interruptions during AirPlay music
play.Try to reduce the load of your router.
•
•
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
2013 © WOOX Innovations Limited.
All rights reserved.
This product was brought to the market by WOOX Innovations
Limited or one of its affiliates, further referred to in this
document as WOOX Innovations, and is the manufacturer of
the product. P&F is the warrantor in relation to the product with
which this booklet was packaged. Philips and the Philips Shield
Emblem are registered trademarks of Koninklijke Philips N.V.
DA7000W_37_UM_EN_V2.0
Download from Www.Somanuals.com. All Manuals Search And Download.
|