DC570
Docking Entertainment System
Register your product and get support at
Philips vous remercie de
Thank you for choosing Philips.
Gracias por escoger Philips
votre confiance.
Need help fast?
Besoin d'une aide
rapide?
Le Guide rapide de début et Manuel de
l'utilisateur regorgent d'astuces destinées à
simplifier l'utilisation de votre produit Philips.
Toutefois, si vous ne parvenez pas à résoudre
votre probléme, vous pouvez accéder à
notre aide en ligne à l'adresse
Necesita ayuda
inmediata?
Lea primero la Guía rápida del comienzo
o el Manual del usuario, en donde encontrará
consejos que le ayudarán a disfrutar
plenamente de su producto Philips.
Si después de leerlo aún necesita ayuda,
consulte nuestro servicio de
Read your Quick Start Guide and/or
User Manual first for quick tips
that make using your Philips product
more enjoyable.
If you have read your instructions
and still need assistance,
you may access our online help at
asistencia en línea en
or call
ou formez le
o llame al teléfono
1-888-PHILIPS (744-5477)
while with your product.
(and Model / Serial number)
1-800-661-6162 (Francophone)
1-888-PHILIPS (744-5477) (English speaking)
Veillez à avoir votre produit à
portée de main.
1-888-PHILIPS (744-5477)
y tenga a mano el producto.
(y número de model / serial)
(et model / serial nombre)
Download from Www.Somanuals.com. All Manuals Search And Download.
DOCKINGENTERTAINMENT SYSTEM DC570
1
7
8
2
3
4
POWER
DBB
SOURCE
9
0
DSC
PRESET
VOLUME
+
+
5
!
AUX
FM
6
@
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
POWER
TUNER
9
0
!
+
TUNING
TUNING
@
#
$
4
5
6
USB
MENU
TIMER
AUX
SHU FFLE
REPEAT
PROG
SET TIME
DSC
ALBUM/
PRESET
VOL
7
8
%
^
DBB
SLEEP
MUTE
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Clean only with dry cloth.
Where the MAINS plug or an appliance
coupler is used as the disconnet device,
the disconnet device shall remain
readily operable.
9
materials
Class II equipment symbol
This symbol indicates that the unit has
a double insulation system
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures :
– Relocate the receiving antenna.
– Increase the separation between the equipment and receiver
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT !
modifications not authorized by the manufacturer may void users authority to operate this device.
Remarque : Cet équipement a été testé et a été certifié conforme aux limites imposées pour un
appareil numérique de Classe B, conformément à la partie 15 des réglements FCC. Ces limites sont
définies aux fins d'assurer une protection raisonnable contre les interférences nuisibles dans une
installation résidentielle. Cet équipement génère, utilise et émet des fréquences radio qui, en cas d'une
mauvaise installation ou d'une utilisation non-conforme aux instructions de ce manuel d'utilisation
peuvent causer des interférences nuisibles aux communications radio. Il n'y a toutefois aucune garantie
que des interférences nuisibles ne se produiront pas dans une installation donnée. Si cet équipement
cause des interférences nuisibles avec votre poste radio ou de télévision, ce que vous pouvez déterminer
en éteignant et en rallumant votre équipement, il est conseillé à l'utilisateur d'essayer de pallier à ces
interférences nuisibles en prenant l'une ou l'autre des mesures suivantes:
– Changez la position de l'antenne de réception.
– Augmentez la séparation entre l'équipement et le récepteur.
– Branchez l'équipement sur une source d'alimentation différente de celle sur laquelle le récepteur est
branché.
– Consultez votre distributeur ou un technicien qualifié en la matière pour assistance.
IMPORTANTE !
las modificaciones no autorizadas por el fabricante pueden anular la autoridad de los usuarios para
utilizar este aparato.
Nota : Este aparato ha sido probado y cumple con los límites correspondientes a un aparato digital de Clase
.
B, según la parte 15 de las Normas FCC. Estos límites han sido diseñados para facilitar suficiente protección
frente a interferencias perjudiciales en una instalación residencial. Este aparato genera, utiliza y puede emitir
energía de frecuencias de radio y, si no se instala y utiliza según el manual de instrucciones, puede provocar
interferencias perjudiciales en las comunicaciones de radio. Sin embargo, no existe garantía de que las
interferencias no ocurrirán en una instalación particular. Si este aparato provoca interferencias perjudiciales en
la recepción de radio o television, que se puede identificar encendiendo y apagando el aparato,
recomendamos al usuario que intente solucionar las interferencias siguiendo una o más de las siguientes
medidas:
– Cambie la posición de la antena receptora.
– Aumente la separación entre el aparato y el receptor.
– Conecte el aparato a una toma de un circuito diferente al que está conectado el receptor.
– Consulte con el distribuidor o un técnico de radio/TV con experiencia para que le ayuden.
¡IMPORTANTE!
modificações não autorizadas pelo fabricante, podem causar danos na operação deste aparelho.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
English ------------------------------------------------ 8
Français -------------------------------------------- 25
Español --------------------------------------------- 44
CAUTION
Canada
Use of controls or adjustments or
performance of procedures other
than herein may result in hazardous
radiation exposure or other unsafe
operation.
English:
This digital apparatus does not exceed
the Class B limits for radio noise
emissions from digital apparatus as set
out in the Radio Interference
Regulations of the Canadian
Department of Communications.
ATTENTION
Franćais:
L'utilisation des commandes ou
réglages ou le non-respect des
procédures ci-incluses peuvent se
traduire par une exposition
dangereuse à l'irradiation.
Cet appareil numérique n'emet pas
de bruits radioélectriques dépassant
les limites applicables aux appareils
numériques de Class B prescrites dans
le Règlement sur le Brouillage
Radioélectrique édicté par le Ministère
des Communications du Canada.
ATENCIÓN
El uso de mando o ajustes o la
ejecucción de métodos que no sean
los aquí descritos puede ocasionar
peligro de exposición a radiación.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Using a non-USB device.................................... 18
Using a USB mass storage device ................... 18
General Information
Environmental Information ................................ 9
Supplied accessories ............................................ 9
Safety Information ................................................ 9
Clock/Timer/Sleep
Clock setting ....................................................... 20
Setting theAlarmTime...................................... 20
Stopping the alarm ...................................................20
Sleep timer setting ............................................. 20
Preparations
Rear connections ............................................... 10
Connecting a USB device or memory card ........11
Connecting other equipment to your system ...11
Before using the remote control .................... 11
Replacing the remote control battery........... 11
iPod Dock
Compatible iPod players ................................... 21
Selecting the correct dock adaptor ............... 21
Using the dock adaptors................................... 21
Playing an iPod portable player ....................... 21
Charging iPod battery using the dock ........... 21
Controls
Main unit .............................................................. 12
Remote Control ................................................. 13
Specifications ............................................ 22
Basic Functions
Switching the system on ................................... 14
Switching the system toEco Power standby
mode ..................................................................... 14
Switching the system to standby mode ........ 14
Power SavingAutomatic Standby.................... 14
Adjusting volume and sound............................ 14
Sound control ..................................................... 15
Troubleshooting ..................................... 23
USB playback functions
Different play modes: SHUFFLE and REPEAT ...
................................................................................ 16
Programming track numbers ........................... 16
Reviewing programmed tracks........................ 16
Changing programmed tracks ......................... 16
Erasing the program .......................................... 16
Radio Reception
Tuning to radio stations .................................... 17
Programming radio stations............................. 17
Automatic programming .........................................17
Manual programming ...............................................17
Tuning to preset radio stations ....................... 17
External Sources
8
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
Congratulations on your purchase and welcome
to Philips!
●
●
●
●
No objects filled with liquids, such as vases, shall
be placed on the apparatus.
To fully benefit from the support that Philips
welcome.
Install this unit near the AC outlet and where the
AC power plug can be reached easily.
The apparatus shall not be exposed to dripping
or splashing.
Environmental Information
When the system is switched to Standby
mode, it is still consuming some power.
To disconnect the system from the
power supply completely, remove the AC
power plug from the wall socket.
All unnecessary packaging has been omitted.We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Your system consists of materials which can be
recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Supplied accessories
– remote control (with battery)
– FM antenna
– 4 X iPod dock adaptors
– 3.5 mm line-in cable
Safety Information
●
Before operating the system, check that the
operating voltage indicated on the typeplate of
your system is identical with the voltage of your
local power supply. If not, please consult your
dealer.
●
●
Place the system on a flat, hard and stable
surface.
Place the system in a location with adequate
ventilation to prevent internal heat build-up in
your system. Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.
●
●
●
The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc.
Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
FM wire
antenna
Rear connections
B Antenna Connection
Connect the supplied FM antenna to the FM
terminal. Extend and position the FM antenna for
optimal reception.
The type plate is located at the rear of the
system.
A Power
Note:
●
Before connecting the power cord to the wall
outlet, ensure that all other connections have
been made.
– Position the FM antenna away from the speaker
wires to avoid electrical interference.
WARNING!
– For optimal performance, use only the
original power cord.
– Never make or change connections with
the power switched on.
C Optional connections
The optional equipment and connecting cords are
not supplied. Refer to the operating instructions
of the connected equipment for details.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Connecting a USB device
Before using the remote control
1 Pull out the plastic protective sheet.
By connecting a USB mass storage device
(including USB flash memory, USB flash players)
to the system, you can enjoy the device's stored
music through the powerful speakers of system.
2 Select the source you wish to control by
pressing one of the source select keys on the
remote control (for example USB,TUNER).
Insert the USB device's USB plug into the
socket on the set.
3 Then select the desired function (for example
…≈ ).
OR
for devices with USB cables:
1 Insert one plug of the USB cable (not supplied)
to the
socket on the set.
2 Insert the other plug of the USB cable to the
USB port of the USB device.
Connecting other equipment to your
system
Replacing the remote control
battery (lithium CR2025)
Use a line-in-cable to connect AUX IN to the
analogue audio out terminals of an external
equipment (TV,VCR, Laser Disc player, DVD
player or CD Recorder).
1 Press the slot on the battery compartment.
2 Pull out the battery compartment.
3 Replace a new battery and fully insert the
battery compartment back to the original
position.
1
CR2025
2
3
CAUTION!
– Remove battery if it is exhausted or will
not be used for a long time.
– Batteries contain chemical substances, so
they should be disposed of properly.
– Perchlorate Material-special handling
hazardouswaste/perchlorate.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Main unit
1 USB DIRECT
–
jack for the connecting an external USB mass
storage device and MP3/ WMA players.
2ÉÅ
–
(iPod/USB) starts or interrupts playback.
3S/ T
iPod/ USB .......... fast searches back and forward
within a track (press and hold).
................................. skips to the beginning of a
current/previous/next track.
CLOCK ............... adjusts the minutes for the clock/
alarm function.
TUNER ............... tunes to lower/ higher FM
frequency.
4VOLUME -/+
–
adjusts the volume level.
5Display screen
shows the status of the system.
6FM antenna
improves FM reception
7DOCK for iPod
–
–
–
cradle for docking adaptors used to dock your
iPod player for playback or recharging through
this system.
8 Power
–
switches on the system to the last sound source
played.
–
switches the system to standby mode.
9Source
to select the respective sound source: USB, iPod,
FM, or AUX.
0PRESET -/+
–
–
(USB) skips to the beginning of a previous/
subsequent album.
–
–
adjusts the hours for the clock/alarm function.
selects a preset radio station.
DBB
–
–
enhances the bass
DSC
selects different sound effects
!IR
–
remote sensor
@AUX
–
connect an auxiliary device here.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
@Timer
Remote Control
–
activates/deactivates alarm setting mode
–
turns alarm on/off
1iPod
selects the sound source for your iPod player.
2Power
#AUX
selects sound source for other audio equipment.
$PROG/SETTIME
–
–
–
switches the system to standby mode.
–
–
–
(TUNER) programs radio stations.
sets the clock function.
(USB) programs tracks.
3ÉÅ
–
(iPod/USB) starts or interrupts playback.
4Menu
%VOLUME -/+
adjusts the volume level.
^MUTE
interrupts and resumes sound production.
–
enters iPod menu
–
5USB
–
6 REPEAT/SHUFF
selects sound source for a USB audio player.
–
–
(USB) toggles track/album playback options e.g.
repeat or random order mode.
7ALBUM/PRESET3 / 4
–
–
–
–
(USB) skips to the beginning of a previous/
subsequent album.
selects a preset radio station.
DBB
enhances the bass
Notes for remote control:
– First select the source you wish to control
by pressing one of the source select keys on
the remote control (for example USB/AUX).
– Then select the desired function (for
example ÉÅ, S , T).
DSC
selects different sound effects
8 SLEEP
–
selects the sleeper time.
9TUNER
–
selects the sound source for FM radio.
0TUNING -/+
TUNER ............... tunes to lower/ higher FM
frequency.
CLOCK ............... adjusts the hour for the clock/
alarm function.
!S / T
iPod/USB.....fast searches back and forward within
a track (press and hold).
................................. skips to the beginning of a
current/previous/next track.
CLOCK ............... adjusts the minute for the clock/
alarm function.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Switching the system to Standby
mode
●
Press Power (or Power on the remote
control).
➜ The volume level (up to a maximum volume
of 12), last selected mode, source and tuner
presets will be retained in the system's memory.
POWER
TUNER
+
TUNING
TUNING
Power Saving Automatic Standby
As a power-saving feature, the system
automatically switches to standby 15 minutes
after a USB connected device has reached the
end of the last track and no control is operated.
Adjusting volume and sound
USB
MENU
TIMER
AUX
1 Press VOLUME -/+ to decrease or increase the
volume.
SHU FFLE
REPEAT
PROG
SET TIME
➜ Display shows the volume levelVoL and a
number 0-32.
DSC
ALBUM/
PRESET
2 Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜ Playback will continue without sound and
MUTE appears.
VOL
DBB
SLEEP
MUTE
●
To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
Important!
Before you operate the system, complete
the preparation procedures.
Switching the system on
●
●
Press Power on the set.
➜ The system will switch to the last selected
source.
Press source on the set repeatedly or USB,
AUX, iPod or TUNER on the remote
control.
➜ The system will switch to the selected source.
Switching the system to Eco
Power Standby mode
●
●
Press and hold POWER (or POWER on the
remote) in the active mode.
➜ The system enters Eco power standby mode.
If the system is normal standby mode, press and
hold POWER on the front panel for 3 seconds
or more to switch to Eco power standby or vice
versa.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Sound Control
DBB and DSC sound features cannot be
activated at the same time.
DBB (Dynamic Bass Boost)
DBB enhances the bass response.
iPod/AUX
●
●
Press ALBUM/PRESET 4 on the remote or
PRESET - on the pane to enable/disable DBB
feature.
USB/TUNER
Press and hold ALBUM/PRESET 4 on the
remote or PRESET - on the panel for more
than 2 seconds to enable/disable DBB feature.
DSC (Digital Sound Control)
DSC provides a different type of preset sound
equalizer setting.
iPod/AUX
1 Press ALBUM/PRESET 3 or PRESET + on
the panel to enter DSC mode.
2 Press PRESET + repeatedly to select: CLASSIC,
JAZZ, POP or ROCK.
USB/TUNER
1 Press and hold ALBUM/PRESET 3 or
PRESET + on the panel for more than 2
seconds to enter DSC mode.
2 Press PRESET + repeatedly to select: CLASSIC,
JAZZ, POP or ROCK.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
USB playback functions
Programming track numbers
Program in the STOP position to select and
store up to 20 tracks in the memory.
1 Press PROG/SETTIME on the remote
control to enter the programming mode.
➜ Pr 01 appears and PROG flashes.
POWER
TUNER
2 Press S/T to select your desired track
+
TUNING
TUNING
number.
●
For tracks in a different album, press ALBUM/
PRESET 3/4 to select a desired album
number.
3 Press PROG/SETTIME to confirm the track
number to be stored.
4 Repeat steps 2-3 to select and store all desired
tracks.
USB
MENU
TIMER
AUX
➜ FULLappears if you attempt to program
more than 20 tracks.
SHU FFLE
REPEAT
PROG
SET TIME
5 To start playback of your program, press ÉÅ.
DSC
ALBUM/
PRESET
VOL
Reviewing programmed tracks
You can review or change the programmed
tracks.
DBB
SLEEP
MUTE
1 Press PROG/SETTIME repeatedly to review
each programmed track.
Changing programmed tracks
1 Press PROG/SETTIME repeatedly to your
desired programmed track.
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback.The REPEAT
modes can also be combined with PROGRAM.
2 Press S/T to select your desired track
number.
●
For tracks in a different album, press ALBUM/
PRESET 3/4 to select a desired album
number.
1 To select your play mode, press REPEAT/
SHUFF before or during playback until the
display shows the desired function.
➜ If onE appears the current track will play
repeatedly.
3 Press PROG/SETTIME to confirm the track
number to be stored.
➜ If ALb appears the current album will play
repeatedly.
➜ If ALL appears all tracks will be played
repeatedly.
Erasing programmed tracks
1 To erase your program, press and hold PROG/
SETTIME for more than 2 seconds.
➜ CLR appears.
➜ SHUFF appears if shuffle playback is
activated and disappears if deactivated.
2 To return to normal playback, press the
REPEAT/SHUFF until oFF displayed.
Note:
– The Repeat and Shuffle functions cannot be
combined.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Reception
Programming radio stations
You can store up to a total of 20 radio stations
in the memory.
Automatic programming
POWER
TUNER
Automatic programming will start at preset
number 1 and all your former presets will be
overridden.
+
TUNING
TUNING
●
Press PROG/SETTIME for more than 3
seconds to activate programming.
➜ All available stations are programmed.
Manual programming
USB
MENU
TIMER
AUX
1 Tune to your desired station (refer to “Tuning to
radio stations”).
SHU FFLE
REPEAT
PROG
SET TIME
2 Press PROG/SETTIME to activate
programming.
DSC
ALBUM/
PRESET
➜ PROG flashes in the display.
VOL
DBB
3 Press ALBUM/PRESET 3 / 4 to allocate a
number from 1 to 20 to this station.
SLEEP
MUTE
4 Press PROG/SETTIME again to confirm the
setting.
➜ PROG disappears, the preset number and
the frequency of the preset station are shown.
Tuning to radio stations
5 Repeat the above four steps to store other
stations.
1 Press TUNER to select the tuner source.
●
You can override a preset station by storing
another frequency in its place.
2 Hold TUNING -/+ (or S/T on the set)
and then release the button.
➜ The system will start searching for a radio
station with sufficient signal strength.
Tuning to preset radio stations
3 Repeat step 2 if necessary until you find the
●
Press ALBUM/PRESET 3/ 4until the
desired preset station is displayed.
desired station.
●
To tune to a weak station, press TUNING -/+
(or S/T on the set) briefly and repeatedly.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
External Sources
INFORMATION REGARDING USB
DIRECT:
1. Compatibility of the USB connection on this
system:
a)This product supports most USB Mass storage
devices (MSD) that are compliant to the USB
MSD standards.
POWER
DBB
SOURCE
DSC
PRESET
VO
L
UME
+
+
i) Most common Mass storage class devices are
flash drives, memory sticks, jump drives and etc.
ii) If you see a "Disc Drive" showing up on your
computer after you have plugged the mass
storage device into your computer, most likely it
is MSD compliant and it will work with this
system.
b) If your Mass storage device requires a battery/
power source please make sure you have a fresh
battery inserted or charge the USB device before
connecting to the system.
Using a non-USB device
1 Connect the audio out terminals of the external
equipment (TV,VCR, Laser Disc player, DVD
player or CD Recorder) to the AUX socket of
your system.
2 Press AUX to select external equipment.
2. Supported Music type:
a)This device only supports unprotected music
with the following file extension:
Note:
ñ Refer to the operating instructions of your
connected equipment for details.
.mp3
.wma
b) Music bought from on-line music stores are not
supported because they are secured by Digital
Rights Management protection (DRM).
c) File name extensions that end with the
following are not supported:
USB
MENU
AUX
.wav;.m4a; .m4p;mp4; .aac and etc.
3. Playback of audio files through the system's
speakers is not possible if you connect directly from
your computer to the USB socket.
Using a USB mass storage device
By connecting a USB mass storage device to the
system, you can enjoy the device's stored music
through the system's powerful speakers.
1 Check the USB device has been properly
connected. (See Installation: Connecting an
additional appliance).
2 Press USB once or more to select USB.
– no AUdIO appears if no audio file is found
in the USB device.
3 Refer to the Quick Start Guide or the Controls
page of this manual for basic playback features.
Playing a USB mass storage device
Compatible USB mass storage devices
You can use:
– USB flash memory (USB 2.0 or USB1.1)
– USB flash players (USB 2.0 or USB1.1)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
External Sources
Supported formats:
– USB or memory file format FAT12, FAT16,
FAT32 (sector size: 512-4096 bytes)
– MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
– WMA v9 or earlier
– Directory nesting up to a maximum of 8
levels
– Number of albums/ folders: maximum 99
– Number of tracks/titles: maximum 999
– ID3 tag v2.0 or later
– File name in Unicode UTF8 (maximum length:
128 bytes)
The system will not play or support the
following:
– Empty albums: an empty album is an album
that does not contain MP3/WMA files, and
will not be shown in the display.
– Non-supported file formats are skipped.This
means that e.g.:Word documents .doc or
MP3 files with extension .dlf are ignored and
will not be played.
– AAC, WAV, PCM audio files
– DRM protected WMA files
– WMA files in Lossless format.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timer/Sleep
1 Press TIMER for more than 3 seconds to enter
the alarm setting mode.
➜
appears.
➜ The alarm clock digits flash.
➜ "Err" appears briefly if you have not set the
clock time.
POWER
TUNER
2 Press TUNING +/- to set the hours.
+
TUNING
TUNING
3 Press S/T to set the minutes.
4 Press iPod, TUNER or USB to select the
sound source.
5 Press TIMER to confirm your alarm setting.
➜ The display returns to the clock time.
Notes:
TheTUNER mode is the default source if:
– Your USB device contains no MP3 orWMA files.
– You forgot to connect a USB device.
– You forgot to dock your iPod.
USB
MENU
TIMER
AUX
SHU FFLE
REPEAT
PROG
SET TIME
DSC
ALBUM/
PRESET
Stopping the alarm
VOL
DBB
●
To cancel the alarm, press TIMER in standby or
playback mode.
SLEEP
MUTE
➜
appears if activated, and disappears if
deactivated.
Sleep timer setting
The sleep timer enables the system to switch off
by itself after a set period of time.
1 Press SLEEP on the remote control repeatedly
to select a preset time.
Clock setting
The clock uses the 12-hour mode.
➜ The selections are as follows (time in
minutes):
120™ 90™ 60 ™ 30™ 15™OFF…
Important!
– To set clock in the Eco Power mode, press and
hold POWER on the set for 3 seconds or
more to switch to normal standby mode first
before proceeding with the procedures below.
➜SLEEP is displayed.
2 To review the remaining sleep time, press
1 In standby mode, press PROG/SETTIME for
more than two seconds.
SLEEP .
➜ The clock digits flash.
Note:
– If you press SLEEP again, this will change your
sleep time period to the next shorter preset option.
2 Press S/T to set the minutes.
3 Press TUNING -/+ to set the hours.
4 Press PROG/SETTIME to confirm the time.
To deactivate the sleep timer
●
Press SLEEP repeatedly until "0FF" is displayed,
or press Power.
Setting the timer
You can only set timer in standby mode.
Wake up to FM radio or music from your USB
device or iPod.The clock time needs to be set
first before the alarm clock can be used.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod Dock
Compatible iPod players
Playing an iPod portable player
●
●
The docking entertainment system is compatible
with all the existing Apple iPod models with 30-
pin connector.
1 Correctly dock your iPod portable player in the
cradle. Make sure the dock adaptor is
compatible.
●
Make sure that you have powered on your iPod
player before selecting iPod source.
Selecting the correct dock
adaptor
2 Press iPod on the remote control to select iPod
source.
Four adapters are included to fit different iPod
models including iPod touch (8GB, 16GB), iPod
classic (80GB, 160GB), iPod nano 3rd generation
(4GB, 8GB), iPod the 5th generation (30GB,
60GB, 80GB), iPod nano 2nd generation (2GB,
4GB, 8GB) and iPod nano 1st generation (1GB,
2GB, 4GB ).
➜ The iPod dock icon
appears.
3 Playback starts automatically. Playback functions
play, skip, fast search and, pause are possible using
the controls on this system and its remote
control.
Charging iPod battery using the
dock
Using the dock adaptors
●
Before plugging your player in the dock, snap the
suitable dock adapter into the dock to provide a
snug fit for the player to be docked
●
In iPod mode, directly dock your iPod portable
player on the cradle for charging.
Note:
–For the purpose of saving power, recharging of
your USB device and iPod is Not Supported when
the main set is in Eco Power mode.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
AMPLIFIER
– FM ................................................................................ 20dBf
Total harmonic distortion..................................... ≤ 1%
Frequency response
– FM .............................................................. 63 – 6000 Hz
Signal-to-noise-ratio
Output power ........................................................................
......................................................................50W+2 x 25W
Signal-to-noise ratio....................................... ≥ 70 dBA
Frequency response ...... 50 Hz – 20 KHz, 3 dB
Input sensitivity AUX ....................... 0.5V (max. 2V)
– FM ....................................................................... ≥ 50 dBA
SUBWOOFER
USB PLAYER
Frequency response ............................ 50 Hz – 1KHz
Impedance........................................................................ 8 Ω
Rated power ................................................................ 50W
USB ................................................................... 12Mb/s,V1.1
......................................... support MP3 and WMA files
Number of albums/folders .................maximum 99
Number of tracks/titles...................... maximum 999
TWEETER
Frequency response ..................... 160 Hz – 16 KHz
Impedance........................................................................ 4 Ω
Rated power ........................................................ 2 x 25W
GENERAL INFORMATION
AC Power ................................................... 120V / 60 Hz
Dimensions (w x h x d)300 x 300 x 1024 (mm)
Weight......................................................................... 10.1 kg
Standby power consumption ............................<7W
TUNER
FM wave range ................................... 87.5 – 108 MHz
Sensitivity at 75 Ω
Specifications are subject to change
without notice.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or Philips for
help.
Problem
Solution
Insert a a USB device.
“NO USb” is displayed.
✔
✔
If the signal is too weak, adjust the antenna or
connect an external antenna for better
reception.
Radio reception is poor.
✔
✔
Increase the distance between the unit and your
TV orVCR.
Position the FM antenna away from the speaker
wires to avoid electrical interference.
✔
Remove and reconnect the AC power plug and
switch on the system again.
The system does not react when buttons
are pressed.
✔
✔
Adjust the volume.
Disconnect the headphone.
Sound cannot be heard or is of poor
quality.
✔
✔
✔
Select the source (e.g.TUNER) before pressing
the function button (3/4, S/T).
Reduce the distance between the remote
control and the system.
Insert the battery with its polarities
(+/– signs) aligned as indicated.
The remote control does not function
properly.
✔
✔
Replace the battery.
Point the remote control directly toward
IR sensor on the front of the system.
✔
✔
Set the clock time correctly.
Switch on the alarm.
The alarm function is not working.
The Clock setting is erased.
✔
Power has been interrupted or the power cord
has been disconnected. Reset the clock.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
PHILIPS LIMITED WARRANTY
ONE (1) YEAR
WARRANTY COVERAGE:
PHILIPS warranty obligation is limited to the terms set forth
below.
Philips, or (d) if any Philips serial number has been removed or
defaced, or (e) product, accessories or consumables sold “AS IS”
without warranty of any kind by including refurbished Philips
product sold “AS IS” by some retailers.
WHO IS COVERED:
Philips warrants the product to the original purchaser or the per- This Limited Warranty does not cover:
son receiving the product as a gift against defects in materials and
workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
•
•
Shipping charges to return defective product to Philips.
Labor charges for installation or setup of the product, adjust-
ment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary con-
tent for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of Philips.
Damage or claims for products not being available for use, or
for lost data or lost software.
Damage from mishandled shipments or transit accidents when
returning product to Philips.
A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
A product used for commercial or institutional purposes
(including but not limited to rental purposes).
•
WHAT IS COVERED:
The Philips warranty covers new products if a defect in material
or workmanship occurs and a valid claim is received by Philips
within the Warranty Period. At its option, Philips will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or ser-
viceable used parts and is at least functionally equivalent or most
comparable to the original product in Philips current inventory,
or (3) refund the original purchase price of the product.
Philips warrants replacement products or parts provided under
this warranty against defects in materials and workmanship from
the date of the replacement or repair for ninety (90) days or for
the remaining portion of the original product’s warranty,
whichever provides longer coverage for you. When a product or
part is exchanged, any replacement item becomes your property
and the replaced item becomes Philips’ property. When a refund
is given, your product becomes Philips’ property.
•
•
•
•
•
•
Product lost in shipment and no signature verification receipt
can be provided.
Failure to operate per Owner’s Manual.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
TO OBTAIN ASSISTANCE IN THE U.S.A., PUERTO
RICO, OR U.S. VIRGIN ISLANDS…
Contact Philips Customer Care Center at:
1-888-PHILIPS (1-888-744-5477)
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
TO OBTAIN ASSISTANCE IN CANADA…
1-800-661-6162 (French Speaking)
1-888-PHILIPS (1-888-744-5477) - (English or Spanish
Speaking)
WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-
TATIONS:
This Limited Warranty applies only to the new products manu-
factured by or for Philips that can be identified by the trademark,
trade name, or logo affixed to it. This Limited Warranty does not REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
apply to any non-Philips hardware product or any software, even
if packaged or sold with the product. Non-Philips manufacturers,
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-
suppliers, or publishers may provide a separate warranty for their TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
own products packaged with the bundled product.
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Philips is not liable for any damage to or loss of any programs,
data, or other information stored on any media contained within
the product, or any non-Philips product or part not covered by
this warranty. Recovery or reinstallation of programs, data or
other information is not covered under this Limited Warranty.
Some states do not allow the exclusions or limitation of inciden-
tal or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-Philips product, (b)
to damage caused by service performed by anyone other than
Philips or Philips Authorized Service Location, (c) to a product or
a part that has been modified without the written permission of
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Philips, P.O. Box 671539, Marietta, GA. 30006-0026
3121 233 48802
24
Download from Www.Somanuals.com. All Manuals Search And Download.
|