Docking Entertainment System
Rwewgistwer.pyohuirlipprosd.cucotmand/wgeetlscuoppmoret at
DC315
EN User manual
nload from Www.Somanuals.com. All Manuals Search And Down
EN
1 Important
Safety
Important Safety Instructions
a
b
c
d
e
f
g
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
h
i
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
j
k
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from
tip-over.
nload from Www.Somanuals.com. All Manuals Search And Down
l
m
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
n
o
Apparatus shall not be exposed to dripping or splashing.
Do not place any sources of danger on the apparatus (e.g.
liquid filled objects, lighted candles).
p
This product may contain lead and mercury. Disposal of
these materials may be regulated due to environmental
considerations. For disposal or recycling information, please
contact your local authorities or the Electronic Industries
q
Where the MAINS plug or an appliance coupler is used as
the disconnect device, the disconnect device shall remain
readily operable.
Important notes for users in the U.K.
Mains plug
This apparatus is fitted with an approved 13 Amp plug.To change a fuse
in this type of plug proceed as follows:
a
b
Remove fuse cover and fuse.
Fix new fuse which should be a BS1362 3 Amp,A.S.T.A. or BSI
approved type.
c
Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut
off and an appropriate plug fitted in its place.
nload from Www.Somanuals.com. All Manuals Search And Down
If the mains plug contains a fuse, this should have a value of 3 Amp. If a
plug without a fuse is used, the fuse at the distribution board should not
be greater than 3 Amp.
Note:The severed plug must be disposed off to avoid a possible shock
hazard should it be inserted into a 13 Amp socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured with the following code: blue
= neutral (N), brown = live (L).
As these colours may not correspond with the colour markings
identifying the terminals in your plug, proceed as follows:
•
•
•
Connect the blue wire to the terminal marked N or coloured
black.
Connect the brown wire to the terminal marked L or coloured
red.
Do not connect either wire to the earth terminal in the plug,
marked E (or ) or coloured green (or green and yellow).
e
Before replacing the plug cover, make certain that the cord grip is
clamped over the sheath of the lead - not simply over the two wires.
Copyright in the U.K.
Recording and playback of material may require consent. See Copyright
Act 1956 andThe performer’s Protection Acts 1958 to 1972.
Warning
•
•
•
•
•
Never remove the casing of this apparatus.
Never lubricate any part of this apparatus.
Never place this apparatus on other electrical equipment.
Keep this apparatus away from direct sunlight, naked flames or heat.
Ensure that you always have easy access to the power cord, plug or
adaptor to disconnect the apparatus from the power.
nload from Www.Somanuals.com. All Manuals Search And Down
Notice
This product complies with the radio interference
requirements of the European Community.
This product complies with the requirements of the
following directives and guidelines: 2004/108/EC +
2006/95/EC
Any changes or modifications made to this device that are not
expressly approved by Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Recycling
Your product is designed and manufactured with high
quality materials and components, which can be recycled
and reused.
When you see the crossed-out wheel bin symbol attached to
a product, it means the product is covered by the European
Directive 2002/96/EC:
Never dispose of your product with other household
waste. Please inform yourself about the local rules on the separate
collection of electrical and electronic products. The correct disposal
of your old product helps prevent potentially negative consequences
on the environment and human health.
Environmental information
All unnecessary packaging has been omitted. We have tried to make
the packaging easy to separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags, protective foam
sheet.)
Your system consists of materials which can be recycled and reused
if disassembled by a specialized company. Please observe the local
regulations regarding the disposal of packaging materials, exhausted
nload from Www.Somanuals.com. All Manuals Search And Down
batteries and old equipment.
2 Your Docking Entertainment
System
Congratulations on your purchase, and welcome to Philips!To fully
benefit from the support that Philips offers, register your product at
Introduction
With this unit, you can enjoy audio from the iPod, iPhone, other audio
devices, or the radio.
The radio, iPod, or iPhone can be set as the alarm timer.You can set two
alarm timers to go off at different times.
What’s in the box
Check and identify the contents of your package:
•
•
•
•
•
•
Main unit
Power cord
1 x AC adaptor
1 x MP3 link cable
User manual
Quick start guide
Overview of the main unit (See 1)
a
REPEAT ALARM/BRIGHTNESS CONTROL
•
•
Repeat the alarm.
Adjust the display brightness.
b
ALM 1/ALM 2
Set the alarm timer.
nload from Www.Somanuals.com. All Manuals Search And Down
•
•
Turn off the alarm tone.
c
d
e
f
g
h
•
Start or pause iPod/iPhone play.
SOURCE
•
Select a source: iPod/iPhone, FM tuner or MP3 link.
VOL +/-
•
Adjust volume.
Adjuster
•
Adjust the mechanism to fit different iPod/iPhone.
iPod/iPhone dock
•
Load an iPod/iPhone.
/
/PRESET +/-
•
•
•
•
Skip to the previous/next audio file.
Search within an audio file.
Select a preset radio station.
Adjust time.
i
j
POWER
•
Turn on the unit or switch to standby mode.
TUNING +/-
•
•
Tune to a radio station.
Adjust time.
k
TIME SET/AUTO SCAN
•
•
Set the clock.
Program radio stations.
l
m
SLEEP
•
Set the sleep timer.
Display panel
•
Show current status.
nload from Www.Somanuals.com. All Manuals Search And Down
3 Get started
Caution
•
Use of controls or adjustments or performance of procedures
other than herein may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number
of this apparatus.The model number and serial number are on the
bottom of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect power
Caution
•
Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or underside of the
apparatus.
•
•
Risk of electric shock! When you unplug the AC adaptor, always
pull the plug from the socket. Never pull the cord.
Before connecting the AC adaptor, ensure you have completed all
other connections.
Note
•
The type plate is located on the bottom of the main unit.
nload from Www.Somanuals.com. All Manuals Search And Down
1
2
Prepare the AC power adaptor.
Connect one end of the AC adaptor to the DC IN socket on
the main unit.
3
Connect the other end of the AC adaptor to the wall outlet.
Set time and date
1
In standby mode, press and hold TIME SET/AUTO SCAN for
2 seconds.
»
The hour digits are displayed and begin to blink.
2
3
Press TUNING +/- to set the hour.
Press TIME SET/AUTO SCAN to confirm.
»
The minute digits are displayed and begin to blink.
4
Repeat steps 2-3 to set the minute, year, month, day and 12/24
nload from Www.Somanuals.com. All Manuals Search And Down
hour format.
Turn on
1
Press POWER.
The unit switches to the last selected source.
»
Switch to standby
1
Press POWER again to switch the unit to standby mode.
The time and date (if set) appear on the display panel.
»
After being idled for 15 minutes in standby mode, the screen turns
dim automatically.
To light up the screen, press any button.
•
•
Adjust volume
1
During play, press VOL +/- to increase/decrease the volume.
4 Play
Play from iPod/iPhone
You can enjoy audio from iPod/iPhone through this unit.
Compatible iPod/iPhone
Apple iPod and iPhone models with a 30-pin dock connector:
•
iPod classic, iPod touch, iPod nano, iPod 5th generation (video),
iPod with color display, iPod mini.
•
iPhone, iPhone 3G.
nload from Www.Somanuals.com. All Manuals Search And Down
Load the iPod/iPhone
1
Place the iPod/iPhone in the dock.
2
Turn the adjuster to fit the iPod/iPhone.
nload from Www.Somanuals.com. All Manuals Search And Down
Remove the iPod/iPhone
1
Pull the iPod/iPhone out of the dock.
Listen to the iPod/iPhone
1
Ensure that the iPod/iPhone is loaded correctly.
2
Press SOURCE repeatedly to select iPod/iPhone source.
»
The connected iPod/iPhone plays automatically.
•
•
•
To pause/resume play, press
To skip to a track, press
To search during play, press and hold
release to resume normal play.
.
/
.
/
, then
Charge the iPod/iPhone
When the unit is connected to power, the docked iPod/iPhone
begins to charge.
Play from an external device
You can also listen to an external audio device through this unit.
1
Press SOURCE repeatedly to select MP3 link source.
Connect the supplied MP3 link cable to:
2
•
•
the MP3 LINK jack (3.5mm) on the back of the unit.
the headphone jack on an external device.
3
Start to play the device (see the device user manual).
nload from Www.Somanuals.com. All Manuals Search And Down
5 Listen to radio
Note
•
Only FM radio reception is available on this unit.
Tune to a radio station
Tip
•
•
Position the antenna as far as possible from TV, VCR or other
radiation source.
For optimal reception, fully extend and adjust the position of the
antenna.
1
Press SOURCE repeatedly to select FM tuner.
Press and hold TUNING +/- for more than 2 seconds.
2
»
»
[Srch] (search) is displayed.
The radio tunes to a station with strong reception
automatically.
3
Repeat step 2 to tune to more stations.
•
To tune to a weak station, press TUNING +/- repeatedly
until you find optimal reception.
nload from Www.Somanuals.com. All Manuals Search And Down
Program radio stations automatically
You can program a maximum of 20 preset radio stations.
1
In the tuner mode, press and hold TIME SET/AUTO SCAN for
more than 2 seconds to activate automatic program mode.
»
»
[AUTO] (auto) is displayed and begins to blink.
All available stations are programmed in the order of
waveband reception strength.
»
The first programmed radio station is broadcast
automatically.
Program radio stations manually
You can program a maximum of 20 preset radio stations.
1
2
3
4
Tune to a radio station.
Press TIME SET/AUTO SCAN to activate the program mode.
Press PRESET +/- to select a number.
Press TIME SET/AUTO SCAN to confirm.
»
The preset number and the frequency of the preset station
are displayed.
5
Repeat the above steps to program other stations.
Note
•
To overwrite a programmed station, store another station in its place.
Select a preset radio station
1
Press PRESET +/- to select a preset number.
nload from Www.Somanuals.com. All Manuals Search And Down
6 Other features
Set the alarm timer
You can set two alarms which go off at different time.
1
Ensure that you have set the clock correctly.
2
Press and hold ALM 1 or ALM 2 for 2 seconds.
»
or
and hour digits begin to blink.
3
4
Press TUNING +/- repeatedly to set the hour.
Press ALM 1 or ALM 2 to confirm.
»
or
and minute digits begin to blink.
5
6
Repeat steps 3-4 to set the minute.
Repeat steps 3-4 to select whether to ring alarm on weekdays
or at weekend.
7
8
Repeat steps 3-4 to select an alarm sound source.
Repeat steps 3-4 to set the alarm volume.
Activate and deactivate the alarm timer
1
Press ALM 1 or ALM 2 repeatedly to activate or deactivate the
timer.
»
»
If the timer is activated,
If the timer is deactivated,
or
is displayed.
or disappears.
Repeat alarm
1
When the alarm rings, press REPEAT ALARM/BRIGHTNESS
CONTROL.
»
The alarm repeats ringing minutes later.
nload from Www.Somanuals.com. All Manuals Search And Down
Tip
•
You can press TUNING+/- to adjust interval to repeat alarm.
Stop alarm ring
1
When the alarm rings, press the corresponding ALM 1 or ALM
2.
»
The alarm stops but the alarm settings remain.
View the alarm settings
1
Press ALM 1 or ALM 2.
Set the sleep timer
T1his unit can switch to standby automatically after a set period of time.
Press SLEEP repeatedly to select a set period of time (in
minutes).
»
When the sleep timer is activated, the display shows
.
To deactivate sleep timer
1
Press SLEEP repeatedly until [SLP OFF] (SLP off) is displayed.
»
When the sleep timer is deactivated,
display.
disappears on the
Note
When the sleep timer is activated, the volume will gradually decrease.
•
nload from Www.Somanuals.com. All Manuals Search And Down
Adjust display brightness
1
Press BRIGHTNESS CONTROL repeatedly to select different
levels of display brightness.
7 Product information
Note
•
Product information is subject to change without prior notice.
Specifications
Amplifier
Rated Output Power
Frequency Response
Signal to Noise Ratio
MP3 link
2X4 W RMS
125 Hz - 16 kHz, 3 dB
>55 dB
500mV RMS 10 kohm
Tuner
FM
Tuning Range
Tuning grid
87.5 - 108 MHz
50 KHz
Sensitivity
- Mono, 26dB S/N Ratio
<22 dBu
- Stereo, 46dB S/N Ratio
nload from Www.Somanuals.com. All Manuals Search And Down
<45 dBu
Search Selectivity
Total Harmonic Distortion
Signal to Noise Ratio
<28 dBu
<3%
>45 dB
General information
AC power (power adaptor)
Input: 100-240V~, 50/60Hz,
1.0A; Output: 9.0V
Brand name: Philips;
2.78A;
Model No.: AS250-090-AQ278)
Operation Power Consumption
Standby Power Consumption
15W
<2W
Dimensions
- Main Unit (W x H x D)
173 x185 x 144mm
0.66 kg
Weight
- Main Unit
8 Troubleshooting
Warning
•
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the
following points before requesting service. If the problem remains
unsolved, go to the Philips web site (www.philips.com/welcome).When
nload from Www.Somanuals.com. All Manuals Search And Down
you contact Philips, ensure that the apparatus is nearby and the model
number and serial number are available.
No power
•
Ensure that the AC power plug of the unit is connected
properly.
Ensure that there is power at the AC outlet.
•
No sound
•
Adjust the volume.
No response from the unit
•
Disconnect and reconnect the AC power plug, then turn on
the unit again.
Poor radio reception
•
•
Increase the distance between the unit and your TV or VCR.
Fully extend the FM antenna.
Timer does not work
•
•
Set the clock correctly.
Switch on the timer.
Clock/timer setting erased
•
Power has been interrupted or the power plug has been
disconnected.
Reset the clock/timer.
•
nload from Www.Somanuals.com. All Manuals Search And Down
© Royal Philips Electronics N.V. 2009
All rights reserved.
Specifications are subject to change
without notice.Trademarks are the
property of Koninklijke Philips Electronics
N.V. or their respective owners.
Printed in China
nload from Www.Somanuals.com. All Manuals Search And Down
DC315_05_UM_V2.0
|