Wireless Home Entertainment System
MX6000i
Need help? Call us!
Return
Philips representatives are ready to help you with any
questions about your new product.We can guide you
through Connections, First-time Setup, or any of the Features.
We want you to start enjoying your new product right away!
yourWarranty
Registration Card
within 10 days
Y
CALL US BEFORE YOU CONSIDER
RETURNING THE PRODUCT!
1-800-531-0039
or
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
11.Only use attachments/accessories specified by the
manufacturer.
12.
Use only with the cart, stand, tripod,
bracket, or table specified by the manufacturer
or sold with the apparatus.When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
13.Unplug this apparatus during lightning storms or when
7. Do not block any ventilation openings. Install in
accordance with the manufacturer´s instructions.
unused for long periods of time.
14.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
9. Do not defeat the safety
purpose of the polarized or
grounding-type plug.A polarized plug
has two blades with one wider than
15. Battery usage CAUTION –To prevent battery
leakage which may result in bodily injury, property damage,
or damage to the unit:
AC Polarized
Plug
the other.A grounding type plug has two blades and a third
grounding prong.The wide blade or the third prong are
provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of
the obsolete outlet.
G
G
Install all batteries correctly, + and - as marked on the unit.
Do not mix batteries (old and new or carbon and
alkaline, etc.).
10.Protect the power cord from being walked on or
pinched, particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
G
Remove batteries when the unit is not used for a long time.
16. Apparatus shall not be exposed to dripping or
splashing.
17. Do not place any sources of danger on the
apparatus (e.g. liquid filled objects, lighted candles).
18. This product may contain lead and mercury. Disposal of
these material may be regulated due to environment
considerations. For disposal or recycling information,
please contact your local authorities or the
EL 6475-E005: 04/01
Class II equipment symbol
This symbol indicates that the unit has a double
insulation system.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Canada
English:
This digital apparatus does not exceed the Class B limits
for radio noise emissions from digital apparatus as set
out in the Radio Interference Regulations of the
Canadian Department of Communications.
Français:
Cet appareil numérique n'émet pas de bruits
radioélectriques dépassant les limites applicables aux
appareils numériques de Classe B prescrites dans le
Règlement sur le Brouillage Radioélectrique édicté par
le Ministère des Communications du Canada.
CAUTION
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
The unit complies with the FCC-Rules, Part 15 and
with 21 CFR 1040.10. Operation is subject to the
following two conditions:
1.This device may not cause harmful interference,
and
2.This device must accept any interference
received, including interference that may cause
undesired operation.
TestedTo Comply
With FCC Standards
FOR HOME OR OFFICE USE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and the
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Important safety instructions ––––––––––––––––– 3
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Warranty –––––––––––––––––––––––––––––––––– 50
6
Download from Www.Somanuals.com. All Manuals Search And Download.
General information
Supplied accessories
Your Streamium DVD System is delivered with:
– 2 front, 1 center and 2 rear speakers
– 2 subwoofers built into the speaker stands
– 7 speaker cables
Maintenance
Clean the unit with a soft, slightly
dampened, lint-free cloth. Do not
use any cleaning agents as they may
have a corrosive effect.
– 1 RCA-style audio cable (white and red plugs)
– 1 CompositeVideo (CVBS) cable (yellow)
– 1 ComponentVideo cable (red/blue/green)
– 1 FM antenna
Do not expose the unit, batteries
or discs to humidity, rain, sand or
excessive heat (caused by heating
equipment or direct sunlight).
– 1 AM loop antenna
– 1 AC power cable
– 1 Category 5 Ethernet cable
– 1 remote control
Always keep the trays of your unit
closed to protect the lens from
dust. Do not use any commonly
available lens cleaning discs, as they
may damage the optical lens of the unit.
– 2 batteries type AA
Setup
The lens may cloud over when the unit is moved from cold
to warm surroundings. Playing a disc is not possible then.
Leave the unit in a warm environment until the moisture
evaporates.
Place the unit on a flat, hard, and stable surface. Do not
place the unit on a carpet.
Do not position the unit on top of other equipment that
might heat it up (e.g. receiver or amplifier).
Disc handling
Do not put anything under the unit (e . g. CDs, magazines).
To take a disc out of its box easily,
press the center spindle while lifting
it.Always hold a disc by the edge
and put it back in its box after use.
Allow at least 10 cm clearance from the rear and top of the
unit and 5 cm from the left and right to prevent overheating.
5 cm
Never attach a sticker to a disc. If
you want to label a disc, use a soft,
felt-tipped pen and write only on
the printed side.
10 cm
10 cm
To clean a disc, wipe it in a straight
line from the center toward the
edge using a soft, lint-free cloth.
Any cleaning agents may damage
the disc!
5 cm
Environmental information
All redundant packing material has been omitted.We have
tried to make the packaging easy to separate into three
single materials: cardboard (box), polystyrene foam (buffer)
and polyethylene (bags, protective foam sheet).
Do not block the ventilation openings.
Do not expose the unit to dripping or splashing.
Do not place any sources of danger (e. g. liquid filled
objects, lighted candles) on the unit.
Your unit consists of materials which can be recycled if
disassembled by a specialized company. Please observe the
local regulations regarding the disposal of packing materials,
dead batteries and old equipment.
Active mobile phones near the unit may cause
malfunctions.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
Inserting the batteries
1
DVD
INTERNET PC LINK TUNER
2
3
AUX
TV
1 Open the battery compartment of the remote control.
2 Insert two alkaline batteries, type AA (R06, UM-3),
≥
(UN) MARK
FAVORITES
ANGLE ZOOM
VIEW
according to the + and – indications.
4
5
SUBTITLE
AUDIO
§
∞
3 Close the battery compartment.
Do not combine old and new or different types of
batteries.
SYSTEM
DISC
MENU
6
≤
£
7
8
9
Remove batteries if they are discharged or if the remote
control will not be used for a long time.
Batteries contain chemical substances, so they should
be disposed of properly.
™
¡
RETURN
RESUME
0
!
Using the remote control
-
DEF
MNO
WXYZ
–
ABC
JKL
TUV
.@
1 Aim the remote control directly at the remote sensor of
GHI
the Streamium System.
@
PQRS
SOUND
2 Select the source you wish to control by pressing one of
the source buttons on the remote control, e. g.TV,TUNER.
SURROUND
#
)
(
*
&
3 Next, select the desired function, e. g. 2OK.
SHUFFLE
REPEAT
RECENT
USER
INFO !
MUTE
$
%
^
Using the remote control to
control a PhilipsTV
WhenTV is selected, the remote control will control some
functions on your PhilipsTV, e. g.
– 0–9 select aTV channel.
– SYSTEM MENU switches the system menu of theTV
on/off.
– 1, 2, 3, 4 navigate in the system menu.
– S, T select the previous/nextTV channel.
– 9 exits the system menu of theTV.
– MUTE mutes the sound on theTV.
– INFO! switchesTV text on/off.
To control theTV, aim the remote control directly at theTV.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
1 2
@ 0–9 to enter numbers 0–9 and characters
switches the unit to standby (off).To activate the unit, press
any source button.
(to enter a number with two or more digits, press 0–9
repeatedly within 2 seconds)
2 source buttons
# SURROUND
INTERNET connects to the Internet
PC LINK connects to the PC
selects the different sound settings: multi-channel surround,
Hall or stereo mode.
DVD selects discs 1–5. Press repeatedly.
TV plays theTV sound on the Streamium System.
TUNER selects FM or AM radio. Press repeatedly.
AUX selects AUX DIGITAL or AUX ANALOG. Press
repeatedly.
$ RECENT
INTERNET, PC LINK: displays the last 20 items played
% USER
selects an active user
3
4
VIEW FAVORITES
INTERNET,TUNER: shows your favorite Internet media
services and radio stations
^ MUTE
switches the speakers’ sound off or on again.
TV: switches the sound on theTV off/on.
(UN)MARK FAVORITES
& INFO!
INTERNET,TUNER: marks and unmarks favorites
INTERNET, PC LINK: requests on-line information about
currently playing item through e-mail (if available).
5 AUDIO (blue button)
DVD: selects an audio channel (e. g. a different language)
during playback of a DVD or (Super)Video CD
INTERNET, PC LINK: multifunction button
* REPEAT
selects the different repeat modes (depending on the
media type); switches repeat mode off.
–
6 VOL+,
( SHUFFLE
adjust the volume
plays tracks in random order
7 DISC MENU
) SOUND
enters and exits the disc menu (DVD)
selects a different sound setting for bass, treble, loudness
and clearvoice.
8 1 2 3 4
moves the cursor left, right, up or down in the menus
TUNER: 3, 4 selects favorite radio stations,
1, 2 tunes to a radio station, press for 1 second to auto
search for a radio station.
¡ 9
stops playback.
™ RETURN
returns to the previous menu.
9 T
£ 2OK
DVD: skips to the beginning of the next chapter/title/track
of a disc; searches forward if pressed longer than 2 seconds.
Press again for various search speeds.
TV: selects a higher channel.
starts playback, resumes playback, or confirms a selection.
≤ SYSTEM MENU
DVD, INTERNET, PC LINK,AUX: enters the system menu.
0 S
∞ ZOOM (yellow button)
DVD: skips to the beginning of the current or previous
chapter/title/track of a disc; searches backward if pressed
longer than 2 seconds. Press again for various search
speeds.
shows a close up view of a particular portion of the picture
on theTV screen,
INTERNET, PC LINK: multifunction button
§ SUBTITLE (red button)
TV: selects a lower channel.
switches on or off the subtitles of a DVD during playback
INTERNET, PC LINK: multifunction button
! ;
pauses playback
≥ ANGLE (green button)
selects the camera angle (if available) of a DVD during
playback
INTERNET, PC LINK: multifunction button
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
^
%
$
#
@
!
0
9
1
2
3
4
5
6
7
8
1 STANDBY-ON
9 VOLUME
adjusts the volume
switches the unit on or to standby (off)
2 IR sensor for the remote control
0 ;
pauses playback
! 2OK
starts playback, resumes playback, or confirms a selection
@ SOURCE
3 INTERNET, PC LINK: multifunction button (same function
as red button on the remote control)
4 display
5 INTERNET, PC LINK: multifunction button (same function
selects a source (DISC 1–5,TV,TUNER,AUX DIGITAL,
AUX ANALOG, INTERNET, PC LINK)
as green button on the remote control)
6 1 2 3 4
#
moves left, right, up or down in the menus,
selects favorite radio stations
INTERNET,TUNER: shows your favorite Internet media
services and radio stations
7 9
$ (same function as RECENT on the remote control)
stops playback
INTERNET, PC LINK: displays the last 20 items played
8 p
% disc trays 1–5
6.3 mm headphones jack
^ DISC 1–5, OPEN·CLOSE /
opens/closes disc trays 1–5
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
% $ #
@
ETHERNET
FRONT
LEFT
FRONT
RIGHT
CENTRE
CVBS
SURR
LEFT
SUB-W
LEFT
ANTENNA
AM
DIGITAL
OUT
FM
L
SURR
RIGHT
SUB-W
RIGHT
P-SCAN
DIGITAL
IN
R
AUX IN
TV IN
AUDIO
LINE OUT
S - VIDEO
VIDEO OUT
ON
OFF
COMPONENT
1
2
3 4 5 6 7 8 9
0 !
1 FRONT LEFT, FRONT RIGHT, CENTRE,
SURR LEFT, SURR RIGHT
7 VIDEO OUT/S-VIDEO
connect to S-Video input of theTV
FRONT LEFT: connect the front left speaker
FRONT RIGHT: connect the front right speaker
CENTRE: connect the center speaker
8 COMPONENT PR, PB,Y
connect to the corresponding Component video inputs of
theTV
SURR LEFT: connect the surround left speaker
SURR RIGHT: connect the surround right speaker
9 P-SCAN
to switch on or off progressive scan
2 SUB-W LEFT, SUB-W RIGHT
connect the left and right subwoofers
0 ANTENNA / AM
connect the AM loop antenna
3 AUX IN L, R
connect to the left and right analog audio output jacks of
external equipment (e. g. tape deck,VCR, …)
! ANTENNA / FM
connect the FM antenna cable
4 TV IN L, R
@ MAINS ~
connect to the left and right AUDIO OUT jacks of theTV
After all other connections have been made, connect
the power cable to the power outlet.
5 LINE OUT L, R
connect to the left and right analog audio input jacks of an
external equipment (e. g. tape deck, …)
# ETHERNET
connect to router, broadband Internet, or PC
6 VIDEO OUT/CVBS
$ DIGITAL OUT
connect to the CompositeVideo input of theTV
connect to the digital coaxial input of digital equipment
% DIGITAL IN
connect to the digital coaxial output of digital equipment
Before starting with the connections, make sure
all equipment you want to connect – as well as the
Streamium System – are disconnected from the
power outlets.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting …
Before you make connections, make sure the unit is
not connected to the power supply.
Attaching the rear speakers to the wall
Assembling of the speakers
You can use the subwoofers as speaker stands for the front
or for the rear speakers.The following text describes the
setup of the subwoofers in the front.
Attaching the front speakers to the subwoofers
white (red) purple
1 Attach the supplied bracket firmly to the rear of the rear
speaker using the supplied screws.
2 Hook the speaker carefully onto a screw in the wall, using
the hole in the bracket.
Positioning of the speakers and
the subwoofers
1 Connect the speaker cables to the connectors on the
bottom of the subwoofers before attaching the front
speakers.
centre
2 Put the front speakers on top of the subwoofers and press
them down gently until you hear a “click.”
➜ The front speakers are now connected to the
subwoofers.
front L,
subwoofer
front R,
subwoofer
3 Next, attach the rear speakers to the wall or use the
supplied mini speaker stands.
Attaching the mini speaker stands to the rear
speakers
rear L
rear R
1 Place the subwoofers with the front speakers at an equal
distance to yourTV.The distance between your listening
position and the left and right front speakers should be
approximately equal to the distance between the left and
right front speakers.
2 Place the center speaker on top of theTV.
3 Place the left and right rear speakers to the left and right
of your preferred listening position.
Notes:
Keep the speakers away from the room´s corners.
Position the speakers at ear level.
Leave enough space between the left and right front
speakers and theTV to avoid magnetic interference.
G
Attach a supplied speaker stand firmly to the bottom of
each rear speaker using the supplied screws.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting …
Connecting the speakers and the
subwoofers
Connecting the tuner antennas
We recommend connecting all speakers. At least the
front speakers (left and right) and the subwoofers
must be connected. If you do not connect all speakers,
press SURROUND repeatedly to select STEREO after
switching on the Streamium System.
➠
When connecting the speakers make sure the colors
of the speaker cables correspond with the colors of the
connectors.
ETHERNET
CVBS
ANTENNA
1 Insert the supplied speaker cables into the click-fit
L
AM
FM
connectors on the speakers.
P-SCAN
R
AUX IN
TV IN
AUDIO
LINE OUT
S
-
VIDEO
ON
COMPONENT
OFF
VIDEO OUT
2 Then connect the speaker cables to the corresponding
click-fit connectors on the rear of the unit so that the
colors of the speaker connectors and the speaker cables
match.
Connecting the FM antenna
1 Connect the supplied FM antenna cable to the
FM ANTENNA jack on the rear of the unit.
+
−
Speaker
Front Left
Front Right
Center
Surround Left
Surround Right
Subwoofer Left
Subwoofer Right
white
red
green
blue
grey
purple
purple
black
black
black
black
black
black
black
2 Extend the antenna cable and put it in a position where the
reception is best.
Connecting the AM antenna
1 Assemble the supplied AM loop antenna as shown above.
2 Connect the antenna to the AM ANTENNA jack on the
rear of the unit.
3 Place the antenna on a shelf or mount it on the wall in a
How to use the click fit connectors
1 Press down the clip and fully insert the stripped portion of
the speaker cable into the socket.
position where the reception is best.
2 Release the clip again.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting …
Connecting theTV
Using CompositeVideo (CVBS)
After connecting the speakers, choose one of several kinds
of video connections, which differ in quality. For the
availability of the necessary connectors on yourTV, please
read the user´s manual of yourTV.
COMPONENT
VIDEO IN
S-VIDEO
IN
AUDIO
Pr/Cr
OUT
Pb/Cb
Y
VIDEO IN
COMPONENT
V
I
D
E
O
I
N
S-VIDEO
IN
Pr/Cr
AUDIO
OUT
Pb/Cb
V
I
D
E
O
I
N
Y
You only need one video connection between the
TV and the Streamium System (Component Video,
S-Video, or Composite Video).
S-Video or ComponentVideo provides better picture
quality than CompositeVideo.To use these connections,
these options must be available on yourTV.
ETHERNET
FRONT
LEFT
FRONT
RIGHT
CENTRE
CVBS
SURR
LEFT
SUB-W
LEFT
DIGITAL
OUT
L
SURR
RIGHT
SUB-W
RIGHT
Connect the Streamium System directly to theTV.
DIGITAL
IN
P-SCAN
R
AUX IN
TV IN
AUDIO
LINE OUT
S
-
VIDEO
VIDEO OUT
ON
COMPONENT
OFF
Using ComponentVideo (PR PBY)
COMPONENT
VIDEO IN
1 Use the composite video cable (yellow) to connect the
Streamium System’s CVBS jack to the video input jack (or
labelled as A/V In,Video In, Composite) on theTV.
S-VIDEO
IN
Pr/Cr
AUDIO
OUT
Pb/Cb
VIDEO IN
COMPONENT
Y
V
I
D
E
O
I
N
S-VIDEO
IN
Pr/Cr
AUDIO
OUT
Pb/Cb
V
I
D
E
O
I
N
Y
2 To hear the sound of theTV through this Streamium
System, use the audio cable (white/red) to connectTV IN
(L/R) on the Streamium System to the corresponding
AUDIO OUT jacks on theTV.
ETHERNET
FRONT
LEFT
FRONT
RIGHT
3 Set the P-SCAN switch to OFF.
Pr
CENTRE
CVBS
SURR
LEFT
SUB-W
LEFT
DIGITAL
OUT
L
Pb
SURR
RIGHT
SUB-W
RIGHT
Using S-Video
DIGITAL
IN
P-SCAN
R
Y
AUX IN
TV IN
AUDIO
LINE OUT
S
-
VIDEO
VIDEO OUT
ON
COMPONENT
OFF
COMPONENT
VIDEO IN
S-VIDEO
IN
Pr/Cr
AUDIO
OUT
Pb/Cb
VIDEO IN
1 Use the component video cables (red/blue/green) to
connect the Streamium System’s COMPONENT PR PB Y
jacks to the corresponding ComponentVideo Input jacks
(or labelled as Pr/Cr Pb/CbY orYUV) on theTV.
COMPONENT
Y
V
I
D
E
O
I
N
S-VIDEO
IN
Pr/Cr
AUDIO
OUT
Pb/Cb
V
I
D
E
O
I
N
Y
2 To hear the sound of theTV through this Streamium System,
use the audio cables (white/red) to connectTV IN (L/R)
jacks to the corresponding AUDIO OUT jacks on theTV.
ETHERNET
FRONT
LEFT
FRONT
RIGHT
CENTRE
CVBS
SURR
LEFT
SUB-W
LEFT
DIGITAL
OUT
L
SURR
RIGHT
SUB-W
RIGHT
3 If you are using a Progressive ScanTV (TV must indicate
Progressive Scan or ProScan capability,) set the P-SCAN
switch (at the rear of the Streamium System) to ON.
Otherwise, set it to OFF.
DIGITAL
IN
P-SCAN
R
AUX IN
TV IN
AUDIO
LINE OUT
S
-
VIDEO
VIDEO OUT
ON
COMPONENT
OFF
Notes:
1 Use an S-Video cable (not supplied) to connect the
Streamium System’s S-VIDEO jack to the S-Video input jack
(or labelled asY/C or S-VHS) on theTV.
To set Video Output to ‘Y PB PR’, change the setting manually
in the System Menu. See chapter “No picture or distorted
picture.”
The progressive scan video quality is only possible through
the COMPONENT PR PBY output.
2 To hear the sound of theTV through this Streamium
System, use the audio cable (white/red) to connectTV IN
(L/R) on the Streamium System to the corresponding
AUDIO OUT jacks on theTV.
3 Set the P-SCAN switch to OFF.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting …
Connecting audio equipment
Connection for digital or analog recordings
Connections for playback
To play the sound of additional audio equipment on the
Streamium System, one digital and one analog connection
are available.
~
AC
M
OUT
IN
OUT
IN
ANALOG
DIGITAL
ANALOG
OUT
IN
Tape deck
digital
or
analog
ETHERNET
FRONT
LEFT
FRONT
RIGHT
CENTRE
CVBS
SURR
LEFT
SUB-W
DIGITAL
OUT
LEFT
L
SURR
RIGHT
SUB-W
RIGHT
DIGITAL
IN
P-SCAN
R
OUT
IN
AUX IN
TV IN
AUDIO
LINE OUT
S
-
VIDEO
ON
COMPONENT
OFF
CD recorder
VIDEO OUT
OUT
IN
ANALOG
DIGITAL
G
To record the sound from the Streamium System to a
digital system, connect a digital RCA-style cable to
DIGITAL OUT on the Streamium System and to the
DIGITAL IN jack of the digital equipment.
ETHERNET
FRONT
LEFT
FRONT
RIGHT
CENTRE
CVBS
SURR
LEFT
SUB-W
LEFT
0
When digital recording is not permissible, record the analog
sound from the Streamium System. Use the audio cable
(white/red) to connect LINE OUT (L/R) on the Streamium
System to the corresponding AUDIO IN (L/R) jacks on the
digital equipment.
DIGITAL
OUT
L
SURR
RIGHT
SUB-W
RIGHT
DIGITAL
IN
P-SCAN
R
AUX IN
TV IN
AUDIO
LINE OUT
S
-
VIDEO
ON
COMPONENT
OFF
VIDEO OUT
1 Connect a digital RCA-style cable to the DIGITAL IN of the
Streamium System and to the digital output jack of the
digital equipment.
0
Refer to the Instruction Manual of the digital equipment on
recording.
Recording is permissible insofar as copyright or other
rights of third parties are not infringed upon.
2 Connect an RCA-style audio cable to AUX IN (L/R) on the
Streamium System and to the left and right analog output
jacks of your tape deck, CD player, or similar.
When playing an MP3-CD on the Streamium System,
no signal will be available using DIGITAL OUT.
Notes:
To use these connections, press AUX on the remote control
repeatedly (or rotate SOURCE on the Streamium System) to
select AUX DIGITAL or AUX ANALOG.
This product incorporates Macrovision copyright protection
technology that is protected by US patent no. 4631603,
4577216 and 4819098, as well as other intellectual
property rights. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is only
intended for home use and other pay-per-view applications.
Macrovision must provide written authorization for any
other use. Change to the device, reverse engineering or
disassembly is prohibited.
You cannot connect a turntable to AUX IN.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting …
Connecting to power supply
Switching on the system
DVD
INTERNET PC LINK TUNER
ANTENNA
AM
AUX
TV
FM
(UN) MARK
FAVORITES
ANGLE ZOOM
VIEW
SUBTITLE
AUDIO
SYSTEM
MENU
DISC
MENU
The type plate is located on the rear of the unit.
G
Press STANDBY-ON on the Streamium System or one of
the source buttons on the remote control (DVD,TV,
TUNER,AUX, INTERNET, PC LINK) to switch on the
Streamium System.
1 Check whether the power voltage as shown on the type
plate corresponds to your local power voltage. If it does
not, consult your dealer or service organization.
2 Make sure yourTV is switched off before connecting the
Selecting a source
Turn SOURCE on the Streamium System or press DVD,
INTERNET, PC LINK,TUNER,TV or AUX on the remote
control to select a source.
Streamium System to the power supply for the first time.
G
3 Make sure all connections have been made before
switching on the power supply.
➜ The selected source will be displayed.
4 Connect the supplied power cable to MAINS ~ at the rear
of the Streamium System and to the power outlet.
On the remote control:
– To select disc 1, 2, … 5, press DVD repeatedly.
– To select equipment connected to AUX IN or
DIGITAL IN on the Streamium System, press AUX
repeatedly.
When the unit is switched to standby (off), it is still
consuming some power.To disconnect the unit from the
power completely, remove the power plug from the
wall outlet.
To avoid overheating of the unit, a safety circuit has
been built in.Therefore your unit may disconnect
under extreme conditions. If this happens, unplug the
unit and let it cool down before reusing it.
Switching to Eco Power standby
Press STANDBY-ON on the Streamium System or 2 on
the remote control.
➜ The STANDBY-ON button will light up on the system.
➜ The display screen will go blank.
G
Note:The Streamium System will switch to Standby
automatically after 20 minutes of no activities, if “Sleep timer”
is switched on in the System Menu and if DVD or INTERNET is
selected.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings for theTV
The following settings optimize the connection between
the Streamium System and theTV.
TV Shape
You may set the Streamium System to display a DVD movie
in one of three formats: Letterbox, Panscan, or Widescreen.
TheTV Shape you select must be supported by the movie.
If not, theTV Shape settings will not affect the picture.
Check if you see a picture
1 Switch on yourTV.
1 Press SYSTEM MENU on the remote control.
2 Press AUX on the remote control.
3 Next, press SYSTEM MENU on the remote control.
2 DVD: Use 1, 2, 3 or 4 to select Setup ➜ TV ➜
TV Shape.
4 If necessary set theTV to the correct audio/video channel
for the Streamium System. Such channels may be called
AUX or AUXILIARY IN,AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc.These channels are often near
channel 00. If you are using an RF modulator, select the
channel for the RF modulator.
INTERNET, PC LINK,AUX: Use 1, 2, 3 or 4 to select
Picture ➜ TV Settings ➜ TV Shape.
DVD
Stop
View
TV
Program
Setup
TV shape
➜ The system menu of the Streamium System should
appear on theTV.
NTSC
4:3 Panscan
TV shape
4:3 Letterbox
Widescreen
No picture or distorted picture
The Streamium System may be set to the wrong video
signal. Observe the display on the Streamium System.
Video output
Surround R Size
1 If necessary, press AUX on the remote control. Next, press
Use or ≠ to select other options, = to enter the option
SYSTEM MENU.
2 Press 4 repeatedly to select PICTURE. Next press 2.
3 Press 2 to enter the menu and 4 to select
– 4:3 Letterbox if you have a
regularTV and the picture will have
black bars at the top and bottom
of the screen,
3 Press 4 repeatedly to select TV SETTINGS. Next, press 2.
4 Press 4 repeatedly to select VIDEO OUTPUT.
Next, press 2.
5 Press 4 or 3 repeatedly to select
– Y PB PR (COMPONENT VIDEO)if you have connected
theTV to COMPONENT PR PB Y on the Streamium
System,
– 4:3 Panscan if you have a
regularTV and both sides of
the picture will be trimmed
to fit yourTV screen,
– CVBSif you have connected theTV to CVBS or S-Video
on the Streamium System.
– Widescreen if you have a
6 Press 2OK to confirm the setting.
widescreenTV.
7 Next, press SYSTEM MENU to exit the system menu.
Note: Some widescreenTVs may show only part of the System
Menu.This is not an error of the Streamium System settings.
Adjust the screen mode on yourTV. See yourTV owner’s manual
for details.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the System Menu
INTERNET PC LINK TUNER
AUX
TV
(UN) MARK
FAVORITES
ANGLE ZOOM
VIEW
SUBTITLE
AUDIO
SYSTEM
MENU
DISC
MENU
RETURN
RESUME
-
DEF
MNO
WXYZ
–
ABC
JKL
TUV
GHI
PQRS
The System Menu allows you to operate features available
in this Streamium System.
Please be aware that the System Menu and the available
features in the menu depend on the selected source. Even
though the System Menus of DVD and INTERNET/PC LINK
look different, many features (e. g. color settings, parental
control, etc.) are available in both menus and work similarly.
Most of the illustrations in this manual show the System
menu when DVD is selected.
1 Press SYSTEM MENU on the remote control to enter the
System menu.
2 Press 1, 2, 3, 4 on the remote control to navigate in the
menu, to select a feature or to change the setting of a
feature.
3 Press 2OK to confirm a setting.
0
To exit the System Menu press SYSTEM MENU.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Volume and sound
SYSTEM
MENU
DISC
MENU
Adjusting the Surround Sound
To have optimum surround sound ensure that all the
speakers and subwoofers are connected properly.
The available multi-channel sounds include: DTS (Digital
Theater Systems) Surround, Dolby Digital, Dolby Surround
and Dolby Pro Logic 2.
RETURN
RESUME
A sursound sound effect will only be available if it is
supported by the disc, the media file, or the media service
you are playing.
-
DEF
MNO
–
ABC
JKL
TUV
.@
GHI
PQRS
SOUND
WXYZ
The number of speakers that play a sound depends on
the selected surround sound and the sound available on
the disc (e .g. when Stereo is selected, only the front left
and right speakers and the subwoofers will operate).
SURROUND
SHUFFLE
REPEAT
RECENT
USER
INFO !
MUTE
G
Press SURROUND on the remote control repeatedly to
select STEREO, MULTI-CHANNEL (DTS and DOLBY) or HALL.
➜ The selected sound will be displayed.
Notes:
Adjusting theVolume
TurnVOLUME on the Streamium System or pressVOL+ or
VOL– on the remote control to adjust the volume.
➜ The volume setting will be displayed.
You can also set the Surround sound in the System Menu.
See “Analogue output.”
If you have not connected all speakers, press SURROUND
repeatedly to select STEREO.
G
0
0
To switch off the sound, press MUTE on the remote
control.
To switch the sound on again, press MUTE again.
Manufactured under license from Dolby
Laboratories.“Dolby”,“Pro Logic”, and
the double-D symbol are trademarks
of Dolby Laboratories.
Note:WhenTV is selected, MUTE will switch off the sound on
your PhilipsTV.
Adjusting Bass,Treble, Loudness
and ClearVoice
Manufactured under license from
DigitalTheater Systems, Inc. US Pat. No.
5,451,942, 5,956,674, 5,974,380, 5,978,762
and other world-wide patents issued
and pending.“DTS” and “DTS Digital Surround” are
registered trademarks of DigitalTheater Systems, Inc.
Copyright 1996, 2000 DigitalTheater Systems, Inc.
All Rights reserved.
1 Press SOUND on the remote control repeatedly to select
BASS, TREBLE, LOUDNESS or CLEARVOICE.
2 Bass orTreble:Within 3 seconds, press 1, 2, 3 or 4 to
adjust the level of bass/treble.
Loudness or ClearVoice:Within 3 seconds, press 1, 2, 3 or
4 to switch Loudness/ClearVoice on or off.
3 Press 2OK on the remote control to confirm.
Note: ClearVoice enhances the voices in surround sound signals
to make dialogues easier to follow. ClearVoice is available for
surround sounds only.
Listening through Headphones
G
Connect the headphones plug (6.3mm) to the headphones
jack (;) on the Streamium System.
➜ The sound on all the speakers will be muted.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Internet and PC Link
General information on
How to ensure a good wireless connection
– Place your wireless router as close as possible to the
center of the area you want to cover.
INTERNET and PC LINK
This Philips Streamium System is a wireless broadband
Internet system. It is compliant with the IEEE 802.11g
standard.The Streamium System can connect to your
wireless or wired home network and play various Internet
media services (e. g. Internet radio, video …) as well as
media files (music, pictures …) stored on the PCs of your
home network.
– Keep the antenna(s) away from large metal objects to
avoid interference.
– Avoid placing the Streamium System close to microwave
ovens.
– Avoid placing this Streamium System directly under or
above the wireless router.
– Refer to the signal strength indication to locate the
best position for the wireless router and the Streamium
System.To display the signal strength indication,
press SYSTEM MENU and select Network. Next,
select Wireless Info ➜ Signal Level.
The Streamium System is upgradable through your Internet
connection. From time to time, new features will be
available and the functionality of this Streamium System will
change.Therefore, this manual offers only a rough overview
of the Internet and PC link functionality.
Please visit “My.Philips.com” for the latest information on
available services and new functionality.
Network name (SSID)
The network name (SSID) identifies your computer in a
wireless network. Please keep in mind that the network
name is case sensitive.
Requirements to use Internet media services
– broadband Internet access (DSL, cable modem),
– an email address.
WEP encryption
WEP encryption protects your wireless network against
intrusion.WEP encryption uses up to 4 encryption keys to
encrypt the data sent in your wireless network.
If you use WEP encryption make sure
– the number and the order of encryption keys on the
Streamium System and on your wireless router/wireless
network adapter are the same,
– all encryption keys you enter have the same format
(either ASCII or HEX format) and the same length
(ASCII, either 5 or 13 characters; HEX, either 10 or 26
digits).
Please ask your Internet service provider
– if you can connect several devices (computers and the
Streamium System) to your Internet connection,
– if he allows only devices with registered MAC addresses
to connect to the Internet,
– if he charges extra fees for exceeding a certain limit of
transferred data.When you use Internet media services
on a daily basis, you may exceed such a limit. For
example:When you listen to Internet radio (transmitting
at 64 kbit/sec) for about 36 hours, 1 GB (Gigabyte) of
data will be transferred to your Streamium System.
Note: Some wireless routers/wireless network adapters allow
you to type in a passphrase instead of an encryption key. Do
not use passphrases with the Streamium System, since
passphrases are not supported.
Requirements to use PC LINK
– a computer with Windows® operating system
(Windows 98 SE or higher) or Mac OS® X,
– installation of the Philips Media Manager software on
your computer.
The following file formats stored on your computer are
supported at the time of printing this manual (subject to
change):
– Music: MP3 and MP3pro streams; bit rates:
32–320 kbit/sec, variable bit rate
Windows is a registered trademark of Microsoft
Corporation in the United States and other countries.
– Pictures: JPEG, JPEG2000, .bmp, .gif
– Video: MPEG 1, MPEG 2, MPEG 4, DivX® 4.0/5.03
Mac OS is a registered trademark of Apple Computer,Inc.
DivX® is a registered trademark of DivXNetworks, Inc.
Please visit My.Philips.com for the latest information on
supported operating systems and file formats.
Download from Www.Somanuals.com. All Manuals Search And Download.
Internet and PC Link
Before connecting
A)Wireless home network with
wireless router
1 If you have a wired or a wireless home network and you
have not set it up yet, consult the user´s manual of your
(wireless) router on how to set up the network and how
to connect to the Internet.
Follow these instructions if you have
– a wireless router and
– broadband Internet access.
2 Check if the computers in your network connect properly
to the Internet and to each other. If you face any problems
connecting to the Internet, consult your Internet service
provider.
broadband internet
3 Install the Philips Media Manager software on the PCs of
your network:
Either download the latest version at “My.Philips.com” or
install it from the supplied CD-ROM. Please refer to the
installation guide of the Media Manager software for
installing the software and making media files of your PCs
available to the Streamium System.
4 Switch on theTV and set theTV to the correct audio/video
channel for the Streamium System. Such channels may be
called AUX or AUXILIARY IN,AUDIO/VIDEO or A/V IN,
EXT1, EXT2 or EXTERNAL IN, etc.These channels are
often near channel 00.
1 Press INTERNET on the remote control.
➜ The Streamium System tries to connect automatically to
a wireless network.
2 If the Streamium System connects to a wireless network, it
will display its network name (SSID) briefly. Please verify
that the displayed network name corresponds to the
network you want to join. If you want to connect to
another network, press SYSTEM MENU and select
Network Settings ➜ Network Config. to change the
wireless network settings.
Note: If you did not connect the Streamium System to aTV,
observe the display on the Streamium System.
5 Switch on the Streamium System.
6 Depending on your home network, continue with one of
the following 4 sections:
– A) Wireless home network with a wireless router,
– B) PC with a wireless network card or with a wireless
USB adapter,
After connecting to the Internet the Streamium System
will ask you to enter your email address. Continue with
“Registration.”
– C) Wired home network with a router,
– D) PC only with a network interface (Ethernet) card.
If the Streamium System fails to connect, read the message
on theTV screen and continue with one of the following
paragraphs.
Check the illustrations at the beginning of each section to
find out which of the 4 cases describes your home network
best.
If ‘Choose your wireless network’ appears
Several wireless networks or one encrypted network are
available.
1 Press 4 or 3 repeatedly to select the network you want to
join.
If the desired network does not appear, press the
red button (SUBTITLE) on the remote control to select
manual and continue with “If ‘Enter wireless network
name (SSID)’ appears.”
2 Press the green button (ANGLE) on the remote control to
confirm the selected network.
3 If the selected network is WEP encrypted, continue with
“If the network is WEP encrypted.”
If the Streamium System connects to the Internet, continue
with “Registration.”
Download from Www.Somanuals.com. All Manuals Search And Download.
Internet and PC Link
If ‘Are you using a wireless (WiFi/802.11) or a
wired (Ethernet) network connection?’ appears
Press the red button (SUBTITLE) on the remote control to
connect to a wireless network.
If ‘An IP address could not be obtained
automatically.Would you like to enter your
network settings manually?’ appears
G
1 Press the red button (SUBTITLE) on the remote control to
connect again to the Internet automatically.Always try this
solution first. If necessary, repeat this step several times.
If ‘Enter wireless network name (SSID)’ appears
1 Press the red button (SUBTITLE) on the remote control to
search again for all available networks or, use the number
buttons to enter the network name (SSID) of your wireless
network.
2 If the Streamium System connects to the Internet, continue
with chapter “Registration.”
If the Streamium System does not connect to the Internet,
press the green button (ANGLE) on the remote control to
enter the IP settings manually. Please contact your Internet
service provider to get all the information you need below.
The network name is case sensitive. Press the number
buttons repeatedly to change from lower to upper case
characters. On the display of the Streamium System case-
sensitive characters are distinguished by size. For example,
“Gg” will be shown as “GG.”
Next, you will be asked to enter
– the IP address for the Streamium System
– the netmask: Make sure all computers in your network
as well as the Streamium System have the same
netmask. If you are not sure, try 255.255.255.0.
– Default Gateway: the IP address of your router
– two DNS.
2 Press 2OK to confirm.
➜ Are you using an Access Point or Ad-Hoc
network? appears.
3 Press the red button (SUBTITLE) on the remote control to
select Access Point.
➜ Are you usingWEP encryption on your wireless
network? appears.
Use the number buttons on the remote control to enter
each setting and press 2OK to confirm each setting.
4 If your network is not WEP encrypted, press the red button
(SUBTITLE) on the remote control to connect to the
Internet.
If ‘The system could not connect to the server.’
appears
Maybe the system does not connect to the Internet
because your Internet service provider uses a proxy.You
need to enter the proxy name and proxy port. Please
contact your Internet service provider to get this
information.
If the network is WEP encrypted, press the green button
(ANGLE) on the remote control.
If the network isWEP encrypted
You will be asked to enter up to 4 encryption keys. Check
the setup menu of your wireless router to see which
encryption keys are used.
1 Press the green button (ANGLE) on the remote control if
your Internet service provider uses a proxy.
2 Use the number buttons to enter the proxy name. Next,
1 Use the number buttons to enter the encryption key. Next,
press 2OK.
press 2OK to confirm.
3 Use the number buttons to enter the proxy port. Next,
press 2OK.
2 Repeat step 1 for all encryption keys. If not all of the
4 encryption keys are used in your network, enter “0”
(zero) for no encryption key.
➜ The Streamium System tries to connect to the Internet.
PC LINK connection
If the Streamium System does not connect to the
Internet
The Streamium System may not connect to the Internet
because
G
After the Streamium System has connected successfully to
the Internet, press PC LINK to connect to the PCs in your
network.
– a connection error has occurred. Press INTERNET again
to reconnect.
The Streamium System may not connect to the PC
because
– the wireless router is not connected to the Internet.
Check if the computers in your network have access to
the Internet.
– a connection error has occurred. Press PC LINK again.
– you have not yet installed the Philips Media Manager
software on your PC.
– the IP settings are not correct. Continue with “If ‘An IP
address could not be obtained automatically.Would you
like to enter your network settings manually?’ appears.”
– your Internet service provider is using a proxy. Continue
with “If ‘The system could not connect to the server.’
appears.”
– the PC is switched off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Internet and PC Link
B)PC with a wireless network card
2 Press the green button (ANGLE) on the remote control to
confirm the selected network.
or with a wireless USB adapter
Follow these instructions
– if you have no router and
– if you have a PC with a wireless network card or with a
wireless USB adapter.
3 If the selected network is WEP encrypted, continue with
“If the network is WEP encrypted.”
If ‘Are you using a wireless (WiFi/802.11) or a
wired (Ethernet) network connection?’ appears
Press the red button (SUBTITLE) on the remote control to
connect to a wireless network.
You will be able to access media files (e. g. MP3 files) stored
on your PC.
G
If ‘Enter wireless network name (SSID)’ appears
1 Press the red button (SUBTITLE) on the remote control to
search again for all available networks or, use the number
buttons to enter the network name (SSID) of your PC.
wireless
USB adapter
The network name is case sensitive. Press the number
buttons repeatedly to change from lower to upper case
characters. On the display of the Streamium System case-
sensitive characters are distinguished by size. For example,
“Gg” will be shown as “GG.”
2 Press 2OK to confirm.
➜ Are you using an Access Point or Ad-Hoc
network? appears.
1 Make sure the network settings of the wireless network
card on your PC are set to “ad-hoc mode” (“peer-to-peer”
or “computer-to-computer”).
3 Press the green button (ANGLE) on the remote control to
select Ad-Hoc network.
2 If necessary, switch on your PC.
➜ Are you usingWEP encryption on your wireless
network? appears.
3 Press PC LINK on the remote control.
➜ The Streamium System tries to connect automatically to
a wireless network.
4 If your network is not WEP encrypted, press the red button
(SUBTITLE) on the remote control to connect to your PC.
4 If the Streamium System connects to a wireless network, it
will display its network name (SSID) briefly. Please verify
that the displayed network name corresponds to your
PC. If it does not, press SYSTEM MENU and select
Network Settings ➜ Network Config. to change the
wireless network settings.
If the network is WEP encrypted, press the green button
(ANGLE) on the remote control.
If the network isWEP encrypted
You will be asked to enter up to 4 encryption keys. For the
encryption keys check the network settings of the wireless
network card on your PC.
If the Streamium System connects to the PC, the computer
name of your PC will be displayed. Please keep in mind that
“network name” (SSID) and “computer name” are not the
same.
1 Use the number buttons to enter the encryption key. Next,
press 2OK to confirm.
2 Repeat step 1 for all encryption keys. If not all of the
4 encryption keys are used in your network, enter “0”
(zero) for no encryption key.
If the Streamium System fails to connect, read the message
on theTV screen and continue with one of the following
paragraphs.
If the Streamium System does not connect to
your PC
The Streamium System may not connect to the PC
because
If ‘Choose your wireless network’ appears
Several wireless networks or one encrypted network are
available.
– a connection error has occurred. Press PC LINK again.
– you have not yet installed the Philips Media Manager
software on your PC.
1 Press 4 or 3 repeatedly to select the network name of
your PC.
If the network name of your PC does not appear, press
the red button (SUBTITLE) on the remote control to select
manual and continue with “If ‘Enter wireless network
name (SSID)’ appears.”
– the IP address of the Streamium System and that of your
PC are not in the same subnet.
– the PC is switched off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Internet and PC Link
C)Wired home network with a
If ‘An IP address could not be obtained
automatically.Would you like to enter your
network settings manually?’ appears
router
Follow these instructions if you have a home network with
a router and broadband Internet access.
1 Press the red button (SUBTITLE) on the remote control to
connect again to the Internet automatically.Always try this
solution first. If necessary, repeat this step several times.
broadband internet
router
2 If the Streamium System connects to the Internet, continue
with chapter “Registration.”
If the Streamium System does not connect to the Internet,
press the green button (ANGLE) on the remote control to
enter the IP settings manually. Please contact your Internet
service provider to get all the information you need below.
Next, you will be asked to enter
– the IP address for the Streamium System
– the netmask: Make sure all computers in your network,
as well as the Streamium System, have the same
netmask. If you are not sure, try 255.255.255.0.
– Default Gateway:The IP address of your router
– two DNS.
1 Connect ETHERNET on the Streamium System to a
LAN port of your router with the supplied ethernet cable.
2 Press INTERNET on the remote control.
If the Streamium System connects to the Internet you will
be asked to register with “My.Philips.com.” Continue with
chapter “Registration.”
Use the number buttons on the remote control to enter
each setting and press 2OK to confirm each setting.
If ‘The system could not connect to the server.’
appears
If the Streamium System does not connect to the
Internet
The Streamium System may not connect to the Internet
because
– a connection error has occurred. Press INTERNET again
to reconnect.
– the router is not connected to the Internet. Check if the
computers connected to the router have access to the
Internet.
Maybe the system does not connect to the Internet
because your Internet service provider uses a proxy.You
need to enter the proxy name and proxy port. Please
contact your Internet service provider to get this
information.
1 Press the green button (ANGLE) on the remote control if
your Internet service provider uses a proxy.
– the IP settings are not correct. Continue with “If ‘An IP
address could not be obtained automatically.Would you
like to enter your network settings manually?’ appears.”
– your Internet service provider is using a proxy. Continue
with “If ‘The system could not connect to the server.’
appears.”
2 Use the number buttons to enter the proxy name. Next,
press 2OK.
3 Use the number buttons to enter the proxy port. Next,
press 2OK.
➜ The Streamium System tries to connect to the Internet.
PC LINK connection
G
After the Streamium System has connected successfully to
the Internet, press PC LINK to connect to the PCs in your
network.
The Streamium System may not connect to the PC
because
– a connection error has occurred. Press PC LINK again.
– you have not yet installed the Philips Media Manager
software on your PC.
– the PC is switched off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Internet and PC Link
D) PC only with a network
interface (Ethernet) card
Follow these instructions if you want to connect the
Streamium System directly to your PC without using a
wireless connection.
cross over
ethernet cable
1 Connect ETHERNET on the Streamium System to the
ethernet jack of the PC with a cross over ethernet cable
(not supplied).
Only use a cross over ethernet cable to connect the
Streamium System directly to the PC.
2 If necessary, switch on your PC.
3 Wait for 10 seconds, then press PC LINK on the remote
control.
➜ If the Streamium System connects to the PC, the
computer name of your PC will be displayed.
If the Streamium System does not connect to
the PC
The Streamium System may not connect to the PC
because
– a connection error has occurred. Press PC LINK again.
– you have not yet installed the Philips Media Manager
software on your PC.
– the PC is switched off.
– the IP address of the Streamium System and that of your
PC are not in the same subnet.
Download from Www.Somanuals.com. All Manuals Search And Download.
Internet and PC Link
Registration
Reviewing and changing network
settings
When the Streamium System connects to the Internet for
the first time, you will be asked to enter your email address.
The Streamium System tries to connect automatically to
your network. In case of any problems or after changing
your network, you can change/review the settings of your
network here.
1 Use the number buttons on the remote control to enter
your email address. If you mistyped, press 1 to delete the
character you have entered.
1 If necessary, press INTERNET or PC LINK. Next, press
0
To exit without registering, press 9.
SYSTEM MENU.
Note: Internet services will be available only if you register.
2 Press 4 repeatedly to select Network. Next, press 2.
2 Next, press 2OK to send your email address.
➜ Within a short time, you will receive an email with
instructions on how to create your user´s account at
“My.Philips.com.”
3 Press 4 or 3 repeatedly and select
– NetworkType: to switch between a wired and a
wireless network,
– Network Config.: to enter the network settings of
your network (IP address, netmask, gateway and DNS),
– Wireless Config.: to enter the settings of your
wireless network (network name (SSID), channel
number…)
– Encryption Config.: to switch WEP encryption on/off
and to enter the encryption keys
– Proxy Config.: to enter the proxy name and proxy
port
– Network Info.: to review the network settings
(IP address, netmask, …),
– Wireless Info.: to view information about the wireless
network (network name, signal level, MAC address of
the wireless card in your Streamium System, …).
3 Create the user´s account at “My.Philips.com.”
4 Next, press INTERNET on the the remote control to
connect to the Internet.
➜ The available media types (music, video, …) appear.
About “My.Philips.com”
To activate online services, every owner of a Streamium
System has to register with My.Philips.com.This website
allows you to:
– select and manage online media services
– manage your Internet favorites
– add music streams (currently MP3, MP3pro) to the
Streamium System that are not offered through the
available Internet service providers
– find links to background information and online support
– download PC Link software
4 Next, press 2 to enter the selected menu.
– purchase media
Prerequisites for My.Philips.com:
– a Streamium System
– a computer
– access to the Internet
– an Internet browser
– an email address
To access My.Philips.com, open your Internet browser and
Download from Www.Somanuals.com. All Manuals Search And Download.
Internet and PC Link
Internet services
PC LINK
The Internet is a rapidly evolving and changing medium.
Available media services and media service providers may
change with time.This manual gives a rough overview on
how to select a media service. Please visit “My.Philips.com”
for the latest list of services and service providers.
With PC LINK you get access to the media files (music,
pictures, video) stored on the PCs of your home network
and play them on your Streamium System. Select the media
files directly on the Streamium System.
For the latest information on the supported media formats
please visit “My.Philips.com.”
1 Press INTERNET on the remote control.
➜ The available media types (music, video, …) appear.
To use PC LINK
– your PC must be switched on.
2 Press 3 or 4 to select a media type. Next, press 2.
➜ The available service providers for the selected media
type appear.
– the Philips Media Manager software must be installed on
the PCs of your home network. Please refer to the
installation guide of the Media Manager software for
installing the software and making media files of your
PCs available to the Streamium System.
3 Press 3 or 4 to select a service provider. Next, press 2.
➜ The following menus will depend on the service provider.
For example, you may select among different categories
of music or video clips.
1 Press PC LINK to connect to the PCs of the network.
➜ The PCs of your home network on which you installed
the Philips Media Manager software appear.
4 Press 2 to enter a category. Press 3 or 4 to select a
service (e. g. an Internet radio station …). Next, press 2OK
to start the selected service.
Notes:
If No PCs foundappears, the Streamium System has not
been able to connect to the PCs. Repeat step 1 until the unit
connects properly or check your network settings.
If you do not use a router, only one PC will be available.
0
To go back to the previous menu, press 1.
2 Press 4 or 3 repeatedly to select a PC. Next, press 2.
➜ The available media types (music, pictures, video) on the
computer appear.
3 Press 4 or 3 repeatedly to select a media type.
Next press 2.
➜ The available media files appear.
4 Press 4 or 3 repeatedly to select a file, then press 2OK to
play it.
Download from Www.Somanuals.com. All Manuals Search And Download.
Internet and PC Link
Using the colored multifunction
buttons – SUBTITLE,ANGLE,
ZOOM and AUDIO
FAVORITES
To handle the large amount of Internet services easily, you
can add Internet services to your favorites.The favorites
feature is available for INTERNET services only.
AUX
TV
Adding a service to your favorites
1 Select an Internet service (Internet radio station, movie …).
(UN) MARK
FAVORITES
ANGLE ZOOM
VIEW
➜
indicates that the service is already a favorite.
indicates that the service is not a favorite yet.
➜
SUBTITLE
AUDIO
2 Press
(UN)MARK FAVORITES to add the service to
your favorites.
SYSTEM
MENU
DISC
MENU
0
To remove a favorite Internet service from your favorites,
select the service and press
twice within 2 seconds.
(UN)MARK FAVORITES
Note:There may be some media services that you cannot add
to your favorites.
RETURN
RESUME
The function of the colored buttons on the remote control
(SUBTITLE,ANGLE, ZOOM and AUDIO) and of the
2 multifunction buttons on the Streamium System depend
on the media type you are using.The display on theTV
screen will indicate which buttons have a special functionality.
Accessing your favorites
1 If necessary, press INTERNET.
2 Press VIEW FAVORITES to view your favorites.
To view the favorites of one media type only (e. g. music),
0
INFO!
press the red multifunction button (SUBTITLE). Press 3 or
4 repeatedly to select the media type. Next, press 2OK to
confirm.
Some Internet media service providers offer additional
information about the media that is currently playing, e. g.
the track/artist played on the selected Internet radio
station.The availability of INFO! depends on the media and
the media service provider.
3 Select any favorite and press 2OK to play it.
G
Press INFO! to receive an email from My.Philips.com with
information about the media currently played.
Notes:
The requested information is also available at your
My.Philips.com account.
If no information is available, NO INFO AVAILABLE
appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
Internet and PC Link
Recently used media services –
Selecting a user
1 Press USER to display the users of this Streamium System.
RECENT
RECENT lets you review and quickly access the media
2 Press 3 or 4 repeatedly to select a user.
services you have been using recently. RECENT displays the
last 20 media services you have been using. RECENT is
available for INTERNET only.
3 Press 2OK to confirm.
➜ The nickname of the selected user appears.
1 Press RECENT to display the media services you have used
Removing a user
recently.
1 Press 3 or 4 repeatedly to select the user you want to
remove from the unit.
2 Press 4 or 3 repeatedly to select a media service.
2 Press the red multifunction button (SUBTITLE) on the
3 Press 2OK to start the media service.
remote control to remove the user.
0
To switch RECENT off and return to the normal display,
press RECENT again.
3 Enter the password of the primary user, i. e. the user who
was the first to register this unit.
Multiple users – USER
4 Press 2OK to confirm.
You can “personalize” this Streamium System for various
users. Each user will have his own user account at
My.Philips.com, his own favorites, and get information to his
email address when pressing INFO!
➜ The user will be removed from the unit.
Notes:
You cannot remove the primary user on the unit. But you
can delete the account of the primary user at “My.Philips.com”
or change its personal data at any time.
Some features (e .g . Parental level) are only available to the
primary user of the unit.
Adding a new user
1 Press USER to display the users of this Streamium System.
2 Press the green multifunction button (ANGLE) on the
remote control to add a new user.
3 Use the number buttons to enter the email address of the
new user.
4 Press 2 OK to confirm.
5 If you entered the email address of a user already
registered with “My.Philips.com”:
Use the number buttons to enter the user´s password.
Next, press OK.
If you entered the email address of a user who has
not registered yet:
An email will be sent to the new user with further
instructions on how to register.The user will be available on
this Streamium System shortly after registration.
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc
General Information
Region Codes
When referring to this manual, remember …
DVDs must be labelled for ALL regions or for Region 1
in order to play on this system.You cannot play discs that
are labelled for other regions.
[DVD] Indicates the feature may be on some DigitalVideo
Discs.
[CD] Indicates the feature may be on some Audio
Compact Discs.
The number inside the globe refers to a region of the
world.A disc encoded in a specific region format can play
only on DVD Players that have the same region code. So, if
a disc is labelled for Region 2, you cannot play that DVD on
this Streamium System (because it is a Region 1 system).
[VCD] Indicates the feature may be on someVideo
Compact Discs.
[MP3] Indicates the feature may be on some MP3 Discs.
Playable Discs
This system will play DigitalVideo Discs (DVDs),
(Super)Video CDs, and Audio CDs.This system will also
play MP3 files (music tracks compressed with MPEG 1
Audio Layer 3 technology) recorded onto a Compact
Disc Recordable (CD-R) or a Compact Disc Rewritable
(CD-RW).
Available disc Features
Features described in this manual may not be available on
every disc. If the feature is not on the disc, you cannot use
the system to make the feature available.An “X” will appear
in the top left corner of theTV screen if you try to access a
feature that is not on the disc.
Discs having the following logos should play on this
Streamium System.
This Streamium System supports only the first session of
multi-session discs.
Important!
1)This system is designed for regular discs.
Therefore, do not use any accessories such as disc
stabilizer rings or disc treatment sheets, etc. as
offered on the market, because they may cause
jamming of the changer mechanism.
2) Do not load more than one disc into one
disc tray.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc
DVD
INTERNET
TUNER
AUX
PC LINK
TV
(UN) MARK
VIEW
FAVORITES
ANGLE
ZOOM
SUBTITLE
AUDIO
SYSTEM
MENU
DISC
MENU
RETURN
RESUME
Disc Playback [DVD/VCD/CD]
1 Press DVD on the remote control to turn on the system.
Resume [DVD/VCD]
The resume feature is available with the last five DVDs and
(Super)Video CDs you played.
2 Turn on yourTV. Set it to the correctVideo In channel.
➜ You should see the Streamium System’s blue background
screen on theTV.
1 Press 9 on the remote control to stop playback.
➜ Resume feature is activated.
➜ The next time you start playing the same disc, play will
resume at the same point at which you last stopped it.
3 Press DISC 1 (OPEN/CLOSE /) on the Streamium System
to open disc tray 1. Load your disc in the tray, with the label
facing up and the shiny side facing down. If the disc is two-
sided, ensure that the side you wish to play is facing up.
0
0
However, if you press 9 twice to stop disc playback, resume
will not be activated.The next time you start playing the
same disc, play will start at the beginning of the disc.
4 Press DISC 1 (OPEN/CLOSE /) again to close the tray.
If the resume symbol appears on theTV screen when you
reload a disc, play will resume from the point at which you
last stopped playback if you press 2 while the resume
symbol is still displayed.
0
To load the rest of the disc trays, press the respective
DISC (OPEN/CLOSE /) button.Then press the same
button again to close the disc tray.
5 Press DVD on the remote control repeatedly or rotate
SOURCE on the Streamium System to select the disc that
you want to play.
Note: Resume may not be available with some discs.
Chapter Preview [DVD]
This feature allows you to preview the first 10 seconds of
each DVD chapter.
6 If playback does not start automatically, press 2OK.
0
If DVD playback does not start automatically, a disc menu
may appear. If the title or chapter selections are numbered,
press a Number button on the remote control to select an
item. Or press 1, 2, 3, 4 to select an item for playing, then
press 2OK.
1 Press SYSTEM MENU. Next, select Toolbar ➜ View ➜
Chapter Preview.
2 Press 2 to select On. Next, press SYSTEM MENU to exit
the system menu.
➜ The first 10 seconds of every chapter will be shown.
After that, playback will stop.
0
Press ; to pause playback temporarily.To resume playback,
press 2OK.
0
To switch Chapter Preview off and continue with
7 Press 9 to stop playback.
normal playback, press 2OK.
Note:You can only open one disc tray at a time. If the current
disc tray is open and you attempt to open another disc tray,
the first disc tray will close automatically before the second disc
tray can be opened.
Selecting next disc
0
Press DVD on the remote control or rotate SOURCE on
the Streamium System to select the next disc you wish to
play.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc
Chapter/track selection
Searching in the System Menu
In the system menu, additional search features are available:
Time Search, Fast Motion, Slow Motion.
[DVD/VCD/CD]
1 Press T briefly during playback to go to the next
track/chapter.
1 Press SYSTEM MENU.
Press S briefly to return to the beginning of the current
track/chapter.
2 Select Toolbar ➜ Search.
Time Search [DVD/VCD]
Press S repeatedly and quickly to step back to previous
tracks/chapters.
Time Search lets you choose a specific elapsed playing time
at which you want to begin disc playback.
2 To go directly to any track/chapter during playback, press
the number buttons to enter the track/chapter number.
➜ The System Menu Bar may appear briefly. It will
disappear once the new track/chapter starts to play.
1 Select Time.
➜ Playback will pause.
➜ A time edit box will appear, showing the elapsed playing
time of the current disc, or the point at which the disc is
currently.
Make sure the track/chapter number you enter is available
on the disc.When you enter an invalid number
➜ an “X” may appear in the top left corner of theTV
screen.
➜ the current track or Chapter will continue to play.
➜ an incorrect track/chapter may begin to play.
DVD
Stop
View
Search
Program
Toolbar
Time
Fast
Forward and Reverse Searching
[DVD/VCD/CD/MP3]
Slow
You can do a forward or reverse searching while playing
back a DVD,VCD, CD or MP3 disc.
Frame by Frame
1 On a DVD or (Super)Video CD, to search the disc at four
times the normal speed, press and hold S or T for
about two seconds during playback.To search at 32 times
the normal speed, press and hold S or T again
(DVD only).
2 Press the number buttons to enter the time at which you
want playback to begin. Enter the hour, minute, and second
from left to right in the box.
➜ The sound will be muted.
➜ Make sure the time you enter is within the total playing
time of the currentTitle/track.
On an Audio CD, to search the disc at four times the
normal speed, press and hold S or T for about two
seconds during playback. Sound will be intermittent.To
search at eight times the normal speed, press and hold
S or T again.
3 Press 2OK.
➜ Playback will start at the point you have selected after a
few seconds.
➜ The sound will be muted.
0
If you enter an invalid time, the incorrect information will
blink in the time edit box. Enter a time that is available in
the currentTitle/track and press 2OK again.
2 To end the search, press 2OK to resume playback or press
9 to stop playback.
Note:This feature is available in the System Menu as Fast.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc
Fast, Slow [DVD/VCD]
1 Select the speed:
Repeat [DVD/VCD/CD]
You may play a chapter, track, title, or entire disc repeatedly.
Fast: -32x, -8x, -4x (backward), or 1x, 4x, 8x, 32x (forward).
-32x, 32x … DVD only.
1 During playback, press REPEAT on the remote control
repeatedly to choose a repeat mode.
Slow: -1, -1/2, -1/4 or -1/8 (backward), or 1/8, 1/4, 1/2 or 1
(forward).
➜ Sound will be muted during Fast (Slow) Motion playback.
0
0
0
To repeat the current chapter/track, press REPEAT once.
➜ REPEAT CHPTor REPEAT TRKwill appear on the
display of the Streamium System.
0
Press ; on the remote control to pause the picture.
To repeat the current title, press REPEAT repeatedly until
REPEAT TITLappears on the display of the Streamium
System.
2 To return to normal playback, press 2OK.
Notes:
Start forward Fast Motion playback simply by pressing 2
during playback. Press 2 repeatedly to choose a Fast Motion
speed.
If you reach the beginning of the disc or title during a reverse
search, regular playback will resume automatically.
To repeat the entire disc, press REPEAT repeatedly until
REPEAT DISCappears on the display of the Streamium
System.
2 To cancel repeat playback, press REPEAT repeatedly until
REPEAT OFFappears on the display of the Streamium
System.
Still Picture/Frame-by-Frame
Playback [DVD/VCD]
Notes:
This feature allows you to view individual frames as still
pictures during playback.
Repeat can only be used for the selected disc tray.
Repeating more than one disc tray is not possible.
1 During playback, press ; on the remote control.
➜ A still picture will appear on theTV screen.
Shuffle [DVD/VCD/CD]
On a DVD, this shuffles the playing order of chapters within
a title, if the title includes more than one chapter. On an
Audio CD and (Super)Video CD, activating Shuffle will play
all the tracks in random order.
2 To advance the still picture one frame at a time, press ;
repeatedly.
3 To resume normal playback, press 2OK.
Notes:
1 Press SHUFFLE on the remote control.
➜ SHUFFLEwill appear briefly on the display of the
Streamium System.The tracks or chapters will begin
playing in random order.
You can also pause the picture by pressing 3 during
playback.
Frame-by-Frame playback is also available in the System
Menu.
2 To return to normal order playback, press SHUFFLE again.
➜ Regular playback will resume from the current
track/chapter.
➜ SHUFFLE OFFwill appear briefly on the display of the
Streamium System.
Notes:
Shuffle can only be used for the selected disc tray.
Shuffling more than one disc tray is not possible.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc
Program [DVD,VCD, CD, MP3]
Reviewing / Deleting programmed tracks
Playlist allows you to view the tracks, chapters or titles of
your program.
Program allows you to play your favorite titles/chapters or
tracks/indexes in the order you select.
1 Press 4 repeatedly to select Playlist. Next, press 2.
DVD
Stop
Program View
Program
2 Press 3 or 4 repeatedly to scroll through the tracks,
Toolbar
chapters, or titles of your program.
0
To delete a track, chapter or title from your program, press
3 or 4 repeatedly to select the track, then press 2OK.
➜ The selected track, chapter or title will be deleted from
your program.
Program
Tracks
Playlist
Clear all
3 Press 1 to exit the menu.
Note: Playlists generated on a computer and stored on the
CD-ROM are not supported.
Use ≠ or to select other options, = to enter the option
Clearing the entire program
1 Press 4 repeatedly to select Clear all.
1 Press SYSTEM MENU.
2 Select Toolbar ➜ Program.
2 Press 2 to clear the entire program.
➜ Cleared will be displayed and the program will
be cleared.
Programming tracks/chapters/titles
1 To program your favorite tracks, chapters, or titles, press
4 repeatedly to select Tracks. Next, press 2.
2 Press 3 or 4 to select the desired track, chapter, or title,
then press 2OK.
➜ The selected track, chapter, or title will be stored.
0
To store other tracks, chapters or titles, repeat step 2.
3 Press 1 to exit the menu.
Playing a program
1 Press 3 to select Program.
2 Press 2 repeatedly to select On. Next, press 2OK.
➜ FTS on (Favorite track selection) appears.
Your program will play.
0
To return to normal playback, select Toolbar ➜
Program ➜ Program. Press 2 repeatedly to select off.
Next, press 2OK.
➜ FTS off appears.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc
Disc Menu [DVD]
1 Press DISC MENU on the remote control.
➜ If the current title of the current disc has a menu, the title
menu will appear on the screen.
Camera Angle [DVD]
Some DVDs include scenes recorded from different angles.
You can watch these different angles if the angle symbol
F ANGLE appears during DVD playback. If the DVD was
not recorded with different angles, this feature is not
available. Check the DVD case first to see if multiple angles
are available.
➜ Otherwise, the main DVD disc menu will appear.
The menu may list camera angles, spoken language and
subtitle options, chapters for the title, or other disc
features.
1 During DVD playback, F ANGLE will appear at the top
of theTV screen if multiple angles are available.
2 Press 1 2 3 4 on the remote control to select the desired
items in the menu, then press 2OK.
2 Press ANGLE on the remote control during DVD playback.
➜ The available angles will appear.
3 If you do not start playback from the menu, press
DISC MENU to exit.
3 Press ANGLE or 4 or 3 repeatedly to select the angle
from which you want to watch the current scene.
Audio [DVD,VCD]
4 Press 2OK to exit.
Some DVDs are recorded in different languages.You may
be able to hear the same movie dialog in English, French,
Spanish, etc.
Note:Angle is also available in the System Menu.
Zoom [DVD]
1 Press AUDIO on the remote control during DVD playback.
This feature lets you enlarge the video image during
playback and pan through the enlarged image.
2 Press AUDIO repeatedly within five seconds to see the
different languages available. Or press 3 or 4 to see the
different languages.
1 Press ZOOM on the remote control during playback.
➜ Four arrows and a yellow dot appear on theTV screen.
➜ The language you select will be audible in a few seconds.
Zoom 4
3 Press 2OK to exit.
Note:Audio is also available in the System Menu.
Subtitles [DVD]
Some DVDs include subtitles in different languages.
You can choose subtitles only if they are available on
the DVD.
1 Press SUBTITLE on the remote control during DVD
playback.
Use ≠=+ to pan, OK to zoom in, RETURN to zoom out, ZOOM
key to exit.
2 Press SUBTITLE repeatedly within five seconds to see
the different subtitle languages. Or press 3 or 4 to see
the different subtitle languages.
2 While the arrows and the yellow dot are displayed:
Press 2OK repeatedly to select the zoom factor: Zoom 1,
Zoom 2, Zoom 4, Zoom 8.
➜ The language may be abbreviated or numbered.
➜ Subtitles will appear after a few seconds.
Press 1 2 3 4 to move to the left, right, top, or bottom of
the picture.
3 Press 2OK to exit.
Note: Subtitle is also available in the System Menu.
3 Press ZOOM to exit.
0
To return to normal playback, press ZOOM. Next, press
2OK repeatedly to select Zoom 1. Press ZOOM again.
Note: Zoom is also available in the System Menu.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc
Selecting the menu language,
Default Audio (DVD)
Select the audio language you prefer whenever you play
any DVD. If the default language is not available on the
DVD, the first audio language on the disc will be selected.
country, audio language and
subtitle language
These features are only available when DVD is selected.
G
Press 3 or 4 to select the desired default audio language,
then press 2OK.
1 Press SYSTEM MENU on the remote control.
2 DVD: Select Setup ➜ Language.
Default Subtitle (DVD)
Select the subtitle language you prefer whenever you play
any DVD. If the default subtitle is not available on the DVD,
the first subtitle on the disc will be selected.
DVD
Stop
Language View
Program
Setup
Menu Language
Bahasa Melayu
English
G
Press 3 or 4 to select the desired default subtitle language,
then press 2OK.
Menu Language
Country
NTSC
Español
Playback Control (PBC) [VCD]
This feature is available only for (Super)Video CDs
compatible with PBC. (Super)Video CDs with Playback
Control offer additional features. Check the (Super)Video
CD case for details.
Français
Português
Default Audio
Default Subtitle
Use or ≠ to select other options, = to enter the option
Switching PBC on/off [VCD]
Menu Language [DVD,VCD, CD, MP3]
Select your preferred language for the System menu.
1 Press SYSTEM MENU on the remote control.
2 Select Setup ➜ Features ➜ PBC.
G
G
Press 3 or 4 to select the desired language , then press
2OK to confirm.
3 Press 2 repeatedly to switch PBC on or off.
Next, press 2OK.
Country [DVD,VCD, CD, MP3]
Select the country where this Streamium System is used.
Note: If a (Super) Video CD does not play, set PBC to Off.
Playing a (Super)Video CD with PBC
1 Load a (Super)Video CD with PBC and press 2OK.
➜ The (Super)Video CD will show instructions or options
on theTV screen.
Press 3 or 4 to select the country, then press 2OK to
confirm.
2 Use the remote control buttons as directed by the (Super)
Video CD.
0
0
To return to a previous menu, press RETURN.
If a PBC menu has titles, select a title directly by pressing
the number buttons on the remote control.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc
Playing MP3 discs
1 Insert a disc with MP3 files.
MP3 is a compression method that makes digital music files
up to 10 times smaller without losing significant sound
quality. MP3 is common on the Internet, letting you transfer
tracks to your computer and onto a CD Recordable or
CD Rewritable.
➜ It may take the Streamium System several seconds to
recognize the MP3 disc. MP3 text may appear on theTV
screen or the display of the Streamium System.This
could be the song title, artist name, track number, etc.,
depending on how you recorded the MP3 files.
MP3 files are recorded at a certain bit rate or speed. For a
good sound quality a bit rate of 128 kbps or higher is
recommended.
MP3
2 Play
Audio Menu
Track
This system supports the following formats:
– File names ending in .mp3
– Names of albums, artists, etc., with a maximum of
30 characters
– Maximum nested directory of eight levels
– Sampling frequencies: 32 kHz, 44.1 kHz, 48 kHz
– Bit-rates: 32-320 kbps
1 Love
2 People
3 Peace
4 Sunshine
5 Wind
6 Storm
7 Air
NTSC
– Multisession discs, if finalized
Use ≠ or to change values, + or = for other lists.
The following formats are not supported:
– File names ending in .wma, .aac, .dlf, .m3u, and .pls
– Chinese file names
2 Press 3 or 4 or use the number buttons to select an
album.
– unfinalized discs
– discs recorded in UDF format
3 If you want to play the selected album, press 2OK.
If you want to play a track of the album, press 2 to enter
the selected album. Press 4 or 3 repeatedly or use the
number buttons to select a track. Next, press 2OK to play
the selected track.
0
To skip to another track, press 3 or 4 or use the number
buttons.
0
0
To search within an MP3 track, press S or T.
To select an available repeat option, press REPEAT
repeatedly.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc
Playing picture CDs
With the Streamium System you can play Kodak Picture CDs
and your own CD-R(W)s with JPEG pictures (.jpg, jpeg).
1 Insert a disc with JPEG pictures.
➜ It may take the Streamium System several seconds to
find the pictures.
➜ A preview of 4 pictures will be displayed.
0
To see the next 4 pictures, press T. For the previous
4 pictures, press S.
2 Press 1, 2, 3 or 4 to select a picture.
3 Press 2OK to display the picture.
➜ The selected picture will be displayed.
0
To skip to the previous or next picture, press S or T.
Note: Some pictures may appear distorted.
Rotating a picture
You can rotate a picture in 90 degree steps. Rotate only
affects the selected picture.
1 Select a picture and press 2OK to display the picture.
2 Press SYSTEM MENU.
3 Select Toolbar ➜ View ➜ Rotate.
4 Press 2 to enter the menu. Next, press 1 or 2 to select
the rotation angle.
5 Press 2OK to confirm.
➜ The current picture will rotate.
6 Press SYSTEM MENU to exit the menu.
Playing a slide show
Play all the pictures of the inserted disc in sequence.
1 Select a picture and press 2OK to display the picture.
2 Press 2OK again to display all pictures of the inserted disc
in sequence.
0
To adjust the time each picture will appear on the
TV screen, press SYSTEM MENU on the remote control
and select Toolbar ➜ Slideshow ➜ PictureTime.
Select Slow, Medium, or Fast. Next, press SYSTEM MENU to
exit the menu.
3 To stop the slide show, press 9.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Access Control
Access Control [DVD]
Change PIN
Some DVDs may not be suited for children.With Access
Control you can limit the scenes to be shown.This feature
will not work if the disc is not provided with access control
information. Philips cannot guarantee the availability of
Access Control with all discs, and therefore denies any
liability associated with unintended viewing of discs. Make
sure your discs play according to your Access Control
settings before you allow children to access to the Streamium
System.
1 Use the number buttons to enter the current Pin.
➜ Enter New Pin appears.
2 Use the number buttons to enter the new Pin.
➜ Confirm Pin appears.
3 Enter the new Pin again to confirm it.
➜ The Pin code is changed.
Note: Sometimes, the system will ask you to enter your code
twice to confirm the code.This is normal.
1 Press SYSTEM MENU on the remote control.
Disc Lock
2 DVD: Select Setup ➜ Access.
Use Disc Lock to disable viewing of a specific disc,
regardless of its rating.A DVD must be in the disc tray.
DVD
Stop
1 Press 2 repeatedly to select
Access
➜ On: Disc Lock is switched on. Locked discs will not play
unless you enter your four digit code.
➜ Off: Disc Lock is switched off.
Setup
Enter PIN
* * * *
2 Next, press 2OK.
Parental Level
Change PIN
Disc Lock
Note: Lock/unlock each side of two sided DVDs and each
volume of multi-volume (Super) Video CDs.
If you forget your Pin
1 When asked to enter the PIN code, press 9.
Use or ≠ to select other options, = to enter the option
2 Press DVD repeatedly to select a disc tray with no disc.
3 Press SYSTEM MENU.
3 Press 4 to select Enter PIN. Next, press 2.
4 Use the number buttons to enter the four digit code.When
4 Select Setup ➜ Acess ➜ Enter PIN. Next, press 2.
using the Streamium System for the first time, enter “0000.”
5 Press 9 4 times.
0
To exit the menu without entering the PIN code, press
SYSTEM MENU.
➜ Not possible now appears.
➜ Enter New Pin appears.
5 Press 4 repeatedly to select either Parental Level,
Change PIN or Disc Lock. Press 2 to enter the selected
menu.
6 Use the number buttons to enter the new Pin code.
➜ Confirm Pin appears.
7 Enter the new Pin code again to confirm it.
Parental Level
➜ The Pin code is changed.
DVDs may contain alternative scenes that conform to the
Parental Level, or movie rating, that you select.The Parental
Level may apply to the complete disc or to certain scenes
on the disc. Follow the steps below to set the Parental
Level at which you want the discs to play.
G
Press 3 or 4 or the number buttons (0-8) to select a
rating, then press 2OK.
0
Select “0” (– –) to deactivate Parental level. Or choose a
rating between 1-8; discs or scenes with the same rating or
lower will play. Higher rated discs or scenes will not play
unless you enter your four digit code. Follow the directions
given by the disc to enter your code and start playback.
Note:The rating numbers compare to standard U.S. movie
ratings as follows: 7 for NC-17; 6 for R; 4 for PG-13; 3 for PG,
and 1 for G.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu – Picture settings
Adjusting the Picture Settings
Sharpness
This submenu allows you to adjust the settings for color,
brightness, contrast, sharpness, saturation and video shift.
These features are only available when DVD is selected.
G
Press 1 or 2 to adjust to the desired picture sharpness,
then press 2OK.
Saturation
1 Press SYSTEM MENU on the remote control.
G
Press 1 or 2 to adjust the color saturation, then
press 2OK.
2 DVD: Select Preferences ➜ Picture.
Video Shift
Color Settings
Use this feature to center the picture horizontally on the
TV screen, or “shift the video” from left to right.
You can select predefined color settings or make your own
personal color settings.Although similar to adjusting
Brightness, Contrast, etc. on yourTV, these settings affect
the picture the Streamium System sends to theTV.
G
Press 1 or 2 to center the picture on yourTV screen, then
press 2OK.
DVD
Stop
Picture
Preferences
Color settings
Personal
Colour settings
Brightness
Contrast
Rich
NTSC
Natural
Soft
Animation
Sharpness
Use or ≠ to change the values, OK to confirm, + to leave the
sub-menu.
G
Press 3 or 4 to select Rich, Natural, Soft, Animation
or Personal, then press 2OK.
You may want to play a disc for a few minutes in each
setting to decide which you prefer.
If you selected Personal, adjust the brightness, contrast,
sharpness and saturation settings manually.
Brightness
G
G
Press 1 or 2 to adjust to the desired picture brightness,
then press 2OK.
Contrast
Press 1 or 2 to adjust to the desired picture contrast,
then press 2OK.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu – Audio settings
Night Mode
Digital Output
Night mode reduces the volume differences between loud
and quiet passages.At night, you can enjoy surround effects
at low volume without disturbing your children or
neighbors. Night mode is available only for Dolby Digital
and MPEG multi-channel signals and only if supported by
the source material (e. g. a movie).
Adjust Digital Output if you have connected the Streamium
System´s DIGITAL OUT to external digital equipment.
1 Press SYSTEM MENU on the remote control.
2 DVD: Select Setup ➜ Audio Menu ➜ Digital Output.
INTERNET, PC LINK: Select Audio ➜ Digital Output.
1 Press SYSTEM MENU on the remote control.
3 Press 3 or 4 to select
– Off if you do not use DIGITAL OUT in your
connections.
2 DVD: Select Preferences ➜ Sound ➜ Night Mode.
INTERNET, PC LINK: Select Audio ➜ Night Mode.
– PCM only if you use DIGITAL OUT in your
connections, but the Stereo equipment does not include
a built-in digital multi-channel decoder.
– All if you have connected the Streamium System to
Stereo equipment that has a built-in multi-channel
decoder.
DVD
Stop
View
Sound
Program
Preferences
Night mode
Analogue Output
ClearVoice
off
on
4 Next, press 2OK to confirm.
Use = to toggle the value, ≠ or to move to other options.
3 Press 2 repeatedly to switch Night Mode on or off. Next,
press 2OK to confirm.
Analogue Output
This feature is similar to selecting the surround sound with
SURROUND on the remote control.
1 Press SYSTEM MENU on the remote control.
2 DVD: Select Preferences ➜ Sound ➜ Analogue
Output.
INTERNET, PC LINK: Select Audio ➜ Analogue
Output.
3 Press 4 repeatedly to select Multi-channel, Hall or
Stereo. Next, press 2OK to confirm.
Note: If you connected any equipment (e. g. a tape deck) to
LINE OUT on the Streamium System and the equipment is
suited for stereo signals only, set Analogue output to
Stereo.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu – Audio settings
Speaker layout, speaker distances
and volume balance
Speaker distances and volume balance
Instead of selecting a speaker layout, you can set the
distances between the speakers and your listening position
and the volume balance between the speakers.
For optimal multi-channel sound experience, the Streamium
System can take the arrangement of your speakers and
your listening position into account. Select from different
speaker layouts or set the speaker distances and the
volume balance between the speakers individually.
To perform these settings, press SYSTEM MENU on the
remote control and select
DVD: Setup ➜ Speakers,
When DVD is selected, the speaker layout is not available.
But if you select a speaker layout when INTERNET,
PC LINK or AUX is selected, this setting will also be valid
for DVD.
INTERNET, PC LINK: Audio ➜ Speaker Layout ➜
Personal.
Speaker layout
1 Press AUX (or INTERNET or PC LINK) on the remote
control.
2 Press SYSTEM MENU on the remote control.
3 Select Audio ➜ Speaker Layout. Next, press 2 to enter
the menu.
4 Press 4 or 3 to select the speaker layout which resembles
the speaker arrangement in your home (Rectangular 1,
Rectangular 2, Trapezoid 1, Trapezoid 2) or select
Personal to adjust the speaker distances and the volume
balance individually.
5 Press 2 to enter the selected speaker layout. Next, use
1, 2, 3, 4 to select your listening position in the layout.
6 Press 2OK to confirm.
7 Press SYSTEM MENU to exit the system menu.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu – Additional features
Help Line and Status window
Sleep timer
These features are only available when DVD is selected.
1 Press SYSTEM MENU.
The sleep timer (Smart Power Off) enables the Streamium
System to switch automatically to standby 20 minutes after
a disc or an online service has stopped playing if no other
activities have been performed.
2 DVD: Select Preferences ➜ Features.
Help Line
When INTERNET or PC LINK is selected, the “Sleep timer”
feature is called “Smart Power Off.”
Set Help Line to On if you want to see helpful
information in the System Menu.When you select an item
in the System Menu, an explanation will appear at the
bottom of theTV screen.
1 Press SYSTEM MENU on the remote control.
2 DVD: Select Setup ➜ Features ➜ Sleep timer.
INTERNET, PC LINK: Select Preferences ➜ Smart
Power Off.
DVD
Stop
Features View
Program
3 Press 2 repeatedly to switch the sleep timer on or off.
Preferences
Next, press 2OK to confirm.
Help line
Adjusting the display brightness
1 Press SYSTEM MENU on the remote control.
Status Window
2 INTERNET, PC LINK: Select Preferences ➜ Dim Level.
Helpful text will appear here if Help Line is On.
3 Press 1 or 2 to select one of the levels for the display
brightness.
4 Next, press 2OK to confirm.
G
Press 2 repeatedly to switch Help Line on or off, then
press 2OK to confirm.
Online upgrade
The system checks if the latest software is installed on your
Streamium System. For this feature, you need broadband
Internet access.This feature is only available when
INTERNET or PC LINK is selected.
Status window
The Status window may indicate when the disc tray is
opening or closing, what type of disc is loaded, and total or
remaining disc playback time.
1 Press SYSTEM MENU on the remote control.
G
Press 2 repeatedly to switch Status window on or off, then
press 2OK to confirm.
2 INTERNET, PC LINK: Select Online Upgrade.
Resetting the Streamium System
When resetting the Streamium System, you will lose all
your settings (network settings,TV settings, etc.).After
resetting do not forget to perform theTV settings of
chapter “Settings for theTV.”
1 Press SYSTEM MENU.
2 INTERNET, PC LINK: Select Reset settings.
Next, press 2.
➜ Do you want to delete all settings appears.
3 Press the red button (SUBTITLE) to confirm.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner
DVD
INTERNET PC LINK TUNER
Automatic Preset Programming
1 PressTUNER on the remote control to selectTUNER.
AUX
TV
2 Press and hold
VIEW FAVORITES for 5 seconds.
➜ AUTO PROGRAM FAVORITE STATIONS?is displayed.
(UN) MARK
FAVORITES
ANGLE ZOOM
VIEW
SUBTITLE
AUDIO
3 Press the red button (SUBTITLE) on the remote control to
select YES.
SYSTEM
MENU
DISC
MENU
➜ AUTO PROGRAM IN PROGRESS...is displayed.
➜ All available radio stations with sufficient signal strength
will be stored automatically.
➜ When all the available radio stations are stored or the
memory for 40 presets is used, the last preset radio
station will be played.
RETURN
RESUME
To stop storing the automatic preset
G
Press 9.
Tuning to radio stations
1 PressTUNER on the remote control to selectTUNER.
Storing favorite radio stations
manually
➜ The current radio frequency will appear on the display.
➜ If an FM station is received in stereo,
is displayed.
You can store up to 40 favorite radio stations in the
memory.
=
2 PressTUNER on the remote control again to select the
desired waveband: FM or AM.
1 Tune to your desired radio station (refer to “Tuning to radio
stations”).
3 Press and hold 1 or 2 on the remote control until the
frequency indication starts to change, then release.
➜ SEARCHING...will be displayed until a radio station
with sufficient signal strength is found.
2 Press
(UN)MARK FAVORITES on the remote control.
➜ The current station will be stored in the next available
preset number.
➜
will appear at the side of the display.
4 If necessary repeat step 3 until you find the desired radio
station.
0
Repeat steps 1–2 to store other radio stations.
To tune to a weak station
Notes:
Press 1 or 2 on the remote control briefly and repeatedly
until optimal reception is achieved.
The favorites function forTUNER is not user dependent.The
same favorites list applies for all users.
If you attempt to store more than 40 preset radio stations,
NO MORE FAVORITES CAN BE ADDEDis displayed.
Selecting a favorite radio station
1 Press 3 or 4 on the remote control to select the desired
preset radio station from the favorite list.
2 Press 2OK on the remote control to confirm.
➜ The preset number, radio frequency, and waveband are
displayed.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner
Deleting a favorite radio station
1 Press 3 or 4 on the remote control to select the desired
preset radio station from the favorite list.
2 Press
(UN)MARK FAVORITES on the remote control.
➜ ERASE SELECTED RADIO STATION?is displayed.
3 Press the red button (SUBTITLE) on the remote control to
delete the radio station.
➜ The radio station continues to play but has been deleted
from the favorites list.All following favorite radio stations
will decrease their preset number by one.
Deleting all favorite radio
stations
1 WhileTUNER is selected, press and hold
(UN)MARK
FAVORITES for more than 5 seconds.
➜ DO YOU WANT TO DELETE ALL TUNER FAVOURITES?is
displayed.
2 Press the red button (SUBTITLE) on the remote control to
confirm.
➜ All the preset stations will be deleted.
Changing the order of favorite
radio stations
1 Press 3 or 4 on the remote control to select the desired
preset radio station from the favorite list.
2 To move the radio station down in the favorites list, press
the red button (SUBTITLE) on the remote control.
To move the radio station up in the favorites list, press the
green button (ANGLE) on the remote control.
0
If necessary repeat steps 1–2 for other radio stations.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING
Under no circumstances should you try to repair the unit yourself as this
will invalidate the warranty. Do not open the unit as there is a risk of
electric shock.
If a fault occurs, first check the points listed before taking the unit for
repair. If you are unable to solve a problem by following these hints,
consult your dealer or service center.
Problem
Solution
Disc does not playback.
– Make sure the correct program number (channel number) for the Streamium
System has been selected on theTV.
– Make sure the Streamium System and theTV are connected properly.
– Make sure the disc is not scratched or dirty. Replace or clean the disc.
– Make sure the disc has been inserted, printed side up.
– Make sure you have inserted the right disc type: DVD, (Super)Video CD,
Audio CD, CDR(W) or MP3-CD.
– Make sure the region code of the DVD matches the Streamium System.
– Change the Parental level (See “Access control”).
– Press SYSTEM MENU to exit the system menu.
Cannot activate some features,
such as angles, subtitles or
multi-language Audio.
– The features may not be available on the disc.Try another disc.
No sound or distorted sound
– Adjust the volume.
– Check the speaker connections and settings.
– Disconnect the headphones.
– Press 2OK to resume normal playback.
– Press the corresponding source button on the remote control (DVD,
INTERNET, …) to choose the source you want to hear through the
Streamium System.
No sound from the center and/or
surround speakers.
– Make sure the center and surround speakers are connected correctly.
– Press SURROUND on the remote control to select another surround effect.
No digital surround sound
– Make sure the selected source (inserted disc, Internet media, …) supports
digital surround sound (Dolby Digital, DTS, MPEG).
– Make sure external exquipment that plays digital surround sound is
connected to DIGITAL IN.
Radio reception is poor.
– If the signal is too weak, adjust the antenna or connect an external antenna
for better reception.
– Place the antenna farther away from other equipment (TV,VCR, digital
equipment, …) that may disturb radio reception.
– Increase the distance between the Streamium System and yourTV orVCR.
The remote control does not function
properly.
– Press the desired source button on the remote control (DVD,
INTERNET, …), then press the desired function button (e. g. 2OK, T).
The Streamium System does not
respond to any of the buttons,including
the standby button.
– Unplug the power cord and wait at least 10 seconds before reconnecting
the unit.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Solution
VCR or other recording equipment
connected to the Streamium system
does not record sound correctly
– Press SURROUND repeatedly to select STEREO.
– With equipment connected to DIGITAL OUT, make sure the setting of
“Digital output” in the System menu is correct. See “Digital output” on
page 41.
No picture or distorted picture
– Make sure the P-SCAN switch on the rear of the Streamium System is set
to ON if you connected a Pro Scan capableTV to COMPONENT PR PB Y on
the Streamium System.
– Press and hold the green button (ANGLE) on the remote control for
6 seconds to reset the video settings. Next, read “No picture or distorted
picture” on page 17.
– Use the CVBS connection instead of S-Video or ComponentVideo to connect
yourTV to the Streamium System. For this, press and hold the green button
(ANGLE) on the remote control for 6 seconds to reset the video settings,
disconnect the Streamium System from the power supply and follow the
instructions in “Using CompositeVideo (CVBS)” on page 14.
No video signal available on
video output jacks (CVBS, S-Video,
Component)
– When INTERNET or PC LINK is selected, a video signal will be available
either on the ComponentVideo or on the CVBS and S-Video jacks.
See “No picture or distorted picture” on page 17 to switch between
ComponentVideo and S-Video/CVBS.
Playback of Internet services skips or
interrupts
– If you share the broadband Internet access with other users, there may not be
enough broadband Internet bandwidth available to the Streamium System.
Media file (music, video or photo)
does not play or in poor quality only
– The file format of the media file may not be supported by the
Streamium System. Play a media file with a supported file format.
– The wireless reception is low. Change the position of your wireless
equipment to improve the reception.
– The media has been recorded in low quality, e. g. music files with a low
bitrate (64 kbps).
No connection to the Internet
General solutions, always try first:
– Press INTERNET again. If necessary, repeat this step several times.
– Make sure the computers in your network connect to the Internet. If they do
not, consult your network administrator or Internet service provider.
“The system could not connect to
the server.” appears
– Check if your (wireless) router and your cable modem are
connected properly to each other.
– Your Internet service provider uses a proxy. Press the green button (ANGLE)
on the remote control to enter the proxy name and the proxy port.
“An IP address could not be obtained
automatically.” appears
– If you use a (wireless) router, make sure “DHCP server” is enabled in the
configuration menu of the router.
– Press the green button (ANGLE) on the remote control to enter the
IP settings manually.
“TheWEP key you entered has
an invalid format.” appears
– All WEP keys must have the same format (either ASCII or
HEX format) and the same length (ASCII: either 5 or 13 characters,
HEX: either 10 or 26 digits).
Cannot access Internet media after
entering the email address
– After entering your email address, you will get an email with instructions on
how to create a user account. Please follow these instructions. Next, press
INTERNET on the remote control.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Solution
INTERNET, PC LINK:
Streamium System freezes
during startup
– Press STANDBY·ON to switch off the Streamium System. Next, press
INTERNET or PC LINK to switch it on again.
– If the Streamium System does not react when you press STANDBY·ON,
disconnect the Streamium System from the power supply and wait at least
10 seconds before reconnecting the Streamium System.
– If the Streamium System freezes during startup before you can see
the INTERNET or PC LINK menu and if the hints above do not help,
the Streamium System may need a reinstallation of the software:
1 Make sure the Streamium System has access to the Internet through a
wired connection. If necessary, connect the Streamium System to a free
LAN port on your router (see page 24). Do not use a wireless connection.
2 Disconnect the Streamium System from the power supply.
3 Press and hold the red button (SUBTITLE) on the remote control while
you reconnect the power cord to the power supply.
4 Follow the instructions on theTV screen or on the display of the
Streamium System to establish a connection to the Internet and to reinstall
the software of the Streamium System.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Addendum
MX6000i/37
Please take the following problems/solutions into account:
Problem
Solution
PC LINK: It takes about 2 minutes
before the Streamium System
connects to the PC
–
Your PC may assign an IP address to itself automatically
(Auto-IP).This can take some time.
Run the Philips AutoIP utility. See the chapter below.
(Windows operating system only)
PC LINK:The Streamium System
does not connect to the PC
–
The PC may not get an IP address automatically.
Run the Philips AutoIP utility. See the chapter below.
(Windows operating system only)
Using the Philips AutoIP utility
Run the Philips AutoIP utility on your PC if you have a
direct connection between the Streamium System and your
PC (case B on page 23 or case D on page 25 of the user
manual).
4 Click on the adapter which you want to use for the
communication between the PC and the Streamium System.
5 If the status of the adapter is “DHCP only”:
Click the “Enable AutoIP” button.
➜ The status changes to “DHCP/AutoIP”.
Do not run the Philips AutoIP Utility if you have a
wired or wireless home network using a base station,
router or gateway (case A on page 21 or case C on
page 24 of the user manual)
If the status of the adapter is “DHCP/AutoIP” or
“AutoIP”:
Wait until the IP address changes to 169.254.x.x.
x is a number between 0 and 255.
1 Press PC LINK on the Streamium System.
Next, click the “Lock AutoIP” button.
2 Insert the Philips Media Manager CD-ROM into the
CD-ROM drive of your PC.
➜ The PC is properly set up now.
If the status of the adapter is “Static IP”:
In this case the AutoIP utility cannot make any changes on
your computer.
Either change the network settings of the Windows
operating system to “Obtain IP address automatically” and
continue with step 4 or
Go to the folder “Software” ➜ “Tools”.
3 Double-click the “PhilipsAutoIPutility.exe” file to start the
AutoIP utility.
➜ In some cases “Auto IP” may be deactivated on your
computer completely and you will be asked if you want
to enable Auto IP on your PC. Click on “OK”. Please be
aware that your PC will restart. Continue with step 2.
➜ A list with all network adapters found on your computer
will appear.The list may include old adapters that were
not properly uninstalled.
enter a static IP on the Streamium System. For this, press
SYSTEM MENU and select Network ➜ Network Config.
6 Click the “Exit” button to exit the AutoIP utility.
7 Press STANDBY·ON to switch the Streamium System to
standby. Next, press PC LINK.The Streamium System should
connect instantly to the PC now.
Note:You can reverse the settings of the AutoIP utility by clicking
again on the corresponding button.
3103 306 1999.3
EL6593E003 VieChr0418
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Subject to modification without notice.
General
Analog audio connections
Power supply rating –––––––––––––––––––– 120V /60 Hz
Power consumption
Analog in (AUX IN,TV IN) ––––––– 500 mV – 2V / 22 kΩ
Analog out (LINE OUT) –– Stereo, 1.5V / 1 kΩ, S/N 105 dB
Active ––––––––––––––––––––––––––––––––– 118 W
Standby –––––––––––––––––––––––––––––– < 0.5 W
Dimensions (w x h x d) –––––––––––– 17.1" x 3.8" x 14.6"
Weight –––––––––––––––––––––––––––– 8.0 kg, 17.6 lbs
Video connections
Video out (ComponentVideo)
Y ––––––––––––––––––––––––––––––– 1.0Vp-p, 75 Ω
PB, PR –––––––––––––––––––––––––––– 0.7Vp-p, 75 Ω
Video out (S-VIDEO)
Amplifier
Output power
Y ––––––––––––––––––––––––––––––– 1.0Vp-p, 75 Ω
C ––––––––––––––––––––––––––––– 0.286Vp-p, 75 Ω
Video out (CVBS) ––––––––––––––––––––– 1.0Vp-p, 75 Ω
Total output power –––––––––––––––––– 450 W RMS
360 W FTC*
Stereo mode ––––––––––––––––––––– 2 x 75 W RMS
2 x 60 W FTC
Digital connections
Surround mode
Digital Input/Output SPDIF (Sony Philips digital interface)
In –––––––––––––––––––––––––– > 200 mVp-p / 75 Ω
Out –––––––––––––––––––––––––– 500 mVp-p / 75 Ω
PCM –––––––––––––––––––––––––––––– acc. IEC 60958
Dolby Digital/DTS –––––––––– acc. IEC 60958, IEC 61937
Audio DAC ––––––––––––––––––––––––– 24 bit /96 kHz
Frequency Response
Front ––––––––––––––– 2 x 75 W RMS / 60 W FTC
Center ––––––––––––––––– 75 W RMS / 60 W FTC
Surround –––––––––––– 2 x 75 W RMS / 60 W FTC
Subwoofer –––––––––––––– 75 W RMS / 60 W FTC
Total Harmonic Distortion ––––––––––– 10%, 1 kHz, 66 W
S/N ratio (unweighted) ––––––––––––––––––––– ≥ 92 dB
(A-weighted) –––––––––––––––––––––––––– 100 dBA
Crosstalk (1 kHz) ––––––––––––––––––––––––– ≥ -90 dB
44.1 kHz –––––––––––––––––––––––– 10 Hz – 20 kHz
48 kHz ––––––––––––––––––––––––– 10 Hz – 22 kHz
96 kHz ––––––––––––––––––––––––– 10 Hz – 44 kHz
*
4 Ω, 120 Hz–12.5 kHz, 10%THD
Tuner
Speaker and headphones connections
Tuning range
Front, center and rear speakers –––––––––––––––––– 4 Ω
Subwoofers ––––––––––––––––––––––––––––––––– 8 Ω
Headphone (6.3 mm, 8–600 Ω) –––– 2.8V EMF, Ri = 80 Ω
FM ––––––––––––––––––––––––– 87.5 MHz–108 Mhz
AM ––––––––––––––––––––––––– 530 kHz–1700 kHz
DVD
Antenna connections
Disc diameter –––––––––––––––––––––––– 12 cm / 8 cm
Video Decoding –––––––––––––––––– MPEG-2 / MPEG-1
Video DAC –––––––––––––––––––––––– 9 bit, 5 channels
Signal system –––––––––––––––––––––––––––––– NTSC
Video format –––––––––––––––––––––––––––– 4:3 / 16:9
Video S/N ––––––––––––––––––––––– 56 dB (minimum)
Supported disc formats –––––– DVD, DVD+R, DVD+RW,
(Super)Video CD,
FM antenna –––––––––––––––––––––––––––––––– 75 Ω
AM antenna ––––––––––––––––––––––––––––––– 300 Ω
Speakers
Front and rear speakers
System –––––––––––––––– 2 way shielded, Closed Box
Impedance –––––––––––––––––––––––––––––––– 4 Ω
Speaker drivers –––––– 2 x 3" woofers, 1 x 13⁄4" tweeter
Dimensions (w x h x d) ––––––––––– 3.7" x 11.0" x 2.8"
Center speaker
Audio CD, CD-R, CD-RW,
MP3-CD (ISO 9660)
System –––––––––––––––– 2 way shielded, Closed Box
Impedance –––––––––––––––––––––––––––––––– 4 Ω
Speaker drivers –––––– 4 x 2" woofers, 1 x 13⁄4" tweeter
Dimensions (w x h x d) ––––––––––– 17.1" x 2.9" x 2.6"
Subwoofer
INTERNET and PC LINK
Ethernet –––––––––––––––––– IEEE 802.3, 10/100 Base-T
Wireless –––––––––––––––– Wi-Fi Certified, IEEE 802.11g
Supported media formats (at the time of printing)
Music –––––––––––––––––– MP3 and MP3pro streams,
32–320 kbit/sec,
System ––––––––––––––––––––––––––––– Bass Reflex
Impedance –––––––––––––––––––––––––––––––– 8 Ω
Speaker driver –––––––––––––––––––––––– 4" woofer
Dimensions base (w x h) –––––––––––––––– 9.4" x 1.2"
Dimensions tube (w x h) ––––––––––––––– 4.5" x 37.9"
variable bit rate
Pictures ––––––––––––––––– JPEG, JPEG2000, .bmp, .gif
Video ––––––––––––––––– MPEG 1, MPEG 2, MPEG 4,
DivX 4.0/5.03
49
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITEDWARRANTY
AUDIO SYSTEM
OneYear Free Labor
OneYear Free Service on Parts
This product must be carried in for repair.
WHO IS COVERED?
You must have proof of purchase to receive warranty service.A sales
BEFORE REQUESTING SERVICE...
Please check your owner's manual for assistance. If you have additional
receipt or other document showing that you purchased the product is questions, call us at 1-800-531-0039.
considered proof of purchase.
TO GETWARRANTY SERVICE IN U.S.A.,
WHAT IS COVERED?
PUERTO RICO, OR U.S. VIRGIN ISLANDS...
Take the product to a Philips factory service center (see enclosed list)
or authorized service center for repair.When the product has been
repaired, you must pick up the unit at the center. Centers may keep
defective parts. (In U.S.A., Puerto Rico, and U.S.Virgin Islands, all
implied warranties, including implied warranties of merchantability and
fitness for a particular purpose, are limited in duration to the duration
of this express warranty. But, because some states do not allow
limitations on how long an implied warranty may last, this limitation
may not apply to you.)
Warranty coverage begins the day you buy your product. For one year
thereafter, all parts will be repaired or replaced, and labor is free.After
one year from the day of purchase, you pay for the replacement or
repair of all parts, and for all labor charges.
All parts, including repaired and replaced parts, are covered only for
the original warranty period.When the warranty on the product
expires, the warranty on all replaced and repaired parts also expires.
WHAT IS EXCLUDED?
Your warranty does not cover:
•
labor charges for installation or setup of the product, adjustment
of customer controls on the product, and installation or repair of
antenna systems outside of the product.
product repair and/or part replacement because of misuse,
accident, unauthorized repair or other cause not within the
control of Philips.
reception problems caused by signal conditions or cable or
antenna systems outside the unit.
a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.
TO GETWARRANTY SERVICE IN CANADA...
Please contact Philips at:
1-800-661-6162 (French Speaking)
1-800-531-0039 (English or Spanish Speaking)
•
(In Canada, this warranty is given in lieu of all other warranties. No
other warranties are expressed or implied, including any implied
warranties of merchantability or fitness for a particular purpose.
Philips is not liable under any circumstances for any direct, indirect,
special, incidental or consequential damages, howsoever incurred, even
if notified of the possibility of such damages.)
•
•
•
incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or
consequential damages, so the above exclusion may not apply to
you.This includes, but is not limited to, prerecorded material,
whether copyrighted or not copyrighted.)
REMEMBER...
Please record below the model and serial numbers found on the
product.Also, please fill out and mail your warranty registration card
promptly. It will be easier for us to notify you if necessary.
•
a product that is used for commercial or institutional purposes.
MODEL # ________________________________________
SERIAL # ________________________________________
WHERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where the product is
officially distributed by Philips. In countries where Philips does not
distribute the product, the local Philips service organization will
attempt to provide service (although there may be a delay if the
appropriate spare parts and technical manual(s) are not readily
available).
MAKE SUREYOU KEEP...
Please keep your sales receipt or other document showing proof of
purchase.Attach it to this owner’s manual and keep both nearby.Also
keep the original box and packing material in case you need to return
your product.
This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.
Philips, P.O. Box 520890, Miami, FL 33152, USA, (402) 536-4171
EL4965E007 / 8-02
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick use guide
MX6000i
1
Insert batteries
2
ConnectTV
COMPONENT
VIDEO IN
S-VIDEO
IN
Pr/Cr
AUDIO
OUT
Pb/Cb
Y
VIDEO IN
COMPONENT
V
I
D
E
O
I
N
S-VIDEO
IN
AUDIO
OUT
Pr/Cr
Pb/Cb
Y
V
I
D
E
O
I
N
ETHERNET
FRONT
LEFT
FRONT
RIGHT
CENTRE
CVBS
SURR
LEFT
SUB-W
LEFT
ANTENNA
AM
DIGITAL
OUT
L
FM
SURR
RIGHT
SUB-W
RIGHT
DIGITAL
IN
P-SCAN
R
AUX IN
TV IN
AUDIO
LINE OUT
S
-
VIDEO
ON
COMPONENT
OFF
VIDEO OUT
Connect the composite video input jack on theTV (labelled A/V In,Video In, Composite) to
VIDEO CVBS on the Streamium System with the supplied composite video cable (yellow).
For Component or S-Video connections, see page 14 of the user´s manual.
Connect the audio output jacks on theTV toTV IN (L/R) on the Streamium System with the
supplied RCA-style audio cable (white and red).
3
Connect speakers and antenna
Match the colors of the speaker cables and of the speaker jacks!
centre
white (red) purple
front L,
front R,
subwoofer
subwoofer
rear L
rear R
1 Connect the speaker 2 Mount the 2 front 3 Mount the 2 mini
4 Position the speakers.
cables to the base of
the subwoofers.
speakers (white,
red jack) onto the
2 subwoofers.
speaker stands onto
the 2 rear speakers
(blue, grey jack) and
connect the
corresponding
speaker cables.
ETHERNET
FRONT
LEFT
FRONT
RIGHT
CENTRE
CVBS
SURR
LEFT
SUB-W
LEFT
ANTENNA
AM
DIGITAL
OUT
L
FM
SURR
RIGHT
SUB-W
RIGHT
DIGITAL
IN
P-SCAN
R
AUX IN
TV IN
AUDIO
LINE OUT
S
-
VIDEO
ON
OFF
VIDEO OUT
COMPONENT
5 Connect the speaker cables to the Streamium System.
7 After making all other connections connect
the power cord to MAINS ~ on the Streamium
System and to the power outlet.
6 Connect the FM and the AM antenna.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Install the tuner
1 PressTUNER on the remote control.
5
Switch on theTV
1 Switch on yourTV.
6
Install the Philips Media Manager
With the installation of the Philips Media Manager software
on your computer, you can make the media files on your
computer available to the Streamium System.
2 Press and hold
VIEW FAVORITES on the remote
control for 5 seconds.
➜ AUTO PROGRAM FAVORITE STATIONS?is displayed.
2 Press AUX on the remote control of the Streamium
System.
1 Download the latest version of the Philips Media Manager
software at “My.Philips.com” or insert the supplied CD-ROM
into the CD-ROM drive of your computer.
3 Set theTV to the correct audio/video channel for the
Streamium System:A/V IN,AUX, EXT1, 2, …
➜ The Philips Streamium startup screen will appear on
theTV screen.
3 Press the red button (SUBTITLE) on the remote control to
start the installation of radio stations.
2 Double-click the “PMMSetup.exe” file to install the Philips
Media Manager software on your computer(s). During the
installation you will be asked which media files should be
added to the Philips Media Manager.
➜ It may take several minutes to search and store the radio
stations.
If you have any problems with the picture quality,
please read page 17 of the user´s manual.
7
Option A
or
Option B
You have
broadband Internet
You have
– a computer with a free USB port (USB 2.0 recommended)
– Windows 98 SE or later
– broadband Internet
m
pictur
video
usic
– a wireless base station (not included)
– computer connected to the wireless network
PC:Windows 98 SE or later,
es
With the installation of the supplied wireless USB adapter on your
computer you get a wireless connection to the Streamium System.
Then you can access the media files of your computer with your
Streamium Home Entertainment System.
Apple Macintosh: Mac OS 10.1.5 or higher
m
pictur
video
usic
es
+
supplied wireless
USB adapter
First, make sure all computers of your network connect
to the Internet and to each other.
Play online music, picture and video services with the
Streamium System
Install the supplied wireless USB adapter on your
computer
1 Press INTERNET on the remote control.
DVD
INTERNET
TUNER
AUX
PC LINK
1 Insert the installation disc of the USB adapter into the disc drive of your
➜ You will be asked to enter your email address.
computer
computer.The installation guide on the CD-ROM will start automatically.
TV
2 Use the remote control to enter your email address and press 2OK to confirm.
2 Follow the on-screen instructions on the computer. Connect the wireless
USB adapter to the free USB port on your computer when the installation guide
asks you to do so.
(UN) MARK
VIEW
FAVORITES
Example: Press O twice for “@”.To delete a character, press 1.
ANGLE
ZOOM
SUBTITLE
AUDIO
3 You will receive an email with instructions on how to create your user account
SYSTEM
MENU
DISC
MENU
at “My.Philips.com”.
computer
4 After creating your user account, press INTERNET on the remote control to
Play music, picture and video from your computer with
the Streamium System
DVD
INTERNET
TUNER
PC LINK
access online media services.
TV
AUX
RETURN
RESUME
1 Press PC LINK on the remote control.
(UN) MARK
ANGLE
VIEW
-
➜ The computer name will appear on theTV screen.
DEF
MNO
Play music, picture and video from your computer with
the Streamium System
–
ABC
JKL
TUV
.@
FAVORITES
ZOOM
SUBTITLE
AUDIO
GHI
2 Press 2OK to access music, pictures and video on your computer.
1 Press PC LINK on the remote control.
SYSTEM
MENU
DISC
MENU
PQRS
SOUND
WXYZ
➜ The available computer names will appear on theTV screen.
SURROUND
If you have trouble connecting to the computer, press PC LINK again.
See page 23 of the user´s manual for additional help.
2 Select a computer and press 2OK to access music, pictures and video on the
SHUFFLE
RECENT
INFO !
computer.
If you have trouble connecting to the Internet or to your computers,
press INTERNET or PC LINK again. See pages 21–22 in the user´s manual
for additional help.
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Select and play media
SYSTEM
MENU
DISC
MENU
SYSTEM
MENU
DISC
MENU
RETURN
RESUME
RETURN
RESUME
1 Press 3 or 4 to move up or down
3 Repeat step 1 and 2 to navigate to
the desired playable item (Internet
radio station, movie, album, track, …)
4 Press 2OK to play the playable item.
in the menu.
0
To go back to the previous (left)
2 Press 2 to enter the menu to the
menu, press 1.
right.
0
To stop playback, press 9.
9
Play a disc
SYSTEM
MENU
DISC
MENU
DVD
INTERNET PC LINK TUNER
AUX
TV
RETURN
RESUME
(UN) MARK
FAVORITES
VIEW
1 Press DVD on the remote control.
2 Press DISC 1 (OPEN/CLOSE /) to
5 Press 2OK to start playback.
open tray 1.
Some discs will start automatically.
3 Insert a disc into tray 1.
0
To skip to previous or following
chapters/tracks, press S or T
repeatedly.
4 Press DISC 1 (OPEN/CLOSE /) to
close tray 1.
4
3103 306 1988.2
EL6572E002 VieChr0411
Download from Www.Somanuals.com. All Manuals Search And Download.
PHILIPS CONSUMER ELECTRONICS NORTH AMERICA
Knoxville,Tennessee 37914-1810, U.S.A.
W
Printed in China
CLASS 1
LASER PRODUCT
3103 306 1975.3
IB 8459E003 /VieChr0415
Download from Www.Somanuals.com. All Manuals Search And Download.
|
