Register your product and get support at
19PFL3403/77
EN User manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Select your language
Automatically install channels
Fine tune channels
26
26
26
27
Contents
Exclude channels from a list
1 Notice
4
10 Troubleshooting
28
29
2 Important
Safety
5
5
6
6
11 Product information
Screen care
Environmental care
3 Your TV
TV overview
7
7
8
Remote control
4 Get started
10
10
10
10
11
11
Position theTV
Wall mount theTV
Connect the antenna cable
To connect the power cord
Insert the remote control batteries
5 Use your TV
13
13
13
13
Switch yourTV on/off or to standby
Switch channels
Adjust volume
6 Use more of your TV
Adjust picture and sound settings
Use timers
14
14
16
Create and use lists of favorite channels
17
View closed captions (subtitles)
Use child control and rating locks
18
19
7 Use your TV as a PC monitor
Configure yourTV in PC mode
23
23
23
Adjust display settings for PC mode
8 Use your TV in HDTV mode
Configure yourTV in HD mode
Adjust display settings in HD mode
24
24
24
9 Install channels
26
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
One of Philips’ leading Business Principles is to
take all necessary health and safety measures
for our products, to comply with all applicable
legal requirements and to stay well within
the EMF standards applicable at the time of
producing the products.
Philips is committed to develop, produce and
market products that cause no adverse health
effects. Philips confirms that if its products are
handled properly for their intended use, they
are safe to use according to scientific evidence
available today.
Philips plays an active role in the development
of international EMF and safety standards,
enabling Philips to anticipate further
developments in standardisation for early
integration in its products.
1 Notice
2008 © Koninklijke Philips Electronics N.V. All
rights reserved.
Specifications are subject to change without
notice.Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners.
Philips reserves the right to change products at
any time without being obliged to adjust earlier
supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other than
those specified herein, confirmation of their
validity and suitability must be obtained. Philips
warrants that the material itself does not
infringe any United States patents. No further
warranty is expressed or implied.
Copyright
Warranty
No components are user serviceable. Do not
open or remove covers to the inside of the
product. Repairs may only be done by Philips
Service Centres and official repair shops. Failure
to do so shall void any warranty, stated or
implied.
Any operation expressly prohibited in
this manual, any adjustments, or assembly
procedures not recommended or authorised in
this manual shall void the warranty.
Pixel characteristics
This LCD product has a high number of
colour pixels.Although it has effective pixels of
99.999% or more, black dots or bright points of
light (red, green or blue) may appear constantly
on the screen.This is a structural property of
the display (within common industry standards)
and is not a malfunction.
VESA, FDMI and theVESA Mounting Compliant
logo are trademarks of theVideo Electronics
Standards Association.
® Kensington and Micro Saver are registered
US trademarks of ACCO World corporation
with issued registrations and pending
applications in other countries throughout the
world.
All other registered and unregistered
trademarks are the property of their respective
owners.
Compliance with EMF
Koninklijke Philips Electronics N.V. manufactures
and sells many products targeted at consumers,
which, like any electronic apparatus, in
general have the ability to emit and receive
electromagnetic signals.
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
If placing theTV on a flat, solid surface be
sure to use only the supplied stand. Do not
move theTV if the stand is not properly
screwed to theTV.
Wall mounting of theTV should only be
performed by qualified personnel.TheTV
must only be mounted on an appropriate
wall bracket and on a wall that can safely
hold the weight of theTV. Improper wall
mounting can result in severe injury or
damage. Do not attempt to wall mount
theTV yourself.
If theTV is mounted on a swivel base or
swivel arm, ensure no strain is placed on
the power cord when theTV is swivelled.
Strain on the power cord can loosen
connections and cause arcing or fire.
Disconnect theTV from the mains and
antenna before lightning storms. During
lightning storms do not touch any part of
theTV, mains cord or antenna cable.
Be sure that you have full access to the
mains cord for easy disconnection of the
TV from the mains.
2 Important
Read this user manual before you start to use
this product.
Pay close attention to this section and follow
the safety and screen care instructions.The
product warranty does not apply if damage is
caused by failing to follow these instructions.
The model and serial number of yourTV can
be found on the back of theTV as well as on
the packaging.
•
Safety
•
•
•
Two people are required to lift and carry a
TV that weighs more than 25 kilos (55lb).
Improper handling of theTV can result in
serious injury.
•
If transporting theTV in low temperatures
(less than 5°C), open the box and
wait until theTV matches the ambient
temperature of the room before
unpacking.
•
When disconnecting theTV from the
mains, be sure to:
•
•
To avoid short circuit, do not expose the
TV, remote control or remote control
batteries to rain or water.
1
2
3
Turn off theTV, then the mains power (if
available).
Unplug the mains cord from the mains
socket outlet.
To avoid risk of fire or electric shock,
do not place theTV, remote control or
remote control batteries near naked flame
sources (e.g. lighted candles) and other
heat sources including direct sunlight.
Do not place vessels filled with water on
top of or near to theTV. Spilling water into
theTV can result in electric shock. If you
spill water into theTV, do not operate the
TV. Immediately disconnect theTV from
the power and have theTV checked by a
qualified technician.
Do not install theTV in a confined space
such as a bookcase. Leave a space of
at least 10cm (four inches) around the
TV for ventilation. Be sure air flow is not
obstructed.
Unplug the mains cord from the power
connector at the back of theTV. Always
pull the mains cord by the plug. Do not
pull the mains cord.
•
•
•
Permanent hearing loss can occur if you
use earphones or headphones at high
volumes.Though high volume may sound
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
normal over time, it can damage your
hearing.To protect your hearing, limit the
amount of time you use earphones or
headphones at high volume.
and reused.When you see the crossed-out
wheel bin symbol attached to a product, it
means the product is covered by the European
Directive 2002/96/EC:
Screen care
•
Turn off and unplug the mains cord before
cleaning the screen. Clean the screen with
a soft, dry cloth. Do not use substances
such as household cleaning agents as these
may damage the screen.
Do not dispose your used product with
household waste.Ask your dealer for
information on how to safely dispose of the
product. Uncontrolled waste disposal harms
both the environment and human health.
Disposing used batteries
The supplied batteries do not contain
mercury or cadmium. Dispose supplied and all
other used batteries according to your local
regulations.
Power consumption
TheTV consumes minimal energy in standby
mode to minimize environmental impact.Active
power consumption is displayed at the back of
theTV. For more product specifications, see the
•
•
To avoid deformations or colour fading,
wipe off water droplets as soon as possible.
Do not touch, push, rub or strike the
screen with hard objects as this may
damage the screen permanently.
•
Where possible, avoid stationary images
that remain on-screen for extended
periods of time. Examples include screen
menus, teletext pages, black bars or stock
market tickers. If you must use stationary
images, reduce the screen contrast and
brightness to avoid screen damage.
Environmental care
Recycling your packaging
The packaging of this product is intended to
be recycled. Contact your local authorities for
information on how to recycle the packaging.
Disposing your used product
Your product is manufactured with high-quality
materials and components that can be recycled
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connectors
3 YourTV
2
3
4
5
6
7
1
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
10
9
8
TV overview
This section gives you an overview of
commonly-usedTV controls and functions.
Side controls and indicators
a HDMI
HDMI for DVD player, HD digital receiver,
HD game console, PC, etc.
VOLUME
5
b VGA AUDIO
4
Mini-jack connector for PC audio when
MENU
connecting a PC via DVI-HDMI orVGA.
c VGA PC
To connect a PC.
CHANNEL
3
d YPBPR
2
POWER
Component video input withYPbPr and
Audio L/R connectors for DVD, digital
receiver or game console, etc.
1
e AV1
a Standby indicator / remote control
Composite video input to be used with
Audio L/R connectors for camcorder,
game console, etc.
sensor
b POWER: Switches theTV on from
standby or back to standby.TheTV is
not powered off completely unless it is
physically unplugged.
f TV (75
)
Antenna input
g SERV C
For software update.
c CHANNEL + / -: Switches to the next or
previous channel.
h SIDE AV
d MENU:Toggles the main menu on or off.
Composite video (side) to be used with
Audio L/R connectors for camcorder,
game console, etc.
e VOLUME + / -: Increases or decreases
volume.
i S-VIDEO
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
S-Video (side) to be used with Audio L/R
connectors for camcorder, game console,
etc.When you use the S-Video (side) for
video signals, do not use the Composite
video (side) input for video signals.
c Not used.
d SLEEP
Sets a delay after which theTV switches
to standby.
e TIMER
j Headphones
Headphone stereo mini jack.
Sets the clock and timers.
For software update.
f
g
SMART SOUND
Selects pre-defined sound settings.
Navigation keys
Navigates through the menus.
Remote control
h MENU/BACK
Toggles the menu on or off or returns to
a previous screen.
1
2
13
14
3
i VOL + / -
15
16
4
5
Increases or decreases volume.
6
7
17
18
j
Mute
Mutes or unmutes audio.
k Number buttons
Selects a channel, page or setting.
19
20
8
9
l STATUS/EXIT
Displays status information or exits the
menu.
m SAP
Selects Secondary Audio Program (SAP),
stereo or mono.
10
11
n CC
Displays closed captions settings.
12
21
o SURF
Displays a list of all channels marked as
favorite.
p TV/PC
Toggles between PC mode and the last
accessed mode.
a
Power
q
SMART PIC
Selects pre-defined picture settings.
Switches theTV on from standby or
back to standby.TheTV is not powered
off completely unless it is physically
unplugged.
r OK
Activates a selection or accesses the
menu.
b SOURCE
Selects connected devices.
s
FORMAT
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Selects a picture format.
t CH + / -
Switches to the next or previous channel.
u A/CH
Toggles between the current channel and the
last viewed channel.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Get started
This section supplements information in the
Quick Start. For information about how to
mount and install yourTV, refer to the Quick
Start.
Position theTV
Warning
• Do not insert the power plug into the wall socket
before all the connections are made.
• Large screenTVs are heavy.Two people are required to
carry and handle a large screenTV.
• Before you move theTV, disconnect the cables to
prevent breakage.
Wall mount theTV
Warning
In addition to reading and understanding the
safety instructions (see ‘Safety’ on page 5),
consider the following before positioning your
TV:
• Wall mounting of theTV should only be performed by
qualified installers. Koninklijke Philips Electronics N.V.
bears no responsibility for improper mounting that
results in accident or injury.
•
Ensure that you always have easy access to
the power cord or plug to disconnect the
TV from the power.
Screen VESA-compatible
Bolt type and
min length
size
bracket (mm)
•
If theTV is mounted on a swivel base,
ensure that no strain is placed on the
power cord when theTV is swiveled.
Strain on the power cord can loosen
connections.
(not supplied)
M4 x 10mm
19”
(48cm) 100
26”
Adjustable 100 x
Adjustable 200 x
M4 x 10mm
•
•
•
The ideal viewing distance for watchingTV
is three times its screen size.
Position theTV where light does not fall on
the screen.
Connect your devices before you position
theTV.
(66cm) 100
The minimum bolt length is 10mm. If you use
a spacer, the bolt length should be the spacer
length plus 10mm. For example, if you use a
40mm spacer, the bolt length should be 50mm
(40mm + 10mm).
Use a Kensington lock
There is a Kensington security slot at the back
of theTV. If you connect a Kensington lock
(not supplied), position theTV near a heavy or
immovable object that you can attach the cable
to.
Connect the antenna cable
Connect the antenna cable to theTV antenna
socket (75 ) at the back of theTV.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable
To disconnect theTV from the power
To connect the power cord
Disconnect theTV from the power in one of
the following ways:
Warning
•
Unplug the power cord from the power
connector at the back of theTV.
Unplug the power cord from the power
socket outlet.
• Verify that your mains voltage corresponds with the
voltage printed at the back of theTV. Do not insert the
mains cord if the voltage is different.
•
Pull the power cord by the plug; do not pull on
the power cord.
1
Locate the power connector at the back of
theTV.
The location of the power connector
varies according toTV model.
Insert the remote control
batteries
2
3
Insert the power cord fully into the power
connector.
1
2
Slide the battery cover off the back of the
remote control.
Connect the power cord plug to the
power outlet. Ensure that the cord is tightly
secured at both ends.
Insert the 2 supplied batteries (AAA). Be
sure the + and - ends of the batteries line
up with the markings inside the case.
3
Slide the cover back into position.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
• Remove the batteries if you are not going to use the
remote control for an extended period of time.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Use yourTV
CHANNEL
This section helps you perform basicTV
operations.
Switch yourTV on/off or to
standby
•
•
Press CH + / - or key in the number on
the remote control.
Press CHANNEL + / - on the side of the
TV.
Adjust volume
To increase or decrease volume
•
Press VOL + / - on the remote control or
press VOLUME + / - on the side of theTV.
To mute or unmute sound
To switch on
•
If the standby indicator (2) is off, press
POWER (1) at the side of theTV.
If the standby indicator (2) is red, press
on the remote control.
•
Press on the remote control to mute
the sound.
Press again to restore the sound.
•
•
To adjust headphone volume
To switch to standby
•
Press VOL + / - on the remote control or
press VOLUME + / - on the side of theTV.
When headphones are plugged into theTV,
the loud speakers are automatically muted.
•
Press on the remote control.
» The standby indicator (2) switches to
red.
To switch off
•
Press POWER (1) at the side of theTV.
Switch channels
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
[ColorTemp.]: Makes colors more vivid
and improve the resolution of details in
bright colors.You can switch this feature
on or off.
[Noise Reduction]: Filters and reduces
noise in an image.
6 Use more of
yourTV
Adjust picture and sound
settings
Use smart picture settings
You can use smart picture instead of the
manual picture adjustments to set yourTV to a
predefined setting.
This section describes how to adjust picture
and sound settings.
The settings are pre-defined to suit different
viewing environments.
Adjust picture settings
1
2
3
Press MENU/BACK and select [Picture].
1
2
3
4
Press MENU/BACK and select [Picture].
Press OK.
Press OK.
Press to highlight [Smart Pic] and press
or to select a setting.
Press or to highlight [Picture].
Press or to adjust the settings.
4
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
Picture
Sound
Features
Personal
Install
Ch. Setup
Smart Pic
Tip
Brightness
Contrast
Tint
75
60
0
• Press SMART PIC on the remote control repeatedly
Color
50
75
to toggle the available settings.
Sharpness
Color Temp
Normal
Off
Noise Reduction
The following settings are pre-defined factory
settings to match your viewing environment.
: SEL
: ADJ
: EXIT
MENU
•
•
•
•
[Rich]
[Natural]
[Soft]
5
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
[Personal]
The following smart picture settings can be
configured. Depending on the format of the
picture source, some picture settings are not
available.
Change picture format
1
2
Press MENU/BACK and select [Features]
> [Format]
•
•
•
[Brightness]:Adjusts the intensity and
details of dark areas.
[Contrast]:Adjusts the intensity of bright
areas, keeping dark areas unchanged.
[Tint]:Adjusts the color balance in an
image.
Press or to select the following picture
formats.
•
•
[Color]:Adjusts color saturation.
[Sharpness]:Adjusts the level of sharpness
in image details.
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
[Bass]:Adjusts the low frequency sound
levels.
[Balance]:Adjusts the balance of the right
and left speakers to best suit your listening
position.
Tip
• Toggle
the formats.
FORMAT on the remote control to access
•
•
[AVL]: Reduces sudden changes in volume,
for example, during commecials or when
switching channels. Set on or off.
[MTS]: Multi-channelTV sound. Select
mono, stereo or a Secondary Audio
Program (SAP).
[4:3]: Shows the classic 4:3
format.
[Widescreen]: Stretches
the classic 4:3 format to
16:9.
Use smart sound settings
You can use smart sound instead of the manual
sound settings to set yourTV to a predefined
setting.
The settings are pre-defined to suit different
listening environments.
Adjust sound settings
This section describes how to adjust sound
settings.
1
2
3
Press MENU/BACK and select [Sound].
1
2
3
Press MENU/BACK and select [Sound].
Press OK.
Press OK.
Press to highlight [Smart Sound] and
press or to select a setting.
Press or to select an item and press
or to adjust the setting.
4
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
Picture
Sound
Features
Personal
Install
Ch. Setup
Tip
Smart Sound
Treble
Bass
40
60
50
• Toggle SMART SOUND to access the settings.
Balance
AVL
Off
MTS
Mono
The following settings are pre-defined to match
your listening environment.
: SEL
: ADJ
: EXIT
MENU
•
•
•
•
[Movie]
[Music]
[Voice]
4
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
[Personal]
exit.
Use Back Light
Summary of sound settings
Adjust the brightness of theTV backlight to suit
your surrounding ambient lighting.
•
[Smart Sound]: Pre-defined sound settings
to suit your listening environment.
[Treble]:Adjusts the high frequency sound
levels.
1
2
Press MENU/BACK and select [Features]
> [Back Light].
•
Press or to adjust the level.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatically switch theTV to
standby (Sleeptimer)
Sleeptimer switches theTV to standby after a
delay.You can always switch off yourTV earlier
or reset the sleeptimer during the countdown.
1
Toggle SLEEP on the remote control to
cycle through the sleep timer settings:
off, 15, 30, 45, 60, 90, 120, 180 and 240
minutes.
3
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
Tip
• Press SLEEP once to view the remaining time before
theTV switches to standby. Press SLEEP repeatedly to
change the setting or to turn off sleep timer.
Use Contrast +
Optimizes the contrast settings for overall
picture quality.
Set the clock
1
2
Press MENU/BACK and select [Features]
> [Contrast +].
1
Press MENU/BACK and select [Features]
> [Timer].
Press or to turn on [Contrast +].
2
3
Press OK.
Press to highlight [CurrentTime]
and press or to select the hours or
minutes.
Picture
Sound
Features
Install
Ch. Setup
4
Press or to adjust the hours or
minutes.
Format
Timer
Widescreen
>
>
>
Closed Caption
Parental Control
Back Light
5
Contrast +
On
>
Picture
Sound
Timer
Features
Install
Geometry
Mode Selection
PC
Sleep
Off
: SEL
: ADJ
: EXIT
MENU
Current Time
Activate
09:30
Off
--:--
--:--
TV
Start Time
Stop Time
Source
3
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
Channel No.
2
: SEL
: ADJ
: EXIT
MENU
Use timers
5
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
This section describes how to set the clock and
switch theTV on or off at a specified time.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Activate the timer
Picture
Sound
Timer
Features
Install
1
Press MENU/BACK and select [Features]
> [Timer].
Sleep
Off
2
3
Press OK.
Current Time
Activate
09:30
On
Press and select [Activate] > [On].
Start Time
Stop Time
Source
10:00
11:00
TV
Channel No.
5
Picture
Sound
Timer
Features
Install
: SEL
: ADJ
: EXIT
MENU
Sleep
Off
Current Time
Activate
09:30
On
--:--
--:--
TV
12 Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
Start Time
Stop Time
Source
Channel No.
2
: SEL
: ADJ
: EXIT
MENU
Check timer status
Check the status of the timers that you set for
current time, sleep timer andTV timer.
Set theTV timer
1
Press TIMER on the remote control.
» TheTV timer status is displayed.
1
Press MENU/BACK and select [Features]
> [Timer].
2
3
4
Press OK.
Sleep
Off
Press to highlight [StartTime].
Current Time
Activate
09:30
On
Press to select the hour field, then press
or to adjust the hours.
Start Time
Stop Time
Source
10:00
11:00
TV
Channel No.
5
5
Press to select the minute field, then
press or to adjust the minutes.
6
7
Press to highlight [StopTime].
Press to select the hour field, then press
or to adjust the hours.
You can change the timer settings from
this screen.
8
9
Press to select the minute field, then
press or to adjust the minutes.
2
Press TIMER again to exit the timer display.
Press to highlight [Source].
10 Press or to select the source.
Create and use lists of
favorite channels
11 If you select theTV source, set the channel
for theTV to switch to from standby. Press
to highlight [Channel No.], then press
or to select the number.
This section describes how to set up a list of
your preferredTV channels.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Create and use your favorite list
Note
1
Press MENU/BACK and select [Install] >
[Fav. Channel].
• This television provides a display of television closed
captioning that conforms with the EIA-608 standard
and in accordance with Sections 15.119 of the
FCCrules.
• If you connect your set-top box via HDMI or
component video input, you cannot select closed
caption through theTV.You can select closed caption
through the set-top box only.
2
3
Press OK.
Press or to highlight the favorite
channel number.
4
Use the number keys to key in the channel
number.
» The channel number is displayed
beside the favorite list number. Enter
up to six favorite channels in the list.
• The captions do not always use correct spelling and
grammar.
• Not allTV programs and product commercials include
closed caption information. Refer to your areaTV
program listings for theTV channels and times of closed
caption shows.The captioned programs are usually
noted in theTV listings with service marks such as ‘CC’.
Picture
Sound
Features
Install
Fav. Channel
FAV 1
5
Turn on Closed Caption
FAV 2
FAV 3
FAV 4
FAV 5
FAV 6
12
22
25
30
38
1
Press MENU/BACK and select [Features]
> [Closed Caption].
2
3
Press OK.
Press or to turn on [CC Setting].
: SEL
: ADJ
: EXIT
MENU
5
6
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
Picture
Sound
Features
Install
Closed Caption
CC Setting
CC Mode
On
CC1
Press SURF repeatedly to cycle through
the favorite channels.
View closed captions
(subtitles)
: SEL
: ADJ
: EXIT
MENU
4
5
Press to highlight [CC Mode] and press
or to select a setting.
The caption service displays transmitted
closed caption text.The captioned text can be
displayed permanently or only when theTV is
muted.
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Summary of caption services
Turn on parental control
Service
Description
1
2
Press MENU/BACK and select [Features]
> [Parental Control].
CC-1 and Dialog and descriptions for the
CC-2
action on the captionedTV
program show on screen. Usually
CC1 is the most used. CC 2 can
be used for alternate languages if
they are transmitted.
Press OK.
» You are prompted to enter your
password.
3
Enter your PIN on remote control.
•
If you have never set a PIN before,
enter 0000.
•
If you have forgotten your PIN, reset
it (see ‘Change your password’ on
page 19).
Use child control and rating
locks
The [Parental Control] menu is
displayed.
This section describes how to lock or unlock
theTV.You can set a PIN code or use ratings
to prevent children from watching certain
programs or channels.
Picture
Sound
Features
Install
Parental Control
Change Password
>
Parental Control
Off
>
Change your password
TV Rating
Movie Rating
No Rating Block
>
Off
Follow these steps to set your PIN or to reset
your PIN if you have forgotten it.
1
2
Press MENU/BACK and select [Features]
> [Parental Control].
: SEL
: ADJ
: EXIT
MENU
Press OK.
» You are prompted to enter a
password.
4
Press to highlight [Parental Control] and
press to turn on [Parental Control].
3
Enter your 4-digit PIN on the number keys
of the remote control.
UseTV ratings lock
•
If you have never set your PIN before,
enter 0000.
If you have set your PIN but have
forgotten it, enter 0711.
The [Parental Control] menu is
displayed.
YourTV is equipped with aV-chip that allows
you to control access to individual programs
based on their age rating and content rating.
The program content advisory data are from
the broadcaster or by the program provider.
If you receive channels through a set-top box
or cable box connected by HDMI, you cannot
use theTV ratings lock.Your set-top box or
cable box must be connected through RF or AV
connectors.
•
4
5
Select [Change Password] and press OK.
Enter a new PIN, and then enter the PIN
again to confirm.
6
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
1
2
3
Access the [Parental Control] menu.
Press and select [TV Rating].
Press OK.
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Summary ofTV ratings
Age rating
4
Press to highlight a rating and press OK
to select [View] or [Block].
Content
rating
All
None
None
None
Picture
Sound
Features
Install
D
TV Rating
TV-Y:Appropriate for children of None
all ages with themes and elements
suitable for children aged 2-6.
TV-Y7: Programs designed for
children age 7 and older.
All FV
V
S
L
None
V
V
TV - Y
TV - Y7
TV - G
TV - PG
TV - 14
TV - MA
V
V
V
V
V
V
[(FV)
V
V
V
V
V
V
V
V
V
V
V
Fantasy
Violence]
None
TV-G: Programs suitable for all
ages.These programs contain little
or no violence, no strong language
and little or no sexual dialog or
situations.
: SEL
: ADJ
: EXIT
MENU
When you block a rating, all ratings in the
younger age categories are automatically
blocked.
TV-PG: Programs contain
[(D)
Dialog]
[(L)
Language]
[(S) Sex]
[(V)
5
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
elements that some parents
may find unsuitable for younger
children and which may need
parental guidance.The program
may contain moderate violence,
sexual dialog and/or situations and Violence]
some strong language.
TV-14: Programs contain elements [(D)
that may not be suitable for
children under 14 years of age.
These programs include one or
more of the following: intense
Dialog]
[(L)
Language]
[(S) Sex]
violence, intense sexual situations, [(V)
suggestive dialog and strong
Violence]
language.
TV-MA: Programs are designed to [(L)
be viewed by adults and may be Language]
unsuitable for children under the [(S) Sex]
age of 17.These programs may
[(V)
contain graphical violence, explicit Violence]
sexual activity and/or crude or
indecent language.
Use movie ratings lock
This section describes how to control viewing
of movies based on their Motion Picture
Association of America (MPAA) rating.
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Summary of US movie ratings
1
2
3
4
Access the [Parental Control] menu.
Press and select [Movie Rating].
Press OK.
Rating
Description
All
All items in the ratings list are
locked.
Press to highlight a rating and press
or to change the setting to [View] or
[Block].
NR
G
Not rated.
Movies with a mild content,
suitable for all ages.
PG
Movies for which parental
guidance is recommended.They
may contain a few racy or violent
scenes or maybe some bad
language.
Picture
Sound
Features
Install
Movie Rating
N/R
View
Block
View
View
View
View
View
G
PG
PG-13
R
PG -13
R
Movies for which parental
guidance may be recommended if
under age 13.
Restricted.The movies usually
contain offensive sex or bad
language and may be unsuitable
for children under the age of 17.
Parental guidance or permission
needed.
Even with parental permission,
forbidden under age 17. More
offensive sex, violence or bad
language.
Movies which generally focus on
sex, violence and/or bad language.
Also known as pornography.
NC-17
X
: SEL
: ADJ
: EXIT
MENU
When you block a movie rating, all items
for ages below that movie rating are
automatically blocked.
5
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
NC-17
X
Block unrated or no rating programs
Block unrated programs such as “director’s cut”
edition or programs with no advisory data.
1
2
Access the [Parental Control] menu.
Press to highlight [Unrated Block] or
[No Rating Block].
3
4
5
Press OK.
Press or to select [On].
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Unlock blocked channels or programs
To view programs or channels blocked with the
parental control blocking options, unlock them
with the password or turn off parental control.
Turn off parental control
1
2
Access the [Parental Control] menu.
Press to highlight [Parental Control]
and press or to turn off [Parental
Control].
Picture
Sound
Features
Install
Parental Control
Change Password
>
Parental Control
Off
>
TV Rating
Movie Rating
No Rating Block
>
On
: SEL
: ADJ
: EXIT
MENU
3
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
If necessary, adjust the picture position to the
center of the screen with the cursor buttons.
7 Use yourTV as
a PC monitor
Adjust display settings for PC
mode
For information about how to connect a PC to
theTV, see the Quick Start.
Adjust yourTV display settings in PC mode.
1
2
Press MENU/BACK and select [Features]
> [Geometry].
Caution
• Before you connect your PC, set the PC monitor
refresh rate to 60Hz.
Press OK.
Picture
Sound
Features
Install
Geometry
Auto Adjust
Configure yourTV in PC
Horizontal Shift
Vertical Shift
Clock
+50
+50
100
100
mode
Phase
1
Press SOURCE and select PC, then press
OK.
: SEL
: ADJ
: EXIT
MENU
Tip
3
4
5
Press or to select an item.
• Toggle TV/PC to switch to PC and the last accessed
mode.
Press or to adjust the setting.
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
Note
You can configure the following display settings
for PC mode:
• Certain picture and sound features are not available in
PC mode.
•
[Auto Adjust]: Synchronizes the phase and
clock on theTV and PC.
•
[Horizontal Shift] and [Vertical Shift]:
Adjusts the horizontal and vertical position
of the picture.
Supported screen resolutions
The following screen resolutions are supported
in PC mode:
•
[Clock] and [Phase]: Fine-tunes theTV to
match the display settings of the PC.
Resolution
640 x 480
800 x 600
1024 x 768
1280 x 768
1280 x 1024
Refresh rate
60Hz
60Hz
60Hz
60Hz
60Hz
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
8 Use yourTV in
HDTV mode
• Certain picture and sound features are not available in
HDMI and YCbCr modes.
Not all models can be configured in high
definition (HD) mode. For information about
your set, see the specification.
Supported screen resolutions
The following screen resolutions are supported
When you connect an HD device to yourTV,
configure the display format of yourTV.You
might also have to configure the display format
of your HD device. For information about
configuring your device, see the documentation
of the device.
in HDMI and YPbPr modes:
Resolution
480i
Refresh rate
60Hz
480p
60Hz
576i
50Hz
576p
50Hz
720p
720p
1080i
1080i
50Hz
60Hz
50Hz
60Hz
Configure yourTV in HD
mode
1 Connect your HD device to theTV. Refer
to the Quick Start.
If necessary, adjust the picture position to the
center of the screen with the cursor buttons.
2
3
Press SOURCE and select HDMI or
YPBPR, then press OK.
Press MENU/BACK and select [Features]
> [Mode Selection].
Adjust display settings in HD
mode
4
5
Press OK.
Press or to select a mode.
Adjust yourTV display settings in HD mode.
1
2
Press MENU/BACK and select [Features]
> [Geometry].
Picture
Sound
Features
Install
Ch. Setup
Press OK.
Format
Timer
Widescreen
>
>
>
Closed Caption
Parental Control
Back Light
Picture
Sound
Features
Install
5
Geometry
Contrast +
Off
Geometry
>
Mode Selection
HDMI
Horizontal Shift
Vertical Shift
+50
+50
: SEL
: ADJ
: EXIT
MENU
6
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
: SEL
: ADJ
: EXIT
MENU
exit.
3
Press or to select an item.
24 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Press or to adjust the setting.
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
The following display settings can be configured
when an HD device is connected to theTV.
•
[Horizontal Shift] and [Vertical Shift]:
Adjusts the horizontal and vertical position
of the picture.
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Install channels
Picture
Sound
Features
Install
Ch. Setup
Tuner Mode
Antenna
The first time you setup yourTV, you are
prompted to select a menu language and to
installTV and digital radio channels (if available).
This chapter provides instructions on how to
reinstall and fine-tune channels.
System
Auto
>
Auto Program
Fine Tune
193.25Mhz
: SEL
: ADJ
: EXIT
MENU
Select your language
3
4
Press and select [System].
Press or and select [AUTO], [PAL M],
[PAL N] or [NTSC].
a Press MENU/BACK and select [Install] >
[Language].
Picture
Sound
Features
Install
Picture
Sound
Features
Install
Ch. Setup
Ch. Setup
Tuner Mode
Antenna
Language
English
System
NTSC
>
Ch. Setup
List
>
>
>
Auto Program
Fine Tune
195.30Mhz
Fav. Channel
: SEL
: ADJ
: EXIT
MENU
: SEL
: ADJ
: EXIT
MENU
5
6
Press to highlight [Auto Program] and
press OK.
b Press or to select a language, then
press OK.
•
TheTV detects the [Antenna] or
[Cable] signal that you have selected
and search for all the available
channels.
c Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
•
When the search completes, theTV
switches to the first channel found.
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
Automatically install channels
This section describes how to search and store
channels automatically. Instructions are for both
digital and analogue channels.
Fine tune channels
1
2
Press MENU/BACK and select [Install] >
[Ch. Setup] > [Tuner Mode].
You can manually fine tune channels when the
reception is poor.
Press or and select [Antenna] or
[Cable].
1
Press CH + / - or use the number keys to
select the channel to fine tune.
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Press MENU/BACK and select [Install] >
[Ch. Setup] > [FineTune].
Picture
Sound
List
Features
Install
Press or to adjust the frequency
setting.
Current Channel
In List
30
Off
: SEL
: ADJ
: EXIT
MENU
Picture
Sound
Features
Install
Ch. Setup
5
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
Tuner Mode
Antenna
System
Auto
>
Auto Program
Fine Tune
195.30Mhz
: SEL
:ADJ
: EXIT
MENU
4
Press MENU/BACK to return to the
previous menu, or press STATUS/EXIT to
exit.
Exclude channels from a list
You can exclude a channel from your list of
channels. Excluded channels are not accessed
when you press CH + / - on the remote
control or CHANNEL + / - on the side of
theTV. Excluded channels can be accessed,
however, by pressing the number keys on the
remote control. It can be useful to exclude
channels with weak signals.
1
Press MENU/BACK and select [Install] >
[List].
2
3
4
Press OK.
Press or to select a channel number.
Press to highlight [In List], and press
or to select [Off].
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Check the connections.
Set the PC refresh rate to 60Hz.
Snowy dots and interference
10 Troubleshooting
If the antenna is located in the fringe area of a
television signal where the signal is weak, the
picture may appear snowy.When the signal is
weak, it may be necessary to install a special
antenna to improve the reception.
This section describes commonly-encountered
issues and accompanying solutions.
Some problems you encounter with yourTV
can be corrected by consulting the following list:
No picture, no sound
•
Adjust the position and orientation of
the indoor/outdoor antenna.
Check the connection of antenna.
Fine tune the program.
Try another program. Broadcasting
failure may happen.
1
2
Check if the fuse or circuit breaker works.
•
•
•
Plug another electrical device into the
outlet to make sure it works or is turned
on.
3
4
Power plug is in a bad contact with the
outlet.
Ghost
“Ghosting” occurs when the television signal
follows two paths. One is the direct path,
the other is reflected from tall buildings, hills,
or other objects. Changing the direction or
position of the antenna may improve the
reception.
Check the signal source.
No color
1
2
3
Change the color system.
Adjust the saturation.
Try another program. Black-white program
may be received.
Radio frequency interference
This interference produces moving ripples
or diagonal streaks, and in some case, loss of
contrast in the picture. Find out and remove the
radio interference source.
Remote control does not work
1
2
3
Change the batteries.
Batteries are not installed correctly.
Main power is not connected.
No picture, normal sound
1
2
Adjust the brightness and contrast.
Broadcasting failure may happen.
Normal picture, no sound
1
Press theVOLUME + button to increase
volume.
2
Volume is set to mute, press MUTE to
restore sound.
3
4
Change the sound system.
Broadcasting failure may happen.
Ripples on the picture
Usually caused by local interference such as
cars, daylight lamps and hair driers. Adjust the
antenna to minimize the interference.
Blank screen inVGA(PC) mode
Perhaps theTV can not recognize the resolution
set by the PC. Change to the best resolution or
other standard resolutions of the PC system.
28 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Rear)
11 Product
information
•
AV 1: Composite video (CVBS in),Audio
L/R in
•
YPBPR: Component video (CVI in),Audio
L/R in
•
•
•
PC:VGA in,VGA Audio in
HDMI: 1x
TV:TV ANTENNA
Note
• Product information is subject to change without prior
notice.
Connections (Side)
Supported display resolutions
•
•
Headphone out (stereo mini-jack)
AV1: Composite video (CVBS) in,AUDIO
L/R in
•
Computer formats (see ‘Supported screen
resolutions’ on page 23)
•
SVIDEO: 1x S-Video in
•
Video formats (see ‘Supported screen
resolutions’ on page 24)
Power
Tuner/Reception/
Transmission
•
•
Mains power:AC 100-240V (±10%)
Power power consumption: 50 W
(19PFL3403), 80 W (26PFL3403)
Standby power consumption: < 0.3 W
Specifications are subject to change
without notice. For detailed specifications
support.
•
•
•
Antenna input: 75ohm coaxial (IEC75)
TV system:
Video playback: NTSC, PAL
•
•
Sound
•
Sound system:
Mono/Stereo/SAP
Power output:
Weight
•
•
•
TV weight: 4.2 kg (19PFL3403), 7.7 kg
•
•
2 x 3W (19PFL3403)
2 x 5W (26PFL3403)
(26PFL3403)
TV weight with stand: 4.9 kg (19PFL3403),
9.1 kg (26PFL3403)
•
Remote control
Dimensions
•
•
Type: PF05L08B
Batteries: 2 x AAA size (LR03 type)
•
TV dimensions:
Height: 35.3 cm (19PFL3403), 45.8 cm
(26PFL3403)
•
EN 29
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Width: 47.3 cm (19PFL3403), 67.1 cm
(26PFL3403)
Depth: 6.9 cm (19PFL3403), 9.0 cm
(26PFL3403)
•
TV dimensions with stand:
•
•
•
Height: 39.4 cm (19PFL3403), 50.3 cm
(26PFL3403)
Width: 47.3 cm (19PFL3403), 67.1 cm
(26PFL3403)
Depth: 16.0 cm (19PFL3403), 21.5 cm
(26PFL3403)
This information is correct at the time of press.
For updated contact information, refer to www.
philips.com/support.
30 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2008 Koninklijke Philips Electronics N.V.
All rights reserved.
Document order number:
Download from Www.Somanuals.com. All Manuals Search And Download.
|