Color Television
PS1947C1
Instructions for use
3135 015 18321
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS - Read before operating equipment
This product was designed and manufactured to meet strict quality and
safety standards. There are, however, some installation and operation pre-
cautions which you should be particularly aware of.
11. Power-Cord Protection - Power supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords and plugs,
convenience receptacles, and the point where they exit from the
appliance.
1. Read Instructions - All the safety and operating instructions should
be read before the appliance is operated.
12. Cleaning - The appliance should be cleaned only as recommended
2. Retain Instructions - The safety and operating instructions should
by the manufacturer.
be retained for future reference.
13. Power Lines - An outdoor antenna should be located away from
3. Heed Warnings - All warnings on the appliance and in the operating
power lines.
instructions should be adhered to.
14. Outdoor Antenna Grounding - If an outside antenna is connected
to the receiver, be sure the antenna system is grounded so as to pro-
vide some protection against voltage surges and built up static
charges.
4. Follow Instructions - All operating and use instructions should be
followed.
5. Water and Moisture - The appliance should not be used near water
- for example, near a bathtub, washbowl, kitchen sink, laundry tub, in
a wet basement or near a swimming pool, etc.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the mats
and supporting structure grounding of the lead-in wire to an antenna
discharge unit, size of grounding connectors, location of antenna-dis-
charge unit, connection to grounding electrodes and requirements for
the grounding electrode. See Fig. below.
6. Carts and Stands - The appliance should be used only with a cart or
stand that is recommended by the manufacturer.
6A.
An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven sur-
faces may cause the appliance and cart combination to
overturn.
15. Non-use Periods - The power cord of the appliance should be
unplugged from the outlet when left unused for a long period of time.
16. Object and Liquid Entry - Care should be taken so that objects do
not fall and liquids are not spilled into the enclosure through open-
ings.
6B. Tilt/Stability - All televisions must comply with recommended inter-
national global safety standards for tilt and stability properties of its
cabinet design.
•
Do not compromise these design standards by applying exces-
sive pull force to the front, or top, of the cabinet which could
ultimately overturn the product.
Also, do not endanger yourself, or children, by placing elec-
tronic equipment/toys on the top of the cabinet. Such items
could unsuspectingly fall from the top of the set and cause
product damage and/or personal injury.
17. Damage Requiring Service - The appliance should be serviced by
qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance;
or
•
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a
marked change in performance; or
7. Wall or Ceiling Mounting - The appliance should be mounted to a
wall or ceiling only as recommended by the manufacturer.
E. The appliance has been dropped, or the enclosure damaged.
8. Ventilation - The appliance should be situated so that its location or
position does not interfere with its proper ventilation. For example,
the appliance should not be situated on a bed, sofa, rug, or similar
surface that may block the ventilation openings; or, placed in a built-
in installation, such as a bookcase or cabinet that may impede the
flow of air through the ventilation openings.
9. Heat - The appliance should be situated away from heat sources such
as radiators, heat registers, stoves, or other appliances (including
amplifiers) that produce heat.
18. Servicing - The user should not attempt to service the appliance
beyond that described in the operating instructions. All other servic-
ing should be referred to qualified service personnel.
Note to the CATV system installer: This reminder is provided to call the
CATV system installer's attention to Article 820-40 of the NEC that pro-
vides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical.
10. Power Sources - The appliance should be connected to a power sup-
ply only of the type described in the operating instructions or as
marked on the appliance.
Example of Antenna Grounding
as per NEC - National Electric Code
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC SERVICE EQUIPMENT
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Introduction
Here are a few of the special features built into this
new Color Television:
Welcome/Registration of Your TV . . . . . . . . . . . . . . .2
Safety/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Basic Cable TV Signal Connection . . . . . . . . . . . . . .5
Basic Antenna Signal Connection . . . . . . . . . . . . . . .6
Basic TV to VCR (Accessory) (Front A/V Inputs) . . .7
Basic TV and Remote Operations . . . . . . . . . . . . . . .8
TV Remote Buttons . . . . . . . . . . . . . . . . . . . . . . . . . .9
SmartLock™ feature allows you to block the view-
ing of certain channel or external audio/video con-
nections where you might not want your children
viewing inappropriate material.
Infrared Remote Control works your TV set.
Standard broadcast (VHF/UHF) or Cable TV
(CATV) channel capability.
Stereo TV with built-in audio amplifier and twin
speaker system for receiving TV programs broadcast
in stereo sound. This TV can actually detect if the
signal being received is Stereo and adjust for it.
Setup MENU
✧ Selecting the Menu Language . . . . . . .10
✧ Setting the Cable Control . . . . . . . . . . . . . . . .11
✧ Using the Auto Program Control . . . . . . . . . . .12
✧ How to Use the Channel Edit Control . . . . . . .13
Closed Captioning allows the viewer to read TV
program dialogue or voice conversations as onscreen
text.
Automatic Programming of Channels for quick
and easy selection of favorite stations available in
your area.
Onscreen MENU
✧ Adjusting the TV Picture . . . . . . . . . . . .14
✧ Setting the TV for Closed Caption . . . . . . . . .15
✧ Using the Sleep Timer Control . . . . . . . . . . . .16
✧ Setting the TV for Stereo Programming . . . . .17
✧ Using the Volume Bar Control . . . . . . . . . . . .18
✧ Using the Alternate Channel Control . . . . . . . .19
Onscreen Features (in either English or Spanish)
show helpful messages for setting of TV controls.
Sleep Timer automatically turns the TV OFF at pre-
set times.
SmartLock™
✧ Understanding the SmartLock Feature . . . .20
✧ Setting the SmartLock Access Code . . . . . . . . .21
✧ Setting the Blocking Options . . . . . . . . . . . . . .22
✧ Block Programming Using Movie Ratings . . . .23
✧ Block Programming Using TV Ratings . . . . . .24
✧ Using the SmartLock Review Screen . . . . . . . .25
General Information
Troubleshooting . . . . . . . . . . . . . . . . . . .26-27
Glossary of TV Terms . . . . . . . . . . . . . . . . . . . . . . .27
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Factory Service Locations . . . . . . . . . . . . . . . . .29-30
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
NOTE: This owner's manual is used with sev-
eral different television models. Not all fea-
tures (and drawings) discussed in this manual
will necessarily match those found with your
television system. This is normal and does not
require contacting your dealer or requesting
service.
Copyright © 2000 Philips Consumer Electronics Company. All rights reserved.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC CABLE TV SIGNAL CONNECTION
CABLE TV
our Cable TV input into your
Yhome may be a single (75
ohm) cable, or a Converter Box
installation. In either case the
connection to the TV is very easy.
Just put the threaded end of the
cable signal to the TV's antenna
plug and screw it down tight.
SMART
HELP
Remember:
Set the TV for the
type signal you've
just connected. Refer
to the Cable Control
on page 11 to set the
TV for cable tuning.
To select only the
channel numbers on
your Cable system
refer to the Auto
Program Control on
page 12. If you use a
Cable Converter box,
set the TV to the
same channel as the
converter's CH 3/4
switch (on the rear of
the converter.)
BEGIN
If your Cable TV signal is a sin-
gle round cable (75 ohm) then
you're ready to connect to the TV.
If you have a Cable Converter
Box:
Connect the Cable TV signal to the
Cable Signal IN(put) plug on the
Converter.
Connect the Cable TV cable to
the 75Ω plug on the TV.
If you have a Cable Converter Box:
Connect the OUT(put) plug from the
Converter to the 75Ω plug on the TV.
75 ⍀
Back of TV
Cable TV Company
2
Cable TV Signal Input
OR
75 ⍀
O
U
T
IN
Jack Panel
Round Cable
75Ω
Cable TV Converter
Box Connection
1
5
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC ANTENNA SIGNAL CONNECTIONS
SMART
HELP
ANTENNA
combination antenna receives
Anormal broadcast channels
(VHF 2-13 and UHF 14-69).
Your connection is easy since
there is only one 75Ω (ohm)
antenna plug on the back of your
TV - and that’s where the antenna
goes.
Remember:
Be sure to set the
TV for the type sig-
nal you've connect-
ed (see the “Cable”
section on page 11
of this manual.)
Note: For homes with separate UHF and VHF antennas
you will need an optional combiner to connect to the TV.
U/V
Combiner
BEGIN
To set the TV to
select only the chan-
nel numbers in your
area see how to
“Program" or "Add"
channels in the TV’s
memory on page 12
(Auto Program sec-
tion).
If your antenna has a round
cable (75 ohm) on the end, then
you're ready to connect it to the TV.
If your antenna has flat twin-lead
wire (300 ohm), you first need to
attach the antenna wires to the screws
on a 300 to 75 ohm adapter.
75
⍀
Back of TV
75-300 Ohm Adapter
Push the round end of the
adapter (or antenna) onto the 75Ω
plug on the rear of the TV. If the
round end of the antenna wire is
threaded, screw it down tight.
To order any option-
al accessory contact
your dealer or the
Philips Parts Center
at 1-800-851-8885.
75 ⍀
Back of TV
Combination VHF/UHF
Antenna
(Outdoor or Indoor)
2
300 to 75Ω
Adapter
1
Twin Lead
Wire
OR
75 ⍀
Round Cable
75Ω
6
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC TV TO VCR (& FRONT A/V INPUT) CONNECTIONS
TV TO VCR
he basic Antenna, or Cable
TTV, to VCR to TV connection
is shown below. For more infor-
mation on other hookups (possi-
ble when Cable
Converter/Descrambler boxes are
included) refer to your accessory
Device and Cable Converter
Owner's Manual for details.
FRONT AUDIO/VIDEO INPUTS
This television is equipped with Stereo Audio and Video input jacks
located in the front of the TV’s cabinet just left of the Channel and
Volume buttons. These inputs can be used to view the video from a
Camcorder, VCR, or other accessory device. When an accessory device
is plugged into these inputs, use the remote to tune one channel below
the lowest available channel in your TV’s memory. This channel is
labeled as AV. When tuned to the AV channel, the signal coming through
the front Audio/Video Inputs can be seen and heard.
BEGIN
Connect your Antenna or Cable
TV signal to the IN FROM
ANT(enna) plug on the Accessory.
MENU
Front Control Panel of TV
–
VOLUME
+
CHANNEL
POWER
VIDEO
L
AUDIO
R
Front Audio/Video Inputs
Connect the OUT TO TV plug
on the VCR to the 75Ω plug on the
TV (connecting cable supplied with
the Accessory Device.)
Yellow
Video Cable
Red/White
Audio Cables
OUT
OUT
OUT
VIDEO
IN
ANTENNA
IN
Rear Jackpanel of VCR
(Stereo VCR shown)
L
AUDIO
R
ANTENNA
OUT
IN
IN
MENU
–
VOLUME
+
–
CHANNEL
+
POWER
VIDEO
L
AUDIO
R
VCR, Camcorder, DVD, or an accessory
device with Audio and Video Outputs
300 to 75Ω
Outdoor
Ohm Adapter
VHF/UHF
75
⍀
Antenna
1
Back of TV
OR
OUT TO TV
IN FROM ANT.
75 ⍀
Cable TV signal
VCR, Camcorder, DVD,
or an Accessory Device
Round Cable
75Ω Supplied with VCR
7
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC TV/REMOTE OPERATIONS
SMART
HELP
TELEVISION
BEGIN
Remember,
The tuned chan-
nel number will
Press the POWER button to
turn the TV ON.
always briefly appear
when the TV is first
turned ON (and with
channel changes.)
Press the VOLUME + button to
increase the sound level, or the
VOLUME – button to lower the
sound level.
You can also press the
STATUS/EXIT button
(on the remote) to see
what channel the TV
is ON.
Pressing both buttons at the same
time will display the onscreen menu.
Once in the menu, use these button
to make adjustments or selections.
MENU
–
VOLUME
+
CHANNEL
POWER
VIDEO
L
AUDIO
R
Press the CHANNEL UP ▲ or
DOWN ▼ button to select TV chan-
nels.
Remote Sensor Window
MENU
When operating the TV using
the remote control, point the remote
toward the remote sensor window on
the TV.
– VOLUME +
CHANNEL
POWER
L
AUDIO
R
VIDEO
1
3
Front Audio/Video Inputs (Stereo)
2
The Front Audio/Video Input Jacks
make it real easy to watch the playback
of a video tape using a camcorder
(or any accessory device) with
Audio/Video Output Jacks.
REMOTE
BATTERY INSTALLATION
o load the supplied batteries
Tinto the remote:
R
E
W
O
P
4
3
5
+
H
C
1. Remove the battery compart-
ment lid on the back of the remote.
2
6
8
1
9
0
4
+
L
O
V
C
C
7
–
L
O
V
2. Place the batteries (2-AA) in
the remote. Be sure the (+) and (-)
ends of the batteries line up correctly
(inside of case is marked.)
H
C
/
A
S
U
T
A
U
T
N
E
T
U
E
S
M
M
T
I
X
E
P
E
E
L
S
Point the remote control toward
the remote sensor window on the
TV when operating the TV with
the remote.
3. Reattach the battery lid.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TV REMOTE BUTTONS
Power Button
Press to turn the TV ON and OFF.
Number Buttons
Press the number buttons to select TV channels. For single digit entries,
press the number of the channel you desire. The TV will pause for a few
seconds, then change to the selected channel.
1
4
POWER
CH+
2
5
8
0
3
6
Channel (+), (–) Buttons
Press to change the tuned channel.
Volume (+), (–) Buttons
Press to adjust the TV sound level.
CH–
7
9
CC Button
Press to select Closed Caption options within the menu.
CC
A/CH
A/CH Button
VOL+
VOL–
Press to toggle between the currently viewed channel and the previously
viewed channel.
STATUS
EXIT
Status/Exit Button
Press to see the current channel number and the Clock (if set) on the TV
screen. Also press to clear the TV screen after control adjustments.
MENU
Cursor Buttons
Use these button to select and adjust the TV's onscreen menu.
Menu Button
SLEEP
Press for the onscreen menu to appear. Pressing the menu button after
menu selections are made will eliminate the menu from the display.
MUTE
Sleep Button
Press to set the TV to automatically turn itself OFF.
Mute Button
Press to turn the sound OFF on the TV. Press again to return the
sound to its previous level.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MENU LANGUAGE CONTROL
or our Spanish speaking TV own-
Fers an onscreen LANGUAGE
option is present. With the LAN-
GUAGE control you can set the TV’s
onscreen menu to be shown in either
English or Spanish.
BEGIN
Press the MENU button on the
remote to show the onscreen menu.
PICTURE
SMARTLOCK
SETUP
CC
STEREO
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
the onscreen menu until the word
SETUP is highlighted.
LANGUAGE
ENGLISH
CABLE
CHANNEL EDIT
AUTO PROGRAM
Press the CURSOR RIGHT ᮣ
button to display the SETUP menu
features.
OR
Press CURSOR UP ▲ or
DOWN ▼ buttons to scroll the
Setup features until the word LAN-
GUAGE is highlighted.
1
2
POWER
CH+
3
6
4
7
5
8
0
IDIOMA
CABLE
ESPANOL
CH–
9
Press the CURSOR RIGHT ᮣ
button repeatedly to select ENG-
LISH or ESPANOL (Spanish).
EDICION DE CANAL
AUTO PROGRAMA
4
A/CH
CC
V
2
VOL–
TATUS
1
MENU
SLEEP
MUT
3
5
SMART HELP
Remember: The Language
control only makes the TV’s
onscreen MENU items appear in
English or Spanish text. It does not
change the other onscreen text fea-
tures such as Closed Caption (CC)
TV shows.
The onscreen menu will time out and
disappear from the screen when you
finish, or you can press the STA-
TUS/EXIT button to clear the menu
from the screen.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE CABLE (TUNING) CONTROL
he CABLE feature allows you to
Tchange the TV’s signal input by
turning the “Cable Mode” ON or
OFF. It’s important for the TV to
know what type of signal, either a
Cable TV signal or a normal
Antenna signal, is to be used.
BEGIN
Press the MENU button on the
remote to show the onscreen menu.
PICTURE
SMARTLOCK
SETUP
CC
STEREO
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
the onscreen menu until the word
SETUP is highlighted.
LANGUAGE
CABLE
YES
CHANNEL EDIT
AUTO PROGRAM
Press the CURSOR RIGHT ᮣ
button to display the SETUP menu
features.
OR
1
POWER
CH+
2
3
6
Press CURSOR UP ▲ or
DOWN ▼ buttons to scroll the
Setup features until the word
CABLE is highlighted.
4
7
5
8
0
CH–
9
LANGUAGE
CABLE
A/CH
CC
V
4
NO
CHANNEL EDIT
AUTO PROGRAM
Press the CURSOR RIGHT ᮣ
button to turn the CABLE mode
ON or OFF.
VOL–
TATUS
1
MENU
SLEEP
MUT
3
5
2
SMART HELP
When CABLE is ON, chan-
nels 1-125 are available.
When CABLE is OFF only channels
2-69 are available.
The onscreen menu will time out and
disappear from the screen when you
finish, or you can press the STA-
TUS/EXIT button to clear the menu
from the screen.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE AUTO PROGRAM CONTROL
our TV can automatically set itself
Yfor local area (or Cable TV) chan-
nels. This makes it easy for you to
select only the TV stations in your
area when the CHANNEL (+), (–) but-
tons are pressed.
PICTURE
SMARTLOCK
SETUP
CC
STEREO
Note: Make sure the Antenna or Cable
TV signal connection has been complet-
ed before AUTO PROGRAM is started.
LANGUAGE
CABLE
CHANNEL EDIT
AUTO PROGRAM
BEGIN
Press the MENU button on the
remote to show the onscreen menu.
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
the onscreen menu until the word
SETUP is highlighted.
1
4
POWER
CH+
2
5
8
0
3
6
AUTO PROGRAM . . . 2
CH–
7
9
Press the CURSOR RIGHT ᮣ
button to display the SETUP menu
features.
A/CH
CC
V
4
VOL–
TATUS
1
MENU
Press CURSOR UP ▲ or
DOWN ▼ buttons to scroll the
Setup features until the words AUTO
PROGRAM are highlighted.
SLEEP
MUT
AUTO PROGRAM . . . 3
3
5
2
Press the CURSOR RIGHT ᮣ
button to start the Auto Program
scanning of channels.
AUTO PROGRAM . . . 4
SMART HELP
WITH CABLE CONTROL SET TO NO
WITH CABLE CONTROL SET TO YES
Try it out. Press the CHAN-
NEL (+), (–) buttons and see
which channels have been added to
the TV’s memory.
If you want to delete any unwanted
channels from the TV’s memory, see the
CHANNEL EDIT section on page 13.
AUTO PROGRAM . . . 69
AUTO PROGRAM . . . 125
The onscreen menu will time out and
disappear from the screen when you
finish, or you can press the STA-
TUS/EXIT button to clear the menu
from the screen.
When Auto Programming is
finished, the screen will display
“CHANNELS ARE SET” and
return to the SETUP menu.
CHANNELS ARE SET
12
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE CHANNEL EDIT CONTROL
hannel Edit makes it easy for you
Cto SAVE or DELETE channels
from the list of channels stored in the
TV’s memory.
BEGIN
Using the Numbered Buttons,
enter the channel you wish to save
or delete from the TV’s memory.
12
Press the MENU button on the
remote to show the onscreen menu.
Press the CURSOR UP ▲ or
DOWN ▼ button to scroll through
the onscreen menu until the word
SETUP is highlighted.
PICTURE
SMARTLOCK
SETUP
CC
STEREO
Press the CURSOR RIGHT ᮣ
button to display the SETUP menu
features.
12
1
POWER
CH+
2
5
8
0
3
6
1
LANGUAGE
CABLE
CHANNEL EDIT
AUTO PROGRAM
Press the CURSOR DOWN ▼
button to scroll the Setup features
until the words CHANNEL EDIT
are highlighted.
SAVED
CH–
7
9
A/CH
CC
3
VOL–
TATUS
Press the CURSOR RIGHT ᮣ
button to toggle between SAVED or
DELETED.
2
MENU
OR
SLEEP
MUT
If SAVED is selected, the channel will
added to the television’s memory and
will be available using the Channel +
or – buttons.
4
12
6
3
5
LANGUAGE
CABLE
If the channel is present in the televi-
sion’s memory and DELETED is
selected, the present channel will be
removed from the current TV memory.
CHANNEL EDIT
AUTO PROGRAM
DELETED
SMART HELP
To clear the onscreen menu
press the STATUS/EXIT button
or wait a few seconds after you have
finished your adjustment and the
menu will automatically disappear
from the screen.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE TV PICTURE
o adjust your TV picture con-
Ttrols, select a channel and follow
the steps shown below:
BEGIN
PICTURE
SMARTLOCK
SETUP
Press the MENU button on the
remote to display the onscreen menu.
CC
STEREO
With PICTURE highlighted,
press the CURSOR RIGHT ᮣ
button to display the PICTURE
adjustment options.
BRIGHTNESS
COLOR
PICTURE
Press the CURSOR UP ▲ or
DOWN ▼ buttons until the word
BRIGHTNESS is highlighted (or,
COLOR, PICTURE, SHARPNESS,
TINT, CONTRAST PLUS depend-
ing on the adjustment you want to
make).
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
1
4
POWER
CH+
2
5
8
0
3
6
CH–
7
9
A/CH
CC
V
3
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
TINT
VOL–
TATUS
1
MENU
Press the CURSOR RIGHT ᮣ
or the CURSOR LEFT ᮤ buttons
to increase or decrease the brightness
(or other option) of the picture.
SLEEP
MUT
2
4
3
BRIGHTNESS
COLOR
Note: CONTRAST PLUS can only
be turned ON or OFF.
PICTURE
SHARPNESS
TINT
CONTRAST PLUS
SMART HELP
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
TINT
BRIGHTNESS Press the ᮣ
or ᮤ buttons until darkest parts of
the picture are as bright as you prefer.
CONTRAST PLUS
COLOR Press the ᮣ or ᮤ buttons to
add or eliminate color.
PICTURE Press the ᮣ or ᮤ buttons
until lightest parts of the picture show
good detail.
BRIGHTNESS
COLOR
SHARPNESS Press the ᮣ or ᮤ buttons
to improve detail in the picture.
PICTURE
SHARPNESS
TINT
CONTRAST PLUS
OFF
TINT Press the ᮣ or ᮤ buttons to
obtain natural skin tones.
CONTRAST PLUS Press the ᮣ or ᮤ
buttons to turn this option ON or OFF.
When Contrast Plus (Black Stretch) is
ON, it helps to “sharpen” the picture qual-
ity. The black portions of the picture
become richer in darkness and the whites
become brighter.
OR
BRIGHTNESS
COLOR
PICTURE
The onscreen menu will time out and dis-
appear from the screen when you finish, or
you can press the STATUS/EXIT button to
clear the menu from the screen.
SHARPNESS
TINT
CONTRAST PLUS
ON
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE TV FOR CLOSED CAPTIONING
losed Captioning (CC) allows
Cyou to read the voice content of
television programs on the TV
screen. Designed to help the hear-
ing impaired, this feature uses
onscreen “text boxes” to show dia-
logue and conversations while the
TV program is in progress.
NOTE: Not all TV programs and product commercials are made for broadcast
with Closed Caption (CC) information included. Neither are all Closed Caption
modes (CC-1, or CC-2) necessarily being used by a broadcast station during the
transmission of a closed caption program. Refer to your area's TV program listings
for the stations and times of Closed Caption shows.
BEGIN
Press the MENU button on the
remote to display the onscreen
menu.
PICTURE
SMARTLOCK
SETUP
CC
CC-OFF
STEREO
PICTURE
SMARTLOCK
SETUP
CC
STEREO
Press the CURSOR UP ▲ or
DOWN ▼ button until the word
CC (Closed Caption) is highlighted.
CC-1
Press the CURSOR RIGHT
ᮣ button to select the CLOSED
CAPTION option you want (CC-
OFF, CC-1, CC-2, or CC-MUTE).
Dialogue (and descriptions) for the
action on the captioned TV program
will appear onscreen.
PICTURE
SMARTLOCK
SETUP
CC
STEREO
1
4
POWER
CH+
2
5
8
0
3
6
CC-2
CH–
7
9
4
A/CH
CC
VOL–
NOTE: You can also set the
Closed Caption by pressing the CC
button on the remote. When pressed
repeatedly the screen will display the
options: CC-OFF, CC-1, CC-2, or
CC-MUTE.
TATUS
1
MENU
PICTURE
SMARTLOCK
SETUP
CC
STEREO
SLEEP
MUT
3
CC-MUTE
2
SMART HELP
Remember: The onscreen
menu will time out and disap-
pear from the screen when you fin-
ish, or you can press the
STATUS/EXIT button to clear the
menu from the screen.
4
CC-MUTE
NOTE: The CC-MUTE option
can be used to set the TV to
turn the Closed Caption mode
“ON” whenever the MUTE but-
ton on the remote is pressed.
This activates the CC-1 option.
MUTE will also appear in the
upper center of the screen.
JOHN: Why did they move the
meeting up to this week?
MARSHA: I don't know, but they
are pushing to close the deal.
CAPTION mode Example Display
15
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE SLEEP TIMER CONTROL
ave you ever fallen asleep in
Hfront of the TV only to have it
wake you up at two in the morning
with a test pattern screeching in
your ears? Well, your TV can save
you all that trouble by automatical-
ly turning itself off.
O MIN
BEGIN
Press the SLEEP button on the
remote control and the SLEEP timer
display will appear on the screen.
15 MIN
30 MIN
45 MIN
1
4
POWER
CH+
2
5
8
0
3
6
Press the SLEEP button
repeatedly to pick the amount of
time (in 15 minute increments up to
90 minutes) before the TV will turn
itself off.
CH–
7
9
A/CH
CC
VOL+
VOL–
STATUS
EXIT
2
An onscreen count down will appear
during the last minute before the TV
shuts itself off.
MENU
1
SLEEP
MUTE
SMART HELP
The onscreen menu will
time out and disappear from
the screen when you finish, or you
can press the STATUS/EXIT button
to clear the menu from the screen.
60 MIN
9 MIN
75 MIN
After the SLEEP timer has been set,
pressing the SLEEP button on the
remote will show the remaining time
before the TV will shut itself off.
50 SEC
90 MIN
During the last minute of a SLEEP
timer setting, an onscreen count down
will be displayed. Pressing any button
during the last minute will cancel the
SLEEP timer shutdown.
During the last 10 seconds of a
SLEEP timer setting, an onscreen
display will read GOOD BYE.
GOODBYE
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE TV FOR STEREO PROGRAMMING
our TV can detect a stereo sig-
Ynal and will set itself automat-
ically so the stereo sound can be
heard. However, there may be
occasions when you might want to
set the TV to mono. The following
steps describe how to change the
STEREO control:
BEGIN
PICTURE
SMARTLOCK
SETUP
CC
STEREO
Press the MENU button on
the remote to show the onscreen
menu.
NO
PICTURE
SMARTLOCK
SETUP
CC
STEREO
Press the CURSOR DOWN
▼ button until the word
STEREO is highlighted.
YES
Press the CURSOR RIGHT ᮣ
or CURSOR LEFT ᮤ but-
tons to choose between YES or
NO. (Yes sets the TV for Stereo
reception, NO sets the TV for
Mono reception.)
1
POWER
CH+
2
3
6
4
7
5
8
0
CH–
9
A/CH
CC
VOL+
VOL–
With YES selected, the television
will reproduce any stereo broad-
cast signal it receives. Please note
that you can force a stereo broad-
cast signal to MONO, but you
cannot force a mono broadcast
signal to stereo.
TATUS
1
MENU
SLEEP
MUT
3
2
SMART HELP
Remember: If stereo is not
present on a selected show and
the TV is placed in the STEREO
YES mode, the sound coming
from the set will remain monaural
(mono).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE TV VOLUME BAR CONTROL
se the Volume Bar control to see
Uthe TV’s volume level settings
on the TV screen. The Volume Bar
will be seen each time the VOLUME
buttons (on the TV or remote) are
pressed.
BEGIN
Press the VOL + button on the
remote to display the onscreen
Volume Bar. The VOL + button will
increase the sound level coming from
the television.
VOLUME
Press the VOL – button on the
remote to display the onscreen
Volume Bar. The VOL – button will
decrease the sound level coming from
the television.
1
POWER
CH+
2
3
6
4
7
5
8
0
CH–
9
1
A/CH
CC
VOL+
VOL–
STATUS
EXIT
MENU
SLEEP
MUTE
2
18
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE ALTERNATE CHANNEL CONTROL
our remote has an A/CH
Y(Alternate Channel) button.
Pressing this button will toggle
between the Current and one previ-
ously selected channel.
BEGIN
Press the CHANNEL (+) or (–)
buttons (or the NUMBER buttons)
to select a channel to view.
Press the NUMBER buttons to
select a second channel to view.
5
1
4
POWER
CH+
2
5
8
0
3
6
Press the A/CH (Alternate
channel) button repeatedly on the
remote to toggle between the cur-
rently viewed channel the previously
viewed channel.
2
CH–
7
9
1
A/CH
CC
VOL+
VOL–
12
STATUS
EXIT
MENU
SLEEP
MUTE
19
Download from Www.Somanuals.com. All Manuals Search And Download.
UNDERSTANDING THE SMARTLOCK™ FEATURE
he SmartLock feature is an inte-
Tgrated circuit that receives and
processes data sent by broadcast-
ers, or other program providers,
that contain program content advi-
sories. When programmed by the
viewer, a TV with SmartLock can
respond to the content advisories
and block program content that may
be found objectionable (such as
offensive language, violence, sexual
situations, etc.). This is a great fea-
ture to censor the type of viewing
children may watch.
G
PG
PG-13
R
NC 17
X
OFF
OFF
ON
ON
ON
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
OFF
ON
ON
Over the next few pages you’ll
learn how to block certain rated
programming. Below is a brief
explanation of some terms and rat-
ings you will find in the SmartLock
feature.
MOVIE RATINGS
TV PARENTAL GUIDELINES
(MOTION PICTURE ASSOCIATION OF AMERICA)
(TV BROADCASTERS)
G: General Audience - All ages admit-
ted. Most parents would find this pro-
gram suitable for all ages. This type of
programming contains little or no vio-
lence, no strong language, and little or no
sexual dialogue or situations.
TV-Y - (All children -- This program
TV
is designed to be appropriate for all
Y children.) Designed for a very young
audience, including children ages 2-6. This
type of programming is not expected to
frighten younger children.
SmartLock offers various
BLOCKING OPTION controls
from which to choose:
PG: Parental Guidance Suggested - This
programming contains material that parents
may find unsuitable for younger children.
It may contain one or more of the follow-
ing: Moderate violence, some sexual situa-
tions, infrequent coarse language, or some
suggestive dialogue.
TV-Y7 - (Directed to Older
TV
Children -- This program is designed
Y7 for children age 7 and above.) It may
MASTER DISABLE: This is what
might be called the "master switch"
for SmartLock. When in the ON
position, ALL blocking/censoring is
turned off (or disabled). When in the
OFF position, ALL blocking based
on specifically blocked settings will
take place.
be more appropriate for children who have
acquired the development skills needed to
distinguish between make-believe and reali-
ty. This programming may include mild fan-
tasy and comic violence (FV).
PG-13: Parents Strongly Cautioned - This
programming contains material that parents
may find unsuitable for children under the
age of 13. It contains one or more of the
following: violence, sexual situations,
coarse language, or suggestive dialogue.
TV-G - (General Audience -- Most
TV
parents would find this program suit-
Gable for all ages.) This type of pro-
BLOCK UNRATED: ALL unrated
programs based on the Movie
Ratings or Parental (TV) Guidelines
can be blocked if this feature is set
to ON and the MASTER DISABLE
feature is set to OFF.
gramming contains little or no violence, no
strong language, and little or no sexual dia-
logue or situations.
R: Restricted -This is programming is
specifically designed for adults. Anyone
under the age of 17 should only view this
programming with an accompanying parent
or adult guardian. It contains one or more
of the following: intense violence, intense
sexual situations, strong coarse language,
or intensely suggestive dialogue.
TV-PG - (Parental Guidance
TV
Suggested -- This program contains
material that parents may find unsuit-
PG
BLOCK NO RATINGS: ALL pro-
gramming with NO content advisory
data can be blocked if this feature is
set to ON and the MASTER DIS-
ABLE feature is set to OFF.
able for younger children.) This type of pro-
gramming contains one or more of the fol-
lowing: Moderate violence (V), some sexual
situations (S), infrequent coarse language
(L), or some suggestive dialogue (D).
NC 17: No one under the age of 17 will be
admitted. - This type of programming
should be viewed by adults only. It con-
tains graphic violence, explicit sex, or
crude indecent language.
After an access code has been pro-
grammed, you can block up to 6
ratings in both the TV and Movie
Ratings area. These ratings are pat-
terned by the Motion Pictures
Association of America and TV
broadcasters. (See description of rat-
ings on this page.)
TV-14 - (Parents Strongly
TV
Cautioned -- This program contains
14 some material that many parents
would find unsuitable for children under 14
years of age.) This type of programming
contains one or more of the following:
intense violence (V), intense sexual situa-
tions (S), strong coarse language (L), or
intensely suggestive dialogue (D).
X: Adults Only - This type of programming
contains one or more of the following: very
graphic violence, very graphic and explicit
or indecent sexual acts, very coarse and
intensely suggestive language.
TV-MA - (Mature Audience Only --
TV
This program is specifically designed
to be viewed by adults and therefore
MA
may be unsuitable for children under 17.)
This type of programming contains one or
more of the following: graphic violence (V),
explicit sexual situations (S), or crude inde-
cent language (L).
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE SMARTLOCK™ ACCESS CODE
ver the next few pages you’ll
Olearn how to block programs
and get a better understanding of
the rating terms for certain broad-
casts.
PICTURE
SMARTLOCK
SETUP
First, let’s start by learning how to
set a personal access code:
CC
SMARTLOCK
STEREO
BEGIN
MOVIE RATINGS
-- -- -- -- -- --
TV RATINGS
-- -- -- -- -- --
BLOCK UNRATED
ACCESS CODE
_ _ _ _
Press the MENU button on the
remote to display the onscreen
menu.
OFF
BLOCK NO RATING OFF
Press the CURSOR UP ▲ or
DOWN ▼ button until the word
SMARTLOCK is highlighted.
1
4
POWER
2
5
8
0
3
6
9
3
6
5
CH–
7
Press the CURSOR RIGHT
ᮣ button to display the SMART-
LOCK REVIEW screen.
A/CH
CC
VOL+
VOL–
ACCESS CODE
X X X X
ACCESS CODE
_ _ _ _
TATUS
1
INCORRECT CODE
MENU
Press the CURSOR RIGHT ᮣ
button. The onscreen display will
read, “ACCESS CODE ----.”
SLEEP
MUT
4
2
8
7
Using the NUMBERED but-
tons, enter 0, 7, 1, 1. “XXXX”
appears on the Access Code screen
as you press the numbered buttons.
ACCESS CODE
_ _ _ _
ACCESS CODE
X X X X
PLEASE ENTER AGAIN
If the 0, 7, 1, 1 code is correctly
entered, proceed to step 7.
PLEASE ENTER AGAIN
If you enter a wrong digit,
“INCORRECT CODE” will
appear on the screen, and you will
be asked to “PLEASE ENTER
AGAIN.”
BLOCK
CHANGE CODE
BLOCK
CHANGE CODE
CHANGE CODE
_ _ _ _
Enter the 0, 7, 1, 1 code again.
Press the CURSOR DOWN ▼
button until the words CHANGE
CODE are highlighted.
Press the CURSOR RIGHT ᮣ
button to change your personal
Access Code.
CONFIRM CODE
— — — —
CHANGE CODE
X X X X
“Next enter a “new” 4 digit
code using the NUMBERED but-
tons. The screen will then ask you
to confirm the code you just
CONFIRM CODE
X X X X
entered. Enter your new code
again. “XXXX” will appear when
you enter your new code.
After the new code has been confirmed, the on-screen menu will return to the BLOCK
option. Continue through the next few pages to learn how to block program ratings.
After confirming the new code the
onscreen menu will return to the
BLOCK option.
Parents - it isn’t possible for your child to
unblock a channel without knowing your
access code or changing it to a new one. If
your code changes, and you didn’t change it,
then you know it’s been altered by someone
else and blocked channels have been viewed.
NOTE: The 0,7,1,1 access code
shown on this page is the default
code or a way to reset the code
when the current access code is
not known.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE SMARTLOCK™ BLOCKING OPTIONS
fter your personal access code
Ahas been set (see previous
page), SmartLock offers the viewer
special blocking options. With these
Blocking Options, the censoring
controls can be turned ON or OFF.
BEGIN
Press the MENU button on the
remote to show the onscreen menu.
Press the CURSOR UP ▲ or
DOWN ▼ button until the words
SMARTLOCK are highlighted.
PICTURE
SMARTLOCK
SETUP
CC
STEREO
SMARTLOCK
MOVIE RATINGS
ACCESS CODE
_ _ _ _
-- -- -- -- -- --
TV RATINGS
-- -- -- -- -- --
Press the CURSOR RIGHT
ᮣ button to display the SMART-
LOCK REVIEW screen.
BLOCK UNRATED
OFF
BLOCK NO RATING OFF
Press the CURSOR RIGHT
ᮣ button. The onscreen display
will read “ACCESS CODE ----.”
1
4
POWER
2
5
8
0
3
6
Enter the correct access code
number. “XXXX” shows on the
Access Code display as you press
the NUMBERED buttons.
5
CH–
7
A/CH
CC
VOL+
VOL–
BLOCK
CHANGE CODE
ACCESS CODE
X X X X
TATUS
1
The onscreen menu will change
with the word BLOCK highlighted.
Press the CURSOR RIGHT ᮣ
button to display the blocking
options.
MENU
SLEEP
MUT
3
4
2
6
7
8
Press the CURSOR DOWN ▼
button to highlight MASTER DIS-
ABLE, BLOCK UNRATED, or
BLOCK NO RATING.
MOVIE RATINGS
TV RATINGS
MASTER DISABLE
BLOCK UNRATED
BLOCK NO RATING
ON
OR OFF
MASTER DISABLE: This is what
might be called the "master switch"
for SmartLock. When in the ON
position, ALL blocking/censoring
is turned off (or disabled). When in
the OFF position, ALL blocking
based on specifically blocked set-
tings will take place.
MOVIE RATINGS
TV RATINGS
MASTER DISABLE
BLOCK UNRATED
BLOCK NO RATING
ON
OR OFF
BLOCK UNRATED: ALL unrated
programs based on the Movie
Ratings or Parental (TV)
Guidelines can be blocked if this
feature is set to ON and the MAS-
TER DISABLE feature is set to
OFF.
MOVIE RATINGS
TV RATINGS
MASTER DISABLE
BLOCK UNRATED
BLOCK NO RATING
ON
OR OFF
BLOCK NO RATINGS: ALL pro-
gramming with NO content adviso-
ry data can be blocked if this fea-
ture is set to ON and the MASTER
DISABLE feature is set to OFF.
If the BLOCK UNRATED or BLOCK NO RATINGS
controls are turned ON, all unrated programs and pro-
grams containing NO content advisory data will display
the screen shown to the left. To watch the channel enter
your access code, or change the BLOCK UNRATED
and BLOCK NO RATINGS back to off.
BLOCKED BY NO RATING
ENTER ACCESS CODE
— — — —
Press the CURSOR RIGHT ᮣ
button to select ON (block) or
OFF (do not block).
22
Download from Www.Somanuals.com. All Manuals Search And Download.
BLOCK PROGRAMMING USING MOVIE RATINGS
SMART
HELP
here are two types of program
Tratings within the SmartLock
feature. One is based on the Movie
Industry ratings while the other is
based on the TV Industry ratings.
Both can be used to block or censor
programming that has been rated in
either manner.
Remember:
Selecting to
block any rating
will cause all the
higher ratings to
also be blocked
automatically.
PICTURE
SMARTLOCK
SETUP
CC
STEREO
SMARTLOCK
MOVIE RATINGS
-- -- -- -- -- --
TV RATINGS
Let’s first look at the Movie Rating
options of SmartLock:
-- -- -- -- -- --
BLOCK UNRATED
BLOCK NO RATING OFF
OFF
BEGIN
Press the MENU button on the
remote to display the onscreen
menu.
1
4
POWER
2
5
8
0
3
6
5
ACCESS CODE
_ _ _ _
Press the CURSOR UP ▲ or
DOWN ▼ button until the word
SMARTLOCK is highlighted.
CH–
7
A/CH
CC
VOL+
VOL–
TATUS
1
MENU
Press the CURSOR RIGHT
ᮣ button to display the SMART-
LOCK REVIEW screen.
ACCESS CODE
X X X X
SLEEP
MUT
3
4
2
6
8
7
Press the CURSOR RIGHT ᮣ
button. “ACCESS CODE – – – –”
will appear.
BLOCK
CHANGE CODE
Using the NUMBERED but-
tons on the remote, enter your
Personal Access Code.
MOVIE RATINGS
TV RATINGS
MASTER DIABLE
BLOCK UNRATED
BLOCK NO RATING
With the word BLOCK high-
lighted, press the CURSOR
RIGHT ᮣ button.
With the words MOVIE RAT-
INGS highlighted, press the CUR-
SOR RIGHT ᮣ button to display
the MOVIE RATINGS (G, PG,
PG-13, R, NC17, or X).
G
PG
PG-13
R
NC 17
X
OFF
When highlighted, all these options
can be turned ON (which will allow
blocking) or OFF (which will allow
viewing).
G
PG
ON
BLOCKED BY
R
ENTER ACCESS CODE
_ _ _ _
PG-13
R
NC 17
X
Use the CURSOR RIGHT ᮣ
or CURSOR LEFT ᮤ buttons on
the remote to turn the rating option
ON or OFF.
Screen will display a message when programming is
NOTE: When a rating is turned ON, all
higher ratings will automatically be turned
ON. To turn them OFF, each will have to be
set individually. (i.e., R blocked manually,
NC-17 and X will be blocked automatically.)
blocked by the Movie Rating feature. To unblock, turn
the Movie Rating OFF, or enter your personal access
code. Entering the code will unblock ALL blocked
Movie Ratings until the TV is turn off. Then the
blocked ratings will be reset to ON.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
BLOCK PROGRAMMING USING TV RATINGS
SMART
HELP
his portion of the SmartLock
Tfeatures cover program ratings
based on the TV Industry rating
system. This is know as TV RAT-
INGS within SmartLock.
Remember:
Selecting to
block any rating
will cause all the
higher ratings to
also be blocked
automatically.
After selecting the SmartLock fea-
ture and entering your personal
access code, the BLOCK/CHANGE
CODE screen appears;
PICTURE
SMARTLOCK
SETUP
CC
STEREO
ACCESS CODE
_ _ _ _
BEGIN
With the word BLOCK high-
lighted, Press the CURSOR
RIGHT ᮣ button.
1
Scroll the menu using the
CURSOR UP ▲ or CURSOR
DOWN ▼ buttons until the words
TV RATINGS are highlighted.
BLOCK
CHANGE CODE
1
4
POWER
CH+
2
5
8
0
3
6
ACCESS CODE
X X X X
CH–
7
9
A/CH
CC
V
2
Press the CURSOR RIGHT ᮣ
button to display the TV RAT-
INGS (TV-Y, TV-Y7, TV-G, TV-
PG, TV-14, or TV-MA).
VOL–
STATUS
EXIT
MENU
SLEEP
MUT
1
When highlighted, the TV-Y and
TV-G can be turned ON (which will
allow blocking), or OFF (which
will allow viewing), for these rated
programs.
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
OFF
3
MOVIE RATINGS
TV RATINGS
MASTER DIABLE
BLOCK UNRATED
BLOCK NO RATING
2
4
The ratings of TV-Y7, TV-PG,
TV-14, TV-MA can be cus-
tomized to block V (violence), FV
(fantasy violence), S (sexual situa-
tions), L (coarse language), or D
(suggestive dialogue).
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ON
TV RATING
SUB MENUS:
Use the CURSOR RIGHT ᮣ or
CURSOR LEFT ᮤ buttons on the
remote to turn the rating option ON
or OFF.
TV-Y7
FV
ON
ON
OR OFF
OR OFF
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
TV-Y - (All children -- This program is designed to be appropriate for all children.)
Designed for a very young audience, including children ages 2-6. This type of pro-
gramming is not expected to frighten younger children.
TV-PG
ON
ON
ON
ON
ON
OR OFF
OR OFF
OR OFF
OR OFF
OR OFF
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
V
S
L
D
TV-Y7 - (Directed to Older Children -- This program is designed for children age 7
and above.) It may be more appropriate for children who have acquired the develop-
ment skills needed to distinguish between make-believe and reality. This program-
ming may include mild fantasy and comic violence (FV).
TV-G - (General Audience -- Most parents would find this program suitable for all
ages.) This type of programming contains little or no violence, no strong language
and little or no sexual dialogue or situations.
TV-14
ON
ON
ON
ON
ON
OR OFF
OR OFF
OR OFF
OR OFF
OR OFF
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
V
S
L
D
TV-PG - (Parental Guidance Suggested -- This program contains material that par-
ents may find unsuitable for younger children.)This type of programming contains
one or more of the following: some suggestive dialogue (D), infrequent coarse lan-
guage (L), some sexual situations (S), or moderate violence (V).
TV-14 - (Parents Strongly Cautioned -- This program contains some material that
many parents would find unsuitable for children under 14 years of age.) This type of
programming contains one or more of the following: intensely suggestive dialogue
(D), strong coarse language (L), intense sexual situations (S), or intense violence (V).
TV-MA
ON
ON
ON
ON
OR OFF
OR OFF
OR OFF
OR OFF
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
V
S
L
TV-MA - (Mature Audience Only -- This program is specifically designed to be
viewed by adults and therefore may be unsuitable for children under 17.) This type of
programming contains one or more of the following: crude indecent language (L),
explicit sexual situations (S), or graphic violence (V).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE SMARTLOCK™ REVIEW SCREEN
ow that you’ve learn how to
Nblock or censor your viewing
using the Movie Ratings or TV
Ratings let’s review what you’ve
done. The SmartLock Review fea-
ture allows you to see what has
been blocked. Whenever the
SmartLock Feature is accessed
within the onscreen menu a review
screen will be displayed showing
what ratings or blocking options
have been turned on.
PICTURE
SMARTLOCK
SETUP
CC
STEREO
SMARTLOCK
MOVIE RATINGS
-- -- PG-13 R NC-17 X
TV RATINGS
-- Y7 -- -- 14 MA
BEGIN
BLOCK UNRATED
BLOCK NO RATING OFF
OFF
Press the MENU button on the
remote to show the onscreen menu.
Press the CURSOR UP ▲ or
DOWN ▼ button and highlight
the word SMARTLOCK.
1
2
POWER
CH+
3
6
The SMARTLOCK REVIEW screen will
not appear if the MASTER DISABLE
option is set to ON.
4
7
5
8
0
CH–
9
Press the CURSOR RIGHT
ᮣ button to display the SMART-
LOCK REVIEW screen.
A/CH
CC
VOL+
VOL–
TATUS
1
This menu will display what Movie
Ratings have been blocked or what
TV Ratings have been blocked.
This review screen will also display
the status of Unrated and No Rating
settings. If the Master Disable fea-
ture has been turned ON, the
MENU
SLEEP
MUT
3
2
SMARTLOCK REVIEW screen
will not be displayed.
SMARTLOCK - This control is where to enter the SMARTLOCK feature
when changes need to be made or to change the Personal Access Code.
MOVIE RATINGS - Shows all blocked Movie Ratings that were set within
the MOVIE RATINGS feature. All or some may be blocked at one time.
Note: If a lower rating is blocked; this will automatically cause the higher
ratings to be blocked also. (ie.; if R is set to be blocked, X will automatically
be blocked also.)
SMARTLOCK
TV RATINGS - Shows all blocked TV Ratings that were set within the fea-
ture. All or some may be blocked at one time. Note: If a lower rating is
blocked; this will automatically cause the higher ratings to be blocked also
(i.e.; if TV-14 is set to be blocked, TV-MA will automatically be blocked).
TV Ratings also have sub ratings for Violence (V), Fantasy Violence (FV),
Sexual Situations (S), Coarse Language (L), and Suggestive Language (D).
If the main rating is turned off but the sub rating is turned ON, the program
will be blocked but the rating will not appear within the SmartLock Review
menu.
MOVIE RATINGS
-- -- PG-13 R NC-17 X
TV RATINGS
-- Y7 -- -- 14 MA
BLOCK UNRATED OFF
BLOCK NO RATING OFF
BLOCK UNRATED - Shows ON or OFF depending on the status of the
BLOCK UNRATED feature. Based on the Movie Ratings or TV Ratings.
BLOCK NO RATING - Shows ON or OFF depending on the status of the
BLOCK NO RATING feature. Based on programming with NO content
advisory data.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If you experience any trouble or are confused about a certain function of your television, please read through
this troubleshooting section before calling for service. These tips can save you time and money since charges
for TV installation and adjustment of customer controls are not covered under this television’s warranty.
CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or TV information
channel) which shows a constant non-moving pattern on the TV screen, can cause picture tube damage.
When your TV is continuously used with such a source the pattern of the non-moving portion of the game
(CDI, etc.) could leave an image permanently on the picture tube. When not in use, turn the video source
OFF. Regularly alternate the use of such video sources with normal TV viewing.
No Power ...
Check the television power cord. Unplug the television for 10 seconds, then reinsert
the plug into the AC outlet and press the POWER button on the TV or remote.
Check the wall outlet for power. Make sure the outlet is not connected to a wall
switch that has been turned off. Be sure a fuse or circuit breaker hasn’t been blown
or tripped.
If using an AC power strip or surge suppressor; check for a blown fuse.
No Picture ...
First check the antenna/cable connection to the back of the television. Are they
secured properly to the television’s 75Ω Input?
Check the Cable Control for the correct setting. If cable channels are present, set the
Cable Control to ON. If normal antenna broadcast channels; set the Cable Control to
OFF.
Try activating the Auto Program Control to add any available channels to the televi-
sion’s memory.
No Sound ...
Check the Volume setting by pressing the Volume + button on the television or the
remote control.
Check the Mute button on the remote control.
Check the antenna/cable connection to the back of the television. Are they secured
properly to the television’s 75Ω Input?
Remote Won’t Work ...
Check remote batteries. Replace with AA Heavy Duty (Zinc Chloride) or Alkaline
batteries if necessary.
Be sure to point the remote at the front of the television when sending commands.
Clean the remote sensor on the front of the remote control unit.
Unplug the television from the wall outlet, wait 10 seconds and reinsert the plug into
an outlet. Power the television on again and try the remote once more.
Check to see if there is any damage to the remote case. Look for cracks or acid from
old batteries. In this case the remote may have to be replaced.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
TV Will Not Display Any
Channel Above 13 ...
Try repeating the channel selection again.
Check the Cable Control feature. Be sure to set the control to ON if cable broadcast-
ing is present.
Activate the Auto Program Control to add all available channels to the television’s
memory.
Try “Saving” the channel(s) manually in the television’s memory using the Channel
Edit Control.
Can’t remember my
Access Code for
SMARTLOCK ...
Remember, there is a default code that can always be used if the current code is for-
gotten. Press 0, 7, 1, 1 to enter the SMARTLOCK feature and set a new personal
access code.
CLEANING AND CARE
• To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.
• When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using
anything abrasive). Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes
when cleaning.
• Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water. Use a
clean dry cloth to dry the wiped surfaces.
• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent
marring of the cabinet finish.
GLOSSARY TO TELEVISION TERMS
Coaxial Cable • A single solid antenna wire normally matched
with a metal plug (F-type) end connector that screws (or pushes)
directly onto a 75 Ohm input found on the Television or VCR.
Menu • An onscreen listing of feature controls shown on the
Television screen that are made available for user adjustments.
Programming • The procedure of adding or deleting channel
numbers into the Television’s memory circuits. In this way the
Television “remembers’’ only the locally available or desired
channel numbers and skips over any unwanted channel numbers.
Closed Caption • Broadcast standard which allows you to read
the voice content of television programs on the TV screen.
Designed to help the hearing impaired this feature uses onscreen
"text boxes" to show dialogue and conversations while the TV
program is in progress.
Remote Sensor Window • A window or opening found on the
Television control panel through which infrared remote control
command signals are received.
Audio/Video Inputs • Located on the front of the TV these con-
nectors (RCA phono type plug) are used for the input of audio
and video signals. Designed for use with VCRs (or other acces-
sories) in order to receive higher picture resolution and offer
sound connection options.
Twin Lead Wire • The more commonly used name for the two
strand 300 Ohm antenna wire used with many indoor and outdoor
antenna systems. In many cases this type of antenna wire requires
an additional adapter (or balun) in order to connect to the 75 Ohm
Input terminals designed into the more recent Televisions and
Onscreen Displays (OSD) • Refers to the wording or messages
generated by the television (or VCR) to help the user with specific VCRs.
feature controls (color adjustment, programming, etc.).
27
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
Accessories/Optional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7
Adapter Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7
Add/Delete Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-13
Alternate Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Antenna/Cable Hookup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6
Audio/Video Input Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Cable TV Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Channel Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Channel Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Closed Captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Contrast Plus (Black Stretch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Controls/TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Controls/Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Glossary TV Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Language Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Memory/Program Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Menu Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Minus(-)/Plus (+) Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Picture Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Precautions/Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Programming Channels (Automatically) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Requesting Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29-30, 32
Round 75Ω Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7
Safety/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Sensor Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Set Up/First Time Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-13
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
SmartLock - Understanding the Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
SmartLock Access Code Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
SmartLock Blocking Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
SmartLock Movie Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
SmartLock Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
SmartLock TV Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Status Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Stereo Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Tips for Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29-30, 32
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-27
VCR/TV Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Volume Bar Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Philips Consumer Electronics Company
Factory Service Center Locations
Detroit/Toledo
•
Cleveland/
•
•
N Ohio •
•
Chicago
★ Columbus
•
San Francisco/Metro Area
★Los Angeles
Charlotte
★
•
★Pittsburgh/WV Area
Knoxville/E Tennessee
•
•
•
Philadelphia/S New Jersey
Atlanta/N Georgia
• Dallas
★Wash/Balt
★Orlando
•
Houston/Galveston
Beaumont
Tampa/W Florida
★Ft. Myers/SW Florida
•
★Indicates In-Home Service Only
1-800-242-9225
★Miami/SE Florida
• Indicates In-Home/Carry-In Service
NOTE: If you reside in one of our Philips Factory Service Branch areas (see directory on back), you can contact the nearest Service Branch to
obtain efficient and expedient repair for your product. If your product is In-Warranty, you should have proof-of-purchase to ensure No Charge
Service. For Out-of-Warranty service, call the location nearest you.
NOTA: Si vous résidez dans une des régions desservies par une succursale de service après vente du fabricant Philips (voir liste ci-dessous),
vous pourrez contacter la branche de service après vente la plus près de chez vous pour obtenir un service après vente rapide et efficace. Si le
produit est sous garantie, il suffira de présenter une preuve d`achat pour bénéficier d'un service sans frais. Pour les produits non couverts par la
garantie, contactez le centre le plus près de chez vous.
NOTA: Si Ud. reside en una de nuestras zonas para sucursales Philips de servicio al de fábrica (ver directorio más abajo), Ud. puede comunicarse
con la sucursal de servicio más cercana para obtener una reparación oportuna y eficaz de su producto. Si su producto está todavía bajo garan-
tía, Ud. debe presentar comprobante de compra para no ocasionar ningunos cargos por servicio. Para servicio después del vencimiento de la
garantía, llame al lugar más cercano de los abajo indicados.
In Canada
How you can obtain efficient and expedient carry-in, mail-in, or in-home service for your product
Please contact Philips at
1-800-661-6162 (French speaking)
1-800-363-7278 (English speaking)
Au Canada
Comment obtenir le service après-vente pour les produits apportés ou envoyés par la poste à notre centre de service ou le service à domicile
Veuillez contacter philips á:
1-800-661-6162 (Francophone)
1-800-363-7278
En el Canadá
Cómo recibir servicio efficiente para su producto, en persona, por correo o a domicillo
Favor de comunicarse con Philips al:
1-800-661-6162 (francófono)
1-800-363-7278 (anglófono)
EL4482-3 Rev. BB
3135 015 07541
MAC2929 12/99
29
Download from Www.Somanuals.com. All Manuals Search And Download.
QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE CENTER
NEAR YOU. YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT CARRY-IN, MAIL-IN, OR IN-HOME SERVICE, AND YOU WILL RECEIVE PEACE OF MIND,
KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPS’ FACTORY SERVICE. AND, IF THE PHONE NUMBER LISTED FOR YOUR AREA
IS LONG DISTANCE, CALL 1-800-242-9225 FOR FACTORY SERVICE.
COMMENT OBTENIR NOTRE SERVICE APRÈS VENTE RAPIDE ET EFFICACE SOIT PAR COURRIER, À DOMICILE, OU EN SE PRÉSENTANT À UN CENTRE DE SERVICE PHILIPS. PLUS DE 600 CENTRES
DE RÉCEPTION DE PRODUITS À RÉPARER À TRAVERS LE PAYS: CONTACTER LE CENTRE DE SERVICE AUX CONSOMMATEURS LE PLUS PROCHE POUR SAVOIR L’EMPLACEMENT DE CES DÉPÔTS
DANS UN RAYON DE 50 À 75 MILES (80 KM À 120 KM) DU CENTRE DE SERVICE LOCAL.
CÓMO OBTENER UN SERVICIO OPORTUNO Y EFICIENTE POR CORREO, EN CASA O EN PERSONA PARA SU PRODUCTO A TRAVÉS DE UN CENTRO PHILIPS DE SERVICIO. MAS DE 600 SITIOS POR
TODO EL PAIS PARA LA RECEPCION DE PRODUCTOS NECESITADOS DE REPARACIONES: COMUNICARSE CON EL CENTRO DE SERVICIO DE FABRICA MAS CERCANO PARA ESTOS LUGARES DENTRO
DE UN RADIO DE 80 A 120 KM (50 A 75 MILLAS) DEL CENTRO DE SERVICIO LOCAL.
GEORGIA
CENTRAL U.S.A.
ILLINOIS
Philips Factory Service of Georgia
200 N. Cobb Pkwy., Suite 120
Marietta, GA 30062
Philips Factory Service Central US
950 Keynote Circle
Brooklyn Heights, OH 44131
(216) 741-3334
Philips Factory Service of Illinois
1279 W. Hamilton Pkwy.
Itasca, IL 60143
(770) 795-0085
(630) 775-0990
FLORIDA
MICHIGAN
TENNESSEE
Philips Factory Service of Florida
1911 US Highway 301 North
Tampa, FL 33619
Philips Factory Service of Michigan
25173 Dequindre
Madison Heights, MI 48071
(248) 544-2110
Philips Factory Service of East Tennessee
6700 D Papermill Rd.
Knoxville, TN 37919
(813) 621-8181
(423) 584-6614
WESTERN U.S.A.
DALLAS AREA
MID-ATLANTIC
Philips Factory Service Western Region
681 East Brokaw Rd.
San Jose, CA 95112
Philips Factory Service of Dallas
415 N. Main Street, #107
Euless, TX 76040
Philips Factory Service Mid-Atlantic
352 Dunks Ferry Rd.
Bensalem, PA 19020
(215) 638-7500
(408) 436-8566
(713) 682-3990
TEXAS
Philips Factory Service of Texas
1110 N. Post Oak Rd., Suite 100
Houston, TX 77055
(713) 682-3990
MAC2929 12/99
30
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
31
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED W ARRANTY
CO LO R TELEVISIO N
90 Days Free Labor
One Year Free Replacement of Parts (Two Years Free Replacement on Color Picture Tube)
This product must be carried in for repair.
W HO IS CO VERED?
MAKE SURE YO U KEEP...
You must have proof of purchase to receive warranty service. A sales
receipt or other document showing that you purchased the product is
considered proof of purchase.
Please keep your sales receipt or other document showing proof of
purchase. Attach it to this owner’s manual and keep both nearby.
Also keep the original box and packing material in case you need to
return your product.
W HAT IS CO VERED?
BEFO RE REQ UESTING SERVICE...
Please check your owner’s manual before requesting service.
Adjustments of the controls discussed there may save you a service
call.
Warranty coverage begins the day you buy your product. For 90 days
thereafter, all parts will be repaired or replaced free, and labor is free.
From 90 days to one year from the day of purchase, all parts will be
repaired or replaced free, but you pay for all labor charges. From one
to two years from the day of purchase, you pay for the replacement or
repair of all parts except the picture tube, and for all labor charges.
After two years from the day of purchase, you pay for the replacement
or repair of all parts, and for all labor charges.
TO GET W ARRANTY SERVICE IN U.S.A.,
PUERTO RICO O R U.S. VIRGIN ISLANDS...
Contact a Philips factory service center (see enclosed list) or autho-
rized service center to arrange repair.
All parts, including repaired and replaced parts, are covered only for
the original warranty period. When the warranty on the product
expires, the warranty on all replaced and repaired parts also expires.
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties,
including implied warranties of merchantability and fitness for a partic-
ular purpose, are limited in duration to the duration of this express
warranty. But, because some states do not allow limitations on how
long an implied warranty may last, this limitation may not apply to
you.)
W HAT IS EXCLUDED?
Your warranty does not cover:
•
labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of
antenna systems outside of the product.
TO GET W ARRANTY SERVICE IN CANADA...
Please contact Philips at:
•
product repair and/or part replacement because of misuse, acci-
dent, unauthorized repair or other cause not within the control of
Philips Consumer Electronics Company.
1-800-661-6162 (French Speaking)
1-800-363-7278 (English Speaking)
•
•
reception problems caused by signal conditions or cable or antenna
systems outside the unit.
a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.
(In Canada, this warranty is given in lieu of all other warranties. No
other warranties are expressed or implied, including any implied war-
ranties of merchantability or fitness for a particular purpose. Philips is
not liable under any circumstances for any direct, indirect, special, inci-
dental or consequential damages, howsoever incurred, even if notified
of the possibility of such damages.)
•
incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or consequen-
tial damages, so the above exclusion may not apply to you. This
includes, but is not limited to, prerecorded material, whether copy-
righted or not copyrighted.)
REMEMBER...
• a product used for commercial or institutional purposes.
Please record the model and serial numbers found on the product
below. Also, please fill out and mail your warranty registration card
promptly. It will be easier for us to notify you if necessary.
W HERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where the product is offi-
cially distributed by Philips Consumer Electronics Company. In coun-
tries where Philips Consumer Electronics Company does not distribute
the product, the local Philips service organization will attempt to pro-
vide service (although there may be a delay if the appropriate spare
parts and technical manual(s) are not readily available).
MODEL # ________________________________________________
SERIAL # ________________________________________________
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Philips Consum er Electronics Com pany, P.O . Box 2976, Longview, Texas 75606, (903) 242-4800
Printed in the U.S.A.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
|