DCR 5012
NL
EN
Digitale Kabelontvanger
Digital Cable Receiver
2
61
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Important
Take time to read this User Manual before using the Digital Cable Receiver.
It contains important information and notes regarding how to operate it.
Disposal of your old product
Your product is designed and manufactured with high quality materials
and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product or
its packaging, it means the product is covered by European Directive
2002/96/EC.
Please inform yourself about the local separate collection process for
electrical and electronic products.
Please act according to your local rules and do not dispose of your old
products with your normal household waste.The correct disposal of
your old product will help prevent potential negative consequences for
the environment and human health.
The “Material recyclability symbol” affixed on package cardboard and
user manual means these parts are recyclable.
So do not dispose of them with your normal household waste.
The “Material recyclability symbol” affixed on plastic packaging parts
means these parts are recyclable.
So do not dispose of them with your normal household waste.
The “Green Dot” affixed on cardboard means PHILIPS pays a financial
duty to the “Avoidance and Recovery of PackagingWaste” organization.
Danger
Describes situations of injury or loss of life.
Warning
Describes actions that may cause damage to the product.
Caution
Describes the actions required to avoid dangerous or illegal situations.
Note
Additional information.
Tip
Information that is useful to know but not essential to the task. For example, information about
alternative use.
63
Important
Download from Www.Somanuals.com. All Manuals Search And Download.
The Digital Cable Receiver has been manufactured to meet the appropriate safety standards, but the
instructions below must be followed to operate it safely.These instructions must be kept for future
reference.
Danger
• The Digital Cable Receiver does not contain any user-serviceable parts. Do not attempt to open
it. All maintenance work must be carried out by qualified services centres.
• Make sure that children do not place any foreign objects in any of the openings.
Warnings
• Before connecting the Digital Cable Receiver to the mains, check that the mains supply voltage
corresponds to the voltage printed on the rear of the Digital Cable Receiver. If the mains voltage
is different, consult your dealer.
• If you disconnect the Digital Cable Receiver from the mains, make sure to unplug it from the wall
socket and not just from the AC socket at the back of the unit. Children could seriously injure
themselves, as the free end of the cable is still live.
• It is recommended to unplug the Digital Cable Receiver from the mains during lightning storms.
• If the power cord is damaged, it must be replaced.Always refer to qualified centres.
• To prevent fire or shock hazard, do not expose the Digital Cable Receiver to rain or moisture.
• The Digital Cable Receiver should be placed on a firm surface, and the ventilation openings must
not be covered with items, such as newspapers, table clothes, curtains, etc.
• Do not install the Digital Cable Receiver near heat sources such as radiators, stoves or other
apparatus that produce heat. Protect it from direct sunlight.
• When installing the Digital Cable Receiver, ensure there is a gap of approximately 5 cm around the
Digital Cable Receiver to enable air to circulate freely and prevent overheating.
• Leave accessible the mains connector at the back of the unit in case emergency shutdown is
required.
• Do not place any combustible objects on the Digital Cable Receiver (candles, etc.).
• No objects filled with liquids, such as vases, shall be placed on the unit.The Digital Cable Receiver
shall not be exposed to dripping or splashing. Should this happen, disconnect the Digital Cable
Receiver from the mains and consult your dealer.
Refer also to the cautions throughout this manual.
Important
64
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Your Digital Cable
Receiver
Bring the future into your home with UPC
DigitalTV. You can enjoy enhanced picture and
sound quality, a wider selection of channels and
special setup options.
UPC DigitalTV HD will continuously be
extended to include even more features and HD
channels. UPC DigitalTV HD is received via the
Digital Cable Receiver.
What are the benefits of UPC DigitalTV
and the Digital Cable Receiver?
• Razor-sharp picture and perfect sound
quality.
• MoreTV channels. Apart from the current
channels on offer, you can choose from
additional UPC DigitalTV channels.
• More radio channels.Apart from the
current radio channels available via the
cable, dozens more digital radio channels
can be received.
• You can use UPC On Demand to watch
top films whenever you want.
• ATV guide always on hand.The UPCTV
Guide is an easy-to-use programme guide
you can view on screen.All programme
details are on hand at all times.
• Special settings such as blocking channels
using a PIN code and language settings.
• Interactive Services. Games can be played
via the television.
• You are equipped for the future. New
features are regularly added to the Digital
Cable Receiver. We will keep you informed
of new features and interactive services via
Additional benefits of the Digital Cable
Receiver - HDTV
• Intense colours, more details, razor sharp
picture and multichannel surround sound
(Dolby 5.1).
65
Your Digital Cable Receiver
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1
What’s in the box?
UPC smart card (already
inserted)
Digital Cable Receiver
Confirmation card
Quick Start Guide
User manual
Remote control and
2 batteries
HDMI cable
Coaxial cable
Power cord
Caution
Plastic bags can be dangerous.
To avoid suffocation keep the bag away from babies and children.
3.2
What you also need
+
Subscription to UPC Digital
TV HD
HDTelevision
Your Digital Cable Receiver
66
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3
Overview
Main unit
A
B
Standby
Status led
C Navigation buttons
D Smart card door
A B
C
D
Main unit
L K
Main unit backside
A
B
RF OUT*
J
I
ETHERNET2*
C USB*
D L/R audio* (analogue)
E
F
TV scart*
Optical Digital audio*
A
B C D
E
F G
H
Main unit backside
G HDMI*
H Power**
I
AUX scart*
SPDIF* (digital)
RF IN*
J
K
L
ETHERNET1*
*
Safety extra low voltage
Hazardous voltage
A
B
**
Remote control unit
A
B
Standby
Alphanumeric keypad
C Navigation keys
D Volume/channel control and Back key
C
D
Remote control unit
67
Your Digital Cable Receiver
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4
Main menu overview
4
Getting started
Press menu on the remote control to
access the main menu.
In this chapter, the basic steps to get you started
are described.
Call the UPC Customer Service department
at 0900-5008080 (€ 0.10 per minute) available
Monday to Friday 8AM to 9PM and Saturday
from 8AM to 6PM to activate the product.
4.1
Prepare
Prepare the remote control
Use the arrow keys
/
/
/
to navigate
through the different options.
Press OK to validate your choice.
Note
For menu full overview, see Chapter 5.
3.5 How to read this manual
Danger
Open the battery compartment.
Insert the two batteries supplied according
to the indications (+/-) inside the
compartment.
Describes situations of injury or loss of life.
Warning
Describes actions that may cause damage to the
product.
Close the battery compartment.
Note
Caution
Point the remote control directly at the remote
sensor on the front panel and select the desired
function.
Describes the actions required to avoid
dangerous or illegal situations.
Note
Caution
Additional information.
Do not mix batteries or keep them in the remote
control for long periods of time without use.
Batteries must not be disposed of with your
household waste but to a local separate battery
collection system.
Tip
Information that is useful to know but not
essential to the task. For example, information
about alternative use.
Do not dispose of batteries in a fire.
Getting started
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Check the smart card
Note
Check whether the UPC smart card is inside the For scart connection, refer to chapter 7.2.
front slot of the Digital Cable Receiver.
4.3
Install
Before you start installation, make sure you have
made all the required connections.
Switch on yourTV set.The country selection
screen appears. In that case, the Digital
Cable Receiver has automatically started up
at connecting.
If this is not the case, slide it in the slot:
• Open the smart card door on the right
side of the box.
• Insert the smart card into the smart card slot
as far as it will go.The end of the card will be
visible from outside the slot.
Warning
Insert the smart card with the chip facing down.
4.2
Connect
Danger
Risk of electric shock!
Make sure all the devices are disconnected from
the mains before making any connections.
Note
If you can’t you see the country selection screen,
switch on the Digital Cable Receiver by pressing
at the front of the Digital Cable Receiver or
press the remote control. In case you still can’t
see this screen, check whether yourTV is set to
the right A/V (Audio/Video) channel.
HDMI connection
CableWall
Socket
Digital Cable Receiver
Read the manual of yourTV set if you do not
know how to set the A/V channel. In case you
still can’t see the screen, check all connections
and start installation again. If everything is
properly connected and you still can’t see the
country selection screen, after multiple efforts,
please contact UPC Customer service.
TV set
Connect the coaxial cable from the cable
wall socket to the RF IN socket at the rear
of the Digital Cable Receiver.
Warning
Connect the HDMI cable to the HDMI input Do not switch off the Digital Cable Receiver
of theTV set and to the HDMI socket at
the rear of the Digital Cable Receiver.
Plug your Digital Cable Receiver to the
mains using the supplied power cord.The
front display panel indicates Init, then UPC.
during activation.
Also pay special attention to children, so that
they cannot interrupt activation, for example by
pulling the plug from the socket of by pressing
on it.
69
Getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
Press to select Nederland.
Press OK.The welcome screen appears.
Press OK when the signal quality is at 100%.
After some time, the Search channels
screen indicating the signal strength and
quality appears.
Using the numerical keys of the remote
control, enter the 3-digit activation code
found in chapter Additional Information.
The Search channels screen is a control-
screen where you can see the progress of
automatic tuning of the stations available in your
city.
Press OK.The UPC DigitalTV status
screen appears.
Check the bargraphs for adequate signal
strength and quality, and then press OK to
search for channels.The search progress is
reported on-screen by the bottom bargraph.
The screen complete is displayed.
Note
If an error screen appears during the activation
procedure, you can return in the previous
screens using the back key of your remote
control and start the procedure again. If after
multiple efforts, you still can’t get a picture,
please contact UPC Customer service.
When the search has been successfully
completed, the number ofTV and Music
channels found is displayed.
Check if the home town displayed is correct.
Getting started
70
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Using your Digital
Cable Receiver
Once you have connected the Digital Cable
Receiver, use the remote control to operate
the basic, frequently-used functions, such as
switching on and off and changing channels.
You will also become familiar with the handy
Programme Information Bar.This is used to
display information on the programme you are
watching, search for another programme, or
change channels.
Press the UPC key to accept the terms and
conditions.A short description of all the
features in the Digital Cable Receiver with
a UPC subscription will be displayed, and a
test will start to check that setup is done
correctly.
5.1
Switching the Digital Cable
Receiver on and off
• Press the UPC key on the remote control
to switch on the Digital Cable Receiver.
• Press to switch off the Digital Cable
Receiver.
Search failure
In case of channel search failure, before starting
a new search, check the following points:
Tip
• RF cable condition and connection to your You can also switch on the Digital Cable
Digital Cable Receiver as described in
chapter Connect
• Signal quality
Receiver by pressing the CH+/- keys, and set
it to standby by pressing the button on the
front of the Digital Cable Receiver.
• Correct activation code is entered
Note
5.2
Changing channels
If the same failure message appears after a while, There are various ways of using the remote
refer to chapter Frequently asked questions. control to quickly change channels.
If the problem remains, contact your dealer.
Zapping
Press CH+/- to quickly switch between adjacent
channels.
• Press CH+ once to change from channel 1
to channel 2.
• Press CH- once to change from channel 2
to channel 1.
Tip
You can also use the
,
,
and buttons on
the front panel of the Digital Cable Receiver to
quickly switch between adjacent channels.
71
Using your Digital Cable Receiver
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the channel number
You can use the numerical keys of the remote
control to go to a specific channel directly.
• Press 5 to switch to channel 5.
Refer to the chapter Preference
settings.
• The Programme Information Bar will not
automatically disappear when you press
OK to display it.
• To switch to a channel higher than 10,
press both digits in quick succession, for
example, 1 and then 5 to switch to channel 5.4
15.
Zapping with the Programme
Information Bar
Press OK to display the Programme Information
Bar.
5.3
The Programme Information Bar
Each time you change channels, a bar containing
programme information is displayed on your
television screen.
You can now see the channel and programme
you are watching as well as the next
programmes to be shown on this channel.
The Programme Information Bar displays the
following information:
You now have the following options:
• Press and to view programme
information about another channel.
• The information in the bar changes,
whilst the programme in the background
continues.
• the programme and channel you are
currently watching;
• the next programmes on the channel you
are currently watching;
• the suitability of the programme for
particular age groups (6+, 9+, 12+, 16+ and
18+; this information is not available for all
programmes);
• the elapsed time of the programme;
• whether the programme is available in
several languages;
• Press and to switch between the two
programmes displayed.Your active selection
is highlighted.A brief description of the
highlighted programme is given at the
bottom of the Programme Information Bar.
• Press the i key for a more detailed
description of the highlighted programme
(also see later in this chapter).
• Press OK to select the channel shown at
the top of the Programme Information Bar.
• Press the UPC key to hide the Programme
Information Bar without changing channels.
• whether subtitling in several languages is
available for the programme.
Notes
• After a while, the Programme Information
Bar will disappear from your screen.
• You can set how long the Programme
Information Bar should be displayed.
Using your Digital Cable Receiver
72
Download from Www.Somanuals.com. All Manuals Search And Download.
5.5
Additional programme
information
5.6
Favourite channels
When zapping, you can choose to zap only
through the channels included in your favourite
list. Favourite channels are indicated by a smiley
in the information bar.
Additional information can be displayed for
the programme highlighted in the Programme
Information Bar.
Press the i key to display the additional
Programme Information Bar.You will now
see a detailed summary of the highlighted
programme. Below this are the available
soundtrack language and subtitling settings.
Zapping with favourites
This function is indicated by the text All
channels in the Information Bar. Press
to
switch between zapping with favourites and
zapping all channels.
Note
Press and to select Soundtrack or
Subtitles.
Refer to chapter UPCTV Guide to set
favourites.
Press and to change the language.This
option is only available when the programme
is being broadcast in several languages and/
or with subtitles. By default, the soundtrack
and subtitle settings correspond to the
language configured in Preference settings
menu, providing this is available.
Tip
You can also set reminders on the Digital Cable
Receiver. More information about reminders can
be found in chapter UPCTV Guide.
Press the i key to close the screen.You will
return to the Programme Information Bar
or the programme you were previously
watching.
Press OK to change to the channel displayed
in the Programme Information Bar.
73
Using your Digital Cable Receiver
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Use more of your
Digital Cable Receiver
This chapter gives a complete description of the
functionalities of your Digital Cable Receiver.
6.1
Digital Cable Receiver full
overview
A
B C D E
F
G
H
I
Main unit
L
J
I
K
A
B
C
D
E
F
G
H
Main unit backside
Main unit
Main unit backside
A
- Switch to standby mode
A RF OUT* - Input to connect the cable from
your wall cable socket
B Status led
Green: the receiver is on
Red: standby mode
B ETHERNET2*
C USB*
Blinking: software update in progress
C Guide - For future use
D Back - Not active
E Led - Not active
F Led ꢀ - For future use
D L/R audio* - Left/Right analogue audio outputs
E TV scart* - Output to connect yourTV set
F Optical digital audio output*
G HDMI* - Output to connect yourTV set
HDMI input
G Navigation buttons - Move up/down, left/right
OK: confirm the selection
H Display panel
H Power** - Output to connect the mains cord
I AUX scart* - Output to connect your video
recorder or DVD player
J SPDIF* - Digital audio output
K RF IN*
I Smart card door
L ETHERNET1*
*
**
Safety extra low voltage
Hazardous voltage
Use more of your Digital Cable Receiver
74
Download from Www.Somanuals.com. All Manuals Search And Download.
A
UPC -Turn the Digital Cable Receiver
on. Back to the full screen display of the
channel you were previously watching
- Switch your Digital Cable Receiver to
standby mode
6.2
Remote control full overview
A
B
B
P
C
Alphanumeric keypad - Select a channel on
the Digital Cable Receiver, enter a PIN code
or select an option
C
D
E
Menu - Display the Main menu
On Demand - Display the UPC On Demand
menu
D
E
F
F
DVR - DigitalVideo Recorder
Interactive - Display the Interactive menu
Page down/page up - Scroll down/up one
page
Q
R
G
H
G
H
I
I
Arrow keys - Navigate through the menu
OK - Confirm the selection
J
CH +/- Next / previous channel
Back - Back to the previous channel or
previous section
K
L
i - Display / hide programme information
H
J
M ? help - Display help information on screen,
regarding the most frequently used keys on
your remote control
S
N
O
P
Coloured keys - Select coloured text on
screen
K
L
T
Keys to operate a video recorder or DVD
player/recorder
M
N
U
TV - Set the remote control to operate
your television
O
Q
R
S
Guide - Display the UPCTV Guide menu
Radio
VOL +/- Turn the sound level up / down
c - Mute or restore the sound
txt - Display / hide teletext
T
U
Note
First set up the remote control for use with
your television
75
Use more of your Digital Cable Receiver
Download from Www.Somanuals.com. All Manuals Search And Download.
6.3
Main menu full overview
Selecting an option from a list
Menus are used for the extra features offered by Most menus contain lists.The highlighted line in
UPC DigitalTV.
the list is the active selection.
• To select a different line, press and
• In cases where the line contains several
.
6.3.1 Displaying the Main menu
Press menu to display the Main menu:
• TV Guide: the user-friendly television
guide.
options (as is the case with the top bar in
the example screen), use and to set
the appropriate option.When you select a
different option, the yellow marking jumps.
• To confirm an active selection in a list or
menu summary, press OK.You will see
another screen or change to the selected
channel.
• On Demand: easy access to movies, etc.
• Settings: to set your preferences.
• Digital Radio: a wide range of digital
music channels.
• Interactive Services: for playing games.
• To select an option using coloured keys:
some text in the menus is preceded by a
coloured dot (
,
,
or ).To perform
the action described in the text, press the
key of the same colour on the remote
control.
• To go back to the previous screen, press
the back key.
• For more information, press the i key.
• To return to theTV programme, press the
UPC key.
Tips
• You are probably already familiar with
coloured keys from teletext, where
coloured texts are displayed at the bottom
of the screen so that you can quickly
access the relevant page.
6.3.2 Using the menus
Some basic actions will now be explained using
an example screen.
• Brief information is often provided at the
top of the menu screens to indicate which
keys ( , , and ) must be pressed to
select another option.
6.4
TV guide full overview
The UPCTV Guide gives you fast access to a
summary of the programmes you can watch
on the channels available from UPC DigitalTV.
You can display a channel list of all programmes
currently being broadcast. For each channel, you
can also request a summary of the programmes
to be broadcast later or over the next few days,
up to eight days in advance.
Use more of your Digital Cable Receiver
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the Programme Information to obtain
more information on the programmes in the
summaries.
Displaying the All channels screen
Select All channels in the UPCTV Guide.You
will see a summary of channels and programmes
currently being broadcast.
6.4.1 UPCTV Guide
Press guide to directly view the UPCTV
Guide or press menu, followed by TV Guide
in the Main menu, and then OK.You will now
see a menu containing channel categories.
The All channels screen provides you with the
following options:
• Scroll through the channels by pressing
and (also see the information on
the screen).The highlight moves up and
down accordingly.At the bottom of the
screen, you will see a brief description of
the programme being broadcast on the
highlighted channel.
6.4.2 All channels
The All channels screen of theTV Guide
provides a complete summary of the
programmes that can now be watched on the
UPC DigitalTV channels. Use the All channels
screen to select a programme of your choice,
block access to certain channels, set favourite
channels, order additional subscription, or check
which programmes are being broadcast now or
in the future on a specific channel.
• Press and to view the programmes
broadcast on the channel.Additional
programme information will appear on
your screen.
• Press
to view the programmes to be
shown on the channel during the rest of
the day and over the next few days.
• Press the i key for a detailed description of
the highlighted programme.
• Press
larger. Press
to zoom in.The text will become
again to zoom out.
• Press OK to select the channel.
77
Use more of your Digital Cable Receiver
Download from Www.Somanuals.com. All Manuals Search And Download.
On the selected channel
Press
to add the selected channel to your
• Press and to view other channels.
• Press and to select a programme.
favourites (providing the channel has not
already been set as a favourite).
• Press
to return to the summary of
channels and programmes.
Deleting favourites
• Press
• Press
to navigate to the previous day.
to navigate to the next day.
To delete favourites from your personal list:
Select the desired channel by pressing and
on your remote control.
Press
to delete the selected channel from
6.4.3 Settings
the list of favourites (providing the channel
has been set as a favourite).
Blocking channels
You can block certain channels as required, if
you do not want your children to watch them
for instance.
6.4.4 Adding channels
You can order channels for which you do not
have a subscription directly via the Digital Cable
Receiver:
Display the UPCTV Guide by pressing
guide.
Display the UPCTV Guide by pressing
guide.
Press
to display the Settings screen.
In this screen, select the channel to be
blocked, and then press .The channel can
now only be viewed by entering a PIN code.
The default PIN code is 0000.
Press
subscriptions.
to directly order your
Note
indicates that the channel is blocked.
Setting favourites
Display the UPCTV Guide by pressing
guide.
Press
to display the Settings screen.
To add favourites to your personal list, select
the desired channel by pressing and on
the remote control.
Press and to select the subscription of
your choice.
Use more of your Digital Cable Receiver
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Press OK to display additional information
on the selected subscription.
Setting a reminder using the Programme
Information Bar
Press OK once more to order the
subscription.
While the Programme Information Bar is
displayed:
Enter the PIN code to process the order.
Press to select the next programme.
Press OK to set the reminder.
Note
Channels you have ordered will not directly be
visible once the order has been placed.
It will take a maximum of 48 hours before you
can view this channel.
6.4.5 Setting reminders
There are different ways to set reminders: using
the UPCTV Guide or using the Programme
Information Bar.
Setting a reminder using the UPCTV
Guide
Display the UPCTV Guide by pressing
guide on the remote control.
Press OK to access to the channel
categories.
Summary of reminders
Display the UPCTV Guide by pressing
guide on the remote control.
Press
to view the programmes to be
Select MyTV Agenda and press OK.
shown on the channel during the rest of the
day and over the next few days.
This summary displays at a glance the reminders
you have set.
Navigate to the desired day and channel:
• Press and to view other channels
• Press
• Press
to navigate to the previous day.
to navigate to the next day.
You can also delete reminders in this screen:
Select the reminder with and
Press to delete the reminder.
.
Choose a programme by pressing and
.
Press OK to set a reminder on the selected
programme.
79
Use more of your Digital Cable Receiver
Download from Www.Somanuals.com. All Manuals Search And Download.
6.5
Settings full overview
Displaying the PIN settings menu
PIN settings can be changed using the PIN
In the Settings menu you can configure various settings option of the Settings menu.
preferences for using your UPC DigitalTV.
For example, you can set PIN codes to block
channels with an age rating and services, set
preferences for menu and subtitle language and
specify the type of television you have.
Display the Settings menu on your screen
(see chapter Displaying the Settings
menu). By default, the PIN settings bar is
highlighted.
Press OK.
Now enter your Customer PIN code.The
default Customer PIN code is 0000.The OK
button is highlighted.
6.5.1 Displaying the Settings menu
Press OK.The PIN settings menu now
appears on your screen.
The Parental control option is already
highlighted.
Press menu on the remote control.The
Main menu now appears on your screen.
Select Settings using , , and .The
Settings bar is highlighted.
Press OK.The Settings menu now appears
on your screen.
You now have the following options:
You can use your Parental PIN code to limit
access to programmes with an age restriction.
To access a programme above the set age
restriction, you will be prompted to enter your
Parental PIN code.
This feature enables you to prevent your
children from choosing a programme for which
they are too young:
6.5.2 PIN settings
A 4-digit PIN code can be set to block certain
channels and services against use by others (for
example your children).
PIN code protection can be set for:
• Restricting access to certain channels;
• Ordering films from UPC On Demand;
• Ordering games via your television;
• Programmes with an age restriction (6+,
9+, 12+, 16+ and 18+).This enables you to
stop your children watching programmes
for which they are too young.
Select Parental control from the PIN
settings menu, and then press OK.
The Programme Age Lock option is
highlighted.
Select a suitable age restriction (6+, 9+, 12+,
16+ and 18+) using and
.
Press OK.
Use more of your Digital Cable Receiver
80
Download from Www.Somanuals.com. All Manuals Search And Download.
You can also set the parental control for
purchases (UPC On Demand / Interactive
Services).
Note
Always choose different digit combinations for
the Customer PIN and extra PIN!
Select Parental control from the PIN
settings menu, and then press OK.
Select the Prompt for PIN when
purchasing ON/OFF option using .The
option is highlighted.
Changing the PIN code
The default PIN code is 0000. It can be changed
in the PIN settings menu
Use
,
,
and to select Customer
Select ON using and
.
PIN or Extra PIN depending on the code
you want to change.
Press OK.A screen for changing your PIN
code is now displayed.
Press OK.Your children will not be able to
make any purchases (unless you have given
them an extra PIN code).
Note
Programmes are only protected by a PIN code if
age restriction information is available for them.
Tips
Games in Interactive Services can be
protected with your Customer PIN code.
Customer PIN and extra PIN
You can set two PIN codes.The most important
PIN code is the Customer PIN code.You can
also give your children an extra PIN so that he
can order On Demand films up to a specified
age restriction or games via the television.
Enter a new PIN code.
Confirm your new PIN code by entering it
again.
Press OK to save the new PIN code.
Press OK to confirm or the back key to
cancel the change.
Protecting access to UPC On Demand
Adult films
You can use your Customer PIN code to
protect access to the channel summaries and
the UPC Adult Preview channel.This feature
enables you, for instance, to prevent your
children from viewing the previews and channel
summaries.
Both PIN codes are set to 0000 by default.
If you want to set PIN code protection, it is
important you change the default code of 0000
for the Customer PIN and extra PIN to four
digits of your choice.
Display the UPC On Demand menu with
the on demand key.
Highlight Erotiek using , and then press
OK.
Enter your PIN Code (The default
Customer PIN is 0000) and then press OK.
81
Use more of your Digital Cable Receiver
Download from Www.Somanuals.com. All Manuals Search And Download.
Press
of your remote control.
Enter your PIN Code again (The default
Customer PIN is 0000) and then press OK.
The Settings screen now appears.
Use and to select Yes for the Block
the Adult films section? option.Access to
the channel summaries and the UPC Adult
Preview channel is now protected by the
Customer PIN.
Press the UPC key to return to the
television screen.
Use more of your Digital Cable Receiver
82
Download from Www.Somanuals.com. All Manuals Search And Download.
List of PIN settings
The table below lists the most important PIN
settings.
Your requirement:
Settings required:
No protection
- Programme Age Lock OFF
- PIN code for purchases set to OFF
To protect all purchases (UPC On Demand,
Interactive Services) with a PIN code (also
from your children)
- PIN code for purchases set to ON
- Change Customer PIN and extra PIN
- Do not give your children the extra PIN code
You do not want your children to watch
programmes unsuitable for their age.
- Set age restriction (6+, 9+, 12+, 16+, 18+)
- Change Customer PIN and extra PIN
- PIN code for purchases set to ON
- Set programme blocking to the desired age
restriction (6+, 9+, 12+, 16+, 18+)
- Set Customer PIN and extra PIN
- Give your children the extra PIN
You want your children to be able to order
UPC On Demand films that fall below a
certain age limit and order games.
You want to prevent access to adult channels
and the UPC Adult Preview channel.
- PIN code for purchases set to ON
- Change Customer PIN and extra PIN
- Protect access to Adult films
with PIN code set toYES
Incorrect PIN code entered
If you enter an incorrect PIN code three times,
the PIN code will be blocked.You can try again
after 15 minutes.
83
Use more of your Digital Cable Receiver
Download from Www.Somanuals.com. All Manuals Search And Download.
6.5.3 Preference settings
the programme is broadcast providing the
soundtrack for your specified language is
available).
Preference settings is used to specify your
preferred settings, such as preferred languages
for menus or programmes broadcast in
several languages, or how long the Programme
Information Bar should remain visible when you
change channels.
• Press to select the Subtitle language
option, and then press and to set the
preferred subtitle language for programmes
broadcast with subtitles in several
languages.
Displaying the Preference settings menu
Display the Settings menu on your screen
(see chapter Displaying the Settings
menu).
Note
You can choose Off (the programme is
shown without subtitles) or from a large
number of languages (the programme is
shown with subtitles in your preferred
language providing these subtitles are
available).Your choice of language has no
affect on programmes from the Dutch
public and commercial broadcasting
companies (for example) as the option of
choosing a language is not available.
Select Preference settings using
and .The Preference settings bar is
highlighted.
Press OK.The Preference settings menu
now appears on your screen.
,
,
• Use to select the MiniTV Guide
display (sec.) option, and then press
and to specify how long the Programme
Information Bar remains on the screen
when changing channels (2, 4, or 8
seconds).
• Use to select the Memo countdown
period (min.) option, and then press
and to specify how many minutes prior
to the start of a programme the reminder
should appear (1, 2, or 5 minutes).
Choose your language preferences (only
possible if the channel is broadcast in several
languages) from the following options:
• Menu language is the active option. Press
and to change the language in which
the on-screen menus are displayed.
6.5.4 TV settings
• Press to select the Soundtrack
language option, and then press
and to set the preferred language for
UPC DigitalTV is suitable for conventional and
widescreen televisions.The type of television
programmes broadcast in several languages. only has to be set once.This enables you to
take optimum advantage of the possibilities of
Note
your television, regardless of whether it is a
conventional or widescreen model.
You can choose from Original (the
programme is shown in the language in
which it was recorded) or a large number
of other languages (a dubbed version of
Changing theTV settings
Display the Settings menu on your screen
(see Displaying the Settings menu).
Use more of your Digital Cable Receiver
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Select TV settings using
,
,
and
.
6.6
UPC services
The TV settings bar is highlighted.
Press OK.The TV settings screen now
appears.
6.6.1 UPC On Demand
Choose appropriateTV settings from the
following options:
UPC On Demand offers you access to UPC On
Demand films.
• TV format is the active option. Use
If you feel like watching a film, you can choose
from a wide selection at any time of the day.
Through the UPC On Demand-menu you
can watch films, documentaries, concerts and
TV-shows, among others. UPC On Demand
also offers you the possibility to rewind / fast
forward and pause all programmes as you were
watching a DVD.
Displaying the UPC On Demand menu
Press the on demand key on the remote
control or select On Demand in the Main
menu.The On Demand menu is now
displayed on your screen.The item Films
is highlighted by default. On the right of
your screen you can see UPC film previews
with passages from the UPC On Demand
selection.
and to choose according to your type
of television:Widescreen, Full-screen or
Letterbox.
• Select Picture quality using and
,
and then use and to choose between
High and Standard, depending on which
setting gives the best result on your
television.
• Select RGB picture alignment using
and . If necessary, use and to adjust
picture alignment.This value is set correctly
by default.
• Select Volume using and , and then
use and to increase or decrease the
volume of your television when switching
it on. Only use this setting if you think the
default volume is always too loud or too
quiet after switching on the Digital Cable
Receiver.
Press the UPC key to return to the
• Select HDTV audio synchronisation
using and , and then use and
to increase or decrease the audio
synchronisation.
programme you were watching.
85
Use more of your Digital Cable Receiver
Download from Www.Somanuals.com. All Manuals Search And Download.
You can now choose from the following
options:
• Films, for a selection of films.
• Kinderprogramma’s, for a list of all
programmes for children.
• TV-Series, for a list of allTV series you
can order immediately.
• Documentaires for the most fascinating
documentaries that are available at UPC
On Demand.
• Muziek, for a large selection of concerts
from different performers.
• Erotiek, for adult films.
• Paused items, for a list of all programmes
and films you have ordered in the last 24
hours.
Choose from the different films or film
categories using and , and then press
OK.An information screen is displayed.
Press OK again to start ordering the
selected film.
• Catch-upTV, provides access to different
programmes that were broadcasted on
television 1 to 10 days ago.
More Information
In the film list, you can find additional
information about a selected film, by pressing the
i key on the remote control.
Films
The Films item summarizes all the films
available.All the films can be ordered directly.
Under Nieuwe Films, there is an overview of
films that were in cinemas only a few months
ago.You can also immediately see a selection of
the latest films under Overige Films.
There is a short description of each film and
information about genre, playback time, director
and actors. By pressing this key again, you return
to the list with films.
Kinderprogramma’s
The Kinderprogramma’s item provides the
films for children between 0 and 6 years old or
between 6 and 12 years old.
Displaying Films
Press the on demand key on the remote
control or select On Demand in the Main
menu.The item Films is highlighted by
default.
Displaying Kinderprogramma’s.
Press the on demand key on the remote
control or select On Demand in the Main
menu.
Press OK.
Press and to select
Kinderprogramma’s.The
Kinderprogramma’s bar is now
highlighted.
Use more of your Digital Cable Receiver
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Muziek
In the Music item, there is an overview of
interviews and concerts of different performers,
categorized under All programmes, New
programmes, Concerts and Artists.
Displaying Muziek
Press the on demand key on the remote
control or select On Demand in the Main
menu.
Select Muziek using and
.
The Muziek bar is now highlighted.
Press OK.The Muziek screen now appears.
You see a list with music and programmes
you can order.
Press OK.The Kinderprogramma’s
screen is now displayed.You see a list of films
and programmes that can be ordered.
TV-Series
Erotiek
TheTV-Series item provides a list ofTV-shows, The Erotiek item summarizes all the adult films
divided under features All programmes, New and programmes.You can immediately order all
programmes, Drama and Comedy.
films and programmes in Erotiek. If you want an
overview of all titles, press OK.
Displaying TV-Series
Press the on demand key on the remote
control or select On Demand in the Main
menu.
Select TV-Series using and
.
The TV-Series bar is now highlighted.
Press OK.The TV-Series screen now
appears.You see a list with the films and
programmes you can order.
Documentaires
The Documentaires item provides access to a
collection of interesting documentaires divided
under All programmes, New programmes,
Nature, History or General.
Note
Access to Erotiek is protected by a PIN code.
The default PIN code is 0000. See Chapter
Settings for more information on setting PIN
code protection.
Displaying Documentaires
Press the on demand key on the remote
control or select On Demand in the Main
menu.
Select Documentaires using and
.
Displaying Erotiek.
The Documentaires bar is now highlighted.
Press OK.The Documentaires screen
now appears.You see a list with the
documentaires and programmes you can
order.
Press the on demand key on the remote
control or select On Demand in the Main
menu.
Select Erotiek using and
.
The Erotiek bar is now highlighted.
87
Use more of your Digital Cable Receiver
Download from Www.Somanuals.com. All Manuals Search And Download.
Press OK.The Erotiek screen is now
displayed.You see a list of films and
programmes that can be ordered.
Paused items
The Paused items bar provides an overview
of all programmes and films you have ordered
in the last 24 hours at UPC On Demand.You
are able to watch the film you ordered as many
times as you like within 24 hours.These films are
in this section.
Displaying Paused items
Press the on demand key on the remote
control or select On Demand in the Main
menu.
Within Catch-upTV, you can choose between
programmes of different broadcasting stations.
For example, you can watch public service
programmes in Catch-upTV Show.
Select Paused items using and
.
The Paused items bar is now highlighted.
Press OK.The Paused items screen now
appears.You see a list with the films and
programmes you can order.
Here, you can search for programmes in
different categories. For example, you can
search for programmes broadcast recently
on Nederland 1 or search for programmes in
different genres.
Catch-upTV
The Catch-upTV item provides access to
programmes that were broadcast on television
the last couple of days. Depending on your
subscription, you can watch yesterday’s and
today’s programmes or programmes of the last
10 days. For instance, UPC DigitalTV – Starter
provides access to today’s and yesterday’s
programmes and UPC DigitalTV - Royal,
Family andTotal provides access to all available
programmes within Catch-upTV.
Using the and keys, you can change between
the various channels.
Displaying Catch-upTV
Press the on demand key on the remote
control or select On Demand in the Main
menu.
Select Catch-upTV using and
.
The Catch-upTV bar is now highlighted.
Press OK.The Catch-upTV is now
displayed.You see a list with the films and
programmes you can order.
Ordering films
Ordering a film is simple.
Select the film of your choice in the list.
Press OK.A screen displays with additional
information about the selected film.
To order the film, press OK again.You are
now asked to confirm the purchase.
Use more of your Digital Cable Receiver
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
6.6.2 UPC Digital Radio
Note
On installation of the Digital Cable Receiver, all
UPC On Demand programmes are protected
by the default PIN code 0000. Enter this code to
order a film. See chapter Settings for additional UPC Digital Radio will be available soon.
information on PIN code security.
UPC Digital Radio gives you access to a wide
Confirm the purchase
There are two options when ordering a film:
selection of digital radio channels that you can
listen to on your television or through an audio
• If you have set a PIN code, you will need to system (as long as you have connected your
enter the PIN code first (the default PIN audio system to the Digital Cable Receiver).The
code is 0000).Then select OK using and menu allows quick access to a list of all the radio
press OK to confirm the order.
channels you can listen to.You can store your
favourite radio channels in a special list.
Viewing all radio channels:
Press Digital Radio to display the Main
menu.
Select Digital Radio using
,
,
and
.
The Digital Radio bar is now highlighted.
Press OK.The Digital Radio menu now
appears on your screen.
• If you have not set a PIN code, you will
be asked to confirm the purchase by
highlighting Yes and pressing OK.You
can stop the order by selecting Cancel
and pressing OK.After confirmation, the
text Film ordered will appear at the
bottom of your screen.The film you have
ordered starts immediately after you have
confirmed your purchase.
Select the All radio channels option.
Press OK.You now see a list of all radio
channels you can receive via the Digital
Cable Receiver.The All radio channels
option is directly selected (the bar is
highlighted).
Note
Your payments may not be processed.You will
then see notification of this error on your
screen. If this problem persists, please contact
the UPC Customer Service department at
0900-5008080 (€ 0.10 per minute) available
Monday to Friday 8AM to 9PM and Saturday
from 8AM to 6PM.
89
Use more of your Digital Cable Receiver
Download from Www.Somanuals.com. All Manuals Search And Download.
All radio channels
Favourites
In the All radio channels screen you can
select a radio channel of your choice, block
access to radio channels or compile a list of
favourites.
By compiling a list with favourite channels, you
always have the channels you like to listen to
at your fingertips.You can compile a list with
favourite channels on the All radio channels
screen (see All radio channels).
Compile a list with favourite channels
Select the channel you would like to add
to your favourite list from the All radio
channels screen, using and
Press to add the channel to your list of
.
favourites.
Access Favourites
You can display your list of favourite radio
channels from the Digital Radio menu (see also
Displaying Digital Radio chapter).
You can block radio channels in the Favourites
Select a channel using and .The bar with screen as well as delete favourites from the list.
the channel is now highlighted.
You now have the following options:
• Press OK to listen to the selected channel.
Information on the selected channel is
now displayed to the right of the channel
list.
Select Favourites in the Digital Radio menu.
You see the list of favourite channels you
have selected.
• Press
to block the selected channel.A
will appear to indicate that the channel
is blocked.The channel can only be listened
to once the PIN code has been entered.
The default PIN code is 0000. Chapter
Settings explains how to change the PIN
code.
• Press
to add the selected channel to
My Favourites.
Channels you add to My Favourites will
be placed in a separate list that can be
requested from the Digital Radio menu.To
go to Favourites straight from the current
Select a channel using and .The bar with
the channel is now highlighted.
screen, press
(see also Listening to
favourites further on).
• Press the back key to return to the Digital
Radio menu.
• Press the UPC key to return to the
television channel tuned before you
accessed the Digital Radio menu.
Use more of your Digital Cable Receiver
90
Download from Www.Somanuals.com. All Manuals Search And Download.
You now have the following options:
• Press OK to listen to the selected channel.
You can now read information about the
selected channel at the right side of the
channel list.
• Press
to block the selected channel.A
will appear to indicate that the channel
is blocked.The channel can only be listened
to once the PIN code has been entered.
The default PIN code is 0000. Chapter
Settings explains how to change the PIN
code.
• Press
from the list.
to delete the selected channel
Select the required service using
and
Press OK to confirm your choice.
,
,
• Press
to go to the All radio channels
.
screen and add a favourite channel.
Press the back key to return to the Digital
Radio menu.
News
• Press the UPC key to return to the
television channel tuned before you
accessed the Digital Radio menu.
The news section contains various articles on
domestic and foreign news, and on the economy
and culture.
Note
Weather
A screensaver will appear after a certain time
(5 minutes) to prevent the image of the tuner
screen from being burnt into the television
The weather section provides you with the
latest weather forecasts throughout Europe.
screen.The screensaver will disappear as soon as Traffic
you press a key on the remote control.
TheTraffic section provides you with the latest
rundown of all traffic jams and road works.
6.6.3 Interactive Services
Games
Interactive Services gives you access to
an interactive page on your television. In the
future, this page will display a broad range of
information.You can already find information
here on the news, weather and traffic and you
can also play games.
Follow the information on your screen to play
the game of your choice.
If you have to pay for the game, you will be asked
to confirm the purchase after a short period of
free playing time.
Confirm the purchase:
Displaying Interactive menu
Press interactive on your remote control.
A screen containing several options will be
displayed.
• If you have set a PIN code, you will need to
enter the PIN code first (the default PIN
code is 0000).Then select OK with and
press OK to confirm the order.
91
Use more of your Digital Cable Receiver
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Maintenance
7.1
Cleaning
For cleaning, use a soft, damp (not wet) cloth.
Never use any abrasive cloth and aerosol
cleaners.
7.2
Replacement
The Digital Cable Receiver does not contain any
user-serviceable parts. Do not attempt to open
it.All maintenance work must be carried out by
qualified service centres.
• If you have not set a PIN code, you will
be asked to confirm the purchase by
highlighting Yes and pressing OK.You
can stop the order by selecting No and
pressing OK.After confirmation, the text
7.3
Disposal
Game ordered will appear at the bottom Your product is designed and manufactured with
of your screen.The game you have ordered high quality materials and components, which
will appear on your screen.You can
continue playing as soon as the purchase is
confirmed.
can be recycled and reused.
Please inform yourself about the local separate
collection process for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.The correct disposal
of your old product will help prevent potential
negative consequences for the environment and
human health.
Note
A confirmed purchase can no longer be
cancelled.Your payments may not be processed.
You will then see notification of this error on
your screen. If this problem should be repeated,
please contact the UPC Customer Service
department at 0900-5008080 (€ 0.10 per
minute) available Monday to Friday 8AM to 9PM
and Saturday from 8AM to 6PM
Maintenance
92
Download from Www.Somanuals.com. All Manuals Search And Download.
numbers.The UPC key on the remote
control will light up twice after the fourth
number has been entered to indicate that
the code has been accepted. Perform the
above steps once more.
8
Accessories and
connections
8.1
Setting up the remote control
Press to check whether the device being
set up switches off. If this is not the case,
perform the above steps again.
If the device you have set up switches off
when you press , check whether the other
functions are working.
The remote control can be set up so that you
can operate all your devices with one remote
control. However, the remote control needs to
be set up once to operate your television and
video recorder or DVD player/recorder.A list
of the most common brands is given in chapter
Additional Information.
Automatically search for setup code
If your brand of television, video recorder or
DVD player/recorder is not in the list of setup
codes or the specified setup codes do not work,
proceed as follows.
Tip
A complete list of setup codes can be found on
teletext on the UPC Info Channel or at
Tip
Find the setup code for your device.There is A complete list of setup codes can be found on
a separate list of 4-digit setup codes for each teletext on the UPC Info Channel or at
type of device (TV, video recorder or DVD
player/recorder). Most brands have several
setup codes.Try the different setup codes in
succession. Start by setting up the remote
control for your television.
• Switch on the device for which you want to set
up the remote control.
• Press the TV key and then release it (use the
dvr key to search for the setup code for your
video recorder or DVD player/recorder).
Note
There may be more than one setup code in the
list for your type of television, video recorder or
DVD player/recorder. If this is the case, try the
• Press and hold OK and
Wait until the UPC key lights up twice on the
remote control and release the keys.
at the same time.
different setup codes in succession until you find •Then press 9, 9 and 1 in succession.The UPC
one that works. If your brand of television, video
recorder or DVD player/recorder is not listed,
use the information under Automatically
search for setup code hereafter.
key lights up twice on the remote control.
• Point the remote control at your television and
press
.
• Continue to point the remote control at
your television. Repeatedly press CH+ on the
remote control, until your television switches
off (every time you press CH+ the remote
control sends an “off” signal to your television
that corresponds to a specific setup code).
When the setup code corresponding to your
television has been found, your television will
switch off.When the setup code corresponding
to your video recorder or DVD player/
Press the TV key to set the remote control
toTV mode (to set up the video recorder or
DVD player/recorder use the dvr key).
Press and hold OK and
at the same time.
Wait until the light on your remote control
lights up twice before releasing the keys.
Enter the 4-digit setup code using the
numerical keys 1 to 9 on the remote
control.You have 20 seconds to enter the
recorder has been found, your video recorder
or DVD player/recorder will stop playing.
93
Accessories and connections
Download from Www.Somanuals.com. All Manuals Search And Download.
• Press the UPC key immediately after your
8.2
Connections
television switches off to store the setup code.
Scart connection
Note
CableWall
Socket
Digital Cable Receiver
You may have to press CH+ several times
before the correct setup code is found and your
television switches off. It may take around 15
minutes to find the code using the Search for
setup code function.When searching for the
setup code, make sure you keep the remote
control pointed at the television.
TV set
Replacing the batteries
The remote control is supplied with two new
alkaline batteries (type AAA/LR03). If the remote
control is not working, or no longer works
properly, you probably need to replace the
batteries:
Connect the supplied coaxial cable from the
cable wall socket to the RF IN socket at the
rear of the Digital Cable Receiver.
• Open the cover on the back of the remote
control.
• Insert two new batteries and close the cover
to the battery compartment
Connect a scart cable to the scart input of
theTV set and to theTV scart socket at the
rear of the Digital Cable Receiver.
Connect a coaxial cable to the RF input at
the rear of theTV set and to the RF OUT
socket at the rear of the Digital Cable
Receiver.
Please note:
Never mix old and new batteries or different
types of batteries (standard and alkaline).
Plug your Digital Cable Receiver to the
mains using the supplied power cord.
Tip
Warning
You can also switch the Digital Cable Receiver
on and to standby and change the channels
without the remote control.
The image quality will not be in High Definition
with the scart connection.
Switch on the Digital Cable Receiver by pressing
CH+ on the front of the media box.
Once the Digital Cable Receiver is switched on,
you can change channels by pressing CH+/- on
the front of the media box. Press to switch
the Digital Cable Receiver to standby.
Accessories and connections
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Recorder connection
Audio connection
CableWall
Socket
Digital Cable Receiver
TV set
Recorder
Connect the supplied coaxial cable from the
cable wall socket to the RF IN socket at the
rear of the Digital Cable Receiver.
Connect a scart cable to the AUX scart
socket at the rear of the Digital Cable
Receiver and to the scart input EXT1 of the
recorder.
Connect a scart cable to the scart input of
theTV set and to theTV scart socket at the
rear of the Digital Cable Receiver.
Connect the ANT IN socket at the rear of
your recorder to the RF OUT socket at
the rear of the Digital Cable Receiver using a
coaxial cable.
Option A – Optical digital connection
Your audio equipment is fitted with an optical
digital audio input:
Connect the ♫ OPT audio output of the Digital
Cable Receiver to the relevant audio input of
your audio equipment using an optical cable (not
supplied).
Consult the user manual of your audio
equipment to choose the proper digital audio
input.
Connect the ANT OUT socket at the rear
of your recorder to the RF input of yourTV
set using a coaxial cable.
Plug your Digital Cable Receiver to the
mains using the supplied power cord.
Option B – Electrical digital connection
Connect the SPDIF output of the Digital Cable
Receiver to the relevant input of your audio
equipment using a single CINCH cable (not
supplied).
Warning
Consult the user manual of your audio
equipment to choose the proper digital audio
To be able to record digital television, you must
make sure the Digital Cable Receiver is switched input.
on.
95
Accessories and connections
Download from Www.Somanuals.com. All Manuals Search And Download.
8.3
In-home cabling check
Plugs
The UPC cable network is modern and reliable.
The digitalTV signal runs through the radio/
TV socket in your house and the Digital Cable
Receiver to yourTV.
UPC DigitalTV is a quality product.Through our
experience we know that bad in-home cabling
and for example the use of unsuitable plugs
often leads to unnecessary failures.
For UPC DigitalTV demands suitable quality
material for an optimized picture- and sound
quality. It could be necessary for you to replace
wiring and/or plugs you currently have in
your home, as they possibly do not meet the
necessary requirements.
A proper plug is made of metal or a metallized
IEC-plug. Plugs with a plastic cap are always
sensitive to interference.
Splitters
(Coaxial) Cables
A splitter is used to distribute the signal to
multiple sets (for exampleTV sets).A suitable
splitter has a metal housing,
Coaxial Cables (“antenna cables”) transmit the
radio andTV signal, among others.
There are three kinds of splitters:
Take the following items into account:
- Only use coaxial cable type C12.You can have
the coaxial cables you currently use checked
for the right quality at your UPC Centre or a
specialized electronics shop.
-T-splitter.
-The push-on splitter that can be pressed onto
the radio/TV socket.
-The socket splitter that is placed in the meter
box, for example. It is usually equipped with so-
called F-connectors, recognizable by the thread.
Never place multiple splitters after each other.
- Never connect more than 15 meter coaxial
cable to the end of a splitter.
We advise you never to use more than 28 meter The more splitters, the stronger the signal loss.
coaxial cable on a distribution amplifier.Always You should use an amplifier when you have more
work with cables of one single piece.We advise than two sets.
against lengthening cables, as this often leads to
loss of signal and failures.
Do you already have UPC Broadband Internet
and/orTelephony?Then it is possible that a push-
on splitter or amplifier has already been placed
over the radio/TV socket.
In that case, check the type. Do you have a UPC
push-on splitter with type indication “CF-01/60
Cable modem optimizer”? Replace it with the
UPC push-on splitter of type “MCPO3”, which
can be purchased at the UPC Centres (see
chapter 10).
Accessories and connections
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Amplifiers
9
Guarantee and service
For the Philips warranty applicable to this
product, we refer you to the Philips website
It is possible that you are dividing the analogue
In the event you do not have an Internet
TV signal to a second and maybe even a thirdTV connection, please contact your local Philips
with your own splitter and/or amplifier.
Consumer Care Centre. Contact details are
given in the Contact information section of this
manual.
This connectivity method can have an adverse
effect on the picture-and sound quality of UPC
DigitalTV and the transmission of interactive
services. In that case, you need a UPC push-
on splitter of type “FDU44”, which can be
purchased at the UPC Centres.
For more advice on cabling in your home
and purchasing items, you can go to the UPC
Centres and the specialized electronics shops.
This ensures that you have good quality material.
In chapter 8 of this manual you can also read
instructions on cabling and the use of materials.
Pay attention!
On purchasing an amplifier, ensure that it
is bi-directional/ 2-way. For this is required
for using UPC DigitalTV and the interactive
services.
97
Guarantee and service
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Copy/content protection: HDCP on HDMI,
Macrovision on EXT1 / EXT 2
10 Technical data
This product is in conformity with European
95/47/EC and 2002/21/EC directives.
The product complies with the following
European council Directives: 2006/95/EEC and
89/336/EEC.
Audio Decoding
•
Compression format: Dolby Digital, Multi-
channel down-mixing, MPEG layer I/II,
MPEG4 HE-AAC, MPEG4 LC-AAC
•
Sound system: Dolby Digital, Stereo, Mono
Tuner/Reception/Transmission
Power
•
•
DVB: Cable
•
•
Power supply: 198-276V
Power consumption: 22W
Demodulation type: MPEG-4 DVB compliant,
MPEG-2 DVB compliant, QAM
Input frequency range: 51 - 858 MHz
Loop through frequency range: 47-862MHz
Symbol rate: 3 - 6.9
Noise figure: < 9.5 dB
Return loss: > 10 dB
Broadband Interface: Ethernet 100Mb/s,
Ethernet 10Mb/s
•
•
•
•
•
•
Dimensions
•
Product dimensions (WxHxD):
360 x 55 x 220 mm
Carton dimensions (WxDxH): 480 x 290 x
120mm
Weight: 1.87 kg
•
•
•
Weight incl. Packaging: 3 kg
Connectivity
Accessories
•
Cable antenna interface: RF in - IEC 169-2,
•
Included Accessories: HDMI cable, coaxial
RF out - IEC 169-2
cable, Mains cord, Remote Control, User
Manual, Quick start guide, Confirmation
card, UPC smart card.
•
•
•
•
•
Video Output - Digital: HDMI
TV scart out:Audio L/R, CVBS, RGB
VCR scart out:Audio L/R, CVBS
Audio Output - Analog:Audio L/R (cinch)
Audio Output - Digital: Coaxial (cinch),
Optical (TOSLINK)
•
Batteries: 2x AAA
Note
•
•
USB: USB 2.0
Network connections: RJ45
Mechanical design and specifications are subject
to change without prior notice
Video Decoding
•
Compression Format: MPEG-4 (HD),
MPEG-4 HP@I4, MPEG-4 HP@I3, MPEG-4
(SD), MPEG-2 MP@HL (high definition),
MPEG-2 MP@ML (std definition)
Conditional access system: Subscription
needed for pay-TV, Nagravision (card is
supplied)
•
•
De-scrambling: PayTV ready, Smart Card
reader
•
•
Resolution: up to 1920 x 1080 interlaced
Aspect Ratio: 16:9, 4:3 Letterbox, 4:3 Pan
Scan
Technical data
98
Download from Www.Somanuals.com. All Manuals Search And Download.
147 Geldermalsen
148 Geldrop
11 Additional information
149 Gemert-Bakel
151 Goedereede
153 Graafstroom
154 Groenlo-Lichtenvoorde
155 Groesbeek
List of activation codes
101 Abcoude
102 Achtkarspelen
103 Alkmaar
104 Almere
156 Haarlem
105 Amsterdam
107 Apeldoorn
108 Arnhem
157 Hardinxveld-Giessendam
158 Hattem
159 Heerde
109 Asten
160 Heerenveen
161 Heerjansdam
162 Heeze-Leende
163 Hellevoetsluis
164 Helmond
110 Barendrecht
111 Barneveld
112 Bergeijk
115 Berkel en Rodenrijs
141 Berkelland
116 Bernisse
166 Hilversum
168 Korendijk
117 Beuningen
118 Binnenmaas
119 Bladel
169 Krimpen aan den IJssel
170 Laarbeek
171 Landsmeer
120 Boarnsterhim
121 Boekel
123 Brielle
167 Bronckhorst
233 Bronckhorst
124 Brummen
125 Buren
172 Leerdam
173 Leeuwarden
174 Leeuwarderadeel
175 Lelystad
177 Lienden en Maurik
178 Liesveld
179 Lingewaal
126 Cranendonck
127 Cromstrijen
128 Deurne
180 Lingewaard
(Bemmel,Angeren)
181 Lingewaard (Gendt)
152 Lochem
130 Diemen
132 Dirksland
133 Doesburg
134 Doetinchem
135 Dordrecht
136 Dronten
137 Druten
138 Duiven
139 Ede
140 Eersel
142 Eindhoven
143 Elburg
184 Maasdriel
185 Menaldumadeel
186 Middelharnis
187 Mierlo
188 Millingen aan de Rijn
129 Montferland
190 Mook en Middelaar
191 Nederbetuwe (Dodewaard)
192 Nederbetuwe (Echteld)
194 Nederlek
195 Nederweert
197 Neerijnen
144 Epe
145 Ermelo
146 Ferwerderadeel
198 Nieuw-Lekkerland
199 Nigtevecht
99
Additional information
Download from Www.Somanuals.com. All Manuals Search And Download.
200 Nijkerk
251Wijchen
201 Nijmegen
202 Nuenen
203 Nunspeet
204 Oirschot
252Winterswijk
254 Zaanstad
255 Zaltbommel
256 Zederik
205 Oldebroek
206 Oostflakkee
207 Oostzaan
257 Zeewolde
259 Zevenaar
241 Zutphen
208 Oud-Beijerland
150 Oude IJsselstreek
209 Ouder-Amstel
210 Overbetuwe (Elst)
211 Overbetuwe
(Heteren,Valburg)
213 Papendrecht
214 Purmerend
215 Putten
261 Zwijndrecht
List of setup codes for the remote control
This chapter contains a list of setup codes for
setting up the remote control to operate your
television and video recorder or DVD player/
recorder.This list includes the most common
brands.A complete list of setup codes can be
found on teletext on the UPC Info Channel or
216 Renkum
217 Reusel-De Mierden
218 Rheden
Chapter Accessories and connections
describes the procedure for setting up the
remote control to operate your television and
video recorder or DVD player/recorder.
219 Ridderkerk
220 Rijnwaarden
221 Rotterdam
222 Rozenburg
223 Rozendaal
226 ‘s-Gravendeel
227 Sint-Oedenrode
228 Sliedrecht
TV setup codes
Aiko 0039, 0067, 0586, 0246, 0401, 0065, 0463,
0102, 0391, 0221, 0294, 0247
Aiwa 0735, 0731, 1946, 1938
229 Smallingerland
230 Someren
231 Son en Breugel
232 Spijkenisse
234 Strijen
Akai 0391, 0238, 0401, 1567, 0067, 0463, 0775,
0221, 0065, 0039, 0102, 0248, 0744, 0193, 0546,
0745, 0632, 0586, 0611, 0510, 0247, 0661, 0246,
0294, 0478, 0208, 0407, 0636, 1067, 1938, 0503,
0678, 0842
235Tiel
236Tytsjerksteradiel
237 Ubbergen
238Valkenswaard
239Veldhoven
240Vlaardingen
241Voorst
244Wageningen
241Warnsveld
246Weesp
248West Maas enWaal
249Westervoort
250Westvoorne
Alba 0039, 0448, 0400, 0265, 0401, 0698, 0067,
0586, 1067, 0385, 0248, 0246, 0277, 0193, 0517,
0611, 0066, 1698, 0609, 1938, 0744, 0473
Amstrad 0207, 0039, 0546, 0294, 0401, 0248,
0067, 0586, 0463, 0442, 0392, 1067, 0678, 0611
Anasonic 0400, 0067, 0586, 0039, 0698, 0404,
0193, 0322, 0132, 0441, 0289, 0277, 1467, 0042,
0458, 0134, 1698
Aristona 0586, 0067, 0042
Audiosonic 0039, 0067, 0404, 0586, 0139, 0744,
0745, 0247, 0400, 0367, 0294, 0248, 0516, 0458
Bang & Olufsen 0595, 0117, 0305
Beko 0516, 0065, 0458, 0744, 0400, 0448, 0067,
Additional information
100
Download from Www.Somanuals.com. All Manuals Search And Download.
1067, 0586, 0636, 0745
Bestar Daewoo 0404
Goldstar 0067, 0039, 0400, 0320, 0062, 0407,
0247, 0208, 0277, 0246, 0586, 0193, 0391, 0139,
0393, 0636, 0074, 0744, 0745
Goodmans 0664, 0404, 0067, 0529, 0586, 1067,
0698, 1939, 0066, 0294, 0102, 0546, 0039, 0320,
0517, 0401, 0265, 0065, 0510, 0590, 0062, 0247,
0365, 0248, 0481, 1938, 0609, 0660, 0691, 1930,
1698
Blaupunkt 0221, 0565, 0225, 0478, 0485, 0200,
0066
Bush 0698, 0248, 0193, 0039, 0066, 0067, 0401,
0265, 0312, 0385, 0393, 0404, 0294, 0391, 1067,
0517, 0238, 0247, 0644, 0647, 0728, 0611, 0586,
0744, 1930, 1938, 1698
Clatronic 0067, 0400, 0401, 0744, 0248, 0294,
0586, 0247, 0277, 0039, 0132, 0350, 0609, 0678,
0636
Granada 0067, 0586, 0256, 0386, 0042, 0075,
0102, 0138, 0238, 0247, 0066, 0369, 0546, 0503,
0365, 0590, 0193, 0393, 0578
Condor 0350, 0067, 0586, 0400, 0246, 0039,
0312, 0132, 0277, 0448, 0441, 0193
Grandin 0067, 0586, 0039, 0193, 0640, 0744,
0745, 0698, 0404, 0350, 0312, 0248, 0485, 0609,
Crown 0039, 0400, 0516, 0067, 0586, 0517, 0744, 1067, 1698, 0895
0636, 0745, 0451, 0448, 0609, 0238, 0369
Daewoo 0664, 0404, 1939, 0529, 0691, 0067,
0586, 0039, 0246, 0248, 0247, 0481, 1167, 1932,
1938, 0910
Grundig 0538, 0565, 0225, 0221, 0517, 0100,
0736, 0067, 0586, 0617, 0039, 0066, 0473, 0400,
1938, 0660
Hanseatic 0067, 0586, 0529, 0193, 0391, 0322,
Dansai 0067, 0586, 0294, 0062, 0065, 0246, 0039, 0574, 0312, 0424, 0350, 0664, 0458, 0400, 0691,
0066, 0247, 0238
Decca 0102, 0546, 0067, 0586, 0247, 1167, 0651,
1938
Dual 0574, 0247, 0067, 0586, 0289, 0382, 0424,
0193, 0561, 1167, 0661
0039, 0247, 0117, 0407, 0744, 0838
Hauppauge 0067, 0586
Hitachi 1255, 0066, 0386, 0074, 0138, 0503, 0193,
0608, 0226, 0247, 0062, 0224, 0546, 0102, 0511,
0529,
Elbe 0465, 0268, 0289, 0392, 0322, 0400, 0193,
0067, 0586, 0248, 0221, 0441, 0640, 0247, 0546,
0391, 0660
Emerson 0207, 0744, 0208, 0117, 0277, 0067,
0586, 0401, 0100, 0312, 0350, 0391, 1939, 0516,
0400, 0193, 0351
0067, 0586, 0139, 0393, 0578, 0749, 0664, 0774,
0208, 1167, 0135, 0522, 1511, 0391, 0542, 0510,
0827, 1075, 0659, 1067, 0914, 1606, 1179
Hitachi Fujian 0138
Hypson 0067, 0586, 0744, 0745, 0294, 0247,
0312, 0485, 0268, 1938, 0698, 1698
Hyundai 0067, 0895, 0586, 0736, 1182
Interfunk 0067, 0586, 0042, 0117, 0542, 0305,
Ferguson 0655, 0317, 0365, 0268, 0139, 0590,
0067, 0586, 0065, 0134, 0138, 0391, 0578
Fidelity 0193, 0542, 0393, 0067, 0586, 0401, 0442, 0193, 0391, 0400, 0139, 0277
0561, 0246, 0294, 0574, 1938, 0391
Intervision 0312, 0247, 0485, 0067, 0401, 0407,
Finlux 0135, 0134, 0067, 0586, 0744, 0376, 0247,
0102, 0193, 0546, 0745, 0100, 0117, 0132, 0441,
0661, 0522, 0510, 0659, 0503, 0448, 0636, 0651
Firstline 0067, 0586, 0404, 0698, 0744, 0193,
0039, 0351, 0246, 0277, 1939, 0132, 0247, 0441,
0574, 0561, 0268, 0102, 0265, 0238, 0391, 1067,
1698, 0838
0478, 0516, 0400, 0424, 0517, 0248, 0132, 0193,
0294, 0277, 0039, 0586
ITT Nokia 0391, 0578, 0193, 0503, 0510, 0376,
0238, 0369, 0636, 0640, 0661, 0393
JVC 0683, 0066, 0713, 0401, 0248, 0636, 0448,
0761, 0123
Karcher 0067, 0586, 0451, 0400, 0640, 0193,
0312, 0132, 0294, 0744, 0636
Kendo 0640, 0067, 0586, 0193, 0542, 0400, 0407,
Fisher 0134, 0247, 0066, 0238, 0400, 0585, 0075,
0117, 0187, 0391, 0193, 0574, 0102
Fujitsu 0236, 0102, 0132, 0247, 0193, 0039, 0382, 0393, 0458, 0441, 0132, 0265, 0277, 0392
0713, 0067, 0586, 0391, 0289, 0883
Kenwood 0135
Fujitsu General 0039, 0247, 0236, 0193
Kneissel 0067, 0400, 0640, 0441, 0404, 0529,
101
Additional information
Download from Www.Somanuals.com. All Manuals Search And Download.
0586, 0465, 0289, 0322, 0268, 0392, 1938
Lenco 0067, 0039, 0193, 0404, 0586, 0134
LG 0067, 0400, 0039, 0407, 0062, 0247, 0586,
0744, 0246, 0320, 0193, 0208, 0636, 0139, 0728,
0745, 0859, 1667, 1176, 1178
0744, 1167
Panasonic 0680, 1680, 0138, 0256, 0391, 0397,
0546, 0067, 0586, 0193, 0578, 1340, 0883
Philips 0586, 0067, 0268, 0042, 0221, 0117, 0453,
0404, 0802, 0039, 1786
Lifetec 0067, 0039, 0404, 0698, 0542, 0685, 1067, Pioneer 0196, 0041, 0067, 0200, 0586, 0453,
1167, 0586, 0248, 0294, 1698, 0713 0458, 0400, 0391, 0139, 0193, 0317, 0516, 0542,
Loewe 0542, 0663, 0067, 0586, 0685, 0400, 0117, 0790
0322, 0392, 0820, 0546
Pionier 0400, 0516
Luxor 0224, 1193, 0320, 0393, 0510, 0522, 0391,
0238, 0386, 0578, 0193, 0376, 0503, 1067, 0247,
0661
Proline 0067, 0586, 0655, 0664, 0660, 0441, 0042,
0351, 0102, 0651
Protech 0067, 0586, 0247, 0039, 0277, 0132,
Matsui 0067, 0586, 0517, 0039, 0265, 0207, 0041, 0294, 0448, 0367, 0698, 0312, 0193, 0516, 1067,
0385, 0102, 0066, 0247, 0401, 0463, 0473, 0393,
0609, 0485, 0193, 0546, 0065, 0238, 0075, 0225,
0221, 0365, 0744, 0574, 1938, 1067, 0659
1698
Quelle 0067, 1535, 0041, 0139, 0542, 0565, 0574,
0221, 0391, 0062, 0066, 0247, 0277, 0100, 0134,
Medion 0067, 0698, 0542, 0586, 1167, 0728, 0838, 0135, 0698, 0586, 0187, 0225, 0294, 0320, 0376,
1938, 1067, 1467, 1930, 1698, 0275
0451, 0039, 1698
Melectronic 0376, 0067, 0542, 0139, 0277, 0135,
0134, 0404, 0039, 0247, 0510, 0522, 0246, 0441,
0193, 0317, 0586, 0664, 0391, 0221, 0225, 0691
Metz 0225, 0565, 0477, 0221, 0397, 0418, 0776,
0067, 0117, 0586, 0305, 0617, 0698, 1067, 1698
Mitsibishi 0138, 0123, 0542, 0067, 0208, 0117,
0066, 0565, 0586, 0721, 0238, 1067
Radiotone 0039, 0067, 0586, 0458, 0400, 0609,
0448, 0442, 0678, 0698, 0294, 1067, 1698
Samsung 0648, 0617, 0067, 0208, 0586, 0039,
0123, 0247, 0478, 0512, 0400, 0294, 0246, 0320,
0674, 0090, 0062, 0102, 0238, 0712, 0193, 0655,
0842
Sanyo 0238, 0187, 0322, 0066, 0041, 0400, 0369,
0102, 0246, 0247, 0134, 0075, 0585, 0039, 0574,
0193, 0067, 0138, 0586, 0516
Multitech 0039, 0393, 0516, 0067, 0400, 0586,
0247, 0246, 0277, 0132, 0294
NEC 0200, 0617, 1200, 1300, 0066, 0350, 0485,
0039, 0404, 0247, 0067, 0586, 0041, 0734, 0275,
0529, 1734, 0801, 0691
Neckerman 0067, 0221, 0400, 1535, 0586, 0193,
0448, 0117, 0277, 0247, 0441, 0350, 0393, 0542
Neufunk 0067, 0039, 0586, 0640, 0248, 0312,
0744
Schneider 1167, 0067, 0586, 0042, 0574, 0424,
0382, 0289, 0247, 0277, 0401, 0391, 0248, 0698,
1067, 0193, 0678, 0744, 1939, 1938, 1698
SEG 0067, 0586, 1067, 1467, 0698, 0247, 0517,
0039, 0193, 0294, 0664, 0066, 0132, 0277, 0392,
0246, 0248, 1939, 1698, 1193
Seleco 0236, 0393, 0289, 0392, 0193, 0441, 0703,
Nikkai 0102, 0248, 0067, 0586, 0247, 0294, 0062, 0401, 0066, 0294, 0376, 0465
0065, 0367, 0246, 0039, 0066
Sharp 0123, 1223, 0187, 0066, 0521, 0683, 0286,
Nokia 0391, 0193, 0510, 0578, 0522, 0503, 0369,
0238, 0404, 0661, 0636, 0376, 0350, 0640, 0139
Orion 0067, 0385, 0586, 0685, 0744, 0265, 0473,
0207, 0350, 0041, 0039, 0351, 0132, 0294, 0442,
0546, 0561, 0574, 1946, 1938, 0910
0546, 0790, 0848
Siemens 0221, 0565, 0225, 0187, 0062, 0067,
0586, 0391
Sony 1535, 1681, 0041, 0066, 0132, 0383, 0067,
0586, 0187, 0864
OttoVersand 1535, 0066, 0123, 0542, 0067, 0586, Tandberg 0397, 0441, 0139, 0367, 0226, 0392,
0565, 0225, 0574, 0221, 0391, 0265, 0139, 0256,
0277, 0350, 0247, 0039, 0312, 0458, 0546
Palladium 0400, 0067, 0221, 1535, 0448, 0586,
0277, 0117, 0193, 0247, 0441, 0685, 0393, 0660,
0391, 0193
Teac 0728, 0542, 0067, 1467, 1067, 0586, 0698,
0485, 0247, 0736, 0294, 0574, 1939, 0208, 0039,
0442, 0312, 0448, 0785, 0200, 0744, 1698, 1754,
Additional information
102
Download from Www.Somanuals.com. All Manuals Search And Download.
1179, 1785
Dansai 0102, 0308
Telefunken 0655, 0590, 0139, 0617, 0728, 0528,
0317, 0365, 0226, 0067, 0586, 0516, 0744
Teletech 0067, 0586, 0698, 0039, 0277, 0367,
1067, 1698
Decca 0030, 0071, 0111, 0097, 0378, 0382
Dual 0071, 0111, 0308, 0030, 0378
Elbe 0308, 0068
Emerson 0102, 0075, 0030
Thomson 0655, 0590, 0317, 0139, 0365, 0226,
0067, 0586
Ferguson 0071, 0350, 0351, 0030, 0308
Fidelity 0030, 0102, 0270, 0462, 0382
Toshiba 0065, 0090, 0538, 0066, 0100, 0132, 1538, Finlux 0030, 0111, 0134, 0072
0247, 0139, 0748, 0225, 0221, 0648, 1946, 1938,
0039, 0728, 0067
Firstline 0102, 0378, 0073, 0067, 0075, 0072,
0308, 1167
Triumph 0207, 0546, 0376, 0586, 0067
Universum 0376, 0135, 0565, 0225, 0503, 0391,
0277, 0522, 0510, 0400, 0448, 0041, 0542, 0066,
0187, 0062, 0100, 0193, 0294, 0134, 0067, 0586,
0451, 0441, 0320, 1535, 0698, 0574, 0247, 0139,
0392, 0367, 0207, 0661, 0039, 1067, 1467, 0200,
1698
Vestel 0067, 0193, 0247, 0586, 0698, 1067, 1698,
1193
Waltham 0247, 0386, 0448, 0317, 0067, 0586,
0698, 0139, 1067, 1698
Fisher 0077, 0134, 0068, 0050
Fujitsu 0030
Fujitsu General 0067
Goldstar 0067, 0510, 0030
Goodmans 0030, 0102, 0270, 0308, 0067, 0050,
0111, 0378, 0667, 0382, 0672
Granada 0134, 0078, 0111, 0270, 0067, 0256,
0072, 0030
Grandin 0102, 0067, 0050, 0030, 0308
Grundig 0111, 0377, 0379, 0256, 0350, 0378,
0102, 0382, 0772, 0064
Yamaha 0680, 0827
Hanseatic 0067, 0308, 0111, 0068
Hitachi 0072, 0196, 0071, 0030, 0270, 0111, 0134,
0414, 0623
Video setup codes
Aiwa 0337, 0030, 0378, 0382, 0067, 0772, 0764,
0071, 1167, 0062
Akai 0067, 0136, 0345, 0672, 0071, 0050, 0382,
0270, 0378
Alba 0308, 0102, 0382, 0050, 0030, 0345, 0378,
0111
Amstrad 0030, 0308, 0102
Anasonic 0030
Hypson 0102, 0308, 0382, 0030, 0067, 0510
Interfunk 0111, 0134
Intervision 0030, 0308, 0067, 0378
ITT Nokia 0078, 0582
JVC 0071 0097, 0414, 0516
Karcher 0308
Kendo 0136, 0345, 0378, 0102, 0067, 0308
Kenwood 0071, 0068
Kneissel 0382, 0378, 0067, 0308
Lenco 0308
Aristona 0111, 0176
Audiosonic 0308
Bang & Olufsen 0529
LG 0067, 0510, 0030, 0308, 1167
Lifetec 0378
Beko 0134
Bestar 0308, 0050
Loewe 0111, 1592, 0256, 0067
Luxor 0136, 0073, 0102, 0134, 0077, 0078, 0345
Matsui 0378, 0067, 0270, 0382, 0030, 0772
Medion 0378, 0382
Melectronic 0030, 0067, 0068
Metz 1592, 0256, 0377, 0111, 0067, 0866, 0867
Mitsubishi 0073, 0097, 0111, 0510, 0030, 0672
Multitech 0067
Blaupunkt 1592, 0256, 0111, 0064
Bush 0102, 0308, 0345, 0382, 0030, 0378, 0111,
0672, 0772
Clatronic 0050, 0102, 0030
Condor 0050, 0308
Crown 0067, 0308, 0102, 0510, 0050
Daewoo 0308, 0672, 0667, 0874, 0378, 0382,
0075, 0050
NEC 0071, 0068, 0097, 0134, 0067, 0308, 1167
Neckerman 0071, 0111
Neufunk 0067
103
Additional information
Download from Www.Somanuals.com. All Manuals Search And Download.
Nikkai 0050, 0102, 0308
Bang & Olufsen 1055
Nokia 0134, 0136, 0345, 0071, 0308, 0270, 0078,
0072, 0111, 0582
Orion 0382, 0378, 0379, 0772
OttoVersand 0111
Palladium 0102, 0345, 0067, 0071, 0270, 0378,
0462
Panasonic 1592, 0256, 0866, 0867
Philips 0111, 0176, 1311, 0414, 0623, 1299
Pioneer 0097, 0111, 0072, 1833
Proline 0030, 0308, 0350, 0672, 0351
Protech 0111, 0308
Blaupunkt 0747
Bush 0743, 0725, 0863, 1725, 0760, 0861, 0729,
0720, 0719, 0747, 0546, 0848, 0909, 0914, 0753
Clatronic 0818, 0809, 0848, 0702
Crown 0800, 0681, 0720
Daewoo 0735, 0862, 0863, 0800, 0744, 1948,
0900, 0902, 1171, 1199
Dansai 0800, 0777, 0813, 1145
Decca 0800
Dual 0695, 0681, 0743, 0760, 0861, 0813, 0809,
0820
Quelle 0111
Emerson 0621, 0735
Samsung 0270, 0462, 0650
Ferguson 0681
Sanyo 0134, 0077, 0078, 0097
Schneider 0102, 0030, 0067, 0111, 0308, 0270,
0176, 0072, 0382, 0672
Finlux 0771, 0800, 0813, 0621, 0702, 0781, 1177
Firstline 0829, 0899, 0681
Fisher 1949
SEG 0102, 0270, 0308, 0672, 0111, 0667
Seleco 0071, 0414, 0050, 0067
Sharp 0078, 0067, 0599
Siemens 0067, 0134, 0111, 0176, 0350, 0377
Sony 0064, 0062, 0136, 1062
Tandberg 0308
Teac 0102, 0071, 0030, 0308, 0672, 0067, 0111,
0337, 0623, 0667, 0874
Telefunken 0672, 0071, 0350, 0351, 0414, 0524,
0308
Goldstar 0621, 0771
Goodmans 0681, 1034, 0820, 0720, 0813, 0753,
0848, 0909, 0863, 2037, 0743, 0760, 1251
Grandin 0746, 1284, 0702
Grundig 0725, 0805, 0569, 0681, 0735, 0820,
0743, 0700, 0753, 1725, 2076, 1034, 1760, 1950
Hanseatic 0771, 0813, 1183
Hitachi 0694, 0695, 0603, 0809, 1950, 0887, 2024,
0743
Hyundai 0813, 1048, 0880, 0796, 1258, 2076
JVC 0653, 0588, 1931, 1970, 1194, 0569, 0533,
0897
Teletech 0102, 0308, 0030
Thomson 0350, 0752, 0351, 0071, 0097, 0414,
0524, 0308
Karcher 0813
Toshiba 0075, 0071, 0414, 0073, 0111, 0772, 0382, Kendo 0729, 0743, 0861
1038
Kenwood 0564, 0520, 0767
Lenco 0729, 0681, 0800, 0848, 0743, 1059, 0861
LG 0621, 0771, 1936, 0899, 2013, 2032
Lifetec 0681, 0861
Universum 0030, 0111, 0270, 0067, 0136, 0378,
0134
Yamaha 0071
Loewe 0569, 0771
Luxor 1034, 0743, 1760, 0760, 1275
Matsui 0681, 0743, 0702, 0725, 0914, 1760
Medion 0861, 0813, 0681, 0746, 0909, 0660, 2042,
2037
Metz 0601, 0555, 0743
Mitsubishi 0743
DVD player/recorder setup codes
Aiwa 0671, 0725, 1942, 0899, 1166, 0563
Akai 0820, 0809, 0818, 0796, 0720, 0746, 0914,
0743, 0882, 0735, 1113, 1145, 1229, 1725, 1166
Alba 0747, 0729, 0743, 0753, 0763, 0725, 0760,
0813, 0569, 0702, 1170, 1081
NEC 0899, 0722, 0621, 1948
Neufunk 0695
Amstrad 0743
Anasonic 0861
Nikkai 1953
Audiosonic 0720, 1953
Palladium 0725, 0809
Panasonic 0520, 1938, 1935, 1040, 1041
Additional information
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Philips 0569, 0676, 0915, 0533, 1941, 0705, 1842,
1188
Pioneer 0601, 1995, 0661, 0555, 1841
Proline 0681, 0702, 0820, 1034, 0863, 1945
Samsung 0603, 0774, 1962, 1958, 0850, 1105,
0520
Sanyo 0700, 0725, 0820, 1949, 0903
Schneider 0813, 0861, 0809, 0735, 0818, 0743,
0681, 0820, 1183, 1131
SEG 0695, 0743, 0798, 0914, 0902, 0793
Sharp 0660, 0782, 0725
Sony 0563, 1663, 1563, 2011, 1100, 1933, 0802,
1964, 1163, 1063, 0603, 1099
Tandberg 0743
Teac 0747, 0771, 0546, 0601, 0722, 0798, 0621,
0820, 1227, 1960, 1965, 0863
Telefunken 0820, 1113, 0819, 0818
Teletech 0743
Thomson 0581, 0552
Toshiba 0533, 1075, 2018, 2036
Universum 0771, 0743, 0621, 0809, 1948, 1943,
1257, 0820
Vestel 0743, 2024
Yamaha 0569, 0676, 0520
105
Additional information
Download from Www.Somanuals.com. All Manuals Search And Download.
other on screen. If one of the tests comes back
with an error as result, we recommend that you
check the connections of all plugs and cables
and execute the test on channel 999 again. If
the test still comes back with an error, please
contact the UPC Customer Service department
at 0900-5008080 (€ 0.10 per minute) available
Monday to Friday 8AM to 9PM and Saturday
from 8AM to 6PM
12 Frequently asked
questions
If you encounter any problem concerning
the service, please contact the UPC
Customer Service department at
0900-5008080 (€ 0.10 per minute)
available Monday to Friday 8AM to 9PM
and Saturday from 8AM to 6PM
2. The following message appears:“de
installatie wordt nu voltooid. Dit kan 15
minuten duren ...”.What now?
1. Testing the complete installation
If the quality of the signal is poor, do a test by
going to channel 999.
This screen indicates that the installation will
now be completed.Wait at least 15 minutes.
If the Digital Cable Receiver still displays the
same message after 15 minutes, please contact
the UPC Customer Service department at
0900-5008080 (€ 0.10 per minute) available
Monday to Friday 8AM to 9PM and Saturday
from 8AM to 6PM to ask for the status of your
subscription.
Step 1
Press the UPC key on the remote control and
then press 9 9 9.
3. I want to select a channel listed in the
UPCTV Guide channel summary but see
the message “Zender niet toegankelijk”.
The channel summary of the UPCTV Guide
displays all the channels available from UPC
DigitalTV, even those you are not subscribed
to.You can only select channels to which you
have subscribed.To watch a channel you must
subscribe to it. If you would like to subscribe
to additional channels, you can purchase a
The test channel is now displayed.A message
appears after a few seconds, telling you to press
on your remote control.
Step 2
Press
on the remote control to automatically subscription directly using the remote control.
execute five tests.
Go to the UPCTV Guide and press
on your
remote control. Select the subscription you
would like to purchase and follow the steps on
the screen. Please contact the UPC Customer
Service department at 0900-5008080 (€ 0.10
per minute) available Monday to Friday 8AM to
9PM and Saturday from 8AM to 6PM
4. I want to select a channel to which I’ve
subscribed, but the television picture stays
black.
The results of those tests appear under each
Frequently asked questions
Unfortunately, fault situations can arise (for
a number of different reasons) which can
106
Download from Www.Somanuals.com. All Manuals Search And Download.
adversely affect the reception of channels. Please If you encounter any problem concerning
contact the UPC Customer Service department
at 0900-5008080 (€ 0.10 per minute) available
Monday to Friday 8AM to 9PM and Saturday
from 8AM to 6PM
the product, please contact the Philips
Consumer Care Centre at 0900 84 07
(€ 0.10 per minute).
8. Can I use UPC DigitalTV as soon as
the Digital Cable Receiver is installed?
You can watch television and enjoy the benefits
of UPC DigitalTV once the Digital Cable
5. Have you lost or forgotten your PIN
code?
The default PIN code is “0000” but you have
the option of changing it. It is possible to lose
or forget your PIN code after it has been
changed.To reset your PIN code please contact
Call the UPC Customer Service department
at 0900-5008080 (€ 0.10 per minute) available
Monday to Friday 8AM to 9PM and Saturday
from 8AM to 6PM
Receiver has been installed and the subscription
of UPC HDTV has been activated.You will
experience enhanced (digital) picture and sound
quality, and have access to a wider selection of
television and radio channels.You can order films
and have instant access to the UPCTV Guide,
an electronic programme guide, at all times.
The Digital Cable Receiver supports specialTV
settings, such as parental locking for programmes
which should not be watched by your children.
6. I can no longer order any films via the
Digital Cable Receiver.
Your Digital Cable Receiver may not be
connected properly to the wall socket. If you
have directly connected the device to the wall
socket, there may be other causes. If you want
to be certain of the cause you can perform a
diagnosis. Go to channel 999, wait for a few
seconds and then press . Five different tests
will be carried out. If one of the five tests
9. How does the remote control work?
The remote control supplied has been specially
designed to take optimum advantage of the
possibilities offered by UPC DigitalTV. It can
also be used to operate your television, video
recorder or DVD player/recorder. More
information on using the remote control and a
should result in ERROR, please contact the UPC detailed explanation of the keys can be found in
Customer Service department at 0900-5008080 the Remote control full overview chapter.
(€ 0.10 per minute) available Monday to Friday
8AM to 9PM and Saturday from 8AM to 6PM
10. Can I also use the remote control for
my television and other devices?
7. I have completed the installation
procedure and noticed that “150”
channels were found, but am unable to
view them all.What should I do?
The number of channels you can view depends
on your subscription.
The remote control can be used to operate
yourTV and DVD player/recorder or video
recorder.The remote control is set up by default
to operate the Digital Cable Receiver.To use the
remote control with yourTV and DVD player/
recorder or video recorder, the remote control
must first be set up for these devices.After the
Some channels require an additional
subscription. If you are interested, please contact remote control has been set up for use with
the UPC Customer Service department at
0900-5008080 (€ 0.10 per minute) available
Monday to Friday 8AM to 9PM and Saturday
from 8AM to 6PM.
yourTV, it can be used to increase or decrease
the volume of digitalTV and radio programmes.
If you do not set up the remote control, you will
only be able to increase or decrease the volume
with the remote control for your television.The
user manual describes how to set up the remote
control for use with other devices.
107
Frequently asked questions
Download from Www.Somanuals.com. All Manuals Search And Download.
11. My remote control no longer works.
supplied cables or other cables compliant with
If the remote control no longer works properly, the C12 standard are used (C12 is short for
this probably means the batteries need replacing. Coax12 - this cable meets the attenuation
In order to function correctly, the remote
control requires direct contact with the Digital
Cable Receiver, without any obstacles between
them. If it still doesn’t work, contact the Philips
Consumer Care Centre at 0900 84 07 (€ 0.10
per minute).
(loss) and irradiation requirements). If you
are using your own distributors or amplifiers,
disconnect them first and connect the Digital
Cable Receiver directly to the wall socket. Use
the RF Out output on the Digital Cable Receiver
if you want to feed the analog television signal
to several televisions in your home. If the
12. The UPC DigitalTV sound is quieter
than the sound of the analog channels
picture remains pixelated after the cables have
been checked or the “Signaal verlies: Er schijnt
from the standard Radio/TV package. How geen signaal te zijn” does not disappear, please
can I increase the volume?
contact the Philips Consumer Care Centre at
0900 84 07 (€ 0.10 per minute).
You can increase or decrease the volume of
UPC DigitalTV by selecting the TV settings
option from the Settings menu.
15. The Digital Cable Receiver has crashed
and I cannot do anything anymore.
Unfortunately, the Digital Cable Receiver
sometimes crashes and can no longer be
operated by the remote control or the
13. The volume keys on the remote
control do not work. I cannot change the
volume for any programmes.What must
I do?
buttons on the front panel of the Digital Cable
Receiver. One possible reason for the Digital
To increase or decrease the volume for UPC
DigitalTV programmes with the remote control, Cable Receiver crashing is that the device is
the remote control must first be set up for use
currently receiving new information. In this
with your television. If you do not set up the
case, the message Software Download in
remote control, you will only be able to increase Progress will appear on screen.The message
or decrease the volume with the remote will disappear from your screen as soon as the
control for your television.The Setting up the Digital Cable Receiver has finished receiving the
remote control chapter describes how to
set up the remote control for use with other
devices.
information.You can now resume using the UPC
DigitalTV services. If the Digital Cable Receiver
does not respond and/or the Software
Download in Progress message does not
appear, it may help to briefly disconnect the
mains power to the Digital Cable Receiver.
If the Digital Cable Receiver still does not work
after this, please contact the Philips Consumer
Care Centre at 0900 84 07 (€ 0.10 per minute).
14. The television picture is pixelated or
the “Signaalverlies” screen appears.
Symptoms of interference or signal loss on the
cable network (which can be due to a number
of reasons) include pixelation (visible blocks) of
the picture from the Digital Cable Receiver.The
signal received by the Digital Cable Receiver is
16. I have connected the Digital Cable
too weak. If the pixelated effect continues or the Receiver and a screen now prompts me to
message “Signaal verlies: Er schijnt geen signaal
enter a location code.What should I do?
te zijn” appears, it is important that you first
You must enter the location code for the town/
check the coaxial cable between the wall socket city in which you live.
and the Digital Cable Receiver. It is imperative
for the quality of the digitalTV signal that the
The location code can be found in the
Additional information chapter.
Frequently asked questions
108
Download from Www.Somanuals.com. All Manuals Search And Download.
17. The following message appears:
“‘signaal verlies, er schijnt geen signaal te
zijn...”.What should I do?
This message indicates that the signal received
by your Digital Cable Receiver is too weak or
there is no signal.
21. The device seems slow when I’m
zapping.
Changing channels with digital television takes
approximately half a second longer than with
analog television and switching between HD and
SD channels might also take longer.
Check that your Digital Cable Receiver is
directly connected to the wall socket - without
any intermediate non-UPC devices, distributors
or amplifiers. If the problem cannot be resolved,
please contact the Philips Consumer Care
Centre at 0900 84 07 (€ 0.10 per minute).
22. Should I leave the Digital Cable
Receiver in standby mode when I’m not
watching television?
The Digital Cable Receiver regularly receives
software updates via the cable network. New
services (such as new games) are also received
via these “software downloads”. In order to
receive the new software (and new services),
it is important that you leave the Digital Cable
Receiver in standby mode if you are not using it.
18. I have completed the installation
procedure, however the picture is very
poor.What must I do?
There can be several reasons for poor picture
quality - how would you describe the visible
symptoms of the fault?
23. What do I have to check when
connecting the Digital Cable Receiver?
It is important that you directly connect your
19. WrongTV format
The wrong picture format may also be set in the Digital Cable Receiver to the wall socket,
TV settings option of the Settings menu.
without any intermediate non-UPC devices,
distributors or amplifiers.There must also
be sufficient space around the Digital Cable
Receiver to ensure proper ventilation.
20. Stripes, interference, black & white,
specks, blurry or discoloured picture:
These faults are caused by the cable between
the Digital Cable Receiver and your television
or other external devices. Check whether these
cables are faulty or the connectors are loose
and replace the cables.
24. I have several televisions at home. Can
I watch UPC DigitalTV on all of them?
This is not possible, unfortunately.The “digital”
signal can only be used with one television.
By connecting a distributor to the aerial (RF)
output, your “normal” analogTV signal can be
distributed to the other televisions in your
home.
Black, frozen, pixelated picture:
This fault is caused by a problem in the signal
received by the device. Possible causes include
poor or loose cables or malfunctions in our
network. Check that the Digital Cable Receiver
is directly connected to the wall socket -
without any intermediate non-UPC devices,
distributors or amplifiers. If the problem cannot
25. I have just connected the Digital Cable
Receiver but don’t see a picture.What
should I do?
be resolved, please contact the Philips Consumer Check whether the Digital Cable Receiver is
Care Centre at 0900 84 07 (€ 0.10 per minute).
connected to the 230V mains voltage.Also check
whether the Digital Cable Receiver has been
correctly connected to the television and that
the right channel has been selected.
109
Frequently asked questions
Download from Www.Somanuals.com. All Manuals Search And Download.
26. How do I connect the Digital Cable
Receiver?
Instructions can be found in the Connect
chapter. If you are purchasing several UPC
products, you can find the instructions in the
installation manual Connecting all UPC
services. If you are unable or do not wish to
carry out the installation yourself, an installer
can perform the installation for you. Please
contact the Philips Consumer Care Centre at
0900 84 07 (€ 0.10 per minute).
Frequently asked questions
110
Download from Www.Somanuals.com. All Manuals Search And Download.
13 Glossary of terms
HDMI
HDMI is a standard for video interfacing; it can
convey a massive amount of digital data. It means
it can easily support all HDTV standards.
Analogue audio
Sound that has not been turned into numbers.
Analogue sound is available from the LEFT/
RIGHT AUDIO outputs.The red and white
sockets send audio through two channels, the
left and right.
HDTV
High-DefinitionTelevision.
Interactive
Aspect ratio
Gives you access to an interactive page offering
various information and services.
Aspect ratio refers to the length to height ratio
ofTV screens.The ratio of a standardTV is 4:3,
while the ratio of a high-definition or wideTV is
16:9.The letterbox format allows you to enjoy a
picture with a wider perspective on a standard
4:3 screen.
JPEG-EXIF
JPEG-Exchangeable Image File.A file format
developed by Fuji Photo Film for digital
still cameras. Digital cameras from various
manufacturers use this compressed file format,
which carries date, time and thumbnails
information, as well as picture data.
Delay
The time difference between a sonic event and
its perception at the listening position. Use the
Lip Synchronization feature to cancel the delay.
JPEG
A very common digital still picture format.A
still-picture data compression system proposed
by the Joint Photographic Expert Group, which
features small decrease in image quality in
spite of its high compression ratio. Files are
recognized by their file extension “JPG” or
“JPEG”.
De-scrambling/scrambled
ManyTV channels are scrambled.To de-scramble
them you need specific smart cards provided by
different pay-TV providers.
Digital audio
Sound signal that has been converted into
numerical values. Digital sound is available
when you use the DIGITAL AUDIO OUT
COAXIAL.These sockets send audio through
multiple channels, instead of just two channels as
analogue does.
Lip Synchronization
Setting used to synchronize sound and pictures
in case a delay is experienced, in particular if the
sound of speech does not match lip movements.
Dolby Digital
A surround sound system developed by Dolby
Laboratories containing up to six channels of
digital audio (front left and right, surround left
and right, centre and subwoofer).
MPEG
Motion Picture Experts Group.A collection of
compression systems for digital audio and video.
DVB
DigitalVideo Broadcasting.
111
Glossary of terms
Download from Www.Somanuals.com. All Manuals Search And Download.
PIN Code: 4-digit code used to prevent access
to inappropriate programmes (parental control).
scart Loop-through
Function allowing automatic signal by-pass for
playback from aVCR or DVD player/recorder
connected to scart EXT2.
SDTV
Standard DefinitionTelevision.
Smart card
Card to be inserted into the smart card slot. It
is provided by the pay-TV provider whom you
took out a subscription.
Surround
A system for creating three dimension sound
fields full of realism by arranging multiple
speakers around the listener.
UPC On Demand
Gives you on-demand access to films from UPC
On Demand.
Glossary of terms
112
Download from Www.Somanuals.com. All Manuals Search And Download.
14 Index
Connect
basic connection, 10
Favourite lists
Add channels to a favourite list, 19
Remove channels from a favourite list, 19
Install
First installation, 10
Search failure, 12
Programme Information Bar, 13
Remote control
Prepare the remote control, 9
Setting up the remote control, 34
Use the remote control, 16
Select a channel, 13
Smart card
Check the smart card, 10
113
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
UPC Centre Arnhem
Koningstraat 73
Contact information
Monday 13:00 - 18:00
Tuesday to Friday 9:30 - 18:00
New:Thursday open to 21:00
Saturday 9:30 - 17:00
Closed on Sunday
UPC Centre Nijmegen
Takenhofplein 1
Monday 10:00 - 17:30
DCR 5012
Serial number:
Tuesday to Friday 9:00 - 17:30
Closed on Saturdays and Sundays
PHILIPS Nederland /The Netherlands
Philips Consumentenlijn
Postbus 102
UPC Centre Haarlem
Grote Houtstraat 133
Monday 13:00 - 18:00
5600 AC Eindhoven
Tel: 0900 8407 (€ 0,10/min)
Tuesday to Friday 9:30 - 18:00
New:Thursday open to 21:00
Saturday 9:30 - 17:00
UPC Centre Almere Stad
Traverse 5 (opposite the Utopolis movie
theater)
Closed on Sunday
UPC Centre Leeuwarden
Ruiterskwartier 127 (on Zaailand Square)
Monday 13:00 - 18:00
Tuesday to Friday 9:30 - 18:00
New:Thursday open to 21:00
Saturday 9:30 - 17:00
Monday 13:00 - 18:00
Tuesday to Friday 9:30 - 18:00
New:Thursday open to 21:00
Saturday 9:30 - 17:00
Every last Sunday of the month between 12:00
and 17:00
Closed on Sunday
UPC Centre Amsterdam
Kabelweg 51
UPC Centre Rotterdam
Lijnbaan 117
Monday 10:00 - 17:30
Tuesday to Friday 9:00 - 17:30
Closed on Saturdays and Sundays
Monday 12:00 - 18:00
Tuesday toThursday 9:30 - 18:00
Friday 9:30 - 21:00
Saturday 9:30 - 18:00
Sunday 12:00 - 17:00
UPC Centre Amsterdam
Ceintuurbaan 117
Monday 10:00 - 17:30
UPC Centre Rotterdam
Zuidplein Hoog 441
Monday 12:00 - 18:00
Tuesday toThursday 9:30 - 18:00
Friday 9:30 - 21:00
Tuesday to Friday 9:30 - 17:30
New:Thursday open to 21:00
Saturday 9:30 - 17:00
Closed on Sunday
Saturday 9:30 - 17:00
Sunday - only when shops are open
Contact information
114
Download from Www.Somanuals.com. All Manuals Search And Download.
UPC Customer Service
If you have any questions after reading this
manual or if you come across any unexpected
situations during or after installation of the
device, please contact the UPC Customer
Service department at 0900 15 80 for technical
support (€ 0.10 per minute), available seven days
a week from 08:00 to 21:00.
Trademarks and partner logos
Trademarks are the property of Koninklijke
Philips Electronics N.V. or their respective
owners.
Websites
For more information about Philips products,
Visit our website for more information on the
possibilities offered by UPC DigitalTV, as well
as by UPC Broadband Internet, UPCTelephony
and UPC Mobile. For more information and
questions about UPC DigitalTV, visit:
Manufactured under license from Dolby
Laboratories.
“Dolby”,“Pro Logic”, and the double-D
symbol are trademarks of Dolby Laboratories.
HDMI, and HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
Trademark of the DVB DigitalVideo
Broadcasting Project (1991 to 1996).
The “HD ready” Logo is a trademark of
EICTA.
100% recycled paper
100% papier recyclé
115
Trademarks and partner logos
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2008 Koninklijke Philips Electronics N.V.
All rights reserved.
Document order number: 3111 176 54541
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Paxar Printer 6032TM User Manual
Peerless Industries TV Mount HLG452 002 User Manual
Pentax Digital Camera 160 User Manual
Philips Battery Charger 136 User Manual
Philips Flat Panel Television TP3297B1 User Manual
Philips Portable DVD Player PET742 User Manual
Philips Stereo System SWA2124T User Manual
PQI Computer Drive U350 User Manual
ProForm Treadmill 495 LS User Manual
PSB Speakers Speaker CW80R User Manual