Philips DVD VCR Combo H982NUD User Manual
H982NUD_EN1 3/2/06 6:56 PM Page 1  
DIGITAL VIDEO DISC PLAYER &  
DVP3150V/37  
VIDEO CASSETTE RECORDER  
User manual  
Philips vous remercie de  
votre confiance.  
Thank you for choosing Philips.  
Gracias por escoger Philips.  
Need help fast?  
Besoin d'une aide  
rapide?  
Les Guide de mise en route rapide et Manuel de  
l'utilisateur regorgent d'astuces destinées à  
simplifier l'utilisation de votre produit Philips.  
Toutefois, si vous ne parvenez pas à résoudre  
votre probléme, vous pouvez accéder à  
notre aide en ligne à l'adresse  
Necesita ayuda  
inmediata?  
Lea primero la Guía de inicio rápido o el  
Manual del usuario, en donde encontrará  
consejos que le ayudarán a disfrutar  
plenamente de su producto Philips.  
Si después de leerlo aún necesita ayuda,  
consulte nuestro servicio de  
Read your Quick Start Guide and/or  
Owner's Manual first for quick tips  
that make using your Philips product  
more enjoyable.  
If you have read your instructions  
and still need assistance,  
you may access our online help at  
asistencia en línea en  
www.philips.com/usasupport  
ou formez le  
www.philips.com/usasupport  
or call  
www.philips.com/usasupport  
o llame al teléfono  
1-800-661-6162 (Francophone)  
1-888-PHILIPS (744-5477) (English speaking)  
Veillez à avoir votre produit à  
portée de main  
1-888-PHILIPS (744-5477)  
while with your product  
(and Model / Serial number)  
1-888-PHILIPS (744-5477)  
y tenga a mano el producto  
(y número de model / serial)  
(et model / serial nombre)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 3  
Safety Information 3  
IMPORTANT SAFETY INSTRUCTIONS  
Read before operating equipment  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
B. Objects have fallen, or liquid has been spilled into the appli-  
ance; or  
C. The appliance has been exposed to rain; or  
D. The appliance does not appear to operate normally or  
exhibits a marked change in performance; or  
E. The appliance has been dropped, or the enclosure damaged.  
17. Tilt/Stability - All televisions must comply with recommended  
international global safety standards for tilt and stability properties  
of its cabinet design.  
7. Do not block any of the ventilation openings. Install in accordance  
with the manufacturers instructions.  
• Do not compromise these design standards by applying exces-  
sive pull force to the front, or top, of the cabinet which could ulti-  
mately overturn the product.  
• Also, do not endanger yourself, or children, by placing electron-  
ic equipment/toys on the top of the cabinet. Such items could  
unsuspectingly fall from the top of the set and cause product dam-  
age and/or personal injury.  
8. Do not install near any heat sources such as radiators, heat regis-  
ters, stoves, or other apparatus (including amplifiers) that produce  
heat.  
9. Do not defeat the safety purpose of the polarized or grounding-  
type plug. A polarized plug has two blades with one wider than  
the other. A grounding type plug has two blades and third ground-  
ing prong. The wide blade or third prong are provided for your  
safety. When the provided plug does not fit into your outlet, con-  
sult an electrician for replacement of the obsolete outlet.  
18. Wall or Ceiling Mounting - The appliance should be mounted to  
a wall or ceiling only as recommended by the manufacturer.  
19. Power Lines - An outdoor antenna should be located away from  
10. Protect the power cord from being walked on or pinched particu-  
larly at plugs, convenience receptacles, and the point where they  
exit from the apparatus.  
power lines.  
20. Outdoor Antenna Grounding - If an outside antenna is connected to  
the receiver, be sure the antenna system is grounded so as to provide  
some protection against voltage surges and built up static charges.  
11. Only use attachments/accessories specified by the manufacturer.  
12.  
Use only with a cart, stand, tripod, bracket, or table  
specified by the manufacturer, or sold with the app-  
aratus. When a cart is used, use caution when moving  
the cart/apparatus combination to avoid injury from tip-over.  
Section 810 of the National Electric Code, ANSI/NFPA No. 70-  
1984, provides information with respect to proper grounding of  
the mast and supporting structure, grounding of the lead-in wire to  
an antenna discharge unit, size of grounding connectors, location  
of antenna-discharge unit, connection to grounding electrodes, and  
requirements for the grounding electrode. See Figure below.  
13. Unplug this apparatus during lightning storms or when unused for  
long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is  
required when the apparatus has been damaged in any way, such  
as power-supply cord or plug is damaged, liquid has been spilled  
or objects have fallen into apparatus, the apparatus has been  
exposed to rain or moisture, does not operate normally, or has  
been dropped.  
15. This product may contain lead and mercury. Disposal of these  
materials may be regulated due to environmental considerations.  
For disposal or recycling information, please contact your local  
authorities or the Electronic Industries Alliance: www.eiae.org  
21. Object and Liquid Entry - Care should be taken so that objects  
do not fall and liquids are not spilled into the enclosure through  
openings.  
a) Warning: To reduce the risk of fire or electric shock, this appa-  
ratus should not be exposed to rain or moisture and objects filled  
with liquids, such as vases, should not be placed on this apparatus.  
22. Battery Usage CAUTION - To prevent battery leakage that may  
result in bodily injury, property damage, or damage to the unit:  
• Install all batteries correctly, with + and - aligned as marked on  
the unit.  
• Do not mix batteries (old and new or carbon and alkaline, etc.).  
• Remove batteries when the unit is not used for a long time.  
16. Damage Requiring Service - The appliance should be serviced  
by qualified service personnel when:  
A. The power supply cord or the plug has been damaged; or  
Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC  
that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the  
building, as close to the point of cable entry as practical.  
Example of Antenna Grounding  
as per NEC - National Electric Code  
GROUND CLAMP  
ANTENNA LEAD IN WIRE  
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)  
GROUNDING CONDUCTORS (NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)  
ELECTRIC SERVICE EQUIPMENT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 4  
4 Safety Information (cont’d)  
Safety Precautions  
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or  
moisture.  
Federal Communications Commission (FCC) Warning: Any unauthorized changes or  
modifications to this equipment void the user’s authority to operate it.  
• Do not stand the unit up vertically. Install the unit in a horizontal and stable position.  
• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying  
the unit.  
Department of Health and Human Services (DHHS) Certification: Complies with 21  
Center for Radiation (CFR) chapter 1 subchapter J applicable at time of manufacture.  
Laser Safety: This unit employs a laser. Only a qualified service person should remove the  
cover or attempt to service this device, due to possible eye injury.  
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES  
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION  
EXPOSURE.  
CAUTION:VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK  
DEFEATED. DO NOT STARE INTO BEAM.THE BEAM IS LOCATED INSIDE, NEAR THE DECK  
MECHANISM.  
Special Information for Canadian Users: This Class B digital apparatus complies  
with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-  
003 du Canada.  
Radio/TV Interference: This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed  
to provide reasonable protection against harmful interference in a residential installation.This  
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
1) Reorient or relocate the receiving antenna.  
2) Increase the separation between the equipment and the receiver.  
3) Connect the equipment into an outlet on a circuit different from that to which the receiver  
is connected.  
4) Consult the dealer or an experienced radio/TV technician for help.  
Copyright Notice: The making of unauthorized copies of copy-protected material,  
including computer programs, files, broadcasts and sound recordings, may be an infringement of  
copyrights and constitute a criminal offence.This equipment should not be used for such purposes.  
Copyright Protection: Unauthorized copying, broadcasting, public performance, and  
lending of Discs are prohibited.  
This product incorporates copyright protection technology that is protected by U.S. patents  
and other intellectual property rights. Use of this copyright protection technology must be  
authorized by Macrovision, and is intended for home and other limited viewing uses only  
unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.  
Notice for Progressive Scan Use: Consumers should note that not all high  
definition television sets are fully compatible with this product and may cause artifacts to be  
displayed in the picture. In case of picture problems with 525 progressive scan output, it is  
recommended that the user switch the connection to the ‘standard definition’ output. If there are  
questions regarding your TV set compatibility with this 525p DVD player, please contact our  
customer service center.  
Note to the CableTV System Installer: This reminder is provided to call the  
Cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which  
provides guidelines for proper grounding – in particular, specifying that the cable ground shall be  
connected to the grounding system of the building, as close to the point of cable entry as possible.  
Declaration of Conformity  
Model Number:  
Trade Name:  
Responsible Party:  
DVP3150V/37  
Philips  
Philips Consumer Electronics North America  
P.O. Box 671539  
Marietta, GA 30006-0026  
1-888-PHILIPS (744-5477)  
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby  
Laboratories.  
Copyright 2006 Philips.All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 5  
Table of Contents 5  
General Information  
AdditionalVCR Features  
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . .3-4 Multi-ChannelTelevision Sound/Hi-Fi Stereo . . . . . .34  
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Playable Discs andVideo Cassettes . . . . . . . . . . . . . .7 Disc Playback Features  
Menus, Playback Control (PBC) Function . . . . . . . .35  
Fast Forward/Reverse Search . . . . . . . . . . . . . . . . .36  
x1.3 and x0.8 Rapid Play withVoice . . . . . . . . . . . . .36  
Hookups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-14 Title/Chapter Playback,Time Playback . . . . . . . . . . .37  
Remote Control Setup . . . . . . . . . . . . . . . . . . . . . .15 Track Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38  
First-time DVD/VCR Setup . . . . . . . . . . . . . . . . . . .16 Paused and Step-by-Step Playback, Resume On . . .39  
Repeat,A-B Repeat . . . . . . . . . . . . . . . . . . . . . . . . .40  
Initial DVD/VCR Setup  
Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41  
Subtitles, Camera Angles . . . . . . . . . . . . . . . . . . . . .42  
Basic Playback  
Video Cassette Playback . . . . . . . . . . . . . . . . . . . . .17 Audio Language, Stereo Sound Mode . . . . . . . . . . .43  
Disc Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Slow Motion, Zoom . . . . . . . . . . . . . . . . . . . . . . . .44  
Program /Random Playback . . . . . . . . . . . . . . . . . . .45  
TM  
MP3/Windows Media Audio/JPEG Playback . . .46-47  
Basic DVD/VCR Controls  
On-Screen Displays . . . . . . . . . . . . . . . . . . . . . .48-49  
Display Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Black Level,Virtual Surround . . . . . . . . . . . . . . . . . .50  
Front Panel, Rear Panel and Remote Control . . . . .20 Initializing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50  
AdditionalVCR Setup  
DVD Player Setup Options  
Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51-52  
Clock (VCR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53-54  
Language (VCR) . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Progressive Scan . . . . . . . . . . . . . . . . . . . . . . . . . . .54  
VCR Status Displays . . . . . . . . . . . . . . . . . . . . . . . .23 Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55  
Parental Password . . . . . . . . . . . . . . . . . . . . . . . . . .56  
Parental Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57  
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58-59  
VCR Recording Options  
Videotape Recording . . . . . . . . . . . . . . . . . . . . . . . .24  
Recording One Channel/Watching Another . . . . . .25  
One-Touch Recording . . . . . . . . . . . . . . . . . . . . . . .26 InformationYou May Need  
Rerecording (Tape Duplication) . . . . . . . . . . . . . . . .27 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60  
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . .28-29 Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . .61-63  
DVD toVideotape Duplication . . . . . . . . . . . . . . . .30 Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . .64  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64  
LimitedWarranty . . . . . . . . . . . . . . . . . . . . . . . . . . .65  
Information Index . . . . . . . . . . . . . . . . . . . . . . . . . .66  
Video Cassette Playing Options  
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Tape Counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Time Search, Index Search . . . . . . . . . . . . . . . . . . . .32  
Special Effects Playback . . . . . . . . . . . . . . . . . . . . . .33  
Automatic Operation Features . . . . . . . . . . . . . . . .33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 6  
6 Introduction  
Welcome!  
This DVD/VCR combines a DigitalVideo Disc (DVD) player and a Hi-FiVideo Cassette  
Recorder (VCR) into one unit, letting you play DVDs,Audio Compact Discs (Audio  
CDs), andVideo Cassettes on one piece of equipment.  
Read this owner’s manual carefully to learn how to use the features listed below.  
VCR Features  
• Repeat Playback  
• Automatic Head Cleaner  
• Searching:Time, Index, Forward and  
• Channel Setup  
Reverse  
• English, French and Spanish menus and  
• Slow Motion  
displays  
• Still Picture  
• Multi-ChannelTV Sound  
• Tape Counter  
• 19 Micron head  
• Tracking Adjustment  
• Recording: One-Touch andTimer  
Disc Features  
• Audio Language choices * • Windows Media Audio  
• Camera Angles *  
• DVD Menus in a desired • Dual Playback  
language *  
• Markers  
• MP3 Playback  
• JPEG Playback  
TM  
• Random Playback  
• Repeat,A-B Repeat  
• Resume On  
• Specific Time/Title/  
Chapter/Track Playback  
• Subtitles *  
Playback  
• Parental control *  
• Paused/Fast/Slow/  
Step-by-Step Playback  
• Program Playback  
• Progressive Scan  
• Zoom  
* If available on the disc  
Package Contents  
The following items are provided with your new DVD/VCR.  
• Remote Control and two AA batteries  
• One black RF coaxial cable, 75 ohm  
• One set of Audio (red and white tips) andVideo (yellow tips) cables  
• This Owner’s Manual and Quick Start Guide  
DVD Disc Menus...  
Some explanations in this manual describe DVD disc menus. DVD manufacturers set  
the menus, which vary among DVDs. Not all DVDs have menus. If the DVD has a  
menu, access it by pressing DVD, then DISC/VCR MENU on the remote control.  
Details are on page 35.  
DVD Player Setup Menu...  
Some instructions explain how to use the DVD player’s setup menu to set up features  
of the DVD player or a DVD. Access the DVD player menu by pressing  
SYSTEM/MENU on the remote control when playback is stopped. Even if a feature is  
set in the DVD player’s menu, it may not be available if the current DVD does not  
include that feature.  
Available Disc Features...  
All features described in this manual are not available on every disc. If  
the feature is not available on the disc, you cannot use the DVD/VCR  
to make it available. An “X” will appear in the top right corner of the  
TV screen if you try to access a feature that is not currently available.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 7  
Playable Discs and Video Cassettes 7  
Playable Discs  
The DVD player will play DigitalVideo Discs (DVDs); finalized DigitalVideo Discs Rewritable (DVD+RW);Video  
Compact Discs (VCDs);Audio Compact Discs (CDs); finalized Compact Discs Recordable (CD-R) and Compact  
Discs Rewritable (CD-RW).  
To play a DVD, make sure it meets the requirements for Region Codes and Color Systems as described  
below. Discs that have the following logos will play on the DVD player. Other disc types are not guaranteed  
to play in the DVD/VCR.  
On a Super Audio CD, only the sound on the normal CD layer can be heard.The sound on the high-density  
Super Audio CD layer cannot be heard.  
• Do not stand the unit up vertically. Install the unit in a horizontal and stable position.  
• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.  
DVD  
DVD+R DVD+RW  
Video  
CD  
Audio  
CD  
CD-R  
CD-RW  
MP3  
files  
is a trademark of DVD Format/Logo Licensing Corporation.  
Windows Media is a trademark of Microsoft Corporation.  
This unit is not compatible with Multiple Bit Rate  
(MBR:a file that contains the same content encoded at several different bit rates).  
ABOUTTHE PBC FUNCTION OFVIDEO CD  
This unit can playVideo CD 1.1 (without PBC) and 2.0 (with PBC).  
With version 2.0 (with PBC), you can use interactive menu (e.g., playlists) on the TV screen.  
When playing aVideo CD with PBC, some operations cannot be performed unless the PBC function is  
cancelled temporarily. See page 35 for more details.  
Region Codes  
DVDs must be labeled for ALL regions or for Region 1 in order to play on this DVD player.You cannot play  
DVDs that are labeled for other regions.  
Look for the symbols below on your DVDs. If these region symbols do not appear on your DVD, you  
cannot play the DVD in this player.  
The number inside the globe refers to a region of the world. Region 1 represents the  
United States, Canada, upper regions of North America, Bermuda, the U.S.Virgin  
Islands, and small regions near Australia.  
A disc encoded in a specific region format can only play on DVD players with the same region code. For  
example, if a disc is labeled for Region 2, you cannot play the DVD on this player.  
Color Systems  
Different color systems are available throughout the world.The most common color systems are NTSC,  
which is used primarily in the United States and North America, PAL, and SECAM.  
This DVD player will play both NTSC and PAL DVDs.You cannot play DVDs recorded in other formats.The  
color system of the DVD may be listed on the DVD or on the disc case.Your TV must have the NTSC  
and/or PAL color system as well.  
PlayableVideo Cassettes  
TheVCR of this DVD/VCR has a High Quality (HQ) system and is compatible with existingVideo Home  
System (VHS) equipment. Use only video cassettes that have the  
result in poor picture quality and excessive deposits on the  
mark.The use of other tapes may  
video heads, which may not be covered by the warranty if damage occurs.  
TheVCR also has a 19 micron head, which provides a better picture when you view tapes recorded in slow  
speed (SLP).  
Unacceptable Discs  
If you insert an unacceptable type of disc, a Disc Error message may appear on the TV screen.The following  
discs will not play on this DVD player.  
• CD-ROM  
• Video Single Disc (VSD)  
• Unfinalized disc  
• Compact Disc-Interactive (CD-I)  
• DVD-ROM  
• DVD-RAM  
• DVD-Audio  
TM  
• DVD contains MP3,Windows Media Audio  
or JPEG files  
On the following disc, the sound may not be heard.  
• Super Audio CD - Only the sound on the CD layer can be heard. The sound on the high-density Super  
Audio CD layer cannot be heard.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 8  
8 Hookups  
Determining the best possible connection...  
Your hookup will be determined primarily by your existing equipment, especially yourTV.These guidelines describe  
which options have the best picture and sound quality.You will not use all the jacks on the DVD/VCR.  
If yourTV only has an RF-style jack, usually labelled Antenna In, RF In or 75 ohm, use the ANT-OUT jack  
of the DVD/VCR to connect to theTV.This hookup provides both audio and video in a single cable. Set  
yourTV to channel 3 or 4 - the output channel of the DVD/VCR.This connection allows you to use both  
the DVD andVCR features. See page 9.  
★★★★ If yourTV has ComponentVideo In jacks (which could be labelledY CR CB,Y PR PB orYUV and may be  
green, blue and red), use the ComponentVideo jacks (Y CB/PB CR/PR) for the best picture quality. If you use  
only this video connection, only the DVD picture will be available.To see DVD features on theTV, set theTV  
to its ComponentVideo In channel. ComponentVideo provides the best picture quality. See page 12.  
Progressive Scan provides less flickering and higher image resolution than traditional (525i/480i or interlace)  
TV signals.  
If yourTV has Progressive Scan (525p/480p or progressive), connect theTV to the DVD/VCR’s  
COMPONENTVIDEO OUT (Y CB/PB CR/PR) jacks. Set PROGRESSIVE to ON in the DVD/VCR’s DISPLAY menu.  
See pages 53-54. P.SCAN will appear on the DVD/VCR’s display panel. Set yourTV to Progressive Scan also  
.
If yourTV does not have Progressive Scan but has ComponentVideo In jacks, connect them to  
the DVD/VCR’s COMPONENTVIDEO OUT jacks (Y CB/PB CR/PR). Set PROGRESSIVE to OFF either in the  
DISPLAY menu or by pressing and holding PLAY B (DVD) on the front of the DVD/VCR for more than 5  
seconds. See pages 53-54.  
★★★ If yourTV has an S-Video In jack (which also may be labelledY/C or S-VHS), use the S-VIDEO OUT jack for  
excellent picture quality. If you use only this video connection, only the DVD picture will be available.To see  
DVD features on theTV, set theTV to its S-Video In channel. See page 12.  
★★  
If yourTV has a single yellowVideo In jack (which also may be labelled CVBS, Composite or baseband), use  
the yellow DVD/VCRVIDEO OUT jack for good picture quality.This connection provides a picture for both  
the DVD player and theVCR.To see DVD orVCR features on theTV, set theTV to itsVideo In channel. See  
page 10.  
★★★★ If you have a Stereo with a Coaxial Digital Audio In jack, this provides the clearest sound for the DVD player.  
Connect the DVD/VCR’s COAXIAL DIGITAL AUDIO OUT jack to your Stereo for the best sound quality. If  
you use only this audio connection, only disc sound (noVCR) will be available. See page 14.  
★★★ If digital audio connections are not possible, connect the DVD/VCR’s red and white DVD/VCR AUDIO OUT  
jacks to the Audio In jacks of your Stereo orTV.This connection provides sound for both the DVD player  
and theVCR. See pages 12-13.  
Before you begin...  
● Refer to the manuals of yourTV, Cable Box, Stereo or other devices as necessary. Note the style of jacks and  
connectors on the other equipment. Determine how to choose different Audio andVideo In channels on your  
other equipment so you can see and hear the DVD/VCR material playing on theTV, Stereo, etc.  
● Disconnect all equipment from the power outlets. Connect the equipment to power only after you have finished  
hooking up everything. Never make or change connections with equipment connected to power.  
Remember...  
● Set theTV to the correctVideo In channel. Such channels may be called AUX or AUXILIARY IN,AUDIO/VIDEO or  
A/V IN, EXT1 or External In, etc.These channels often are located near channel zero (0). Or, yourTV’s remote may  
have a button or switch that selects theVideo Input channel. See yourTV manual for details. If you do not see the  
DVD orVCR playback on theTV, go to the lowestTV channel (01 or 02) and change channels downward until you  
see the DVD orVCR picture on theTV. Or, if yourTV has only a single Antenna In jack and you are using the RF  
coaxial cable (as described on page 9), set theTV to channel 3 or 4.  
To help you find the right Audio/Video In channel, turn on the DVD/VCR. Press DVD to put the DVD/VCR in DVD  
mode.With no disc in the player, a large DVDVideo logo will appear on theTV screen when you get theTV on the  
correct Audio/Video In channel or channel 3 or 4.  
● Set the Stereo to the correct channel or “source” mode.  
● Depending on your connection, you may need to purchase additional cables or adaptors. If yourTV or monitor has  
BNC-type connectors, you will need an adaptor.  
● To use theVCR features, you must include a connection with the supplied yellow video cable and  
red/white audio cables or with the supplied RF coaxial cable.  
Once you determine the best option, find your choice on pages 9-14. Follow the steps for the hookup  
you choose.Then, go to page 16 to complete the first-time setup.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 9  
Hookups (cont’d) 9  
DVD/VCR toTV only  
Simplest connection using only the supplied black RF coaxial cable  
This connection will let you use the features of both theVCR and the DVD player.  
DVD  
DVD/VCR VCR  
COMPONENT  
VIDEO OUT  
DIGITAL  
AUDIO S-VIDEO  
AUDIO OUT AUDIO IN  
OUT  
OUT  
ANT-IN  
AUDIO OUT  
Y
L
L
L
C
B
/
/
R
R
P
B
COAXIAL  
VIDEO OUT VIDEO IN  
ANT-OUT  
R
C
R
P
R
Antenna or  
Cable TV  
signal  
1
ANT-IN  
75  
ANT /  
CABLE  
Antenna In Jack  
(on back of TV)  
example only  
ANT-OUT  
Black RF coaxial  
cable (supplied)  
2
Disconnect the antenna or CableTV signal from yourTV and  
connect it to the ANT-IN (Antenna In) jack of your DVD/VCR.  
1
2
Connect the supplied black RF coaxial cable to the ANT-OUT  
(Antenna Out) jack on the back of the DVD/VCR and to the  
ANTENNA IN jack on theTV. The ANTENNA IN jack on the TV may be  
labelled TV IN, RF IN, 75Ω (ohm) or ANT-IN. See your TV owner’s manual for  
assistance.  
Plug in the power cord of yourTV.Turn on theTV and set it to  
channel 3 or 4.  
3
4
Plug in the power cord of the DVD/VCR.You are ready to turn on  
the DVD/VCR. Go to page 16 before turning it on.  
The DVD/VCR’s output channel is 3 when you purchase it. So, set your TV to  
channel 3 when the DVD/VCR is new.  
If you cannot use channel 3 at your TV, you can change the DVD/VCR’s output  
channel to channel 4.To do so, pressVCR to put the DVD/VCR inVCR mode.  
VCR light will be on the front of the DVD/VCR. Insert a videotape and press  
PLAY B to start playback. During playback, press and hold (VCR)  
PLAY B on the front of the DVD/VCR for 3-5 seconds. Each time you  
do this, the DVD/VCR’s output channel switches between 3 and 4, and the  
selected channel number appears on the display panel. Change your TV to  
channel 3 or 4 accordingly. (You cannot change the DVD/VCR’s output channel  
while adjusting tracking manually. Press STOP C to stop playback and cancel  
manual tracking, then press PLAY B to resume playing and change the output  
channel.)  
There is not a channel 3/4 switch on the DVD/VCR (as customary with most  
VCRs).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 10  
10 Hookups (cont’d)  
DVD/VCR to Cable Box or Satellite Receiver andTV  
Using only basic RF coaxial cables  
This connection will let you use the features of both theVCR and the DVD player.  
DVD/VCR  
2
Cable Box/Satellite Receiver  
1
Cable  
Signal  
75  
ANT /  
CABLE  
IN  
OUT  
ANT-IN  
RF coaxial cable  
ANT-OUT  
TV’s ANTENNA  
IN Jack  
RF coaxial cable  
3
Connections  
Connect a CableTV or Satellite signal to the IN  
jack on the Cable Box/Satellite Receiver.  
1
2
3
4
5
Use an RF coaxial cable (as the one supplied) to  
connect the OUT jack on the Cable Box/Satellite  
Receiver to the ANT-IN (Antenna In) jack on the  
DVD/VCR.  
Use a second RF coaxial cable to connect the  
ANT-OUT (Antenna Out) jack on the DVD/VCR to  
theTV’s Antenna In jack.  
Plug in the power cord of yourTV.Turn on theTV  
and set it to channel 3 or 4.  
Plug in the power cord of the DVD/VCR.You are  
ready to turn on the DVD/VCR. Go to page 16  
before turning it on.  
Remember...  
There are two ways to connect your Cable Box/Satellite Receiver  
to the DVD/VCR.With the connection on this page:  
● Select TV channels at the Cable Box/Satellite Receiver, not the  
DVD/VCR.To record or view TV channels, follow these steps:  
1) PressVCR to put the DVD/VCR inVCR mode.VCR light will  
appear on the front of the DVD/VCR.  
2) Press SKIP ∑/CH o or SKIP w/CH p to set the DVD/VCR  
to the Cable Box/Satellite Receiver output channel (03 or 04).  
3) Set the TV to the DVD/VCR’s output channel (03 or 04).The  
DVD/VCR’s output channel is channel 3 when the DVD/VCR is  
new.To change it from 3 to 4, press and hold  
Helpful Hint  
• If your Cable Box or Satellite  
Receiver has Audio andVideo  
Out jacks, use audio and video  
cables to connect them to the  
VCR AUDIO IN andVIDEO IN  
jacks on the rear of the  
DVD/VCR.You will not need  
the RF coaxial cable connection  
between the Cable Box/Satellite  
Receiver and the DVD/VCR as  
described at step 2.  
(VCR) PLAY B on the DVD/VCR for 3-5 seconds during tape  
playback. For more details, see step 4 on page 9.  
4) Select the channel you want to view/record at the Cable  
Box/Satellite Receiver.  
●
●
You may not view a channel other than the one you are recording.  
You can only program a timer recording for one channel at a time.  
Set your Cable Box/Satellite Receiver to the channel you want to  
record.When you enter the channel you want to record in a  
timer recording, select channel 03 or 04 (the Cable Box/Satellite  
Receiver output channel). (This is step 8 on page 28.) Leave the  
Cable Box/Satellite Receiver on for a timer recording.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 11  
Hookups (cont’d) 11  
DVD/VCR to Cable Box or Satellite Receiver andTV  
Using only basic RF coaxial cables  
This connection will let you use the features of both theVCR and the DVD player.  
DVD/VCR  
Cable  
Signal  
Cable Box/Satellite Receiver  
2
75  
ANT /  
CABLE  
ANT-IN  
1
ANT-OUT  
IN  
OUT  
RF coaxial cable  
TV’s ANTENNA  
RF coaxial cable  
IN Jack  
3
Connections  
Connect a CableTV or Satellite signal to  
the DVD/VCR’s ANT-IN (Antenna In) jack.  
1
Use an RF coaxial cable (as the one supplied) to connect  
the ANT-OUT (Antenna Out) jack on the DVD/VCR to  
2
the IN jack on the Cable Box/Satellite Receiver.  
Use a second RF coaxial cable to connect the OUT jack on  
the Cable Box/Satellite Receiver to the ANTENNA IN jack  
3
on theTV.  
Plug in the power cord of yourTV.Turn on theTV and set it  
to channel 3 or 4.  
4
Plug in the power cord of the DVD/VCR.You are ready to  
turn on the DVD/VCR. Go to page 16 before turning it on.  
5
Remember...  
There are two ways to connect your Cable Box/Satellite Receiver to the  
DVD/VCR.With the connection on this page:  
● You may watch one channel while recording another. Follow these steps:  
1) Put the Cable Box/Satellite Receiver on the same channel as the  
DVD/VCR’s output channel (03 or 04).The DVD/VCR’s output channel  
is channel 3 when the DVD/VCR is new.To alternate it between 3 and  
4, press and hold (VCR) PLAY B on the front of the DVD/VCR for 3-5  
seconds during tape playback. For details, see step 4 on page 9. Set the TV  
to the Cable Box/Satellite Receiver output channel (03 or 04).  
2) PressVCR to put the DVD/VCR inVCR mode.VCR light will appear  
on the front of the DVD/VCR.  
3) PressVCR/TV on the remote to chooseVCR position.  
K
L
4) Press SKIP ∑/CH or SKIP w/CH to select the channel you  
want to record at the DVD/VCR. Press RECORD I to start the  
recording.  
5) PressVCR/TV on the remote once to put the DVD/VCR in TV  
position.  
6) Select the channel you want to watch at the Cable  
Box/Satellite Receiver.  
● When you play a tape or disc, make sure the Cable Box/Satellite  
Receiver is set to the DVD/VCR’s output channel (03 or 04).  
Set the TV to the Cable Box/Satellite Receiver output channel (03 or  
04).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 12  
12 Hookups (cont’d)  
DVD/VCR to aTV that has Audio/Video, ComponentVideo or S-Video In jacks  
Audio and  
Video IN Jacks  
onTV  
Back ofTV  
Audio Cables  
AUDIO IN  
VIDEO IN  
COMPONENT  
3b  
VIDEO IN  
DVD/VCR  
AUDIO IN  
L
COMPONENT  
VIDEO OUT  
AUDIO OUT  
2
L
2
Y
Y
Cb/Pb  
r/Pr  
C
P
B
/
/
R
B
R
Antenna or CableTV  
Signal to ANT-IN Jack  
1
VIDEO OUT  
C
P
R
R
a
3
Video Cable  
Back ofTV  
AUDIO IN  
L
DVD/VCR  
COMPONENT  
VIDEO OUT  
S-VIDEO  
OUT  
AUDIO OUT  
DVD  
DVD/VCR VCR  
2
COMPONENT  
VIDEO OUT  
DIGITAL  
AUDIO IDEO  
AUDIO OUT 
Y
OUT UT  
ANT-IN  
AUDIO OUT  
Y
L
L
S-VIDEO IN  
L
C
B
/
/
C
B
/
/
R
R
P
B
P
B
R
COAXIAL  
VIDEO OUT VIDEO IN  
ANT-OUT  
R
R
VIDEO OUT  
C
R
3c  
PR  
Connect the antenna or CableTV signal to the ANT-IN (Antenna In)  
jack of your DVD/VCR.  
1
Connect the red and white audio cables (supplied) to the red and white  
DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red and  
2 white AUDIO IN jacks on theTV. Match the cable colors to the jack colors. If  
the TV has a single AUDIO IN jack, use the white audio cable to connect the  
DVD/VCR’s white DVD/VCR AUDIO OUT (left) jack to the TV’s AUDIO IN jack.  
You will not use the red cable. Or, purchase a “splitter” audio cable to go from the  
left/right AUDIO OUT jacks of the DVD/VCR to the TV’s single AUDIO IN jack.  
Connect the yellow video cable (supplied) to the DVD/VCRVIDEO  
3a  
OUT jack on the DVD/VCR and to theVIDEO IN jack on theTV.The  
VIDEO IN jack on the TV is usually yellow and may be labelled CVBS,  
Composite or Baseband video.  
Connect component video cable (not supplied) to the COMPONENT  
3b  
VIDEO OUT jacks on the DVD/VCR and to the COMPONENT  
VIDEO IN jacks on theTV. The ComponentVideo In jacks on the TV are  
usually red, blue and green.  
Connect an S-Video cable (not supplied) to the S-VIDEO OUT jack  
on the DVD/VCR and to the S-VIDEO IN jack on theTV.  
3c  
The connections 3b and 3c only supply video (picture) for the DVD player of  
the DVD/VCR.Therefore, in order to use theVCR features or view TV channels  
at the DVD/VCR, you still need to either connect the RF coaxial cable between  
the ANT-OUT jack of the DVD/VCR and the TV’s Antenna In jack, or connect  
the yellow video cable.To connect the supplied RF coaxial cable, see step 2 on  
page 9.To connect the supplied yellow video cable, see step 3a.  
Connect the power cords of theTV and the DVD/VCR to a power  
outlet.Turn on theTV and set it to the correctVideo In channel.  
4 If you are using the RF coaxial cable forVCR playback, choose channel 3 or 4 at  
the TV. If you are using the yellow video cable forVCR playback, choose theVideo  
In channel at your TV. To find the correctVideo In channel, go to your lowest TV  
channel and change channels downward until you seeVCR playback on the TV  
screen.To help you find the rightVideo In channel, turn on the DVD/VCR. Press  
DVD to put the DVD/VCR in DVD mode.With no disc in the player, a large DVD  
Video logo will appear on the TV screen when you get the TV on the correct  
Video In channel.  
You are ready to turn on the DVD/VCR. Go to page 16 to complete the  
first-time setup.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 13  
Hookups (cont’d) 13  
DVD/VCR to aTV and a Stereo  
Antenna/Cable  
TV Signal  
1
DVD  
DVD/VCR VCR  
AUDIO OUT A
COMPONENT  
VIDEO OUT  
DIGITAL  
AUDIO S-VIDEO  
OUT  
OUT  
ANT-IN  
AUDIO OUT  
Y
L
L
L
CB  
/
R
R
PB  
COAXIAL  
VIDEO OUT VIDEO IN  
ANT-OUT  
R
C
R
/
P
R
VIDEO IN  
AUDIO (LEFT) IN  
AUDIO (RIGHT) IN  
3
2
Connect the antenna or CableTV signal to the ANT-IN (Antenna In)  
jack of your DVD/VCR.  
1
2
Connect the supplied red and white audio cables to the red and  
white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red  
and white AUDIO IN jacks on the Stereo. Match the cable colors to the  
jack colors.  
Connect the supplied yellow video cable to the DVD/VCRVIDEO  
OUT jack on the DVD/VCR and to theVIDEO IN jack on theTV.  
To use ComponentVideo cable or S-Video cable instead for the DVD player,  
see page 12.You will still need the yellow video cable or RF coaxial cable for  
VCR features.  
3
4
Connect the power cords of the DVD/VCR,TV and Stereo to a  
power outlet.Turn on theTV and set it to theVideo In channel. Or,  
simply go to your TV’s lowest channel (02 or 03) and continue changing  
channels downward at the TV until you seeVCR or DVD playback on the TV  
screen.  
To help you find the rightVideo In channel at the TV, turn on the DVD/VCR. Press  
DVD to put the DVD/VCR in DVD mode.With no disc in the player, a large DVD  
Video logo will appear on the TV screen when you get the TV on the correct  
Video In channel.  
Turn on the Stereo and set it to the correct Auxiliary or Source mode.  
Check your Stereo manual for details.  
You are ready to turn on the DVD/VCR. Go to page 16 before  
turning on the DVD/VCR.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 14  
14 Hookups (cont’d)  
DVD/VCR to aTV and to a Stereo that is Dolby Digital-compatible  
Using Digital Audio connections  
Antenna/Cable TV Signal  
1
Back of TV  
(example only)  
DVD  
DVD/VCR VCR  
COMPONENT  
VIDEO OUT  
DIGITAL  
AUDIO S-VIDEO  
AUDIO OUT AUDIO IN  
OUT  
OUT  
ANT-IN  
AUDIO OUT  
Y
L
L
L
C
B
/
/
R
R
P
B
COAXIAL  
VIDEO OUT VIDEO IN  
ANT-OUT  
R
C
R
PR  
Stereo  
3
VIDEO IN  
COAXIAL  
DIGITAL  
AUDIO IN  
2
Connect the antenna or CableTV signal to the ANT-IN (Antenna In) jack  
of your DVD/VCR.  
1
Connect a coaxial digital audio cable (not supplied) to the DVD/VCR’s  
COAXIAL DIGITAL AUDIO OUT jack and to the COAXIAL DIGITAL  
2 AUDIO IN jack on the Stereo.  
This digital audio connection only provides sound for the DVD player of the DVD/VCR.  
So, in order to use theVCR features or hear TV channels at the DVD/VCR, you still  
need to either connect the RF coaxial cable between the ANT-OUT jack of the  
DVD/VCR and theTV’s Antenna In jack, or connect the supplied red/white audio cables.  
To connect the supplied RF coaxial cable, see step 2 on page 9.To connect the red/white  
audio cables, see step 2 on page 12.  
Connect the supplied yellow video cable to the yellow DVD/VCRVIDEO  
OUT jack on the DVD/VCR and to theVIDEO IN jack on theTV. To use  
3
component video cable or S-Video cable instead for the DVD player, see  
page 12.You will still need the yellow video cable or RF coaxial cable forVCR  
features.  
Plug in the power cords of the Stereo,TV and DVD/VCR.Turn on the  
Stereo and select its Auxiliary IN channel.Turn on theTV and set it to  
4 the correctVideo In channel. Go to yourTV’s lowest channel (01 or 02) and  
change channels downward until you see DVD orVCR material on theTV screen.  
To help you find the rightVideo In channel on theTV, turn on the DVD/VCR. Press  
DVD to put the DVD/VCR in DVD mode.With no disc in the player, a large DVD  
Video logo will appear on theTV screen when you get theTV on the correctVideo  
In channel.  
Make sure PROGRESSIVE is OFF and P.SCAN does not appear on the DVD/VCR’s  
display panel. Disable Progressive Scan either in the DISPLAY menu or by  
pressing and holding PLAY B (DVD) on the front of the DVD/VCR for more  
than 5 seconds. Details are on pages 8 and 54.  
You are ready to turn on the DVD/VCR. Go to page 16 before turning on  
the DVD/VCR.  
5
Remember...  
Some DVDs are recorded in Dolby Digital 5.1 channel Surround Sound. Select Dolby Digital  
5.1 channel Surround Sound in the DVD disc menu. If Dolby Digital Surround Sound is not  
recorded on the disc, you will not have surround sound available.  
If you connect the DVD/VCR to a Dolby Digital Stereo, set DOLBY DIGITAL to  
BITSTREAM in the DVD player’s setup menu. Details are on page 55. If the DVD/VCR is not  
connected to a Dolby Digital-compatible Stereo, set DOLBY DIGITAL to PCM.  
Incorrect settings may cause noise distortion and damage the speakers.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 15  
Remote Control Setup 15  
Putting Batteries in the Remote Control  
Remove the battery compartment lid on the bottom  
of the remote control by pressing the tab, then lifting the  
1
2
3
lid.  
1
2
3
Place two AA batteries inside the battery  
compartment with their  
indicated.  
ends aligned as  
+ and –  
Replace the battery compartment lid.  
Using the Remote Control  
● Point the remote control at the DVD/VCR’s remote sensor (see  
page 20) when using the remote to operate the DVD/VCR. Do  
not point the remote at the TV.  
● Do not put objects between the remote and the DVD/VCR.  
Recycling Guidelines/Battery Safety  
● Your new product and its packaging contain materials that can  
be recycled and reused. Specialized companies can recycle your  
product to increase the amount that needs to be properly  
disposed.Your product uses batteries that should not be thrown  
away when depleted but should be disposed of as small chemical  
waste. Please find out about the local regulations on disposal of  
your old product, batteries and packaging whenever you replace  
existing equipment.  
● Battery Usage CAUTION - To prevent battery leakage that may  
result in bodily injury, property damage or damage to the unit:  
• Install ALL batteries correctly, with the  
markings on  
+ and –  
the battery aligned as indicated on the unit.  
• Do not mix batteries, for example, old with new or carbon  
with alkaline.  
• Remove batteries when the unit will not be used for a long  
time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 16  
16 First-time DVD/VCR Setup  
Before turning on your DVD/VCR, make sure batteries are in the  
remote control and the DVD/VCR and TV are connected correctly.  
You cannot program channels if you are using a Cable Box or a  
Satellite Receiver.  
These menus may not appear if you have already turned  
on the DVD/VCR.  
Turn on the TV.  
1
STANDBY-ON  
SEARCH MODE  
DISPLAY  
AUDIO  
2
REPEAT REPEAT  
Turn on theTV. Set it to channel 3 or 4 or its  
A-B  
AUDIO/VIDEO IN channel, depending on how you  
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
1
2
connected the DVD/VCR to a TV.  
RETURN  
TITLE CLEAR/RESET SLOW  
PressVCR, then press STANDBY-ONy. VCR light will  
appear on the front of the DVD/VCR.The display shown  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
below will appear.  
These menus may not appear if you have already turned on  
the DVD/VCR.You may have turned on the DVD/VCR  
before to find the Audio/Video In channel of the TV, for  
example. If so, follow the steps on page 21 to set up  
channels and page 23 to select a language for theVCR  
menus.  
OK  
3-4  
STOP  
PLAY  
PAUSE  
TIMER SET  
SPEED  
MARKER  
RECORD  
LANGUAGE SELECT  
BENGLISH  
FRANCAIS  
ESPAÑOL  
[ON]  
1
2
6
0
3
7
4
8
5
9
+10  
PUSH  
B
Press K or L to select ENGLISH, FRANCAIS  
(French) or ESPAÑOL (Spanish) as the language for  
VCR on-screen displays and menus. Then, press B. The  
display shown below will appear.  
3
4
Helpful Hints  
AUTO SET UP  
• To skip this feature and play a  
tape immediately, insert a tape  
with its record tab removed.  
• If you like to skip step 4, press  
DISC/VCR MENU as soon as the  
search begins.The DVD/VCR will  
stop the channel search, and the  
VCR menus and displays will be  
in English.  
• If you try to program channels  
when there is no antenna or  
CableTV signal connected to the  
ANT-IN jack of the DVD/VCR,  
programming will stop.AUTO  
SET UP will stop flashing.  
PUSH  
B
Press B to begin channel programming. AUTO  
SETUP will flash on the TV screen during the channel  
search.The DVD/VCR will memorize all available channels.  
When channel programming is complete, the lowest  
available channel will appear on the TV.  
These channels will be available when you want to watch  
TV while inVCR mode.To put the DVD/VCR inVCR  
mode, pressVCR soVCR light appears. Use SKIP ∑/CH  
K
or SKIP w/CH L to select memorized channels.To select  
Connect an antenna or CableTV  
signal to the DVD/VCR’s  
ANT-IN jack and press B again.  
• Repeat this process if the power  
fails.  
non-memorized channels, use the Number buttons.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 17  
Video Cassette Playback 17  
Read and follow the steps below to play a tape.  
Turn on theTV. Set it to channel 3 or 4 or its  
AUDIO/VIDEO IN channel. This depends on how you  
connected the DVD/VCR to a TV.  
Turn on the TV.  
1
2
1
2
Insert a tape in the  
DVD/VCR.  
Details are on pages 8-14.  
With the DVD/VCR power off, insert a tape in the  
cassette compartment of the DVD/VCR. VCR light  
will appear on the front of the DVD/VCR. If the tape’s  
record tab has been removed, playback will start  
automatically.  
If the DVD/VCR power is already on, pressVCR to put the  
DVD/VCR inVCR mode if necessary.VCR light will appear  
on the front of the DVD/VCR.  
STANDBY-ON  
SEARCH MODE  
DISPLAY  
AUDIO  
REPEAT REPEAT  
A-B  
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
RETURN  
TITLE CLEAR/RESET SLOW  
If playback does not start automatically, pressVCR,  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
then press PLAY B.  
3
4
5
6
3
Press STOP C to stop playback.  
OK  
5
4
Press h to rewind the tape.  
STOP  
PLAY  
PAUSE  
TIMER SET  
SPEED  
MARKER  
RECORD  
After the tape stops, press STOP/EJECT CA on the  
front of the DVD/VCR to remove the tape.  
1
2
6
0
3
7
4
8
5
9
+10  
Press STOP/EJECT C A  
on the DVD/VCR.  
6
Helpful Hints  
• Other tape playback features are  
on pages 31-34.  
• If AUTO REPEAT is ON, playback  
will begin when you insert a tape,  
even when the record tab is  
intact. Details are on page 31.  
• You must connect the DVD/VCR  
to aTV using the RF coaxial  
cable or the audio/video cables in  
order to use theVCR features.  
These hookups are explained on  
pages 9 and 12.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 18  
18 Disc Playback  
Before you begin, turn on the TV, Stereo and other equipment  
connected to the DVD/VCR. Make sure the TV and the Stereo (if  
applicable) are set to the correct channel.  
STANDBY-ON  
SEARCH MODE  
DISPLAY  
1
Details are on pages 8-14.  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
Press STANDBY-ONy to turn on the DVD/VCR.  
1
SUBTITLE ZOOM  
SKIP / CH  
RETURN  
TITLE CLEAR/RESET SLOW  
Press DVD so DVD light appears on the front of the  
DVD/VCR.  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
2
2
5
Press OPEN/CLOSE A on the DVD/VCR to open  
the disc tray.  
OK  
3
Place a disc into the tray. If the DVD is recorded on  
only one side, place the disc in the tray with the label facing  
STOP  
PLAY  
PAUSE  
4
up and the shiny side facing down. Some DVDs are  
6
recorded on both sides. Make sure the label of the side you  
want to play is facing up.  
Press OPEN/CLOSE  
on the DVD/VCR.  
A
3
4
Press PLAY B to close the tray. The tray will close and  
Insert a disc.  
playback will begin. If playback does not start automatically,  
5
press PLAY B again.  
If a DVD menu appears instead, see page 35.  
TM  
Helpful Hints  
To play MP3,Windows Media Audio or JPEG files, see  
page 46-47.  
• An “X” may appear at the top right  
corner of the TV screen when you  
try a feature. Either the feature is  
not available on the disc, or the  
DVD/VCR cannot access the  
feature at this time.This does not  
indicate a problem with the  
DVD/VCR.  
• If a disc is dirty or scratched, the  
picture may appear distorted or  
playback may stop. In such cases,  
remove the disc and turn off the  
DVD/VCR. Disconnect the power  
cord, then reconnect it. Clean the  
disc, then turn on the DVD/VCR  
again and reinsert the disc for  
playback.  
You also can close the tray by pressing  
OPEN/CLOSE A.  
Press STOP C to stop playback.  
6
• If a disc has multiple layers, the  
picture may freeze occasionally.This  
happens when the first layer  
switches to the second layer.This is  
not a malfunction.  
• When the DVD or CD light  
appears on the display panel, the  
disc is loaded and ready for  
playback.  
• When you press OPEN/CLOSE  
A
or PLAY (DVD) on the front of the  
DVD/VCR when the power is off,  
the DVD/VCR will turn on in DVD  
mode. Otherwise, the DVD/VCR  
will turn on in the mode in which it  
was turned off.  
• If you use PLAY B to close the  
Disc tray, playback starts  
REMINDER:This DVD/VCR  
will play only certain discs.  
See page 7 for details.  
automatically. If you use  
OPEN/CLOSE A to close the disc  
tray, you have to press PLAY B to  
start playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 19  
Display Panel 19  
VCR light  
DVD light  
This light appears when the DVD/VCR is inVCR mode.You can only  
watch videotapes or accessVCR features andTV channels whenVCR  
light is on.To makeVCR light come on, pressVCR on the remote  
control or SOURCE on the front of the DVD/VCR.  
This light appears when the DVD/VCR is in  
DVD mode.You can only watch DVDs when  
DVD light is on.To make DVD light come  
on, press SOURCE on the front of the  
DVD/VCR or DVD on the remote.  
Display  
Messages about current disc operations  
appear here. See Display Messages below.  
Cassette  
Disc tray  
Compartment  
Insert a video  
cassette here.  
Insert a disc here.  
DVP 3150V DVD PLAYER/VCR  
OPEN/CLOSE  
ONE TOUCH RECORDING LONG PLAY  
•
STANDBY-ON  
VIDEO  
L
AUDIO  
R
REW  
F.FWD STOP/EJECT PLAY  
REC  
CHANNEL  
VCR  
DVD  
STOP  
PLAY  
SOURCE  
DVD  
DVD Display Panel  
Appears when a repeat function  
is active  
Appears when Progressive  
Scan is active  
GROUP  
P.SCAN  
Appears when  
A-B Repeat is on  
DVD  
Appears when  
ALL Repeat is on  
(Video CD, CD, MP3,  
Windows Media Audio  
and JPEG)  
VCD  
TM  
Displays the current disc type  
• DVD: DVD  
• VCD: Video CD  
Displays the elapsed playing time  
of the current title or track; briefly  
displays a track, chapter or title  
number when playback begins.  
Appears when disc playback  
is paused  
• CD: Audio CD, MP3,  
TM  
Windows Media Audio,  
Appears during slow motion  
playback (DVD,Video CD)  
JPEG  
Appears during disc playback  
VCR Display Panel  
IndicatesVCR position  
Appears when a timer recording  
or an OTR has been set  
Indicates a tape is in the DVD/VCR  
Appears during recording;  
flashes when recording is  
paused  
VCR  
REC  
Appears if Repeat Playback  
is active  
PM  
Indicates current time is P.M.  
There is no A.M. indication.  
Appears if tape playback  
is paused or during slow motion  
tape playback  
Indicates the elapsed playing time of a tape; also displays a channel  
number, tape speed, remaining time for an OTR or the current time  
Appears during tape playback  
Display Messages  
Appears after the disc tray  
Tray is closing.  
Disc is loading.  
closes if the tray is empty,  
if there is an error reading  
the disc, or if an unacceptable  
disc is installed.  
Appears when Playback  
Control is active (Video CD).  
Tray is opening or is open.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 20  
20 Front Panel, Rear Panel and Remote Control  
Front Panel  
Remote Sensor  
CHANNEL KL Buttons  
OPEN/CLOSE A Button (DVD)  
STANDBY-ONy Button  
DVP 3150V DVD PLAYER/VCR  
OPEN/CLOSE  
ONE TOUCH RECORDING LONG PLAY  
•
STANDBY-ON  
VIDEO  
L
AUDIO  
R
REW  
F.FWD STOP/EJECT PLAY  
REC  
CHANNEL  
VCR  
DVD  
STOP  
PLAY  
AUDIO and VIDEO  
In jacks  
SOURCE  
DVD  
REW h Button (VCR)  
REC  
I
PLAY B Button (DVD)  
STOP C Button (DVD)  
SOURCE Button  
Button (VCR)  
F.FWD g Button (VCR)  
STOP/EJECT C A Button (VCR)  
PLAY B Button (VCR)  
Rear Panel  
Helpful Hint  
DVD/VCR AUDIO  
OUT jacks Left (white)  
and Right (red)  
DVD COMPONENT  
VIDEO OUT  
ANT-IN  
(Antenna In)  
jack  
• The DVD S-VIDEO OUT,  
DVD COMPONENT  
VIDEO OUT, DVD  
VCR AUDIO IN  
jacks Left (white)  
and Right (red)  
(Y CB/PB  
CR/PR) jacks  
(green, blue, red)  
AUDIO OUT and DVD  
COAXIAL DIGITAL  
AUDIO OUT jacks are  
only useful in DVD mode.  
To have sound and picture  
inVCR mode, you must  
connect either the RF  
coaxial cable or the  
DVD  
DVD/VCR VCR  
COMPONENT  
VIDEO OUT  
DIGITAL  
AUDIO S-VIDEO  
AUDIO OUT AUDIO IN  
OUT  
OUT  
ANT-IN  
AUDIO OUT  
Y
L
L
L
CB  
PB  
/
/
R
R
COAXIAL  
VIDEO OUT VIDEO IN  
ANT-OUT  
R
CR  
PR  
AC Power Cord  
DVD S-VIDEO  
OUT jack  
VCR VIDEO IN  
jack (yellow)  
DVD COAXIAL  
DIGITAL AUDIO  
OUT jack (black)  
audio/video cables  
ANT-OUT  
(Antenna Out)  
jack  
DVD AUDIO OUT  
jacks Left (white)  
and Right (red)  
supplied. Details are on  
pages 9 and 12.  
DVD/VCR VIDEO  
OUT jack (yellow)  
ZOOM Button  
STANDBY-ON  
MODE Button  
STANDBY-ONy Button  
DISPLAY Button  
AUDIO Button  
Helpful Hints  
SEARCH MODE  
DISPLAY  
AUDIO  
SEARCH Button  
A-B REPEAT Button  
REPEAT Button  
SUBTITLE Button  
RETURN Button  
TITLE Button  
VCR Button  
VCR/TV Button  
DISC/VCR/MENU Button  
REPEAT REPEAT  
A-B  
• For DVD player features,  
press DVD before  
ANGLE Button  
SUBTITLE ZOOM  
ANGLE  
SKIP CH  
/
SKIP ∑/CH K or  
pressing other buttons.  
To put the DVD/VCR in  
DVD mode, press DVD  
or SOURCE so DVD  
light appears on the front  
of the DVD/VCR.  
SKIP w/ CH  
L
RETURN  
TITLE CLEAR/RESET SLOW  
SLOW Button  
CLEAR/RESET Button  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
DVD Button  
SYSTEM/MENU Button  
OK Button  
OK  
g (Fast Forward)  
s B KL Buttons  
• ForVCR features, press  
VCR before pressing any  
other buttons.To put the  
DVD/VCR inVCR mode,  
pressVCR or SOURCE  
soVCR light appears on  
the front of the  
Button  
h (Rewind) Button  
STOP C Button  
PLAY B Button  
TIMER SET Button  
SPEED Button  
STOP  
PLAY  
PAUSE  
PAUSE k Button  
TIMER SET  
SPEED  
MARKER  
RECORD  
RECORD I Button  
1
2
6
0
3
7
MARKER Button  
Number Buttons  
4
8
5
9
+10  
DVD/VCR.  
Remote Control  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 21  
Channel Setup 21  
Although your DVD/VCR may automatically memorize the  
channels you receive when you turn it on for the first time, you  
can set up the channels again.  
STANDBY-ON  
SEARCH MODE  
DISPLAY  
AUDIO  
PressVCR, then press DISC/VCR MENU so MENU  
appears. If the clock has never been set, the CLOCK SET  
1 menu may appear when you press DISC/VCR MENU. If so,  
REPEAT REPEAT  
A-B  
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
follow the instructions from step 3 on page 22.  
4
RETURN  
TITLE CLEAR/RESET SLOW  
- M E N U -  
B TIMER PROGRAMMING  
AUTO REPEAT  
CHANNEL SET UP  
CLOCK SET  
LANGUAGE SELECT  
AUDIO OUT  
TV STEREO  
[OFF]  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
1
[ON]  
SAP  
OK  
2-3  
STOP  
PLAY  
PAUSE  
Press K or L to select CHANNEL SET UP.  
Then, press B.  
2
TIMER SET  
SPEED  
MARKER  
RECORD  
Press K or L to select AUTO SET UP.  
Then press B.  
1
2
3
3
AUTO SET UP will flash while the DVD/VCR sets up the  
available channels.When setup is complete, the lowest available  
4 channel will appear on the TV.  
K
Now when you press SKIP ∑/CH or  
STANDBY-ON  
L
SKIP w/CH , you will scan only through available channels.  
You still can select any channel using the Number buttons.  
SEARCH MODE  
DISPLAY  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
Adding/Deleting Channels  
SUBTITLE ZOOM  
SKIP / CH  
You may want to add or delete TV channels if your channel lineup  
changes or if you no longer watch some channels.  
RETURN  
TITLE CLEAR/RESET SLOW  
Follow the steps 1-2 above.  
5
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
1
1
2-4  
Press K or L to select MANUAL SET UP.  
Then press B.  
2
OK  
Press K or L until the channel number you  
want to add or delete appears on the screen.  
3
STOP  
PLAY  
PAUSE  
Press s or B so ADD or DELETE flashes on the  
screen.  
TIMER SET  
SPEED  
MARKER  
RECORD  
4
MANUAL SET UP  
1
2
3
CHANNEL 30 (CATV)  
ADD  
Helpful Hints  
• You cannot program channels if  
you are using a Cable Box or  
Satellite Receiver.  
• If you have an antenna, channels  
2-69 will be possible. If you have  
Cable TV, channels 1-125 will be  
possible.  
• To stop Channel Setup, press  
DISC/VCR MENU while AUTO  
SET UP is flashing.  
While your choice is flashing, press CLEAR/RESET.  
The channel you added or deleted will be the current  
5 channel.Added channels are available when you flip through  
K
L
channels using SKIP ∑/CH and SKIP w/ CH .You still  
can select deleted channels with the Number buttons.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 22  
22 Clock (VCR)  
Follow these steps to set theVCR clock. Make sure:  
STANDBY-ON  
PressVCR, then press DISC/VCR MENU so MENU  
SEARCH MODE  
DISPLAY  
appears. If the clock has never been set, the CLOCK SET  
1
menu may appear when you press DISC/VCR MENU. If so,  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
follow the instructions from step 3 on this page.  
Press K or L to select CLOCK SET.Then, press B.  
2
SUBTITLE ZOOM  
SKIP / CH  
RETURN  
TITLE CLEAR/RESET SLOW  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
While the MONTH space is flashing, press K or  
until the month appears.Then, press B.  
L
9
1
2-9  
3
4
5
CLOCK SET  
OK  
MONTH DAY  
0 3 – –  
YEAR  
/
– – – –  
HOUR MINUT  
– – – –  
EAM/PM  
– –  
STOP  
PLAY  
PAUSE  
:
TIMER SET  
SPEED  
MARKER  
RECORD  
1
2
6
0
3
7
4
8
5
9
While the DAY space is flashing, press K or L until  
the day appears.Then, press B.  
+10  
CLOCK SET  
MONTH DAY  
0 3 2 0  
YEAR  
– – – –  
/
HOUR MINUTE  
– – – –  
AM/PM  
– –  
:
While theYEAR space is flashing, press K or  
L
until the year appears.Then, press B. The day of  
the week will appear automatically.  
CLOCK SET  
MONTH DAY  
0 3 / 2 0 MON 2 0 0 6  
YEAR  
Helpful Hints  
HOUR MINUTE  
– – : – –  
AM/PM  
– –  
• If the clock has never been set,  
the CLOCK SET menu may  
appear when you press  
DISC/VCR MENU. If so, follow  
the instructions from step 3  
above.  
• Press DISPLAY until the time  
appears on theTV screen.  
• Power failures of more than 30  
seconds can erase the clock  
setting.  
• To reset the clock, follow steps  
1-2. Select the information you  
want to change using s or B.  
When the information is  
flashing, use K or L to enter  
the correct information. Press  
CLEAR/RESET to set the clock.  
While the HOUR space is flashing, press K or  
L
until the hour appears.Then, press B.  
6
7
8
While the MINUTE space is flashing, press K or  
until the minute appears.Then, press B.  
L
L
While the AM or PM space is flashing, press K or  
to point to AM or PM.  
Your selection will flash on the screen in the AM/PM space.  
Press CLEAR/RESET or B to start the clock.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 23  
Language (VCR) 23  
Follow the steps below to change the language of theVCR  
on-screen displays and menus.  
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
RETURN  
TITLE CLEAR/RESET SLOW  
PressVCR, then press DISC/VCR MENU so MENU appears.  
4
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
1
- M E N U -  
1
B TIMER PROGRAMMING  
AUTO REPEAT  
CHANNEL SET UP  
CLOCK SET  
[OFF]  
OK  
LANGUAGE SELECT  
AUDIO OUT  
TV STEREO  
2-3  
[ON]  
SAP  
STOP  
PLAY  
PAUSE  
Press K or L to choose LANGUAGE SELECT,  
then press B.  
2
3
Helpful Hint  
• If you select FRANCAIS  
Press K or L to choose ENGLISH, FRANCAIS  
(French) or ESPAÑOL (Spanish).  
(French), or ESPAÑOL (Spanish)  
and need English:  
LANGUAGE SELECT  
1) Press DISC/VCR MENU so  
MENU appears.  
2) Press L to choose  
SELECTION LANGUE or  
SELEC. IDIOMA, then press B.  
3) Press K or L to select  
ENGLISH.  
B ENGLISH  
FRANCAIS  
ESPAÑOL  
[ON]  
Press CLEAR/RESET to remove the menu.  
4) Press CLEAR/RESET.  
4
23 VCR Status Displays  
You may access status displays by pressing DISPLAY.The displays  
may include the current time, channel and other information.  
STANDBY-ON  
SEARCH MODE  
DISPLAY  
AUDIO  
Press DISPLAY. The COUNT display will appear for 5  
seconds.After 5 seconds, only the real-time tape counter  
1 will appear.This counter shows you the elapsed playing  
1-3  
REPEAT REPEAT  
A-B  
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
time of the tape (from the point at which the counter was  
set to 0).The counter also will appear on the display panel  
on the front of the DVD/VCR.  
RETURN  
TITLE CLEAR/RESET SLOW  
Press DISPLAY again. The CLOCK display will appear  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
for 5 seconds.After 5 seconds, only the time will appear  
2 (the clock must be set). (If you are watching TV, the channel  
number and the availability of stereo or second audio will  
also appear.) The time also will appear on the display panel  
on the front of the DVD/VCR.  
Helpful Hints  
• If the channel you select has no  
broadcast, the screen will be  
solid blue.  
STOP  
STOP  
5:40 PM  
CH 02  
STEREO  
SAP  
• You cannot access a status  
display when viewing a still  
picture, during slow motion, or  
during forward and reverse  
searching.  
SLP  
0:12:34  
HIFI  
SLP  
• Channel numbers appear on the  
screen for a few seconds each  
time you change channels.  
Press DISPLAY again to remove all the displays.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 24  
24 Videotape Recording  
Read and follow the steps below to record a television program  
onto a videotape.  
● Before you begin, make sure the DVD/VCR is inVCR mode.  
PressVCR soVCR light appears on the front of the DVD/VCR.  
Turn on the TV.  
1
2
Insert a tape in the  
DVD/VCR.  
Turn on theTV and set it to channel 3 or 4 or the  
Video In channel. If you connected the DVD/VCR to the  
STANDBY-ON  
1
TV using the supplied audio and video cables, select your  
TV’sVideo In channel. Details are on page 12.  
If you connected the DVD/VCR to the TV using the  
supplied RF coaxial cable, choose channel 3 (or 4) at the TV.  
Details are on pages 9-11.  
SEARCH MODE  
DISPLAY  
AUDIO  
REPEAT REPEAT  
A-B  
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
4
6
RETURN  
TITLE CLEAR/RESET SLOW  
Insert a tape with its record tab intact into the  
cassette compartment of the DVD/VCR. If tape  
2
3
4
5
6
7
playback begins, press STOP C.  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
Press SPEED until the desired tape speed (SP or  
SLP) appears briefly on the screen. Details about tape  
OK  
speed are on page 60.  
K
L
Press SKIP ∑/CH or SKIP w/CH or the  
Number buttons to select theTV channel to  
record.  
STOP  
PLAY  
PAUSE  
TIMER SET  
SPEED  
MARKER  
RECORD  
7
1
2
6
0
3
7
Press RECORD I to start recording. “REC” will  
appear on the DVD/VCR’s display panel.  
3
4
8
5
9
+10  
To pause the recording, press PAUSE k once. “REC”  
will flash. To resume recording, press RECORD I or  
press PAUSE k again. “REC” will reappear.  
4
5-6  
• Other recording options are on  
pages 25-30.  
To stop recording, press STOP C.  
Helpful Hints  
• TheVCR will record in a preset  
volume.  
Recording Prevention  
Video cassettes have record tabs to ensure that recordings are  
not accidentally erased.  
• Pause will switch to Stop after 5  
minutes to protect theVCR and  
the tape from damage.When a  
recording is paused, review the  
pause time remaining with  
the ■ marks on the screen.  
Each ■ mark equals  
1 minute remaining. During the  
last minute of paused recording,  
the ■ mark will flash.  
To prevent recording, break off the tab with a  
screwdriver.  
1
2
To allow recording, cover the hole with clear tape.  
• If any menu is on the TV screen,  
RECORD I on the remote  
does not function. Press  
Cover the  
hole to allow  
recording.  
Remove the  
tab to prevent  
recording.  
CLEAR/RESET to remove the  
menu.Then, press RECORD I.  
Or, use REC I on the front of  
the DVD/VCR.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 25  
Recording One Channel/Watching Another 25  
STANDBY-ON  
PressVCR, then press RECORD I to record the  
currentTV channel. Details are on page 24.  
1
2
3
4
SEARCH MODE  
DISPLAY  
PressVCR/TV once to put the DVD/VCR inTV  
position. TheVCR light will disappear from the  
DVD/VCR’s display panel.  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
SUBTITLE ZOOM  
SKIP / CH  
RETURN  
TITLE CLEAR/RESET SLOW  
Use theTV remote control to select the channel  
you want to watch at theTV.  
2,5  
1
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
1
6
To return to the channel being recorded, use theTV  
remote control to return to channel 03 or 04 at the  
TV. Details are on page 9. Or, if you connected the  
DVD/VCR to the TV using audio and video cables, return  
to the TV’s correctVideo In channel. Details are on page 12.  
OK  
STOP  
PLAY  
PAUSE  
PressVCR/TV on the DVD/VCR remote control to  
put the DVD/VCR inVCR position. (TheVCR light will  
appear in the DVD/VCR’s display panel again.) The channel  
being recorded will appear on the TV screen.  
TIMER SET  
SPEED  
MARKER  
RECORD  
5
6
1
2
6
0
3
7
4
8
5
9
Press STOP C to stop the recording.  
+10  
Select the channel you  
want to watch at the TV.  
3
4
Reselect channel 03, 04  
orVideo In at the TV.  
Helpful Hint  
• If you use a Cable Box or  
Satellite Receiver, you may not  
be able to watch one channel  
while recording another. See  
pages 10-11 for details.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 26  
26 One-Touch Recording  
One-Touch Recording (OTR) lets you set a timed recording 30  
minutes to 8 hours long of the current TV channel. Before you  
begin:  
● Place the DVD/VCR inVCR mode. PressVCR soVCR light  
appears on the front of the DVD/VCR.  
● Select a recording speed (SP, SLP) with SPEED.  
● Put a videotape in the cassette compartment. Make sure the  
tape’s record tab is intact and the tape is long enough to record  
the program(s).  
STANDBY-ON  
SEARCH MODE  
DISPLAY  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
SUBTITLE ZOOM  
SKIP / CH  
RETURN  
TITLE CLEAR/RESET SLOW  
K
L
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
PressVCR, then press SKIP ∑/CH or SKIP w/CH  
1
or the Number buttons to select the channel you want  
to record.  
1
2
OK  
Press RECORD I repeatedly until the desired  
recording length (30 minutes to 8 hours) appears  
on theTV screen. Recording will begin.“REC” and “  
will appear on the DVD/VCR’s display panel.  
”
STOP  
PLAY  
PAUSE  
TIMER SET  
SPEED  
MARKER  
RECORD  
OTR (0:30)  
1
2
6
0
3
7
2
4
8
5
9
+10  
SP  
When an OTR ends  
The DVD/VCR will turn off and “ ” on the DVD/VCR's display  
panel will flash indicating that the recording is complete, or it may  
switch to DVD mode automatically. Press TIMER SET to use the  
DVD/VCR as usual.  
Helpful Hints  
• The remaining recording time  
will appear on the display panel  
during an OTR. Press DISPLAY  
to see it on theTV screen.  
• To change the recording length  
while an OTR is in progress,  
press RECORD I repeatedly.  
• You cannot pause an OTR.  
• If the preset time for a timer  
recording comes up during an  
OTR, the OTR has priority.The  
timer recording will not take  
place.  
Stopping an OTR  
To stop an OTR before recording is finished, press STOP C on the  
remote control or STOP/EJECT C A (VCR) on the front of the  
DVD/VCR.  
To cancel the OTR but continue recording, press RECORD  
repeatedly until REC appears in the upper left corner of the TV  
screen, and “  
I
”
disappears.  
When an OTR finishes, the DVD/VCR will either switch to DVD  
mode or turn itself off. If it changes to DVD mode, press  
STANDBY-ON y to turn it off.  
After an OTR,“ ” flashes because theVCR is still on standby for  
timer recordings. Press TIMER SET on the remote or  
STOP/EJECT C A (VCR) on the DVD/VCR to cancel timer  
standby and use theVCR normally again.  
• If the end of the tape is reached  
during an OTR, theVCR will  
stop recording, eject the tape,  
and switch to DVD mode or  
turn off.  
• If one or more Timer  
recordings are on standby when  
one OTR ends, the DVD/VCR  
will turn off automatically and  
“
” will appear on the  
DVD/VCR's display panel  
indicating that it is now ready  
for another timer recording.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 27  
Rerecording (Tape Duplication) 27  
These instructions show you how to copy videotapes.The illustration uses two DVD/VCRs. OtherVCRs or  
Camcorders may operate differently.  
1. Audio cables from AUDIO OUT jacks (red and white)  
of DVD/VCR 1 to AUDIO IN jacks of DVD/VCR 2  
DVD  
DVD/VCR VCR  
COMONENT  
DIGITAL  
AUDIO S-VIDE
AUDIO OUT AUDIO IN  
OUT  
OUT  
ANT-IN  
AUDIO OUT  
L
L
L
/
R
R
P
B
COAXIAL  
VIDEO OUT VIDEO IN  
ANT-OUT  
R
C
R
P
R
DVD/VCR 1  
Playing unit  
2.Video cable from yellowVIDEO  
OUT jack of DVD/VCR 1 to  
VIDEO IN jack of DVD/VCR 2  
DVD  
DVD/VCR VCR  
COMPONEN
VIDEO OU
DIGITAL  
AUDIO OUT  
AUDIO S-VIDEO  
UT AUDIO IN  
OUT OUT  
ANT-IN  
Y
L
L
C
B
/
/
R
R
P
B
COAXIAL  
VIDEO OUT VIDEO IN  
ANT-OUT  
R
C
R
P
R
DVD/VCR 2  
Recording unit  
3. RF coaxial cable from the ANT-OUT  
(Antenna Out) jack of DVD/VCR 2  
to theTV’s ANTENNA IN jack  
Make the connections shown above.  
1
2
3
4
5
DVD/VCR 1 will play your tape. Put a prerecorded tape  
into the cassette compartment of DVD/VCR 1.  
PressVCR to put the unit inVCR mode if necessary.  
DVD/VCR 2 will record your tape. Insert a blank tape in  
the cassette compartment of DVD/VCR 2. PressVCR  
to put the unit inVCR mode if necessary.  
Helpful Hints  
• If you use the AUDIO and  
VIDEO IN jacks on the back of  
DVD/VCR 2, press Number  
buttons 0, 0, 1 at step 5. L1 will  
appear on theTV screen.  
• If you use the AUDIO and  
VIDEO IN jacks on the front of  
DVD/VCR 2, press Number  
buttons 0, 0, 2 at step 5. L2 will  
appear on theTV screen.  
• Unauthorized recording of  
copyrighted television programs,  
video tapes or other materials  
may infringe on the rights of  
copyright owners and violate  
copyright laws.  
Turn on theTV and set it to channel 03 or 04 (the  
RF output channel of DVD/VCR 2).To determine the  
DVD/VCR’s output channel, see step 4 on page 9.  
Point the remote control at DVD/VCR 2. Press  
Number buttons 0, 0, 1 or 0, 0, 2. (See Helpful Hints to  
the right.)  
Press SPEED to select SP or SLP at DVD/VCR 2.  
6
7
Press PLAY B (VCR) on the front of DVD/VCR 1  
and REC I on the front of DVD/VCR 2 at the same  
time.  
To stop recording, press STOP/EJECT C A (VCR) on  
DVD/VCR 1, then press STOP/EJECT C A (VCR) on  
DVD/VCR 2.  
• If a program has copyright  
protection, it may not be  
recorded clearly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 28  
28 Timer Recording  
Follow the steps below to program theVCR of the DVD/VCR to  
record TV programs while you’re away from home. Before you begin:  
● Set up the TV channels at the DVD/VCR. Details are on page 21.  
● Set the clock. Details are on page 22.  
STANDBY-ON  
SEARCH MODE  
DISPLAY  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
● Put a tape in the cassette compartment of the DVD/VCR. Make  
sure the tape’s record tab is intact and the tape is long enough  
to record the program(s).  
SUBTITLE ZOOM  
SKIP / CH  
● PressVCR soVCR light appears on the front of the DVD/VCR.  
RETURN  
TITLE CLEAR/RESET SLOW  
Press DISC/VCR MENU so MENU appears.  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
1
Press K or  
L
B
to selectTIMER PROGRAMMING.  
Then, press  
. Program numbers that do not have a timer  
1
2 recording stored will flash.  
OK  
TIMER PROGRAMMING  
2-8  
STOP  
PLAY  
PAUSE  
PROG. 12345678  
DATE  
STARTTIME  
ENDTIME  
CHANNEL  
REC SPEED  
TIMER SET  
SPEED  
MARKER  
RECORD  
1
2
6
0
3
7
4
8
5
9
+10  
Press K or L to select an empty program.  
Then, press B.  
3
PROGRAM NUMBER  
1
DATE  
– – / – –  
STARTTIME  
END TIME  
CHANNEL  
REC SPEED  
– – : – – – –  
– – : – – – –  
– –  
Helpful Hints  
• You cannot access the TIMER  
PROGRAMMING menu at step  
2 if the clock is not set.The  
CLOCK SET menu will appear.  
Follow the steps on page 22 to  
set the clock.  
• Only programs that will air  
Monday-Friday can be recorded  
on a DAILY basis. If you select  
DAILY at step 4, then enter a  
Saturday or Sunday DATE at step  
5, the correct program will not  
be recorded.TheVCR will alter  
the recording date and record a  
different program than the one  
you intended.  
• If you are recording from other  
equipment, set CHANNEL to L1  
or L2 at step 8. If you connected  
the other equipment to the  
AUDIO andVIDEO In jacks on  
the front of the DVD/VCR,  
choose L2. If you connected the  
equipment to the AUDIO IN and  
VIDEO IN jacks on the back of  
the DVD/VCR, choose L1.  
– –  
Press K or L to select ONCE, DAILY orWEEKLY.  
Then, press B.  
4
● ONCE -TheVCR will record aTV program on any day you  
choose, up to 12 months away.  
● DAILY - TheVCR will record aTV program at the same time  
on the same channel every day, Monday through Friday.  
●
WEEKLY -TheVCR will record aTV program at the same time  
on the same channel every week, for example, every Monday.  
To enter the recording date, press K or L until the  
month appears.Then, press B.  
5 Next, press  
K or L until the day appears.Then,  
press B. The day of the week will appear. You cannot  
record more than one year in advance.  
To enter the recording’s start time, press K or L until the  
hour appears. Press B. Press K or L until the minute  
6 appears. Press  
B.Finally, press K or L to point to AM  
or PM. AM or PM will flash beside the start time. Press B.  
Repeat the procedure in step 6 to set the  
recording’s end time.  
7
Press K or L until the channel number appears.  
Then, press B.  
● If you are using a standard antenna/Cable TV hookup (as  
shown on page 9), select the channel of the TV program  
you want to record.  
8
• Enter the information while the  
space is flashing.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 29  
Timer Recording (cont’d) 29  
● If you are recording from other equipment, select L1 or  
L2.To determine L1 or L2, refer to the Helpful Hints.  
STANDBY-ON  
● If you are using a Cable Box/Satellite Receiver, select the  
Cable Box/Satellite Receiver output channel (03 or 04).  
Then, at the Cable Box/Satellite Receiver, select the  
channel you want to record. Leave the Cable  
Box/Satellite Receiver on for the timer recording.  
Details are on page 10.  
SEARCH MODE  
DISPLAY  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
SUBTITLE ZOOM  
SKIP / CH  
RETURN  
TITLE CLEAR/RESET SLOW  
Press K or L to select a recording tape speed. The arrow  
will appear beside your choice.The selected speed will flash  
9 beside REC SPEED. Details about tape speed are on page 60.  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
10  
9
ONETIME PROGRAM  
PROGRAM NUMBER  
1
OK  
DATE  
0 5 / 0 3 WED  
STARTTIME  
END TIME  
CHANNEL  
REC SPEED  
0 7 : 3 0 P M  
0 8 : 3 0 P M  
16  
STOP  
PLAY  
PAUSE  
S P  
SP  
B
SLP  
TIMER SET  
SPEED  
MARKER  
RECORD  
11  
1
2
6
0
3
7
Press CLEAR/RESET to store the timer recording.  
4
8
5
9
10  
+10  
PressTIMER SET. The DVD/VCR will turn off and “ ” will  
appear in the display panel. In some cases, the DVD/VCR will  
11 switch to DVD mode instead.You may use the DVD player  
during a timer recording.  
If you want to use theVCR until time for the recording, don’t  
press TIMER SET until a few minutes before the recording  
should start. Or, press TIMER SET only when you know you  
won’t be using theVCR anymore (until after the recording).  
When “ ” appears, you cannot put the DVD/VCR inVCR  
mode by pressingVCR or SOURCE.You must first press TIMER  
SET to cancel the timer recording temporarily.Then, you can  
use theVCR features again.  
Helpful Hints  
•
To stop a started timer recording,  
press STOP/EJECT C A (VCR) on  
the front of the DVD/VCR. (You  
cannot stop a started timer  
recording with STOP C on the  
remote.) More Helpful Hints are  
on page 62.  
• To change incorrect information,  
press s or B to choose the  
item you want to change. Press  
K or L to adjust the  
When a timer recording ends  
The DVD/VCR will turn off and “ ” on the DVD/VCR's display panel  
will flash indicating that the recording is complete. Or it may switch to  
DVD mode automatically. Press TIMER SETto use the DVD/VCR as usual.  
information.  
• While a timer recording is set  
and “ ” is on, pressing  
CancellingTimer Recordings  
STOP/EJECT C A (VCR) will  
turn on the DVD/VCR and/or  
cancel the timer recording.The  
PressVCR, then press DISC/VCR MENU so MENU  
appears.  
“
” will disappear. Press  
1
STOP/EJECT C A (VCR) again to  
remove the tape. Insert a tape  
and pressTIMER SET to reset  
the timer recording.  
Press K or L to select TIMER PROGRAMMING,  
then press B.  
2
• If there is no tape in theVCR  
when you pressTIMER SET,  
Press K or L to find the program you want to  
cancel.  
3
“
” will flash. Insert a tape.  
• If one or moreTimer recordings  
are on standby when one timer  
recording ends, the DVD/VCR  
will turn off automatically and  
While the program number is flashing, press s to  
clear all the information for that program.  
4
Press CLEAR/RESET to remove the menu.  
“
” will appear on the  
DVD/VCR's display panel  
5
indicating that it is now ready for  
another timer recording.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 30  
30 DVD to Videotape Duplication  
Follow the steps below to copy a DVD to a videotape. This will  
be possible only if the DVD is not copy protected.  
Before you begin:  
STANDBY-ON  
SEARCH MODE  
DISPLAY  
● Put a videotape in the cassette compartment. Make sure the  
tape’s record tab is intact and the tape is long enough to record  
the DVD.  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
SUBTITLE ZOOM  
SKIP / CH  
● Put the DVD you want to copy in the disc tray.  
● PressVCR soVCR light appears on the front of the DVD/VCR.  
RETURN  
TITLE CLEAR/RESET SLOW  
●
Turn on the TV and set it to channel 3, 4 or itsVideo Input.  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
5,6  
4
5
Point the remote control at the DVD/VCR. Press Number  
buttons 0, 0, 3. “DISC” will appear on the TV screen.  
OK  
1
DISC  
STOP  
PLAY  
PAUSE  
TIMER SET  
SPEED  
MARKER  
RECORD  
6
2
1
1
2
6
0
3
7
4
8
5
9
+10  
Press SPEED until the desired tape speed (SP or  
SLP) appears briefly on the screen. Details about tape  
speed are on page 60.  
2
Press RECORD  
I
to start recording. “REC” will appear  
3,5  
on the display panel.  
3
4
5
Press DVD. Press PLAY  
B
to play the disc.  
To pause the recording, pressVCR, then press  
PAUSE  
k
once. “REC” will flash. To resume recording,  
press RECORD  
reappear.  
I
or press PAUSE  
k
again. “REC” will  
To stop recording, pressVCR, then press STOP  
C.  
6
Helpful Hints  
• A timer recording is not  
possible during DVD to  
videotape duplication.  
• You cannot copy a DVD to a  
videotape if you are using  
Progressive Scan. Details are on  
page 14.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 31  
Repeat Playback 31  
Follow the steps below to play a videotape repeatedly.  
REPEAT REPEAT  
A-B  
AUDIO  
PressVCR, then press DISC/VCR MENU so MENU  
appears.  
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
1
RETURN  
TITLE CLEAR/RESET SLOW  
Press K or L to select AUTO REPEAT.  
2
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
Press B so ON appears next to AUTO REPEAT. Tape  
1
2-3  
playback will begin immediately.AUTO REPEAT B will appear on  
3
the TV screen briefly. (If you are fast forwarding or rewinding the  
OK  
tape, press CLEAR/RESET to remove the menu, then press PLAY  
B to begin tape playback.) The tape will play to the end, rewind,  
then play again. (TV programming will appear on the screen while  
the tape is rewinding.)  
STOP  
PLAY  
PAUSE  
- M E N U -  
TIMER PROGRAMMING  
Helpful Hint  
B AUTO REPEAT  
CHANNEL SET UP  
CLOCK SET  
[ON]  
[ON]  
• To cancel Auto Repeat, follow  
LANGUAGE SELECT  
AUDIO OUT  
TV STEREO  
steps 1-2. At step 3, press  
B
so OFF appears beside AUTO  
REPEAT. Press CLEAR/RESET.  
SAP  
Tape Counter  
Follow the steps below to reset theVCR’s real-time tape counter  
to 0 at a tape location you want to refer to later.  
STANDBY-ON  
PressVCR, then play, fast forward or rewind a tape  
to the location that you would like to refer to later.  
2,4  
3
SEARCH MODE  
DISPLAY  
AUDIO  
1 Press STOP  
C to stop the tape.  
REPEAT REPEAT  
A-B  
Press DISPLAY to see the status display.  
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
2
STOP  
RETURN  
TITLE CLEAR/RESET SLOW  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
1
4
SLP  
1 : 23 : 45 HIFI  
OK  
While the counter is on the screen, press  
CLEAR/RESET to reset the counter to 0.  
STOP  
PLAY  
PAUSE  
3
1
TIMER SET  
SPEED  
MARKER  
RECORD  
STOP  
Helpful Hints  
• You may only set the counter to  
0 at one location at a time.  
Setting the counter to zero at a  
second location will erase the  
previous 0 setting.  
• If you remove the tape, the  
counter will reset to 0 at the  
point at which you last stopped  
playback whenever you reinsert  
the tape.  
SLP  
0 : 00 : 00 HIFI  
When you later want to return to this point on the  
tape, press DISPLAY so you can see the counter  
4 (while tape playback is stopped). Press  
h or g.  
As the tape rewinds or forwards, watch the counter.When  
it reaches 0, press PLAY B to play the tape.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 32  
32 Time Search, Index Search  
Time Search  
Follow the steps below to search forward or backward on a tape  
a specific length of time.There must be a tape in the cassette  
compartment.  
STANDBY-ON  
SEARCH MODE  
DISPLAY  
PressVCR, then press SEARCH until theTIME  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
SEARCH screen appears.  
1
1
SUBTITLE ZOOM  
SKIP / CH  
TIME SEARCH  
- : - -  
RETURN  
TITLE CLEAR/RESET SLOW  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
OK  
2-3  
Within 30 seconds, press K or L until your desired  
length of time appears. Or, press and hold K or L until  
STOP  
PLAY  
PAUSE  
2
you reach the desired length of time.  
You can set aTime Search for up to 9 hours and 59 minutes  
(9:59).  
TIMER SET  
MARKER  
RECORD  
Within 30 seconds, press s (for a reverse search) or  
(for a forward search). TheVCR begins rewinding or fast  
B
3
forwarding the tape.When the tape finishes rewinding or fast  
forwarding the time you specified, playback will begin.  
The time will count down beneathTIME SEARCH during the  
search.  
If the end of the tape is reached during the search, the search  
will stop and the tape may rewind. Details are on page 33.  
Index Search  
STANDBY-ON  
An Index Mark is made automatically at the beginning of each  
recording. Essentially, an Index Mark is a “bookmark.” Find the start  
of a recording by following these steps.  
SEARCH MODE  
DISPLAY  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
1
PressVCR, then press SEARCH until the INDEX  
SUBTITLE ZOOM  
SKIP / CH  
SEARCH screen appears.  
1
RETURN  
TITLE CLEAR/RESET SLOW  
INDEX SEARCH  
– –  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
OK  
2-3  
STOP  
PLAY  
PAUSE  
Within 30 seconds, press K or L until the number of  
programs you want to skip appears beneath INDEX  
TIMER SET  
MARKER  
RECORD  
2
3
SEARCH. Include the current program in your number.  
Within 30 seconds, press s (for a reverse search) or  
B
(for a forward search). When the tape finishes rewinding or  
forwarding, playback will start.The program numbers will  
count down beneath INDEX SEARCH during the search.  
If the end of the tape is reached during the search, the search  
will stop and the tape may rewind. Details are on page 33.  
Recordings should be at least 1 minute long in SP speed, 2  
minutes in LP, and 3 minutes in SLP. Otherwise, the Index  
Mark will not be available. Details on tape recording speeds are  
on page 60.  
Helpful Hints  
• Time Search and Index Search  
are not available during  
recording.  
• To remove a Search display, press  
CLEAR/RESET.  
• To cancel a search, press  
STOP C .  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 33  
Special Effects Playback 33  
●
Before you begin, pressVCR soVCR light appears on the front of the  
REPEAT REPEAT  
AUDIO  
DVD/VCR.  
A-B  
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
Forward and Reverse Searching (SP/LP/SLP) /  
Super High Speed Searching (LP/SLP)  
RETURN  
TITLE CLEAR/RESET SLOW  
During tape playback, press and release g or h.  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
A fast forward or reverse picture search will begin.  
1 Press  
g or h, then press again. The search speed  
will increase. Repeatedly pressing g or h will switch  
between regular and high speed searching.  
OK  
To return to normal playback, press PLAY B.  
2
STOP  
PLAY  
PAUSE  
Viewing a Still Picture  
TIMER SET  
SPEED  
MARKER  
RECORD  
During tape playback, press PAUSE k. A still picture  
will appear on the screen.  
1
To advance the still picture one frame at a time,  
press PAUSE k repeatedly.  
Helpful Hints  
2
• Slow and Still modes will switch  
to Stop mode after 5 minutes  
to protect the DVD/VCR and  
the tape from damage.  
SP/LP/SLP means this feature will  
work with tapes recorded in  
Standard Playback, Long Playback or  
Super Long Playback. LP/SLP means  
this feature will work with tapes  
recorded in Long Playback or Super  
Long Playback.Tape speed details  
are on page 60.  
To release the still picture and return to playback,  
press PLAY B.  
3
•
Viewing a Slow Motion Picture  
During tape playback, press SLOW. The tape will play  
in slow motion.  
1
To return to normal playback, press PLAY B.  
2
Automatic Operation Features  
The following tape features are available inVCR mode. PressVCR soVCR light appears on the front of the DVD/VCR, if  
necessary.  
Automatic Playback  
When you put a tape in the DVD/VCR, the power will come on. If the tape’s record tab is missing, playback will begin.  
If a timer recording is set and “ ” is flashing in the display panel, the power will not come on automatically when  
you insert a tape with the record tab intact.  
If a timer recording is set and “ ” is flashing in the display panel, the DVD/VCR will eject the tape if the record  
tab is missing.  
Automatic Rewind, Eject  
When a tape is played, fast forwarded or recorded to its end, the tape will rewind to the beginning, stop and eject  
itself.This feature does not operate if AUTO REPEAT is ON. Details are on page 31.  
Tape Eject  
A tape can be ejected with the DVD/VCR power on or off (but the DVD/VCR must be plugged in).  
If a timer recording is set and “ ” appears on the display panel, pressing STOP/EJECT C A (VCR) will turn on  
the DVD/VCR and/or cancel the timer recording. Press STOP/EJECT C A (VCR) again to remove the tape.  
Remember to insert a tape and press TIMER SET to reset the timer recording.  
AutomaticTracking Adjustment  
TheVCR adjusts tracking automatically to give you the best possible picture quality.With some recordings, however,  
you may get a better picture using manual tracking.  
ManualTracking  
To manually adjust the tracking during normal playback and slow motion playback of a videotape, press  
K
L
SKIP ∑/CH or SKIP w/CH on the remote.Tracking will return to Automatic Tracking when you press STOP  
K
L
C or insert a tape.You can also press SKIP ∑/CH or SKIP w/CH to remove vertical jitter in a Still picture.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN1 3/2/06 6:56 PM Page 34  
34 Multi-ChannelTelevision Sound / Hi-Fi Stereo  
Your DVD/VCR can play tapes recorded in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound from  
the left and right audio channels.Your DVD/VCR also can play tapes recorded in a second audio (usually, that  
means your program is recorded in a second language). Of course, your DVD/VCR will play tapes recorded in  
monaural (single-source) sound as well.Your DVD/VCR also will record on a video cassette in Hi-Fi stereo or in  
second audio, so when you play that tape on the DVD/VCR, it will be in stereo or second audio. Read the  
directions on this page to familiarize yourself with the stereo and second audio setups.Then follow the directions  
below to record in stereo or second audio, or to play tapes recorded in Hi-Fi stereo.  
Understanding Displays  
When you watch TV channels through the DVD/VCR, portions of the display shown below will appear when you  
press DISPLAY twice.  
If SAP or STEREO appears, the program is available in second audio or stereo.  
STOP  
SLP  
5:40 PM  
CH 02  
STEREO  
SAP  
Even though a program is available in second audio or stereo, you must  
program the DVD/VCR to receive or record the program. Follow the directions  
below.This display is not available during tape playback.  
To play programs in stereo, connect the DVD/VCR to a Stereo or TV as  
described on pages 12-13.You will use the red and white AUDIO OUT jacks  
on the DVD/VCR.  
Multi-ChannelTelevision Sound  
To set the DVD/VCR to receive programs in stereo or  
second audio, follow these steps.  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
1,3-4  
PressVCR, then press DISC/VCR MENU so MENU  
appears.  
1
OK  
Press K or L to selectTV STEREO or SAP (Second Audio  
Program). Press B so ON appears beside your selection.  
2
2
3
STOP  
PLAY  
PAUSE  
Press DISC/VCR MENU to remove the menu.  
Helpful Hints  
You can only receive and record in  
•
stereo or second audio programs that  
are broadcast in stereo or second  
audio.You can only play a tape in  
Stereo or second audio if it was  
recorded in stereo or second audio.  
Please see above to determine if the  
program is in stereo or second audio.  
If SAP is ON but the program is not  
broadcast in Second Audio, you will  
hear and record the program in  
normal audio.  
Hi-Fi Stereo  
Multi-Channel Television Sound system broadcasts are recorded in  
Hi-Fi stereo.To play in Hi-Fi stereo the tapes recorded in Hi-Fi  
stereo, follow these steps.  
PressVCR, then press DISC/VCR MENU so  
MENU appears.  
•
1
Press K or L to select AUDIO OUT.  
Then, press B.  
2
•
•
Programs are recorded in both Hi-Fi  
stereo sound and in monaural (single-  
channel) sound.  
Press K or L to select HIFI. ON will appear beside HIFI.  
The audio level of a tape recorded in  
Hi-Fi stereo will differ from the audio  
level of a tape not recorded in Hi-Fi  
stereo.  
3
AUDIO OUT  
B HIFI  
MONO  
[ON]  
•
•
You can change to MONO if you want  
monaural audio playback. Follow steps  
1-2, then press K or L to select  
MONO at step 3. Press DISC/VCR  
MENU. HIFI will disappear from the  
status display.  
If you play non-Hi-Fi tapes while  
AUDIO OUT is set to HIFI, HIFI will  
not appear on the status display.The  
tape will play in monaural sound.  
Please see additional notes on page  
63.  
Press DISC/VCR MENU to remove the menu.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 35  
Menus, Playback Control (PBC) Function 35  
DVD Disc Menus  
STANDBY-ON  
Some DVDs contain menus that describe the contents of the disc  
or allow you to customize disc playback. For example, the menu  
may offer choices for subtitle languages, director’s commentary or  
Sound track playback.To use the DVD menu and select playback  
features, follow these steps.  
SEARCH MODE  
DISPLAY  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
SUBTITLE ZOOM  
SKIP / CH  
RETURN  
TITLE CLEAR/RESET SLOW  
Press DVD to put the DVD/VCR in DVD mode.  
DVD light will appear on the front of the DVD/VCR.  
1
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
1
Press DISC/VCR MENU. The DVD’s main disc menu  
will appear.  
2
3
2
OK  
Press K, L, s or B to select an item, then press OK.  
Continue this process to set up all the features you want.  
3
STOP  
PLAY  
PAUSE  
Using theTitle Menu  
Some DVDs have a title menu, which lists the titles available on  
the DVD. Use the title menu to play a specific title.  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
SUBTITLE ZOOM  
SKIP / CH  
Press DVD to put the DVD/VCR in DVD mode.  
DVD light will appear on the front of the DVD/VCR.  
RETURN  
TITLE CLEAR/RESET SLOW  
1
2
1
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
PressTITLE. The title menu will appear.  
If a title menu is not available, the “X” may appear on the  
2
TV screen. Or, if the DVD only has a main disc menu as  
described above, it may appear when you press TITLE.  
OK  
3
Press K, L, s or B to select a title, then press OK.  
Playback will begin at the title you selected.  
STOP  
PLAY  
PAUSE  
3
Playback Control (PBC) Function  
When playing aVideo CD with PBC (Playback Control), you  
can use interactive menu (e.g., playlists) on the TV screen.  
Refer to instructions accompanying yourVideo CD for more  
details on PBC.  
STOP  
PLAY  
PAUSE  
TIMER SET  
SPEED  
MARKER  
RECORD  
2
1
Some operations cannot be performed unless the PBC  
function is cancelled temporarily.  
1
2
6
0
3
7
4
8
5
9
Cancelling and calling back the PBC function  
+10  
While playback is stopped, press the Number  
Buttons to enter a track number.  
1
Helpful Hints  
PBC function is now cancelled and the playback of the  
Video CD will start.  
• Menus vary among discs. Follow  
the literature accompanying the  
disc for details.  
• Not all DVDs have disc or title  
menus.  
• Some DVDs may refer to  
chapters as “scenes.” Some  
DVDs may refer to the title  
menu as the “scene index.”  
• TITLE will not be active with all  
DVDs.  
To call back the PBC function, press STOP  
twice, then press PLAY B.  
The title menu will appear on the TV screen.  
C
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 36  
36 Fast Forward/Reverse Search  
Press DVD to put the DVD/VCR in DVD mode.  
DVD light will appear on the front of the DVD/VCR.  
STANDBY-ON  
1
SEARCH MODE  
DISPLAY  
During playback, press SEARCH g or h on the  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
remote control.  
2
●
During DVD playback, pressing SEARCH g or h will  
forward or reverse the picture at approximately 2, 8, 20, 50 or  
100 times the normal speed.The speed may vary depending  
SUBTITLE ZOOM  
SKIP / CH  
RETURN  
TITLE CLEAR/RESET SLOW  
on the disc.  
appear briefly on the TV screen to indicate forward  
searching. Or, 1, 2, 3, 4 or 5 will  
indicate reverse searching.  
For DVD playback, the sound will be mute during the search.  
g
1,  
g
2,  
g
3,  
g
4 or  
g
5 will  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
h
h
h
h
h
1
3
OK  
TM  
● ForVideo CDs,Audio CDs, MP3 or Windows Media  
Audio playback, pressing SEARCH g or h will  
forward or reverse the picture or sound at  
2
STOP  
PLAY  
PAUSE  
approximately 2, 8 or 30 times the normal speed.The  
speed may vary depending on the disc.  
TIMER SET  
SPEED  
MARKER  
RECORD  
g 1, g 2 or g 3 will appear briefly on the TV  
screen to indicate forward searching. Or, h 1, h 2  
or h 3 will indicate reverse searching.  
1
2
6
0
3
7
4
8
5
9
TM  
For Audio CD, MP3 or Windows Media Audio  
+10  
playback, the sound will be intermittent during the  
search.  
E
1
Example: Playing a DVD in  
reverse at twice the normal  
playing speed.  
Press PLAY B to return to normal playback.  
Helpful Hint  
3
• If you use SEARCH g or  
during Dual Playback, JPEG  
playback will be paused.  
h
x1.3 and x0.8 Rapid Play with Voice  
Rapid Play withVoice is available only during playback on the  
Helpful Hint  
• During Rapid Play withVoice;  
- Audio Language setting, Black  
Level setting andVirtual  
Surround setting cannot be  
changed.  
- Virtual Surround does not  
function.  
- the PCM sound will be output  
if using the digital audio  
connection (COAXIAL).  
- depending on the scenes you  
are playing, Rapid Play with  
Voice may be unavailable.  
discs recorded in the Dolby Digital format. Rapid Play with  
Voice plays back in slightly faster/slower speed while keeping  
the sound quality as in the normal playback.  
During playback, press MODE.  
The current setting appears.  
1
2
Press OK to switch among  
(x1.3), (x0.8) and  
OFF.  
: Plays back approximately at 1.3 times of normal playback.  
: Plays back approximately at 0.8 times of normal playback.  
OFF : No effects.  
To resume normal playback, press PLAY B.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 37  
Title/Chapter Playback,Time Playback 37  
Title/Chapter Playback  
SEARCH MODE  
DISPLAY  
Press DVD to put the DVD/VCR in DVD mode.  
REPEAT REPEAT  
A-B  
AUDIO  
2
DVD light will appear on the front of the DVD/VCR.  
1
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
During DVD playback, press SEARCH until CH (for  
RETURN  
TITLE CLEAR/RESET SLOW  
chapter) or TT (for title) appears on the TV.The number of  
2
3
available titles or chapters will appear at the right ( /4, for  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
example).  
1
1
Enter the title or chapter number using the  
Number buttons. The title or chapter will play.  
OK  
● To select a single-digit track number when there are  
more than 10 tracks, press OK to play the track.  
● If you enter a track number that is not available on the  
Disc, playback will not begin (or the current track will  
continue to play).  
STOP  
PLAY  
PAUSE  
TIMER SET  
SPEED  
MARKER  
RECORD  
12/17  
4 / 4  
1
2
6
0
3
7
4
8
5
9
3
2
+10  
SEARCH MODE  
DISPLAY  
AUDIO  
Time Playback  
REPEAT REPEAT  
A-B  
Press DVD to put the DVD/VCR in DVD mode.  
DVD light will appear on the front of the DVD/VCR.  
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
1
2
RETURN  
TITLE CLEAR/RESET SLOW  
During DVD, Video CD (without PBC) or Audio CD  
playback, press SEARCH until the Time Search display  
appears.  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
_:_ _:_ _  
TOTAL 1:29:00  
OK  
STOP  
PLAY  
PAUSE  
TIMER SET  
SPEED  
MARKER  
RECORD  
1
2
6
0
3
7
Within 30 seconds, use the Number buttons to  
enter the elapsed playing time (of the track or title)  
at which you want playback to begin. Enter the time  
in hours, minutes and seconds.Within a few seconds, play-  
back will start at the specified time.  
● Example: 1 hour, 23 minutes and 30 seconds  
1 → 2 → 3 → 3 → 0  
● Make sure the time you enter is within the total time of  
the current title or track. If it is not, the time space will  
clear and playback will continue at its current point.The  
total time available in the current track or title will  
appear in the Time Search display.  
● If you make a mistake entering the time, press  
CLEAR/RESET to clear the time area. Enter the correct  
information.  
4
8
5
9
3
3
+10  
Helpful Hints  
• When playback is stopped, use  
the Number buttons to select a  
title for immediate playback.  
During playback, use the  
Number buttons to choose a  
chapter for immediate playback.  
• Title/chapter playback is not  
available with some DVDs.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 38  
38 Track Playback  
There are three ways to play a specificVideo CD (without PBC),  
STANDBY-ON  
TM  
Audio CD, MP3,Windows Media Audio or JPEG track: Use the  
Number buttons, the SEARCH button or SKIP ∑/CH K and  
SEARCH MODE  
DISPLAY  
SKIP w/CH L.  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
● Before you begin, press DVD so DVD light appears on the front of  
the DVD/VCR.  
B
SUBTITLE ZOOM  
SKIP / CH  
C
RETURN  
TITLE CLEAR/RESET SLOW  
A
Using the Number Buttons  
Press the Number buttons to enter a track number.  
Playback will start at the selected track.  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
For tracks 10 and above, press the +10 button so the Search display  
(TR _ _ /12 - an example of total tracks) appears on the TV. Press the  
Number button of the first digit, then press the Number but-  
ton of the second digit. For example, to play track 26, press  
+10, then Number 2, then Number 6 (Each number must be  
OK  
STOP  
PLAY  
PAUSE  
A,B  
TIMER SET  
SPEED  
MARKER  
RECORD  
pressed within 30 seconds of the previous number).  
For single-digit tracks (1-9), press a single Number button.  
If you enter a track number that is not available on the disc, play will not  
begin (or the current track will continue to play).  
1
2
6
0
3
7
4
8
5
9
+10  
B
Using SEARCH  
Press SEARCH so the track search display (TR) appears.  
Within 30 seconds, press the Number buttons to select the  
track number. Playback will begin at the selected track. For a  
single-digit track (1-9), enter 0 first. For example, to play track 5,  
press 0, 5. You do not have to use the +10 button in Search Mode.  
C
K
L
K
∑
w
Using SKIP /CH or SKIP /CH  
∑
During playback, press SKIP /CH to skip the current  
track and move to the next track. The track number will  
appear briefly on the DVD/VCR display panel.  
L
w
Or, during playback, press SKIP /CH to return to the  
L
w
beginning of the current track. Press SKIP /CH  
repeatedly to go to previous tracks. The track number will  
appear briefly on the DVD/VCR display panel.  
Helpful Hints  
K
• SKIP 3/CH and  
L
SKIP  
3 /CH does not  
function when playback is  
stopped.  
K
• You cannot use SKIP 3/CH  
to go from the last track on the  
disc to the first track.  
K
• Using SKIP 3/CH or  
L
SKIP  
3 /CH will only affect  
MP3 files during Dual Playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 39  
Paused and Step-by-Step Playback, Resume On 39  
Paused and Step-by-Step Playback  
STANDBY-ON  
Press DVD to put the DVD/VCR in DVD mode.  
SEARCH MODE  
DISPLAY  
DVD light will appear on the front of the DVD/VCR.  
1
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
During disc playback, press PAUSE k. Playback will  
pause and the sound will be mute.  
● Pressing PAUSE F once during Dual Playback will pause a  
JPEG file only. Pressing PAUSE F one more time will  
pause an MP3 playback.  
SUBTITLE ZOOM  
SKIP / CH  
2
RETURN  
TITLE CLEAR/RESET SLOW  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
1
When playing a DVD orVideo CD, press PAUSE  
k
repeatedly to see the picture advance one frame  
(or step) at a time. The sound will remain mute.  
Pressing PAUSE k repeatedly during Audio CD, MP3,  
3
4
OK  
TM  
Windows Media Audio or JPEG playback will have no  
STOP  
PLAY  
PAUSE  
effect.  
TIMER SET  
SPEED  
MARKER  
RECORD  
2-3  
4
2
Press PLAY B to resume play.  
1
2
6
0
3
7
4
8
5
9
+10  
Resume On  
Press DVD to put the DVD/VCR in DVD mode.  
DVD light will appear on the front of the DVD/VCR.  
STANDBY-ON  
1
2
SEARCH MODE  
DISPLAY  
Press STOP C during playback. In a few seconds, the  
following Resume message will appear on the TV screen.  
For MP3,  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
SUBTITLE ZOOM  
SKIP / CH  
TM  
Windows Media Audio  
or JPEG:  
For DVD, VideoCD or AudioCD:  
RETURN  
TITLE CLEAR/RESET SLOW  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
Press 'PLAY' to play from the  
1
3
beginning of current track.  
To play the beginning,  
press 'STOP' first and then 'PLAY'.  
OK  
Press PLAY B. In a few seconds, playback will resume  
from the point at which it stopped last.You can resume  
playing at the same point even if you turn off the  
STOP  
PLAY  
PAUSE  
3
TIMER SET  
SPEED  
MARKER  
RECORD  
DVD/VCR, then turn it on again later. However, opening the  
disc tray will cancel the Resume feature. Playback will start  
at the beginning the next time you insert the disc.  
1
2
6
0
3
7
TM  
4
8
5
9
For MP3,Windows Media Audio and JPEG playback will  
resume from the beginning of the current track.  
+10  
To cancel Resume and start playing the disc from the  
beginning, press STOP C again while playback is stopped.The  
Stop symbol (C) will appear briefly on theTV screen. Press  
PLAY B to start playing the disc from the beginning.  
TM  
● For MP3,Windows Media Audio and JPEG tracks,  
Helpful Hint  
playback will resume from the beginning of the current  
track.  
● To resume playback of aVideo CD with PBC function,  
you have to cancel the PBC function first. See page 35 on  
how to cancel the PBC function.  
• Set STILL MODE to FIELD in  
the DISPLAY menu if paused  
images are blurry. Details are on  
pages 53-54.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 40  
40 Repeat,A-B Repeat  
Repeat  
SEARCH MODE  
DISPLAY  
AUDIO  
REPEAT REPEAT  
A-B  
Press DVD to put the DVD/VCR in DVD mode.  
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
2
DVD light will appear on the front of the DVD/VCR.  
1
2
RETURN  
TITLE CLEAR/RESET SLOW  
During DVD,Video CD (without PBC), Audio CD, MP3,  
TM  
Windows Media Audio or JPEG playback, press REPEAT  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
until the repeat mode you want appears on the TV.  
1
On a DVD, select CHAPTER,TITLE or OFF. On a Video CD  
(without PBC) and Audio CD, select TRACK,ALL (all tracks on  
the disc) or OFF.  
OK  
TM  
With MP3,Windows Media Audio or JPEG tracks, select  
TRACK, GROUP (all tracks in the current folder),ALL or OFF.  
Selecting a new track, chapter or title will cancel repeat playback.  
STOP  
PLAY  
PAUSE  
SEARCH MODE  
DISPLAY  
AUDIO  
REPEAT REPEAT  
A-B  
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
Example: Repeat a  
DVD chapter  
Example: Repeat a  
Video CD or Audio CD track  
RETURN  
TITLE CLEAR/RESET SLOW  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
A-B Repeat  
1
2
You can play a section of a DVD, Video CD or Audio CD  
repeatedly. Follow these steps to set up the section you want to  
repeat.  
3-5  
OK  
Press DVD to put the DVD/VCR in DVD mode.  
DVD light will appear on the front of the DVD/VCR.  
STOP  
PLAY  
PAUSE  
1
TIMER SET  
MARKER  
RECORD  
Press PLAY B to play the disc to the point at which  
you want repeated playback to begin.  
2
Helpful Hints  
Press A-B REPEAT to set the starting point (A).  
If you make a mistake, press CLEAR.This will erase point A  
and let you start over.  
TV screen.  
• Repeat playback and A-B Repeat  
are not available with some discs.  
• The entire A-B Repeat section  
must be within a single title or  
track. If you do not enter Point B  
before the end of the track or  
title is reached, the end of the  
track or title will become Point B  
automatically.  
3
OFF will appear briefly on the  
A –  
• Point B must be later on the  
disc than Point A.  
Play the disc to the point at which you want  
repeated playback to end, then press A-B REPEAT  
again. Within a few seconds, the section will begin to play.  
The segment will play over and over until you cancel the A-  
B Repeat feature.  
4
5
• A-B Repeat is not available with  
TM  
MP3,Windows Media Audio  
and JPEG files.  
• If you choose GROUP Repeat  
during Dual Playback, all tracks  
or files in each folder will play  
repeatedly. For example if you  
choose GROUP Repeat during  
Dual Playback of MP3 folder A  
and JPEG folder B, all MP3 files  
in folder A and all JPEG files in  
folder B will be repeated.  
A – B  
To cancel A-B Repeat, press A-B REPEAT.  
appear on the TV screen. Regular playback will resume.  
OFF will  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 41  
Markers 41  
Use Markers to remember your favorite places on a DVD, Video  
CD (without PBC) or Audio CD.  
STANDBY-ON  
● Before you begin, place the DVD/VCR in DVD mode. Press  
DVD so DVD light appears on the front of the DVD/VCR.  
SEARCH MODE  
DISPLAY  
AUDIO  
REPEAT REPEAT  
A-B  
Play the disc to within 30 seconds of the point at  
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
which you want to set the Marker. Press MARKER.  
The Markers will appear at the top of the TV screen.  
1
RETURN  
TITLE CLEAR/RESET SLOW  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
OK  
2,4  
Example: DVD  
3-4  
1,4  
STOP  
PLAY  
PAUSE  
Within 30 seconds, press s or B to select a Marker  
(1-10). Make sure _ _ :_ _ :_ _ appears beneath the number.  
TIMER SET  
SPEED  
MARKER  
RECORD  
2
3
1
2
6
0
3
7
4
8
5
9
When the playback reaches the point you want to  
remember, press OK. The title or track number and its  
elapsed playing time will appear beneath the Markers.  
A checkmark will replace the Marker number.The Marker  
display will disappear in about 30 seconds, or press  
MARKER again to remove it.  
+10  
Example: DVD  
Example: Video CD  
or Audio CD  
To return to a Marker during playback, press  
MARKER.  
Press s or B to choose the Marker you want, then  
press OK. Disc playback will continue from the marked  
point.  
4
Helpful Hints  
• Opening the disc tray or turning  
off the DVD/VCR will erase all  
the Markers.  
• To erase a single Marker, press  
MARKER. Press s or B to  
select a Marker. Press  
CLEAR/RESET. Press RETURN  
or MARKER to remove the  
display.  
• To erase all the Markers, press  
MARKER until you see the  
Markers. Press B to select AC,  
then press OK. Press MARKER  
or RETURN to remove the  
display.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 42  
42 Subtitles, Camera Angles  
Subtitles  
STANDBY-ON  
The DVD/VCR allows you to select a language for subtitles during  
playback.You may select only languages that are available on the  
DVD.  
SEARCH MODE  
DISPLAY  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
Press DVD to put the DVD/VCR in DVD mode.  
DVD light will appear on the front of the DVD/VCR.  
SUBTITLE ZOOM  
SKIP / CH  
1
2
RETURN  
TITLE CLEAR/RESET SLOW  
2
During playback, press SUBTITLE repeatedly to  
select a subtitle language. The number of available  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
languages appears at the right of the subtitle display. In the  
example below, six languages are available ( /6).After a few  
seconds, the subtitles will appear.  
Or, press SUBTITLE repeatedly to turn off subtitles.  
When no subtitles are available,“NOT AVAILABLE”  
appears at the right of the subtitle display.  
1
OK  
STOP  
PLAY  
PAUSE  
STANDBY-ON  
SEARCH MODE  
DISPLAY  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
SUBTITLE ZOOM  
SKIP / CH  
Camera Angles  
Some DVDs contain scenes recorded from different angles or  
perspectives.The perspective will not change if the DVD does not  
contain sequences recorded from different camera angles.  
RETURN  
TITLE CLEAR/RESET SLOW  
2
1
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
Press DVD to put the DVD/VCR in DVD mode.  
DVD light will appear on the front of the DVD/VCR.  
1
2
OK  
During playback, press ANGLE repeatedly to select  
a different perspective. The number of available angles  
STOP  
PLAY  
PAUSE  
appears at the right of the Angle display. In this example,  
eight angles are available ( /8).  
Helpful Hints  
• With some DVDs, you must  
select a subtitle language in  
the disc menu.  
• If the desired language does  
not appear after pressing  
SUBTITLE several times, the  
disc does not have subtitles in  
that language.  
• Opening the disc tray will  
cancel your subtitle setting.  
• If the ANGLE ICON setting is  
ON,  
will appear on the TV  
screen when the current  
portion of the disc has  
multiple camera angles.To set  
the ANGLE ICON ON or  
OFF, see pages 58-59.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 43  
Audio Language, Stereo Sound Mode 43  
Audio Language  
STANDBY-ON  
You can select a language for DVDs during playback if multiple  
languages are available.  
SEARCH MODE  
DISPLAY  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
Press DVD to put the DVD/VCR in DVD mode.  
2
DVD light will appear on the front of the DVD/VCR.  
SUBTITLE ZOOM  
SKIP / CH  
1
2
During DVD playback, press AUDIO repeatedly to  
RETURN  
TITLE CLEAR/RESET SLOW  
choose one of the available languages. Audio display  
appears at the top of the TV screen, and the new audio will  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
1
be heard.The display will disappear after about 5 seconds.  
The Audio display may show the current settings for the  
Dolby Digital or multi-channel (5.1CH) sound, if they are  
available on the disc, and the sampling rate of the disc.The  
number of available languages appears after the “ / ” at the  
right of the display ( /3, for example).  
OK  
STOP  
PLAY  
PAUSE  
1.ENG Dolby D 3/2.1ch 48k/3  
Example: English audio  
STANDBY-ON  
SEARCH MODE  
DISPLAY  
Stereo Sound Mode  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
Adjust Stereo Sound to determine whether you will hear the  
left channel, the right channel or both channels (stereo)  
during Video CD or Audio CD playback.  
1
SUBTITLE ZOOM  
SKIP / CH  
RETURN  
TITLE CLEAR/RESET SLOW  
If you connected the DVD/VCR to a Stereo using the  
COAXIAL DIGITAL AUDIO OUT jack as described on page  
14, or if you connected to a TV with only the RF coaxial  
cable, you cannot adjust Stereo Sound Mode.  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
Press AUDIO repeatedly during Video CD or  
OK  
Audio CD playback to choose STEREO, L-ch or  
1
R-ch.  
STOP  
PLAY  
PAUSE  
STEREO  
Both right and left channels  
are heard (stereo).  
Helpful Hints  
• If a language is not available  
after pressing AUDIO several  
times, the DVD does not have  
that language.  
• Some DVDs only let you  
change the language in the disc  
menu.  
L-ch  
Only the left channel  
is heard.  
• Audio languages may be  
abbreviated (such as ENG for  
English). Or, three dashes (- - -)  
may appear instead of an  
abbreviation.  
R-ch  
Only the right channel  
is heard.  
• Audio language selection cannot  
be made during Rapid Play with  
Voice. (Refer to page 36.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 44  
44 Slow Motion, Zoom  
Slow Motion  
STANDBY-ON  
Press PAUSE F during DVD orVideo CD playback.  
SEARCH MODE  
DISPLAY  
1
2
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
Press D or h. Slow motion playback will begin. Press  
D or h repeatedly during slow motion playback to play  
a DVD forward or backward at approximately 1/16, 1/8 or  
1/2 the normal speed. Reverse slow motion is not available  
on aVideo CD.  
SUBTITLE ZOOM  
SKIP / CH  
RETURN  
TITLE CLEAR/RESET SLOW  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
An  
1 (1/16),  
2 (1/8) or  
3 (1/2) will appear  
briefly on the TV screen to indicate slow forward playback.  
An  
1 (1/16),  
2 (1/8) or  
3 (1/2) will indicate slow  
OK  
reverse playback.  
2
3
3
STOP  
PLAY  
PAUSE  
TIMER SET  
SPEED  
MARKER  
RECORD  
1
2
1
2
3
Example: Playing a DVD forward  
at half the normal speed.  
STANDBY-ON  
Press PLAY B to return to normal playback.  
SEARCH MODE  
DISPLAY  
AUDIO  
3
REPEAT REPEAT  
A-B  
Zoom  
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
Zooming lets you enlarge the playback image of DVDs,Video CDs  
or JPEG CDs, and lets you pan through the enlarged image.  
RETURN  
TITLE CLEAR/RESET SLOW  
1,3  
Press ZOOM during playback or when playback is  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
paused. The picture will appear twice as large. Press  
1
ZOOM again to make the picture four times larger than  
normal. Either x2 or x4 will appear beside the zoom icon in  
the upper left corner of the TV screen.  
OK  
While the picture is enlarged, press  
K, L, s or B to move the zoomed image up, down,  
STOP  
PLAY  
PAUSE  
2
left or right.  
TIMER SET  
SPEED  
MARKER  
RECORD  
The gray box with an inner blue box that shows during  
Zoomed playback is the position guide.To remove it or  
show it, press OK.The position of the blue box inside the  
gray box indicates the position of the zoomed image within  
the overall picture.  
1
2
3
Helpful Hints  
• Only slow forward is abailable  
forVideo CDs.  
• The sound will be mute during  
paused or slow motion  
playback.  
• You cannot zoom a disc menu.  
• The x4 zooming is not active  
with some discs. Only x2  
zooming is available forVideo  
CDs and JPEG CDs.  
• Position guide is not available  
for JPEG playback.  
To return the picture to normal, press ZOOM  
repeatedly.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 45  
Program/Random Playback 45  
Program Playback  
STANDBY-ON  
You may determine the order in which Audio CD, MP3,  
TM  
Windows Media Audio or JPEG tracks will play.  
SEARCH MODE  
DISPLAY  
AUDIO  
Random Playback  
REPEAT REPEAT  
A-B  
You may play the tracks of an Audio CD in Random order instead  
of the order in which they are recorded (1,2,3...).You can also use  
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
TM  
this feature for MP3,Windows Media Audio and JPEG tracks.  
RETURN  
TITLE CLEAR/RESET SLOW  
Press DVD to put the DVD/VCR in DVD mode.  
DVD light will appear on the front of the DVD/VCR.  
1
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
While playback is stopped, press MODE  
repeatedly until the PROGRAM/RANDOM screen  
2 appears.  
OK  
Disc name  
CD-DA  
TOTAL 0:00:00  
1
2
3
4
5
6
7
3:30  
4:30  
5:00  
3:10  
5:10  
1:30  
2:30  
STOP  
PLAY  
PAUSE  
TIMER SET  
SPEED  
MARKER  
RECORD  
OK  
1/4  
1/1  
1
3:30  
1
2
6
0
3
7
Example: Audio CD  
Example: MP3  
(DUAL PLAYBACK - OFF)  
4
8
5
9
+10  
Program Playback  
Press K or L to select a track you want to play,  
then press OK.  
Helpful Hints  
3
•
You cannot use the Number  
buttons or SEARCH to select  
another track while playing a  
CD-DA  
TOTAL 1:03:30  
1
2
3
4
5
6
7
3:30  
4:30  
5:00  
3:10  
5:10  
1:30  
2:30  
1
5
3:30  
5:10  
10 4:20  
11 3:00  
12 3:20  
17 4:10  
22 2:50  
2/3  
K
program. Use SKIP ∑/CH or  
OK  
1/4  
1
3:30  
L
SKIP w/CH to select other  
tracks in a program.  
Example: Audio CD  
• You cannot combine Random  
playback with a program.  
• You may play a program or a  
track within a program  
Press CLEAR to erase the last track in the program if you  
make an error.Additional tracks may be on other screens.  
Press L to go on to the next page, and press K to go back  
to the previous page. Repeat this step until you have  
selected all the tracks you wish to play in the program.  
To see tracks in a program when there are more than 8  
tracks, use SKIP w/CHK, SKIP ∑/CHL to see all the  
repeatedly. During program  
playback, press REPEAT so ALL  
(all tracks in the program) or  
TRACK appears.The entire  
program or the current track  
will play over and over.  
• You cannot alter a program  
during playback.  
• You can start program playback  
only while in the PROGRAM  
screen.  
TM  
tracks. For MP3,Windows Media Audio or JPEG folders,  
press s or B to go to the previous or next level of  
folders. Press TITLE to return to the first item in the  
highest level.  
Press PLAY B. The tracks will play once in the order you  
set.Turning off the player or opening the disc tray will erase  
4 the program.  
• A program can have a maximum  
of 99 tracks.  
Random Playback  
• To erase all tracks in the  
program, select ALL CLEAR at  
step 3.  
While the RANDOM screen appears, press  
PLAY B. The tracks will play in random order.After all  
3
the tracks play once, playback will stop.  
• Program/Random playback of  
TM  
MP3,Windows Media Audio  
or JPEG tracks is not available  
while DUAL PLAYBACK is ON.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 46  
TM  
46 MP3/Windows Media Audio/JPEG Playback  
TM  
The DVD/VCR will play MP3,Windows Media Audio and JPEG files  
RETURN  
TITLE CLEAR/RESET SLOW  
that you record and finalize on a CD-R (Compact Disc-Recordable)  
or CD-RW (Compact Disc-Rewritable).  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
These discs may contain pictures in a JPEG format or audio tracks in  
1
2-3  
4
TM  
an MP3 orWindows Media Audio format. For example, you may  
have photographic film developed by a retailer that places the pictures  
on a CD-R for you.These pictures may be in JPEG format. Or, you  
OK  
TM  
may copy or download MP3/Windows Media Audio music files from  
certain legal Internet sites, then copy those files onto a CD-R or  
CD-RW.  
You cannot make or record such discs using this DVD/VCR. See your  
computer manual for details on recording.  
Keep these characteristics in mind when making discs you intend to  
play on the DVD player of this DVD/VCR.  
STOP  
PLAY  
PAUSE  
TIMER SET  
MARKER  
RECORD  
● Record MP3 files at a sampling frequency of 44.1 kHz or  
48 kHz. Record in a constant bit rate between 32 kbps and 320  
kbps.  
Helpful Hints  
TM  
• MP3/Windows Media Audio  
tracks and JPEG images are  
known as files. Groups of files are  
called folders.  
TM  
● RecordWindows Media Audio tracks at a sampling frequency of  
44.1kHz or 48kHz. Record in a constant bit rate between 48-  
192kbps.  
● When recording JPEG files, the size of the picture should be  
between 32 x 32 and 6300 x 5100 dots.  
• Folders have the  
icon, MP3  
3
files have the icon, Windows  
TM  
Media Audio files have the  
icon and JPEG files have the  
icon.  
Press DVD to put the DVD/VCR in DVD mode.  
DVD light will appear on the front of the DVD/VCR.  
1
• A maximum of 255 folders can be  
recognized.A maximum of 999  
files can be recognized.  
• If you use PLAY B to close the  
disc tray, playback starts  
automatically. If you use  
When you put a CD-R or CD-RW with MP3,  
TM  
Windows Media Audio or JPEG files in the DVD/VCR, a file  
2
list will appear on theTV when you press DISC/VCR MENU.  
(If you use PLAY B to close the disc tray, Playback starts  
automatically.) Press K or L to select a folder, MP3,  
TM  
Windows Media Audio or JPEG file.  
OPEN/CLOSE A to close the  
disc tray, you have to press  
PLAY B to start playback.  
• During playback, use the Number  
buttons or  
If you choose a track or file, press PLAY B or OK.  
Starting with the track or file you selected, the tracks/files will  
3
play in the order they were recorded, i.e. 1, 2, 3.  
If you select a folder and press OK, the tracks or files  
within that folder will appear. Press K or L to select  
SKIP ∑/CH K and  
the track or file you want to play, then press PLAY  
or OK.  
B
SKIP w/CH L to change tracks.  
If a track is not available,“X” will  
appear on theTV screen, and  
playback may resume at an  
incorrect track or may continue  
with its current track.  
● PressTITLE to return to the first item in the highest level of  
folders or files.You also can press { or B to return to  
previous or next levels.  
● To change theTRANSITION MODE for JPEG playback,  
press MODE repeatedly untilTRANSITION MODE appears  
• SpecificTime playback is not  
possible with MP3 files.  
on top of theTV screen during playback. Then press { ,  
B
• To see the file list during playback,  
press DISC/VCR MENU. The  
current track will be highlighted.  
• Progressive JPEGs (JPEG files  
saved in the progressive format)  
will not play on this DVD player.  
• Copyright protected  
or OK to switch CUT IN/OUT and FADE IN/OUT. If you  
choose CUT IN/OUT, the images will cut in and out sharply  
as playback progresses. If you choose FADE IN/OUT, the  
images will fade in and out as playback progresses.  
● To change the size of the playback image, press MODE  
repeatedly until SIZE MODE appears at the top of theTV  
screen during playback. Then press { , B or OK to switch  
NORMAL(100%) and SMALL(95%).  
TM  
Windows Media Audio files will  
not play on this DVD player.  
• High resolution JPEG files takes  
longer to be displayed.  
● Press MODE to remove the display.  
● During JPEG playback, press { or B to rotate a picture 90  
degrees clockwise or counter-clockwise.  
• SIZE CHANGE MODE may have  
no effect on some files (e.g. files  
with a small picture size).  
To stop playback, press STOP C.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 47  
TM  
MP3/Windows Media Audio/JPEG Playback (cont’d) 47  
Dual Playback  
STANDBY-ON  
This feature lets you play MP3 and JPEG files simultaneously.  
SEARCH MODE  
DISPLAY  
AUDIO  
Available only when DUAL PLAYBACK is ON.  
See pages 58-59 on how to set the DUAL PLAYBACK ON  
or OFF.  
REPEAT REPEAT  
A-B  
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
Press DVD to put the DVD/VCR in DVD mode.  
RETURN  
TITLE CLEAR/RESET SLOW  
DVD light will appear on the front of the  
1
DVD/VCR.  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
1
3
Press DISC/VCR MENU during MP3/JPEG  
playback.  
A file list will appear.  
2
4
2
OK  
2
STOP  
PLAY  
PAUSE  
K
L
Press or to select a desired MP3/JPEG file  
from the List and press PLAY B or OK.  
3
4
STANDBY-ON  
To stop playback, press STOP C.  
SEARCH MODE  
DISPLAY  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
Folder Playback  
You may select to play a folder.  
SUBTITLE ZOOM  
SKIP / CH  
Available only when DUAL PLAYBACK is ON.  
See pages 58-59 on how to set the DUAL PLAYBACK ON  
or OFF.  
RETURN  
TITLE CLEAR/RESET SLOW  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
1
3
Press DVD to put the DVD/VCR in DVD mode.  
OK  
DVD light will appear on the front of the  
1
2
3
DVD/VCR.  
STOP  
PLAY  
PAUSE  
While playback is stopped, press MODE.  
A folder list will appear.  
Helpful Hints  
• If you press PLAY B directly  
Press K or L to select a folder, then press  
after you inserted a disc which  
contains both MP3 and JPEG files  
and if the DUAL PLAYBACK  
setting is ON, Dual Playback will  
start automatically.  
PLAY B or OK.  
● MP3 and JPEG files in the selected folder will play  
simultaneously.  
• You can not playWindows  
Media Audio and JPEG files  
TM  
together at the same time. If you  
choose aWindows Media Audio  
TM  
file during Dual Playback, only  
TM  
Windows Media Audio file will  
play.  
• Zooming or rotating a JPEG file  
during Dual Playback may cause  
an intermittent sound.  
• Dual Playback may not function  
properly if MP3 and JPEG files on  
the disc interfere each other due  
to the difference in their data size.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 48  
48 On-Screen Displays  
DVD Displays  
STANDBY-ON  
Press DVD to put the DVD/VCR in DVD mode.  
DVD light will appear on the front of the DVD/VCR.  
SEARCH MODE  
DISPLAY  
1
2
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
2-3  
1
Press DISPLAY repeatedly to see the following  
displays during DVD playback.  
SUBTITLE ZOOM  
SKIP / CH  
RETURN  
TITLE CLEAR/RESET SLOW  
7/49 0:01:46 - 0:03:27  
3
Elapsed playing time  
of the current chapter;  
remaining playing time  
of the current chapter  
CH (chapter):  
Current chapter number/  
total chapters  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
OK  
1/2 0:00:00 - 1:23:45  
TT (title):  
Current title number/  
total titles  
Elapsed playing time of the  
current title; remaining playing  
time of the current title  
STOP  
PLAY  
PAUSE  
TIMER SET  
SPEED  
MARKER  
RECORD  
BIT RATE: The amount of audio  
and video data currently being read.  
C L0  
1
2
6
0
3
7
Layer number, appears  
only when playing a  
two-layered disc.  
L0: Layer 0 is playing  
L1: Layer 1 is playing  
4
8
5
9
+10  
Current Repeat setting, if active  
C: Chapter repeat  
T: Title repeat  
A
B: A-B repeat  
Press DISPLAY repeatedly or press RETURN to  
remove the display.  
3
Video CD and Audio CD Displays  
STANDBY-ON  
Press DVD to put the DVD/VCR in DVD mode.  
SEARCH MODE  
DISPLAY  
DVD light will appear on the front of the DVD/VCR.  
1
2
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
2-3  
1
Press DISPLAY repeatedly to see the following  
SUBTITLE ZOOM  
SKIP / CH  
displays during Video CD (without PBC) or Audio  
RETURN  
TITLE CLEAR/RESET SLOW  
CD play.  
4/12 0:03:21 - 0:02:15  
3
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
TR (track):  
Current track number/  
total tracks  
Elapsed playing time  
of the current track;  
remaining playing time  
of the current track  
OK  
4/12 0:13:45 - 0:45:40  
T
Current Repeat setting, if active  
T: Track repeat  
A: All tracks repeat  
ALL:  
STOP  
PLAY  
PAUSE  
Current track number/  
total tracks  
A
B: A-B repeat  
Elapsed playing time  
of the current Audio CD;  
remaining playing time of  
the current Audio CD  
TIMER SET  
SPEED  
MARKER  
RECORD  
1
2
6
0
3
7
Press DISPLAY repeatedly or press RETURN to  
remove the display.  
4
8
5
9
3
+10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 49  
On-Screen Displays (cont’d) 49  
TM  
MP3/Windows Media Audio/JPEG Displays  
STANDBY-ON  
Review MP3 and JPEG track information during playback.  
SEARCH MODE  
DISPLAY  
Press DVD to put the DVD/VCR in DVD mode.  
DVD light will appear on the front of the DVD/VCR.  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
1
2-3  
1
Press DISPLAY until the current track or file  
information appears.  
SUBTITLE ZOOM  
SKIP / CH  
2
RETURN  
TITLE CLEAR/RESET SLOW  
TM  
During JPEG playback  
During Windows Media Audio playback  
JPEG file name  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
track name  
or  
During MP3 playback  
OK  
MP3 file name  
title name  
STOP  
PLAY  
PAUSE  
TIMER SET  
SPEED  
MARKER  
RECORD  
artist name  
1
2
6
0
3
7
4
8
5
9
+10  
T
2/25 0:01:15  
Current repeat setting  
TR (track):  
Current track number  
/total tracks  
Elapsed playing time  
of the current track  
(for MP3 only)  
Example: MP3 playback  
The following may appear to indicate Repeat playback.  
T: The current track will play repeatedly.  
G: tracks in the current folder (group) will play  
repeatedly.  
A: All tracks will play repeatedly  
only during PROGRAM Playback  
or  
only during RANDOM Playback  
or  
only during FOLDER Playback  
● Program and Random Playback is available only when  
DUAL PLAYBACK is OFF.  
● Folder Playback is available only when DUAL  
PLAYBACK is ON.  
Helpful Hint  
• For MP3 files recorded with  
Variable Bit Rate (VBR), the  
elapsed time displayed on the  
screen may vary from the  
actual elapsed time.  
Press DISPLAY again to remove the display.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 50  
50 Black Level,Virtual Surround  
Black Level  
Adjust Black Level to brighten the DVD orVideo CD picture.  
Press DVD to put the DVD/VCR in DVD mode.  
DVD light will appear on the front of the DVD/VCR.  
1
During DVD orVideo CD playback, press  
MODE so the Black Level icon shows in the top left  
2 corner of the TV screen.  
Helpful Hints  
• Black Level is not available for  
a PAL DVD.  
ON  
Within 10 seconds, press s , B or OK  
repeatedly to choose ON or OFF. ON brightens  
3the dark parts of the picture. OFF shows the original  
• Virtual Surround is available  
only when the player is  
connected to a Stereo or TV  
using the red and white  
AUDIO OUT jacks on the  
player.  
• ForVideo CDs and Audio  
CDs, you can adjustVirtual  
Surround only if you set  
Stereo Sound to STEREO.  
Details are on page 43.  
• The Black Level andVirtual  
Surround settings will be saved  
even if the player is turned off.  
• The Black Level andVirtual  
Surround settings cannot be  
used during x1.3 and x0.8  
Rapid Play withVoice (refer to  
page 36).  
picture as recorded.  
Virtual Surround  
You can enjoy improved stereo sound when you play DVDs,  
TM  
Video CDs, Audio CDs, MP3 or Windows Media Audio  
files recorded in Dolby Digital or Pulse Code Modulation  
(PCM). Check the disc case for details on availability.  
Press DVD to put the DVD/VCR in DVD mode.  
DVD light will appear on the front of the DVD/VCR.  
1
During disc playback, press MODE repeatedly  
until theVirtual Surround icon appears in the top left  
2 corner of the TV screen.  
OFF  
While theVirtual Surround icon appears, press s ,  
or OK to choose 1, 2 or OFF. The default setting is  
B
3 OFF. The icon will disappear after about 10 seconds.  
Initializing  
Use INITIALIZE to return all your DVD player’s SETUP menu  
items (except PARENTAL) to their default settings.  
STANDBY-ON  
SEARCH MODE  
DISPLAY  
AUDIO  
Press DVD to put the DVD/VCR in DVD mode.  
DVD light will appear on the front of the DVD/VCR.  
REPEAT REPEAT  
A-B  
1
While playback is stopped, press SYSTEM/MENU.  
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
The QUICK SETUP screen appears.  
2
RETURN  
TITLE CLEAR/RESET SLOW  
QUICK SETUP  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
PLAYER MENU  
TV ASPECT  
PROGRESSIVE  
DOLBY DIGITAL  
ENGLISH  
4:3 LETTER BOX  
OFF  
1
BITSTREAM  
OK  
2,5  
OK  
3-4  
Press s or B to select INIT. (INITIALIZE)  
at the top of the menu, then press OK.  
3
STOP  
PLAY  
PAUSE  
TIMER SET  
SPEED  
MARKER  
RECORD  
INITIALIZE  
Initialize?  
NO  
YES  
OK  
1
2
6
0
3
7
4
8
5
9
Press K or L to selectYES.Then, press OK twice.  
+10  
To cancel the process, select NO instead.  
4
5
Press SYSTEM/MENU to remove the menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 51  
Language 51  
You can select different languages for the Audio or Subtitles  
of DVDs, as well as languages for DVD disc menus and the  
setup menus of the DVD player.  
STANDBY-ON  
SEARCH MODE  
DISPLAY  
AUDIO  
Press DVD to put the DVD/VCR in DVD mode.  
REPEAT REPEAT  
A-B  
DVD light will appear on the front of the DVD/VCR.  
1
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
While playback is stopped, press  
RETURN  
TITLE CLEAR/RESET SLOW  
SYSTEM/MENU. The QUICK SETUP screen  
2
appears.  
1
3-5  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
QUICK SETUP  
PLAYER MENU  
TV ASPECT  
PROGRESSIVE  
DOLBY DIGITAL  
ENGLISH  
4:3 LETTER BOX  
OFF  
2
BITSTREAM  
OK  
OK  
Press s or B to select CUSTOM at the top of  
STOP  
PLAY  
PAUSE  
the menu, then press OK.  
3
TIMER SET  
SPEED  
MARKER  
RECORD  
1
2
6
3
7
4
5
(LANGUAGE) will be selected. Press OK.  
Helpful Hints  
4
5
• If the DVD’s default settings for  
Audio and Subtitle are the same  
language, the subtitles may not  
show unless you turn them on.  
• Use the AUDIO and SUBTITLE  
buttons to select Audio and  
Subtitles available on the DVD.  
Details are on pages 42-43.  
Press K or L to select AUDIO, SUBTITLE, DISC  
MENU or PLAYER MENU. Press OK. The language  
options for the selected item will appear.  
• If you set AUDIO to ORIGINAL,  
the default setting of the DVD  
Audio will play.  
AUDIO:The DVD’s audio plays  
in the selected language.  
LANGUAGE  
AUDIO  
ORIGINAL  
ENGLISH  
FRENCH  
• If you set PLAYER MENU to  
FRANCAIS (French) or ESPAÑOL  
(Spanish) and need English: Follow  
steps 1-2.At step 3, the IDIOMA  
or LANGUE menu will appear.  
Press OK. Press L to select  
MENU DU LECTEUR or MENÚ  
REPRODUC., then press OK.  
Press K to select ENGLISH, then  
press OK.The menus will change  
to English. Press SETUP to remove  
the menus.  
SPANISH  
OK  
GERMAN  
ITALIAN  
SWEDISH  
SUBTITLE: Subtitles appear in  
the selected language.  
LANGUAGE  
SUBTITLE  
OFF  
ENGLISH  
FRENCH  
SPANISH  
OK  
GERMAN  
ITALIAN  
SWEDISH  
DISC MENU:A DVD’s disc  
• You can change the PLAYER  
MENU language in the QUICK  
SETUP menu that appears when  
you first press SETUP.With  
LANGUAGE  
DISC MENU  
ENGLISH  
FRENCH  
SPANISH  
GERMAN  
menu appears in the selected  
language.  
OK  
ITALIAN  
SWEDISH  
DUTCH  
QUICK selected, press OK.  
PLAYER MENU will be selected.  
Press OK. Press K or L to  
PLAYER MENU:The DVD  
LANGUAGE  
PLAYER MENU  
ENGLISH  
FRANÇAIS  
ESPAÑOL  
player’s setup menu can be in  
choose a language, then press OK.  
Press SETUP to remove the menu.  
• The language settings may not take  
effect until you restart disc  
English, French or Spanish only.  
OK  
playback from the beginning.  
Instructions continue on the next page.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 52  
52 Language (cont’d)  
Instructions continued from the previous page.  
STANDBY-ON  
Press K or L to select a language, then press  
OK. The language lists may continue on multiple  
SEARCH MODE  
DISPLAY  
6
screens. Press K or L to move to the other screens.  
● If you select OTHER for AUDIO, SUBTITLE,  
or DISC MENU, press four Number buttons  
to enter the code for the language you desire.  
Use one of the Language Codes listed below.The  
language or language code you select will appear in  
the Language menu beside AUDIO, SUBTITLE, or  
DISC MENU.  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
SUBTITLE ZOOM  
SKIP / CH  
RETURN  
TITLE CLEAR/RESET SLOW  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
7
6
LANGUAGE  
OK  
LANGUAGE CODE  
Please enter a 4-digit language code.  
OK  
STOP  
PLAY  
PAUSE  
● You can select other languages for AUDIO,  
SUBTITLE and DISC MENU only if the language is  
available on the disc. If the language you select is  
not recorded on the DVD, changing these settings  
will have no effect.  
TIMER SET  
SPEED  
MARKER  
RECORD  
1
2
6
0
3
7
4
8
5
9
+10  
Press SYSTEM/MENU to remove the menu.  
7
Abkhazian  
Afar  
Afrikaans  
Albanian  
Amharic  
Arabic  
Armenian  
Assamese  
Aymara  
Language Codes  
A-B  
English  
5160 Kannada  
5161 Kashmiri  
5166 Kazakh  
5760 Panjabi  
5765 Pashto  
5757 Persian  
6247  
T
4748 Esperanto  
4747 Estonian  
6265 Tagalog  
5247 Tajik  
6258 Tamil  
6658  
6653  
6647  
6666  
6651  
6654  
4861  
6655  
6661  
6665  
6664  
6657  
6669  
4752  
F-H  
Kinyarwanda 6469 Polish  
6563 Faroese  
4759 Fiji  
5261 Kirghiz  
5256 Kirundi  
5255 Korean  
5264 Kurdish  
5271  
5771 Portuguese 6266 Tatar  
6460 Pushto  
5761 Quechua  
6265 Telugu  
6367 Thai  
4764 Finnish  
5471 French  
4765 Frisian  
5767 Rhaeto-Romance 6459 Tibetan  
L-N  
Romanian  
5861 Russian  
5847  
6461 Tigrinya  
6467 Tonga  
Tsonga  
4771 Gaelic (Scots) 5350 Laothian  
Azerbaijani 4772 Galician  
Bangla  
5358 Latin  
4860 Georgian  
4847 German  
5167 Greek  
5747 Latvian  
5051 Lettish  
5158 Lingala  
5868  
S
Turkish  
Bashkir  
Basque  
Bengali  
Bhutani  
Bihari  
Bislama  
Breton  
Bulgarian  
Burmese  
5868 Samoan  
5860 Sangho  
5866 Sanskrit  
6559 Turkmen  
6553 Twi  
6547  
4860 Greenlandic 5758 Lithuanian  
U-Z  
5072 Guarani  
4854 Gujarati  
4855 Hausa  
4864 Hebrew  
4853 Hindi  
5971 Hungarian  
5360 Macedonian 5957 Serbian  
5367 Malagasy  
5447 Malay  
6564 Ukrainian  
Urdu  
6757  
6764  
6772  
5953 Serbo-Croatian  
5965  
5958 Sesotho  
5966 Setswana  
5955 Shona  
5964 Sindhi  
5961 Singhalese  
5960 Siswat  
6047 Slovak  
6051 Slovenian  
6554 Uzbek  
5569 Malayalam  
5455 Maltese  
5467 Maori  
I-K Marathi  
6566 Vietnamese 6855  
6660 Volapuk  
6560 Welsh  
6550 Wolof  
6555 Xhosa  
6565 Yiddish  
6557 Yoruba  
6558 Zulu  
6561  
6861  
4971  
6961  
7054  
5655  
7161  
7267  
Byelorussian 4851  
C-E  
Icelandic  
5565 Moldavian  
5560 Mongolian  
5547 Nauru  
5551 Nepali  
Cambodian 5759 Indonesian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
Danish  
Dutch  
4947 Interlingua  
7254 Interlingue  
4961 Inupiak  
5464 Irish  
4965 Italian  
5047 Japanese  
6058 Javanese  
5557 Norwegian 6061 Somali  
5347  
O-R  
Spanish  
6149 Sundanese  
6164 Swahili  
5165  
5566 Occitan  
5647 Oriya  
6567  
6569  
5669 Oromo (Afan)6159 Swedish  
6568  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 53  
Display 53  
You may adjust the TV Aspect ratio and Still Mode clarity,  
and Progressive Scan compatibility.  
STANDBY-ON  
Press DVD to put the DVD/VCR in DVD mode.  
DVD light will appear on the front of the DVD/VCR.  
SEARCH MODE  
DISPLAY  
AUDIO  
1
When playback is stopped, press  
REPEAT REPEAT  
A-B  
SYSTEM/MENU. The QUICK SETUP screen will  
2
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
appear.  
RETURN  
TITLE CLEAR/RESET SLOW  
QUICK SETUP  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
1
PLAYER MENU  
TV ASPECT  
PROGRESSIVE  
DOLBY DIGITAL  
ENGLISH  
4:3 LETTER BOX  
OFF  
BITSTREAM  
OK  
2
OK  
3-5  
Press s or B to select CUSTOM at the top of  
the menu, then press OK.  
3
4
5
STOP  
PLAY  
PAUSE  
TIMER SET  
SPEED  
MARKER  
RECORD  
LANGUAGE  
AUDIO  
ORIGINAL  
OFF  
ENGLISH  
ENGLISH  
SUBTITLE  
DISC MENU  
PLAYER MENU  
1
2
6
0
3
7
OK  
4
8
5
9
+10  
Press s or B to select  
press OK.  
(DISPLAY), then  
DISPLAY  
TV ASPECT  
STILL MODE  
PROGRESSIVE  
4:3 LETTER BOX  
AUTO  
OFF  
OK  
Press K or L to select an item, then press OK.  
● If you selectedTV ASPECT, press K or L to  
select a setting, then press OK.  
Choose 4:3 LETTER BOX if you want to see the entire,  
widened picture with black bars at the top and bottom of  
the screen.This looks like the picture you see when  
watching movies in a theater. This setting is possible only if  
the DVD was recorded in the letterbox or widescreen  
format.  
Choose 4:3 PAN & SCAN for a full height picture,  
with both sides trimmed. Some companies refer to  
this as reformatting the picture to fit yourTV screen  
and may call it the regular or normal format.  
Choose 16:9WIDE if you connected a widescreen  
TV to the DVD player.  
Helpful Hints  
• Selecting a differentTVASPECT  
setting is only effective if it is  
available on the DVD. Check the  
DVD disc menu or case for  
details.  
• You also can adjustTVASPECT in  
the QUICK SETUP menu that  
appears when you first press the  
SYSTEM/MENU.With QUICK  
selected, press OK. Press L to  
selectTVASPECT, then press  
OK. Press K or L to choose a  
setting, then press OK. Press  
SYSTEM/MENU to remove the  
menu.  
DISPLAY  
TV ASPECT  
4:3 LETTER BOX  
4:3 PAN  
&
SCAN  
16:9 WIDE  
OK  
TV ASPECT  
Instructions continue on the next page.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 54  
54 Display (cont’d)  
Instructions continued from the previous page.  
●
If you selected STILL MODE, press K or L to select a  
setting, then press OK. This determines the quality of an  
image in still mode.AUTO is the default setting.  
STANDBY-ON  
SEARCH MODE  
DISPLAY  
If you select FIELD, still images will be stabilized but  
coarse due to the small amount of data.  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
If you select FRAME, the images will be highly defined due  
to the simultaneous output of two fields.  
SUBTITLE ZOOM  
SKIP / CH  
RETURN  
TITLE CLEAR/RESET SLOW  
DISPLAY  
STILL MODE  
AUTO  
FIELD  
FRAME  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
OK  
6
STILL MODE  
OK  
Press SYSTEM/MENU to remove the menu.  
6
Progressive Scan  
You may adjust the Progressive Scan compatibility.  
Follow the steps 1-4 in the Display setup on page 53.  
1
STANDBY-ON  
SEARCH MODE  
DISPLAY  
● Press K or L to select PROGRESSIVE, then press  
OK repeatedly to turn PROGRESSIVE ON or OFF. The  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
2
default setting is OFF. Choose ON if your TV has  
Progressive Scan and if the TV is connected to the  
player’s COMPONENTVIDEO OUT jacks. Choose OFF  
otherwise.  
SUBTITLE ZOOM  
SKIP / CH  
RETURN  
TITLE CLEAR/RESET SLOW  
Press SYSTEM/MENU to remove the menu.  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
● If PROGRESSIVE is ON, this message appears:  
3
1
OK  
2-3  
STOP  
PLAY  
PAUSE  
Helpful Hints  
Press K or L to make a selection, then press OK.  
If you select NO, the menu disappears and  
• You can set PROGRESSIVE to  
OFF either in the DISPLAY  
menu or by pressing and  
holding PLAY B on the front  
of the player for more than 5  
seconds.  
PROGRESSIVE is OFF. If you selectYES, this appears:  
Confirm again to use progressive scan.  
If Picture is good, Select “YES”.  
• You can adjust PROGRESSIVE  
in the QUICK SETUP menu  
that appears when you first  
press SETUP.With QUICK  
selected, press OK. Press L to  
select PROGRESSIVE. Press  
OK to choose OFF or ON.  
Press SETUP to remove the  
menu.  
NO  
YES  
SELECT: K /  
L
SET:OK  
Confirm your setting, then press OK. The menu will  
disappear and PROGRESSIVE will be ON.  
If you do not press any buttons for 15 seconds,  
Progressive Scan will switch to OFF.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 55  
Audio 55  
Change Audio settings based on other equipment you  
connected to the DVD player or according to your disc  
sound features.These setting only affect the Audio from the  
DVD player of the DVD/VCR.  
STANDBY-ON  
SEARCH MODE  
DISPLAY  
Press DVD to put the DVD/VCR in DVD mode.  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
DVD light will appear on the front of the DVD/VCR.  
1
2
SUBTITLE ZOOM  
SKIP / CH  
While playback is stopped, press  
RETURN  
TITLE CLEAR/RESET SLOW  
SYSTEM/MENU. The QUICK SETUP screen will  
appear.  
1
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
QUICK SETUP  
PLAYER MENU  
TV ASPECT  
PROGRESSIVE  
DOLBY DIGITAL  
ENGLISH  
4:3 LETTER BOX  
OFF  
2,7  
BITSTREAM  
OK  
OK  
3-6  
STOP  
PLAY  
PAUSE  
Press s or B to select CUSTOM at the top of  
the menu, then press OK.  
TIMER SET  
SPEED  
MARKER  
RECORD  
3
1
2
6
0
3
7
LANGUAGE  
AUDIO  
ORIGINAL  
OFF  
ENGLISH  
ENGLISH  
SUBTITLE  
DISC MENU  
PLAYER MENU  
4
8
5
9
OK  
+10  
Press s or B to select (AUDIO) at the top  
of the menu, then press OK.  
4
5
Press K or L to select DRC, DOWN  
SAMPLING, or DOLBY DIGITAL, then follow  
step 6 accordingly.  
AUDIO  
DRC  
DOWN SAMPLING ON  
DOLBY DIGITAL  
ON  
BITSTREAM  
OK  
● If you selected DRC, press OK repeatedly to turn  
Dynamic Range Control (DRC) ON or OFF.  
Choosing ON compresses the range of volume by  
suppressing loud sounds and raising low sounds.  
DRC is available only on discs recorded in the  
Dolby Digital format.  
● If you selected DOWN SAMPLING, press OK  
repeatedly to choose ON or OFF. Choose ON to  
set downsampling to 48 kHz. Choose OFF to set  
downsampling to 96 kHz.  
6
Helpful Hints  
• Dolby Digital sound must be  
available on the DVD.  
• You can adjust DOLBY DIGITAL  
in the QUICK SETUP menu that  
appears when you first press  
SYSTEM/MENU.With QUICK  
selected, press OK. Press L to  
select DOLBY DIGITAL. Press  
OK to choose BITSTREAM or  
PCM. Press SYSTEM/MENU to  
remove the menu.  
• When you play a disc that has  
copyright protection,  
downsampling will be at 48 kHz,  
even if you set DOWN  
SAMPLING to OFF.  
DOWN SAMPLING is available only when the player  
is connected to a Stereo using the COAXIAL  
DIGITAL AUDIO OUT jack as described on page 14.  
● If you selected DOLBY DIGITAL, press OK  
repeatedly to select BITSTREAM or PCM. Select  
BITSTREAM if you used the COAXIAL DIGITAL  
AUDIO OUT jack to connect the DVD player to a  
stereo that is Dolby Digital compatible. Details are on  
page 14. Otherwise, choose PCM.  
Press SYSTEM/MENU to remove the menu.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 56  
56 Parental Password  
Parental Controls prevents viewing of DVDs that exceed your rating  
limits.This feature will not limit viewing if the DVD is not rated or  
coded. Check your DVDs and settings before letting children access  
the DVD/VCR.You will need a password to change the Parental settings  
or to play a blocked disc. Follow these steps to change your password.  
STANDBY-ON  
SEARCH MODE  
DISPLAY  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
Press DVD to put the DVD/VCR in DVD mode. DVD  
SUBTITLE ZOOM  
SKIP / CH  
light will appear on the front of the DVD/VCR.  
1
RETURN  
TITLE CLEAR/RESET SLOW  
While playback is stopped, press SYSTEM/MENU.  
The QUICK SETUP screen appears.  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
2
1
2,7  
3-5  
QUICK SETUP  
PLAYER MENU  
TV ASPECT  
PROGRESSIVE  
DOLBY DIGITAL  
ENGLISH  
4:3 LETTER BOX  
OFF  
OK  
BITSTREAM  
OK  
STOP  
PLAY  
PAUSE  
Press s or B to select CUSTOM, then press OK.  
TIMER SET  
SPEED  
MARKER  
RECORD  
3
4
1
2
6
0
3
7
Press s or B to select  
(PARENTAL), then press OK.  
4
8
5
9
● If this is the first time you set a password, this menu will appear.  
4,6  
+10  
PASSWORD  
Press the Number buttons to enter a 4-digit password.  
The password will appear on the screen.Write it down so you  
will not forget it.  
Press OK, and proceed to step 7.  
● If you have set a password before, this menu will appear.  
Press the Number buttons to enter your current  
4-digit password. Asterisks (*) will appear instead of your  
password.This protects its identity. Press OK, and proceed to  
step 7.  
If you like to change the password, press L to select  
PASSWORD CHANGE, then press OK.  
Helpful Hints  
5
• The default password is 4737. If  
you forget your password, press  
Number buttons 4, 7, 3, 7 at  
step 4.You will be prompted to  
enter a new 4-digit password.  
Use the Number buttons to  
enter a new 4-digit password,  
then press OK. PARENTAL  
LEVEL will reset to ALL. See  
page 57 to reset PARENTAL  
LEVEL as you desire.  
PARENTAL  
PARENTAL LEVEL ALL  
PASSWORD CHANGE  
OK  
Press the Number buttons to enter a 4-digit password.  
The password numbers will appear on the screen.Write down the  
6 password so you will not forget it. Press OK. The previous menu  
7
will reappear.  
Press SYSTEM/MENU to remove the menu.  
• A power failure will not erase  
your password.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 57  
Parental Levels 57  
Follow these steps to set the rating level for your DVDs. DVDs  
whose ratings exceed the level you set will not play.  
STANDBY-ON  
SEARCH MODE  
DISPLAY  
AUDIO  
Press DVD to put the DVD/VCR in DVD mode.  
DVD light will appear on the front of the DVD/VCR.  
REPEAT REPEAT  
A-B  
1
While playback is stopped, press SYSTEM/MENU.  
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
The QUICK SETUP screen appears.  
2
RETURN  
TITLE CLEAR/RESET SLOW  
QUICK SETUP  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
PLAYER MENU  
TV ASPECT  
PROGRESSIVE  
DOLBY DIGITAL  
ENGLISH  
4:3 LETTER BOX  
OFF  
1
5
BITSTREAM  
OK  
2,8  
3-4,  
6-7  
OK  
Press s or B to select CUSTOM at the top of the  
menu, then press OK.  
3
4
STOP  
PLAY  
PAUSE  
TIMER SET  
SPEED  
MARKER  
RECORD  
LANGUAGE  
AUDIO  
ORIGINAL  
OFF  
ENGLISH  
ENGLISH  
SUBTITLE  
DISC MENU  
PLAYER MENU  
1
2
6
0
3
7
OK  
4
8
5
9
+10  
Press s or B to select  
the menu, then press OK.  
(PARENTAL), at the top of  
RATING  
EXPLANATIONS  
• ALL - Parental  
Controls is  
inactive; all discs  
can play.  
• 4 - PG13 -  
Unsuitable for  
children under  
• 3 - PG - Parental  
Guidance  
Press the Number buttons to enter your 4-digit  
password.  
13  
5
6
• 8 - Adult material  
• 7 - NC-  
appropriate for  
children under  
• 6 - R - Restricted;  
parental approval  
required for view-  
1
7 - Not  
suggested.  
1- G - General  
Audience;  
recommended for  
all ages.  
Press K or L to select PARENTAL LEVEL, then  
•
press OK.  
17  
PARENTAL  
PARENTAL LEVEL ALL  
PASSWORD CHANGE  
ers under 18.  
OK  
Helpful Hints  
Press K or L to select a level, then press OK.  
The rating levels continue on two menu screens. Press  
K or L repeatedly to move to the next or previous screen  
to find the rating level you want.  
After making your selection, the previous menu will appear.  
The level you selected will appear beside PARENTAL  
LEVEL.  
• When you try to play a DVD  
whose rating exceeds the level  
you set, an on-screen message  
will indicate the DVD cannot  
play. Remove the DVD, then set  
PARENTAL LEVEL to ALL.  
Reload the DVD and begin  
playback. Some DVDs may let  
you enter your 4-digit  
7
PARENTAL  
PARENTAL LEVEL  
ALL  
8
7 [NC-17]  
6 [R]  
5
password to begin playback.  
Follow the on-screen messages  
as prompted.  
OK  
4 [PG13]  
3 [PG]  
• You cannot use the default  
password (4737) to play a DVD.  
Press SYSTEM/MENU to remove the menu.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 58  
58 Others  
You may adjust the Angle Icon,Automatic Power Off,  
Dual Playback and Slide Show settings.  
STANDBY-ON  
SEARCH MODE  
DISPLAY  
Press DVD to put the DVD/VCR in DVD mode.  
DVD light will appear on the front of the DVD/VCR.  
REPEAT REPEAT  
A-B  
AUDIO  
ANGLE  
1
While playback is stopped, press  
SUBTITLE ZOOM  
SKIP / CH  
SYSTEM/MENU. The QUICK SETUP screen  
2
RETURN  
TITLE CLEAR/RESET SLOW  
appears.  
1
2
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
QUICK SETUP  
PLAYER MENU  
TV ASPECT  
PROGRESSIVE  
DOLBY DIGITAL  
ENGLISH  
4:3 LETTER BOX  
OFF  
BITSTREAM  
OK  
OK  
3-5  
STOP  
PLAY  
PAUSE  
Press s or B to select CUSTOM at the top of  
the menu, then press OK.  
TIMER SET  
SPEED  
MARKER  
RECORD  
3
4
5
1
2
6
0
3
7
LANGUAGE  
4
8
5
9
AUDIO  
ORIGINAL  
OFF  
ENGLISH  
ENGLISH  
SUBTITLE  
DISC MENU  
PLAYER MENU  
+10  
OK  
Press s or B to select  
press OK.  
(OTHERS), then  
OTHERS  
ANGLE ICON  
AUTO POWER OFF ON  
DUAL PLAYBACK  
SLIDE SHOW  
ON  
OFF  
5sec  
OK  
Press K or L to select an item, then press OK.  
●
If you selected ANGLE ICON, press OK  
repeatedly to select ON or OFF.The default setting is  
ON. Choose ON to see the Angle icon when multiple  
camera angles are available during DVD playback. Details  
are on page 42. Choose OFF to disable the Angle icon.  
OTHERS  
ANGLE ICON  
ON  
AUTO POWER OFF ON  
DUAL PLAYBACK OFF  
SLIDE SHOW  
5sec  
OK  
ANGLE ICON  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 59  
Others (cont’d) 59  
● If you selected AUTO POWER OFF, press OK  
STANDBY-ON  
repeatedly to choose ON or OFF.The default setting is  
ON. Choose ON if you want the player to turn off when  
there is no activity at the player or its remote for 30  
minutes.  
SEARCH MODE  
DISPLAY  
AUDIO  
REPEAT REPEAT  
A-B  
SUBTITLE ZOOM  
ANGLE  
SKIP / CH  
OTHERS  
RETURN  
TITLE CLEAR/RESET SLOW  
ANGLE ICON  
ON  
AUTO POWER OFF ON  
DUAL PLAYBACK OFF  
SLIDE SHOW  
5sec  
OK  
VCR  
DISC/VCR  
MENU  
VCR/TV  
DVD  
SYSTEM  
MENU  
AUTO POWER OFF  
6
5
OK  
● If you selected DUAL PLAYBACK, press OK to  
choose ON or OFF. This feature lets you play  
MP3 and JPEG files simultaneously.  
STOP  
PLAY  
PAUSE  
TIMER SET  
SPEED  
MARKER  
RECORD  
OTHERS  
ANGLE ICON  
AUTO POWER OFF ON  
DUAL PLAYBACK OFF  
ON  
1
2
6
0
3
7
SLIDE SHOW  
5sec  
OK  
4
8
5
9
+10  
DUAL PLAYBACK  
● If you selected SLIDE SHOW, press K or L to  
choose 5sec, 10sec, or MUSIC, then press OK. This  
adjusts the playback speed of the SLIDE SHOW. The  
default setting is 5 sec. Choose 5 sec to display each  
image for 5 seconds. Choose 10 sec to display each image  
for 10 seconds. Choose MUSIC to display an image for  
each MP3 sound file playback when DUAL PLAYBACK is  
ON.  
OTHERS  
SLIDE SHOW  
5 sec  
10 sec  
MUSIC  
OK  
SLIDE SHOW  
Press SYSTEM/MENU to remove the menus.  
6
Helpful Hint  
• If you select MUSIC when  
DUAL PLAYBACK is OFF, the  
playback speed will be set to 5  
seconds automatically.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 60  
60 Glossary  
AUDIO IN/OUT Jacks: jacks on the front and back of the DVD/VCR that receive  
audio from another source (IN) or send audio to another system (OUT).These jacks  
are red (right) and white (left).  
Automatic Channel Setup: process in which theVCR memorizes all available TV  
K
L
channels.Then, when you press SKIP ∑/CH or SKIP w/CH inVCR mode, you  
only scan through channels you receive.  
Bands: settings that allow you to tune channels.  
• Antenna –VHF (very high frequency; channels 2-13) and UHF (ultra high  
frequency; channels 14-69).  
• Cable – standard channels 1-125 can be available without a Cable Box.  
Cable Box/Satellite Receiver Output Channel: 03 or 04.  
COAXIAL DIGITAL AUDIO OUT jack: Sends digital audio to a Stereo, allowing  
you to adjust the volume at the Stereo.This connection provides the 5.1 channel  
surround sound as heard in movie theaters.This jack on the DVD/VCR is black.  
(
)
COMPONENTVIDEO OUT Y CB/PB  
CR/PR Jacks: jacks on the back of the  
DVD/VCR that send high-quality DVD video to a TV with ComponentVideo In jacks.  
This connection provides the best picture quality for the DVD player of the  
DVD/VCR.  
Dolby Digital: A surround sound system that provides 5.1 channel sound as used in  
movie theaters.  
Dubbing: copying a video cassette using anotherVCR.  
HQ: high quality; a feature in theVCR circuitry which provides enhanced picture  
detail.  
Line Input: The channel to which you set your DVD/VCR during video cassette  
copying. If you connected the other video equipment to the AUDIO andVIDEO In  
jacks on the front of the DVD/VCR, select L2. If you used the AUDIO andVIDEO IN  
jacks on the back of the DVD/VCR, select L1. If you accidentally enter Line Input  
K
L
mode, press SKIP ∑/CH or SKIP w/CH or the Number buttons to select  
another channel.  
OTR: One-Touch Recording; a timed recording on theVCR that starts immediately  
and records for 30 minutes to 8 hours.  
RF coaxial cable: A black cable supplied with your DVD/VCR. Use it to connect  
your DVD/VCR to your TV, Cable Box or Satellite Receiver.  
S-Video: Produces a clearer DVD picture by sending separate signals for the  
luminance and the color. S-Video only provides a picture for the DVD player of the  
DVD/VCR.  
Tape Speeds: how fast the video cassette travels during a recording or playback.The  
faster the tape speed, the better the picture quality. Slower tape speeds affect picture  
quality, but you can record more onto a videotape.  
• SP (standard playback) – fastest tape speed (recording time for a T120 tape is  
approximately 2 hours); best picture quality.  
• LP (long playback) – average tape speed.You cannot record in LP with thisVCR. If  
tapes were recorded on a differentVCR in LP speed, the tape will play in LP on the  
DVD/VCR.  
• SLP (super long playback) – slowest tape speed (recording time for a T120 tape is  
approximately 6 hours).This speed allows the maximum recording on a single  
videotape.  
VIDEO IN/OUT Jacks: jacks on the front and back of the DVD/VCR that receive  
video from another source (IN) or send video to other video equipment or a TV  
(OUT).These jacks are yellow.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 61  
Helpful Hints 61  
If you are having problems with your product, check this list of problems and possible solutions before requesting  
service.You may be able to solve the problem yourself.  
If you need to call a customer service representative, please know the model number and serial number of your  
product before you call.This information is displayed on the back of the product. Also, please take a moment to identify  
the problem you are having, and be prepared to explain this to the representative. If you believe the representative will  
need to help you with operations, please stay near the product. Our representatives will be happy to assist you.  
For online reference, please visit our web site at http://www.philips.com/usasupport  
The DVD/VCR has no power.  
•
•
Make sure the power cord is connected completely to an AC (alternating current) outlet.  
Press STANDBY-ONy to turn on the DVD/VCR.The DVD/VCR usually turns on in the mode it was in when you  
turned it off. If there has been a power failure, it will turn on inVCR mode. Press DVD to put the unit in DVD mode.  
PressVCR to put the unit inVCR mode. Or, press SOURCE on the front of the DVD/VCR to switch between the  
two modes.  
The remote control will not operate the DVD/VCR.  
•
Aim the remote control directly at the remote sensor on the front of the DVD/VCR, not toward the TV. Details are  
on page 20.  
•
•
•
•
Remove all obstacles between the remote control and the DVD/VCR.  
Inspect and/or replace the batteries in the remote control. Details are on page 15.  
Use the remote control within 23 feet of the DVD/VCR.  
When using the DVD player, press the DVD button, then try the other DVD feature buttons. Press DVD so DVD  
light appears on the front of the DVD/VCR.This means the DVD/VCR is in DVD mode.  
To use theVCR, pressVCR, then try the otherVCR feature buttons. PressVCR soVCR light appears on the front of  
the DVD/VCR.This means the DVD/VCR is inVCR mode.  
•
There is no picture in DVD mode.  
•
Make sure the video cable is connected correctly.You may connect either the yellow video cable (supplied), an  
optional S-Video cable, or optional component video cables. Make sure the TV is set to the correctVideo In channel  
(usually the AUX IN,A/V IN,Auxiliary In, EXT or External In, ComponentVideo In or S-Video In channel). Check  
your TV owner’s manual for details. Details are on pages 8 and 12-14.  
•
If you only used the supplied black RF coaxial cable, details are on pages 9-11. Make sure the TV is set to channel 3 or  
4 (the output channel of the DVD/VCR). Or, if you have a Cable Box/Satellite Receiver, make sure the TV is set to the  
Cable Box/Satellite Receiver output channel (usually 03 or 04).  
•
•
Insert a DVD that is playable on this DVD/VCR. Details are on page 7.  
Make sure the DVD/VCR is in DVD mode. Press DVD or SOURCE so DVD light appears on the front of the  
DVD/VCR.  
•
Check if Progressive Scan is set correctly according to your connection to a TV. Details are on page 8. Enable  
Progressive Scan at the DVD player only if you used the ComponentVideo connection to a TV that has Progressive  
Scan. Details are on pages 8, 12 and 54.  
Disc cannot be played.  
•
•
Insert a playable disc. Details are on page 7.  
Place the disc correctly in the disc tray. If the disc is one-sided, place the disc in the tray with the label facing up. If the  
disc is two-sided, make sure the label of the side you want to play is facing up.  
Clean the disc. Make sure the disc is not scratched or warped.  
•
•
•
Cancel the Parental Controls, enter the password, or change the control level. Details are on pages 56-57.  
Make sure the disc is labelled for use in Region 1 or ALL regions and is NTSC or PAL compatible. Details are on page 7  
.
There is no sound.  
•
Connect the audio cables firmly. Make sure the cables are connected to the AUDIO IN jacks on the TV or Stereo.  
Details are on pages 12-13.  
•
•
Check the audio settings of the DVD player. Details are on page 55.  
Check the audio settings of the DVD. For example, you may have selected “soundtrack” playback or an unavailable  
sound setting (such as Dolby Digital). Details are on pages 43 and 55. Try other sound options provided in the DVD  
disc menu.  
If you used audio cables (instead of only using the supplied black RF coaxial cable) make sure the TV or Stereo is set  
to the correct Audio In channel (usually the AUX IN,Auxiliary In,A/V IN,Audio In or External In channel). See your  
TV or Stereo owner’s manual for details.  
•
The picture is distorted.  
•
Connect the DVD/VCR directly to the TV. Details are on pages 8-14. Do not connect the DVD/VCR to aVCR, then  
connect theVCR to the TV. Copyright protection systems in theVCR could distort the picture playing on the  
DVD/VCR.  
•
There are some cases where a disc or videotape picture may be distorted slightly because of the quality in which it  
was recorded.This is not a malfunction of the DVD/VCR.  
•
•
Make sure the disc is compatible with the DVD player of the DVD/VCR. Details are on page 7.  
If your TV is not PAL compatible, DVDs recorded in the PAL color system may play only in black and white, the  
picture may roll continuously, or the picture may appear distorted.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 62  
62 Helpful Hints (cont’d)  
You cannot change the camera angle of a DVD.  
•
The DVD might not contain segments recorded from different camera angles. See if multiple angles are available by  
referring to the disc case or DVD disc menu. Details are on page 42.  
You cannot change the audio or subtitle language of a DVD.  
•
The DVD does not contain audio or subtitles in the desired language. Not all DVDs contain audio or subtitles in  
multiple languages. See if other languages are available by referring to the disc case or DVD disc menu. Details are on  
pages 42-43.  
An X appears in the top right corner of theTV screen when you try a DVD feature.  
•
The operation is not available at the current time or the feature is not available on the disc. Some features are only  
available during playback. Others can be accessed only if playback is stopped.Try stopping or playing the disc, then try  
the feature again.  
The DVD/VCR switches from DVD mode toVCR mode after 30 minutes of no activity.  
•
When AUTO POWER OFF is set to ON, the DVD/VCR switches itself from DVD mode toVCR mode if disc  
playback stops for more than 30 minutes and you press no buttons on the remote or the DVD/VCR. Details are on  
pages 58-59. This prevents possible damage to your TV’s picture tube that can occur if a still image is left on too long.  
A screen saver appears on theTV screen during DVD mode.  
•
The DVD logo will appear on the TV screen when you stop disc playback.You cannot remove it.  
You want to use the DVD player during aVCR timer recording or while “ ” appears on the display  
panel.  
•
Press STANDBY-ONy to turn on the DVD/VCR. Press DVD to choose DVD mode, then continue with other DVD  
features as described in this manual.  
A maximum of 999 MP3/JPEG files can be recognized.  
Power Failure  
•
Clock setting, language selection and channel setup may be lost if the power fails. See pages 21-23 to set up the  
channels, clock and language again.  
TheVCR will not record aTV program.  
•
•
Put the DVD/VCR inVCR mode. PressVCR or SOURCE soVCR light appears on the front of the DVD/VCR.  
Check the connections between the DVD/VCR,TV, antenna/Cable TV signal and Cable Box/Satellite Receiver (if  
applicable). Details are on pages 9-14. ForVCR features, you must connect the DVD/VCR to a TV with the RF coaxial  
cable or the yellow video cable as described on pages 9-12.  
•
Make sure the video cassette has a record tab. Details are on page 24.  
TheVCR will not perform a timer recording.  
•
•
Make sure the recording start and stop times are set correctly. Details are on pages 28-29.  
Make sure a tape is in theVCR and the tape has a record tab. Details are on page 24. If, after programming a timer  
recording, you press TIMER SET without putting a tape in the DVD/VCR,“ ” will blink on the display panel.  
•
•
•
•
•
•
•
If the record tab on a tape is missing, the DVD/VCR will eject the tape.“ ” will blink.  
Press TIMER SET to put the DVD/VCR in standby mode for the timer recording.  
Make sure theVCR clock is set. Details are on page 22.  
TheVCR may not perform or continue a timer recording if the power fails.  
If you have a Cable Box/Satellite Receiver, set timer recordings differently. Details are on page 10.  
Finish programming a timer recording at least 5 minutes before it is set to begin.  
12 p.m. is noon; 12 a.m. is midnight.  
There is no picture or the picture is noisy or has streaks during video cassette playback.  
•
•
Put the DVD/VCR inVCR mode. PressVCR or SOURCE soVCR light appears on the front of the DVD/VCR.  
If you used the supplied RF coaxial cable to connect the DVD/VCR to the TV, make sure the TV is on the same  
channel as the DVD/VCR’s output channel (03 or 04).The DVD/VCR’s output channel is channel 3 when you receive  
it.To change it to channel 4, see page 9. Make sure channel 03 or 04 is properly adjusted at the TV.  
Or, if you connected the DVD/VCR to the TV using audio and video cables, select the correctVideo In channel at the  
TV. Details are on pages 8 and 12.  
•
•
Adjust the tracking. Details are on page 33.  
TVs placed too close to the DVD/VCR can cause interference during tape playback. Move the DVD/VCR away from the TV  
.
The Number buttons won’t work forTV channels above 69.  
•
Enter channel numbers as a 2-digit number. If you want to select channels 100 and above, enter channel numbers as a  
3-digit number. If you do not have Cable TV, only channels 2-69 are available.  
TV programs cannot be watched normally.  
•
Check the connections between the DVD/VCR,TV, antenna/Cable TV signal and Cable Box/Satellite Receiver (if  
applicable). Details are on pages 9-14.  
Poor reception  
•
You may need to tune your TV again. Or, reset channels at theVCR using CHANNEL SET UP.  
Details are on page 21.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 63  
Helpful Hints (cont’d) 63  
You cannot insert a video cassette.  
•
•
•
•
Insert the tape, window side up, with the record tab facing you.  
Make sure a tape isn’t already in theVCR by pressing STOP/EJECT C A (VCR) on the front of the DVD/VCR.  
Gently push on the center of the tape when putting it in theVCR. Never force the tape into theVCR.  
If a timer recording is set, you cannot insert a tape without a record tab.  
You cannot remove the tape.  
•
•
Make sure the power plug is completely connected to a power outlet.  
If you have set a timer recording, press TIMER SET to delay the recording.“ ” will disappear from the display panel.  
Then, press STOP/EJECT C A (VCR) on the front of the DVD/VCR to  
eject the tape. Insert another tape and press TIMER SET to reset the timer recording.  
Unplug the DVD/VCR power cord for 5 minutes.Then, plug in the power cord again and press  
STANDBY-ONy on the DVD/VCR. Press STOP/EJECT C A (VCR) on the DVD/VCR 3 to 5 times. If the tape still  
does not eject, you may need to have an authorized servicer remove the tape.  
•
DVD/VCR ejects the tape when you press RECORD I orTIMER SET.  
•
Make sure the tape has a record tab. Details are on page 24.  
Satellite Receiver Hookups  
•
Watching one TV channel while recording another may not be possible if you have a Satellite Receiver. Set your TV to  
channel 03 or 04, then make your channel selections at the Satellite Receiver.  
•
With many Satellite Receiver hookups, if you use audio and video cables to connect your DVD/VCR to your TV, you  
will have to put your DVD/VCR in Line Input mode (L1 or L2).  
Line Input mode  
If you accidentally enter Line Input mode (L1 or L2 will appear on your TV screen briefly), press  
•
K
L
SKIP ∑/CH or SKIP w/CH or the Number buttons to select another channel.  
Hi-Fi Stereo Sound  
•
•
During playback, Hi-Fi audio may normally revert to normal audio when you adjust tracking.  
When connecting the DVD/VCR to a TV with the red and white audio cables, you will only get stereo sound if you  
connect the DVD/VCR AUDIO OUT jacks on the DVD/VCR to the AUDIO IN jacks on your TV, and if the TV is on  
its Audio/Video In channel. See your TV owner’s manual for details.  
•
•
When you connect the DVD/VCR AUDIO OUT jacks on the DVD/VCR to the AUDIO IN jacks on your TV, the  
stereo light on the TV might not glow. If the status display indicates you are receiving stereo, you are. Details are on  
page 34.  
Only tapes recorded in Hi-Fi audio will play in Hi-Fi audio.Tapes recorded in normal audio will play in monaural  
(single-channel) audio.  
Cleaning theVideo Heads  
•
Your DVD/VCR automatically cleans the video heads of theVCR each time you insert a tape. However, the heads may  
become dirty. If so, have an authorized servicer clean the video heads. Eventually, the heads may need to be replaced.  
The playback picture is too dim, too bright or fluctuates in brightness.  
•
Some programs may be broadcast with copyright protection technology in order to protect the rights of copyright  
owners.This technology is used on programs that are recorded on video cassettes or DVDs, as well as some  
programs broadcast by antenna/cable/satellite television channels. Programs broadcast with copyright protection may  
not record clearly. Likewise, if you play a tape that is a recording of a copyright protected program, the picture may  
not be clear.Tapes of copyright protected programs may have a picture that is dark or dim, or the brightness of the  
picture may fluctuate.Therefore, avoid recording or playing copies of copyright protected programs.  
This DVD/VCR incorporates copyright protection technology that is protected by method claims of certain U.S.  
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of  
this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and  
other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
•
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 64  
64 Care and Maintenance  
Cleaning the DVD/VCR  
• Wipe the front panel and other exterior surfaces of the DVD/VCR with a soft, slightly damp cloth.  
• Never use a solvent, thinner, benzene or alcohol to clean the DVD/VCR. Do not spray insecticide liquid  
near the DVD/VCR. Such chemicals may discolor the surface or damage the DVD/VCR.  
Cleaning a Disc  
• Use a soft, dry cloth to wipe the disc.  
• Wipe the disc in a straight line from the center to the edge. Never wipe the disc in a circular motion.  
• Do not use detergent or abrasive cleaning agents.  
• Handle the discs so fingerprints and dust do not adhere to the discs.  
• Always store the disc in its protective case when it is not in use.  
Checking the Laser  
• If the DVD/VCR does not operate as described in this manual, the DVD player’s laser may be dirty.  
Consult an Authorized Service Center for inspection and cleaning of the laser.  
Caring forVideo Cassettes  
• Use only cassettes with the  
mark.  
• Remove any light adhesive stick-on notes from the video cassette before putting the cassette in theVCR.  
Removable labels can jam theVCR.  
Caring for theVCR’sVideo Heads  
• Periodic maintenance is required to maintain your DVD/VCR’s excellent performance.TheVCR has an  
Automatic Head Cleaner. However, the video heads will require replacement eventually. Only an  
authorized service center should perform this service.  
Specifications  
VCRVideo Heads  
4 heads - Hi-Fi  
Power Requirement  
120V AC +/- 10%, 60 Hz +/- 0.5%  
Antenna  
Power Consumption  
Power on: 21 W  
VHF/UHF – 75 ohm external antenna terminal  
Power off: 3.8 W  
VHF Output Signal  
Channel 03 or 04  
75 ohms unbalanced  
OperatingTemperature  
41°F (5°C) to 104°F (40°C)  
DVD Color System  
NTSC  
Relative Humidity  
30% to 80%  
Frequency Response  
Dimensions  
DVD (linear sound):  
17.1” (W) x 3.7” (H) x 9.2” (D)  
(435mm x 94mm x 233mm)  
20 Hz to 22 kHz (sample rate: 48 kHz)  
20 Hz to 44 kHz (sample rate: 96 kHz)  
Audio CD: 20 Hz to 20 kHz  
Weight  
6.0 lbs. (2.7 kg.)  
Signal-to-Noise Ratio  
Audio CD: 100 dB JEITIA  
(Japan Electronics and InformationTechnology Industries  
Association)  
NOTE: Designs and specifications are subject to change  
without notice.  
Dynamic Range  
DVD (linear sound): 90 dB  
Audio CD: 85 dB (JEITIA)  
Total Distortion Factor  
Audio CD: 0.03% (JEITIA)  
DVD: 0.03%  
Wow and Flutter  
Below the measurement limitation  
( 0.001% W PEAK) (JEITIA)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 65  
Limited Warranty 65  
PHILIPS LIMITED WARRANTY  
ONE (1) YEAR  
WARRANTY COVERAGE:  
PHILIPS warranty obligation is limited to the terms set forth  
below.  
This warranty does not apply (a) to damage caused by accident,  
abuse, misuse, misapplication, or non-Philips product, (b) to  
damage caused by service performed by anyone other than  
Philips or Philips Authorized Service Location, (c) to a product  
or a part that has been modified without the written permis-  
sion of Philips, or (d) if any Philips serial number has been  
removed or defaced, or (e) product, accessories or consum-  
ables sold “AS IS” without warranty of any kind by including  
refurbished Philips product sold “AS IS” by some retailers.  
WHO IS COVERED:  
Philips warrants the product to the original purchaser or the  
person receiving the product as a gift against defects in materi-  
als and workmanship as based on the date of original purchase  
(“Warranty Period”) from an Authorized Dealer. The original  
sales receipt showing the product name and the purchase date  
from an authorized retailer is considered such proof.  
This Limited Warranty does not cover:  
•
•
Shipping charges to return defective product to Philips.  
Labor charges for installation or setup of the product, adjust-  
ment of customer controls on the product, and installation  
or repair of antenna systems outside of the product.  
Product repair and/or part replacement because of improper  
installation, connections to improper voltage supply, abuse,  
neglect, misuse, accident, unauthorized repair or other cause  
not within the control of Philips.  
WHAT IS COVERED:  
The Philips warranty covers new products if a defect arises and  
a valid claim is received by Philips within the Warranty Period.  
At its option, Philips will either (1) repair the product at no  
charge, using new or refurbished replacement parts, or (2)  
exchange the product with a product that is new or which has  
been manufactured from new, or serviceable used parts and is  
at least functionally equivalent or most comparable to the origi-  
nal product in Philips current inventory, or (3) refund the origi-  
nal purchase price of the product.  
•
•
Damage or claims for products not being available for use, or  
for lost data or lost software.  
•
•
Damage occurring to product during shipping.  
A product that requires modification or adaptation to enable  
it to operate in any country other than the country for  
which it was designed, manufactured, approved and/or  
authorized, or repair of products damaged by these modifica-  
tions.  
Philips warrants replacement products or parts provided under  
this warranty against defects in materials and workmanship  
from the date of the replacement or repair for ninety (90) days  
or for the remaining portion of the original product’s warranty,  
whichever provides longer coverage for you. When a product  
or part is exchanged, any replacement item becomes your  
property and the replaced item becomes Philips’ property.  
When a refund is given, your product becomes Philips’ proper-  
ty.  
•
•
•
A product used for commercial or institutional purposes  
(including but not limited to rental purposes).  
Product lost in shipment and no signature verification receipt  
can be provided.  
Note: Any product sold and identified as refurbished or  
renewed carries a ninety (90) day limited warranty.  
Failure to operate per Owner’s Manual.  
TO OBTAIN ASSISTANCE IN THE U.S.A., PUERTO  
RICO, OR U.S. VIRGIN ISLANDS…  
Contact Philips Customer Care Center at:  
1-888-PHILIPS (1-888-744-5477)  
Replacement product can only be sent if all warranty  
requirements are met. Failure to follow all require-  
ments can result in delay.  
WHAT IS NOT COVERED - EXCLUSIONS AND LIM-  
ITATIONS:  
TO OBTAIN ASSISTANCE IN CANADA…  
1-800-661-6162 (French Speaking)  
1-888-PHILIPS (1-888-744-5477) - (English or Spanish  
Speaking)  
This Limited Warranty applies only to the new products manu-  
factured by or for Philips that can be identified by the trade-  
mark, trade name, or logo affixed to it. This Limited Warranty  
does not apply to any non-Philips hardware product or any  
software, even if packaged or sold with the product. Non-  
Philips manufacturers, suppliers, or publishers may provide a  
separate warranty for their own products packaged with the  
bundled product.  
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS  
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-  
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-  
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF  
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-  
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICA-  
BLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILI-  
Philips is not liable for any damage to or loss of any programs,  
data, or other information stored on any media contained with- TY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS  
in the product, or any non-Philips product or part not covered  
by this warranty. Recovery or reinstallation of programs, data  
or other information is not covered under this Limited  
Warranty.  
PRODUCT IS LIMITED IN DURATION TO THE DURATION  
OF THIS WARRANTY.  
Some states do not allow the exclusions or limitation of inci-  
dental or consequential damages, or allow limitations on how  
long an implied warranty lasts, so the above limitations or  
exclusions may not apply to you.  
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.  
Philips, P.O. Box 671539, Marietta, GA. 30006-0026  
3121 233 48801  
Download from Www.Somanuals.com. All Manuals Search And Download.  
H982NUD_EN2 3/2/06 6:48 PM Page 66  
66 Information Index  
ac power cord . . . . . . . . . . . . . . . . .20 hookups  
rf coaxial cable . . . . . . . . . . . . . . .9-11  
angle button . . . . . . . . . . . . . . . .20, 42  
angle icon . . . . . . . . . . . . . . . . . .42, 58  
ant-in (antenna in) jack . . . . . .9-14, 20  
ant-out (antenna out) jack . . .9-11, 20  
arrow buttons . . . . . . . . . . . . . . . . .20  
audio button . . . . . . . . . . . . . . . .20, 43  
cable box/satellite receiver . . .10-11  
component video . . . . . . . . . . . . .12 safety precautions . . . . . . . . . . . . . . .4  
S-video . . . . . . . . . . . . . . . . . . . . .12 sap (second audio program) . . . . . .34  
stereo . . . . . . . . . . . . . . . . . . .13-14 search button . . . . . . . . . .20, 32, 37-38  
tv . . . . . . . . . . . . . . . . . . . . . . .9-14 searching . . . . . . . . . . . . . . . . . . .33, 36  
sensor (remote) . . . . . . . . . . . . . . . .20  
audio in/out jacks . . . . . . .12-13, 20, 27 index search . . . . . . . . . . . . . . . . . . .32 skip ∑/ch o,skip w/ch p . . . .20, 38  
audio settings . . . . . . . . . . . . . . . . . .55 initializing . . . . . . . . . . . . . . . . . . . . .50 slow button . . . . . . . . . . . . . . . .20, 33  
auto power off . . . . . . . . . . . . . .58-59  
slow motion . . . . . . . . . . . . . . . .33, 44  
auto repeat . . . . . . . . . . . . . . . . . . .31 jpeg display . . . . . . . . . . . . . . . . . . . .49 slp . . . . . . . . . . . . . . . . . . . . . . . . . .60  
automatic  
tape playback . . . . . . . . . . . . . . . .33  
jpeg playback . . . . . . . . . . . . . . . .46-47 source button . . . . . . . . . . . . . . . . .20  
sp . . . . . . . . . . . . . . . . . . . . . . . . . . .60  
tape rewind, eject . . . . . . . . . . . . .33 language (dvd) . . . . . . . . . . . . . . .51-52 specifications . . . . . . . . . . . . . . . . . .64  
a-b repeat . . . . . . . . . . . . . . . . . . . .40 language (vcr) . . . . . . . . . . . . . . . . . .23 speed button . . . . . . . . . . . . . . .20, 24  
a-b repeat button . . . . . . . . . . . .20, 40 line input mode . . . . . . . . . . . . .27, 63 standard playback . . . . . . . . . . . . . . .60  
long playback . . . . . . . . . . . . . . . . . .60 standby-on y button . . . . . . . . . . .20  
batteries . . . . . . . . . . . . . . . . . . . . . .15 lp . . . . . . . . . . . . . . . . . . . . . . . . . . .60 status display (vcr) . . . . . . . . . . . . . .23  
bit-rate display . . . . . . . . . . . . . . . . .48  
step-by-step playback . . . . . . . . . . . .39  
black level . . . . . . . . . . . . . . . . . . . .50 markers . . . . . . . . . . . . . . . . . . . . . .41 stereo broadcast  
menus . . . . . . . . . . . . . . . . . . . . . .6, 35  
hookups . . . . . . . . . . . . . . . . .13-14  
receiving/recording . . . . . . . . . . .34  
camera angle . . . . . . . . . . . . . . . . . .42 mode button . . . . . . . . . . . . . . .20, 45  
cassette compartment . . . . . . . . . . .19 mp3 display . . . . . . . . . . . . . . . . . . .49 stereo sound . . . . . . . . . . . . . . . . . .43  
channel  
adding . . . . . . . . . . . . . . . . . . . . . .21  
mp3 playback . . . . . . . . . . . . . . .46-47 stereoTV hookups . . . . . . . . . . .13-14  
still mode . . . . . . . . . . . . . . . . . . . . .54  
deleting . . . . . . . . . . . . . . . . . . . .21 number buttons . . . . . . . . . . . . . . . .20 still picture . . . . . . . . . . . . . . . . .33, 39  
selection . . . . . . . . . . . . . . . . . . . .20  
stop C button . . . . . . . . . . . . . . . . .20  
setup . . . . . . . . . . . . . . . . . . . .16, 21 ok button . . . . . . . . . . . . . . . . . . . . .20 stop/eject CA (vcr) button . . . . . . .20  
chapters . . . . . . . . . . . . . . . . . . . . . .37 on-screen status displays (vcr) . . . . .23 subtitle button . . . . . . . . . . . . . .20, 42  
clear/reset button . . . . . . . . . . . .20, 31 one-touch recording . . . . . . . . . . . .26 super high speed searching . . . . . . .33  
clock . . . . . . . . . . . . . . . . . . . . . . . .22 open/close A button . . . . . . . . .18, 20 super long playback . . . . . . . . . . . . .60  
coaxial digital audio out jack . . .14, 20  
s-video out jack . . . . . . . . . . . . .12, 20  
component video out jacks . . . .12, 20 parental . . . . . . . . . . . . . . . . . . . .56-57  
connections . . . . . . . . . . . . . . . . .8-14 parental password . . . . . . . . . . . . . .56 table of contents . . . . . . . . . . . . . . . .5  
contents, table of . . . . . . . . . . . . . . . .5 pause button . . . . . . . . . .20, 33, 39, 44 tape  
controls  
play button . . . . . . . . . . . . . .17-18, 20  
duplication . . . . . . . . . . . . . . . . . .27  
eject . . . . . . . . . . . . . . . . .20, 33, 63  
speed . . . . . . . . . . . . . . . . . . . . . .60  
dvd/vcr . . . . . . . . . . . . . . . . . . . . .20 player menu . . . . . . . . . . . . . . . . . . .51  
remote . . . . . . . . . . . . . . . . . . . . .20 playing discs . . . . . . . . . . . . . . . . . . .18  
copyright protection . . . . . . . .3, 27, 63 playing tapes . . . . . . . . . . . . . . . . . . .17 time search . . . . . . . . . . . . . . . . . . .32  
counter . . . . . . . . . . . . . . . . . . . .23, 31 power  
cord . . . . . . . . . . . . . . . . . . . . . . .20  
on light . . . . . . . . . . . . . . . . . . . . .20  
timer recording  
cancelling . . . . . . . . . . . . . . . . . . .29  
setting . . . . . . . . . . . . . . . . . . .28-29  
disc menus . . . . . . . . . . . . . . . . .35, 51  
disc tray . . . . . . . . . . . . . . . . . . . . . .19 program . . . . . . . . . . . . . . . . . . . . . .45 timer set button . . . . . . . . . . . . .20, 29  
disc/vcr menu button . . . . . . . . .20, 35 progressive scan . . . . . . . . . . . . . . . .54 title button . . . . . . . . . . . . . . . . .20, 35  
display button . . . . . . . . . . . .20, 23, 48  
titles . . . . . . . . . . . . . . . . . . . . . . . . .35  
display messages . . . . . . . . . . . . . . . .19 quick setup . . . . . . . . . . . . . . . . .51-55 tracking . . . . . . . . . . . . . . . . . . . . . .33  
display panel . . . . . . . . . . . . . . . . . . .19 tracks . . . . . . . . . . . . . . . . . . . . . . . .38  
displays . . . . . . . . . . . . . . . . .23, 48-49 random . . . . . . . . . . . . . . . . . . . . . .45 tv aspect . . . . . . . . . . . . . . . . . . .53-54  
dual playback . . . . . . . . . . . . . . . . . .47 rapid play with voice . . . . . . . . . . . .36 tv hookups . . . . . . . . . . . . . . . . . .9-14  
dolby digital . . . . . . . . . . . . . . . . . . .55 rear panel . . . . . . . . . . . . . . . . . . . . .20  
down sampling . . . . . . . . . . . . . . . . .55 rec I button . . . . . . . . . . . . .20, 24, 27 vcr  
drc (dynamic range control) . . . . . .55 record I button . . . . . . . . . .20, 24, 26  
button . . . . . . . . . . . . . . . . . . . . .20  
light . . . . . . . . . . . . . . . . . . . . . . .19  
duplication (dvd to videotape) . . . . .30 recording  
duplication (tape) . . . . . . . . . . . . . . .27  
dvd button . . . . . . . . . . . . . . . . . . . .20  
dvd light . . . . . . . . . . . . . . . . . . . . . .19  
basic . . . . . . . . . . . . . . . . . . . . . . .24 vcr/tv button . . . . . . . . . . . . . . . . . .20  
one channel/watching another . . .25 video in/out jacks . . . . . . . . . .12-14, 20  
prevention . . . . . . . . . . . . . . . . . .24 virtual surround . . . . . . . . . . . . . . . .50  
timer . . . . . . . . . . . . . . . . . . . .28-29  
ejecting a tape . . . . . . . . . . . .20, 33, 63 remote control  
warranty . . . . . . . . . . . . . . . . . . . . .65  
TM  
batteries . . . . . . . . . . . . . . . . . . . .15 Windows Media Audio display . . . . . .49  
TM  
fast forward . . . . . . . . . . . . . . . .33, 36  
D (fast forward) button . . . . . . . .20  
buttons . . . . . . . . . . . . . . . . . . . . .20  
sensor . . . . . . . . . . . . . . . . . . . . .20  
Windows Media Audio playback . .46-47  
folder playback . . . . . . . . . . . . . . . . .47 repeat button . . . . . . . . . . . . . . .20, 40 zoom . . . . . . . . . . . . . . . . . . . . . . . .44  
front panel . . . . . . . . . . . . . . . . . . . .20 repeat (discs) . . . . . . . . . . . . . . . . . .40 zoom button . . . . . . . . . . . . . . .20, 44  
repeat (tape) . . . . . . . . . . . . . . . . . .31  
glossary . . . . . . . . . . . . . . . . . . . . . .60 rerecording . . . . . . . . . . . . . . . . . . .27  
resume on . . . . . . . . . . . . . . . . . . . .39  
head cleaner . . . . . . . . . . . . . . . . . . .63 return button . . . . . . . . . . . . . . . . . .20  
This owner’s manual is made of recyclable  
materials. Remember to recycle!  
helpful hints . . . . . . . . . . . . . . . .61-63 reverse searching . . . . . . . . . . . .33, 36  
hi-fi stereo sound . . . . . . . . . . . . . . .34 E (rewind) button . . . . . . .20, 33, 36  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips CD Player CDR880BK User Manual
Philips Computer Monitor S1D13505 User Manual
Philips Electric Toothbrush HX1510 User Manual
Philips Universal Remote SBC RU 220 User Manual
Philips Work Light P 5338 G User Manual
Pioneer CD Player DEH P2500 User Manual
Planar Computer Monitor PT150M User Manual
Porter Cable Sander 7345 User Manual
Poulan Trimmer 530088836 User Manual
Powermate Portable Generator PM049650418 User Manual